summaryrefslogtreecommitdiff
path: root/Documentation/ABI/testing/debugfs-driver-qat_telemetry
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/ABI/testing/debugfs-driver-qat_telemetry')
-rw-r--r--Documentation/ABI/testing/debugfs-driver-qat_telemetry228
1 files changed, 228 insertions, 0 deletions
diff --git a/Documentation/ABI/testing/debugfs-driver-qat_telemetry b/Documentation/ABI/testing/debugfs-driver-qat_telemetry
new file mode 100644
index 000000000000..eacee2072088
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-driver-qat_telemetry
@@ -0,0 +1,228 @@
+What: /sys/kernel/debug/qat_<device>_<BDF>/telemetry/control
+Date: March 2024
+KernelVersion: 6.8
+Contact: qat-linux@intel.com
+Description: (RW) Enables/disables the reporting of telemetry metrics.
+
+ Allowed values to write:
+ ========================
+ * 0: disable telemetry
+ * 1: enable telemetry
+ * 2, 3, 4: enable telemetry and calculate minimum, maximum
+ and average for each counter over 2, 3 or 4 samples
+
+ Returned values:
+ ================
+ * 1-4: telemetry is enabled and running
+ * 0: telemetry is disabled
+
+ Example.
+
+ Writing '3' to this file starts the collection of
+ telemetry metrics. Samples are collected every second and
+ stored in a circular buffer of size 3. These values are then
+ used to calculate the minimum, maximum and average for each
+ counter. After enabling, counters can be retrieved through
+ the ``device_data`` file::
+
+ echo 3 > /sys/kernel/debug/qat_4xxx_0000:6b:00.0/telemetry/control
+
+ Writing '0' to this file stops the collection of telemetry
+ metrics::
+
+ echo 0 > /sys/kernel/debug/qat_4xxx_0000:6b:00.0/telemetry/control
+
+ This attribute is only available for qat_4xxx devices.
+
+What: /sys/kernel/debug/qat_<device>_<BDF>/telemetry/device_data
+Date: March 2024
+KernelVersion: 6.8
+Contact: qat-linux@intel.com
+Description: (RO) Reports device telemetry counters.
+ Reads report metrics about performance and utilization of
+ a QAT device:
+
+ ======================= ========================================
+ Field Description
+ ======================= ========================================
+ sample_cnt number of acquisitions of telemetry data
+ from the device. Reads are performed
+ every 1000 ms.
+ pci_trans_cnt number of PCIe partial transactions
+ max_rd_lat maximum logged read latency [ns] (could
+ be any read operation)
+ rd_lat_acc_avg average read latency [ns]
+ max_gp_lat max get to put latency [ns] (only takes
+ samples for AE0)
+ gp_lat_acc_avg average get to put latency [ns]
+ bw_in PCIe, write bandwidth [Mbps]
+ bw_out PCIe, read bandwidth [Mbps]
+ at_page_req_lat_avg Address Translator(AT), average page
+ request latency [ns]
+ at_trans_lat_avg AT, average page translation latency [ns]
+ at_max_tlb_used AT, maximum uTLB used
+ util_cpr<N> utilization of Compression slice N [%]
+ exec_cpr<N> execution count of Compression slice N
+ util_xlt<N> utilization of Translator slice N [%]
+ exec_xlt<N> execution count of Translator slice N
+ util_dcpr<N> utilization of Decompression slice N [%]
+ exec_dcpr<N> execution count of Decompression slice N
+ util_pke<N> utilization of PKE N [%]
+ exec_pke<N> execution count of PKE N
+ util_ucs<N> utilization of UCS slice N [%]
+ exec_ucs<N> execution count of UCS slice N
+ util_wat<N> utilization of Wireless Authentication
+ slice N [%]
+ exec_wat<N> execution count of Wireless Authentication
+ slice N
+ util_wcp<N> utilization of Wireless Cipher slice N [%]
+ exec_wcp<N> execution count of Wireless Cipher slice N
+ util_cph<N> utilization of Cipher slice N [%]
+ exec_cph<N> execution count of Cipher slice N
+ util_ath<N> utilization of Authentication slice N [%]
+ exec_ath<N> execution count of Authentication slice N
+ ======================= ========================================
+
+ The telemetry report file can be read with the following command::
+
+ cat /sys/kernel/debug/qat_4xxx_0000:6b:00.0/telemetry/device_data
+
+ If ``control`` is set to 1, only the current values of the
+ counters are displayed::
+
+ <counter_name> <current>
+
+ If ``control`` is 2, 3 or 4, counters are displayed in the
+ following format::
+
+ <counter_name> <current> <min> <max> <avg>
+
+ If a device lacks of a specific accelerator, the corresponding
+ attribute is not reported.
+
+ This attribute is only available for qat_4xxx devices.
+
+What: /sys/kernel/debug/qat_<device>_<BDF>/telemetry/rp_<A/B/C/D>_data
+Date: March 2024
+KernelVersion: 6.8
+Contact: qat-linux@intel.com
+Description: (RW) Selects up to 4 Ring Pairs (RP) to monitor, one per file,
+ and report telemetry counters related to each.
+
+ Allowed values to write:
+ ========================
+ * 0 to ``<num_rps - 1>``:
+ Ring pair to be monitored. The value of ``num_rps`` can be
+ retrieved through ``/sys/bus/pci/devices/<BDF>/qat/num_rps``.
+ See Documentation/ABI/testing/sysfs-driver-qat.
+
+ Reads report metrics about performance and utilization of
+ the selected RP:
+
+ ======================= ========================================
+ Field Description
+ ======================= ========================================
+ sample_cnt number of acquisitions of telemetry data
+ from the device. Reads are performed
+ every 1000 ms
+ rp_num RP number associated with slot <A/B/C/D>
+ service_type service associated to the RP
+ pci_trans_cnt number of PCIe partial transactions
+ gp_lat_acc_avg average get to put latency [ns]
+ bw_in PCIe, write bandwidth [Mbps]
+ bw_out PCIe, read bandwidth [Mbps]
+ at_glob_devtlb_hit Message descriptor DevTLB hit rate
+ at_glob_devtlb_miss Message descriptor DevTLB miss rate
+ tl_at_payld_devtlb_hit Payload DevTLB hit rate
+ tl_at_payld_devtlb_miss Payload DevTLB miss rate
+ ======================= ========================================
+
+ Example.
+
+ Writing the value '32' to the file ``rp_C_data`` starts the
+ collection of telemetry metrics for ring pair 32::
+
+ echo 32 > /sys/kernel/debug/qat_4xxx_0000:6b:00.0/telemetry/rp_C_data
+
+ Once a ring pair is selected, statistics can be read accessing
+ the file::
+
+ cat /sys/kernel/debug/qat_4xxx_0000:6b:00.0/telemetry/rp_C_data
+
+ If ``control`` is set to 1, only the current values of the
+ counters are displayed::
+
+ <counter_name> <current>
+
+ If ``control`` is 2, 3 or 4, counters are displayed in the
+ following format::
+
+ <counter_name> <current> <min> <max> <avg>
+
+
+ On QAT GEN4 devices there are 64 RPs on a PF, so the allowed
+ values are 0..63. This number is absolute to the device.
+ If Virtual Functions (VF) are used, the ring pair number can
+ be derived from the Bus, Device, Function of the VF:
+
+ ============ ====== ====== ====== ======
+ PCI BDF/VF RP0 RP1 RP2 RP3
+ ============ ====== ====== ====== ======
+ 0000:6b:0.1 RP 0 RP 1 RP 2 RP 3
+ 0000:6b:0.2 RP 4 RP 5 RP 6 RP 7
+ 0000:6b:0.3 RP 8 RP 9 RP 10 RP 11
+ 0000:6b:0.4 RP 12 RP 13 RP 14 RP 15
+ 0000:6b:0.5 RP 16 RP 17 RP 18 RP 19
+ 0000:6b:0.6 RP 20 RP 21 RP 22 RP 23
+ 0000:6b:0.7 RP 24 RP 25 RP 26 RP 27
+ 0000:6b:1.0 RP 28 RP 29 RP 30 RP 31
+ 0000:6b:1.1 RP 32 RP 33 RP 34 RP 35
+ 0000:6b:1.2 RP 36 RP 37 RP 38 RP 39
+ 0000:6b:1.3 RP 40 RP 41 RP 42 RP 43
+ 0000:6b:1.4 RP 44 RP 45 RP 46 RP 47
+ 0000:6b:1.5 RP 48 RP 49 RP 50 RP 51
+ 0000:6b:1.6 RP 52 RP 53 RP 54 RP 55
+ 0000:6b:1.7 RP 56 RP 57 RP 58 RP 59
+ 0000:6b:2.0 RP 60 RP 61 RP 62 RP 63
+ ============ ====== ====== ====== ======
+
+ The mapping is only valid for the BDFs of VFs on the host.
+
+
+ The service provided on a ring-pair varies depending on the
+ configuration. The configuration for a given device can be
+ queried and set using ``cfg_services``.
+ See Documentation/ABI/testing/sysfs-driver-qat for details.
+
+ The following table reports how ring pairs are mapped to VFs
+ on the PF 0000:6b:0.0 configured for `sym;asym` or `asym;sym`:
+
+ =========== ============ =========== ============ ===========
+ PCI BDF/VF RP0/service RP1/service RP2/service RP3/service
+ =========== ============ =========== ============ ===========
+ 0000:6b:0.1 RP 0 asym RP 1 sym RP 2 asym RP 3 sym
+ 0000:6b:0.2 RP 4 asym RP 5 sym RP 6 asym RP 7 sym
+ 0000:6b:0.3 RP 8 asym RP 9 sym RP10 asym RP11 sym
+ ... ... ... ... ...
+ =========== ============ =========== ============ ===========
+
+ All VFs follow the same pattern.
+
+
+ The following table reports how ring pairs are mapped to VFs on
+ the PF 0000:6b:0.0 configured for `dc`:
+
+ =========== ============ =========== ============ ===========
+ PCI BDF/VF RP0/service RP1/service RP2/service RP3/service
+ =========== ============ =========== ============ ===========
+ 0000:6b:0.1 RP 0 dc RP 1 dc RP 2 dc RP 3 dc
+ 0000:6b:0.2 RP 4 dc RP 5 dc RP 6 dc RP 7 dc
+ 0000:6b:0.3 RP 8 dc RP 9 dc RP10 dc RP11 dc
+ ... ... ... ... ...
+ =========== ============ =========== ============ ===========
+
+ The mapping of a RP to a service can be retrieved using
+ ``rp2srv`` from sysfs.
+ See Documentation/ABI/testing/sysfs-driver-qat for details.
+
+ This attribute is only available for qat_4xxx devices.
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-16 05:23:58 +0300