diff options
Diffstat (limited to 'Documentation/ABI/testing/sysfs-bus-iio')
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-iio | 140 |
1 files changed, 140 insertions, 0 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index d957f5da5c04..affd4ce871d7 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -33,6 +33,52 @@ Description: Description of the physical chip / device for device X. Typically a part number. +What: /sys/bus/iio/devices/iio:deviceX/label +KernelVersion: 5.8 +Contact: linux-iio@vger.kernel.org +Description: + Optional symbolic label for a device. + This is useful for userspace to be able to better identify an + individual device. + + The contents of the label are free-form, but there are some + standardized uses: + + For proximity sensors which give the proximity (of a person) to + a certain wlan or wwan antenna the following standardized labels + are used: + + * "proximity-wifi" + * "proximity-lte" + * "proximity-wifi-lte" + * "proximity-wifi-left" + * "proximity-wifi-right" + + These are used to indicate to userspace that these proximity + sensors may be used to tune transmit power to ensure that + Specific Absorption Rate (SAR) limits are honored. + The "-left" and "-right" labels are for devices with multiple + antennas. + + In some laptops/tablets the standardized proximity sensor labels + instead indicate proximity to a specific part of the device: + + * "proximity-palmrest" indicates proximity to the keyboard's palmrest + * "proximity-palmrest-left" indicates proximity to the left part of the palmrest + * "proximity-palmrest-right" indicates proximity to the right part of the palmrest + * "proximity-lap" indicates the device is being used on someone's lap + + Note "proximity-lap" is special in that its value may be + calculated by firmware from other sensor readings, rather then + being a raw sensor reading. + + For accelerometers used in 2-in-1s with 360° (yoga-style) hinges, + which have an accelerometer in both their base and their display, + the following standardized labels are used: + + * "accel-base" + * "accel-display" + What: /sys/bus/iio/devices/iio:deviceX/current_timestamp_clock KernelVersion: 4.5 Contact: linux-iio@vger.kernel.org @@ -1118,12 +1164,16 @@ Description: What: /sys/bus/iio/devices/iio:deviceX/buffer/length KernelVersion: 2.6.35 +What: /sys/bus/iio/devices/iio:deviceX/bufferY/length +KernelVersion: 5.11 Contact: linux-iio@vger.kernel.org Description: Number of scans contained by the buffer. What: /sys/bus/iio/devices/iio:deviceX/buffer/enable KernelVersion: 2.6.35 +What: /sys/bus/iio/devices/iio:deviceX/bufferY/enable +KernelVersion: 5.11 Contact: linux-iio@vger.kernel.org Description: Actually start the buffer capture up. Will start trigger @@ -1131,11 +1181,16 @@ Description: What: /sys/bus/iio/devices/iio:deviceX/scan_elements KernelVersion: 2.6.37 +What: /sys/bus/iio/devices/iio:deviceX/bufferY +KernelVersion: 5.11 Contact: linux-iio@vger.kernel.org Description: Directory containing interfaces for elements that will be captured for a single triggered sample set in the buffer. + Since kernel 5.11 the scan_elements attributes are merged into + the bufferY directory, to be configurable per buffer. + What: /sys/.../iio:deviceX/scan_elements/in_accel_x_en What: /sys/.../iio:deviceX/scan_elements/in_accel_y_en What: /sys/.../iio:deviceX/scan_elements/in_accel_z_en @@ -1164,6 +1219,34 @@ What: /sys/.../iio:deviceX/scan_elements/in_pressure_en What: /sys/.../iio:deviceX/scan_elements/in_rot_quaternion_en What: /sys/.../iio:deviceX/scan_elements/in_proximity_en KernelVersion: 2.6.37 +What: /sys/.../iio:deviceX/bufferY/in_accel_x_en +What: /sys/.../iio:deviceX/bufferY/in_accel_y_en +What: /sys/.../iio:deviceX/bufferY/in_accel_z_en +What: /sys/.../iio:deviceX/bufferY/in_anglvel_x_en +What: /sys/.../iio:deviceX/bufferY/in_anglvel_y_en +What: /sys/.../iio:deviceX/bufferY/in_anglvel_z_en +What: /sys/.../iio:deviceX/bufferY/in_magn_x_en +What: /sys/.../iio:deviceX/bufferY/in_magn_y_en +What: /sys/.../iio:deviceX/bufferY/in_magn_z_en +What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_magnetic_en +What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_true_en +What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_magnetic_tilt_comp_en +What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_true_tilt_comp_en +What: /sys/.../iio:deviceX/bufferY/in_timestamp_en +What: /sys/.../iio:deviceX/bufferY/in_voltageY_supply_en +What: /sys/.../iio:deviceX/bufferY/in_voltageY_en +What: /sys/.../iio:deviceX/bufferY/in_voltageY-voltageZ_en +What: /sys/.../iio:deviceX/bufferY/in_voltageY_i_en +What: /sys/.../iio:deviceX/bufferY/in_voltageY_q_en +What: /sys/.../iio:deviceX/bufferY/in_voltage_i_en +What: /sys/.../iio:deviceX/bufferY/in_voltage_q_en +What: /sys/.../iio:deviceX/bufferY/in_incli_x_en +What: /sys/.../iio:deviceX/bufferY/in_incli_y_en +What: /sys/.../iio:deviceX/bufferY/in_pressureY_en +What: /sys/.../iio:deviceX/bufferY/in_pressure_en +What: /sys/.../iio:deviceX/bufferY/in_rot_quaternion_en +What: /sys/.../iio:deviceX/bufferY/in_proximity_en +KernelVersion: 5.11 Contact: linux-iio@vger.kernel.org Description: Scan element control for triggered data capture. @@ -1185,6 +1268,23 @@ What: /sys/.../iio:deviceX/scan_elements/in_pressure_type What: /sys/.../iio:deviceX/scan_elements/in_rot_quaternion_type What: /sys/.../iio:deviceX/scan_elements/in_proximity_type KernelVersion: 2.6.37 +What: /sys/.../iio:deviceX/bufferY/in_accel_type +What: /sys/.../iio:deviceX/bufferY/in_anglvel_type +What: /sys/.../iio:deviceX/bufferY/in_magn_type +What: /sys/.../iio:deviceX/bufferY/in_incli_type +What: /sys/.../iio:deviceX/bufferY/in_voltageY_type +What: /sys/.../iio:deviceX/bufferY/in_voltage_type +What: /sys/.../iio:deviceX/bufferY/in_voltageY_supply_type +What: /sys/.../iio:deviceX/bufferY/in_voltageY_i_type +What: /sys/.../iio:deviceX/bufferY/in_voltageY_q_type +What: /sys/.../iio:deviceX/bufferY/in_voltage_i_type +What: /sys/.../iio:deviceX/bufferY/in_voltage_q_type +What: /sys/.../iio:deviceX/bufferY/in_timestamp_type +What: /sys/.../iio:deviceX/bufferY/in_pressureY_type +What: /sys/.../iio:deviceX/bufferY/in_pressure_type +What: /sys/.../iio:deviceX/bufferY/in_rot_quaternion_type +What: /sys/.../iio:deviceX/bufferY/in_proximity_type +KernelVersion: 5.11 Contact: linux-iio@vger.kernel.org Description: Description of the scan element data storage within the buffer @@ -1241,6 +1341,33 @@ What: /sys/.../iio:deviceX/scan_elements/in_pressure_index What: /sys/.../iio:deviceX/scan_elements/in_rot_quaternion_index What: /sys/.../iio:deviceX/scan_elements/in_proximity_index KernelVersion: 2.6.37 +What: /sys/.../iio:deviceX/bufferY/in_voltageY_index +What: /sys/.../iio:deviceX/bufferY/in_voltageY_supply_index +What: /sys/.../iio:deviceX/bufferY/in_voltageY_i_index +What: /sys/.../iio:deviceX/bufferY/in_voltageY_q_index +What: /sys/.../iio:deviceX/bufferY/in_voltage_i_index +What: /sys/.../iio:deviceX/bufferY/in_voltage_q_index +What: /sys/.../iio:deviceX/bufferY/in_accel_x_index +What: /sys/.../iio:deviceX/bufferY/in_accel_y_index +What: /sys/.../iio:deviceX/bufferY/in_accel_z_index +What: /sys/.../iio:deviceX/bufferY/in_anglvel_x_index +What: /sys/.../iio:deviceX/bufferY/in_anglvel_y_index +What: /sys/.../iio:deviceX/bufferY/in_anglvel_z_index +What: /sys/.../iio:deviceX/bufferY/in_magn_x_index +What: /sys/.../iio:deviceX/bufferY/in_magn_y_index +What: /sys/.../iio:deviceX/bufferY/in_magn_z_index +What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_magnetic_index +What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_true_index +What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_magnetic_tilt_comp_index +What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_true_tilt_comp_index +What: /sys/.../iio:deviceX/bufferY/in_incli_x_index +What: /sys/.../iio:deviceX/bufferY/in_incli_y_index +What: /sys/.../iio:deviceX/bufferY/in_timestamp_index +What: /sys/.../iio:deviceX/bufferY/in_pressureY_index +What: /sys/.../iio:deviceX/bufferY/in_pressure_index +What: /sys/.../iio:deviceX/bufferY/in_rot_quaternion_index +What: /sys/.../iio:deviceX/bufferY/in_proximity_index +KernelVersion: 5.11 Contact: linux-iio@vger.kernel.org Description: A single positive integer specifying the position of this @@ -1455,6 +1582,8 @@ Description: What: /sys/bus/iio/devices/iio:deviceX/buffer/watermark KernelVersion: 4.2 +What: /sys/bus/iio/devices/iio:deviceX/bufferY/watermark +KernelVersion: 5.11 Contact: linux-iio@vger.kernel.org Description: A single positive integer specifying the maximum number of scan @@ -1473,6 +1602,8 @@ Description: What: /sys/bus/iio/devices/iio:deviceX/buffer/data_available KernelVersion: 4.16 +What: /sys/bus/iio/devices/iio:deviceX/bufferY/data_available +KernelVersion: 5.11 Contact: linux-iio@vger.kernel.org Description: A read-only value indicating the bytes of data available in the @@ -1823,3 +1954,12 @@ Description: hinge, keyboard, screen. It means the three channels each correspond respectively to hinge angle, keyboard angle, and screen angle. + +What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_hysteresis_relative +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_hysteresis_relative +KernelVersion: 5.12 +Contact: linux-iio@vger.kernel.org +Description: + Specify the percent for light sensor relative to the channel + absolute value that a data field should change before an event + is generated. Units are a percentage of the prior reading. |