diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mfd')
27 files changed, 0 insertions, 36 deletions
diff --git a/Documentation/devicetree/bindings/mfd/ac100.txt b/Documentation/devicetree/bindings/mfd/ac100.txt index b8ef00667599..dff219f07493 100644 --- a/Documentation/devicetree/bindings/mfd/ac100.txt +++ b/Documentation/devicetree/bindings/mfd/ac100.txt @@ -10,7 +10,6 @@ Required properties: - sub-nodes: - codec - compatible: "x-powers,ac100-codec" - - interrupt-parent: The parent interrupt controller - interrupts: SoC NMI / GPIO interrupt connected to the IRQ_AUDIO pin - #clock-cells: Shall be 0 @@ -20,9 +19,6 @@ Required properties: - rtc - compatible: "x-powers,ac100-rtc" - - interrupt-parent: The parent interrupt controller - - interrupts: SoC NMI / GPIO interrupt connected to the - IRQ_RTC pin - clocks: A phandle to the codec's "4M_adda" clock - #clock-cells: Shall be 1 - clock-output-names: "cko1_rtc", "cko2_rtc", "cko3_rtc" diff --git a/Documentation/devicetree/bindings/mfd/altera-a10sr.txt b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt index c8a736554b4b..a688520dd87d 100644 --- a/Documentation/devicetree/bindings/mfd/altera-a10sr.txt +++ b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt @@ -5,7 +5,6 @@ Required parent device properties: - spi-max-frequency : Maximum SPI frequency. - reg : The SPI Chip Select address for the Arria10 System Resource chip -- interrupt-parent : The parent interrupt controller. - interrupts : The interrupt line the device is connected to. - interrupt-controller : Marks the device node as an interrupt controller. - #interrupt-cells : The number of cells to describe an IRQ, should be 2. diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt index a014afb07902..9b62831fdf3e 100644 --- a/Documentation/devicetree/bindings/mfd/arizona.txt +++ b/Documentation/devicetree/bindings/mfd/arizona.txt @@ -22,7 +22,6 @@ Required properties: connected to. - interrupt-controller : Arizona class devices contain interrupt controllers and may provide interrupt services to other devices. - - interrupt-parent : The parent interrupt controller. - #interrupt-cells: the number of cells to describe an IRQ, this should be 2. The first cell is the IRQ number. The second cell is the flags, encoded as the trigger masks from diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt index d1762f3b30af..62091f6b025e 100644 --- a/Documentation/devicetree/bindings/mfd/axp20x.txt +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt @@ -28,7 +28,6 @@ Required properties: * "x-powers,axp809" * "x-powers,axp813" - reg: The I2C slave address or RSB hardware address for the AXP chip -- interrupt-parent: The parent interrupt controller - interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin - interrupt-controller: The PMIC has its own internal IRQs - #interrupt-cells: Should be set to 1 diff --git a/Documentation/devicetree/bindings/mfd/bd9571mwv.txt b/Documentation/devicetree/bindings/mfd/bd9571mwv.txt index 25d1f697eb25..8c4678650d1a 100644 --- a/Documentation/devicetree/bindings/mfd/bd9571mwv.txt +++ b/Documentation/devicetree/bindings/mfd/bd9571mwv.txt @@ -3,7 +3,6 @@ Required properties: - compatible : Should be "rohm,bd9571mwv". - reg : I2C slave address. - - interrupt-parent : Phandle to the parent interrupt controller. - interrupts : The interrupt line the device is connected to. - interrupt-controller : Marks the device node as an interrupt controller. - #interrupt-cells : The number of cells to describe an IRQ, should be 2. diff --git a/Documentation/devicetree/bindings/mfd/bfticu.txt b/Documentation/devicetree/bindings/mfd/bfticu.txt index 65c90776c620..538192fda9ae 100644 --- a/Documentation/devicetree/bindings/mfd/bfticu.txt +++ b/Documentation/devicetree/bindings/mfd/bfticu.txt @@ -10,7 +10,6 @@ Required properties: - interrupts: the main IRQ line to signal the collected IRQs - #interrupt-cells : is 2 and their usage is compliant to the 2 cells variant of Documentation/devicetree/bindings/interrupt-controller/interrupts.txt -- interrupt-parent: the parent IRQ ctrl the main IRQ is connected to - reg: access on the parent local bus (chip select, offset in chip select, size) Example: diff --git a/Documentation/devicetree/bindings/mfd/da9055.txt b/Documentation/devicetree/bindings/mfd/da9055.txt index 6dab34d34fce..131a53283e17 100644 --- a/Documentation/devicetree/bindings/mfd/da9055.txt +++ b/Documentation/devicetree/bindings/mfd/da9055.txt @@ -22,8 +22,6 @@ Documentation/devicetree/bindings/sound/da9055.txt Required properties: - compatible : Should be "dlg,da9055-pmic" - reg: Specifies the I2C slave address (defaults to 0x5a but can be modified) -- interrupt-parent: Specifies the phandle of the interrupt controller to which - the IRQs from da9055 are delivered to. - interrupts: IRQ line info for da9055 chip. - interrupt-controller: da9055 has internal IRQs (has own IRQ domain). - #interrupt-cells: Should be 1, is the local IRQ number for da9055. diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt index c0a418c27e9d..edca653a5777 100644 --- a/Documentation/devicetree/bindings/mfd/da9062.txt +++ b/Documentation/devicetree/bindings/mfd/da9062.txt @@ -32,8 +32,6 @@ Required properties: "dlg,da9061" for DA9061 - reg : Specifies the I2C slave address (this defaults to 0x58 but it can be modified to match the chip's OTP settings). -- interrupt-parent : Specifies the reference to the interrupt controller for - the DA9062 or DA9061. - interrupts : IRQ line information. - interrupt-controller diff --git a/Documentation/devicetree/bindings/mfd/da9063.txt b/Documentation/devicetree/bindings/mfd/da9063.txt index 443e68286957..8da879935c59 100644 --- a/Documentation/devicetree/bindings/mfd/da9063.txt +++ b/Documentation/devicetree/bindings/mfd/da9063.txt @@ -16,8 +16,6 @@ Required properties: - compatible : Should be "dlg,da9063" or "dlg,da9063l" - reg : Specifies the I2C slave address (this defaults to 0x58 but it can be modified to match the chip's OTP settings). -- interrupt-parent : Specifies the reference to the interrupt controller for - the DA9063. - interrupts : IRQ line information. - interrupt-controller diff --git a/Documentation/devicetree/bindings/mfd/da9150.txt b/Documentation/devicetree/bindings/mfd/da9150.txt index fd4dca7f4aba..f09b41fbdf47 100644 --- a/Documentation/devicetree/bindings/mfd/da9150.txt +++ b/Documentation/devicetree/bindings/mfd/da9150.txt @@ -13,8 +13,6 @@ da9150-fg : Battery Fuel-Gauge Required properties: - compatible : Should be "dlg,da9150" - reg: Specifies the I2C slave address -- interrupt-parent: Specifies the phandle of the interrupt controller to which - the IRQs from da9150 are delivered to. - interrupts: IRQ line info for da9150 chip. - interrupt-controller: da9150 has internal IRQs (own IRQ domain). (See ../interrupt-controller/interrupts.txt for diff --git a/Documentation/devicetree/bindings/mfd/max14577.txt b/Documentation/devicetree/bindings/mfd/max14577.txt index 236264c10b92..fc6f0f4e8beb 100644 --- a/Documentation/devicetree/bindings/mfd/max14577.txt +++ b/Documentation/devicetree/bindings/mfd/max14577.txt @@ -11,7 +11,6 @@ Required properties: - compatible : Must be "maxim,max14577" or "maxim,max77836". - reg : I2C slave address for the max14577 chip (0x25 for max14577/max77836) - interrupts : IRQ line for the chip. -- interrupt-parent : The parent interrupt controller. Required nodes: diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt index 0f2587fa42cb..42968b7144e0 100644 --- a/Documentation/devicetree/bindings/mfd/max77686.txt +++ b/Documentation/devicetree/bindings/mfd/max77686.txt @@ -15,7 +15,6 @@ Required properties: - compatible : Must be "maxim,max77686"; - reg : Specifies the i2c slave address of PMIC block. - interrupts : This i2c device has an IRQ line connected to the main SoC. -- interrupt-parent : The parent interrupt controller. Example: diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt index e6754974a745..a3c60a7a3be1 100644 --- a/Documentation/devicetree/bindings/mfd/max77693.txt +++ b/Documentation/devicetree/bindings/mfd/max77693.txt @@ -14,7 +14,6 @@ Required properties: - compatible : Must be "maxim,max77693". - reg : Specifies the i2c slave address of PMIC block. - interrupts : This i2c device has an IRQ line connected to the main SoC. -- interrupt-parent : The parent interrupt controller. Optional properties: - regulators : The regulators of max77693 have to be instantiated under subnode diff --git a/Documentation/devicetree/bindings/mfd/max77802.txt b/Documentation/devicetree/bindings/mfd/max77802.txt index f2f3fe75901c..09decac20d91 100644 --- a/Documentation/devicetree/bindings/mfd/max77802.txt +++ b/Documentation/devicetree/bindings/mfd/max77802.txt @@ -14,7 +14,6 @@ Required properties: - compatible : Must be "maxim,max77802" - reg : Specifies the I2C slave address of PMIC block. - interrupts : I2C device IRQ line connected to the main SoC. -- interrupt-parent : The parent interrupt controller. Example: diff --git a/Documentation/devicetree/bindings/mfd/max8998.txt b/Documentation/devicetree/bindings/mfd/max8998.txt index 23a3650ff2a2..5f2f07c09c90 100644 --- a/Documentation/devicetree/bindings/mfd/max8998.txt +++ b/Documentation/devicetree/bindings/mfd/max8998.txt @@ -20,8 +20,6 @@ Required properties: - reg: Specifies the i2c slave address of the pmic block. It should be 0x66. Optional properties: -- interrupt-parent: Specifies the phandle of the interrupt controller to which - the interrupts from MAX8998 are routed to. - interrupts: Interrupt specifiers for two interrupt sources. - First interrupt specifier is for main interrupt. - Second interrupt specifier is for power-on/-off interrupt. diff --git a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt index c639705a98ef..5ddcc8f4febc 100644 --- a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt +++ b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt @@ -3,7 +3,6 @@ Motorola CPCAP PMIC device tree binding Required properties: - compatible : One or both of "motorola,cpcap" or "ste,6556002" - reg : SPI chip select -- interrupt-parent : The parent interrupt controller - interrupts : The interrupt line the device is connected to - interrupt-controller : Marks the device node as an interrupt controller - #interrupt-cells : The number of cells to describe an IRQ, should be 2 diff --git a/Documentation/devicetree/bindings/mfd/palmas.txt b/Documentation/devicetree/bindings/mfd/palmas.txt index 8ae1a32bfb7e..e736ab3012a6 100644 --- a/Documentation/devicetree/bindings/mfd/palmas.txt +++ b/Documentation/devicetree/bindings/mfd/palmas.txt @@ -25,7 +25,6 @@ and also the generic series names The first cell is the IRQ number. The second cell is the flags, encoded as the trigger masks from Documentation/devicetree/bindings/interrupt-controller/interrupts.txt -- interrupt-parent : The parent interrupt controller. Optional properties: ti,mux-padX : set the pad register X (1-2) to the correct muxing for the diff --git a/Documentation/devicetree/bindings/mfd/retu.txt b/Documentation/devicetree/bindings/mfd/retu.txt index 876242394a16..df3005dd3e3c 100644 --- a/Documentation/devicetree/bindings/mfd/retu.txt +++ b/Documentation/devicetree/bindings/mfd/retu.txt @@ -9,7 +9,6 @@ Required properties: - compatible: "nokia,retu" or "nokia,tahvo" - reg: Specifies the CBUS slave address of the ASIC chip - interrupts: The interrupt line the device is connected to -- interrupt-parent: The parent interrupt controller Example: diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt index 91b65227afeb..1683ec3245bc 100644 --- a/Documentation/devicetree/bindings/mfd/rk808.txt +++ b/Documentation/devicetree/bindings/mfd/rk808.txt @@ -10,7 +10,6 @@ Required properties: - compatible: "rockchip,rk808" - compatible: "rockchip,rk818" - reg: I2C slave address -- interrupt-parent: The parent interrupt controller. - interrupts: the interrupt outputs of the controller. - #clock-cells: from common clock binding; shall be set to 1 (multiple clock outputs). See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. diff --git a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt index cdd079bfc287..c68cdd365153 100644 --- a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt +++ b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt @@ -31,8 +31,6 @@ Required properties: - reg: Specifies the I2C slave address of the pmic block. It should be 0x66. Optional properties: - - interrupt-parent: Specifies the phandle of the interrupt controller to which - the interrupts from s2mps11 are delivered to. - interrupts: Interrupt specifiers for interrupt sources. - samsung,s2mps11-wrstbi-ground: Indicates that WRSTBI pin of PMIC is pulled down. When the system is suspended it will always go down thus triggerring diff --git a/Documentation/devicetree/bindings/mfd/stmpe.txt b/Documentation/devicetree/bindings/mfd/stmpe.txt index f9065a5781a2..c797c05cd3c2 100644 --- a/Documentation/devicetree/bindings/mfd/stmpe.txt +++ b/Documentation/devicetree/bindings/mfd/stmpe.txt @@ -10,7 +10,6 @@ Required properties: Optional properties: - interrupts : The interrupt outputs from the controller - interrupt-controller : Marks the device node as an interrupt controller - - interrupt-parent : Specifies which IRQ controller we're connected to - wakeup-source : Marks the input device as wakable - st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024 - irq-gpio : If present, which GPIO to use for event IRQ diff --git a/Documentation/devicetree/bindings/mfd/tc3589x.txt b/Documentation/devicetree/bindings/mfd/tc3589x.txt index 23fc2f21f5a4..4f22b2b07dc5 100644 --- a/Documentation/devicetree/bindings/mfd/tc3589x.txt +++ b/Documentation/devicetree/bindings/mfd/tc3589x.txt @@ -15,7 +15,6 @@ Required properties: - compatible : must be "toshiba,tc35890", "toshiba,tc35892", "toshiba,tc35893", "toshiba,tc35894", "toshiba,tc35895" or "toshiba,tc35896" - reg : I2C address of the device - - interrupt-parent : specifies which IRQ controller we're connected to - interrupts : the interrupt on the parent the controller is connected to - interrupt-controller : marks the device node as an interrupt controller - #interrupt-cells : should be <1>, the first cell is the IRQ offset on this diff --git a/Documentation/devicetree/bindings/mfd/tps65086.txt b/Documentation/devicetree/bindings/mfd/tps65086.txt index 9cfa886fe99f..67eac0ed32df 100644 --- a/Documentation/devicetree/bindings/mfd/tps65086.txt +++ b/Documentation/devicetree/bindings/mfd/tps65086.txt @@ -3,7 +3,6 @@ Required properties: - compatible : Should be "ti,tps65086". - reg : I2C slave address. - - interrupt-parent : Phandle to the parent interrupt controller. - interrupts : The interrupt line the device is connected to. - interrupt-controller : Marks the device node as an interrupt controller. - #interrupt-cells : The number of cells to describe an IRQ, should be 2. diff --git a/Documentation/devicetree/bindings/mfd/tps65912.txt b/Documentation/devicetree/bindings/mfd/tps65912.txt index 717e66d23142..8becb183a48e 100644 --- a/Documentation/devicetree/bindings/mfd/tps65912.txt +++ b/Documentation/devicetree/bindings/mfd/tps65912.txt @@ -3,7 +3,6 @@ Required properties: - compatible : Should be "ti,tps65912". - reg : Slave address or chip select number (I2C / SPI). - - interrupt-parent : The parent interrupt controller. - interrupts : The interrupt line the device is connected to. - interrupt-controller : Marks the device node as an interrupt controller. - #interrupt-cells : The number of cells to describe an IRQ, should be 2. diff --git a/Documentation/devicetree/bindings/mfd/twl-familly.txt b/Documentation/devicetree/bindings/mfd/twl-familly.txt index a66fcf946759..56f244b5d8a4 100644 --- a/Documentation/devicetree/bindings/mfd/twl-familly.txt +++ b/Documentation/devicetree/bindings/mfd/twl-familly.txt @@ -16,7 +16,6 @@ Required properties: - interrupt-controller : Since the twl support several interrupts internally, it is considered as an interrupt controller cascaded to the SoC one. - #interrupt-cells = <1>; -- interrupt-parent : The parent interrupt controller. Optional node: - Child nodes contain in the twl. The twl family is made of several variants diff --git a/Documentation/devicetree/bindings/mfd/twl6040.txt b/Documentation/devicetree/bindings/mfd/twl6040.txt index 9a98ee7c323d..06e9dd7a0d96 100644 --- a/Documentation/devicetree/bindings/mfd/twl6040.txt +++ b/Documentation/devicetree/bindings/mfd/twl6040.txt @@ -9,7 +9,6 @@ Required properties: - compatible : "ti,twl6040" for twl6040, "ti,twl6041" for twl6041 - reg: must be 0x4b for i2c address - interrupts: twl6040 has one interrupt line connecteded to the main SoC -- interrupt-parent: The parent interrupt controller - gpio-controller: - #gpio-cells = <1>: twl6040 provides GPO lines. - #clock-cells = <0>; twl6040 is a provider of pdmclk which is used by McPDM diff --git a/Documentation/devicetree/bindings/mfd/wm831x.txt b/Documentation/devicetree/bindings/mfd/wm831x.txt index 505709403d3f..6b84b1b0d018 100644 --- a/Documentation/devicetree/bindings/mfd/wm831x.txt +++ b/Documentation/devicetree/bindings/mfd/wm831x.txt @@ -22,7 +22,6 @@ Required properties: - interrupts : The interrupt line the IRQ signal for the device is connected to. - - interrupt-parent : The parent interrupt controller. - interrupt-controller : wm831x devices contain interrupt controllers and may provide interrupt services to other devices. |