3 files changed, 19 insertions, 16 deletions
diff --git a/Documentation/devicetree/bindings/ata/ahci-da850.txt b/Documentation/devicetree/bindings/ata/ahci-da850.txt
new file mode 100644
index 000000000000..5f8193417725
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ahci-da850.txt
@@ -0,0 +1,18 @@
+Device tree binding for the TI DA850 AHCI SATA Controller
+---------------------------------------------------------
+
+Required properties:
+  - compatible: must be "ti,da850-ahci"
+  - reg: physical base addresses and sizes of the two register regions
+         used by the controller: the register map as defined by the
+         AHCI 1.1 standard and the Power Down Control Register (PWRDN)
+         for enabling/disabling the SATA clock receiver
+  - interrupts: interrupt specifier (refer to the interrupt binding)
+
+Example:
+
+	sata: sata@218000 {
+		compatible = "ti,da850-ahci";
+		reg = <0x218000 0x2000>, <0x22c018 0x4>;
+		interrupts = <67>;
+	};
diff --git a/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt b/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt
index 032a7606b862..fc33ca01e9ba 100644
--- a/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt
@@ -3,7 +3,7 @@ Binding for Freescale QorIQ AHCI SATA Controller
 Required properties:
   - reg: Physical base address and size of the controller's register area.
   - compatible: Compatibility string. Must be 'fsl,<chip>-ahci', where
-    chip could be ls1021a, ls2080a, ls1043a etc.
+    chip could be ls1021a, ls1043a, ls1046a, ls2080a etc.
   - clocks: Input clock specifier. Refer to common clock bindings.
   - interrupts: Interrupt specifier. Refer to interrupt binding.
 
diff --git a/Documentation/devicetree/bindings/ata/ahci-st.txt b/Documentation/devicetree/bindings/ata/ahci-st.txt
index e1d01df8e3c1..909c9935360d 100644
--- a/Documentation/devicetree/bindings/ata/ahci-st.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-st.txt
@@ -18,21 +18,6 @@ Optional properties:
 
 Example:
 
-	/* Example for stih416 */
-	sata0: sata@fe380000 {
-		compatible	= "st,ahci";
-		reg		= <0xfe380000 0x1000>;
-		interrupts	= <GIC_SPI 157 IRQ_TYPE_NONE>;
-		interrupt-names	= "hostc";
-		phys		= <&phy_port0 PHY_TYPE_SATA>;
-		phy-names	= "ahci_phy";
-		resets		= <&powerdown STIH416_SATA0_POWERDOWN>,
-				  <&softreset STIH416_SATA0_SOFTRESET>;
-		reset-names	= "pwr-dwn", "sw-rst";
-		clocks		= <&clk_s_a0_ls CLK_ICN_REG>;
-		clock-names	= "ahci_clk";
-	};
-
 	/* Example for stih407 family silicon */
 	sata0: sata@9b20000 {
 		compatible	= "st,ahci";