diff options
| -rw-r--r-- | arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi | 29 | ||||
| -rw-r--r-- | arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi | 2 | ||||
| -rw-r--r-- | arch/arm/boot/dts/omap5.dtsi | 20 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/omap-iommu.c | 2 |
4 files changed, 21 insertions, 32 deletions
diff --git a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi index 100396f6c2fe..395e05f10d36 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi @@ -51,6 +51,8 @@ &mcbsp2 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp2_pins>; }; &charger { @@ -102,35 +104,18 @@ regulator-max-microvolt = <3300000>; }; - lcd0: display@0 { - compatible = "panel-dpi"; - label = "28"; - status = "okay"; - /* default-on; */ + lcd0: display { + /* This isn't the exact LCD, but the timings meet spec */ + compatible = "logicpd,type28"; pinctrl-names = "default"; pinctrl-0 = <&lcd_enable_pin>; - enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */ + backlight = <&bl>; + enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; port { lcd_in: endpoint { remote-endpoint = <&dpi_out>; }; }; - - panel-timing { - clock-frequency = <9000000>; - hactive = <480>; - vactive = <272>; - hfront-porch = <3>; - hback-porch = <2>; - hsync-len = <42>; - vback-porch = <3>; - vfront-porch = <2>; - vsync-len = <11>; - hsync-active = <1>; - vsync-active = <1>; - de-active = <1>; - pixelclk-active = <0>; - }; }; bl: backlight { diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi index 381f0e82bb70..b0f6613e6d54 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi @@ -81,6 +81,8 @@ }; &mcbsp2 { + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp2_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 5da9cff7a53c..a82c96258a93 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -488,11 +488,11 @@ }; }; - target-module@5000 { + target-module@4000 { compatible = "ti,sysc-omap2", "ti,sysc"; - reg = <0x5000 0x4>, - <0x5010 0x4>, - <0x5014 0x4>; + reg = <0x4000 0x4>, + <0x4010 0x4>, + <0x4014 0x4>; reg-names = "rev", "sysc", "syss"; ti,sysc-sidle = <SYSC_IDLE_FORCE>, <SYSC_IDLE_NO>, @@ -504,7 +504,7 @@ ti,syss-mask = <1>; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0x5000 0x1000>; + ranges = <0 0x4000 0x1000>; dsi1: encoder@0 { compatible = "ti,omap5-dsi"; @@ -514,8 +514,9 @@ reg-names = "proto", "phy", "pll"; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; - clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; - clock-names = "fck"; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, + <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>; + clock-names = "fck", "sys_clk"; }; }; @@ -545,8 +546,9 @@ reg-names = "proto", "phy", "pll"; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; - clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; - clock-names = "fck"; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, + <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>; + clock-names = "fck", "sys_clk"; }; }; diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c index 54aff33e55e6..bfa5e1b8dba7 100644 --- a/arch/arm/mach-omap2/omap-iommu.c +++ b/arch/arm/mach-omap2/omap-iommu.c @@ -74,7 +74,7 @@ static struct powerdomain *_get_pwrdm(struct device *dev) return pwrdm; clk = of_clk_get(dev->of_node->parent, 0); - if (!clk) { + if (IS_ERR(clk)) { dev_err(dev, "no fck found\n"); return NULL; } |