summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/phy/rockchip/phy-rockchip-inno-usb2.c35
1 files changed, 19 insertions, 16 deletions
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 91fba60267a0..a1f2253d60c1 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -55,16 +55,16 @@ enum rockchip_usb2phy_host_state {
};
/**
- * Different states involved in USB charger detection.
- * USB_CHG_STATE_UNDEFINED USB charger is not connected or detection
+ * enum usb_chg_state - Different states involved in USB charger detection.
+ * @USB_CHG_STATE_UNDEFINED: USB charger is not connected or detection
* process is not yet started.
- * USB_CHG_STATE_WAIT_FOR_DCD Waiting for Data pins contact.
- * USB_CHG_STATE_DCD_DONE Data pin contact is detected.
- * USB_CHG_STATE_PRIMARY_DONE Primary detection is completed (Detects
+ * @USB_CHG_STATE_WAIT_FOR_DCD: Waiting for Data pins contact.
+ * @USB_CHG_STATE_DCD_DONE: Data pin contact is detected.
+ * @USB_CHG_STATE_PRIMARY_DONE: Primary detection is completed (Detects
* between SDP and DCP/CDP).
- * USB_CHG_STATE_SECONDARY_DONE Secondary detection is completed (Detects
- * between DCP and CDP).
- * USB_CHG_STATE_DETECTED USB charger type is determined.
+ * @USB_CHG_STATE_SECONDARY_DONE: Secondary detection is completed (Detects
+ * between DCP and CDP).
+ * @USB_CHG_STATE_DETECTED: USB charger type is determined.
*/
enum usb_chg_state {
USB_CHG_STATE_UNDEFINED = 0,
@@ -94,7 +94,7 @@ struct usb2phy_reg {
};
/**
- * struct rockchip_chg_det_reg: usb charger detect registers
+ * struct rockchip_chg_det_reg - usb charger detect registers
* @cp_det: charging port detected successfully.
* @dcp_det: dedicated charging port detected successfully.
* @dp_det: assert data pin connect successfully.
@@ -120,7 +120,7 @@ struct rockchip_chg_det_reg {
};
/**
- * struct rockchip_usb2phy_port_cfg: usb-phy port configuration.
+ * struct rockchip_usb2phy_port_cfg - usb-phy port configuration.
* @phy_sus: phy suspend register.
* @bvalid_det_en: vbus valid rise detection enable register.
* @bvalid_det_st: vbus valid rise detection status register.
@@ -148,10 +148,11 @@ struct rockchip_usb2phy_port_cfg {
};
/**
- * struct rockchip_usb2phy_cfg: usb-phy configuration.
+ * struct rockchip_usb2phy_cfg - usb-phy configuration.
* @reg: the address offset of grf for usb-phy config.
* @num_ports: specify how many ports that the phy has.
* @clkout_ctl: keep on/turn off output clk of phy.
+ * @port_cfgs: usb-phy port configurations.
* @chg_det: charger detection registers.
*/
struct rockchip_usb2phy_cfg {
@@ -163,12 +164,13 @@ struct rockchip_usb2phy_cfg {
};
/**
- * struct rockchip_usb2phy_port: usb-phy port data.
+ * struct rockchip_usb2phy_port - usb-phy port data.
+ * @phy: generic phy.
* @port_id: flag for otg port or host port.
* @suspended: phy suspended flag.
* @utmi_avalid: utmi avalid status usage flag.
* true - use avalid to get vbus status
- * flase - use bvalid to get vbus status
+ * false - use bvalid to get vbus status
* @vbus_attached: otg device vbus status.
* @bvalid_irq: IRQ number assigned for vbus valid rise detection.
* @ls_irq: IRQ number assigned for linestate detection.
@@ -178,7 +180,7 @@ struct rockchip_usb2phy_cfg {
* @chg_work: charge detect work.
* @otg_sm_work: OTG state machine work.
* @sm_work: HOST state machine work.
- * @phy_cfg: port register configuration, assigned by driver data.
+ * @port_cfg: port register configuration, assigned by driver data.
* @event_nb: hold event notification callback.
* @state: define OTG enumeration states before device reset.
* @mode: the dr_mode of the controller.
@@ -203,12 +205,13 @@ struct rockchip_usb2phy_port {
};
/**
- * struct rockchip_usb2phy: usb2.0 phy driver data.
+ * struct rockchip_usb2phy - usb2.0 phy driver data.
+ * @dev: pointer to device.
* @grf: General Register Files regmap.
* @usbgrf: USB General Register Files regmap.
* @clk: clock struct of phy input clk.
* @clk480m: clock struct of phy output clk.
- * @clk_hw: clock struct of phy output clk management.
+ * @clk480m_hw: clock struct of phy output clk management.
* @chg_state: states involved in USB charger detection.
* @chg_type: USB charger types.
* @dcd_retries: The retry count used to track Data contact