diff options
Diffstat (limited to 'Documentation/admin-guide/mm')
| -rw-r--r-- | Documentation/admin-guide/mm/cma_debugfs.rst | 10 | ||||
| -rw-r--r-- | Documentation/admin-guide/mm/damon/index.rst | 11 | ||||
| -rw-r--r-- | Documentation/admin-guide/mm/damon/usage.rst | 99 | ||||
| -rw-r--r-- | Documentation/admin-guide/mm/hugetlbpage.rst | 10 | ||||
| -rw-r--r-- | Documentation/admin-guide/mm/index.rst | 1 | ||||
| -rw-r--r-- | Documentation/admin-guide/mm/kho.rst | 115 | ||||
| -rw-r--r-- | Documentation/admin-guide/mm/multigen_lru.rst | 5 | ||||
| -rw-r--r-- | Documentation/admin-guide/mm/pagemap.rst | 22 | ||||
| -rw-r--r-- | Documentation/admin-guide/mm/zswap.rst | 10 |
9 files changed, 234 insertions, 49 deletions
diff --git a/Documentation/admin-guide/mm/cma_debugfs.rst b/Documentation/admin-guide/mm/cma_debugfs.rst index 7367e6294ef6..4120e9cb0cd5 100644 --- a/Documentation/admin-guide/mm/cma_debugfs.rst +++ b/Documentation/admin-guide/mm/cma_debugfs.rst @@ -12,10 +12,16 @@ its CMA name like below: The structure of the files created under that directory is as follows: - - [RO] base_pfn: The base PFN (Page Frame Number) of the zone. + - [RO] base_pfn: The base PFN (Page Frame Number) of the CMA area. + This is the same as ranges/0/base_pfn. - [RO] count: Amount of memory in the CMA area. - [RO] order_per_bit: Order of pages represented by one bit. - - [RO] bitmap: The bitmap of page states in the zone. + - [RO] bitmap: The bitmap of allocated pages in the area. + This is the same as ranges/0/base_pfn. + - [RO] ranges/N/base_pfn: The base PFN of contiguous range N + in the CMA area. + - [RO] ranges/N/bitmap: The bit map of allocated pages in + range N in the CMA area. - [WO] alloc: Allocate N pages from that CMA area. For example:: echo 5 > <debugfs>/cma/<cma_name>/alloc diff --git a/Documentation/admin-guide/mm/damon/index.rst b/Documentation/admin-guide/mm/damon/index.rst index 33d37bb2fb4e..bc7e976120e0 100644 --- a/Documentation/admin-guide/mm/damon/index.rst +++ b/Documentation/admin-guide/mm/damon/index.rst @@ -1,12 +1,11 @@ .. SPDX-License-Identifier: GPL-2.0 -========================== -DAMON: Data Access MONitor -========================== +================================================================ +DAMON: Data Access MONitoring and Access-aware System Operations +================================================================ -:doc:`DAMON </mm/damon/index>` allows light-weight data access monitoring. -Using DAMON, users can analyze the memory access patterns of their systems and -optimize those. +:doc:`DAMON </mm/damon/index>` is a Linux kernel subsystem for efficient data +access monitoring and access-aware system operations. .. toctree:: :maxdepth: 2 diff --git a/Documentation/admin-guide/mm/damon/usage.rst b/Documentation/admin-guide/mm/damon/usage.rst index 47a44bd348ab..d960aba72b82 100644 --- a/Documentation/admin-guide/mm/damon/usage.rst +++ b/Documentation/admin-guide/mm/damon/usage.rst @@ -64,6 +64,7 @@ comma (","). │ │ │ │ :ref:`0 <sysfs_context>`/avail_operations,operations │ │ │ │ │ :ref:`monitoring_attrs <sysfs_monitoring_attrs>`/ │ │ │ │ │ │ intervals/sample_us,aggr_us,update_us + │ │ │ │ │ │ │ intervals_goal/access_bp,aggrs,min_sample_us,max_sample_us │ │ │ │ │ │ nr_regions/min,max │ │ │ │ │ :ref:`targets <sysfs_targets>`/nr_targets │ │ │ │ │ │ :ref:`0 <sysfs_target>`/pid_target @@ -80,10 +81,10 @@ comma (","). │ │ │ │ │ │ │ :ref:`quotas <sysfs_quotas>`/ms,bytes,reset_interval_ms,effective_bytes │ │ │ │ │ │ │ │ weights/sz_permil,nr_accesses_permil,age_permil │ │ │ │ │ │ │ │ :ref:`goals <sysfs_schemes_quota_goals>`/nr_goals - │ │ │ │ │ │ │ │ │ 0/target_metric,target_value,current_value + │ │ │ │ │ │ │ │ │ 0/target_metric,target_value,current_value,nid │ │ │ │ │ │ │ :ref:`watermarks <sysfs_watermarks>`/metric,interval_us,high,mid,low - │ │ │ │ │ │ │ :ref:`filters <sysfs_filters>`/nr_filters - │ │ │ │ │ │ │ │ 0/type,matching,allow,memcg_path,addr_start,addr_end,target_idx + │ │ │ │ │ │ │ :ref:`{core_,ops_,}filters <sysfs_filters>`/nr_filters + │ │ │ │ │ │ │ │ 0/type,matching,allow,memcg_path,addr_start,addr_end,target_idx,min,max │ │ │ │ │ │ │ :ref:`stats <sysfs_schemes_stats>`/nr_tried,sz_tried,nr_applied,sz_applied,sz_ops_filter_passed,qt_exceeds │ │ │ │ │ │ │ :ref:`tried_regions <sysfs_schemes_tried_regions>`/total_bytes │ │ │ │ │ │ │ │ 0/start,end,nr_accesses,age,sz_filter_passed @@ -132,6 +133,11 @@ Users can write below commands for the kdamond to the ``state`` file. - ``off``: Stop running. - ``commit``: Read the user inputs in the sysfs files except ``state`` file again. +- ``update_tuned_intervals``: Update the contents of ``sample_us`` and + ``aggr_us`` files of the kdamond with the auto-tuning applied ``sampling + interval`` and ``aggregation interval`` for the files. Please refer to + :ref:`intervals_goal section <damon_usage_sysfs_monitoring_intervals_goal>` + for more details. - ``commit_schemes_quota_goals``: Read the DAMON-based operation schemes' :ref:`quota goals <sysfs_schemes_quota_goals>`. - ``update_schemes_stats``: Update the contents of stats files for each @@ -213,6 +219,25 @@ writing to and rading from the files. For more details about the intervals and monitoring regions range, please refer to the Design document (:doc:`/mm/damon/design`). +.. _damon_usage_sysfs_monitoring_intervals_goal: + +contexts/<N>/monitoring_attrs/intervals/intervals_goal/ +------------------------------------------------------- + +Under the ``intervals`` directory, one directory for automated tuning of +``sample_us`` and ``aggr_us``, namely ``intervals_goal`` directory also exists. +Under the directory, four files for the auto-tuning control, namely +``access_bp``, ``aggrs``, ``min_sample_us`` and ``max_sample_us`` exist. +Please refer to the :ref:`design document of the feature +<damon_design_monitoring_intervals_autotuning>` for the internal of the tuning +mechanism. Reading and writing the four files under ``intervals_goal`` +directory shows and updates the tuning parameters that described in the +:ref:design doc <damon_design_monitoring_intervals_autotuning>` with the same +names. The tuning starts with the user-set ``sample_us`` and ``aggr_us``. The +tuning-applied current values of the two intervals can be read from the +``sample_us`` and ``aggr_us`` files after writing ``update_tuned_intervals`` to +the ``state`` file. + .. _sysfs_targets: contexts/<N>/targets/ @@ -282,9 +307,10 @@ to ``N-1``. Each directory represents each DAMON-based operation scheme. schemes/<N>/ ------------ -In each scheme directory, five directories (``access_pattern``, ``quotas``, -``watermarks``, ``filters``, ``stats``, and ``tried_regions``) and three files -(``action``, ``target_nid`` and ``apply_interval``) exist. +In each scheme directory, seven directories (``access_pattern``, ``quotas``, +``watermarks``, ``core_filters``, ``ops_filters``, ``filters``, ``stats``, and +``tried_regions``) and three files (``action``, ``target_nid`` and +``apply_interval``) exist. The ``action`` file is for setting and getting the scheme's :ref:`action <damon_design_damos_action>`. The keywords that can be written to and read @@ -364,11 +390,11 @@ number (``N``) to the file creates the number of child directories named ``0`` to ``N-1``. Each directory represents each goal and current achievement. Among the multiple feedback, the best one is used. -Each goal directory contains three files, namely ``target_metric``, -``target_value`` and ``current_value``. Users can set and get the three -parameters for the quota auto-tuning goals that specified on the :ref:`design -doc <damon_design_damos_quotas_auto_tuning>` by writing to and reading from each -of the files. Note that users should further write +Each goal directory contains four files, namely ``target_metric``, +``target_value``, ``current_value`` and ``nid``. Users can set and get the +four parameters for the quota auto-tuning goals that specified on the +:ref:`design doc <damon_design_damos_quotas_auto_tuning>` by writing to and +reading from each of the files. Note that users should further write ``commit_schemes_quota_goals`` to the ``state`` file of the :ref:`kdamond directory <sysfs_kdamond>` to pass the feedback to DAMON. @@ -395,33 +421,43 @@ The ``interval`` should written in microseconds unit. .. _sysfs_filters: -schemes/<N>/filters/ --------------------- +schemes/<N>/{core\_,ops\_,}filters/ +----------------------------------- -The directory for the :ref:`filters <damon_design_damos_filters>` of the given +Directories for :ref:`filters <damon_design_damos_filters>` of the given DAMON-based operation scheme. -In the beginning, this directory has only one file, ``nr_filters``. Writing a +``core_filters`` and ``ops_filters`` directories are for the filters handled by +the DAMON core layer and operations set layer, respectively. ``filters`` +directory can be used for installing filters regardless of their handled +layers. Filters that requested by ``core_filters`` and ``ops_filters`` will be +installed before those of ``filters``. All three directories have same files. + +Use of ``filters`` directory can make expecting evaluation orders of given +filters with the files under directory bit confusing. Users are hence +recommended to use ``core_filters`` and ``ops_filters`` directories. The +``filters`` directory could be deprecated in future. + +In the beginning, the directory has only one file, ``nr_filters``. Writing a number (``N``) to the file creates the number of child directories named ``0`` to ``N-1``. Each directory represents each filter. The filters are evaluated in the numeric order. -Each filter directory contains seven files, namely ``type``, ``matching``, -``allow``, ``memcg_path``, ``addr_start``, ``addr_end``, and ``target_idx``. -To ``type`` file, you can write one of five special keywords: ``anon`` for -anonymous pages, ``memcg`` for specific memory cgroup, ``young`` for young -pages, ``addr`` for specific address range (an open-ended interval), or -``target`` for specific DAMON monitoring target filtering. Meaning of the -types are same to the description on the :ref:`design doc -<damon_design_damos_filters>`. - -In case of the memory cgroup filtering, you can specify the memory cgroup of -the interest by writing the path of the memory cgroup from the cgroups mount -point to ``memcg_path`` file. In case of the address range filtering, you can -specify the start and end address of the range to ``addr_start`` and -``addr_end`` files, respectively. For the DAMON monitoring target filtering, -you can specify the index of the target between the list of the DAMON context's -monitoring targets list to ``target_idx`` file. +Each filter directory contains nine files, namely ``type``, ``matching``, +``allow``, ``memcg_path``, ``addr_start``, ``addr_end``, ``min``, ``max`` +and ``target_idx``. To ``type`` file, you can write the type of the filter. +Refer to :ref:`the design doc <damon_design_damos_filters>` for available type +names, their meaning and on what layer those are handled. + +For ``memcg`` type, you can specify the memory cgroup of the interest by +writing the path of the memory cgroup from the cgroups mount point to +``memcg_path`` file. For ``addr`` type, you can specify the start and end +address of the range (open-ended interval) to ``addr_start`` and ``addr_end`` +files, respectively. For ``hugepage_size`` type, you can specify the minimum +and maximum size of the range (closed interval) to ``min`` and ``max`` files, +respectively. For ``target`` type, you can specify the index of the target +between the list of the DAMON context's monitoring targets list to +``target_idx`` file. You can write ``Y`` or ``N`` to ``matching`` file to specify whether the filter is for memory that matches the ``type``. You can write ``Y`` or ``N`` to @@ -431,6 +467,7 @@ the ``type`` and ``matching`` should be allowed or not. For example, below restricts a DAMOS action to be applied to only non-anonymous pages of all memory cgroups except ``/having_care_already``.:: + # cd ops_filters/0/ # echo 2 > nr_filters # # disallow anonymous pages echo anon > 0/type diff --git a/Documentation/admin-guide/mm/hugetlbpage.rst b/Documentation/admin-guide/mm/hugetlbpage.rst index f34a0d798d5b..67a941903fd2 100644 --- a/Documentation/admin-guide/mm/hugetlbpage.rst +++ b/Documentation/admin-guide/mm/hugetlbpage.rst @@ -145,7 +145,17 @@ hugepages It will allocate 1 2M hugepage on node0 and 2 2M hugepages on node1. If the node number is invalid, the parameter will be ignored. +hugepage_alloc_threads + Specify the number of threads that should be used to allocate hugepages + during boot. This parameter can be used to improve system bootup time + when allocating a large amount of huge pages. + The default value is 25% of the available hardware threads. + Example to use 8 allocation threads:: + + hugepage_alloc_threads=8 + + Note that this parameter only applies to non-gigantic huge pages. default_hugepagesz Specify the default huge page size. This parameter can only be specified once on the command line. default_hugepagesz can diff --git a/Documentation/admin-guide/mm/index.rst b/Documentation/admin-guide/mm/index.rst index 8b35795b664b..2d2f6c222308 100644 --- a/Documentation/admin-guide/mm/index.rst +++ b/Documentation/admin-guide/mm/index.rst @@ -42,3 +42,4 @@ the Linux memory management. transhuge userfaultfd zswap + kho diff --git a/Documentation/admin-guide/mm/kho.rst b/Documentation/admin-guide/mm/kho.rst new file mode 100644 index 000000000000..6dc18ed4b886 --- /dev/null +++ b/Documentation/admin-guide/mm/kho.rst @@ -0,0 +1,115 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +==================== +Kexec Handover Usage +==================== + +Kexec HandOver (KHO) is a mechanism that allows Linux to preserve memory +regions, which could contain serialized system states, across kexec. + +This document expects that you are familiar with the base KHO +:ref:`concepts <kho-concepts>`. If you have not read +them yet, please do so now. + +Prerequisites +============= + +KHO is available when the kernel is compiled with ``CONFIG_KEXEC_HANDOVER`` +set to y. Every KHO producer may have its own config option that you +need to enable if you would like to preserve their respective state across +kexec. + +To use KHO, please boot the kernel with the ``kho=on`` command line +parameter. You may use ``kho_scratch`` parameter to define size of the +scratch regions. For example ``kho_scratch=16M,512M,256M`` will reserve a +16 MiB low memory scratch area, a 512 MiB global scratch region, and 256 MiB +per NUMA node scratch regions on boot. + +Perform a KHO kexec +=================== + +First, before you perform a KHO kexec, you need to move the system into +the :ref:`KHO finalization phase <kho-finalization-phase>` :: + + $ echo 1 > /sys/kernel/debug/kho/out/finalize + +After this command, the KHO FDT is available in +``/sys/kernel/debug/kho/out/fdt``. Other subsystems may also register +their own preserved sub FDTs under +``/sys/kernel/debug/kho/out/sub_fdts/``. + +Next, load the target payload and kexec into it. It is important that you +use the ``-s`` parameter to use the in-kernel kexec file loader, as user +space kexec tooling currently has no support for KHO with the user space +based file loader :: + + # kexec -l /path/to/bzImage --initrd /path/to/initrd -s + # kexec -e + +The new kernel will boot up and contain some of the previous kernel's state. + +For example, if you used ``reserve_mem`` command line parameter to create +an early memory reservation, the new kernel will have that memory at the +same physical address as the old kernel. + +Abort a KHO exec +================ + +You can move the system out of KHO finalization phase again by calling :: + + $ echo 0 > /sys/kernel/debug/kho/out/active + +After this command, the KHO FDT is no longer available in +``/sys/kernel/debug/kho/out/fdt``. + +debugfs Interfaces +================== + +Currently KHO creates the following debugfs interfaces. Notice that these +interfaces may change in the future. They will be moved to sysfs once KHO is +stabilized. + +``/sys/kernel/debug/kho/out/finalize`` + Kexec HandOver (KHO) allows Linux to transition the state of + compatible drivers into the next kexec'ed kernel. To do so, + device drivers will instruct KHO to preserve memory regions, + which could contain serialized kernel state. + While the state is serialized, they are unable to perform + any modifications to state that was serialized, such as + handed over memory allocations. + + When this file contains "1", the system is in the transition + state. When contains "0", it is not. To switch between the + two states, echo the respective number into this file. + +``/sys/kernel/debug/kho/out/fdt`` + When KHO state tree is finalized, the kernel exposes the + flattened device tree blob that carries its current KHO + state in this file. Kexec user space tooling can use this + as input file for the KHO payload image. + +``/sys/kernel/debug/kho/out/scratch_len`` + Lengths of KHO scratch regions, which are physically contiguous + memory regions that will always stay available for future kexec + allocations. Kexec user space tools can use this file to determine + where it should place its payload images. + +``/sys/kernel/debug/kho/out/scratch_phys`` + Physical locations of KHO scratch regions. Kexec user space tools + can use this file in conjunction to scratch_phys to determine where + it should place its payload images. + +``/sys/kernel/debug/kho/out/sub_fdts/`` + In the KHO finalization phase, KHO producers register their own + FDT blob under this directory. + +``/sys/kernel/debug/kho/in/fdt`` + When the kernel was booted with Kexec HandOver (KHO), + the state tree that carries metadata about the previous + kernel's state is in this file in the format of flattened + device tree. This file may disappear when all consumers of + it finished to interpret their metadata. + +``/sys/kernel/debug/kho/in/sub_fdts/`` + Similar to ``kho/out/sub_fdts/``, but contains sub FDT blobs + of KHO producers passed from the old kernel. diff --git a/Documentation/admin-guide/mm/multigen_lru.rst b/Documentation/admin-guide/mm/multigen_lru.rst index 33e068830497..9cb54b4ff5d9 100644 --- a/Documentation/admin-guide/mm/multigen_lru.rst +++ b/Documentation/admin-guide/mm/multigen_lru.rst @@ -151,8 +151,9 @@ generations less than or equal to ``min_gen_nr``. ``min_gen_nr`` should be less than ``max_gen_nr-1``, since ``max_gen_nr`` and ``max_gen_nr-1`` are not fully aged (equivalent to the active list) and therefore cannot be evicted. ``swappiness`` -overrides the default value in ``/proc/sys/vm/swappiness``. -``nr_to_reclaim`` limits the number of pages to evict. +overrides the default value in ``/proc/sys/vm/swappiness`` and the valid +range is [0-200, max], with max being exclusively used for the reclamation +of anonymous memory. ``nr_to_reclaim`` limits the number of pages to evict. A typical use case is that a job scheduler runs this command before it tries to land a new job on a server. If it fails to materialize enough diff --git a/Documentation/admin-guide/mm/pagemap.rst b/Documentation/admin-guide/mm/pagemap.rst index caba0f52dd36..e60e9211fd9b 100644 --- a/Documentation/admin-guide/mm/pagemap.rst +++ b/Documentation/admin-guide/mm/pagemap.rst @@ -21,7 +21,8 @@ There are four components to pagemap: * Bit 56 page exclusively mapped (since 4.2) * Bit 57 pte is uffd-wp write-protected (since 5.13) (see Documentation/admin-guide/mm/userfaultfd.rst) - * Bits 58-60 zero + * Bit 58 pte is a guard region (since 6.15) (see madvise (2) man page) + * Bits 59-60 zero * Bit 61 page is file-page or shared-anon (since 3.5) * Bit 62 page swapped * Bit 63 page present @@ -37,12 +38,28 @@ There are four components to pagemap: precisely which pages are mapped (or in swap) and comparing mapped pages between processes. + Traditionally, bit 56 indicates that a page is mapped exactly once and bit + 56 is clear when a page is mapped multiple times, even when mapped in the + same process multiple times. In some kernel configurations, the semantics + for pages part of a larger allocation (e.g., THP) can differ: bit 56 is set + if all pages part of the corresponding large allocation are *certainly* + mapped in the same process, even if the page is mapped multiple times in that + process. Bit 56 is clear when any page page of the larger allocation + is *maybe* mapped in a different process. In some cases, a large allocation + might be treated as "maybe mapped by multiple processes" even though this + is no longer the case. + Efficient users of this interface will use ``/proc/pid/maps`` to determine which areas of memory are actually mapped and llseek to skip over unmapped regions. * ``/proc/kpagecount``. This file contains a 64-bit count of the number of - times each page is mapped, indexed by PFN. + times each page is mapped, indexed by PFN. Some kernel configurations do + not track the precise number of times a page part of a larger allocation + (e.g., THP) is mapped. In these configurations, the average number of + mappings per page in this larger allocation is returned instead. However, + if any page of the large allocation is mapped, the returned value will + be at least 1. The page-types tool in the tools/mm directory can be used to query the number of times a page is mapped. @@ -233,6 +250,7 @@ Following flags about pages are currently supported: - ``PAGE_IS_PFNZERO`` - Page has zero PFN - ``PAGE_IS_HUGE`` - Page is PMD-mapped THP or Hugetlb backed - ``PAGE_IS_SOFT_DIRTY`` - Page is soft-dirty +- ``PAGE_IS_GUARD`` - Page is a part of a guard region The ``struct pm_scan_arg`` is used as the argument of the IOCTL. diff --git a/Documentation/admin-guide/mm/zswap.rst b/Documentation/admin-guide/mm/zswap.rst index 3598dcd7dbe7..fd3370aa43fe 100644 --- a/Documentation/admin-guide/mm/zswap.rst +++ b/Documentation/admin-guide/mm/zswap.rst @@ -60,15 +60,13 @@ accessed. The compressed memory pool grows on demand and shrinks as compressed pages are freed. The pool is not preallocated. By default, a zpool of type selected in ``CONFIG_ZSWAP_ZPOOL_DEFAULT`` Kconfig option is created, but it can be overridden at boot time by setting the ``zpool`` attribute, -e.g. ``zswap.zpool=zbud``. It can also be changed at runtime using the sysfs +e.g. ``zswap.zpool=zsmalloc``. It can also be changed at runtime using the sysfs ``zpool`` attribute, e.g.:: - echo zbud > /sys/module/zswap/parameters/zpool + echo zsmalloc > /sys/module/zswap/parameters/zpool -The zbud type zpool allocates exactly 1 page to store 2 compressed pages, which -means the compression ratio will always be 2:1 or worse (because of half-full -zbud pages). The zsmalloc type zpool has a more complex compressed page -storage method, and it can achieve greater storage densities. +The zsmalloc type zpool has a complex compressed page storage method, and it +can achieve great storage densities. When a swap page is passed from swapout to zswap, zswap maintains a mapping of the swap entry, a combination of the swap type and swap offset, to the zpool |