diff options
Diffstat (limited to 'Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi-props.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi-props.yaml | 144 |
1 files changed, 144 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi-props.yaml b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi-props.yaml new file mode 100644 index 000000000000..475e4095068c --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi-props.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/st,stm32-fmc2-ebi-props.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Peripheral properties for ST FMC2 Controller + +maintainers: + - Christophe Kerello <christophe.kerello@foss.st.com> + - Marek Vasut <marex@denx.de> + +properties: + st,fmc2-ebi-cs-transaction-type: + description: | + Select one of the transactions type supported + 0: Asynchronous mode 1 SRAM/FRAM. + 1: Asynchronous mode 1 PSRAM. + 2: Asynchronous mode A SRAM/FRAM. + 3: Asynchronous mode A PSRAM. + 4: Asynchronous mode 2 NOR. + 5: Asynchronous mode B NOR. + 6: Asynchronous mode C NOR. + 7: Asynchronous mode D NOR. + 8: Synchronous read synchronous write PSRAM. + 9: Synchronous read asynchronous write PSRAM. + 10: Synchronous read synchronous write NOR. + 11: Synchronous read asynchronous write NOR. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 11 + + st,fmc2-ebi-cs-cclk-enable: + description: Continuous clock enable (first bank must be configured + in synchronous mode). The FMC_CLK is generated continuously + during asynchronous and synchronous access. By default, the + FMC_CLK is only generated during synchronous access. + $ref: /schemas/types.yaml#/definitions/flag + + st,fmc2-ebi-cs-mux-enable: + description: Address/Data multiplexed on databus (valid only with + NOR and PSRAM transactions type). By default, Address/Data + are not multiplexed. + $ref: /schemas/types.yaml#/definitions/flag + + st,fmc2-ebi-cs-buswidth: + description: Data bus width + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 8, 16 ] + default: 16 + + st,fmc2-ebi-cs-waitpol-high: + description: Wait signal polarity (NWAIT signal active high). + By default, NWAIT is active low. + $ref: /schemas/types.yaml#/definitions/flag + + st,fmc2-ebi-cs-waitcfg-enable: + description: The NWAIT signal indicates wheither the data from the + device are valid or if a wait state must be inserted when accessing + the device in synchronous mode. By default, the NWAIT signal is + active one data cycle before wait state. + $ref: /schemas/types.yaml#/definitions/flag + + st,fmc2-ebi-cs-wait-enable: + description: The NWAIT signal is enabled (its level is taken into + account after the programmed latency period to insert wait states + if asserted). By default, the NWAIT signal is disabled. + $ref: /schemas/types.yaml#/definitions/flag + + st,fmc2-ebi-cs-asyncwait-enable: + description: The NWAIT signal is taken into account during asynchronous + transactions. By default, the NWAIT signal is not taken into account + during asynchronous transactions. + $ref: /schemas/types.yaml#/definitions/flag + + st,fmc2-ebi-cs-cpsize: + description: CRAM page size. The controller splits the burst access + when the memory page is reached. By default, no burst split when + crossing page boundary. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 128, 256, 512, 1024 ] + default: 0 + + st,fmc2-ebi-cs-byte-lane-setup-ns: + description: This property configures the byte lane setup timing + defined in nanoseconds from NBLx low to Chip Select NEx low. + + st,fmc2-ebi-cs-address-setup-ns: + description: This property defines the duration of the address setup + phase in nanoseconds used for asynchronous read/write transactions. + + st,fmc2-ebi-cs-address-hold-ns: + description: This property defines the duration of the address hold + phase in nanoseconds used for asynchronous multiplexed read/write + transactions. + + st,fmc2-ebi-cs-data-setup-ns: + description: This property defines the duration of the data setup phase + in nanoseconds used for asynchronous read/write transactions. + + st,fmc2-ebi-cs-bus-turnaround-ns: + description: This property defines the delay in nanoseconds between the + end of current read/write transaction and the next transaction. + + st,fmc2-ebi-cs-data-hold-ns: + description: This property defines the duration of the data hold phase + in nanoseconds used for asynchronous read/write transactions. + + st,fmc2-ebi-cs-clk-period-ns: + description: This property defines the FMC_CLK output signal period in + nanoseconds. + + st,fmc2-ebi-cs-data-latency-ns: + description: This property defines the data latency before reading or + writing the first data in nanoseconds. + + st,fmc2-ebi-cs-write-address-setup-ns: + description: This property defines the duration of the address setup + phase in nanoseconds used for asynchronous write transactions. + + st,fmc2-ebi-cs-write-address-hold-ns: + description: This property defines the duration of the address hold + phase in nanoseconds used for asynchronous multiplexed write + transactions. + + st,fmc2-ebi-cs-write-data-setup-ns: + description: This property defines the duration of the data setup + phase in nanoseconds used for asynchronous write transactions. + + st,fmc2-ebi-cs-write-bus-turnaround-ns: + description: This property defines the delay between the end of current + write transaction and the next transaction in nanoseconds. + + st,fmc2-ebi-cs-write-data-hold-ns: + description: This property defines the duration of the data hold phase + in nanoseconds used for asynchronous write transactions. + + st,fmc2-ebi-cs-max-low-pulse-ns: + description: This property defines the maximum chip select low pulse + duration in nanoseconds for synchronous transactions. When this timing + reaches 0, the controller splits the current access, toggles NE to + allow device refresh and restarts a new access. + +additionalProperties: true |