3 files changed, 6 insertions, 8 deletions
diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt
index 4ff65047bb9a..70af2ec12b09 100644
--- a/Documentation/devicetree/bindings/net/macb.txt
+++ b/Documentation/devicetree/bindings/net/macb.txt
@@ -10,6 +10,10 @@ Required properties:
 - interrupts: Should contain macb interrupt
 - phy-mode: String, operation mode of the PHY interface.
   Supported values are: "mii", "rmii", "gmii", "rgmii".
+- clock-names: Tuple listing input clock names.
+	Required elements: 'pclk', 'hclk'
+	Optional elements: 'tx_clk'
+- clocks: Phandles to input clocks.
 
 Optional properties:
 - local-mac-address: 6 bytes, mac address
@@ -22,4 +26,6 @@ Examples:
 		interrupts = <21>;
 		phy-mode = "rmii";
 		local-mac-address = [3a 0e 03 04 05 06];
+		clock-names = "pclk", "hclk", "tx_clk";
+		clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
 	};
diff --git a/Documentation/devicetree/bindings/net/marvell-orion-net.txt b/Documentation/devicetree/bindings/net/marvell-orion-net.txt
index a73b79f227e1..c233b6114242 100644
--- a/Documentation/devicetree/bindings/net/marvell-orion-net.txt
+++ b/Documentation/devicetree/bindings/net/marvell-orion-net.txt
@@ -32,7 +32,6 @@ Optional controller properties:
 * Ethernet port node
 
 Required port properties:
- - device_type: shall be "network".
  - compatible: shall be one of "marvell,orion-eth-port",
       "marvell,kirkwood-eth-port".
  - reg: port number relative to ethernet controller, shall be 0, 1, or 2.
@@ -61,7 +60,6 @@ or
 mdio-bus {
 	...
 	ethphy: ethernet-phy@8 {
-		device_type = "ethernet-phy";
 		...
 	};
 };
@@ -75,7 +73,6 @@ eth: ethernet-controller@72000 {
 	marvell,tx-checksum-limit = <1600>;
 
 	ethernet@0 {
-		device_type = "network";
 		compatible = "marvell,orion-eth-port";
 		reg = <0>;
 		interrupts = <29>;
diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt
index f648094abc35..58307d0931c8 100644
--- a/Documentation/devicetree/bindings/net/phy.txt
+++ b/Documentation/devicetree/bindings/net/phy.txt
@@ -2,7 +2,6 @@ PHY nodes
 
 Required properties:
 
- - device_type : Should be "ethernet-phy"
  - interrupts : <a b> where a is the interrupt number and b is a
    field that represents an encoding of the sense and level
    information for the interrupt.  This should be encoded based on
@@ -11,8 +10,6 @@ Required properties:
  - interrupt-parent : the phandle for the interrupt controller that
    services interrupts for this device.
  - reg : The ID number for the phy, usually a small integer
- - linux,phandle :  phandle for this node; likely referenced by an
-   ethernet controller node.
 
 Optional Properties:
 
@@ -28,9 +25,7 @@ Example:
 
 ethernet-phy@0 {
 	compatible = "ethernet-phy-ieee802.3-c22";
-	linux,phandle = <2452000>;
 	interrupt-parent = <40000>;
 	interrupts = <35 1>;
 	reg = <0>;
-	device_type = "ethernet-phy";
 };