diff options
Diffstat (limited to 'Documentation/devicetree/bindings/display/panel')
15 files changed, 254 insertions, 22 deletions
diff --git a/Documentation/devicetree/bindings/display/panel/auo,g070vvn01.txt b/Documentation/devicetree/bindings/display/panel/auo,g070vvn01.txt new file mode 100644 index 000000000000..49e4105378f6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/auo,g070vvn01.txt @@ -0,0 +1,29 @@ +AU Optronics Corporation 7.0" FHD (800 x 480) TFT LCD panel + +Required properties: +- compatible: should be "auo,g070vvn01" +- backlight: phandle of the backlight device attached to the panel +- power-supply: single regulator to provide the supply voltage + +Required nodes: +- port: Parallel port mapping to connect this display + +This panel needs single power supply voltage. Its backlight is conntrolled +via PWM signal. + +Example: +-------- + +Example device-tree definition when connected to iMX6Q based board + + lcd_panel: lcd-panel { + compatible = "auo,g070vvn01"; + backlight = <&backlight_lcd>; + power-supply = <®_display>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt b/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt new file mode 100644 index 000000000000..55183d360032 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt @@ -0,0 +1,28 @@ +BOE HV070WSA-100 7.01" WSVGA TFT LCD panel + +Required properties: +- compatible: should be "boe,hv070wsa-100" +- power-supply: regulator to provide the VCC supply voltage (3.3 volts) +- enable-gpios: GPIO pin to enable and disable panel (active high) + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. + +The device node can contain one 'port' child node with one child +'endpoint' node, according to the bindings defined in [1]. This +node should describe panel's video bus. + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + + panel: panel { + compatible = "boe,hv070wsa-100"; + power-supply = <&vcc_3v3_reg>; + enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>; + port { + panel_ep: endpoint { + remote-endpoint = <&bridge_out_ep>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/dataimage,scf0700c48ggu18.txt b/Documentation/devicetree/bindings/display/panel/dataimage,scf0700c48ggu18.txt new file mode 100644 index 000000000000..897085ee3cd4 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/dataimage,scf0700c48ggu18.txt @@ -0,0 +1,8 @@ +DataImage, Inc. 7" WVGA (800x480) TFT LCD panel with 24-bit parallel interface. + +Required properties: +- compatible: should be "dataimage,scf0700c48ggu18" +- power-supply: as specified in the base binding + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/dlc,dlc0700yzg-1.txt b/Documentation/devicetree/bindings/display/panel/dlc,dlc0700yzg-1.txt new file mode 100644 index 000000000000..bf06bb025b08 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/dlc,dlc0700yzg-1.txt @@ -0,0 +1,13 @@ +DLC Display Co. DLC0700YZG-1 7.0" WSVGA TFT LCD panel + +Required properties: +- compatible: should be "dlc,dlc0700yzg-1" +- power-supply: See simple-panel.txt + +Optional properties: +- reset-gpios: See panel-common.txt +- enable-gpios: See simple-panel.txt +- backlight: See simple-panel.txt + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/edt,et-series.txt b/Documentation/devicetree/bindings/display/panel/edt,et-series.txt new file mode 100644 index 000000000000..f56b99ebd9be --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/edt,et-series.txt @@ -0,0 +1,39 @@ +Emerging Display Technology Corp. Displays +========================================== + + +Display bindings for EDT Display Technology Corp. Displays which are +compatible with the simple-panel binding, which is specified in +simple-panel.txt + + +5,7" WVGA TFT Panels +-------------------- + ++-----------------+---------------------+-------------------------------------+ +| Identifier | compatbile | description | ++=================+=====================+=====================================+ +| ET057090DHU | edt,et057090dhu | 5.7" VGA TFT LCD panel | ++-----------------+---------------------+-------------------------------------+ + + +7,0" WVGA TFT Panels +-------------------- + ++-----------------+---------------------+-------------------------------------+ +| Identifier | compatbile | description | ++=================+=====================+=====================================+ +| ETM0700G0DH6 | edt,etm070080dh6 | WVGA TFT Display with capacitive | +| | | Touchscreen | ++-----------------+---------------------+-------------------------------------+ +| ETM0700G0BDH6 | edt,etm070080bdh6 | Same as ETM0700G0DH6 but with | +| | | inverted pixel clock. | ++-----------------+---------------------+-------------------------------------+ +| ETM0700G0EDH6 | edt,etm070080edh6 | Same display as the ETM0700G0BDH6, | +| | | but with changed Hardware for the | +| | | backlight and the touch interface | ++-----------------+---------------------+-------------------------------------+ +| ET070080DH6 | edt,etm070080dh6 | Same timings as the ETM0700G0DH6, | +| | | but with resistive touch. | ++-----------------+---------------------+-------------------------------------+ + diff --git a/Documentation/devicetree/bindings/display/panel/edt,et070080dh6.txt b/Documentation/devicetree/bindings/display/panel/edt,et070080dh6.txt deleted file mode 100644 index 20cb38e836e4..000000000000 --- a/Documentation/devicetree/bindings/display/panel/edt,et070080dh6.txt +++ /dev/null @@ -1,10 +0,0 @@ -Emerging Display Technology Corp. ET070080DH6 7.0" WVGA TFT LCD panel - -Required properties: -- compatible: should be "edt,et070080dh6" - -This panel is the same as ETM0700G0DH6 except for the touchscreen. -ET070080DH6 is the model with resistive touch. - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/edt,etm0700g0dh6.txt b/Documentation/devicetree/bindings/display/panel/edt,etm0700g0dh6.txt deleted file mode 100644 index ee4b18053e40..000000000000 --- a/Documentation/devicetree/bindings/display/panel/edt,etm0700g0dh6.txt +++ /dev/null @@ -1,10 +0,0 @@ -Emerging Display Technology Corp. ETM0700G0DH6 7.0" WVGA TFT LCD panel - -Required properties: -- compatible: should be "edt,etm0700g0dh6" - -This panel is the same as ET070080DH6 except for the touchscreen. -ETM0700G0DH6 is the model with capacitive multitouch. - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt new file mode 100644 index 000000000000..4a041acb4e18 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt @@ -0,0 +1,20 @@ +Ilitek ILI9881c based MIPI-DSI panels + +Required properties: + - compatible: must be "ilitek,ili9881c" and one of: + * "bananapi,lhr050h41" + - reg: DSI virtual channel used by that screen + - power-supply: phandle to the power regulator + - reset-gpios: a GPIO phandle for the reset pin + +Optional properties: + - backlight: phandle to the backlight used + +Example: +panel@0 { + compatible = "bananapi,lhr050h41", "ilitek,ili9881c"; + reg = <0>; + power-supply = <®_display>; + reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */ + backlight = <&pwm_bl>; +}; diff --git a/Documentation/devicetree/bindings/display/panel/innolux,g070y2-l01.txt b/Documentation/devicetree/bindings/display/panel/innolux,g070y2-l01.txt new file mode 100644 index 000000000000..7c234cf68e11 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/innolux,g070y2-l01.txt @@ -0,0 +1,12 @@ +Innolux G070Y2-L01 7" WVGA (800x480) TFT LCD panel + +Required properties: +- compatible: should be "innolux,g070y2-l01" +- power-supply: as specified in the base binding + +Optional properties: +- backlight: as specified in the base binding +- enable-gpios: as specified in the base binding + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt new file mode 100644 index 000000000000..595d9dfeffd3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt @@ -0,0 +1,24 @@ +Innolux P097PFG 9.7" 1536x2048 TFT LCD panel + +Required properties: +- compatible: should be "innolux,p097pfg" +- reg: DSI virtual channel of the peripheral +- avdd-supply: phandle of the regulator that provides positive voltage +- avee-supply: phandle of the regulator that provides negative voltage +- enable-gpios: panel enable gpio + +Optional properties: +- backlight: phandle of the backlight device attached to the panel + +Example: + + &mipi_dsi { + panel { + compatible = "innolux,p079zca"; + reg = <0>; + avdd-supply = <...>; + avee-supply = <...>; + backlight = <&backlight>; + enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt b/Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt new file mode 100644 index 000000000000..a9b35265fa13 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt @@ -0,0 +1,20 @@ +Innolux TV123WAM 12.3 inch eDP 2K display panel + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. + +Required properties: +- compatible: should be "innolux,tv123wam" +- power-supply: regulator to provide the supply voltage + +Optional properties: +- enable-gpios: GPIO pin to enable or disable the panel +- backlight: phandle of the backlight device attached to the panel + +Example: + panel_edp: panel-edp { + compatible = "innolux,tv123wam"; + enable-gpios = <&msmgpio 31 GPIO_ACTIVE_LOW>; + power-supply = <&pm8916_l2>; + backlight = <&backlight>; + }; diff --git a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd097d04.txt b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd097d04.txt new file mode 100644 index 000000000000..164a5fa236da --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd097d04.txt @@ -0,0 +1,22 @@ +Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel + +Required properties: +- compatible: should be "kingdisplay,kd097d04" +- reg: DSI virtual channel of the peripheral +- power-supply: phandle of the regulator that provides the supply voltage +- enable-gpios: panel enable gpio + +Optional properties: +- backlight: phandle of the backlight device attached to the panel + +Example: + + &mipi_dsi { + panel { + compatible = "kingdisplay,kd097d04"; + reg = <0>; + power-supply = <...>; + backlight = <&backlight>; + enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/edt,et057090dhu.txt b/Documentation/devicetree/bindings/display/panel/newhaven,nhd-4.3-480272ef-atxl.txt index 4903d7b1d947..e78292b1a131 100644 --- a/Documentation/devicetree/bindings/display/panel/edt,et057090dhu.txt +++ b/Documentation/devicetree/bindings/display/panel/newhaven,nhd-4.3-480272ef-atxl.txt @@ -1,7 +1,7 @@ -Emerging Display Technology Corp. 5.7" VGA TFT LCD panel +Newhaven Display International 480 x 272 TFT LCD panel Required properties: -- compatible: should be "edt,et057090dhu" +- compatible: should be "newhaven,nhd-4.3-480272ef-atxl" This binding is compatible with the simple-panel binding, which is specified in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,rk070er9427.txt b/Documentation/devicetree/bindings/display/panel/rocktech,rk070er9427.txt new file mode 100644 index 000000000000..eb1fb9f8d1f4 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/rocktech,rk070er9427.txt @@ -0,0 +1,25 @@ +Rocktech Display Ltd. RK070ER9427 800(RGB)x480 TFT LCD panel + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. + +Required properties: +- compatible: should be "rocktech,rk070er9427" + +Optional properties: +- backlight: phandle of the backlight device attached to the panel + +Optional nodes: +- Video port for LCD panel input. + +Example: + panel { + compatible = "rocktech,rk070er9427"; + backlight = <&backlight_lcd>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq035q7db03.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq035q7db03.txt new file mode 100644 index 000000000000..0753f6967279 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sharp,lq035q7db03.txt @@ -0,0 +1,12 @@ +Sharp LQ035Q7DB03 3.5" QVGA TFT LCD panel + +Required properties: +- compatible: should be "sharp,lq035q7db03" +- power-supply: phandle of the regulator that provides the supply voltage + +Optional properties: +- enable-gpios: GPIO pin to enable or disable the panel +- backlight: phandle of the backlight device attached to the panel + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. |