1 files changed, 0 insertions, 119 deletions
diff --git a/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt b/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt
deleted file mode 100644
index 694987d3c17a..000000000000
--- a/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt
+++ /dev/null
@@ -1,119 +0,0 @@
-Properties for an MDIO bus multiplexer/switch controlled by GPIO pins.
-
-This is a special case of a MDIO bus multiplexer.  One or more GPIO
-lines are used to control which child bus is connected.
-
-Required properties in addition to the generic multiplexer properties:
-
-- compatible : mdio-mux-gpio.
-- gpios : GPIO specifiers for each GPIO line.  One or more must be specified.
-
-
-Example :
-
-	/* The parent MDIO bus. */
-	smi1: mdio@1180000001900 {
-		compatible = "cavium,octeon-3860-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x11800 0x00001900 0x0 0x40>;
-	};
-
-	/*
-	   An NXP sn74cbtlv3253 dual 1-of-4 switch controlled by a
-	   pair of GPIO lines.  Child busses 2 and 3 populated with 4
-	   PHYs each.
-	 */
-	mdio-mux {
-		compatible = "mdio-mux-gpio";
-		gpios = <&gpio1 3 0>, <&gpio1 4 0>;
-		mdio-parent-bus = <&smi1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		mdio@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			phy11: ethernet-phy@1 {
-				reg = <1>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <10 8>; /* Pin 10, active low */
-			};
-			phy12: ethernet-phy@2 {
-				reg = <2>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <10 8>; /* Pin 10, active low */
-			};
-			phy13: ethernet-phy@3 {
-				reg = <3>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <10 8>; /* Pin 10, active low */
-			};
-			phy14: ethernet-phy@4 {
-				reg = <4>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <10 8>; /* Pin 10, active low */
-			};
-		};
-
-		mdio@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			phy21: ethernet-phy@1 {
-				reg = <1>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <12 8>; /* Pin 12, active low */
-			};
-			phy22: ethernet-phy@2 {
-				reg = <2>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <12 8>; /* Pin 12, active low */
-			};
-			phy23: ethernet-phy@3 {
-				reg = <3>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <12 8>; /* Pin 12, active low */
-			};
-			phy24: ethernet-phy@4 {
-				reg = <4>;
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <12 8>; /* Pin 12, active low */
-			};
-		};
-	};