diff options
-rw-r--r-- | drivers/gpu/drm/panel/Kconfig | 10 | ||||
-rw-r--r-- | drivers/gpu/drm/panel/Makefile | 1 | ||||
-rw-r--r-- | drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.c | 334 |
3 files changed, 345 insertions, 0 deletions
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index 7d4704b1292b..15a396014a59 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -31,6 +31,16 @@ config DRM_PANEL_LG_LG4573 Say Y here if you want to enable support for LG4573 RGB panel. To compile this driver as a module, choose M here. +config DRM_PANEL_PANASONIC_VVX10F034N00 + tristate "Panasonic VVX10F034N00 1920x1200 video mode panel" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to enable support for Panasonic VVX10F034N00 + WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some + Xperia Z2 tablets + config DRM_PANEL_SAMSUNG_S6E8AA0 tristate "Samsung S6E8AA0 DSI video mode panel" depends on OF diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index d0f016dd7ddb..053287a72825 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -1,5 +1,6 @@ obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o +obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o diff --git a/drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.c b/drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.c new file mode 100644 index 000000000000..7f915f706fa6 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.c @@ -0,0 +1,334 @@ +/* + * Copyright (C) 2015 Red Hat + * Copyright (C) 2015 Sony Mobile Communications Inc. + * Author: Werner Johansson <werner.johansson@sonymobile.com> + * + * Based on AUO panel driver by Rob Clark <robdclark@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/backlight.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regulator/consumer.h> + +#include <drm/drmP.h> +#include <drm/drm_crtc.h> +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_panel.h> + +#include <video/mipi_display.h> + +/* + * When power is turned off to this panel a minimum off time of 500ms has to be + * observed before powering back on as there's no external reset pin. Keep + * track of earliest wakeup time and delay subsequent prepare call accordingly + */ +#define MIN_POFF_MS (500) + +struct wuxga_nt_panel { + struct drm_panel base; + struct mipi_dsi_device *dsi; + + struct backlight_device *backlight; + struct regulator *supply; + + bool prepared; + bool enabled; + + ktime_t earliest_wake; + + const struct drm_display_mode *mode; +}; + +static inline struct wuxga_nt_panel *to_wuxga_nt_panel(struct drm_panel *panel) +{ + return container_of(panel, struct wuxga_nt_panel, base); +} + +static int wuxga_nt_panel_on(struct wuxga_nt_panel *wuxga_nt) +{ + struct mipi_dsi_device *dsi = wuxga_nt->dsi; + int ret; + + ret = mipi_dsi_turn_on_peripheral(dsi); + if (ret < 0) + return ret; + + return 0; +} + +static int wuxga_nt_panel_disable(struct drm_panel *panel) +{ + struct wuxga_nt_panel *wuxga_nt = to_wuxga_nt_panel(panel); + + if (!wuxga_nt->enabled) + return 0; + + mipi_dsi_shutdown_peripheral(wuxga_nt->dsi); + + if (wuxga_nt->backlight) { + wuxga_nt->backlight->props.power = FB_BLANK_POWERDOWN; + wuxga_nt->backlight->props.state |= BL_CORE_FBBLANK; + backlight_update_status(wuxga_nt->backlight); + } + + wuxga_nt->enabled = false; + + return 0; +} + +static int wuxga_nt_panel_unprepare(struct drm_panel *panel) +{ + struct wuxga_nt_panel *wuxga_nt = to_wuxga_nt_panel(panel); + + if (!wuxga_nt->prepared) + return 0; + + regulator_disable(wuxga_nt->supply); + wuxga_nt->earliest_wake = ktime_add_ms(ktime_get_real(), MIN_POFF_MS); + wuxga_nt->prepared = false; + + return 0; +} + +static int wuxga_nt_panel_prepare(struct drm_panel *panel) +{ + struct wuxga_nt_panel *wuxga_nt = to_wuxga_nt_panel(panel); + int ret; + s64 enablewait; + + if (wuxga_nt->prepared) + return 0; + + /* + * If the user re-enabled the panel before the required off-time then + * we need to wait the remaining period before re-enabling regulator + */ + enablewait = ktime_ms_delta(wuxga_nt->earliest_wake, ktime_get_real()); + + /* Sanity check, this should never happen */ + if (enablewait > MIN_POFF_MS) + enablewait = MIN_POFF_MS; + + if (enablewait > 0) + msleep(enablewait); + + ret = regulator_enable(wuxga_nt->supply); + if (ret < 0) + return ret; + + /* + * A minimum delay of 250ms is required after power-up until commands + * can be sent + */ + msleep(250); + + ret = wuxga_nt_panel_on(wuxga_nt); + if (ret < 0) { + dev_err(panel->dev, "failed to set panel on: %d\n", ret); + goto poweroff; + } + + wuxga_nt->prepared = true; + + return 0; + +poweroff: + regulator_disable(wuxga_nt->supply); + + return ret; +} + +static int wuxga_nt_panel_enable(struct drm_panel *panel) +{ + struct wuxga_nt_panel *wuxga_nt = to_wuxga_nt_panel(panel); + + if (wuxga_nt->enabled) + return 0; + + if (wuxga_nt->backlight) { + wuxga_nt->backlight->props.power = FB_BLANK_UNBLANK; + wuxga_nt->backlight->props.state &= ~BL_CORE_FBBLANK; + backlight_update_status(wuxga_nt->backlight); + } + + wuxga_nt->enabled = true; + + return 0; +} + +static const struct drm_display_mode default_mode = { + .clock = 164402, + .hdisplay = 1920, + .hsync_start = 1920 + 152, + .hsync_end = 1920 + 152 + 52, + .htotal = 1920 + 152 + 52 + 20, + .vdisplay = 1200, + .vsync_start = 1200 + 24, + .vsync_end = 1200 + 24 + 6, + .vtotal = 1200 + 24 + 6 + 48, + .vrefresh = 60, +}; + +static int wuxga_nt_panel_get_modes(struct drm_panel *panel) +{ + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(panel->drm, &default_mode); + if (!mode) { + dev_err(panel->drm->dev, "failed to add mode %ux%ux@%u\n", + default_mode.hdisplay, default_mode.vdisplay, + default_mode.vrefresh); + return -ENOMEM; + } + + drm_mode_set_name(mode); + + drm_mode_probed_add(panel->connector, mode); + + panel->connector->display_info.width_mm = 217; + panel->connector->display_info.height_mm = 136; + + return 1; +} + +static const struct drm_panel_funcs wuxga_nt_panel_funcs = { + .disable = wuxga_nt_panel_disable, + .unprepare = wuxga_nt_panel_unprepare, + .prepare = wuxga_nt_panel_prepare, + .enable = wuxga_nt_panel_enable, + .get_modes = wuxga_nt_panel_get_modes, +}; + +static const struct of_device_id wuxga_nt_of_match[] = { + { .compatible = "panasonic,vvx10f034n00", }, + { } +}; +MODULE_DEVICE_TABLE(of, wuxga_nt_of_match); + +static int wuxga_nt_panel_add(struct wuxga_nt_panel *wuxga_nt) +{ + struct device *dev = &wuxga_nt->dsi->dev; + struct device_node *np; + int ret; + + wuxga_nt->mode = &default_mode; + + wuxga_nt->supply = devm_regulator_get(dev, "power"); + if (IS_ERR(wuxga_nt->supply)) + return PTR_ERR(wuxga_nt->supply); + + np = of_parse_phandle(dev->of_node, "backlight", 0); + if (np) { + wuxga_nt->backlight = of_find_backlight_by_node(np); + of_node_put(np); + + if (!wuxga_nt->backlight) + return -EPROBE_DEFER; + } + + drm_panel_init(&wuxga_nt->base); + wuxga_nt->base.funcs = &wuxga_nt_panel_funcs; + wuxga_nt->base.dev = &wuxga_nt->dsi->dev; + + ret = drm_panel_add(&wuxga_nt->base); + if (ret < 0) + goto put_backlight; + + return 0; + +put_backlight: + if (wuxga_nt->backlight) + put_device(&wuxga_nt->backlight->dev); + + return ret; +} + +static void wuxga_nt_panel_del(struct wuxga_nt_panel *wuxga_nt) +{ + if (wuxga_nt->base.dev) + drm_panel_remove(&wuxga_nt->base); + + if (wuxga_nt->backlight) + put_device(&wuxga_nt->backlight->dev); +} + +static int wuxga_nt_panel_probe(struct mipi_dsi_device *dsi) +{ + struct wuxga_nt_panel *wuxga_nt; + int ret; + + dsi->lanes = 4; + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | + MIPI_DSI_MODE_VIDEO_HSE | + MIPI_DSI_CLOCK_NON_CONTINUOUS | + MIPI_DSI_MODE_LPM; + + wuxga_nt = devm_kzalloc(&dsi->dev, sizeof(*wuxga_nt), GFP_KERNEL); + if (!wuxga_nt) + return -ENOMEM; + + mipi_dsi_set_drvdata(dsi, wuxga_nt); + + wuxga_nt->dsi = dsi; + + ret = wuxga_nt_panel_add(wuxga_nt); + if (ret < 0) + return ret; + + return mipi_dsi_attach(dsi); +} + +static int wuxga_nt_panel_remove(struct mipi_dsi_device *dsi) +{ + struct wuxga_nt_panel *wuxga_nt = mipi_dsi_get_drvdata(dsi); + int ret; + + ret = wuxga_nt_panel_disable(&wuxga_nt->base); + if (ret < 0) + dev_err(&dsi->dev, "failed to disable panel: %d\n", ret); + + ret = mipi_dsi_detach(dsi); + if (ret < 0) + dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret); + + drm_panel_detach(&wuxga_nt->base); + wuxga_nt_panel_del(wuxga_nt); + + return 0; +} + +static void wuxga_nt_panel_shutdown(struct mipi_dsi_device *dsi) +{ + struct wuxga_nt_panel *wuxga_nt = mipi_dsi_get_drvdata(dsi); + + wuxga_nt_panel_disable(&wuxga_nt->base); +} + +static struct mipi_dsi_driver wuxga_nt_panel_driver = { + .driver = { + .name = "panel-panasonic-vvx10f034n00", + .of_match_table = wuxga_nt_of_match, + }, + .probe = wuxga_nt_panel_probe, + .remove = wuxga_nt_panel_remove, + .shutdown = wuxga_nt_panel_shutdown, +}; +module_mipi_dsi_driver(wuxga_nt_panel_driver); + +MODULE_AUTHOR("Werner Johansson <werner.johansson@sonymobile.com>"); +MODULE_DESCRIPTION("Panasonic VVX10F034N00 Novatek NT1397-based WUXGA (1920x1200) video mode panel driver"); +MODULE_LICENSE("GPL v2"); |