diff options
| -rw-r--r-- | Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt | 45 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/gpio/gpio-tz1090.txt | 88 | ||||
| -rw-r--r-- | drivers/gpio/Kconfig | 15 | ||||
| -rw-r--r-- | drivers/gpio/Makefile | 2 | ||||
| -rw-r--r-- | drivers/gpio/gpio-tz1090-pdc.c | 231 | ||||
| -rw-r--r-- | drivers/gpio/gpio-tz1090.c | 602 |
6 files changed, 0 insertions, 983 deletions
diff --git a/Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt b/Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt deleted file mode 100644 index 528f5ef5a893..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt +++ /dev/null @@ -1,45 +0,0 @@ -ImgTec TZ1090 PDC GPIO Controller - -Required properties: -- compatible: Compatible property value should be "img,tz1090-pdc-gpio". - -- reg: Physical base address of the controller and length of memory mapped - region. This starts at and cover the SOC_GPIO_CONTROL registers. - -- gpio-controller: Specifies that the node is a gpio controller. - -- #gpio-cells: Should be 2. The syntax of the gpio specifier used by client - nodes should have the following values. - <[phandle of the gpio controller node] - [PDC gpio number] - [gpio flags]> - - Values for gpio specifier: - - GPIO number: a value in the range 0 to 6. - - GPIO flags: bit field of flags, as defined in <dt-bindings/gpio/gpio.h>. - Only the following flags are supported: - GPIO_ACTIVE_HIGH - GPIO_ACTIVE_LOW - -Optional properties: -- gpio-ranges: Mapping to pin controller pins (as described in - Documentation/devicetree/bindings/gpio/gpio.txt) - -- interrupts: Individual syswake interrupts (other GPIOs cannot interrupt) - - -Example: - - pdc_gpios: gpio-controller@2006500 { - gpio-controller; - #gpio-cells = <2>; - - compatible = "img,tz1090-pdc-gpio"; - reg = <0x02006500 0x100>; - - interrupt-parent = <&pdc>; - interrupts = <8 IRQ_TYPE_NONE>, /* Syswake 0 */ - <9 IRQ_TYPE_NONE>, /* Syswake 1 */ - <10 IRQ_TYPE_NONE>; /* Syswake 2 */ - gpio-ranges = <&pdc_pinctrl 0 0 7>; - }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-tz1090.txt b/Documentation/devicetree/bindings/gpio/gpio-tz1090.txt deleted file mode 100644 index b05a90e0ab29..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-tz1090.txt +++ /dev/null @@ -1,88 +0,0 @@ -ImgTec TZ1090 GPIO Controller - -Required properties: -- compatible: Compatible property value should be "img,tz1090-gpio". - -- reg: Physical base address of the controller and length of memory mapped - region. - -- #address-cells: Should be 1 (for bank subnodes) - -- #size-cells: Should be 0 (for bank subnodes) - -- Each bank of GPIOs should have a subnode to represent it. - - Bank subnode required properties: - - reg: Index of bank in the range 0 to 2. - - - gpio-controller: Specifies that the node is a gpio controller. - - - #gpio-cells: Should be 2. The syntax of the gpio specifier used by client - nodes should have the following values. - <[phandle of the gpio controller node] - [gpio number within the gpio bank] - [gpio flags]> - - Values for gpio specifier: - - GPIO number: a value in the range 0 to 29. - - GPIO flags: bit field of flags, as defined in <dt-bindings/gpio/gpio.h>. - Only the following flags are supported: - GPIO_ACTIVE_HIGH - GPIO_ACTIVE_LOW - - Bank subnode optional properties: - - gpio-ranges: Mapping to pin controller pins (as described in - Documentation/devicetree/bindings/gpio/gpio.txt) - - - interrupts: Interrupt for the entire bank - - - interrupt-controller: Specifies that the node is an interrupt controller - - - #interrupt-cells: Should be 2. The syntax of the interrupt specifier used by - client nodes should have the following values. - <[phandle of the interurupt controller] - [gpio number within the gpio bank] - [irq flags]> - - Values for irq specifier: - - GPIO number: a value in the range 0 to 29 - - IRQ flags: value to describe edge and level triggering, as defined in - <dt-bindings/interrupt-controller/irq.h>. Only the following flags are - supported: - IRQ_TYPE_EDGE_RISING - IRQ_TYPE_EDGE_FALLING - IRQ_TYPE_EDGE_BOTH - IRQ_TYPE_LEVEL_HIGH - IRQ_TYPE_LEVEL_LOW - - - -Example: - - gpios: gpio-controller@2005800 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "img,tz1090-gpio"; - reg = <0x02005800 0x90>; - - /* bank 0 with an interrupt */ - gpios0: bank@0 { - #gpio-cells = <2>; - #interrupt-cells = <2>; - reg = <0>; - interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - gpio-ranges = <&pinctrl 0 0 30>; - interrupt-controller; - }; - - /* bank 2 without interrupt */ - gpios2: bank@2 { - #gpio-cells = <2>; - reg = <2>; - gpio-controller; - gpio-ranges = <&pinctrl 0 60 30>; - }; - }; - - diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 6d481ef03623..2ecd2adbaec6 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -480,21 +480,6 @@ config GPIO_THUNDERX Say yes here to support the on-chip GPIO lines on the ThunderX and OCTEON-TX families of SoCs. -config GPIO_TZ1090 - bool "Toumaz Xenif TZ1090 GPIO support" - depends on SOC_TZ1090 - select GENERIC_IRQ_CHIP - default y - help - Say yes here to support Toumaz Xenif TZ1090 GPIOs. - -config GPIO_TZ1090_PDC - bool "Toumaz Xenif TZ1090 PDC GPIO support" - depends on SOC_TZ1090 - default y - help - Say yes here to support Toumaz Xenif TZ1090 PDC GPIOs. - config GPIO_UNIPHIER tristate "UniPhier GPIO support" depends on ARCH_UNIPHIER || COMPILE_TEST diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 77f88bc086c4..3ad5e3cb628b 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -133,8 +133,6 @@ obj-$(CONFIG_GPIO_TS4900) += gpio-ts4900.o obj-$(CONFIG_GPIO_TS5500) += gpio-ts5500.o obj-$(CONFIG_GPIO_TWL4030) += gpio-twl4030.o obj-$(CONFIG_GPIO_TWL6040) += gpio-twl6040.o -obj-$(CONFIG_GPIO_TZ1090) += gpio-tz1090.o -obj-$(CONFIG_GPIO_TZ1090_PDC) += gpio-tz1090-pdc.o obj-$(CONFIG_GPIO_UCB1400) += gpio-ucb1400.o obj-$(CONFIG_GPIO_UNIPHIER) += gpio-uniphier.o obj-$(CONFIG_GPIO_VF610) += gpio-vf610.o diff --git a/drivers/gpio/gpio-tz1090-pdc.c b/drivers/gpio/gpio-tz1090-pdc.c deleted file mode 100644 index 5b7781741ee9..000000000000 --- a/drivers/gpio/gpio-tz1090-pdc.c +++ /dev/null @@ -1,231 +0,0 @@ -/* - * Toumaz Xenif TZ1090 PDC GPIO handling. - * - * Copyright (C) 2012-2013 Imagination Technologies Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/bitops.h> -#include <linux/gpio.h> -#include <linux/io.h> -#include <linux/module.h> -#include <linux/of_irq.h> -#include <linux/pinctrl/consumer.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/syscore_ops.h> -#include <asm/global_lock.h> - -/* Register offsets from SOC_GPIO_CONTROL0 */ -#define REG_SOC_GPIO_CONTROL0 0x00 -#define REG_SOC_GPIO_CONTROL1 0x04 -#define REG_SOC_GPIO_CONTROL2 0x08 -#define REG_SOC_GPIO_CONTROL3 0x0c -#define REG_SOC_GPIO_STATUS 0x80 - -/* PDC GPIOs go after normal GPIOs */ -#define GPIO_PDC_BASE 90 -#define GPIO_PDC_NGPIO 7 - -/* Out of PDC gpios, only syswakes have irqs */ -#define GPIO_PDC_IRQ_FIRST 2 -#define GPIO_PDC_NIRQ 3 - -/** - * struct tz1090_pdc_gpio - GPIO bank private data - * @chip: Generic GPIO chip for GPIO bank - * @reg: Base of registers, offset for this GPIO bank - * @irq: IRQ numbers for Syswake GPIOs - * - * This is the main private data for the PDC GPIO driver. It encapsulates a - * gpio_chip, and the callbacks for the gpio_chip can access the private data - * with the to_pdc() macro below. - */ -struct tz1090_pdc_gpio { - struct gpio_chip chip; - void __iomem *reg; - int irq[GPIO_PDC_NIRQ]; -}; - -/* Register accesses into the PDC MMIO area */ - -static inline void pdc_write(struct tz1090_pdc_gpio *priv, unsigned int reg_offs, - unsigned int data) -{ - writel(data, priv->reg + reg_offs); -} - -static inline unsigned int pdc_read(struct tz1090_pdc_gpio *priv, - unsigned int reg_offs) -{ - return readl(priv->reg + reg_offs); -} - -/* Generic GPIO interface */ - -static int tz1090_pdc_gpio_direction_input(struct gpio_chip *chip, - unsigned int offset) -{ - struct tz1090_pdc_gpio *priv = gpiochip_get_data(chip); - u32 value; - int lstat; - - __global_lock2(lstat); - value = pdc_read(priv, REG_SOC_GPIO_CONTROL1); - value |= BIT(offset); - pdc_write(priv, REG_SOC_GPIO_CONTROL1, value); - __global_unlock2(lstat); - - return 0; -} - -static int tz1090_pdc_gpio_direction_output(struct gpio_chip *chip, - unsigned int offset, - int output_value) -{ - struct tz1090_pdc_gpio *priv = gpiochip_get_data(chip); - u32 value; - int lstat; - - __global_lock2(lstat); - /* EXT_POWER doesn't seem to have an output value bit */ - if (offset < 6) { - value = pdc_read(priv, REG_SOC_GPIO_CONTROL0); - if (output_value) - value |= BIT(offset); - else - value &= ~BIT(offset); - pdc_write(priv, REG_SOC_GPIO_CONTROL0, value); - } - - value = pdc_read(priv, REG_SOC_GPIO_CONTROL1); - value &= ~BIT(offset); - pdc_write(priv, REG_SOC_GPIO_CONTROL1, value); - __global_unlock2(lstat); - - return 0; -} - -static int tz1090_pdc_gpio_get(struct gpio_chip *chip, unsigned int offset) -{ - struct tz1090_pdc_gpio *priv = gpiochip_get_data(chip); - return !!(pdc_read(priv, REG_SOC_GPIO_STATUS) & BIT(offset)); -} - -static void tz1090_pdc_gpio_set(struct gpio_chip *chip, unsigned int offset, - int output_value) -{ - struct tz1090_pdc_gpio *priv = gpiochip_get_data(chip); - u32 value; - int lstat; - - /* EXT_POWER doesn't seem to have an output value bit */ - if (offset >= 6) - return; - - __global_lock2(lstat); - value = pdc_read(priv, REG_SOC_GPIO_CONTROL0); - if (output_value) - value |= BIT(offset); - else - value &= ~BIT(offset); - pdc_write(priv, REG_SOC_GPIO_CONTROL0, value); - __global_unlock2(lstat); -} - -static int tz1090_pdc_gpio_to_irq(struct gpio_chip *chip, unsigned int offset) -{ - struct tz1090_pdc_gpio *priv = gpiochip_get_data(chip); - unsigned int syswake = offset - GPIO_PDC_IRQ_FIRST; - int irq; - - /* only syswakes have irqs */ - if (syswake >= GPIO_PDC_NIRQ) - return -EINVAL; - - irq = priv->irq[syswake]; - if (!irq) - return -EINVAL; - - return irq; -} - -static int tz1090_pdc_gpio_probe(struct platform_device *pdev) -{ - struct device_node *np = pdev->dev.of_node; - struct resource *res_regs; - struct tz1090_pdc_gpio *priv; - unsigned int i; - - if (!np) { - dev_err(&pdev->dev, "must be instantiated via devicetree\n"); - return -ENOENT; - } - - res_regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res_regs) { - dev_err(&pdev->dev, "cannot find registers resource\n"); - return -ENOENT; - } - - priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); - if (!priv) { - dev_err(&pdev->dev, "unable to allocate driver data\n"); - return -ENOMEM; - } - - /* Ioremap the registers */ - priv->reg = devm_ioremap(&pdev->dev, res_regs->start, - resource_size(res_regs)); - if (!priv->reg) { - dev_err(&pdev->dev, "unable to ioremap registers\n"); - return -ENOMEM; - } - - /* Set up GPIO chip */ - priv->chip.label = "tz1090-pdc-gpio"; - priv->chip.parent = &pdev->dev; - priv->chip.direction_input = tz1090_pdc_gpio_direction_input; - priv->chip.direction_output = tz1090_pdc_gpio_direction_output; - priv->chip.get = tz1090_pdc_gpio_get; - priv->chip.set = tz1090_pdc_gpio_set; - priv->chip.free = gpiochip_generic_free; - priv->chip.request = gpiochip_generic_request; - priv->chip.to_irq = tz1090_pdc_gpio_to_irq; - priv->chip.of_node = np; - - /* GPIO numbering */ - priv->chip.base = GPIO_PDC_BASE; - priv->chip.ngpio = GPIO_PDC_NGPIO; - - /* Map the syswake irqs */ - for (i = 0; i < GPIO_PDC_NIRQ; ++i) - priv->irq[i] = irq_of_parse_and_map(np, i); - - /* Add the GPIO bank */ - gpiochip_add_data(&priv->chip, priv); - - return 0; -} - -static struct of_device_id tz1090_pdc_gpio_of_match[] = { - { .compatible = "img,tz1090-pdc-gpio" }, - { }, -}; - -static struct platform_driver tz1090_pdc_gpio_driver = { - .driver = { - .name = "tz1090-pdc-gpio", - .of_match_table = tz1090_pdc_gpio_of_match, - }, - .probe = tz1090_pdc_gpio_probe, -}; - -static int __init tz1090_pdc_gpio_init(void) -{ - return platform_driver_register(&tz1090_pdc_gpio_driver); -} -subsys_initcall(tz1090_pdc_gpio_init); diff --git a/drivers/gpio/gpio-tz1090.c b/drivers/gpio/gpio-tz1090.c deleted file mode 100644 index 0bb9bb583889..000000000000 --- a/drivers/gpio/gpio-tz1090.c +++ /dev/null @@ -1,602 +0,0 @@ -/* - * Toumaz Xenif TZ1090 GPIO handling. - * - * Copyright (C) 2008-2013 Imagination Technologies Ltd. - * - * Based on ARM PXA code and others. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/bitops.h> -#include <linux/export.h> -#include <linux/gpio.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/irqdomain.h> -#include <linux/kernel.h> -#include <linux/of_irq.h> -#include <linux/pinctrl/consumer.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/syscore_ops.h> -#include <asm/global_lock.h> - -/* Register offsets from bank base address */ -#define REG_GPIO_DIR 0x00 -#define REG_GPIO_IRQ_PLRT 0x20 -#define REG_GPIO_IRQ_TYPE 0x30 -#define REG_GPIO_IRQ_EN 0x40 -#define REG_GPIO_IRQ_STS 0x50 -#define REG_GPIO_BIT_EN 0x60 -#define REG_GPIO_DIN 0x70 -#define REG_GPIO_DOUT 0x80 - -/* REG_GPIO_IRQ_PLRT */ -#define REG_GPIO_IRQ_PLRT_LOW 0 -#define REG_GPIO_IRQ_PLRT_HIGH 1 - -/* REG_GPIO_IRQ_TYPE */ -#define REG_GPIO_IRQ_TYPE_LEVEL 0 -#define REG_GPIO_IRQ_TYPE_EDGE 1 - -/** - * struct tz1090_gpio_bank - GPIO bank private data - * @chip: Generic GPIO chip for GPIO bank - * @domain: IRQ domain for GPIO bank (may be NULL) - * @reg: Base of registers, offset for this GPIO bank - * @irq: IRQ number for GPIO bank - * @label: Debug GPIO bank label, used for storage of chip->label - * - * This is the main private data for a GPIO bank. It encapsulates a gpio_chip, - * and the callbacks for the gpio_chip can access the private data with the - * to_bank() macro below. - */ -struct tz1090_gpio_bank { - struct gpio_chip chip; - struct irq_domain *domain; - void __iomem *reg; - int irq; - char label[16]; -}; - -/** - * struct tz1090_gpio - Overall GPIO device private data - * @dev: Device (from platform device) - * @reg: Base of GPIO registers - * - * Represents the overall GPIO device. This structure is actually only - * temporary, and used during init. - */ -struct tz1090_gpio { - struct device *dev; - void __iomem *reg; -}; - -/** - * struct tz1090_gpio_bank_info - Temporary registration info for GPIO bank - * @priv: Overall GPIO device private data - * @node: Device tree node specific to this GPIO bank - * @index: Index of bank in range 0-2 - */ -struct tz1090_gpio_bank_info { - struct tz1090_gpio *priv; - struct device_node *node; - unsigned int index; -}; - -/* Convenience register accessors */ -static inline void tz1090_gpio_write(struct tz1090_gpio_bank *bank, - unsigned int reg_offs, u32 data) -{ - iowrite32(data, bank->reg + reg_offs); -} - -static inline u32 tz1090_gpio_read(struct tz1090_gpio_bank *bank, - unsigned int reg_offs) -{ - return ioread32(bank->reg + reg_offs); -} - -/* caller must hold LOCK2 */ -static inline void _tz1090_gpio_clear_bit(struct tz1090_gpio_bank *bank, - unsigned int reg_offs, - unsigned int offset) -{ - u32 value; - - value = tz1090_gpio_read(bank, reg_offs); - value &= ~BIT(offset); - tz1090_gpio_write(bank, reg_offs, value); -} - -static void tz1090_gpio_clear_bit(struct tz1090_gpio_bank *bank, - unsigned int reg_offs, - unsigned int offset) -{ - int lstat; - - __global_lock2(lstat); - _tz1090_gpio_clear_bit(bank, reg_offs, offset); - __global_unlock2(lstat); -} - -/* caller must hold LOCK2 */ -static inline void _tz1090_gpio_set_bit(struct tz1090_gpio_bank *bank, - unsigned int reg_offs, - unsigned int offset) -{ - u32 value; - - value = tz1090_gpio_read(bank, reg_offs); - value |= BIT(offset); - tz1090_gpio_write(bank, reg_offs, value); -} - -static void tz1090_gpio_set_bit(struct tz1090_gpio_bank *bank, - unsigned int reg_offs, - unsigned int offset) -{ - int lstat; - - __global_lock2(lstat); - _tz1090_gpio_set_bit(bank, reg_offs, offset); - __global_unlock2(lstat); -} - -/* caller must hold LOCK2 */ -static inline void _tz1090_gpio_mod_bit(struct tz1090_gpio_bank *bank, - unsigned int reg_offs, - unsigned int offset, - bool val) -{ - u32 value; - - value = tz1090_gpio_read(bank, reg_offs); - value &= ~BIT(offset); - if (val) - value |= BIT(offset); - tz1090_gpio_write(bank, reg_offs, value); -} - -static void tz1090_gpio_mod_bit(struct tz1090_gpio_bank *bank, - unsigned int reg_offs, - unsigned int offset, - bool val) -{ - int lstat; - - __global_lock2(lstat); - _tz1090_gpio_mod_bit(bank, reg_offs, offset, val); - __global_unlock2(lstat); -} - -static inline int tz1090_gpio_read_bit(struct tz1090_gpio_bank *bank, - unsigned int reg_offs, - unsigned int offset) -{ - return tz1090_gpio_read(bank, reg_offs) & BIT(offset); -} - -/* GPIO chip callbacks */ - -static int tz1090_gpio_direction_input(struct gpio_chip *chip, - unsigned int offset) -{ - struct tz1090_gpio_bank *bank = gpiochip_get_data(chip); - tz1090_gpio_set_bit(bank, REG_GPIO_DIR, offset); - - return 0; -} - -static int tz1090_gpio_direction_output(struct gpio_chip *chip, - unsigned int offset, int output_value) -{ - struct tz1090_gpio_bank *bank = gpiochip_get_data(chip); - int lstat; - - __global_lock2(lstat); - _tz1090_gpio_mod_bit(bank, REG_GPIO_DOUT, offset, output_value); - _tz1090_gpio_clear_bit(bank, REG_GPIO_DIR, offset); - __global_unlock2(lstat); - - return 0; -} - -/* - * Return GPIO level - */ -static int tz1090_gpio_get(struct gpio_chip *chip, unsigned int offset) -{ - struct tz1090_gpio_bank *bank = gpiochip_get_data(chip); - - return !!tz1090_gpio_read_bit(bank, REG_GPIO_DIN, offset); -} - -/* - * Set output GPIO level - */ -static void tz1090_gpio_set(struct gpio_chip *chip, unsigned int offset, - int output_value) -{ - struct tz1090_gpio_bank *bank = gpiochip_get_data(chip); - - tz1090_gpio_mod_bit(bank, REG_GPIO_DOUT, offset, output_value); -} - -static int tz1090_gpio_request(struct gpio_chip *chip, unsigned int offset) -{ - struct tz1090_gpio_bank *bank = gpiochip_get_data(chip); - int ret; - - ret = pinctrl_gpio_request(chip->base + offset); - if (ret) - return ret; - - tz1090_gpio_set_bit(bank, REG_GPIO_DIR, offset); - tz1090_gpio_set_bit(bank, REG_GPIO_BIT_EN, offset); - - return 0; -} - -static void tz1090_gpio_free(struct gpio_chip *chip, unsigned int offset) -{ - struct tz1090_gpio_bank *bank = gpiochip_get_data(chip); - - pinctrl_gpio_free(chip->base + offset); - - tz1090_gpio_clear_bit(bank, REG_GPIO_BIT_EN, offset); -} - -static int tz1090_gpio_to_irq(struct gpio_chip *chip, unsigned int offset) -{ - struct tz1090_gpio_bank *bank = gpiochip_get_data(chip); - - if (!bank->domain) - return -EINVAL; - - return irq_create_mapping(bank->domain, offset); -} - -/* IRQ chip handlers */ - -/* Get TZ1090 GPIO chip from irq data provided to generic IRQ callbacks */ -static inline struct tz1090_gpio_bank *irqd_to_gpio_bank(struct irq_data *data) -{ - return (struct tz1090_gpio_bank *)data->domain->host_data; -} - -static void tz1090_gpio_irq_polarity(struct tz1090_gpio_bank *bank, - unsigned int offset, unsigned int polarity) -{ - tz1090_gpio_mod_bit(bank, REG_GPIO_IRQ_PLRT, offset, polarity); -} - -static void tz1090_gpio_irq_type(struct tz1090_gpio_bank *bank, - unsigned int offset, unsigned int type) -{ - tz1090_gpio_mod_bit(bank, REG_GPIO_IRQ_TYPE, offset, type); -} - -/* set polarity to trigger on next edge, whether rising or falling */ -static void tz1090_gpio_irq_next_edge(struct tz1090_gpio_bank *bank, - unsigned int offset) -{ - unsigned int value_p, value_i; - int lstat; - - /* - * Set the GPIO's interrupt polarity to the opposite of the current - * input value so that the next edge triggers an interrupt. - */ - __global_lock2(lstat); - value_i = ~tz1090_gpio_read(bank, REG_GPIO_DIN); - value_p = tz1090_gpio_read(bank, REG_GPIO_IRQ_PLRT); - value_p &= ~BIT(offset); - value_p |= value_i & BIT(offset); - tz1090_gpio_write(bank, REG_GPIO_IRQ_PLRT, value_p); - __global_unlock2(lstat); -} - -static unsigned int gpio_startup_irq(struct irq_data *data) -{ - /* - * This warning indicates that the type of the irq hasn't been set - * before enabling the irq. This would normally be done by passing some - * trigger flags to request_irq(). - */ - WARN(irqd_get_trigger_type(data) == IRQ_TYPE_NONE, - "irq type not set before enabling gpio irq %d", data->irq); - - irq_gc_ack_clr_bit(data); - irq_gc_mask_set_bit(data); - return 0; -} - -static int gpio_set_irq_type(struct irq_data *data, unsigned int flow_type) -{ - struct tz1090_gpio_bank *bank = irqd_to_gpio_bank(data); - unsigned int type; - unsigned int polarity; - - switch (flow_type) { - case IRQ_TYPE_EDGE_BOTH: - type = REG_GPIO_IRQ_TYPE_EDGE; - polarity = REG_GPIO_IRQ_PLRT_LOW; - break; - case IRQ_TYPE_EDGE_RISING: - type = REG_GPIO_IRQ_TYPE_EDGE; - polarity = REG_GPIO_IRQ_PLRT_HIGH; - break; - case IRQ_TYPE_EDGE_FALLING: - type = REG_GPIO_IRQ_TYPE_EDGE; - polarity = REG_GPIO_IRQ_PLRT_LOW; - break; - case IRQ_TYPE_LEVEL_HIGH: - type = REG_GPIO_IRQ_TYPE_LEVEL; - polarity = REG_GPIO_IRQ_PLRT_HIGH; - break; - case IRQ_TYPE_LEVEL_LOW: - type = REG_GPIO_IRQ_TYPE_LEVEL; - polarity = REG_GPIO_IRQ_PLRT_LOW; - break; - default: - return -EINVAL; - } - - tz1090_gpio_irq_type(bank, data->hwirq, type); - irq_setup_alt_chip(data, flow_type); - - if (flow_type == IRQ_TYPE_EDGE_BOTH) - tz1090_gpio_irq_next_edge(bank, data->hwirq); - else - tz1090_gpio_irq_polarity(bank, data->hwirq, polarity); - - return 0; -} - -#ifdef CONFIG_SUSPEND -static int gpio_set_irq_wake(struct irq_data *data, unsigned int on) -{ - struct tz1090_gpio_bank *bank = irqd_to_gpio_bank(data); - -#ifdef CONFIG_PM_DEBUG - pr_info("irq_wake irq%d state:%d\n", data->irq, on); -#endif - - /* wake on gpio block interrupt */ - return irq_set_irq_wake(bank->irq, on); -} -#else -#define gpio_set_irq_wake NULL -#endif - -static void tz1090_gpio_irq_handler(struct irq_desc *desc) -{ - irq_hw_number_t hw; - unsigned int irq_stat, irq_no; - struct tz1090_gpio_bank *bank; - struct irq_desc *child_desc; - - bank = (struct tz1090_gpio_bank *)irq_desc_get_handler_data(desc); - irq_stat = tz1090_gpio_read(bank, REG_GPIO_DIR) & - tz1090_gpio_read(bank, REG_GPIO_IRQ_STS) & - tz1090_gpio_read(bank, REG_GPIO_IRQ_EN) & - 0x3FFFFFFF; /* 30 bits only */ - - for (hw = 0; irq_stat; irq_stat >>= 1, ++hw) { - if (!(irq_stat & 1)) - continue; - - irq_no = irq_linear_revmap(bank->domain, hw); - child_desc = irq_to_desc(irq_no); - - /* Toggle edge for pin with both edges triggering enabled */ - if (irqd_get_trigger_type(&child_desc->irq_data) - == IRQ_TYPE_EDGE_BOTH) - tz1090_gpio_irq_next_edge(bank, hw); - - generic_handle_irq_desc(child_desc); - } -} - -static int tz1090_gpio_bank_probe(struct tz1090_gpio_bank_info *info) -{ - struct device_node *np = info->node; - struct device *dev = info->priv->dev; - struct tz1090_gpio_bank *bank; - struct irq_chip_generic *gc; - int err; - - bank = devm_kzalloc(dev, sizeof(*bank), GFP_KERNEL); - if (!bank) { - dev_err(dev, "unable to allocate driver data\n"); - return -ENOMEM; - } - - /* Offset the main registers to the first register in this bank */ - bank->reg = info->priv->reg + info->index * 4; - - /* Set up GPIO chip */ - snprintf(bank->label, sizeof(bank->label), "tz1090-gpio-%u", - info->index); - bank->chip.label = bank->label; - bank->chip.parent = dev; - bank->chip.direction_input = tz1090_gpio_direction_input; - bank->chip.direction_output = tz1090_gpio_direction_output; - bank->chip.get = tz1090_gpio_get; - bank->chip.set = tz1090_gpio_set; - bank->chip.free = tz1090_gpio_free; - bank->chip.request = tz1090_gpio_request; - bank->chip.to_irq = tz1090_gpio_to_irq; - bank->chip.of_node = np; - - /* GPIO numbering from 0 */ - bank->chip.base = info->index * 30; - bank->chip.ngpio = 30; - - /* Add the GPIO bank */ - gpiochip_add_data(&bank->chip, bank); - - /* Get the GPIO bank IRQ if provided */ - bank->irq = irq_of_parse_and_map(np, 0); - - /* The interrupt is optional (it may be used by another core on chip) */ - if (!bank->irq) { - dev_info(dev, "IRQ not provided for bank %u, IRQs disabled\n", - info->index); - return 0; - } - - dev_info(dev, "Setting up IRQs for GPIO bank %u\n", - info->index); - - /* - * Initialise all interrupts to disabled so we don't get - * spurious ones on a dirty boot and hit the BUG_ON in the - * handler. - */ - tz1090_gpio_write(bank, REG_GPIO_IRQ_EN, 0); - - /* Add a virtual IRQ for each GPIO */ - bank->domain = irq_domain_add_linear(np, - bank->chip.ngpio, - &irq_generic_chip_ops, - bank); - - /* Set up a generic irq chip with 2 chip types (level and edge) */ - err = irq_alloc_domain_generic_chips(bank->domain, bank->chip.ngpio, 2, - bank->label, handle_bad_irq, 0, 0, - IRQ_GC_INIT_NESTED_LOCK); - if (err) { - dev_info(dev, - "irq_alloc_domain_generic_chips failed for bank %u, IRQs disabled\n", - info->index); - irq_domain_remove(bank->domain); - return 0; - } - - gc = irq_get_domain_generic_chip(bank->domain, 0); - gc->reg_base = bank->reg; - - /* level chip type */ - gc->chip_types[0].type = IRQ_TYPE_LEVEL_MASK; - gc->chip_types[0].handler = handle_level_irq; - gc->chip_types[0].regs.ack = REG_GPIO_IRQ_STS; - gc->chip_types[0].regs.mask = REG_GPIO_IRQ_EN; - gc->chip_types[0].chip.irq_startup = gpio_startup_irq; - gc->chip_types[0].chip.irq_ack = irq_gc_ack_clr_bit; - gc->chip_types[0].chip.irq_mask = irq_gc_mask_clr_bit; - gc->chip_types[0].chip.irq_unmask = irq_gc_mask_set_bit; - gc->chip_types[0].chip.irq_set_type = gpio_set_irq_type; - gc->chip_types[0].chip.irq_set_wake = gpio_set_irq_wake; - gc->chip_types[0].chip.flags = IRQCHIP_MASK_ON_SUSPEND; - - /* edge chip type */ - gc->chip_types[1].type = IRQ_TYPE_EDGE_BOTH; - gc->chip_types[1].handler = handle_edge_irq; - gc->chip_types[1].regs.ack = REG_GPIO_IRQ_STS; - gc->chip_types[1].regs.mask = REG_GPIO_IRQ_EN; - gc->chip_types[1].chip.irq_startup = gpio_startup_irq; - gc->chip_types[1].chip.irq_ack = irq_gc_ack_clr_bit; - gc->chip_types[1].chip.irq_mask = irq_gc_mask_clr_bit; - gc->chip_types[1].chip.irq_unmask = irq_gc_mask_set_bit; - gc->chip_types[1].chip.irq_set_type = gpio_set_irq_type; - gc->chip_types[1].chip.irq_set_wake = gpio_set_irq_wake; - gc->chip_types[1].chip.flags = IRQCHIP_MASK_ON_SUSPEND; - - /* Setup chained handler for this GPIO bank */ - irq_set_chained_handler_and_data(bank->irq, tz1090_gpio_irq_handler, - bank); - - return 0; -} - -static void tz1090_gpio_register_banks(struct tz1090_gpio *priv) -{ - struct device_node *np = priv->dev->of_node; - struct device_node *node; - - for_each_available_child_of_node(np, node) { - struct tz1090_gpio_bank_info info; - u32 addr; - int ret; - - ret = of_property_read_u32(node, "reg", &addr); - if (ret) { - dev_err(priv->dev, "invalid reg on %pOF\n", node); - continue; - } - if (addr >= 3) { - dev_err(priv->dev, "index %u in %pOF out of range\n", - addr, node); - continue; - } - - info.index = addr; - info.node = of_node_get(node); - info.priv = priv; - - ret = tz1090_gpio_bank_probe(&info); - if (ret) { - dev_err(priv->dev, "failure registering %pOF\n", node); - of_node_put(node); - continue; - } - } -} - -static int tz1090_gpio_probe(struct platform_device *pdev) -{ - struct device_node *np = pdev->dev.of_node; - struct resource *res_regs; - struct tz1090_gpio priv; - - if (!np) { - dev_err(&pdev->dev, "must be instantiated via devicetree\n"); - return -ENOENT; - } - - res_regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res_regs) { - dev_err(&pdev->dev, "cannot find registers resource\n"); - return -ENOENT; - } - - priv.dev = &pdev->dev; - - /* Ioremap the registers */ - priv.reg = devm_ioremap(&pdev->dev, res_regs->start, - resource_size(res_regs)); - if (!priv.reg) { - dev_err(&pdev->dev, "unable to ioremap registers\n"); - return -ENOMEM; - } - - /* Look for banks */ - tz1090_gpio_register_banks(&priv); - - return 0; -} - -static struct of_device_id tz1090_gpio_of_match[] = { - { .compatible = "img,tz1090-gpio" }, - { }, -}; - -static struct platform_driver tz1090_gpio_driver = { - .driver = { - .name = "tz1090-gpio", - .of_match_table = tz1090_gpio_of_match, - }, - .probe = tz1090_gpio_probe, -}; - -static int __init tz1090_gpio_init(void) -{ - return platform_driver_register(&tz1090_gpio_driver); -} -subsys_initcall(tz1090_gpio_init); |