diff options
| -rw-r--r-- | drivers/tty/serial/omap-serial.c | 22 |
1 files changed, 14 insertions, 8 deletions
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 6129fe515932..10256fa04b40 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -681,7 +681,7 @@ static unsigned int serial_omap_get_mctrl(struct uart_port *port) static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl) { struct uart_omap_port *up = to_uart_omap_port(port); - unsigned char mcr = 0, old_mcr; + unsigned char mcr = 0, old_mcr, lcr; dev_dbg(up->port.dev, "serial_omap_set_mctrl+%d\n", up->port.line); if (mctrl & TIOCM_RTS) @@ -701,6 +701,17 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl) UART_MCR_DTR | UART_MCR_RTS); up->mcr = old_mcr | mcr; serial_out(up, UART_MCR, up->mcr); + + /* Turn off autoRTS if RTS is lowered; restore autoRTS if RTS raised */ + lcr = serial_in(up, UART_LCR); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS)) + up->efr |= UART_EFR_RTS; + else + up->efr &= UART_EFR_RTS; + serial_out(up, UART_EFR, up->efr); + serial_out(up, UART_LCR, lcr); + pm_runtime_mark_last_busy(up->dev); pm_runtime_put_autosuspend(up->dev); } @@ -756,8 +767,6 @@ static int serial_omap_startup(struct uart_port *port) * (they will be reenabled in set_termios()) */ serial_omap_clear_fifos(up); - /* For Hardware flow control */ - serial_out(up, UART_MCR, UART_MCR_RTS); /* * Clear the interrupt registers. @@ -1056,12 +1065,9 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, up->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF); if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) { - /* Enable AUTORTS and AUTOCTS */ + /* Enable AUTOCTS (autoRTS is enabled when RTS is raised) */ up->port.status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS; - up->efr |= UART_EFR_CTS | UART_EFR_RTS; - - /* Ensure MCR RTS is asserted */ - up->mcr |= UART_MCR_RTS; + up->efr |= UART_EFR_CTS; } else { /* Disable AUTORTS and AUTOCTS */ up->efr &= ~(UART_EFR_CTS | UART_EFR_RTS); |