1 files changed, 0 insertions, 44 deletions
diff --git a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
deleted file mode 100644
index 4c5c3712970e..000000000000
--- a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-NTC Thermistor hwmon sensors
--------------------------------
-
-Requires node properties:
-- "compatible" value : one of
-	"epcos,b57330v2103"
-	"epcos,b57891s0103"
-	"murata,ncp15wb473"
-	"murata,ncp18wb473"
-	"murata,ncp21wb473"
-	"murata,ncp03wb473"
-	"murata,ncp15wl333"
-	"murata,ncp03wf104"
-	"murata,ncp15xh103"
-
-/* Usage of vendor name "ntc" is deprecated */
-<DEPRECATED>	"ntc,ncp15wb473"
-<DEPRECATED>	"ntc,ncp18wb473"
-<DEPRECATED>	"ntc,ncp21wb473"
-<DEPRECATED>	"ntc,ncp03wb473"
-<DEPRECATED>	"ntc,ncp15wl333"
-
-- "pullup-uv"	Pull up voltage in micro volts
-- "pullup-ohm"	Pull up resistor value in ohms
-- "pulldown-ohm" Pull down resistor value in ohms
-- "connected-positive" Always ON, If not specified.
-		Status change is possible.
-- "io-channels"	Channel node of ADC to be used for
-		conversion.
-
-Optional node properties:
-- "#thermal-sensor-cells" Used to expose itself to thermal fw.
-
-Read more about iio bindings at
-	https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/
-
-Example:
-	ncp15wb473@0 {
-		compatible = "murata,ncp15wb473";
-		pullup-uv = <1800000>;
-		pullup-ohm = <47000>;
-		pulldown-ohm = <0>;
-		io-channels = <&adc 3>;
-	};