diff options
| -rw-r--r-- | Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt | 28 | ||||
| -rw-r--r-- | drivers/i2c/busses/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/i2c/busses/Makefile | 1 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-brcmstb.c | 694 |
4 files changed, 733 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt b/Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt new file mode 100644 index 000000000000..d6f724efdcf2 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt @@ -0,0 +1,28 @@ +Broadcom stb bsc iic master controller + +Required properties: + +- compatible: should be "brcm,brcmstb-i2c" +- clock-frequency: 32-bit decimal value of iic master clock freqency in Hz + valid values are 375000, 390000, 187500, 200000 + 93750, 97500, 46875 and 50000 +- reg: specifies the base physical address and size of the registers + +Optional properties : + +- interrupt-parent: specifies the phandle to the parent interrupt controller + this one is cascaded from +- interrupts: specifies the interrupt number, the irq line to be used +- interrupt-names: Interrupt name string + +Example: + +bsca: i2c@f0406200 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&irq0_intc>; + reg = <0xf0406200 0x58>; + interrupts = <0x18>; + interrupt-names = "upg_bsca"; +}; + diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 8a639dce5173..b8c3d6b53861 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -392,6 +392,16 @@ config I2C_BCM_KONA If you do not need KONA I2C interface, say N. +config I2C_BRCMSTB + tristate "BRCM Settop I2C controller" + depends on ARCH_BRCMSTB || COMPILE_TEST + default y + help + If you say yes to this option, support will be included for the + I2C interface on the Broadcom Settop SoCs. + + If you do not need I2C interface, say N. + config I2C_BLACKFIN_TWI tristate "Blackfin TWI I2C support" depends on BLACKFIN diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 65995423c680..e5f537c80da0 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -106,6 +106,7 @@ obj-$(CONFIG_I2C_VIPERBOARD) += i2c-viperboard.o # Other I2C/SMBus bus drivers obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o obj-$(CONFIG_I2C_BCM_KONA) += i2c-bcm-kona.o +obj-$(CONFIG_I2C_BRCMSTB) += i2c-brcmstb.o obj-$(CONFIG_I2C_CROS_EC_TUNNEL) += i2c-cros-ec-tunnel.o obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o obj-$(CONFIG_I2C_OPAL) += i2c-opal.o diff --git a/drivers/i2c/busses/i2c-brcmstb.c b/drivers/i2c/busses/i2c-brcmstb.c new file mode 100644 index 000000000000..8e9637eea512 --- /dev/null +++ b/drivers/i2c/busses/i2c-brcmstb.c @@ -0,0 +1,694 @@ +/* + * Copyright (C) 2014 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/version.h> + +#define N_DATA_REGS 8 +#define N_DATA_BYTES (N_DATA_REGS * 4) + +/* BSC count register field definitions */ +#define BSC_CNT_REG1_MASK 0x0000003f +#define BSC_CNT_REG1_SHIFT 0 +#define BSC_CNT_REG2_MASK 0x00000fc0 +#define BSC_CNT_REG2_SHIFT 6 + +/* BSC CTL register field definitions */ +#define BSC_CTL_REG_DTF_MASK 0x00000003 +#define BSC_CTL_REG_SCL_SEL_MASK 0x00000030 +#define BSC_CTL_REG_SCL_SEL_SHIFT 4 +#define BSC_CTL_REG_INT_EN_MASK 0x00000040 +#define BSC_CTL_REG_INT_EN_SHIFT 6 +#define BSC_CTL_REG_DIV_CLK_MASK 0x00000080 + +/* BSC_IIC_ENABLE r/w enable and interrupt field defintions */ +#define BSC_IIC_EN_RESTART_MASK 0x00000040 +#define BSC_IIC_EN_NOSTART_MASK 0x00000020 +#define BSC_IIC_EN_NOSTOP_MASK 0x00000010 +#define BSC_IIC_EN_NOACK_MASK 0x00000004 +#define BSC_IIC_EN_INTRP_MASK 0x00000002 +#define BSC_IIC_EN_ENABLE_MASK 0x00000001 + +/* BSC_CTLHI control register field definitions */ +#define BSC_CTLHI_REG_INPUT_SWITCHING_LEVEL_MASK 0x00000080 +#define BSC_CTLHI_REG_DATAREG_SIZE_MASK 0x00000040 +#define BSC_CTLHI_REG_IGNORE_ACK_MASK 0x00000002 +#define BSC_CTLHI_REG_WAIT_DIS_MASK 0x00000001 + +#define I2C_TIMEOUT 100 /* msecs */ + +/* Condition mask used for non combined transfer */ +#define COND_RESTART BSC_IIC_EN_RESTART_MASK +#define COND_NOSTART BSC_IIC_EN_NOSTART_MASK +#define COND_NOSTOP BSC_IIC_EN_NOSTOP_MASK +#define COND_START_STOP (COND_RESTART | COND_NOSTART | COND_NOSTOP) + +/* BSC data transfer direction */ +#define DTF_WR_MASK 0x00000000 +#define DTF_RD_MASK 0x00000001 +/* BSC data transfer direction combined format */ +#define DTF_RD_WR_MASK 0x00000002 +#define DTF_WR_RD_MASK 0x00000003 + +#define INT_ENABLE true +#define INT_DISABLE false + +/* BSC block register map structure to cache fields to be written */ +struct bsc_regs { + u32 chip_address; /* slave address */ + u32 data_in[N_DATA_REGS]; /* tx data buffer*/ + u32 cnt_reg; /* rx/tx data length */ + u32 ctl_reg; /* control register */ + u32 iic_enable; /* xfer enable and status */ + u32 data_out[N_DATA_REGS]; /* rx data buffer */ + u32 ctlhi_reg; /* more control fields */ + u32 scl_param; /* reserved */ +}; + +struct bsc_clk_param { + u32 hz; + u32 scl_mask; + u32 div_mask; +}; + +enum bsc_xfer_cmd { + CMD_WR, + CMD_RD, + CMD_WR_NOACK, + CMD_RD_NOACK, +}; + +static char const *cmd_string[] = { + [CMD_WR] = "WR", + [CMD_RD] = "RD", + [CMD_WR_NOACK] = "WR NOACK", + [CMD_RD_NOACK] = "RD NOACK", +}; + +enum bus_speeds { + SPD_375K, + SPD_390K, + SPD_187K, + SPD_200K, + SPD_93K, + SPD_97K, + SPD_46K, + SPD_50K +}; + +static const struct bsc_clk_param bsc_clk[] = { + [SPD_375K] = { + .hz = 375000, + .scl_mask = SPD_375K << BSC_CTL_REG_SCL_SEL_SHIFT, + .div_mask = 0 + }, + [SPD_390K] = { + .hz = 390000, + .scl_mask = SPD_390K << BSC_CTL_REG_SCL_SEL_SHIFT, + .div_mask = 0 + }, + [SPD_187K] = { + .hz = 187500, + .scl_mask = SPD_187K << BSC_CTL_REG_SCL_SEL_SHIFT, + .div_mask = 0 + }, + [SPD_200K] = { + .hz = 200000, + .scl_mask = SPD_200K << BSC_CTL_REG_SCL_SEL_SHIFT, + .div_mask = 0 + }, + [SPD_93K] = { + .hz = 93750, + .scl_mask = SPD_375K << BSC_CTL_REG_SCL_SEL_SHIFT, + .div_mask = BSC_CTL_REG_DIV_CLK_MASK + }, + [SPD_97K] = { + .hz = 97500, + .scl_mask = SPD_390K << BSC_CTL_REG_SCL_SEL_SHIFT, + .div_mask = BSC_CTL_REG_DIV_CLK_MASK + }, + [SPD_46K] = { + .hz = 46875, + .scl_mask = SPD_187K << BSC_CTL_REG_SCL_SEL_SHIFT, + .div_mask = BSC_CTL_REG_DIV_CLK_MASK + }, + [SPD_50K] = { + .hz = 50000, + .scl_mask = SPD_200K << BSC_CTL_REG_SCL_SEL_SHIFT, + .div_mask = BSC_CTL_REG_DIV_CLK_MASK + } +}; + +struct brcmstb_i2c_dev { + struct device *device; + void __iomem *base; + void __iomem *irq_base; + int irq; + struct bsc_regs *bsc_regmap; + struct i2c_adapter adapter; + struct completion done; + bool is_suspended; + u32 clk_freq_hz; +}; + +/* register accessors for both be and le cpu arch */ +#ifdef CONFIG_CPU_BIG_ENDIAN +#define __bsc_readl(_reg) ioread32be(_reg) +#define __bsc_writel(_val, _reg) iowrite32be(_val, _reg) +#else +#define __bsc_readl(_reg) ioread32(_reg) +#define __bsc_writel(_val, _reg) iowrite32(_val, _reg) +#endif + +#define bsc_readl(_dev, _reg) \ + __bsc_readl(_dev->base + offsetof(struct bsc_regs, _reg)) + +#define bsc_writel(_dev, _val, _reg) \ + __bsc_writel(_val, _dev->base + offsetof(struct bsc_regs, _reg)) + +static void brcmstb_i2c_enable_disable_irq(struct brcmstb_i2c_dev *dev, + bool int_en) +{ + + if (int_en) + /* Enable BSC CTL interrupt line */ + dev->bsc_regmap->ctl_reg |= BSC_CTL_REG_INT_EN_MASK; + else + /* Disable BSC CTL interrupt line */ + dev->bsc_regmap->ctl_reg &= ~BSC_CTL_REG_INT_EN_MASK; + + barrier(); + bsc_writel(dev, dev->bsc_regmap->ctl_reg, ctl_reg); +} + +static irqreturn_t brcmstb_i2c_isr(int irq, void *devid) +{ + struct brcmstb_i2c_dev *dev = devid; + u32 status_bsc_ctl = bsc_readl(dev, ctl_reg); + u32 status_iic_intrp = bsc_readl(dev, iic_enable); + + dev_dbg(dev->device, "isr CTL_REG %x IIC_EN %x\n", + status_bsc_ctl, status_iic_intrp); + + if (!(status_bsc_ctl & BSC_CTL_REG_INT_EN_MASK)) + return IRQ_NONE; + + brcmstb_i2c_enable_disable_irq(dev, INT_DISABLE); + complete_all(&dev->done); + + dev_dbg(dev->device, "isr handled"); + return IRQ_HANDLED; +} + +/* Wait for device to be ready */ +static int brcmstb_i2c_wait_if_busy(struct brcmstb_i2c_dev *dev) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(I2C_TIMEOUT); + + while ((bsc_readl(dev, iic_enable) & BSC_IIC_EN_INTRP_MASK)) { + if (time_after(jiffies, timeout)) + return -ETIMEDOUT; + cpu_relax(); + } + return 0; +} + +/* i2c xfer completion function, handles both irq and polling mode */ +static int brcmstb_i2c_wait_for_completion(struct brcmstb_i2c_dev *dev) +{ + int ret = 0; + unsigned long timeout = msecs_to_jiffies(I2C_TIMEOUT); + + if (dev->irq >= 0) { + if (!wait_for_completion_timeout(&dev->done, timeout)) + ret = -ETIMEDOUT; + } else { + /* we are in polling mode */ + u32 bsc_intrp; + unsigned long time_left = jiffies + timeout; + + do { + bsc_intrp = bsc_readl(dev, iic_enable) & + BSC_IIC_EN_INTRP_MASK; + if (time_after(jiffies, time_left)) { + ret = -ETIMEDOUT; + break; + } + cpu_relax(); + } while (!bsc_intrp); + } + + if (dev->irq < 0 || ret == -ETIMEDOUT) + brcmstb_i2c_enable_disable_irq(dev, INT_DISABLE); + + return ret; +} + +/* Set xfer START/STOP conditions for subsequent transfer */ +static void brcmstb_set_i2c_start_stop(struct brcmstb_i2c_dev *dev, + u32 cond_flag) +{ + u32 regval = dev->bsc_regmap->iic_enable; + + dev->bsc_regmap->iic_enable = (regval & ~COND_START_STOP) | cond_flag; +} + +/* Send I2C request check completion */ +static int brcmstb_send_i2c_cmd(struct brcmstb_i2c_dev *dev, + enum bsc_xfer_cmd cmd) +{ + int rc = 0; + struct bsc_regs *pi2creg = dev->bsc_regmap; + + /* Make sure the hardware is ready */ + rc = brcmstb_i2c_wait_if_busy(dev); + if (rc < 0) + return rc; + + /* only if we are in interrupt mode */ + if (dev->irq >= 0) + reinit_completion(&dev->done); + + /* enable BSC CTL interrupt line */ + brcmstb_i2c_enable_disable_irq(dev, INT_ENABLE); + + /* initiate transfer by setting iic_enable */ + pi2creg->iic_enable |= BSC_IIC_EN_ENABLE_MASK; + bsc_writel(dev, pi2creg->iic_enable, iic_enable); + + /* Wait for transaction to finish or timeout */ + rc = brcmstb_i2c_wait_for_completion(dev); + if (rc) { + dev_dbg(dev->device, "intr timeout for cmd %s\n", + cmd_string[cmd]); + goto cmd_out; + } + + if ((CMD_RD || CMD_WR) && + bsc_readl(dev, iic_enable) & BSC_IIC_EN_NOACK_MASK) { + rc = -EREMOTEIO; + dev_dbg(dev->device, "controller received NOACK intr for %s\n", + cmd_string[cmd]); + } + +cmd_out: + bsc_writel(dev, 0, cnt_reg); + bsc_writel(dev, 0, iic_enable); + + return rc; +} + +/* Actual data transfer through the BSC master */ +static int brcmstb_i2c_xfer_bsc_data(struct brcmstb_i2c_dev *dev, + u8 *buf, unsigned int len, + struct i2c_msg *pmsg) +{ + int cnt, byte, rc; + enum bsc_xfer_cmd cmd; + u32 ctl_reg; + struct bsc_regs *pi2creg = dev->bsc_regmap; + int no_ack = pmsg->flags & I2C_M_IGNORE_NAK; + + /* see if the transaction needs to check NACK conditions */ + if (no_ack || len <= N_DATA_BYTES) { + cmd = (pmsg->flags & I2C_M_RD) ? CMD_RD_NOACK + : CMD_WR_NOACK; + pi2creg->ctlhi_reg |= BSC_CTLHI_REG_IGNORE_ACK_MASK; + } else { + cmd = (pmsg->flags & I2C_M_RD) ? CMD_RD : CMD_WR; + pi2creg->ctlhi_reg &= ~BSC_CTLHI_REG_IGNORE_ACK_MASK; + } + bsc_writel(dev, pi2creg->ctlhi_reg, ctlhi_reg); + + /* set data transfer direction */ + ctl_reg = pi2creg->ctl_reg & ~BSC_CTL_REG_DTF_MASK; + if (cmd == CMD_WR || cmd == CMD_WR_NOACK) + pi2creg->ctl_reg = ctl_reg | DTF_WR_MASK; + else + pi2creg->ctl_reg = ctl_reg | DTF_RD_MASK; + + /* set the read/write length */ + bsc_writel(dev, BSC_CNT_REG1_MASK & (len << BSC_CNT_REG1_SHIFT), + cnt_reg); + + /* Write data into data_in register */ + if (cmd == CMD_WR || cmd == CMD_WR_NOACK) { + for (cnt = 0; cnt < len; cnt += 4) { + u32 word = 0; + + for (byte = 0; byte < 4; byte++) { + word >>= 8; + if ((cnt + byte) < len) + word |= buf[cnt + byte] << 24; + } + bsc_writel(dev, word, data_in[cnt >> 2]); + } + } + + /* Initiate xfer, the function will return on completion */ + rc = brcmstb_send_i2c_cmd(dev, cmd); + + if (rc != 0) { + dev_dbg(dev->device, "%s failure", cmd_string[cmd]); + return rc; + } + + if (cmd == CMD_RD || cmd == CMD_RD_NOACK) { + for (cnt = 0; cnt < len; cnt += 4) { + u32 data = bsc_readl(dev, data_out[cnt >> 2]); + + for (byte = 0; byte < 4 && + (byte + cnt) < len; byte++) { + buf[cnt + byte] = data & 0xff; + data >>= 8; + } + } + } + + return 0; +} + +/* Write a single byte of data to the i2c bus */ +static int brcmstb_i2c_write_data_byte(struct brcmstb_i2c_dev *dev, + u8 *buf, unsigned int nak_expected) +{ + enum bsc_xfer_cmd cmd = nak_expected ? CMD_WR : CMD_WR_NOACK; + + bsc_writel(dev, 1, cnt_reg); + bsc_writel(dev, *buf, data_in); + + return brcmstb_send_i2c_cmd(dev, cmd); +} + +/* Send i2c address */ +static int brcmstb_i2c_do_addr(struct brcmstb_i2c_dev *dev, + struct i2c_msg *msg) +{ + unsigned char addr; + + if (msg->flags & I2C_M_TEN) { + /* First byte is 11110XX0 where XX is upper 2 bits */ + addr = 0xF0 | ((msg->addr & 0x300) >> 7); + bsc_writel(dev, addr, chip_address); + + /* Second byte is the remaining 8 bits */ + addr = msg->addr & 0xFF; + if (brcmstb_i2c_write_data_byte(dev, &addr, 0) < 0) + return -EREMOTEIO; + + if (msg->flags & I2C_M_RD) { + /* For read, send restart without stop condition */ + brcmstb_set_i2c_start_stop(dev, COND_RESTART + | COND_NOSTOP); + /* Then re-send the first byte with the read bit set */ + addr = 0xF0 | ((msg->addr & 0x300) >> 7) | 0x01; + if (brcmstb_i2c_write_data_byte(dev, &addr, 0) < 0) + return -EREMOTEIO; + + } + } else { + addr = msg->addr << 1; + if (msg->flags & I2C_M_RD) + addr |= 1; + + bsc_writel(dev, addr, chip_address); + } + + return 0; +} + +/* Master transfer function */ +static int brcmstb_i2c_xfer(struct i2c_adapter *adapter, + struct i2c_msg msgs[], int num) +{ + struct brcmstb_i2c_dev *dev = i2c_get_adapdata(adapter); + struct i2c_msg *pmsg; + int rc = 0; + int i; + int bytes_to_xfer; + u8 *tmp_buf; + int len = 0; + + if (dev->is_suspended) + return -EBUSY; + + /* Loop through all messages */ + for (i = 0; i < num; i++) { + pmsg = &msgs[i]; + len = pmsg->len; + tmp_buf = pmsg->buf; + + dev_dbg(dev->device, + "msg# %d/%d flg %x buf %x len %d\n", i, + num - 1, pmsg->flags, + pmsg->buf ? pmsg->buf[0] : '0', pmsg->len); + + if (i < (num - 1) && (msgs[i + 1].flags & I2C_M_NOSTART)) + brcmstb_set_i2c_start_stop(dev, ~(COND_START_STOP)); + else + brcmstb_set_i2c_start_stop(dev, + COND_RESTART | COND_NOSTOP); + + /* Send slave address */ + if (!(pmsg->flags & I2C_M_NOSTART)) { + rc = brcmstb_i2c_do_addr(dev, pmsg); + if (rc < 0) { + dev_dbg(dev->device, + "NACK for addr %2.2x msg#%d rc = %d\n", + pmsg->addr, i, rc); + goto out; + } + } + + /* Perform data transfer */ + while (len) { + bytes_to_xfer = min(len, N_DATA_BYTES); + + if (len <= N_DATA_BYTES && i == (num - 1)) + brcmstb_set_i2c_start_stop(dev, + ~(COND_START_STOP)); + + rc = brcmstb_i2c_xfer_bsc_data(dev, tmp_buf, + bytes_to_xfer, pmsg); + if (rc < 0) + goto out; + + len -= bytes_to_xfer; + tmp_buf += bytes_to_xfer; + } + } + + rc = num; +out: + return rc; + +} + +static u32 brcmstb_i2c_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR + | I2C_FUNC_NOSTART | I2C_FUNC_PROTOCOL_MANGLING; +} + +static const struct i2c_algorithm brcmstb_i2c_algo = { + .master_xfer = brcmstb_i2c_xfer, + .functionality = brcmstb_i2c_functionality, +}; + +static void brcmstb_i2c_set_bus_speed(struct brcmstb_i2c_dev *dev) +{ + int i = 0, num_speeds = ARRAY_SIZE(bsc_clk); + u32 clk_freq_hz = dev->clk_freq_hz; + + for (i = 0; i < num_speeds; i++) { + if (bsc_clk[i].hz == clk_freq_hz) { + dev->bsc_regmap->ctl_reg &= ~(BSC_CTL_REG_SCL_SEL_MASK + | BSC_CTL_REG_DIV_CLK_MASK); + dev->bsc_regmap->ctl_reg |= (bsc_clk[i].scl_mask | + bsc_clk[i].div_mask); + bsc_writel(dev, dev->bsc_regmap->ctl_reg, ctl_reg); + break; + } + } + + /* in case we did not get find a valid speed */ + if (i == num_speeds) { + i = (bsc_readl(dev, ctl_reg) & BSC_CTL_REG_SCL_SEL_MASK) >> + BSC_CTL_REG_SCL_SEL_SHIFT; + dev_warn(dev->device, "leaving current clock-frequency @ %dHz\n", + bsc_clk[i].hz); + } +} + +static void brcmstb_i2c_set_bsc_reg_defaults(struct brcmstb_i2c_dev *dev) +{ + /* 4 byte data register */ + dev->bsc_regmap->ctlhi_reg = BSC_CTLHI_REG_DATAREG_SIZE_MASK; + bsc_writel(dev, dev->bsc_regmap->ctlhi_reg, ctlhi_reg); + /* set bus speed */ + brcmstb_i2c_set_bus_speed(dev); +} + +static int brcmstb_i2c_probe(struct platform_device *pdev) +{ + int rc = 0; + struct brcmstb_i2c_dev *dev; + struct i2c_adapter *adap; + struct resource *iomem; + const char *int_name; + + /* Allocate memory for private data structure */ + dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL); + if (!dev) + return -ENOMEM; + + dev->bsc_regmap = devm_kzalloc(&pdev->dev, sizeof(struct bsc_regs *), + GFP_KERNEL); + if (!dev->bsc_regmap) + return -ENOMEM; + + platform_set_drvdata(pdev, dev); + dev->device = &pdev->dev; + init_completion(&dev->done); + + /* Map hardware registers */ + iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + dev->base = devm_ioremap_resource(dev->device, iomem); + if (IS_ERR(dev->base)) { + rc = -ENOMEM; + goto probe_errorout; + } + + rc = of_property_read_string(dev->device->of_node, "interrupt-names", + &int_name); + if (rc < 0) + int_name = NULL; + + /* Get the interrupt number */ + dev->irq = platform_get_irq(pdev, 0); + + /* disable the bsc interrupt line */ + brcmstb_i2c_enable_disable_irq(dev, INT_DISABLE); + + /* register the ISR handler */ + rc = devm_request_irq(&pdev->dev, dev->irq, brcmstb_i2c_isr, + IRQF_SHARED, + int_name ? int_name : pdev->name, + dev); + + if (rc) { + dev_dbg(dev->device, "falling back to polling mode"); + dev->irq = -1; + } + + if (of_property_read_u32(dev->device->of_node, + "clock-frequency", &dev->clk_freq_hz)) { + dev_warn(dev->device, "setting clock-frequency@%dHz\n", + bsc_clk[0].hz); + dev->clk_freq_hz = bsc_clk[0].hz; + } + + brcmstb_i2c_set_bsc_reg_defaults(dev); + + /* Add the i2c adapter */ + adap = &dev->adapter; + i2c_set_adapdata(adap, dev); + adap->owner = THIS_MODULE; + strlcpy(adap->name, "Broadcom STB : ", sizeof(adap->name)); + if (int_name) + strlcat(adap->name, int_name, sizeof(adap->name)); + adap->algo = &brcmstb_i2c_algo; + adap->dev.parent = &pdev->dev; + adap->dev.of_node = pdev->dev.of_node; + rc = i2c_add_adapter(adap); + if (rc) { + dev_err(dev->device, "failed to add adapter\n"); + goto probe_errorout; + } + + dev_info(dev->device, "%s@%dhz registered in %s mode\n", + int_name ? int_name : " ", dev->clk_freq_hz, + (dev->irq >= 0) ? "interrupt" : "polling"); + + return 0; + +probe_errorout: + return rc; +} + +static int brcmstb_i2c_remove(struct platform_device *pdev) +{ + struct brcmstb_i2c_dev *dev = platform_get_drvdata(pdev); + + i2c_del_adapter(&dev->adapter); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int brcmstb_i2c_suspend(struct device *dev) +{ + struct brcmstb_i2c_dev *i2c_dev = dev_get_drvdata(dev); + + i2c_lock_adapter(&i2c_dev->adapter); + i2c_dev->is_suspended = true; + i2c_unlock_adapter(&i2c_dev->adapter); + + return 0; +} + +static int brcmstb_i2c_resume(struct device *dev) +{ + struct brcmstb_i2c_dev *i2c_dev = dev_get_drvdata(dev); + + i2c_lock_adapter(&i2c_dev->adapter); + brcmstb_i2c_set_bsc_reg_defaults(i2c_dev); + i2c_dev->is_suspended = false; + i2c_unlock_adapter(&i2c_dev->adapter); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(brcmstb_i2c_pm, brcmstb_i2c_suspend, + brcmstb_i2c_resume); + +static const struct of_device_id brcmstb_i2c_of_match[] = { + {.compatible = "brcm,brcmstb-i2c"}, + {}, +}; +MODULE_DEVICE_TABLE(of, brcmstb_i2c_of_match); + +static struct platform_driver brcmstb_i2c_driver = { + .driver = { + .name = "brcmstb-i2c", + .of_match_table = brcmstb_i2c_of_match, + .pm = &brcmstb_i2c_pm, + }, + .probe = brcmstb_i2c_probe, + .remove = brcmstb_i2c_remove, +}; +module_platform_driver(brcmstb_i2c_driver); + +MODULE_AUTHOR("Kamal Dasu <kdasu@broadcom.com>"); +MODULE_DESCRIPTION("Broadcom Settop I2C Driver"); +MODULE_LICENSE("GPL v2"); |