diff options
-rw-r--r-- | Documentation/scsi/g_NCR5380.txt | 46 | ||||
-rw-r--r-- | drivers/scsi/g_NCR5380.c | 30 |
2 files changed, 41 insertions, 35 deletions
diff --git a/Documentation/scsi/g_NCR5380.txt b/Documentation/scsi/g_NCR5380.txt index e2c187947e58..37b1967a00a9 100644 --- a/Documentation/scsi/g_NCR5380.txt +++ b/Documentation/scsi/g_NCR5380.txt @@ -6,17 +6,15 @@ NCR53c400 extensions (c) 1994,1995,1996 Kevin Lentin This file documents the NCR53c400 extensions by Kevin Lentin and some enhancements to the NCR5380 core. -This driver supports both NCR5380 and NCR53c400 cards in port or memory -mapped modes. Currently this driver can only support one of those mapping -modes at a time but it does support both of these chips at the same time. -The next release of this driver will support port & memory mapped cards at -the same time. It should be able to handle multiple different cards in the -same machine. +This driver supports NCR5380 and NCR53c400 and compatible cards in port or +memory mapped modes. -The drivers/scsi/Makefile has an override in it for the most common -NCR53c400 card, the Trantor T130B in its default configuration: - Port: 0x350 - IRQ : 5 +Use of an interrupt is recommended, if supported by the board, as this will +allow targets to disconnect and thereby improve SCSI bus utilization. + +If the irq parameter is 254 or is omitted entirely, the driver will probe +for the correct IRQ line automatically. If the irq parameter is 0 or 255 +then no IRQ will be used. The NCR53c400 does not support DMA but it does have Pseudo-DMA which is supported by the driver. @@ -47,22 +45,24 @@ These old-style parameters can support only one card: dtc_3181e=1 to set up for a Domex Technology Corp 3181E board hp_c2502=1 to set up for a Hewlett Packard C2502 board -e.g. -OLD: modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_5380=1 -NEW: modprobe g_NCR5380 irq=5 base=0x350 card=0 - for a port mapped NCR5380 board or - -OLD: modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1 -NEW: modprobe g_NCR5380 irq=255 base=0xc8000 card=1 - for a memory mapped NCR53C400 board with interrupts disabled or +E.g. Trantor T130B in its default configuration: +modprobe g_NCR5380 irq=5 base=0x350 card=1 +or alternatively, using the old syntax, +modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_53c400=1 -NEW: modprobe g_NCR5380 irq=0,7 base=0x240,0x300 card=3,4 - for two cards: DTC3181 (in non-PnP mode) at 0x240 with no IRQ - and HP C2502 at 0x300 with IRQ 7 +E.g. a port mapped NCR5380 board, driver to probe for IRQ: +modprobe g_NCR5380 base=0x350 card=0 +or alternatively, +modprobe g_NCR5380 ncr_addr=0x350 ncr_5380=1 -(255 should be specified for no or DMA interrupt, 254 to autoprobe for an - IRQ line if overridden on the command line.) +E.g. a memory mapped NCR53C400 board with no IRQ: +modprobe g_NCR5380 irq=255 base=0xc8000 card=1 +or alternatively, +modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1 +E.g. two cards, DTC3181 (in non-PnP mode) at 0x240 with no IRQ +and HP C2502 at 0x300 with IRQ 7: +modprobe g_NCR5380 irq=0,7 base=0x240,0x300 card=3,4 Kevin Lentin K.Lentin@cs.monash.edu.au diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c index 58a0b826eb51..6f9665d50d84 100644 --- a/drivers/scsi/g_NCR5380.c +++ b/drivers/scsi/g_NCR5380.c @@ -37,7 +37,7 @@ #define MAX_CARDS 8 /* old-style parameters for compatibility */ -static int ncr_irq; +static int ncr_irq = -1; static int ncr_addr; static int ncr_5380; static int ncr_53c400; @@ -52,9 +52,9 @@ module_param(ncr_53c400a, int, 0); module_param(dtc_3181e, int, 0); module_param(hp_c2502, int, 0); -static int irq[] = { 0, 0, 0, 0, 0, 0, 0, 0 }; +static int irq[] = { -1, -1, -1, -1, -1, -1, -1, -1 }; module_param_array(irq, int, NULL, 0); -MODULE_PARM_DESC(irq, "IRQ number(s)"); +MODULE_PARM_DESC(irq, "IRQ number(s) (0=none, 254=auto [default])"); static int base[] = { 0, 0, 0, 0, 0, 0, 0, 0 }; module_param_array(base, int, NULL, 0); @@ -344,6 +344,8 @@ static int generic_NCR5380_init_one(struct scsi_host_template *tpnt, /* Compatibility with documented NCR5380 kernel parameters */ if (irq == 255 || irq == 0) irq = NO_IRQ; + else if (irq == -1) + irq = IRQ_AUTO; if (board == BOARD_HP_C2502) { int *irq_table = hp_c2502_irqs; @@ -370,24 +372,28 @@ static int generic_NCR5380_init_one(struct scsi_host_template *tpnt, magic_configure(port_idx, board_irq, magic); } - if (irq == IRQ_AUTO) + if (irq == IRQ_AUTO) { instance->irq = g_NCR5380_probe_irq(instance); - else + if (instance->irq == NO_IRQ) + shost_printk(KERN_INFO, instance, "no irq detected\n"); + } else { instance->irq = irq; + if (instance->irq == NO_IRQ) + shost_printk(KERN_INFO, instance, "no irq provided\n"); + } if (instance->irq != NO_IRQ) { if (request_irq(instance->irq, generic_NCR5380_intr, 0, "NCR5380", instance)) { - printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq); instance->irq = NO_IRQ; + shost_printk(KERN_INFO, instance, + "irq %d denied\n", instance->irq); + } else { + shost_printk(KERN_INFO, instance, + "irq %d acquired\n", instance->irq); } } - if (instance->irq == NO_IRQ) { - printk(KERN_INFO "scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no); - printk(KERN_INFO "scsi%d : please jumper the board for a free IRQ.\n", instance->host_no); - } - ret = scsi_add_host(instance, pdev); if (ret) goto out_free_irq; @@ -698,7 +704,7 @@ static int __init generic_NCR5380_init(void) int ret = 0; /* compatibility with old-style parameters */ - if (irq[0] == 0 && base[0] == 0 && card[0] == -1) { + if (irq[0] == -1 && base[0] == 0 && card[0] == -1) { irq[0] = ncr_irq; base[0] = ncr_addr; if (ncr_5380) |