diff options
Diffstat (limited to 'Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt')
-rw-r--r-- | Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt | 98 |
1 files changed, 0 insertions, 98 deletions
diff --git a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt deleted file mode 100644 index 43561584c13a..000000000000 --- a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt +++ /dev/null @@ -1,98 +0,0 @@ -Rockchip RK3288 specific extensions to the Analogix Display Port -================================ - -Required properties: -- compatible: "rockchip,rk3288-dp", - "rockchip,rk3399-edp"; - -- reg: physical base address of the controller and length - -- clocks: from common clock binding: handle to dp clock. - of memory mapped region. - -- clock-names: from common clock binding: - Required elements: "dp" "pclk" - -- resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. - -- pinctrl-names: Names corresponding to the chip hotplug pinctrl states. -- pinctrl-0: pin-control mode. should be <&edp_hpd> - -- reset-names: Must include the name "dp" - -- rockchip,grf: this soc should set GRF regs, so need get grf here. - -- ports: there are 2 port nodes with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. - Port 0: contained 2 endpoints, connecting to the output of vop. - Port 1: contained 1 endpoint, connecting to the input of panel. - -Optional property for different chips: -- clocks: from common clock binding: handle to grf_vio clock. - -- clock-names: from common clock binding: - Required elements: "grf" - -For the below properties, please refer to Analogix DP binding document: - * Documentation/devicetree/bindings/display/bridge/analogix_dp.txt -- phys (required) -- phy-names (required) -- hpd-gpios (optional) -- force-hpd (optional) -------------------------------------------------------------------------------- - -Example: - dp-controller: dp@ff970000 { - compatible = "rockchip,rk3288-dp"; - reg = <0xff970000 0x4000>; - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>; - clock-names = "dp", "pclk"; - phys = <&dp_phy>; - phy-names = "dp"; - - rockchip,grf = <&grf>; - resets = <&cru 111>; - reset-names = "dp"; - - pinctrl-names = "default"; - pinctrl-0 = <&edp_hpd>; - - - ports { - #address-cells = <1>; - #size-cells = <0>; - edp_in: port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - edp_in_vopb: endpoint@0 { - reg = <0>; - remote-endpoint = <&vopb_out_edp>; - }; - edp_in_vopl: endpoint@1 { - reg = <1>; - remote-endpoint = <&vopl_out_edp>; - }; - }; - - edp_out: port@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - edp_out_panel: endpoint { - reg = <0>; - remote-endpoint = <&panel_in_edp> - }; - }; - }; - }; - - pinctrl { - edp { - edp_hpd: edp-hpd { - rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_none>; - }; - }; - }; |