summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/usb/dwc2.txt5
-rw-r--r--drivers/usb/dwc2/core.c11
-rw-r--r--drivers/usb/dwc2/core.h7
-rw-r--r--drivers/usb/dwc2/gadget.c53
-rw-r--r--drivers/usb/dwc3/gadget.c26
-rw-r--r--drivers/usb/gadget/function/f_fs.c107
-rw-r--r--drivers/usb/gadget/function/u_ether.c5
-rw-r--r--drivers/usb/gadget/udc/atmel_usba_udc.c2
8 files changed, 174 insertions, 42 deletions
diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
index 455f2c310a1b..2c30a5479069 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.txt
+++ b/Documentation/devicetree/bindings/usb/dwc2.txt
@@ -28,10 +28,7 @@ Refer to phy/phy-bindings.txt for generic phy consumer properties
- g-use-dma: enable dma usage in gadget driver.
- g-rx-fifo-size: size of rx fifo size in gadget mode.
- g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode.
-
-Deprecated properties:
-- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0)
- in gadget mode.
+- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
Example:
diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
index fa9b26b91507..4c0fa0b17353 100644
--- a/drivers/usb/dwc2/core.c
+++ b/drivers/usb/dwc2/core.c
@@ -463,9 +463,18 @@ static void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg)
*/
void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg)
{
+ bool ret;
+
switch (hsotg->dr_mode) {
case USB_DR_MODE_HOST:
- dwc2_force_mode(hsotg, true);
+ ret = dwc2_force_mode(hsotg, true);
+ /*
+ * NOTE: This is required for some rockchip soc based
+ * platforms on their host-only dwc2.
+ */
+ if (!ret)
+ msleep(50);
+
break;
case USB_DR_MODE_PERIPHERAL:
dwc2_force_mode(hsotg, false);
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index aad4107ef927..2a21a0414b1d 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -259,6 +259,13 @@ enum dwc2_lx_state {
DWC2_L3, /* Off state */
};
+/*
+ * Gadget periodic tx fifo sizes as used by legacy driver
+ * EP0 is not included
+ */
+#define DWC2_G_P_LEGACY_TX_FIFO_SIZE {256, 256, 256, 256, 768, 768, 768, \
+ 768, 0, 0, 0, 0, 0, 0, 0}
+
/* Gadget ep0 states */
enum dwc2_ep0_state {
DWC2_EP0_SETUP,
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 4cd6403a7566..24fbebc9b409 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -186,10 +186,9 @@ static void dwc2_hsotg_ctrl_epint(struct dwc2_hsotg *hsotg,
*/
static void dwc2_hsotg_init_fifo(struct dwc2_hsotg *hsotg)
{
- unsigned int fifo;
+ unsigned int ep;
unsigned int addr;
int timeout;
- u32 dptxfsizn;
u32 val;
/* Reset fifo map if not correctly cleared during previous session */
@@ -217,16 +216,16 @@ static void dwc2_hsotg_init_fifo(struct dwc2_hsotg *hsotg)
* them to endpoints dynamically according to maxpacket size value of
* given endpoint.
*/
- for (fifo = 1; fifo < MAX_EPS_CHANNELS; fifo++) {
- dptxfsizn = dwc2_readl(hsotg->regs + DPTXFSIZN(fifo));
-
- val = (dptxfsizn & FIFOSIZE_DEPTH_MASK) | addr;
- addr += dptxfsizn >> FIFOSIZE_DEPTH_SHIFT;
-
- if (addr > hsotg->fifo_mem)
- break;
+ for (ep = 1; ep < MAX_EPS_CHANNELS; ep++) {
+ if (!hsotg->g_tx_fifo_sz[ep])
+ continue;
+ val = addr;
+ val |= hsotg->g_tx_fifo_sz[ep] << FIFOSIZE_DEPTH_SHIFT;
+ WARN_ONCE(addr + hsotg->g_tx_fifo_sz[ep] > hsotg->fifo_mem,
+ "insufficient fifo memory");
+ addr += hsotg->g_tx_fifo_sz[ep];
- dwc2_writel(val, hsotg->regs + DPTXFSIZN(fifo));
+ dwc2_writel(val, hsotg->regs + DPTXFSIZN(ep));
}
/*
@@ -3807,10 +3806,36 @@ static void dwc2_hsotg_dump(struct dwc2_hsotg *hsotg)
static void dwc2_hsotg_of_probe(struct dwc2_hsotg *hsotg)
{
struct device_node *np = hsotg->dev->of_node;
+ u32 len = 0;
+ u32 i = 0;
/* Enable dma if requested in device tree */
hsotg->g_using_dma = of_property_read_bool(np, "g-use-dma");
+ /*
+ * Register TX periodic fifo size per endpoint.
+ * EP0 is excluded since it has no fifo configuration.
+ */
+ if (!of_find_property(np, "g-tx-fifo-size", &len))
+ goto rx_fifo;
+
+ len /= sizeof(u32);
+
+ /* Read tx fifo sizes other than ep0 */
+ if (of_property_read_u32_array(np, "g-tx-fifo-size",
+ &hsotg->g_tx_fifo_sz[1], len))
+ goto rx_fifo;
+
+ /* Add ep0 */
+ len++;
+
+ /* Make remaining TX fifos unavailable */
+ if (len < MAX_EPS_CHANNELS) {
+ for (i = len; i < MAX_EPS_CHANNELS; i++)
+ hsotg->g_tx_fifo_sz[i] = 0;
+ }
+
+rx_fifo:
/* Register RX fifo size */
of_property_read_u32(np, "g-rx-fifo-size", &hsotg->g_rx_fifo_sz);
@@ -3832,10 +3857,13 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq)
struct device *dev = hsotg->dev;
int epnum;
int ret;
+ int i;
+ u32 p_tx_fifo[] = DWC2_G_P_LEGACY_TX_FIFO_SIZE;
/* Initialize to legacy fifo configuration values */
hsotg->g_rx_fifo_sz = 2048;
hsotg->g_np_g_tx_fifo_sz = 1024;
+ memcpy(&hsotg->g_tx_fifo_sz[1], p_tx_fifo, sizeof(p_tx_fifo));
/* Device tree specific probe */
dwc2_hsotg_of_probe(hsotg);
@@ -3853,6 +3881,9 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq)
dev_dbg(dev, "NonPeriodic TXFIFO size: %d\n",
hsotg->g_np_g_tx_fifo_sz);
dev_dbg(dev, "RXFIFO size: %d\n", hsotg->g_rx_fifo_sz);
+ for (i = 0; i < MAX_EPS_CHANNELS; i++)
+ dev_dbg(dev, "Periodic TXFIFO%2d size: %d\n", i,
+ hsotg->g_tx_fifo_sz[i]);
hsotg->gadget.max_speed = USB_SPEED_HIGH;
hsotg->gadget.ops = &dwc2_hsotg_gadget_ops;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 07cc8929f271..1dfa56a5f1c5 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -783,6 +783,7 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
req->trb = trb;
req->trb_dma = dwc3_trb_dma_offset(dep, trb);
req->first_trb_index = dep->trb_enqueue;
+ dep->queued_requests++;
}
dwc3_ep_inc_enq(dep);
@@ -833,8 +834,6 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
trb->ctrl |= DWC3_TRB_CTRL_HWO;
- dep->queued_requests++;
-
trace_dwc3_prepare_trb(dep, trb);
}
@@ -1074,9 +1073,17 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
list_add_tail(&req->list, &dep->pending_list);
- if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
- dep->flags & DWC3_EP_PENDING_REQUEST) {
- if (list_empty(&dep->started_list)) {
+ /*
+ * NOTICE: Isochronous endpoints should NEVER be prestarted. We must
+ * wait for a XferNotReady event so we will know what's the current
+ * (micro-)frame number.
+ *
+ * Without this trick, we are very, very likely gonna get Bus Expiry
+ * errors which will force us issue EndTransfer command.
+ */
+ if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
+ if ((dep->flags & DWC3_EP_PENDING_REQUEST) &&
+ list_empty(&dep->started_list)) {
dwc3_stop_active_transfer(dwc, dep->number, true);
dep->flags = DWC3_EP_ENABLED;
}
@@ -1861,8 +1868,11 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep,
unsigned int s_pkt = 0;
unsigned int trb_status;
- dep->queued_requests--;
dwc3_ep_inc_deq(dep);
+
+ if (req->trb == trb)
+ dep->queued_requests--;
+
trace_dwc3_complete_trb(dep, trb);
/*
@@ -2980,7 +2990,7 @@ err3:
kfree(dwc->setup_buf);
err2:
- dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb),
+ dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb) * 2,
dwc->ep0_trb, dwc->ep0_trb_addr);
err1:
@@ -3005,7 +3015,7 @@ void dwc3_gadget_exit(struct dwc3 *dwc)
kfree(dwc->setup_buf);
kfree(dwc->zlp_buf);
- dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb),
+ dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb) * 2,
dwc->ep0_trb, dwc->ep0_trb_addr);
dma_free_coherent(dwc->dev, sizeof(*dwc->ctrl_req),
diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index 54ad100af35b..e40d47d47d82 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -136,8 +136,60 @@ struct ffs_epfile {
/*
* Buffer for holding data from partial reads which may happen since
* we’re rounding user read requests to a multiple of a max packet size.
+ *
+ * The pointer is initialised with NULL value and may be set by
+ * __ffs_epfile_read_data function to point to a temporary buffer.
+ *
+ * In normal operation, calls to __ffs_epfile_read_buffered will consume
+ * data from said buffer and eventually free it. Importantly, while the
+ * function is using the buffer, it sets the pointer to NULL. This is
+ * all right since __ffs_epfile_read_data and __ffs_epfile_read_buffered
+ * can never run concurrently (they are synchronised by epfile->mutex)
+ * so the latter will not assign a new value to the pointer.
+ *
+ * Meanwhile ffs_func_eps_disable frees the buffer (if the pointer is
+ * valid) and sets the pointer to READ_BUFFER_DROP value. This special
+ * value is crux of the synchronisation between ffs_func_eps_disable and
+ * __ffs_epfile_read_data.
+ *
+ * Once __ffs_epfile_read_data is about to finish it will try to set the
+ * pointer back to its old value (as described above), but seeing as the
+ * pointer is not-NULL (namely READ_BUFFER_DROP) it will instead free
+ * the buffer.
+ *
+ * == State transitions ==
+ *
+ * • ptr == NULL: (initial state)
+ * ◦ __ffs_epfile_read_buffer_free: go to ptr == DROP
+ * ◦ __ffs_epfile_read_buffered: nop
+ * ◦ __ffs_epfile_read_data allocates temp buffer: go to ptr == buf
+ * ◦ reading finishes: n/a, not in ‘and reading’ state
+ * • ptr == DROP:
+ * ◦ __ffs_epfile_read_buffer_free: nop
+ * ◦ __ffs_epfile_read_buffered: go to ptr == NULL
+ * ◦ __ffs_epfile_read_data allocates temp buffer: free buf, nop
+ * ◦ reading finishes: n/a, not in ‘and reading’ state
+ * • ptr == buf:
+ * ◦ __ffs_epfile_read_buffer_free: free buf, go to ptr == DROP
+ * ◦ __ffs_epfile_read_buffered: go to ptr == NULL and reading
+ * ◦ __ffs_epfile_read_data: n/a, __ffs_epfile_read_buffered
+ * is always called first
+ * ◦ reading finishes: n/a, not in ‘and reading’ state
+ * • ptr == NULL and reading:
+ * ◦ __ffs_epfile_read_buffer_free: go to ptr == DROP and reading
+ * ◦ __ffs_epfile_read_buffered: n/a, mutex is held
+ * ◦ __ffs_epfile_read_data: n/a, mutex is held
+ * ◦ reading finishes and …
+ * … all data read: free buf, go to ptr == NULL
+ * … otherwise: go to ptr == buf and reading
+ * • ptr == DROP and reading:
+ * ◦ __ffs_epfile_read_buffer_free: nop
+ * ◦ __ffs_epfile_read_buffered: n/a, mutex is held
+ * ◦ __ffs_epfile_read_data: n/a, mutex is held
+ * ◦ reading finishes: free buf, go to ptr == DROP
*/
- struct ffs_buffer *read_buffer; /* P: epfile->mutex */
+ struct ffs_buffer *read_buffer;
+#define READ_BUFFER_DROP ((struct ffs_buffer *)ERR_PTR(-ESHUTDOWN))
char name[5];
@@ -736,25 +788,47 @@ static void ffs_epfile_async_io_complete(struct usb_ep *_ep,
schedule_work(&io_data->work);
}
+static void __ffs_epfile_read_buffer_free(struct ffs_epfile *epfile)
+{
+ /*
+ * See comment in struct ffs_epfile for full read_buffer pointer
+ * synchronisation story.
+ */
+ struct ffs_buffer *buf = xchg(&epfile->read_buffer, READ_BUFFER_DROP);
+ if (buf && buf != READ_BUFFER_DROP)
+ kfree(buf);
+}
+
/* Assumes epfile->mutex is held. */
static ssize_t __ffs_epfile_read_buffered(struct ffs_epfile *epfile,
struct iov_iter *iter)
{
- struct ffs_buffer *buf = epfile->read_buffer;
+ /*
+ * Null out epfile->read_buffer so ffs_func_eps_disable does not free
+ * the buffer while we are using it. See comment in struct ffs_epfile
+ * for full read_buffer pointer synchronisation story.
+ */
+ struct ffs_buffer *buf = xchg(&epfile->read_buffer, NULL);
ssize_t ret;
- if (!buf)
+ if (!buf || buf == READ_BUFFER_DROP)
return 0;
ret = copy_to_iter(buf->data, buf->length, iter);
if (buf->length == ret) {
kfree(buf);
- epfile->read_buffer = NULL;
- } else if (unlikely(iov_iter_count(iter))) {
+ return ret;
+ }
+
+ if (unlikely(iov_iter_count(iter))) {
ret = -EFAULT;
} else {
buf->length -= ret;
buf->data += ret;
}
+
+ if (cmpxchg(&epfile->read_buffer, NULL, buf))
+ kfree(buf);
+
return ret;
}
@@ -783,7 +857,15 @@ static ssize_t __ffs_epfile_read_data(struct ffs_epfile *epfile,
buf->length = data_len;
buf->data = buf->storage;
memcpy(buf->storage, data + ret, data_len);
- epfile->read_buffer = buf;
+
+ /*
+ * At this point read_buffer is NULL or READ_BUFFER_DROP (if
+ * ffs_func_eps_disable has been called in the meanwhile). See comment
+ * in struct ffs_epfile for full read_buffer pointer synchronisation
+ * story.
+ */
+ if (unlikely(cmpxchg(&epfile->read_buffer, NULL, buf)))
+ kfree(buf);
return ret;
}
@@ -1097,8 +1179,7 @@ ffs_epfile_release(struct inode *inode, struct file *file)
ENTER();
- kfree(epfile->read_buffer);
- epfile->read_buffer = NULL;
+ __ffs_epfile_read_buffer_free(epfile);
ffs_data_closed(epfile->ffs);
return 0;
@@ -1724,24 +1805,20 @@ static void ffs_func_eps_disable(struct ffs_function *func)
unsigned count = func->ffs->eps_count;
unsigned long flags;
+ spin_lock_irqsave(&func->ffs->eps_lock, flags);
do {
- if (epfile)
- mutex_lock(&epfile->mutex);
- spin_lock_irqsave(&func->ffs->eps_lock, flags);
/* pending requests get nuked */
if (likely(ep->ep))
usb_ep_disable(ep->ep);
++ep;
- spin_unlock_irqrestore(&func->ffs->eps_lock, flags);
if (epfile) {
epfile->ep = NULL;
- kfree(epfile->read_buffer);
- epfile->read_buffer = NULL;
- mutex_unlock(&epfile->mutex);
+ __ffs_epfile_read_buffer_free(epfile);
++epfile;
}
} while (--count);
+ spin_unlock_irqrestore(&func->ffs->eps_lock, flags);
}
static int ffs_func_eps_enable(struct ffs_function *func)
diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c
index 9c8c9ed1dc9e..fe1811650dbc 100644
--- a/drivers/usb/gadget/function/u_ether.c
+++ b/drivers/usb/gadget/function/u_ether.c
@@ -590,8 +590,9 @@ static netdev_tx_t eth_start_xmit(struct sk_buff *skb,
/* throttle high/super speed IRQ rate back slightly */
if (gadget_is_dualspeed(dev->gadget))
- req->no_interrupt = (dev->gadget->speed == USB_SPEED_HIGH ||
- dev->gadget->speed == USB_SPEED_SUPER)
+ req->no_interrupt = (((dev->gadget->speed == USB_SPEED_HIGH ||
+ dev->gadget->speed == USB_SPEED_SUPER)) &&
+ !list_empty(&dev->tx_reqs))
? ((atomic_read(&dev->tx_qlen) % dev->qmult) != 0)
: 0;
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index bb1f6c8f0f01..45bc997d0711 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -1978,7 +1978,7 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev,
dev_err(&pdev->dev, "of_probe: name error(%d)\n", ret);
goto err;
}
- ep->ep.name = name;
+ ep->ep.name = kasprintf(GFP_KERNEL, "ep%d", ep->index);
ep->ep_regs = udc->regs + USBA_EPT_BASE(i);
ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-25 21:25:50 +0300