diff options
Diffstat (limited to 'Documentation/admin-guide/kernel-parameters.txt')
| -rw-r--r-- | Documentation/admin-guide/kernel-parameters.txt | 82 |
1 files changed, 46 insertions, 36 deletions
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 138f6664b2e2..099c5a4be95b 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -53,7 +53,7 @@ ACPI_DEBUG_PRINT statements, e.g., ACPI_DEBUG_PRINT((ACPI_DB_INFO, ... The debug_level mask defaults to "info". See - Documentation/acpi/debug.txt for more information about + Documentation/firmware-guide/acpi/debug.rst for more information about debug layers and levels. Enable processor driver info messages: @@ -478,7 +478,7 @@ others). ccw_timeout_log [S390] - See Documentation/s390/CommonIO for details. + See Documentation/s390/common_io.rst for details. cgroup_disable= [KNL] Disable a particular controller Format: {name of the controller(s) to disable} @@ -516,7 +516,7 @@ /selinux/checkreqprot. cio_ignore= [S390] - See Documentation/s390/CommonIO for details. + See Documentation/s390/common_io.rst for details. clk_ignore_unused [CLK] Prevents the clock framework from automatically gating @@ -708,14 +708,14 @@ [KNL, x86_64] select a region under 4G first, and fall back to reserve region above 4G when '@offset' hasn't been specified. - See Documentation/kdump/kdump.txt for further details. + See Documentation/kdump/kdump.rst for further details. crashkernel=range1:size1[,range2:size2,...][@offset] [KNL] Same as above, but depends on the memory in the running system. The syntax of range is start-[end] where start and end are both a memory unit (amount[KMG]). See also - Documentation/kdump/kdump.txt for an example. + Documentation/kdump/kdump.rst for an example. crashkernel=size[KMG],high [KNL, x86_64] range could be above 4G. Allow kernel @@ -805,12 +805,10 @@ tracking down these problems. debug_pagealloc= - [KNL] When CONFIG_DEBUG_PAGEALLOC is set, this - parameter enables the feature at boot time. In - default, it is disabled. We can avoid allocating huge - chunk of memory for debug pagealloc if we don't enable - it at boot time and the system will work mostly same - with the kernel built without CONFIG_DEBUG_PAGEALLOC. + [KNL] When CONFIG_DEBUG_PAGEALLOC is set, this parameter + enables the feature at boot time. By default, it is + disabled and the system will work mostly the same as a + kernel built without CONFIG_DEBUG_PAGEALLOC. on: enable the feature debugpat [X86] Enable PAT debugging @@ -932,7 +930,7 @@ edid/1680x1050.bin, or edid/1920x1080.bin is given and no file with the same name exists. Details and instructions how to build your own EDID data are - available in Documentation/EDID/HOWTO.txt. An EDID + available in Documentation/EDID/howto.rst. An EDID data set will only be used for a particular connector, if its name and a colon are prepended to the EDID name. Each connector may use a unique EDID data @@ -963,7 +961,7 @@ for details. nompx [X86] Disables Intel Memory Protection Extensions. - See Documentation/x86/intel_mpx.txt for more + See Documentation/x86/intel_mpx.rst for more information about the feature. nopku [X86] Disable Memory Protection Keys CPU feature found @@ -1189,7 +1187,7 @@ that is to be dynamically loaded by Linux. If there are multiple variables with the same name but with different vendor GUIDs, all of them will be loaded. See - Documentation/acpi/ssdt-overlays.txt for details. + Documentation/admin-guide/acpi/ssdt-overlays.rst for details. eisa_irq_edge= [PARISC,HW] @@ -1209,7 +1207,7 @@ Specifies physical address of start of kernel core image elf header and optionally the size. Generally kexec loader will pass this option to capture kernel. - See Documentation/kdump/kdump.txt for details. + See Documentation/kdump/kdump.rst for details. enable_mtrr_cleanup [X86] The kernel tries to adjust MTRR layout from continuous @@ -1388,9 +1386,6 @@ Valid parameters: "on", "off" Default: "on" - hisax= [HW,ISDN] - See Documentation/isdn/README.HiSax. - hlt [BUGS=ARM,SH] hpet= [X86-32,HPET] option to control HPET usage @@ -1507,7 +1502,7 @@ Format: =0.0 to prevent dma on hda, =0.1 hdb =1.0 hdc .vlb_clock .pci_clock .noflush .nohpa .noprobe .nowerr .cdrom .chs .ignore_cable are additional options - See Documentation/ide/ide.txt. + See Documentation/ide/ide.rst. ide-generic.probe-mask= [HW] (E)IDE subsystem Format: <int> @@ -1673,6 +1668,15 @@ initrd= [BOOT] Specify the location of the initial ramdisk + init_on_alloc= [MM] Fill newly allocated pages and heap objects with + zeroes. + Format: 0 | 1 + Default set by CONFIG_INIT_ON_ALLOC_DEFAULT_ON. + + init_on_free= [MM] Fill freed pages and heap objects with zeroes. + Format: 0 | 1 + Default set by CONFIG_INIT_ON_FREE_DEFAULT_ON. + init_pkru= [x86] Specify the default memory protection keys rights register contents for all processes. 0x55555554 by default (disallow access to all but pkey 0). Can @@ -2383,7 +2387,7 @@ mce [X86-32] Machine Check Exception - mce=option [X86-64] See Documentation/x86/x86_64/boot-options.txt + mce=option [X86-64] See Documentation/x86/x86_64/boot-options.rst md= [HW] RAID subsystems devices and level See Documentation/admin-guide/md.rst. @@ -2439,7 +2443,7 @@ set according to the CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE kernel config option. - See Documentation/memory-hotplug.txt. + See Documentation/admin-guide/mm/memory-hotplug.rst. memmap=exactmap [KNL,X86] Enable setting of an exact E820 memory map, as specified by the user. @@ -2528,7 +2532,7 @@ mem_encrypt=on: Activate SME mem_encrypt=off: Do not activate SME - Refer to Documentation/x86/amd-memory-encryption.txt + Refer to Documentation/virtual/kvm/amd-memory-encryption.rst for details on when memory encryption can be activated. mem_sleep_default= [SUSPEND] Default system suspend mode: @@ -2836,8 +2840,9 @@ 0 - turn hardlockup detector in nmi_watchdog off 1 - turn hardlockup detector in nmi_watchdog on When panic is specified, panic when an NMI watchdog - timeout occurs (or 'nopanic' to override the opposite - default). To disable both hard and soft lockup detectors, + timeout occurs (or 'nopanic' to not panic on an NMI + watchdog, if CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is set) + To disable both hard and soft lockup detectors, please see 'nowatchdog'. This is useful when you use a panic=... timeout and need the box quickly up again. @@ -3528,7 +3533,7 @@ See Documentation/blockdev/paride.txt. pirq= [SMP,APIC] Manual mp-table setup - See Documentation/x86/i386/IO-APIC.txt. + See Documentation/x86/i386/IO-APIC.rst. plip= [PPT,NET] Parallel port network link Format: { parport<nr> | timid | 0 } @@ -3752,6 +3757,12 @@ the propagation of recent CPU-hotplug changes up the rcu_node combining tree. + rcutree.use_softirq= [KNL] + If set to zero, move all RCU_SOFTIRQ processing to + per-CPU rcuc kthreads. Defaults to a non-zero + value, meaning that RCU_SOFTIRQ is used by default. + Specify rcutree.use_softirq=0 to use rcuc kthreads. + rcutree.rcu_fanout_exact= [KNL] Disable autobalancing of the rcu_node combining tree. This is used by rcutorture, and might @@ -4078,7 +4089,7 @@ relax_domain_level= [KNL, SMP] Set scheduler's default relax_domain_level. - See Documentation/cgroup-v1/cpusets.txt. + See Documentation/cgroup-v1/cpusets.rst. reserve= [KNL,BUGS] Force kernel to ignore I/O ports or memory Format: <base1>,<size1>[,<base2>,<size2>,...] @@ -4588,7 +4599,7 @@ swapaccount=[0|1] [KNL] Enable accounting of swap in memory resource controller if no parameter or 1 is given or disable - it if 0 is given (See Documentation/cgroup-v1/memory.txt) + it if 0 is given (See Documentation/cgroup-v1/memory.rst) swiotlb= [ARM,IA-64,PPC,MIPS,X86] Format: { <int> | force | noforce } @@ -5026,7 +5037,7 @@ vector=percpu: enable percpu vector domain video= [FB] Frame buffer configuration - See Documentation/fb/modedb.txt. + See Documentation/fb/modedb.rst. video.brightness_switch_enabled= [0,1] If set to 1, on receiving an ACPI notify event @@ -5054,7 +5065,7 @@ Can be used multiple times for multiple devices. vga= [BOOT,X86-32] Select a particular video mode - See Documentation/x86/boot.txt and + See Documentation/x86/boot.rst and Documentation/svga.txt. Use vga=ask for menu. This is actually a boot loader parameter; the value is @@ -5100,13 +5111,12 @@ targets for exploits that can control RIP. emulate [default] Vsyscalls turn into traps and are - emulated reasonably safely. + emulated reasonably safely. The vsyscall + page is readable. - native Vsyscalls are native syscall instructions. - This is a little bit faster than trapping - and makes a few dynamic recompilers work - better than they would in emulation mode. - It also makes exploits much easier to write. + xonly Vsyscalls turn into traps and are + emulated reasonably safely. The vsyscall + page is not readable. none Vsyscalls don't work at all. This makes them quite hard to use for exploits but @@ -5162,7 +5172,7 @@ Default: 3 = cyan. watchdog timers [HW,WDT] For information on watchdog timers, - see Documentation/watchdog/watchdog-parameters.txt + see Documentation/watchdog/watchdog-parameters.rst or other driver-specific files in the Documentation/watchdog/ directory. |