2 files changed, 36 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/iio/pressure/hp03.txt b/Documentation/devicetree/bindings/iio/pressure/hp03.txt
new file mode 100644
index 000000000000..54e7e70bcea5
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/hp03.txt
@@ -0,0 +1,17 @@
+HopeRF HP03 digital pressure/temperature sensors
+
+Required properties:
+- compatible: must be "hoperf,hp03"
+- xclr-gpio: must be device tree identifier of the XCLR pin.
+             The XCLR pin is a reset of the ADC in the chip,
+             it must be pulled HI before the conversion and
+             readout of the value from the ADC registers and
+             pulled LO afterward.
+
+Example:
+
+hp03@0x77 {
+	compatible = "hoperf,hp03";
+	reg = <0x77>;
+	xclr-gpio = <&portc 0 0x0>;
+};
diff --git a/Documentation/devicetree/bindings/iio/pressure/ms5611.txt b/Documentation/devicetree/bindings/iio/pressure/ms5611.txt
new file mode 100644
index 000000000000..17bca866c084
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/ms5611.txt
@@ -0,0 +1,19 @@
+MEAS ms5611 family pressure sensors
+
+Pressure sensors from MEAS Switzerland with SPI and I2C bus interfaces.
+
+Required properties:
+- compatible: "meas,ms5611" or "meas,ms5607"
+- reg: the I2C address or SPI chip select the device will respond to
+
+Optional properties:
+- vdd-supply: an optional regulator that needs to be on to provide VDD
+  power to the sensor.
+
+Example:
+
+ms5607@77 {
+	compatible = "meas,ms5607";
+	reg = <0x77>;
+	vdd-supply = <&ldo_3v3_gnss>;
+};