1 files changed, 73 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.yaml b/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.yaml
new file mode 100644
index 000000000000..bfcb1f364c3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/intel,ixp4xx-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx XScale Networking Processors GPIO Controller
+
+description: |
+  This GPIO controller is found in the Intel IXP4xx
+  processors. It supports 16 GPIO lines.
+  The interrupt portions of the GPIO controller is hierarchical.
+  The synchronous edge detector is part of the GPIO block, but the
+  actual enabling/disabling of the interrupt line is done in the
+  main IXP4xx interrupt controller which has a 1-to-1 mapping for
+  the first 12 GPIO lines to 12 system interrupts.
+  The remaining 4 GPIO lines can not be used for receiving
+  interrupts.
+  The interrupt parent of this GPIO controller must be the
+  IXP4xx interrupt controller.
+  GPIO 14 and 15 can be used as clock outputs rather than GPIO,
+  and this can be enabled by a special flag.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    const: intel,ixp4xx-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  intel,ixp4xx-gpio14-clkout:
+    description: If defined, enables clock output on GPIO 14
+      instead of GPIO.
+    type: boolean
+
+  intel,ixp4xx-gpio15-clkout:
+    description: If defined, enables clock output on GPIO 15
+      instead of GPIO.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    gpio@c8004000 {
+        compatible = "intel,ixp4xx-gpio";
+        reg = <0xc8004000 0x1000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };