diff options
Diffstat (limited to 'Documentation/devicetree/bindings/input')
13 files changed, 156 insertions, 13 deletions
diff --git a/Documentation/devicetree/bindings/input/ads7846.txt b/Documentation/devicetree/bindings/input/ads7846.txt index df8b1279491d..33a1638b61d6 100644 --- a/Documentation/devicetree/bindings/input/ads7846.txt +++ b/Documentation/devicetree/bindings/input/ads7846.txt @@ -65,6 +65,7 @@ Optional properties: pendown-gpio GPIO handle describing the pin the !PENIRQ line is connected to. wakeup-source use any event on touchscreen as wakeup event. + (Legacy property support: "linux,wakeup") Example for a TSC2046 chip connected to an McSPI controller of an OMAP SoC:: @@ -86,6 +87,6 @@ Example for a TSC2046 chip connected to an McSPI controller of an OMAP SoC:: ti,x-plate-ohms = /bits/ 16 <40>; ti,pressure-max = /bits/ 16 <255>; - linux,wakeup; + wakeup-source; }; }; diff --git a/Documentation/devicetree/bindings/input/da9062-onkey.txt b/Documentation/devicetree/bindings/input/da9062-onkey.txt new file mode 100644 index 000000000000..ab0e0488fe92 --- /dev/null +++ b/Documentation/devicetree/bindings/input/da9062-onkey.txt @@ -0,0 +1,32 @@ +* Dialog DA9062/63 OnKey Module + +This module is part of the DA9062/DA9063. For more details about entire +chips see Documentation/devicetree/bindings/mfd/da9062.txt and +Documentation/devicetree/bindings/mfd/da9063.txt + +This module provides KEY_POWER, KEY_SLEEP and events. + +Required properties: + +- compatible: should be one of: + dlg,da9062-onkey + dlg,da9063-onkey + +Optional properties: + + - dlg,disable-key-power : Disable power-down using a long key-press. If this + entry exists the OnKey driver will remove support for the KEY_POWER key + press. If this entry does not exist then by default the key-press + triggered power down is enabled and the OnKey will support both KEY_POWER + and KEY_SLEEP. + +Example: + + pmic0: da9062@58 { + + onkey { + compatible = "dlg,da9063-onkey"; + dlg,disable-key-power; + }; + + }; diff --git a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt index 5b91f5a3bd5c..95d0fb11a787 100644 --- a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt +++ b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt @@ -13,14 +13,22 @@ Subnode properties: - gpios: OF device-tree gpio specification. - label: Descriptive name of the key. - - linux,code: Keycode to emit. + - linux,code: Key / Axis code to emit. Optional subnode-properties: - linux,input-type: Specify event type this button/key generates. If not specified defaults to <1> == EV_KEY. + - linux,input-value: If linux,input-type is EV_ABS or EV_REL then this + value is sent for events this button generates when pressed. + EV_ABS/EV_REL axis will generate an event with a value of 0 when + all buttons with linux,input-type == type and linux,code == axis + are released. This value is interpreted as a signed 32 bit value, + e.g. to make a button generate a value of -1 use: + linux,input-value = <0xffffffff>; /* -1 */ - debounce-interval: Debouncing interval time in milliseconds. If not specified defaults to 5. - wakeup-source: Boolean, button can wake-up the system. + (Legacy property supported: "gpio-key,wakeup") Example nodes: diff --git a/Documentation/devicetree/bindings/input/gpio-keys.txt b/Documentation/devicetree/bindings/input/gpio-keys.txt index 072bf7573c37..cf1333d1dd52 100644 --- a/Documentation/devicetree/bindings/input/gpio-keys.txt +++ b/Documentation/devicetree/bindings/input/gpio-keys.txt @@ -24,6 +24,7 @@ Optional subnode-properties: - debounce-interval: Debouncing interval time in milliseconds. If not specified defaults to 5. - wakeup-source: Boolean, button can wake-up the system. + (Legacy property supported: "gpio-key,wakeup") - linux,can-disable: Boolean, indicates that button is connected to dedicated (not shared) interrupt which can be disabled to suppress events from the button. diff --git a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt index 4d86059c370c..d0ea09ba249f 100644 --- a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt +++ b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt @@ -20,6 +20,7 @@ Required Properties: Optional Properties: - linux,no-autorepeat: do no enable autorepeat feature. - wakeup-source: use any event on keypad as wakeup event. + (Legacy property supported: "linux,wakeup") - debounce-delay-ms: debounce interval in milliseconds - col-scan-delay-us: delay, measured in microseconds, that is needed before we can scan keypad after activating column gpio diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.txt b/Documentation/devicetree/bindings/input/hid-over-i2c.txt new file mode 100644 index 000000000000..488edcb264c4 --- /dev/null +++ b/Documentation/devicetree/bindings/input/hid-over-i2c.txt @@ -0,0 +1,28 @@ +* HID over I2C Device-Tree bindings + +HID over I2C provides support for various Human Interface Devices over the +I2C bus. These devices can be for example touchpads, keyboards, touch screens +or sensors. + +The specification has been written by Microsoft and is currently available here: +http://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx + +If this binding is used, the kernel module i2c-hid will handle the communication +with the device and the generic hid core layer will handle the protocol. + +Required properties: +- compatible: must be "hid-over-i2c" +- reg: i2c slave address +- hid-descr-addr: HID descriptor address +- interrupt-parent: the phandle for the interrupt controller +- interrupts: interrupt line + +Example: + + i2c-hid-dev@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + hid-descr-addr = <0x0020>; + interrupt-parent = <&gpx3>; + interrupts = <3 2>; + }; diff --git a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt index 0382b8bd69c6..1faa7292e21f 100644 --- a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt +++ b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt @@ -29,7 +29,8 @@ matrix-keyboard bindings: - nvidia,debounce-delay-ms: delay in milliseconds per row scan for debouncing - nvidia,repeat-delay-ms: delay in milliseconds before repeat starts - nvidia,ghost-filter: enable ghost filtering for this device -- nvidia,wakeup-source: configure keyboard as a wakeup source for suspend/resume +- wakeup-source: configure keyboard as a wakeup source for suspend/resume + (Legacy property supported: "nvidia,wakeup-source") Example: diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt index ee6215681182..4a9dc6ba96b1 100644 --- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt +++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt @@ -37,6 +37,7 @@ PROPERTIES Usage: optional Value type: <bool> Definition: use any event on keypad as wakeup event. + (Legacy property supported: "linux,keypad-wakeup") - keypad,num-rows: Usage: required diff --git a/Documentation/devicetree/bindings/input/rotary-encoder.txt b/Documentation/devicetree/bindings/input/rotary-encoder.txt index 331549593ed5..de99cbbbf6da 100644 --- a/Documentation/devicetree/bindings/input/rotary-encoder.txt +++ b/Documentation/devicetree/bindings/input/rotary-encoder.txt @@ -14,7 +14,17 @@ Optional properties: device, hence no steps need to be passed. - rotary-encoder,rollover: Automatic rollove when the rotary value becomes greater than the specified steps or smaller than 0. For absolute axis only. +- rotary-encoder,steps-per-period: Number of steps (stable states) per period. + The values have the following meaning: + 1: Full-period mode (default) + 2: Half-period mode + 4: Quarter-period mode +- wakeup-source: Boolean, rotary encoder can wake up the system. + +Deprecated properties: - rotary-encoder,half-period: Makes the driver work on half-period mode. + This property is deprecated. Instead, a 'steps-per-period ' value should + be used, such as "rotary-encoder,steps-per-period = <2>". See Documentation/input/rotary-encoder.txt for more information. diff --git a/Documentation/devicetree/bindings/input/samsung-keypad.txt b/Documentation/devicetree/bindings/input/samsung-keypad.txt index 863e77f619dc..5305e74e5742 100644 --- a/Documentation/devicetree/bindings/input/samsung-keypad.txt +++ b/Documentation/devicetree/bindings/input/samsung-keypad.txt @@ -38,6 +38,7 @@ Required Board Specific Properties: Optional Properties: - wakeup-source: use any event on keypad as wakeup event. + (Legacy property supported: "linux,input-wakeup") Optional Properties specific to linux: - linux,keypad-no-autorepeat: do no enable autorepeat feature. @@ -51,7 +52,7 @@ Example: samsung,keypad-num-rows = <2>; samsung,keypad-num-columns = <8>; linux,input-no-autorepeat; - linux,input-wakeup; + wakeup-source; pinctrl-names = "default"; pinctrl-0 = <&keypad_rows &keypad_columns>; diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt index 76db96704a60..f99528da1b1d 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt @@ -5,6 +5,7 @@ There are 3 variants of the chip for various touch panel sizes FT5206GE1 2.8" .. 3.8" FT5306DE4 4.3" .. 7" FT5406EE8 7" .. 8.9" +FT5506EEG 7" .. 8.9" The software interface is identical for all those chips, so that currently there is no need for the driver to distinguish between the @@ -17,6 +18,7 @@ Required properties: - compatible: "edt,edt-ft5206" or: "edt,edt-ft5306" or: "edt,edt-ft5406" + or: "edt,edt-ft5506" - reg: I2C slave address of the chip (0x38) - interrupt-parent: a phandle pointing to the interrupt controller @@ -49,7 +51,7 @@ Example: pinctrl-names = "default"; pinctrl-0 = <&edt_ft5x06_pins>; interrupt-parent = <&gpio2>; - interrupts = <5 0>; - reset-gpios = <&gpio2 6 1>; - wake-gpios = <&gpio4 9 0>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; + wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>; }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/focaltech-ft6236.txt b/Documentation/devicetree/bindings/input/touchscreen/focaltech-ft6236.txt new file mode 100644 index 000000000000..777521da3da5 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/focaltech-ft6236.txt @@ -0,0 +1,35 @@ +* FocalTech FT6236 I2C touchscreen controller + +Required properties: + - compatible : "focaltech,ft6236" + - reg : I2C slave address of the chip (0x38) + - interrupt-parent : a phandle pointing to the interrupt controller + serving the interrupt for this chip + - interrupts : interrupt specification for the touch controller + interrupt + - reset-gpios : GPIO specification for the RSTN input + - touchscreen-size-x : horizontal resolution of touchscreen (in pixels) + - touchscreen-size-y : vertical resolution of touchscreen (in pixels) + +Optional properties: + - touchscreen-fuzz-x : horizontal noise value of the absolute input + device (in pixels) + - touchscreen-fuzz-y : vertical noise value of the absolute input + device (in pixels) + - touchscreen-inverted-x : X axis is inverted (boolean) + - touchscreen-inverted-y : Y axis is inverted (boolean) + - touchscreen-swapped-x-y: X and Y axis are swapped (boolean) + Swapping is done after inverting the axis + +Example: + + ft6x06@38 { + compatible = "focaltech,ft6236"; + reg = <0x38>; + interrupt-parent = <&gpio>; + interrupts = <23 2>; + touchscreen-size-x = <320>; + touchscreen-size-y = <480>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt b/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt index 09089a6d69ed..b80c04b0e5c0 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt @@ -1,14 +1,15 @@ -* Texas Instruments tsc2005 touchscreen controller +* Texas Instruments tsc2004 and tsc2005 touchscreen controllers Required properties: - - compatible : "ti,tsc2005" - - reg : SPI device address - - spi-max-frequency : Maximal SPI speed + - compatible : "ti,tsc2004" or "ti,tsc2005" + - reg : Device address - interrupts : IRQ specifier - - reset-gpios : GPIO specifier - - vio-supply : Regulator specifier + - spi-max-frequency : Maximum SPI clocking speed of the device + (for tsc2005) Optional properties: + - vio-supply : Regulator specifier + - reset-gpios : GPIO specifier for the controller reset line - ti,x-plate-ohms : integer, resistance of the touchscreen's X plates in ohm (defaults to 280) - ti,esd-recovery-timeout-ms : integer, if the touchscreen does not respond after @@ -18,6 +19,27 @@ Optional properties: Example: +&i2c3 { + tsc2004@48 { + compatible = "ti,tsc2004"; + reg = <0x48>; + vio-supply = <&vio>; + + reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; + interrupts-extended = <&gpio1 27 IRQ_TYPE_EDGE_RISING>; + + touchscreen-fuzz-x = <4>; + touchscreen-fuzz-y = <7>; + touchscreen-fuzz-pressure = <2>; + touchscreen-size-x = <4096>; + touchscreen-size-y = <4096>; + touchscreen-max-pressure = <2048>; + + ti,x-plate-ohms = <280>; + ti,esd-recovery-timeout-ms = <8000>; + }; +} + &mcspi1 { tsc2005@0 { compatible = "ti,tsc2005"; |