1 files changed, 0 insertions, 63 deletions
diff --git a/Documentation/devicetree/bindings/gpio/gpio-vf610.txt b/Documentation/devicetree/bindings/gpio/gpio-vf610.txt
deleted file mode 100644
index ae254aadee35..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-vf610.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-* Freescale VF610 PORT/GPIO module
-
-The Freescale PORT/GPIO modules are two adjacent modules providing GPIO
-functionality. Each pair serves 32 GPIOs. The VF610 has 5 instances of
-each, and each PORT module has its own interrupt.
-
-Required properties for GPIO node:
-- compatible : Should be "fsl,<soc>-gpio", below is supported list:
-	       "fsl,vf610-gpio"
-	       "fsl,imx7ulp-gpio"
-- reg : The first reg tuple represents the PORT module, the second tuple
-  the GPIO module.
-- interrupts : Should be the port interrupt shared by all 32 pins.
-- gpio-controller : Marks the device node as a gpio controller.
-- #gpio-cells : Should be two. The first cell is the pin number and
-  the second cell is used to specify the gpio polarity:
-      0 = active high
-      1 = active low
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells : Should be 2.  The first cell is the GPIO number.
-  The second cell bits[3:0] is used to specify trigger type and level flags:
-      1 = low-to-high edge triggered.
-      2 = high-to-low edge triggered.
-      4 = active high level-sensitive.
-      8 = active low level-sensitive.
-
-Optional properties:
--clocks:	Must contain an entry for each entry in clock-names.
-		See common clock-bindings.txt for details.
--clock-names:	A list of clock names. For imx7ulp, it must contain
-		"gpio", "port".
-
-Note: Each GPIO port should have an alias correctly numbered in "aliases"
-node.
-
-Examples:
-
-aliases {
-	gpio0 = &gpio1;
-	gpio1 = &gpio2;
-};
-
-gpio1: gpio@40049000 {
-	compatible = "fsl,vf610-gpio";
-	reg = <0x40049000 0x1000 0x400ff000 0x40>;
-	interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	gpio-ranges = <&iomuxc 0 0 32>;
-};
-
-gpio2: gpio@4004a000 {
-	compatible = "fsl,vf610-gpio";
-	reg = <0x4004a000 0x1000 0x400ff040 0x40>;
-	interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	gpio-ranges = <&iomuxc 0 32 32>;
-};