1 files changed, 0 insertions, 74 deletions
diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt
deleted file mode 100644
index 3d32ce137e7f..000000000000
--- a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt
+++ /dev/null
@@ -1,74 +0,0 @@
-Rockchip DWC HDMI TX Encoder
-============================
-
-The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
-with a companion PHY IP.
-
-These DT bindings follow the Synopsys DWC HDMI TX bindings defined in
-Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the
-following device-specific properties.
-
-
-Required properties:
-
-- compatible: should be one of the following:
-		"rockchip,rk3228-dw-hdmi"
-		"rockchip,rk3288-dw-hdmi"
-		"rockchip,rk3328-dw-hdmi"
-		"rockchip,rk3399-dw-hdmi"
-- reg: See dw_hdmi.txt.
-- reg-io-width: See dw_hdmi.txt. Shall be 4.
-- interrupts: HDMI interrupt number
-- clocks: See dw_hdmi.txt.
-- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt.
-- ports: See dw_hdmi.txt. The DWC HDMI shall have a single port numbered 0
-  corresponding to the video input of the controller. The port shall have two
-  endpoints, numbered 0 and 1, connected respectively to the vopb and vopl.
-- rockchip,grf: Shall reference the GRF to mux vopl/vopb.
-
-Optional properties
-
-- ddc-i2c-bus: The HDMI DDC bus can be connected to either a system I2C master
-  or the functionally-reduced I2C master contained in the DWC HDMI. When
-  connected to a system I2C master this property contains a phandle to that
-  I2C master controller.
-- clock-names: See dw_hdmi.txt. The "cec" clock is optional.
-- clock-names: May contain "cec" as defined in dw_hdmi.txt.
-- clock-names: May contain "grf", power for grf io.
-- clock-names: May contain "vpll", external clock for some hdmi phy.
-- phys: from general PHY binding: the phandle for the PHY device.
-- phy-names: Should be "hdmi" if phys references an external phy.
-
-Optional pinctrl entry:
-- If you have both a "unwedge" and "default" pinctrl entry, dw_hdmi
-  will switch to the unwedge pinctrl state for 10ms if it ever gets an
-  i2c timeout.  It's intended that this unwedge pinctrl entry will
-  cause the SDA line to be driven low to work around a hardware
-  errata.
-
-Example:
-
-hdmi: hdmi@ff980000 {
-	compatible = "rockchip,rk3288-dw-hdmi";
-	reg = <0xff980000 0x20000>;
-	reg-io-width = <4>;
-	ddc-i2c-bus = <&i2c5>;
-	rockchip,grf = <&grf>;
-	interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
-	clock-names = "iahb", "isfr";
-	ports {
-		hdmi_in: port {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			hdmi_in_vopb: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&vopb_out_hdmi>;
-			};
-			hdmi_in_vopl: endpoint@1 {
-				reg = <1>;
-				remote-endpoint = <&vopl_out_hdmi>;
-			};
-		};
-	};
-};