diff options
| -rw-r--r-- | drivers/net/dsa/sja1105/sja1105_main.c | 100 |
1 files changed, 42 insertions, 58 deletions
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index b513713be610..8fc309446e1e 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -1358,37 +1358,16 @@ static int sja1105_adjust_port_config(struct sja1105_private *priv, int port, return sja1105_clocking_setup_port(priv, port); } -/* The SJA1105 MAC programming model is through the static config (the xMII - * Mode table cannot be dynamically reconfigured), and we have to program - * that early (earlier than PHYLINK calls us, anyway). - * So just error out in case the connected PHY attempts to change the initial - * system interface MII protocol from what is defined in the DT, at least for - * now. - */ -static bool sja1105_phy_mode_mismatch(struct sja1105_private *priv, int port, - phy_interface_t interface) -{ - return priv->phy_mode[port] != interface; -} - -static void sja1105_mac_config(struct dsa_switch *ds, int port, - unsigned int mode, - const struct phylink_link_state *state) +static struct phylink_pcs * +sja1105_mac_select_pcs(struct dsa_switch *ds, int port, phy_interface_t iface) { - struct dsa_port *dp = dsa_to_port(ds, port); struct sja1105_private *priv = ds->priv; - struct dw_xpcs *xpcs; - - if (sja1105_phy_mode_mismatch(priv, port, state->interface)) { - dev_err(ds->dev, "Changing PHY mode to %s not supported!\n", - phy_modes(state->interface)); - return; - } - - xpcs = priv->xpcs[port]; + struct dw_xpcs *xpcs = priv->xpcs[port]; if (xpcs) - phylink_set_pcs(dp->pl, &xpcs->pcs); + return &xpcs->pcs; + + return NULL; } static void sja1105_mac_link_down(struct dsa_switch *ds, int port, @@ -1412,48 +1391,53 @@ static void sja1105_mac_link_up(struct dsa_switch *ds, int port, sja1105_inhibit_tx(priv, BIT(port), false); } -static void sja1105_phylink_validate(struct dsa_switch *ds, int port, - unsigned long *supported, - struct phylink_link_state *state) +static void sja1105_phylink_get_caps(struct dsa_switch *ds, int port, + struct phylink_config *config) { - /* Construct a new mask which exhaustively contains all link features - * supported by the MAC, and then apply that (logical AND) to what will - * be sent to the PHY for "marketing". - */ - __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; struct sja1105_private *priv = ds->priv; struct sja1105_xmii_params_entry *mii; + phy_interface_t phy_mode; - mii = priv->static_config.tables[BLK_IDX_XMII_PARAMS].entries; - - /* include/linux/phylink.h says: - * When @state->interface is %PHY_INTERFACE_MODE_NA, phylink - * expects the MAC driver to return all supported link modes. + /* This driver does not make use of the speed, duplex, pause or the + * advertisement in its mac_config, so it is safe to mark this driver + * as non-legacy. */ - if (state->interface != PHY_INTERFACE_MODE_NA && - sja1105_phy_mode_mismatch(priv, port, state->interface)) { - linkmode_zero(supported); - return; + config->legacy_pre_march2020 = false; + + phy_mode = priv->phy_mode[port]; + if (phy_mode == PHY_INTERFACE_MODE_SGMII || + phy_mode == PHY_INTERFACE_MODE_2500BASEX) { + /* Changing the PHY mode on SERDES ports is possible and makes + * sense, because that is done through the XPCS. We allow + * changes between SGMII and 2500base-X. + */ + if (priv->info->supports_sgmii[port]) + __set_bit(PHY_INTERFACE_MODE_SGMII, + config->supported_interfaces); + + if (priv->info->supports_2500basex[port]) + __set_bit(PHY_INTERFACE_MODE_2500BASEX, + config->supported_interfaces); + } else { + /* The SJA1105 MAC programming model is through the static + * config (the xMII Mode table cannot be dynamically + * reconfigured), and we have to program that early. + */ + __set_bit(phy_mode, config->supported_interfaces); } /* The MAC does not support pause frames, and also doesn't * support half-duplex traffic modes. */ - phylink_set(mask, Autoneg); - phylink_set(mask, MII); - phylink_set(mask, 10baseT_Full); - phylink_set(mask, 100baseT_Full); - phylink_set(mask, 100baseT1_Full); + config->mac_capabilities = MAC_10FD | MAC_100FD; + + mii = priv->static_config.tables[BLK_IDX_XMII_PARAMS].entries; if (mii->xmii_mode[port] == XMII_MODE_RGMII || mii->xmii_mode[port] == XMII_MODE_SGMII) - phylink_set(mask, 1000baseT_Full); - if (priv->info->supports_2500basex[port]) { - phylink_set(mask, 2500baseT_Full); - phylink_set(mask, 2500baseX_Full); - } + config->mac_capabilities |= MAC_1000FD; - linkmode_and(supported, supported, mask); - linkmode_and(state->advertising, state->advertising, mask); + if (priv->info->supports_2500basex[port]) + config->mac_capabilities |= MAC_2500FD; } static int @@ -3152,8 +3136,8 @@ static const struct dsa_switch_ops sja1105_switch_ops = { .set_ageing_time = sja1105_set_ageing_time, .port_change_mtu = sja1105_change_mtu, .port_max_mtu = sja1105_get_max_mtu, - .phylink_validate = sja1105_phylink_validate, - .phylink_mac_config = sja1105_mac_config, + .phylink_get_caps = sja1105_phylink_get_caps, + .phylink_mac_select_pcs = sja1105_mac_select_pcs, .phylink_mac_link_up = sja1105_mac_link_up, .phylink_mac_link_down = sja1105_mac_link_down, .get_strings = sja1105_get_strings, |