diff options
| -rw-r--r-- | drivers/iio/accel/Kconfig | 13 | ||||
| -rw-r--r-- | drivers/iio/accel/Makefile | 1 | ||||
| -rw-r--r-- | drivers/iio/accel/bmc150-accel.c | 1307 |
3 files changed, 1321 insertions, 0 deletions
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index 12addf272a61..5704d6bc2267 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -17,6 +17,19 @@ config BMA180 To compile this driver as a module, choose M here: the module will be called bma180. +config BMC150_ACCEL + tristate "Bosch BMC150 Accelerometer Driver" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for the Bosch BMC150 accelerometer. + Currently this only supports the device via an i2c interface. + + This is a combo module with both accelerometer and magnetometer. + This driver is only implementing accelerometer part, which has + its own address and register map. + config HID_SENSOR_ACCEL_3D depends on HID_SENSOR_HUB select IIO_BUFFER diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile index 6578ca1a8e09..a593996c6539 100644 --- a/drivers/iio/accel/Makefile +++ b/drivers/iio/accel/Makefile @@ -4,6 +4,7 @@ # When adding new entries keep the list in alphabetical order obj-$(CONFIG_BMA180) += bma180.o +obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel.o obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o obj-$(CONFIG_KXSD9) += kxsd9.o diff --git a/drivers/iio/accel/bmc150-accel.c b/drivers/iio/accel/bmc150-accel.c new file mode 100644 index 000000000000..23ae33496214 --- /dev/null +++ b/drivers/iio/accel/bmc150-accel.c @@ -0,0 +1,1307 @@ +/* + * BMC150 3-axis accelerometer driver + * Copyright (c) 2014, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/acpi.h> +#include <linux/gpio/consumer.h> +#include <linux/pm.h> +#include <linux/pm_runtime.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> +#include <linux/iio/events.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> + +#define BMC150_ACCEL_DRV_NAME "bmc150_accel" +#define BMC150_ACCEL_IRQ_NAME "bmc150_accel_event" +#define BMC150_ACCEL_GPIO_NAME "bmc150_accel_int" + +#define BMC150_ACCEL_REG_CHIP_ID 0x00 +#define BMC150_ACCEL_CHIP_ID_VAL 0xFA + +#define BMC150_ACCEL_REG_INT_STATUS_2 0x0B +#define BMC150_ACCEL_ANY_MOTION_MASK 0x07 +#define BMC150_ACCEL_ANY_MOTION_BIT_SIGN BIT(3) + +#define BMC150_ACCEL_REG_PMU_LPW 0x11 +#define BMC150_ACCEL_PMU_MODE_MASK 0xE0 +#define BMC150_ACCEL_PMU_MODE_SHIFT 5 +#define BMC150_ACCEL_PMU_BIT_SLEEP_DUR_MASK 0x17 +#define BMC150_ACCEL_PMU_BIT_SLEEP_DUR_SHIFT 1 + +#define BMC150_ACCEL_REG_PMU_RANGE 0x0F + +#define BMC150_ACCEL_DEF_RANGE_2G 0x03 +#define BMC150_ACCEL_DEF_RANGE_4G 0x05 +#define BMC150_ACCEL_DEF_RANGE_8G 0x08 +#define BMC150_ACCEL_DEF_RANGE_16G 0x0C + +/* Default BW: 125Hz */ +#define BMC150_ACCEL_REG_PMU_BW 0x10 +#define BMC150_ACCEL_DEF_BW 125 + +#define BMC150_ACCEL_REG_INT_MAP_0 0x19 +#define BMC150_ACCEL_INT_MAP_0_BIT_SLOPE BIT(2) + +#define BMC150_ACCEL_REG_INT_MAP_1 0x1A +#define BMC150_ACCEL_INT_MAP_1_BIT_DATA BIT(0) + +#define BMC150_ACCEL_REG_INT_RST_LATCH 0x21 +#define BMC150_ACCEL_INT_MODE_LATCH_RESET 0x80 +#define BMC150_ACCEL_INT_MODE_LATCH_INT 0x0F +#define BMC150_ACCEL_INT_MODE_NON_LATCH_INT 0x00 + +#define BMC150_ACCEL_REG_INT_EN_0 0x16 +#define BMC150_ACCEL_INT_EN_BIT_SLP_X BIT(0) +#define BMC150_ACCEL_INT_EN_BIT_SLP_Y BIT(1) +#define BMC150_ACCEL_INT_EN_BIT_SLP_Z BIT(2) + +#define BMC150_ACCEL_REG_INT_EN_1 0x17 +#define BMC150_ACCEL_INT_EN_BIT_DATA_EN BIT(4) + +#define BMC150_ACCEL_REG_INT_OUT_CTRL 0x20 +#define BMC150_ACCEL_INT_OUT_CTRL_INT1_LVL BIT(0) + +#define BMC150_ACCEL_REG_INT_5 0x27 +#define BMC150_ACCEL_SLOPE_DUR_MASK 0x03 + +#define BMC150_ACCEL_REG_INT_6 0x28 +#define BMC150_ACCEL_SLOPE_THRES_MASK 0xFF + +/* Slope duration in terms of number of samples */ +#define BMC150_ACCEL_DEF_SLOPE_DURATION 2 +/* in terms of multiples of g's/LSB, based on range */ +#define BMC150_ACCEL_DEF_SLOPE_THRESHOLD 5 + +#define BMC150_ACCEL_REG_XOUT_L 0x02 + +#define BMC150_ACCEL_MAX_STARTUP_TIME_MS 100 + +/* Sleep Duration values */ +#define BMC150_ACCEL_SLEEP_500_MICRO 0x05 +#define BMC150_ACCEL_SLEEP_1_MS 0x06 +#define BMC150_ACCEL_SLEEP_2_MS 0x07 +#define BMC150_ACCEL_SLEEP_4_MS 0x08 +#define BMC150_ACCEL_SLEEP_6_MS 0x09 +#define BMC150_ACCEL_SLEEP_10_MS 0x0A +#define BMC150_ACCEL_SLEEP_25_MS 0x0B +#define BMC150_ACCEL_SLEEP_50_MS 0x0C +#define BMC150_ACCEL_SLEEP_100_MS 0x0D +#define BMC150_ACCEL_SLEEP_500_MS 0x0E +#define BMC150_ACCEL_SLEEP_1_SEC 0x0F + +#define BMC150_ACCEL_REG_TEMP 0x08 +#define BMC150_ACCEL_TEMP_CENTER_VAL 24 + +#define BMC150_ACCEL_AXIS_TO_REG(axis) (BMC150_ACCEL_REG_XOUT_L + (axis * 2)) +#define BMC150_AUTO_SUSPEND_DELAY_MS 2000 + +enum bmc150_accel_axis { + AXIS_X, + AXIS_Y, + AXIS_Z, +}; + +enum bmc150_power_modes { + BMC150_ACCEL_SLEEP_MODE_NORMAL, + BMC150_ACCEL_SLEEP_MODE_DEEP_SUSPEND, + BMC150_ACCEL_SLEEP_MODE_LPM, + BMC150_ACCEL_SLEEP_MODE_SUSPEND = 0x04, +}; + +struct bmc150_accel_data { + struct i2c_client *client; + struct iio_trigger *dready_trig; + struct iio_trigger *motion_trig; + struct mutex mutex; + s16 buffer[8]; + u8 bw_bits; + u32 slope_dur; + u32 slope_thres; + u32 range; + int ev_enable_state; + bool dready_trigger_on; + bool motion_trigger_on; + int64_t timestamp; +}; + +static const struct { + int val; + int val2; + u8 bw_bits; +} bmc150_accel_samp_freq_table[] = { {7, 810000, 0x08}, + {15, 630000, 0x09}, + {31, 250000, 0x0A}, + {62, 500000, 0x0B}, + {125, 0, 0x0C}, + {250, 0, 0x0D}, + {500, 0, 0x0E}, + {1000, 0, 0x0F} }; + +static const struct { + int bw_bits; + int msec; +} bmc150_accel_sample_upd_time[] = { {0x08, 64}, + {0x09, 32}, + {0x0A, 16}, + {0x0B, 8}, + {0x0C, 4}, + {0x0D, 2}, + {0x0E, 1}, + {0x0F, 1} }; + +static const struct { + int scale; + int range; +} bmc150_accel_scale_table[] = { {9610, BMC150_ACCEL_DEF_RANGE_2G}, + {19122, BMC150_ACCEL_DEF_RANGE_4G}, + {38344, BMC150_ACCEL_DEF_RANGE_8G}, + {77057, BMC150_ACCEL_DEF_RANGE_16G} }; + +static const struct { + int sleep_dur; + int reg_value; +} bmc150_accel_sleep_value_table[] = { {0, 0}, + {500, BMC150_ACCEL_SLEEP_500_MICRO}, + {1000, BMC150_ACCEL_SLEEP_1_MS}, + {2000, BMC150_ACCEL_SLEEP_2_MS}, + {4000, BMC150_ACCEL_SLEEP_4_MS}, + {6000, BMC150_ACCEL_SLEEP_6_MS}, + {10000, BMC150_ACCEL_SLEEP_10_MS}, + {25000, BMC150_ACCEL_SLEEP_25_MS}, + {50000, BMC150_ACCEL_SLEEP_50_MS}, + {100000, BMC150_ACCEL_SLEEP_100_MS}, + {500000, BMC150_ACCEL_SLEEP_500_MS}, + {1000000, BMC150_ACCEL_SLEEP_1_SEC} }; + + +static int bmc150_accel_set_mode(struct bmc150_accel_data *data, + enum bmc150_power_modes mode, + int dur_us) +{ + int i; + int ret; + u8 lpw_bits; + int dur_val = -1; + + if (dur_us > 0) { + for (i = 0; i < ARRAY_SIZE(bmc150_accel_sleep_value_table); + ++i) { + if (bmc150_accel_sleep_value_table[i].sleep_dur == + dur_us) + dur_val = + bmc150_accel_sleep_value_table[i].reg_value; + } + } else + dur_val = 0; + + if (dur_val < 0) + return -EINVAL; + + lpw_bits = mode << BMC150_ACCEL_PMU_MODE_SHIFT; + lpw_bits |= (dur_val << BMC150_ACCEL_PMU_BIT_SLEEP_DUR_SHIFT); + + dev_dbg(&data->client->dev, "Set Mode bits %x\n", lpw_bits); + + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_PMU_LPW, lpw_bits); + if (ret < 0) { + dev_err(&data->client->dev, "Error writing reg_pmu_lpw\n"); + return ret; + } + + return 0; +} + +static int bmc150_accel_set_bw(struct bmc150_accel_data *data, int val, + int val2) +{ + int i; + int ret; + + for (i = 0; i < ARRAY_SIZE(bmc150_accel_samp_freq_table); ++i) { + if (bmc150_accel_samp_freq_table[i].val == val && + bmc150_accel_samp_freq_table[i].val2 == val2) { + ret = i2c_smbus_write_byte_data( + data->client, + BMC150_ACCEL_REG_PMU_BW, + bmc150_accel_samp_freq_table[i].bw_bits); + if (ret < 0) + return ret; + + data->bw_bits = + bmc150_accel_samp_freq_table[i].bw_bits; + return 0; + } + } + + return -EINVAL; +} + +static int bmc150_accel_chip_init(struct bmc150_accel_data *data) +{ + int ret; + + ret = i2c_smbus_read_byte_data(data->client, BMC150_ACCEL_REG_CHIP_ID); + if (ret < 0) { + dev_err(&data->client->dev, + "Error: Reading chip id\n"); + return ret; + } + + dev_dbg(&data->client->dev, "Chip Id %x\n", ret); + if (ret != BMC150_ACCEL_CHIP_ID_VAL) { + dev_err(&data->client->dev, "Invalid chip %x\n", ret); + return -ENODEV; + } + + ret = bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_NORMAL, 0); + if (ret < 0) + return ret; + + /* Set Bandwidth */ + ret = bmc150_accel_set_bw(data, BMC150_ACCEL_DEF_BW, 0); + if (ret < 0) + return ret; + + /* Set Default Range */ + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_PMU_RANGE, + BMC150_ACCEL_DEF_RANGE_4G); + if (ret < 0) { + dev_err(&data->client->dev, + "Error writing reg_pmu_range\n"); + return ret; + } + + data->range = BMC150_ACCEL_DEF_RANGE_4G; + + /* Set default slope duration */ + ret = i2c_smbus_read_byte_data(data->client, BMC150_ACCEL_REG_INT_5); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg_int_5\n"); + return ret; + } + data->slope_dur |= BMC150_ACCEL_DEF_SLOPE_DURATION; + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_INT_5, + data->slope_dur); + if (ret < 0) { + dev_err(&data->client->dev, "Error writing reg_int_5\n"); + return ret; + } + dev_dbg(&data->client->dev, "slope_dur %x\n", data->slope_dur); + + /* Set default slope thresholds */ + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_INT_6, + BMC150_ACCEL_DEF_SLOPE_THRESHOLD); + if (ret < 0) { + dev_err(&data->client->dev, "Error writing reg_int_6\n"); + return ret; + } + data->slope_thres = BMC150_ACCEL_DEF_SLOPE_THRESHOLD; + dev_dbg(&data->client->dev, "slope_thres %x\n", data->slope_thres); + + /* Set default as latched interrupts */ + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_INT_RST_LATCH, + BMC150_ACCEL_INT_MODE_LATCH_INT | + BMC150_ACCEL_INT_MODE_LATCH_RESET); + if (ret < 0) { + dev_err(&data->client->dev, + "Error writing reg_int_rst_latch\n"); + return ret; + } + + return 0; +} + +static int bmc150_accel_setup_any_motion_interrupt( + struct bmc150_accel_data *data, + bool status) +{ + int ret; + + /* Enable/Disable INT1 mapping */ + ret = i2c_smbus_read_byte_data(data->client, + BMC150_ACCEL_REG_INT_MAP_0); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg_int_map_0\n"); + return ret; + } + if (status) + ret |= BMC150_ACCEL_INT_MAP_0_BIT_SLOPE; + else + ret &= ~BMC150_ACCEL_INT_MAP_0_BIT_SLOPE; + + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_INT_MAP_0, + ret); + if (ret < 0) { + dev_err(&data->client->dev, "Error writing reg_int_map_0\n"); + return ret; + } + + if (status) { + /* Set slope duration (no of samples) */ + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_INT_5, + data->slope_dur); + if (ret < 0) { + dev_err(&data->client->dev, "Error write reg_int_5\n"); + return ret; + } + + /* Set slope thresholds */ + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_INT_6, + data->slope_thres); + if (ret < 0) { + dev_err(&data->client->dev, "Error write reg_int_6\n"); + return ret; + } + + /* + * New data interrupt is always non-latched, + * which will have higher priority, so no need + * to set latched mode, we will be flooded anyway with INTR + */ + if (!data->dready_trigger_on) { + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_INT_RST_LATCH, + BMC150_ACCEL_INT_MODE_LATCH_INT | + BMC150_ACCEL_INT_MODE_LATCH_RESET); + if (ret < 0) { + dev_err(&data->client->dev, + "Error writing reg_int_rst_latch\n"); + return ret; + } + } + + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_INT_EN_0, + BMC150_ACCEL_INT_EN_BIT_SLP_X | + BMC150_ACCEL_INT_EN_BIT_SLP_Y | + BMC150_ACCEL_INT_EN_BIT_SLP_Z); + } else + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_INT_EN_0, + 0); + + if (ret < 0) { + dev_err(&data->client->dev, "Error writing reg_int_en_0\n"); + return ret; + } + + return 0; +} + +static int bmc150_accel_setup_new_data_interrupt(struct bmc150_accel_data *data, + bool status) +{ + int ret; + + /* Enable/Disable INT1 mapping */ + ret = i2c_smbus_read_byte_data(data->client, + BMC150_ACCEL_REG_INT_MAP_1); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg_int_map_1\n"); + return ret; + } + if (status) + ret |= BMC150_ACCEL_INT_MAP_1_BIT_DATA; + else + ret &= ~BMC150_ACCEL_INT_MAP_1_BIT_DATA; + + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_INT_MAP_1, + ret); + if (ret < 0) { + dev_err(&data->client->dev, "Error writing reg_int_map_1\n"); + return ret; + } + + if (status) { + /* + * Set non latched mode interrupt and clear any latched + * interrupt + */ + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_INT_RST_LATCH, + BMC150_ACCEL_INT_MODE_NON_LATCH_INT | + BMC150_ACCEL_INT_MODE_LATCH_RESET); + if (ret < 0) { + dev_err(&data->client->dev, + "Error writing reg_int_rst_latch\n"); + return ret; + } + + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_INT_EN_1, + BMC150_ACCEL_INT_EN_BIT_DATA_EN); + + } else { + /* Restore default interrupt mode */ + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_INT_RST_LATCH, + BMC150_ACCEL_INT_MODE_LATCH_INT | + BMC150_ACCEL_INT_MODE_LATCH_RESET); + if (ret < 0) { + dev_err(&data->client->dev, + "Error writing reg_int_rst_latch\n"); + return ret; + } + + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_INT_EN_1, + 0); + } + + if (ret < 0) { + dev_err(&data->client->dev, "Error writing reg_int_en_1\n"); + return ret; + } + + return 0; +} + +static int bmc150_accel_get_bw(struct bmc150_accel_data *data, int *val, + int *val2) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(bmc150_accel_samp_freq_table); ++i) { + if (bmc150_accel_samp_freq_table[i].bw_bits == data->bw_bits) { + *val = bmc150_accel_samp_freq_table[i].val; + *val2 = bmc150_accel_samp_freq_table[i].val2; + return IIO_VAL_INT_PLUS_MICRO; + } + } + + return -EINVAL; +} + +static int bmc150_accel_get_startup_times(struct bmc150_accel_data *data) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(bmc150_accel_sample_upd_time); ++i) { + if (bmc150_accel_sample_upd_time[i].bw_bits == data->bw_bits) + return bmc150_accel_sample_upd_time[i].msec; + } + + return BMC150_ACCEL_MAX_STARTUP_TIME_MS; +} + +static int bmc150_accel_set_power_state(struct bmc150_accel_data *data, bool on) +{ + int ret; + + if (on) + ret = pm_runtime_get_sync(&data->client->dev); + else { + pm_runtime_mark_last_busy(&data->client->dev); + ret = pm_runtime_put_autosuspend(&data->client->dev); + } + if (ret < 0) { + dev_err(&data->client->dev, + "Failed: bmc150_accel_set_power_state for %d\n", on); + return ret; + } + + return 0; +} + +static int bmc150_accel_set_scale(struct bmc150_accel_data *data, int val) +{ + int ret, i; + + for (i = 0; i < ARRAY_SIZE(bmc150_accel_scale_table); ++i) { + if (bmc150_accel_scale_table[i].scale == val) { + ret = i2c_smbus_write_byte_data( + data->client, + BMC150_ACCEL_REG_PMU_RANGE, + bmc150_accel_scale_table[i].range); + if (ret < 0) { + dev_err(&data->client->dev, + "Error writing pmu_range\n"); + return ret; + } + + data->range = bmc150_accel_scale_table[i].range; + return 0; + } + } + + return -EINVAL; +} + +static int bmc150_accel_get_temp(struct bmc150_accel_data *data, int *val) +{ + int ret; + + mutex_lock(&data->mutex); + + ret = i2c_smbus_read_byte_data(data->client, BMC150_ACCEL_REG_TEMP); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg_temp\n"); + mutex_unlock(&data->mutex); + return ret; + } + *val = sign_extend32(ret, 7); + + mutex_unlock(&data->mutex); + + return IIO_VAL_INT; +} + +static int bmc150_accel_get_axis(struct bmc150_accel_data *data, int axis, + int *val) +{ + int ret; + + mutex_lock(&data->mutex); + ret = bmc150_accel_set_power_state(data, true); + if (ret < 0) { + mutex_unlock(&data->mutex); + return ret; + } + + ret = i2c_smbus_read_word_data(data->client, + BMC150_ACCEL_AXIS_TO_REG(axis)); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading axis %d\n", axis); + bmc150_accel_set_power_state(data, false); + mutex_unlock(&data->mutex); + return ret; + } + *val = sign_extend32(ret >> 4, 11); + ret = bmc150_accel_set_power_state(data, false); + mutex_unlock(&data->mutex); + if (ret < 0) + return ret; + + return IIO_VAL_INT; +} + +static int bmc150_accel_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + switch (chan->type) { + case IIO_TEMP: + return bmc150_accel_get_temp(data, val); + case IIO_ACCEL: + if (iio_buffer_enabled(indio_dev)) + return -EBUSY; + else + return bmc150_accel_get_axis(data, + chan->scan_index, + val); + default: + return -EINVAL; + } + case IIO_CHAN_INFO_OFFSET: + if (chan->type == IIO_TEMP) { + *val = BMC150_ACCEL_TEMP_CENTER_VAL; + return IIO_VAL_INT; + } else + return -EINVAL; + case IIO_CHAN_INFO_SCALE: + *val = 0; + switch (chan->type) { + case IIO_TEMP: + *val2 = 500000; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_ACCEL: + { + int i; + + for (i = 0; i < ARRAY_SIZE(bmc150_accel_scale_table); + ++i) { + if (bmc150_accel_scale_table[i].range == + data->range) { + *val2 = + bmc150_accel_scale_table[i].scale; + return IIO_VAL_INT_PLUS_MICRO; + } + } + return -EINVAL; + } + default: + return -EINVAL; + } + case IIO_CHAN_INFO_SAMP_FREQ: + mutex_lock(&data->mutex); + ret = bmc150_accel_get_bw(data, val, val2); + mutex_unlock(&data->mutex); + return ret; + default: + return -EINVAL; + } +} + +static int bmc150_accel_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + mutex_lock(&data->mutex); + ret = bmc150_accel_set_bw(data, val, val2); + mutex_unlock(&data->mutex); + break; + case IIO_CHAN_INFO_SCALE: + if (val) + return -EINVAL; + + mutex_lock(&data->mutex); + ret = bmc150_accel_set_scale(data, val2); + mutex_unlock(&data->mutex); + return ret; + default: + ret = -EINVAL; + } + + return ret; +} + +static int bmc150_accel_read_event(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, + int *val, int *val2) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + + *val2 = 0; + switch (info) { + case IIO_EV_INFO_VALUE: + *val = data->slope_thres; + break; + case IIO_EV_INFO_PERIOD: + *val = data->slope_dur & BMC150_ACCEL_SLOPE_DUR_MASK; + break; + default: + return -EINVAL; + } + + return IIO_VAL_INT; +} + +static int bmc150_accel_write_event(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, + int val, int val2) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + + if (data->ev_enable_state) + return -EBUSY; + + switch (info) { + case IIO_EV_INFO_VALUE: + data->slope_thres = val; + break; + case IIO_EV_INFO_PERIOD: + data->slope_dur &= ~BMC150_ACCEL_SLOPE_DUR_MASK; + data->slope_dur |= val & BMC150_ACCEL_SLOPE_DUR_MASK; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int bmc150_accel_read_event_config(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir) +{ + + struct bmc150_accel_data *data = iio_priv(indio_dev); + + return data->ev_enable_state; +} + +static int bmc150_accel_write_event_config(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + int state) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + int ret; + + if (state && data->ev_enable_state) + return 0; + + mutex_lock(&data->mutex); + + if (!state && data->motion_trigger_on) { + data->ev_enable_state = 0; + mutex_unlock(&data->mutex); + return 0; + } + + /* + * We will expect the enable and disable to do operation in + * in reverse order. This will happen here anyway as our + * resume operation uses sync mode runtime pm calls, the + * suspend operation will be delayed by autosuspend delay + * So the disable operation will still happen in reverse of + * enable operation. When runtime pm is disabled the mode + * is always on so sequence doesn't matter + */ + + ret = bmc150_accel_set_power_state(data, state); + if (ret < 0) { + mutex_unlock(&data->mutex); + return ret; + } + + ret = bmc150_accel_setup_any_motion_interrupt(data, state); + if (ret < 0) { + mutex_unlock(&data->mutex); + return ret; + } + + data->ev_enable_state = state; + mutex_unlock(&data->mutex); + + return 0; +} + +static int bmc150_accel_validate_trigger(struct iio_dev *indio_dev, + struct iio_trigger *trig) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + + if (data->dready_trig != trig && data->motion_trig != trig) + return -EINVAL; + + return 0; +} + +static IIO_CONST_ATTR_SAMP_FREQ_AVAIL( + "7.810000 15.630000 31.250000 62.500000 125 250 500 1000"); + +static struct attribute *bmc150_accel_attributes[] = { + &iio_const_attr_sampling_frequency_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group bmc150_accel_attrs_group = { + .attrs = bmc150_accel_attributes, +}; + +static const struct iio_event_spec bmc150_accel_event = { + .type = IIO_EV_TYPE_ROC, + .dir = IIO_EV_DIR_RISING | IIO_EV_DIR_FALLING, + .mask_separate = BIT(IIO_EV_INFO_VALUE) | + BIT(IIO_EV_INFO_ENABLE) | + BIT(IIO_EV_INFO_PERIOD) +}; + +#define BMC150_ACCEL_CHANNEL(_axis) { \ + .type = IIO_ACCEL, \ + .modified = 1, \ + .channel2 = IIO_MOD_##_axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = AXIS_##_axis, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 12, \ + .storagebits = 16, \ + .shift = 4, \ + }, \ + .event_spec = &bmc150_accel_event, \ + .num_event_specs = 1 \ +} + +static const struct iio_chan_spec bmc150_accel_channels[] = { + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_OFFSET), + .scan_index = -1, + }, + BMC150_ACCEL_CHANNEL(X), + BMC150_ACCEL_CHANNEL(Y), + BMC150_ACCEL_CHANNEL(Z), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + +static const struct iio_info bmc150_accel_info = { + .attrs = &bmc150_accel_attrs_group, + .read_raw = bmc150_accel_read_raw, + .write_raw = bmc150_accel_write_raw, + .read_event_value = bmc150_accel_read_event, + .write_event_value = bmc150_accel_write_event, + .write_event_config = bmc150_accel_write_event_config, + .read_event_config = bmc150_accel_read_event_config, + .validate_trigger = bmc150_accel_validate_trigger, + .driver_module = THIS_MODULE, +}; + +static irqreturn_t bmc150_accel_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct bmc150_accel_data *data = iio_priv(indio_dev); + int bit, ret, i = 0; + + mutex_lock(&data->mutex); + for_each_set_bit(bit, indio_dev->buffer->scan_mask, + indio_dev->masklength) { + ret = i2c_smbus_read_word_data(data->client, + BMC150_ACCEL_AXIS_TO_REG(bit)); + if (ret < 0) { + mutex_unlock(&data->mutex); + goto err_read; + } + data->buffer[i++] = ret; + } + mutex_unlock(&data->mutex); + + iio_push_to_buffers_with_timestamp(indio_dev, data->buffer, + data->timestamp); +err_read: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static int bmc150_accel_trig_try_reen(struct iio_trigger *trig) +{ + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); + struct bmc150_accel_data *data = iio_priv(indio_dev); + int ret; + + /* new data interrupts don't need ack */ + if (data->dready_trigger_on) + return 0; + + mutex_lock(&data->mutex); + /* clear any latched interrupt */ + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_INT_RST_LATCH, + BMC150_ACCEL_INT_MODE_LATCH_INT | + BMC150_ACCEL_INT_MODE_LATCH_RESET); + mutex_unlock(&data->mutex); + if (ret < 0) { + dev_err(&data->client->dev, + "Error writing reg_int_rst_latch\n"); + return ret; + } + + return 0; +} + +static int bmc150_accel_data_rdy_trigger_set_state(struct iio_trigger *trig, + bool state) +{ + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); + struct bmc150_accel_data *data = iio_priv(indio_dev); + int ret; + + mutex_lock(&data->mutex); + + if (!state && data->ev_enable_state && data->motion_trigger_on) { + data->motion_trigger_on = false; + mutex_unlock(&data->mutex); + return 0; + } + + /* + * Refer to comment in bmc150_accel_write_event_config for + * enable/disable operation order + */ + ret = bmc150_accel_set_power_state(data, state); + if (ret < 0) { + mutex_unlock(&data->mutex); + return ret; + } + if (data->motion_trig == trig) + ret = bmc150_accel_setup_any_motion_interrupt(data, state); + else + ret = bmc150_accel_setup_new_data_interrupt(data, state); + if (ret < 0) { + mutex_unlock(&data->mutex); + return ret; + } + if (data->motion_trig == trig) + data->motion_trigger_on = state; + else + data->dready_trigger_on = state; + + mutex_unlock(&data->mutex); + + return ret; +} + +static const struct iio_trigger_ops bmc150_accel_trigger_ops = { + .set_trigger_state = bmc150_accel_data_rdy_trigger_set_state, + .try_reenable = bmc150_accel_trig_try_reen, + .owner = THIS_MODULE, +}; + +static irqreturn_t bmc150_accel_event_handler(int irq, void *private) +{ + struct iio_dev *indio_dev = private; + struct bmc150_accel_data *data = iio_priv(indio_dev); + int ret; + int dir; + + ret = i2c_smbus_read_byte_data(data->client, + BMC150_ACCEL_REG_INT_STATUS_2); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg_int_status_2\n"); + goto ack_intr_status; + } + + if (ret & BMC150_ACCEL_ANY_MOTION_BIT_SIGN) + dir = IIO_EV_DIR_FALLING; + else + dir = IIO_EV_DIR_RISING; + + if (ret & BMC150_ACCEL_ANY_MOTION_MASK) + iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL, + 0, + IIO_MOD_X_OR_Y_OR_Z, + IIO_EV_TYPE_ROC, + IIO_EV_DIR_EITHER), + data->timestamp); +ack_intr_status: + if (!data->dready_trigger_on) + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_INT_RST_LATCH, + BMC150_ACCEL_INT_MODE_LATCH_INT | + BMC150_ACCEL_INT_MODE_LATCH_RESET); + + return IRQ_HANDLED; +} + +static irqreturn_t bmc150_accel_data_rdy_trig_poll(int irq, void *private) +{ + struct iio_dev *indio_dev = private; + struct bmc150_accel_data *data = iio_priv(indio_dev); + + data->timestamp = iio_get_time_ns(); + + if (data->dready_trigger_on) + iio_trigger_poll(data->dready_trig); + else if (data->motion_trigger_on) + iio_trigger_poll(data->motion_trig); + + if (data->ev_enable_state) + return IRQ_WAKE_THREAD; + else + return IRQ_HANDLED; +} + +static int bmc150_accel_acpi_gpio_probe(struct i2c_client *client, + struct bmc150_accel_data *data) +{ + const struct acpi_device_id *id; + struct device *dev; + struct gpio_desc *gpio; + int ret; + + if (!client) + return -EINVAL; + + dev = &client->dev; + if (!ACPI_HANDLE(dev)) + return -ENODEV; + + id = acpi_match_device(dev->driver->acpi_match_table, dev); + if (!id) + return -ENODEV; + + /* data ready gpio interrupt pin */ + gpio = devm_gpiod_get_index(dev, BMC150_ACCEL_GPIO_NAME, 0); + if (IS_ERR(gpio)) { + dev_err(dev, "Failed: acpi gpio get index\n"); + return PTR_ERR(gpio); + } + + ret = gpiod_direction_input(gpio); + if (ret) + return ret; + + ret = gpiod_to_irq(gpio); + + dev_dbg(dev, "GPIO resource, no:%d irq:%d\n", desc_to_gpio(gpio), ret); + + return ret; +} + +static int bmc150_accel_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct bmc150_accel_data *data; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + data->client = client; + + ret = bmc150_accel_chip_init(data); + if (ret < 0) + return ret; + + mutex_init(&data->mutex); + + indio_dev->dev.parent = &client->dev; + indio_dev->channels = bmc150_accel_channels; + indio_dev->num_channels = ARRAY_SIZE(bmc150_accel_channels); + indio_dev->name = BMC150_ACCEL_DRV_NAME; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &bmc150_accel_info; + + if (client->irq < 0) + client->irq = bmc150_accel_acpi_gpio_probe(client, data); + + if (client->irq >= 0) { + ret = devm_request_threaded_irq( + &client->dev, client->irq, + bmc150_accel_data_rdy_trig_poll, + bmc150_accel_event_handler, + IRQF_TRIGGER_RISING, + BMC150_ACCEL_IRQ_NAME, + indio_dev); + if (ret) + return ret; + + data->dready_trig = devm_iio_trigger_alloc(&client->dev, + "%s-dev%d", + indio_dev->name, + indio_dev->id); + if (!data->dready_trig) + return -ENOMEM; + + data->motion_trig = devm_iio_trigger_alloc(&client->dev, + "%s-any-motion-dev%d", + indio_dev->name, + indio_dev->id); + if (!data->motion_trig) + return -ENOMEM; + + data->dready_trig->dev.parent = &client->dev; + data->dready_trig->ops = &bmc150_accel_trigger_ops; + iio_trigger_set_drvdata(data->dready_trig, indio_dev); + ret = iio_trigger_register(data->dready_trig); + if (ret) + return ret; + + data->motion_trig->dev.parent = &client->dev; + data->motion_trig->ops = &bmc150_accel_trigger_ops; + iio_trigger_set_drvdata(data->motion_trig, indio_dev); + ret = iio_trigger_register(data->motion_trig); + if (ret) { + data->motion_trig = NULL; + goto err_trigger_unregister; + } + + ret = iio_triggered_buffer_setup(indio_dev, + &iio_pollfunc_store_time, + bmc150_accel_trigger_handler, + NULL); + if (ret < 0) { + dev_err(&client->dev, + "Failed: iio triggered buffer setup\n"); + goto err_trigger_unregister; + } + } + + ret = iio_device_register(indio_dev); + if (ret < 0) { + dev_err(&client->dev, "Unable to register iio device\n"); + goto err_buffer_cleanup; + } + + ret = pm_runtime_set_active(&client->dev); + if (ret) + goto err_iio_unregister; + + pm_runtime_enable(&client->dev); + pm_runtime_set_autosuspend_delay(&client->dev, + BMC150_AUTO_SUSPEND_DELAY_MS); + pm_runtime_use_autosuspend(&client->dev); + + return 0; + +err_iio_unregister: + iio_device_unregister(indio_dev); +err_buffer_cleanup: + if (data->dready_trig) + iio_triggered_buffer_cleanup(indio_dev); +err_trigger_unregister: + if (data->dready_trig) + iio_trigger_unregister(data->dready_trig); + if (data->motion_trig) + iio_trigger_unregister(data->motion_trig); + + return ret; +} + +static int bmc150_accel_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct bmc150_accel_data *data = iio_priv(indio_dev); + + pm_runtime_disable(&client->dev); + pm_runtime_set_suspended(&client->dev); + pm_runtime_put_noidle(&client->dev); + + iio_device_unregister(indio_dev); + + if (data->dready_trig) { + iio_triggered_buffer_cleanup(indio_dev); + iio_trigger_unregister(data->dready_trig); + iio_trigger_unregister(data->motion_trig); + } + + mutex_lock(&data->mutex); + bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_DEEP_SUSPEND, 0); + mutex_unlock(&data->mutex); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int bmc150_accel_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct bmc150_accel_data *data = iio_priv(indio_dev); + + mutex_lock(&data->mutex); + bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_SUSPEND, 0); + mutex_unlock(&data->mutex); + + return 0; +} + +static int bmc150_accel_resume(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct bmc150_accel_data *data = iio_priv(indio_dev); + + mutex_lock(&data->mutex); + if (data->dready_trigger_on || data->motion_trigger_on || + data->ev_enable_state) + bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_NORMAL, 0); + mutex_unlock(&data->mutex); + + return 0; +} +#endif + +#ifdef CONFIG_PM_RUNTIME +static int bmc150_accel_runtime_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct bmc150_accel_data *data = iio_priv(indio_dev); + + dev_dbg(&data->client->dev, __func__); + + return bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_SUSPEND, 0); +} + +static int bmc150_accel_runtime_resume(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct bmc150_accel_data *data = iio_priv(indio_dev); + int ret; + int sleep_val; + + dev_dbg(&data->client->dev, __func__); + + ret = bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_NORMAL, 0); + if (ret < 0) + return ret; + + sleep_val = bmc150_accel_get_startup_times(data); + if (sleep_val < 20) + usleep_range(sleep_val * 1000, 20000); + else + msleep_interruptible(sleep_val); + + return 0; +} +#endif + +static const struct dev_pm_ops bmc150_accel_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(bmc150_accel_suspend, bmc150_accel_resume) + SET_RUNTIME_PM_OPS(bmc150_accel_runtime_suspend, + bmc150_accel_runtime_resume, NULL) +}; + +static const struct acpi_device_id bmc150_accel_acpi_match[] = { + {"BSBA0150", 0}, + {"BMC150A", 0}, + { }, +}; +MODULE_DEVICE_TABLE(acpi, bmc150_accel_acpi_match); + +static const struct i2c_device_id bmc150_accel_id[] = { + {"bmc150_accel", 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, bmc150_accel_id); + +static struct i2c_driver bmc150_accel_driver = { + .driver = { + .name = BMC150_ACCEL_DRV_NAME, + .acpi_match_table = ACPI_PTR(bmc150_accel_acpi_match), + .pm = &bmc150_accel_pm_ops, + }, + .probe = bmc150_accel_probe, + .remove = bmc150_accel_remove, + .id_table = bmc150_accel_id, +}; +module_i2c_driver(bmc150_accel_driver); + +MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("BMC150 accelerometer driver"); |