diff options
| -rw-r--r-- | drivers/gpu/drm/bridge/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/gpu/drm/bridge/Makefile | 1 | ||||
| -rw-r--r-- | drivers/gpu/drm/bridge/sil-sii8620.c | 1565 | ||||
| -rw-r--r-- | drivers/gpu/drm/bridge/sil-sii8620.h | 1517 |
4 files changed, 3090 insertions, 0 deletions
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig index 10e12e74fc9f..bd6acc829f97 100644 --- a/drivers/gpu/drm/bridge/Kconfig +++ b/drivers/gpu/drm/bridge/Kconfig @@ -57,6 +57,13 @@ config DRM_PARADE_PS8622 ---help--- Parade eDP-LVDS bridge chip driver. +config DRM_SIL_SII8620 + tristate "Silicon Image SII8620 HDMI/MHL bridge" + depends on OF + select DRM_KMS_HELPER + help + Silicon Image SII8620 HDMI/MHL bridge chip driver. + config DRM_SII902X tristate "Silicon Image sii902x RGB/HDMI bridge" depends on OF diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile index cdf3a3cf765d..97ed1a5fea9a 100644 --- a/drivers/gpu/drm/bridge/Makefile +++ b/drivers/gpu/drm/bridge/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o +obj-$(CONFIG_DRM_SIL_SII8620) += sil-sii8620.o obj-$(CONFIG_DRM_SII902X) += sii902x.o obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/ diff --git a/drivers/gpu/drm/bridge/sil-sii8620.c b/drivers/gpu/drm/bridge/sil-sii8620.c new file mode 100644 index 000000000000..1345e7cc7bf0 --- /dev/null +++ b/drivers/gpu/drm/bridge/sil-sii8620.c @@ -0,0 +1,1565 @@ +/* + * Silicon Image SiI8620 HDMI/MHL bridge driver + * + * Copyright (C) 2015, Samsung Electronics Co., Ltd. + * Andrzej Hajda <a.hajda@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <drm/bridge/mhl.h> +#include <drm/drm_crtc.h> +#include <drm/drm_edid.h> + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> + +#include "sil-sii8620.h" + +#define VAL_RX_HDMI_CTRL2_DEFVAL VAL_RX_HDMI_CTRL2_IDLE_CNT(3) + +enum sii8620_mode { + CM_DISCONNECTED, + CM_DISCOVERY, + CM_MHL1, + CM_MHL3, + CM_ECBUS_S +}; + +enum sii8620_sink_type { + SINK_NONE, + SINK_HDMI, + SINK_DVI +}; + +enum sii8620_mt_state { + MT_STATE_READY, + MT_STATE_BUSY, + MT_STATE_DONE +}; + +struct sii8620 { + struct drm_bridge bridge; + struct device *dev; + struct clk *clk_xtal; + struct gpio_desc *gpio_reset; + struct gpio_desc *gpio_int; + struct regulator_bulk_data supplies[2]; + struct mutex lock; /* context lock, protects fields below */ + int error; + enum sii8620_mode mode; + enum sii8620_sink_type sink_type; + u8 cbus_status; + u8 stat[MHL_DST_SIZE]; + u8 xstat[MHL_XDS_SIZE]; + u8 devcap[MHL_DCAP_SIZE]; + u8 xdevcap[MHL_XDC_SIZE]; + u8 avif[19]; + struct edid *edid; + unsigned int gen2_write_burst:1; + enum sii8620_mt_state mt_state; + struct list_head mt_queue; +}; + +struct sii8620_mt_msg; + +typedef void (*sii8620_mt_msg_cb)(struct sii8620 *ctx, + struct sii8620_mt_msg *msg); + +struct sii8620_mt_msg { + struct list_head node; + u8 reg[4]; + u8 ret; + sii8620_mt_msg_cb send; + sii8620_mt_msg_cb recv; +}; + +static const u8 sii8620_i2c_page[] = { + 0x39, /* Main System */ + 0x3d, /* TDM and HSIC */ + 0x49, /* TMDS Receiver, MHL EDID */ + 0x4d, /* eMSC, HDCP, HSIC */ + 0x5d, /* MHL Spec */ + 0x64, /* MHL CBUS */ + 0x59, /* Hardware TPI (Transmitter Programming Interface) */ + 0x61, /* eCBUS-S, eCBUS-D */ +}; + +static void sii8620_fetch_edid(struct sii8620 *ctx); +static void sii8620_set_upstream_edid(struct sii8620 *ctx); +static void sii8620_enable_hpd(struct sii8620 *ctx); +static void sii8620_mhl_disconnected(struct sii8620 *ctx); + +static int sii8620_clear_error(struct sii8620 *ctx) +{ + int ret = ctx->error; + + ctx->error = 0; + return ret; +} + +static void sii8620_read_buf(struct sii8620 *ctx, u16 addr, u8 *buf, int len) +{ + struct device *dev = ctx->dev; + struct i2c_client *client = to_i2c_client(dev); + u8 data = addr; + struct i2c_msg msg[] = { + { + .addr = sii8620_i2c_page[addr >> 8], + .flags = client->flags, + .len = 1, + .buf = &data + }, + { + .addr = sii8620_i2c_page[addr >> 8], + .flags = client->flags | I2C_M_RD, + .len = len, + .buf = buf + }, + }; + int ret; + + if (ctx->error) + return; + + ret = i2c_transfer(client->adapter, msg, 2); + dev_dbg(dev, "read at %04x: %*ph, %d\n", addr, len, buf, ret); + + if (ret != 2) { + dev_err(dev, "Read at %#06x of %d bytes failed with code %d.\n", + addr, len, ret); + ctx->error = ret < 0 ? ret : -EIO; + } +} + +static u8 sii8620_readb(struct sii8620 *ctx, u16 addr) +{ + u8 ret; + + sii8620_read_buf(ctx, addr, &ret, 1); + return ret; +} + +static void sii8620_write_buf(struct sii8620 *ctx, u16 addr, const u8 *buf, + int len) +{ + struct device *dev = ctx->dev; + struct i2c_client *client = to_i2c_client(dev); + u8 data[2]; + struct i2c_msg msg = { + .addr = sii8620_i2c_page[addr >> 8], + .flags = client->flags, + .len = len + 1, + }; + int ret; + + if (ctx->error) + return; + + if (len > 1) { + msg.buf = kmalloc(len + 1, GFP_KERNEL); + if (!msg.buf) { + ctx->error = -ENOMEM; + return; + } + memcpy(msg.buf + 1, buf, len); + } else { + msg.buf = data; + msg.buf[1] = *buf; + } + + msg.buf[0] = addr; + + ret = i2c_transfer(client->adapter, &msg, 1); + dev_dbg(dev, "write at %04x: %*ph, %d\n", addr, len, buf, ret); + + if (ret != 1) { + dev_err(dev, "Write at %#06x of %*ph failed with code %d.\n", + addr, len, buf, ret); + ctx->error = ret ?: -EIO; + } + + if (len > 1) + kfree(msg.buf); +} + +#define sii8620_write(ctx, addr, arr...) \ +({\ + u8 d[] = { arr }; \ + sii8620_write_buf(ctx, addr, d, ARRAY_SIZE(d)); \ +}) + +static void __sii8620_write_seq(struct sii8620 *ctx, const u16 *seq, int len) +{ + int i; + + for (i = 0; i < len; i += 2) + sii8620_write(ctx, seq[i], seq[i + 1]); +} + +#define sii8620_write_seq(ctx, seq...) \ +({\ + const u16 d[] = { seq }; \ + __sii8620_write_seq(ctx, d, ARRAY_SIZE(d)); \ +}) + +#define sii8620_write_seq_static(ctx, seq...) \ +({\ + static const u16 d[] = { seq }; \ + __sii8620_write_seq(ctx, d, ARRAY_SIZE(d)); \ +}) + +static void sii8620_setbits(struct sii8620 *ctx, u16 addr, u8 mask, u8 val) +{ + val = (val & mask) | (sii8620_readb(ctx, addr) & ~mask); + sii8620_write(ctx, addr, val); +} + +static void sii8620_mt_cleanup(struct sii8620 *ctx) +{ + struct sii8620_mt_msg *msg, *n; + + list_for_each_entry_safe(msg, n, &ctx->mt_queue, node) { + list_del(&msg->node); + kfree(msg); + } + ctx->mt_state = MT_STATE_READY; +} + +static void sii8620_mt_work(struct sii8620 *ctx) +{ + struct sii8620_mt_msg *msg; + + if (ctx->error) + return; + if (ctx->mt_state == MT_STATE_BUSY || list_empty(&ctx->mt_queue)) + return; + + if (ctx->mt_state == MT_STATE_DONE) { + ctx->mt_state = MT_STATE_READY; + msg = list_first_entry(&ctx->mt_queue, struct sii8620_mt_msg, + node); + if (msg->recv) + msg->recv(ctx, msg); + list_del(&msg->node); + kfree(msg); + } + + if (ctx->mt_state != MT_STATE_READY || list_empty(&ctx->mt_queue)) + return; + + ctx->mt_state = MT_STATE_BUSY; + msg = list_first_entry(&ctx->mt_queue, struct sii8620_mt_msg, node); + if (msg->send) + msg->send(ctx, msg); +} + +static void sii8620_mt_msc_cmd_send(struct sii8620 *ctx, + struct sii8620_mt_msg *msg) +{ + switch (msg->reg[0]) { + case MHL_WRITE_STAT: + case MHL_SET_INT: + sii8620_write_buf(ctx, REG_MSC_CMD_OR_OFFSET, msg->reg + 1, 2); + sii8620_write(ctx, REG_MSC_COMMAND_START, + BIT_MSC_COMMAND_START_WRITE_STAT); + break; + case MHL_MSC_MSG: + sii8620_write_buf(ctx, REG_MSC_CMD_OR_OFFSET, msg->reg, 3); + sii8620_write(ctx, REG_MSC_COMMAND_START, + BIT_MSC_COMMAND_START_MSC_MSG); + break; + default: + dev_err(ctx->dev, "%s: command %#x not supported\n", __func__, + msg->reg[0]); + } +} + +static struct sii8620_mt_msg *sii8620_mt_msg_new(struct sii8620 *ctx) +{ + struct sii8620_mt_msg *msg = kzalloc(sizeof(*msg), GFP_KERNEL); + + if (!msg) + ctx->error = -ENOMEM; + else + list_add_tail(&msg->node, &ctx->mt_queue); + + return msg; +} + +static void sii8620_mt_msc_cmd(struct sii8620 *ctx, u8 cmd, u8 arg1, u8 arg2) +{ + struct sii8620_mt_msg *msg = sii8620_mt_msg_new(ctx); + + if (!msg) + return; + + msg->reg[0] = cmd; + msg->reg[1] = arg1; + msg->reg[2] = arg2; + msg->send = sii8620_mt_msc_cmd_send; +} + +static void sii8620_mt_write_stat(struct sii8620 *ctx, u8 reg, u8 val) +{ + sii8620_mt_msc_cmd(ctx, MHL_WRITE_STAT, reg, val); +} + +static inline void sii8620_mt_set_int(struct sii8620 *ctx, u8 irq, u8 mask) +{ + sii8620_mt_msc_cmd(ctx, MHL_SET_INT, irq, mask); +} + +static void sii8620_mt_msc_msg(struct sii8620 *ctx, u8 cmd, u8 data) +{ + sii8620_mt_msc_cmd(ctx, MHL_MSC_MSG, cmd, data); +} + +static void sii8620_mt_rap(struct sii8620 *ctx, u8 code) +{ + sii8620_mt_msc_msg(ctx, MHL_MSC_MSG_RAP, code); +} + +static void sii8620_mt_read_devcap_send(struct sii8620 *ctx, + struct sii8620_mt_msg *msg) +{ + u8 ctrl = BIT_EDID_CTRL_DEVCAP_SELECT_DEVCAP + | BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO + | BIT_EDID_CTRL_EDID_MODE_EN; + + if (msg->reg[0] == MHL_READ_XDEVCAP) + ctrl |= BIT_EDID_CTRL_XDEVCAP_EN; + + sii8620_write_seq(ctx, + REG_INTR9_MASK, BIT_INTR9_DEVCAP_DONE, + REG_EDID_CTRL, ctrl, + REG_TPI_CBUS_START, BIT_TPI_CBUS_START_GET_DEVCAP_START + ); +} + +/* copy src to dst and set changed bits in src */ +static void sii8620_update_array(u8 *dst, u8 *src, int count) +{ + while (--count >= 0) { + *src ^= *dst; + *dst++ ^= *src++; + } +} + +static void sii8620_mr_devcap(struct sii8620 *ctx) +{ + static const char * const sink_str[] = { + [SINK_NONE] = "NONE", + [SINK_HDMI] = "HDMI", + [SINK_DVI] = "DVI" + }; + + u8 dcap[MHL_DCAP_SIZE]; + char sink_name[20]; + struct device *dev = ctx->dev; + + sii8620_read_buf(ctx, REG_EDID_FIFO_RD_DATA, dcap, MHL_DCAP_SIZE); + if (ctx->error < 0) + return; + + dev_info(dev, "dcap: %*ph\n", MHL_DCAP_SIZE, dcap); + dev_info(dev, "detected dongle MHL %d.%d, ChipID %02x%02x:%02x%02x\n", + dcap[MHL_DCAP_MHL_VERSION] / 16, + dcap[MHL_DCAP_MHL_VERSION] % 16, dcap[MHL_DCAP_ADOPTER_ID_H], + dcap[MHL_DCAP_ADOPTER_ID_L], dcap[MHL_DCAP_DEVICE_ID_H], + dcap[MHL_DCAP_DEVICE_ID_L]); + sii8620_update_array(ctx->devcap, dcap, MHL_DCAP_SIZE); + + if (!(dcap[MHL_DCAP_CAT] & MHL_DCAP_CAT_SINK)) + return; + + sii8620_fetch_edid(ctx); + if (!ctx->edid) { + dev_err(ctx->dev, "Cannot fetch EDID\n"); + sii8620_mhl_disconnected(ctx); + return; + } + + if (drm_detect_hdmi_monitor(ctx->edid)) + ctx->sink_type = SINK_HDMI; + else + ctx->sink_type = SINK_DVI; + + drm_edid_get_monitor_name(ctx->edid, sink_name, ARRAY_SIZE(sink_name)); + + dev_info(dev, "detected sink(type: %s): %s\n", + sink_str[ctx->sink_type], sink_name); + sii8620_set_upstream_edid(ctx); + sii8620_enable_hpd(ctx); +} + +static void sii8620_mr_xdevcap(struct sii8620 *ctx) +{ + sii8620_read_buf(ctx, REG_EDID_FIFO_RD_DATA, ctx->xdevcap, + MHL_XDC_SIZE); + + sii8620_mt_write_stat(ctx, MHL_XDS_REG(CURR_ECBUS_MODE), + MHL_XDS_ECBUS_S | MHL_XDS_SLOT_MODE_8BIT); + sii8620_mt_rap(ctx, MHL_RAP_CBUS_MODE_UP); +} + +static void sii8620_mt_read_devcap_recv(struct sii8620 *ctx, + struct sii8620_mt_msg *msg) +{ + u8 ctrl = BIT_EDID_CTRL_DEVCAP_SELECT_DEVCAP + | BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO + | BIT_EDID_CTRL_EDID_MODE_EN; + + if (msg->reg[0] == MHL_READ_XDEVCAP) + ctrl |= BIT_EDID_CTRL_XDEVCAP_EN; + + sii8620_write_seq(ctx, + REG_INTR9_MASK, BIT_INTR9_DEVCAP_DONE | BIT_INTR9_EDID_DONE + | BIT_INTR9_EDID_ERROR, + REG_EDID_CTRL, ctrl, + REG_EDID_FIFO_ADDR, 0 + ); + + if (msg->reg[0] == MHL_READ_XDEVCAP) + sii8620_mr_xdevcap(ctx); + else + sii8620_mr_devcap(ctx); +} + +static void sii8620_mt_read_devcap(struct sii8620 *ctx, bool xdevcap) +{ + struct sii8620_mt_msg *msg = sii8620_mt_msg_new(ctx); + + if (!msg) + return; + + msg->reg[0] = xdevcap ? MHL_READ_XDEVCAP : MHL_READ_DEVCAP; + msg->send = sii8620_mt_read_devcap_send; + msg->recv = sii8620_mt_read_devcap_recv; +} + +static void sii8620_fetch_edid(struct sii8620 *ctx) +{ + u8 lm_ddc, ddc_cmd, int3, cbus; + int fetched, i; + int edid_len = EDID_LENGTH; + u8 *edid; + + sii8620_readb(ctx, REG_CBUS_STATUS); + lm_ddc = sii8620_readb(ctx, REG_LM_DDC); + ddc_cmd = sii8620_readb(ctx, REG_DDC_CMD); + + sii8620_write_seq(ctx, + REG_INTR9_MASK, 0, + REG_EDID_CTRL, BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO, + REG_HDCP2X_POLL_CS, 0x71, + REG_HDCP2X_CTRL_0, BIT_HDCP2X_CTRL_0_HDCP2X_HDCPTX, + REG_LM_DDC, lm_ddc | BIT_LM_DDC_SW_TPI_EN_DISABLED, + ); + + for (i = 0; i < 256; ++i) { + u8 ddc_stat = sii8620_readb(ctx, REG_DDC_STATUS); + + if (!(ddc_stat & BIT_DDC_STATUS_DDC_I2C_IN_PROG)) + break; + sii8620_write(ctx, REG_DDC_STATUS, + BIT_DDC_STATUS_DDC_FIFO_EMPTY); + } + + sii8620_write(ctx, REG_DDC_ADDR, 0x50 << 1); + + edid = kmalloc(EDID_LENGTH, GFP_KERNEL); + if (!edid) { + ctx->error = -ENOMEM; + return; + } + +#define FETCH_SIZE 16 + for (fetched = 0; fetched < edid_len; fetched += FETCH_SIZE) { + sii8620_readb(ctx, REG_DDC_STATUS); + sii8620_write_seq(ctx, + REG_DDC_CMD, ddc_cmd | VAL_DDC_CMD_DDC_CMD_ABORT, + REG_DDC_CMD, ddc_cmd | VAL_DDC_CMD_DDC_CMD_CLEAR_FIFO, + REG_DDC_STATUS, BIT_DDC_STATUS_DDC_FIFO_EMPTY + ); + sii8620_write_seq(ctx, + REG_DDC_SEGM, fetched >> 8, + REG_DDC_OFFSET, fetched & 0xff, + REG_DDC_DIN_CNT1, FETCH_SIZE, + REG_DDC_DIN_CNT2, 0, + REG_DDC_CMD, ddc_cmd | VAL_DDC_CMD_ENH_DDC_READ_NO_ACK + ); + + do { + int3 = sii8620_readb(ctx, REG_INTR3); + cbus = sii8620_readb(ctx, REG_CBUS_STATUS); + + if (int3 & BIT_DDC_CMD_DONE) + break; + + if (!(cbus & BIT_CBUS_STATUS_CBUS_CONNECTED)) { + kfree(edid); + edid = NULL; + goto end; + } + } while (1); + + sii8620_readb(ctx, REG_DDC_STATUS); + while (sii8620_readb(ctx, REG_DDC_DOUT_CNT) < FETCH_SIZE) + usleep_range(10, 20); + + sii8620_read_buf(ctx, REG_DDC_DATA, edid + fetched, FETCH_SIZE); + if (fetched + FETCH_SIZE == EDID_LENGTH) { + u8 ext = ((struct edid *)edid)->extensions; + + if (ext) { + u8 *new_edid; + + edid_len += ext * EDID_LENGTH; + new_edid = krealloc(edid, edid_len, GFP_KERNEL); + if (!new_edid) { + kfree(edid); + ctx->error = -ENOMEM; + return; + } + edid = new_edid; + } + } + + if (fetched + FETCH_SIZE == edid_len) + sii8620_write(ctx, REG_INTR3, int3); + } + + sii8620_write(ctx, REG_LM_DDC, lm_ddc); + +end: + kfree(ctx->edid); + ctx->edid = (struct edid *)edid; +} + +static void sii8620_set_upstream_edid(struct sii8620 *ctx) +{ + sii8620_setbits(ctx, REG_DPD, BIT_DPD_PDNRX12 | BIT_DPD_PDIDCK_N + | BIT_DPD_PD_MHL_CLK_N, 0xff); + + sii8620_write_seq_static(ctx, + REG_RX_HDMI_CTRL3, 0x00, + REG_PKT_FILTER_0, 0xFF, + REG_PKT_FILTER_1, 0xFF, + REG_ALICE0_BW_I2C, 0x06 + ); + + sii8620_setbits(ctx, REG_RX_HDMI_CLR_BUFFER, + BIT_RX_HDMI_CLR_BUFFER_VSI_CLR_EN, 0xff); + + sii8620_write_seq_static(ctx, + REG_EDID_CTRL, BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO + | BIT_EDID_CTRL_EDID_MODE_EN, + REG_EDID_FIFO_ADDR, 0, + ); + + sii8620_write_buf(ctx, REG_EDID_FIFO_WR_DATA, (u8 *)ctx->edid, + (ctx->edid->extensions + 1) * EDID_LENGTH); + + sii8620_write_seq_static(ctx, + REG_EDID_CTRL, BIT_EDID_CTRL_EDID_PRIME_VALID + | BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO + | BIT_EDID_CTRL_EDID_MODE_EN, + REG_INTR5_MASK, BIT_INTR_SCDT_CHANGE, + REG_INTR9_MASK, 0 + ); +} + +static void sii8620_xtal_set_rate(struct sii8620 *ctx) +{ + static const struct { + unsigned int rate; + u8 div; + u8 tp1; + } rates[] = { + { 19200, 0x04, 0x53 }, + { 20000, 0x04, 0x62 }, + { 24000, 0x05, 0x75 }, + { 30000, 0x06, 0x92 }, + { 38400, 0x0c, 0xbc }, + }; + unsigned long rate = clk_get_rate(ctx->clk_xtal) / 1000; + int i; + + for (i = 0; i < ARRAY_SIZE(rates) - 1; ++i) + if (rate <= rates[i].rate) + break; + + if (rate != rates[i].rate) + dev_err(ctx->dev, "xtal clock rate(%lukHz) not supported, setting MHL for %ukHz.\n", + rate, rates[i].rate); + + sii8620_write(ctx, REG_DIV_CTL_MAIN, rates[i].div); + sii8620_write(ctx, REG_HDCP2X_TP1, rates[i].tp1); +} + +static int sii8620_hw_on(struct sii8620 *ctx) +{ + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies); + if (ret) + return ret; + usleep_range(10000, 20000); + return clk_prepare_enable(ctx->clk_xtal); +} + +static int sii8620_hw_off(struct sii8620 *ctx) +{ + clk_disable_unprepare(ctx->clk_xtal); + gpiod_set_value(ctx->gpio_reset, 1); + return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies); +} + +static void sii8620_hw_reset(struct sii8620 *ctx) +{ + usleep_range(10000, 20000); + gpiod_set_value(ctx->gpio_reset, 0); + usleep_range(5000, 20000); + gpiod_set_value(ctx->gpio_reset, 1); + usleep_range(10000, 20000); + gpiod_set_value(ctx->gpio_reset, 0); + msleep(300); +} + +static void sii8620_cbus_reset(struct sii8620 *ctx) +{ + sii8620_write_seq_static(ctx, + REG_PWD_SRST, BIT_PWD_SRST_CBUS_RST + | BIT_PWD_SRST_CBUS_RST_SW_EN, + REG_PWD_SRST, BIT_PWD_SRST_CBUS_RST_SW_EN + ); +} + +static void sii8620_set_auto_zone(struct sii8620 *ctx) +{ + if (ctx->mode != CM_MHL1) { + sii8620_write_seq_static(ctx, + REG_TX_ZONE_CTL1, 0x0, + REG_MHL_PLL_CTL0, VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_1X + | BIT_MHL_PLL_CTL0_CRYSTAL_CLK_SEL + | BIT_MHL_PLL_CTL0_ZONE_MASK_OE + ); + } else { + sii8620_write_seq_static(ctx, + REG_TX_ZONE_CTL1, VAL_TX_ZONE_CTL1_TX_ZONE_CTRL_MODE, + REG_MHL_PLL_CTL0, VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_1X + | BIT_MHL_PLL_CTL0_ZONE_MASK_OE + ); + } +} + +static void sii8620_stop_video(struct sii8620 *ctx) +{ + u8 uninitialized_var(val); + + sii8620_write_seq_static(ctx, + REG_TPI_INTR_EN, 0, + REG_HDCP2X_INTR0_MASK, 0, + REG_TPI_COPP_DATA2, 0, + REG_TPI_INTR_ST0, ~0, + ); + + switch (ctx->sink_type) { + case SINK_DVI: + val = BIT_TPI_SC_REG_TMDS_OE_POWER_DOWN + | BIT_TPI_SC_TPI_AV_MUTE; + break; + case SINK_HDMI: + val = BIT_TPI_SC_REG_TMDS_OE_POWER_DOWN + | BIT_TPI_SC_TPI_AV_MUTE + | BIT_TPI_SC_TPI_OUTPUT_MODE_0_HDMI; + break; + default: + return; + } + + sii8620_write(ctx, REG_TPI_SC, val); +} + +static void sii8620_start_hdmi(struct sii8620 *ctx) +{ + sii8620_write_seq_static(ctx, + REG_RX_HDMI_CTRL2, VAL_RX_HDMI_CTRL2_DEFVAL + | BIT_RX_HDMI_CTRL2_USE_AV_MUTE, + REG_VID_OVRRD, BIT_VID_OVRRD_PP_AUTO_DISABLE + | BIT_VID_OVRRD_M1080P_OVRRD, + REG_VID_MODE, 0, + REG_MHL_TOP_CTL, 0x1, + REG_MHLTX_CTL6, 0xa0, + REG_TPI_INPUT, VAL_TPI_FORMAT(RGB, FULL), + REG_TPI_OUTPUT, VAL_TPI_FORMAT(RGB, FULL), + ); + + sii8620_mt_write_stat(ctx, MHL_DST_REG(LINK_MODE), + MHL_DST_LM_CLK_MODE_NORMAL | + MHL_DST_LM_PATH_ENABLED); + + sii8620_set_auto_zone(ctx); + + sii8620_write(ctx, REG_TPI_SC, BIT_TPI_SC_TPI_OUTPUT_MODE_0_HDMI); + + sii8620_write_buf(ctx, REG_TPI_AVI_CHSUM, ctx->avif, + ARRAY_SIZE(ctx->avif)); + + sii8620_write(ctx, REG_PKT_FILTER_0, 0xa1, 0x2); +} + +static void sii8620_start_video(struct sii8620 *ctx) +{ + if (ctx->mode < CM_MHL3) + sii8620_stop_video(ctx); + + switch (ctx->sink_type) { + case SINK_HDMI: + sii8620_start_hdmi(ctx); + break; + case SINK_DVI: + default: + break; + } +} + +static void sii8620_disable_hpd(struct sii8620 *ctx) +{ + sii8620_setbits(ctx, REG_EDID_CTRL, BIT_EDID_CTRL_EDID_PRIME_VALID, 0); + sii8620_write_seq_static(ctx, + REG_HPD_CTRL, BIT_HPD_CTRL_HPD_OUT_OVR_EN, + REG_INTR8_MASK, 0 + ); +} + +static void sii8620_enable_hpd(struct sii8620 *ctx) +{ + sii8620_setbits(ctx, REG_TMDS_CSTAT_P3, + BIT_TMDS_CSTAT_P3_SCDT_CLR_AVI_DIS + | BIT_TMDS_CSTAT_P3_CLR_AVI, ~0); + sii8620_write_seq_static(ctx, + REG_HPD_CTRL, BIT_HPD_CTRL_HPD_OUT_OVR_EN + | BIT_HPD_CTRL_HPD_HIGH, + ); +} + +static void sii8620_enable_gen2_write_burst(struct sii8620 *ctx) +{ + if (ctx->gen2_write_burst) + return; + + sii8620_write_seq_static(ctx, + REG_MDT_RCV_TIMEOUT, 100, + REG_MDT_RCV_CTRL, BIT_MDT_RCV_CTRL_MDT_RCV_EN + ); + ctx->gen2_write_burst = 1; +} + +static void sii8620_disable_gen2_write_burst(struct sii8620 *ctx) +{ + if (!ctx->gen2_write_burst) + return; + + sii8620_write_seq_static(ctx, + REG_MDT_XMIT_CTRL, 0, + REG_MDT_RCV_CTRL, 0 + ); + ctx->gen2_write_burst = 0; +} + +static void sii8620_start_gen2_write_burst(struct sii8620 *ctx) +{ + sii8620_write_seq_static(ctx, + REG_MDT_INT_1_MASK, BIT_MDT_RCV_TIMEOUT + | BIT_MDT_RCV_SM_ABORT_PKT_RCVD | BIT_MDT_RCV_SM_ERROR + | BIT_MDT_XMIT_TIMEOUT | BIT_MDT_XMIT_SM_ABORT_PKT_RCVD + | BIT_MDT_XMIT_SM_ERROR, + REG_MDT_INT_0_MASK, BIT_MDT_XFIFO_EMPTY + | BIT_MDT_IDLE_AFTER_HAWB_DISABLE + | BIT_MDT_RFIFO_DATA_RDY + ); + sii8620_enable_gen2_write_burst(ctx); +} + +static void sii8620_mhl_discover(struct sii8620 *ctx) +{ + sii8620_write_seq_static(ctx, + REG_DISC_CTRL9, BIT_DISC_CTRL9_WAKE_DRVFLT + | BIT_DISC_CTRL9_DISC_PULSE_PROCEED, + REG_DISC_CTRL4, VAL_DISC_CTRL4(VAL_PUP_5K, VAL_PUP_20K), + REG_CBUS_DISC_INTR0_MASK, BIT_MHL3_EST_INT + | BIT_MHL_EST_INT + | BIT_NOT_MHL_EST_INT + | BIT_CBUS_MHL3_DISCON_INT + | BIT_CBUS_MHL12_DISCON_INT + | BIT_RGND_READY_INT, + REG_MHL_PLL_CTL0, VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_1X + | BIT_MHL_PLL_CTL0_CRYSTAL_CLK_SEL + | BIT_MHL_PLL_CTL0_ZONE_MASK_OE, + REG_MHL_DP_CTL0, BIT_MHL_DP_CTL0_DP_OE + | BIT_MHL_DP_CTL0_TX_OE_OVR, + REG_M3_CTRL, VAL_M3_CTRL_MHL3_VALUE, + REG_MHL_DP_CTL1, 0xA2, + REG_MHL_DP_CTL2, 0x03, + REG_MHL_DP_CTL3, 0x35, + REG_MHL_DP_CTL5, 0x02, + REG_MHL_DP_CTL6, 0x02, + REG_MHL_DP_CTL7, 0x03, + REG_COC_CTLC, 0xFF, + REG_DPD, BIT_DPD_PWRON_PLL | BIT_DPD_PDNTX12 + | BIT_DPD_OSC_EN | BIT_DPD_PWRON_HSIC, + REG_COC_INTR_MASK, BIT_COC_PLL_LOCK_STATUS_CHANGE + | BIT_COC_CALIBRATION_DONE, + REG_CBUS_INT_1_MASK, BIT_CBUS_MSC_ABORT_RCVD + | BIT_CBUS_CMD_ABORT, + REG_CBUS_INT_0_MASK, BIT_CBUS_MSC_MT_DONE + | BIT_CBUS_HPD_CHG + | BIT_CBUS_MSC_MR_WRITE_STAT + | BIT_CBUS_MSC_MR_MSC_MSG + | BIT_CBUS_MSC_MR_WRITE_BURST + | BIT_CBUS_MSC_MR_SET_INT + | BIT_CBUS_MSC_MT_DONE_NACK + ); +} + +static void sii8620_peer_specific_init(struct sii8620 *ctx) +{ + if (ctx->mode == CM_MHL3) + sii8620_write_seq_static(ctx, + REG_SYS_CTRL1, BIT_SYS_CTRL1_BLOCK_DDC_BY_HPD, + REG_EMSCINTRMASK1, + BIT_EMSCINTR1_EMSC_TRAINING_COMMA_ERR + ); + else + sii8620_write_seq_static(ctx, + REG_HDCP2X_INTR0_MASK, 0x00, + REG_EMSCINTRMASK1, 0x00, + REG_HDCP2X_INTR0, 0xFF, + REG_INTR1, 0xFF, + REG_SYS_CTRL1, BIT_SYS_CTRL1_BLOCK_DDC_BY_HPD + | BIT_SYS_CTRL1_TX_CTRL_HDMI + ); +} + +#define SII8620_MHL_VERSION 0x32 +#define SII8620_SCRATCHPAD_SIZE 16 +#define SII8620_INT_STAT_SIZE 0x33 + +static void sii8620_set_dev_cap(struct sii8620 *ctx) +{ + static const u8 devcap[MHL_DCAP_SIZE] = { + [MHL_DCAP_MHL_VERSION] = SII8620_MHL_VERSION, + [MHL_DCAP_CAT] = MHL_DCAP_CAT_SOURCE | MHL_DCAP_CAT_POWER, + [MHL_DCAP_ADOPTER_ID_H] = 0x01, + [MHL_DCAP_ADOPTER_ID_L] = 0x41, + [MHL_DCAP_VID_LINK_MODE] = MHL_DCAP_VID_LINK_RGB444 + | MHL_DCAP_VID_LINK_PPIXEL + | MHL_DCAP_VID_LINK_16BPP, + [MHL_DCAP_AUD_LINK_MODE] = MHL_DCAP_AUD_LINK_2CH, + [MHL_DCAP_VIDEO_TYPE] = MHL_DCAP_VT_GRAPHICS, + [MHL_DCAP_LOG_DEV_MAP] = MHL_DCAP_LD_GUI, + [MHL_DCAP_BANDWIDTH] = 0x0f, + [MHL_DCAP_FEATURE_FLAG] = MHL_DCAP_FEATURE_RCP_SUPPORT + | MHL_DCAP_FEATURE_RAP_SUPPORT + | MHL_DCAP_FEATURE_SP_SUPPORT, + [MHL_DCAP_SCRATCHPAD_SIZE] = SII8620_SCRATCHPAD_SIZE, + [MHL_DCAP_INT_STAT_SIZE] = SII8620_INT_STAT_SIZE, + }; + static const u8 xdcap[MHL_XDC_SIZE] = { + [MHL_XDC_ECBUS_SPEEDS] = MHL_XDC_ECBUS_S_075 + | MHL_XDC_ECBUS_S_8BIT, + [MHL_XDC_TMDS_SPEEDS] = MHL_XDC_TMDS_150 + | MHL_XDC_TMDS_300 | MHL_XDC_TMDS_600, + [MHL_XDC_ECBUS_ROLES] = MHL_XDC_DEV_HOST, + [MHL_XDC_LOG_DEV_MAPX] = MHL_XDC_LD_PHONE, + }; + + sii8620_write_buf(ctx, REG_MHL_DEVCAP_0, devcap, ARRAY_SIZE(devcap)); + sii8620_write_buf(ctx, REG_MHL_EXTDEVCAP_0, xdcap, ARRAY_SIZE(xdcap)); +} + +static void sii8620_mhl_init(struct sii8620 *ctx) +{ + sii8620_write_seq_static(ctx, + REG_DISC_CTRL4, VAL_DISC_CTRL4(VAL_PUP_OFF, VAL_PUP_20K), + REG_CBUS_MSC_COMPAT_CTRL, + BIT_CBUS_MSC_COMPAT_CTRL_XDEVCAP_EN, + ); + + sii8620_peer_specific_init(ctx); + + sii8620_disable_hpd(ctx); + + sii8620_write_seq_static(ctx, + REG_EDID_CTRL, BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO, + REG_DISC_CTRL9, BIT_DISC_CTRL9_WAKE_DRVFLT + | BIT_DISC_CTRL9_WAKE_PULSE_BYPASS, + REG_TMDS0_CCTRL1, 0x90, + REG_TMDS_CLK_EN, 0x01, + REG_TMDS_CH_EN, 0x11, + REG_BGR_BIAS, 0x87, + REG_ALICE0_ZONE_CTRL, 0xE8, + REG_ALICE0_MODE_CTRL, 0x04, + ); + sii8620_setbits(ctx, REG_LM_DDC, BIT_LM_DDC_SW_TPI_EN_DISABLED, 0); + sii8620_write_seq_static(ctx, + REG_TPI_HW_OPT3, 0x76, + REG_TMDS_CCTRL, BIT_TMDS_CCTRL_TMDS_OE, + REG_TPI_DTD_B2, 79, + ); + sii8620_set_dev_cap(ctx); + sii8620_write_seq_static(ctx, + REG_MDT_XMIT_TIMEOUT, 100, + REG_MDT_XMIT_CTRL, 0x03, + REG_MDT_XFIFO_STAT, 0x00, + REG_MDT_RCV_TIMEOUT, 100, + REG_CBUS_LINK_CTRL_8, 0x1D, + ); + + sii8620_start_gen2_write_burst(ctx); + sii8620_write_seq_static(ctx, + REG_BIST_CTRL, 0x00, + REG_COC_CTL1, 0x10, + REG_COC_CTL2, 0x18, + REG_COC_CTLF, 0x07, + REG_COC_CTL11, 0xF8, + REG_COC_CTL17, 0x61, + REG_COC_CTL18, 0x46, + REG_COC_CTL19, 0x15, + REG_COC_CTL1A, 0x01, + REG_MHL_COC_CTL3, BIT_MHL_COC_CTL3_COC_AECHO_EN, + REG_MHL_COC_CTL4, 0x2D, + REG_MHL_COC_CTL5, 0xF9, + REG_MSC_HEARTBEAT_CTRL, 0x27, + ); + sii8620_disable_gen2_write_burst(ctx); + + /* currently MHL3 is not supported, so we force version to 0 */ + sii8620_mt_write_stat(ctx, MHL_DST_REG(VERSION), 0); + sii8620_mt_write_stat(ctx, MHL_DST_REG(CONNECTED_RDY), + MHL_DST_CONN_DCAP_RDY | MHL_DST_CONN_XDEVCAPP_SUPP + | MHL_DST_CONN_POW_STAT); + sii8620_mt_set_int(ctx, MHL_INT_REG(RCHANGE), MHL_INT_RC_DCAP_CHG); +} + +static void sii8620_set_mode(struct sii8620 *ctx, enum sii8620_mode mode) +{ + if (ctx->mode == mode) + return; + + ctx->mode = mode; + + switch (mode) { + case CM_MHL1: + sii8620_write_seq_static(ctx, + REG_CBUS_MSC_COMPAT_CTRL, 0x02, + REG_M3_CTRL, VAL_M3_CTRL_MHL1_2_VALUE, + REG_DPD, BIT_DPD_PWRON_PLL | BIT_DPD_PDNTX12 + | BIT_DPD_OSC_EN, + REG_COC_INTR_MASK, 0 + ); + break; + case CM_MHL3: + sii8620_write_seq_static(ctx, + REG_M3_CTRL, VAL_M3_CTRL_MHL3_VALUE, + REG_COC_CTL0, 0x40, + REG_MHL_COC_CTL1, 0x07 + ); + break; + case CM_DISCONNECTED: + break; + default: + dev_err(ctx->dev, "%s mode %d not supported\n", __func__, mode); + break; + }; + + sii8620_set_auto_zone(ctx); + + if (mode != CM_MHL1) + return; + + sii8620_write_seq_static(ctx, + REG_MHL_DP_CTL0, 0xBC, + REG_MHL_DP_CTL1, 0xBB, + REG_MHL_DP_CTL3, 0x48, + REG_MHL_DP_CTL5, 0x39, + REG_MHL_DP_CTL2, 0x2A, + REG_MHL_DP_CTL6, 0x2A, + REG_MHL_DP_CTL7, 0x08 + ); +} + +static void sii8620_disconnect(struct sii8620 *ctx) +{ + sii8620_disable_gen2_write_burst(ctx); + sii8620_stop_video(ctx); + msleep(50); + sii8620_cbus_reset(ctx); + sii8620_set_mode(ctx, CM_DISCONNECTED); + sii8620_write_seq_static(ctx, + REG_COC_CTL0, 0x40, + REG_CBUS3_CNVT, 0x84, + REG_COC_CTL14, 0x00, + REG_COC_CTL0, 0x40, + REG_HRXCTRL3, 0x07, + REG_MHL_PLL_CTL0, VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_1X + | BIT_MHL_PLL_CTL0_CRYSTAL_CLK_SEL + | BIT_MHL_PLL_CTL0_ZONE_MASK_OE, + REG_MHL_DP_CTL0, BIT_MHL_DP_CTL0_DP_OE + | BIT_MHL_DP_CTL0_TX_OE_OVR, + REG_MHL_DP_CTL1, 0xBB, + REG_MHL_DP_CTL3, 0x48, + REG_MHL_DP_CTL5, 0x3F, + REG_MHL_DP_CTL2, 0x2F, + REG_MHL_DP_CTL6, 0x2A, + REG_MHL_DP_CTL7, 0x03 + ); + sii8620_disable_hpd(ctx); + sii8620_write_seq_static(ctx, + REG_M3_CTRL, VAL_M3_CTRL_MHL3_VALUE, + REG_MHL_COC_CTL1, 0x07, + REG_DISC_CTRL4, VAL_DISC_CTRL4(VAL_PUP_OFF, VAL_PUP_20K), + REG_DISC_CTRL8, 0x00, + REG_DISC_CTRL9, BIT_DISC_CTRL9_WAKE_DRVFLT + | BIT_DISC_CTRL9_WAKE_PULSE_BYPASS, + REG_INT_CTRL, 0x00, + REG_MSC_HEARTBEAT_CTRL, 0x27, + REG_DISC_CTRL1, 0x25, + REG_CBUS_DISC_INTR0, (u8)~BIT_RGND_READY_INT, + REG_CBUS_DISC_INTR0_MASK, BIT_RGND_READY_INT, + REG_MDT_INT_1, 0xff, + REG_MDT_INT_1_MASK, 0x00, + REG_MDT_INT_0, 0xff, + REG_MDT_INT_0_MASK, 0x00, + REG_COC_INTR, 0xff, + REG_COC_INTR_MASK, 0x00, + REG_TRXINTH, 0xff, + REG_TRXINTMH, 0x00, + REG_CBUS_INT_0, 0xff, + REG_CBUS_INT_0_MASK, 0x00, + REG_CBUS_INT_1, 0xff, + REG_CBUS_INT_1_MASK, 0x00, + REG_EMSCINTR, 0xff, + REG_EMSCINTRMASK, 0x00, + REG_EMSCINTR1, 0xff, + REG_EMSCINTRMASK1, 0x00, + REG_INTR8, 0xff, + REG_INTR8_MASK, 0x00, + REG_TPI_INTR_ST0, 0xff, + REG_TPI_INTR_EN, 0x00, + REG_HDCP2X_INTR0, 0xff, + REG_HDCP2X_INTR0_MASK, 0x00, + REG_INTR9, 0xff, + REG_INTR9_MASK, 0x00, + REG_INTR3, 0xff, + REG_INTR3_MASK, 0x00, + REG_INTR5, 0xff, + REG_INTR5_MASK, 0x00, + REG_INTR2, 0xff, + REG_INTR2_MASK, 0x00, + ); + memset(ctx->stat, 0, sizeof(ctx->stat)); + memset(ctx->xstat, 0, sizeof(ctx->xstat)); + memset(ctx->devcap, 0, sizeof(ctx->devcap)); + memset(ctx->xdevcap, 0, sizeof(ctx->xdevcap)); + ctx->cbus_status = 0; + ctx->sink_type = SINK_NONE; + kfree(ctx->edid); + ctx->edid = NULL; + sii8620_mt_cleanup(ctx); +} + +static void sii8620_mhl_disconnected(struct sii8620 *ctx) +{ + sii8620_write_seq_static(ctx, + REG_DISC_CTRL4, VAL_DISC_CTRL4(VAL_PUP_OFF, VAL_PUP_20K), + REG_CBUS_MSC_COMPAT_CTRL, + BIT_CBUS_MSC_COMPAT_CTRL_XDEVCAP_EN + ); + sii8620_disconnect(ctx); +} + +static void sii8620_irq_disc(struct sii8620 *ctx) +{ + u8 stat = sii8620_readb(ctx, REG_CBUS_DISC_INTR0); + + if (stat & VAL_CBUS_MHL_DISCON) + sii8620_mhl_disconnected(ctx); + + if (stat & BIT_RGND_READY_INT) { + u8 stat2 = sii8620_readb(ctx, REG_DISC_STAT2); + + if ((stat2 & MSK_DISC_STAT2_RGND) == VAL_RGND_1K) { + sii8620_mhl_discover(ctx); + } else { + sii8620_write_seq_static(ctx, + REG_DISC_CTRL9, BIT_DISC_CTRL9_WAKE_DRVFLT + | BIT_DISC_CTRL9_NOMHL_EST + | BIT_DISC_CTRL9_WAKE_PULSE_BYPASS, + REG_CBUS_DISC_INTR0_MASK, BIT_RGND_READY_INT + | BIT_CBUS_MHL3_DISCON_INT + | BIT_CBUS_MHL12_DISCON_INT + | BIT_NOT_MHL_EST_INT + ); + } + } + if (stat & BIT_MHL_EST_INT) + sii8620_mhl_init(ctx); + + sii8620_write(ctx, REG_CBUS_DISC_INTR0, stat); +} + +static void sii8620_irq_g2wb(struct sii8620 *ctx) +{ + u8 stat = sii8620_readb(ctx, REG_MDT_INT_0); + + if (stat & BIT_MDT_IDLE_AFTER_HAWB_DISABLE) + dev_dbg(ctx->dev, "HAWB idle\n"); + + sii8620_write(ctx, REG_MDT_INT_0, stat); +} + +static void sii8620_status_changed_dcap(struct sii8620 *ctx) +{ + if (ctx->stat[MHL_DST_CONNECTED_RDY] & MHL_DST_CONN_DCAP_RDY) { + sii8620_set_mode(ctx, CM_MHL1); + sii8620_peer_specific_init(ctx); + sii8620_write(ctx, REG_INTR9_MASK, BIT_INTR9_DEVCAP_DONE + | BIT_INTR9_EDID_DONE | BIT_INTR9_EDID_ERROR); + } +} + +static void sii8620_status_changed_path(struct sii8620 *ctx) +{ + if (ctx->stat[MHL_DST_LINK_MODE] & MHL_DST_LM_PATH_ENABLED) { + sii8620_mt_write_stat(ctx, MHL_DST_REG(LINK_MODE), + MHL_DST_LM_CLK_MODE_NORMAL + | MHL_DST_LM_PATH_ENABLED); + sii8620_mt_read_devcap(ctx, false); + } else { + sii8620_mt_write_stat(ctx, MHL_DST_REG(LINK_MODE), + MHL_DST_LM_CLK_MODE_NORMAL); + } +} + +static void sii8620_msc_mr_write_stat(struct sii8620 *ctx) +{ + u8 st[MHL_DST_SIZE], xst[MHL_XDS_SIZE]; + + sii8620_read_buf(ctx, REG_MHL_STAT_0, st, MHL_DST_SIZE); + sii8620_read_buf(ctx, REG_MHL_EXTSTAT_0, xst, MHL_XDS_SIZE); + + sii8620_update_array(ctx->stat, st, MHL_DST_SIZE); + sii8620_update_array(ctx->xstat, xst, MHL_XDS_SIZE); + + if (st[MHL_DST_CONNECTED_RDY] & MHL_DST_CONN_DCAP_RDY) + sii8620_status_changed_dcap(ctx); + + if (st[MHL_DST_LINK_MODE] & MHL_DST_LM_PATH_ENABLED) + sii8620_status_changed_path(ctx); +} + +static void sii8620_msc_mr_set_int(struct sii8620 *ctx) +{ + u8 ints[MHL_INT_SIZE]; + + sii8620_read_buf(ctx, REG_MHL_INT_0, ints, MHL_INT_SIZE); + sii8620_write_buf(ctx, REG_MHL_INT_0, ints, MHL_INT_SIZE); +} + +static struct sii8620_mt_msg *sii8620_msc_msg_first(struct sii8620 *ctx) +{ + struct device *dev = ctx->dev; + + if (list_empty(&ctx->mt_queue)) { + dev_err(dev, "unexpected MSC MT response\n"); + return NULL; + } + + return list_first_entry(&ctx->mt_queue, struct sii8620_mt_msg, node); +} + +static void sii8620_msc_mt_done(struct sii8620 *ctx) +{ + struct sii8620_mt_msg *msg = sii8620_msc_msg_first(ctx); + + if (!msg) + return; + + msg->ret = sii8620_readb(ctx, REG_MSC_MT_RCVD_DATA0); + ctx->mt_state = MT_STATE_DONE; +} + +static void sii8620_msc_mr_msc_msg(struct sii8620 *ctx) +{ + struct sii8620_mt_msg *msg = sii8620_msc_msg_first(ctx); + u8 buf[2]; + + if (!msg) + return; + + sii8620_read_buf(ctx, REG_MSC_MR_MSC_MSG_RCVD_1ST_DATA, buf, 2); + + switch (buf[0]) { + case MHL_MSC_MSG_RAPK: + msg->ret = buf[1]; + ctx->mt_state = MT_STATE_DONE; + break; + default: + dev_err(ctx->dev, "%s message type %d,%d not supported", + __func__, buf[0], buf[1]); + } +} + +static void sii8620_irq_msc(struct sii8620 *ctx) +{ + u8 stat = sii8620_readb(ctx, REG_CBUS_INT_0); + + if (stat & ~BIT_CBUS_HPD_CHG) + sii8620_write(ctx, REG_CBUS_INT_0, stat & ~BIT_CBUS_HPD_CHG); + + if (stat & BIT_CBUS_HPD_CHG) { + u8 cbus_stat = sii8620_readb(ctx, REG_CBUS_STATUS); + + if ((cbus_stat ^ ctx->cbus_status) & BIT_CBUS_STATUS_CBUS_HPD) { + sii8620_write(ctx, REG_CBUS_INT_0, BIT_CBUS_HPD_CHG); + } else { + stat ^= BIT_CBUS_STATUS_CBUS_HPD; + cbus_stat ^= BIT_CBUS_STATUS_CBUS_HPD; + } + ctx->cbus_status = cbus_stat; + } + + if (stat & BIT_CBUS_MSC_MR_WRITE_STAT) + sii8620_msc_mr_write_stat(ctx); + + if (stat & BIT_CBUS_MSC_MR_SET_INT) + sii8620_msc_mr_set_int(ctx); + + if (stat & BIT_CBUS_MSC_MT_DONE) + sii8620_msc_mt_done(ctx); + + if (stat & BIT_CBUS_MSC_MR_MSC_MSG) + sii8620_msc_mr_msc_msg(ctx); +} + +static void sii8620_irq_coc(struct sii8620 *ctx) +{ + u8 stat = sii8620_readb(ctx, REG_COC_INTR); + + sii8620_write(ctx, REG_COC_INTR, stat); +} + +static void sii8620_irq_merr(struct sii8620 *ctx) +{ + u8 stat = sii8620_readb(ctx, REG_CBUS_INT_1); + + sii8620_write(ctx, REG_CBUS_INT_1, stat); +} + +static void sii8620_irq_edid(struct sii8620 *ctx) +{ + u8 stat = sii8620_readb(ctx, REG_INTR9); + + sii8620_write(ctx, REG_INTR9, stat); + + if (stat & BIT_INTR9_DEVCAP_DONE) + ctx->mt_state = MT_STATE_DONE; +} + +static void sii8620_scdt_high(struct sii8620 *ctx) +{ + sii8620_write_seq_static(ctx, + REG_INTR8_MASK, BIT_CEA_NEW_AVI | BIT_CEA_NEW_VSI, + REG_TPI_SC, BIT_TPI_SC_TPI_OUTPUT_MODE_0_HDMI, + ); +} + +static void sii8620_scdt_low(struct sii8620 *ctx) +{ + sii8620_write(ctx, REG_TMDS_CSTAT_P3, + BIT_TMDS_CSTAT_P3_SCDT_CLR_AVI_DIS | + BIT_TMDS_CSTAT_P3_CLR_AVI); + + sii8620_stop_video(ctx); + + sii8620_write(ctx, REG_INTR8_MASK, 0); +} + +static void sii8620_irq_scdt(struct sii8620 *ctx) +{ + u8 stat = sii8620_readb(ctx, REG_INTR5); + + if (stat & BIT_INTR_SCDT_CHANGE) { + u8 cstat = sii8620_readb(ctx, REG_TMDS_CSTAT_P3); + + if (cstat & BIT_TMDS_CSTAT_P3_SCDT) + sii8620_scdt_high(ctx); + else + sii8620_scdt_low(ctx); + } + + sii8620_write(ctx, REG_INTR5, stat); +} + +static void sii8620_new_vsi(struct sii8620 *ctx) +{ + u8 vsif[11]; + + sii8620_write(ctx, REG_RX_HDMI_CTRL2, + VAL_RX_HDMI_CTRL2_DEFVAL | + BIT_RX_HDMI_CTRL2_VSI_MON_SEL_VSI); + sii8620_read_buf(ctx, REG_RX_HDMI_MON_PKT_HEADER1, vsif, + ARRAY_SIZE(vsif)); +} + +static void sii8620_new_avi(struct sii8620 *ctx) +{ + sii8620_write(ctx, REG_RX_HDMI_CTRL2, VAL_RX_HDMI_CTRL2_DEFVAL); + sii8620_read_buf(ctx, REG_RX_HDMI_MON_PKT_HEADER1, ctx->avif, + ARRAY_SIZE(ctx->avif)); +} + +static void sii8620_irq_infr(struct sii8620 *ctx) +{ + u8 stat = sii8620_readb(ctx, REG_INTR8) + & (BIT_CEA_NEW_VSI | BIT_CEA_NEW_AVI); + + sii8620_write(ctx, REG_INTR8, stat); + + if (stat & BIT_CEA_NEW_VSI) + sii8620_new_vsi(ctx); + + if (stat & BIT_CEA_NEW_AVI) + sii8620_new_avi(ctx); + + if (stat & (BIT_CEA_NEW_VSI | BIT_CEA_NEW_AVI)) + sii8620_start_video(ctx); +} + +/* endian agnostic, non-volatile version of test_bit */ +static bool sii8620_test_bit(unsigned int nr, const u8 *addr) +{ + return 1 & (addr[nr / BITS_PER_BYTE] >> (nr % BITS_PER_BYTE)); +} + +static irqreturn_t sii8620_irq_thread(int irq, void *data) +{ + static const struct { + int bit; + void (*handler)(struct sii8620 *ctx); + } irq_vec[] = { + { BIT_FAST_INTR_STAT_DISC, sii8620_irq_disc }, + { BIT_FAST_INTR_STAT_G2WB, sii8620_irq_g2wb }, + { BIT_FAST_INTR_STAT_COC, sii8620_irq_coc }, + { BIT_FAST_INTR_STAT_MSC, sii8620_irq_msc }, + { BIT_FAST_INTR_STAT_MERR, sii8620_irq_merr }, + { BIT_FAST_INTR_STAT_EDID, sii8620_irq_edid }, + { BIT_FAST_INTR_STAT_SCDT, sii8620_irq_scdt }, + { BIT_FAST_INTR_STAT_INFR, sii8620_irq_infr }, + }; + struct sii8620 *ctx = data; + u8 stats[LEN_FAST_INTR_STAT]; + int i, ret; + + mutex_lock(&ctx->lock); + + sii8620_read_buf(ctx, REG_FAST_INTR_STAT, stats, ARRAY_SIZE(stats)); + for (i = 0; i < ARRAY_SIZE(irq_vec); ++i) + if (sii8620_test_bit(irq_vec[i].bit, stats)) + irq_vec[i].handler(ctx); + + sii8620_mt_work(ctx); + + ret = sii8620_clear_error(ctx); + if (ret) { + dev_err(ctx->dev, "Error during IRQ handling, %d.\n", ret); + sii8620_mhl_disconnected(ctx); + } + mutex_unlock(&ctx->lock); + + return IRQ_HANDLED; +} + +static void sii8620_cable_in(struct sii8620 *ctx) +{ + struct device *dev = ctx->dev; + u8 ver[5]; + int ret; + + ret = sii8620_hw_on(ctx); + if (ret) { + dev_err(dev, "Error powering on, %d.\n", ret); + return; + } + sii8620_hw_reset(ctx); + + sii8620_read_buf(ctx, REG_VND_IDL, ver, ARRAY_SIZE(ver)); + ret = sii8620_clear_error(ctx); + if (ret) { + dev_err(dev, "Error accessing I2C bus, %d.\n", ret); + return; + } + + dev_info(dev, "ChipID %02x%02x:%02x%02x rev %02x.\n", ver[1], ver[0], + ver[3], ver[2], ver[4]); + + sii8620_write(ctx, REG_DPD, + BIT_DPD_PWRON_PLL | BIT_DPD_PDNTX12 | BIT_DPD_OSC_EN); + + sii8620_xtal_set_rate(ctx); + sii8620_disconnect(ctx); + + sii8620_write_seq_static(ctx, + REG_MHL_CBUS_CTL0, VAL_MHL_CBUS_CTL0_CBUS_DRV_SEL_STRONG + | VAL_MHL_CBUS_CTL0_CBUS_RGND_VBIAS_734, + REG_MHL_CBUS_CTL1, VAL_MHL_CBUS_CTL1_1115_OHM, + REG_DPD, BIT_DPD_PWRON_PLL | BIT_DPD_PDNTX12 | BIT_DPD_OSC_EN, + ); + + ret = sii8620_clear_error(ctx); + if (ret) { + dev_err(dev, "Error accessing I2C bus, %d.\n", ret); + return; + } + + enable_irq(to_i2c_client(ctx->dev)->irq); +} + +static inline struct sii8620 *bridge_to_sii8620(struct drm_bridge *bridge) +{ + return container_of(bridge, struct sii8620, bridge); +} + +static bool sii8620_mode_fixup(struct drm_bridge *bridge, + const struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct sii8620 *ctx = bridge_to_sii8620(bridge); + bool ret = false; + int max_clock = 74250; + + mutex_lock(&ctx->lock); + + if (mode->flags & DRM_MODE_FLAG_INTERLACE) + goto out; + + if (ctx->devcap[MHL_DCAP_VID_LINK_MODE] & MHL_DCAP_VID_LINK_PPIXEL) + max_clock = 300000; + + ret = mode->clock <= max_clock; + +out: + mutex_unlock(&ctx->lock); + + return ret; +} + +static const struct drm_bridge_funcs sii8620_bridge_funcs = { + .mode_fixup = sii8620_mode_fixup, +}; + +static int sii8620_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct sii8620 *ctx; + int ret; + + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + ctx->dev = dev; + mutex_init(&ctx->lock); + INIT_LIST_HEAD(&ctx->mt_queue); + + ctx->clk_xtal = devm_clk_get(dev, "xtal"); + if (IS_ERR(ctx->clk_xtal)) { + dev_err(dev, "failed to get xtal clock from DT\n"); + return PTR_ERR(ctx->clk_xtal); + } + + if (!client->irq) { + dev_err(dev, "no irq provided\n"); + return -EINVAL; + } + irq_set_status_flags(client->irq, IRQ_NOAUTOEN); + ret = devm_request_threaded_irq(dev, client->irq, NULL, + sii8620_irq_thread, + IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + "sii8620", ctx); + + ctx->gpio_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(ctx->gpio_reset)) { + dev_err(dev, "failed to get reset gpio from DT\n"); + return PTR_ERR(ctx->gpio_reset); + } + + ctx->supplies[0].supply = "cvcc10"; + ctx->supplies[1].supply = "iovcc18"; + ret = devm_regulator_bulk_get(dev, 2, ctx->supplies); + if (ret) + return ret; + + i2c_set_clientdata(client, ctx); + + ctx->bridge.funcs = &sii8620_bridge_funcs; + ctx->bridge.of_node = dev->of_node; + drm_bridge_add(&ctx->bridge); + + sii8620_cable_in(ctx); + + return 0; +} + +static int sii8620_remove(struct i2c_client *client) +{ + struct sii8620 *ctx = i2c_get_clientdata(client); + + disable_irq(to_i2c_client(ctx->dev)->irq); + drm_bridge_remove(&ctx->bridge); + sii8620_hw_off(ctx); + + return 0; +} + +static const struct of_device_id sii8620_dt_match[] = { + { .compatible = "sil,sii8620" }, + { }, +}; +MODULE_DEVICE_TABLE(of, sii8620_dt_match); + +static const struct i2c_device_id sii8620_id[] = { + { "sii8620", 0 }, + { }, +}; + +MODULE_DEVICE_TABLE(i2c, sii8620_id); +static struct i2c_driver sii8620_driver = { + .driver = { + .name = "sii8620", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(sii8620_dt_match), + }, + .probe = sii8620_probe, + .remove = sii8620_remove, + .id_table = sii8620_id, +}; + +module_i2c_driver(sii8620_driver); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpu/drm/bridge/sil-sii8620.h b/drivers/gpu/drm/bridge/sil-sii8620.h new file mode 100644 index 000000000000..6ff616a4f6ce --- /dev/null +++ b/drivers/gpu/drm/bridge/sil-sii8620.h @@ -0,0 +1,1517 @@ +/* + * Registers of Silicon Image SiI8620 Mobile HD Transmitter + * + * Copyright (C) 2015, Samsung Electronics Co., Ltd. + * Andrzej Hajda <a.hajda@samsung.com> + * + * Based on MHL driver for Android devices. + * Copyright (C) 2013-2014 Silicon Image, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __SIL_SII8620_H__ +#define __SIL_SII8620_H__ + +/* Vendor ID Low byte, default value: 0x01 */ +#define REG_VND_IDL 0x0000 + +/* Vendor ID High byte, default value: 0x00 */ +#define REG_VND_IDH 0x0001 + +/* Device ID Low byte, default value: 0x60 */ +#define REG_DEV_IDL 0x0002 + +/* Device ID High byte, default value: 0x86 */ +#define REG_DEV_IDH 0x0003 + +/* Device Revision, default value: 0x10 */ +#define REG_DEV_REV 0x0004 + +/* OTP DBYTE510, default value: 0x00 */ +#define REG_OTP_DBYTE510 0x0006 + +/* System Control #1, default value: 0x00 */ +#define REG_SYS_CTRL1 0x0008 +#define BIT_SYS_CTRL1_OTPVMUTEOVR_SET BIT(7) +#define BIT_SYS_CTRL1_VSYNCPIN BIT(6) +#define BIT_SYS_CTRL1_OTPADROPOVR_SET BIT(5) +#define BIT_SYS_CTRL1_BLOCK_DDC_BY_HPD BIT(4) +#define BIT_SYS_CTRL1_OTP2XVOVR_EN BIT(3) +#define BIT_SYS_CTRL1_OTP2XAOVR_EN BIT(2) +#define BIT_SYS_CTRL1_TX_CTRL_HDMI BIT(1) +#define BIT_SYS_CTRL1_OTPAMUTEOVR_SET BIT(0) + +/* System Control DPD, default value: 0x90 */ +#define REG_DPD 0x000b +#define BIT_DPD_PWRON_PLL BIT(7) +#define BIT_DPD_PDNTX12 BIT(6) +#define BIT_DPD_PDNRX12 BIT(5) +#define BIT_DPD_OSC_EN BIT(4) +#define BIT_DPD_PWRON_HSIC BIT(3) +#define BIT_DPD_PDIDCK_N BIT(2) +#define BIT_DPD_PD_MHL_CLK_N BIT(1) + +/* Dual link Control, default value: 0x00 */ +#define REG_DCTL 0x000d +#define BIT_DCTL_TDM_LCLK_PHASE BIT(7) +#define BIT_DCTL_HSIC_CLK_PHASE BIT(6) +#define BIT_DCTL_CTS_TCK_PHASE BIT(5) +#define BIT_DCTL_EXT_DDC_SEL BIT(4) +#define BIT_DCTL_TRANSCODE BIT(3) +#define BIT_DCTL_HSIC_RX_STROBE_PHASE BIT(2) +#define BIT_DCTL_HSIC_TX_BIST_START_SEL BIT(1) +#define BIT_DCTL_TCLKNX_PHASE BIT(0) + +/* PWD Software Reset, default value: 0x20 */ +#define REG_PWD_SRST 0x000e +#define BIT_PWD_SRST_COC_DOC_RST BIT(7) +#define BIT_PWD_SRST_CBUS_RST_SW BIT(6) +#define BIT_PWD_SRST_CBUS_RST_SW_EN BIT(5) +#define BIT_PWD_SRST_MHLFIFO_RST BIT(4) +#define BIT_PWD_SRST_CBUS_RST BIT(3) +#define BIT_PWD_SRST_SW_RST_AUTO BIT(2) +#define BIT_PWD_SRST_HDCP2X_SW_RST BIT(1) +#define BIT_PWD_SRST_SW_RST BIT(0) + +/* AKSV_1, default value: 0x00 */ +#define REG_AKSV_1 0x001d + +/* Video H Resolution #1, default value: 0x00 */ +#define REG_H_RESL 0x003a + +/* Video Mode, default value: 0x00 */ +#define REG_VID_MODE 0x004a +#define BIT_VID_MODE_M1080P BIT(6) + +/* Video Input Mode, default value: 0xc0 */ +#define REG_VID_OVRRD 0x0051 +#define BIT_VID_OVRRD_PP_AUTO_DISABLE BIT(7) +#define BIT_VID_OVRRD_M1080P_OVRRD BIT(6) +#define BIT_VID_OVRRD_MINIVSYNC_ON BIT(5) +#define BIT_VID_OVRRD_3DCONV_EN_FRAME_PACK BIT(4) +#define BIT_VID_OVRRD_ENABLE_AUTO_PATH_EN BIT(3) +#define BIT_VID_OVRRD_ENRGB2YCBCR_OVRRD BIT(2) +#define BIT_VID_OVRRD_ENDOWNSAMPLE_OVRRD BIT(0) + +/* I2C Address reassignment, default value: 0x00 */ +#define REG_PAGE_MHLSPEC_ADDR 0x0057 +#define REG_PAGE7_ADDR 0x0058 +#define REG_PAGE8_ADDR 0x005c + +/* Fast Interrupt Status, default value: 0x00 */ +#define REG_FAST_INTR_STAT 0x005f +#define LEN_FAST_INTR_STAT 7 +#define BIT_FAST_INTR_STAT_TIMR 8 +#define BIT_FAST_INTR_STAT_INT2 9 +#define BIT_FAST_INTR_STAT_DDC 10 +#define BIT_FAST_INTR_STAT_SCDT 11 +#define BIT_FAST_INTR_STAT_INFR 13 +#define BIT_FAST_INTR_STAT_EDID 14 +#define BIT_FAST_INTR_STAT_HDCP 15 +#define BIT_FAST_INTR_STAT_MSC 16 +#define BIT_FAST_INTR_STAT_MERR 17 +#define BIT_FAST_INTR_STAT_G2WB 18 +#define BIT_FAST_INTR_STAT_G2WB_ERR 19 +#define BIT_FAST_INTR_STAT_DISC 28 +#define BIT_FAST_INTR_STAT_BLOCK 30 +#define BIT_FAST_INTR_STAT_LTRN 31 +#define BIT_FAST_INTR_STAT_HDCP2 32 +#define BIT_FAST_INTR_STAT_TDM 42 +#define BIT_FAST_INTR_STAT_COC 51 + +/* GPIO Control, default value: 0x15 */ +#define REG_GPIO_CTRL1 0x006e +#define BIT_CTRL1_GPIO_I_8 BIT(5) +#define BIT_CTRL1_GPIO_OEN_8 BIT(4) +#define BIT_CTRL1_GPIO_I_7 BIT(3) +#define BIT_CTRL1_GPIO_OEN_7 BIT(2) +#define BIT_CTRL1_GPIO_I_6 BIT(1) +#define BIT_CTRL1_GPIO_OEN_6 BIT(0) + +/* Interrupt Control, default value: 0x06 */ +#define REG_INT_CTRL 0x006f +#define BIT_INT_CTRL_SOFTWARE_WP BIT(7) +#define BIT_INT_CTRL_INTR_OD BIT(2) +#define BIT_INT_CTRL_INTR_POLARITY BIT(1) + +/* Interrupt State, default value: 0x00 */ +#define REG_INTR_STATE 0x0070 +#define BIT_INTR_STATE_INTR_STATE BIT(0) + +/* Interrupt Source #1, default value: 0x00 */ +#define REG_INTR1 0x0071 + +/* Interrupt Source #2, default value: 0x00 */ +#define REG_INTR2 0x0072 + +/* Interrupt Source #3, default value: 0x01 */ +#define REG_INTR3 0x0073 +#define BIT_DDC_CMD_DONE BIT(3) + +/* Interrupt Source #5, default value: 0x00 */ +#define REG_INTR5 0x0074 + +/* Interrupt #1 Mask, default value: 0x00 */ +#define REG_INTR1_MASK 0x0075 + +/* Interrupt #2 Mask, default value: 0x00 */ +#define REG_INTR2_MASK 0x0076 + +/* Interrupt #3 Mask, default value: 0x00 */ +#define REG_INTR3_MASK 0x0077 + +/* Interrupt #5 Mask, default value: 0x00 */ +#define REG_INTR5_MASK 0x0078 +#define BIT_INTR_SCDT_CHANGE BIT(0) + +/* Hot Plug Connection Control, default value: 0x45 */ +#define REG_HPD_CTRL 0x0079 +#define BIT_HPD_CTRL_HPD_DS_SIGNAL BIT(7) +#define BIT_HPD_CTRL_HPD_OUT_OD_EN BIT(6) +#define BIT_HPD_CTRL_HPD_HIGH BIT(5) +#define BIT_HPD_CTRL_HPD_OUT_OVR_EN BIT(4) +#define BIT_HPD_CTRL_GPIO_I_1 BIT(3) +#define BIT_HPD_CTRL_GPIO_OEN_1 BIT(2) +#define BIT_HPD_CTRL_GPIO_I_0 BIT(1) +#define BIT_HPD_CTRL_GPIO_OEN_0 BIT(0) + +/* GPIO Control, default value: 0x55 */ +#define REG_GPIO_CTRL 0x007a +#define BIT_CTRL_GPIO_I_5 BIT(7) +#define BIT_CTRL_GPIO_OEN_5 BIT(6) +#define BIT_CTRL_GPIO_I_4 BIT(5) +#define BIT_CTRL_GPIO_OEN_4 BIT(4) +#define BIT_CTRL_GPIO_I_3 BIT(3) +#define BIT_CTRL_GPIO_OEN_3 BIT(2) +#define BIT_CTRL_GPIO_I_2 BIT(1) +#define BIT_CTRL_GPIO_OEN_2 BIT(0) + +/* Interrupt Source 7, default value: 0x00 */ +#define REG_INTR7 0x007b + +/* Interrupt Source 8, default value: 0x00 */ +#define REG_INTR8 0x007c + +/* Interrupt #7 Mask, default value: 0x00 */ +#define REG_INTR7_MASK 0x007d + +/* Interrupt #8 Mask, default value: 0x00 */ +#define REG_INTR8_MASK 0x007e +#define BIT_CEA_NEW_VSI BIT(2) +#define BIT_CEA_NEW_AVI BIT(1) + +/* IEEE, default value: 0x10 */ +#define REG_TMDS_CCTRL 0x0080 +#define BIT_TMDS_CCTRL_TMDS_OE BIT(4) + +/* TMDS Control #4, default value: 0x02 */ +#define REG_TMDS_CTRL4 0x0085 +#define BIT_TMDS_CTRL4_SCDT_CKDT_SEL BIT(1) +#define BIT_TMDS_CTRL4_TX_EN_BY_SCDT BIT(0) + +/* BIST CNTL, default value: 0x00 */ +#define REG_BIST_CTRL 0x00bb +#define BIT_RXBIST_VGB_EN BIT(7) +#define BIT_TXBIST_VGB_EN BIT(6) +#define BIT_BIST_START_SEL BIT(5) +#define BIT_BIST_START_BIT BIT(4) +#define BIT_BIST_ALWAYS_ON BIT(3) +#define BIT_BIST_TRANS BIT(2) +#define BIT_BIST_RESET BIT(1) +#define BIT_BIST_EN BIT(0) + +/* BIST DURATION0, default value: 0x00 */ +#define REG_BIST_TEST_SEL 0x00bd +#define MSK_BIST_TEST_SEL_BIST_PATT_SEL 0x0f + +/* BIST VIDEO_MODE, default value: 0x00 */ +#define REG_BIST_VIDEO_MODE 0x00be +#define MSK_BIST_VIDEO_MODE_BIST_VIDEO_MODE_3_0 0x0f + +/* BIST DURATION0, default value: 0x00 */ +#define REG_BIST_DURATION_0 0x00bf + +/* BIST DURATION1, default value: 0x00 */ +#define REG_BIST_DURATION_1 0x00c0 + +/* BIST DURATION2, default value: 0x00 */ +#define REG_BIST_DURATION_2 0x00c1 + +/* BIST 8BIT_PATTERN, default value: 0x00 */ +#define REG_BIST_8BIT_PATTERN 0x00c2 + +/* LM DDC, default value: 0x80 */ +#define REG_LM_DDC 0x00c7 +#define BIT_LM_DDC_SW_TPI_EN_DISABLED BIT(7) + +#define BIT_LM_DDC_VIDEO_MUTE_EN BIT(5) +#define BIT_LM_DDC_DDC_TPI_SW BIT(2) +#define BIT_LM_DDC_DDC_GRANT BIT(1) +#define BIT_LM_DDC_DDC_GPU_REQUEST BIT(0) + +/* DDC I2C Manual, default value: 0x03 */ +#define REG_DDC_MANUAL 0x00ec +#define BIT_DDC_MANUAL_MAN_DDC BIT(7) +#define BIT_DDC_MANUAL_VP_SEL BIT(6) +#define BIT_DDC_MANUAL_DSDA BIT(5) +#define BIT_DDC_MANUAL_DSCL BIT(4) +#define BIT_DDC_MANUAL_GCP_HW_CTL_EN BIT(3) +#define BIT_DDC_MANUAL_DDCM_ABORT_WP BIT(2) +#define BIT_DDC_MANUAL_IO_DSDA BIT(1) +#define BIT_DDC_MANUAL_IO_DSCL BIT(0) + +/* DDC I2C Target Slave Address, default value: 0x00 */ +#define REG_DDC_ADDR 0x00ed +#define MSK_DDC_ADDR_DDC_ADDR 0xfe + +/* DDC I2C Target Segment Address, default value: 0x00 */ +#define REG_DDC_SEGM 0x00ee + +/* DDC I2C Target Offset Address, default value: 0x00 */ +#define REG_DDC_OFFSET 0x00ef + +/* DDC I2C Data In count #1, default value: 0x00 */ +#define REG_DDC_DIN_CNT1 0x00f0 + +/* DDC I2C Data In count #2, default value: 0x00 */ +#define REG_DDC_DIN_CNT2 0x00f1 +#define MSK_DDC_DIN_CNT2_DDC_DIN_CNT_9_8 0x03 + +/* DDC I2C Status, default value: 0x04 */ +#define REG_DDC_STATUS 0x00f2 +#define BIT_DDC_STATUS_DDC_BUS_LOW BIT(6) +#define BIT_DDC_STATUS_DDC_NO_ACK BIT(5) +#define BIT_DDC_STATUS_DDC_I2C_IN_PROG BIT(4) +#define BIT_DDC_STATUS_DDC_FIFO_FULL BIT(3) +#define BIT_DDC_STATUS_DDC_FIFO_EMPTY BIT(2) +#define BIT_DDC_STATUS_DDC_FIFO_READ_IN_SUE BIT(1) +#define BIT_DDC_STATUS_DDC_FIFO_WRITE_IN_USE BIT(0) + +/* DDC I2C Command, default value: 0x70 */ +#define REG_DDC_CMD 0x00f3 +#define BIT_DDC_CMD_HDCP_DDC_EN BIT(6) +#define BIT_DDC_CMD_SDA_DEL_EN BIT(5) +#define BIT_DDC_CMD_DDC_FLT_EN BIT(4) + +#define MSK_DDC_CMD_DDC_CMD 0x0f +#define VAL_DDC_CMD_ENH_DDC_READ_NO_ACK 0x04 +#define VAL_DDC_CMD_DDC_CMD_CLEAR_FIFO 0x09 +#define VAL_DDC_CMD_DDC_CMD_ABORT 0x0f + +/* DDC I2C FIFO Data In/Out, default value: 0x00 */ +#define REG_DDC_DATA 0x00f4 + +/* DDC I2C Data Out Counter, default value: 0x00 */ +#define REG_DDC_DOUT_CNT 0x00f5 +#define BIT_DDC_DOUT_CNT_DDC_DELAY_CNT_8 BIT(7) +#define MSK_DDC_DOUT_CNT_DDC_DATA_OUT_CNT 0x1f + +/* DDC I2C Delay Count, default value: 0x14 */ +#define REG_DDC_DELAY_CNT 0x00f6 + +/* Test Control, default value: 0x80 */ +#define REG_TEST_TXCTRL 0x00f7 +#define BIT_TEST_TXCTRL_RCLK_REF_SEL BIT(7) +#define BIT_TEST_TXCTRL_PCLK_REF_SEL BIT(6) +#define MSK_TEST_TXCTRL_BYPASS_PLL_CLK 0x3c +#define BIT_TEST_TXCTRL_HDMI_MODE BIT(1) +#define BIT_TEST_TXCTRL_TST_PLLCK BIT(0) + +/* CBUS Address, default value: 0x00 */ +#define REG_PAGE_CBUS_ADDR 0x00f8 + +/* I2C Device Address re-assignment */ +#define REG_PAGE1_ADDR 0x00fc +#define REG_PAGE2_ADDR 0x00fd +#define REG_PAGE3_ADDR 0x00fe +#define REG_HW_TPI_ADDR 0x00ff + +/* USBT CTRL0, default value: 0x00 */ +#define REG_UTSRST 0x0100 +#define BIT_UTSRST_FC_SRST BIT(5) +#define BIT_UTSRST_KEEPER_SRST BIT(4) +#define BIT_UTSRST_HTX_SRST BIT(3) +#define BIT_UTSRST_TRX_SRST BIT(2) +#define BIT_UTSRST_TTX_SRST BIT(1) +#define BIT_UTSRST_HRX_SRST BIT(0) + +/* HSIC RX Control3, default value: 0x07 */ +#define REG_HRXCTRL3 0x0104 +#define MSK_HRXCTRL3_HRX_AFFCTRL 0xf0 +#define BIT_HRXCTRL3_HRX_OUT_EN BIT(2) +#define BIT_HRXCTRL3_STATUS_EN BIT(1) +#define BIT_HRXCTRL3_HRX_STAY_RESET BIT(0) + +/* HSIC RX INT Registers */ +#define REG_HRXINTL 0x0111 +#define REG_HRXINTH 0x0112 + +/* TDM TX NUMBITS, default value: 0x0c */ +#define REG_TTXNUMB 0x0116 +#define MSK_TTXNUMB_TTX_AFFCTRL_3_0 0xf0 +#define BIT_TTXNUMB_TTX_COM1_AT_SYNC_WAIT BIT(3) +#define MSK_TTXNUMB_TTX_NUMBPS_2_0 0x07 + +/* TDM TX NUMSPISYM, default value: 0x04 */ +#define REG_TTXSPINUMS 0x0117 + +/* TDM TX NUMHSICSYM, default value: 0x14 */ +#define REG_TTXHSICNUMS 0x0118 + +/* TDM TX NUMTOTSYM, default value: 0x18 */ +#define REG_TTXTOTNUMS 0x0119 + +/* TDM TX INT Low, default value: 0x00 */ +#define REG_TTXINTL 0x0136 +#define BIT_TTXINTL_TTX_INTR7 BIT(7) +#define BIT_TTXINTL_TTX_INTR6 BIT(6) +#define BIT_TTXINTL_TTX_INTR5 BIT(5) +#define BIT_TTXINTL_TTX_INTR4 BIT(4) +#define BIT_TTXINTL_TTX_INTR3 BIT(3) +#define BIT_TTXINTL_TTX_INTR2 BIT(2) +#define BIT_TTXINTL_TTX_INTR1 BIT(1) +#define BIT_TTXINTL_TTX_INTR0 BIT(0) + +/* TDM TX INT High, default value: 0x00 */ +#define REG_TTXINTH 0x0137 +#define BIT_TTXINTH_TTX_INTR15 BIT(7) +#define BIT_TTXINTH_TTX_INTR14 BIT(6) +#define BIT_TTXINTH_TTX_INTR13 BIT(5) +#define BIT_TTXINTH_TTX_INTR12 BIT(4) +#define BIT_TTXINTH_TTX_INTR11 BIT(3) +#define BIT_TTXINTH_TTX_INTR10 BIT(2) +#define BIT_TTXINTH_TTX_INTR9 BIT(1) +#define BIT_TTXINTH_TTX_INTR8 BIT(0) + +/* TDM RX Control, default value: 0x1c */ +#define REG_TRXCTRL 0x013b +#define BIT_TRXCTRL_TRX_CLR_WVALLOW BIT(4) +#define BIT_TRXCTRL_TRX_FROM_SE_COC BIT(3) +#define MSK_TRXCTRL_TRX_NUMBPS_2_0 0x07 + +/* TDM RX NUMSPISYM, default value: 0x04 */ +#define REG_TRXSPINUMS 0x013c + +/* TDM RX NUMHSICSYM, default value: 0x14 */ +#define REG_TRXHSICNUMS 0x013d + +/* TDM RX NUMTOTSYM, default value: 0x18 */ +#define REG_TRXTOTNUMS 0x013e + +/* TDM RX Status 2nd, default value: 0x00 */ +#define REG_TRXSTA2 0x015c + +/* TDM RX INT Low, default value: 0x00 */ +#define REG_TRXINTL 0x0163 + +/* TDM RX INT High, default value: 0x00 */ +#define REG_TRXINTH 0x0164 + +/* TDM RX INTMASK High, default value: 0x00 */ +#define REG_TRXINTMH 0x0166 + +/* HSIC TX CRTL, default value: 0x00 */ +#define REG_HTXCTRL 0x0169 +#define BIT_HTXCTRL_HTX_ALLSBE_SOP BIT(4) +#define BIT_HTXCTRL_HTX_RGDINV_USB BIT(3) +#define BIT_HTXCTRL_HTX_RSPTDM_BUSY BIT(2) +#define BIT_HTXCTRL_HTX_DRVCONN1 BIT(1) +#define BIT_HTXCTRL_HTX_DRVRST1 BIT(0) + +/* HSIC TX INT Low, default value: 0x00 */ +#define REG_HTXINTL 0x017d + +/* HSIC TX INT High, default value: 0x00 */ +#define REG_HTXINTH 0x017e + +/* HSIC Keeper, default value: 0x00 */ +#define REG_KEEPER 0x0181 +#define MSK_KEEPER_KEEPER_MODE_1_0 0x03 + +/* HSIC Flow Control General, default value: 0x02 */ +#define REG_FCGC 0x0183 +#define BIT_FCGC_HSIC_FC_HOSTMODE BIT(1) +#define BIT_FCGC_HSIC_FC_ENABLE BIT(0) + +/* HSIC Flow Control CTR13, default value: 0xfc */ +#define REG_FCCTR13 0x0191 + +/* HSIC Flow Control CTR14, default value: 0xff */ +#define REG_FCCTR14 0x0192 + +/* HSIC Flow Control CTR15, default value: 0xff */ +#define REG_FCCTR15 0x0193 + +/* HSIC Flow Control CTR50, default value: 0x03 */ +#define REG_FCCTR50 0x01b6 + +/* HSIC Flow Control INTR0, default value: 0x00 */ +#define REG_FCINTR0 0x01ec +#define REG_FCINTR1 0x01ed +#define REG_FCINTR2 0x01ee +#define REG_FCINTR3 0x01ef +#define REG_FCINTR4 0x01f0 +#define REG_FCINTR5 0x01f1 +#define REG_FCINTR6 0x01f2 +#define REG_FCINTR7 0x01f3 + +/* TDM Low Latency, default value: 0x20 */ +#define REG_TDMLLCTL 0x01fc +#define MSK_TDMLLCTL_TRX_LL_SEL_MANUAL 0xc0 +#define MSK_TDMLLCTL_TRX_LL_SEL_MODE 0x30 +#define MSK_TDMLLCTL_TTX_LL_SEL_MANUAL 0x0c +#define BIT_TDMLLCTL_TTX_LL_TIE_LOW BIT(1) +#define BIT_TDMLLCTL_TTX_LL_SEL_MODE BIT(0) + +/* TMDS 0 Clock Control, default value: 0x10 */ +#define REG_TMDS0_CCTRL1 0x0210 +#define MSK_TMDS0_CCTRL1_TEST_SEL 0xc0 +#define MSK_TMDS0_CCTRL1_CLK1X_CTL 0x30 + +/* TMDS Clock Enable, default value: 0x00 */ +#define REG_TMDS_CLK_EN 0x0211 +#define BIT_TMDS_CLK_EN_CLK_EN BIT(0) + +/* TMDS Channel Enable, default value: 0x00 */ +#define REG_TMDS_CH_EN 0x0212 +#define BIT_TMDS_CH_EN_CH0_EN BIT(4) +#define BIT_TMDS_CH_EN_CH12_EN BIT(0) + +/* BGR_BIAS, default value: 0x07 */ +#define REG_BGR_BIAS 0x0215 +#define BIT_BGR_BIAS_BGR_EN BIT(7) +#define MSK_BGR_BIAS_BIAS_BGR_D 0x0f + +/* TMDS 0 Digital I2C BW, default value: 0x0a */ +#define REG_ALICE0_BW_I2C 0x0231 + +/* TMDS 0 Digital Zone Control, default value: 0xe0 */ +#define REG_ALICE0_ZONE_CTRL 0x024c +#define BIT_ALICE0_ZONE_CTRL_ICRST_N BIT(7) +#define BIT_ALICE0_ZONE_CTRL_USE_INT_DIV20 BIT(6) +#define MSK_ALICE0_ZONE_CTRL_SZONE_I2C 0x30 +#define MSK_ALICE0_ZONE_CTRL_ZONE_CTRL 0x0f + +/* TMDS 0 Digital PLL Mode Control, default value: 0x00 */ +#define REG_ALICE0_MODE_CTRL 0x024d +#define MSK_ALICE0_MODE_CTRL_PLL_MODE_I2C 0x0c +#define MSK_ALICE0_MODE_CTRL_DIV20_CTRL 0x03 + +/* MHL Tx Control 6th, default value: 0xa0 */ +#define REG_MHLTX_CTL6 0x0285 +#define MSK_MHLTX_CTL6_EMI_SEL 0xe0 +#define MSK_MHLTX_CTL6_TX_CLK_SHAPE_9_8 0x03 + +/* Packet Filter0, default value: 0x00 */ +#define REG_PKT_FILTER_0 0x0290 +#define BIT_PKT_FILTER_0_DROP_CEA_GAMUT_PKT BIT(7) +#define BIT_PKT_FILTER_0_DROP_CEA_CP_PKT BIT(6) +#define BIT_PKT_FILTER_0_DROP_MPEG_PKT BIT(5) +#define BIT_PKT_FILTER_0_DROP_SPIF_PKT BIT(4) +#define BIT_PKT_FILTER_0_DROP_AIF_PKT BIT(3) +#define BIT_PKT_FILTER_0_DROP_AVI_PKT BIT(2) +#define BIT_PKT_FILTER_0_DROP_CTS_PKT BIT(1) +#define BIT_PKT_FILTER_0_DROP_GCP_PKT BIT(0) + +/* Packet Filter1, default value: 0x00 */ +#define REG_PKT_FILTER_1 0x0291 +#define BIT_PKT_FILTER_1_VSI_OVERRIDE_DIS BIT(7) +#define BIT_PKT_FILTER_1_AVI_OVERRIDE_DIS BIT(6) +#define BIT_PKT_FILTER_1_DROP_AUDIO_PKT BIT(3) +#define BIT_PKT_FILTER_1_DROP_GEN2_PKT BIT(2) +#define BIT_PKT_FILTER_1_DROP_GEN_PKT BIT(1) +#define BIT_PKT_FILTER_1_DROP_VSIF_PKT BIT(0) + +/* TMDS Clock Status, default value: 0x10 */ +#define REG_TMDS_CSTAT_P3 0x02a0 +#define BIT_TMDS_CSTAT_P3_RX_HDMI_CP_CLR_MUTE BIT(7) +#define BIT_TMDS_CSTAT_P3_RX_HDMI_CP_SET_MUTE BIT(6) +#define BIT_TMDS_CSTAT_P3_RX_HDMI_CP_NEW_CP BIT(5) +#define BIT_TMDS_CSTAT_P3_CLR_AVI BIT(3) +#define BIT_TMDS_CSTAT_P3_SCDT_CLR_AVI_DIS BIT(2) +#define BIT_TMDS_CSTAT_P3_SCDT BIT(1) +#define BIT_TMDS_CSTAT_P3_CKDT BIT(0) + +/* RX_HDMI Control, default value: 0x10 */ +#define REG_RX_HDMI_CTRL0 0x02a1 +#define BIT_RX_HDMI_CTRL0_BYP_DVIFILT_SYNC BIT(5) +#define BIT_RX_HDMI_CTRL0_HDMI_MODE_EN_ITSELF_CLR BIT(4) +#define BIT_RX_HDMI_CTRL0_HDMI_MODE_SW_VALUE BIT(3) +#define BIT_RX_HDMI_CTRL0_HDMI_MODE_OVERWRITE BIT(2) +#define BIT_RX_HDMI_CTRL0_RX_HDMI_HDMI_MODE_EN BIT(1) +#define BIT_RX_HDMI_CTRL0_RX_HDMI_HDMI_MODE BIT(0) + +/* RX_HDMI Control, default value: 0x38 */ +#define REG_RX_HDMI_CTRL2 0x02a3 +#define MSK_RX_HDMI_CTRL2_IDLE_CNT 0xf0 +#define VAL_RX_HDMI_CTRL2_IDLE_CNT(n) ((n) << 4) +#define BIT_RX_HDMI_CTRL2_USE_AV_MUTE BIT(3) +#define BIT_RX_HDMI_CTRL2_VSI_MON_SEL_VSI BIT(0) + +/* RX_HDMI Control, default value: 0x0f */ +#define REG_RX_HDMI_CTRL3 0x02a4 +#define MSK_RX_HDMI_CTRL3_PP_MODE_CLK_EN 0x0f + +/* rx_hdmi Clear Buffer, default value: 0x00 */ +#define REG_RX_HDMI_CLR_BUFFER 0x02ac +#define MSK_RX_HDMI_CLR_BUFFER_AIF4VSI_CMP 0xc0 +#define BIT_RX_HDMI_CLR_BUFFER_USE_AIF4VSI BIT(5) +#define BIT_RX_HDMI_CLR_BUFFER_VSI_CLR_W_AVI BIT(4) +#define BIT_RX_HDMI_CLR_BUFFER_VSI_IEEE_ID_CHK_EN BIT(3) +#define BIT_RX_HDMI_CLR_BUFFER_SWAP_VSI_IEEE_ID BIT(2) +#define BIT_RX_HDMI_CLR_BUFFER_AIF_CLR_EN BIT(1) +#define BIT_RX_HDMI_CLR_BUFFER_VSI_CLR_EN BIT(0) + +/* RX_HDMI VSI Header1, default value: 0x00 */ +#define REG_RX_HDMI_MON_PKT_HEADER1 0x02b8 + +/* RX_HDMI VSI MHL Monitor, default value: 0x3c */ +#define REG_RX_HDMI_VSIF_MHL_MON 0x02d7 + +#define MSK_RX_HDMI_VSIF_MHL_MON_RX_HDMI_MHL_3D_FORMAT 0x3c +#define MSK_RX_HDMI_VSIF_MHL_MON_RX_HDMI_MHL_VID_FORMAT 0x03 + +/* Interrupt Source 9, default value: 0x00 */ +#define REG_INTR9 0x02e0 +#define BIT_INTR9_EDID_ERROR BIT(6) +#define BIT_INTR9_EDID_DONE BIT(5) +#define BIT_INTR9_DEVCAP_DONE BIT(4) + +/* Interrupt 9 Mask, default value: 0x00 */ +#define REG_INTR9_MASK 0x02e1 + +/* TPI CBUS Start, default value: 0x00 */ +#define REG_TPI_CBUS_START 0x02e2 +#define BIT_TPI_CBUS_START_RCP_REQ_START BIT(7) +#define BIT_TPI_CBUS_START_RCPK_REPLY_START BIT(6) +#define BIT_TPI_CBUS_START_RCPE_REPLY_START BIT(5) +#define BIT_TPI_CBUS_START_PUT_LINK_MODE_START BIT(4) +#define BIT_TPI_CBUS_START_PUT_DCAPCHG_START BIT(3) +#define BIT_TPI_CBUS_START_PUT_DCAPRDY_START BIT(2) +#define BIT_TPI_CBUS_START_GET_EDID_START_0 BIT(1) +#define BIT_TPI_CBUS_START_GET_DEVCAP_START BIT(0) + +/* EDID Control, default value: 0x10 */ +#define REG_EDID_CTRL 0x02e3 +#define BIT_EDID_CTRL_EDID_PRIME_VALID BIT(7) +#define BIT_EDID_CTRL_XDEVCAP_EN BIT(6) +#define BIT_EDID_CTRL_DEVCAP_SELECT_DEVCAP BIT(5) +#define BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO BIT(4) +#define BIT_EDID_CTRL_EDID_FIFO_ACCESS_ALWAYS_EN BIT(3) +#define BIT_EDID_CTRL_EDID_FIFO_BLOCK_SEL BIT(2) +#define BIT_EDID_CTRL_INVALID_BKSV BIT(1) +#define BIT_EDID_CTRL_EDID_MODE_EN BIT(0) + +/* EDID FIFO Addr, default value: 0x00 */ +#define REG_EDID_FIFO_ADDR 0x02e9 + +/* EDID FIFO Write Data, default value: 0x00 */ +#define REG_EDID_FIFO_WR_DATA 0x02ea + +/* EDID/DEVCAP FIFO Internal Addr, default value: 0x00 */ +#define REG_EDID_FIFO_ADDR_MON 0x02eb + +/* EDID FIFO Read Data, default value: 0x00 */ +#define REG_EDID_FIFO_RD_DATA 0x02ec + +/* EDID DDC Segment Pointer, default value: 0x00 */ +#define REG_EDID_START_EXT 0x02ed + +/* TX IP BIST CNTL and Status, default value: 0x00 */ +#define REG_TX_IP_BIST_CNTLSTA 0x02f2 +#define BIT_TX_IP_BIST_CNTLSTA_TXBIST_QUARTER_CLK_SEL BIT(6) +#define BIT_TX_IP_BIST_CNTLSTA_TXBIST_DONE BIT(5) +#define BIT_TX_IP_BIST_CNTLSTA_TXBIST_ON BIT(4) +#define BIT_TX_IP_BIST_CNTLSTA_TXBIST_RUN BIT(3) +#define BIT_TX_IP_BIST_CNTLSTA_TXCLK_HALF_SEL BIT(2) +#define BIT_TX_IP_BIST_CNTLSTA_TXBIST_EN BIT(1) +#define BIT_TX_IP_BIST_CNTLSTA_TXBIST_SEL BIT(0) + +/* TX IP BIST INST LOW, default value: 0x00 */ +#define REG_TX_IP_BIST_INST_LOW 0x02f3 +#define REG_TX_IP_BIST_INST_HIGH 0x02f4 + +/* TX IP BIST PATTERN LOW, default value: 0x00 */ +#define REG_TX_IP_BIST_PAT_LOW 0x02f5 +#define REG_TX_IP_BIST_PAT_HIGH 0x02f6 + +/* TX IP BIST CONFIGURE LOW, default value: 0x00 */ +#define REG_TX_IP_BIST_CONF_LOW 0x02f7 +#define REG_TX_IP_BIST_CONF_HIGH 0x02f8 + +/* E-MSC General Control, default value: 0x80 */ +#define REG_GENCTL 0x0300 +#define BIT_GENCTL_SPEC_TRANS_DIS BIT(7) +#define BIT_GENCTL_DIS_XMIT_ERR_STATE BIT(6) +#define BIT_GENCTL_SPI_MISO_EDGE BIT(5) +#define BIT_GENCTL_SPI_MOSI_EDGE BIT(4) +#define BIT_GENCTL_CLR_EMSC_RFIFO BIT(3) +#define BIT_GENCTL_CLR_EMSC_XFIFO BIT(2) +#define BIT_GENCTL_START_TRAIN_SEQ BIT(1) +#define BIT_GENCTL_EMSC_EN BIT(0) + +/* E-MSC Comma ErrorCNT, default value: 0x03 */ +#define REG_COMMECNT 0x0305 +#define BIT_COMMECNT_I2C_TO_EMSC_EN BIT(7) +#define MSK_COMMECNT_COMMA_CHAR_ERR_CNT 0x0f + +/* E-MSC RFIFO ByteCnt, default value: 0x00 */ +#define REG_EMSCRFIFOBCNTL 0x031a +#define REG_EMSCRFIFOBCNTH 0x031b + +/* SPI Burst Cnt Status, default value: 0x00 */ +#define REG_SPIBURSTCNT 0x031e + +/* SPI Burst Status and SWRST, default value: 0x00 */ +#define REG_SPIBURSTSTAT 0x0322 +#define BIT_SPIBURSTSTAT_SPI_HDCPRST BIT(7) +#define BIT_SPIBURSTSTAT_SPI_CBUSRST BIT(6) +#define BIT_SPIBURSTSTAT_SPI_SRST BIT(5) +#define BIT_SPIBURSTSTAT_EMSC_NORMAL_MODE BIT(0) + +/* E-MSC 1st Interrupt, default value: 0x00 */ +#define REG_EMSCINTR 0x0323 +#define BIT_EMSCINTR_EMSC_XFIFO_EMPTY BIT(7) +#define BIT_EMSCINTR_EMSC_XMIT_ACK_TOUT BIT(6) +#define BIT_EMSCINTR_EMSC_RFIFO_READ_ERR BIT(5) +#define BIT_EMSCINTR_EMSC_XFIFO_WRITE_ERR BIT(4) +#define BIT_EMSCINTR_EMSC_COMMA_CHAR_ERR BIT(3) +#define BIT_EMSCINTR_EMSC_XMIT_DONE BIT(2) +#define BIT_EMSCINTR_EMSC_XMIT_GNT_TOUT BIT(1) +#define BIT_EMSCINTR_SPI_DVLD BIT(0) + +/* E-MSC Interrupt Mask, default value: 0x00 */ +#define REG_EMSCINTRMASK 0x0324 + +/* I2C E-MSC XMIT FIFO Write Port, default value: 0x00 */ +#define REG_EMSC_XMIT_WRITE_PORT 0x032a + +/* I2C E-MSC RCV FIFO Write Port, default value: 0x00 */ +#define REG_EMSC_RCV_READ_PORT 0x032b + +/* E-MSC 2nd Interrupt, default value: 0x00 */ +#define REG_EMSCINTR1 0x032c +#define BIT_EMSCINTR1_EMSC_TRAINING_COMMA_ERR BIT(0) + +/* E-MSC Interrupt Mask, default value: 0x00 */ +#define REG_EMSCINTRMASK1 0x032d +#define BIT_EMSCINTRMASK1_EMSC_INTRMASK1_0 BIT(0) + +/* MHL Top Ctl, default value: 0x00 */ +#define REG_MHL_TOP_CTL 0x0330 +#define BIT_MHL_TOP_CTL_MHL3_DOC_SEL BIT(7) +#define BIT_MHL_TOP_CTL_MHL_PP_SEL BIT(6) +#define MSK_MHL_TOP_CTL_IF_TIMING_CTL 0x03 + +/* MHL DataPath 1st Ctl, default value: 0xbc */ +#define REG_MHL_DP_CTL0 0x0331 +#define BIT_MHL_DP_CTL0_DP_OE BIT(7) +#define BIT_MHL_DP_CTL0_TX_OE_OVR BIT(6) +#define MSK_MHL_DP_CTL0_TX_OE 0x3f + +/* MHL DataPath 2nd Ctl, default value: 0xbb */ +#define REG_MHL_DP_CTL1 0x0332 +#define MSK_MHL_DP_CTL1_CK_SWING_CTL 0xf0 +#define MSK_MHL_DP_CTL1_DT_SWING_CTL 0x0f + +/* MHL DataPath 3rd Ctl, default value: 0x2f */ +#define REG_MHL_DP_CTL2 0x0333 +#define BIT_MHL_DP_CTL2_CLK_BYPASS_EN BIT(7) +#define MSK_MHL_DP_CTL2_DAMP_TERM_SEL 0x30 +#define MSK_MHL_DP_CTL2_CK_TERM_SEL 0x0c +#define MSK_MHL_DP_CTL2_DT_TERM_SEL 0x03 + +/* MHL DataPath 4th Ctl, default value: 0x48 */ +#define REG_MHL_DP_CTL3 0x0334 +#define MSK_MHL_DP_CTL3_DT_DRV_VNBC_CTL 0xf0 +#define MSK_MHL_DP_CTL3_DT_DRV_VNB_CTL 0x0f + +/* MHL DataPath 5th Ctl, default value: 0x48 */ +#define REG_MHL_DP_CTL4 0x0335 +#define MSK_MHL_DP_CTL4_CK_DRV_VNBC_CTL 0xf0 +#define MSK_MHL_DP_CTL4_CK_DRV_VNB_CTL 0x0f + +/* MHL DataPath 6th Ctl, default value: 0x3f */ +#define REG_MHL_DP_CTL5 0x0336 +#define BIT_MHL_DP_CTL5_RSEN_EN_OVR BIT(7) +#define BIT_MHL_DP_CTL5_RSEN_EN BIT(6) +#define MSK_MHL_DP_CTL5_DAMP_TERM_VGS_CTL 0x30 +#define MSK_MHL_DP_CTL5_CK_TERM_VGS_CTL 0x0c +#define MSK_MHL_DP_CTL5_DT_TERM_VGS_CTL 0x03 + +/* MHL PLL 1st Ctl, default value: 0x05 */ +#define REG_MHL_PLL_CTL0 0x0337 +#define BIT_MHL_PLL_CTL0_AUD_CLK_EN BIT(7) + +#define MSK_MHL_PLL_CTL0_AUD_CLK_RATIO 0x70 +#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_10 0x70 +#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_6 0x60 +#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_4 0x50 +#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_2 0x40 +#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_5 0x30 +#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_3 0x20 +#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_2_PRIME 0x10 +#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_1 0x00 + +#define MSK_MHL_PLL_CTL0_HDMI_CLK_RATIO 0x0c +#define VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_4X 0x0c +#define VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_2X 0x08 +#define VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_1X 0x04 +#define VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_HALF_X 0x00 + +#define BIT_MHL_PLL_CTL0_CRYSTAL_CLK_SEL BIT(1) +#define BIT_MHL_PLL_CTL0_ZONE_MASK_OE BIT(0) + +/* MHL PLL 3rd Ctl, default value: 0x80 */ +#define REG_MHL_PLL_CTL2 0x0339 +#define BIT_MHL_PLL_CTL2_CLKDETECT_EN BIT(7) +#define BIT_MHL_PLL_CTL2_MEAS_FVCO BIT(3) +#define BIT_MHL_PLL_CTL2_PLL_FAST_LOCK BIT(2) +#define MSK_MHL_PLL_CTL2_PLL_LF_SEL 0x03 + +/* MHL CBUS 1st Ctl, default value: 0x12 */ +#define REG_MHL_CBUS_CTL0 0x0340 +#define BIT_MHL_CBUS_CTL0_CBUS_RGND_TEST_MODE BIT(7) + +#define MSK_MHL_CBUS_CTL0_CBUS_RGND_VTH_CTL 0x30 +#define VAL_MHL_CBUS_CTL0_CBUS_RGND_VBIAS_734 0x00 +#define VAL_MHL_CBUS_CTL0_CBUS_RGND_VBIAS_747 0x10 +#define VAL_MHL_CBUS_CTL0_CBUS_RGND_VBIAS_740 0x20 +#define VAL_MHL_CBUS_CTL0_CBUS_RGND_VBIAS_754 0x30 + +#define MSK_MHL_CBUS_CTL0_CBUS_RES_TEST_SEL 0x0c + +#define MSK_MHL_CBUS_CTL0_CBUS_DRV_SEL 0x03 +#define VAL_MHL_CBUS_CTL0_CBUS_DRV_SEL_WEAKEST 0x00 +#define VAL_MHL_CBUS_CTL0_CBUS_DRV_SEL_WEAK 0x01 +#define VAL_MHL_CBUS_CTL0_CBUS_DRV_SEL_STRONG 0x02 +#define VAL_MHL_CBUS_CTL0_CBUS_DRV_SEL_STRONGEST 0x03 + +/* MHL CBUS 2nd Ctl, default value: 0x03 */ +#define REG_MHL_CBUS_CTL1 0x0341 +#define MSK_MHL_CBUS_CTL1_CBUS_RGND_RES_CTL 0x07 +#define VAL_MHL_CBUS_CTL1_0888_OHM 0x00 +#define VAL_MHL_CBUS_CTL1_1115_OHM 0x04 +#define VAL_MHL_CBUS_CTL1_1378_OHM 0x07 + +/* MHL CoC 1st Ctl, default value: 0xc3 */ +#define REG_MHL_COC_CTL0 0x0342 +#define BIT_MHL_COC_CTL0_COC_BIAS_EN BIT(7) +#define MSK_MHL_COC_CTL0_COC_BIAS_CTL 0x70 +#define MSK_MHL_COC_CTL0_COC_TERM_CTL 0x07 + +/* MHL CoC 2nd Ctl, default value: 0x87 */ +#define REG_MHL_COC_CTL1 0x0343 +#define BIT_MHL_COC_CTL1_COC_EN BIT(7) +#define MSK_MHL_COC_CTL1_COC_DRV_CTL 0x3f + +/* MHL CoC 4th Ctl, default value: 0x00 */ +#define REG_MHL_COC_CTL3 0x0345 +#define BIT_MHL_COC_CTL3_COC_AECHO_EN BIT(0) + +/* MHL CoC 5th Ctl, default value: 0x28 */ +#define REG_MHL_COC_CTL4 0x0346 +#define MSK_MHL_COC_CTL4_COC_IF_CTL 0xf0 +#define MSK_MHL_COC_CTL4_COC_SLEW_CTL 0x0f + +/* MHL CoC 6th Ctl, default value: 0x0d */ +#define REG_MHL_COC_CTL5 0x0347 + +/* MHL DoC 1st Ctl, default value: 0x18 */ +#define REG_MHL_DOC_CTL0 0x0349 +#define BIT_MHL_DOC_CTL0_DOC_RXDATA_EN BIT(7) +#define MSK_MHL_DOC_CTL0_DOC_DM_TERM 0x38 +#define MSK_MHL_DOC_CTL0_DOC_OPMODE 0x06 +#define BIT_MHL_DOC_CTL0_DOC_RXBIAS_EN BIT(0) + +/* MHL DataPath 7th Ctl, default value: 0x2a */ +#define REG_MHL_DP_CTL6 0x0350 +#define BIT_MHL_DP_CTL6_DP_TAP2_SGN BIT(5) +#define BIT_MHL_DP_CTL6_DP_TAP2_EN BIT(4) +#define BIT_MHL_DP_CTL6_DP_TAP1_SGN BIT(3) +#define BIT_MHL_DP_CTL6_DP_TAP1_EN BIT(2) +#define BIT_MHL_DP_CTL6_DT_PREDRV_FEEDCAP_EN BIT(1) +#define BIT_MHL_DP_CTL6_DP_PRE_POST_SEL BIT(0) + +/* MHL DataPath 8th Ctl, default value: 0x06 */ +#define REG_MHL_DP_CTL7 0x0351 +#define MSK_MHL_DP_CTL7_DT_DRV_VBIAS_CASCTL 0xf0 +#define MSK_MHL_DP_CTL7_DT_DRV_IREF_CTL 0x0f + +/* Tx Zone Ctl1, default value: 0x00 */ +#define REG_TX_ZONE_CTL1 0x0361 +#define VAL_TX_ZONE_CTL1_TX_ZONE_CTRL_MODE 0x08 + +/* MHL3 Tx Zone Ctl, default value: 0x00 */ +#define REG_MHL3_TX_ZONE_CTL 0x0364 +#define BIT_MHL3_TX_ZONE_CTL_MHL2_INTPLT_ZONE_MANU_EN BIT(7) +#define MSK_MHL3_TX_ZONE_CTL_MHL3_TX_ZONE 0x03 + +#define MSK_TX_ZONE_CTL3_TX_ZONE 0x03 +#define VAL_TX_ZONE_CTL3_TX_ZONE_6GBPS 0x00 +#define VAL_TX_ZONE_CTL3_TX_ZONE_3GBPS 0x01 +#define VAL_TX_ZONE_CTL3_TX_ZONE_1_5GBPS 0x02 + +/* HDCP Polling Control and Status, default value: 0x70 */ +#define REG_HDCP2X_POLL_CS 0x0391 + +#define BIT_HDCP2X_POLL_CS_HDCP2X_MSG_SZ_CLR_OPTION BIT(6) +#define BIT_HDCP2X_POLL_CS_HDCP2X_RPT_READY_CLR_OPTION BIT(5) +#define BIT_HDCP2X_POLL_CS_HDCP2X_REAUTH_REQ_CLR_OPTION BIT(4) +#define MSK_HDCP2X_POLL_CS_ 0x0c +#define BIT_HDCP2X_POLL_CS_HDCP2X_DIS_POLL_GNT BIT(1) +#define BIT_HDCP2X_POLL_CS_HDCP2X_DIS_POLL_EN BIT(0) + +/* HDCP Interrupt 0, default value: 0x00 */ +#define REG_HDCP2X_INTR0 0x0398 + +/* HDCP Interrupt 0 Mask, default value: 0x00 */ +#define REG_HDCP2X_INTR0_MASK 0x0399 + +/* HDCP General Control 0, default value: 0x02 */ +#define REG_HDCP2X_CTRL_0 0x03a0 +#define BIT_HDCP2X_CTRL_0_HDCP2X_ENCRYPT_EN BIT(7) +#define BIT_HDCP2X_CTRL_0_HDCP2X_POLINT_SEL BIT(6) +#define BIT_HDCP2X_CTRL_0_HDCP2X_POLINT_OVR BIT(5) +#define BIT_HDCP2X_CTRL_0_HDCP2X_PRECOMPUTE BIT(4) +#define BIT_HDCP2X_CTRL_0_HDCP2X_HDMIMODE BIT(3) +#define BIT_HDCP2X_CTRL_0_HDCP2X_REPEATER BIT(2) +#define BIT_HDCP2X_CTRL_0_HDCP2X_HDCPTX BIT(1) +#define BIT_HDCP2X_CTRL_0_HDCP2X_EN BIT(0) + +/* HDCP General Control 1, default value: 0x08 */ +#define REG_HDCP2X_CTRL_1 0x03a1 +#define MSK_HDCP2X_CTRL_1_HDCP2X_REAUTH_MSK_3_0 0xf0 +#define BIT_HDCP2X_CTRL_1_HDCP2X_HPD_SW BIT(3) +#define BIT_HDCP2X_CTRL_1_HDCP2X_HPD_OVR BIT(2) +#define BIT_HDCP2X_CTRL_1_HDCP2X_CTL3MSK BIT(1) +#define BIT_HDCP2X_CTRL_1_HDCP2X_REAUTH_SW BIT(0) + +/* HDCP Misc Control, default value: 0x00 */ +#define REG_HDCP2X_MISC_CTRL 0x03a5 +#define BIT_HDCP2X_MISC_CTRL_HDCP2X_RPT_SMNG_XFER_START BIT(4) +#define BIT_HDCP2X_MISC_CTRL_HDCP2X_RPT_SMNG_WR_START BIT(3) +#define BIT_HDCP2X_MISC_CTRL_HDCP2X_RPT_SMNG_WR BIT(2) +#define BIT_HDCP2X_MISC_CTRL_HDCP2X_RPT_RCVID_RD_START BIT(1) +#define BIT_HDCP2X_MISC_CTRL_HDCP2X_RPT_RCVID_RD BIT(0) + +/* HDCP RPT SMNG K, default value: 0x00 */ +#define REG_HDCP2X_RPT_SMNG_K 0x03a6 + +/* HDCP RPT SMNG In, default value: 0x00 */ +#define REG_HDCP2X_RPT_SMNG_IN 0x03a7 + +/* HDCP Auth Status, default value: 0x00 */ +#define REG_HDCP2X_AUTH_STAT 0x03aa + +/* HDCP RPT RCVID Out, default value: 0x00 */ +#define REG_HDCP2X_RPT_RCVID_OUT 0x03ac + +/* HDCP TP1, default value: 0x62 */ +#define REG_HDCP2X_TP1 0x03b4 + +/* HDCP GP Out 0, default value: 0x00 */ +#define REG_HDCP2X_GP_OUT0 0x03c7 + +/* HDCP Repeater RCVR ID 0, default value: 0x00 */ +#define REG_HDCP2X_RPT_RCVR_ID0 0x03d1 + +/* HDCP DDCM Status, default value: 0x00 */ +#define REG_HDCP2X_DDCM_STS 0x03d8 +#define MSK_HDCP2X_DDCM_STS_HDCP2X_DDCM_ERR_STS_3_0 0xf0 +#define MSK_HDCP2X_DDCM_STS_HDCP2X_DDCM_CTL_CS_3_0 0x0f + +/* HDMI2MHL3 Control, default value: 0x0a */ +#define REG_M3_CTRL 0x03e0 +#define BIT_M3_CTRL_H2M_SWRST BIT(4) +#define BIT_M3_CTRL_SW_MHL3_SEL BIT(3) +#define BIT_M3_CTRL_M3AV_EN BIT(2) +#define BIT_M3_CTRL_ENC_TMDS BIT(1) +#define BIT_M3_CTRL_MHL3_MASTER_EN BIT(0) + +#define VAL_M3_CTRL_MHL1_2_VALUE (BIT_M3_CTRL_SW_MHL3_SEL \ + | BIT_M3_CTRL_ENC_TMDS) +#define VAL_M3_CTRL_MHL3_VALUE (BIT_M3_CTRL_SW_MHL3_SEL \ + | BIT_M3_CTRL_M3AV_EN \ + | BIT_M3_CTRL_ENC_TMDS \ + | BIT_M3_CTRL_MHL3_MASTER_EN) + +/* HDMI2MHL3 Port0 Control, default value: 0x04 */ +#define REG_M3_P0CTRL 0x03e1 +#define BIT_M3_P0CTRL_MHL3_P0_HDCP_ENC_EN BIT(4) +#define BIT_M3_P0CTRL_MHL3_P0_UNLIMIT_EN BIT(3) +#define BIT_M3_P0CTRL_MHL3_P0_HDCP_EN BIT(2) +#define BIT_M3_P0CTRL_MHL3_P0_PIXEL_MODE_PACKED BIT(1) +#define BIT_M3_P0CTRL_MHL3_P0_PORT_EN BIT(0) + +#define REG_M3_POSTM 0x03e2 +#define MSK_M3_POSTM_RRP_DECODE 0xf8 +#define MSK_M3_POSTM_MHL3_P0_STM_ID 0x07 + +/* HDMI2MHL3 Scramble Control, default value: 0x41 */ +#define REG_M3_SCTRL 0x03e6 +#define MSK_M3_SCTRL_MHL3_SR_LENGTH 0xf0 +#define BIT_M3_SCTRL_MHL3_SCRAMBLER_EN BIT(0) + +/* HSIC Div Ctl, default value: 0x05 */ +#define REG_DIV_CTL_MAIN 0x03f2 +#define MSK_DIV_CTL_MAIN_PRE_DIV_CTL_MAIN 0x1c +#define MSK_DIV_CTL_MAIN_FB_DIV_CTL_MAIN 0x03 + +/* MHL Capability 1st Byte, default value: 0x00 */ +#define REG_MHL_DEVCAP_0 0x0400 + +/* MHL Interrupt 1st Byte, default value: 0x00 */ +#define REG_MHL_INT_0 0x0420 + +/* Device Status 1st byte, default value: 0x00 */ +#define REG_MHL_STAT_0 0x0430 + +/* CBUS Scratch Pad 1st Byte, default value: 0x00 */ +#define REG_MHL_SCRPAD_0 0x0440 + +/* MHL Extended Capability 1st Byte, default value: 0x00 */ +#define REG_MHL_EXTDEVCAP_0 0x0480 + +/* Device Extended Status 1st byte, default value: 0x00 */ +#define REG_MHL_EXTSTAT_0 0x0490 + +/* TPI DTD Byte2, default value: 0x00 */ +#define REG_TPI_DTD_B2 0x0602 + +#define VAL_TPI_QUAN_RANGE_LIMITED 0x01 +#define VAL_TPI_QUAN_RANGE_FULL 0x02 +#define VAL_TPI_FORMAT_RGB 0x00 +#define VAL_TPI_FORMAT_YCBCR444 0x01 +#define VAL_TPI_FORMAT_YCBCR422 0x02 +#define VAL_TPI_FORMAT_INTERNAL_RGB 0x03 +#define VAL_TPI_FORMAT(_fmt, _qr) \ + (VAL_TPI_FORMAT_##_fmt | (VAL_TPI_QUAN_RANGE_##_qr << 2)) + +/* Input Format, default value: 0x00 */ +#define REG_TPI_INPUT 0x0609 +#define BIT_TPI_INPUT_EXTENDEDBITMODE BIT(7) +#define BIT_TPI_INPUT_ENDITHER BIT(6) +#define MSK_TPI_INPUT_INPUT_QUAN_RANGE 0x0c +#define MSK_TPI_INPUT_INPUT_FORMAT 0x03 + +/* Output Format, default value: 0x00 */ +#define REG_TPI_OUTPUT 0x060a +#define BIT_TPI_OUTPUT_CSCMODE709 BIT(4) +#define MSK_TPI_OUTPUT_OUTPUT_QUAN_RANGE 0x0c +#define MSK_TPI_OUTPUT_OUTPUT_FORMAT 0x03 + +/* TPI AVI Check Sum, default value: 0x00 */ +#define REG_TPI_AVI_CHSUM 0x060c + +/* TPI System Control, default value: 0x00 */ +#define REG_TPI_SC 0x061a +#define BIT_TPI_SC_TPI_UPDATE_FLG BIT(7) +#define BIT_TPI_SC_TPI_REAUTH_CTL BIT(6) +#define BIT_TPI_SC_TPI_OUTPUT_MODE_1 BIT(5) +#define BIT_TPI_SC_REG_TMDS_OE_POWER_DOWN BIT(4) +#define BIT_TPI_SC_TPI_AV_MUTE BIT(3) +#define BIT_TPI_SC_DDC_GPU_REQUEST BIT(2) +#define BIT_TPI_SC_DDC_TPI_SW BIT(1) +#define BIT_TPI_SC_TPI_OUTPUT_MODE_0_HDMI BIT(0) + +/* TPI COPP Query Data, default value: 0x00 */ +#define REG_TPI_COPP_DATA1 0x0629 +#define BIT_TPI_COPP_DATA1_COPP_GPROT BIT(7) +#define BIT_TPI_COPP_DATA1_COPP_LPROT BIT(6) +#define MSK_TPI_COPP_DATA1_COPP_LINK_STATUS 0x30 +#define VAL_TPI_COPP_LINK_STATUS_NORMAL 0x00 +#define VAL_TPI_COPP_LINK_STATUS_LINK_LOST 0x10 +#define VAL_TPI_COPP_LINK_STATUS_RENEGOTIATION_REQ 0x20 +#define VAL_TPI_COPP_LINK_STATUS_LINK_SUSPENDED 0x30 +#define BIT_TPI_COPP_DATA1_COPP_HDCP_REP BIT(3) +#define BIT_TPI_COPP_DATA1_COPP_CONNTYPE_0 BIT(2) +#define BIT_TPI_COPP_DATA1_COPP_PROTYPE BIT(1) +#define BIT_TPI_COPP_DATA1_COPP_CONNTYPE_1 BIT(0) + +/* TPI COPP Control Data, default value: 0x00 */ +#define REG_TPI_COPP_DATA2 0x062a +#define BIT_TPI_COPP_DATA2_INTR_ENCRYPTION BIT(5) +#define BIT_TPI_COPP_DATA2_KSV_FORWARD BIT(4) +#define BIT_TPI_COPP_DATA2_INTERM_RI_CHECK_EN BIT(3) +#define BIT_TPI_COPP_DATA2_DOUBLE_RI_CHECK BIT(2) +#define BIT_TPI_COPP_DATA2_DDC_SHORT_RI_RD BIT(1) +#define BIT_TPI_COPP_DATA2_COPP_PROTLEVEL BIT(0) + +/* TPI Interrupt Enable, default value: 0x00 */ +#define REG_TPI_INTR_EN 0x063c + +/* TPI Interrupt Status Low Byte, default value: 0x00 */ +#define REG_TPI_INTR_ST0 0x063d +#define BIT_TPI_INTR_ST0_TPI_AUTH_CHNGE_STAT BIT(7) +#define BIT_TPI_INTR_ST0_TPI_V_RDY_STAT BIT(6) +#define BIT_TPI_INTR_ST0_TPI_COPP_CHNGE_STAT BIT(5) +#define BIT_TPI_INTR_ST0_KSV_FIFO_FIRST_STAT BIT(3) +#define BIT_TPI_INTR_ST0_READ_BKSV_BCAPS_DONE_STAT BIT(2) +#define BIT_TPI_INTR_ST0_READ_BKSV_BCAPS_ERR_STAT BIT(1) +#define BIT_TPI_INTR_ST0_READ_BKSV_ERR_STAT BIT(0) + +/* TPI DS BCAPS Status, default value: 0x00 */ +#define REG_TPI_DS_BCAPS 0x0644 + +/* TPI BStatus1, default value: 0x00 */ +#define REG_TPI_BSTATUS1 0x0645 +#define BIT_TPI_BSTATUS1_DS_DEV_EXCEED BIT(7) +#define MSK_TPI_BSTATUS1_DS_DEV_CNT 0x7f + +/* TPI BStatus2, default value: 0x10 */ +#define REG_TPI_BSTATUS2 0x0646 +#define MSK_TPI_BSTATUS2_DS_BSTATUS 0xe0 +#define BIT_TPI_BSTATUS2_DS_HDMI_MODE BIT(4) +#define BIT_TPI_BSTATUS2_DS_CASC_EXCEED BIT(3) +#define MSK_TPI_BSTATUS2_DS_DEPTH 0x07 + +/* TPI HW Optimization Control #3, default value: 0x00 */ +#define REG_TPI_HW_OPT3 0x06bb +#define BIT_TPI_HW_OPT3_DDC_DEBUG BIT(7) +#define BIT_TPI_HW_OPT3_RI_CHECK_SKIP BIT(3) +#define BIT_TPI_HW_OPT3_TPI_DDC_BURST_MODE BIT(2) +#define MSK_TPI_HW_OPT3_TPI_DDC_REQ_LEVEL 0x03 + +/* TPI Info Frame Select, default value: 0x00 */ +#define REG_TPI_INFO_FSEL 0x06bf +#define BIT_TPI_INFO_FSEL_TPI_INFO_EN BIT(7) +#define BIT_TPI_INFO_FSEL_TPI_INFO_RPT BIT(6) +#define BIT_TPI_INFO_FSEL_TPI_INFO_READ_FLAG BIT(5) +#define MSK_TPI_INFO_FSEL_TPI_INFO_SEL 0x07 + +/* TPI Info Byte #0, default value: 0x00 */ +#define REG_TPI_INFO_B0 0x06c0 + +/* CoC Status, default value: 0x00 */ +#define REG_COC_STAT_0 0x0700 +#define REG_COC_STAT_1 0x0701 +#define REG_COC_STAT_2 0x0702 +#define REG_COC_STAT_3 0x0703 +#define REG_COC_STAT_4 0x0704 +#define REG_COC_STAT_5 0x0705 + +/* CoC 1st Ctl, default value: 0x40 */ +#define REG_COC_CTL0 0x0710 + +/* CoC 2nd Ctl, default value: 0x0a */ +#define REG_COC_CTL1 0x0711 +#define MSK_COC_CTL1_COC_CTRL1_7_6 0xc0 +#define MSK_COC_CTL1_COC_CTRL1_5_0 0x3f + +/* CoC 3rd Ctl, default value: 0x14 */ +#define REG_COC_CTL2 0x0712 +#define MSK_COC_CTL2_COC_CTRL2_7_6 0xc0 +#define MSK_COC_CTL2_COC_CTRL2_5_0 0x3f + +/* CoC 4th Ctl, default value: 0x40 */ +#define REG_COC_CTL3 0x0713 +#define BIT_COC_CTL3_COC_CTRL3_7 BIT(7) +#define MSK_COC_CTL3_COC_CTRL3_6_0 0x7f + +/* CoC 7th Ctl, default value: 0x00 */ +#define REG_COC_CTL6 0x0716 +#define BIT_COC_CTL6_COC_CTRL6_7 BIT(7) +#define BIT_COC_CTL6_COC_CTRL6_6 BIT(6) +#define MSK_COC_CTL6_COC_CTRL6_5_0 0x3f + +/* CoC 8th Ctl, default value: 0x06 */ +#define REG_COC_CTL7 0x0717 +#define BIT_COC_CTL7_COC_CTRL7_7 BIT(7) +#define BIT_COC_CTL7_COC_CTRL7_6 BIT(6) +#define BIT_COC_CTL7_COC_CTRL7_5 BIT(5) +#define MSK_COC_CTL7_COC_CTRL7_4_3 0x18 +#define MSK_COC_CTL7_COC_CTRL7_2_0 0x07 + +/* CoC 10th Ctl, default value: 0x00 */ +#define REG_COC_CTL9 0x0719 + +/* CoC 11th Ctl, default value: 0x00 */ +#define REG_COC_CTLA 0x071a + +/* CoC 12th Ctl, default value: 0x00 */ +#define REG_COC_CTLB 0x071b + +/* CoC 13th Ctl, default value: 0x0f */ +#define REG_COC_CTLC 0x071c + +/* CoC 14th Ctl, default value: 0x0a */ +#define REG_COC_CTLD 0x071d +#define BIT_COC_CTLD_COC_CTRLD_7 BIT(7) +#define MSK_COC_CTLD_COC_CTRLD_6_0 0x7f + +/* CoC 15th Ctl, default value: 0x0a */ +#define REG_COC_CTLE 0x071e +#define BIT_COC_CTLE_COC_CTRLE_7 BIT(7) +#define MSK_COC_CTLE_COC_CTRLE_6_0 0x7f + +/* CoC 16th Ctl, default value: 0x00 */ +#define REG_COC_CTLF 0x071f +#define MSK_COC_CTLF_COC_CTRLF_7_3 0xf8 +#define MSK_COC_CTLF_COC_CTRLF_2_0 0x07 + +/* CoC 18th Ctl, default value: 0x32 */ +#define REG_COC_CTL11 0x0721 +#define MSK_COC_CTL11_COC_CTRL11_7_4 0xf0 +#define MSK_COC_CTL11_COC_CTRL11_3_0 0x0f + +/* CoC 21st Ctl, default value: 0x00 */ +#define REG_COC_CTL14 0x0724 +#define MSK_COC_CTL14_COC_CTRL14_7_4 0xf0 +#define MSK_COC_CTL14_COC_CTRL14_3_0 0x0f + +/* CoC 22nd Ctl, default value: 0x00 */ +#define REG_COC_CTL15 0x0725 +#define BIT_COC_CTL15_COC_CTRL15_7 BIT(7) +#define MSK_COC_CTL15_COC_CTRL15_6_4 0x70 +#define MSK_COC_CTL15_COC_CTRL15_3_0 0x0f + +/* CoC Interrupt, default value: 0x00 */ +#define REG_COC_INTR 0x0726 + +/* CoC Interrupt Mask, default value: 0x00 */ +#define REG_COC_INTR_MASK 0x0727 +#define BIT_COC_PLL_LOCK_STATUS_CHANGE BIT(0) +#define BIT_COC_CALIBRATION_DONE BIT(1) + +/* CoC Misc Ctl, default value: 0x00 */ +#define REG_COC_MISC_CTL0 0x0728 +#define BIT_COC_MISC_CTL0_FSM_MON BIT(7) + +/* CoC 24th Ctl, default value: 0x00 */ +#define REG_COC_CTL17 0x072a +#define MSK_COC_CTL17_COC_CTRL17_7_4 0xf0 +#define MSK_COC_CTL17_COC_CTRL17_3_0 0x0f + +/* CoC 25th Ctl, default value: 0x00 */ +#define REG_COC_CTL18 0x072b +#define MSK_COC_CTL18_COC_CTRL18_7_4 0xf0 +#define MSK_COC_CTL18_COC_CTRL18_3_0 0x0f + +/* CoC 26th Ctl, default value: 0x00 */ +#define REG_COC_CTL19 0x072c +#define MSK_COC_CTL19_COC_CTRL19_7_4 0xf0 +#define MSK_COC_CTL19_COC_CTRL19_3_0 0x0f + +/* CoC 27th Ctl, default value: 0x00 */ +#define REG_COC_CTL1A 0x072d +#define MSK_COC_CTL1A_COC_CTRL1A_7_2 0xfc +#define MSK_COC_CTL1A_COC_CTRL1A_1_0 0x03 + +/* DoC 9th Status, default value: 0x00 */ +#define REG_DOC_STAT_8 0x0740 + +/* DoC 10th Status, default value: 0x00 */ +#define REG_DOC_STAT_9 0x0741 + +/* DoC 5th CFG, default value: 0x00 */ +#define REG_DOC_CFG4 0x074e +#define MSK_DOC_CFG4_DBG_STATE_DOC_FSM 0x0f + +/* DoC 1st Ctl, default value: 0x40 */ +#define REG_DOC_CTL0 0x0751 + +/* DoC 7th Ctl, default value: 0x00 */ +#define REG_DOC_CTL6 0x0757 +#define BIT_DOC_CTL6_DOC_CTRL6_7 BIT(7) +#define BIT_DOC_CTL6_DOC_CTRL6_6 BIT(6) +#define MSK_DOC_CTL6_DOC_CTRL6_5_4 0x30 +#define MSK_DOC_CTL6_DOC_CTRL6_3_0 0x0f + +/* DoC 8th Ctl, default value: 0x00 */ +#define REG_DOC_CTL7 0x0758 +#define BIT_DOC_CTL7_DOC_CTRL7_7 BIT(7) +#define BIT_DOC_CTL7_DOC_CTRL7_6 BIT(6) +#define BIT_DOC_CTL7_DOC_CTRL7_5 BIT(5) +#define MSK_DOC_CTL7_DOC_CTRL7_4_3 0x18 +#define MSK_DOC_CTL7_DOC_CTRL7_2_0 0x07 + +/* DoC 9th Ctl, default value: 0x00 */ +#define REG_DOC_CTL8 0x076c +#define BIT_DOC_CTL8_DOC_CTRL8_7 BIT(7) +#define MSK_DOC_CTL8_DOC_CTRL8_6_4 0x70 +#define MSK_DOC_CTL8_DOC_CTRL8_3_2 0x0c +#define MSK_DOC_CTL8_DOC_CTRL8_1_0 0x03 + +/* DoC 10th Ctl, default value: 0x00 */ +#define REG_DOC_CTL9 0x076d + +/* DoC 11th Ctl, default value: 0x00 */ +#define REG_DOC_CTLA 0x076e + +/* DoC 15th Ctl, default value: 0x00 */ +#define REG_DOC_CTLE 0x0772 +#define BIT_DOC_CTLE_DOC_CTRLE_7 BIT(7) +#define BIT_DOC_CTLE_DOC_CTRLE_6 BIT(6) +#define MSK_DOC_CTLE_DOC_CTRLE_5_4 0x30 +#define MSK_DOC_CTLE_DOC_CTRLE_3_0 0x0f + +/* Interrupt Mask 1st, default value: 0x00 */ +#define REG_MHL_INT_0_MASK 0x0580 + +/* Interrupt Mask 2nd, default value: 0x00 */ +#define REG_MHL_INT_1_MASK 0x0581 + +/* Interrupt Mask 3rd, default value: 0x00 */ +#define REG_MHL_INT_2_MASK 0x0582 + +/* Interrupt Mask 4th, default value: 0x00 */ +#define REG_MHL_INT_3_MASK 0x0583 + +/* MDT Receive Time Out, default value: 0x00 */ +#define REG_MDT_RCV_TIMEOUT 0x0584 + +/* MDT Transmit Time Out, default value: 0x00 */ +#define REG_MDT_XMIT_TIMEOUT 0x0585 + +/* MDT Receive Control, default value: 0x00 */ +#define REG_MDT_RCV_CTRL 0x0586 +#define BIT_MDT_RCV_CTRL_MDT_RCV_EN BIT(7) +#define BIT_MDT_RCV_CTRL_MDT_DELAY_RCV_EN BIT(6) +#define BIT_MDT_RCV_CTRL_MDT_RFIFO_OVER_WR_EN BIT(4) +#define BIT_MDT_RCV_CTRL_MDT_XFIFO_OVER_WR_EN BIT(3) +#define BIT_MDT_RCV_CTRL_MDT_DISABLE BIT(2) +#define BIT_MDT_RCV_CTRL_MDT_RFIFO_CLR_ALL BIT(1) +#define BIT_MDT_RCV_CTRL_MDT_RFIFO_CLR_CUR BIT(0) + +/* MDT Receive Read Port, default value: 0x00 */ +#define REG_MDT_RCV_READ_PORT 0x0587 + +/* MDT Transmit Control, default value: 0x70 */ +#define REG_MDT_XMIT_CTRL 0x0588 +#define BIT_MDT_XMIT_CTRL_MDT_XMIT_EN BIT(7) +#define BIT_MDT_XMIT_CTRL_MDT_XMIT_CMD_MERGE_EN BIT(6) +#define BIT_MDT_XMIT_CTRL_MDT_XMIT_FIXED_BURST_LEN BIT(5) +#define BIT_MDT_XMIT_CTRL_MDT_XMIT_FIXED_AID BIT(4) +#define BIT_MDT_XMIT_CTRL_MDT_XMIT_SINGLE_RUN_EN BIT(3) +#define BIT_MDT_XMIT_CTRL_MDT_CLR_ABORT_WAIT BIT(2) +#define BIT_MDT_XMIT_CTRL_MDT_XFIFO_CLR_ALL BIT(1) +#define BIT_MDT_XMIT_CTRL_MDT_XFIFO_CLR_CUR BIT(0) + +/* MDT Receive WRITE Port, default value: 0x00 */ +#define REG_MDT_XMIT_WRITE_PORT 0x0589 + +/* MDT RFIFO Status, default value: 0x00 */ +#define REG_MDT_RFIFO_STAT 0x058a +#define MSK_MDT_RFIFO_STAT_MDT_RFIFO_CNT 0xe0 +#define MSK_MDT_RFIFO_STAT_MDT_RFIFO_CUR_BYTE_CNT 0x1f + +/* MDT XFIFO Status, default value: 0x80 */ +#define REG_MDT_XFIFO_STAT 0x058b +#define MSK_MDT_XFIFO_STAT_MDT_XFIFO_LEVEL_AVAIL 0xe0 +#define BIT_MDT_XFIFO_STAT_MDT_XMIT_PRE_HS_EN BIT(4) +#define MSK_MDT_XFIFO_STAT_MDT_WRITE_BURST_LEN 0x0f + +/* MDT Interrupt 0, default value: 0x0c */ +#define REG_MDT_INT_0 0x058c +#define BIT_MDT_RFIFO_DATA_RDY BIT(0) +#define BIT_MDT_IDLE_AFTER_HAWB_DISABLE BIT(2) +#define BIT_MDT_XFIFO_EMPTY BIT(3) + +/* MDT Interrupt 0 Mask, default value: 0x00 */ +#define REG_MDT_INT_0_MASK 0x058d + +/* MDT Interrupt 1, default value: 0x00 */ +#define REG_MDT_INT_1 0x058e +#define BIT_MDT_RCV_TIMEOUT BIT(0) +#define BIT_MDT_RCV_SM_ABORT_PKT_RCVD BIT(1) +#define BIT_MDT_RCV_SM_ERROR BIT(2) +#define BIT_MDT_XMIT_TIMEOUT BIT(5) +#define BIT_MDT_XMIT_SM_ABORT_PKT_RCVD BIT(6) +#define BIT_MDT_XMIT_SM_ERROR BIT(7) + +/* MDT Interrupt 1 Mask, default value: 0x00 */ +#define REG_MDT_INT_1_MASK 0x058f + +/* CBUS Vendor ID, default value: 0x01 */ +#define REG_CBUS_VENDOR_ID 0x0590 + +/* CBUS Connection Status, default value: 0x00 */ +#define REG_CBUS_STATUS 0x0591 +#define BIT_CBUS_STATUS_MHL_CABLE_PRESENT BIT(4) +#define BIT_CBUS_STATUS_MSC_HB_SUCCESS BIT(3) +#define BIT_CBUS_STATUS_CBUS_HPD BIT(2) +#define BIT_CBUS_STATUS_MHL_MODE BIT(1) +#define BIT_CBUS_STATUS_CBUS_CONNECTED BIT(0) + +/* CBUS Interrupt 1st, default value: 0x00 */ +#define REG_CBUS_INT_0 0x0592 +#define BIT_CBUS_MSC_MT_DONE_NACK BIT(7) +#define BIT_CBUS_MSC_MR_SET_INT BIT(6) +#define BIT_CBUS_MSC_MR_WRITE_BURST BIT(5) +#define BIT_CBUS_MSC_MR_MSC_MSG BIT(4) +#define BIT_CBUS_MSC_MR_WRITE_STAT BIT(3) +#define BIT_CBUS_HPD_CHG BIT(2) +#define BIT_CBUS_MSC_MT_DONE BIT(1) +#define BIT_CBUS_CNX_CHG BIT(0) + +/* CBUS Interrupt Mask 1st, default value: 0x00 */ +#define REG_CBUS_INT_0_MASK 0x0593 + +/* CBUS Interrupt 2nd, default value: 0x00 */ +#define REG_CBUS_INT_1 0x0594 +#define BIT_CBUS_CMD_ABORT BIT(6) +#define BIT_CBUS_MSC_ABORT_RCVD BIT(3) +#define BIT_CBUS_DDC_ABORT BIT(2) +#define BIT_CBUS_CEC_ABORT BIT(1) + +/* CBUS Interrupt Mask 2nd, default value: 0x00 */ +#define REG_CBUS_INT_1_MASK 0x0595 + +/* CBUS DDC Abort Interrupt, default value: 0x00 */ +#define REG_DDC_ABORT_INT 0x0598 + +/* CBUS DDC Abort Interrupt Mask, default value: 0x00 */ +#define REG_DDC_ABORT_INT_MASK 0x0599 + +/* CBUS MSC Requester Abort Interrupt, default value: 0x00 */ +#define REG_MSC_MT_ABORT_INT 0x059a + +/* CBUS MSC Requester Abort Interrupt Mask, default value: 0x00 */ +#define REG_MSC_MT_ABORT_INT_MASK 0x059b + +/* CBUS MSC Responder Abort Interrupt, default value: 0x00 */ +#define REG_MSC_MR_ABORT_INT 0x059c + +/* CBUS MSC Responder Abort Interrupt Mask, default value: 0x00 */ +#define REG_MSC_MR_ABORT_INT_MASK 0x059d + +/* CBUS RX DISCOVERY interrupt, default value: 0x00 */ +#define REG_CBUS_RX_DISC_INT0 0x059e + +/* CBUS RX DISCOVERY Interrupt Mask, default value: 0x00 */ +#define REG_CBUS_RX_DISC_INT0_MASK 0x059f + +/* CBUS_Link_Layer Control #8, default value: 0x00 */ +#define REG_CBUS_LINK_CTRL_8 0x05a7 + +/* MDT State Machine Status, default value: 0x00 */ +#define REG_MDT_SM_STAT 0x05b5 +#define MSK_MDT_SM_STAT_MDT_RCV_STATE 0xf0 +#define MSK_MDT_SM_STAT_MDT_XMIT_STATE 0x0f + +/* CBUS MSC command trigger, default value: 0x00 */ +#define REG_MSC_COMMAND_START 0x05b8 +#define BIT_MSC_COMMAND_START_DEBUG BIT(5) +#define BIT_MSC_COMMAND_START_WRITE_BURST BIT(4) +#define BIT_MSC_COMMAND_START_WRITE_STAT BIT(3) +#define BIT_MSC_COMMAND_START_READ_DEVCAP BIT(2) +#define BIT_MSC_COMMAND_START_MSC_MSG BIT(1) +#define BIT_MSC_COMMAND_START_PEER BIT(0) + +/* CBUS MSC Command/Offset, default value: 0x00 */ +#define REG_MSC_CMD_OR_OFFSET 0x05b9 + +/* CBUS MSC Transmit Data */ +#define REG_MSC_1ST_TRANSMIT_DATA 0x05ba +#define REG_MSC_2ND_TRANSMIT_DATA 0x05bb + +/* CBUS MSC Requester Received Data */ +#define REG_MSC_MT_RCVD_DATA0 0x05bc +#define REG_MSC_MT_RCVD_DATA1 0x05bd + +/* CBUS MSC Responder MSC_MSG Received Data */ +#define REG_MSC_MR_MSC_MSG_RCVD_1ST_DATA 0x05bf +#define REG_MSC_MR_MSC_MSG_RCVD_2ND_DATA 0x05c0 + +/* CBUS MSC Heartbeat Control, default value: 0x27 */ +#define REG_MSC_HEARTBEAT_CTRL 0x05c4 +#define BIT_MSC_HEARTBEAT_CTRL_MSC_HB_EN BIT(7) +#define MSK_MSC_HEARTBEAT_CTRL_MSC_HB_FAIL_LIMIT 0x70 +#define MSK_MSC_HEARTBEAT_CTRL_MSC_HB_PERIOD_MSB 0x0f + +/* CBUS MSC Compatibility Control, default value: 0x02 */ +#define REG_CBUS_MSC_COMPAT_CTRL 0x05c7 +#define BIT_CBUS_MSC_COMPAT_CTRL_XDEVCAP_EN BIT(7) +#define BIT_CBUS_MSC_COMPAT_CTRL_DISABLE_MSC_ON_CBUS BIT(6) +#define BIT_CBUS_MSC_COMPAT_CTRL_DISABLE_DDC_ON_CBUS BIT(5) +#define BIT_CBUS_MSC_COMPAT_CTRL_DISABLE_GET_DDC_ERRORCODE BIT(3) +#define BIT_CBUS_MSC_COMPAT_CTRL_DISABLE_GET_VS1_ERRORCODE BIT(2) + +/* CBUS3 Converter Control, default value: 0x24 */ +#define REG_CBUS3_CNVT 0x05dc +#define MSK_CBUS3_CNVT_CBUS3_RETRYLMT 0xf0 +#define MSK_CBUS3_CNVT_CBUS3_PEERTOUT_SEL 0x0c +#define BIT_CBUS3_CNVT_TEARCBUS_EN BIT(1) +#define BIT_CBUS3_CNVT_CBUS3CNVT_EN BIT(0) + +/* Discovery Control1, default value: 0x24 */ +#define REG_DISC_CTRL1 0x05e0 +#define BIT_DISC_CTRL1_CBUS_INTR_EN BIT(7) +#define BIT_DISC_CTRL1_HB_ONLY BIT(6) +#define MSK_DISC_CTRL1_DISC_ATT 0x30 +#define MSK_DISC_CTRL1_DISC_CYC 0x0c +#define BIT_DISC_CTRL1_DISC_EN BIT(0) + +#define VAL_PUP_OFF 0 +#define VAL_PUP_20K 1 +#define VAL_PUP_5K 2 + +/* Discovery Control4, default value: 0x80 */ +#define REG_DISC_CTRL4 0x05e3 +#define MSK_DISC_CTRL4_CBUSDISC_PUP_SEL 0xc0 +#define MSK_DISC_CTRL4_CBUSIDLE_PUP_SEL 0x30 +#define VAL_DISC_CTRL4(pup_disc, pup_idle) (((pup_disc) << 6) | (pup_idle << 4)) + +/* Discovery Control5, default value: 0x03 */ +#define REG_DISC_CTRL5 0x05e4 +#define BIT_DISC_CTRL5_DSM_OVRIDE BIT(3) +#define MSK_DISC_CTRL5_CBUSMHL_PUP_SEL 0x03 + +/* Discovery Control8, default value: 0x81 */ +#define REG_DISC_CTRL8 0x05e7 +#define BIT_DISC_CTRL8_NOMHLINT_CLR_BYPASS BIT(7) +#define BIT_DISC_CTRL8_DELAY_CBUS_INTR_EN BIT(0) + +/* Discovery Control9, default value: 0x54 */ +#define REG_DISC_CTRL9 0x05e8 +#define BIT_DISC_CTRL9_MHL3_RSEN_BYP BIT(7) +#define BIT_DISC_CTRL9_MHL3DISC_EN BIT(6) +#define BIT_DISC_CTRL9_WAKE_DRVFLT BIT(4) +#define BIT_DISC_CTRL9_NOMHL_EST BIT(3) +#define BIT_DISC_CTRL9_DISC_PULSE_PROCEED BIT(2) +#define BIT_DISC_CTRL9_WAKE_PULSE_BYPASS BIT(1) +#define BIT_DISC_CTRL9_VBUS_OUTPUT_CAPABILITY_SRC BIT(0) + +/* Discovery Status1, default value: 0x00 */ +#define REG_DISC_STAT1 0x05eb +#define BIT_DISC_STAT1_PSM_OVRIDE BIT(5) +#define MSK_DISC_STAT1_DISC_SM 0x0f + +/* Discovery Status2, default value: 0x00 */ +#define REG_DISC_STAT2 0x05ec +#define BIT_DISC_STAT2_CBUS_OE_POL BIT(6) +#define BIT_DISC_STAT2_CBUS_SATUS BIT(5) +#define BIT_DISC_STAT2_RSEN BIT(4) + +#define MSK_DISC_STAT2_MHL_VRSN 0x0c +#define VAL_DISC_STAT2_DEFAULT 0x00 +#define VAL_DISC_STAT2_MHL1_2 0x04 +#define VAL_DISC_STAT2_MHL3 0x08 +#define VAL_DISC_STAT2_RESERVED 0x0c + +#define MSK_DISC_STAT2_RGND 0x03 +#define VAL_RGND_OPEN 0x00 +#define VAL_RGND_2K 0x01 +#define VAL_RGND_1K 0x02 +#define VAL_RGND_SHORT 0x03 + +/* Interrupt CBUS_reg1 INTR0, default value: 0x00 */ +#define REG_CBUS_DISC_INTR0 0x05ed +#define BIT_RGND_READY_INT BIT(6) +#define BIT_CBUS_MHL12_DISCON_INT BIT(5) +#define BIT_CBUS_MHL3_DISCON_INT BIT(4) +#define BIT_NOT_MHL_EST_INT BIT(3) +#define BIT_MHL_EST_INT BIT(2) +#define BIT_MHL3_EST_INT BIT(1) +#define VAL_CBUS_MHL_DISCON (BIT_CBUS_MHL12_DISCON_INT \ + | BIT_CBUS_MHL3_DISCON_INT \ + | BIT_NOT_MHL_EST_INT) + +/* Interrupt CBUS_reg1 INTR0 Mask, default value: 0x00 */ +#define REG_CBUS_DISC_INTR0_MASK 0x05ee + +#endif /* __SIL_SII8620_H__ */ |