diff options
54 files changed, 1304 insertions, 422 deletions
diff --git a/Documentation/RCU/RTFP.txt b/Documentation/RCU/RTFP.txt index 3b0876c77355..588d97366a46 100644 --- a/Documentation/RCU/RTFP.txt +++ b/Documentation/RCU/RTFP.txt @@ -847,7 +847,7 @@ Symposium on Distributed Computing} 'It's entirely possible that the current user could be replaced by RCU and/or seqlocks, and we could get rid of brlocks entirely.' . - Steve Hemminger responds by replacing them with RCU. + Stephen Hemminger responds by replacing them with RCU. } } diff --git a/Documentation/admin-guide/kernel-parameters.rst b/Documentation/admin-guide/kernel-parameters.rst index 24302cad174a..3996b54158bf 100644 --- a/Documentation/admin-guide/kernel-parameters.rst +++ b/Documentation/admin-guide/kernel-parameters.rst @@ -68,6 +68,13 @@ For example one can add to the command line following parameter: where the final item represents CPUs 100,101,125,126,150,151,... +The value "N" can be used to represent the numerically last CPU on the system, +i.e "foo_cpus=16-N" would be equivalent to "16-31" on a 32 core system. + +Keep in mind that "N" is dynamic, so if system changes cause the bitmap width +to change, such as less cores in the CPU list, then N and any ranges using N +will also change. Use the same on a small 4 core system, and "16-N" becomes +"16-3" and now the same boot input will be flagged as invalid (start > end). This document may not be entirely up to date and comprehensive. The command diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 70a30f65bfca..fa08ec0dfbe7 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -4077,9 +4077,7 @@ see CONFIG_RAS_CEC help text. rcu_nocbs= [KNL] - The argument is a cpu list, as described above, - except that the string "all" can be used to - specify every CPU on the system. + The argument is a cpu list, as described above. In kernels built with CONFIG_RCU_NOCB_CPU=y, set the specified list of CPUs to be no-callback CPUs. @@ -4268,6 +4266,18 @@ rcuscale.kfree_rcu_test= [KNL] Set to measure performance of kfree_rcu() flooding. + rcuscale.kfree_rcu_test_double= [KNL] + Test the double-argument variant of kfree_rcu(). + If this parameter has the same value as + rcuscale.kfree_rcu_test_single, both the single- + and double-argument variants are tested. + + rcuscale.kfree_rcu_test_single= [KNL] + Test the single-argument variant of kfree_rcu(). + If this parameter has the same value as + rcuscale.kfree_rcu_test_double, both the single- + and double-argument variants are tested. + rcuscale.kfree_nthreads= [KNL] The number of threads running loops of kfree_rcu(). diff --git a/include/linux/mm.h b/include/linux/mm.h index 06094627f1c1..21115933b9b8 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -3180,7 +3180,11 @@ unsigned long wp_shared_mapping_range(struct address_space *mapping, extern int sysctl_nr_trim_pages; +#ifdef CONFIG_PRINTK void mem_dump_obj(void *object); +#else +static inline void mem_dump_obj(void *object) {} +#endif #endif /* __KERNEL__ */ #endif /* _LINUX_MM_H */ diff --git a/include/linux/rcu_segcblist.h b/include/linux/rcu_segcblist.h index 8afe886e85f1..3db96c4f45fd 100644 --- a/include/linux/rcu_segcblist.h +++ b/include/linux/rcu_segcblist.h @@ -109,7 +109,7 @@ struct rcu_cblist { * | SEGCBLIST_KTHREAD_GP | * | | * | Kthreads handle callbacks holding nocb_lock, local rcu_core() stops | - * | handling callbacks. | + * | handling callbacks. Enable bypass queueing. | * ---------------------------------------------------------------------------- */ @@ -125,7 +125,7 @@ struct rcu_cblist { * | SEGCBLIST_KTHREAD_GP | * | | * | CB/GP kthreads handle callbacks holding nocb_lock, local rcu_core() | - * | ignores callbacks. | + * | ignores callbacks. Bypass enqueue is enabled. | * ---------------------------------------------------------------------------- * | * v @@ -134,7 +134,8 @@ struct rcu_cblist { * | SEGCBLIST_KTHREAD_GP | * | | * | CB/GP kthreads and local rcu_core() handle callbacks concurrently | - * | holding nocb_lock. Wake up CB and GP kthreads if necessary. | + * | holding nocb_lock. Wake up CB and GP kthreads if necessary. Disable | + * | bypass enqueue. | * ---------------------------------------------------------------------------- * | * v diff --git a/include/linux/rculist_nulls.h b/include/linux/rculist_nulls.h index ff3e94779e73..d8afdb8784c1 100644 --- a/include/linux/rculist_nulls.h +++ b/include/linux/rculist_nulls.h @@ -161,7 +161,7 @@ static inline void hlist_nulls_add_fake(struct hlist_nulls_node *n) * * The barrier() is needed to make sure compiler doesn't cache first element [1], * as this loop can be restarted [2] - * [1] Documentation/core-api/atomic_ops.rst around line 114 + * [1] Documentation/memory-barriers.txt around line 1533 * [2] Documentation/RCU/rculist_nulls.rst around line 146 */ #define hlist_nulls_for_each_entry_rcu(tpos, pos, head, member) \ diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 6d855ef091ba..9455476c5ba2 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -882,7 +882,7 @@ static inline notrace void rcu_read_unlock_sched_notrace(void) * The BUILD_BUG_ON check must not involve any function calls, hence the * checks are done in macros here. */ -#define kfree_rcu kvfree_rcu +#define kfree_rcu(ptr, rhf...) kvfree_rcu(ptr, ## rhf) /** * kvfree_rcu() - kvfree an object after a grace period. diff --git a/include/linux/rcutiny.h b/include/linux/rcutiny.h index 2a97334eb786..35e0be326ffc 100644 --- a/include/linux/rcutiny.h +++ b/include/linux/rcutiny.h @@ -17,10 +17,9 @@ /* Never flag non-existent other CPUs! */ static inline bool rcu_eqs_special_set(int cpu) { return false; } -static inline unsigned long get_state_synchronize_rcu(void) -{ - return 0; -} +unsigned long get_state_synchronize_rcu(void); +unsigned long start_poll_synchronize_rcu(void); +bool poll_state_synchronize_rcu(unsigned long oldstate); static inline void cond_synchronize_rcu(unsigned long oldstate) { diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h index df578b73960f..b89b54130f49 100644 --- a/include/linux/rcutree.h +++ b/include/linux/rcutree.h @@ -41,6 +41,8 @@ void rcu_momentary_dyntick_idle(void); void kfree_rcu_scheduler_running(void); bool rcu_gp_might_be_stalled(void); unsigned long get_state_synchronize_rcu(void); +unsigned long start_poll_synchronize_rcu(void); +bool poll_state_synchronize_rcu(unsigned long oldstate); void cond_synchronize_rcu(unsigned long oldstate); void rcu_idle_enter(void); diff --git a/include/linux/slab.h b/include/linux/slab.h index 7ae604076767..0c97d788762c 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -186,8 +186,10 @@ void kfree(const void *); void kfree_sensitive(const void *); size_t __ksize(const void *); size_t ksize(const void *); +#ifdef CONFIG_PRINTK bool kmem_valid_obj(void *object); void kmem_dump_obj(void *object); +#endif #ifdef CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR void __check_heap_object(const void *ptr, unsigned long n, struct page *page, diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h index df92211cf771..3de7be6dd17c 100644 --- a/include/linux/vmalloc.h +++ b/include/linux/vmalloc.h @@ -241,7 +241,7 @@ pcpu_free_vm_areas(struct vm_struct **vms, int nr_vms) int register_vmap_purge_notifier(struct notifier_block *nb); int unregister_vmap_purge_notifier(struct notifier_block *nb); -#ifdef CONFIG_MMU +#if defined(CONFIG_MMU) && defined(CONFIG_PRINTK) bool vmalloc_dump_obj(void *object); #else static inline bool vmalloc_dump_obj(void *object) { return false; } diff --git a/include/trace/events/rcu.h b/include/trace/events/rcu.h index 5fc29400e1a2..c7711e9b6900 100644 --- a/include/trace/events/rcu.h +++ b/include/trace/events/rcu.h @@ -432,6 +432,34 @@ TRACE_EVENT_RCU(rcu_fqs, __entry->cpu, __entry->qsevent) ); +/* + * Tracepoint for RCU stall events. Takes a string identifying the RCU flavor + * and a string identifying which function detected the RCU stall as follows: + * + * "StallDetected": Scheduler-tick detects other CPU's stalls. + * "SelfDetected": Scheduler-tick detects a current CPU's stall. + * "ExpeditedStall": Expedited grace period detects stalls. + */ +TRACE_EVENT(rcu_stall_warning, + + TP_PROTO(const char *rcuname, const char *msg), + + TP_ARGS(rcuname, msg), + + TP_STRUCT__entry( + __field(const char *, rcuname) + __field(const char *, msg) + ), + + TP_fast_assign( + __entry->rcuname = rcuname; + __entry->msg = msg; + ), + + TP_printk("%s %s", + __entry->rcuname, __entry->msg) +); + #endif /* #if defined(CONFIG_TREE_RCU) */ /* diff --git a/kernel/rcu/rcu_segcblist.c b/kernel/rcu/rcu_segcblist.c index 7f181c9675f7..aaa111237b60 100644 --- a/kernel/rcu/rcu_segcblist.c +++ b/kernel/rcu/rcu_segcblist.c @@ -261,8 +261,7 @@ void rcu_segcblist_disable(struct rcu_segcblist *rsclp) } /* - * Mark the specified rcu_segcblist structure as offloaded. This - * structure must be empty. + * Mark the specified rcu_segcblist structure as offloaded. */ void rcu_segcblist_offload(struct rcu_segcblist *rsclp, bool offload) { diff --git a/kernel/rcu/rcuscale.c b/kernel/rcu/rcuscale.c index 06491d5530db..dca51fe9c73f 100644 --- a/kernel/rcu/rcuscale.c +++ b/kernel/rcu/rcuscale.c @@ -625,6 +625,8 @@ rcu_scale_shutdown(void *arg) torture_param(int, kfree_nthreads, -1, "Number of threads running loops of kfree_rcu()."); torture_param(int, kfree_alloc_num, 8000, "Number of allocations and frees done in an iteration."); torture_param(int, kfree_loops, 10, "Number of loops doing kfree_alloc_num allocations and frees."); +torture_param(bool, kfree_rcu_test_double, false, "Do we run a kfree_rcu() double-argument scale test?"); +torture_param(bool, kfree_rcu_test_single, false, "Do we run a kfree_rcu() single-argument scale test?"); static struct task_struct **kfree_reader_tasks; static int kfree_nrealthreads; @@ -644,10 +646,13 @@ kfree_scale_thread(void *arg) struct kfree_obj *alloc_ptr; u64 start_time, end_time; long long mem_begin, mem_during = 0; + bool kfree_rcu_test_both; + DEFINE_TORTURE_RANDOM(tr); VERBOSE_SCALEOUT_STRING("kfree_scale_thread task started"); set_cpus_allowed_ptr(current, cpumask_of(me % nr_cpu_ids)); set_user_nice(current, MAX_NICE); + kfree_rcu_test_both = (kfree_rcu_test_single == kfree_rcu_test_double); start_time = ktime_get_mono_fast_ns(); @@ -670,7 +675,15 @@ kfree_scale_thread(void *arg) if (!alloc_ptr) return -ENOMEM; - kfree_rcu(alloc_ptr, rh); + // By default kfree_rcu_test_single and kfree_rcu_test_double are + // initialized to false. If both have the same value (false or true) + // both are randomly tested, otherwise only the one with value true + // is tested. + if ((kfree_rcu_test_single && !kfree_rcu_test_double) || + (kfree_rcu_test_both && torture_random(&tr) & 0x800)) + kfree_rcu(alloc_ptr); + else + kfree_rcu(alloc_ptr, rh); } cond_resched(); diff --git a/kernel/rcu/rcutorture.c b/kernel/rcu/rcutorture.c index 99657ffa6688..29d2f4c647d3 100644 --- a/kernel/rcu/rcutorture.c +++ b/kernel/rcu/rcutorture.c @@ -245,11 +245,11 @@ static const char *rcu_torture_writer_state_getname(void) return rcu_torture_writer_state_names[i]; } -#if defined(CONFIG_RCU_BOOST) && !defined(CONFIG_HOTPLUG_CPU) -#define rcu_can_boost() 1 -#else /* #if defined(CONFIG_RCU_BOOST) && !defined(CONFIG_HOTPLUG_CPU) */ -#define rcu_can_boost() 0 -#endif /* #else #if defined(CONFIG_RCU_BOOST) && !defined(CONFIG_HOTPLUG_CPU) */ +#if defined(CONFIG_RCU_BOOST) && defined(CONFIG_PREEMPT_RT) +# define rcu_can_boost() 1 +#else +# define rcu_can_boost() 0 +#endif #ifdef CONFIG_RCU_TRACE static u64 notrace rcu_trace_clock_local(void) @@ -494,6 +494,8 @@ static struct rcu_torture_ops rcu_ops = { .sync = synchronize_rcu, .exp_sync = synchronize_rcu_expedited, .get_gp_state = get_state_synchronize_rcu, + .start_gp_poll = start_poll_synchronize_rcu, + .poll_gp_state = poll_state_synchronize_rcu, .cond_sync = cond_synchronize_rcu, .call = call_rcu, .cb_barrier = rcu_barrier, @@ -923,9 +925,13 @@ static void rcu_torture_enable_rt_throttle(void) static bool rcu_torture_boost_failed(unsigned long start, unsigned long end) { + static int dbg_done; + if (end - start > test_boost_duration * HZ - HZ / 2) { VERBOSE_TOROUT_STRING("rcu_torture_boost boosting failed"); n_rcu_torture_boost_failure++; + if (!xchg(&dbg_done, 1) && cur_ops->gp_kthread_dbg) + cur_ops->gp_kthread_dbg(); return true; /* failed */ } @@ -948,8 +954,8 @@ static int rcu_torture_boost(void *arg) init_rcu_head_on_stack(&rbi.rcu); /* Each pass through the following loop does one boost-test cycle. */ do { - /* Track if the test failed already in this test interval? */ - bool failed = false; + bool failed = false; // Test failed already in this test interval + bool firsttime = true; /* Increment n_rcu_torture_boosts once per boost-test */ while (!kthread_should_stop()) { @@ -975,18 +981,17 @@ static int rcu_torture_boost(void *arg) /* Do one boost-test interval. */ endtime = oldstarttime + test_boost_duration * HZ; - call_rcu_time = jiffies; while (time_before(jiffies, endtime)) { /* If we don't have a callback in flight, post one. */ if (!smp_load_acquire(&rbi.inflight)) { /* RCU core before ->inflight = 1. */ smp_store_release(&rbi.inflight, 1); - call_rcu(&rbi.rcu, rcu_torture_boost_cb); + cur_ops->call(&rbi.rcu, rcu_torture_boost_cb); /* Check if the boost test failed */ - failed = failed || - rcu_torture_boost_failed(call_rcu_time, - jiffies); + if (!firsttime && !failed) + failed = rcu_torture_boost_failed(call_rcu_time, jiffies); call_rcu_time = jiffies; + firsttime = false; } if (stutter_wait("rcu_torture_boost")) sched_set_fifo_low(current); @@ -999,7 +1004,7 @@ static int rcu_torture_boost(void *arg) * this case the boost check would never happen in the above * loop so do another one here. */ - if (!failed && smp_load_acquire(&rbi.inflight)) + if (!firsttime && !failed && smp_load_acquire(&rbi.inflight)) rcu_torture_boost_failed(call_rcu_time, jiffies); /* @@ -1025,6 +1030,9 @@ checkwait: if (stutter_wait("rcu_torture_boost")) sched_set_fifo_low(current); } while (!torture_must_stop()); + while (smp_load_acquire(&rbi.inflight)) + schedule_timeout_uninterruptible(1); // rcu_barrier() deadlocks. + /* Clean up and exit. */ while (!kthread_should_stop() || smp_load_acquire(&rbi.inflight)) { torture_shutdown_absorb("rcu_torture_boost"); @@ -1223,14 +1231,6 @@ rcu_torture_writer(void *arg) WARN_ON_ONCE(1); break; } - if (cur_ops->get_gp_state && cur_ops->poll_gp_state) - WARN_ONCE(rcu_torture_writer_state != RTWS_DEF_FREE && - !cur_ops->poll_gp_state(cookie), - "%s: Cookie check 2 failed %s(%d) %lu->%lu\n", - __func__, - rcu_torture_writer_state_getname(), - rcu_torture_writer_state, - cookie, cur_ops->get_gp_state()); } WRITE_ONCE(rcu_torture_current_version, rcu_torture_current_version + 1); @@ -1589,7 +1589,7 @@ static bool rcu_torture_one_read(struct torture_random_state *trsp, long myid) preempt_enable(); if (cur_ops->get_gp_state && cur_ops->poll_gp_state) WARN_ONCE(cur_ops->poll_gp_state(cookie), - "%s: Cookie check 3 failed %s(%d) %lu->%lu\n", + "%s: Cookie check 2 failed %s(%d) %lu->%lu\n", __func__, rcu_torture_writer_state_getname(), rcu_torture_writer_state, @@ -1797,7 +1797,7 @@ rcu_torture_stats_print(void) WARN_ON_ONCE(n_rcu_torture_barrier_error); // rcu_barrier() WARN_ON_ONCE(n_rcu_torture_boost_ktrerror); // no boost kthread WARN_ON_ONCE(n_rcu_torture_boost_rterror); // can't set RT prio - WARN_ON_ONCE(n_rcu_torture_boost_failure); // RCU boost failed + WARN_ON_ONCE(n_rcu_torture_boost_failure); // boost failed (TIMER_SOFTIRQ RT prio?) WARN_ON_ONCE(i > 1); // Too-short grace period } pr_cont("Reader Pipe: "); @@ -1861,6 +1861,45 @@ rcu_torture_stats(void *arg) torture_shutdown_absorb("rcu_torture_stats"); } while (!torture_must_stop()); torture_kthread_stopping("rcu_torture_stats"); + + { + struct rcu_head *rhp; + struct kmem_cache *kcp; + static int z; + + kcp = kmem_cache_create("rcuscale", 136, 8, SLAB_STORE_USER, NULL); + rhp = kmem_cache_alloc(kcp, GFP_KERNEL); + pr_alert("mem_dump_obj() slab test: rcu_torture_stats = %px, &rhp = %px, rhp = %px, &z = %px\n", stats_task, &rhp, rhp, &z); + pr_alert("mem_dump_obj(ZERO_SIZE_PTR):"); + mem_dump_obj(ZERO_SIZE_PTR); + pr_alert("mem_dump_obj(NULL):"); + mem_dump_obj(NULL); + pr_alert("mem_dump_obj(%px):", &rhp); + mem_dump_obj(&rhp); + pr_alert("mem_dump_obj(%px):", rhp); + mem_dump_obj(rhp); + pr_alert("mem_dump_obj(%px):", &rhp->func); + mem_dump_obj(&rhp->func); + pr_alert("mem_dump_obj(%px):", &z); + mem_dump_obj(&z); + kmem_cache_free(kcp, rhp); + kmem_cache_destroy(kcp); + rhp = kmalloc(sizeof(*rhp), GFP_KERNEL); + pr_alert("mem_dump_obj() kmalloc test: rcu_torture_stats = %px, &rhp = %px, rhp = %px\n", stats_task, &rhp, rhp); + pr_alert("mem_dump_obj(kmalloc %px):", rhp); + mem_dump_obj(rhp); + pr_alert("mem_dump_obj(kmalloc %px):", &rhp->func); + mem_dump_obj(&rhp->func); + kfree(rhp); + rhp = vmalloc(4096); + pr_alert("mem_dump_obj() vmalloc test: rcu_torture_stats = %px, &rhp = %px, rhp = %px\n", stats_task, &rhp, rhp); + pr_alert("mem_dump_obj(vmalloc %px):", rhp); + mem_dump_obj(rhp); + pr_alert("mem_dump_obj(vmalloc %px):", &rhp->func); + mem_dump_obj(&rhp->func); + vfree(rhp); + } + return 0; } @@ -1971,8 +2010,8 @@ static int rcu_torture_stall(void *args) local_irq_disable(); else if (!stall_cpu_block) preempt_disable(); - pr_alert("rcu_torture_stall start on CPU %d.\n", - raw_smp_processor_id()); + pr_alert("%s start on CPU %d.\n", + __func__, raw_smp_processor_id()); while (ULONG_CMP_LT((unsigned long)ktime_get_seconds(), stop_at)) if (stall_cpu_block) @@ -1983,7 +2022,7 @@ static int rcu_torture_stall(void *args) preempt_enable(); cur_ops->readunlock(idx); } - pr_alert("rcu_torture_stall end.\n"); + pr_alert("%s end.\n", __func__); torture_shutdown_absorb("rcu_torture_stall"); while (!kthread_should_stop()) schedule_timeout_interruptible(10 * HZ); @@ -2595,6 +2634,8 @@ static bool rcu_torture_can_boost(void) if (!(test_boost == 1 && cur_ops->can_boost) && test_boost != 2) return false; + if (!cur_ops->call) + return false; prio = rcu_get_gp_kthreads_prio(); if (!prio) diff --git a/kernel/rcu/tasks.h b/kernel/rcu/tasks.h index af7c19439f4e..350ebf5051f9 100644 --- a/kernel/rcu/tasks.h +++ b/kernel/rcu/tasks.h @@ -20,7 +20,7 @@ typedef void (*holdouts_func_t)(struct list_head *hop, bool ndrpt, bool *frptp); typedef void (*postgp_func_t)(struct rcu_tasks *rtp); /** - * Definition for a Tasks-RCU-like mechanism. + * struct rcu_tasks - Definition for a Tasks-RCU-like mechanism. * @cbs_head: Head of callback list. * @cbs_tail: Tail pointer for callback list. * @cbs_wq: Wait queue allowning new callback to get kthread's attention. @@ -38,7 +38,7 @@ typedef void (*postgp_func_t)(struct rcu_tasks *rtp); * @pregp_func: This flavor's pre-grace-period function (optional). * @pertask_func: This flavor's per-task scan function (optional). * @postscan_func: This flavor's post-task scan function (optional). - * @holdout_func: This flavor's holdout-list scan function (optional). + * @holdouts_func: This flavor's holdout-list scan function (optional). * @postgp_func: This flavor's post-grace-period function (optional). * @call_func: This flavor's call_rcu()-equivalent function. * @name: This flavor's textual name. @@ -726,6 +726,42 @@ EXPORT_SYMBOL_GPL(show_rcu_tasks_rude_gp_kthread); // flavors, rcu_preempt and rcu_sched. The fact that RCU Tasks Trace // readers can operate from idle, offline, and exception entry/exit in no // way allows rcu_preempt and rcu_sched readers to also do so. +// +// The implementation uses rcu_tasks_wait_gp(), which relies on function +// pointers in the rcu_tasks structure. The rcu_spawn_tasks_trace_kthread() +// function sets these function pointers up so that rcu_tasks_wait_gp() +// invokes these functions in this order: +// +// rcu_tasks_trace_pregp_step(): +// Initialize the count of readers and block CPU-hotplug operations. +// rcu_tasks_trace_pertask(), invoked on every non-idle task: +// Initialize per-task state and attempt to identify an immediate +// quiescent state for that task, or, failing that, attempt to +// set that task's .need_qs flag so that task's next outermost +// rcu_read_unlock_trace() will report the quiescent state (in which +// case the count of readers is incremented). If both attempts fail, +// the task is added to a "holdout" list. +// rcu_tasks_trace_postscan(): +// Initialize state and attempt to identify an immediate quiescent +// state as above (but only for idle tasks), unblock CPU-hotplug +// operations, and wait for an RCU grace period to avoid races with +// tasks that are in the process of exiting. +// check_all_holdout_tasks_trace(), repeatedly until holdout list is empty: +// Scans the holdout list, attempting to identify a quiescent state +// for each task on the list. If there is a quiescent state, the +// corresponding task is removed from the holdout list. +// rcu_tasks_trace_postgp(): +// Wait for the count of readers do drop to zero, reporting any stalls. +// Also execute full memory barriers to maintain ordering with code +// executing after the grace period. +// +// The exit_tasks_rcu_finish_trace() synchronizes with exiting tasks. +// +// Pre-grace-period update-side code is ordered before the grace +// period via the ->cbs_lock and barriers in rcu_tasks_kthread(). +// Pre-grace-period read-side code is ordered before the grace period by +// atomic_dec_and_test() of the count of readers (for IPIed readers) and by +// scheduler context-switch ordering (for locked-down non-running readers). // The lockdep state must be outside of #ifdef to be useful. #ifdef CONFIG_DEBUG_LOCK_ALLOC diff --git a/kernel/rcu/tiny.c b/kernel/rcu/tiny.c index aa897c3f2e92..c8a029fbb114 100644 --- a/kernel/rcu/tiny.c +++ b/kernel/rcu/tiny.c @@ -32,12 +32,14 @@ struct rcu_ctrlblk { struct rcu_head *rcucblist; /* List of pending callbacks (CBs). */ struct rcu_head **donetail; /* ->next pointer of last "done" CB. */ struct rcu_head **curtail; /* ->next pointer of last CB. */ + unsigned long gp_seq; /* Grace-period counter. */ }; /* Definition for rcupdate control block. */ static struct rcu_ctrlblk rcu_ctrlblk = { .donetail = &rcu_ctrlblk.rcucblist, .curtail = &rcu_ctrlblk.rcucblist, + .gp_seq = 0 - 300UL, }; void rcu_barrier(void) @@ -56,6 +58,7 @@ void rcu_qs(void) rcu_ctrlblk.donetail = rcu_ctrlblk.curtail; raise_softirq_irqoff(RCU_SOFTIRQ); } + WRITE_ONCE(rcu_ctrlblk.gp_seq, rcu_ctrlblk.gp_seq + 1); local_irq_restore(flags); } @@ -177,6 +180,43 @@ void call_rcu(struct rcu_head *head, rcu_callback_t func) } EXPORT_SYMBOL_GPL(call_rcu); +/* + * Return a grace-period-counter "cookie". For more information, + * see the Tree RCU header comment. + */ +unsigned long get_state_synchronize_rcu(void) +{ + return READ_ONCE(rcu_ctrlblk.gp_seq); +} +EXPORT_SYMBOL_GPL(get_state_synchronize_rcu); + +/* + * Return a grace-period-counter "cookie" and ensure that a future grace + * period completes. For more information, see the Tree RCU header comment. + */ +unsigned long start_poll_synchronize_rcu(void) +{ + unsigned long gp_seq = get_state_synchronize_rcu(); + + if (unlikely(is_idle_task(current))) { + /* force scheduling for rcu_qs() */ + resched_cpu(0); + } + return gp_seq; +} +EXPORT_SYMBOL_GPL(start_poll_synchronize_rcu); + +/* + * Return true if the grace period corresponding to oldstate has completed + * and false otherwise. For more information, see the Tree RCU header + * comment. + */ +bool poll_state_synchronize_rcu(unsigned long oldstate) +{ + return READ_ONCE(rcu_ctrlblk.gp_seq) != oldstate; +} +EXPORT_SYMBOL_GPL(poll_state_synchronize_rcu); + void __init rcu_init(void) { open_softirq(RCU_SOFTIRQ, rcu_process_callbacks); diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c index da6f5213fb74..8e78b2430c16 100644 --- a/kernel/rcu/tree.c +++ b/kernel/rcu/tree.c @@ -156,6 +156,7 @@ static void invoke_rcu_core(void); static void rcu_report_exp_rdp(struct rcu_data *rdp); static void sync_sched_exp_online_cleanup(int cpu); static void check_cb_ovld_locked(struct rcu_data *rdp, struct rcu_node *rnp); +static bool rcu_rdp_is_offloaded(struct rcu_data *rdp); /* rcuc/rcub kthread realtime priority */ static int kthread_prio = IS_ENABLED(CONFIG_RCU_BOOST) ? 1 : 0; @@ -648,7 +649,6 @@ static noinstr void rcu_eqs_enter(bool user) instrumentation_begin(); trace_rcu_dyntick(TPS("Start"), rdp->dynticks_nesting, 0, atomic_read(&rdp->dynticks)); WARN_ON_ONCE(IS_ENABLED(CONFIG_RCU_EQS_DEBUG) && !user && !is_idle_task(current)); - rdp = this_cpu_ptr(&rcu_data); rcu_prepare_for_idle(); rcu_preempt_deferred_qs(current); @@ -1077,7 +1077,6 @@ noinstr void rcu_nmi_enter(void) } else if (!in_nmi()) { instrumentation_begin(); rcu_irq_enter_check_tick(); - instrumentation_end(); } else { instrumentation_begin(); } @@ -1672,7 +1671,7 @@ static bool __note_gp_changes(struct rcu_node *rnp, struct rcu_data *rdp) { bool ret = false; bool need_qs; - const bool offloaded = rcu_segcblist_is_offloaded(&rdp->cblist); + const bool offloaded = rcu_rdp_is_offloaded(rdp); raw_lockdep_assert_held_rcu_node(rnp); @@ -2128,7 +2127,7 @@ static void rcu_gp_cleanup(void) needgp = true; } /* Advance CBs to reduce false positives below. */ - offloaded = rcu_segcblist_is_offloaded(&rdp->cblist); + offloaded = rcu_rdp_is_offloaded(rdp); if ((offloaded || !rcu_accelerate_cbs(rnp, rdp)) && needgp) { WRITE_ONCE(rcu_state.gp_flags, RCU_GP_FLAG_INIT); WRITE_ONCE(rcu_state.gp_req_activity, jiffies); @@ -2327,7 +2326,7 @@ rcu_report_qs_rdp(struct rcu_data *rdp) unsigned long flags; unsigned long mask; bool needwake = false; - const bool offloaded = rcu_segcblist_is_offloaded(&rdp->cblist); + const bool offloaded = rcu_rdp_is_offloaded(rdp); struct rcu_node *rnp; WARN_ON_ONCE(rdp->cpu != smp_processor_id()); @@ -2414,7 +2413,7 @@ int rcutree_dying_cpu(unsigned int cpu) blkd = !!(rnp->qsmask & rdp->grpmask); trace_rcu_grace_period(rcu_state.name, READ_ONCE(rnp->gp_seq), - blkd ? TPS("cpuofl") : TPS("cpuofl-bgp")); + blkd ? TPS("cpuofl-bgp") : TPS("cpuofl")); return 0; } @@ -2497,7 +2496,7 @@ static void rcu_do_batch(struct rcu_data *rdp) int div; bool __maybe_unused empty; unsigned long flags; - const bool offloaded = rcu_segcblist_is_offloaded(&rdp->cblist); + const bool offloaded = rcu_rdp_is_offloaded(rdp); struct rcu_head *rhp; struct rcu_cblist rcl = RCU_CBLIST_INITIALIZER(rcl); long bl, count = 0; @@ -3066,7 +3065,7 @@ __call_rcu(struct rcu_head *head, rcu_callback_t func) trace_rcu_segcb_stats(&rdp->cblist, TPS("SegCBQueued")); /* Go handle any RCU core processing required. */ - if (unlikely(rcu_segcblist_is_offloaded(&rdp->cblist))) { + if (unlikely(rcu_rdp_is_offloaded(rdp))) { __call_rcu_nocb_wake(rdp, was_alldone, flags); /* unlocks */ } else { __call_rcu_core(rdp, head, flags); @@ -3229,8 +3228,7 @@ krc_this_cpu_lock(unsigned long *flags) static inline void krc_this_cpu_unlock(struct kfree_rcu_cpu *krcp, unsigned long flags) { - raw_spin_unlock(&krcp->lock); - local_irq_restore(flags); + raw_spin_unlock_irqrestore(&krcp->lock, flags); } static inline struct kvfree_rcu_bulk_data * @@ -3464,7 +3462,7 @@ static void fill_page_cache_func(struct work_struct *work) for (i = 0; i < rcu_min_cached_objs; i++) { bnode = (struct kvfree_rcu_bulk_data *) - __get_free_page(GFP_KERNEL | __GFP_NOWARN); + __get_free_page(GFP_KERNEL | __GFP_NORETRY | __GFP_NOMEMALLOC | __GFP_NOWARN); if (bnode) { raw_spin_lock_irqsave(&krcp->lock, flags); @@ -3493,37 +3491,62 @@ run_page_cache_worker(struct kfree_rcu_cpu *krcp) } } +// Record ptr in a page managed by krcp, with the pre-krc_this_cpu_lock() +// state specified by flags. If can_alloc is true, the caller must +// be schedulable and not be holding any locks or mutexes that might be +// acquired by the memory allocator or anything that it might invoke. +// Returns true if ptr was successfully recorded, else the caller must +// use a fallback. static inline bool -kvfree_call_rcu_add_ptr_to_bulk(struct kfree_rcu_cpu *krcp, void *ptr) +add_ptr_to_bulk_krc_lock(struct kfree_rcu_cpu **krcp, + unsigned long *flags, void *ptr, bool can_alloc) { struct kvfree_rcu_bulk_data *bnode; int idx; - if (unlikely(!krcp->initialized)) + *krcp = krc_this_cpu_lock(flags); + if (unlikely(!(*krcp)->initialized)) return false; - lockdep_assert_held(&krcp->lock); idx = !!is_vmalloc_addr(ptr); /* Check if a new block is required. */ - if (!krcp->bkvhead[idx] || - krcp->bkvhead[idx]->nr_records == KVFREE_BULK_MAX_ENTR) { - bnode = get_cached_bnode(krcp); - /* Switch to emergency path. */ + if (!(*krcp)->bkvhead[idx] || + (*krcp)->bkvhead[idx]->nr_records == KVFREE_BULK_MAX_ENTR) { + bnode = get_cached_bnode(*krcp); + if (!bnode && can_alloc) { + krc_this_cpu_unlock(*krcp, *flags); + + // __GFP_NORETRY - allows a light-weight direct reclaim + // what is OK from minimizing of fallback hitting point of + // view. Apart of that it forbids any OOM invoking what is + // also beneficial since we are about to release memory soon. + // + // __GFP_NOMEMALLOC - prevents from consuming of all the + // memory reserves. Please note we have a fallback path. + // + // __GFP_NOWARN - it is supposed that an allocation can + // be failed under low memory or high memory pressure + // scenarios. + bnode = (struct kvfree_rcu_bulk_data *) + __get_free_page(GFP_KERNEL | __GFP_NORETRY | __GFP_NOMEMALLOC | __GFP_NOWARN); + *krcp = krc_this_cpu_lock(flags); + } + if (!bnode) return false; /* Initialize the new block. */ bnode->nr_records = 0; - bnode->next = krcp->bkvhead[idx]; + bnode->next = (*krcp)->bkvhead[idx]; /* Attach it to the head. */ - krcp->bkvhead[idx] = bnode; + (*krcp)->bkvhead[idx] = bnode; } /* Finally insert. */ - krcp->bkvhead[idx]->records - [krcp->bkvhead[idx]->nr_records++] = ptr; + (*krcp)->bkvhead[idx]->records + [(*krcp)->bkvhead[idx]->nr_records++] = ptr; return true; } @@ -3561,8 +3584,6 @@ void kvfree_call_rcu(struct rcu_head *head, rcu_callback_t func) ptr = (unsigned long *) func; } - krcp = krc_this_cpu_lock(&flags); - // Queue the object but don't yet schedule the batch. if (debug_rcu_head_queue(ptr)) { // Probable double kfree_rcu(), just leak. @@ -3570,12 +3591,11 @@ void kvfree_call_rcu(struct rcu_head *head, rcu_callback_t func) __func__, head); // Mark as success and leave. - success = true; - goto unlock_return; + return; } kasan_record_aux_stack(ptr); - success = kvfree_call_rcu_add_ptr_to_bulk(krcp, ptr); + success = add_ptr_to_bulk_krc_lock(&krcp, &flags, ptr, !head); if (!success) { run_page_cache_worker(krcp); @@ -3774,8 +3794,8 @@ EXPORT_SYMBOL_GPL(synchronize_rcu); * get_state_synchronize_rcu - Snapshot current RCU state * * Returns a cookie that is used by a later call to cond_synchronize_rcu() - * to determine whether or not a full grace period has elapsed in the - * meantime. + * or poll_state_synchronize_rcu() to determine whether or not a full + * grace period has elapsed in the meantime. */ unsigned long get_state_synchronize_rcu(void) { @@ -3789,13 +3809,76 @@ unsigned long get_state_synchronize_rcu(void) EXPORT_SYMBOL_GPL(get_state_synchronize_rcu); /** + * start_poll_synchronize_rcu - Snapshot and start RCU grace period + * + * Returns a cookie that is used by a later call to cond_synchronize_rcu() + * or poll_state_synchronize_rcu() to determine whether or not a full + * grace period has elapsed in the meantime. If the needed grace period + * is not already slated to start, notifies RCU core of the need for that + * grace period. + * + * Interrupts must be enabled for the case where it is necessary to awaken + * the grace-period kthread. + */ +unsigned long start_poll_synchronize_rcu(void) +{ + unsigned long flags; + unsigned long gp_seq = get_state_synchronize_rcu(); + bool needwake; + struct rcu_data *rdp; + struct rcu_node *rnp; + + lockdep_assert_irqs_enabled(); + local_irq_save(flags); + rdp = this_cpu_ptr(&rcu_data); + rnp = rdp->mynode; + raw_spin_lock_rcu_node(rnp); // irqs already disabled. + needwake = rcu_start_this_gp(rnp, rdp, gp_seq); + raw_spin_unlock_irqrestore_rcu_node(rnp, flags); + if (needwake) + rcu_gp_kthread_wake(); + return gp_seq; +} +EXPORT_SYMBOL_GPL(start_poll_synchronize_rcu); + +/** + * poll_state_synchronize_rcu - Conditionally wait for an RCU grace period + * + * @oldstate: return from call to get_state_synchronize_rcu() or start_poll_synchronize_rcu() + * + * If a full RCU grace period has elapsed since the earlier call from + * which oldstate was obtained, return @true, otherwise return @false. + * If @false is returned, it is the caller's responsibilty to invoke this + * function later on until it does return @true. Alternatively, the caller + * can explicitly wait for a grace period, for example, by passing @oldstate + * to cond_synchronize_rcu() or by directly invoking synchronize_rcu(). + * + * Yes, this function does not take counter wrap into account. + * But counter wrap is harmless. If the counter wraps, we have waited for + * more than 2 billion grace periods (and way more on a 64-bit system!). + * Those needing to keep oldstate values for very long time periods + * (many hours even on 32-bit systems) should check them occasionally + * and either refresh them or set a flag indicating that the grace period + * has completed. + */ +bool poll_state_synchronize_rcu(unsigned long oldstate) +{ + if (rcu_seq_done(&rcu_state.gp_seq, oldstate)) { + smp_mb(); /* Ensure GP ends before subsequent accesses. */ + return true; + } + return false; +} +EXPORT_SYMBOL_GPL(poll_state_synchronize_rcu); + +/** * cond_synchronize_rcu - Conditionally wait for an RCU grace period * * @oldstate: return value from earlier call to get_state_synchronize_rcu() * * If a full RCU grace period has elapsed since the earlier call to - * get_state_synchronize_rcu(), just return. Otherwise, invoke - * synchronize_rcu() to wait for a full grace period. + * get_state_synchronize_rcu() or start_poll_synchronize_rcu(), just return. + * Otherwise, invoke synchronize_rcu() to wait for a full grace period. * * Yes, this function does not take counter wrap into account. But * counter wrap is harmless. If the counter wraps, we have waited for @@ -3804,10 +3887,8 @@ EXPORT_SYMBOL_GPL(get_state_synchronize_rcu); */ void cond_synchronize_rcu(unsigned long oldstate) { - if (!rcu_seq_done(&rcu_state.gp_seq, oldstate)) + if (!poll_state_synchronize_rcu(oldstate)) synchronize_rcu(); - else - smp_mb(); /* Ensure GP ends before subsequent accesses. */ } EXPORT_SYMBOL_GPL(cond_synchronize_rcu); @@ -3843,13 +3924,13 @@ static int rcu_pending(int user) return 1; /* Does this CPU have callbacks ready to invoke? */ - if (!rcu_segcblist_is_offloaded(&rdp->cblist) && + if (!rcu_rdp_is_offloaded(rdp) && rcu_segcblist_ready_cbs(&rdp->cblist)) return 1; /* Has RCU gone idle with this CPU needing another grace period? */ if (!gp_in_progress && rcu_segcblist_is_enabled(&rdp->cblist) && - !rcu_segcblist_is_offloaded(&rdp->cblist) && + !rcu_rdp_is_offloaded(rdp) && !rcu_segcblist_restempty(&rdp->cblist, RCU_NEXT_READY_TAIL)) return 1; @@ -3968,7 +4049,7 @@ void rcu_barrier(void) for_each_possible_cpu(cpu) { rdp = per_cpu_ptr(&rcu_data, cpu); if (cpu_is_offline(cpu) && - !rcu_segcblist_is_offloaded(&rdp->cblist)) + !rcu_rdp_is_offloaded(rdp)) continue; if (rcu_segcblist_n_cbs(&rdp->cblist) && cpu_online(cpu)) { rcu_barrier_trace(TPS("OnlineQ"), cpu, @@ -4083,15 +4164,13 @@ int rcutree_prepare_cpu(unsigned int cpu) rdp->dynticks_nesting = 1; /* CPU not up, no tearing. */ rcu_dynticks_eqs_online(); raw_spin_unlock_rcu_node(rnp); /* irqs remain disabled. */ + /* - * Lock in case the CB/GP kthreads are still around handling - * old callbacks (longer term we should flush all callbacks - * before completing CPU offline) + * Only non-NOCB CPUs that didn't have early-boot callbacks need to be + * (re-)initialized. */ - rcu_nocb_lock(rdp); - if (rcu_segcblist_empty(&rdp->cblist)) /* No early-boot CBs? */ + if (!rcu_segcblist_is_enabled(&rdp->cblist)) rcu_segcblist_init(&rdp->cblist); /* Re-enable callbacks. */ - rcu_nocb_unlock(rdp); /* * Add CPU to leaf rcu_node pending-online bitmask. Any needed @@ -4291,7 +4370,7 @@ void rcutree_migrate_callbacks(int cpu) struct rcu_data *rdp = per_cpu_ptr(&rcu_data, cpu); bool needwake; - if (rcu_segcblist_is_offloaded(&rdp->cblist) || + if (rcu_rdp_is_offloaded(rdp) || rcu_segcblist_empty(&rdp->cblist)) return; /* No callbacks to migrate. */ @@ -4309,7 +4388,7 @@ void rcutree_migrate_callbacks(int cpu) rcu_segcblist_disable(&rdp->cblist); WARN_ON_ONCE(rcu_segcblist_empty(&my_rdp->cblist) != !rcu_segcblist_n_cbs(&my_rdp->cblist)); - if (rcu_segcblist_is_offloaded(&my_rdp->cblist)) { + if (rcu_rdp_is_offloaded(my_rdp)) { raw_spin_unlock_rcu_node(my_rnp); /* irqs remain disabled. */ __call_rcu_nocb_wake(my_rdp, true, flags); } else { diff --git a/kernel/rcu/tree_exp.h b/kernel/rcu/tree_exp.h index 6c6ff06d4ae6..2796084ef85a 100644 --- a/kernel/rcu/tree_exp.h +++ b/kernel/rcu/tree_exp.h @@ -521,6 +521,7 @@ static void synchronize_rcu_expedited_wait(void) if (rcu_stall_is_suppressed()) continue; panic_on_rcu_stall(); + trace_rcu_stall_warning(rcu_state.name, TPS("ExpeditedStall")); pr_err("INFO: %s detected expedited stalls on CPUs/tasks: {", rcu_state.name); ndetected = 0; diff --git a/kernel/rcu/tree_plugin.h b/kernel/rcu/tree_plugin.h index 2d603771c7dc..ad0156b86937 100644 --- a/kernel/rcu/tree_plugin.h +++ b/kernel/rcu/tree_plugin.h @@ -16,8 +16,70 @@ #ifdef CONFIG_RCU_NOCB_CPU static cpumask_var_t rcu_nocb_mask; /* CPUs to have callbacks offloaded. */ static bool __read_mostly rcu_nocb_poll; /* Offload kthread are to poll. */ +static inline int rcu_lockdep_is_held_nocb(struct rcu_data *rdp) +{ + return lockdep_is_held(&rdp->nocb_lock); +} + +static inline bool rcu_current_is_nocb_kthread(struct rcu_data *rdp) +{ + /* Race on early boot between thread creation and assignment */ + if (!rdp->nocb_cb_kthread || !rdp->nocb_gp_kthread) + return true; + + if (current == rdp->nocb_cb_kthread || current == rdp->nocb_gp_kthread) + if (in_task()) + return true; + return false; +} + +static inline bool rcu_running_nocb_timer(struct rcu_data *rdp) +{ + return (timer_curr_running(&rdp->nocb_timer) && !in_irq()); +} +#else +static inline int rcu_lockdep_is_held_nocb(struct rcu_data *rdp) +{ + return 0; +} + +static inline bool rcu_current_is_nocb_kthread(struct rcu_data *rdp) +{ + return false; +} + +static inline bool rcu_running_nocb_timer(struct rcu_data *rdp) +{ + return false; +} + #endif /* #ifdef CONFIG_RCU_NOCB_CPU */ +static bool rcu_rdp_is_offloaded(struct rcu_data *rdp) +{ + /* + * In order to read the offloaded state of an rdp is a safe + * and stable way and prevent from its value to be changed + * under us, we must either hold the barrier mutex, the cpu + * hotplug lock (read or write) or the nocb lock. Local + * non-preemptible reads are also safe. NOCB kthreads and + * timers have their own means of synchronization against the + * offloaded state updaters. + */ + RCU_LOCKDEP_WARN( + !(lockdep_is_held(&rcu_state.barrier_mutex) || + (IS_ENABLED(CONFIG_HOTPLUG_CPU) && lockdep_is_cpus_held()) || + rcu_lockdep_is_held_nocb(rdp) || + (rdp == this_cpu_ptr(&rcu_data) && + !(IS_ENABLED(CONFIG_PREEMPT_COUNT) && preemptible())) || + rcu_current_is_nocb_kthread(rdp) || + rcu_running_nocb_timer(rdp)), + "Unsafe read of RCU_NOCB offloaded state" + ); + + return rcu_segcblist_is_offloaded(&rdp->cblist); +} + /* * Check the RCU kernel configuration parameters and print informative * messages about anything out of the ordinary. @@ -393,8 +455,9 @@ void __rcu_read_unlock(void) { struct task_struct *t = current; + barrier(); // critical section before exit code. if (rcu_preempt_read_exit() == 0) { - barrier(); /* critical section before exit code. */ + barrier(); // critical-section exit before .s check. if (unlikely(READ_ONCE(t->rcu_read_unlock_special.s))) rcu_read_unlock_special(t); } @@ -598,9 +661,9 @@ static void rcu_preempt_deferred_qs_handler(struct irq_work *iwp) static void rcu_read_unlock_special(struct task_struct *t) { unsigned long flags; + bool irqs_were_disabled; bool preempt_bh_were_disabled = !!(preempt_count() & (PREEMPT_MASK | SOFTIRQ_MASK)); - bool irqs_were_disabled; /* NMI handlers cannot block and cannot safely manipulate state. */ if (in_nmi()) @@ -609,30 +672,33 @@ static void rcu_read_unlock_special(struct task_struct *t) local_irq_save(flags); irqs_were_disabled = irqs_disabled_flags(flags); if (preempt_bh_were_disabled || irqs_were_disabled) { - bool exp; + bool expboost; // Expedited GP in flight or possible boosting. struct rcu_data *rdp = this_cpu_ptr(&rcu_data); struct rcu_node *rnp = rdp->mynode; - exp = (t->rcu_blocked_node && - READ_ONCE(t->rcu_blocked_node->exp_tasks)) || - (rdp->grpmask & READ_ONCE(rnp->expmask)); + expboost = (t->rcu_blocked_node && READ_ONCE(t->rcu_blocked_node->exp_tasks)) || + (rdp->grpmask & READ_ONCE(rnp->expmask)) || + IS_ENABLED(CONFIG_RCU_STRICT_GRACE_PERIOD) || + (IS_ENABLED(CONFIG_RCU_BOOST) && irqs_were_disabled && + t->rcu_blocked_node); // Need to defer quiescent state until everything is enabled. - if (use_softirq && (in_irq() || (exp && !irqs_were_disabled))) { + if (use_softirq && (in_irq() || (expboost && !irqs_were_disabled))) { // Using softirq, safe to awaken, and either the - // wakeup is free or there is an expedited GP. + // wakeup is free or there is either an expedited + // GP in flight or a potential need to deboost. raise_softirq_irqoff(RCU_SOFTIRQ); } else { // Enabling BH or preempt does reschedule, so... - // Also if no expediting, slow is OK. - // Plus nohz_full CPUs eventually get tick enabled. + // Also if no expediting and no possible deboosting, + // slow is OK. Plus nohz_full CPUs eventually get + // tick enabled. set_tsk_need_resched(current); set_preempt_need_resched(); if (IS_ENABLED(CONFIG_IRQ_WORK) && irqs_were_disabled && - !rdp->defer_qs_iw_pending && exp && cpu_online(rdp->cpu)) { + expboost && !rdp->defer_qs_iw_pending && cpu_online(rdp->cpu)) { // Get scheduler to re-evaluate and call hooks. // If !IRQ_WORK, FQS scan will eventually IPI. - init_irq_work(&rdp->defer_qs_iw, - rcu_preempt_deferred_qs_handler); + init_irq_work(&rdp->defer_qs_iw, rcu_preempt_deferred_qs_handler); rdp->defer_qs_iw_pending = true; irq_work_queue_on(&rdp->defer_qs_iw, rdp->cpu); } @@ -1257,7 +1323,7 @@ int rcu_needs_cpu(u64 basemono, u64 *nextevt) { *nextevt = KTIME_MAX; return !rcu_segcblist_empty(&this_cpu_ptr(&rcu_data)->cblist) && - !rcu_segcblist_is_offloaded(&this_cpu_ptr(&rcu_data)->cblist); + !rcu_rdp_is_offloaded(this_cpu_ptr(&rcu_data)); } /* @@ -1352,7 +1418,7 @@ int rcu_needs_cpu(u64 basemono, u64 *nextevt) /* If no non-offloaded callbacks, RCU doesn't need the CPU. */ if (rcu_segcblist_empty(&rdp->cblist) || - rcu_segcblist_is_offloaded(&this_cpu_ptr(&rcu_data)->cblist)) { + rcu_rdp_is_offloaded(rdp)) { *nextevt = KTIME_MAX; return 0; } @@ -1388,7 +1454,7 @@ static void rcu_prepare_for_idle(void) int tne; lockdep_assert_irqs_disabled(); - if (rcu_segcblist_is_offloaded(&rdp->cblist)) + if (rcu_rdp_is_offloaded(rdp)) return; /* Handle nohz enablement switches conservatively. */ @@ -1429,7 +1495,7 @@ static void rcu_cleanup_after_idle(void) struct rcu_data *rdp = this_cpu_ptr(&rcu_data); lockdep_assert_irqs_disabled(); - if (rcu_segcblist_is_offloaded(&rdp->cblist)) + if (rcu_rdp_is_offloaded(rdp)) return; if (rcu_try_advance_all_cbs()) invoke_rcu_core(); @@ -1464,14 +1530,12 @@ static void rcu_cleanup_after_idle(void) /* * Parse the boot-time rcu_nocb_mask CPU list from the kernel parameters. - * The string after the "rcu_nocbs=" is either "all" for all CPUs, or a - * comma-separated list of CPUs and/or CPU ranges. If an invalid list is - * given, a warning is emitted and all CPUs are offloaded. + * If the list is invalid, a warning is emitted and all CPUs are offloaded. */ static int __init rcu_nocb_setup(char *str) { alloc_bootmem_cpumask_var(&rcu_nocb_mask); - if (!strcasecmp(str, "all")) + if (!strcasecmp(str, "all")) /* legacy: use "0-N" instead */ cpumask_setall(rcu_nocb_mask); else if (cpulist_parse(str, rcu_nocb_mask)) { @@ -1494,7 +1558,7 @@ early_param("rcu_nocb_poll", parse_rcu_nocb_poll); * After all, the main point of bypassing is to avoid lock contention * on ->nocb_lock, which only can happen at high call_rcu() rates. */ -int nocb_nobypass_lim_per_jiffy = 16 * 1000 / HZ; +static int nocb_nobypass_lim_per_jiffy = 16 * 1000 / HZ; module_param(nocb_nobypass_lim_per_jiffy, int, 0); /* @@ -1560,7 +1624,7 @@ static void rcu_nocb_bypass_unlock(struct rcu_data *rdp) static void rcu_nocb_lock(struct rcu_data *rdp) { lockdep_assert_irqs_disabled(); - if (!rcu_segcblist_is_offloaded(&rdp->cblist)) + if (!rcu_rdp_is_offloaded(rdp)) return; raw_spin_lock(&rdp->nocb_lock); } @@ -1571,7 +1635,7 @@ static void rcu_nocb_lock(struct rcu_data *rdp) */ static void rcu_nocb_unlock(struct rcu_data *rdp) { - if (rcu_segcblist_is_offloaded(&rdp->cblist)) { + if (rcu_rdp_is_offloaded(rdp)) { lockdep_assert_irqs_disabled(); raw_spin_unlock(&rdp->nocb_lock); } @@ -1584,7 +1648,7 @@ static void rcu_nocb_unlock(struct rcu_data *rdp) static void rcu_nocb_unlock_irqrestore(struct rcu_data *rdp, unsigned long flags) { - if (rcu_segcblist_is_offloaded(&rdp->cblist)) { + if (rcu_rdp_is_offloaded(rdp)) { lockdep_assert_irqs_disabled(); raw_spin_unlock_irqrestore(&rdp->nocb_lock, flags); } else { @@ -1596,7 +1660,7 @@ static void rcu_nocb_unlock_irqrestore(struct rcu_data *rdp, static void rcu_lockdep_assert_cblist_protected(struct rcu_data *rdp) { lockdep_assert_irqs_disabled(); - if (rcu_segcblist_is_offloaded(&rdp->cblist)) + if (rcu_rdp_is_offloaded(rdp)) lockdep_assert_held(&rdp->nocb_lock); } @@ -1641,12 +1705,16 @@ static bool wake_nocb_gp(struct rcu_data *rdp, bool force, lockdep_assert_held(&rdp->nocb_lock); if (!READ_ONCE(rdp_gp->nocb_gp_kthread)) { + rcu_nocb_unlock_irqrestore(rdp, flags); trace_rcu_nocb_wake(rcu_state.name, rdp->cpu, TPS("AlreadyAwake")); - rcu_nocb_unlock_irqrestore(rdp, flags); return false; } - del_timer(&rdp->nocb_timer); + + if (READ_ONCE(rdp->nocb_defer_wakeup) > RCU_NOCB_WAKE_NOT) { + WRITE_ONCE(rdp->nocb_defer_wakeup, RCU_NOCB_WAKE_NOT); + del_timer(&rdp->nocb_timer); + } rcu_nocb_unlock_irqrestore(rdp, flags); raw_spin_lock_irqsave(&rdp_gp->nocb_gp_lock, flags); if (force || READ_ONCE(rdp_gp->nocb_gp_sleep)) { @@ -1690,7 +1758,7 @@ static bool rcu_nocb_do_flush_bypass(struct rcu_data *rdp, struct rcu_head *rhp, { struct rcu_cblist rcl; - WARN_ON_ONCE(!rcu_segcblist_is_offloaded(&rdp->cblist)); + WARN_ON_ONCE(!rcu_rdp_is_offloaded(rdp)); rcu_lockdep_assert_cblist_protected(rdp); lockdep_assert_held(&rdp->nocb_bypass_lock); if (rhp && !rcu_cblist_n_cbs(&rdp->nocb_bypass)) { @@ -1718,7 +1786,7 @@ static bool rcu_nocb_do_flush_bypass(struct rcu_data *rdp, struct rcu_head *rhp, static bool rcu_nocb_flush_bypass(struct rcu_data *rdp, struct rcu_head *rhp, unsigned long j) { - if (!rcu_segcblist_is_offloaded(&rdp->cblist)) + if (!rcu_rdp_is_offloaded(rdp)) return true; rcu_lockdep_assert_cblist_protected(rdp); rcu_nocb_bypass_lock(rdp); @@ -1732,7 +1800,7 @@ static bool rcu_nocb_flush_bypass(struct rcu_data *rdp, struct rcu_head *rhp, static void rcu_nocb_try_flush_bypass(struct rcu_data *rdp, unsigned long j) { rcu_lockdep_assert_cblist_protected(rdp); - if (!rcu_segcblist_is_offloaded(&rdp->cblist) || + if (!rcu_rdp_is_offloaded(rdp) || !rcu_nocb_bypass_trylock(rdp)) return; WARN_ON_ONCE(!rcu_nocb_do_flush_bypass(rdp, NULL, j)); @@ -1764,11 +1832,22 @@ static bool rcu_nocb_try_bypass(struct rcu_data *rdp, struct rcu_head *rhp, unsigned long j = jiffies; long ncbs = rcu_cblist_n_cbs(&rdp->nocb_bypass); - if (!rcu_segcblist_is_offloaded(&rdp->cblist)) { + lockdep_assert_irqs_disabled(); + + // Pure softirq/rcuc based processing: no bypassing, no + // locking. + if (!rcu_rdp_is_offloaded(rdp)) { + *was_alldone = !rcu_segcblist_pend_cbs(&rdp->cblist); + return false; + } + + // In the process of (de-)offloading: no bypassing, but + // locking. + if (!rcu_segcblist_completely_offloaded(&rdp->cblist)) { + rcu_nocb_lock(rdp); *was_alldone = !rcu_segcblist_pend_cbs(&rdp->cblist); return false; /* Not offloaded, no bypassing. */ } - lockdep_assert_irqs_disabled(); // Don't use ->nocb_bypass during early boot. if (rcu_scheduler_active != RCU_SCHEDULER_RUNNING) { @@ -1878,9 +1957,9 @@ static void __call_rcu_nocb_wake(struct rcu_data *rdp, bool was_alldone, // If we are being polled or there is no kthread, just leave. t = READ_ONCE(rdp->nocb_gp_kthread); if (rcu_nocb_poll || !t) { + rcu_nocb_unlock_irqrestore(rdp, flags); trace_rcu_nocb_wake(rcu_state.name, rdp->cpu, TPS("WakeNotPoll")); - rcu_nocb_unlock_irqrestore(rdp, flags); return; } // Need to actually to a wakeup. @@ -1915,8 +1994,8 @@ static void __call_rcu_nocb_wake(struct rcu_data *rdp, bool was_alldone, TPS("WakeOvfIsDeferred")); rcu_nocb_unlock_irqrestore(rdp, flags); } else { - trace_rcu_nocb_wake(rcu_state.name, rdp->cpu, TPS("WakeNot")); rcu_nocb_unlock_irqrestore(rdp, flags); + trace_rcu_nocb_wake(rcu_state.name, rdp->cpu, TPS("WakeNot")); } return; } @@ -1954,7 +2033,8 @@ static inline bool nocb_gp_enabled_cb(struct rcu_data *rdp) return rcu_segcblist_test_flags(&rdp->cblist, flags); } -static inline bool nocb_gp_update_state(struct rcu_data *rdp, bool *needwake_state) +static inline bool nocb_gp_update_state_deoffloading(struct rcu_data *rdp, + bool *needwake_state) { struct rcu_segcblist *cblist = &rdp->cblist; @@ -1964,7 +2044,7 @@ static inline bool nocb_gp_update_state(struct rcu_data *rdp, bool *needwake_sta if (rcu_segcblist_test_flags(cblist, SEGCBLIST_KTHREAD_CB)) *needwake_state = true; } - return true; + return false; } /* @@ -1975,7 +2055,7 @@ static inline bool nocb_gp_update_state(struct rcu_data *rdp, bool *needwake_sta rcu_segcblist_clear_flags(cblist, SEGCBLIST_KTHREAD_GP); if (!rcu_segcblist_test_flags(cblist, SEGCBLIST_KTHREAD_CB)) *needwake_state = true; - return false; + return true; } @@ -2013,7 +2093,7 @@ static void nocb_gp_wait(struct rcu_data *my_rdp) continue; trace_rcu_nocb_wake(rcu_state.name, rdp->cpu, TPS("Check")); rcu_nocb_lock_irqsave(rdp, flags); - if (!nocb_gp_update_state(rdp, &needwake_state)) { + if (nocb_gp_update_state_deoffloading(rdp, &needwake_state)) { rcu_nocb_unlock_irqrestore(rdp, flags); if (needwake_state) swake_up_one(&rdp->nocb_state_wq); @@ -2168,11 +2248,18 @@ static void nocb_cb_wait(struct rcu_data *rdp) unsigned long flags; bool needwake_state = false; bool needwake_gp = false; + bool can_sleep = true; struct rcu_node *rnp = rdp->mynode; local_irq_save(flags); rcu_momentary_dyntick_idle(); local_irq_restore(flags); + /* + * Disable BH to provide the expected environment. Also, when + * transitioning to/from NOCB mode, a self-requeuing callback might + * be invoked from softirq. A short grace period could cause both + * instances of this callback would execute concurrently. + */ local_bh_disable(); rcu_do_batch(rdp); local_bh_enable(); @@ -2185,8 +2272,6 @@ static void nocb_cb_wait(struct rcu_data *rdp) raw_spin_unlock_rcu_node(rnp); /* irqs remain disabled. */ } - WRITE_ONCE(rdp->nocb_cb_sleep, true); - if (rcu_segcblist_test_flags(cblist, SEGCBLIST_OFFLOADED)) { if (!rcu_segcblist_test_flags(cblist, SEGCBLIST_KTHREAD_CB)) { rcu_segcblist_set_flags(cblist, SEGCBLIST_KTHREAD_CB); @@ -2194,7 +2279,7 @@ static void nocb_cb_wait(struct rcu_data *rdp) needwake_state = true; } if (rcu_segcblist_ready_cbs(cblist)) - WRITE_ONCE(rdp->nocb_cb_sleep, false); + can_sleep = false; } else { /* * De-offloading. Clear our flag and notify the de-offload worker. @@ -2207,6 +2292,8 @@ static void nocb_cb_wait(struct rcu_data *rdp) needwake_state = true; } + WRITE_ONCE(rdp->nocb_cb_sleep, can_sleep); + if (rdp->nocb_cb_sleep) trace_rcu_nocb_wake(rcu_state.name, rdp->cpu, TPS("CBSleep")); @@ -2265,7 +2352,6 @@ static bool do_nocb_deferred_wakeup_common(struct rcu_data *rdp) return false; } ndw = READ_ONCE(rdp->nocb_defer_wakeup); - WRITE_ONCE(rdp->nocb_defer_wakeup, RCU_NOCB_WAKE_NOT); ret = wake_nocb_gp(rdp, ndw == RCU_NOCB_WAKE_FORCE, flags); trace_rcu_nocb_wake(rcu_state.name, rdp->cpu, TPS("DeferredWake")); @@ -2331,24 +2417,28 @@ static int rdp_offload_toggle(struct rcu_data *rdp, return 0; } -static int __rcu_nocb_rdp_deoffload(struct rcu_data *rdp) +static long rcu_nocb_rdp_deoffload(void *arg) { + struct rcu_data *rdp = arg; struct rcu_segcblist *cblist = &rdp->cblist; unsigned long flags; int ret; + WARN_ON_ONCE(rdp->cpu != raw_smp_processor_id()); + pr_info("De-offloading %d\n", rdp->cpu); rcu_nocb_lock_irqsave(rdp, flags); /* - * If there are still pending work offloaded, the offline - * CPU won't help much handling them. + * Flush once and for all now. This suffices because we are + * running on the target CPU holding ->nocb_lock (thus having + * interrupts disabled), and because rdp_offload_toggle() + * invokes rcu_segcblist_offload(), which clears SEGCBLIST_OFFLOADED. + * Thus future calls to rcu_segcblist_completely_offloaded() will + * return false, which means that future calls to rcu_nocb_try_bypass() + * will refuse to put anything into the bypass. */ - if (cpu_is_offline(rdp->cpu) && !rcu_segcblist_empty(&rdp->cblist)) { - rcu_nocb_unlock_irqrestore(rdp, flags); - return -EBUSY; - } - + WARN_ON_ONCE(!rcu_nocb_flush_bypass(rdp, NULL, jiffies)); ret = rdp_offload_toggle(rdp, false, flags); swait_event_exclusive(rdp->nocb_state_wq, !rcu_segcblist_test_flags(cblist, SEGCBLIST_KTHREAD_CB | @@ -2360,30 +2450,22 @@ static int __rcu_nocb_rdp_deoffload(struct rcu_data *rdp) del_timer_sync(&rdp->nocb_timer); /* - * Flush bypass. While IRQs are disabled and once we set - * SEGCBLIST_SOFTIRQ_ONLY, no callback is supposed to be - * enqueued on bypass. + * Theoretically we could set SEGCBLIST_SOFTIRQ_ONLY with CB unlocked + * and IRQs disabled but let's be paranoid. */ rcu_nocb_lock_irqsave(rdp, flags); - rcu_nocb_flush_bypass(rdp, NULL, jiffies); rcu_segcblist_set_flags(cblist, SEGCBLIST_SOFTIRQ_ONLY); /* * With SEGCBLIST_SOFTIRQ_ONLY, we can't use - * rcu_nocb_unlock_irqrestore() anymore. Theoretically we - * could set SEGCBLIST_SOFTIRQ_ONLY with cb unlocked and IRQs - * disabled now, but let's be paranoid. + * rcu_nocb_unlock_irqrestore() anymore. */ raw_spin_unlock_irqrestore(&rdp->nocb_lock, flags); - return ret; -} + /* Sanity check */ + WARN_ON_ONCE(rcu_cblist_n_cbs(&rdp->nocb_bypass)); -static long rcu_nocb_rdp_deoffload(void *arg) -{ - struct rcu_data *rdp = arg; - WARN_ON_ONCE(rdp->cpu != raw_smp_processor_id()); - return __rcu_nocb_rdp_deoffload(rdp); + return ret; } int rcu_nocb_cpu_deoffload(int cpu) @@ -2397,13 +2479,15 @@ int rcu_nocb_cpu_deoffload(int cpu) } mutex_lock(&rcu_state.barrier_mutex); cpus_read_lock(); - if (rcu_segcblist_is_offloaded(&rdp->cblist)) { - if (cpu_online(cpu)) + if (rcu_rdp_is_offloaded(rdp)) { + if (cpu_online(cpu)) { ret = work_on_cpu(cpu, rcu_nocb_rdp_deoffload, rdp); - else - ret = __rcu_nocb_rdp_deoffload(rdp); - if (!ret) - cpumask_clear_cpu(cpu, rcu_nocb_mask); + if (!ret) + cpumask_clear_cpu(cpu, rcu_nocb_mask); + } else { + pr_info("NOCB: Can't CB-deoffload an offline CPU\n"); + ret = -EINVAL; + } } cpus_read_unlock(); mutex_unlock(&rcu_state.barrier_mutex); @@ -2412,12 +2496,14 @@ int rcu_nocb_cpu_deoffload(int cpu) } EXPORT_SYMBOL_GPL(rcu_nocb_cpu_deoffload); -static int __rcu_nocb_rdp_offload(struct rcu_data *rdp) +static long rcu_nocb_rdp_offload(void *arg) { + struct rcu_data *rdp = arg; struct rcu_segcblist *cblist = &rdp->cblist; unsigned long flags; int ret; + WARN_ON_ONCE(rdp->cpu != raw_smp_processor_id()); /* * For now we only support re-offload, ie: the rdp must have been * offloaded on boot first. @@ -2457,14 +2543,6 @@ static int __rcu_nocb_rdp_offload(struct rcu_data *rdp) return ret; } -static long rcu_nocb_rdp_offload(void *arg) -{ - struct rcu_data *rdp = arg; - - WARN_ON_ONCE(rdp->cpu != raw_smp_processor_id()); - return __rcu_nocb_rdp_offload(rdp); -} - int rcu_nocb_cpu_offload(int cpu) { struct rcu_data *rdp = per_cpu_ptr(&rcu_data, cpu); @@ -2472,13 +2550,15 @@ int rcu_nocb_cpu_offload(int cpu) mutex_lock(&rcu_state.barrier_mutex); cpus_read_lock(); - if (!rcu_segcblist_is_offloaded(&rdp->cblist)) { - if (cpu_online(cpu)) + if (!rcu_rdp_is_offloaded(rdp)) { + if (cpu_online(cpu)) { ret = work_on_cpu(cpu, rcu_nocb_rdp_offload, rdp); - else - ret = __rcu_nocb_rdp_offload(rdp); - if (!ret) - cpumask_set_cpu(cpu, rcu_nocb_mask); + if (!ret) + cpumask_set_cpu(cpu, rcu_nocb_mask); + } else { + pr_info("NOCB: Can't CB-offload an offline CPU\n"); + ret = -EINVAL; + } } cpus_read_unlock(); mutex_unlock(&rcu_state.barrier_mutex); diff --git a/kernel/rcu/tree_stall.h b/kernel/rcu/tree_stall.h index 475b26171b20..59b95cc5cbdf 100644 --- a/kernel/rcu/tree_stall.h +++ b/kernel/rcu/tree_stall.h @@ -536,6 +536,7 @@ static void print_other_cpu_stall(unsigned long gp_seq, unsigned long gps) * See Documentation/RCU/stallwarn.rst for info on how to debug * RCU CPU stall warnings. */ + trace_rcu_stall_warning(rcu_state.name, TPS("StallDetected")); pr_err("INFO: %s detected stalls on CPUs/tasks:\n", rcu_state.name); rcu_for_each_leaf_node(rnp) { raw_spin_lock_irqsave_rcu_node(rnp, flags); @@ -606,6 +607,7 @@ static void print_cpu_stall(unsigned long gps) * See Documentation/RCU/stallwarn.rst for info on how to debug * RCU CPU stall warnings. */ + trace_rcu_stall_warning(rcu_state.name, TPS("SelfDetected")); pr_err("INFO: %s self-detected stall on CPU\n", rcu_state.name); raw_spin_lock_irqsave_rcu_node(rdp->mynode, flags); print_cpu_stall_info(smp_processor_id()); diff --git a/kernel/softirq.c b/kernel/softirq.c index 5a99696da86a..4992853ef53d 100644 --- a/kernel/softirq.c +++ b/kernel/softirq.c @@ -423,7 +423,7 @@ static inline void invoke_softirq(void) if (ksoftirqd_running(local_softirq_pending())) return; - if (!force_irqthreads) { + if (!force_irqthreads || !__this_cpu_read(ksoftirqd)) { #ifdef CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK /* * We can safely execute softirq on the current stack if diff --git a/kernel/torture.c b/kernel/torture.c index 01e336f1e5b2..0a315c387bed 100644 --- a/kernel/torture.c +++ b/kernel/torture.c @@ -816,9 +816,9 @@ bool torture_init_begin(char *ttype, int v) { mutex_lock(&fullstop_mutex); if (torture_type != NULL) { - pr_alert("torture_init_begin: Refusing %s init: %s running.\n", - ttype, torture_type); - pr_alert("torture_init_begin: One torture test at a time!\n"); + pr_alert("%s: Refusing %s init: %s running.\n", + __func__, ttype, torture_type); + pr_alert("%s: One torture test at a time!\n", __func__); mutex_unlock(&fullstop_mutex); return false; } diff --git a/lib/bitmap.c b/lib/bitmap.c index 75006c4036e9..9f4626a4c95f 100644 --- a/lib/bitmap.c +++ b/lib/bitmap.c @@ -487,30 +487,25 @@ EXPORT_SYMBOL(bitmap_print_to_pagebuf); /* * Region 9-38:4/10 describes the following bitmap structure: - * 0 9 12 18 38 - * .........****......****......****...... - * ^ ^ ^ ^ - * start off group_len end + * 0 9 12 18 38 N + * .........****......****......****.................. + * ^ ^ ^ ^ ^ + * start off group_len end nbits */ struct region { unsigned int start; unsigned int off; unsigned int group_len; unsigned int end; + unsigned int nbits; }; -static int bitmap_set_region(const struct region *r, - unsigned long *bitmap, int nbits) +static void bitmap_set_region(const struct region *r, unsigned long *bitmap) { unsigned int start; - if (r->end >= nbits) - return -ERANGE; - for (start = r->start; start <= r->end; start += r->group_len) bitmap_set(bitmap, start, min(r->end - start + 1, r->off)); - - return 0; } static int bitmap_check_region(const struct region *r) @@ -518,14 +513,23 @@ static int bitmap_check_region(const struct region *r) if (r->start > r->end || r->group_len == 0 || r->off > r->group_len) return -EINVAL; + if (r->end >= r->nbits) + return -ERANGE; + return 0; } -static const char *bitmap_getnum(const char *str, unsigned int *num) +static const char *bitmap_getnum(const char *str, unsigned int *num, + unsigned int lastbit) { unsigned long long n; unsigned int len; + if (str[0] == 'N') { + *num = lastbit; + return str + 1; + } + len = _parse_integer(str, 10, &n); if (!len) return ERR_PTR(-EINVAL); @@ -573,7 +577,9 @@ static const char *bitmap_find_region_reverse(const char *start, const char *end static const char *bitmap_parse_region(const char *str, struct region *r) { - str = bitmap_getnum(str, &r->start); + unsigned int lastbit = r->nbits - 1; + + str = bitmap_getnum(str, &r->start, lastbit); if (IS_ERR(str)) return str; @@ -583,7 +589,7 @@ static const char *bitmap_parse_region(const char *str, struct region *r) if (*str != '-') return ERR_PTR(-EINVAL); - str = bitmap_getnum(str + 1, &r->end); + str = bitmap_getnum(str + 1, &r->end, lastbit); if (IS_ERR(str)) return str; @@ -593,14 +599,14 @@ static const char *bitmap_parse_region(const char *str, struct region *r) if (*str != ':') return ERR_PTR(-EINVAL); - str = bitmap_getnum(str + 1, &r->off); + str = bitmap_getnum(str + 1, &r->off, lastbit); if (IS_ERR(str)) return str; if (*str != '/') return ERR_PTR(-EINVAL); - return bitmap_getnum(str + 1, &r->group_len); + return bitmap_getnum(str + 1, &r->group_len, lastbit); no_end: r->end = r->start; @@ -627,6 +633,10 @@ no_pattern: * From each group will be used only defined amount of bits. * Syntax: range:used_size/group_size * Example: 0-1023:2/256 ==> 0,1,256,257,512,513,768,769 + * The value 'N' can be used as a dynamically substituted token for the + * maximum allowed value; i.e (nmaskbits - 1). Keep in mind that it is + * dynamic, so if system changes cause the bitmap width to change, such + * as more cores in a CPU list, then any ranges using N will also change. * * Returns: 0 on success, -errno on invalid input strings. Error values: * @@ -640,7 +650,8 @@ int bitmap_parselist(const char *buf, unsigned long *maskp, int nmaskbits) struct region r; long ret; - bitmap_zero(maskp, nmaskbits); + r.nbits = nmaskbits; + bitmap_zero(maskp, r.nbits); while (buf) { buf = bitmap_find_region(buf); @@ -655,9 +666,7 @@ int bitmap_parselist(const char *buf, unsigned long *maskp, int nmaskbits) if (ret) return ret; - ret = bitmap_set_region(&r, maskp, nmaskbits); - if (ret) - return ret; + bitmap_set_region(&r, maskp); } return 0; diff --git a/lib/test_bitmap.c b/lib/test_bitmap.c index 0ea0e8258f14..9cd575583180 100644 --- a/lib/test_bitmap.c +++ b/lib/test_bitmap.c @@ -34,6 +34,8 @@ static const unsigned long exp1[] __initconst = { BITMAP_FROM_U64(0x3333333311111111ULL), BITMAP_FROM_U64(0xffffffff77777777ULL), BITMAP_FROM_U64(0), + BITMAP_FROM_U64(0x00008000), + BITMAP_FROM_U64(0x80000000), }; static const unsigned long exp2[] __initconst = { @@ -334,15 +336,47 @@ static const struct test_bitmap_parselist parselist_tests[] __initconst = { {0, " , ,, , , ", &exp1[12 * step], 8, 0}, {0, " , ,, , , \n", &exp1[12 * step], 8, 0}, + {0, "0-0", &exp1[0], 32, 0}, + {0, "1-1", &exp1[1 * step], 32, 0}, + {0, "15-15", &exp1[13 * step], 32, 0}, + {0, "31-31", &exp1[14 * step], 32, 0}, + + {0, "0-0:0/1", &exp1[12 * step], 32, 0}, + {0, "0-0:1/1", &exp1[0], 32, 0}, + {0, "0-0:1/31", &exp1[0], 32, 0}, + {0, "0-0:31/31", &exp1[0], 32, 0}, + {0, "1-1:1/1", &exp1[1 * step], 32, 0}, + {0, "0-15:16/31", &exp1[2 * step], 32, 0}, + {0, "15-15:1/2", &exp1[13 * step], 32, 0}, + {0, "15-15:31/31", &exp1[13 * step], 32, 0}, + {0, "15-31:1/31", &exp1[13 * step], 32, 0}, + {0, "16-31:16/31", &exp1[3 * step], 32, 0}, + {0, "31-31:31/31", &exp1[14 * step], 32, 0}, + + {0, "N-N", &exp1[14 * step], 32, 0}, + {0, "0-0:1/N", &exp1[0], 32, 0}, + {0, "0-0:N/N", &exp1[0], 32, 0}, + {0, "0-15:16/N", &exp1[2 * step], 32, 0}, + {0, "15-15:N/N", &exp1[13 * step], 32, 0}, + {0, "15-N:1/N", &exp1[13 * step], 32, 0}, + {0, "16-N:16/N", &exp1[3 * step], 32, 0}, + {0, "N-N:N/N", &exp1[14 * step], 32, 0}, + + {0, "0-N:1/3,1-N:1/3,2-N:1/3", &exp1[8 * step], 32, 0}, + {0, "0-31:1/3,1-31:1/3,2-31:1/3", &exp1[8 * step], 32, 0}, + {0, "1-10:8/12,8-31:24/29,0-31:0/3", &exp1[9 * step], 32, 0}, + {-EINVAL, "-1", NULL, 8, 0}, {-EINVAL, "-0", NULL, 8, 0}, {-EINVAL, "10-1", NULL, 8, 0}, - {-EINVAL, "0-31:", NULL, 8, 0}, - {-EINVAL, "0-31:0", NULL, 8, 0}, - {-EINVAL, "0-31:0/", NULL, 8, 0}, - {-EINVAL, "0-31:0/0", NULL, 8, 0}, - {-EINVAL, "0-31:1/0", NULL, 8, 0}, - {-EINVAL, "0-31:10/1", NULL, 8, 0}, + {-ERANGE, "8-8", NULL, 8, 0}, + {-ERANGE, "0-31", NULL, 8, 0}, + {-EINVAL, "0-31:", NULL, 32, 0}, + {-EINVAL, "0-31:0", NULL, 32, 0}, + {-EINVAL, "0-31:0/", NULL, 32, 0}, + {-EINVAL, "0-31:0/0", NULL, 32, 0}, + {-EINVAL, "0-31:1/0", NULL, 32, 0}, + {-EINVAL, "0-31:10/1", NULL, 32, 0}, {-EOVERFLOW, "0-98765432123456789:10/1", NULL, 8, 0}, {-EINVAL, "a-31", NULL, 8, 0}, diff --git a/mm/slab.c b/mm/slab.c index ae651bf540b7..4e212cda8693 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -3651,6 +3651,7 @@ void *__kmalloc_node_track_caller(size_t size, gfp_t flags, EXPORT_SYMBOL(__kmalloc_node_track_caller); #endif /* CONFIG_NUMA */ +#ifdef CONFIG_PRINTK void kmem_obj_info(struct kmem_obj_info *kpp, void *object, struct page *page) { struct kmem_cache *cachep; @@ -3670,6 +3671,7 @@ void kmem_obj_info(struct kmem_obj_info *kpp, void *object, struct page *page) if (DEBUG && cachep->flags & SLAB_STORE_USER) kpp->kp_ret = *dbg_userword(cachep, objp); } +#endif /** * __do_kmalloc - allocate memory diff --git a/mm/slab.h b/mm/slab.h index 774c7221efdc..c30ed35b3d5d 100644 --- a/mm/slab.h +++ b/mm/slab.h @@ -621,6 +621,7 @@ static inline bool slab_want_init_on_free(struct kmem_cache *c) return false; } +#ifdef CONFIG_PRINTK #define KS_ADDRS_COUNT 16 struct kmem_obj_info { void *kp_ptr; @@ -632,5 +633,6 @@ struct kmem_obj_info { void *kp_stack[KS_ADDRS_COUNT]; }; void kmem_obj_info(struct kmem_obj_info *kpp, void *object, struct page *page); +#endif #endif /* MM_SLAB_H */ diff --git a/mm/slab_common.c b/mm/slab_common.c index 88e833986332..4c6107e39f9a 100644 --- a/mm/slab_common.c +++ b/mm/slab_common.c @@ -526,6 +526,7 @@ bool slab_is_available(void) return slab_state >= UP; } +#ifdef CONFIG_PRINTK /** * kmem_valid_obj - does the pointer reference a valid slab object? * @object: pointer to query. @@ -544,6 +545,7 @@ bool kmem_valid_obj(void *object) page = virt_to_head_page(object); return PageSlab(page); } +EXPORT_SYMBOL_GPL(kmem_valid_obj); /** * kmem_dump_obj - Print available slab provenance information @@ -600,6 +602,8 @@ void kmem_dump_obj(void *object) pr_info(" %pS\n", kp.kp_stack[i]); } } +EXPORT_SYMBOL_GPL(kmem_dump_obj); +#endif #ifndef CONFIG_SLOB /* Create a cache during boot when no slab services are available yet */ diff --git a/mm/slob.c b/mm/slob.c index 0578429b991b..74d3f6e60666 100644 --- a/mm/slob.c +++ b/mm/slob.c @@ -461,11 +461,13 @@ out: spin_unlock_irqrestore(&slob_lock, flags); } +#ifdef CONFIG_PRINTK void kmem_obj_info(struct kmem_obj_info *kpp, void *object, struct page *page) { kpp->kp_ptr = object; kpp->kp_page = page; } +#endif /* * End of slob allocator proper. Begin kmem_cache_alloc and kmalloc frontend. diff --git a/mm/slub.c b/mm/slub.c index 7ed388077633..722f95e1ea0b 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -3964,6 +3964,7 @@ int __kmem_cache_shutdown(struct kmem_cache *s) return 0; } +#ifdef CONFIG_PRINTK void kmem_obj_info(struct kmem_obj_info *kpp, void *object, struct page *page) { void *base; @@ -4003,6 +4004,7 @@ void kmem_obj_info(struct kmem_obj_info *kpp, void *object, struct page *page) #endif #endif } +#endif /******************************************************************** * Kmalloc subsystem diff --git a/mm/util.c b/mm/util.c index 54870226cea6..c37e24d5fa43 100644 --- a/mm/util.c +++ b/mm/util.c @@ -983,6 +983,7 @@ int __weak memcmp_pages(struct page *page1, struct page *page2) return ret; } +#ifdef CONFIG_PRINTK /** * mem_dump_obj - Print available provenance information * @object: object for which to find provenance information. @@ -1013,3 +1014,5 @@ void mem_dump_obj(void *object) } pr_cont(" non-slab/vmalloc memory.\n"); } +EXPORT_SYMBOL_GPL(mem_dump_obj); +#endif diff --git a/mm/vmalloc.c b/mm/vmalloc.c index 4f5f8c907897..d5f2a84e488a 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -3450,6 +3450,7 @@ void pcpu_free_vm_areas(struct vm_struct **vms, int nr_vms) } #endif /* CONFIG_SMP */ +#ifdef CONFIG_PRINTK bool vmalloc_dump_obj(void *object) { struct vm_struct *vm; @@ -3462,6 +3463,7 @@ bool vmalloc_dump_obj(void *object) vm->nr_pages, (unsigned long)vm->addr, vm->caller); return true; } +#endif #ifdef CONFIG_PROC_FS static void *s_start(struct seq_file *m, loff_t *pos) diff --git a/tools/testing/selftests/rcutorture/bin/cpus2use.sh b/tools/testing/selftests/rcutorture/bin/cpus2use.sh index 1dbfb62567d2..6bb993001680 100755 --- a/tools/testing/selftests/rcutorture/bin/cpus2use.sh +++ b/tools/testing/selftests/rcutorture/bin/cpus2use.sh @@ -21,7 +21,6 @@ then awk -v ncpus=$ncpus '{ print ncpus * ($7 + $NF) / 100 }'` else # No mpstat command, so use all available CPUs. - echo The mpstat command is not available, so greedily using all CPUs. idlecpus=$ncpus fi awk -v ncpus=$ncpus -v idlecpus=$idlecpus < /dev/null ' diff --git a/tools/testing/selftests/rcutorture/bin/jitter.sh b/tools/testing/selftests/rcutorture/bin/jitter.sh index 188b864bc4bf..15d937ba96ca 100755 --- a/tools/testing/selftests/rcutorture/bin/jitter.sh +++ b/tools/testing/selftests/rcutorture/bin/jitter.sh @@ -5,10 +5,11 @@ # of this script is to inflict random OS jitter on a concurrently running # test. # -# Usage: jitter.sh me duration [ sleepmax [ spinmax ] ] +# Usage: jitter.sh me jittering-path duration [ sleepmax [ spinmax ] ] # # me: Random-number-generator seed salt. # duration: Time to run in seconds. +# jittering-path: Path to file whose removal will stop this script. # sleepmax: Maximum microseconds to sleep, defaults to one second. # spinmax: Maximum microseconds to spin, defaults to one millisecond. # @@ -17,9 +18,10 @@ # Authors: Paul E. McKenney <paulmck@linux.ibm.com> me=$(($1 * 1000)) -duration=$2 -sleepmax=${3-1000000} -spinmax=${4-1000} +jittering=$2 +duration=$3 +sleepmax=${4-1000000} +spinmax=${5-1000} n=1 @@ -47,7 +49,7 @@ do fi # Check for stop request. - if test -f "$TORTURE_STOPFILE" + if ! test -f "$jittering" then exit 1; fi @@ -67,10 +69,10 @@ do srand(n + me + systime()); ncpus = split(cpus, ca); curcpu = ca[int(rand() * ncpus + 1)]; - mask = lshift(1, curcpu); - if (mask + 0 <= 0) - mask = 1; - printf("%#x\n", mask); + z = ""; + for (i = 1; 4 * i <= curcpu; i++) + z = z "0"; + print "0x" 2 ^ (curcpu % 4) z; }' < /dev/null` n=$(($n+1)) if ! taskset -p $cpumask $$ > /dev/null 2>&1 diff --git a/tools/testing/selftests/rcutorture/bin/jitterstart.sh b/tools/testing/selftests/rcutorture/bin/jitterstart.sh new file mode 100644 index 000000000000..3d710ad291c3 --- /dev/null +++ b/tools/testing/selftests/rcutorture/bin/jitterstart.sh @@ -0,0 +1,37 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ +# +# Start up the specified number of jitter.sh scripts in the background. +# +# Usage: . jitterstart.sh n jittering-dir duration [ sleepmax [ spinmax ] ] +# +# n: Number of jitter.sh scripts to start up. +# jittering-dir: Directory in which to put "jittering" file. +# duration: Time to run in seconds. +# sleepmax: Maximum microseconds to sleep, defaults to one second. +# spinmax: Maximum microseconds to spin, defaults to one millisecond. +# +# Copyright (C) 2021 Facebook, Inc. +# +# Authors: Paul E. McKenney <paulmck@kernel.org> + +jitter_n=$1 +if test -z "$jitter_n" +then + echo jitterstart.sh: Missing count of jitter.sh scripts to start. + exit 33 +fi +jittering_dir=$2 +if test -z "$jittering_dir" +then + echo jitterstart.sh: Missing directory in which to place jittering file. + exit 34 +fi +shift +shift + +touch ${jittering_dir}/jittering +for ((jitter_i = 1; jitter_i <= $jitter_n; jitter_i++)) +do + jitter.sh $jitter_i "${jittering_dir}/jittering" "$@" & +done diff --git a/tools/testing/selftests/rcutorture/bin/jitterstop.sh b/tools/testing/selftests/rcutorture/bin/jitterstop.sh new file mode 100644 index 000000000000..576a4cf4b79a --- /dev/null +++ b/tools/testing/selftests/rcutorture/bin/jitterstop.sh @@ -0,0 +1,23 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ +# +# Remove the "jittering" file, signaling the jitter.sh scripts to stop, +# then wait for them to terminate. +# +# Usage: . jitterstop.sh jittering-dir +# +# jittering-dir: Directory containing "jittering" file. +# +# Copyright (C) 2021 Facebook, Inc. +# +# Authors: Paul E. McKenney <paulmck@kernel.org> + +jittering_dir=$1 +if test -z "$jittering_dir" +then + echo jitterstop.sh: Missing directory in which to place jittering file. + exit 34 +fi + +rm -f ${jittering_dir}/jittering +wait diff --git a/tools/testing/selftests/rcutorture/bin/kvm-again.sh b/tools/testing/selftests/rcutorture/bin/kvm-again.sh new file mode 100755 index 000000000000..46e47a00a7db --- /dev/null +++ b/tools/testing/selftests/rcutorture/bin/kvm-again.sh @@ -0,0 +1,199 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ +# +# Rerun a series of tests under KVM. +# +# Usage: kvm-again.sh /path/to/old/run [ options ] +# +# Copyright (C) 2021 Facebook, Inc. +# +# Authors: Paul E. McKenney <paulmck@kernel.org> + +scriptname=$0 +args="$*" + +T=${TMPDIR-/tmp}/kvm-again.sh.$$ +trap 'rm -rf $T' 0 +mkdir $T + +if ! test -d tools/testing/selftests/rcutorture/bin +then + echo $scriptname must be run from top-level directory of kernel source tree. + exit 1 +fi + +oldrun=$1 +shift +if ! test -d "$oldrun" +then + echo "Usage: $scriptname /path/to/old/run [ options ]" + exit 1 +fi +if ! cp "$oldrun/batches" $T/batches.oldrun +then + # Later on, can reconstitute this from console.log files. + echo Prior run batches file does not exist: $oldrun/batches + exit 1 +fi + +if test -f "$oldrun/torture_suite" +then + torture_suite="`cat $oldrun/torture_suite`" +elif test -f "$oldrun/TORTURE_SUITE" +then + torture_suite="`cat $oldrun/TORTURE_SUITE`" +else + echo "Prior run torture_suite file does not exist: $oldrun/{torture_suite,TORTURE_SUITE}" + exit 1 +fi + +KVM="`pwd`/tools/testing/selftests/rcutorture"; export KVM +PATH=${KVM}/bin:$PATH; export PATH +. functions.sh + +dryrun= +dur= +default_link="cp -R" +rundir="`pwd`/tools/testing/selftests/rcutorture/res/`date +%Y.%m.%d-%H.%M.%S-again`" + +startdate="`date`" +starttime="`get_starttime`" + +usage () { + echo "Usage: $scriptname $oldrun [ arguments ]:" + echo " --dryrun" + echo " --duration minutes | <seconds>s | <hours>h | <days>d" + echo " --link hard|soft|copy" + echo " --remote" + echo " --rundir /new/res/path" + exit 1 +} + +while test $# -gt 0 +do + case "$1" in + --dryrun) + dryrun=1 + ;; + --duration) + checkarg --duration "(minutes)" $# "$2" '^[0-9][0-9]*\(s\|m\|h\|d\|\)$' '^error' + mult=60 + if echo "$2" | grep -q 's$' + then + mult=1 + elif echo "$2" | grep -q 'h$' + then + mult=3600 + elif echo "$2" | grep -q 'd$' + then + mult=86400 + fi + ts=`echo $2 | sed -e 's/[smhd]$//'` + dur=$(($ts*mult)) + shift + ;; + --link) + checkarg --link "hard|soft|copy" "$#" "$2" 'hard\|soft\|copy' '^--' + case "$2" in + copy) + arg_link="cp -R" + ;; + hard) + arg_link="cp -Rl" + ;; + soft) + arg_link="cp -Rs" + ;; + esac + shift + ;; + --remote) + arg_remote=1 + default_link="cp -as" + ;; + --rundir) + checkarg --rundir "(absolute pathname)" "$#" "$2" '^/' '^error' + rundir=$2 + if test -e "$rundir" + then + echo "--rundir $2: Already exists." + usage + fi + shift + ;; + *) + echo Unknown argument $1 + usage + ;; + esac + shift +done +if test -z "$arg_link" +then + arg_link="$default_link" +fi + +echo ---- Re-run results directory: $rundir + +# Copy old run directory tree over and adjust. +mkdir -p "`dirname "$rundir"`" +if ! $arg_link "$oldrun" "$rundir" +then + echo "Cannot copy from $oldrun to $rundir." + usage +fi +rm -f "$rundir"/*/{console.log,console.log.diags,qemu_pid,qemu-retval,Warnings,kvm-test-1-run.sh.out,kvm-test-1-run-qemu.sh.out,vmlinux} "$rundir"/log +echo $oldrun > "$rundir/re-run" +if ! test -d "$rundir/../../bin" +then + $arg_link "$oldrun/../../bin" "$rundir/../.." +fi +for i in $rundir/*/qemu-cmd +do + cp "$i" $T + qemu_cmd_dir="`dirname "$i"`" + kernel_dir="`echo $qemu_cmd_dir | sed -e 's/\.[0-9]\+$//'`" + jitter_dir="`dirname "$kernel_dir"`" + kvm-transform.sh "$kernel_dir/bzImage" "$qemu_cmd_dir/console.log" "$jitter_dir" $dur < $T/qemu-cmd > $i + if test -n "$arg_remote" + then + echo "# TORTURE_KCONFIG_GDB_ARG=''" >> $i + fi +done + +# Extract settings from the last qemu-cmd file transformed above. +grep '^#' $i | sed -e 's/^# //' > $T/qemu-cmd-settings +. $T/qemu-cmd-settings + +grep -v '^#' $T/batches.oldrun | awk ' +BEGIN { + oldbatch = 1; +} + +{ + if (oldbatch != $1) { + print "kvm-test-1-run-batch.sh" curbatch; + curbatch = ""; + oldbatch = $1; + } + curbatch = curbatch " " $2; +} + +END { + print "kvm-test-1-run-batch.sh" curbatch +}' > $T/runbatches.sh + +if test -n "$dryrun" +then + echo ---- Dryrun complete, directory: $rundir | tee -a "$rundir/log" +else + ( cd "$rundir"; sh $T/runbatches.sh ) + kcsan-collapse.sh "$rundir" | tee -a "$rundir/log" + echo | tee -a "$rundir/log" + echo ---- Results directory: $rundir | tee -a "$rundir/log" + kvm-recheck.sh "$rundir" > $T/kvm-recheck.sh.out 2>&1 + ret=$? + cat $T/kvm-recheck.sh.out | tee -a "$rundir/log" + echo " --- Done at `date` (`get_starttime_duration $starttime`) exitcode $ret" | tee -a "$rundir/log" + exit $ret +fi diff --git a/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh b/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh index 47cf4db10896..e01b31b87044 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh @@ -30,7 +30,7 @@ do resdir=`echo $i | sed -e 's,/$,,' -e 's,/[^/]*$,,'` head -1 $resdir/log fi - TORTURE_SUITE="`cat $i/../TORTURE_SUITE`" + TORTURE_SUITE="`cat $i/../torture_suite`" configfile=`echo $i | sed -e 's,^.*/,,'` rm -f $i/console.log.*.diags kvm-recheck-${TORTURE_SUITE}.sh $i diff --git a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-batch.sh b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-batch.sh new file mode 100755 index 000000000000..7ea0809e229e --- /dev/null +++ b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-batch.sh @@ -0,0 +1,67 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ +# +# Carry out a kvm-based run for the specified batch of scenarios, which +# might have been built by --build-only kvm.sh run. +# +# Usage: kvm-test-1-run-batch.sh SCENARIO [ SCENARIO ... ] +# +# Each SCENARIO is the name of a directory in the current directory +# containing a ready-to-run qemu-cmd file. +# +# Copyright (C) 2021 Facebook, Inc. +# +# Authors: Paul E. McKenney <paulmck@kernel.org> + +T=${TMPDIR-/tmp}/kvm-test-1-run-batch.sh.$$ +trap 'rm -rf $T' 0 +mkdir $T + +echo ---- Running batch $* +# Check arguments +runfiles= +for i in "$@" +do + if ! echo $i | grep -q '^[^/.a-z]\+\(\.[0-9]\+\)\?$' + then + echo Bad scenario name: \"$i\" 1>&2 + exit 1 + fi + if ! test -d "$i" + then + echo Scenario name not a directory: \"$i\" 1>&2 + exit 2 + fi + if ! test -f "$i/qemu-cmd" + then + echo Scenario lacks a command file: \"$i/qemu-cmd\" 1>&2 + exit 3 + fi + rm -f $i/build.* + touch $i/build.run + runfiles="$runfiles $i/build.run" +done + +# Extract settings from the qemu-cmd file. +grep '^#' $1/qemu-cmd | sed -e 's/^# //' > $T/qemu-cmd-settings +. $T/qemu-cmd-settings + +# Start up jitter, start each scenario, wait, end jitter. +echo ---- System running test: `uname -a` +echo ---- Starting kernels. `date` | tee -a log +$TORTURE_JITTER_START +for i in "$@" +do + echo ---- System running test: `uname -a` > $i/kvm-test-1-run-qemu.sh.out + echo > $i/kvm-test-1-run-qemu.sh.out + kvm-test-1-run-qemu.sh $i >> $i/kvm-test-1-run-qemu.sh.out 2>&1 & +done +for i in $runfiles +do + while ls $i > /dev/null 2>&1 + do + : + done +done +echo ---- All kernel runs complete. `date` | tee -a log +$TORTURE_JITTER_STOP diff --git a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-qemu.sh b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-qemu.sh new file mode 100755 index 000000000000..5b1aa2a4f3f6 --- /dev/null +++ b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-qemu.sh @@ -0,0 +1,176 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ +# +# Carry out a kvm-based run for the specified qemu-cmd file, which might +# have been generated by --build-only kvm.sh run. +# +# Usage: kvm-test-1-run-qemu.sh qemu-cmd-dir +# +# qemu-cmd-dir provides the directory containing qemu-cmd file. +# This is assumed to be of the form prefix/ds/scenario, where +# "ds" is the top-level date-stamped directory and "scenario" +# is the scenario name. Any required adjustments to this file +# must have been made by the caller. The shell-command comments +# at the end of the qemu-cmd file are not optional. +# +# Copyright (C) 2021 Facebook, Inc. +# +# Authors: Paul E. McKenney <paulmck@kernel.org> + +T=${TMPDIR-/tmp}/kvm-test-1-run-qemu.sh.$$ +trap 'rm -rf $T' 0 +mkdir $T + +resdir="$1" +if ! test -d "$resdir" +then + echo $0: Nonexistent directory: $resdir + exit 1 +fi +if ! test -f "$resdir/qemu-cmd" +then + echo $0: Nonexistent qemu-cmd file: $resdir/qemu-cmd + exit 1 +fi + +echo ' ---' `date`: Starting kernel, PID $$ + +# Obtain settings from the qemu-cmd file. +grep '^#' $resdir/qemu-cmd | sed -e 's/^# //' > $T/qemu-cmd-settings +. $T/qemu-cmd-settings + +# Decorate qemu-cmd with redirection, backgrounding, and PID capture +sed -e 's/$/ 2>\&1 \&/' < $resdir/qemu-cmd > $T/qemu-cmd +echo 'echo $! > $resdir/qemu_pid' >> $T/qemu-cmd + +# In case qemu refuses to run... +echo "NOTE: $QEMU either did not run or was interactive" > $resdir/console.log + +# Attempt to run qemu +kstarttime=`gawk 'BEGIN { print systime() }' < /dev/null` +( . $T/qemu-cmd; wait `cat $resdir/qemu_pid`; echo $? > $resdir/qemu-retval ) & +commandcompleted=0 +if test -z "$TORTURE_KCONFIG_GDB_ARG" +then + sleep 10 # Give qemu's pid a chance to reach the file + if test -s "$resdir/qemu_pid" + then + qemu_pid=`cat "$resdir/qemu_pid"` + echo Monitoring qemu job at pid $qemu_pid + else + qemu_pid="" + echo Monitoring qemu job at yet-as-unknown pid + fi +fi +if test -n "$TORTURE_KCONFIG_GDB_ARG" +then + base_resdir=`echo $resdir | sed -e 's/\.[0-9]\+$//'` + if ! test -f $base_resdir/vmlinux + then + base_resdir="`cat re-run`/$resdir" + if ! test -f $base_resdir/vmlinux + then + base_resdir=/path/to + fi + fi + echo Waiting for you to attach a debug session, for example: > /dev/tty + echo " gdb $base_resdir/vmlinux" > /dev/tty + echo 'After symbols load and the "(gdb)" prompt appears:' > /dev/tty + echo " target remote :1234" > /dev/tty + echo " continue" > /dev/tty + kstarttime=`gawk 'BEGIN { print systime() }' < /dev/null` +fi +while : +do + if test -z "$qemu_pid" -a -s "$resdir/qemu_pid" + then + qemu_pid=`cat "$resdir/qemu_pid"` + fi + kruntime=`gawk 'BEGIN { print systime() - '"$kstarttime"' }' < /dev/null` + if test -z "$qemu_pid" || kill -0 "$qemu_pid" > /dev/null 2>&1 + then + if test -n "$TORTURE_KCONFIG_GDB_ARG" + then + : + elif test $kruntime -ge $seconds || test -f "$resdir/../STOP.1" + then + break; + fi + sleep 1 + else + commandcompleted=1 + if test $kruntime -lt $seconds + then + echo Completed in $kruntime vs. $seconds >> $resdir/Warnings 2>&1 + grep "^(qemu) qemu:" $resdir/kvm-test-1-run.sh.out >> $resdir/Warnings 2>&1 + killpid="`sed -n "s/^(qemu) qemu: terminating on signal [0-9]* from pid \([0-9]*\).*$/\1/p" $resdir/Warnings`" + if test -n "$killpid" + then + echo "ps -fp $killpid" >> $resdir/Warnings 2>&1 + ps -fp $killpid >> $resdir/Warnings 2>&1 + fi + else + echo ' ---' `date`: "Kernel done" + fi + break + fi +done +if test -z "$qemu_pid" -a -s "$resdir/qemu_pid" +then + qemu_pid=`cat "$resdir/qemu_pid"` +fi +if test $commandcompleted -eq 0 -a -n "$qemu_pid" +then + if ! test -f "$resdir/../STOP.1" + then + echo Grace period for qemu job at pid $qemu_pid + fi + oldline="`tail $resdir/console.log`" + while : + do + if test -f "$resdir/../STOP.1" + then + echo "PID $qemu_pid killed due to run STOP.1 request" >> $resdir/Warnings 2>&1 + kill -KILL $qemu_pid + break + fi + kruntime=`gawk 'BEGIN { print systime() - '"$kstarttime"' }' < /dev/null` + if kill -0 $qemu_pid > /dev/null 2>&1 + then + : + else + break + fi + must_continue=no + newline="`tail $resdir/console.log`" + if test "$newline" != "$oldline" && echo $newline | grep -q ' [0-9]\+us : ' + then + must_continue=yes + fi + last_ts="`tail $resdir/console.log | grep '^\[ *[0-9]\+\.[0-9]\+]' | tail -1 | sed -e 's/^\[ *//' -e 's/\..*$//'`" + if test -z "$last_ts" + then + last_ts=0 + fi + if test "$newline" != "$oldline" -a "$last_ts" -lt $((seconds + $TORTURE_SHUTDOWN_GRACE)) + then + must_continue=yes + fi + if test $must_continue = no -a $kruntime -ge $((seconds + $TORTURE_SHUTDOWN_GRACE)) + then + echo "!!! PID $qemu_pid hung at $kruntime vs. $seconds seconds" >> $resdir/Warnings 2>&1 + kill -KILL $qemu_pid + break + fi + oldline=$newline + sleep 10 + done +elif test -z "$qemu_pid" +then + echo Unknown PID, cannot kill qemu command +fi + +# Tell the script that this run is done. +rm -f $resdir/build.run + +parse-console.sh $resdir/console.log $title diff --git a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh index 536d103ef166..420ed5ce9d32 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh @@ -7,15 +7,15 @@ # Execute this in the source tree. Do not run it as a background task # because qemu does not seem to like that much. # -# Usage: kvm-test-1-run.sh config builddir resdir seconds qemu-args boot_args +# Usage: kvm-test-1-run.sh config resdir seconds qemu-args boot_args_in # # qemu-args defaults to "-enable-kvm -nographic", along with arguments # specifying the number of CPUs and other options # generated from the underlying CPU architecture. -# boot_args defaults to value returned by the per_version_boot_params +# boot_args_in defaults to value returned by the per_version_boot_params # shell function. # -# Anything you specify for either qemu-args or boot_args is appended to +# Anything you specify for either qemu-args or boot_args_in is appended to # the default values. The "-smp" value is deduced from the contents of # the config fragment. # @@ -35,14 +35,13 @@ mkdir $T config_template=${1} config_dir=`echo $config_template | sed -e 's,/[^/]*$,,'` title=`echo $config_template | sed -e 's/^.*\///'` -builddir=${2} -resdir=${3} +resdir=${2} if test -z "$resdir" -o ! -d "$resdir" -o ! -w "$resdir" then echo "kvm-test-1-run.sh :$resdir: Not a writable directory, cannot store results into it" exit 1 fi -echo ' ---' `date`: Starting build +echo ' ---' `date`: Starting build, PID $$ echo ' ---' Kconfig fragment at: $config_template >> $resdir/log touch $resdir/ConfigFragment.input @@ -73,7 +72,7 @@ config_override_param "--kconfig argument" KcList "$TORTURE_KCONFIG_ARG" cp $T/KcList $resdir/ConfigFragment base_resdir=`echo $resdir | sed -e 's/\.[0-9]\+$//'` -if test "$base_resdir" != "$resdir" -a -f $base_resdir/bzImage -a -f $base_resdir/vmlinux +if test "$base_resdir" != "$resdir" && test -f $base_resdir/bzImage && test -f $base_resdir/vmlinux then # Rerunning previous test, so use that test's kernel. QEMU="`identify_qemu $base_resdir/vmlinux`" @@ -83,6 +82,17 @@ then ln -s $base_resdir/.config $resdir # for kvm-recheck.sh # Arch-independent indicator touch $resdir/builtkernel +elif test "$base_resdir" != "$resdir" +then + # Rerunning previous test for which build failed + ln -s $base_resdir/Make*.out $resdir # for kvm-recheck.sh + ln -s $base_resdir/.config $resdir # for kvm-recheck.sh + echo Initial build failed, not running KVM, see $resdir. + if test -f $resdir/build.wait + then + mv $resdir/build.wait $resdir/build.ready + fi + exit 1 elif kvm-build.sh $T/KcList $resdir then # Had to build a kernel for this test. @@ -107,23 +117,23 @@ else # Build failed. cp .config $resdir || : echo Build failed, not running KVM, see $resdir. - if test -f $builddir.wait + if test -f $resdir/build.wait then - mv $builddir.wait $builddir.ready + mv $resdir/build.wait $resdir/build.ready fi exit 1 fi -if test -f $builddir.wait +if test -f $resdir/build.wait then - mv $builddir.wait $builddir.ready + mv $resdir/build.wait $resdir/build.ready fi -while test -f $builddir.ready +while test -f $resdir/build.ready do sleep 1 done -seconds=$4 -qemu_args=$5 -boot_args=$6 +seconds=$3 +qemu_args=$4 +boot_args_in=$5 if test -z "$TORTURE_BUILDONLY" then @@ -133,7 +143,7 @@ fi # Generate -smp qemu argument. qemu_args="-enable-kvm -nographic $qemu_args" cpu_count=`configNR_CPUS.sh $resdir/ConfigFragment` -cpu_count=`configfrag_boot_cpus "$boot_args" "$config_template" "$cpu_count"` +cpu_count=`configfrag_boot_cpus "$boot_args_in" "$config_template" "$cpu_count"` if test "$cpu_count" -gt "$TORTURE_ALLOTED_CPUS" then echo CPU count limited from $cpu_count to $TORTURE_ALLOTED_CPUS | tee -a $resdir/Warnings @@ -149,16 +159,52 @@ qemu_args="$qemu_args `identify_qemu_args "$QEMU" "$resdir/console.log"`" qemu_append="`identify_qemu_append "$QEMU"`" # Pull in Kconfig-fragment boot parameters -boot_args="`configfrag_boot_params "$boot_args" "$config_template"`" +boot_args="`configfrag_boot_params "$boot_args_in" "$config_template"`" # Generate kernel-version-specific boot parameters boot_args="`per_version_boot_params "$boot_args" $resdir/.config $seconds`" if test -n "$TORTURE_BOOT_GDB_ARG" then boot_args="$boot_args $TORTURE_BOOT_GDB_ARG" fi + +# Give bare-metal advice +modprobe_args="`echo $boot_args | tr -s ' ' '\012' | grep "^$TORTURE_MOD\." | sed -e "s/$TORTURE_MOD\.//g"`" +kboot_args="`echo $boot_args | tr -s ' ' '\012' | grep -v "^$TORTURE_MOD\."`" +testid_txt="`dirname $resdir`/testid.txt" +touch $resdir/bare-metal +echo To run this scenario on bare metal: >> $resdir/bare-metal +echo >> $resdir/bare-metal +echo " 1." Set your bare-metal build tree to the state shown in this file: >> $resdir/bare-metal +echo " " $testid_txt >> $resdir/bare-metal +echo " 2." Update your bare-metal build tree"'"s .config based on this file: >> $resdir/bare-metal +echo " " $resdir/ConfigFragment >> $resdir/bare-metal +echo " 3." Make the bare-metal kernel"'"s build system aware of your .config updates: >> $resdir/bare-metal +echo " " $ 'yes "" | make oldconfig' >> $resdir/bare-metal +echo " 4." Build your bare-metal kernel. >> $resdir/bare-metal +echo " 5." Boot your bare-metal kernel with the following parameters: >> $resdir/bare-metal +echo " " $kboot_args >> $resdir/bare-metal +echo " 6." Start the test with the following command: >> $resdir/bare-metal +echo " " $ modprobe $TORTURE_MOD $modprobe_args >> $resdir/bare-metal +echo " 7." After some time, end the test with the following command: >> $resdir/bare-metal +echo " " $ rmmod $TORTURE_MOD >> $resdir/bare-metal +echo " 8." Copy your bare-metal kernel"'"s .config file, overwriting this file: >> $resdir/bare-metal +echo " " $resdir/.config >> $resdir/bare-metal +echo " 9." Copy the console output from just before the modprobe to just after >> $resdir/bare-metal +echo " " the rmmod into this file: >> $resdir/bare-metal +echo " " $resdir/console.log >> $resdir/bare-metal +echo "10." Check for runtime errors using the following command: >> $resdir/bare-metal +echo " " $ tools/testing/selftests/rcutorture/bin/kvm-recheck.sh `dirname $resdir` >> $resdir/bare-metal +echo >> $resdir/bare-metal +echo Some of the above steps may be skipped if you build your bare-metal >> $resdir/bare-metal +echo kernel here: `head -n 1 $testid_txt | sed -e 's/^Build directory: //'` >> $resdir/bare-metal + echo $QEMU $qemu_args -m $TORTURE_QEMU_MEM -kernel $KERNEL -append \"$qemu_append $boot_args\" $TORTURE_QEMU_GDB_ARG > $resdir/qemu-cmd echo "# TORTURE_SHUTDOWN_GRACE=$TORTURE_SHUTDOWN_GRACE" >> $resdir/qemu-cmd echo "# seconds=$seconds" >> $resdir/qemu-cmd +echo "# TORTURE_KCONFIG_GDB_ARG=\"$TORTURE_KCONFIG_GDB_ARG\"" >> $resdir/qemu-cmd +echo "# TORTURE_JITTER_START=\"$TORTURE_JITTER_START\"" >> $resdir/qemu-cmd +echo "# TORTURE_JITTER_STOP=\"$TORTURE_JITTER_STOP\"" >> $resdir/qemu-cmd +echo "# TORTURE_TRUST_MAKE=\"$TORTURE_TRUST_MAKE\"; export TORTURE_TRUST_MAKE" >> $resdir/qemu-cmd if test -n "$TORTURE_BUILDONLY" then @@ -167,140 +213,4 @@ then exit 0 fi -# Decorate qemu-cmd with redirection, backgrounding, and PID capture -sed -e 's/$/ 2>\&1 \&/' < $resdir/qemu-cmd > $T/qemu-cmd -echo 'echo $! > $resdir/qemu_pid' >> $T/qemu-cmd - -# In case qemu refuses to run... -echo "NOTE: $QEMU either did not run or was interactive" > $resdir/console.log - -# Attempt to run qemu -kstarttime=`gawk 'BEGIN { print systime() }' < /dev/null` -( . $T/qemu-cmd; wait `cat $resdir/qemu_pid`; echo $? > $resdir/qemu-retval ) & -commandcompleted=0 -if test -z "$TORTURE_KCONFIG_GDB_ARG" -then - sleep 10 # Give qemu's pid a chance to reach the file - if test -s "$resdir/qemu_pid" - then - qemu_pid=`cat "$resdir/qemu_pid"` - echo Monitoring qemu job at pid $qemu_pid - else - qemu_pid="" - echo Monitoring qemu job at yet-as-unknown pid - fi -fi -if test -n "$TORTURE_KCONFIG_GDB_ARG" -then - echo Waiting for you to attach a debug session, for example: > /dev/tty - echo " gdb $base_resdir/vmlinux" > /dev/tty - echo 'After symbols load and the "(gdb)" prompt appears:' > /dev/tty - echo " target remote :1234" > /dev/tty - echo " continue" > /dev/tty - kstarttime=`gawk 'BEGIN { print systime() }' < /dev/null` -fi -while : -do - if test -z "$qemu_pid" -a -s "$resdir/qemu_pid" - then - qemu_pid=`cat "$resdir/qemu_pid"` - fi - kruntime=`gawk 'BEGIN { print systime() - '"$kstarttime"' }' < /dev/null` - if test -z "$qemu_pid" || kill -0 "$qemu_pid" > /dev/null 2>&1 - then - if test -n "$TORTURE_KCONFIG_GDB_ARG" - then - : - elif test $kruntime -ge $seconds || test -f "$resdir/../STOP.1" - then - break; - fi - sleep 1 - else - commandcompleted=1 - if test $kruntime -lt $seconds - then - echo Completed in $kruntime vs. $seconds >> $resdir/Warnings 2>&1 - grep "^(qemu) qemu:" $resdir/kvm-test-1-run.sh.out >> $resdir/Warnings 2>&1 - killpid="`sed -n "s/^(qemu) qemu: terminating on signal [0-9]* from pid \([0-9]*\).*$/\1/p" $resdir/Warnings`" - if test -n "$killpid" - then - echo "ps -fp $killpid" >> $resdir/Warnings 2>&1 - ps -fp $killpid >> $resdir/Warnings 2>&1 - fi - # Reduce probability of PID reuse by allowing a one-minute buffer - if test $((kruntime + 60)) -lt $seconds && test -s "$resdir/../jitter_pids" - then - awk < "$resdir/../jitter_pids" ' - NF > 0 { - pidlist = pidlist " " $1; - n++; - } - END { - if (n > 0) { - print "kill " pidlist; - } - }' | sh - fi - else - echo ' ---' `date`: "Kernel done" - fi - break - fi -done -if test -z "$qemu_pid" -a -s "$resdir/qemu_pid" -then - qemu_pid=`cat "$resdir/qemu_pid"` -fi -if test $commandcompleted -eq 0 -a -n "$qemu_pid" -then - if ! test -f "$resdir/../STOP.1" - then - echo Grace period for qemu job at pid $qemu_pid - fi - oldline="`tail $resdir/console.log`" - while : - do - if test -f "$resdir/../STOP.1" - then - echo "PID $qemu_pid killed due to run STOP.1 request" >> $resdir/Warnings 2>&1 - kill -KILL $qemu_pid - break - fi - kruntime=`gawk 'BEGIN { print systime() - '"$kstarttime"' }' < /dev/null` - if kill -0 $qemu_pid > /dev/null 2>&1 - then - : - else - break - fi - must_continue=no - newline="`tail $resdir/console.log`" - if test "$newline" != "$oldline" && echo $newline | grep -q ' [0-9]\+us : ' - then - must_continue=yes - fi - last_ts="`tail $resdir/console.log | grep '^\[ *[0-9]\+\.[0-9]\+]' | tail -1 | sed -e 's/^\[ *//' -e 's/\..*$//'`" - if test -z "$last_ts" - then - last_ts=0 - fi - if test "$newline" != "$oldline" -a "$last_ts" -lt $((seconds + $TORTURE_SHUTDOWN_GRACE)) - then - must_continue=yes - fi - if test $must_continue = no -a $kruntime -ge $((seconds + $TORTURE_SHUTDOWN_GRACE)) - then - echo "!!! PID $qemu_pid hung at $kruntime vs. $seconds seconds" >> $resdir/Warnings 2>&1 - kill -KILL $qemu_pid - break - fi - oldline=$newline - sleep 10 - done -elif test -z "$qemu_pid" -then - echo Unknown PID, cannot kill qemu command -fi - -parse-console.sh $resdir/console.log $title +kvm-test-1-run-qemu.sh $resdir diff --git a/tools/testing/selftests/rcutorture/bin/kvm-transform.sh b/tools/testing/selftests/rcutorture/bin/kvm-transform.sh index c45a953ef393..d40b4e60a50c 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-transform.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-transform.sh @@ -3,7 +3,7 @@ # # Transform a qemu-cmd file to allow reuse. # -# Usage: kvm-transform.sh bzImage console.log < qemu-cmd-in > qemu-cmd-out +# Usage: kvm-transform.sh bzImage console.log jitter_dir [ seconds ] < qemu-cmd-in > qemu-cmd-out # # bzImage: Kernel and initrd from the same prior kvm.sh run. # console.log: File into which to place console output. @@ -29,20 +29,62 @@ then echo "Need console log file name." exit 1 fi +jitter_dir="$3" +if test -z "$jitter_dir" || ! test -d "$jitter_dir" +then + echo "Need valid jitter directory: '$jitter_dir'" + exit 1 +fi +seconds="$4" +if test -n "$seconds" && echo $seconds | grep -q '[^0-9]' +then + echo "Invalid duration, should be numeric in seconds: '$seconds'" + exit 1 +fi + +awk -v image="$image" -v consolelog="$consolelog" -v jitter_dir="$jitter_dir" \ + -v seconds="$seconds" ' +/^# seconds=/ { + if (seconds == "") + print $0; + else + print "# seconds=" seconds; + next; +} + +/^# TORTURE_JITTER_START=/ { + print "# TORTURE_JITTER_START=\". jitterstart.sh " $4 " " jitter_dir " " $6 " " $7; + next; +} + +/^# TORTURE_JITTER_STOP=/ { + print "# TORTURE_JITTER_STOP=\". jitterstop.sh " " " jitter_dir " " $5; + next; +} + +/^#/ { + print $0; + next; +} -awk -v image="$image" -v consolelog="$consolelog" ' { line = ""; for (i = 1; i <= NF; i++) { - if (line == "") + if ("" seconds != "" && $i ~ /\.shutdown_secs=[0-9]*$/) { + sub(/[0-9]*$/, seconds, $i); + if (line == "") + line = $i; + else + line = line " " $i; + } else if (line == "") { line = $i; - else + } else { line = line " " $i; + } if ($i == "-serial") { i++; line = line " file:" consolelog; - } - if ($i == "-kernel") { + } else if ($i == "-kernel") { i++; line = line " " image; } diff --git a/tools/testing/selftests/rcutorture/bin/kvm.sh b/tools/testing/selftests/rcutorture/bin/kvm.sh index 8d3c99b35e06..6bf00a003d3d 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm.sh @@ -29,17 +29,21 @@ PATH=${KVM}/bin:$PATH; export PATH TORTURE_ALLOTED_CPUS="`identify_qemu_vcpus`" TORTURE_DEFCONFIG=defconfig TORTURE_BOOT_IMAGE="" +TORTURE_BUILDONLY= TORTURE_INITRD="$KVM/initrd"; export TORTURE_INITRD TORTURE_KCONFIG_ARG="" TORTURE_KCONFIG_GDB_ARG="" TORTURE_BOOT_GDB_ARG="" TORTURE_QEMU_GDB_ARG="" +TORTURE_JITTER_START="" +TORTURE_JITTER_STOP="" TORTURE_KCONFIG_KASAN_ARG="" TORTURE_KCONFIG_KCSAN_ARG="" TORTURE_KMAKE_ARG="" TORTURE_QEMU_MEM=512 TORTURE_SHUTDOWN_GRACE=180 TORTURE_SUITE=rcu +TORTURE_MOD=rcutorture TORTURE_TRUST_MAKE="" resdir="" configs="" @@ -100,7 +104,7 @@ do TORTURE_BUILDONLY=1 ;; --configs|--config) - checkarg --configs "(list of config files)" "$#" "$2" '^[^/]\+$' '^--' + checkarg --configs "(list of config files)" "$#" "$2" '^[^/.a-z]\+$' '^--' configs="$configs $2" shift ;; @@ -116,7 +120,7 @@ do shift ;; --datestamp) - checkarg --datestamp "(relative pathname)" "$#" "$2" '^[a-zA-Z0-9._-/]*$' '^--' + checkarg --datestamp "(relative pathname)" "$#" "$2" '^[a-zA-Z0-9._/-]*$' '^--' ds=$2 shift ;; @@ -215,6 +219,7 @@ do --torture) checkarg --torture "(suite name)" "$#" "$2" '^\(lock\|rcu\|rcuscale\|refscale\|scf\)$' '^--' TORTURE_SUITE=$2 + TORTURE_MOD="`echo $TORTURE_SUITE | sed -e 's/^\(lock\|rcu\|scf\)$/\1torture/'`" shift if test "$TORTURE_SUITE" = rcuscale || test "$TORTURE_SUITE" = refscale then @@ -381,6 +386,7 @@ TORTURE_QEMU_GDB_ARG="$TORTURE_QEMU_GDB_ARG"; export TORTURE_QEMU_GDB_ARG TORTURE_KCONFIG_KASAN_ARG="$TORTURE_KCONFIG_KASAN_ARG"; export TORTURE_KCONFIG_KASAN_ARG TORTURE_KCONFIG_KCSAN_ARG="$TORTURE_KCONFIG_KCSAN_ARG"; export TORTURE_KCONFIG_KCSAN_ARG TORTURE_KMAKE_ARG="$TORTURE_KMAKE_ARG"; export TORTURE_KMAKE_ARG +TORTURE_MOD="$TORTURE_MOD"; export TORTURE_MOD TORTURE_QEMU_CMD="$TORTURE_QEMU_CMD"; export TORTURE_QEMU_CMD TORTURE_QEMU_INTERACTIVE="$TORTURE_QEMU_INTERACTIVE"; export TORTURE_QEMU_INTERACTIVE TORTURE_QEMU_MAC="$TORTURE_QEMU_MAC"; export TORTURE_QEMU_MAC @@ -399,12 +405,17 @@ echo Results directory: $resdir/$ds echo $scriptname $args touch $resdir/$ds/log echo $scriptname $args >> $resdir/$ds/log -echo ${TORTURE_SUITE} > $resdir/$ds/TORTURE_SUITE -pwd > $resdir/$ds/testid.txt +echo ${TORTURE_SUITE} > $resdir/$ds/torture_suite +echo Build directory: `pwd` > $resdir/$ds/testid.txt if test -d .git then + echo Current commit: `git rev-parse HEAD` >> $resdir/$ds/testid.txt + echo >> $resdir/$ds/testid.txt + echo ' ---' Output of "'"git status"'": >> $resdir/$ds/testid.txt git status >> $resdir/$ds/testid.txt - git rev-parse HEAD >> $resdir/$ds/testid.txt + echo >> $resdir/$ds/testid.txt + echo >> $resdir/$ds/testid.txt + echo ' ---' Output of "'"git diff HEAD"'": >> $resdir/$ds/testid.txt git diff HEAD >> $resdir/$ds/testid.txt fi ___EOF___ @@ -434,8 +445,17 @@ function dump(first, pastlast, batchnum) print "echo ----Start batch " batchnum ": `date` | tee -a " rd "log"; print "needqemurun=" jn=1 + njitter = 0; + split(jitter, ja); + if (ja[1] == -1 && ncpus == 0) + njitter = 1; + else if (ja[1] == -1) + njitter = ncpus; + else + njitter = ja[1]; + print "TORTURE_JITTER_START=\". jitterstart.sh " njitter " " rd " " dur " " ja[2] " " ja[3] "\"; export TORTURE_JITTER_START"; + print "TORTURE_JITTER_STOP=\". jitterstop.sh " rd " \"; export TORTURE_JITTER_STOP" for (j = first; j < pastlast; j++) { - builddir=KVM "/b" j - first + 1 cpusr[jn] = cpus[j]; if (cfrep[cf[j]] == "") { cfr[jn] = cf[j]; @@ -444,15 +464,15 @@ function dump(first, pastlast, batchnum) cfrep[cf[j]]++; cfr[jn] = cf[j] "." cfrep[cf[j]]; } + builddir=rd cfr[jn] "/build"; if (cpusr[jn] > ncpus && ncpus != 0) ovf = "-ovf"; else ovf = ""; print "echo ", cfr[jn], cpusr[jn] ovf ": Starting build. `date` | tee -a " rd "log"; - print "rm -f " builddir ".*"; - print "touch " builddir ".wait"; print "mkdir " rd cfr[jn] " || :"; - print "kvm-test-1-run.sh " CONFIGDIR cf[j], builddir, rd cfr[jn], dur " \"" TORTURE_QEMU_ARG "\" \"" TORTURE_BOOTARGS "\" > " rd cfr[jn] "/kvm-test-1-run.sh.out 2>&1 &" + print "touch " builddir ".wait"; + print "kvm-test-1-run.sh " CONFIGDIR cf[j], rd cfr[jn], dur " \"" TORTURE_QEMU_ARG "\" \"" TORTURE_BOOTARGS "\" > " rd cfr[jn] "/kvm-test-1-run.sh.out 2>&1 &" print "echo ", cfr[jn], cpusr[jn] ovf ": Waiting for build to complete. `date` | tee -a " rd "log"; print "while test -f " builddir ".wait" print "do" @@ -461,23 +481,21 @@ function dump(first, pastlast, batchnum) print "echo ", cfr[jn], cpusr[jn] ovf ": Build complete. `date` | tee -a " rd "log"; jn++; } + print "runfiles=" for (j = 1; j < jn; j++) { - builddir=KVM "/b" j - print "rm -f " builddir ".ready" + builddir=rd cfr[j] "/build"; + if (TORTURE_BUILDONLY) + print "rm -f " builddir ".ready" + else + print "mv " builddir ".ready " builddir ".run" + print "runfiles=\"$runfiles " builddir ".run\"" + fi print "if test -f \"" rd cfr[j] "/builtkernel\"" print "then" print "\techo ----", cfr[j], cpusr[j] ovf ": Kernel present. `date` | tee -a " rd "log"; print "\tneedqemurun=1" print "fi" } - njitter = 0; - split(jitter, ja); - if (ja[1] == -1 && ncpus == 0) - njitter = 1; - else if (ja[1] == -1) - njitter = ncpus; - else - njitter = ja[1]; if (TORTURE_BUILDONLY && njitter != 0) { njitter = 0; print "echo Build-only run, so suppressing jitter | tee -a " rd "log" @@ -488,19 +506,18 @@ function dump(first, pastlast, batchnum) print "if test -n \"$needqemurun\"" print "then" print "\techo ---- Starting kernels. `date` | tee -a " rd "log"; - print "\techo > " rd "jitter_pids" - for (j = 0; j < njitter; j++) { - print "\tjitter.sh " j " " dur " " ja[2] " " ja[3] "&" - print "\techo $! >> " rd "jitter_pids" - } - print "\twait" + print "\t$TORTURE_JITTER_START"; + print "\twhile ls $runfiles > /dev/null 2>&1" + print "\tdo" + print "\t\t:" + print "\tdone" + print "\t$TORTURE_JITTER_STOP"; print "\techo ---- All kernel runs complete. `date` | tee -a " rd "log"; print "else" print "\twait" print "\techo ---- No kernel runs. `date` | tee -a " rd "log"; print "fi" for (j = 1; j < jn; j++) { - builddir=KVM "/b" j print "echo ----", cfr[j], cpusr[j] ovf ": Build/run results: | tee -a " rd "log"; print "cat " rd cfr[j] "/kvm-test-1-run.sh.out | tee -a " rd "log"; } @@ -548,6 +565,18 @@ echo 'ret=$?' >> $T/script echo "cat $T/kvm-recheck.sh.out | tee -a $resdir/$ds/log" >> $T/script echo 'exit $ret' >> $T/script +# Extract the tests and their batches from the script. +egrep 'Start batch|Starting build\.' $T/script | grep -v ">>" | + sed -e 's/:.*$//' -e 's/^echo //' -e 's/-ovf//' | + awk ' + /^----Start/ { + batchno = $3; + next; + } + { + print batchno, $1, $2 + }' > $T/batches + if test "$dryrun" = script then cat $T/script @@ -566,21 +595,14 @@ then exit 0 elif test "$dryrun" = batches then - # Extract the tests and their batches from the script. - egrep 'Start batch|Starting build\.' $T/script | grep -v ">>" | - sed -e 's/:.*$//' -e 's/^echo //' -e 's/-ovf//' | - awk ' - /^----Start/ { - batchno = $3; - next; - } - { - print batchno, $1, $2 - }' + cat $T/batches + exit 0 else - # Not a dryrun, so run the script. + # Not a dryrun. Record the batches and the number of CPUs, then run the script. bash $T/script ret=$? + cp $T/batches $resdir/$ds/batches + echo '#' cpus=$cpus >> $resdir/$ds/batches echo " --- Done at `date` (`get_starttime_duration $starttime`) exitcode $ret" | tee -a $resdir/$ds/log exit $ret fi diff --git a/tools/testing/selftests/rcutorture/bin/torture.sh b/tools/testing/selftests/rcutorture/bin/torture.sh index ad7525b7ac29..56e2e1a42569 100755 --- a/tools/testing/selftests/rcutorture/bin/torture.sh +++ b/tools/testing/selftests/rcutorture/bin/torture.sh @@ -374,7 +374,7 @@ done if test "$do_kvfree" = "yes" then torture_bootargs="rcuscale.kfree_rcu_test=1 rcuscale.kfree_nthreads=16 rcuscale.holdoff=20 rcuscale.kfree_loops=10000 torture.disable_onoff_at_boot" - torture_set "rcuscale-kvfree" tools/testing/selftests/rcutorture/bin/kvm.sh --torture rcuscale --allcpus --duration 10 --kconfig "CONFIG_NR_CPUS=$HALF_ALLOTED_CPUS" --trust-make + torture_set "rcuscale-kvfree" tools/testing/selftests/rcutorture/bin/kvm.sh --torture rcuscale --allcpus --duration 10 --kconfig "CONFIG_NR_CPUS=$HALF_ALLOTED_CPUS" --memory 1G --trust-make fi echo " --- " $scriptname $args diff --git a/tools/testing/selftests/rcutorture/configs/rcu/CFLIST b/tools/testing/selftests/rcutorture/configs/rcu/CFLIST index f2b20db9e296..98b6175e5aa0 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/CFLIST +++ b/tools/testing/selftests/rcutorture/configs/rcu/CFLIST @@ -7,8 +7,8 @@ TREE07 TREE09 SRCU-N SRCU-P -SRCU-t -SRCU-u +SRCU-T +SRCU-U TINY01 TINY02 TASKS01 diff --git a/tools/testing/selftests/rcutorture/configs/rcu/SRCU-t b/tools/testing/selftests/rcutorture/configs/rcu/SRCU-T index d6557c38dfe4..d6557c38dfe4 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/SRCU-t +++ b/tools/testing/selftests/rcutorture/configs/rcu/SRCU-T diff --git a/tools/testing/selftests/rcutorture/configs/rcu/SRCU-t.boot b/tools/testing/selftests/rcutorture/configs/rcu/SRCU-T.boot index 238bfe3bd0cc..238bfe3bd0cc 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/SRCU-t.boot +++ b/tools/testing/selftests/rcutorture/configs/rcu/SRCU-T.boot diff --git a/tools/testing/selftests/rcutorture/configs/rcu/SRCU-u b/tools/testing/selftests/rcutorture/configs/rcu/SRCU-U index 6bc24e99862f..6bc24e99862f 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/SRCU-u +++ b/tools/testing/selftests/rcutorture/configs/rcu/SRCU-U diff --git a/tools/testing/selftests/rcutorture/configs/rcu/SRCU-u.boot b/tools/testing/selftests/rcutorture/configs/rcu/SRCU-U.boot index ce48c7b82673..ce48c7b82673 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/SRCU-u.boot +++ b/tools/testing/selftests/rcutorture/configs/rcu/SRCU-U.boot diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE03.boot b/tools/testing/selftests/rcutorture/configs/rcu/TREE03.boot index 1c218944b1e9..64f864f1f361 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/TREE03.boot +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE03.boot @@ -4,3 +4,4 @@ rcutree.gp_init_delay=3 rcutree.gp_cleanup_delay=3 rcutree.kthread_prio=2 threadirqs +tree.use_softirq=0 diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE04.boot b/tools/testing/selftests/rcutorture/configs/rcu/TREE04.boot index 5adc6756792a..a8d94caf7d2f 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/TREE04.boot +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE04.boot @@ -1 +1 @@ -rcutree.rcu_fanout_leaf=4 nohz_full=1-7 +rcutree.rcu_fanout_leaf=4 nohz_full=1-N diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE08.boot b/tools/testing/selftests/rcutorture/configs/rcu/TREE08.boot index 22478fd3a865..94d38445d393 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/TREE08.boot +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE08.boot @@ -1,3 +1,3 @@ rcupdate.rcu_self_test=1 rcutree.rcu_fanout_exact=1 -rcu_nocbs=0-7 +rcu_nocbs=all diff --git a/tools/testing/selftests/rcutorture/configs/rcuscale/ver_functions.sh b/tools/testing/selftests/rcutorture/configs/rcuscale/ver_functions.sh index 0333e9b18522..ffbe15109f0d 100644 --- a/tools/testing/selftests/rcutorture/configs/rcuscale/ver_functions.sh +++ b/tools/testing/selftests/rcutorture/configs/rcuscale/ver_functions.sh @@ -12,5 +12,5 @@ # Adds per-version torture-module parameters to kernels supporting them. per_version_boot_params () { echo $1 rcuscale.shutdown=1 \ - rcuscale.verbose=1 + rcuscale.verbose=0 } diff --git a/tools/testing/selftests/rcutorture/configs/refscale/ver_functions.sh b/tools/testing/selftests/rcutorture/configs/refscale/ver_functions.sh index 321e82641287..f81fa2c541a6 100644 --- a/tools/testing/selftests/rcutorture/configs/refscale/ver_functions.sh +++ b/tools/testing/selftests/rcutorture/configs/refscale/ver_functions.sh @@ -12,5 +12,5 @@ # Adds per-version torture-module parameters to kernels supporting them. per_version_boot_params () { echo $1 refscale.shutdown=1 \ - refscale.verbose=1 + refscale.verbose=0 } |