1 files changed, 0 insertions, 46 deletions
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt
deleted file mode 100644
index 4e36d6e2f7b6..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Qualcomm's SPMI PMIC current ADC
-
-QPNP PMIC current ADC (IADC) provides interface to clients to read current.
-A 16 bit ADC is used for current measurements. IADC can measure the current
-through an external resistor (channel 1) or internal (built-in) resistor
-(channel 0). When using an external resistor it is to be described by
-qcom,external-resistor-micro-ohms property.
-
-IADC node:
-
-- compatible:
-    Usage: required
-    Value type: <string>
-    Definition: Should contain "qcom,spmi-iadc".
-
-- reg:
-    Usage: required
-    Value type: <prop-encoded-array>
-    Definition: IADC base address and length in the SPMI PMIC register map
-
-- interrupts:
-    Usage: optional
-    Value type: <prop-encoded-array>
-    Definition: End of ADC conversion.
-
-- qcom,external-resistor-micro-ohms:
-    Usage: optional
-    Value type: <u32>
-    Definition: Sense resister value in micro Ohm.
-                If not defined value of 10000 micro Ohms will be used.
-
-Example:
-	/* IADC node */
-	pmic_iadc: iadc@3600 {
-		compatible = "qcom,spmi-iadc";
-		reg = <0x3600 0x100>;
-		interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
-		qcom,external-resistor-micro-ohms = <10000>;
-		#io-channel-cells  = <1>;
-	};
-
-	/* IIO client node */
-	bat {
-		io-channels = <&pmic_iadc  0>;
-		io-channel-names = "iadc";
-	};