summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/cdrom/00-INDEX22
-rw-r--r--Documentation/cdrom/aztcd822
-rw-r--r--Documentation/cdrom/cdu31a196
-rw-r--r--Documentation/cdrom/cm206185
-rw-r--r--Documentation/cdrom/gscd60
-rw-r--r--Documentation/cdrom/isp16100
-rw-r--r--Documentation/cdrom/mcdx29
-rw-r--r--Documentation/cdrom/optcd57
-rw-r--r--Documentation/cdrom/sbpcd1061
-rw-r--r--Documentation/cdrom/sjcd60
-rw-r--r--Documentation/cdrom/sonycd535122
-rw-r--r--Documentation/kernel-parameters.txt37
-rw-r--r--Documentation/m68k/kernel-options.txt7
-rw-r--r--Documentation/networking/net-modules.txt6
-rw-r--r--MAINTAINERS12
-rw-r--r--drivers/block/Kconfig11
-rw-r--r--drivers/block/Makefile1
-rw-r--r--drivers/block/acsi_slm.c1032
-rw-r--r--drivers/block/umem.c58
-rw-r--r--drivers/net/Kconfig16
-rw-r--r--drivers/net/Makefile2
-rw-r--r--drivers/net/Space.c8
-rw-r--r--drivers/net/atari_bionet.c675
-rw-r--r--drivers/net/atari_pamsnet.c878
-rw-r--r--fs/splice.c4
-rw-r--r--include/asm-m68k/atari_SLM.h28
-rw-r--r--include/asm-m68k/atari_acsi.h37
27 files changed, 9 insertions, 5517 deletions
diff --git a/Documentation/cdrom/00-INDEX b/Documentation/cdrom/00-INDEX
index 916dafe29d3f..433edf23dc49 100644
--- a/Documentation/cdrom/00-INDEX
+++ b/Documentation/cdrom/00-INDEX
@@ -2,32 +2,10 @@
- this file (info on CD-ROMs and Linux)
Makefile
- only used to generate TeX output from the documentation.
-aztcd
- - info on Aztech/Orchid/Okano/Wearnes/Conrad/CyCDROM driver.
cdrom-standard.tex
- LaTeX document on standardizing the CD-ROM programming interface.
-cdu31a
- - info on the Sony CDU31A/CDU33A CD-ROM driver.
-cm206
- - info on the Philips/LMS cm206/cm260 CD-ROM driver.
-gscd
- - info on the Goldstar R420 CD-ROM driver.
ide-cd
- info on setting up and using ATAPI (aka IDE) CD-ROMs.
-isp16
- - info on the CD-ROM interface on ISP16, MAD16 or Mozart sound card.
-mcd
- - info on limitations of standard Mitsumi CD-ROM driver.
-mcdx
- - info on improved Mitsumi CD-ROM driver.
-optcd
- - info on the Optics Storage 8000 AT CD-ROM driver
packet-writing.txt
- Info on the CDRW packet writing module
-sbpcd
- - info on the SoundBlaster/Panasonic CD-ROM interface driver.
-sjcd
- - info on the SANYO CDR-H94A CD-ROM interface driver.
-sonycd535
- - info on the Sony CDU-535 (and 531) CD-ROM driver.
diff --git a/Documentation/cdrom/aztcd b/Documentation/cdrom/aztcd
deleted file mode 100644
index 6bf0290ef7ce..000000000000
--- a/Documentation/cdrom/aztcd
+++ /dev/null
@@ -1,822 +0,0 @@
-$Id: README.aztcd,v 2.60 1997/11/29 09:51:25 root Exp root $
- Readme-File Documentation/cdrom/aztcd
- for
- AZTECH CD-ROM CDA268-01A, ORCHID CD-3110,
- OKANO/WEARNES CDD110, CONRAD TXC, CyCDROM CR520, CR540
- CD-ROM Drives
- Version 2.6 and newer
- (for other drives see 6.-8.)
-
-NOTE: THIS DRIVER WILL WORK WITH THE CD-ROM DRIVES LISTED, WHICH HAVE
- A PROPRIETARY INTERFACE (implemented on a sound card or on an
- ISA-AT-bus card).
- IT WILL DEFINITELY NOT WORK WITH CD-ROM DRIVES WITH *IDE*-INTERFACE,
- such as the Aztech CDA269-031SE !!! (The only known exceptions are
- 'faked' IDE drives like the CyCDROM CR520ie which work with aztcd
- under certain conditions, see 7.). IF YOU'RE USING A CD-ROM DRIVE
- WITH IDE-INTERFACE, SOMETIMES ALSO CALLED ATAPI-COMPATIBLE, PLEASE
- USE THE ide-cd.c DRIVER, WRITTEN BY MARK LORD AND SCOTT SNYDER !
- THE STANDARD-KERNEL 1.2.x NOW ALSO SUPPORTS IDE-CDROM-DRIVES, SEE THE
- HARDDISK (!) SECTION OF make config, WHEN COMPILING A NEW KERNEL!!!
-----------------------------------------------------------------------------
-
-Contents of this file:
- 1. NOTE
- 2. INSTALLATION
- 3. CONFIGURING YOUR KERNEL
- 4. RECOMPILING YOUR KERNEL
- 4.1 AZTCD AS A RUN-TIME LOADABLE MODULE
- 4.2 CDROM CONNECTED TO A SOUNDCARD
- 5. KNOWN PROBLEMS, FUTURE DEVELOPMENTS
- 5.1 MULTISESSION SUPPORT
- 5.2 STATUS RECOGNITION
- 5.3 DOSEMU's CDROM SUPPORT
- 6. BUG REPORTS
- 7. OTHER DRIVES
- 8. IF YOU DON'T SUCCEED ... DEBUGGING
- 9. TECHNICAL HISTORY OF THE DRIVER
- 10. ACKNOWLEDGMENTS
- 11. PROGRAMMING ADD ONS: CDPLAY.C
- APPENDIX: Source code of cdplay.c
-----------------------------------------------------------------------------
-
-1. NOTE
-This software has been successfully in alpha and beta test and is part of
-the standard kernel since kernel 1.1.8x since December 1994. It works with
-AZTECH CDA268-01A, ORCHID CDS-3110, ORCHID/WEARNES CDD110 and CONRAD TXC
-(Nr.99 31 23 -series 04) and has proven to be stable with kernel
-versions 1.0.9 and newer. But with any software there still may be bugs in it.
-So if you encounter problems, you are invited to help us improve this software.
-Please send me a detailed bug report (see chapter BUG REPORTS). You are also
-invited in helping us to increase the number of drives, which are supported.
-
-Please read the README-files carefully and always keep a backup copy of your
-old kernel, in order to reboot if something goes wrong!
-
-2. INSTALLATION
-The driver consists of a header file 'aztcd.h', which normally should reside
-in /usr/src/linux/drivers/cdrom and the source code 'aztcd.c', which normally
-resides in the same place. It uses /dev/aztcd (/dev/aztcd0 in some distri-
-butions), which must be a valid block device with major number 29 and reside
-in directory /dev. To mount a CD-ROM, your kernel needs to have the ISO9660-
-filesystem support included.
-
-PLEASE NOTE: aztcd.c has been developed in parallel to the linux kernel,
-which had and is having many major and minor changes which are not backward
-compatible. Quite definitely aztcd.c version 1.80 and newer will NOT work
-in kernels older than 1.3.33. So please always use the most recent version
-of aztcd.c with the appropriate linux-kernel.
-
-3. CONFIGURING YOUR KERNEL
-If your kernel is already configured for using the AZTECH driver you will
-see the following message while Linux boots:
- Aztech CD-ROM Init: DriverVersion=<version number> BaseAddress=<baseaddress>
- Aztech CD-ROM Init: FirmwareVersion=<firmware version id of your I/O-card>>>
- Aztech CD-ROM Init: <drive type> detected
- Aztech CD-ROM Init: End
-If the message looks different and you are sure to have a supported drive,
-it may have a different base address. The Aztech driver does look for the
-CD-ROM drive at the base address specified in aztcd.h at compile time. This
-address can be overwritten by boot parameter aztcd=....You should reboot and
-start Linux with boot parameter aztcd=<base address>, e.g. aztcd=0x320. If
-you do not know the base address, start your PC with DOS and look at the boot
-message of your CD-ROM's DOS driver. If that still does not help, use boot
-parameter aztcd=<base address>,0x79 , this tells aztcd to try a little harder.
-aztcd may be configured to use autoprobing the base address by recompiling
-it (see chapter 4.).
-
-If the message looks correct, as user 'root' you should be able to mount the
-drive by
- mount -t iso9660 -r /dev/aztcd0 /mnt
-and use it as any other filesystem. (If this does not work, check if
-/dev/aztcd0 and /mnt do exist and create them, if necessary by doing
- mknod /dev/aztcd0 b 29 0
- mkdir /mnt
-
-If you still get a different message while Linux boots or when you get the
-message, that the ISO9660-filesystem is not supported by your kernel, when
-you try to mount the CD-ROM drive, you have to recompile your kernel.
-
-If you do *not* have an Aztech/Orchid/Okano/Wearnes/TXC drive and want to
-bypass drive detection during Linux boot up, start with boot parameter aztcd=0.
-
-Most distributions nowadays do contain a boot disk image containing aztcd.
-Please note, that this driver will not work with IDE/ATAPI drives! With these
-you must use ide-cd.c instead.
-
-4. RECOMPILING YOUR KERNEL
-If your kernel is not yet configured for the AZTECH driver and the ISO9660-
-filesystem, you have to recompile your kernel:
-
-- Edit aztcd.h to set the I/O-address to your I/O-Base address (AZT_BASE_ADDR),
- the driver does not use interrupts or DMA, so if you are using an AZTECH
- CD268, an ORCHID CD-3110 or ORCHID/WEARNES CDD110 that's the only item you
- have to set up. If you have a soundcard, read chapter 4.2.
- Users of other drives should read chapter OTHER DRIVES of this file.
- You also can configure that address by kernel boot parameter aztcd=...
-- aztcd may be configured to use autoprobing the base address by setting
- AZT_BASE_ADDR to '-1'. In that case aztcd probes the addresses listed
- under AZT_BASE_AUTO. But please remember, that autoprobing always may
- incorrectly influence other hardware components too!
-- There are some other points, which may be configured, e.g. auto-eject the
- CD when unmounting a drive, tray locking etc., see aztcd.h for details.
-- If you're using a linux kernel version prior to 2.1.0, in aztcd.h
- uncomment the line '#define AZT_KERNEL_PRIOR_2_1'
-- Build a new kernel, configure it for 'Aztech/Orchid/Okano/Wearnes support'
- (if you want aztcd to be part of the kernel). Do not configure it for
- 'Aztech... support', if you want to use aztcd as a run time loadable module.
- But in any case you must have the ISO9660-filesystem included in your
- kernel.
-- Activate the new kernel, normally this is done by running LILO (don't for-
- get to configure it before and to keep a copy of your old kernel in case
- something goes wrong!).
-- Reboot
-- If you've included aztcd in your kernel, you now should see during boot
- some messages like
- Aztech CD-ROM Init: DriverVersion=<version number> BaseAddress=<baseaddress>
- Aztech CD-ROM Init: FirmwareVersion=<firmware version id of your I/O-card>
- Aztech CD-ROM Init: <drive type> detected
- Aztech CD-ROM Init: End
-- If you have not included aztcd in your kernel, but want to load aztcd as a
- run time loadable module see 4.1.
-- If the message looks correct, as user 'root' you should be able to mount
- the drive by
- mount -t iso9660 -r /dev/aztcd0 /mnt
- and use it as any other filesystem. (If this does not work, check if
- /dev/aztcd0 and /mnt do exist and create them, if necessary by doing
- mknod /dev/aztcd0 b 29 0
- mkdir /mnt
-- If this still does not help, see chapters OTHER DRIVES and DEBUGGING.
-
-4.1 AZTCD AS A RUN-TIME LOADABLE MODULE
-If you do not need aztcd permanently, you can also load and remove the driver
-during runtime via insmod and rmmod. To build aztcd as a loadable module you
-must configure your kernel for AZTECH module support (answer 'm' when con-
-figuring the kernel). Anyhow, you may run into problems, if the version of
-your boot kernel is not the same than the source kernel version, from which
-you create the modules. So rebuild your kernel, if necessary.
-
-Now edit the base address of your AZTECH interface card in
-/usr/src/linux/drivers/cdrom/aztcd.h to the appropriate value.
-aztcd may be configured to use autoprobing the base address by setting
-AZT_BASE_ADDR to '-1'. In that case aztcd probes the addresses listed
-under AZT_BASE_AUTO. But please remember, that autoprobing always may
-incorrectly influence other hardware components too!
-There are also some special features which may be configured, e.g.
-auto-eject a CD when unmounting the drive etc; see aztcd.h for details.
-Then change to /usr/src/linux and do a
- make modules
- make modules_install
-After that you can run-time load the driver via
- insmod /lib/modules/X.X.X/misc/aztcd.o
-and remove it via rmmod aztcd.
-If you did not set the correct base address in aztcd.h, you can also supply the
-base address when loading the driver via
- insmod /lib/modules/X.X.X/misc/aztcd.o aztcd=<base address>
-Again specifying aztcd=-1 will cause autoprobing.
-If you do not have the iso9660-filesystem in your boot kernel, you also have
-to load it before you can mount the CDROM:
- insmod /lib/modules/X.X.X/fs/isofs.o
-The mount procedure works as described in 4. above.
-(In all commands 'X.X.X' is the current linux kernel version number)
-
-4.2 CDROM CONNECTED TO A SOUNDCARD
-Most soundcards do have a bus interface to the CDROM-drive. In many cases
-this soundcard needs to be configured, before the CDROM can be used. This
-configuration procedure consists of writing some kind of initialization
-data to the soundcard registers. The AZTECH-CDROM driver in the moment does
-only support one type of soundcard (SoundWave32). Users of other soundcards
-should try to boot DOS first and let their DOS drivers initialize the
-soundcard and CDROM, then warm boot (or use loadlin) their PC to start
-Linux.
-Support for the CDROM-interface of SoundWave32-soundcards is directly
-implemented in the AZTECH driver. Please edit linux/drivers/cdrom/aztdc.h,
-uncomment line '#define AZT_SW32' and set the appropriate value for
-AZT_BASE_ADDR and AZT_SW32_BASE_ADDR. This support was tested with an Orchid
-CDS-3110 connected to a SoundWave32.
-If you want your soundcard to be supported, find out, how it needs to be
-configured and mail me (see 6.) the appropriate information.
-
-5. KNOWN PROBLEMS, FUTURE DEVELOPMENTS
-5.1 MULTISESSION SUPPORT
-Multisession support for CD's still is a myth. I implemented and tested a basic
-support for multisession and XA CDs, but I still have not enough CDs and appli-
-cations to test it rigorously. So if you'd like to help me, please contact me
-(Email address see below). As of version 1.4 and newer you can enable the
-multisession support in aztcd.h by setting AZT_MULTISESSION to 1. Doing so
-will cause the ISO9660-filesystem to deal with multisession CDs, ie. redirect
-requests to the Table of Contents (TOC) information from the last session,
-which contains the info of all previous sessions etc.. If you do set
-AZT_MULTISESSION to 0, you can use multisession CDs anyway. In that case the
-drive's firmware will do automatic redirection. For the ISO9660-filesystem any
-multisession CD will then look like a 'normal' single session CD. But never-
-theless the data of all sessions are viewable and accessible. So with practical-
-ly all real world applications you won't notice the difference. But as future
-applications may make use of advanced multisession features, I've started to
-implement the interface for the ISO9660 multisession interface via ioctl
-CDROMMULTISESSION.
-
-5.2 STATUS RECOGNITION
-The drive status recognition does not work correctly in all cases. Changing
-a disk or having the door open, when a drive is already mounted, is detected
-by the Aztech driver itself, but nevertheless causes multiple read attempts
-by the different layers of the ISO9660-filesystem driver, which finally timeout,
-so you have to wait quite a little... But isn't it bad style to change a disk
-in a mounted drive, anyhow ?!
-
-The driver uses busy wait in most cases for the drive handshake (macros
-STEN_LOW and DTEN_LOW). I tested with a 486/DX2 at 66MHz and a Pentium at
-60MHz and 90MHz. Whenever you use a much faster machine you are likely to get
-timeout messages. In that case edit aztcd.h and increase the timeout value
-AZT_TIMEOUT.
-
-For some 'slow' drive commands I implemented waiting with a timer waitqueue
-(macro STEN_LOW_WAIT). If you get this timeout message, you may also edit
-aztcd.h and increase the timeout value AZT_STATUS_DELAY. The waitqueue has
-shown to be a little critical. If you get kernel panic messages, edit aztcd.c
-and substitute STEN_LOW_WAIT by STEN_LOW. Busy waiting with STEN_LOW is more
-stable, but also causes CPU overhead.
-
-5.3 DOSEMU's CD-ROM SUPPORT
-With release 1.20 aztcd was modified to allow access to CD-ROMS when running
-under dosemu-0.60.0 aztcd-versions before 1.20 are most likely to crash
-Linux, when a CD-ROM is accessed under dosemu. This problem has partly been
-fixed, but still when accessing a directory for the first time the system
-might hang for some 30sec. So be patient, when using dosemu's CD-ROM support
-in combination with aztcd :-) !
-This problem has now (July 1995) been fixed by a modification to dosemu's
-CD-ROM driver. The new version came with dosemu-0.60.2, see dosemu's
-README.CDROM.
-
-6. BUG REPORTS
-Please send detailed bug reports and bug fixes via EMail to
-
- Werner.Zimmermann@fht-esslingen.de
-
-Please include a description of your CD-ROM drive type and interface card,
-the exact firmware message during Linux bootup, the version number of the
-AZTECH-CDROM-driver and the Linux kernel version. Also a description of your
-system's other hardware could be of interest, especially microprocessor type,
-clock frequency, other interface cards such as soundcards, ethernet adapter,
-game cards etc..
-
-I will try to collect the reports and make the necessary modifications from
-time to time. I may also come back to you directly with some bug fixes and
-ask you to do further testing and debugging.
-
-Editors of CD-ROMs are invited to send a 'cooperation' copy of their
-CD-ROMs to the volunteers, who provided the CD-ROM support for Linux. My
-snail mail address for such 'stuff' is
- Prof. Dr. W. Zimmermann
- Fachhochschule fuer Technik Esslingen
- Fachbereich IT
- Flandernstrasse 101
- D-73732 Esslingen
- Germany
-
-
-7. OTHER DRIVES
-The following drives ORCHID CDS3110, OKANO CDD110, WEARNES CDD110 and Conrad
-TXC Nr. 993123-series 04 nearly look the same as AZTECH CDA268-01A, especially
-they seem to use the same command codes. So it was quite simple to make the
-AZTECH driver work with these drives.
-
-Unfortunately I do not have any of these drives available, so I couldn't test
-it myself. In some installations, it seems necessary to initialize the drive
-with the DOS driver before (especially if combined with a sound card) and then
-do a warm boot (CTRL-ALT-RESET) or start Linux from DOS, e.g. with 'loadlin'.
-
-If you do not succeed, read chapter DEBUGGING. Thanks in advance!
-
-Sorry for the inconvenience, but it is difficult to develop for hardware,
-which you don't have available for testing. So if you like, please help us.
-
-If you do have a CyCDROM CR520ie thanks to Hilmar Berger's help your chances
-are good, that it will work with aztcd. The CR520ie is sold as an IDE-drive
-and really is connected to the IDE interface (primary at 0x1F0 or secondary
-at 0x170, configured as slave, not as master). Nevertheless it is not ATAPI
-compatible but still uses Aztech's command codes.
-
-
-8. DEBUGGING : IF YOU DON'T SUCCEED, TRY THE FOLLOWING
--reread the complete README file
--make sure, that your drive is hardware configured for
- transfer mode: polled
- IRQ: not used
- DMA: not used
- Base Address: something like 300, 320 ...
- You can check this, when you start the DOS driver, which came with your
- drive. By appropriately configuring the drive and the DOS driver you can
- check, whether your drive does operate in this mode correctly under DOS. If
- it does not operate under DOS, it won't under Linux.
- If your drive's base address is something like 0x170 or 0x1F0 (and it is
- not a CyCDROM CR520ie or CR 940ie) you most likely are having an IDE/ATAPI-
- compatible drive, which is not supported by aztcd.c, use ide-cd.c instead.
- Make sure the Base Address is configured correctly in aztcd.h, also make
- sure, that /dev/aztcd0 exists with the correct major number (compare it with
- the entry in file /usr/include/linux/major.h for the Aztech drive).
--insert a CD-ROM and close the tray
--cold boot your PC (i.e. via the power on switch or the reset button)
--if you start Linux via DOS, e.g. using loadlin, make sure, that the DOS
- driver for the CD-ROM drive is not loaded (comment out the calling lines
- in DOS' config.sys!)
--look for the aztcd: init message during Linux init and note them exactly
--log in as root and do a mount -t iso9660 /dev/aztcd0 /mnt
--if you don't succeed in the first time, try several times. Try also to open
- and close the tray, then mount again. Please note carefully all commands
- you typed in and the aztcd-messages, which you get.
--if you get an 'Aztech CD-ROM init: aborted' message, read the remarks about
- the version string below.
-
-If this does not help, do the same with the following differences
--start DOS before; make now sure, that the DOS driver for the CD-ROM is
- loaded under DOS (i.e. uncomment it again in config.sys)
--warm boot your PC (i.e. via CTRL-ALT-DEL)
- if you have it, you can also start via loadlin (try both).
- ...
- Again note all commands and the aztcd-messages.
-
-If you see STEN_LOW or STEN_LOW_WAIT error messages, increase the timeout
-values.
-
-If this still does not help,
--look in aztcd.c for the lines #if 0
- #define AZT_TEST1
- ...
- #endif
- and substitute '#if 0' by '#if 1'.
--recompile your kernel and repeat the above two procedures. You will now get
- a bundle of debugging messages from the driver. Again note your commands
- and the appropriate messages. If you have syslogd running, these messages
- may also be found in syslogd's kernel log file. Nevertheless in some
- installations syslogd does not yet run, when init() is called, thus look for
- the aztcd-messages during init, before the login-prompt appears.
- Then look in aztcd.c, to find out, what happened. The normal calling sequence
- is: aztcd_init() during Linux bootup procedure init()
- after doing a 'mount -t iso9660 /dev/aztcd0 /mnt' the normal calling sequence is
- aztcd_open() -> Status 2c after cold reboot with CDROM or audio CD inserted
- -> Status 8 after warm reboot with CDROM inserted
- -> Status 2e after cold reboot with no disk, closed tray
- -> Status 6e after cold reboot, mount with door open
- aztUpdateToc()
- aztGetDiskInfo()
- aztGetQChannelInfo() repeated several times
- aztGetToc()
- aztGetQChannelInfo() repeated several times
- a list of track information
- do_aztcd_request() }
- azt_transfer() } repeated several times
- azt_poll }
- Check, if there is a difference in the calling sequence or the status flags!
-
- There are a lot of other messages, eg. the ACMD-command code (defined in
- aztcd.h), status info from the getAztStatus-command and the state sequence of
- the finite state machine in azt_poll(). The most important are the status
- messages, look how they are defined and try to understand, if they make
- sense in the context where they appear. With a CD-ROM inserted the status
- should always be 8, except in aztcd_open(). Try to open the tray, insert an
- audio disk, insert no disk or reinsert the CD-ROM and check, if the status
- bits change accordingly. The status bits are the most likely point, where
- the drive manufacturers may implement changes.
-
-If you still don't succeed, a good point to start is to look in aztcd.c in
-function aztcd_init, where the drive should be detected during init. Do the
-following:
--reboot the system with boot parameter 'aztcd=<your base address>,0x79'. With
- parameter 0x79 most of the drive version detection is bypassed. After that
- you should see the complete version string including leading and trailing
- blanks during init.
- Now adapt the statement
- if ((result[1]=='A')&&(result[2]=='Z' ...)
- in aztcd_init() to exactly match the first 3 or 4 letters you have seen.
--Another point is the 'smart' card detection feature in aztcd_init(). Normally
- the CD-ROM drive is ready, when aztcd_init is trying to read the version
- string and a time consuming ACMD_SOFT_RESET command can be avoided. This is
- detected by looking, if AFL_OP_OK can be read correctly. If the CD-ROM drive
- hangs in some unknown state, e.g. because of an error before a warm start or
- because you first operated under DOS, even the version string may be correct,
- but the following commands will not. Then change the code in such a way,
- that the ACMD_SOFT_RESET is issued in any case, by substituting the
- if-statement 'if ( ...=AFL_OP_OK)' by 'if (1)'.
-
-If you succeed, please mail me the exact version string of your drive and
-the code modifications, you have made together with a short explanation.
-If you don't succeed, you may mail me the output of the debugging messages.
-But remember, they are only useful, if they are exact and complete and you
-describe in detail your hardware setup and what you did (cold/warm reboot,
-with/without DOS, DOS-driver started/not started, which Linux-commands etc.)
-
-
-9. TECHNICAL HISTORY OF THE DRIVER
-The AZTECH-Driver is a rework of the Mitsumi-Driver. Four major items had to
-be reworked:
-
-a) The Mitsumi drive does issue complete status information acknowledging
-each command, the Aztech drive does only signal that the command was
-processed. So whenever the complete status information is needed, an extra
-ACMD_GET_STATUS command is issued. The handshake procedure for the drive
-can be found in the functions aztSendCmd(), sendAztCmd() and getAztStatus().
-
-b) The Aztech Drive does not have a ACMD_GET_DISK_INFO command, so the
-necessary info about the number of tracks (firstTrack, lastTrack), disk
-length etc. has to be read from the TOC in the lead in track (see function
-aztGetDiskInfo()).
-
-c) Whenever data is read from the drive, the Mitsumi drive is started with a
-command to read an indefinite (0xffffff) number of sectors. When the appropriate
-number of sectors is read, the drive is stopped by a ACDM_STOP command. This
-does not work with the Aztech drive. I did not find a way to stop it. The
-stop and pause commands do only work in AUDIO mode but not in DATA mode.
-Therefore I had to modify the 'finite state machine' in function azt_poll to
-only read a certain number of sectors and then start a new read on demand. As I
-have not completely understood, how the buffer/caching scheme of the Mitsumi
-driver was implemented, I am not sure, if I have covered all cases correctly,
-whenever you get timeout messages, the bug is most likely to be in that
-function azt_poll() around switch(cmd) .... case ACD_S_DATA.
-
-d) I did not get information about changing drive mode. So I doubt, that the
-code around function azt_poll() case AZT_S_MODE does work. In my test I have
-not been able to switch to reading in raw mode. For reading raw mode, Aztech
-uses a different command than for cooked mode, which I only have implemen-
-ted in the ioctl-section but not in the section which is used by the ISO9660.
-
-The driver was developed on an AST PC with Intel 486/DX2, 8MB RAM, 340MB IDE
-hard disk and on an AST PC with Intel Pentium 60MHz, 16MB RAM, 520MB IDE
-running Linux kernel version 1.0.9 from the LST 1.8 Distribution. The kernel
-was compiled with gcc.2.5.8. My CD-ROM drive is an Aztech CDA268-01A. My
-drive says, that it has Firmware Version AZT26801A1.3. It came with an ISA-bus
-interface card and works with polled I/O without DMA and without interrupts.
-The code for all other drives was 'remote' tested and debugged by a number of
-volunteers on the Internet.
-
-Points, where I feel that possible problems might be and all points where I
-did not completely understand the drive's behaviour or trust my own code are
-marked with /*???*/ in the source code. There are also some parts in the
-Mitsumi driver, where I did not completely understand their code.
-
-
-10. ACKNOWLEDGMENTS
-Without the help of P.Bush, Aztech, who delivered technical information
-about the Aztech Drive and without the help of E.Moenkeberg, GWDG, who did a
-great job in analyzing the command structure of various CD-ROM drives, this
-work would not have been possible. E.Moenkeberg was also a great help in
-making the software 'kernel ready' and in answering many of the CDROM-related
-questions in the newsgroups. He really is *the* Linux CD-ROM guru. Thanks
-also to all the guys on the Internet, who collected valuable technical
-information about CDROMs.
-
-Joe Nardone (joe@access.digex.net) was a patient tester even for my first
-trial, which was more than slow, and made suggestions for code improvement.
-Especially the 'finite state machine' azt_poll() was rewritten by Joe to get
-clean C code and avoid the ugly 'gotos', which I copied from mcd.c.
-
-Robby Schirmer (schirmer@fmi.uni-passau.de) tested the audio stuff (ioctls)
-and suggested a lot of patches for them.
-
-Joseph Piskor and Peter Nugent were the first users with the ORCHID CD3110
-and also were very patient with the problems which occurred.
-
-Reinhard Max delivered the information for the CDROM-interface of the
-SoundWave32 soundcards.
-
-Jochen Kunz and Olaf Kaluza delivered the information for supporting Conrad's
-TXC drive.
-
-Hilmar Berger delivered the patches for supporting CyCDROM CR520ie.
-
-Anybody, who is interested in these items should have a look at 'ftp.gwdg.de',
-directory 'pub/linux/cdrom' and at 'ftp.cdrom.com', directory 'pub/cdrom'.
-
-11. PROGRAMMING ADD ONs: cdplay.c
-You can use the ioctl-functions included in aztcd.c in your own programs. As
-an example on how to do this, you will find a tiny CD Player for audio CDs
-named 'cdplay.c'. It allows you to play audio CDs. You can play a specified
-track, pause and resume or skip tracks forward and backwards. If you quit the
-program without stopping the drive, playing is continued. You can also
-(mis)use cdplay to read and hexdump data disks. You can find the code in the
-APPENDIX of this file, which you should cut out with an editor and store in a
-separate file 'cdplay.c'. To compile it and make it executable, do
- gcc -s -Wall -O2 -L/usr/lib cdplay.c -o /usr/local/bin/cdplay # compiles it
- chmod +755 /usr/local/bin/cdplay # makes it executable
- ln -s /dev/aztcd0 /dev/cdrom # creates a link
- (for /usr/lib substitute the top level directory, where your include files
- reside, and for /usr/local/bin the directory, where you want the executable
- binary to reside )
-
-You have to set the correct permissions for cdplay *and* for /dev/mcd0 or
-/dev/aztcd0 in order to use it. Remember, that you should not have /dev/cdrom
-mounted, when you're playing audio CDs.
-
-This program is just a hack for testing the ioctl-functions in aztcd.c. I will
-not maintain it, so if you run into problems, discard it or have a look into
-the source code 'cdplay.c'. The program does only contain a minimum of user
-protection and input error detection. If you use the commands in the wrong
-order or if you try to read a CD at wrong addresses, you may get error messages
-or even hang your machine. If you get STEN_LOW, STEN_LOW_WAIT or segment violation
-error messages when using cdplay, after that, the system might not be stable
-any more, so you'd better reboot. As the ioctl-functions run in kernel mode,
-most normal Linux-multitasking protection features do not work. By using
-uninitialized 'wild' pointers etc., it is easy to write to other users' data
-and program areas, destroy kernel tables etc.. So if you experiment with ioctls
-as always when you are doing systems programming and kernel hacking, you
-should have a backup copy of your system in a safe place (and you also
-should try restoring from a backup copy first)!
-
-A reworked and improved version called 'cdtester.c', which has yet more
-features for testing CDROM-drives can be found in
-Documentation/cdrom/sbpcd, written by E.Moenkeberg.
-
-Werner Zimmermann
-Fachhochschule fuer Technik Esslingen
-(EMail: Werner.Zimmermann@fht-esslingen.de)
-October, 1997
-
----------------------------------------------------------------------------
-APPENDIX: Source code of cdplay.c
-
-/* Tiny Audio CD Player
-
- Copyright 1994, 1995, 1996 Werner Zimmermann (Werner.Zimmermann@fht-esslingen.de)
-
-This program originally was written to test the audio functions of the
-AZTECH.CDROM-driver, but it should work with every CD-ROM drive. Before
-using it, you should set a symlink from /dev/cdrom to your real CDROM
-device.
-
-The GNU General Public License applies to this program.
-
-History: V0.1 W.Zimmermann: First release. Nov. 8, 1994
- V0.2 W.Zimmermann: Enhanced functionality. Nov. 9, 1994
- V0.3 W.Zimmermann: Additional functions. Nov. 28, 1994
- V0.4 W.Zimmermann: fixed some bugs. Dec. 17, 1994
- V0.5 W.Zimmermann: clean 'scanf' commands without compiler warnings
- Jan. 6, 1995
- V0.6 W.Zimmermann: volume control (still experimental). Jan. 24, 1995
- V0.7 W.Zimmermann: read raw modified. July 26, 95
-*/
-
-#include <stdio.h>
-#include <ctype.h>
-#include <sys/ioctl.h>
-#include <sys/types.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <linux/cdrom.h>
-#include <linux/../../drivers/cdrom/aztcd.h>
-
-void help(void)
-{ printf("Available Commands: STOP s EJECT/CLOSE e QUIT q\n");
- printf(" PLAY TRACK t PAUSE p RESUME r\n");
- printf(" NEXT TRACK n REPEAT LAST l HELP h\n");
- printf(" SUB CHANNEL c TRACK INFO i PLAY AT a\n");
- printf(" READ d READ RAW w VOLUME v\n");
-}
-
-int main(void)
-{ int handle;
- unsigned char command=' ', ini=0, first=1, last=1;
- unsigned int cmd, i,j,k, arg1,arg2,arg3;
- struct cdrom_ti ti;
- struct cdrom_tochdr tocHdr;
- struct cdrom_subchnl subchnl;
- struct cdrom_tocentry entry;
- struct cdrom_msf msf;
- union { struct cdrom_msf msf;
- unsigned char buf[CD_FRAMESIZE_RAW];
- } azt;
- struct cdrom_volctrl volctrl;
-
- printf("\nMini-Audio CD-Player V0.72 (C) 1994,1995,1996 W.Zimmermann\n");
- handle=open("/dev/cdrom",O_RDWR);
- ioctl(handle,CDROMRESUME);
-
- if (handle<=0)
- { printf("Drive Error: already playing, no audio disk, door open\n");
- printf(" or no permission (you must be ROOT in order to use this program)\n");
- }
- else
- { help();
- while (1)
- { printf("Type command (h = help): ");
- scanf("%s",&command);
- switch (command)
- { case 'e': cmd=CDROMEJECT;
- ioctl(handle,cmd);
- break;
- case 'p': if (!ini)
- { printf("Command not allowed - play track first\n");
- }
- else
- { cmd=CDROMPAUSE;
- if (ioctl(handle,cmd)) printf("Drive Error\n");
- }
- break;
- case 'r': if (!ini)
- { printf("Command not allowed - play track first\n");
- }
- else
- { cmd=CDROMRESUME;
- if (ioctl(handle,cmd)) printf("Drive Error\n");
- }
- break;
- case 's': cmd=CDROMPAUSE;
- if (ioctl(handle,cmd)) printf("Drive error or already stopped\n");
- cmd=CDROMSTOP;
- if (ioctl(handle,cmd)) printf("Drive error\n");
- break;
- case 't': cmd=CDROMREADTOCHDR;
- if (ioctl(handle,cmd,&tocHdr)) printf("Drive Error\n");
- first=tocHdr.cdth_trk0;
- last= tocHdr.cdth_trk1;
- if ((first==0)||(first>last))
- { printf ("--could not read TOC\n");
- }
- else
- { printf("--first track: %d --last track: %d --enter track number: ",first,last);
- cmd=CDROMPLAYTRKIND;
- scanf("%i",&arg1);
- ti.cdti_trk0=arg1;
- if (ti.cdti_trk0<first) ti.cdti_trk0=first;
- if (ti.cdti_trk0>last) ti.cdti_trk0=last;
- ti.cdti_ind0=0;
- ti.cdti_trk1=last;
- ti.cdti_ind1=0;
- if (ioctl(handle,cmd,&ti)) printf("Drive Error\n");
- ini=1;
- }
- break;
- case 'n': if (!ini++)
- { if (ioctl(handle,CDROMREADTOCHDR,&tocHdr)) printf("Drive Error\n");
- first=tocHdr.cdth_trk0;
- last= tocHdr.cdth_trk1;
- ti.cdti_trk0=first-1;
- }
- if ((first==0)||(first>last))
- { printf ("--could not read TOC\n");
- }
- else
- { cmd=CDROMPLAYTRKIND;
- if (++ti.cdti_trk0 > last) ti.cdti_trk0=last;
- ti.cdti_ind0=0;
- ti.cdti_trk1=last;
- ti.cdti_ind1=0;
- if (ioctl(handle,cmd,&ti)) printf("Drive Error\n");
- ini=1;
- }
- break;
- case 'l': if (!ini++)
- { if (ioctl(handle,CDROMREADTOCHDR,&tocHdr)) printf("Drive Error\n");
- first=tocHdr.cdth_trk0;
- last= tocHdr.cdth_trk1;
- ti.cdti_trk0=first+1;
- }
- if ((first==0)||(first>last))
- { printf ("--could not read TOC\n");
- }
- else
- { cmd=CDROMPLAYTRKIND;
- if (--ti.cdti_trk0 < first) ti.cdti_trk0=first;
- ti.cdti_ind0=0;
- ti.cdti_trk1=last;
- ti.cdti_ind1=0;
- if (ioctl(handle,cmd,&ti)) printf("Drive Error\n");
- ini=1;
- }
- break;
- case 'c': subchnl.cdsc_format=CDROM_MSF;
- if (ioctl(handle,CDROMSUBCHNL,&subchnl))
- printf("Drive Error\n");
- else
- { printf("AudioStatus:%s Track:%d Mode:%d MSF=%d:%d:%d\n", \
- subchnl.cdsc_audiostatus==CDROM_AUDIO_PLAY ? "PLAYING":"NOT PLAYING",\
- subchnl.cdsc_trk,subchnl.cdsc_adr, \
- subchnl.cdsc_absaddr.msf.minute, subchnl.cdsc_absaddr.msf.second, \
- subchnl.cdsc_absaddr.msf.frame);
- }
- break;
- case 'i': if (!ini)
- { printf("Command not allowed - play track first\n");
- }
- else
- { cmd=CDROMREADTOCENTRY;
- printf("Track No.: ");
- scanf("%d",&arg1);
- entry.cdte_track=arg1;
- if (entry.cdte_track<first) entry.cdte_track=first;
- if (entry.cdte_track>last) entry.cdte_track=last;
- entry.cdte_format=CDROM_MSF;
- if (ioctl(handle,cmd,&entry))
- { printf("Drive error or invalid track no.\n");
- }
- else
- { printf("Mode %d Track, starts at %d:%d:%d\n", \
- entry.cdte_adr,entry.cdte_addr.msf.minute, \
- entry.cdte_addr.msf.second,entry.cdte_addr.msf.frame);
- }
- }
- break;
- case 'a': cmd=CDROMPLAYMSF;
- printf("Address (min:sec:frame) ");
- scanf("%d:%d:%d",&arg1,&arg2,&arg3);
- msf.cdmsf_min0 =arg1;
- msf.cdmsf_sec0 =arg2;
- msf.cdmsf_frame0=arg3;
- if (msf.cdmsf_sec0 > 59) msf.cdmsf_sec0 =59;
- if (msf.cdmsf_frame0> 74) msf.cdmsf_frame0=74;
- msf.cdmsf_min1=60;
- msf.cdmsf_sec1=00;
- msf.cdmsf_frame1=00;
- if (ioctl(handle,cmd,&msf))
- { printf("Drive error or invalid address\n");
- }
- break;
-#ifdef AZT_PRIVATE_IOCTLS /*not supported by every CDROM driver*/
- case 'd': cmd=CDROMREADCOOKED;
- printf("Address (min:sec:frame) ");
- scanf("%d:%d:%d",&arg1,&arg2,&arg3);
- azt.msf.cdmsf_min0 =arg1;
- azt.msf.cdmsf_sec0 =arg2;
- azt.msf.cdmsf_frame0=arg3;
- if (azt.msf.cdmsf_sec0 > 59) azt.msf.cdmsf_sec0 =59;
- if (azt.msf.cdmsf_frame0> 74) azt.msf.cdmsf_frame0=74;
- if (ioctl(handle,cmd,&azt.msf))
- { printf("Drive error, invalid address or unsupported command\n");
- }
- k=0;
- getchar();
- for (i=0;i<128;i++)
- { printf("%4d:",i*16);
- for (j=0;j<16;j++)
- { printf("%2x ",azt.buf[i*16+j]);
- }
- for (j=0;j<16;j++)
- { if (isalnum(azt.buf[i*16+j]))
- printf("%c",azt.buf[i*16+j]);
- else
- printf(".");
- }
- printf("\n");
- k++;
- if (k>=20)
- { printf("press ENTER to continue\n");
- getchar();
- k=0;
- }
- }
- break;
- case 'w': cmd=CDROMREADRAW;
- printf("Address (min:sec:frame) ");
- scanf("%d:%d:%d",&arg1,&arg2,&arg3);
- azt.msf.cdmsf_min0 =arg1;
- azt.msf.cdmsf_sec0 =arg2;
- azt.msf.cdmsf_frame0=arg3;
- if (azt.msf.cdmsf_sec0 > 59) azt.msf.cdmsf_sec0 =59;
- if (azt.msf.cdmsf_frame0> 74) azt.msf.cdmsf_frame0=74;
- if (ioctl(handle,cmd,&azt))
- { printf("Drive error, invalid address or unsupported command\n");
- }
- k=0;
- for (i=0;i<147;i++)
- { printf("%4d:",i*16);
- for (j=0;j<16;j++)
- { printf("%2x ",azt.buf[i*16+j]);
- }
- for (j=0;j<16;j++)
- { if (isalnum(azt.buf[i*16+j]))
- printf("%c",azt.buf[i*16+j]);
- else
- printf(".");
- }
- printf("\n");
- k++;
- if (k>=20)
- { getchar();
- k=0;
- }
- }
- break;
-#endif
- case 'v': cmd=CDROMVOLCTRL;
- printf("--Channel 0 Left (0-255): ");
- scanf("%d",&arg1);
- printf("--Channel 1 Right (0-255): ");
- scanf("%d",&arg2);
- volctrl.channel0=arg1;
- volctrl.channel1=arg2;
- volctrl.channel2=0;
- volctrl.channel3=0;
- if (ioctl(handle,cmd,&volctrl))
- { printf("Drive error or unsupported command\n");
- }
- break;
- case 'q': if (close(handle)) printf("Drive Error: CLOSE\n");
- exit(0);
- case 'h': help();
- break;
- default: printf("unknown command\n");
- break;
- }
- }
- }
- return 0;
-}
diff --git a/Documentation/cdrom/cdu31a b/Documentation/cdrom/cdu31a
deleted file mode 100644
index c0667da09c00..000000000000
--- a/Documentation/cdrom/cdu31a
+++ /dev/null
@@ -1,196 +0,0 @@
-
- CDU31A/CDU33A Driver Info
- -------------------------
-
-Information on the Sony CDU31A/CDU33A CDROM driver for the Linux
-kernel.
-
- Corey Minyard (minyard@metronet.com)
-
- Colossians 3:17
-
-Crude Table of Contents
------------------------
-
- Setting Up the Hardware
- Configuring the Kernel
- Configuring as a Module
- Driver Special Features
-
-
-This device driver handles Sony CDU31A/CDU33A CDROM drives and
-provides a complete block-level interface as well as an ioctl()
-interface as specified in include/linux/cdrom.h). With this
-interface, CDROMs can be accessed, standard audio CDs can be played
-back normally, and CD audio information can be read off the drive.
-
-Note that this will only work for CDU31A/CDU33A drives. Some vendors
-market their drives as CDU31A compatible. They lie. Their drives are
-really CDU31A hardware interface compatible (they can plug into the
-same card). They are not software compatible.
-
-Setting Up the Hardware
------------------------
-
-The CDU31A driver is unable to safely tell if an interface card is
-present that it can use because the interface card does not announce
-its presence in any way besides placing 4 I/O locations in memory. It
-used to just probe memory and attempt commands, but Linus wisely asked
-me to remove that because it could really screw up other hardware in
-the system.
-
-Because of this, you must tell the kernel where the drive interface
-is, what interrupts are used, and possibly if you are on a PAS-16
-soundcard.
-
-If you have the Sony CDU31A/CDU33A drive interface card, the following
-diagram will help you set it up. If you have another card, you are on
-your own. You need to make sure that the I/O address and interrupt is
-not used by another card in the system. You will need to know the I/O
-address and interrupt you have set. Note that use of interrupts is
-highly recommended, if possible, it really cuts down on CPU used.
-Unfortunately, most soundcards do not support interrupts for their
-CDROM interfaces. By default, the Sony interface card comes with
-interrupts disabled.
-
- +----------+-----------------+----------------------+
- | JP1 | 34 Pin Conn | |
- | JP2 +-----------------+ |
- | JP3 |
- | JP4 |
- | +--+
- | | +-+
- | | | | External
- | | | | Connector
- | | | |
- | | +-+
- | +--+
- | |
- | +--------+
- | |
- +------------------------------------------+
-
- JP1 sets the Base Address, using the following settings:
-
- Address Pin 1 Pin 2
- ------- ----- -----
- 0x320 Short Short
- 0x330 Short Open
- 0x340 Open Short
- 0x360 Open Open
-
- JP2 and JP3 configure the DMA channel; they must be set the same.
-
- DMA Pin 1 Pin 2 Pin 3
- --- ----- ----- -----
- 1 On Off On
- 2 Off On Off
- 3 Off Off On
-
- JP4 Configures the IRQ:
-
- IRQ Pin 1 Pin 2 Pin 3 Pin 4
- --- ----- ----- ----- -----
- 3 Off Off On Off
- 4 Off Off* Off On
- 5 On Off Off Off
- 6 Off On Off Off
-
- The documentation states to set this for interrupt
- 4, but I think that is a mistake.
-
-Note that if you have another interface card, you will need to look at
-the documentation to find the I/O base address. This is specified to
-the SLCD.SYS driver for DOS with the /B: parameter, so you can look at
-you DOS driver setup to find the address, if necessary.
-
-Configuring the Kernel
-----------------------
-
-You must tell the kernel where the drive is at boot time. This can be
-done at the Linux boot prompt, by using LILO, or by using Bootlin.
-Note that this is no substitute for HOWTOs and LILO documentation, if
-you are confused please read those for info on bootline configuration
-and LILO.
-
-At the linux boot prompt, press the ALT key and add the following line
-after the boot name (you can let the kernel boot, it will tell you the
-default boot name while booting):
-
- cdu31a=<base address>,<interrupt>[,PAS]
-
-The base address needs to have "0x" in front of it, since it is in
-hex. For instance, to configure a drive at address 320 on interrupt 5,
-use the following:
-
- cdu31a=0x320,5
-
-I use the following boot line:
-
- cdu31a=0x1f88,0,PAS
-
-because I have a PAS-16 which does not support interrupt for the
-CDU31A interface.
-
-Adding this as an append line at the beginning of the /etc/lilo.conf
-file will set it for lilo configurations. I have the following as the
-first line in my lilo.conf file:
-
- append="cdu31a=0x1f88,0"
-
-I'm not sure how to set up Bootlin (I have never used it), if someone
-would like to fill in this section please do.
-
-
-Configuring as a Module
------------------------
-
-The driver supports loading as a module. However, you must specify
-the boot address and interrupt on the boot line to insmod. You can't
-use modprobe to load it, since modprobe doesn't support setting
-variables.
-
-Anyway, I use the following line to load my driver as a module
-
- /sbin/insmod /lib/modules/`uname -r`/misc/cdu31a.o cdu31a_port=0x1f88
-
-You can set the following variables in the driver:
-
- cdu31a_port=<I/O address> - sets the base I/O. If hex, put 0x in
- front of it. This must be specified.
-
- cdu31a_irq=<interrupt> - Sets the interrupt number. Leaving this
- off will turn interrupts off.
-
-
-Driver Special Features
------------------------
-
-This section describes features beyond the normal audio and CD-ROM
-functions of the drive.
-
-2048 byte buffer mode
-
-If a disk is mounted with -o block=2048, data is copied straight from
-the drive data port to the buffer. Otherwise, the readahead buffer
-must be involved to hold the other 1K of data when a 1K block
-operation is done. Note that with 2048 byte blocks you cannot execute
-files from the CD.
-
-XA compatibility
-
-The driver should support XA disks for both the CDU31A and CDU33A. It
-does this transparently, the using program doesn't need to set it.
-
-Multi-Session
-
-A multi-session disk looks just like a normal disk to the user. Just
-mount one normally, and all the data should be there. A special
-thanks to Koen for help with this!
-
-Raw sector I/O
-
-Using the CDROMREADAUDIO it is possible to read raw audio and data
-tracks. Both operations return 2352 bytes per sector. On the data
-tracks, the first 12 bytes is not returned by the drive and the value
-of that data is indeterminate.
diff --git a/Documentation/cdrom/cm206 b/Documentation/cdrom/cm206
deleted file mode 100644
index 810368f4f7c4..000000000000
--- a/Documentation/cdrom/cm206
+++ /dev/null
@@ -1,185 +0,0 @@
-This is the readme file for the driver for the Philips/LMS cdrom drive
-cm206 in combination with the cm260 host adapter card.
-
- (c) 1995 David A. van Leeuwen
-
-Changes since version 0.99
---------------------------
-- Interfacing to the kernel is routed though an extra interface layer,
- cdrom.c. This allows runtime-configurable `behavior' of the cdrom-drive,
- independent of the driver.
-
-Features since version 0.33
----------------------------
-- Full audio support, that is, both workman, workbone and cdp work
- now reasonably. Reading TOC still takes some time. xmcd has been
- reported to run successfully.
-- Made auto-probe code a little better, I hope
-
-Features since version 0.28
----------------------------
-- Full speed transfer rate (300 kB/s).
-- Minimum kernel memory usage for buffering (less than 3 kB).
-- Multisession support.
-- Tray locking.
-- Statistics of driver accessible to the user.
-- Module support.
-- Auto-probing of adapter card's base port and irq line,
- also configurable at boot time or module load time.
-
-
-Decide how you are going to use the driver. There are two
-options:
-
- (a) installing the driver as a resident part of the kernel
- (b) compiling the driver as a loadable module
-
- Further, you must decide if you are going to specify the base port
- address and the interrupt request line of the adapter card cm260 as
- boot options for (a), module parameters for (b), use automatic
- probing of these values, or hard-wire your adaptor card's settings
- into the source code. If you don't care, you can choose
- autoprobing, which is the default. In that case you can move on to
- the next step.
-
-Compiling the kernel
---------------------
-1) move to /usr/src/linux and do a
-
- make config
-
- If you have chosen option (a), answer yes to CONFIG_CM206 and
- CONFIG_ISO9660_FS.
-
- If you have chosen option (b), answer yes to CONFIG_MODVERSIONS
- and no (!) to CONFIG_CM206 and CONFIG_ISO9660_FS.
-
-2) then do a
-
- make clean; make zImage; make modules
-
-3) do the usual things to install a new image (backup the old one, run
- `rdev -R zImage 1', copy the new image in place, run lilo). Might
- be `make zlilo'.
-
-Using the driver as a module
-----------------------------
-If you will only occasionally use the cd-rom driver, you can choose
-option (b), install as a loadable module. You may have to re-compile
-the module when you upgrade the kernel to a new version.
-
-Since version 0.96, much of the functionality has been transferred to
-a generic cdrom interface in the file cdrom.c. The module cm206.o
-depends on cdrom.o. If the latter is not compiled into the kernel,
-you must explicitly load it before cm206.o:
-
- insmod /usr/src/linux/modules/cdrom.o
-
-To install the module, you use the command, as root
-
- insmod /usr/src/linux/modules/cm206.o
-
-You can specify the base address on the command line as well as the irq
-line to be used, e.g.
-
- insmod /usr/src/linux/modules/cm206.o cm206=0x300,11
-
-The order of base port and irq line doesn't matter; if you specify only
-one, the other will have the value of the compiled-in default. You
-may also have to install the file-system module `iso9660.o', if you
-didn't compile that into the kernel.
-
-
-Using the driver as part of the kernel
---------------------------------------
-If you have chosen option (a), you can specify the base-port
-address and irq on the lilo boot command line, e.g.:
-
- LILO: linux cm206=0x340,11
-
-This assumes that your linux kernel image keyword is `linux'.
-If you specify either IRQ (3--11) or base port (0x300--0x370),
-auto probing is turned off for both settings, thus setting the
-other value to the compiled-in default.
-
-Note that you can also put these parameters in the lilo configuration file:
-
-# linux config
-image = /vmlinuz
- root = /dev/hda1
- label = Linux
- append = "cm206=0x340,11"
- read-only
-
-
-If module parameters and LILO config options don't work
--------------------------------------------------------
-If autoprobing does not work, you can hard-wire the default values
-of the base port address (CM206_BASE) and interrupt request line
-(CM206_IRQ) into the file /usr/src/linux/drivers/cdrom/cm206.h. Change
-the defines of CM206_IRQ and CM206_BASE.
-
-
-Mounting the cdrom
-------------------
-1) Make sure that the right device is installed in /dev.
-
- mknod /dev/cm206cd b 32 0
-
-2) Make sure there is a mount point, e.g., /cdrom
-
- mkdir /cdrom
-
-3) mount using a command like this (run as root):
-
- mount -rt iso9660 /dev/cm206cd /cdrom
-
-4) For user-mounts, add a line in /etc/fstab
-
- /dev/cm206cd /cdrom iso9660 ro,noauto,user
-
- This will allow users to give the commands
-
- mount /cdrom
- umount /cdrom
-
-If things don't work
---------------------
-
-- Try to do a `dmesg' to find out if the driver said anything about
- what is going wrong during the initialization.
-
-- Try to do a `dd if=/dev/cm206cd | od -tc | less' to read from the
- CD.
-
-- Look in the /proc directory to see if `cm206' shows up under one of
- `interrupts', `ioports', `devices' or `modules' (if applicable).
-
-
-DISCLAIMER
-----------
-I cannot guarantee that this driver works, or that the hardware will
-not be harmed, although I consider it most unlikely.
-
-I hope that you'll find this driver in some way useful.
-
- David van Leeuwen
- david@tm.tno.nl
-
-Note for Linux CDROM vendors
------------------------------
-You are encouraged to include this driver on your Linux CDROM. If
-you do, you might consider sending me a free copy of that cd-rom.
-You can contact me through my e-mail address, david@tm.tno.nl.
-If this driver is compiled into a kernel to boot off a cdrom,
-you should actually send me a free copy of that cd-rom.
-
-Copyright
----------
-The copyright of the cm206 driver for Linux is
-
- (c) 1995 David A. van Leeuwen
-
-The driver is released under the conditions of the GNU general public
-license, which can be found in the file COPYING in the root of this
-source tree.
diff --git a/Documentation/cdrom/gscd b/Documentation/cdrom/gscd
deleted file mode 100644
index d01ca36b5c43..000000000000
--- a/Documentation/cdrom/gscd
+++ /dev/null
@@ -1,60 +0,0 @@
- Goldstar R420 CD-Rom device driver README
-
-For all kind of other information about the GoldStar R420 CDROM
-and this Linux device driver see the WWW page:
-
- http://linux.rz.fh-hannover.de/~raupach
-
-
- If you are the editor of a Linux CD, you should
- enable gscd.c within your boot floppy kernel. Please,
- send me one of your CDs for free.
-
-
-This current driver version 0.4a only supports reading data from the disk.
-Currently we have no audio and no multisession or XA support.
-The polling interface is used, no DMA.
-
-
-Sometimes the GoldStar R420 is sold in a 'Reveal Multimedia Kit'. This kit's
-drive interface is compatible, too.
-
-
-Installation
-------------
-
-Change to '/usr/src/linux/drivers/cdrom' and edit the file 'gscd.h'. Insert
-the i/o address of your interface card.
-
-The default base address is 0x340. This will work for most applications.
-Address selection is accomplished by jumpers PN801-1 to PN801-4 on the
-GoldStar Interface Card.
-Appropriate settings are: 0x300, 0x310, 0x320, 0x330, 0x340, 0x350, 0x360
-0x370, 0x380, 0x390, 0x3A0, 0x3B0, 0x3C0, 0x3D0, 0x3E0, 0x3F0
-
-Then go back to '/usr/src/linux/' and 'make config' to build the new
-configuration for your kernel. If you want to use the GoldStar driver
-like a module, don't select 'GoldStar CDROM support'. By the way, you
-have to include the iso9660 filesystem.
-
-Now start compiling the kernel with 'make zImage'.
-If you want to use the driver as a module, you have to do 'make modules'
-and 'make modules_install', additionally.
-Install your new kernel as usual - maybe you do it with 'make zlilo'.
-
-Before you can use the driver, you have to
- mknod /dev/gscd0 b 16 0
-to create the appropriate device file (you only need to do this once).
-
-If you use modules, you can try to insert the driver.
-Say: 'insmod /usr/src/linux/modules/gscd.o'
-or: 'insmod /usr/src/linux/modules/gscd.o gscd=<address>'
-The driver should report its results.
-
-That's it! Mount a disk, i.e. 'mount -rt iso9660 /dev/gscd0 /cdrom'
-
-Feel free to report errors and suggestions to the following address.
-Be sure, I'm very happy to receive your comments!
-
- Oliver Raupach Hannover, Juni 1995
-(raupach@nwfs1.rz.fh-hannover.de)
diff --git a/Documentation/cdrom/isp16 b/Documentation/cdrom/isp16
deleted file mode 100644
index cc86533ac9f3..000000000000
--- a/Documentation/cdrom/isp16
+++ /dev/null
@@ -1,100 +0,0 @@
- -- Documentation/cdrom/isp16
-
-Docs by Eric van der Maarel <H.T.M.v.d.Maarel@marin.nl>
-
-This is the README for version 0.6 of the cdrom interface on an
-ISP16, MAD16 or Mozart sound card.
-
-The detection and configuration of this interface used to be included
-in both the sjcd and optcd cdrom driver. Drives supported by these
-drivers came packed with Media Magic's multi media kit, which also
-included the ISP16 card. The idea (thanks Leo Spiekman)
-to move it from these drivers into a separate module and moreover, not to
-rely on the MAD16 sound driver, are as follows:
--duplication of code in the kernel is a waste of resources and should
- be avoided;
--however, kernels and notably those included with Linux distributions
- (cf Slackware 3.0 included version 0.5 of the isp16 configuration
- code included in the drivers) don't always come with sound support
- included. Especially when they already include a bunch of cdrom drivers.
- Hence, the cdrom interface should be configurable _independently_ of
- sound support.
-
-The ISP16, MAD16 and Mozart sound cards have an OPTi 82C928 or an
-OPTi 82C929 chip. The interface on these cards should work with
-any cdrom attached to the card, which is 'electrically' compatible
-with Sanyo/Panasonic, Sony or Mitsumi non-ide drives. However, the
-command sets for any proprietary drives may differ
-(and hence may not be supported in the kernel) from these four types.
-For a fact I know the interface works and the way of configuration
-as described in this documentation works in combination with the
-sjcd (in Sanyo/Panasonic compatibility mode) cdrom drivers
-(probably with the optcd (in Sony compatibility mode) as well).
-If you have such an OPTi based sound card and you want to use the
-cdrom interface with a cdrom drive supported by any of the other cdrom
-drivers, it will probably work. Please let me know any experience you
-might have).
-I understand that cards based on the OPTi 82C929 chips may be configured
-(hardware jumpers that is) as an IDE interface. Initialisation of such a
-card in this mode is not supported (yet?).
-
-The suggestion to configure the ISP16 etc. sound card by booting DOS and
-do a warm reboot to boot Linux somehow doesn't work, at least not
-on my machine (IPC P90), with the OPTi 82C928 based card.
-
-Booting the kernel through the boot manager LILO allows the use
-of some command line options on the 'LILO boot:' prompt. At boot time
-press Alt or Shift while the LILO prompt is written on the screen and enter
-any kernel options. Alternatively these options may be used in
-the appropriate section in /etc/lilo.conf. Adding 'append="<cmd_line_options>"'
-will do the trick as well.
-The syntax of 'cmd_line_options' is
-
- isp16=[<port>[,<irq>[,<dma>]]][[,]<drive_type>]
-
-If there is no ISP16 or compatibles detected, there's probably no harm done.
-These options indicate the values that your cdrom drive has been (or will be)
-configured to use.
-Valid values for the base i/o address are:
- port=0x340,0x320,0x330,0x360
-for the interrupt request number
- irq=0,3,5,7,9,10,11
-for the direct memory access line
- dma=0,3,5,6,7
-and for the type of drive
- drive_type=noisp16,Sanyo,Panasonic,Sony,Mitsumi.
-Note that these options are case sensitive.
-The values 0 for irq and dma indicate that they are not used, and
-the drive will be used in 'polling' mode. The values 5 and 7 for irq
-should be avoided in order to avoid any conflicts with optional
-sound card configuration.
-The syntax of the command line does not allow the specification of
-irq when there's nothing specified for the base address and no
-specification of dma when there is no specification of irq.
-The value 'noisp16' for drive_type, which may be used as the first
-non-integer option value (e.g. 'isp16=noisp16'), makes sure that probing
-for and subsequent configuration of an ISP16-compatible card is skipped
-all together. This can be useful to overcome possible conflicts which
-may arise while the kernel is probing your hardware.
-The default values are
- port=0x340
- irq=0
- dma=0
- drive_type=Sanyo
-reflecting my own configuration. The defaults can be changed in
-the file linux/drivers/cdrom/ips16.h.
-
-The cdrom interface can be configured at run time by loading the
-initialisation driver as a module. In that case, the interface
-parameters can be set by giving appropriate values on the command
-line. Configuring the driver can then be done by the following
-command (assuming you have iso16.o installed in a proper place):
-
- insmod isp16.o isp16_cdrom_base=<port> isp16_cdrom_irq=<irq> \
- isp16_cdrom_dma=<dma> isp16_cdrom_type=<drive_type>
-
-where port, irq, dma and drive_type can have any of the values mentioned
-above.
-
-
-Have fun!
diff --git a/Documentation/cdrom/mcdx b/Documentation/cdrom/mcdx
deleted file mode 100644
index 2bac4b7ff6da..000000000000
--- a/Documentation/cdrom/mcdx
+++ /dev/null
@@ -1,29 +0,0 @@
-If you are using the driver as a module, you can specify your ports and IRQs
-like
-
- # insmod mcdx.o mcdx=0x300,11,0x304,5
-
-and so on ("address,IRQ" pairs).
-This will override the configuration in mcdx.h.
-
-This driver:
-
- o handles XA and (hopefully) multi session CDs as well as
- ordinary CDs;
- o supports up to 5 drives (of course, you'll need free
- IRQs, i/o ports and slots);
- o plays audio
-
-This version doesn't support yet:
-
- o shared IRQs (but it seems to be possible - I've successfully
- connected two drives to the same irq. So it's `only' a
- problem of the driver.)
-
-This driver never will:
-
- o Read digital audio (i.e. copy directly), due to missing
- hardware features.
-
-
-heiko@lotte.sax.de
diff --git a/Documentation/cdrom/optcd b/Documentation/cdrom/optcd
deleted file mode 100644
index 6f46c7adb243..000000000000
--- a/Documentation/cdrom/optcd
+++ /dev/null
@@ -1,57 +0,0 @@
-This is the README file for the Optics Storage 8000 AT CDROM device driver.
-
-This is the driver for the so-called 'DOLPHIN' drive, with the 34-pin
-Sony-compatible interface. For the IDE-compatible Optics Storage 8001
-drive, you will want the ATAPI CDROM driver. The driver also seems to
-work with the Lasermate CR328A. If you have a drive that works with
-this driver, and that doesn't report itself as DOLPHIN, please drop me
-a mail.
-
-The support for multisession CDs is in ALPHA stage. If you use it,
-please mail me your experiences. Multisession support can be disabled
-at compile time.
-
-You can find some older versions of the driver at
- dutette.et.tudelft.nl:/pub/linux/
-and at Eberhard's mirror
- ftp.gwdg.de:/pub/linux/cdrom/drivers/optics/
-
-Before you can use the driver, you have to create the device file once:
- # mknod /dev/optcd0 b 17 0
-
-To specify the base address if the driver is "compiled-in" to your kernel,
-you can use the kernel command line item (LILO option)
- optcd=0x340
-with the right address.
-
-If you have compiled optcd as a module, you can load it with
- # insmod /usr/src/linux/modules/optcd.o
-or
- # insmod /usr/src/linux/modules/optcd.o optcd=0x340
-with the matching address value of your interface card.
-
-The driver employs a number of buffers to do read-ahead and block size
-conversion. The number of buffers is configurable in optcd.h, and has
-influence on the driver performance. For my machine (a P75), 6 buffers
-seems optimal, as can be seen from this table:
-
-#bufs kb/s %cpu
-1 97 0.1
-2 191 0.3
-3 188 0.2
-4 246 0.3
-5 189 19
-6 280 0.4
-7 281 7.0
-8 246 2.8
-16 281 3.4
-
-If you get a throughput significantly below 300 kb/s, try tweaking
-N_BUFS, and don't forget to mail me your results!
-
-I'd appreciate success/failure reports. If you find a bug, try
-recompiling the driver with some strategically chosen debug options
-(these can be found in optcd.h) and include the messages generated in
-your bug report. Good luck.
-
-Leo Spiekman (spiekman@dutette.et.tudelft.nl)
diff --git a/Documentation/cdrom/sbpcd b/Documentation/cdrom/sbpcd
deleted file mode 100644
index b3ba63f4ce3e..000000000000
--- a/Documentation/cdrom/sbpcd
+++ /dev/null
@@ -1,1061 +0,0 @@
-This README belongs to release 4.2 or newer of the SoundBlaster Pro
-(Matsushita, Kotobuki, Panasonic, CreativeLabs, Longshine and Teac)
-CD-ROM driver for Linux.
-
-sbpcd really, really is NOT for ANY IDE/ATAPI drive!
-Not even if you have an "original" SoundBlaster card with an IDE interface!
-So, you'd better have a look into README.ide if your port address is 0x1F0,
-0x170, 0x1E8, 0x168 or similar.
-I get tons of mails from IDE/ATAPI drive users - I really can't continue
-any more to answer them all. So, if your drive/interface information sheets
-mention "IDE" (primary, secondary, tertiary, quaternary) and the DOS driver
-invoking line within your CONFIG.SYS is using an address below 0x230:
-DON'T ROB MY LAST NERVE - jumper your interface to address 0x170 and IRQ 15
-(that is the "secondary IDE" configuration), set your drive to "master" and
-use ide-cd as your driver. If you do not have a second IDE hard disk, use the
-LILO commands
- hdb=noprobe hdc=cdrom
-and get lucky.
-To make it fully clear to you: if you mail me about IDE/ATAPI drive problems,
-my answer is above, and I simply will discard your mail, hoping to stop the
-flood and to find time to lead my 12-year old son towards happy computing.
-
-The driver is able to drive the whole family of "traditional" AT-style (that
-is NOT the new "Enhanced IDE" or "ATAPI" drive standard) Matsushita,
-Kotobuki, Panasonic drives, sometimes labelled as "CreativeLabs". The
-well-known drives are CR-521, CR-522, CR-523, CR-562, CR-563.
-CR-574 is an IDE/ATAPI drive.
-
-The Longshine LCS-7260 is a double-speed drive which uses the "old"
-Matsushita command set. It is supported - with help by Serge Robyns.
-Vertos ("Elitegroup Computer Systems", ECS) has a similar drive - support
-has started; get in contact if you have such a "Vertos 100" or "ECS-AT"
-drive.
-
-There exists an "IBM External ISA CD-ROM Drive" which in fact is a CR-563
-with a special controller board. This drive is supported (the interface is
-of the "LaserMate" type), and it is possibly the best buy today (cheaper than
-an internal drive, and you can use it as an internal, too - e.g. plug it into
-a soundcard).
-
-CreativeLabs has a new drive "CD200" and a similar drive "CD200F". The latter
-is made by Funai and sometimes named "E2550UA", newer models may be named
-"MK4015". The CD200F drives should fully work.
-CD200 drives without "F" are still giving problems: drive detection and
-playing audio should work, data access will result in errors. I need qualified
-feedback about the bugs within the data functions or a drive (I never saw a
-CD200).
-
-The quad-speed Teac CD-55A drive is supported, but still does not reach "full
-speed". The data rate already reaches 500 kB/sec if you set SBP_BUFFER_FRAMES
-to 64 (it is not recommended to do that for normal "file access" usage, but it
-can speed up things a lot if you use something like "dd" to read from the
-drive; I use it for verifying self-written CDs this way).
-The drive itself is able to deliver 600 kB/sec, so this needs
-work; with the normal setup, the performance currently is not even as good as
-double-speed.
-
-This driver is NOT for Mitsumi or Sony or Aztech or Philips or XXX drives,
-and again: this driver is in no way usable for any IDE/ATAPI drive. If you
-think your drive should work and it doesn't: send me the DOS driver for your
-beast (gzipped + uuencoded) and your CONFIG.SYS if you want to ask me for help,
-and include an original log message excerpt, and try to give all information
-a complete idiot needs to understand your hassle already with your first
-mail. And if you want to say "as I have mailed you before", be sure that I
-don't remember your "case" by such remarks; at the moment, I have some
-hundreds of open correspondences about Linux CDROM questions (hope to reduce if
-the IDE/ATAPI user questions disappear).
-
-
-This driver will work with the soundcard interfaces (SB Pro, SB 16, Galaxy,
-SoundFX, Mozart, MAD16 ...) and with the "no-sound" cards (Panasonic CI-101P,
-LaserMate, WDH-7001C, Longshine LCS-6853, Teac ...).
-
-It works with the "configurable" interface "Sequoia S-1000", too, which is
-used on the Spea Media FX and Ensonic Soundscape sound cards. You have to
-specify the type "SBPRO 2" and the true CDROM port address with it, not the
-"configuration port" address.
-
-If you have a sound card which needs a "configuration driver" instead of
-jumpers for interface types and addresses (like Mozart cards) - those
-drivers get invoked before the DOS CDROM driver in your CONFIG.SYS, typical
-names are "cdsetup.sys" and "mztinit.sys" - let the sound driver do the
-CDROM port configuration (the leading comments in linux/drivers/sound/mad16.c
-are just for you!). Hannu Savolainen's mad16.c code is able to set up my
-Mozart card - I simply had to add
- #define MAD16_CONF 0x06
- #define MAD16_CDSEL 0x03
-to configure the CDROM interface for type "Panasonic" (LaserMate) and address
-0x340.
-
-The interface type has to get configured in linux/drivers/cdrom/sbpcd.h,
-because the register layout is different between the "SoundBlaster" and the
-"LaserMate" type.
-
-I got a report that the Teac interface card "I/F E117098" is of type
-"SoundBlaster" (i.e. you have to set SBPRO to 1) even with the addresses
-0x300 and above. This is unusual, and it can't get covered by the auto
-probing scheme.
-The Teac 16-bit interface cards (like P/N E950228-00A, default address 0x2C0)
-need the SBPRO 3 setup.
-
-If auto-probing found the drive, the address is correct. The reported type
-may be wrong. A "mount" will give success only if the interface type is set
-right. Playing audio should work with a wrong set interface type, too.
-
-With some Teac and some CD200 drives I have seen interface cards which seem
-to lack the "drive select" lines; always drive 0 gets addressed. To avoid
-"mirror drives" (four drives detected where you only have one) with such
-interface cards, set MAX_DRIVES to 1 and jumper your drive to ID 0 (if
-possible).
-
-
-Up to 4 drives per interface card, and up to 4 interface cards are supported.
-All supported drive families can be mixed, but the CR-521 drives are
-hard-wired to drive ID 0. The drives have to use different drive IDs, and each
-drive has to get a unique minor number (0...3), corresponding indirectly to
-its drive ID.
-The drive IDs may be selected freely from 0 to 3 - they do not have to be in
-consecutive order.
-
-As Don Carroll, don@ds9.us.dell.com or FIDO 1:382/14, told me, it is possible
-to change old drives to any ID, too. He writes in this sense:
- "In order to be able to use more than one single speed drive
- (they do not have the ID jumpers) you must add a DIP switch
- and two resistors. The pads are already on the board next to
- the power connector. You will see the silkscreen for the
- switch if you remove the top cover.
- 1 2 3 4
- ID 0 = x F F x O = "on"
- ID 1 = x O F x F = "off"
- ID 2 = x F O x x = "don't care"
- ID 3 = x O O x
- Next to the switch are the positions for R76 (7k) and R78
- (12k). I had to play around with the resistor values - ID 3
- did not work with other values. If the values are not good,
- ID 3 behaves like ID 0."
-
-To use more than 4 drives, you simply need a second controller card at a
-different address and a second cable.
-
-The driver supports reading of data from the CD and playing of audio tracks.
-The audio part should run with WorkMan, xcdplayer, with the "non-X11" products
-CDplayer and WorkBone - tell me if it is not compatible with other software.
-The only accepted measure for correctness with the audio functions is the
-"cdtester" utility (appended) - most audio player programmers seem to be
-better musicians than programmers. ;-)
-
-With the CR-56x and the CD200 drives, the reading of audio frames is possible.
-This is implemented by an IOCTL function which reads READ_AUDIO frames of
-2352 bytes at once (configurable with the "READ_AUDIO" define, default is 0).
-Reading the same frame a second time gives different data; the frame data
-start at a different position, but all read bytes are valid, and we always
-read 98 consecutive chunks (of 24 Bytes) as a frame. Reading more than 1 frame
-at once possibly misses some chunks at each frame boundary. This lack has to
-get corrected by external, "higher level" software which reads the same frame
-again and tries to find and eliminate overlapping chunks (24-byte-pieces).
-
-The transfer rate with reading audio (1-frame-pieces) currently is very slow.
-This can be better reading bigger chunks, but the "missing" chunks possibly
-occur at the beginning of each single frame.
-The software interface possibly may change a bit the day the SCSI driver
-supports it too.
-
-With all but the CR-52x drives, MultiSession is supported.
-Photo CDs work (the "old" drives like CR-521 can access only the first
-session of a photoCD).
-At ftp.gwdg.de:/pub/linux/hpcdtoppm/ you will find Hadmut Danisch's package to
-convert photo CD image files and Gerd Knorr's viewing utility.
-
-The transfer rate will reach 150 kB/sec with CR-52x drives, 300 kB/sec with
-CR-56x drives, and currently not more than 500 kB/sec (usually less than
-250 kB/sec) with the Teac quad speed drives.
-XA (PhotoCD) disks with "old" drives give only 50 kB/sec.
-
-This release consists of
-- this README file
-- the driver file linux/drivers/cdrom/sbpcd.c
-- the stub files linux/drivers/cdrom/sbpcd[234].c
-- the header file linux/drivers/cdrom/sbpcd.h.
-
-
-To install:
------------
-
-1. Setup your hardware parameters. Though the driver does "auto-probing" at a
- lot of (not all possible!) addresses, this step is recommended for
- everyday use. You should let sbpcd auto-probe once and use the reported
- address if a drive got found. The reported type may be incorrect; it is
- correct if you can mount a data CD. There is no choice for you with the
- type; only one is right, the others are deadly wrong.
-
- a. Go into /usr/src/linux/drivers/cdrom/sbpcd.h and configure it for your
- hardware (near the beginning):
- a1. Set it up for the appropriate type of interface board.
- "Original" CreativeLabs sound cards need "SBPRO 1".
- Most "compatible" sound cards (almost all "non-CreativeLabs" cards)
- need "SBPRO 0".
- The "no-sound" board from OmniCd needs the "SBPRO 1" setup.
- The Teac 8-bit "no-sound" boards need the "SBPRO 1" setup.
- The Teac 16-bit "no-sound" boards need the "SBPRO 3" setup.
- All other "no-sound" boards need the "SBPRO 0" setup.
- The Spea Media FX and Ensoniq SoundScape cards need "SBPRO 2".
- sbpcd.c holds some examples in its auto-probe list.
- If you configure "SBPRO" wrong, the playing of audio CDs will work,
- but you will not be able to mount a data CD.
- a2. Tell the address of your CDROM_PORT (not of the sound port).
- a3. If 4 drives get found, but you have only one, set MAX_DRIVES to 1.
- a4. Set DISTRIBUTION to 0.
- b. Additionally for 2.a1 and 2.a2, the setup may be done during
- boot time (via the "kernel command line" or "LILO option"):
- sbpcd=0x320,LaserMate
- or
- sbpcd=0x230,SoundBlaster
- or
- sbpcd=0x338,SoundScape
- or
- sbpcd=0x2C0,Teac16bit
- This is especially useful if you install a fresh distribution.
- If the second parameter is a number, it gets taken as the type
- setting; 0 is "LaserMate", 1 is "SoundBlaster", 2 is "SoundScape",
- 3 is "Teac16bit".
- So, for example
- sbpcd=0x230,1
- is equivalent to
- sbpcd=0x230,SoundBlaster
-
-2. "cd /usr/src/linux" and do a "make config" and select "y" for Matsushita
- CD-ROM support and for ISO9660 FileSystem support. If you do not have a
- second, third, or fourth controller installed, do not say "y" to the
- secondary Matsushita CD-ROM questions.
-
-3. Then make the kernel image ("make zlilo" or similar).
-
-4. Make the device file(s). This step usually already has been done by the
- MAKEDEV script.
- The driver uses MAJOR 25, so, if necessary, do
- mknod /dev/sbpcd b 25 0 (if you have only one drive)
- and/or
- mknod /dev/sbpcd0 b 25 0
- mknod /dev/sbpcd1 b 25 1
- mknod /dev/sbpcd2 b 25 2
- mknod /dev/sbpcd3 b 25 3
- to make the node(s).
-
- The "first found" drive gets MINOR 0 (regardless of its jumpered ID), the
- "next found" (at the same cable) gets MINOR 1, ...
-
- For a second interface board, you have to make nodes like
- mknod /dev/sbpcd4 b 26 0
- mknod /dev/sbpcd5 b 26 1
- and so on. Use the MAJORs 26, 27, 28.
-
- If you further make a link like
- ln -s sbpcd /dev/cdrom
- you can use the name /dev/cdrom, too.
-
-5. Reboot with the new kernel.
-
-You should now be able to do
- mkdir /CD
-and
- mount -rt iso9660 /dev/sbpcd /CD
-or
- mount -rt iso9660 -o block=2048 /dev/sbpcd /CD
-and see the contents of your CD in the /CD directory.
-To use audio CDs, a mounting is not recommended (and it would fail if the
-first track is not a data track).
-
-
-Using sbpcd as a "loadable module":
------------------------------------
-
-If you do NOT select "Matsushita/Panasonic CDROM driver support" during the
-"make config" of your kernel, you can build the "loadable module" sbpcd.o.
-
-If sbpcd gets used as a module, the support of more than one interface
-card (i.e. drives 4...15) is disabled.
-
-You can specify interface address and type with the "insmod" command like:
- # insmod /usr/src/linux/modules/sbpcd.o sbpcd=0x340,0
-or
- # insmod /usr/src/linux/modules/sbpcd.o sbpcd=0x230,1
-or
- # insmod /usr/src/linux/modules/sbpcd.o sbpcd=0x338,2
-where the last number represents the SBPRO setting (no strings allowed here).
-
-
-Things of interest:
--------------------
-
-The driver is configured to try the LaserMate type of interface at I/O port
-0x0340 first. If this is not appropriate, sbpcd.h should get changed
-(you will find the right place - just at the beginning).
-
-No DMA and no IRQ is used.
-
-To reduce or increase the amount of kernel messages, edit sbpcd.c and play
-with the "DBG_xxx" switches (initialization of the variable "sbpcd_debug").
-Don't forget to reflect on what you do; enabling all DBG_xxx switches at once
-may crash your system, and each message line is accompanied by a delay.
-
-The driver uses the "variable BLOCK_SIZE" feature. To use it, you have to
-specify "block=2048" as a mount option. Doing this will disable the direct
-execution of a binary from the CD; you have to copy it to a device with the
-standard BLOCK_SIZE (1024) first. So, do not use this if your system is
-directly "running from the CDROM" (like some of Yggdrasil's installation
-variants). There are CDs on the market (like the German "unifix" Linux
-distribution) which MUST get handled with a block_size of 1024. Generally,
-one can say all the CDs which hold files of the name YMTRANS.TBL are defective;
-do not use block=2048 with those.
-
-Within sbpcd.h, you will find some "#define"s (e.g. EJECT and JUKEBOX). With
-these, you can configure the driver for some special things.
-You can use the appended program "cdtester" to set the auto-eject feature
-during runtime. Jeff Tranter's "eject" utility can do this, too (and more)
-for you.
-
-There is an ioctl CDROMMULTISESSION to obtain with a user program if
-the CD is an XA disk and - if it is - where the last session starts. The
-"cdtester" program illustrates how to call it.
-
-
-Auto-probing at boot time:
---------------------------
-
-The driver does auto-probing at many well-known interface card addresses,
-but not all:
-Some probings can cause a hang if an NE2000 ethernet card gets touched, because
-SBPCD's auto-probing happens before the initialization of the net drivers.
-Those "hazardous" addresses are excluded from auto-probing; the "kernel
-command line" feature has to be used during installation if you have your
-drive at those addresses. The "module" version is allowed to probe at those
-addresses, too.
-
-The auto-probing looks first at the configured address resp. the address
-submitted by the kernel command line. With this, it is possible to use this
-driver within installation boot floppies, and for any non-standard address,
-too.
-
-Auto-probing will make an assumption about the interface type ("SBPRO" or not),
-based upon the address. That assumption may be wrong (initialization will be
-o.k., but you will get I/O errors during mount). In that case, use the "kernel
-command line" feature and specify address & type at boot time to find out the
-right setup.
-
-For everyday use, address and type should get configured within sbpcd.h. That
-will stop the auto-probing due to success with the first try.
-
-The kernel command "sbpcd=0" suppresses each auto-probing and causes
-the driver not to find any drive; it is meant for people who love sbpcd
-so much that they do not want to miss it, even if they miss the drives. ;-)
-
-If you configure "#define CDROM_PORT 0" in sbpcd.h, the auto-probing is
-initially disabled and needs an explicit kernel command to get activated.
-Once activated, it does not stop before success or end-of-list. This may be
-useful within "universal" CDROM installation boot floppies (but using the
-loadable module would be better because it allows an "extended" auto-probing
-without fearing NE2000 cards).
-
-To shorten the auto-probing list to a single entry, set DISTRIBUTION 0 within
-sbpcd.h.
-
-
-Setting up address and interface type:
---------------------------------------
-
-If your I/O port address is not 0x340, you have to look for the #defines near
-the beginning of sbpcd.h and configure them: set SBPRO to 0 or 1 or 2, and
-change CDROM_PORT to the address of your CDROM I/O port.
-
-Almost all of the "SoundBlaster compatible" cards behave like the no-sound
-interfaces, i.e. need SBPRO 0!
-
-With "original" SB Pro cards, an initial setting of CD_volume through the
-sound card's MIXER register gets done.
-If you are using a "compatible" sound card of types "LaserMate" or "SPEA",
-you can set SOUND_BASE (in sbpcd.h) to get it done with your card, too...
-
-
-Using audio CDs:
-----------------
-
-Workman, WorkBone, xcdplayer, cdplayer and the nice little tool "cdplay" (see
-README.aztcd from the Aztech driver package) should work.
-
-The program CDplayer likes to talk to "/dev/mcd" only, xcdplayer wants
-"/dev/rsr0", workman loves "/dev/sr0" or "/dev/cdrom" - so, make the
-appropriate links to use them without the need to supply parameters.
-
-
-Copying audio tracks:
----------------------
-
-The following program will copy track 1 (or a piece of it) from an audio CD
-into the file "track01":
-
-/*=================== begin program ========================================*/
-/*
- * read an audio track from a CD
- *
- * (c) 1994 Eberhard Moenkeberg <emoenke@gwdg.de>
- * may be used & enhanced freely
- *
- * Due to non-existent sync bytes at the beginning of each audio frame (or due
- * to a firmware bug within all known drives?), it is currently a kind of
- * fortune if two consecutive frames fit together.
- * Usually, they overlap, or a little piece is missing. This happens in units
- * of 24-byte chunks. It has to get fixed by higher-level software (reading
- * until an overlap occurs, and then eliminate the overlapping chunks).
- * ftp.gwdg.de:/pub/linux/misc/cdda2wav-sbpcd.*.tar.gz holds an example of
- * such an algorithm.
- * This example program further is missing to obtain the SubChannel data
- * which belong to each frame.
- *
- * This is only an example of the low-level access routine. The read data are
- * pure 16-bit CDDA values; they have to get converted to make sound out of
- * them.
- * It is no fun to listen to it without prior overlap/underlap correction!
- */
-#include <stdio.h>
-#include <sys/ioctl.h>
-#include <sys/types.h>
-#include <linux/cdrom.h>
-
-static struct cdrom_tochdr hdr;
-static struct cdrom_tocentry entry[101];
-static struct cdrom_read_audio arg;
-static u_char buffer[CD_FRAMESIZE_RAW];
-static int datafile, drive;
-static int i, j, limit, track, err;
-static char filename[32];
-
-int main(int argc, char *argv[])
-{
-/*
- * open /dev/cdrom
- */
- drive=open("/dev/cdrom", 0);
- if (drive<0)
- {
- fprintf(stderr, "can't open drive.\n");
- exit (-1);
- }
-/*
- * get TocHeader
- */
- fprintf(stdout, "getting TocHeader...\n");
- err=ioctl(drive, CDROMREADTOCHDR, &hdr);
- if (err!=0)
- {
- fprintf(stderr, "can't get TocHeader (error %d).\n", err);
- exit (-1);
- }
- else
- fprintf(stdout, "TocHeader: %d %d\n", hdr.cdth_trk0, hdr.cdth_trk1);
-/*
- * get and display all TocEntries
- */
- fprintf(stdout, "getting TocEntries...\n");
- for (i=1;i<=hdr.cdth_trk1+1;i++)
- {
- if (i!=hdr.cdth_trk1+1) entry[i].cdte_track = i;
- else entry[i].cdte_track = CDROM_LEADOUT;
- entry[i].cdte_format = CDROM_LBA;
- err=ioctl(drive, CDROMREADTOCENTRY, &entry[i]);
- if (err!=0)
- {
- fprintf(stderr, "can't get TocEntry #%d (error %d).\n", i, err);
- exit (-1);
- }
- else
- {
- fprintf(stdout, "TocEntry #%d: %1X %1X %06X %02X\n",
- entry[i].cdte_track,
- entry[i].cdte_adr,
- entry[i].cdte_ctrl,
- entry[i].cdte_addr.lba,
- entry[i].cdte_datamode);
- }
- }
- fprintf(stdout, "got all TocEntries.\n");
-/*
- * ask for track number (not implemented here)
- */
-track=1;
-#if 0 /* just read a little piece (4 seconds) */
-entry[track+1].cdte_addr.lba=entry[track].cdte_addr.lba+300;
-#endif
-/*
- * read track into file
- */
- sprintf(filename, "track%02d\0", track);
- datafile=creat(filename, 0755);
- if (datafile<0)
- {
- fprintf(stderr, "can't open datafile %s.\n", filename);
- exit (-1);
- }
- arg.addr.lba=entry[track].cdte_addr.lba;
- arg.addr_format=CDROM_LBA; /* CDROM_MSF would be possible here, too. */
- arg.nframes=1;
- arg.buf=&buffer[0];
- limit=entry[track+1].cdte_addr.lba;
- for (;arg.addr.lba<limit;arg.addr.lba++)
- {
- err=ioctl(drive, CDROMREADAUDIO, &arg);
- if (err!=0)
- {
- fprintf(stderr, "can't read abs. frame #%d (error %d).\n",
- arg.addr.lba, err);
- }
- j=write(datafile, &buffer[0], CD_FRAMESIZE_RAW);
- if (j!=CD_FRAMESIZE_RAW)
- {
- fprintf(stderr,"I/O error (datafile) at rel. frame %d\n",
- arg.addr.lba-entry[track].cdte_addr.lba);
- }
- arg.addr.lba++;
- }
- return 0;
-}
-/*===================== end program ========================================*/
-
-At ftp.gwdg.de:/pub/linux/misc/cdda2wav-sbpcd.*.tar.gz is an adapted version of
-Heiko Eissfeldt's digital-audio to .WAV converter (the original is there, too).
-This is preliminary, as Heiko himself will care about it.
-
-
-Known problems:
----------------
-
-Currently, the detection of disk change or removal is actively disabled.
-
-Most attempts to read the UPC/EAN code result in a stream of zeroes. All my
-drives are mostly telling there is no UPC/EAN code on disk or there is, but it
-is an all-zero number. I guess now almost no CD holds such a number.
-
-Bug reports, comments, wishes, donations (technical information is a donation,
-too :-) etc. to emoenke@gwdg.de.
-
-SnailMail address, preferable for CD editors if they want to submit a free
-"cooperation" copy:
- Eberhard Moenkeberg
- Reinholdstr. 14
- D-37083 Goettingen
- Germany
----
-
-
-Appendix -- the "cdtester" utility:
-
-/*
- * cdtester.c -- test the audio functions of a CD driver
- *
- * (c) 1995 Eberhard Moenkeberg <emoenke@gwdg.de>
- * published under the GPL
- *
- * made under heavy use of the "Tiny Audio CD Player"
- * from Werner Zimmermann <zimmerma@rz.fht-esslingen.de>
- * (see linux/drivers/block/README.aztcd)
- */
-#undef AZT_PRIVATE_IOCTLS /* not supported by every CDROM driver */
-#define SBP_PRIVATE_IOCTLS /* not supported by every CDROM driver */
-
-#include <stdio.h>
-#include <stdio.h>
-#include <malloc.h>
-#include <sys/ioctl.h>
-#include <sys/types.h>
-#include <linux/cdrom.h>
-
-#ifdef AZT_PRIVATE_IOCTLS
-#include <linux/../../drivers/cdrom/aztcd.h>
-#endif /* AZT_PRIVATE_IOCTLS */
-#ifdef SBP_PRIVATE_IOCTLS
-#include <linux/../../drivers/cdrom/sbpcd.h>
-#include <linux/fs.h>
-#endif /* SBP_PRIVATE_IOCTLS */
-
-struct cdrom_tochdr hdr;
-struct cdrom_tochdr tocHdr;
-struct cdrom_tocentry TocEntry[101];
-struct cdrom_tocentry entry;
-struct cdrom_multisession ms_info;
-struct cdrom_read_audio read_audio;
-struct cdrom_ti ti;
-struct cdrom_subchnl subchnl;
-struct cdrom_msf msf;
-struct cdrom_volctrl volctrl;
-#ifdef AZT_PRIVATE_IOCTLS
-union
-{
- struct cdrom_msf msf;
- unsigned char buf[CD_FRAMESIZE_RAW];
-} azt;
-#endif /* AZT_PRIVATE_IOCTLS */
-int i, i1, i2, i3, j, k;
-unsigned char sequence=0;
-unsigned char command[80];
-unsigned char first=1, last=1;
-char *default_device="/dev/cdrom";
-char dev[20];
-char filename[20];
-int drive;
-int datafile;
-int rc;
-
-void help(void)
-{
- printf("Available Commands:\n");
- printf("STOP s EJECT e QUIT q\n");
- printf("PLAY TRACK t PAUSE p RESUME r\n");
- printf("NEXT TRACK n REPEAT LAST l HELP h\n");
- printf("SUBCHANNEL_Q c TRACK INFO i PLAY AT a\n");
- printf("READ d READ RAW w READ AUDIO A\n");
- printf("MS-INFO M TOC T START S\n");
- printf("SET EJECTSW X DEVICE D DEBUG Y\n");
- printf("AUDIO_BUFSIZ Z RESET R SET VOLUME v\n");
- printf("GET VOLUME V\n");
-}
-
-/*
- * convert MSF number (3 bytes only) to Logical_Block_Address
- */
-int msf2lba(u_char *msf)
-{
- int i;
-
- i=(msf[0] * CD_SECS + msf[1]) * CD_FRAMES + msf[2] - CD_BLOCK_OFFSET;
- if (i<0) return (0);
- return (i);
-}
-/*
- * convert logical_block_address to m-s-f_number (3 bytes only)
- */
-void lba2msf(int lba, unsigned char *msf)
-{
- lba += CD_BLOCK_OFFSET;
- msf[0] = lba / (CD_SECS*CD_FRAMES);
- lba %= CD_SECS*CD_FRAMES;
- msf[1] = lba / CD_FRAMES;
- msf[2] = lba % CD_FRAMES;
-}
-
-int init_drive(char *dev)
-{
- unsigned char msf_ent[3];
-
- /*
- * open the device
- */
- drive=open(dev,0);
- if (drive<0) return (-1);
- /*
- * get TocHeader
- */
- printf("getting TocHeader...\n");
- rc=ioctl(drive,CDROMREADTOCHDR,&hdr);
- if (rc!=0)
- {
- printf("can't get TocHeader (error %d).\n",rc);
- return (-2);
- }
- else
- first=hdr.cdth_trk0;
- last=hdr.cdth_trk1;
- printf("TocHeader: %d %d\n",hdr.cdth_trk0,hdr.cdth_trk1);
- /*
- * get and display all TocEntries
- */
- printf("getting TocEntries...\n");
- for (i=1;i<=hdr.cdth_trk1+1;i++)
- {
- if (i!=hdr.cdth_trk1+1) TocEntry[i].cdte_track = i;
- else TocEntry[i].cdte_track = CDROM_LEADOUT;
- TocEntry[i].cdte_format = CDROM_LBA;
- rc=ioctl(drive,CDROMREADTOCENTRY,&TocEntry[i]);
- if (rc!=0)
- {
- printf("can't get TocEntry #%d (error %d).\n",i,rc);
- }
- else
- {
- lba2msf(TocEntry[i].cdte_addr.lba,&msf_ent[0]);
- if (TocEntry[i].cdte_track==CDROM_LEADOUT)
- {
- printf("TocEntry #%02X: %1X %1X %02d:%02d:%02d (lba: 0x%06X) %02X\n",
- TocEntry[i].cdte_track,
- TocEntry[i].cdte_adr,
- TocEntry[i].cdte_ctrl,
- msf_ent[0],
- msf_ent[1],
- msf_ent[2],
- TocEntry[i].cdte_addr.lba,
- TocEntry[i].cdte_datamode);
- }
- else
- {
- printf("TocEntry #%02d: %1X %1X %02d:%02d:%02d (lba: 0x%06X) %02X\n",
- TocEntry[i].cdte_track,
- TocEntry[i].cdte_adr,
- TocEntry[i].cdte_ctrl,
- msf_ent[0],
- msf_ent[1],
- msf_ent[2],
- TocEntry[i].cdte_addr.lba,
- TocEntry[i].cdte_datamode);
- }
- }
- }
- return (hdr.cdth_trk1); /* number of tracks */
-}
-
-void display(int size,unsigned char *buffer)
-{
- k=0;
- getchar();
- for (i=0;i<(size+1)/16;i++)
- {
- printf("%4d:",i*16);
- for (j=0;j<16;j++)
- {
- printf(" %02X",buffer[i*16+j]);
- }
- printf(" ");
- for (j=0;j<16;j++)
- {
- if (isalnum(buffer[i*16+j]))
- printf("%c",buffer[i*16+j]);
- else
- printf(".");
- }
- printf("\n");
- k++;
- if (k>=20)
- {
- printf("press ENTER to continue\n");
- getchar();
- k=0;
- }
- }
-}
-
-int main(int argc, char *argv[])
-{
- printf("\nTesting tool for a CDROM driver's audio functions V0.1\n");
- printf("(C) 1995 Eberhard Moenkeberg <emoenke@gwdg.de>\n");
- printf("initializing...\n");
-
- rc=init_drive(default_device);
- if (rc<0) printf("could not open %s (rc=%d).\n",default_device,rc);
- help();
- while (1)
- {
- printf("Give a one-letter command (h = help): ");
- scanf("%s",command);
- command[1]=0;
- switch (command[0])
- {
- case 'D':
- printf("device name (f.e. /dev/sbpcd3): ? ");
- scanf("%s",&dev);
- close(drive);
- rc=init_drive(dev);
- if (rc<0) printf("could not open %s (rc %d).\n",dev,rc);
- break;
- case 'e':
- rc=ioctl(drive,CDROMEJECT);
- if (rc<0) printf("CDROMEJECT: rc=%d.\n",rc);
- break;
- case 'p':
- rc=ioctl(drive,CDROMPAUSE);
- if (rc<0) printf("CDROMPAUSE: rc=%d.\n",rc);
- break;
- case 'r':
- rc=ioctl(drive,CDROMRESUME);
- if (rc<0) printf("CDROMRESUME: rc=%d.\n",rc);
- break;
- case 's':
- rc=ioctl(drive,CDROMSTOP);
- if (rc<0) printf("CDROMSTOP: rc=%d.\n",rc);
- break;
- case 'S':
- rc=ioctl(drive,CDROMSTART);
- if (rc<0) printf("CDROMSTART: rc=%d.\n",rc);
- break;
- case 't':
- rc=ioctl(drive,CDROMREADTOCHDR,&tocHdr);
- if (rc<0)
- {
- printf("CDROMREADTOCHDR: rc=%d.\n",rc);
- break;
- }
- first=tocHdr.cdth_trk0;
- last= tocHdr.cdth_trk1;
- if ((first==0)||(first>last))
- {
- printf ("--got invalid TOC data.\n");
- }
- else
- {
- printf("--enter track number(first=%d, last=%d): ",first,last);
- scanf("%d",&i1);
- ti.cdti_trk0=i1;
- if (ti.cdti_trk0<first) ti.cdti_trk0=first;
- if (ti.cdti_trk0>last) ti.cdti_trk0=last;
- ti.cdti_ind0=0;
- ti.cdti_trk1=last;
- ti.cdti_ind1=0;
- rc=ioctl(drive,CDROMSTOP);
- rc=ioctl(drive,CDROMPLAYTRKIND,&ti);
- if (rc<0) printf("CDROMPLAYTRKIND: rc=%d.\n",rc);
- }
- break;
- case 'n':
- rc=ioctl(drive,CDROMSTOP);
- if (++ti.cdti_trk0>last) ti.cdti_trk0=last;
- ti.cdti_ind0=0;
- ti.cdti_trk1=last;
- ti.cdti_ind1=0;
- rc=ioctl(drive,CDROMPLAYTRKIND,&ti);
- if (rc<0) printf("CDROMPLAYTRKIND: rc=%d.\n",rc);
- break;
- case 'l':
- rc=ioctl(drive,CDROMSTOP);
- if (--ti.cdti_trk0<first) ti.cdti_trk0=first;
- ti.cdti_ind0=0;
- ti.cdti_trk1=last;
- ti.cdti_ind1=0;
- rc=ioctl(drive,CDROMPLAYTRKIND,&ti);
- if (rc<0) printf("CDROMPLAYTRKIND: rc=%d.\n",rc);
- break;
- case 'c':
- subchnl.cdsc_format=CDROM_MSF;
- rc=ioctl(drive,CDROMSUBCHNL,&subchnl);
- if (rc<0) printf("CDROMSUBCHNL: rc=%d.\n",rc);
- else
- {
- printf("AudioStatus:%s Track:%d Mode:%d MSF=%02d:%02d:%02d\n",
- subchnl.cdsc_audiostatus==CDROM_AUDIO_PLAY ? "PLAYING":"NOT PLAYING",
- subchnl.cdsc_trk,subchnl.cdsc_adr,
- subchnl.cdsc_absaddr.msf.minute,
- subchnl.cdsc_absaddr.msf.second,
- subchnl.cdsc_absaddr.msf.frame);
- }
- break;
- case 'i':
- printf("Track No.: ");
- scanf("%d",&i1);
- entry.cdte_track=i1;
- if (entry.cdte_track<first) entry.cdte_track=first;
- if (entry.cdte_track>last) entry.cdte_track=last;
- entry.cdte_format=CDROM_MSF;
- rc=ioctl(drive,CDROMREADTOCENTRY,&entry);
- if (rc<0) printf("CDROMREADTOCENTRY: rc=%d.\n",rc);
- else
- {
- printf("Mode %d Track, starts at %02d:%02d:%02d\n",
- entry.cdte_adr,
- entry.cdte_addr.msf.minute,
- entry.cdte_addr.msf.second,
- entry.cdte_addr.msf.frame);
- }
- break;
- case 'a':
- printf("Address (min:sec:frm) ");
- scanf("%d:%d:%d",&i1,&i2,&i3);
- msf.cdmsf_min0=i1;
- msf.cdmsf_sec0=i2;
- msf.cdmsf_frame0=i3;
- if (msf.cdmsf_sec0>59) msf.cdmsf_sec0=59;
- if (msf.cdmsf_frame0>74) msf.cdmsf_frame0=74;
- lba2msf(TocEntry[last+1].cdte_addr.lba-1,&msf.cdmsf_min1);
- rc=ioctl(drive,CDROMSTOP);
- rc=ioctl(drive,CDROMPLAYMSF,&msf);
- if (rc<0) printf("CDROMPLAYMSF: rc=%d.\n",rc);
- break;
- case 'V':
- rc=ioctl(drive,CDROMVOLREAD,&volctrl);
- if (rc<0) printf("CDROMVOLCTRL: rc=%d.\n",rc);
- printf("Volume: channel 0 (left) %d, channel 1 (right) %d\n",volctrl.channel0,volctrl.channel1);
- break;
- case 'R':
- rc=ioctl(drive,CDROMRESET);
- if (rc<0) printf("CDROMRESET: rc=%d.\n",rc);
- break;
-#ifdef AZT_PRIVATE_IOCTLS /*not supported by every CDROM driver*/
- case 'd':
- printf("Address (min:sec:frm) ");
- scanf("%d:%d:%d",&i1,&i2,&i3);
- azt.msf.cdmsf_min0=i1;
- azt.msf.cdmsf_sec0=i2;
- azt.msf.cdmsf_frame0=i3;
- if (azt.msf.cdmsf_sec0>59) azt.msf.cdmsf_sec0=59;
- if (azt.msf.cdmsf_frame0>74) azt.msf.cdmsf_frame0=74;
- rc=ioctl(drive,CDROMREADMODE1,&azt.msf);
- if (rc<0) printf("CDROMREADMODE1: rc=%d.\n",rc);
- else display(CD_FRAMESIZE,azt.buf);
- break;
- case 'w':
- printf("Address (min:sec:frame) ");
- scanf("%d:%d:%d",&i1,&i2,&i3);
- azt.msf.cdmsf_min0=i1;
- azt.msf.cdmsf_sec0=i2;
- azt.msf.cdmsf_frame0=i3;
- if (azt.msf.cdmsf_sec0>59) azt.msf.cdmsf_sec0=59;
- if (azt.msf.cdmsf_frame0>74) azt.msf.cdmsf_frame0=74;
- rc=ioctl(drive,CDROMREADMODE2,&azt.msf);
- if (rc<0) printf("CDROMREADMODE2: rc=%d.\n",rc);
- else display(CD_FRAMESIZE_RAW,azt.buf); /* currently only 2336 */
- break;
-#endif
- case 'v':
- printf("--Channel 0 (Left) (0-255): ");
- scanf("%d",&i1);
- volctrl.channel0=i1;
- printf("--Channel 1 (Right) (0-255): ");
- scanf("%d",&i1);
- volctrl.channel1=i1;
- volctrl.channel2=0;
- volctrl.channel3=0;
- rc=ioctl(drive,CDROMVOLCTRL,&volctrl);
- if (rc<0) printf("CDROMVOLCTRL: rc=%d.\n",rc);
- break;
- case 'q':
- close(drive);
- exit(0);
- case 'h':
- help();
- break;
- case 'T': /* display TOC entry - without involving the driver */
- scanf("%d",&i);
- if ((i<hdr.cdth_trk0)||(i>hdr.cdth_trk1))
- printf("invalid track number.\n");
- else
- printf("TocEntry %02d: adr=%01X ctrl=%01X msf=%02d:%02d:%02d mode=%02X\n",
- TocEntry[i].cdte_track,
- TocEntry[i].cdte_adr,
- TocEntry[i].cdte_ctrl,
- TocEntry[i].cdte_addr.msf.minute,
- TocEntry[i].cdte_addr.msf.second,
- TocEntry[i].cdte_addr.msf.frame,
- TocEntry[i].cdte_datamode);
- break;
- case 'A': /* read audio data into file */
- printf("Address (min:sec:frm) ? ");
- scanf("%d:%d:%d",&i1,&i2,&i3);
- read_audio.addr.msf.minute=i1;
- read_audio.addr.msf.second=i2;
- read_audio.addr.msf.frame=i3;
- read_audio.addr_format=CDROM_MSF;
- printf("# of frames ? ");
- scanf("%d",&i1);
- read_audio.nframes=i1;
- k=read_audio.nframes*CD_FRAMESIZE_RAW;
- read_audio.buf=malloc(k);
- if (read_audio.buf==NULL)
- {
- printf("can't malloc %d bytes.\n",k);
- break;
- }
- sprintf(filename,"audio_%02d%02d%02d_%02d.%02d\0",
- read_audio.addr.msf.minute,
- read_audio.addr.msf.second,
- read_audio.addr.msf.frame,
- read_audio.nframes,
- ++sequence);
- datafile=creat(filename, 0755);
- if (datafile<0)
- {
- printf("can't open datafile %s.\n",filename);
- break;
- }
- rc=ioctl(drive,CDROMREADAUDIO,&read_audio);
- if (rc!=0)
- {
- printf("CDROMREADAUDIO: rc=%d.\n",rc);
- }
- else
- {
- rc=write(datafile,&read_audio.buf,k);
- if (rc!=k) printf("datafile I/O error (%d).\n",rc);
- }
- close(datafile);
- break;
- case 'X': /* set EJECT_SW (0: disable, 1: enable auto-ejecting) */
- scanf("%d",&i);
- rc=ioctl(drive,CDROMEJECT_SW,i);
- if (rc!=0)
- printf("CDROMEJECT_SW: rc=%d.\n",rc);
- else
- printf("EJECT_SW set to %d\n",i);
- break;
- case 'M': /* get the multisession redirection info */
- ms_info.addr_format=CDROM_LBA;
- rc=ioctl(drive,CDROMMULTISESSION,&ms_info);
- if (rc!=0)
- {
- printf("CDROMMULTISESSION(lba): rc=%d.\n",rc);
- }
- else
- {
- if (ms_info.xa_flag) printf("MultiSession offset (lba): %d (0x%06X)\n",ms_info.addr.lba,ms_info.addr.lba);
- else
- {
- printf("this CD is not an XA disk.\n");
- break;
- }
- }
- ms_info.addr_format=CDROM_MSF;
- rc=ioctl(drive,CDROMMULTISESSION,&ms_info);
- if (rc!=0)
- {
- printf("CDROMMULTISESSION(msf): rc=%d.\n",rc);
- }
- else
- {
- if (ms_info.xa_flag)
- printf("MultiSession offset (msf): %02d:%02d:%02d (0x%02X%02X%02X)\n",
- ms_info.addr.msf.minute,
- ms_info.addr.msf.second,
- ms_info.addr.msf.frame,
- ms_info.addr.msf.minute,
- ms_info.addr.msf.second,
- ms_info.addr.msf.frame);
- else printf("this CD is not an XA disk.\n");
- }
- break;
-#ifdef SBP_PRIVATE_IOCTLS
- case 'Y': /* set the driver's message level */
-#if 0 /* not implemented yet */
- printf("enter switch name (f.e. DBG_CMD): ");
- scanf("%s",&dbg_switch);
- j=get_dbg_num(dbg_switch);
-#else
- printf("enter DDIOCSDBG switch number: ");
- scanf("%d",&j);
-#endif
- printf("enter 0 for \"off\", 1 for \"on\": ");
- scanf("%d",&i);
- if (i==0) j|=0x80;
- printf("calling \"ioctl(drive,DDIOCSDBG,%d)\"\n",j);
- rc=ioctl(drive,DDIOCSDBG,j);
- printf("DDIOCSDBG: rc=%d.\n",rc);
- break;
- case 'Z': /* set the audio buffer size */
- printf("# frames wanted: ? ");
- scanf("%d",&j);
- rc=ioctl(drive,CDROMAUDIOBUFSIZ,j);
- printf("%d frames granted.\n",rc);
- break;
-#endif /* SBP_PRIVATE_IOCTLS */
- default:
- printf("unknown command: \"%s\".\n",command);
- break;
- }
- }
- return 0;
-}
-/*==========================================================================*/
-
diff --git a/Documentation/cdrom/sjcd b/Documentation/cdrom/sjcd
deleted file mode 100644
index 74a14847b93a..000000000000
--- a/Documentation/cdrom/sjcd
+++ /dev/null
@@ -1,60 +0,0 @@
- -- Documentation/cdrom/sjcd
- 80% of the work takes 20% of the time,
- 20% of the work takes 80% of the time...
- (Murphy's law)
-
- Once started, training can not be stopped...
- (Star Wars)
-
-This is the README for the sjcd cdrom driver, version 1.6.
-
-This file is meant as a tips & tricks edge for the usage of the SANYO CDR-H94A
-cdrom drive. It will grow as the questions arise. ;-)
-For info on configuring the ISP16 sound card look at Documentation/cdrom/isp16.
-
-The driver should work with any of the Panasonic, Sony or Mitsumi style
-CDROM interfaces.
-The cdrom interface on Media Magic's soft configurable sound card ISP16,
-which used to be included in the driver, is now supported in a separate module.
-This initialisation module will probably also work with other interfaces
-based on an OPTi 82C928 or 82C929 chip (like MAD16 and Mozart): see the
-documentation Documentation/cdrom/isp16.
-
-The device major for sjcd is 18, and minor is 0. Create a block special
-file in your /dev directory (e.g., /dev/sjcd) with these numbers.
-(For those who don't know, being root and doing the following should do
-the trick:
- mknod -m 644 /dev/sjcd b 18 0
-and mount the cdrom by /dev/sjcd).
-
-The default configuration parameters are:
- base address 0x340
- no irq
- no dma
-(Actually the CDR-H94A doesn't know how to use irq and dma.)
-As of version 1.2, setting base address at boot time is supported
-through the use of command line options: type at the "boot:" prompt:
- linux sjcd=<base_address>
-(where you would use the kernel labeled "linux" in lilo's configuration
-file /etc/lilo.conf). You could also use 'append="sjcd=<configuration_info>"'
-in the appropriate section of /etc/lilo.conf
-If you're building a kernel yourself you can set your default base
-i/o address with SJCD_BASE_ADDR in /usr/src/linux/drivers/cdrom/sjcd.h.
-
-The sjcd driver supports being loaded as a module. The following
-command will set the base i/o address on the fly (assuming you
-have installed the module in an appropriate place).
- insmod sjcd.o sjcd_base=<base_address>
-
-
-Have fun!
-
-If something is wrong, please email to vadim@rbrf.ru
- or vadim@ipsun.ras.ru
- or model@cecmow.enet.dec.com
- or H.T.M.v.d.Maarel@marin.nl
-
-It happens sometimes that Vadim is not reachable by mail. For these
-instances, Eric van der Maarel will help too.
-
- Vadim V. Model, Eric van der Maarel, Eberhard Moenkeberg
diff --git a/Documentation/cdrom/sonycd535 b/Documentation/cdrom/sonycd535
deleted file mode 100644
index b81e109970aa..000000000000
--- a/Documentation/cdrom/sonycd535
+++ /dev/null
@@ -1,122 +0,0 @@
- README FOR LINUX SONY CDU-535/531 DRIVER
- ========================================
-
-This is the Sony CDU-535 (and 531) driver version 0.7 for Linux.
-I do not think I have the documentation to add features like DMA support
-so if anyone else wants to pursue it or help me with it, please do.
-(I need to see what was done for the CDU-31A driver -- perhaps I can
-steal some of that code.)
-
-This is a Linux device driver for the Sony CDU-535 CDROM drive. This is
-one of the older Sony drives with its own interface card (Sony bus).
-The DOS driver for this drive is named SONY_CDU.SYS - when you boot DOS
-your drive should be identified as a SONY CDU-535. The driver works
-with a CDU-531 also. One user reported that the driver worked on drives
-OEM'ed by Procomm, drive and interface board were labelled Procomm.
-
-The Linux driver is based on Corey Minyard's sonycd 0.3 driver for
-the CDU-31A. Ron Jeppesen just changed the commands that were sent
-to the drive to correspond to the CDU-535 commands and registers.
-There were enough changes to let bugs creep in but it seems to be stable.
-Ron was able to tar an entire CDROM (should read all blocks) and built
-ghostview and xfig off Walnut Creek's X11R5/GNU CDROM. xcdplayer and
-workman work with the driver. Others have used the driver without
-problems except those dealing with wait loops (fixed in third release).
-Like Minyard's original driver this one uses a polled interface (this
-is also the default setup for the DOS driver). It has not been tried
-with interrupts or DMA enabled on the board.
-
-REQUIREMENTS
-============
-
- - Sony CDU-535 drive, preferably without interrupts and DMA
- enabled on the card.
-
- - Drive must be set up as unit 1. Only the first unit will be
- recognized
-
- - You must enter your interface address into
- /usr/src/linux/drivers/cdrom/sonycd535.h and build the
- appropriate kernel or use the "kernel command line" parameter
- sonycd535=0x320
- with the correct interface address.
-
-NOTES:
-======
-
-1) The drive MUST be turned on when booting or it will not be recognized!
- (but see comments on modularized version below)
-
-2) when the cdrom device is opened the eject button is disabled to keep the
- user from ejecting a mounted disk and replacing it with another.
- Unfortunately xcdplayer and workman also open the cdrom device so you
- have to use the eject button in the software. Keep this in mind if your
- cdrom player refuses to give up its disk -- exit workman or xcdplayer, or
- umount the drive if it has been mounted.
-
-THANKS
-======
-
-Many thanks to Ron Jeppesen (ronj.an@site007.saic.com) for getting
-this project off the ground. He wrote the initial release
-and the first two patches to this driver (0.1, 0.2, and 0.3).
-Thanks also to Eberhard Moenkeberg (emoenke@gwdg.de) for prodding
-me to place this code into the mainstream Linux source tree
-(as of Linux version 1.1.91), as well as some patches to make
-it a better device citizen. Further thanks to Joel Katz
-<joelkatz@webchat.org> for his MODULE patches (see details below),
-Porfiri Claudio <C.Porfiri@nisms.tei.ericsson.se> for patches
-to make the driver work with the older CDU-510/515 series, and
-Heiko Eissfeldt <heiko@colossus.escape.de> for pointing out that
-the verify_area() checks were ignoring the results of said checks
-(note: verify_area() has since been replaced by access_ok()).
-
-(Acknowledgments from Ron Jeppesen in the 0.3 release:)
-Thanks to Corey Minyard who wrote the original CDU-31A driver on which
-this driver is based. Thanks to Ken Pizzini and Bob Blair who provided
-patches and feedback on the first release of this driver.
-
-Ken Pizzini
-ken@halcyon.com
-
-------------------------------------------------------------------------------
-(The following is from Joel Katz <joelkatz@webchat.org>.)
-
- To build a version of sony535.o that can be installed as a module,
-use the following command:
-
-gcc -c -D__KERNEL__ -DMODULE -O2 sonycd535.c -o sonycd535.o
-
- To install the module, simply type:
-
-insmod sony535.o
- or
-insmod sony535.o sonycd535=<address>
-
- And to remove it:
-
-rmmod sony535
-
- The code checks to see if MODULE is defined and behaves as it used
-to if MODULE is not defined. That means your patched file should behave
-exactly as it used to if compiled into the kernel.
-
- I have an external drive, and I usually leave it powered off. I used
-to have to reboot if I needed to use the CDROM drive. Now I don't.
-
- Even if you have an internal drive, why waste the 96K of memory
-(unswappable) that the driver uses if you use your CD-ROM drive infrequently?
-
- This driver will not install (whether compiled in or loaded as a
-module) if the CDROM drive is not available during its initialization. This
-means that you can have the driver compiled into the kernel and still load
-the module later (assuming the driver doesn't install itself during
-power-on). This only wastes 12K when you boot with the CDROM drive off.
-
- This is what I usually do; I leave the driver compiled into the
-kernel, but load it as a module if I powered the system up with the drive
-off and then later decided to use the CDROM drive.
-
- Since the driver only uses a single page to point to the chunks,
-attempting to set the buffer cache to more than 2 Megabytes would be very
-bad; don't do that.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 789f97ac22bf..8363ad3ba018 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -34,7 +34,6 @@ parameter is applicable:
APIC APIC support is enabled.
APM Advanced Power Management support is enabled.
AX25 Appropriate AX.25 support is enabled.
- CD Appropriate CD support is enabled.
DRM Direct Rendering Management support is enabled.
EDD BIOS Enhanced Disk Drive Services (EDD) is enabled
EFI EFI Partitioning (GPT) is enabled
@@ -319,9 +318,6 @@ and is between 256 and 4096 characters. It is defined in the file
autotest [IA64]
- aztcd= [HW,CD] Aztech CD268 CDROM driver
- Format: <io>,0x79 (?)
-
baycom_epp= [HW,AX25]
Format: <io>,<mode>
@@ -364,10 +360,6 @@ and is between 256 and 4096 characters. It is defined in the file
possible to determine what the correct size should be.
This option provides an override for these situations.
- cdu31a= [HW,CD]
- Format: <io>,<irq>[,PAS]
- See header of drivers/cdrom/cdu31a.c.
-
chandev= [HW,NET] Generic channel device initialisation
checkreqprot [SELINUX] Set initial checkreqprot flag value.
@@ -421,9 +413,6 @@ and is between 256 and 4096 characters. It is defined in the file
hpet= [IA-32,HPET] option to disable HPET and use PIT.
Format: disable
- cm206= [HW,CD]
- Format: { auto | [<io>,][<irq>] }
-
com20020= [HW,NET] ARCnet - COM20020 chipset
Format:
<io>[,<irq>[,<nodeID>[,<backplane>[,<ckp>[,<timeout>]]]]]
@@ -660,9 +649,6 @@ and is between 256 and 4096 characters. It is defined in the file
gpt [EFI] Forces disk with valid GPT signature but
invalid Protective MBR to be treated as GPT.
- gscd= [HW,CD]
- Format: <io>
-
gvp11= [HW,SCSI]
hashdist= [KNL,NUMA] Large hashes allocated during boot
@@ -826,9 +812,6 @@ and is between 256 and 4096 characters. It is defined in the file
tasks in the system -- can cause problems and
suboptimal load balancer performance.
- isp16= [HW,CD]
- Format: <io>,<irq>,<dma>,<setup>
-
iucv= [HW,NET]
js= [HW,JOY] Analog joystick
@@ -967,11 +950,6 @@ and is between 256 and 4096 characters. It is defined in the file
mcatest= [IA-64]
- mcd= [HW,CD]
- Format: <port>,<irq>,<mitsumi_bug_93_wait>
-
- mcdx= [HW,CD]
-
mce [IA-32] Machine Check Exception
md= [HW] RAID subsystems devices and level
@@ -1204,9 +1182,6 @@ and is between 256 and 4096 characters. It is defined in the file
oprofile.timer= [HW]
Use timer interrupt instead of performance counters
- optcd= [HW,CD]
- Format: <io>
-
osst= [HW,SCSI] SCSI Tape Driver
Format: <buffer_size>,<write_threshold>
See also Documentation/scsi/st.txt.
@@ -1522,11 +1497,6 @@ and is between 256 and 4096 characters. It is defined in the file
sbni= [NET] Granch SBNI12 leased line adapter
- sbpcd= [HW,CD] Soundblaster CD adapter
- Format: <io>,<type>
- See a comment before function sbpcd_setup() in
- drivers/cdrom/sbpcd.c.
-
sc1200wdt= [HW,WDT] SC1200 WDT (watchdog) driver
Format: <io>[,<timeout>[,<isapnp>]]
@@ -1579,10 +1549,6 @@ and is between 256 and 4096 characters. It is defined in the file
simeth= [IA-64]
simscsi=
- sjcd= [HW,CD]
- Format: <io>,<irq>,<dma>
- See header of drivers/cdrom/sjcd.c.
-
slram= [HW,MTD]
slub_debug[=options[,slabs]] [MM, SLUB]
@@ -1759,9 +1725,6 @@ and is between 256 and 4096 characters. It is defined in the file
snd-ymfpci= [HW,ALSA]
- sonycd535= [HW,CD]
- Format: <io>[,<irq>]
-
sonypi.*= [HW] Sony Programmable I/O Control Device driver
See Documentation/sonypi.txt
diff --git a/Documentation/m68k/kernel-options.txt b/Documentation/m68k/kernel-options.txt
index 1c41db21d3c1..59108cebe163 100644
--- a/Documentation/m68k/kernel-options.txt
+++ b/Documentation/m68k/kernel-options.txt
@@ -82,13 +82,6 @@ Valid names are:
/dev/fd : -> 0x0200 (floppy disk)
/dev/xda: -> 0x0c00 (first XT disk, unused in Linux/m68k)
/dev/xdb: -> 0x0c40 (second XT disk, unused in Linux/m68k)
- /dev/ada: -> 0x1c00 (first ACSI device)
- /dev/adb: -> 0x1c10 (second ACSI device)
- /dev/adc: -> 0x1c20 (third ACSI device)
- /dev/add: -> 0x1c30 (forth ACSI device)
-
-The last four names are available only if the kernel has been compiled
-with Atari and ACSI support.
The name must be followed by a decimal number, that stands for the
partition number. Internally, the value of the number is just
diff --git a/Documentation/networking/net-modules.txt b/Documentation/networking/net-modules.txt
index 0b27863f155c..98c4392dd0fd 100644
--- a/Documentation/networking/net-modules.txt
+++ b/Documentation/networking/net-modules.txt
@@ -146,12 +146,6 @@ at1700.c:
irq = 0
(Probes ports: 0x260, 0x280, 0x2A0, 0x240, 0x340, 0x320, 0x380, 0x300)
-atari_bionet.c:
- Supports full autoprobing. (m68k/Atari)
-
-atari_pamsnet.c:
- Supports full autoprobing. (m68k/Atari)
-
atarilance.c:
Supports full autoprobing. (m68k/Atari)
diff --git a/MAINTAINERS b/MAINTAINERS
index da9e60a71e3a..5abec1435ad8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2613,12 +2613,6 @@ M: yokota@netlab.is.tsukuba.ac.jp
W: http://www.netlab.is.tsukuba.ac.jp/~yokota/izumi/ninja/
S: Maintained
-NON-IDE/NON-SCSI CDROM DRIVERS [GENERAL] (come on, crew - mark your responsibility)
-P: Eberhard Moenkeberg
-M: emoenke@gwdg.de
-L: linux-kernel@vger.kernel.org
-S: Maintained
-
NTFS FILESYSTEM
P: Anton Altaparmakov
M: aia21@cantab.net
@@ -3105,12 +3099,6 @@ M: michael@mihu.de
W: http://www.mihu.de/linux/saa7146
S: Maintained
-SBPCD CDROM DRIVER
-P: Eberhard Moenkeberg
-M: emoenke@gwdg.de
-L: linux-kernel@vger.kernel.org
-S: Maintained
-
SC1200 WDT DRIVER
P: Zwane Mwaikambo
M: zwane@arm.linux.org.uk
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index e49162b15578..c5a61571a076 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -59,17 +59,6 @@ config AMIGA_Z2RAM
To compile this driver as a module, choose M here: the
module will be called z2ram.
-config ATARI_SLM
- tristate "Atari SLM laser printer support"
- depends on ATARI
- help
- If you have an Atari SLM laser printer, say Y to include support for
- it in the kernel. Otherwise, say N. This driver is also available as
- a module ( = code which can be inserted in and removed from the
- running kernel whenever you want). The module will be called
- acsi_slm. Be warned: the driver needs much ST-RAM and can cause
- problems due to that fact!
-
config BLK_DEV_XD
tristate "XT hard disk support"
depends on ISA && ISA_DMA_API
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index 43371c59623e..7926be8c9fb7 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -9,7 +9,6 @@ obj-$(CONFIG_MAC_FLOPPY) += swim3.o
obj-$(CONFIG_BLK_DEV_FD) += floppy.o
obj-$(CONFIG_AMIGA_FLOPPY) += amiflop.o
obj-$(CONFIG_ATARI_FLOPPY) += ataflop.o
-obj-$(CONFIG_ATARI_SLM) += acsi_slm.o
obj-$(CONFIG_AMIGA_Z2RAM) += z2ram.o
obj-$(CONFIG_BLK_DEV_RAM) += rd.o
obj-$(CONFIG_BLK_DEV_LOOP) += loop.o
diff --git a/drivers/block/acsi_slm.c b/drivers/block/acsi_slm.c
deleted file mode 100644
index 1d9d9b4f48cc..000000000000
--- a/drivers/block/acsi_slm.c
+++ /dev/null
@@ -1,1032 +0,0 @@
-/*
- * acsi_slm.c -- Device driver for the Atari SLM laser printer
- *
- * Copyright 1995 Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- *
- */
-
-/*
-
-Notes:
-
-The major number for SLM printers is 28 (like ACSI), but as a character
-device, not block device. The minor number is the number of the printer (if
-you have more than one SLM; currently max. 2 (#define-constant) SLMs are
-supported). The device can be opened for reading and writing. If reading it,
-you get some status infos (MODE SENSE data). Writing mode is used for the data
-to be printed. Some ioctls allow to get the printer status and to tune printer
-modes and some internal variables.
-
-A special problem of the SLM driver is the timing and thus the buffering of
-the print data. The problem is that all the data for one page must be present
-in memory when printing starts, else --when swapping occurs-- the timing could
-not be guaranteed. There are several ways to assure this:
-
- 1) Reserve a buffer of 1196k (maximum page size) statically by
- atari_stram_alloc(). The data are collected there until they're complete,
- and then printing starts. Since the buffer is reserved, no further
- considerations about memory and swapping are needed. So this is the
- simplest method, but it needs a lot of memory for just the SLM.
-
- An striking advantage of this method is (supposed the SLM_CONT_CNT_REPROG
- method works, see there), that there are no timing problems with the DMA
- anymore.
-
- 2) The other method would be to reserve the buffer dynamically each time
- printing is required. I could think of looking at mem_map where the
- largest unallocted ST-RAM area is, taking the area, and then extending it
- by swapping out the neighbored pages, until the needed size is reached.
- This requires some mm hacking, but seems possible. The only obstacle could
- be pages that cannot be swapped out (reserved pages)...
-
- 3) Another possibility would be to leave the real data in user space and to
- work with two dribble buffers of about 32k in the driver: While the one
- buffer is DMAed to the SLM, the other can be filled with new data. But
- to keep the timing, that requires that the user data remain in memory and
- are not swapped out. Requires mm hacking, too, but maybe not so bad as
- method 2).
-
-*/
-
-#include <linux/module.h>
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/major.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/uaccess.h>
-#include <asm/atarihw.h>
-#include <asm/atariints.h>
-#include <asm/atari_acsi.h>
-#include <asm/atari_stdma.h>
-#include <asm/atari_stram.h>
-#include <asm/atari_SLM.h>
-
-
-#undef DEBUG
-
-/* Define this if the page data are continuous in physical memory. That
- * requires less reprogramming of the ST-DMA */
-#define SLM_CONTINUOUS_DMA
-
-/* Use continuous reprogramming of the ST-DMA counter register. This is
- * --strictly speaking-- not allowed, Atari recommends not to look at the
- * counter register while a DMA is going on. But I don't know if that applies
- * only for reading the register, or also writing to it. Writing only works
- * fine for me... The advantage is that the timing becomes absolutely
- * uncritical: Just update each, say 200ms, the counter reg to its maximum,
- * and the DMA will work until the status byte interrupt occurs.
- */
-#define SLM_CONT_CNT_REPROG
-
-#define CMDSET_TARG_LUN(cmd,targ,lun) \
- do { \
- cmd[0] = (cmd[0] & ~0xe0) | (targ)<<5; \
- cmd[1] = (cmd[1] & ~0xe0) | (lun)<<5; \
- } while(0)
-
-#define START_TIMER(to) mod_timer(&slm_timer, jiffies + (to))
-#define STOP_TIMER() del_timer(&slm_timer)
-
-
-static char slmreqsense_cmd[6] = { 0x03, 0, 0, 0, 0, 0 };
-static char slmprint_cmd[6] = { 0x0a, 0, 0, 0, 0, 0 };
-static char slminquiry_cmd[6] = { 0x12, 0, 0, 0, 0, 0x80 };
-static char slmmsense_cmd[6] = { 0x1a, 0, 0, 0, 255, 0 };
-#if 0
-static char slmmselect_cmd[6] = { 0x15, 0, 0, 0, 0, 0 };
-#endif
-
-
-#define MAX_SLM 2
-
-static struct slm {
- unsigned target; /* target number */
- unsigned lun; /* LUN in target controller */
- atomic_t wr_ok; /* set to 0 if output part busy */
- atomic_t rd_ok; /* set to 0 if status part busy */
-} slm_info[MAX_SLM];
-
-int N_SLM_Printers = 0;
-
-/* printer buffer */
-static unsigned char *SLMBuffer; /* start of buffer */
-static unsigned char *BufferP; /* current position in buffer */
-static int BufferSize; /* length of buffer for page size */
-
-typedef enum { IDLE, FILLING, PRINTING } SLMSTATE;
-static SLMSTATE SLMState;
-static int SLMBufOwner; /* SLM# currently using the buffer */
-
-/* DMA variables */
-#ifndef SLM_CONT_CNT_REPROG
-static unsigned long SLMCurAddr; /* current base addr of DMA chunk */
-static unsigned long SLMEndAddr; /* expected end addr */
-static unsigned long SLMSliceSize; /* size of one DMA chunk */
-#endif
-static int SLMError;
-
-/* wait queues */
-static DECLARE_WAIT_QUEUE_HEAD(slm_wait); /* waiting for buffer */
-static DECLARE_WAIT_QUEUE_HEAD(print_wait); /* waiting for printing finished */
-
-/* status codes */
-#define SLMSTAT_OK 0x00
-#define SLMSTAT_ORNERY 0x02
-#define SLMSTAT_TONER 0x03
-#define SLMSTAT_WARMUP 0x04
-#define SLMSTAT_PAPER 0x05
-#define SLMSTAT_DRUM 0x06
-#define SLMSTAT_INJAM 0x07
-#define SLMSTAT_THRJAM 0x08
-#define SLMSTAT_OUTJAM 0x09
-#define SLMSTAT_COVER 0x0a
-#define SLMSTAT_FUSER 0x0b
-#define SLMSTAT_IMAGER 0x0c
-#define SLMSTAT_MOTOR 0x0d
-#define SLMSTAT_VIDEO 0x0e
-#define SLMSTAT_SYSTO 0x10
-#define SLMSTAT_OPCODE 0x12
-#define SLMSTAT_DEVNUM 0x15
-#define SLMSTAT_PARAM 0x1a
-#define SLMSTAT_ACSITO 0x1b /* driver defined */
-#define SLMSTAT_NOTALL 0x1c /* driver defined */
-
-static char *SLMErrors[] = {
- /* 0x00 */ "OK and ready",
- /* 0x01 */ NULL,
- /* 0x02 */ "ornery printer",
- /* 0x03 */ "toner empty",
- /* 0x04 */ "warming up",
- /* 0x05 */ "paper empty",
- /* 0x06 */ "drum empty",
- /* 0x07 */ "input jam",
- /* 0x08 */ "through jam",
- /* 0x09 */ "output jam",
- /* 0x0a */ "cover open",
- /* 0x0b */ "fuser malfunction",
- /* 0x0c */ "imager malfunction",
- /* 0x0d */ "motor malfunction",
- /* 0x0e */ "video malfunction",
- /* 0x0f */ NULL,
- /* 0x10 */ "printer system timeout",
- /* 0x11 */ NULL,
- /* 0x12 */ "invalid operation code",
- /* 0x13 */ NULL,
- /* 0x14 */ NULL,
- /* 0x15 */ "invalid device number",
- /* 0x16 */ NULL,
- /* 0x17 */ NULL,
- /* 0x18 */ NULL,
- /* 0x19 */ NULL,
- /* 0x1a */ "invalid parameter list",
- /* 0x1b */ "ACSI timeout",
- /* 0x1c */ "not all printed"
-};
-
-#define N_ERRORS (sizeof(SLMErrors)/sizeof(*SLMErrors))
-
-/* real (driver caused) error? */
-#define IS_REAL_ERROR(x) (x > 0x10)
-
-
-static struct {
- char *name;
- int w, h;
-} StdPageSize[] = {
- { "Letter", 2400, 3180 },
- { "Legal", 2400, 4080 },
- { "A4", 2336, 3386 },
- { "B5", 2016, 2914 }
-};
-
-#define N_STD_SIZES (sizeof(StdPageSize)/sizeof(*StdPageSize))
-
-#define SLM_BUFFER_SIZE (2336*3386/8) /* A4 for now */
-#define SLM_DMA_AMOUNT 255 /* #sectors to program the DMA for */
-
-#ifdef SLM_CONTINUOUS_DMA
-# define SLM_DMA_INT_OFFSET 0 /* DMA goes until seccnt 0, no offs */
-# define SLM_DMA_END_OFFSET 32 /* 32 Byte ST-DMA FIFO */
-# define SLM_SLICE_SIZE(w) (255*512)
-#else
-# define SLM_DMA_INT_OFFSET 32 /* 32 Byte ST-DMA FIFO */
-# define SLM_DMA_END_OFFSET 32 /* 32 Byte ST-DMA FIFO */
-# define SLM_SLICE_SIZE(w) ((254*512)/(w/8)*(w/8))
-#endif
-
-/* calculate the number of jiffies to wait for 'n' bytes */
-#ifdef SLM_CONT_CNT_REPROG
-#define DMA_TIME_FOR(n) 50
-#define DMA_STARTUP_TIME 0
-#else
-#define DMA_TIME_FOR(n) (n/1400-1)
-#define DMA_STARTUP_TIME 650
-#endif
-
-/***************************** Prototypes *****************************/
-
-static char *slm_errstr( int stat );
-static int slm_getstats( char *buffer, int device );
-static ssize_t slm_read( struct file* file, char *buf, size_t count, loff_t
- *ppos );
-static void start_print( int device );
-static irqreturn_t slm_interrupt(int irc, void *data);
-static void slm_test_ready( unsigned long dummy );
-static void set_dma_addr( unsigned long paddr );
-static unsigned long get_dma_addr( void );
-static ssize_t slm_write( struct file *file, const char *buf, size_t count,
- loff_t *ppos );
-static int slm_ioctl( struct inode *inode, struct file *file, unsigned int
- cmd, unsigned long arg );
-static int slm_open( struct inode *inode, struct file *file );
-static int slm_release( struct inode *inode, struct file *file );
-static int slm_req_sense( int device );
-static int slm_mode_sense( int device, char *buffer, int abs_flag );
-#if 0
-static int slm_mode_select( int device, char *buffer, int len, int
- default_flag );
-#endif
-static int slm_get_pagesize( int device, int *w, int *h );
-
-/************************* End of Prototypes **************************/
-
-
-static DEFINE_TIMER(slm_timer, slm_test_ready, 0, 0);
-
-static const struct file_operations slm_fops = {
- .owner = THIS_MODULE,
- .read = slm_read,
- .write = slm_write,
- .ioctl = slm_ioctl,
- .open = slm_open,
- .release = slm_release,
-};
-
-
-/* ---------------------------------------------------------------------- */
-/* Status Functions */
-
-
-static char *slm_errstr( int stat )
-
-{ char *p;
- static char str[22];
-
- stat &= 0x1f;
- if (stat >= 0 && stat < N_ERRORS && (p = SLMErrors[stat]))
- return( p );
- sprintf( str, "unknown status 0x%02x", stat );
- return( str );
-}
-
-
-static int slm_getstats( char *buffer, int device )
-
-{ int len = 0, stat, i, w, h;
- unsigned char buf[256];
-
- stat = slm_mode_sense( device, buf, 0 );
- if (IS_REAL_ERROR(stat))
- return( -EIO );
-
-#define SHORTDATA(i) ((buf[i] << 8) | buf[i+1])
-#define BOOLDATA(i,mask) ((buf[i] & mask) ? "on" : "off")
-
- w = SHORTDATA( 3 );
- h = SHORTDATA( 1 );
-
- len += sprintf( buffer+len, "Status\t\t%s\n",
- slm_errstr( stat ) );
- len += sprintf( buffer+len, "Page Size\t%dx%d",
- w, h );
-
- for( i = 0; i < N_STD_SIZES; ++i ) {
- if (w == StdPageSize[i].w && h == StdPageSize[i].h)
- break;
- }
- if (i < N_STD_SIZES)
- len += sprintf( buffer+len, " (%s)", StdPageSize[i].name );
- buffer[len++] = '\n';
-
- len += sprintf( buffer+len, "Top/Left Margin\t%d/%d\n",
- SHORTDATA( 5 ), SHORTDATA( 7 ) );
- len += sprintf( buffer+len, "Manual Feed\t%s\n",
- BOOLDATA( 9, 0x01 ) );
- len += sprintf( buffer+len, "Input Select\t%d\n",
- (buf[9] >> 1) & 7 );
- len += sprintf( buffer+len, "Auto Select\t%s\n",
- BOOLDATA( 9, 0x10 ) );
- len += sprintf( buffer+len, "Prefeed Paper\t%s\n",
- BOOLDATA( 9, 0x20 ) );
- len += sprintf( buffer+len, "Thick Pixels\t%s\n",
- BOOLDATA( 9, 0x40 ) );
- len += sprintf( buffer+len, "H/V Resol.\t%d/%d dpi\n",
- SHORTDATA( 12 ), SHORTDATA( 10 ) );
- len += sprintf( buffer+len, "System Timeout\t%d\n",
- buf[14] );
- len += sprintf( buffer+len, "Scan Time\t%d\n",
- SHORTDATA( 15 ) );
- len += sprintf( buffer+len, "Page Count\t%d\n",
- SHORTDATA( 17 ) );
- len += sprintf( buffer+len, "In/Out Cap.\t%d/%d\n",
- SHORTDATA( 19 ), SHORTDATA( 21 ) );
- len += sprintf( buffer+len, "Stagger Output\t%s\n",
- BOOLDATA( 23, 0x01 ) );
- len += sprintf( buffer+len, "Output Select\t%d\n",
- (buf[23] >> 1) & 7 );
- len += sprintf( buffer+len, "Duplex Print\t%s\n",
- BOOLDATA( 23, 0x10 ) );
- len += sprintf( buffer+len, "Color Sep.\t%s\n",
- BOOLDATA( 23, 0x20 ) );
-
- return( len );
-}
-
-
-static ssize_t slm_read( struct file *file, char *buf, size_t count,
- loff_t *ppos )
-
-{
- struct inode *node = file->f_path.dentry->d_inode;
- unsigned long page;
- int length;
- int end;
-
- if (!(page = __get_free_page( GFP_KERNEL )))
- return( -ENOMEM );
-
- length = slm_getstats( (char *)page, iminor(node) );
- if (length < 0) {
- count = length;
- goto out;
- }
- if (file->f_pos >= length) {
- count = 0;
- goto out;
- }
- if (count + file->f_pos > length)
- count = length - file->f_pos;
- end = count + file->f_pos;
- if (copy_to_user(buf, (char *)page + file->f_pos, count)) {
- count = -EFAULT;
- goto out;
- }
- file->f_pos = end;
-out: free_page( page );
- return( count );
-}
-
-
-/* ---------------------------------------------------------------------- */
-/* Printing */
-
-
-static void start_print( int device )
-
-{ struct slm *sip = &slm_info[device];
- unsigned char *cmd;
- unsigned long paddr;
- int i;
-
- stdma_lock( slm_interrupt, NULL );
-
- CMDSET_TARG_LUN( slmprint_cmd, sip->target, sip->lun );
- cmd = slmprint_cmd;
- paddr = virt_to_phys( SLMBuffer );
- dma_cache_maintenance( paddr, virt_to_phys(BufferP)-paddr, 1 );
- DISABLE_IRQ();
-
- /* Low on A1 */
- dma_wd.dma_mode_status = 0x88;
- MFPDELAY();
-
- /* send the command bytes except the last */
- for( i = 0; i < 5; ++i ) {
- DMA_LONG_WRITE( *cmd++, 0x8a );
- udelay(20);
- if (!acsi_wait_for_IRQ( HZ/2 )) {
- SLMError = 1;
- return; /* timeout */
- }
- }
- /* last command byte */
- DMA_LONG_WRITE( *cmd++, 0x82 );
- MFPDELAY();
- /* set DMA address */
- set_dma_addr( paddr );
- /* program DMA for write and select sector counter reg */
- dma_wd.dma_mode_status = 0x192;
- MFPDELAY();
- /* program for 255*512 bytes and start DMA */
- DMA_LONG_WRITE( SLM_DMA_AMOUNT, 0x112 );
-
-#ifndef SLM_CONT_CNT_REPROG
- SLMCurAddr = paddr;
- SLMEndAddr = paddr + SLMSliceSize + SLM_DMA_INT_OFFSET;
-#endif
- START_TIMER( DMA_STARTUP_TIME + DMA_TIME_FOR( SLMSliceSize ));
-#if !defined(SLM_CONT_CNT_REPROG) && defined(DEBUG)
- printk( "SLM: CurAddr=%#lx EndAddr=%#lx timer=%ld\n",
- SLMCurAddr, SLMEndAddr, DMA_TIME_FOR( SLMSliceSize ) );
-#endif
-
- ENABLE_IRQ();
-}
-
-
-/* Only called when an error happened or at the end of a page */
-
-static irqreturn_t slm_interrupt(int irc, void *data)
-
-{ unsigned long addr;
- int stat;
-
- STOP_TIMER();
- addr = get_dma_addr();
- stat = acsi_getstatus();
- SLMError = (stat < 0) ? SLMSTAT_ACSITO :
- (addr < virt_to_phys(BufferP)) ? SLMSTAT_NOTALL :
- stat;
-
- dma_wd.dma_mode_status = 0x80;
- MFPDELAY();
-#ifdef DEBUG
- printk( "SLM: interrupt, addr=%#lx, error=%d\n", addr, SLMError );
-#endif
-
- wake_up( &print_wait );
- stdma_release();
- ENABLE_IRQ();
- return IRQ_HANDLED;
-}
-
-
-static void slm_test_ready( unsigned long dummy )
-
-{
-#ifdef SLM_CONT_CNT_REPROG
- /* program for 255*512 bytes again */
- dma_wd.fdc_acces_seccount = SLM_DMA_AMOUNT;
- START_TIMER( DMA_TIME_FOR(0) );
-#ifdef DEBUG
- printk( "SLM: reprogramming timer for %d jiffies, addr=%#lx\n",
- DMA_TIME_FOR(0), get_dma_addr() );
-#endif
-
-#else /* !SLM_CONT_CNT_REPROG */
-
- unsigned long flags, addr;
- int d, ti;
-#ifdef DEBUG
- struct timeval start_tm, end_tm;
- int did_wait = 0;
-#endif
-
- local_irq_save(flags);
-
- addr = get_dma_addr();
- if ((d = SLMEndAddr - addr) > 0) {
- local_irq_restore(flags);
-
- /* slice not yet finished, decide whether to start another timer or to
- * busy-wait */
- ti = DMA_TIME_FOR( d );
- if (ti > 0) {
-#ifdef DEBUG
- printk( "SLM: reprogramming timer for %d jiffies, rest %d bytes\n",
- ti, d );
-#endif
- START_TIMER( ti );
- return;
- }
- /* wait for desired end address to be reached */
-#ifdef DEBUG
- do_gettimeofday( &start_tm );
- did_wait = 1;
-#endif
- local_irq_disable();
- while( get_dma_addr() < SLMEndAddr )
- barrier();
- }
-
- /* slice finished, start next one */
- SLMCurAddr += SLMSliceSize;
-
-#ifdef SLM_CONTINUOUS_DMA
- /* program for 255*512 bytes again */
- dma_wd.fdc_acces_seccount = SLM_DMA_AMOUNT;
-#else
- /* set DMA address;
- * add 2 bytes for the ones in the SLM controller FIFO! */
- set_dma_addr( SLMCurAddr + 2 );
- /* toggle DMA to write and select sector counter reg */
- dma_wd.dma_mode_status = 0x92;
- MFPDELAY();
- dma_wd.dma_mode_status = 0x192;
- MFPDELAY();
- /* program for 255*512 bytes and start DMA */
- DMA_LONG_WRITE( SLM_DMA_AMOUNT, 0x112 );
-#endif
-
- local_irq_restore(flags);
-
-#ifdef DEBUG
- if (did_wait) {
- int ms;
- do_gettimeofday( &end_tm );
- ms = (end_tm.tv_sec*1000000+end_tm.tv_usec) -
- (start_tm.tv_sec*1000000+start_tm.tv_usec);
- printk( "SLM: did %ld.%ld ms busy waiting for %d bytes\n",
- ms/1000, ms%1000, d );
- }
- else
- printk( "SLM: didn't wait (!)\n" );
-#endif
-
- if ((unsigned char *)PTOV( SLMCurAddr + SLMSliceSize ) >= BufferP) {
- /* will be last slice, no timer necessary */
-#ifdef DEBUG
- printk( "SLM: CurAddr=%#lx EndAddr=%#lx last slice -> no timer\n",
- SLMCurAddr, SLMEndAddr );
-#endif
- }
- else {
- /* not last slice */
- SLMEndAddr = SLMCurAddr + SLMSliceSize + SLM_DMA_INT_OFFSET;
- START_TIMER( DMA_TIME_FOR( SLMSliceSize ));
-#ifdef DEBUG
- printk( "SLM: CurAddr=%#lx EndAddr=%#lx timer=%ld\n",
- SLMCurAddr, SLMEndAddr, DMA_TIME_FOR( SLMSliceSize ) );
-#endif
- }
-#endif /* SLM_CONT_CNT_REPROG */
-}
-
-
-static void set_dma_addr( unsigned long paddr )
-
-{ unsigned long flags;
-
- local_irq_save(flags);
- dma_wd.dma_lo = (unsigned char)paddr;
- paddr >>= 8;
- MFPDELAY();
- dma_wd.dma_md = (unsigned char)paddr;
- paddr >>= 8;
- MFPDELAY();
- if (ATARIHW_PRESENT( EXTD_DMA ))
- st_dma_ext_dmahi = (unsigned short)paddr;
- else
- dma_wd.dma_hi = (unsigned char)paddr;
- MFPDELAY();
- local_irq_restore(flags);
-}
-
-
-static unsigned long get_dma_addr( void )
-
-{ unsigned long addr;
-
- addr = dma_wd.dma_lo & 0xff;
- MFPDELAY();
- addr |= (dma_wd.dma_md & 0xff) << 8;
- MFPDELAY();
- addr |= (dma_wd.dma_hi & 0xff) << 16;
- MFPDELAY();
-
- return( addr );
-}
-
-
-static ssize_t slm_write( struct file *file, const char *buf, size_t count,
- loff_t *ppos )
-
-{
- struct inode *node = file->f_path.dentry->d_inode;
- int device = iminor(node);
- int n, filled, w, h;
-
- while( SLMState == PRINTING ||
- (SLMState == FILLING && SLMBufOwner != device) ) {
- interruptible_sleep_on( &slm_wait );
- if (signal_pending(current))
- return( -ERESTARTSYS );
- }
- if (SLMState == IDLE) {
- /* first data of page: get current page size */
- if (slm_get_pagesize( device, &w, &h ))
- return( -EIO );
- BufferSize = w*h/8;
- if (BufferSize > SLM_BUFFER_SIZE)
- return( -ENOMEM );
-
- SLMState = FILLING;
- SLMBufOwner = device;
- }
-
- n = count;
- filled = BufferP - SLMBuffer;
- if (filled + n > BufferSize)
- n = BufferSize - filled;
-
- if (copy_from_user(BufferP, buf, n))
- return -EFAULT;
- BufferP += n;
- filled += n;
-
- if (filled == BufferSize) {
- /* Check the paper size again! The user may have switched it in the
- * time between starting the data and finishing them. Would end up in
- * a trashy page... */
- if (slm_get_pagesize( device, &w, &h ))
- return( -EIO );
- if (BufferSize != w*h/8) {
- printk( KERN_NOTICE "slm%d: page size changed while printing\n",
- device );
- return( -EAGAIN );
- }
-
- SLMState = PRINTING;
- /* choose a slice size that is a multiple of the line size */
-#ifndef SLM_CONT_CNT_REPROG
- SLMSliceSize = SLM_SLICE_SIZE(w);
-#endif
-
- start_print( device );
- sleep_on( &print_wait );
- if (SLMError && IS_REAL_ERROR(SLMError)) {
- printk( KERN_ERR "slm%d: %s\n", device, slm_errstr(SLMError) );
- n = -EIO;
- }
-
- SLMState = IDLE;
- BufferP = SLMBuffer;
- wake_up_interruptible( &slm_wait );
- }
-
- return( n );
-}
-
-
-/* ---------------------------------------------------------------------- */
-/* ioctl Functions */
-
-
-static int slm_ioctl( struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg )
-
-{ int device = iminor(inode), err;
-
- /* I can think of setting:
- * - manual feed
- * - paper format
- * - copy count
- * - ...
- * but haven't implemented that yet :-)
- * BTW, has anybody better docs about the MODE SENSE/MODE SELECT data?
- */
- switch( cmd ) {
-
- case SLMIORESET: /* reset buffer, i.e. empty the buffer */
- if (!(file->f_mode & 2))
- return( -EINVAL );
- if (SLMState == PRINTING)
- return( -EBUSY );
- SLMState = IDLE;
- BufferP = SLMBuffer;
- wake_up_interruptible( &slm_wait );
- return( 0 );
-
- case SLMIOGSTAT: { /* get status */
- int stat;
- char *str;
-
- stat = slm_req_sense( device );
- if (arg) {
- str = slm_errstr( stat );
- if (put_user(stat,
- (long *)&((struct SLM_status *)arg)->stat))
- return -EFAULT;
- if (copy_to_user( ((struct SLM_status *)arg)->str, str,
- strlen(str) + 1))
- return -EFAULT;
- }
- return( stat );
- }
-
- case SLMIOGPSIZE: { /* get paper size */
- int w, h;
-
- if ((err = slm_get_pagesize( device, &w, &h ))) return( err );
-
- if (put_user(w, (long *)&((struct SLM_paper_size *)arg)->width))
- return -EFAULT;
- if (put_user(h, (long *)&((struct SLM_paper_size *)arg)->height))
- return -EFAULT;
- return( 0 );
- }
-
- case SLMIOGMFEED: /* get manual feed */
- return( -EINVAL );
-
- case SLMIOSPSIZE: /* set paper size */
- return( -EINVAL );
-
- case SLMIOSMFEED: /* set manual feed */
- return( -EINVAL );
-
- }
- return( -EINVAL );
-}
-
-
-/* ---------------------------------------------------------------------- */
-/* Opening and Closing */
-
-
-static int slm_open( struct inode *inode, struct file *file )
-
-{ int device;
- struct slm *sip;
-
- device = iminor(inode);
- if (device >= N_SLM_Printers)
- return( -ENXIO );
- sip = &slm_info[device];
-
- if (file->f_mode & 2) {
- /* open for writing is exclusive */
- if ( !atomic_dec_and_test(&sip->wr_ok) ) {
- atomic_inc(&sip->wr_ok);
- return( -EBUSY );
- }
- }
- if (file->f_mode & 1) {
- /* open for reading is exclusive */
- if ( !atomic_dec_and_test(&sip->rd_ok) ) {
- atomic_inc(&sip->rd_ok);
- return( -EBUSY );
- }
- }
-
- return( 0 );
-}
-
-
-static int slm_release( struct inode *inode, struct file *file )
-
-{ int device;
- struct slm *sip;
-
- device = iminor(inode);
- sip = &slm_info[device];
-
- if (file->f_mode & 2)
- atomic_inc( &sip->wr_ok );
- if (file->f_mode & 1)
- atomic_inc( &sip->rd_ok );
-
- return( 0 );
-}
-
-
-/* ---------------------------------------------------------------------- */
-/* ACSI Primitives for the SLM */
-
-
-static int slm_req_sense( int device )
-
-{ int stat, rv;
- struct slm *sip = &slm_info[device];
-
- stdma_lock( NULL, NULL );
-
- CMDSET_TARG_LUN( slmreqsense_cmd, sip->target, sip->lun );
- if (!acsicmd_nodma( slmreqsense_cmd, 0 ) ||
- (stat = acsi_getstatus()) < 0)
- rv = SLMSTAT_ACSITO;
- else
- rv = stat & 0x1f;
-
- ENABLE_IRQ();
- stdma_release();
- return( rv );
-}
-
-
-static int slm_mode_sense( int device, char *buffer, int abs_flag )
-
-{ unsigned char stat, len;
- int rv = 0;
- struct slm *sip = &slm_info[device];
-
- stdma_lock( NULL, NULL );
-
- CMDSET_TARG_LUN( slmmsense_cmd, sip->target, sip->lun );
- slmmsense_cmd[5] = abs_flag ? 0x80 : 0;
- if (!acsicmd_nodma( slmmsense_cmd, 0 )) {
- rv = SLMSTAT_ACSITO;
- goto the_end;
- }
-
- if (!acsi_extstatus( &stat, 1 )) {
- acsi_end_extstatus();
- rv = SLMSTAT_ACSITO;
- goto the_end;
- }
-
- if (!acsi_extstatus( &len, 1 )) {
- acsi_end_extstatus();
- rv = SLMSTAT_ACSITO;
- goto the_end;
- }
- buffer[0] = len;
- if (!acsi_extstatus( buffer+1, len )) {
- acsi_end_extstatus();
- rv = SLMSTAT_ACSITO;
- goto the_end;
- }
-
- acsi_end_extstatus();
- rv = stat & 0x1f;
-
- the_end:
- ENABLE_IRQ();
- stdma_release();
- return( rv );
-}
-
-
-#if 0
-/* currently unused */
-static int slm_mode_select( int device, char *buffer, int len,
- int default_flag )
-
-{ int stat, rv;
- struct slm *sip = &slm_info[device];
-
- stdma_lock( NULL, NULL );
-
- CMDSET_TARG_LUN( slmmselect_cmd, sip->target, sip->lun );
- slmmselect_cmd[5] = default_flag ? 0x80 : 0;
- if (!acsicmd_nodma( slmmselect_cmd, 0 )) {
- rv = SLMSTAT_ACSITO;
- goto the_end;
- }
-
- if (!default_flag) {
- unsigned char c = len;
- if (!acsi_extcmd( &c, 1 )) {
- rv = SLMSTAT_ACSITO;
- goto the_end;
- }
- if (!acsi_extcmd( buffer, len )) {
- rv = SLMSTAT_ACSITO;
- goto the_end;
- }
- }
-
- stat = acsi_getstatus();
- rv = (stat < 0 ? SLMSTAT_ACSITO : stat);
-
- the_end:
- ENABLE_IRQ();
- stdma_release();
- return( rv );
-}
-#endif
-
-
-static int slm_get_pagesize( int device, int *w, int *h )
-
-{ char buf[256];
- int stat;
-
- stat = slm_mode_sense( device, buf, 0 );
- ENABLE_IRQ();
- stdma_release();
-
- if (stat != SLMSTAT_OK)
- return( -EIO );
-
- *w = (buf[3] << 8) | buf[4];
- *h = (buf[1] << 8) | buf[2];
- return( 0 );
-}
-
-
-/* ---------------------------------------------------------------------- */
-/* Initialization */
-
-
-int attach_slm( int target, int lun )
-
-{ static int did_register;
- int len;
-
- if (N_SLM_Printers >= MAX_SLM) {
- printk( KERN_WARNING "Too much SLMs\n" );
- return( 0 );
- }
-
- /* do an INQUIRY */
- udelay(100);
- CMDSET_TARG_LUN( slminquiry_cmd, target, lun );
- if (!acsicmd_nodma( slminquiry_cmd, 0 )) {
- inq_timeout:
- printk( KERN_ERR "SLM inquiry command timed out.\n" );
- inq_fail:
- acsi_end_extstatus();
- return( 0 );
- }
- /* read status and header of return data */
- if (!acsi_extstatus( SLMBuffer, 6 ))
- goto inq_timeout;
-
- if (SLMBuffer[1] != 2) { /* device type == printer? */
- printk( KERN_ERR "SLM inquiry returned device type != printer\n" );
- goto inq_fail;
- }
- len = SLMBuffer[5];
-
- /* read id string */
- if (!acsi_extstatus( SLMBuffer, len ))
- goto inq_timeout;
- acsi_end_extstatus();
- SLMBuffer[len] = 0;
-
- if (!did_register) {
- did_register = 1;
- }
-
- slm_info[N_SLM_Printers].target = target;
- slm_info[N_SLM_Printers].lun = lun;
- atomic_set(&slm_info[N_SLM_Printers].wr_ok, 1 );
- atomic_set(&slm_info[N_SLM_Printers].rd_ok, 1 );
-
- printk( KERN_INFO " Printer: %s\n", SLMBuffer );
- printk( KERN_INFO "Detected slm%d at id %d lun %d\n",
- N_SLM_Printers, target, lun );
- N_SLM_Printers++;
- return( 1 );
-}
-
-int slm_init( void )
-
-{
- int i;
- if (register_chrdev( ACSI_MAJOR, "slm", &slm_fops )) {
- printk( KERN_ERR "Unable to get major %d for ACSI SLM\n", ACSI_MAJOR );
- return -EBUSY;
- }
-
- if (!(SLMBuffer = atari_stram_alloc( SLM_BUFFER_SIZE, "SLM" ))) {
- printk( KERN_ERR "Unable to get SLM ST-Ram buffer.\n" );
- unregister_chrdev( ACSI_MAJOR, "slm" );
- return -ENOMEM;
- }
- BufferP = SLMBuffer;
- SLMState = IDLE;
-
- return 0;
-}
-
-#ifdef MODULE
-
-/* from acsi.c */
-void acsi_attach_SLMs( int (*attach_func)( int, int ) );
-
-int init_module(void)
-{
- int err;
-
- if ((err = slm_init()))
- return( err );
- /* This calls attach_slm() for every target/lun where acsi.c detected a
- * printer */
- acsi_attach_SLMs( attach_slm );
- return( 0 );
-}
-
-void cleanup_module(void)
-{
- if (unregister_chrdev( ACSI_MAJOR, "slm" ) != 0)
- printk( KERN_ERR "acsi_slm: cleanup_module failed\n");
- atari_stram_free( SLMBuffer );
-}
-#endif
diff --git a/drivers/block/umem.c b/drivers/block/umem.c
index 6f5d6203d725..dec74bd23496 100644
--- a/drivers/block/umem.c
+++ b/drivers/block/umem.c
@@ -105,12 +105,6 @@ struct cardinfo {
unsigned long csr_base;
unsigned char __iomem *csr_remap;
unsigned long csr_len;
-#ifdef CONFIG_MM_MAP_MEMORY
- unsigned long mem_base;
- unsigned char __iomem *mem_remap;
- unsigned long mem_len;
-#endif
-
unsigned int win_size; /* PCI window size */
unsigned int mm_size; /* size in kbytes */
@@ -872,10 +866,6 @@ static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_i
card->csr_base = pci_resource_start(dev, 0);
card->csr_len = pci_resource_len(dev, 0);
-#ifdef CONFIG_MM_MAP_MEMORY
- card->mem_base = pci_resource_start(dev, 1);
- card->mem_len = pci_resource_len(dev, 1);
-#endif
printk(KERN_INFO "Micro Memory(tm) controller #%d found at %02x:%02x (PCI Mem Module (Battery Backup))\n",
card->card_number, dev->bus->number, dev->devfn);
@@ -903,27 +893,6 @@ static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_i
printk(KERN_INFO "MM%d: CSR 0x%08lx -> 0x%p (0x%lx)\n", card->card_number,
card->csr_base, card->csr_remap, card->csr_len);
-#ifdef CONFIG_MM_MAP_MEMORY
- if (!request_mem_region(card->mem_base, card->mem_len, "Micro Memory")) {
- printk(KERN_ERR "MM%d: Unable to request memory region\n", card->card_number);
- ret = -ENOMEM;
-
- goto failed_req_mem;
- }
-
- if (!(card->mem_remap = ioremap(card->mem_base, cards->mem_len))) {
- printk(KERN_ERR "MM%d: Unable to remap memory region\n", card->card_number);
- ret = -ENOMEM;
-
- goto failed_remap_mem;
- }
-
- printk(KERN_INFO "MM%d: MEM 0x%8lx -> 0x%8lx (0x%lx)\n", card->card_number,
- card->mem_base, card->mem_remap, card->mem_len);
-#else
- printk(KERN_INFO "MM%d: MEM area not remapped (CONFIG_MM_MAP_MEMORY not set)\n",
- card->card_number);
-#endif
switch(card->dev->device) {
case 0x5415:
card->flags |= UM_FLAG_NO_BYTE_STATUS | UM_FLAG_NO_BATTREG;
@@ -1091,12 +1060,6 @@ static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_i
card->mm_pages[1].desc,
card->mm_pages[1].page_dma);
failed_magic:
-#ifdef CONFIG_MM_MAP_MEMORY
- iounmap(card->mem_remap);
- failed_remap_mem:
- release_mem_region(card->mem_base, card->mem_len);
- failed_req_mem:
-#endif
iounmap(card->csr_remap);
failed_remap_csr:
release_mem_region(card->csr_base, card->csr_len);
@@ -1116,10 +1079,6 @@ static void mm_pci_remove(struct pci_dev *dev)
tasklet_kill(&card->tasklet);
iounmap(card->csr_remap);
release_mem_region(card->csr_base, card->csr_len);
-#ifdef CONFIG_MM_MAP_MEMORY
- iounmap(card->mem_remap);
- release_mem_region(card->mem_base, card->mem_len);
-#endif
free_irq(card->irq, card);
if (card->mm_pages[0].desc)
@@ -1133,23 +1092,18 @@ static void mm_pci_remove(struct pci_dev *dev)
blk_cleanup_queue(card->queue);
}
-static const struct pci_device_id mm_pci_ids[] = { {
- .vendor = PCI_VENDOR_ID_MICRO_MEMORY,
- .device = PCI_DEVICE_ID_MICRO_MEMORY_5415CN,
- }, {
- .vendor = PCI_VENDOR_ID_MICRO_MEMORY,
- .device = PCI_DEVICE_ID_MICRO_MEMORY_5425CN,
- }, {
- .vendor = PCI_VENDOR_ID_MICRO_MEMORY,
- .device = PCI_DEVICE_ID_MICRO_MEMORY_6155,
- }, {
+static const struct pci_device_id mm_pci_ids[] = {
+ {PCI_DEVICE(PCI_VENDOR_ID_MICRO_MEMORY,PCI_DEVICE_ID_MICRO_MEMORY_5415CN)},
+ {PCI_DEVICE(PCI_VENDOR_ID_MICRO_MEMORY,PCI_DEVICE_ID_MICRO_MEMORY_5425CN)},
+ {PCI_DEVICE(PCI_VENDOR_ID_MICRO_MEMORY,PCI_DEVICE_ID_MICRO_MEMORY_6155)},
+ {
.vendor = 0x8086,
.device = 0xB555,
.subvendor= 0x1332,
.subdevice= 0x5460,
.class = 0x050000,
.class_mask= 0,
- }, { /* end: all zeroes */ }
+ }, { /* end: all zeroes */ }
};
MODULE_DEVICE_TABLE(pci, mm_pci_ids);
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 7903f9c7839e..713ab05a87c0 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -405,22 +405,6 @@ config ATARILANCE
on the AMD Lance chipset: RieblCard (with or without battery), or
PAMCard VME (also the version by Rhotron, with different addresses).
-config ATARI_BIONET
- tristate "BioNet-100 support"
- depends on ATARI && ATARI_ACSI && BROKEN
- help
- Say Y to include support for BioData's BioNet-100 Ethernet adapter
- for the ACSI port. The driver works (has to work...) with a polled
- I/O scheme, so it's rather slow :-(
-
-config ATARI_PAMSNET
- tristate "PAMsNet support"
- depends on ATARI && ATARI_ACSI && BROKEN
- help
- Say Y to include support for the PAMsNet Ethernet adapter for the
- ACSI port ("ACSI node"). The driver works (has to work...) with a
- polled I/O scheme, so it's rather slow :-(
-
config SUN3LANCE
tristate "Sun3/Sun3x on-board LANCE support"
depends on SUN3 || SUN3X
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index b95b1b237a26..eb4167622a6a 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -181,8 +181,6 @@ obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
obj-$(CONFIG_DECLANCE) += declance.o
obj-$(CONFIG_ATARILANCE) += atarilance.o
-obj-$(CONFIG_ATARI_BIONET) += atari_bionet.o
-obj-$(CONFIG_ATARI_PAMSNET) += atari_pamsnet.o
obj-$(CONFIG_A2065) += a2065.o
obj-$(CONFIG_HYDRA) += hydra.o
obj-$(CONFIG_ARIADNE) += ariadne.o
diff --git a/drivers/net/Space.c b/drivers/net/Space.c
index 1c3e293fbaf7..3b79c6cf21a3 100644
--- a/drivers/net/Space.c
+++ b/drivers/net/Space.c
@@ -75,8 +75,6 @@ extern struct net_device *atarilance_probe(int unit);
extern struct net_device *sun3lance_probe(int unit);
extern struct net_device *sun3_82586_probe(int unit);
extern struct net_device *apne_probe(int unit);
-extern struct net_device *bionet_probe(int unit);
-extern struct net_device *pamsnet_probe(int unit);
extern struct net_device *cs89x0_probe(int unit);
extern struct net_device *hplance_probe(int unit);
extern struct net_device *bagetlance_probe(int unit);
@@ -264,12 +262,6 @@ static struct devprobe2 m68k_probes[] __initdata = {
#ifdef CONFIG_APNE /* A1200 PCMCIA NE2000 */
{apne_probe, 0},
#endif
-#ifdef CONFIG_ATARI_BIONET /* Atari Bionet Ethernet board */
- {bionet_probe, 0},
-#endif
-#ifdef CONFIG_ATARI_PAMSNET /* Atari PAMsNet Ethernet board */
- {pamsnet_probe, 0},
-#endif
#ifdef CONFIG_MVME147_NET /* MVME147 internal Ethernet */
{mvme147lance_probe, 0},
#endif
diff --git a/drivers/net/atari_bionet.c b/drivers/net/atari_bionet.c
deleted file mode 100644
index 3d87bd2b4194..000000000000
--- a/drivers/net/atari_bionet.c
+++ /dev/null
@@ -1,675 +0,0 @@
-/* bionet.c BioNet-100 device driver for linux68k.
- *
- * Version: @(#)bionet.c 1.0 02/06/96
- *
- * Author: Hartmut Laue <laue@ifk-mp.uni-kiel.de>
- * and Torsten Narjes <narjes@ifk-mp.uni-kiel.de>
- *
- * Little adaptions for integration into pl7 by Roman Hodek
- *
- * Some changes in bionet_poll_rx by Karl-Heinz Lohner
- *
- What is it ?
- ------------
- This driver controls the BIONET-100 LAN-Adapter which connects
- an ATARI ST/TT via the ACSI-port to an Ethernet-based network.
-
- This version can be compiled as a loadable module (See the
- compile command at the bottom of this file).
- At load time, you can optionally set the debugging level and the
- fastest response time on the command line of 'insmod'.
-
- 'bionet_debug'
- controls the amount of diagnostic messages:
- 0 : no messages
- >0 : see code for meaning of printed messages
-
- 'bionet_min_poll_time' (always >=1)
- gives the time (in jiffies) between polls. Low values
- increase the system load (beware!)
-
- When loaded, a net device with the name 'bio0' becomes available,
- which can be controlled with the usual 'ifconfig' command.
-
- It is possible to compile this driver into the kernel like other
- (net) drivers. For this purpose, some source files (e.g. config-files
- makefiles, Space.c) must be changed accordingly. (You may refer to
- other drivers how to do it.) In this case, the device will be detected
- at boot time and (probably) appear as 'eth0'.
-
- This code is based on several sources:
- - The driver code for a parallel port ethernet adapter by
- Donald Becker (see file 'atp.c' from the PC linux distribution)
- - The ACSI code by Roman Hodek for the ATARI-ACSI harddisk support
- and DMA handling.
- - Very limited information about moving packets in and out of the
- BIONET-adapter from the TCP package for TOS by BioData GmbH.
-
- Theory of Operation
- -------------------
- Because the ATARI DMA port is usually shared between several
- devices (eg. harddisk, floppy) we cannot block the ACSI bus
- while waiting for interrupts. Therefore we use a polling mechanism
- to fetch packets from the adapter. For the same reason, we send
- packets without checking that the previous packet has been sent to
- the LAN. We rely on the higher levels of the networking code to detect
- missing packets and resend them.
-
- Before we access the ATARI DMA controller, we check if another
- process is using the DMA. If not, we lock the DMA, perform one or
- more packet transfers and unlock the DMA before returning.
- We do not use 'stdma_lock' unconditionally because it is unclear
- if the networking code can be set to sleep, which will happen if
- another (possibly slow) device is using the DMA controller.
-
- The polling is done via timer interrupts which periodically
- 'simulate' an interrupt from the Ethernet adapter. The time (in jiffies)
- between polls varies depending on an estimate of the net activity.
- The allowed range is given by the variable 'bionet_min_poll_time'
- for the lower (fastest) limit and the constant 'MAX_POLL_TIME'
- for the higher (slowest) limit.
-
- Whenever a packet arrives, we switch to fastest response by setting
- the polling time to its lowest limit. If the following poll fails,
- because no packets have arrived, we increase the time for the next
- poll. When the net activity is low, the polling time effectively
- stays at its maximum value, resulting in the lowest load for the
- machine.
- */
-
-#define MAX_POLL_TIME 10
-
-static char version[] =
- "bionet.c:v1.0 06-feb-96 (c) Hartmut Laue.\n";
-
-#include <linux/module.h>
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/jiffies.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-
-#include <asm/setup.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <asm/atarihw.h>
-#include <asm/atariints.h>
-#include <asm/atari_acsi.h>
-#include <asm/atari_stdma.h>
-
-
-/* use 0 for production, 1 for verification, >2 for debug
- */
-#ifndef NET_DEBUG
-#define NET_DEBUG 0
-#endif
-/*
- * Global variable 'bionet_debug'. Can be set at load time by 'insmod'
- */
-unsigned int bionet_debug = NET_DEBUG;
-module_param(bionet_debug, int, 0);
-MODULE_PARM_DESC(bionet_debug, "bionet debug level (0-2)");
-MODULE_LICENSE("GPL");
-
-static unsigned int bionet_min_poll_time = 2;
-
-
-/* Information that need to be kept for each board.
- */
-struct net_local {
- struct net_device_stats stats;
- long open_time; /* for debugging */
- int poll_time; /* polling time varies with net load */
-};
-
-static struct nic_pkt_s { /* packet format */
- unsigned char status;
- unsigned char dummy;
- unsigned char l_lo, l_hi;
- unsigned char buffer[3000];
-} *nic_packet;
-unsigned char *phys_nic_packet;
-
-/* Index to functions, as function prototypes.
- */
-static int bionet_open(struct net_device *dev);
-static int bionet_send_packet(struct sk_buff *skb, struct net_device *dev);
-static void bionet_poll_rx(struct net_device *);
-static int bionet_close(struct net_device *dev);
-static struct net_device_stats *net_get_stats(struct net_device *dev);
-static void bionet_tick(unsigned long);
-
-static DEFINE_TIMER(bionet_timer, bionet_tick, 0, 0);
-
-#define STRAM_ADDR(a) (((a) & 0xff000000) == 0)
-
-/* The following routines access the ethernet board connected to the
- * ACSI port via the st_dma chip.
- */
-#define NODE_ADR 0x60
-
-#define C_READ 8
-#define C_WRITE 0x0a
-#define C_GETEA 0x0f
-#define C_SETCR 0x0e
-
-static int
-sendcmd(unsigned int a0, unsigned int mod, unsigned int cmd) {
- unsigned int c;
-
- dma_wd.dma_mode_status = (mod | ((a0) ? 2 : 0) | 0x88);
- dma_wd.fdc_acces_seccount = cmd;
- dma_wd.dma_mode_status = (mod | 0x8a);
-
- if( !acsi_wait_for_IRQ(HZ/2) ) /* wait for cmd ack */
- return -1; /* timeout */
-
- c = dma_wd.fdc_acces_seccount;
- return (c & 0xff);
-}
-
-
-static void
-set_status(int cr) {
- sendcmd(0,0x100,NODE_ADR | C_SETCR); /* CMD: SET CR */
- sendcmd(1,0x100,cr);
-
- dma_wd.dma_mode_status = 0x80;
-}
-
-static int
-get_status(unsigned char *adr) {
- int i,c;
-
- DISABLE_IRQ();
- c = sendcmd(0,0x00,NODE_ADR | C_GETEA); /* CMD: GET ETH ADR*/
- if( c < 0 ) goto gsend;
-
- /* now read status bytes */
-
- for (i=0; i<6; i++) {
- dma_wd.fdc_acces_seccount = 0; /* request next byte */
-
- if( !acsi_wait_for_IRQ(HZ/2) ) { /* wait for cmd ack */
- c = -1;
- goto gsend; /* timeout */
- }
- c = dma_wd.fdc_acces_seccount;
- *adr++ = (unsigned char)c;
- }
- c = 1;
-gsend:
- dma_wd.dma_mode_status = 0x80;
- return c;
-}
-
-static irqreturn_t
-bionet_intr(int irq, void *data) {
- return IRQ_HANDLED;
-}
-
-
-static int
-get_frame(unsigned long paddr, int odd) {
- int c;
- unsigned long flags;
-
- DISABLE_IRQ();
- local_irq_save(flags);
-
- dma_wd.dma_mode_status = 0x9a;
- dma_wd.dma_mode_status = 0x19a;
- dma_wd.dma_mode_status = 0x9a;
- dma_wd.fdc_acces_seccount = 0x04; /* sector count (was 5) */
- dma_wd.dma_lo = (unsigned char)paddr;
- paddr >>= 8;
- dma_wd.dma_md = (unsigned char)paddr;
- paddr >>= 8;
- dma_wd.dma_hi = (unsigned char)paddr;
- local_irq_restore(flags);
-
- c = sendcmd(0,0x00,NODE_ADR | C_READ); /* CMD: READ */
- if( c < 128 ) goto rend;
-
- /* now read block */
-
- c = sendcmd(1,0x00,odd); /* odd flag for address shift */
- dma_wd.dma_mode_status = 0x0a;
-
- if( !acsi_wait_for_IRQ(100) ) { /* wait for DMA to complete */
- c = -1;
- goto rend;
- }
- dma_wd.dma_mode_status = 0x8a;
- dma_wd.dma_mode_status = 0x18a;
- dma_wd.dma_mode_status = 0x8a;
- c = dma_wd.fdc_acces_seccount;
-
- dma_wd.dma_mode_status = 0x88;
- c = dma_wd.fdc_acces_seccount;
- c = 1;
-
-rend:
- dma_wd.dma_mode_status = 0x80;
- udelay(40);
- acsi_wait_for_noIRQ(20);
- return c;
-}
-
-
-static int
-hardware_send_packet(unsigned long paddr, int cnt) {
- unsigned int c;
- unsigned long flags;
-
- DISABLE_IRQ();
- local_irq_save(flags);
-
- dma_wd.dma_mode_status = 0x19a;
- dma_wd.dma_mode_status = 0x9a;
- dma_wd.dma_mode_status = 0x19a;
- dma_wd.dma_lo = (unsigned char)paddr;
- paddr >>= 8;
- dma_wd.dma_md = (unsigned char)paddr;
- paddr >>= 8;
- dma_wd.dma_hi = (unsigned char)paddr;
-
- dma_wd.fdc_acces_seccount = 0x4; /* sector count */
- local_irq_restore(flags);
-
- c = sendcmd(0,0x100,NODE_ADR | C_WRITE); /* CMD: WRITE */
- c = sendcmd(1,0x100,cnt&0xff);
- c = sendcmd(1,0x100,cnt>>8);
-
- /* now write block */
-
- dma_wd.dma_mode_status = 0x10a; /* DMA enable */
- if( !acsi_wait_for_IRQ(100) ) /* wait for DMA to complete */
- goto end;
-
- dma_wd.dma_mode_status = 0x19a; /* DMA disable ! */
- c = dma_wd.fdc_acces_seccount;
-
-end:
- c = sendcmd(1,0x100,0);
- c = sendcmd(1,0x100,0);
-
- dma_wd.dma_mode_status = 0x180;
- udelay(40);
- acsi_wait_for_noIRQ(20);
- return( c & 0x02);
-}
-
-
-/* Check for a network adaptor of this type, and return '0' if one exists.
- */
-struct net_device * __init bionet_probe(int unit)
-{
- struct net_device *dev;
- unsigned char station_addr[6];
- static unsigned version_printed;
- static int no_more_found; /* avoid "Probing for..." printed 4 times */
- int i;
- int err;
-
- if (!MACH_IS_ATARI || no_more_found)
- return ERR_PTR(-ENODEV);
-
- dev = alloc_etherdev(sizeof(struct net_local));
- if (!dev)
- return ERR_PTR(-ENOMEM);
- if (unit >= 0) {
- sprintf(dev->name, "eth%d", unit);
- netdev_boot_setup_check(dev);
- }
- SET_MODULE_OWNER(dev);
-
- printk("Probing for BioNet 100 Adapter...\n");
-
- stdma_lock(bionet_intr, NULL);
- i = get_status(station_addr); /* Read the station address PROM. */
- ENABLE_IRQ();
- stdma_release();
-
- /* Check the first three octets of the S.A. for the manufactor's code.
- */
-
- if( i < 0
- || station_addr[0] != 'B'
- || station_addr[1] != 'I'
- || station_addr[2] != 'O' ) {
- no_more_found = 1;
- printk( "No BioNet 100 found.\n" );
- free_netdev(dev);
- return ERR_PTR(-ENODEV);
- }
-
- if (bionet_debug > 0 && version_printed++ == 0)
- printk(version);
-
- printk("%s: %s found, eth-addr: %02x-%02x-%02x:%02x-%02x-%02x.\n",
- dev->name, "BioNet 100",
- station_addr[0], station_addr[1], station_addr[2],
- station_addr[3], station_addr[4], station_addr[5]);
-
- /* Initialize the device structure. */
-
- nic_packet = (struct nic_pkt_s *)acsi_buffer;
- phys_nic_packet = (unsigned char *)phys_acsi_buffer;
- if (bionet_debug > 0) {
- printk("nic_packet at 0x%p, phys at 0x%p\n",
- nic_packet, phys_nic_packet );
- }
-
- dev->open = bionet_open;
- dev->stop = bionet_close;
- dev->hard_start_xmit = bionet_send_packet;
- dev->get_stats = net_get_stats;
-
- /* Fill in the fields of the device structure with ethernet-generic
- * values. This should be in a common file instead of per-driver.
- */
-
- for (i = 0; i < ETH_ALEN; i++) {
-#if 0
- dev->broadcast[i] = 0xff;
-#endif
- dev->dev_addr[i] = station_addr[i];
- }
- err = register_netdev(dev);
- if (!err)
- return dev;
- free_netdev(dev);
- return ERR_PTR(err);
-}
-
-/* Open/initialize the board. This is called (in the current kernel)
- sometime after booting when the 'ifconfig' program is run.
-
- This routine should set everything up anew at each open, even
- registers that "should" only need to be set once at boot, so that
- there is non-reboot way to recover if something goes wrong.
- */
-static int
-bionet_open(struct net_device *dev) {
- struct net_local *lp = netdev_priv(dev);
-
- if (bionet_debug > 0)
- printk("bionet_open\n");
- stdma_lock(bionet_intr, NULL);
-
- /* Reset the hardware here.
- */
- set_status(4);
- lp->open_time = 0; /*jiffies*/
- lp->poll_time = MAX_POLL_TIME;
-
- dev->tbusy = 0;
- dev->interrupt = 0;
- dev->start = 1;
-
- stdma_release();
- bionet_timer.data = (long)dev;
- bionet_timer.expires = jiffies + lp->poll_time;
- add_timer(&bionet_timer);
- return 0;
-}
-
-static int
-bionet_send_packet(struct sk_buff *skb, struct net_device *dev) {
- struct net_local *lp = netdev_priv(dev);
- unsigned long flags;
-
- /* Block a timer-based transmit from overlapping. This could better be
- * done with atomic_swap(1, dev->tbusy), but set_bit() works as well.
- */
- local_irq_save(flags);
-
- if (stdma_islocked()) {
- local_irq_restore(flags);
- lp->stats.tx_errors++;
- }
- else {
- int length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
- unsigned long buf = virt_to_phys(skb->data);
- int stat;
-
- stdma_lock(bionet_intr, NULL);
- local_irq_restore(flags);
- if( !STRAM_ADDR(buf+length-1) ) {
- skb_copy_from_linear_data(skb, nic_packet->buffer,
- length);
- buf = (unsigned long)&((struct nic_pkt_s *)phys_nic_packet)->buffer;
- }
-
- if (bionet_debug >1) {
- u_char *data = nic_packet->buffer, *p;
- int i;
-
- printk( "%s: TX pkt type 0x%4x from ", dev->name,
- ((u_short *)data)[6]);
-
- for( p = &data[6], i = 0; i < 6; i++ )
- printk("%02x%s", *p++,i != 5 ? ":" : "" );
- printk(" to ");
-
- for( p = data, i = 0; i < 6; i++ )
- printk("%02x%s", *p++,i != 5 ? ":" : "" "\n" );
-
- printk( "%s: ", dev->name );
- printk(" data %02x%02x %02x%02x%02x%02x %02x%02x%02x%02x %02x%02x%02x%02x %02x%02x%02x%02x"
- " %02x%02x%02x%02x len %d\n",
- data[12], data[13], data[14], data[15], data[16], data[17], data[18], data[19],
- data[20], data[21], data[22], data[23], data[24], data[25], data[26], data[27],
- data[28], data[29], data[30], data[31], data[32], data[33],
- length );
- }
- dma_cache_maintenance(buf, length, 1);
-
- stat = hardware_send_packet(buf, length);
- ENABLE_IRQ();
- stdma_release();
-
- dev->trans_start = jiffies;
- dev->tbusy = 0;
- lp->stats.tx_packets++;
- lp->stats.tx_bytes+=length;
- }
- dev_kfree_skb(skb);
-
- return 0;
-}
-
-/* We have a good packet(s), get it/them out of the buffers.
- */
-static void
-bionet_poll_rx(struct net_device *dev) {
- struct net_local *lp = netdev_priv(dev);
- int boguscount = 10;
- int pkt_len, status;
- unsigned long flags;
-
- local_irq_save(flags);
- /* ++roman: Take care at locking the ST-DMA... This must be done with ints
- * off, since otherwise an int could slip in between the question and the
- * locking itself, and then we'd go to sleep... And locking itself is
- * necessary to keep the floppy_change timer from working with ST-DMA
- * registers. */
- if (stdma_islocked()) {
- local_irq_restore(flags);
- return;
- }
- stdma_lock(bionet_intr, NULL);
- DISABLE_IRQ();
- local_irq_restore(flags);
-
- if( lp->poll_time < MAX_POLL_TIME ) lp->poll_time++;
-
- while(boguscount--) {
- status = get_frame((unsigned long)phys_nic_packet, 0);
-
- if( status == 0 ) break;
-
- /* Good packet... */
-
- dma_cache_maintenance((unsigned long)phys_nic_packet, 1520, 0);
-
- pkt_len = (nic_packet->l_hi << 8) | nic_packet->l_lo;
-
- lp->poll_time = bionet_min_poll_time; /* fast poll */
- if( pkt_len >= 60 && pkt_len <= 1520 ) {
- /* ^^^^ war 1514 KHL */
- /* Malloc up new buffer.
- */
- struct sk_buff *skb = dev_alloc_skb( pkt_len + 2 );
- if (skb == NULL) {
- printk("%s: Memory squeeze, dropping packet.\n",
- dev->name);
- lp->stats.rx_dropped++;
- break;
- }
-
- skb_reserve( skb, 2 ); /* 16 Byte align */
- skb_put( skb, pkt_len ); /* make room */
-
- /* 'skb->data' points to the start of sk_buff data area.
- */
- skb_copy_to_linear_data(skb, nic_packet->buffer,
- pkt_len);
- skb->protocol = eth_type_trans( skb, dev );
- netif_rx(skb);
- dev->last_rx = jiffies;
- lp->stats.rx_packets++;
- lp->stats.rx_bytes+=pkt_len;
-
- /* If any worth-while packets have been received, dev_rint()
- has done a mark_bh(INET_BH) for us and will work on them
- when we get to the bottom-half routine.
- */
-
- if (bionet_debug >1) {
- u_char *data = nic_packet->buffer, *p;
- int i;
-
- printk( "%s: RX pkt type 0x%4x from ", dev->name,
- ((u_short *)data)[6]);
-
-
- for( p = &data[6], i = 0; i < 6; i++ )
- printk("%02x%s", *p++,i != 5 ? ":" : "" );
- printk(" to ");
- for( p = data, i = 0; i < 6; i++ )
- printk("%02x%s", *p++,i != 5 ? ":" : "" "\n" );
-
- printk( "%s: ", dev->name );
- printk(" data %02x%02x %02x%02x%02x%02x %02x%02x%02x%02x %02x%02x%02x%02x %02x%02x%02x%02x"
- " %02x%02x%02x%02x len %d\n",
- data[12], data[13], data[14], data[15], data[16], data[17], data[18], data[19],
- data[20], data[21], data[22], data[23], data[24], data[25], data[26], data[27],
- data[28], data[29], data[30], data[31], data[32], data[33],
- pkt_len );
- }
- }
- else {
- printk(" Packet has wrong length: %04d bytes\n", pkt_len);
- lp->stats.rx_errors++;
- }
- }
- stdma_release();
- ENABLE_IRQ();
- return;
-}
-
-/* bionet_tick: called by bionet_timer. Reads packets from the adapter,
- * passes them to the higher layers and restarts the timer.
- */
-static void
-bionet_tick(unsigned long data) {
- struct net_device *dev = (struct net_device *)data;
- struct net_local *lp = netdev_priv(dev);
-
- if( bionet_debug > 0 && (lp->open_time++ & 7) == 8 )
- printk("bionet_tick: %ld\n", lp->open_time);
-
- if( !stdma_islocked() ) bionet_poll_rx(dev);
-
- bionet_timer.expires = jiffies + lp->poll_time;
- add_timer(&bionet_timer);
-}
-
-/* The inverse routine to bionet_open().
- */
-static int
-bionet_close(struct net_device *dev) {
- struct net_local *lp = netdev_priv(dev);
-
- if (bionet_debug > 0)
- printk("bionet_close, open_time=%ld\n", lp->open_time);
- del_timer(&bionet_timer);
- stdma_lock(bionet_intr, NULL);
-
- set_status(0);
- lp->open_time = 0;
-
- dev->tbusy = 1;
- dev->start = 0;
-
- stdma_release();
- return 0;
-}
-
-/* Get the current statistics.
- This may be called with the card open or closed.
- */
-static struct net_device_stats *net_get_stats(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
- return &lp->stats;
-}
-
-
-#ifdef MODULE
-
-static struct net_device *bio_dev;
-
-int init_module(void)
-{
- bio_dev = bionet_probe(-1);
- if (IS_ERR(bio_dev))
- return PTR_ERR(bio_dev);
- return 0;
-}
-
-void cleanup_module(void)
-{
- unregister_netdev(bio_dev);
- free_netdev(bio_dev);
-}
-
-#endif /* MODULE */
-
-/* Local variables:
- * compile-command: "gcc -D__KERNEL__ -I/usr/src/linux/include
- -b m68k-linuxaout -Wall -Wstrict-prototypes -O2
- -fomit-frame-pointer -pipe -DMODULE -I../../net/inet -c bionet.c"
- * version-control: t
- * kept-new-versions: 5
- * tab-width: 8
- * End:
- */
diff --git a/drivers/net/atari_pamsnet.c b/drivers/net/atari_pamsnet.c
deleted file mode 100644
index f7356374a2e7..000000000000
--- a/drivers/net/atari_pamsnet.c
+++ /dev/null
@@ -1,878 +0,0 @@
-/* atari_pamsnet.c PAMsNet device driver for linux68k.
- *
- * Version: @(#)PAMsNet.c 0.2ß 03/31/96
- *
- * Author: Torsten Lang <Torsten.Lang@ap.physik.uni-giessen.de>
- * <Torsten.Lang@jung.de>
- *
- * This driver is based on my driver PAMSDMA.c for MiNT-Net and
- * on the driver bionet.c written by
- * Hartmut Laue <laue@ifk-mp.uni-kiel.de>
- * and Torsten Narjes <narjes@ifk-mp.uni-kiel.de>
- *
- * Little adaptions for integration into pl7 by Roman Hodek
- *
- What is it ?
- ------------
- This driver controls the PAMsNet LAN-Adapter which connects
- an ATARI ST/TT via the ACSI-port to an Ethernet-based network.
-
- This version can be compiled as a loadable module (See the
- compile command at the bottom of this file).
- At load time, you can optionally set the debugging level and the
- fastest response time on the command line of 'insmod'.
-
- 'pamsnet_debug'
- controls the amount of diagnostic messages:
- 0 : no messages
- >0 : see code for meaning of printed messages
-
- 'pamsnet_min_poll_time' (always >=1)
- gives the time (in jiffies) between polls. Low values
- increase the system load (beware!)
-
- When loaded, a net device with the name 'eth?' becomes available,
- which can be controlled with the usual 'ifconfig' command.
-
- It is possible to compile this driver into the kernel like other
- (net) drivers. For this purpose, some source files (e.g. config-files
- makefiles, Space.c) must be changed accordingly. (You may refer to
- other drivers how to do it.) In this case, the device will be detected
- at boot time and (probably) appear as 'eth0'.
-
- Theory of Operation
- -------------------
- Because the ATARI DMA port is usually shared between several
- devices (eg. harddisk, floppy) we cannot block the ACSI bus
- while waiting for interrupts. Therefore we use a polling mechanism
- to fetch packets from the adapter. For the same reason, we send
- packets without checking that the previous packet has been sent to
- the LAN. We rely on the higher levels of the networking code to detect
- missing packets and resend them.
-
- Before we access the ATARI DMA controller, we check if another
- process is using the DMA. If not, we lock the DMA, perform one or
- more packet transfers and unlock the DMA before returning.
- We do not use 'stdma_lock' unconditionally because it is unclear
- if the networking code can be set to sleep, which will happen if
- another (possibly slow) device is using the DMA controller.
-
- The polling is done via timer interrupts which periodically
- 'simulate' an interrupt from the Ethernet adapter. The time (in jiffies)
- between polls varies depending on an estimate of the net activity.
- The allowed range is given by the variable 'bionet_min_poll_time'
- for the lower (fastest) limit and the constant 'MAX_POLL_TIME'
- for the higher (slowest) limit.
-
- Whenever a packet arrives, we switch to fastest response by setting
- the polling time to its lowest limit. If the following poll fails,
- because no packets have arrived, we increase the time for the next
- poll. When the net activity is low, the polling time effectively
- stays at its maximum value, resulting in the lowest load for the
- machine.
- */
-
-#define MAX_POLL_TIME 10
-
-static char *version =
- "pamsnet.c:v0.2beta 30-mar-96 (c) Torsten Lang.\n";
-
-#include <linux/module.h>
-
-#include <linux/kernel.h>
-#include <linux/jiffies.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/bitops.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <linux/errno.h>
-#include <asm/atarihw.h>
-#include <asm/atariints.h>
-#include <asm/atari_stdma.h>
-#include <asm/atari_acsi.h>
-
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-
-#undef READ
-#undef WRITE
-
-/* use 0 for production, 1 for verification, >2 for debug
- */
-#ifndef NET_DEBUG
-#define NET_DEBUG 0
-#endif
-/*
- * Global variable 'pamsnet_debug'. Can be set at load time by 'insmod'
- */
-unsigned int pamsnet_debug = NET_DEBUG;
-module_param(pamsnet_debug, int, 0);
-MODULE_PARM_DESC(pamsnet_debug, "pamsnet debug enable (0-1)");
-MODULE_LICENSE("GPL");
-
-static unsigned int pamsnet_min_poll_time = 2;
-
-
-/* Information that need to be kept for each board.
- */
-struct net_local {
- struct net_device_stats stats;
- long open_time; /* for debugging */
- int poll_time; /* polling time varies with net load */
-};
-
-static struct nic_pkt_s { /* packet format */
- unsigned char buffer[2048];
-} *nic_packet = 0;
-unsigned char *phys_nic_packet;
-
-typedef unsigned char HADDR[6]; /* 6-byte hardware address of lance */
-
-/* Index to functions, as function prototypes.
- */
-static void start (int target);
-static int stop (int target);
-static int testpkt (int target);
-static int sendpkt (int target, unsigned char *buffer, int length);
-static int receivepkt (int target, unsigned char *buffer);
-static int inquiry (int target, unsigned char *buffer);
-static HADDR *read_hw_addr(int target, unsigned char *buffer);
-static void setup_dma (void *address, unsigned rw_flag, int num_blocks);
-static int send_first (int target, unsigned char byte);
-static int send_1_5 (int lun, unsigned char *command, int dma);
-static int get_status (void);
-static int calc_received (void *start_address);
-
-static int pamsnet_open(struct net_device *dev);
-static int pamsnet_send_packet(struct sk_buff *skb, struct net_device *dev);
-static void pamsnet_poll_rx(struct net_device *);
-static int pamsnet_close(struct net_device *dev);
-static struct net_device_stats *net_get_stats(struct net_device *dev);
-static void pamsnet_tick(unsigned long);
-
-static irqreturn_t pamsnet_intr(int irq, void *data);
-
-static DEFINE_TIMER(pamsnet_timer, pamsnet_tick, 0, 0);
-
-#define STRAM_ADDR(a) (((a) & 0xff000000) == 0)
-
-typedef struct
-{
- unsigned char reserved1[0x38];
- HADDR hwaddr;
- unsigned char reserved2[0x1c2];
-} DMAHWADDR;
-
-/*
- * Definitions of commands understood by the PAMs DMA adaptor.
- *
- * In general the DMA adaptor uses LUN 0, 5, 6 and 7 on one ID changeable
- * by the PAM's Net software.
- *
- * LUN 0 works as a harddisk. You can boot the PAM's Net driver there.
- * LUN 5 works as a harddisk and lets you access the RAM and some I/O HW
- * area. In sector 0, bytes 0x38-0x3d you find the ethernet HW address
- * of the adaptor.
- * LUN 6 works as a harddisk and lets you access the firmware ROM.
- * LUN 7 lets you send and receive packets.
- *
- * Some commands like the INQUIRY command work identical on all used LUNs.
- *
- * UNKNOWN1 seems to read some data.
- * Command length is 6 bytes.
- * UNKNOWN2 seems to read some data (command byte 1 must be !=0). The
- * following bytes seem to be something like an allocation length.
- * Command length is 6 bytes.
- * READPKT reads a packet received by the DMA adaptor.
- * Command length is 6 bytes.
- * WRITEPKT sends a packet transferred by the following DMA phase. The length
- * of the packet is transferred in command bytes 3 and 4.
- * The adaptor automatically replaces the src hw address in an ethernet
- * packet by its own hw address.
- * Command length is 6 bytes.
- * INQUIRY has the same function as the INQUIRY command supported by harddisks
- * and other SCSI devices. It lets you detect which device you found
- * at a given address.
- * Command length is 6 bytes.
- * START initializes the DMA adaptor. After this command it is able to send
- * and receive packets. There is no status byte returned!
- * Command length is 1 byte.
- * NUMPKTS gives back the number of received packets waiting in the queue in
- * the status byte.
- * Command length is 1 byte.
- * UNKNOWN3
- * UNKNOWN4 Function of these three commands is unknown.
- * UNKNOWN5 The command length of these three commands is 1 byte.
- * DESELECT immediately deselects the DMA adaptor. May important with interrupt
- * driven operation.
- * Command length is 1 byte.
- * STOP resets the DMA adaptor. After this command packets can no longer
- * be received or transferred.
- * Command length is 6 byte.
- */
-
-enum {UNKNOWN1=3, READPKT=8, UNKNOWN2, WRITEPKT=10, INQUIRY=18, START,
- NUMPKTS=22, UNKNOWN3, UNKNOWN4, UNKNOWN5, DESELECT, STOP};
-
-#define READSECTOR READPKT
-#define WRITESECTOR WRITEPKT
-
-u_char *inquire8="MV PAM's NET/GK";
-
-#define DMALOW dma_wd.dma_lo
-#define DMAMID dma_wd.dma_md
-#define DMAHIGH dma_wd.dma_hi
-#define DACCESS dma_wd.fdc_acces_seccount
-
-#define MFP_GPIP mfp.par_dt_reg
-
-/* Some useful functions */
-
-#define INT (!(MFP_GPIP & 0x20))
-#define DELAY ({MFP_GPIP; MFP_GPIP; MFP_GPIP;})
-#define WRITEMODE(value) \
- ({ u_short dummy = value; \
- __asm__ volatile("movew %0, 0xFFFF8606" : : "d"(dummy)); \
- DELAY; \
- })
-#define WRITEBOTH(value1, value2) \
- ({ u_long dummy = (u_long)(value1)<<16 | (u_short)(value2); \
- __asm__ volatile("movel %0, 0xFFFF8604" : : "d"(dummy)); \
- DELAY; \
- })
-
-/* Definitions for DMODE */
-
-#define READ 0x000
-#define WRITE 0x100
-
-#define DMA_FDC 0x080
-#define DMA_ACSI 0x000
-
-#define DMA_DISABLE 0x040
-
-#define SEC_COUNT 0x010
-#define DMA_WINDOW 0x000
-
-#define REG_ACSI 0x008
-#define REG_FDC 0x000
-
-#define A1 0x002
-
-/* Timeout constants */
-
-#define TIMEOUTCMD HZ/2 /* ca. 500ms */
-#define TIMEOUTDMA HZ /* ca. 1s */
-#define COMMAND_DELAY 500 /* ca. 0.5ms */
-
-unsigned rw;
-int lance_target = -1;
-int if_up = 0;
-
-/* The following routines access the ethernet board connected to the
- * ACSI port via the st_dma chip.
- */
-
-/* The following lowlevel routines work on physical addresses only and assume
- * that eventually needed buffers are
- * - completely located in ST RAM
- * - are contigous in the physical address space
- */
-
-/* Setup the DMA counter */
-
-static void
-setup_dma (void *address, unsigned rw_flag, int num_blocks)
-{
- WRITEMODE((unsigned) rw_flag | DMA_FDC | SEC_COUNT | REG_ACSI |
- A1);
- WRITEMODE((unsigned)(rw_flag ^ WRITE) | DMA_FDC | SEC_COUNT | REG_ACSI |
- A1);
- WRITEMODE((unsigned) rw_flag | DMA_FDC | SEC_COUNT | REG_ACSI |
- A1);
- DMALOW = (unsigned char)((unsigned long)address & 0xFF);
- DMAMID = (unsigned char)(((unsigned long)address >> 8) & 0xFF);
- DMAHIGH = (unsigned char)(((unsigned long)address >> 16) & 0xFF);
- WRITEBOTH((unsigned)num_blocks & 0xFF,
- rw_flag | DMA_FDC | DMA_WINDOW | REG_ACSI | A1);
- rw = rw_flag;
-}
-
-/* Send the first byte of an command block */
-
-static int
-send_first (int target, unsigned char byte)
-{
- rw = READ;
- acsi_delay_end(COMMAND_DELAY);
- /*
- * wake up ACSI
- */
- WRITEMODE(DMA_FDC | DMA_WINDOW | REG_ACSI);
- /*
- * write command byte
- */
- WRITEBOTH((target << 5) | (byte & 0x1F), DMA_FDC |
- DMA_WINDOW | REG_ACSI | A1);
- return (!acsi_wait_for_IRQ(TIMEOUTCMD));
-}
-
-/* Send the rest of an command block */
-
-static int
-send_1_5 (int lun, unsigned char *command, int dma)
-{
- int i, j;
-
- for (i=0; i<5; i++) {
- WRITEBOTH((!i ? (((lun & 0x7) << 5) | (command[i] & 0x1F))
- : command[i]),
- rw | REG_ACSI | DMA_WINDOW |
- ((i < 4) ? DMA_FDC
- : (dma ? DMA_ACSI
- : DMA_FDC)) | A1);
- if (i < 4 && (j = !acsi_wait_for_IRQ(TIMEOUTCMD)))
- return (j);
- }
- return (0);
-}
-
-/* Read a status byte */
-
-static int
-get_status (void)
-{
- WRITEMODE(DMA_FDC | DMA_WINDOW | REG_ACSI | A1);
- acsi_delay_start();
- return ((int)(DACCESS & 0xFF));
-}
-
-/* Calculate the number of received bytes */
-
-static int
-calc_received (void *start_address)
-{
- return (int)(
- (((unsigned long)DMAHIGH << 16) | ((unsigned)DMAMID << 8) | DMALOW)
- - (unsigned long)start_address);
-}
-
-/* The following midlevel routines still work on physical addresses ... */
-
-/* start() starts the PAM's DMA adaptor */
-
-static void
-start (int target)
-{
- send_first(target, START);
-}
-
-/* stop() stops the PAM's DMA adaptor and returns a value of zero in case of success */
-
-static int
-stop (int target)
-{
- int ret = -1;
- unsigned char cmd_buffer[5];
-
- if (send_first(target, STOP))
- goto bad;
- cmd_buffer[0] = cmd_buffer[1] = cmd_buffer[2] =
- cmd_buffer[3] = cmd_buffer[4] = 0;
- if (send_1_5(7, cmd_buffer, 0) ||
- !acsi_wait_for_IRQ(TIMEOUTDMA) ||
- get_status())
- goto bad;
- ret = 0;
-bad:
- return (ret);
-}
-
-/* testpkt() returns the number of received packets waiting in the queue */
-
-static int
-testpkt(int target)
-{
- int ret = -1;
-
- if (send_first(target, NUMPKTS))
- goto bad;
- ret = get_status();
-bad:
- return (ret);
-}
-
-/* inquiry() returns 0 when PAM's DMA found, -1 when timeout, -2 otherwise */
-/* Please note: The buffer is for internal use only but must be defined! */
-
-static int
-inquiry (int target, unsigned char *buffer)
-{
- int ret = -1;
- unsigned char *vbuffer = phys_to_virt((unsigned long)buffer);
- unsigned char cmd_buffer[5];
-
- if (send_first(target, INQUIRY))
- goto bad;
- setup_dma(buffer, READ, 1);
- vbuffer[8] = vbuffer[27] = 0; /* Avoid confusion with previous read data */
- cmd_buffer[0] = cmd_buffer[1] = cmd_buffer[2] = cmd_buffer[4] = 0;
- cmd_buffer[3] = 48;
- if (send_1_5(5, cmd_buffer, 1) ||
- !acsi_wait_for_IRQ(TIMEOUTDMA) ||
- get_status() ||
- (calc_received(buffer) < 32))
- goto bad;
- dma_cache_maintenance((unsigned long)(buffer+8), 20, 0);
- if (memcmp(inquire8, vbuffer+8, 20))
- goto bad;
- ret = 0;
-bad:
- if (!!NET_DEBUG) {
- vbuffer[8+20]=0;
- printk("inquiry of target %d: %s\n", target, vbuffer+8);
- }
- return (ret);
-}
-
-/*
- * read_hw_addr() reads the sector containing the hwaddr and returns
- * a pointer to it (virtual address!) or 0 in case of an error
- */
-
-static HADDR
-*read_hw_addr(int target, unsigned char *buffer)
-{
- HADDR *ret = 0;
- unsigned char cmd_buffer[5];
-
- if (send_first(target, READSECTOR))
- goto bad;
- setup_dma(buffer, READ, 1);
- cmd_buffer[0] = cmd_buffer[1] = cmd_buffer[2] = cmd_buffer[4] = 0;
- cmd_buffer[3] = 1;
- if (send_1_5(5, cmd_buffer, 1) ||
- !acsi_wait_for_IRQ(TIMEOUTDMA) ||
- get_status())
- goto bad;
- ret = phys_to_virt((unsigned long)&(((DMAHWADDR *)buffer)->hwaddr));
- dma_cache_maintenance((unsigned long)buffer, 512, 0);
-bad:
- return (ret);
-}
-
-static irqreturn_t
-pamsnet_intr(int irq, void *data)
-{
- return IRQ_HANDLED;
-}
-
-/* receivepkt() loads a packet to a given buffer and returns its length */
-
-static int
-receivepkt (int target, unsigned char *buffer)
-{
- int ret = -1;
- unsigned char cmd_buffer[5];
-
- if (send_first(target, READPKT))
- goto bad;
- setup_dma(buffer, READ, 3);
- cmd_buffer[0] = cmd_buffer[1] = cmd_buffer[2] = cmd_buffer[4] = 0;
- cmd_buffer[3] = 3;
- if (send_1_5(7, cmd_buffer, 1) ||
- !acsi_wait_for_IRQ(TIMEOUTDMA) ||
- get_status())
- goto bad;
- ret = calc_received(buffer);
-bad:
- return (ret);
-}
-
-/* sendpkt() sends a packet and returns a value of zero when the packet was sent
- successfully */
-
-static int
-sendpkt (int target, unsigned char *buffer, int length)
-{
- int ret = -1;
- unsigned char cmd_buffer[5];
-
- if (send_first(target, WRITEPKT))
- goto bad;
- setup_dma(buffer, WRITE, 3);
- cmd_buffer[0] = cmd_buffer[1] = cmd_buffer[4] = 0;
- cmd_buffer[2] = length >> 8;
- cmd_buffer[3] = length & 0xFF;
- if (send_1_5(7, cmd_buffer, 1) ||
- !acsi_wait_for_IRQ(TIMEOUTDMA) ||
- get_status())
- goto bad;
- ret = 0;
-bad:
- return (ret);
-}
-
-/* The following higher level routines work on virtual addresses and convert them to
- * physical addresses when passed to the lowlevel routines. It's up to the higher level
- * routines to copy data from Alternate RAM to ST RAM if neccesary!
- */
-
-/* Check for a network adaptor of this type, and return '0' if one exists.
- */
-
-struct net_device * __init pamsnet_probe (int unit)
-{
- struct net_device *dev;
- int i;
- HADDR *hwaddr;
- int err;
-
- unsigned char station_addr[6];
- static unsigned version_printed;
- /* avoid "Probing for..." printed 4 times - the driver is supporting only one adapter now! */
- static int no_more_found;
-
- if (no_more_found)
- return ERR_PTR(-ENODEV);
- no_more_found = 1;
-
- dev = alloc_etherdev(sizeof(struct net_local));
- if (!dev)
- return ERR_PTR(-ENOMEM);
- if (unit >= 0) {
- sprintf(dev->name, "eth%d", unit);
- netdev_boot_setup_check(dev);
- }
- SET_MODULE_OWNER(dev);
-
- printk("Probing for PAM's Net/GK Adapter...\n");
-
- /* Allocate the DMA buffer here since we need it for probing! */
-
- nic_packet = (struct nic_pkt_s *)acsi_buffer;
- phys_nic_packet = (unsigned char *)phys_acsi_buffer;
- if (pamsnet_debug > 0) {
- printk("nic_packet at 0x%p, phys at 0x%p\n",
- nic_packet, phys_nic_packet );
- }
-
- stdma_lock(pamsnet_intr, NULL);
- DISABLE_IRQ();
-
- for (i=0; i<8; i++) {
- /* Do two inquiries to cover cases with strange equipment on previous ID */
- /* blocking the ACSI bus (like the SLMC804 laser printer controller... */
- inquiry(i, phys_nic_packet);
- if (!inquiry(i, phys_nic_packet)) {
- lance_target = i;
- break;
- }
- }
-
- if (!!NET_DEBUG)
- printk("ID: %d\n",i);
-
- if (lance_target >= 0) {
- if (!(hwaddr = read_hw_addr(lance_target, phys_nic_packet)))
- lance_target = -1;
- else
- memcpy (station_addr, hwaddr, ETH_ALEN);
- }
-
- ENABLE_IRQ();
- stdma_release();
-
- if (lance_target < 0) {
- printk("No PAM's Net/GK found.\n");
- free_netdev(dev);
- return ERR_PTR(-ENODEV);
- }
-
- if (pamsnet_debug > 0 && version_printed++ == 0)
- printk(version);
-
- printk("%s: %s found on target %01d, eth-addr: %02x:%02x:%02x:%02x:%02x:%02x.\n",
- dev->name, "PAM's Net/GK", lance_target,
- station_addr[0], station_addr[1], station_addr[2],
- station_addr[3], station_addr[4], station_addr[5]);
-
- /* Initialize the device structure. */
- dev->open = pamsnet_open;
- dev->stop = pamsnet_close;
- dev->hard_start_xmit = pamsnet_send_packet;
- dev->get_stats = net_get_stats;
-
- /* Fill in the fields of the device structure with ethernet-generic
- * values. This should be in a common file instead of per-driver.
- */
-
- for (i = 0; i < ETH_ALEN; i++) {
-#if 0
- dev->broadcast[i] = 0xff;
-#endif
- dev->dev_addr[i] = station_addr[i];
- }
- err = register_netdev(dev);
- if (!err)
- return dev;
-
- free_netdev(dev);
- return ERR_PTR(err);
-}
-
-/* Open/initialize the board. This is called (in the current kernel)
- sometime after booting when the 'ifconfig' program is run.
-
- This routine should set everything up anew at each open, even
- registers that "should" only need to be set once at boot, so that
- there is non-reboot way to recover if something goes wrong.
- */
-static int
-pamsnet_open(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
-
- if (pamsnet_debug > 0)
- printk("pamsnet_open\n");
- stdma_lock(pamsnet_intr, NULL);
- DISABLE_IRQ();
-
- /* Reset the hardware here.
- */
- if (!if_up)
- start(lance_target);
- if_up = 1;
- lp->open_time = 0; /*jiffies*/
- lp->poll_time = MAX_POLL_TIME;
-
- dev->tbusy = 0;
- dev->interrupt = 0;
- dev->start = 1;
-
- ENABLE_IRQ();
- stdma_release();
- pamsnet_timer.data = (long)dev;
- pamsnet_timer.expires = jiffies + lp->poll_time;
- add_timer(&pamsnet_timer);
- return 0;
-}
-
-static int
-pamsnet_send_packet(struct sk_buff *skb, struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
- unsigned long flags;
-
- /* Block a timer-based transmit from overlapping. This could better be
- * done with atomic_swap(1, dev->tbusy), but set_bit() works as well.
- */
- local_irq_save(flags);
-
- if (stdma_islocked()) {
- local_irq_restore(flags);
- lp->stats.tx_errors++;
- }
- else {
- int length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
- unsigned long buf = virt_to_phys(skb->data);
- int stat;
-
- stdma_lock(pamsnet_intr, NULL);
- DISABLE_IRQ();
-
- local_irq_restore(flags);
- if( !STRAM_ADDR(buf+length-1) ) {
- skb_copy_from_linear_data(skb, nic_packet->buffer,
- length);
- buf = (unsigned long)phys_nic_packet;
- }
-
- dma_cache_maintenance(buf, length, 1);
-
- stat = sendpkt(lance_target, (unsigned char *)buf, length);
- ENABLE_IRQ();
- stdma_release();
-
- dev->trans_start = jiffies;
- dev->tbusy = 0;
- lp->stats.tx_packets++;
- lp->stats.tx_bytes+=length;
- }
- dev_kfree_skb(skb);
-
- return 0;
-}
-
-/* We have a good packet(s), get it/them out of the buffers.
- */
-static void
-pamsnet_poll_rx(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
- int boguscount;
- int pkt_len;
- struct sk_buff *skb;
- unsigned long flags;
-
- local_irq_save(flags);
- /* ++roman: Take care at locking the ST-DMA... This must be done with ints
- * off, since otherwise an int could slip in between the question and the
- * locking itself, and then we'd go to sleep... And locking itself is
- * necessary to keep the floppy_change timer from working with ST-DMA
- * registers. */
- if (stdma_islocked()) {
- local_irq_restore(flags);
- return;
- }
- stdma_lock(pamsnet_intr, NULL);
- DISABLE_IRQ();
- local_irq_restore(flags);
-
- boguscount = testpkt(lance_target);
- if( lp->poll_time < MAX_POLL_TIME ) lp->poll_time++;
-
- while(boguscount--) {
- pkt_len = receivepkt(lance_target, phys_nic_packet);
-
- if( pkt_len < 60 ) break;
-
- /* Good packet... */
-
- dma_cache_maintenance((unsigned long)phys_nic_packet, pkt_len, 0);
-
- lp->poll_time = pamsnet_min_poll_time; /* fast poll */
- if( pkt_len >= 60 && pkt_len <= 2048 ) {
- if (pkt_len > 1514)
- pkt_len = 1514;
-
- /* Malloc up new buffer.
- */
- skb = alloc_skb(pkt_len, GFP_ATOMIC);
- if (skb == NULL) {
- printk("%s: Memory squeeze, dropping packet.\n",
- dev->name);
- lp->stats.rx_dropped++;
- break;
- }
- skb->len = pkt_len;
- skb->dev = dev;
-
- /* 'skb->data' points to the start of sk_buff data area.
- */
- skb_copy_to_linear_data(skb, nic_packet->buffer,
- pkt_len);
- netif_rx(skb);
- dev->last_rx = jiffies;
- lp->stats.rx_packets++;
- lp->stats.rx_bytes+=pkt_len;
- }
- }
-
- /* If any worth-while packets have been received, dev_rint()
- has done a mark_bh(INET_BH) for us and will work on them
- when we get to the bottom-half routine.
- */
-
- ENABLE_IRQ();
- stdma_release();
- return;
-}
-
-/* pamsnet_tick: called by pamsnet_timer. Reads packets from the adapter,
- * passes them to the higher layers and restarts the timer.
- */
-static void
-pamsnet_tick(unsigned long data)
-{
- struct net_device *dev = (struct net_device *)data;
- struct net_local *lp = netdev_priv(dev);
-
- if( pamsnet_debug > 0 && (lp->open_time++ & 7) == 8 )
- printk("pamsnet_tick: %ld\n", lp->open_time);
-
- pamsnet_poll_rx(dev);
-
- pamsnet_timer.expires = jiffies + lp->poll_time;
- add_timer(&pamsnet_timer);
-}
-
-/* The inverse routine to pamsnet_open().
- */
-static int
-pamsnet_close(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
-
- if (pamsnet_debug > 0)
- printk("pamsnet_close, open_time=%ld\n", lp->open_time);
- del_timer(&pamsnet_timer);
- stdma_lock(pamsnet_intr, NULL);
- DISABLE_IRQ();
-
- if (if_up)
- stop(lance_target);
- if_up = 0;
-
- lp->open_time = 0;
-
- dev->tbusy = 1;
- dev->start = 0;
-
- ENABLE_IRQ();
- stdma_release();
- return 0;
-}
-
-/* Get the current statistics.
- This may be called with the card open or closed.
- */
-static struct net_device_stats *net_get_stats(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
- return &lp->stats;
-}
-
-
-#ifdef MODULE
-
-static struct net_device *pam_dev;
-
-int init_module(void)
-{
- pam_dev = pamsnet_probe(-1);
- if (IS_ERR(pam_dev))
- return PTR_ERR(pam_dev);
- return 0;
-}
-
-void cleanup_module(void)
-{
- unregister_netdev(pam_dev);
- free_netdev(pam_dev);
-}
-
-#endif /* MODULE */
-
-/* Local variables:
- * compile-command: "gcc -D__KERNEL__ -I/usr/src/linux/include
- -b m68k-linuxaout -Wall -Wstrict-prototypes -O2
- -fomit-frame-pointer -pipe -DMODULE -I../../net/inet -c atari_pamsnet.c"
- * version-control: t
- * kept-new-versions: 5
- * tab-width: 8
- * End:
- */
diff --git a/fs/splice.c b/fs/splice.c
index 6c9828651e6f..53fc2082a468 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -1061,8 +1061,9 @@ ssize_t splice_direct_to_actor(struct file *in, struct splice_desc *sd,
while (len) {
size_t read_len;
+ loff_t pos = sd->pos;
- ret = do_splice_to(in, &sd->pos, pipe, len, flags);
+ ret = do_splice_to(in, &pos, pipe, len, flags);
if (unlikely(ret <= 0))
goto out_release;
@@ -1080,6 +1081,7 @@ ssize_t splice_direct_to_actor(struct file *in, struct splice_desc *sd,
bytes += ret;
len -= ret;
+ sd->pos = pos;
if (ret < read_len)
goto out_release;
diff --git a/include/asm-m68k/atari_SLM.h b/include/asm-m68k/atari_SLM.h
deleted file mode 100644
index 42f4fcdd8bc7..000000000000
--- a/include/asm-m68k/atari_SLM.h
+++ /dev/null
@@ -1,28 +0,0 @@
-
-#ifndef _ATARI_SLM_H
-#define _ATARI_SLM_H
-
-/* Atari SLM laser printer specific ioctls */
-
-#define SLMIOGSTAT 0xa100
-#define SLMIOGPSIZE 0xa101
-#define SLMIOGMFEED 0xa102
-
-#define SLMIORESET 0xa140
-
-#define SLMIOSPSIZE 0xa181
-#define SLMIOSMFEED 0xa182
-
-/* Status returning structure (SLMIOGSTAT) */
-struct SLM_status {
- int stat; /* numeric status code */
- char str[40]; /* status string */
-};
-
-/* Paper size structure (SLMIO[GS]PSIZE) */
-struct SLM_paper_size {
- int width;
- int height;
-};
-
-#endif /* _ATARI_SLM_H */
diff --git a/include/asm-m68k/atari_acsi.h b/include/asm-m68k/atari_acsi.h
deleted file mode 100644
index 10fea68f191a..000000000000
--- a/include/asm-m68k/atari_acsi.h
+++ /dev/null
@@ -1,37 +0,0 @@
-#ifndef _ASM_ATARI_ACSI_H
-#define _ASM_ATARI_ACSI_H
-
-/* Functions exported by drivers/block/acsi.c */
-
-void acsi_delay_start( void );
-void acsi_delay_end( long usec );
-int acsi_wait_for_IRQ( unsigned timeout );
-int acsi_wait_for_noIRQ( unsigned timeout );
-int acsicmd_nodma( const char *cmd, int enable);
-int acsi_getstatus( void );
-int acsi_extstatus( char *buffer, int cnt );
-void acsi_end_extstatus( void );
-int acsi_extcmd( unsigned char *buffer, int cnt );
-
-/* The ACSI buffer is guarantueed to reside in ST-RAM and may be used by other
- * drivers that work on the ACSI bus, too. It's data are valid only as long as
- * the ST-DMA is locked. */
-extern char *acsi_buffer;
-extern unsigned long phys_acsi_buffer;
-
-/* Utility macros */
-
-/* Send one data byte over the bus and set mode for next operation
- * with one move.l -- Atari recommends this...
- */
-
-#define DMA_LONG_WRITE(data,mode) \
- do { \
- *((unsigned long *)&dma_wd.fdc_acces_seccount) = \
- ((data)<<16) | (mode); \
- } while(0)
-
-#define ENABLE_IRQ() atari_turnon_irq( IRQ_MFP_ACSI )
-#define DISABLE_IRQ() atari_turnoff_irq( IRQ_MFP_ACSI )
-
-#endif /* _ASM_ATARI_ACSI_H */