diff options
Diffstat (limited to 'Documentation/ABI')
58 files changed, 510 insertions, 206 deletions
diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra index 16020b31ae64..5d41ebadf15e 100644 --- a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra +++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra @@ -5,7 +5,7 @@ Description: It is possible to switch the cpi setting of the mouse with the press of a button. When read, this file returns the raw number of the actual cpi setting reported by the mouse. This number has to be further - processed to receive the real dpi value. + processed to receive the real dpi value: VALUE DPI 1 400 diff --git a/Documentation/ABI/obsolete/sysfs-gpio b/Documentation/ABI/obsolete/sysfs-gpio index 40d41ea1a3f5..e0d4e5e2dd90 100644 --- a/Documentation/ABI/obsolete/sysfs-gpio +++ b/Documentation/ABI/obsolete/sysfs-gpio @@ -11,7 +11,7 @@ Description: Kernel code may export it for complete or partial access. GPIOs are identified as they are inside the kernel, using integers in - the range 0..INT_MAX. See Documentation/gpio for more information. + the range 0..INT_MAX. See Documentation/admin-guide/gpio for more information. /sys/class/gpio /export ... asks the kernel to export a GPIO to userspace diff --git a/Documentation/ABI/removed/sysfs-class-rfkill b/Documentation/ABI/removed/sysfs-class-rfkill index 3ce6231f20b2..9c08c7f98ffb 100644 --- a/Documentation/ABI/removed/sysfs-class-rfkill +++ b/Documentation/ABI/removed/sysfs-class-rfkill @@ -1,6 +1,6 @@ rfkill - radio frequency (RF) connector kill switch support -For details to this subsystem look at Documentation/rfkill.txt. +For details to this subsystem look at Documentation/driver-api/rfkill.rst. What: /sys/class/rfkill/rfkill[0-9]+/claim Date: 09-Jul-2007 diff --git a/Documentation/ABI/stable/sysfs-class-infiniband b/Documentation/ABI/stable/sysfs-class-infiniband index 17211ceb9bf4..aed21b8916a2 100644 --- a/Documentation/ABI/stable/sysfs-class-infiniband +++ b/Documentation/ABI/stable/sysfs-class-infiniband @@ -423,23 +423,6 @@ Description: (e.g. driver restart on the VM which owns the VF). -sysfs interface for NetEffect RNIC Low-Level iWARP driver (nes) ---------------------------------------------------------------- - -What: /sys/class/infiniband/nesX/hw_rev -What: /sys/class/infiniband/nesX/hca_type -What: /sys/class/infiniband/nesX/board_id -Date: Feb, 2008 -KernelVersion: v2.6.25 -Contact: linux-rdma@vger.kernel.org -Description: - hw_rev: (RO) Hardware revision number - - hca_type: (RO) Host Channel Adapter type (NEX020) - - board_id: (RO) Manufacturing board id - - sysfs interface for Chelsio T4/T5 RDMA driver (cxgb4) ----------------------------------------------------- diff --git a/Documentation/ABI/stable/sysfs-class-rfkill b/Documentation/ABI/stable/sysfs-class-rfkill index 80151a409d67..5b154f922643 100644 --- a/Documentation/ABI/stable/sysfs-class-rfkill +++ b/Documentation/ABI/stable/sysfs-class-rfkill @@ -1,6 +1,6 @@ rfkill - radio frequency (RF) connector kill switch support -For details to this subsystem look at Documentation/rfkill.txt. +For details to this subsystem look at Documentation/driver-api/rfkill.rst. For the deprecated /sys/class/rfkill/*/claim knobs of this interface look in Documentation/ABI/removed/sysfs-class-rfkill. diff --git a/Documentation/ABI/stable/sysfs-devices-node b/Documentation/ABI/stable/sysfs-devices-node index f7ce68fbd4b9..df8413cf1468 100644 --- a/Documentation/ABI/stable/sysfs-devices-node +++ b/Documentation/ABI/stable/sysfs-devices-node @@ -61,7 +61,7 @@ Date: October 2002 Contact: Linux Memory Management list <linux-mm@kvack.org> Description: The node's hit/miss statistics, in units of pages. - See Documentation/numastat.txt + See Documentation/admin-guide/numastat.rst What: /sys/devices/system/node/nodeX/distance Date: October 2002 diff --git a/Documentation/ABI/stable/sysfs-driver-mlxreg-io b/Documentation/ABI/stable/sysfs-driver-mlxreg-io index 156319fc5b80..8ca498447aeb 100644 --- a/Documentation/ABI/stable/sysfs-driver-mlxreg-io +++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io @@ -1,5 +1,4 @@ -What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ - asic_health +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_health Date: June 2018 KernelVersion: 4.19 @@ -9,9 +8,8 @@ Description: This file shows ASIC health status. The possible values are: The files are read only. -What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ - cpld1_version - cpld2_version +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_version +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_version Date: June 2018 KernelVersion: 4.19 Contact: Vadim Pasternak <vadimpmellanox.com> @@ -20,8 +18,7 @@ Description: These files show with which CPLD versions have been burned The files are read only. -What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ - fan_dir +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/fan_dir Date: December 2018 KernelVersion: 5.0 @@ -32,8 +29,7 @@ Description: This file shows the system fans direction: The files are read only. -What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ - jtag_enable +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_enable Date: November 2018 KernelVersion: 5.0 @@ -43,8 +39,7 @@ Description: These files show with which CPLD versions have been burned The files are read only. -What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ - jtag_enable +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_enable Date: November 2018 KernelVersion: 5.0 @@ -87,16 +82,15 @@ Description: These files allow asserting system power cycling, switching The files are write only. -What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ - reset_aux_pwr_or_ref - reset_asic_thermal - reset_hotswap_or_halt - reset_hotswap_or_wd - reset_fw_reset - reset_long_pb - reset_main_pwr_fail - reset_short_pb - reset_sw_reset +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_aux_pwr_or_ref +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_asic_thermal +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_hotswap_or_halt +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_hotswap_or_wd +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_fw_reset +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_long_pb +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_main_pwr_fail +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_short_pb +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_reset Date: June 2018 KernelVersion: 4.19 Contact: Vadim Pasternak <vadimpmellanox.com> @@ -110,11 +104,10 @@ Description: These files show the system reset cause, as following: power The files are read only. -What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ - reset_comex_pwr_fail - reset_from_comex - reset_system - reset_voltmon_upgrade_fail +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_pwr_fail +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_comex +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_system +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_voltmon_upgrade_fail Date: November 2018 KernelVersion: 5.0 @@ -127,3 +120,23 @@ Description: These files show the system reset cause, as following: ComEx the last reset cause. The files are read only. + +Date: June 2019 +KernelVersion: 5.3 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: These files show the system reset cause, as following: + COMEX thermal shutdown; wathchdog power off or reset was derived + by one of the next components: COMEX, switch board or by Small Form + Factor mezzanine, reset requested from ASIC, reset cuased by BIOS + reload. Value 1 in file means this is reset cause, 0 - otherwise. + Only one of the above causes could be 1 at the same time, representing + only last reset cause. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_thermal +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_wd +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_asic +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_reload_bios +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sff_wd +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_swb_wd diff --git a/Documentation/ABI/testing/debugfs-cec-error-inj b/Documentation/ABI/testing/debugfs-cec-error-inj index 122b65c5fe62..4c3596c6d25b 100644 --- a/Documentation/ABI/testing/debugfs-cec-error-inj +++ b/Documentation/ABI/testing/debugfs-cec-error-inj @@ -1,6 +1,6 @@ What: /sys/kernel/debug/cec/*/error-inj Date: March 2018 -Contact: Hans Verkuil <hans.verkuil@cisco.com> +Contact: Hans Verkuil <hverkuil-cisco@xs4all.nl> Description: The CEC Framework allows for CEC error injection commands through diff --git a/Documentation/ABI/testing/debugfs-cros-ec b/Documentation/ABI/testing/debugfs-cros-ec new file mode 100644 index 000000000000..1fe0add99a2a --- /dev/null +++ b/Documentation/ABI/testing/debugfs-cros-ec @@ -0,0 +1,56 @@ +What: /sys/kernel/debug/<cros-ec-device>/console_log +Date: September 2017 +KernelVersion: 4.13 +Description: + If the EC supports the CONSOLE_READ command type, this file + can be used to grab the EC logs. The kernel polls for the log + and keeps its own buffer but userspace should grab this and + write it out to some logs. + +What: /sys/kernel/debug/<cros-ec-device>/panicinfo +Date: September 2017 +KernelVersion: 4.13 +Description: + This file dumps the EC panic information from the previous + reboot. This file will only exist if the PANIC_INFO command + type is supported by the EC. + +What: /sys/kernel/debug/<cros-ec-device>/pdinfo +Date: June 2018 +KernelVersion: 4.17 +Description: + This file provides the port role, muxes and power debug + information for all the USB PD/type-C ports available. If + the are no ports available, this file will be just an empty + file. + +What: /sys/kernel/debug/<cros-ec-device>/uptime +Date: June 2019 +KernelVersion: 5.3 +Description: + A u32 providing the time since EC booted in ms. This is + is used for synchronizing the AP host time with the EC + log. An error is returned if the command is not supported + by the EC or there is a communication problem. + +What: /sys/kernel/debug/<cros-ec-device>/last_resume_result +Date: June 2019 +KernelVersion: 5.3 +Description: + Some ECs have a feature where they will track transitions to + the (Intel) processor's SLP_S0 line, in order to detect cases + where a system failed to go into S0ix. When the system resumes, + an EC with this feature will return a summary of SLP_S0 + transitions that occurred. The last_resume_result file returns + the most recent response from the AP's resume message to the EC. + + The bottom 31 bits contain a count of the number of SLP_S0 + transitions that occurred since the suspend message was + received. Bit 31 is set if the EC attempted to wake the + system due to a timeout when watching for SLP_S0 transitions. + Callers can use this to detect a wake from the EC due to + S0ix timeouts. The result will be zero if no suspend + transitions have been attempted, or the EC does not support + this feature. + + Output will be in the format: "0x%08x\n". diff --git a/Documentation/ABI/testing/debugfs-driver-habanalabs b/Documentation/ABI/testing/debugfs-driver-habanalabs index 2f5b80be07a3..f0ac14b70ecb 100644 --- a/Documentation/ABI/testing/debugfs-driver-habanalabs +++ b/Documentation/ABI/testing/debugfs-driver-habanalabs @@ -3,7 +3,10 @@ Date: Jan 2019 KernelVersion: 5.1 Contact: oded.gabbay@gmail.com Description: Sets the device address to be used for read or write through - PCI bar. The acceptable value is a string that starts with "0x" + PCI bar, or the device VA of a host mapped memory to be read or + written directly from the host. The latter option is allowed + only when the IOMMU is disabled. + The acceptable value is a string that starts with "0x" What: /sys/kernel/debug/habanalabs/hl<n>/command_buffers Date: Jan 2019 @@ -33,10 +36,12 @@ Contact: oded.gabbay@gmail.com Description: Allows the root user to read or write directly through the device's PCI bar. Writing to this file generates a write transaction while reading from the file generates a read - transcation. This custom interface is needed (instead of using + transaction. This custom interface is needed (instead of using the generic Linux user-space PCI mapping) because the DDR bar is very small compared to the DDR memory and only the driver can - move the bar before and after the transaction + move the bar before and after the transaction. + If the IOMMU is disabled, it also allows the root user to read + or write from the host a device VA of a host mapped memory What: /sys/kernel/debug/habanalabs/hl<n>/device Date: Jan 2019 @@ -46,6 +51,13 @@ Description: Enables the root user to set the device to specific state. Valid values are "disable", "enable", "suspend", "resume". User can read this property to see the valid values +What: /sys/kernel/debug/habanalabs/hl<n>/engines +Date: Jul 2019 +KernelVersion: 5.3 +Contact: oded.gabbay@gmail.com +Description: Displays the status registers values of the device engines and + their derived idle status + What: /sys/kernel/debug/habanalabs/hl<n>/i2c_addr Date: Jan 2019 KernelVersion: 5.1 diff --git a/Documentation/ABI/testing/debugfs-wilco-ec b/Documentation/ABI/testing/debugfs-wilco-ec index 73a5a66ddca6..9d8d9d2def5b 100644 --- a/Documentation/ABI/testing/debugfs-wilco-ec +++ b/Documentation/ABI/testing/debugfs-wilco-ec @@ -23,11 +23,9 @@ Description: For writing, bytes 0-1 indicate the message type, one of enum wilco_ec_msg_type. Byte 2+ consist of the data passed in the - request, starting at MBOX[0] - - At least three bytes are required for writing, two for the type - and at least a single byte of data. Only the first - EC_MAILBOX_DATA_SIZE bytes of MBOX will be used. + request, starting at MBOX[0]. At least three bytes are required + for writing, two for the type and at least a single byte of + data. Example: // Request EC info type 3 (EC firmware build date) @@ -40,7 +38,7 @@ Description: $ cat /sys/kernel/debug/wilco_ec/raw 00 00 31 32 2f 32 31 2f 31 38 00 38 00 01 00 2f 00 ..12/21/18.8... - Note that the first 32 bytes of the received MBOX[] will be - printed, even if some of the data is junk. It is up to you to - know how many of the first bytes of data are the actual - response. + Note that the first 16 bytes of the received MBOX[] will be + printed, even if some of the data is junk, and skipping bytes + 17 to 32. It is up to you to know how many of the first bytes of + data are the actual response. diff --git a/Documentation/ABI/testing/ima_policy b/Documentation/ABI/testing/ima_policy index 74c6702de74e..fc376a323908 100644 --- a/Documentation/ABI/testing/ima_policy +++ b/Documentation/ABI/testing/ima_policy @@ -24,11 +24,11 @@ Description: [euid=] [fowner=] [fsname=]] lsm: [[subj_user=] [subj_role=] [subj_type=] [obj_user=] [obj_role=] [obj_type=]] - option: [[appraise_type=]] [permit_directio] - + option: [[appraise_type=]] [template=] [permit_directio] base: func:= [BPRM_CHECK][MMAP_CHECK][CREDS_CHECK][FILE_CHECK][MODULE_CHECK] [FIRMWARE_CHECK] [KEXEC_KERNEL_CHECK] [KEXEC_INITRAMFS_CHECK] + [KEXEC_CMDLINE] mask:= [[^]MAY_READ] [[^]MAY_WRITE] [[^]MAY_APPEND] [[^]MAY_EXEC] fsmagic:= hex value @@ -38,6 +38,8 @@ Description: fowner:= decimal value lsm: are LSM specific option: appraise_type:= [imasig] + template:= name of a defined IMA template type + (eg, ima-ng). Only valid when action is "measure". pcr:= decimal value default policy: diff --git a/Documentation/ABI/testing/procfs-diskstats b/Documentation/ABI/testing/procfs-diskstats index abac31d216de..2c44b4f1b060 100644 --- a/Documentation/ABI/testing/procfs-diskstats +++ b/Documentation/ABI/testing/procfs-diskstats @@ -29,4 +29,4 @@ Description: 17 - sectors discarded 18 - time spent discarding - For more details refer to Documentation/iostats.txt + For more details refer to Documentation/admin-guide/iostats.rst diff --git a/Documentation/ABI/testing/procfs-smaps_rollup b/Documentation/ABI/testing/procfs-smaps_rollup index 0a54ed0d63c9..274df44d8b1b 100644 --- a/Documentation/ABI/testing/procfs-smaps_rollup +++ b/Documentation/ABI/testing/procfs-smaps_rollup @@ -3,18 +3,28 @@ Date: August 2017 Contact: Daniel Colascione <dancol@google.com> Description: This file provides pre-summed memory information for a - process. The format is identical to /proc/pid/smaps, + process. The format is almost identical to /proc/pid/smaps, except instead of an entry for each VMA in a process, smaps_rollup has a single entry (tagged "[rollup]") for which each field is the sum of the corresponding fields from all the maps in /proc/pid/smaps. - For more details, see the procfs man page. + Additionally, the fields Pss_Anon, Pss_File and Pss_Shmem + are not present in /proc/pid/smaps. These fields represent + the sum of the Pss field of each type (anon, file, shmem). + For more details, see Documentation/filesystems/proc.txt + and the procfs man page. Typical output looks like this: 00100000-ff709000 ---p 00000000 00:00 0 [rollup] + Size: 1192 kB + KernelPageSize: 4 kB + MMUPageSize: 4 kB Rss: 884 kB Pss: 385 kB + Pss_Anon: 301 kB + Pss_File: 80 kB + Pss_Shmem: 4 kB Shared_Clean: 696 kB Shared_Dirty: 0 kB Private_Clean: 120 kB diff --git a/Documentation/ABI/testing/pstore b/Documentation/ABI/testing/pstore index 5fca9f5e10a3..d45209abdb1b 100644 --- a/Documentation/ABI/testing/pstore +++ b/Documentation/ABI/testing/pstore @@ -1,6 +1,6 @@ -Where: /sys/fs/pstore/... (or /dev/pstore/...) +What: /sys/fs/pstore/... (or /dev/pstore/...) Date: March 2011 -Kernel Version: 2.6.39 +KernelVersion: 2.6.39 Contact: tony.luck@intel.com Description: Generic interface to platform dependent persistent storage. diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block index dfad7427817c..f8c7c7126bb1 100644 --- a/Documentation/ABI/testing/sysfs-block +++ b/Documentation/ABI/testing/sysfs-block @@ -15,7 +15,7 @@ Description: 9 - I/Os currently in progress 10 - time spent doing I/Os (ms) 11 - weighted time spent doing I/Os (ms) - For more details refer Documentation/iostats.txt + For more details refer Documentation/admin-guide/iostats.rst What: /sys/block/<disk>/<part>/stat diff --git a/Documentation/ABI/testing/sysfs-block-device b/Documentation/ABI/testing/sysfs-block-device index 82ef6eab042d..17f2bc7dd261 100644 --- a/Documentation/ABI/testing/sysfs-block-device +++ b/Documentation/ABI/testing/sysfs-block-device @@ -45,7 +45,7 @@ Description: - Values below -2 are rejected with -EINVAL For more information, see - Documentation/laptops/disk-shock-protection.txt + Documentation/admin-guide/laptops/disk-shock-protection.rst What: /sys/block/*/device/ncq_prio_enable diff --git a/Documentation/ABI/testing/sysfs-bus-css b/Documentation/ABI/testing/sysfs-bus-css index 2979c40c10e9..966f8504bd7b 100644 --- a/Documentation/ABI/testing/sysfs-bus-css +++ b/Documentation/ABI/testing/sysfs-bus-css @@ -33,3 +33,26 @@ Description: Contains the PIM/PAM/POM values, as reported by the in sync with the values current in the channel subsystem). Note: This is an I/O-subchannel specific attribute. Users: s390-tools, HAL + +What: /sys/bus/css/devices/.../driver_override +Date: June 2019 +Contact: Cornelia Huck <cohuck@redhat.com> + linux-s390@vger.kernel.org +Description: This file allows the driver for a device to be specified. When + specified, only a driver with a name matching the value written + to driver_override will have an opportunity to bind to the + device. The override is specified by writing a string to the + driver_override file (echo vfio-ccw > driver_override) and + may be cleared with an empty string (echo > driver_override). + This returns the device to standard matching rules binding. + Writing to driver_override does not automatically unbind the + device from its current driver or make any attempt to + automatically load the specified driver. If no driver with a + matching name is currently loaded in the kernel, the device + will not bind to any driver. This also allows devices to + opt-out of driver binding using a driver_override name such as + "none". Only a single driver may be specified in the override, + there is no support for parsing delimiters. + Note that unlike the mechanism of the same name for pci, this + file does not allow to override basic matching rules. I.e., + the driver must still match the subchannel type of the device. diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-format b/Documentation/ABI/testing/sysfs-bus-event_source-devices-format index 77f47ff5ee02..5bb793ec926c 100644 --- a/Documentation/ABI/testing/sysfs-bus-event_source-devices-format +++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-format @@ -1,6 +1,6 @@ -Where: /sys/bus/event_source/devices/<dev>/format +What: /sys/bus/event_source/devices/<dev>/format Date: January 2012 -Kernel Version: 3.3 +KernelVersion: 3.3 Contact: Jiri Olsa <jolsa@redhat.com> Description: Attribute group to describe the magic bits that go into diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-hm6352 b/Documentation/ABI/testing/sysfs-bus-i2c-devices-hm6352 index feb2e4a87075..4a251b7f11e4 100644 --- a/Documentation/ABI/testing/sysfs-bus-i2c-devices-hm6352 +++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-hm6352 @@ -1,20 +1,20 @@ -Where: /sys/bus/i2c/devices/.../heading0_input +What: /sys/bus/i2c/devices/.../heading0_input Date: April 2010 -Kernel Version: 2.6.36? +KernelVersion: 2.6.36? Contact: alan.cox@intel.com Description: Reports the current heading from the compass as a floating point value in degrees. -Where: /sys/bus/i2c/devices/.../power_state +What: /sys/bus/i2c/devices/.../power_state Date: April 2010 -Kernel Version: 2.6.36? +KernelVersion: 2.6.36? Contact: alan.cox@intel.com Description: Sets the power state of the device. 0 sets the device into sleep mode, 1 wakes it up. -Where: /sys/bus/i2c/devices/.../calibration +What: /sys/bus/i2c/devices/.../calibration Date: April 2010 -Kernel Version: 2.6.36? +KernelVersion: 2.6.36? Contact: alan.cox@intel.com Description: Sets the calibration on or off (1 = on, 0 = off). See the chip data sheet. diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index 6aef7dbbde44..680451695422 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -61,8 +61,11 @@ What: /sys/bus/iio/devices/triggerX/sampling_frequency_available KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: - When the internal sampling clock can only take a small - discrete set of values, this file lists those available. + When the internal sampling clock can only take a specific set of + frequencies, we can specify the available values with: + - a small discrete set of values like "0 2 4 6 8" + - a range with minimum, step and maximum frequencies like + "[min step max]" What: /sys/bus/iio/devices/iio:deviceX/oversampling_ratio KernelVersion: 2.6.38 diff --git a/Documentation/ABI/testing/sysfs-bus-iio-cros-ec b/Documentation/ABI/testing/sysfs-bus-iio-cros-ec index 0e95c2ca105c..6158f831c761 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-cros-ec +++ b/Documentation/ABI/testing/sysfs-bus-iio-cros-ec @@ -18,11 +18,11 @@ Description: values are 'base' and 'lid'. What: /sys/bus/iio/devices/iio:deviceX/id -Date: Septembre 2017 +Date: September 2017 KernelVersion: 4.14 Contact: linux-iio@vger.kernel.org Description: - This attribute is exposed by the CrOS EC legacy accelerometer - driver and represents the sensor ID as exposed by the EC. This - ID is used by the Android sensor service hardware abstraction - layer (sensor HAL) through the Android container on ChromeOS. + This attribute is exposed by the CrOS EC sensors driver and + represents the sensor ID as exposed by the EC. This ID is used + by the Android sensor service hardware abstraction layer (sensor + HAL) through the Android container on ChromeOS. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08 b/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08 index 0a1ca1487fa9..a133fd8d081a 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08 +++ b/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08 @@ -1,4 +1,4 @@ -What /sys/bus/iio/devices/iio:deviceX/sensor_sensitivity +What: /sys/bus/iio/devices/iio:deviceX/sensor_sensitivity Date: January 2017 KernelVersion: 4.11 Contact: linux-iio@vger.kernel.org @@ -6,7 +6,7 @@ Description: Show or set the gain boost of the amp, from 0-31 range. default 31 -What /sys/bus/iio/devices/iio:deviceX/sensor_max_range +What: /sys/bus/iio/devices/iio:deviceX/sensor_max_range Date: January 2017 KernelVersion: 4.11 Contact: linux-iio@vger.kernel.org diff --git a/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371 b/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371 new file mode 100644 index 000000000000..302de64cb424 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371 @@ -0,0 +1,44 @@ +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency +KernelVersion: +Contact: linux-iio@vger.kernel.org +Description: + Stores the PLL frequency in Hz for channel Y. + Reading returns the actual frequency in Hz. + The ADF4371 has an integrated VCO with fundamendal output + frequency ranging from 4000000000 Hz 8000000000 Hz. + + out_altvoltage0_frequency: + A divide by 1, 2, 4, 8, 16, 32 or circuit generates + frequencies from 62500000 Hz to 8000000000 Hz. + out_altvoltage1_frequency: + This channel duplicates the channel 0 frequency + out_altvoltage2_frequency: + A frequency doubler generates frequencies from + 8000000000 Hz to 16000000000 Hz. + out_altvoltage3_frequency: + A frequency quadrupler generates frequencies from + 16000000000 Hz to 32000000000 Hz. + + Note: writes to one of the channels will affect the frequency of + all the other channels, since it involves changing the VCO + fundamental output frequency. + +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_name +KernelVersion: +Contact: linux-iio@vger.kernel.org +Description: + Reading returns the datasheet name for channel Y: + + out_altvoltage0_name: RF8x + out_altvoltage1_name: RFAUX8x + out_altvoltage2_name: RF16x + out_altvoltage3_name: RF32x + +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown +KernelVersion: +Contact: linux-iio@vger.kernel.org +Description: + This attribute allows the user to power down the PLL and it's + RFOut buffers. + Writing 1 causes the specified channel to power down. + Clearing returns to normal operation. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 index 9a17ab5036a4..c59d95346341 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 +++ b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 @@ -1,4 +1,4 @@ -What /sys/bus/iio/devices/iio:deviceX/in_proximity_input +What: /sys/bus/iio/devices/iio:deviceX/in_proximity_input Date: March 2014 KernelVersion: 3.15 Contact: Matt Ranostay <matt.ranostay@konsulko.com> @@ -6,7 +6,7 @@ Description: Get the current distance in meters of storm (1km steps) 1000-40000 = distance in meters -What /sys/bus/iio/devices/iio:deviceX/sensor_sensitivity +What: /sys/bus/iio/devices/iio:deviceX/sensor_sensitivity Date: March 2014 KernelVersion: 3.15 Contact: Matt Ranostay <matt.ranostay@konsulko.com> diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats b/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats index 4b0318c99507..3c9a8c4a25eb 100644 --- a/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats +++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats @@ -9,9 +9,9 @@ errors may be "seen" / reported by the link partner and not the problematic endpoint itself (which may report all counters as 0 as it never saw any problems). -Where: /sys/bus/pci/devices/<dev>/aer_dev_correctable +What: /sys/bus/pci/devices/<dev>/aer_dev_correctable Date: July 2018 -Kernel Version: 4.19.0 +KernelVersion: 4.19.0 Contact: linux-pci@vger.kernel.org, rajatja@google.com Description: List of correctable errors seen and reported by this PCI device using ERR_COR. Note that since multiple errors may @@ -31,9 +31,9 @@ Header Log Overflow 0 TOTAL_ERR_COR 2 ------------------------------------------------------------------------- -Where: /sys/bus/pci/devices/<dev>/aer_dev_fatal +What: /sys/bus/pci/devices/<dev>/aer_dev_fatal Date: July 2018 -Kernel Version: 4.19.0 +KernelVersion: 4.19.0 Contact: linux-pci@vger.kernel.org, rajatja@google.com Description: List of uncorrectable fatal errors seen and reported by this PCI device using ERR_FATAL. Note that since multiple errors may @@ -62,9 +62,9 @@ TLP Prefix Blocked Error 0 TOTAL_ERR_FATAL 0 ------------------------------------------------------------------------- -Where: /sys/bus/pci/devices/<dev>/aer_dev_nonfatal +What: /sys/bus/pci/devices/<dev>/aer_dev_nonfatal Date: July 2018 -Kernel Version: 4.19.0 +KernelVersion: 4.19.0 Contact: linux-pci@vger.kernel.org, rajatja@google.com Description: List of uncorrectable nonfatal errors seen and reported by this PCI device using ERR_NONFATAL. Note that since multiple errors @@ -103,20 +103,20 @@ collectors) that are AER capable. These indicate the number of error messages as device, so these counters include them and are thus cumulative of all the error messages on the PCI hierarchy originating at that root port. -Where: /sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_cor +What: /sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_cor Date: July 2018 -Kernel Version: 4.19.0 +KernelVersion: 4.19.0 Contact: linux-pci@vger.kernel.org, rajatja@google.com Description: Total number of ERR_COR messages reported to rootport. -Where: /sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_fatal +What: /sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_fatal Date: July 2018 -Kernel Version: 4.19.0 +KernelVersion: 4.19.0 Contact: linux-pci@vger.kernel.org, rajatja@google.com Description: Total number of ERR_FATAL messages reported to rootport. -Where: /sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_nonfatal +What: /sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_nonfatal Date: July 2018 -Kernel Version: 4.19.0 +KernelVersion: 4.19.0 Contact: linux-pci@vger.kernel.org, rajatja@google.com Description: Total number of ERR_NONFATAL messages reported to rootport. diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss b/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss index 53d99edd1d75..92a94e1068c2 100644 --- a/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss +++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss @@ -1,68 +1,68 @@ -Where: /sys/bus/pci/devices/<dev>/ccissX/cXdY/model +What: /sys/bus/pci/devices/<dev>/ccissX/cXdY/model Date: March 2009 -Kernel Version: 2.6.30 +KernelVersion: 2.6.30 Contact: iss_storagedev@hp.com Description: Displays the SCSI INQUIRY page 0 model for logical drive Y of controller X. -Where: /sys/bus/pci/devices/<dev>/ccissX/cXdY/rev +What: /sys/bus/pci/devices/<dev>/ccissX/cXdY/rev Date: March 2009 -Kernel Version: 2.6.30 +KernelVersion: 2.6.30 Contact: iss_storagedev@hp.com Description: Displays the SCSI INQUIRY page 0 revision for logical drive Y of controller X. -Where: /sys/bus/pci/devices/<dev>/ccissX/cXdY/unique_id +What: /sys/bus/pci/devices/<dev>/ccissX/cXdY/unique_id Date: March 2009 -Kernel Version: 2.6.30 +KernelVersion: 2.6.30 Contact: iss_storagedev@hp.com Description: Displays the SCSI INQUIRY page 83 serial number for logical drive Y of controller X. -Where: /sys/bus/pci/devices/<dev>/ccissX/cXdY/vendor +What: /sys/bus/pci/devices/<dev>/ccissX/cXdY/vendor Date: March 2009 -Kernel Version: 2.6.30 +KernelVersion: 2.6.30 Contact: iss_storagedev@hp.com Description: Displays the SCSI INQUIRY page 0 vendor for logical drive Y of controller X. -Where: /sys/bus/pci/devices/<dev>/ccissX/cXdY/block:cciss!cXdY +What: /sys/bus/pci/devices/<dev>/ccissX/cXdY/block:cciss!cXdY Date: March 2009 -Kernel Version: 2.6.30 +KernelVersion: 2.6.30 Contact: iss_storagedev@hp.com Description: A symbolic link to /sys/block/cciss!cXdY -Where: /sys/bus/pci/devices/<dev>/ccissX/rescan +What: /sys/bus/pci/devices/<dev>/ccissX/rescan Date: August 2009 -Kernel Version: 2.6.31 +KernelVersion: 2.6.31 Contact: iss_storagedev@hp.com Description: Kicks of a rescan of the controller to discover logical drive topology changes. -Where: /sys/bus/pci/devices/<dev>/ccissX/cXdY/lunid +What: /sys/bus/pci/devices/<dev>/ccissX/cXdY/lunid Date: August 2009 -Kernel Version: 2.6.31 +KernelVersion: 2.6.31 Contact: iss_storagedev@hp.com Description: Displays the 8-byte LUN ID used to address logical drive Y of controller X. -Where: /sys/bus/pci/devices/<dev>/ccissX/cXdY/raid_level +What: /sys/bus/pci/devices/<dev>/ccissX/cXdY/raid_level Date: August 2009 -Kernel Version: 2.6.31 +KernelVersion: 2.6.31 Contact: iss_storagedev@hp.com Description: Displays the RAID level of logical drive Y of controller X. -Where: /sys/bus/pci/devices/<dev>/ccissX/cXdY/usage_count +What: /sys/bus/pci/devices/<dev>/ccissX/cXdY/usage_count Date: August 2009 -Kernel Version: 2.6.31 +KernelVersion: 2.6.31 Contact: iss_storagedev@hp.com Description: Displays the usage count (number of opens) of logical drive Y of controller X. -Where: /sys/bus/pci/devices/<dev>/ccissX/resettable +What: /sys/bus/pci/devices/<dev>/ccissX/resettable Date: February 2011 -Kernel Version: 2.6.38 +KernelVersion: 2.6.38 Contact: iss_storagedev@hp.com Description: Value of 1 indicates the controller can honor the reset_devices kernel parameter. Value of 0 indicates reset_devices cannot be @@ -71,9 +71,9 @@ Description: Value of 1 indicates the controller can honor the reset_devices a dump device, as kdump requires resetting the device in order to work reliably. -Where: /sys/bus/pci/devices/<dev>/ccissX/transport_mode +What: /sys/bus/pci/devices/<dev>/ccissX/transport_mode Date: July 2011 -Kernel Version: 3.0 +KernelVersion: 3.0 Contact: iss_storagedev@hp.com Description: Value of "simple" indicates that the controller has been placed in "simple mode". Value of "performant" indicates that the diff --git a/Documentation/ABI/testing/sysfs-bus-siox b/Documentation/ABI/testing/sysfs-bus-siox index fed7c3765a4e..c2a403f20b90 100644 --- a/Documentation/ABI/testing/sysfs-bus-siox +++ b/Documentation/ABI/testing/sysfs-bus-siox @@ -1,6 +1,6 @@ What: /sys/bus/siox/devices/siox-X/active KernelVersion: 4.16 -Contact: Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> +Contact: Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Description: On reading represents the current state of the bus. If it contains a "0" the bus is stopped and connected devices are @@ -12,7 +12,7 @@ Description: What: /sys/bus/siox/devices/siox-X/device_add KernelVersion: 4.16 -Contact: Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> +Contact: Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Description: Write-only file. Write @@ -27,13 +27,13 @@ Description: What: /sys/bus/siox/devices/siox-X/device_remove KernelVersion: 4.16 -Contact: Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> +Contact: Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Description: Write-only file. A single write removes the last device in the siox chain. What: /sys/bus/siox/devices/siox-X/poll_interval_ns KernelVersion: 4.16 -Contact: Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> +Contact: Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Description: Defines the interval between two poll cycles in nano seconds. Note this is rounded to jiffies on writing. On reading the current value @@ -41,33 +41,33 @@ Description: What: /sys/bus/siox/devices/siox-X-Y/connected KernelVersion: 4.16 -Contact: Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> +Contact: Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Description: Read-only value. "0" means the Yth device on siox bus X isn't "connected" i.e. communication with it is not ensured. "1" signals a working connection. What: /sys/bus/siox/devices/siox-X-Y/inbytes KernelVersion: 4.16 -Contact: Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> +Contact: Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Description: Read-only value reporting the inbytes value provided to siox-X/device_add What: /sys/bus/siox/devices/siox-X-Y/status_errors KernelVersion: 4.16 -Contact: Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> +Contact: Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Description: Counts the number of time intervals when the read status byte doesn't yield the expected value. What: /sys/bus/siox/devices/siox-X-Y/type KernelVersion: 4.16 -Contact: Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> +Contact: Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Description: Read-only value reporting the type value provided to siox-X/device_add. What: /sys/bus/siox/devices/siox-X-Y/watchdog KernelVersion: 4.16 -Contact: Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> +Contact: Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Description: Read-only value reporting if the watchdog of the siox device is active. "0" means the watchdog is not active and the device is expected to @@ -75,13 +75,13 @@ Description: What: /sys/bus/siox/devices/siox-X-Y/watchdog_errors KernelVersion: 4.16 -Contact: Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> +Contact: Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Description: Read-only value reporting the number to time intervals when the watchdog was active. What: /sys/bus/siox/devices/siox-X-Y/outbytes KernelVersion: 4.16 -Contact: Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> +Contact: Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Description: Read-only value reporting the outbytes value provided to siox-X/device_add. diff --git a/Documentation/ABI/testing/sysfs-bus-usb-devices-usbsevseg b/Documentation/ABI/testing/sysfs-bus-usb-devices-usbsevseg index 70d00dfa443d..9ade80f81f96 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb-devices-usbsevseg +++ b/Documentation/ABI/testing/sysfs-bus-usb-devices-usbsevseg @@ -1,14 +1,14 @@ -Where: /sys/bus/usb/.../powered +What: /sys/bus/usb/.../powered Date: August 2008 -Kernel Version: 2.6.26 +KernelVersion: 2.6.26 Contact: Harrison Metzger <harrisonmetz@gmail.com> Description: Controls whether the device's display will powered. A value of 0 is off and a non-zero value is on. -Where: /sys/bus/usb/.../mode_msb -Where: /sys/bus/usb/.../mode_lsb +What: /sys/bus/usb/.../mode_msb +What: /sys/bus/usb/.../mode_lsb Date: August 2008 -Kernel Version: 2.6.26 +KernelVersion: 2.6.26 Contact: Harrison Metzger <harrisonmetz@gmail.com> Description: Controls the devices display mode. For a 6 character display the values are @@ -16,24 +16,24 @@ Description: Controls the devices display mode. for an 8 character display the values are MSB 0x08; LSB 0xFF. -Where: /sys/bus/usb/.../textmode +What: /sys/bus/usb/.../textmode Date: August 2008 -Kernel Version: 2.6.26 +KernelVersion: 2.6.26 Contact: Harrison Metzger <harrisonmetz@gmail.com> Description: Controls the way the device interprets its text buffer. raw: each character controls its segment manually hex: each character is between 0-15 ascii: each character is between '0'-'9' and 'A'-'F'. -Where: /sys/bus/usb/.../text +What: /sys/bus/usb/.../text Date: August 2008 -Kernel Version: 2.6.26 +KernelVersion: 2.6.26 Contact: Harrison Metzger <harrisonmetz@gmail.com> Description: The text (or data) for the device to display -Where: /sys/bus/usb/.../decimals +What: /sys/bus/usb/.../decimals Date: August 2008 -Kernel Version: 2.6.26 +KernelVersion: 2.6.26 Contact: Harrison Metzger <harrisonmetz@gmail.com> Description: Controls the decimal places on the device. To set the nth decimal place, give this field diff --git a/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533 b/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533 index 77cf7ac949af..c0e0a9ae7b3d 100644 --- a/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533 +++ b/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533 @@ -4,7 +4,7 @@ KernelVersion: 3.5 Contact: Johan Hovold <jhovold@gmail.com> Description: Get the ALS output channel used as input in - ALS-current-control mode (0, 1), where + ALS-current-control mode (0, 1), where: 0 - out_current0 (backlight 0) 1 - out_current1 (backlight 1) @@ -28,7 +28,7 @@ Date: April 2012 KernelVersion: 3.5 Contact: Johan Hovold <jhovold@gmail.com> Description: - Set the brightness-mapping mode (0, 1), where + Set the brightness-mapping mode (0, 1), where: 0 - exponential mode 1 - linear mode @@ -38,7 +38,7 @@ Date: April 2012 KernelVersion: 3.5 Contact: Johan Hovold <jhovold@gmail.com> Description: - Set the PWM-input control mask (5 bits), where + Set the PWM-input control mask (5 bits), where: bit 5 - PWM-input enabled in Zone 4 bit 4 - PWM-input enabled in Zone 3 diff --git a/Documentation/ABI/testing/sysfs-class-cxl b/Documentation/ABI/testing/sysfs-class-cxl index bbbabffc682a..7970e3713e70 100644 --- a/Documentation/ABI/testing/sysfs-class-cxl +++ b/Documentation/ABI/testing/sysfs-class-cxl @@ -1,6 +1,6 @@ -Note: Attributes that are shared between devices are stored in the directory -pointed to by the symlink device/. -Example: The real path of the attribute /sys/class/cxl/afu0.0s/irqs_max is +Please note that attributes that are shared between devices are stored in +the directory pointed to by the symlink device/. +For example, the real path of the attribute /sys/class/cxl/afu0.0s/irqs_max is /sys/class/cxl/afu0.0s/device/irqs_max, i.e. /sys/class/cxl/afu0.0/irqs_max. diff --git a/Documentation/ABI/testing/sysfs-class-devfreq b/Documentation/ABI/testing/sysfs-class-devfreq index ee39acacf6f8..01196e19afca 100644 --- a/Documentation/ABI/testing/sysfs-class-devfreq +++ b/Documentation/ABI/testing/sysfs-class-devfreq @@ -47,7 +47,7 @@ Description: What: /sys/class/devfreq/.../trans_stat Date: October 2012 Contact: MyungJoo Ham <myungjoo.ham@samsung.com> -Descrtiption: +Description: This ABI shows the statistics of devfreq behavior on a specific device. It shows the time spent in each state and the number of transitions between states. diff --git a/Documentation/ABI/testing/sysfs-class-led-driver-lm3533 b/Documentation/ABI/testing/sysfs-class-led-driver-lm3533 index 620ebb3b9baa..e4c89b261546 100644 --- a/Documentation/ABI/testing/sysfs-class-led-driver-lm3533 +++ b/Documentation/ABI/testing/sysfs-class-led-driver-lm3533 @@ -4,7 +4,7 @@ KernelVersion: 3.5 Contact: Johan Hovold <jhovold@gmail.com> Description: Set the ALS output channel to use as input in - ALS-current-control mode (1, 2), where + ALS-current-control mode (1, 2), where: 1 - out_current1 2 - out_current2 @@ -22,7 +22,7 @@ Date: April 2012 KernelVersion: 3.5 Contact: Johan Hovold <jhovold@gmail.com> Description: - Set the pattern generator fall and rise times (0..7), where + Set the pattern generator fall and rise times (0..7), where: 0 - 2048 us 1 - 262 ms @@ -45,7 +45,7 @@ Date: April 2012 KernelVersion: 3.5 Contact: Johan Hovold <jhovold@gmail.com> Description: - Set the brightness-mapping mode (0, 1), where + Set the brightness-mapping mode (0, 1), where: 0 - exponential mode 1 - linear mode @@ -55,7 +55,7 @@ Date: April 2012 KernelVersion: 3.5 Contact: Johan Hovold <jhovold@gmail.com> Description: - Set the PWM-input control mask (5 bits), where + Set the PWM-input control mask (5 bits), where: bit 5 - PWM-input enabled in Zone 4 bit 4 - PWM-input enabled in Zone 3 diff --git a/Documentation/ABI/testing/sysfs-class-leds-gt683r b/Documentation/ABI/testing/sysfs-class-leds-gt683r index e4fae6026e79..6adab27f646e 100644 --- a/Documentation/ABI/testing/sysfs-class-leds-gt683r +++ b/Documentation/ABI/testing/sysfs-class-leds-gt683r @@ -5,7 +5,7 @@ Contact: Janne Kanniainen <janne.kanniainen@gmail.com> Description: Set the mode of LEDs. You should notice that changing the mode of one LED will update the mode of its two sibling devices as - well. + well. Possible values are: 0 - normal 1 - audio @@ -13,4 +13,4 @@ Description: Normal: LEDs are fully on when enabled Audio: LEDs brightness depends on sound level - Breathing: LEDs brightness varies at human breathing rate
\ No newline at end of file + Breathing: LEDs brightness varies at human breathing rate diff --git a/Documentation/ABI/testing/sysfs-class-net-phydev b/Documentation/ABI/testing/sysfs-class-net-phydev index 2a5723343aba..206cbf538b59 100644 --- a/Documentation/ABI/testing/sysfs-class-net-phydev +++ b/Documentation/ABI/testing/sysfs-class-net-phydev @@ -41,3 +41,11 @@ Description: xgmii, moca, qsgmii, trgmii, 1000base-x, 2500base-x, rxaui, xaui, 10gbase-kr, unknown +What: /sys/class/mdio_bus/<bus>/<device>/phy_standalone +Date: May 2019 +KernelVersion: 5.3 +Contact: netdev@vger.kernel.org +Description: + Boolean value indicating whether the PHY device is used in + standalone mode, without a net_device associated, by PHYLINK. + Attribute created only when this is the case. diff --git a/Documentation/ABI/testing/sysfs-class-net-qmi b/Documentation/ABI/testing/sysfs-class-net-qmi index 7122d6264c49..c310db4ccbc2 100644 --- a/Documentation/ABI/testing/sysfs-class-net-qmi +++ b/Documentation/ABI/testing/sysfs-class-net-qmi @@ -29,7 +29,7 @@ Contact: Bjørn Mork <bjorn@mork.no> Description: Unsigned integer. - Write a number ranging from 1 to 127 to add a qmap mux + Write a number ranging from 1 to 254 to add a qmap mux based network device, supported by recent Qualcomm based modems. @@ -46,5 +46,5 @@ Contact: Bjørn Mork <bjorn@mork.no> Description: Unsigned integer. - Write a number ranging from 1 to 127 to delete a previously + Write a number ranging from 1 to 254 to delete a previously created qmap mux based network device. diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power index b77e30b9014e..27edc06e2495 100644 --- a/Documentation/ABI/testing/sysfs-class-power +++ b/Documentation/ABI/testing/sysfs-class-power @@ -376,10 +376,42 @@ Description: supply. Normally this is configured based on the type of connection made (e.g. A configured SDP should output a maximum of 500mA so the input current limit is set to the same value). + Use preferably input_power_limit, and for problems that can be + solved using power limit use input_current_limit. Access: Read, Write Valid values: Represented in microamps +What: /sys/class/power_supply/<supply_name>/input_voltage_limit +Date: May 2019 +Contact: linux-pm@vger.kernel.org +Description: + This entry configures the incoming VBUS voltage limit currently + set in the supply. Normally this is configured based on + system-level knowledge or user input (e.g. This is part of the + Pixel C's thermal management strategy to effectively limit the + input power to 5V when the screen is on to meet Google's skin + temperature targets). Note that this feature should not be + used for safety critical things. + Use preferably input_power_limit, and for problems that can be + solved using power limit use input_voltage_limit. + + Access: Read, Write + Valid values: Represented in microvolts + +What: /sys/class/power_supply/<supply_name>/input_power_limit +Date: May 2019 +Contact: linux-pm@vger.kernel.org +Description: + This entry configures the incoming power limit currently set + in the supply. Normally this is configured based on + system-level knowledge or user input. Use preferably this + feature to limit the incoming power and use current/voltage + limit only for problems that can be solved using power limit. + + Access: Read, Write + Valid values: Represented in microwatts + What: /sys/class/power_supply/<supply_name>/online, Date: May 2007 Contact: linux-pm@vger.kernel.org diff --git a/Documentation/ABI/testing/sysfs-class-power-wilco b/Documentation/ABI/testing/sysfs-class-power-wilco new file mode 100644 index 000000000000..da1d6ffe5e3c --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-power-wilco @@ -0,0 +1,30 @@ +What: /sys/class/power_supply/wilco-charger/charge_type +Date: April 2019 +KernelVersion: 5.2 +Description: + What charging algorithm to use: + + Standard: Fully charges battery at a standard rate. + Adaptive: Battery settings adaptively optimized based on + typical battery usage pattern. + Fast: Battery charges over a shorter period. + Trickle: Extends battery lifespan, intended for users who + primarily use their Chromebook while connected to AC. + Custom: A low and high threshold percentage is specified. + Charging begins when level drops below + charge_control_start_threshold, and ceases when + level is above charge_control_end_threshold. + +What: /sys/class/power_supply/wilco-charger/charge_control_start_threshold +Date: April 2019 +KernelVersion: 5.2 +Description: + Used when charge_type="Custom", as described above. Measured in + percentages. The valid range is [50, 95]. + +What: /sys/class/power_supply/wilco-charger/charge_control_end_threshold +Date: April 2019 +KernelVersion: 5.2 +Description: + Used when charge_type="Custom", as described above. Measured in + percentages. The valid range is [55, 100]. diff --git a/Documentation/ABI/testing/sysfs-class-powercap b/Documentation/ABI/testing/sysfs-class-powercap index db3b3ff70d84..ca491ec4e693 100644 --- a/Documentation/ABI/testing/sysfs-class-powercap +++ b/Documentation/ABI/testing/sysfs-class-powercap @@ -5,7 +5,7 @@ Contact: linux-pm@vger.kernel.org Description: The powercap/ class sub directory belongs to the power cap subsystem. Refer to - Documentation/power/powercap/powercap.txt for details. + Documentation/power/powercap/powercap.rst for details. What: /sys/class/powercap/<control type> Date: September 2013 @@ -147,6 +147,6 @@ What: /sys/class/powercap/.../<power zone>/enabled Date: September 2013 KernelVersion: 3.13 Contact: linux-pm@vger.kernel.org -Description +Description: This allows to enable/disable power capping at power zone level. This applies to current power zone and its children. diff --git a/Documentation/ABI/testing/sysfs-class-switchtec b/Documentation/ABI/testing/sysfs-class-switchtec index 48cb4c15e430..76c7a661a595 100644 --- a/Documentation/ABI/testing/sysfs-class-switchtec +++ b/Documentation/ABI/testing/sysfs-class-switchtec @@ -1,6 +1,6 @@ switchtec - Microsemi Switchtec PCI Switch Management Endpoint -For details on this subsystem look at Documentation/switchtec.txt. +For details on this subsystem look at Documentation/driver-api/switchtec.rst. What: /sys/class/switchtec Date: 05-Jan-2017 diff --git a/Documentation/ABI/testing/sysfs-class-uwb_rc b/Documentation/ABI/testing/sysfs-class-uwb_rc index 85f4875d16ac..a0578751c1e3 100644 --- a/Documentation/ABI/testing/sysfs-class-uwb_rc +++ b/Documentation/ABI/testing/sysfs-class-uwb_rc @@ -125,12 +125,6 @@ Description: The EUI-48 of this device in colon separated hex octets. -What: /sys/class/uwb_rc/uwbN/<EUI-48>/BPST -Date: July 2008 -KernelVersion: 2.6.27 -Contact: linux-usb@vger.kernel.org -Description: - What: /sys/class/uwb_rc/uwbN/<EUI-48>/IEs Date: July 2008 KernelVersion: 2.6.27 diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 87478ac6c2af..5f7d7b14fa44 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -34,7 +34,7 @@ Description: CPU topology files that describe kernel limits related to present: cpus that have been identified as being present in the system. - See Documentation/cputopology.txt for more information. + See Documentation/admin-guide/cputopology.rst for more information. What: /sys/devices/system/cpu/probe @@ -103,7 +103,7 @@ Description: CPU topology files that describe a logical CPU's relationship thread_siblings_list: human-readable list of cpu#'s hardware threads within the same core as cpu# - See Documentation/cputopology.txt for more information. + See Documentation/admin-guide/cputopology.rst for more information. What: /sys/devices/system/cpu/cpuidle/current_driver @@ -539,3 +539,26 @@ Description: Intel Energy and Performance Bias Hint (EPB) This attribute is present for all online CPUs supporting the Intel EPB feature. + +What: /sys/devices/system/cpu/umwait_control + /sys/devices/system/cpu/umwait_control/enable_c02 + /sys/devices/system/cpu/umwait_control/max_time +Date: May 2019 +Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> +Description: Umwait control + + enable_c02: Read/write interface to control umwait C0.2 state + Read returns C0.2 state status: + 0: C0.2 is disabled + 1: C0.2 is enabled + + Write 'y' or '1' or 'on' to enable C0.2 state. + Write 'n' or '0' or 'off' to disable C0.2 state. + + The interface is case insensitive. + + max_time: Read/write interface to control umwait maximum time + in TSC-quanta that the CPU can reside in either C0.1 + or C0.2 state. The time is an unsigned 32-bit number. + Note that a value of zero means there is no limit. + Low order two bits must be zero. diff --git a/Documentation/ABI/testing/sysfs-driver-altera-cvp b/Documentation/ABI/testing/sysfs-driver-altera-cvp index 8cde64a71edb..fbd8078fd7ad 100644 --- a/Documentation/ABI/testing/sysfs-driver-altera-cvp +++ b/Documentation/ABI/testing/sysfs-driver-altera-cvp @@ -1,6 +1,6 @@ What: /sys/bus/pci/drivers/altera-cvp/chkcfg Date: May 2017 -Kernel Version: 4.13 +KernelVersion: 4.13 Contact: Anatolij Gustschin <agust@denx.de> Description: Contains either 1 or 0 and controls if configuration diff --git a/Documentation/ABI/testing/sysfs-driver-habanalabs b/Documentation/ABI/testing/sysfs-driver-habanalabs index 78b2bcf316a3..f433fc6db3c6 100644 --- a/Documentation/ABI/testing/sysfs-driver-habanalabs +++ b/Documentation/ABI/testing/sysfs-driver-habanalabs @@ -62,18 +62,20 @@ What: /sys/class/habanalabs/hl<n>/ic_clk Date: Jan 2019 KernelVersion: 5.1 Contact: oded.gabbay@gmail.com -Description: Allows the user to set the maximum clock frequency of the - Interconnect fabric. Writes to this parameter affect the device - only when the power management profile is set to "manual" mode. - The device IC clock might be set to lower value then the +Description: Allows the user to set the maximum clock frequency, in Hz, of + the Interconnect fabric. Writes to this parameter affect the + device only when the power management profile is set to "manual" + mode. The device IC clock might be set to lower value than the maximum. The user should read the ic_clk_curr to see the actual - frequency value of the IC + frequency value of the IC. This property is valid only for the + Goya ASIC family What: /sys/class/habanalabs/hl<n>/ic_clk_curr Date: Jan 2019 KernelVersion: 5.1 Contact: oded.gabbay@gmail.com -Description: Displays the current clock frequency of the Interconnect fabric +Description: Displays the current clock frequency, in Hz, of the Interconnect + fabric. This property is valid only for the Goya ASIC family What: /sys/class/habanalabs/hl<n>/infineon_ver Date: Jan 2019 @@ -92,18 +94,20 @@ What: /sys/class/habanalabs/hl<n>/mme_clk Date: Jan 2019 KernelVersion: 5.1 Contact: oded.gabbay@gmail.com -Description: Allows the user to set the maximum clock frequency of the - MME compute engine. Writes to this parameter affect the device - only when the power management profile is set to "manual" mode. - The device MME clock might be set to lower value then the +Description: Allows the user to set the maximum clock frequency, in Hz, of + the MME compute engine. Writes to this parameter affect the + device only when the power management profile is set to "manual" + mode. The device MME clock might be set to lower value than the maximum. The user should read the mme_clk_curr to see the actual - frequency value of the MME + frequency value of the MME. This property is valid only for the + Goya ASIC family What: /sys/class/habanalabs/hl<n>/mme_clk_curr Date: Jan 2019 KernelVersion: 5.1 Contact: oded.gabbay@gmail.com -Description: Displays the current clock frequency of the MME compute engine +Description: Displays the current clock frequency, in Hz, of the MME compute + engine. This property is valid only for the Goya ASIC family What: /sys/class/habanalabs/hl<n>/pci_addr Date: Jan 2019 @@ -163,18 +167,20 @@ What: /sys/class/habanalabs/hl<n>/tpc_clk Date: Jan 2019 KernelVersion: 5.1 Contact: oded.gabbay@gmail.com -Description: Allows the user to set the maximum clock frequency of the - TPC compute engines. Writes to this parameter affect the device - only when the power management profile is set to "manual" mode. - The device TPC clock might be set to lower value then the +Description: Allows the user to set the maximum clock frequency, in Hz, of + the TPC compute engines. Writes to this parameter affect the + device only when the power management profile is set to "manual" + mode. The device TPC clock might be set to lower value than the maximum. The user should read the tpc_clk_curr to see the actual - frequency value of the TPC + frequency value of the TPC. This property is valid only for + Goya ASIC family What: /sys/class/habanalabs/hl<n>/tpc_clk_curr Date: Jan 2019 KernelVersion: 5.1 Contact: oded.gabbay@gmail.com -Description: Displays the current clock frequency of the TPC compute engines +Description: Displays the current clock frequency, in Hz, of the TPC compute + engines. This property is valid only for the Goya ASIC family What: /sys/class/habanalabs/hl<n>/uboot_ver Date: Jan 2019 diff --git a/Documentation/ABI/testing/sysfs-driver-hid b/Documentation/ABI/testing/sysfs-driver-hid index 48942cacb0bf..a59533410871 100644 --- a/Documentation/ABI/testing/sysfs-driver-hid +++ b/Documentation/ABI/testing/sysfs-driver-hid @@ -1,6 +1,6 @@ -What: For USB devices : /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/report_descriptor - For BT devices : /sys/class/bluetooth/hci<addr>/<hid-bus>:<vendor-id>:<product-id>.<num>/report_descriptor - Symlink : /sys/class/hidraw/hidraw<num>/device/report_descriptor +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/report_descriptor +What: /sys/class/bluetooth/hci<addr>/<hid-bus>:<vendor-id>:<product-id>.<num>/report_descriptor +What: /sys/class/hidraw/hidraw<num>/device/report_descriptor Date: Jan 2011 KernelVersion: 2.0.39 Contact: Alan Ott <alan@signal11.us> @@ -9,9 +9,9 @@ Description: When read, this file returns the device's raw binary HID This file cannot be written. Users: HIDAPI library (http://www.signal11.us/oss/hidapi) -What: For USB devices : /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/country - For BT devices : /sys/class/bluetooth/hci<addr>/<hid-bus>:<vendor-id>:<product-id>.<num>/country - Symlink : /sys/class/hidraw/hidraw<num>/device/country +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/country +What: /sys/class/bluetooth/hci<addr>/<hid-bus>:<vendor-id>:<product-id>.<num>/country +What: /sys/class/hidraw/hidraw<num>/device/country Date: February 2015 KernelVersion: 3.19 Contact: Olivier Gay <ogay@logitech.com> diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone index 3ca3971109bf..8f7982c70d72 100644 --- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone +++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone @@ -5,7 +5,7 @@ Description: It is possible to switch the dpi setting of the mouse with the press of a button. When read, this file returns the raw number of the actual dpi setting reported by the mouse. This number has to be further - processed to receive the real dpi value. + processed to receive the real dpi value: VALUE DPI 1 800 diff --git a/Documentation/ABI/testing/sysfs-driver-ppi b/Documentation/ABI/testing/sysfs-driver-ppi index 9921ef285899..1a56fc507689 100644 --- a/Documentation/ABI/testing/sysfs-driver-ppi +++ b/Documentation/ABI/testing/sysfs-driver-ppi @@ -1,6 +1,6 @@ What: /sys/class/tpm/tpmX/ppi/ Date: August 2012 -Kernel Version: 3.6 +KernelVersion: 3.6 Contact: xiaoyan.zhang@intel.com Description: This folder includes the attributes related with PPI (Physical diff --git a/Documentation/ABI/testing/sysfs-driver-st b/Documentation/ABI/testing/sysfs-driver-st index ba5d77008a85..88cab66fd77f 100644 --- a/Documentation/ABI/testing/sysfs-driver-st +++ b/Documentation/ABI/testing/sysfs-driver-st @@ -1,6 +1,6 @@ What: /sys/bus/scsi/drivers/st/debug_flag Date: October 2015 -Kernel Version: ?.? +KernelVersion: ?.? Contact: shane.seymour@hpe.com Description: This file allows you to turn debug output from the st driver diff --git a/Documentation/ABI/testing/sysfs-driver-wacom b/Documentation/ABI/testing/sysfs-driver-wacom index 2aa5503ee200..afc48fc163b5 100644 --- a/Documentation/ABI/testing/sysfs-driver-wacom +++ b/Documentation/ABI/testing/sysfs-driver-wacom @@ -1,6 +1,6 @@ What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/speed Date: April 2010 -Kernel Version: 2.6.35 +KernelVersion: 2.6.35 Contact: linux-bluetooth@vger.kernel.org Description: The /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/speed file diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs index 91822ce25831..dca326e0ee3e 100644 --- a/Documentation/ABI/testing/sysfs-fs-f2fs +++ b/Documentation/ABI/testing/sysfs-fs-f2fs @@ -243,3 +243,11 @@ Description: - Del: echo '[h/c]!extension' > /sys/fs/f2fs/<disk>/extension_list - [h] means add/del hot file extension - [c] means add/del cold file extension + +What: /sys/fs/f2fs/<disk>/unusable +Date April 2019 +Contact: "Daniel Rosenberg" <drosen@google.com> +Description: + If checkpoint=disable, it displays the number of blocks that are unusable. + If checkpoint=enable it displays the enumber of blocks that would be unusable + if checkpoint=disable were to be set. diff --git a/Documentation/ABI/testing/sysfs-kernel-fscaps b/Documentation/ABI/testing/sysfs-kernel-fscaps index 50a3033b5e15..bcff34665192 100644 --- a/Documentation/ABI/testing/sysfs-kernel-fscaps +++ b/Documentation/ABI/testing/sysfs-kernel-fscaps @@ -2,7 +2,7 @@ What: /sys/kernel/fscaps Date: February 2011 KernelVersion: 2.6.38 Contact: Ludwig Nussel <ludwig.nussel@suse.de> -Description +Description: Shows whether file system capabilities are honored when executing a binary diff --git a/Documentation/ABI/testing/sysfs-kernel-iommu_groups b/Documentation/ABI/testing/sysfs-kernel-iommu_groups index 35c64e00b35c..017f5bc3920c 100644 --- a/Documentation/ABI/testing/sysfs-kernel-iommu_groups +++ b/Documentation/ABI/testing/sysfs-kernel-iommu_groups @@ -24,3 +24,12 @@ Description: /sys/kernel/iommu_groups/reserved_regions list IOVA region is described on a single line: the 1st field is the base IOVA, the second is the end IOVA and the third field describes the type of the region. + +What: /sys/kernel/iommu_groups/reserved_regions +Date: June 2019 +KernelVersion: v5.3 +Contact: Eric Auger <eric.auger@redhat.com> +Description: In case an RMRR is used only by graphics or USB devices + it is now exposed as "direct-relaxable" instead of "direct". + In device assignment use case, for instance, those RMRR + are considered to be relaxable and safe. diff --git a/Documentation/ABI/testing/sysfs-kernel-vmcoreinfo b/Documentation/ABI/testing/sysfs-kernel-vmcoreinfo index 7bd81168e063..1f1087a5f075 100644 --- a/Documentation/ABI/testing/sysfs-kernel-vmcoreinfo +++ b/Documentation/ABI/testing/sysfs-kernel-vmcoreinfo @@ -4,7 +4,7 @@ KernelVersion: 2.6.24 Contact: Ken'ichi Ohmichi <oomichi@mxs.nes.nec.co.jp> Kexec Mailing List <kexec@lists.infradead.org> Vivek Goyal <vgoyal@redhat.com> -Description +Description: Shows physical address and size of vmcoreinfo ELF note. First value contains physical address of note in hex and second value contains the size of note in hex. This ELF diff --git a/Documentation/ABI/testing/sysfs-platform-asus-laptop b/Documentation/ABI/testing/sysfs-platform-asus-laptop index cd9d667c3da2..8b0e8205a6a2 100644 --- a/Documentation/ABI/testing/sysfs-platform-asus-laptop +++ b/Documentation/ABI/testing/sysfs-platform-asus-laptop @@ -31,7 +31,7 @@ Description: To control the LED display, use the following : echo 0x0T000DDD > /sys/devices/platform/asus_laptop/ where T control the 3 letters display, and DDD the 3 digits display. - The DDD table can be found in Documentation/laptops/asus-laptop.txt + The DDD table can be found in Documentation/admin-guide/laptops/asus-laptop.rst What: /sys/devices/platform/asus_laptop/bluetooth Date: January 2007 diff --git a/Documentation/ABI/testing/sysfs-platform-asus-wmi b/Documentation/ABI/testing/sysfs-platform-asus-wmi index 019e1e29370e..9e99f2909612 100644 --- a/Documentation/ABI/testing/sysfs-platform-asus-wmi +++ b/Documentation/ABI/testing/sysfs-platform-asus-wmi @@ -36,3 +36,13 @@ KernelVersion: 3.5 Contact: "AceLan Kao" <acelan.kao@canonical.com> Description: Resume on lid open. 1 means on, 0 means off. + +What: /sys/devices/platform/<platform>/fan_boost_mode +Date: Sep 2019 +KernelVersion: 5.3 +Contact: "Yurii Pavlovskyi" <yurii.pavlovskyi@gmail.com> +Description: + Fan boost mode: + * 0 - normal, + * 1 - overboost, + * 2 - silent diff --git a/Documentation/ABI/testing/sysfs-platform-i2c-demux-pinctrl b/Documentation/ABI/testing/sysfs-platform-i2c-demux-pinctrl index 3c3514815cd5..c394b808be19 100644 --- a/Documentation/ABI/testing/sysfs-platform-i2c-demux-pinctrl +++ b/Documentation/ABI/testing/sysfs-platform-i2c-demux-pinctrl @@ -1,7 +1,7 @@ What: /sys/devices/platform/<i2c-demux-name>/available_masters Date: January 2016 KernelVersion: 4.6 -Contact: Wolfram Sang <wsa@the-dreams.de> +Contact: Wolfram Sang <wsa+renesas@sang-engineering.com> Description: Reading the file will give you a list of masters which can be selected for a demultiplexed bus. The format is @@ -12,7 +12,7 @@ Description: What: /sys/devices/platform/<i2c-demux-name>/current_master Date: January 2016 KernelVersion: 4.6 -Contact: Wolfram Sang <wsa@the-dreams.de> +Contact: Wolfram Sang <wsa+renesas@sang-engineering.com> Description: This file selects/shows the active I2C master for a demultiplexed bus. It uses the <index> value from the file 'available_masters'. diff --git a/Documentation/ABI/testing/sysfs-platform-wilco-ec b/Documentation/ABI/testing/sysfs-platform-wilco-ec new file mode 100644 index 000000000000..8827a734f933 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-wilco-ec @@ -0,0 +1,40 @@ +What: /sys/bus/platform/devices/GOOG000C\:00/boot_on_ac +Date: April 2019 +KernelVersion: 5.3 +Description: + Boot on AC is a policy which makes the device boot from S5 + when AC power is connected. This is useful for users who + want to run their device headless or with a dock. + + Input should be parseable by kstrtou8() to 0 or 1. + +What: /sys/bus/platform/devices/GOOG000C\:00/build_date +Date: May 2019 +KernelVersion: 5.3 +Description: + Display Wilco Embedded Controller firmware build date. + Output will a MM/DD/YY string. + +What: /sys/bus/platform/devices/GOOG000C\:00/build_revision +Date: May 2019 +KernelVersion: 5.3 +Description: + Display Wilco Embedded Controller build revision. + Output will a version string be similar to the example below: + d2592cae0 + +What: /sys/bus/platform/devices/GOOG000C\:00/model_number +Date: May 2019 +KernelVersion: 5.3 +Description: + Display Wilco Embedded Controller model number. + Output will a version string be similar to the example below: + 08B6 + +What: /sys/bus/platform/devices/GOOG000C\:00/version +Date: May 2019 +KernelVersion: 5.3 +Description: + Display Wilco Embedded Controller firmware version. + The format of the string is x.y.z. Where x is major, y is minor + and z is the build number. For example: 95.00.06 diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power index 18b7dc929234..3c5130355011 100644 --- a/Documentation/ABI/testing/sysfs-power +++ b/Documentation/ABI/testing/sysfs-power @@ -300,4 +300,4 @@ Description: attempt. Using this sysfs file will override any values that were - set using the kernel command line for disk offset.
\ No newline at end of file + set using the kernel command line for disk offset. |