summaryrefslogtreecommitdiff
path: root/Documentation/ABI
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/ABI')
-rw-r--r--Documentation/ABI/stable/sysfs-bus-nvmem19
-rw-r--r--Documentation/ABI/stable/sysfs-driver-dma-ioatdma30
-rw-r--r--Documentation/ABI/testing/configfs-usb-gadget-rndis3
-rw-r--r--Documentation/ABI/testing/ppc-memtrace45
-rw-r--r--Documentation/ABI/testing/procfs-smaps_rollup31
-rw-r--r--Documentation/ABI/testing/sysfs-block-zram8
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio9
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm3257
-rw-r--r--Documentation/ABI/testing/sysfs-bus-thunderbolt2
-rw-r--r--Documentation/ABI/testing/sysfs-bus-usb-lvstest13
-rw-r--r--Documentation/ABI/testing/sysfs-driver-altera-cvp8
-rw-r--r--Documentation/ABI/testing/sysfs-firmware-opal-powercap31
-rw-r--r--Documentation/ABI/testing/sysfs-firmware-opal-psr18
-rw-r--r--Documentation/ABI/testing/sysfs-kernel-mm-swap26
-rw-r--r--Documentation/ABI/testing/sysfs-power12
15 files changed, 312 insertions, 0 deletions
diff --git a/Documentation/ABI/stable/sysfs-bus-nvmem b/Documentation/ABI/stable/sysfs-bus-nvmem
new file mode 100644
index 000000000000..5923ab4620c5
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-bus-nvmem
@@ -0,0 +1,19 @@
+What: /sys/bus/nvmem/devices/.../nvmem
+Date: July 2015
+KernelVersion: 4.2
+Contact: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+Description:
+ This file allows user to read/write the raw NVMEM contents.
+ Permissions for write to this file depends on the nvmem
+ provider configuration.
+
+ ex:
+ hexdump /sys/bus/nvmem/devices/qfprom0/nvmem
+
+ 0000000 0000 0000 0000 0000 0000 0000 0000 0000
+ *
+ 00000a0 db10 2240 0000 e000 0c00 0c00 0000 0c00
+ 0000000 0000 0000 0000 0000 0000 0000 0000 0000
+ ...
+ *
+ 0001000
diff --git a/Documentation/ABI/stable/sysfs-driver-dma-ioatdma b/Documentation/ABI/stable/sysfs-driver-dma-ioatdma
new file mode 100644
index 000000000000..420c1d09e42f
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-dma-ioatdma
@@ -0,0 +1,30 @@
+What: sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/cap
+Date: December 3, 2009
+KernelVersion: 2.6.32
+Contact: dmaengine@vger.kernel.org
+Description: Capabilities the DMA supports.Currently there are DMA_PQ, DMA_PQ_VAL,
+ DMA_XOR,DMA_XOR_VAL,DMA_INTERRUPT.
+
+What: sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/ring_active
+Date: December 3, 2009
+KernelVersion: 2.6.32
+Contact: dmaengine@vger.kernel.org
+Description: The number of descriptors active in the ring.
+
+What: sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/ring_size
+Date: December 3, 2009
+KernelVersion: 2.6.32
+Contact: dmaengine@vger.kernel.org
+Description: Descriptor ring size, total number of descriptors available.
+
+What: sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/version
+Date: December 3, 2009
+KernelVersion: 2.6.32
+Contact: dmaengine@vger.kernel.org
+Description: Version of ioatdma device.
+
+What: sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/intr_coalesce
+Date: August 8, 2017
+KernelVersion: 4.14
+Contact: dmaengine@vger.kernel.org
+Description: Tune-able interrupt delay value per channel basis.
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-rndis b/Documentation/ABI/testing/configfs-usb-gadget-rndis
index e32879b84b4d..137399095d74 100644
--- a/Documentation/ABI/testing/configfs-usb-gadget-rndis
+++ b/Documentation/ABI/testing/configfs-usb-gadget-rndis
@@ -12,3 +12,6 @@ Description:
Ethernet over USB link
dev_addr - MAC address of device's end of this
Ethernet over USB link
+ class - USB interface class, default is 02 (hex)
+ subclass - USB interface subclass, default is 06 (hex)
+ protocol - USB interface protocol, default is 00 (hex)
diff --git a/Documentation/ABI/testing/ppc-memtrace b/Documentation/ABI/testing/ppc-memtrace
new file mode 100644
index 000000000000..2e8b93741270
--- /dev/null
+++ b/Documentation/ABI/testing/ppc-memtrace
@@ -0,0 +1,45 @@
+What: /sys/kernel/debug/powerpc/memtrace
+Date: Aug 2017
+KernelVersion: 4.14
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: This folder contains the relevant debugfs files for the
+ hardware trace macro to use. CONFIG_PPC64_HARDWARE_TRACING
+ must be set.
+
+What: /sys/kernel/debug/powerpc/memtrace/enable
+Date: Aug 2017
+KernelVersion: 4.14
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: Write an integer containing the size in bytes of the memory
+ you want removed from each NUMA node to this file - it must be
+ aligned to the memblock size. This amount of RAM will be removed
+ from the kernel mappings and the following debugfs files will be
+ created. This can only be successfully done once per boot. Once
+ memory is successfully removed from each node, the following
+ files are created.
+
+What: /sys/kernel/debug/powerpc/memtrace/<node-id>
+Date: Aug 2017
+KernelVersion: 4.14
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: This directory contains information about the removed memory
+ from the specific NUMA node.
+
+What: /sys/kernel/debug/powerpc/memtrace/<node-id>/size
+Date: Aug 2017
+KernelVersion: 4.14
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: This contains the size of the memory removed from the node.
+
+What: /sys/kernel/debug/powerpc/memtrace/<node-id>/start
+Date: Aug 2017
+KernelVersion: 4.14
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: This contains the start address of the removed memory.
+
+What: /sys/kernel/debug/powerpc/memtrace/<node-id>/trace
+Date: Aug 2017
+KernelVersion: 4.14
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: This is where the hardware trace macro will output the trace
+ it generates.
diff --git a/Documentation/ABI/testing/procfs-smaps_rollup b/Documentation/ABI/testing/procfs-smaps_rollup
new file mode 100644
index 000000000000..0a54ed0d63c9
--- /dev/null
+++ b/Documentation/ABI/testing/procfs-smaps_rollup
@@ -0,0 +1,31 @@
+What: /proc/pid/smaps_rollup
+Date: August 2017
+Contact: Daniel Colascione <dancol@google.com>
+Description:
+ This file provides pre-summed memory information for a
+ process. The format is identical to /proc/pid/smaps,
+ except instead of an entry for each VMA in a process,
+ smaps_rollup has a single entry (tagged "[rollup]")
+ for which each field is the sum of the corresponding
+ fields from all the maps in /proc/pid/smaps.
+ For more details, see the procfs man page.
+
+ Typical output looks like this:
+
+ 00100000-ff709000 ---p 00000000 00:00 0 [rollup]
+ Rss: 884 kB
+ Pss: 385 kB
+ Shared_Clean: 696 kB
+ Shared_Dirty: 0 kB
+ Private_Clean: 120 kB
+ Private_Dirty: 68 kB
+ Referenced: 884 kB
+ Anonymous: 68 kB
+ LazyFree: 0 kB
+ AnonHugePages: 0 kB
+ ShmemPmdMapped: 0 kB
+ Shared_Hugetlb: 0 kB
+ Private_Hugetlb: 0 kB
+ Swap: 0 kB
+ SwapPss: 0 kB
+ Locked: 385 kB
diff --git a/Documentation/ABI/testing/sysfs-block-zram b/Documentation/ABI/testing/sysfs-block-zram
index 451b6d882b2c..c1513c756af1 100644
--- a/Documentation/ABI/testing/sysfs-block-zram
+++ b/Documentation/ABI/testing/sysfs-block-zram
@@ -90,3 +90,11 @@ Description:
device's debugging info useful for kernel developers. Its
format is not documented intentionally and may change
anytime without any notice.
+
+What: /sys/block/zram<id>/backing_dev
+Date: June 2017
+Contact: Minchan Kim <minchan@kernel.org>
+Description:
+ The backing_dev file is read-write and set up backing
+ device for zram to write incompressible pages.
+ For using, user should enable CONFIG_ZRAM_WRITEBACK.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 2db2cdf42d54..7eead5f97e02 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -119,6 +119,15 @@ Description:
unique to allow association with event codes. Units after
application of scale and offset are milliamps.
+What: /sys/bus/iio/devices/iio:deviceX/in_powerY_raw
+KernelVersion: 4.5
+Contact: linux-iio@vger.kernel.org
+Description:
+ Raw (unscaled no bias removal etc.) power measurement from
+ channel Y. The number must always be specified and
+ unique to allow association with event codes. Units after
+ application of scale and offset are milliwatts.
+
What: /sys/bus/iio/devices/iio:deviceX/in_capacitanceY_raw
KernelVersion: 3.2
Contact: linux-iio@vger.kernel.org
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32
new file mode 100644
index 000000000000..ad2cc63e4bf8
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32
@@ -0,0 +1,57 @@
+What: /sys/bus/iio/devices/iio:deviceX/in_count0_preset
+KernelVersion: 4.13
+Contact: fabrice.gasnier@st.com
+Description:
+ Reading returns the current preset value. Writing sets the
+ preset value. Encoder counts continuously from 0 to preset
+ value, depending on direction (up/down).
+
+What: /sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
+KernelVersion: 4.13
+Contact: fabrice.gasnier@st.com
+Description:
+ Reading returns the list possible quadrature modes.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_count0_quadrature_mode
+KernelVersion: 4.13
+Contact: fabrice.gasnier@st.com
+Description:
+ Configure the device counter quadrature modes:
+ - non-quadrature:
+ Encoder IN1 input servers as the count input (up
+ direction).
+ - quadrature:
+ Encoder IN1 and IN2 inputs are mixed to get direction
+ and count.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_count_polarity_available
+KernelVersion: 4.13
+Contact: fabrice.gasnier@st.com
+Description:
+ Reading returns the list possible active edges.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_count0_polarity
+KernelVersion: 4.13
+Contact: fabrice.gasnier@st.com
+Description:
+ Configure the device encoder/counter active edge:
+ - rising-edge
+ - falling-edge
+ - both-edges
+
+ In non-quadrature mode, device counts up on active edge.
+ In quadrature mode, encoder counting scenarios are as follows:
+ ----------------------------------------------------------------
+ | Active | Level on | IN1 signal | IN2 signal |
+ | edge | opposite |------------------------------------------
+ | | signal | Rising | Falling | Rising | Falling |
+ ----------------------------------------------------------------
+ | Rising | High -> | Down | - | Up | - |
+ | edge | Low -> | Up | - | Down | - |
+ ----------------------------------------------------------------
+ | Falling | High -> | - | Up | - | Down |
+ | edge | Low -> | - | Down | - | Up |
+ ----------------------------------------------------------------
+ | Both | High -> | Down | Up | Up | Down |
+ | edges | Low -> | Up | Down | Down | Up |
+ ----------------------------------------------------------------
diff --git a/Documentation/ABI/testing/sysfs-bus-thunderbolt b/Documentation/ABI/testing/sysfs-bus-thunderbolt
index 2a98149943ea..392bef5bd399 100644
--- a/Documentation/ABI/testing/sysfs-bus-thunderbolt
+++ b/Documentation/ABI/testing/sysfs-bus-thunderbolt
@@ -45,6 +45,8 @@ Contact: thunderbolt-software@lists.01.org
Description: When a devices supports Thunderbolt secure connect it will
have this attribute. Writing 32 byte hex string changes
authorization to use the secure connection method instead.
+ Writing an empty string clears the key and regular connection
+ method can be used again.
What: /sys/bus/thunderbolt/devices/.../device
Date: Sep 2017
diff --git a/Documentation/ABI/testing/sysfs-bus-usb-lvstest b/Documentation/ABI/testing/sysfs-bus-usb-lvstest
index 5151290cf8e7..ee0046dc4192 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb-lvstest
+++ b/Documentation/ABI/testing/sysfs-bus-usb-lvstest
@@ -45,3 +45,16 @@ Contact: Pratyush Anand <pratyush.anand@gmail.com>
Description:
Write to this node to issue "U3 exit" for Link Layer
Validation device. It is needed for TD.7.36.
+
+What: /sys/bus/usb/devices/.../enable_compliance
+Date: July 2017
+Description:
+ Write to this node to set the port to compliance mode to test
+ with Link Layer Validation device. It is needed for TD.7.34.
+
+What: /sys/bus/usb/devices/.../warm_reset
+Date: July 2017
+Description:
+ Write to this node to issue "Warm Reset" for Link Layer Validation
+ device. It may be needed to properly reset an xHCI 1.1 host port if
+ compliance mode needed to be explicitly enabled.
diff --git a/Documentation/ABI/testing/sysfs-driver-altera-cvp b/Documentation/ABI/testing/sysfs-driver-altera-cvp
new file mode 100644
index 000000000000..8cde64a71edb
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-altera-cvp
@@ -0,0 +1,8 @@
+What: /sys/bus/pci/drivers/altera-cvp/chkcfg
+Date: May 2017
+Kernel Version: 4.13
+Contact: Anatolij Gustschin <agust@denx.de>
+Description:
+ Contains either 1 or 0 and controls if configuration
+ error checking in altera-cvp driver is turned on or
+ off.
diff --git a/Documentation/ABI/testing/sysfs-firmware-opal-powercap b/Documentation/ABI/testing/sysfs-firmware-opal-powercap
new file mode 100644
index 000000000000..c9b66ec4f165
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-firmware-opal-powercap
@@ -0,0 +1,31 @@
+What: /sys/firmware/opal/powercap
+Date: August 2017
+Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Description: Powercap directory for Powernv (P8, P9) servers
+
+ Each folder in this directory contains a
+ power-cappable component.
+
+What: /sys/firmware/opal/powercap/system-powercap
+ /sys/firmware/opal/powercap/system-powercap/powercap-min
+ /sys/firmware/opal/powercap/system-powercap/powercap-max
+ /sys/firmware/opal/powercap/system-powercap/powercap-current
+Date: August 2017
+Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Description: System powercap directory and attributes applicable for
+ Powernv (P8, P9) servers
+
+ This directory provides powercap information. It
+ contains below sysfs attributes:
+
+ - powercap-min : This file provides the minimum
+ possible powercap in Watt units
+
+ - powercap-max : This file provides the maximum
+ possible powercap in Watt units
+
+ - powercap-current : This file provides the current
+ powercap set on the system. Writing to this file
+ creates a request for setting a new-powercap. The
+ powercap requested must be between powercap-min
+ and powercap-max.
diff --git a/Documentation/ABI/testing/sysfs-firmware-opal-psr b/Documentation/ABI/testing/sysfs-firmware-opal-psr
new file mode 100644
index 000000000000..cc2ece70e365
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-firmware-opal-psr
@@ -0,0 +1,18 @@
+What: /sys/firmware/opal/psr
+Date: August 2017
+Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Description: Power-Shift-Ratio directory for Powernv P9 servers
+
+ Power-Shift-Ratio allows to provide hints the firmware
+ to shift/throttle power between different entities in
+ the system. Each attribute in this directory indicates
+ a settable PSR.
+
+What: /sys/firmware/opal/psr/cpu_to_gpu_X
+Date: August 2017
+Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Description: PSR sysfs attributes for Powernv P9 servers
+
+ Power-Shift-Ratio between CPU and GPU for a given chip
+ with chip-id X. This file gives the ratio (0-100)
+ which is used by OCC for power-capping.
diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-swap b/Documentation/ABI/testing/sysfs-kernel-mm-swap
new file mode 100644
index 000000000000..587db52084c7
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-kernel-mm-swap
@@ -0,0 +1,26 @@
+What: /sys/kernel/mm/swap/
+Date: August 2017
+Contact: Linux memory management mailing list <linux-mm@kvack.org>
+Description: Interface for swapping
+
+What: /sys/kernel/mm/swap/vma_ra_enabled
+Date: August 2017
+Contact: Linux memory management mailing list <linux-mm@kvack.org>
+Description: Enable/disable VMA based swap readahead.
+
+ If set to true, the VMA based swap readahead algorithm
+ will be used for swappable anonymous pages mapped in a
+ VMA, and the global swap readahead algorithm will be
+ still used for tmpfs etc. other users. If set to
+ false, the global swap readahead algorithm will be
+ used for all swappable pages.
+
+What: /sys/kernel/mm/swap/vma_ra_max_order
+Date: August 2017
+Contact: Linux memory management mailing list <linux-mm@kvack.org>
+Description: The max readahead size in order for VMA based swap readahead
+
+ VMA based swap readahead algorithm will readahead at
+ most 1 << max_order pages for each readahead. The
+ real readahead size for each readahead will be scaled
+ according to the estimation algorithm.
diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power
index f523e5a3ac33..713cab1d5f12 100644
--- a/Documentation/ABI/testing/sysfs-power
+++ b/Documentation/ABI/testing/sysfs-power
@@ -273,3 +273,15 @@ Description:
This output is useful for system wakeup diagnostics of spurious
wakeup interrupts.
+
+What: /sys/power/pm_debug_messages
+Date: July 2017
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+ The /sys/power/pm_debug_messages file controls the printing
+ of debug messages from the system suspend/hiberbation
+ infrastructure to the kernel log.
+
+ Writing a "1" to this file enables the debug messages and
+ writing a "0" (default) to it disables them. Reads from
+ this file return the current value.
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-04 03:31:45 +0300