diff options
| -rw-r--r-- | arch/arm/boot/dts/omap3-evm-37xx.dts | 102 | ||||
| -rw-r--r-- | arch/arm/boot/dts/omap3-evm-common.dtsi | 33 |
2 files changed, 135 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index 4f9a76544602..c963b31ec3b3 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -34,7 +34,15 @@ >; }; +&hsusb2_phy { + pinctrl-names = "default"; + pinctrl-0 = <&ehci_phy_pins>; +}; + &omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = <&on_board_gpio_61 &hsusb2_pins>; + dss_dpi_pins1: pinmux_dss_dpi_pins2 { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ @@ -98,6 +106,37 @@ >; }; + /* Devices are routed with gpmc_nbe1.gpio_61 to on-board devices */ + on_board_gpio_61: pinmux_ehci_port_select_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20c8, PIN_OUTPUT | MUX_MODE4) + >; + }; + + /* Used by OHCI and EHCI. OHCI won't work without external phy */ + hsusb2_pins: pinmux_hsusb2_pins { + pinctrl-single,pins = < + + /* mcspi1_cs3.hsusb2_data2 */ + OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_clk.hsusb2_data7 */ + OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_simo.hsusb2_data4 */ + OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_somi.hsusb2_data5 */ + OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_cs0.hsusb2_data6 */ + OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_cs1.hsusb2_data3 */ + OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) + >; + }; + wl12xx_gpio: pinmux_wl12xx_gpio { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4) /* uart1_cts.gpio_150 */ @@ -112,6 +151,46 @@ }; }; +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_2_pins>; + + ehci_phy_pins: pinmux_ehci_phy_pins { + pinctrl-single,pins = < + + /* EHCI PHY reset GPIO etk_d7.gpio_21 */ + OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) + + /* EHCI VBUS etk_d8.gpio_22 */ + OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) + >; + }; + + /* Used by OHCI and EHCI. OHCI won't work without external phy */ + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + + /* etk_d10.hsusb2_clk */ + OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) + + /* etk_d11.hsusb2_stp */ + OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) + + /* etk_d12.hsusb2_dir */ + OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* etk_d13.hsusb2_nxt */ + OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* etk_d14.hsusb2_data0 */ + OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* etk_d15.hsusb2_data1 */ + OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) + >; + }; +}; + &omap3_pmx_wkup { dss_dpi_pins2: pinmux_dss_dpi_pins1 { pinctrl-single,pins = < @@ -153,6 +232,29 @@ pinctrl-0 = <&uart3_pins>; }; +/* + * GPIO_61 (nUSB2_EN_1V8) must be low to enable on-board EHCI USB2 interface + * for bus switch SN74CB3Q3384A, level-shifter SN74AVC16T245DGGR, and 1.8V. + */ +&gpio2 { + en_usb2_port { + gpio-hog; + gpios = <29 GPIO_ACTIVE_HIGH>; /* gpio_61 */ + output-low; + line-name = "enable usb2 port"; + }; +}; + +/* T2_GPIO_2 low to route GPIO_61 to on-board devices */ +&twl_gpio { + en_on_board_gpio_61 { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "en_hsusb2_clk"; + }; +}; + &gpmc { ranges = <0 0 0x30000000 0x1000000>, /* CS0: 16MB for NAND */ <5 0 0x2c000000 0x01000000>; diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi index 7780e2528697..2b1d6977a535 100644 --- a/arch/arm/boot/dts/omap3-evm-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -12,6 +12,24 @@ }; }; + /* HS USB Port 2 Power */ + hsusb2_power: hsusb2_power_reg { + compatible = "regulator-fixed"; + regulator-name = "hsusb2_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; /* gpio_22 */ + startup-delay-us = <70000>; + enable-active-high; + }; + + /* HS USB Host PHY on PORT 2 */ + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */ + vcc-supply = <&hsusb2_power>; + }; + leds { compatible = "gpio-leds"; ledb { @@ -142,6 +160,14 @@ >; }; +&usbhshost { + port2-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy>; +}; + &usb_otg_hs { interface-type = <0>; usb-phy = <&usb2_phy>; @@ -158,3 +184,10 @@ reg = <5 0 0xff>; }; }; + +&vaux2 { + regulator-name = "usb_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; |