diff options
| -rw-r--r-- | arch/mips/Kconfig | 61 | ||||
| -rw-r--r-- | arch/mips/bcm47xx/Kconfig | 8 | ||||
| -rw-r--r-- | arch/mips/bcm63xx/boards/Kconfig | 2 | ||||
| -rw-r--r-- | arch/mips/pic32/Kconfig | 8 |
4 files changed, 39 insertions, 40 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index cbf16db3366c..fb8a39d53168 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -275,7 +275,7 @@ config BCM47XX select BCM47XX_SPROM select BCM47XX_SSB if !BCM47XX_BCMA help - Support for BCM47XX based boards + Support for BCM47XX based boards config BCM63XX bool "Broadcom BCM63XX based boards" @@ -294,7 +294,7 @@ config BCM63XX select MIPS_L1_CACHE_SHIFT_4 select CLKDEV_LOOKUP help - Support for BCM63XX based boards + Support for BCM63XX based boards config MIPS_COBALT bool "Cobalt Server" @@ -373,10 +373,10 @@ config MACH_JAZZ select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_100HZ help - This a family of machines based on the MIPS R4030 chipset which was - used by several vendors to build RISC/os and Windows NT workstations. - Members include the Acer PICA, MIPS Magnum 4000, MIPS Millennium and - Olivetti M700-10 workstations. + This a family of machines based on the MIPS R4030 chipset which was + used by several vendors to build RISC/os and Windows NT workstations. + Members include the Acer PICA, MIPS Magnum 4000, MIPS Millennium and + Olivetti M700-10 workstations. config MACH_INGENIC bool "Ingenic SoC based machines" @@ -572,14 +572,14 @@ config NXP_STB220 bool "NXP STB220 board" select SOC_PNX833X help - Support for NXP Semiconductors STB220 Development Board. + Support for NXP Semiconductors STB220 Development Board. config NXP_STB225 bool "NXP 225 board" select SOC_PNX833X select SOC_PNX8335 help - Support for NXP Semiconductors STB225 Development Board. + Support for NXP Semiconductors STB225 Development Board. config PMC_MSP bool "PMC-Sierra MSP chipsets" @@ -721,9 +721,9 @@ config SGI_IP28 select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select MIPS_L1_CACHE_SHIFT_7 - help - This is the SGI Indigo2 with R10000 processor. To compile a Linux - kernel that runs on these, say Y here. + help + This is the SGI Indigo2 with R10000 processor. To compile a Linux + kernel that runs on these, say Y here. config SGI_IP32 bool "SGI IP32 (O2)" @@ -1174,9 +1174,9 @@ config HOLES_IN_ZONE config SYS_SUPPORTS_RELOCATABLE bool help - Selected if the platform supports relocating the kernel. - The platform must provide plat_get_fdt() if it selects CONFIG_USE_OF - to allow access to command line and entropy sources. + Selected if the platform supports relocating the kernel. + The platform must provide plat_get_fdt() if it selects CONFIG_USE_OF + to allow access to command line and entropy sources. config MIPS_CBPF_JIT def_bool y @@ -2119,8 +2119,8 @@ config MIPS_PGD_C0_CONTEXT # Set to y for ptrace access to watch registers. # config HARDWARE_WATCHPOINTS - bool - default y if CPU_MIPSR1 || CPU_MIPSR2 || CPU_MIPSR6 + bool + default y if CPU_MIPSR1 || CPU_MIPSR2 || CPU_MIPSR6 menu "Kernel type" @@ -2184,10 +2184,10 @@ config PAGE_SIZE_4KB bool "4kB" depends on !CPU_LOONGSON2 && !CPU_LOONGSON3 help - This option select the standard 4kB Linux page size. On some - R3000-family processors this is the only available page size. Using - 4kB page size will minimize memory consumption and is therefore - recommended for low memory systems. + This option select the standard 4kB Linux page size. On some + R3000-family processors this is the only available page size. Using + 4kB page size will minimize memory consumption and is therefore + recommended for low memory systems. config PAGE_SIZE_8KB bool "8kB" @@ -2480,7 +2480,6 @@ config SB1_PASS_2_1_WORKAROUNDS depends on CPU_SB1 && CPU_SB1_PASS_2 default y - choice prompt "SmartMIPS or microMIPS ASE support" @@ -2688,16 +2687,16 @@ config RANDOMIZE_BASE bool "Randomize the address of the kernel image" depends on RELOCATABLE ---help--- - Randomizes the physical and virtual address at which the - kernel image is loaded, as a security feature that - deters exploit attempts relying on knowledge of the location - of kernel internals. + Randomizes the physical and virtual address at which the + kernel image is loaded, as a security feature that + deters exploit attempts relying on knowledge of the location + of kernel internals. - Entropy is generated using any coprocessor 0 registers available. + Entropy is generated using any coprocessor 0 registers available. - The kernel will be offset by up to RANDOMIZE_BASE_MAX_OFFSET. + The kernel will be offset by up to RANDOMIZE_BASE_MAX_OFFSET. - If unsure, say N. + If unsure, say N. config RANDOMIZE_BASE_MAX_OFFSET hex "Maximum kASLR offset" if EXPERT @@ -2827,7 +2826,7 @@ choice prompt "Timer frequency" default HZ_250 help - Allows the configuration of the timer frequency. + Allows the configuration of the timer frequency. config HZ_24 bool "24 HZ" if SYS_SUPPORTS_24HZ || SYS_SUPPORTS_ARBIT_HZ @@ -3127,10 +3126,10 @@ config ARCH_MMAP_RND_BITS_MAX default 15 config ARCH_MMAP_RND_COMPAT_BITS_MIN - default 8 + default 8 config ARCH_MMAP_RND_COMPAT_BITS_MAX - default 15 + default 15 config I8253 bool diff --git a/arch/mips/bcm47xx/Kconfig b/arch/mips/bcm47xx/Kconfig index 29471038d817..6889f74e06f5 100644 --- a/arch/mips/bcm47xx/Kconfig +++ b/arch/mips/bcm47xx/Kconfig @@ -15,9 +15,9 @@ config BCM47XX_SSB select SSB_DRIVER_GPIO default y help - Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support. + Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support. - This will generate an image with support for SSB and MIPS32 R1 instruction set. + This will generate an image with support for SSB and MIPS32 R1 instruction set. config BCM47XX_BCMA bool "BCMA Support for Broadcom BCM47XX" @@ -31,8 +31,8 @@ config BCM47XX_BCMA select BCMA_DRIVER_GPIO default y help - Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus. + Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus. - This will generate an image with support for BCMA and MIPS32 R2 instruction set. + This will generate an image with support for BCMA and MIPS32 R2 instruction set. endif diff --git a/arch/mips/bcm63xx/boards/Kconfig b/arch/mips/bcm63xx/boards/Kconfig index f60d96610ace..492c3bd005d5 100644 --- a/arch/mips/bcm63xx/boards/Kconfig +++ b/arch/mips/bcm63xx/boards/Kconfig @@ -5,7 +5,7 @@ choice default BOARD_BCM963XX config BOARD_BCM963XX - bool "Generic Broadcom 963xx boards" + bool "Generic Broadcom 963xx boards" select SSB endchoice diff --git a/arch/mips/pic32/Kconfig b/arch/mips/pic32/Kconfig index e284e89183cc..7acbb50c1dcd 100644 --- a/arch/mips/pic32/Kconfig +++ b/arch/mips/pic32/Kconfig @@ -39,12 +39,12 @@ choice Select the devicetree. config DTB_PIC32_NONE - bool "None" + bool "None" config DTB_PIC32_MZDA_SK - bool "PIC32MZDA Starter Kit" - depends on PIC32MZDA - select BUILTIN_DTB + bool "PIC32MZDA Starter Kit" + depends on PIC32MZDA + select BUILTIN_DTB endchoice |