1 files changed, 60 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/display/msm/edp.txt b/Documentation/devicetree/bindings/display/msm/edp.txt
new file mode 100644
index 000000000000..3a20f6ea5898
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/edp.txt
@@ -0,0 +1,60 @@
+Qualcomm Technologies Inc. adreno/snapdragon eDP output
+
+Required properties:
+- compatible:
+  * "qcom,mdss-edp"
+- reg: Physical base address and length of the registers of controller and PLL
+- reg-names: The names of register regions. The following regions are required:
+  * "edp"
+  * "pll_base"
+- interrupts: The interrupt signal from the eDP block.
+- power-domains: Should be <&mmcc MDSS_GDSC>.
+- clocks: device clocks
+  See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+- clock-names: the following clocks are required:
+  * "core_clk"
+  * "iface_clk"
+  * "mdp_core_clk"
+  * "pixel_clk"
+  * "link_clk"
+- #clock-cells: The value should be 1.
+- vdda-supply: phandle to vdda regulator device node
+- lvl-vdd-supply: phandle to regulator device node which is used to supply power
+  to HPD receiving chip
+- panel-en-gpios: GPIO pin to supply power to panel.
+- panel-hpd-gpios: GPIO pin used for eDP hpd.
+
+
+Optional properties:
+- interrupt-parent: phandle to the MDP block if the interrupt signal is routed
+  through MDP block
+
+Example:
+	mdss_edp: qcom,mdss_edp@fd923400 {
+			compatible = "qcom,mdss-edp";
+			reg-names =
+				"edp",
+				"pll_base";
+			reg =	<0xfd923400 0x700>,
+				<0xfd923a00 0xd4>;
+			interrupt-parent = <&mdss_mdp>;
+			interrupts = <12 0>;
+			power-domains = <&mmcc MDSS_GDSC>;
+			clock-names =
+				"core_clk",
+				"pixel_clk",
+				"iface_clk",
+				"link_clk",
+				"mdp_core_clk";
+			clocks =
+				<&mmcc MDSS_EDPAUX_CLK>,
+				<&mmcc MDSS_EDPPIXEL_CLK>,
+				<&mmcc MDSS_AHB_CLK>,
+				<&mmcc MDSS_EDPLINK_CLK>,
+				<&mmcc MDSS_MDP_CLK>;
+			#clock-cells = <1>;
+			vdda-supply = <&pma8084_l12>;
+			lvl-vdd-supply = <&lvl_vreg>;
+			panel-en-gpios = <&tlmm 137 0>;
+			panel-hpd-gpios = <&tlmm 103 0>;
+	};