diff options
| -rw-r--r-- | drivers/regulator/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/regulator/Makefile | 1 | ||||
| -rw-r--r-- | drivers/regulator/bd70528-regulator.c | 278 |
3 files changed, 0 insertions, 290 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 9aeb32c320aa..bc02ea3ea2ef 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -193,17 +193,6 @@ config REGULATOR_BCM590XX BCM590xx PMUs. This will enable support for the software controllable LDO/Switching regulators. -config REGULATOR_BD70528 - tristate "ROHM BD70528 Power Regulator" - depends on MFD_ROHM_BD70528 - help - This driver supports voltage regulators on ROHM BD70528 PMIC. - This will enable support for the software controllable buck - and LDO regulators. - - This driver can also be built as a module. If so, the module - will be called bd70528-regulator. - config REGULATOR_BD71815 tristate "ROHM BD71815 Power Regulator" depends on MFD_ROHM_BD71828 diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 580b015296ea..6a5d55e209d3 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -29,7 +29,6 @@ obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o obj-$(CONFIG_REGULATOR_ATC260X) += atc260x-regulator.o obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o -obj-$(CONFIG_REGULATOR_BD70528) += bd70528-regulator.o obj-$(CONFIG_REGULATOR_BD71815) += bd71815-regulator.o obj-$(CONFIG_REGULATOR_BD71828) += bd71828-regulator.o obj-$(CONFIG_REGULATOR_BD718XX) += bd718x7-regulator.o diff --git a/drivers/regulator/bd70528-regulator.c b/drivers/regulator/bd70528-regulator.c deleted file mode 100644 index e6fec70fabfa..000000000000 --- a/drivers/regulator/bd70528-regulator.c +++ /dev/null @@ -1,278 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// Copyright (C) 2018 ROHM Semiconductors -// bd70528-regulator.c ROHM BD70528MWV regulator driver - -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/interrupt.h> -#include <linux/kernel.h> -#include <linux/mfd/rohm-bd70528.h> -#include <linux/module.h> -#include <linux/of.h> -#include <linux/platform_device.h> -#include <linux/regmap.h> -#include <linux/regulator/driver.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/of_regulator.h> -#include <linux/slab.h> - -static const struct linear_range bd70528_buck1_volts[] = { - REGULATOR_LINEAR_RANGE(1200000, 0x00, 0x1, 600000), - REGULATOR_LINEAR_RANGE(2750000, 0x2, 0xf, 50000), -}; -static const struct linear_range bd70528_buck2_volts[] = { - REGULATOR_LINEAR_RANGE(1200000, 0x00, 0x1, 300000), - REGULATOR_LINEAR_RANGE(1550000, 0x2, 0xd, 50000), - REGULATOR_LINEAR_RANGE(3000000, 0xe, 0xf, 300000), -}; -static const struct linear_range bd70528_buck3_volts[] = { - REGULATOR_LINEAR_RANGE(800000, 0x00, 0xd, 50000), - REGULATOR_LINEAR_RANGE(1800000, 0xe, 0xf, 0), -}; - -/* All LDOs have same voltage ranges */ -static const struct linear_range bd70528_ldo_volts[] = { - REGULATOR_LINEAR_RANGE(1650000, 0x0, 0x07, 50000), - REGULATOR_LINEAR_RANGE(2100000, 0x8, 0x0f, 100000), - REGULATOR_LINEAR_RANGE(2850000, 0x10, 0x19, 50000), - REGULATOR_LINEAR_RANGE(3300000, 0x19, 0x1f, 0), -}; - -/* Also both LEDs support same voltages */ -static const unsigned int led_volts[] = { - 20000, 30000 -}; - -static const unsigned int bd70528_buck_ramp_table[] = { - 250, 125 -}; - -static int bd70528_led_set_voltage_sel(struct regulator_dev *rdev, - unsigned int sel) -{ - int ret; - - ret = regulator_is_enabled_regmap(rdev); - if (ret < 0) - return ret; - - if (ret == 0) - return regulator_set_voltage_sel_regmap(rdev, sel); - - dev_err(&rdev->dev, - "LED voltage change not allowed when led is enabled\n"); - - return -EBUSY; -} - -static const struct regulator_ops bd70528_buck_ops = { - .enable = regulator_enable_regmap, - .disable = regulator_disable_regmap, - .is_enabled = regulator_is_enabled_regmap, - .list_voltage = regulator_list_voltage_linear_range, - .set_voltage_sel = regulator_set_voltage_sel_regmap, - .get_voltage_sel = regulator_get_voltage_sel_regmap, - .set_voltage_time_sel = regulator_set_voltage_time_sel, - .set_ramp_delay = regulator_set_ramp_delay_regmap, -}; - -static const struct regulator_ops bd70528_ldo_ops = { - .enable = regulator_enable_regmap, - .disable = regulator_disable_regmap, - .is_enabled = regulator_is_enabled_regmap, - .list_voltage = regulator_list_voltage_linear_range, - .set_voltage_sel = regulator_set_voltage_sel_regmap, - .get_voltage_sel = regulator_get_voltage_sel_regmap, - .set_voltage_time_sel = regulator_set_voltage_time_sel, -}; - -static const struct regulator_ops bd70528_led_ops = { - .enable = regulator_enable_regmap, - .disable = regulator_disable_regmap, - .is_enabled = regulator_is_enabled_regmap, - .list_voltage = regulator_list_voltage_table, - .set_voltage_sel = bd70528_led_set_voltage_sel, - .get_voltage_sel = regulator_get_voltage_sel_regmap, -}; - -static const struct regulator_desc bd70528_desc[] = { - { - .name = "buck1", - .of_match = of_match_ptr("BUCK1"), - .regulators_node = of_match_ptr("regulators"), - .id = BD70528_BUCK1, - .ops = &bd70528_buck_ops, - .type = REGULATOR_VOLTAGE, - .linear_ranges = bd70528_buck1_volts, - .n_linear_ranges = ARRAY_SIZE(bd70528_buck1_volts), - .n_voltages = BD70528_BUCK_VOLTS, - .enable_reg = BD70528_REG_BUCK1_EN, - .enable_mask = BD70528_MASK_RUN_EN, - .vsel_reg = BD70528_REG_BUCK1_VOLT, - .vsel_mask = BD70528_MASK_BUCK_VOLT, - .ramp_reg = BD70528_REG_BUCK1_VOLT, - .ramp_mask = BD70528_MASK_BUCK_RAMP, - .ramp_delay_table = bd70528_buck_ramp_table, - .n_ramp_values = ARRAY_SIZE(bd70528_buck_ramp_table), - .owner = THIS_MODULE, - }, - { - .name = "buck2", - .of_match = of_match_ptr("BUCK2"), - .regulators_node = of_match_ptr("regulators"), - .id = BD70528_BUCK2, - .ops = &bd70528_buck_ops, - .type = REGULATOR_VOLTAGE, - .linear_ranges = bd70528_buck2_volts, - .n_linear_ranges = ARRAY_SIZE(bd70528_buck2_volts), - .n_voltages = BD70528_BUCK_VOLTS, - .enable_reg = BD70528_REG_BUCK2_EN, - .enable_mask = BD70528_MASK_RUN_EN, - .vsel_reg = BD70528_REG_BUCK2_VOLT, - .vsel_mask = BD70528_MASK_BUCK_VOLT, - .ramp_reg = BD70528_REG_BUCK2_VOLT, - .ramp_mask = BD70528_MASK_BUCK_RAMP, - .ramp_delay_table = bd70528_buck_ramp_table, - .n_ramp_values = ARRAY_SIZE(bd70528_buck_ramp_table), - .owner = THIS_MODULE, - }, - { - .name = "buck3", - .of_match = of_match_ptr("BUCK3"), - .regulators_node = of_match_ptr("regulators"), - .id = BD70528_BUCK3, - .ops = &bd70528_buck_ops, - .type = REGULATOR_VOLTAGE, - .linear_ranges = bd70528_buck3_volts, - .n_linear_ranges = ARRAY_SIZE(bd70528_buck3_volts), - .n_voltages = BD70528_BUCK_VOLTS, - .enable_reg = BD70528_REG_BUCK3_EN, - .enable_mask = BD70528_MASK_RUN_EN, - .vsel_reg = BD70528_REG_BUCK3_VOLT, - .vsel_mask = BD70528_MASK_BUCK_VOLT, - .ramp_reg = BD70528_REG_BUCK3_VOLT, - .ramp_mask = BD70528_MASK_BUCK_RAMP, - .ramp_delay_table = bd70528_buck_ramp_table, - .n_ramp_values = ARRAY_SIZE(bd70528_buck_ramp_table), - .owner = THIS_MODULE, - }, - { - .name = "ldo1", - .of_match = of_match_ptr("LDO1"), - .regulators_node = of_match_ptr("regulators"), - .id = BD70528_LDO1, - .ops = &bd70528_ldo_ops, - .type = REGULATOR_VOLTAGE, - .linear_ranges = bd70528_ldo_volts, - .n_linear_ranges = ARRAY_SIZE(bd70528_ldo_volts), - .n_voltages = BD70528_LDO_VOLTS, - .enable_reg = BD70528_REG_LDO1_EN, - .enable_mask = BD70528_MASK_RUN_EN, - .vsel_reg = BD70528_REG_LDO1_VOLT, - .vsel_mask = BD70528_MASK_LDO_VOLT, - .owner = THIS_MODULE, - }, - { - .name = "ldo2", - .of_match = of_match_ptr("LDO2"), - .regulators_node = of_match_ptr("regulators"), - .id = BD70528_LDO2, - .ops = &bd70528_ldo_ops, - .type = REGULATOR_VOLTAGE, - .linear_ranges = bd70528_ldo_volts, - .n_linear_ranges = ARRAY_SIZE(bd70528_ldo_volts), - .n_voltages = BD70528_LDO_VOLTS, - .enable_reg = BD70528_REG_LDO2_EN, - .enable_mask = BD70528_MASK_RUN_EN, - .vsel_reg = BD70528_REG_LDO2_VOLT, - .vsel_mask = BD70528_MASK_LDO_VOLT, - .owner = THIS_MODULE, - }, - { - .name = "ldo3", - .of_match = of_match_ptr("LDO3"), - .regulators_node = of_match_ptr("regulators"), - .id = BD70528_LDO3, - .ops = &bd70528_ldo_ops, - .type = REGULATOR_VOLTAGE, - .linear_ranges = bd70528_ldo_volts, - .n_linear_ranges = ARRAY_SIZE(bd70528_ldo_volts), - .n_voltages = BD70528_LDO_VOLTS, - .enable_reg = BD70528_REG_LDO3_EN, - .enable_mask = BD70528_MASK_RUN_EN, - .vsel_reg = BD70528_REG_LDO3_VOLT, - .vsel_mask = BD70528_MASK_LDO_VOLT, - .owner = THIS_MODULE, - }, - { - .name = "ldo_led1", - .of_match = of_match_ptr("LDO_LED1"), - .regulators_node = of_match_ptr("regulators"), - .id = BD70528_LED1, - .ops = &bd70528_led_ops, - .type = REGULATOR_VOLTAGE, - .volt_table = &led_volts[0], - .n_voltages = ARRAY_SIZE(led_volts), - .enable_reg = BD70528_REG_LED_EN, - .enable_mask = BD70528_MASK_LED1_EN, - .vsel_reg = BD70528_REG_LED_VOLT, - .vsel_mask = BD70528_MASK_LED1_VOLT, - .owner = THIS_MODULE, - }, - { - .name = "ldo_led2", - .of_match = of_match_ptr("LDO_LED2"), - .regulators_node = of_match_ptr("regulators"), - .id = BD70528_LED2, - .ops = &bd70528_led_ops, - .type = REGULATOR_VOLTAGE, - .volt_table = &led_volts[0], - .n_voltages = ARRAY_SIZE(led_volts), - .enable_reg = BD70528_REG_LED_EN, - .enable_mask = BD70528_MASK_LED2_EN, - .vsel_reg = BD70528_REG_LED_VOLT, - .vsel_mask = BD70528_MASK_LED2_VOLT, - .owner = THIS_MODULE, - }, - -}; - -static int bd70528_probe(struct platform_device *pdev) -{ - int i; - struct regulator_config config = { - .dev = pdev->dev.parent, - }; - - config.regmap = dev_get_regmap(pdev->dev.parent, NULL); - if (!config.regmap) - return -ENODEV; - - for (i = 0; i < ARRAY_SIZE(bd70528_desc); i++) { - struct regulator_dev *rdev; - - rdev = devm_regulator_register(&pdev->dev, &bd70528_desc[i], - &config); - if (IS_ERR(rdev)) { - dev_err(&pdev->dev, - "failed to register %s regulator\n", - bd70528_desc[i].name); - return PTR_ERR(rdev); - } - } - return 0; -} - -static struct platform_driver bd70528_regulator = { - .driver = { - .name = "bd70528-pmic" - }, - .probe = bd70528_probe, -}; - -module_platform_driver(bd70528_regulator); - -MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>"); -MODULE_DESCRIPTION("BD70528 voltage regulator driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:bd70528-pmic"); |