diff options
Diffstat (limited to 'Documentation/admin-guide/kernel-parameters.txt')
| -rw-r--r-- | Documentation/admin-guide/kernel-parameters.txt | 212 |
1 files changed, 188 insertions, 24 deletions
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 56be1fc99bdd..f6d317e1674d 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -416,10 +416,6 @@ Format: { quiet (default) | verbose | debug } Change the amount of debugging information output when initialising the APIC and IO-APIC components. - For X86-32, this can also be used to specify an APIC - driver name. - Format: apic=driver_name - Examples: apic=bigsmp apic_extnmi= [APIC,X86,EARLY] External NMI delivery setting Format: { bsp (default) | all | none } @@ -462,6 +458,9 @@ arm64.nomops [ARM64] Unconditionally disable Memory Copy and Memory Set instructions support + arm64.nompam [ARM64] Unconditionally disable Memory Partitioning And + Monitoring support + arm64.nomte [ARM64] Unconditionally disable Memory Tagging Extension support @@ -634,6 +633,14 @@ named mounts. Specifying both "all" and "named" disables all v1 hierarchies. + cgroup_v1_proc= [KNL] Show also missing controllers in /proc/cgroups + Format: { "true" | "false" } + /proc/cgroups lists only v1 controllers by default. + This compatibility option enables listing also v2 + controllers (whose v1 code is not compiled!), so that + semi-legacy software can check this file to decide + about usage of v2 (sic) controllers. + cgroup_favordynmods= [KNL] Enable or Disable favordynmods. Format: { "true" | "false" } Defaults to the value of CONFIG_CGROUP_FAVOR_DYNMODS. @@ -1411,7 +1418,8 @@ earlyprintk=serial[,0x...[,baudrate]] earlyprintk=ttySn[,baudrate] earlyprintk=dbgp[debugController#] - earlyprintk=pciserial[,force],bus:device.function[,baudrate] + earlyprintk=mmio32,membase[,{nocfg|baudrate}] + earlyprintk=pciserial[,force],bus:device.function[,{nocfg|baudrate}] earlyprintk=xdbc[xhciController#] earlyprintk=bios @@ -1419,6 +1427,9 @@ the normal console is initialized. It is not enabled by default because it has some cosmetic problems. + Use "nocfg" to skip UART configuration, assume + BIOS/firmware has configured UART correctly. + Append ",keep" to not disable it when the real console takes over. @@ -1785,7 +1796,9 @@ allocation boundaries as a proactive defense against bounds-checking flaws in the kernel's copy_to_user()/copy_from_user() interface. - on Perform hardened usercopy checks (default). + The default is determined by + CONFIG_HARDENED_USERCOPY_DEFAULT_ON. + on Perform hardened usercopy checks. off Disable hardened usercopy checks. hardlockup_all_cpu_backtrace= @@ -1826,6 +1839,13 @@ lz4: Select LZ4 compression algorithm to compress/decompress hibernation image. + hibernate.pm_test_delay= + [HIBERNATION] + Sets the number of seconds to remain in a hibernation test + mode before resuming the system (see + /sys/power/pm_test). Only available when CONFIG_PM_DEBUG + is set. Default value is 5. + highmem=nn[KMG] [KNL,BOOT,EARLY] forces the highmem zone to have an exact size of <nn>. This works even on boxes that have no highmem otherwise. This also works to reduce highmem @@ -1861,7 +1881,7 @@ hpet_mmap= [X86, HPET_MMAP] Allow userspace to mmap HPET registers. Default set by CONFIG_HPET_MMAP_DEFAULT. - hugepages= [HW] Number of HugeTLB pages to allocate at boot. + hugepages= [HW,EARLY] Number of HugeTLB pages to allocate at boot. If this follows hugepagesz (below), it specifies the number of pages of hugepagesz to be allocated. If this is the first HugeTLB parameter on the command @@ -1873,15 +1893,24 @@ <node>:<integer>[,<node>:<integer>] hugepagesz= - [HW] The size of the HugeTLB pages. This is used in - conjunction with hugepages (above) to allocate huge - pages of a specific size at boot. The pair - hugepagesz=X hugepages=Y can be specified once for - each supported huge page size. Huge page sizes are - architecture dependent. See also + [HW,EARLY] The size of the HugeTLB pages. This is + used in conjunction with hugepages (above) to + allocate huge pages of a specific size at boot. The + pair hugepagesz=X hugepages=Y can be specified once + for each supported huge page size. Huge page sizes + are architecture dependent. See also Documentation/admin-guide/mm/hugetlbpage.rst. Format: size[KMG] + hugepage_alloc_threads= + [HW] The number of threads that should be used to + allocate hugepages during boot. This option can be + used to improve system bootup time when allocating + a large amount of huge pages. + The default value is 25% of the available hardware threads. + + Note that this parameter only applies to non-gigantic huge pages. + hugetlb_cma= [HW,CMA,EARLY] The size of a CMA area used for allocation of gigantic hugepages. Or using node format, the size of a CMA area per node can be specified. @@ -1892,6 +1921,13 @@ hugepages using the CMA allocator. If enabled, the boot-time allocation of gigantic hugepages is skipped. + hugetlb_cma_only= + [HW,CMA,EARLY] When allocating new HugeTLB pages, only + try to allocate from the CMA areas. + + This option does nothing if hugetlb_cma= is not also + specified. + hugetlb_free_vmemmap= [KNL] Requires CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP enabled. @@ -1933,6 +1969,12 @@ which allow the hypervisor to 'idle' the guest on lock contention. + hw_protection= [HW] + Format: reboot | shutdown + + Hardware protection action taken on critical events like + overtemperature or imminent voltage loss. + i2c_bus= [HW] Override the default board specific I2C bus speed or register an additional I2C bus that is not registered from board initialization code. @@ -2178,6 +2220,23 @@ different crypto accelerators. This option can be used to achieve best performance for particular HW. + indirect_target_selection= [X86,Intel] Mitigation control for Indirect + Target Selection(ITS) bug in Intel CPUs. Updated + microcode is also required for a fix in IBPB. + + on: Enable mitigation (default). + off: Disable mitigation. + force: Force the ITS bug and deploy default + mitigation. + vmexit: Only deploy mitigation if CPU is affected by + guest/host isolation part of ITS. + stuff: Deploy RSB-fill mitigation when retpoline is + also deployed. Otherwise, deploy the default + mitigation. + + For details see: + Documentation/admin-guide/hw-vuln/indirect-target-selection.rst + init= [KNL] Format: <full_path> Run specified binary instead of /sbin/init as init @@ -2316,6 +2375,9 @@ per_cpu_perf_limits Allow per-logical-CPU P-State performance control limits using cpufreq sysfs interface + no_cas + Do not enable capacity-aware scheduling (CAS) on + hybrid systems intremap= [X86-64,Intel-IOMMU,EARLY] on enable Interrupt Remapping (default) @@ -2698,6 +2760,31 @@ kgdbwait [KGDB,EARLY] Stop kernel execution and enter the kernel debugger at the earliest opportunity. + kho= [KEXEC,EARLY] + Format: { "0" | "1" | "off" | "on" | "y" | "n" } + Enables or disables Kexec HandOver. + "0" | "off" | "n" - kexec handover is disabled + "1" | "on" | "y" - kexec handover is enabled + + kho_scratch= [KEXEC,EARLY] + Format: ll[KMG],mm[KMG],nn[KMG] | nn% + Defines the size of the KHO scratch region. The KHO + scratch regions are physically contiguous memory + ranges that can only be used for non-kernel + allocations. That way, even when memory is heavily + fragmented with handed over memory, the kexeced + kernel will always have enough contiguous ranges to + bootstrap itself. + + It is possible to specify the exact amount of + memory in the form of "ll[KMG],mm[KMG],nn[KMG]" + where the first parameter defines the size of a low + memory scratch area, the second parameter defines + the size of a global scratch area and the third + parameter defines the size of additional per-node + scratch areas. The form "nn%" defines scale factor + (in percents) of memory that was used during boot. + kmac= [MIPS] Korina ethernet MAC address. Configure the RouterBoard 532 series on-chip Ethernet adapter MAC address. @@ -3666,6 +3753,7 @@ expose users to several CPU vulnerabilities. Equivalent to: if nokaslr then kpti=0 [ARM64] gather_data_sampling=off [X86] + indirect_target_selection=off [X86] kvm.nx_huge_pages=off [X86] l1tf=off [X86] mds=off [X86] @@ -4235,10 +4323,10 @@ nosmp [SMP,EARLY] Tells an SMP kernel to act as a UP kernel, and disable the IO APIC. legacy for "maxcpus=0". - nosmt [KNL,MIPS,PPC,S390,EARLY] Disable symmetric multithreading (SMT). + nosmt [KNL,MIPS,PPC,EARLY] Disable symmetric multithreading (SMT). Equivalent to smt=1. - [KNL,X86,PPC] Disable symmetric multithreading (SMT). + [KNL,X86,PPC,S390] Disable symmetric multithreading (SMT). nosmt=force: Force disable SMT, cannot be undone via the sysfs control file. @@ -5019,6 +5107,14 @@ Format: <bool> default: 0 (auto_verbose is enabled) + printk.debug_non_panic_cpus= + Allows storing messages from non-panic CPUs into + the printk log buffer during panic(). They are + flushed to consoles by the panic-CPU on + a best-effort basis. + Format: <bool> (1/Y/y=enable, 0/N/n=disable) + Default: disabled + printk.devkmsg={on,off,ratelimit} Control writing to /dev/kmsg. on - unlimited logging to /dev/kmsg from userspace @@ -5619,6 +5715,31 @@ are zero, rcutorture acts as if is interpreted they are all non-zero. + rcutorture.gpwrap_lag= [KNL] + Enable grace-period wrap lag testing. Setting + to false prevents the gpwrap lag test from + running. Default is true. + + rcutorture.gpwrap_lag_gps= [KNL] + Set the value for grace-period wrap lag during + active lag testing periods. This controls how many + grace periods differences we tolerate between + rdp and rnp's gp_seq before setting overflow flag. + The default is always set to 8. + + rcutorture.gpwrap_lag_cycle_mins= [KNL] + Set the total cycle duration for gpwrap lag + testing in minutes. This is the total time for + one complete cycle of active and inactive + testing periods. Default is 30 minutes. + + rcutorture.gpwrap_lag_active_mins= [KNL] + Set the duration for which gpwrap lag is active + within each cycle, in minutes. During this time, + the grace-period wrap lag will be set to the + value specified by gpwrap_lag_gps. Default is + 5 minutes. + rcutorture.irqreader= [KNL] Run RCU readers from irq handlers, or, more accurately, from a timer handler. Not all RCU @@ -5760,6 +5881,11 @@ rcutorture.test_boost_duration= [KNL] Duration (s) of each individual boost test. + rcutorture.test_boost_holdoff= [KNL] + Holdoff time (s) from start of test to the start + of RCU priority-boost testing. Defaults to zero, + that is, no holdoff. + rcutorture.test_boost_interval= [KNL] Interval (s) between each boost test. @@ -6084,7 +6210,7 @@ is assumed to be I/O ports; otherwise it is memory. reserve_mem= [RAM] - Format: nn[KNG]:<align>:<label> + Format: nn[KMG]:<align>:<label> Reserve physical memory and label it with a name that other subsystems can use to access it. This is typically used for systems that do not wipe the RAM, and this command @@ -6210,7 +6336,7 @@ port and the regular usb controller gets disabled. root= [KNL] Root filesystem - Usually this a a block device specifier of some kind, + Usually this is a block device specifier of some kind, see the early_lookup_bdev comment in block/early-lookup.c for details. Alternatively this can be "ram" for the legacy initial @@ -6237,6 +6363,11 @@ Memory area to be used by remote processor image, managed by CMA. + rt_group_sched= [KNL] Enable or disable SCHED_RR/FIFO group scheduling + when CONFIG_RT_GROUP_SCHED=y. Defaults to + !CONFIG_RT_GROUP_SCHED_DEFAULT_DISABLED. + Format: <bool> + rw [KNL] Mount root device read-write on boot S [KNL] Run init in single mode @@ -6584,6 +6715,8 @@ Selecting 'on' will also enable the mitigation against user space to user space task attacks. + Selecting specific mitigation does not force enable + user mitigations. Selecting 'off' will disable both the kernel and the user space protections. @@ -7283,6 +7416,15 @@ See also "Event triggers" in Documentation/trace/events.rst + traceoff_after_boot + [FTRACE] Sometimes tracing is used to debug issues + during the boot process. Since the trace buffer has a + limited amount of storage, it may be prudent to + disable tracing after the boot is finished, otherwise + the critical information may be overwritten. With this + option, the main tracing buffer will be turned off at + the end of the boot process. + traceoff_on_warning [FTRACE] enable this option to disable tracing when a warning is hit. This turns off "tracing_on". Tracing can @@ -7354,6 +7496,19 @@ having this key zero'ed is acceptable. E.g. in testing scenarios. + tsa= [X86] Control mitigation for Transient Scheduler + Attacks on AMD CPUs. Search the following in your + favourite search engine for more details: + + "Technical guidance for mitigating transient scheduler + attacks". + + off - disable the mitigation + on - enable the mitigation (default) + user - mitigate only user/kernel transitions + vm - mitigate only guest/host transitions + + tsc= Disable clocksource stability checks for TSC. Format: <string> [x86] reliable: mark tsc clocksource as reliable, this @@ -7481,6 +7636,22 @@ Note that genuine overcurrent events won't be reported either. + unaligned_scalar_speed= + [RISCV] + Format: {slow | fast | unsupported} + Allow skipping scalar unaligned access speed tests. This + is useful for testing alternative code paths and to skip + the tests in environments where they run too slowly. All + CPUs must have the same scalar unaligned access speed. + + unaligned_vector_speed= + [RISCV] + Format: {slow | fast | unsupported} + Allow skipping vector unaligned access speed tests. This + is useful for testing alternative code paths and to skip + the tests in environments where they run too slowly. All + CPUs must have the same vector unaligned access speed. + unknown_nmi_panic [X86] Cause panic on unknown NMI. @@ -7676,13 +7847,6 @@ 16 - SIGBUS faults Example: user_debug=31 - userpte= - [X86,EARLY] Flags controlling user PTE allocations. - - nohigh = do not allocate PTE pages in - HIGHMEM regardless of setting - of CONFIG_HIGHPTE. - vdso= [X86,SH,SPARC] On X86_32, this is an alias for vdso32=. Otherwise: |