diff options
Diffstat (limited to 'Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt | 132 |
1 files changed, 132 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt new file mode 100644 index 000000000000..da8d9bb5751c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt @@ -0,0 +1,132 @@ +Broadcom iProc Family Clocks + +This binding uses the common clock binding: + Documentation/devicetree/bindings/clock/clock-bindings.txt + +The iProc clock controller manages clocks that are common to the iProc family. +An SoC from the iProc family may have several PPLs, e.g., ARMPLL, GENPLL, +LCPLL0, MIPIPLL, and etc., all derived from an onboard crystal. Each PLL +comprises of several leaf clocks + +Required properties for a PLL and its leaf clocks: + +- compatible: + Should have a value of the form "brcm,<soc>-<pll>". For example, GENPLL on +Cygnus has a compatible string of "brcm,cygnus-genpll" + +- #clock-cells: + Have a value of <1> since there are more than 1 leaf clock of a given PLL + +- reg: + Define the base and range of the I/O address space that contain the iProc +clock control registers required for the PLL + +- clocks: + The input parent clock phandle for the PLL. For most iProc PLLs, this is an +onboard crystal with a fixed rate + +- clock-output-names: + An ordered list of strings defining the names of the clocks + +Example: + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + genpll: genpll { + #clock-cells = <1>; + compatible = "brcm,cygnus-genpll"; + reg = <0x0301d000 0x2c>, <0x0301c020 0x4>; + clocks = <&osc>; + clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys", + "enet_sw", "audio_125", "can"; + }; + +Required properties for ASIU clocks: + +ASIU clocks are a special case. These clocks are derived directly from the +reference clock of the onboard crystal + +- compatible: + Should have a value of the form "brcm,<soc>-asiu-clk". For example, ASIU +clocks for Cygnus have a compatible string of "brcm,cygnus-asiu-clk" + +- #clock-cells: + Have a value of <1> since there are more than 1 ASIU clocks + +- reg: + Define the base and range of the I/O address space that contain the iProc +clock control registers required for ASIU clocks + +- clocks: + The input parent clock phandle for the ASIU clock, i.e., the onboard +crystal + +- clock-output-names: + An ordered list of strings defining the names of the ASIU clocks + +Example: + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + asiu_clks: asiu_clks { + #clock-cells = <1>; + compatible = "brcm,cygnus-asiu-clk"; + reg = <0x0301d048 0xc>, <0x180aa024 0x4>; + clocks = <&osc>; + clock-output-names = "keypad", "adc/touch", "pwm"; + }; + +Cygnus +------ +PLL and leaf clock compatible strings for Cygnus are: + "brcm,cygnus-armpll" + "brcm,cygnus-genpll" + "brcm,cygnus-lcpll0" + "brcm,cygnus-mipipll" + "brcm,cygnus-asiu-clk" + +The following table defines the set of PLL/clock index and ID for Cygnus. +These clock IDs are defined in: + "include/dt-bindings/clock/bcm-cygnus.h" + + Clock Source (Parent) Index ID + --- ----- ----- --------- + crystal N/A N/A N/A + + armpll crystal N/A N/A + + keypad crystal (ASIU) 0 BCM_CYGNUS_ASIU_KEYPAD_CLK + adc/tsc crystal (ASIU) 1 BCM_CYGNUS_ASIU_ADC_CLK + pwm crystal (ASIU) 2 BCM_CYGNUS_ASIU_PWM_CLK + + genpll crystal 0 BCM_CYGNUS_GENPLL + axi21 genpll 1 BCM_CYGNUS_GENPLL_AXI21_CLK + 250mhz genpll 2 BCM_CYGNUS_GENPLL_250MHZ_CLK + ihost_sys genpll 3 BCM_CYGNUS_GENPLL_IHOST_SYS_CLK + enet_sw genpll 4 BCM_CYGNUS_GENPLL_ENET_SW_CLK + audio_125 genpll 5 BCM_CYGNUS_GENPLL_AUDIO_125_CLK + can genpll 6 BCM_CYGNUS_GENPLL_CAN_CLK + + lcpll0 crystal 0 BCM_CYGNUS_LCPLL0 + pcie_phy lcpll0 1 BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK + ddr_phy lcpll0 2 BCM_CYGNUS_LCPLL0_DDR_PHY_CLK + sdio lcpll0 3 BCM_CYGNUS_LCPLL0_SDIO_CLK + usb_phy lcpll0 4 BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK + smart_card lcpll0 5 BCM_CYGNUS_LCPLL0_SMART_CARD_CLK + ch5_unused lcpll0 6 BCM_CYGNUS_LCPLL0_CH5_UNUSED + + mipipll crystal 0 BCM_CYGNUS_MIPIPLL + ch0_unused mipipll 1 BCM_CYGNUS_MIPIPLL_CH0_UNUSED + ch1_lcd mipipll 2 BCM_CYGNUS_MIPIPLL_CH1_LCD + ch2_v3d mipipll 3 BCM_CYGNUS_MIPIPLL_CH2_V3D + ch3_unused mipipll 4 BCM_CYGNUS_MIPIPLL_CH3_UNUSED + ch4_unused mipipll 5 BCM_CYGNUS_MIPIPLL_CH4_UNUSED + ch5_unused mipipll 6 BCM_CYGNUS_MIPIPLL_CH5_UNUSED |