diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net')
| -rw-r--r-- | Documentation/devicetree/bindings/net/dsa/dsa.txt | 5 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/net/dsa/qca8k.txt | 73 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/net/stm32-dwmac.txt | 9 |
3 files changed, 75 insertions, 12 deletions
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt index 35694c0c376b..d66a5292b9d3 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.txt +++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt @@ -71,6 +71,10 @@ properties, described in binding documents: Documentation/devicetree/bindings/net/fixed-link.txt for details. +- local-mac-address : See + Documentation/devicetree/bindings/net/ethernet.txt + for details. + Example The following example shows three switches on three MDIO busses, @@ -97,6 +101,7 @@ linked into one DSA cluster. port@1 { reg = <1>; label = "lan1"; + local-mac-address = [00 00 00 00 00 00]; }; port@2 { diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.txt b/Documentation/devicetree/bindings/net/dsa/qca8k.txt index bbcb255c3150..93a7469e70d4 100644 --- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt @@ -12,10 +12,15 @@ Required properties: Subnodes: The integrated switch subnode should be specified according to the binding -described in dsa/dsa.txt. As the QCA8K switches do not have a N:N mapping of -port and PHY id, each subnode describing a port needs to have a valid phandle -referencing the internal PHY connected to it. The CPU port of this switch is -always port 0. +described in dsa/dsa.txt. If the QCA8K switch is connect to a SoC's external +mdio-bus each subnode describing a port needs to have a valid phandle +referencing the internal PHY it is connected to. This is because there's no +N:N mapping of port and PHY id. + +Don't use mixed external and internal mdio-bus configurations, as this is +not supported by the hardware. + +The CPU port of this switch is always port 0. A CPU port node has the following optional node: @@ -31,8 +36,9 @@ For QCA8K the 'fixed-link' sub-node supports only the following properties: - 'full-duplex' (boolean, optional), to indicate that full duplex is used. When absent, half duplex is assumed. -Example: +Examples: +for the external mdio-bus configuration: &mdio0 { phy_port1: phy@0 { @@ -55,12 +61,12 @@ Example: reg = <4>; }; - switch0@0 { + switch@10 { compatible = "qca,qca8337"; #address-cells = <1>; #size-cells = <0>; - reg = <0>; + reg = <0x10>; ports { #address-cells = <1>; @@ -108,3 +114,56 @@ Example: }; }; }; + +for the internal master mdio-bus configuration: + + &mdio0 { + switch@10 { + compatible = "qca,qca8337"; + #address-cells = <1>; + #size-cells = <0>; + + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + fixed-link { + speed = 1000; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@4 { + reg = <4>; + label = "lan4"; + }; + + port@5 { + reg = <5>; + label = "wan"; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt b/Documentation/devicetree/bindings/net/stm32-dwmac.txt index 1341012722aa..a90eef11dc46 100644 --- a/Documentation/devicetree/bindings/net/stm32-dwmac.txt +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.txt @@ -14,8 +14,7 @@ Required properties: - clock-names: Should be "stmmaceth" for the host clock. Should be "mac-clk-tx" for the MAC TX clock. Should be "mac-clk-rx" for the MAC RX clock. - For MPU family need to add also "ethstp" for power mode clock and, - "syscfg-clk" for SYSCFG clock. + For MPU family need to add also "ethstp" for power mode clock - interrupt-names: Should contain a list of interrupt names corresponding to the interrupts in the interrupts property, if available. Should be "macirq" for the main MAC IRQ @@ -24,9 +23,9 @@ Required properties: encompases the glue register, and the offset of the control register. Optional properties: -- clock-names: For MPU family "mac-clk-ck" for PHY without quartz -- st,int-phyclk (boolean) : valid only where PHY do not have quartz and need to be clock - by RCC +- clock-names: For MPU family "eth-ck" for PHY without quartz +- st,eth-clk-sel (boolean) : set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125. +- st,eth-ref-clk-sel (boolean) : set this property in RMII mode when you have PHY without crystal 50MHz and want to select RCC clock instead of ETH_REF_CLK. Example: |