diff options
363 files changed, 13492 insertions, 3648 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-cdx b/Documentation/ABI/testing/sysfs-bus-cdx index 7af477f49998..8c067ff99e54 100644 --- a/Documentation/ABI/testing/sysfs-bus-cdx +++ b/Documentation/ABI/testing/sysfs-bus-cdx @@ -28,14 +28,57 @@ Description: of a device manufacturer. Combination of Vendor ID and Device ID identifies a device. +What: /sys/bus/cdx/devices/.../subsystem_vendor +Date: July 2023 +Contact: puneet.gupta@amd.com +Description: + Subsystem Vendor ID for this CDX device, in hexadecimal. + Subsystem Vendor ID is 16 bit identifier specific to the + card manufacturer. + +What: /sys/bus/cdx/devices/.../subsystem_device +Date: July 2023 +Contact: puneet.gupta@amd.com +Description: + Subsystem Device ID for this CDX device, in hexadecimal + Subsystem Device ID is 16 bit identifier specific to the + card manufacturer. + +What: /sys/bus/cdx/devices/.../class +Date: July 2023 +Contact: puneet.gupta@amd.com +Description: + This file contains the class of the CDX device, in hexadecimal. + Class is 24 bit identifier specifies the functionality of the device. + +What: /sys/bus/cdx/devices/.../revision +Date: July 2023 +Contact: puneet.gupta@amd.com +Description: + This file contains the revision field of the CDX device, in hexadecimal. + Revision is 8 bit revision identifier of the device. + +What: /sys/bus/cdx/devices/.../enable +Date: October 2023 +Contact: abhijit.gangurde@amd.com +Description: + CDX bus should be disabled before updating the devices in FPGA. + Writing n/0/off will attempt to disable the CDX bus and. + writing y/1/on will attempt to enable the CDX bus. Reading this file + gives the current state of the bus, 1 for enabled and 0 for disabled. + + For example:: + + # echo 1 > /sys/bus/cdx/.../enable + What: /sys/bus/cdx/devices/.../reset Date: March 2023 Contact: nipun.gupta@amd.com Description: - Writing y/1/on to this file resets the CDX device. - On resetting the device, the corresponding driver is notified - twice, once before the device is being reset, and again after - the reset has been complete. + Writing y/1/on to this file resets the CDX device or all devices + on the bus. On resetting the device, the corresponding driver is + notified twice, once before the device is being reset, and again + after the reset has been complete. For example:: @@ -54,3 +97,18 @@ Description: For example:: # echo 1 > /sys/bus/cdx/devices/.../remove + +What: /sys/bus/cdx/devices/.../modalias +Date: July 2023 +Contact: nipun.gupta@amd.com +Description: + This attribute indicates the CDX ID of the device. + That is in the format: + cdx:vXXXXdXXXXsvXXXXsdXXXXcXXXXXX, + where: + + - vXXXX contains the vendor ID; + - dXXXX contains the device ID; + - svXXXX contains the subsystem vendor ID; + - sdXXXX contains the subsystem device ID; + - cXXXXXX contains the device class. diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index a2854dc9a839..19cde14f3869 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -279,6 +279,35 @@ Description: but should match other such assignments on device). Units after application of scale and offset are m/s^2. +What: /sys/bus/iio/devices/iio:deviceX/in_deltaangl_x_raw +What: /sys/bus/iio/devices/iio:deviceX/in_deltaangl_y_raw +What: /sys/bus/iio/devices/iio:deviceX/in_deltaangl_z_raw +KernelVersion: 6.5 +Contact: linux-iio@vger.kernel.org +Description: + Angular displacement between two consecutive samples on x, y or + z (may be arbitrarily assigned but should match other such + assignments on device). + In order to compute the total angular displacement during a + desired period of time, the application should sum-up the delta + angle samples acquired during that time. + Units after application of scale and offset are radians. + +What: /sys/bus/iio/devices/iio:deviceX/in_deltavelocity_x_raw +What: /sys/bus/iio/devices/iio:deviceX/in_deltavelocity_y_raw +What: /sys/bus/iio/devices/iio:deviceX/in_deltavelocity_z_raw +KernelVersion: 6.5 +Contact: linux-iio@vger.kernel.org +Description: + The linear velocity change between two consecutive samples on x, + y or z (may be arbitrarily assigned but should match other such + assignments on device). + In order to compute the total linear velocity change during a + desired period of time, the application should sum-up the delta + velocity samples acquired during that time. + Units after application of scale and offset are meters per + second. + What: /sys/bus/iio/devices/iio:deviceX/in_angl_raw What: /sys/bus/iio/devices/iio:deviceX/in_anglY_raw KernelVersion: 4.17 @@ -461,6 +490,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_scale What: /sys/bus/iio/devices/iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_scale What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_scale What: /sys/bus/iio/devices/iio:deviceX/in_countY_scale +What: /sys/bus/iio/devices/iio:deviceX/in_deltaangl_scale +What: /sys/bus/iio/devices/iio:deviceX/in_deltavelocity_scale What: /sys/bus/iio/devices/iio:deviceX/in_angl_scale What: /sys/bus/iio/devices/iio:deviceX/in_intensity_x_scale What: /sys/bus/iio/devices/iio:deviceX/in_intensity_y_scale @@ -1332,6 +1363,12 @@ Description: What: /sys/.../iio:deviceX/bufferY/in_accel_x_en What: /sys/.../iio:deviceX/bufferY/in_accel_y_en What: /sys/.../iio:deviceX/bufferY/in_accel_z_en +What: /sys/.../iio:deviceX/bufferY/in_deltaangl_x_en +What: /sys/.../iio:deviceX/bufferY/in_deltaangl_y_en +What: /sys/.../iio:deviceX/bufferY/in_deltaangl_z_en +What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_x_en +What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_y_en +What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_z_en What: /sys/.../iio:deviceX/bufferY/in_anglvel_x_en What: /sys/.../iio:deviceX/bufferY/in_anglvel_y_en What: /sys/.../iio:deviceX/bufferY/in_anglvel_z_en @@ -1362,6 +1399,8 @@ Description: Scan element control for triggered data capture. What: /sys/.../iio:deviceX/bufferY/in_accel_type +What: /sys/.../iio:deviceX/bufferY/in_deltaangl_type +What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_type What: /sys/.../iio:deviceX/bufferY/in_anglvel_type What: /sys/.../iio:deviceX/bufferY/in_magn_type What: /sys/.../iio:deviceX/bufferY/in_incli_type @@ -1416,6 +1455,12 @@ What: /sys/.../iio:deviceX/bufferY/in_voltage_q_index What: /sys/.../iio:deviceX/bufferY/in_accel_x_index What: /sys/.../iio:deviceX/bufferY/in_accel_y_index What: /sys/.../iio:deviceX/bufferY/in_accel_z_index +What: /sys/.../iio:deviceX/bufferY/in_deltaangl_x_index +What: /sys/.../iio:deviceX/bufferY/in_deltaangl_y_index +What: /sys/.../iio:deviceX/bufferY/in_deltaangl_z_index +What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_x_index +What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_y_index +What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_z_index What: /sys/.../iio:deviceX/bufferY/in_anglvel_x_index What: /sys/.../iio:deviceX/bufferY/in_anglvel_y_index What: /sys/.../iio:deviceX/bufferY/in_anglvel_z_index @@ -2179,3 +2224,33 @@ Contact: linux-iio@vger.kernel.org Description: Number of conditions that must occur, during a running period, before an event is generated. + +What: /sys/bus/iio/devices/iio:deviceX/in_colortemp_raw +KernelVersion: 6.7 +Contact: linux-iio@vger.kernel.org +Description: + Represents light color temperature, which measures light color + temperature in Kelvin. + +What: /sys/bus/iio/devices/iio:deviceX/in_chromaticity_x_raw +What: /sys/bus/iio/devices/iio:deviceX/in_chromaticity_y_raw +KernelVersion: 6.7 +Contact: linux-iio@vger.kernel.org +Description: + The x and y light color coordinate on the CIE 1931 chromaticity + diagram. + +What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltageY_mag_either_label +What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltageY_mag_rising_label +What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltageY_thresh_falling_label +What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltageY_thresh_rising_label +What: /sys/bus/iio/devices/iio:deviceX/events/in_anglvelY_mag_rising_label +What: /sys/bus/iio/devices/iio:deviceX/events/in_anglY_thresh_rising_label +What: /sys/bus/iio/devices/iio:deviceX/events/in_phaseY_mag_rising_label +KernelVersion: 6.7 +Contact: linux-iio@vger.kernel.org +Description: + Optional symbolic label to a device channel event. + If a label is defined for this event add that to the event + specific attributes. This is useful for userspace to be able to + better identify an individual event. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-mcp3564 b/Documentation/ABI/testing/sysfs-bus-iio-adc-mcp3564 new file mode 100644 index 000000000000..b168aa44b233 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-mcp3564 @@ -0,0 +1,53 @@ +What: /sys/bus/iio/devices/iio:deviceX/boost_current_gain +KernelVersion: 6.4 +Contact: linux-iio@vger.kernel.org +Description: + This attribute is used to set the gain of the biasing current + circuit of the Delta-Sigma modulator. The different BOOST + settings are applied to the entire modulator circuit, including + the voltage reference buffers. + +What: /sys/bus/iio/devices/iio:deviceX/boost_current_gain_available +KernelVersion: 6.4 +Contact: linux-iio@vger.kernel.org +Description: + Reading returns a list with the possible gain values for + the current biasing circuit of the Delta-Sigma modulator. + +What: /sys/bus/iio/devices/iio:deviceX/auto_zeroing_mux_enable +KernelVersion: 6.4 +Contact: linux-iio@vger.kernel.org +Description: + This attribute is used to enable the analog input multiplexer + auto-zeroing algorithm (the input multiplexer and the ADC + include an offset cancellation algorithm that cancels the offset + contribution of the ADC). When the offset cancellation algorithm + is enabled, ADC takes two conversions, one with the differential + input as VIN+/VIN-, one with VIN+/VIN- inverted. In this case the + conversion time is multiplied by two compared to the default + case where the algorithm is disabled. This technique allows the + cancellation of the ADC offset error and the achievement of + ultra-low offset without any digital calibration. The resulting + offset is the residue of the difference between the two + conversions, which is on the order of magnitude of the noise + floor. This offset is effectively canceled at every conversion, + so the residual offset error temperature drift is extremely low. + Write '1' to enable it, write '0' to disable it. + +What: /sys/bus/iio/devices/iio:deviceX/auto_zeroing_ref_enable +KernelVersion: 6.4 +Contact: linux-iio@vger.kernel.org +Description: + This attribute is used to enable the chopping algorithm for the + internal voltage reference buffer. This setting has no effect + when external voltage reference is selected. + Internal voltage reference buffer injects a certain quantity of + 1/f noise into the system that can be modulated with the + incoming input signals and can limit the SNR performance at + higher Oversampling Ratio values (over 256). To overcome this + limitation, the buffer includes an auto-zeroing algorithm that + greatly reduces (cancels out) the 1/f noise and cancels the + offset value of the reference buffer. As a result, the SNR of + the system is not affected by this 1/f noise component of the + reference buffer, even at maximum oversampling ratio values. + Write '1' to enable it, write '0' to disable it. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-resolver-ad2s1210 b/Documentation/ABI/testing/sysfs-bus-iio-resolver-ad2s1210 new file mode 100644 index 000000000000..f92c79342b93 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-resolver-ad2s1210 @@ -0,0 +1,27 @@ +What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltage0_mag_rising_reset_max +KernelVersion: 6.7 +Contact: linux-iio@vger.kernel.org +Description: + Reading returns the current Degradation of Signal Reset Maximum + Threshold value in millivolts. Writing sets the value. + +What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltage0_mag_rising_reset_max_available +KernelVersion: 6.7 +Contact: linux-iio@vger.kernel.org +Description: + Reading returns the allowable voltage range for + in_altvoltage0_mag_rising_reset_max. + +What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltage0_mag_rising_reset_min +KernelVersion: 6.7 +Contact: linux-iio@vger.kernel.org +Description: + Reading returns the current Degradation of Signal Reset Minimum + Threshold value in millivolts. Writing sets the value. + +What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltage0_mag_rising_reset_min_available +KernelVersion: 6.7 +Contact: linux-iio@vger.kernel.org +Description: + Reading returns the allowable voltage range for + in_altvoltage0_mag_rising_reset_min. diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml index 98139489d4b5..bfff71ff3d6a 100644 --- a/Documentation/devicetree/bindings/eeprom/at24.yaml +++ b/Documentation/devicetree/bindings/eeprom/at24.yaml @@ -12,6 +12,7 @@ maintainers: allOf: - $ref: /schemas/nvmem/nvmem.yaml + - $ref: /schemas/nvmem/nvmem-deprecated-cells.yaml select: properties: diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml index 986df1a6ff0a..66ea894dbe55 100644 --- a/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml +++ b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml @@ -4,19 +4,23 @@ $id: http://devicetree.org/schemas/iio/accel/kionix,kx022a.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: ROHM/Kionix KX022A Accelerometer +title: ROHM/Kionix KX022A, KX132-1211 and KX132ACR-LBZ Accelerometers maintainers: - Matti Vaittinen <mazziesaccount@gmail.com> description: | - KX022A is a 3-axis accelerometer supporting +/- 2G, 4G, 8G and 16G ranges, - output data-rates from 0.78Hz to 1600Hz and a hardware-fifo buffering. - KX022A can be accessed either via I2C or SPI. + KX022A, KX132ACR-LBZ and KX132-1211 are 3-axis accelerometers supporting + +/- 2G, 4G, 8G and 16G ranges, variable output data-rates and a + hardware-fifo buffering. These accelerometers can be accessed either + via I2C or SPI. properties: compatible: - const: kionix,kx022a + enum: + - kionix,kx022a + - kionix,kx132-1211 + - rohm,kx132acr-lbz reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml index 875f394576c2..5cc6a9684077 100644 --- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml @@ -4,21 +4,31 @@ $id: http://devicetree.org/schemas/iio/adc/lltc,ltc2497.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Linear Technology / Analog Devices LTC2497 ADC +title: Linear Technology / Analog Devices LTC2497 and LTC2309 ADC maintainers: - Michael Hennerich <michael.hennerich@analog.com> + - Liam Beguin <liambeguin@gmail.com> description: | - 16bit ADC supporting up to 16 single ended or 8 differential inputs. - I2C interface. + LTC2309: + low noise, low power, 8-channel, 12-bit successive approximation ADC with an + I2C compatible serial interface. - https://www.analog.com/media/en/technical-documentation/data-sheets/2497fb.pdf - https://www.analog.com/media/en/technical-documentation/data-sheets/2499fe.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/2309fd.pdf + + LTC2497: + LTC2499: + 16bit ADC supporting up to 16 single ended or 8 differential inputs. + I2C interface. + + https://www.analog.com/media/en/technical-documentation/data-sheets/2497fb.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/2499fe.pdf properties: compatible: enum: + - lltc,ltc2309 - lltc,ltc2497 - lltc,ltc2499 diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3564.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3564.yaml new file mode 100644 index 000000000000..675319276197 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3564.yaml @@ -0,0 +1,205 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/microchip,mcp3564.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip MCP346X and MCP356X ADC Family + +maintainers: + - Marius Cristea <marius.cristea@microchip.com> + +description: | + Bindings for the Microchip family of 153.6 ksps, Low-Noise 16/24-Bit + Delta-Sigma ADCs with an SPI interface. Datasheet can be found here: + Datasheet for MCP3561, MCP3562, MCP3564 can be found here: + https://ww1.microchip.com/downloads/aemDocuments/documents/MSLD/ProductDocuments/DataSheets/MCP3561-2-4-Family-Data-Sheet-DS20006181C.pdf + Datasheet for MCP3561R, MCP3562R, MCP3564R can be found here: + https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3561_2_4R-Data-Sheet-DS200006391C.pdf + Datasheet for MCP3461, MCP3462, MCP3464 can be found here: + https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3461-2-4-Two-Four-Eight-Channel-153.6-ksps-Low-Noise-16-Bit-Delta-Sigma-ADC-Data-Sheet-20006180D.pdf + Datasheet for MCP3461R, MCP3462R, MCP3464R can be found here: + https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3461-2-4R-Family-Data-Sheet-DS20006404C.pdf + +properties: + compatible: + enum: + - microchip,mcp3461 + - microchip,mcp3462 + - microchip,mcp3464 + - microchip,mcp3461r + - microchip,mcp3462r + - microchip,mcp3464r + - microchip,mcp3561 + - microchip,mcp3562 + - microchip,mcp3564 + - microchip,mcp3561r + - microchip,mcp3562r + - microchip,mcp3564r + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 20000000 + + spi-cpha: true + + spi-cpol: true + + vdd-supply: true + + avdd-supply: true + + clocks: + description: + Phandle and clock identifier for external sampling clock. + If not specified, the internal crystal oscillator will be used. + maxItems: 1 + + interrupts: + description: IRQ line of the ADC + maxItems: 1 + + drive-open-drain: + description: + Whether to drive the IRQ signal as push-pull (default) or open-drain. Note + that the device requires this pin to become "high", otherwise it will stop + converting. + type: boolean + + vref-supply: + description: + Some devices have a specific reference voltage supplied on a different + pin to the other supplies. Needed to be able to establish channel scaling + unless there is also an internal reference available (e.g. mcp3564r). In + case of "r" devices (e. g. mcp3564r), if it does not exists the internal + reference will be used. + + microchip,hw-device-address: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + description: + The address is set on a per-device basis by fuses in the factory, + configured on request. If not requested, the fuses are set for 0x1. + The device address is part of the device markings to avoid + potential confusion. This address is coded on two bits, so four possible + addresses are available when multiple devices are present on the same + SPI bus with only one Chip Select line for all devices. + Each device communication starts by a CS falling edge, followed by the + clocking of the device address (BITS[7:6] - top two bits of COMMAND BYTE + which is first one on the wire). + + "#io-channel-cells": + const: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^channel@([0-9]|([1-7][0-9]))$": + $ref: adc.yaml + type: object + unevaluatedProperties: false + description: Represents the external channels which are connected to the ADC. + + properties: + reg: + description: The channel number in single-ended and differential mode. + minimum: 0 + maximum: 79 + + required: + - reg + +dependencies: + spi-cpol: [ spi-cpha ] + spi-cpha: [ spi-cpol ] + +required: + - compatible + - reg + - microchip,hw-device-address + - spi-max-frequency + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + - # External vref, no internal reference + if: + properties: + compatible: + contains: + enum: + - microchip,mcp3461 + - microchip,mcp3462 + - microchip,mcp3464 + - microchip,mcp3561 + - microchip,mcp3562 + - microchip,mcp3564 + then: + required: + - vref-supply + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "microchip,mcp3564r"; + reg = <0>; + vref-supply = <&vref_reg>; + spi-cpha; + spi-cpol; + spi-max-frequency = <10000000>; + microchip,hw-device-address = <1>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + /* CH0 to AGND */ + reg = <0>; + label = "CH0"; + }; + + channel@1 { + /* CH1 to AGND */ + reg = <1>; + label = "CH1"; + }; + + /* diff-channels */ + channel@11 { + reg = <11>; + + /* CN0, CN1 */ + diff-channels = <0 1>; + label = "CH0_CH1"; + }; + + channel@22 { + reg = <0x22>; + + /* CN1, CN2 */ + diff-channels = <1 2>; + label = "CH1_CH3"; + }; + + channel@23 { + reg = <0x23>; + + /* CN1, CN3 */ + diff-channels = <1 3>; + label = "CH1_CH3"; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml index f7b3fde4115a..06951ec5f5da 100644 --- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml @@ -18,7 +18,13 @@ description: | properties: compatible: enum: + - microchip,mcp3910 - microchip,mcp3911 + - microchip,mcp3912 + - microchip,mcp3913 + - microchip,mcp3914 + - microchip,mcp3918 + - microchip,mcp3919 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml index e004659099c1..d605999ffe28 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml @@ -23,6 +23,9 @@ properties: reg: maxItems: 1 + interrupts: + maxItems: 1 + "#address-cells": const: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/ti,twl6030-gpadc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,twl6030-gpadc.yaml new file mode 100644 index 000000000000..e779a8986e0b --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,twl6030-gpadc.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,twl6030-gpadc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPADC subsystem in the TWL6030 power module + +maintainers: + - Andreas Kemnade <andreas@kemnade.info> + +description: + The GPADC subsystem in the TWL603X consists of a 10-bit ADC + combined with a 15-input analog multiplexer in the TWL6030 resp. a + 19-input analog muliplexer in the TWL6032. + +properties: + compatible: + enum: + - ti,twl6030-gpadc + - ti,twl6032-gpadc + + interrupts: + maxItems: 1 + + "#io-channel-cells": + const: 1 + +required: + - compatible + - interrupts + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + gpadc { + compatible = "ti,twl6030-gpadc"; + interrupts = <3>; + #io-channel-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml index 9fda56fa49c3..2ee6080deac7 100644 --- a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml +++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml @@ -4,20 +4,26 @@ $id: http://devicetree.org/schemas/iio/amplifiers/adi,hmc425a.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: HMC425A 6-bit Digital Step Attenuator +title: Analog Devices HMC425A and similar Digital Step Attenuators maintainers: - Michael Hennerich <michael.hennerich@analog.com> description: | - Digital Step Attenuator IIO device with gpio interface. + Digital Step Attenuator IIO devices with gpio interface. + Offer various frequency and attenuation ranges. HMC425A 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 2.2 - 8.0 GHz - https://www.analog.com/media/en/technical-documentation/data-sheets/hmc425A.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/hmc425A.pdf + + HMC540S 1 dB LSB Silicon MMIC 4-Bit Digital Positive Control Attenuator, 0.1 - 8 GHz + https://www.analog.com/media/en/technical-documentation/data-sheets/hmc540s.pdf + properties: compatible: enum: - adi,hmc425a + - adi,hmc540s vcc-supply: true diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml index 1db6952ddca5..297b8a1a7ffb 100644 --- a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml +++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml @@ -48,6 +48,11 @@ properties: mount-matrix: true + invensense,level-shifter: + type: boolean + description: | + From ancient platform data struct: false: VLogic, true: VDD + i2c-gate: $ref: /schemas/i2c/i2c-controller.yaml unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml index ee8724ad33ab..28b667a9cb76 100644 --- a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml +++ b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml @@ -93,6 +93,9 @@ properties: wakeup-source: $ref: /schemas/types.yaml#/definitions/flag + mount-matrix: + description: an optional 3x3 mounting rotation matrix + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/iio/pressure/rohm,bm1390.yaml b/Documentation/devicetree/bindings/iio/pressure/rohm,bm1390.yaml new file mode 100644 index 000000000000..7c4ca6322bf8 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/rohm,bm1390.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/rohm,bm1390.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BM1390 pressure sensor + +maintainers: + - Matti Vaittinen <mazziesaccount@gmail.com> + +description: + BM1390GLV-Z is a pressure sensor which performs internal temperature + compensation for the MEMS. Pressure range is from 300 hPa to 1300 hPa + and sample averaging and IIR filtering is built in. Temperature + measurement is also supported. + +properties: + compatible: + const: rohm,bm1390glv-z + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + - vdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + pressure-sensor@5d { + compatible = "rohm,bm1390glv-z"; + reg = <0x5d>; + + interrupt-parent = <&gpio1>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + + vdd-supply = <&vdd>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/resolver/adi,ad2s1210.yaml b/Documentation/devicetree/bindings/iio/resolver/adi,ad2s1210.yaml new file mode 100644 index 000000000000..8980b3cd8337 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/resolver/adi,ad2s1210.yaml @@ -0,0 +1,177 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/resolver/adi,ad2s1210.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD2S1210 Resolver-to-Digital Converter + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + +description: | + The AD2S1210 is a complete 10-bit to 16-bit resolution tracking + resolver-to-digital converter, integrating an on-board programmable + sinusoidal oscillator that provides sine wave excitation for + resolvers. + + The AD2S1210 allows the user to read the angular position or the + angular velocity data directly from the parallel outputs or through + the serial interface. + + The mode of operation of the communication channel (parallel or serial) is + selected by the A0 and A1 input pins. In normal mode, data is latched by + toggling the SAMPLE line and can then be read directly. In configuration mode, + data is read or written using a register access scheme (address byte with + read/write flag and data byte). + + A1 A0 Result + 0 0 Normal mode - position output + 0 1 Normal mode - velocity output + 1 0 Reserved + 1 1 Configuration mode + + In normal mode, the resolution of the digital output is selected using + the RES0 and RES1 input pins. In configuration mode, the resolution is + selected by setting the RES0 and RES1 bits in the control register. + + RES1 RES0 Resolution (Bits) + 0 0 10 + 0 1 12 + 1 0 14 + 1 1 16 + + Note on SPI connections: The CS line on the AD2S1210 should hard-wired to + logic low and the WR/FSYNC line on the AD2S1210 should be connected to the + SPI CSn output of the SPI controller. + + Datasheet: + https://www.analog.com/media/en/technical-documentation/data-sheets/ad2s1210.pdf + +properties: + compatible: + const: adi,ad2s1210 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 25000000 + + spi-cpha: true + + avdd-supply: + description: + A 4.75 to 5.25 V regulator that powers the Analog Supply Voltage (AVDD) + pin. + + dvdd-supply: + description: + A 4.75 to 5.25 V regulator that powers the Digital Supply Voltage (DVDD) + pin. + + vdrive-supply: + description: + A 2.3 to 5.25 V regulator that powers the Logic Power Supply Input + (VDrive) pin. + + clocks: + maxItems: 1 + description: External oscillator clock (CLKIN). + + reset-gpios: + description: + GPIO connected to the /RESET pin. As the line needs to be low for the + reset to be active, it should be configured as GPIO_ACTIVE_LOW. + maxItems: 1 + + sample-gpios: + description: + GPIO connected to the /SAMPLE pin. As the line needs to be low to trigger + a sample, it should be configured as GPIO_ACTIVE_LOW. + maxItems: 1 + + mode-gpios: + description: + GPIO lines connected to the A0 and A1 pins. These pins select the data + transfer mode. + minItems: 2 + maxItems: 2 + + resolution-gpios: + description: + GPIO lines connected to the RES0 and RES1 pins. These pins select the + resolution of the digital output. If omitted, it is assumed that the + RES0 and RES1 pins are hard-wired to match the assigned-resolution-bits + property. + minItems: 2 + maxItems: 2 + + fault-gpios: + description: + GPIO lines connected to the LOT and DOS pins. These pins combined indicate + the type of fault present, if any. As these pins a pulled low to indicate + a fault condition, they should be configured as GPIO_ACTIVE_LOW. + minItems: 2 + maxItems: 2 + + adi,fixed-mode: + description: + This is used to indicate the selected mode if A0 and A1 are hard-wired + instead of connected to GPIOS (i.e. mode-gpios is omitted). + $ref: /schemas/types.yaml#/definitions/string + enum: [config, velocity, position] + + assigned-resolution-bits: + description: + Resolution of the digital output required by the application. This + determines the precision of the angle and/or the maximum speed that can + be measured. If resolution-gpios is omitted, it is assumed that RES0 and + RES1 are hard-wired to match this value. + enum: [10, 12, 14, 16] + +required: + - compatible + - reg + - spi-cpha + - avdd-supply + - dvdd-supply + - vdrive-supply + - clocks + - sample-gpios + - assigned-resolution-bits + +oneOf: + - required: + - mode-gpios + - required: + - adi,fixed-mode + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + resolver@0 { + compatible = "adi,ad2s1210"; + reg = <0>; + spi-max-frequency = <20000000>; + spi-cpha; + avdd-supply = <&avdd_regulator>; + dvdd-supply = <&dvdd_regulator>; + vdrive-supply = <&vdrive_regulator>; + clocks = <&ext_osc>; + sample-gpios = <&gpio0 90 GPIO_ACTIVE_LOW>; + mode-gpios = <&gpio0 86 0>, <&gpio0 87 0>; + resolution-gpios = <&gpio0 88 0>, <&gpio0 89 0>; + assigned-resolution-bits = <16>; + }; + }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8939.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8939.yaml new file mode 100644 index 000000000000..fd15ab5014fb --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8939.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,msm8939.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8939 Network-On-Chip interconnect + +maintainers: + - Konrad Dybcio <konradybcio@kernel.org> + +description: | + The Qualcomm MSM8939 interconnect providers support adjusting the + bandwidth requirements between the various NoC fabrics. + +allOf: + - $ref: qcom,rpm-common.yaml# + +properties: + compatible: + enum: + - qcom,msm8939-bimc + - qcom,msm8939-pcnoc + - qcom,msm8939-snoc + + reg: + maxItems: 1 + +patternProperties: + '^interconnect-[a-z0-9\-]+$': + type: object + $ref: qcom,rpm-common.yaml# + description: + The interconnect providers do not have a separate QoS register space, + but share parent's space. + + allOf: + - $ref: qcom,rpm-common.yaml# + + properties: + compatible: + const: qcom,msm8939-snoc-mm + + required: + - compatible + + unevaluatedProperties: false + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmcc.h> + + snoc: interconnect@580000 { + compatible = "qcom,msm8939-snoc"; + reg = <0x00580000 0x14000>; + #interconnect-cells = <1>; + }; + + bimc: interconnect@400000 { + compatible = "qcom,msm8939-bimc"; + reg = <0x00400000 0x62000>; + #interconnect-cells = <1>; + + snoc_mm: interconnect-snoc { + compatible = "qcom,msm8939-snoc-mm"; + #interconnect-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8996.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8996.yaml new file mode 100644 index 000000000000..e3f964aaad1b --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8996.yaml @@ -0,0 +1,126 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,msm8996.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8996 Network-On-Chip interconnect + +maintainers: + - Konrad Dybcio <konradybcio@kernel.org> + +description: | + The Qualcomm MSM8996 interconnect providers support adjusting the + bandwidth requirements between the various NoC fabrics. + +properties: + compatible: + enum: + - qcom,msm8996-a0noc + - qcom,msm8996-a1noc + - qcom,msm8996-a2noc + - qcom,msm8996-bimc + - qcom,msm8996-cnoc + - qcom,msm8996-mnoc + - qcom,msm8996-pnoc + - qcom,msm8996-snoc + + reg: + maxItems: 1 + + clock-names: + minItems: 1 + maxItems: 3 + + clocks: + minItems: 1 + maxItems: 3 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +allOf: + - $ref: qcom,rpm-common.yaml# + - if: + properties: + compatible: + const: qcom,msm8996-a0noc + + then: + properties: + clocks: + items: + - description: Aggregate0 System NoC AXI Clock. + - description: Aggregate0 Config NoC AHB Clock. + - description: Aggregate0 NoC MPU Clock. + + clock-names: + items: + - const: aggre0_snoc_axi + - const: aggre0_cnoc_ahb + - const: aggre0_noc_mpu_cfg + + required: + - power-domains + + - if: + properties: + compatible: + const: qcom,msm8996-mnoc + + then: + properties: + clocks: + items: + - description: CPU-NoC High-performance Bus Clock. + + clock-names: + const: iface + + - if: + properties: + compatible: + const: qcom,msm8996-a2noc + + then: + properties: + clocks: + items: + - description: Aggregate2 NoC UFS AXI Clock + - description: UFS AXI Clock + + clock-names: + items: + - const: aggre2_ufs_axi + - const: ufs_axi + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8996.h> + #include <dt-bindings/clock/qcom,mmcc-msm8996.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + + bimc: interconnect@408000 { + compatible = "qcom,msm8996-bimc"; + reg = <0x00408000 0x5a000>; + #interconnect-cells = <1>; + }; + + a0noc: interconnect@543000 { + compatible = "qcom,msm8996-a0noc"; + reg = <0x00543000 0x6000>; + #interconnect-cells = <1>; + clocks = <&gcc GCC_AGGRE0_SNOC_AXI_CLK>, + <&gcc GCC_AGGRE0_CNOC_AHB_CLK>, + <&gcc GCC_AGGRE0_NOC_MPU_CFG_AHB_CLK>; + clock-names = "aggre0_snoc_axi", + "aggre0_cnoc_ahb", + "aggre0_noc_mpu_cfg"; + power-domains = <&gcc AGGRE0_NOC_GDSC>; + }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml b/Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml index f65a2fe846de..b6c15314c5c5 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml @@ -13,6 +13,9 @@ description: | The Qualcomm QCM2290 interconnect providers support adjusting the bandwidth requirements between the various NoC fabrics. +allOf: + - $ref: qcom,rpm-common.yaml# + properties: reg: maxItems: 1 @@ -23,19 +26,6 @@ properties: - qcom,qcm2290-cnoc - qcom,qcm2290-snoc - '#interconnect-cells': - const: 1 - - clock-names: - items: - - const: bus - - const: bus_a - - clocks: - items: - - description: Bus Clock - - description: Bus A Clock - # Child node's properties patternProperties: '^interconnect-[a-z0-9]+$': @@ -44,6 +34,9 @@ patternProperties: The interconnect providers do not have a separate QoS register space, but share parent's space. + allOf: + - $ref: qcom,rpm-common.yaml# + properties: compatible: enum: @@ -51,35 +44,16 @@ patternProperties: - qcom,qcm2290-mmrt-virt - qcom,qcm2290-mmnrt-virt - '#interconnect-cells': - const: 1 - - clock-names: - items: - - const: bus - - const: bus_a - - clocks: - items: - - description: Bus Clock - - description: Bus A Clock - required: - compatible - - '#interconnect-cells' - - clock-names - - clocks - additionalProperties: false + unevaluatedProperties: false required: - compatible - reg - - '#interconnect-cells' - - clock-names - - clocks -additionalProperties: false +unevaluatedProperties: false examples: - | @@ -89,32 +63,20 @@ examples: compatible = "qcom,qcm2290-snoc"; reg = <0x01880000 0x60200>; #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_SNOC_CLK>, - <&rpmcc RPM_SMD_SNOC_A_CLK>; qup_virt: interconnect-qup { compatible = "qcom,qcm2290-qup-virt"; #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_QUP_CLK>, - <&rpmcc RPM_SMD_QUP_A_CLK>; }; mmnrt_virt: interconnect-mmnrt { compatible = "qcom,qcm2290-mmnrt-virt"; #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_MMNRT_CLK>, - <&rpmcc RPM_SMD_MMNRT_A_CLK>; }; mmrt_virt: interconnect-mmrt { compatible = "qcom,qcm2290-mmrt-virt"; #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_MMRT_CLK>, - <&rpmcc RPM_SMD_MMRT_A_CLK>; }; }; @@ -122,16 +84,10 @@ examples: compatible = "qcom,qcm2290-cnoc"; reg = <0x01900000 0x8200>; #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_CNOC_CLK>, - <&rpmcc RPM_SMD_CNOC_A_CLK>; }; bimc: interconnect@4480000 { compatible = "qcom,qcm2290-bimc"; reg = <0x04480000 0x80000>; #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_BIMC_CLK>, - <&rpmcc RPM_SMD_BIMC_A_CLK>; }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpm-common.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpm-common.yaml new file mode 100644 index 000000000000..1ea52b091609 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpm-common.yaml @@ -0,0 +1,28 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,rpm-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm RPMh Network-On-Chip Interconnect + +maintainers: + - Konrad Dybcio <konradybcio@kernel.org> + +description: + RPM interconnect providers support for managing system bandwidth requirements + through manual requests based on either predefined values or as indicated by + the bus monitor hardware. Each provider node represents a NoC bus master, + driven by a dedicated clock source. + +properties: + '#interconnect-cells': + oneOf: + - const: 2 + - const: 1 + deprecated: true + +required: + - '#interconnect-cells' + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml index 4f95d512012a..08c1c6b9d7cf 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml @@ -7,13 +7,16 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm RPM Network-On-Chip Interconnect maintainers: - - Georgi Djakov <georgi.djakov@linaro.org> + - Georgi Djakov <djakov@kernel.org> description: | RPM interconnect providers support system bandwidth requirements through RPM processor. The provider is able to communicate with the RPM through the RPM shared memory device. +allOf: + - $ref: qcom,rpm-common.yaml# + properties: reg: maxItems: 1 @@ -23,259 +26,22 @@ properties: - qcom,msm8916-bimc - qcom,msm8916-pcnoc - qcom,msm8916-snoc - - qcom,msm8939-bimc - - qcom,msm8939-pcnoc - - qcom,msm8939-snoc - - qcom,msm8996-a0noc - - qcom,msm8996-a1noc - - qcom,msm8996-a2noc - - qcom,msm8996-bimc - - qcom,msm8996-cnoc - - qcom,msm8996-mnoc - - qcom,msm8996-pnoc - - qcom,msm8996-snoc - qcom,qcs404-bimc - qcom,qcs404-pcnoc - qcom,qcs404-snoc - - qcom,sdm660-a2noc - - qcom,sdm660-bimc - - qcom,sdm660-cnoc - - qcom,sdm660-gnoc - - qcom,sdm660-mnoc - - qcom,sdm660-snoc - - '#interconnect-cells': - description: | - Value: <1> is one cell in an interconnect specifier for the - interconnect node id, <2> requires the interconnect node id and an - extra path tag. - enum: [ 1, 2 ] - - clocks: - minItems: 2 - maxItems: 7 - - clock-names: - minItems: 2 - maxItems: 7 - - power-domains: - maxItems: 1 - -# Child node's properties -patternProperties: - '^interconnect-[a-z0-9]+$': - type: object - additionalProperties: false - description: - snoc-mm is a child of snoc, sharing snoc's register address space. - - properties: - compatible: - enum: - - qcom,msm8939-snoc-mm - - '#interconnect-cells': - const: 1 - - clock-names: - items: - - const: bus - - const: bus_a - - clocks: - items: - - description: Bus Clock - - description: Bus A Clock - - required: - - compatible - - '#interconnect-cells' - - clock-names - - clocks required: - compatible - reg - - '#interconnect-cells' - - clock-names - - clocks - -additionalProperties: false - -allOf: - - if: - properties: - compatible: - contains: - enum: - - qcom,msm8916-bimc - - qcom,msm8916-pcnoc - - qcom,msm8916-snoc - - qcom,msm8939-bimc - - qcom,msm8939-pcnoc - - qcom,msm8939-snoc - - qcom,msm8996-a1noc - - qcom,msm8996-bimc - - qcom,msm8996-cnoc - - qcom,msm8996-pnoc - - qcom,msm8996-snoc - - qcom,qcs404-bimc - - qcom,qcs404-pcnoc - - qcom,qcs404-snoc - - qcom,sdm660-bimc - - qcom,sdm660-cnoc - - qcom,sdm660-gnoc - - qcom,sdm660-snoc - - then: - properties: - clock-names: - items: - - const: bus - - const: bus_a - - clocks: - items: - - description: Bus Clock - - description: Bus A Clock - - if: - properties: - compatible: - contains: - enum: - - qcom,msm8996-mnoc - - qcom,sdm660-mnoc - - then: - properties: - clock-names: - items: - - const: bus - - const: bus_a - - const: iface - - clocks: - items: - - description: Bus Clock. - - description: Bus A Clock. - - description: CPU-NoC High-performance Bus Clock. - - - if: - properties: - compatible: - contains: - enum: - - qcom,msm8996-a0noc - - then: - properties: - clock-names: - items: - - const: aggre0_snoc_axi - - const: aggre0_cnoc_ahb - - const: aggre0_noc_mpu_cfg - - clocks: - items: - - description: Aggregate0 System NoC AXI Clock. - - description: Aggregate0 Config NoC AHB Clock. - - description: Aggregate0 NoC MPU Clock. - - required: - - power-domains - - - if: - properties: - compatible: - contains: - enum: - - qcom,msm8996-a2noc - - then: - properties: - clock-names: - items: - - const: bus - - const: bus_a - - const: aggre2_ufs_axi - - const: ufs_axi - - clocks: - items: - - description: Bus Clock - - description: Bus A Clock - - description: Aggregate2 NoC UFS AXI Clock - - description: UFS AXI Clock - - - if: - properties: - compatible: - contains: - enum: - - qcom,sdm660-a2noc - - then: - properties: - clock-names: - items: - - const: bus - - const: bus_a - - const: ipa - - const: ufs_axi - - const: aggre2_ufs_axi - - const: aggre2_usb3_axi - - const: cfg_noc_usb2_axi - - clocks: - items: - - description: Bus Clock. - - description: Bus A Clock. - - description: IPA Clock. - - description: UFS AXI Clock. - - description: Aggregate2 UFS AXI Clock. - - description: Aggregate2 USB3 AXI Clock. - - description: Config NoC USB2 AXI Clock. - - - if: - not: - properties: - compatible: - contains: - enum: - - qcom,msm8939-snoc - then: - patternProperties: - '^interconnect-[a-z0-9]+$': false +unevaluatedProperties: false examples: - | #include <dt-bindings/clock/qcom,rpmcc.h> bimc: interconnect@400000 { - compatible = "qcom,msm8916-bimc"; - reg = <0x00400000 0x62000>; - #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_BIMC_CLK>, - <&rpmcc RPM_SMD_BIMC_A_CLK>; - }; - - pcnoc: interconnect@500000 { - compatible = "qcom,msm8916-pcnoc"; - reg = <0x00500000 0x11000>; - #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_PCNOC_CLK>, - <&rpmcc RPM_SMD_PCNOC_A_CLK>; - }; - - snoc: interconnect@580000 { - compatible = "qcom,msm8916-snoc"; - reg = <0x00580000 0x14000>; - #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_SNOC_CLK>, - <&rpmcc RPM_SMD_SNOC_A_CLK>; + compatible = "qcom,msm8916-bimc"; + reg = <0x00400000 0x62000>; + #interconnect-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml index a46497af1fd8..74ab080249ff 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml @@ -113,6 +113,7 @@ allOf: properties: compatible: enum: + - qcom,sdx65-mc-virt - qcom,sm8250-qup-virt then: required: diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml new file mode 100644 index 000000000000..8f6bc6399626 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,sdm660.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SDM660 Network-On-Chip interconnect + +maintainers: + - Konrad Dybcio <konradybcio@kernel.org> + +description: | + The Qualcomm SDM660 interconnect providers support adjusting the + bandwidth requirements between the various NoC fabrics. + +properties: + compatible: + enum: + - qcom,sdm660-a2noc + - qcom,sdm660-bimc + - qcom,sdm660-cnoc + - qcom,sdm660-gnoc + - qcom,sdm660-mnoc + - qcom,sdm660-snoc + + reg: + maxItems: 1 + + clock-names: + minItems: 1 + maxItems: 5 + + clocks: + minItems: 1 + maxItems: 5 + +required: + - compatible + - reg + +unevaluatedProperties: false + +allOf: + - $ref: qcom,rpm-common.yaml# + - if: + properties: + compatible: + const: qcom,sdm660-mnoc + + then: + properties: + clocks: + items: + - description: CPU-NoC High-performance Bus Clock. + + clock-names: + const: iface + + - if: + properties: + compatible: + const: qcom,sdm660-a2noc + + then: + properties: + clocks: + items: + - description: IPA Clock. + - description: UFS AXI Clock. + - description: Aggregate2 UFS AXI Clock. + - description: Aggregate2 USB3 AXI Clock. + - description: Config NoC USB2 AXI Clock. + + clock-names: + items: + - const: ipa + - const: ufs_axi + - const: aggre2_ufs_axi + - const: aggre2_usb3_axi + - const: cfg_noc_usb2_axi + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sdm660.h> + #include <dt-bindings/clock/qcom,mmcc-sdm660.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + + bimc: interconnect@1008000 { + compatible = "qcom,sdm660-bimc"; + reg = <0x01008000 0x78000>; + #interconnect-cells = <1>; + }; + + a2noc: interconnect@1704000 { + compatible = "qcom,sdm660-a2noc"; + reg = <0x01704000 0xc100>; + #interconnect-cells = <1>; + clocks = <&rpmcc RPM_SMD_IPA_CLK>, + <&gcc GCC_UFS_AXI_CLK>, + <&gcc GCC_AGGRE2_UFS_AXI_CLK>, + <&gcc GCC_AGGRE2_USB3_AXI_CLK>, + <&gcc GCC_CFG_NOC_USB2_AXI_CLK>; + clock-names = "ipa", + "ufs_axi", + "aggre2_ufs_axi", + "aggre2_usb3_axi", + "cfg_noc_usb2_axi"; + }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sdx75-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sdx75-rpmh.yaml new file mode 100644 index 000000000000..71cf7e252bfc --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,sdx75-rpmh.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,sdx75-rpmh.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm RPMh Network-On-Chip Interconnect on SDX75 + +maintainers: + - Rohit Agarwal <quic_rohiagar@quicinc.com> + +description: + RPMh interconnect providers support system bandwidth requirements through + RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is + able to communicate with the BCM through the Resource State Coordinator (RSC) + associated with each execution environment. Provider nodes must point to at + least one RPMh device child node pertaining to their RSC and each provider + can map to multiple RPMh resources. + +properties: + compatible: + enum: + - qcom,sdx75-clk-virt + - qcom,sdx75-dc-noc + - qcom,sdx75-gem-noc + - qcom,sdx75-mc-virt + - qcom,sdx75-pcie-anoc + - qcom,sdx75-system-noc + + '#interconnect-cells': true + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + +allOf: + - $ref: qcom,rpmh-common.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,sdx75-clk-virt + - qcom,sdx75-mc-virt + then: + properties: + reg: false + else: + required: + - reg + + - if: + properties: + compatible: + contains: + enum: + - qcom,sdx75-clk-virt + then: + properties: + clocks: + items: + - description: RPMH CC QPIC Clock + required: + - clocks + else: + properties: + clocks: false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + + clk_virt: interconnect-0 { + compatible = "qcom,sdx75-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&rpmhcc RPMH_QPIC_CLK>; + }; + + system_noc: interconnect@1640000 { + compatible = "qcom,sdx75-system-noc"; + reg = <0x1640000 0x4b400>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; diff --git a/Documentation/devicetree/bindings/mtd/mtd.yaml b/Documentation/devicetree/bindings/mtd/mtd.yaml index b82ca03e969c..f322290ee516 100644 --- a/Documentation/devicetree/bindings/mtd/mtd.yaml +++ b/Documentation/devicetree/bindings/mtd/mtd.yaml @@ -43,7 +43,12 @@ patternProperties: deprecated: true "^otp(-[0-9]+)?$": - $ref: ../nvmem/nvmem.yaml# + type: object + + allOf: + - $ref: ../nvmem/nvmem.yaml# + - $ref: ../nvmem/nvmem-deprecated-cells.yaml# + unevaluatedProperties: false description: | diff --git a/Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml b/Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml index 5474d63268dc..9518281007af 100644 --- a/Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml +++ b/Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml @@ -19,6 +19,7 @@ maintainers: allOf: - $ref: /schemas/mtd/partitions/partition.yaml# - $ref: /schemas/nvmem/nvmem.yaml# + - $ref: /schemas/nvmem/nvmem-deprecated-cells.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml b/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml new file mode 100644 index 000000000000..3dde10de4630 --- /dev/null +++ b/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ti,cc1352p7.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments Simplelink CC1352P7 wireless MCU + +description: + The CC1352P7 MCU can be connected via SPI or UART. + +maintainers: + - Ayush Singh <ayushdevel1325@gmail.com> + +properties: + compatible: + const: ti,cc1352p7 + + clocks: + items: + - description: high-frequency main system (MCU and peripherals) clock + - description: low-frequency system clock + + clock-names: + items: + - const: sclk_hf + - const: sclk_lf + + reset-gpios: + maxItems: 1 + + vdds-supply: true + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + serial { + mcu { + compatible = "ti,cc1352p7"; + clocks = <&sclk_hf 0>, <&sclk_lf 25>; + clock-names = "sclk_hf", "sclk_lf"; + reset-gpios = <&pio 35 GPIO_ACTIVE_LOW>; + vdds-supply = <&vdds>; + }; + }; diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml index 0928ec408170..4424c3c5e75c 100644 --- a/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml +++ b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml @@ -12,6 +12,7 @@ maintainers: allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/amlogic,meson-gxbb-efuse.yaml b/Documentation/devicetree/bindings/nvmem/amlogic,meson-gxbb-efuse.yaml index e49c2754ff55..9801fe6f91b5 100644 --- a/Documentation/devicetree/bindings/nvmem/amlogic,meson-gxbb-efuse.yaml +++ b/Documentation/devicetree/bindings/nvmem/amlogic,meson-gxbb-efuse.yaml @@ -11,6 +11,7 @@ maintainers: allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/amlogic,meson6-efuse.yaml b/Documentation/devicetree/bindings/nvmem/amlogic,meson6-efuse.yaml index 84b3dfd21e09..b5cf740f96fa 100644 --- a/Documentation/devicetree/bindings/nvmem/amlogic,meson6-efuse.yaml +++ b/Documentation/devicetree/bindings/nvmem/amlogic,meson6-efuse.yaml @@ -12,6 +12,7 @@ maintainers: allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml b/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml index e0860b6b85f3..d3abdafdbca0 100644 --- a/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml +++ b/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml @@ -16,6 +16,7 @@ maintainers: allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml index 99e60d713dac..be1314454bec 100644 --- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml +++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml @@ -16,6 +16,7 @@ description: | allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml index 7ec2988b597e..cf5f9e22bb7e 100644 --- a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml +++ b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml @@ -16,6 +16,7 @@ maintainers: allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml# properties: $nodename: diff --git a/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml b/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml index a296d348adb4..cc25f2927682 100644 --- a/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml +++ b/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml @@ -16,6 +16,7 @@ description: | allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml index a9b822aeaa7e..f43186f98607 100644 --- a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml +++ b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml @@ -11,6 +11,7 @@ maintainers: allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/nvmem-deprecated-cells.yaml b/Documentation/devicetree/bindings/nvmem/nvmem-deprecated-cells.yaml new file mode 100644 index 000000000000..951af28bbfb3 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/nvmem-deprecated-cells.yaml @@ -0,0 +1,28 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/nvmem-deprecated-cells.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVMEM old syntax for fixed cells + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + Before introducing NVMEM layouts all NVMEM (fixed) cells were defined + as direct device subnodes. That syntax was replaced by "fixed-layout" + and is deprecated now. No new bindings should use it. + +patternProperties: + "@[0-9a-f]+(,[0-7])?$": + type: object + allOf: + - $ref: layouts/fixed-cell.yaml + - properties: + compatible: false + deprecated: true + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.yaml b/Documentation/devicetree/bindings/nvmem/nvmem.yaml index 9f921d940142..4fd015d402ce 100644 --- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml +++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml @@ -46,15 +46,6 @@ properties: container may reference more advanced (dynamic) layout parsers. -patternProperties: - "@[0-9a-f]+(,[0-7])?$": - type: object - allOf: - - $ref: layouts/fixed-cell.yaml - - properties: - compatible: false - deprecated: true - additionalProperties: true examples: diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml index 8740938c32eb..8c8f05d9eaf1 100644 --- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml +++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml @@ -11,6 +11,7 @@ maintainers: allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/qcom,sec-qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,sec-qfprom.yaml index 9b133f783d29..2ada2099946d 100644 --- a/Documentation/devicetree/bindings/nvmem/qcom,sec-qfprom.yaml +++ b/Documentation/devicetree/bindings/nvmem/qcom,sec-qfprom.yaml @@ -16,6 +16,7 @@ description: allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml index cd980def97b8..068bedf5dbc9 100644 --- a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml +++ b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml @@ -16,6 +16,7 @@ description: | allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml b/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml index 9c6eff788928..a44d44b32809 100644 --- a/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml +++ b/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml @@ -49,6 +49,7 @@ required: allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml# - if: properties: diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml index c5403e149080..b80fd8d1ae5b 100644 --- a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml +++ b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml @@ -11,6 +11,7 @@ maintainers: allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml b/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml index efccc5aacbe0..e27cbae2d63a 100644 --- a/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml +++ b/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml @@ -12,6 +12,7 @@ maintainers: allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml index da3f1de7d281..af97eeb8316c 100644 --- a/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml +++ b/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml @@ -12,6 +12,7 @@ maintainers: allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml b/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml index 36d97fb87865..9c36afc7084b 100644 --- a/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml +++ b/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml @@ -51,6 +51,8 @@ properties: ethaddr: type: object description: Ethernet interfaces base MAC address. + additionalProperties: false + properties: "#nvmem-cell-cells": description: The first argument is a MAC address offset. diff --git a/Documentation/devicetree/bindings/rtc/amlogic,meson6-rtc.yaml b/Documentation/devicetree/bindings/rtc/amlogic,meson6-rtc.yaml index 8bf7d3a9be98..3a4551253e3e 100644 --- a/Documentation/devicetree/bindings/rtc/amlogic,meson6-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/amlogic,meson6-rtc.yaml @@ -13,6 +13,7 @@ maintainers: allOf: - $ref: rtc.yaml# - $ref: /schemas/nvmem/nvmem.yaml# + - $ref: /schemas/nvmem/nvmem-deprecated-cells.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 9a1443ec3aaa..64b2ef083fdf 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -346,6 +346,8 @@ properties: # Silicon Labs SI3210 Programmable CMOS SLIC/CODEC with SPI interface - silabs,si3210 # Relative Humidity and Temperature Sensors + - silabs,si7005 + # Relative Humidity and Temperature Sensors - silabs,si7020 # Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply - skyworks,sky81452 diff --git a/Documentation/devicetree/bindings/usb/realtek,rtd-type-c.yaml b/Documentation/devicetree/bindings/usb/realtek,rtd-type-c.yaml new file mode 100644 index 000000000000..6142b0b5b534 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/realtek,rtd-type-c.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2023 Realtek Semiconductor Corporation +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/realtek,rtd-type-c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek DHC RTD SoCs USB Type-C Connector detection + +maintainers: + - Stanley Chang <stanley_chang@realtek.com> + +description: + Realtek digital home center (DHC) RTD series SoCs include a type c module. + This module is able to detect the state of type c connector. + +properties: + compatible: + enum: + - realtek,rtd1295-type-c + - realtek,rtd1312c-type-c + - realtek,rtd1315e-type-c + - realtek,rtd1319-type-c + - realtek,rtd1319d-type-c + - realtek,rtd1395-type-c + - realtek,rtd1619-type-c + - realtek,rtd1619b-type-c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + nvmem-cell-names: + items: + - const: usb-cal + + nvmem-cells: + maxItems: 1 + description: + The phandle to nvmem cell that contains the trimming data. + The type c parameter trimming data specified via efuse. + If unspecified, default value is used. + + realtek,rd-ctrl-gpios: + description: The gpio node to control external Rd on board. + maxItems: 1 + + connector: + $ref: /schemas/connector/usb-connector.yaml# + description: Properties for usb c connector. + type: object + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + type-c@7220 { + compatible = "realtek,rtd1619b-type-c"; + reg = <0x7220 0x20>; + interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&usb_cc1_pins>, <&usb_cc2_pins>; + nvmem-cells = <&otp_usb_cal>; + nvmem-cell-names = "usb-cal"; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + power-role = "dual"; + }; + }; diff --git a/Documentation/misc-devices/eeprom.rst b/Documentation/misc-devices/eeprom.rst deleted file mode 100644 index 008249675ccc..000000000000 --- a/Documentation/misc-devices/eeprom.rst +++ /dev/null @@ -1,107 +0,0 @@ -==================== -Kernel driver eeprom -==================== - -Supported chips: - - * Any EEPROM chip in the designated address range - - Prefix: 'eeprom' - - Addresses scanned: I2C 0x50 - 0x57 - - Datasheets: Publicly available from: - - Atmel (www.atmel.com), - Catalyst (www.catsemi.com), - Fairchild (www.fairchildsemi.com), - Microchip (www.microchip.com), - Philips (www.semiconductor.philips.com), - Rohm (www.rohm.com), - ST (www.st.com), - Xicor (www.xicor.com), - and others. - - ========= ============= ============================================ - Chip Size (bits) Address - ========= ============= ============================================ - 24C01 1K 0x50 (shadows at 0x51 - 0x57) - 24C01A 1K 0x50 - 0x57 (Typical device on DIMMs) - 24C02 2K 0x50 - 0x57 - 24C04 4K 0x50, 0x52, 0x54, 0x56 - (additional data at 0x51, 0x53, 0x55, 0x57) - 24C08 8K 0x50, 0x54 (additional data at 0x51, 0x52, - 0x53, 0x55, 0x56, 0x57) - 24C16 16K 0x50 (additional data at 0x51 - 0x57) - Sony 2K 0x57 - - Atmel 34C02B 2K 0x50 - 0x57, SW write protect at 0x30-37 - Catalyst 34FC02 2K 0x50 - 0x57, SW write protect at 0x30-37 - Catalyst 34RC02 2K 0x50 - 0x57, SW write protect at 0x30-37 - Fairchild 34W02 2K 0x50 - 0x57, SW write protect at 0x30-37 - Microchip 24AA52 2K 0x50 - 0x57, SW write protect at 0x30-37 - ST M34C02 2K 0x50 - 0x57, SW write protect at 0x30-37 - ========= ============= ============================================ - - -Authors: - - Frodo Looijaard <frodol@dds.nl>, - - Philip Edelbrock <phil@netroedge.com>, - - Jean Delvare <jdelvare@suse.de>, - - Greg Kroah-Hartman <greg@kroah.com>, - - IBM Corp. - -Description ------------ - -This is a simple EEPROM module meant to enable reading the first 256 bytes -of an EEPROM (on a SDRAM DIMM for example). However, it will access serial -EEPROMs on any I2C adapter. The supported devices are generically called -24Cxx, and are listed above; however the numbering for these -industry-standard devices may vary by manufacturer. - -This module was a programming exercise to get used to the new project -organization laid out by Frodo, but it should be at least completely -effective for decoding the contents of EEPROMs on DIMMs. - -DIMMS will typically contain a 24C01A or 24C02, or the 34C02 variants. -The other devices will not be found on a DIMM because they respond to more -than one address. - -DDC Monitors may contain any device. Often a 24C01, which responds to all 8 -addresses, is found. - -Recent Sony Vaio laptops have an EEPROM at 0x57. We couldn't get the -specification, so it is guess work and far from being complete. - -The Microchip 24AA52/24LCS52, ST M34C02, and others support an additional -software write protect register at 0x30 - 0x37 (0x20 less than the memory -location). The chip responds to "write quick" detection at this address but -does not respond to byte reads. If this register is present, the lower 128 -bytes of the memory array are not write protected. Any byte data write to -this address will write protect the memory array permanently, and the -device will no longer respond at the 0x30-37 address. The eeprom driver -does not support this register. - -Lacking functionality ---------------------- - -* Full support for larger devices (24C04, 24C08, 24C16). These are not - typically found on a PC. These devices will appear as separate devices at - multiple addresses. - -* Support for really large devices (24C32, 24C64, 24C128, 24C256, 24C512). - These devices require two-byte address fields and are not supported. - -* Enable Writing. Again, no technical reason why not, but making it easy - to change the contents of the EEPROMs (on DIMMs anyway) also makes it easy - to disable the DIMMs (potentially preventing the computer from booting) - until the values are restored somehow. - -Use ---- - -After inserting the module (and any other required SMBus/i2c modules), you -should have some EEPROM directories in ``/sys/bus/i2c/devices/*`` of names such -as "0-0050". Inside each of these is a series of files, the eeprom file -contains the binary data from EEPROM. diff --git a/Documentation/misc-devices/index.rst b/Documentation/misc-devices/index.rst index ecc40fbbcfb8..7de16797987a 100644 --- a/Documentation/misc-devices/index.rst +++ b/Documentation/misc-devices/index.rst @@ -17,7 +17,6 @@ fit into other categories. ad525x_dpot apds990x bh1770glc - eeprom c2port dw-xdata-pcie ibmvmc diff --git a/Documentation/process/stable-kernel-rules.rst b/Documentation/process/stable-kernel-rules.rst index 41f1e07abfdf..1704f1c686d0 100644 --- a/Documentation/process/stable-kernel-rules.rst +++ b/Documentation/process/stable-kernel-rules.rst @@ -101,6 +101,19 @@ comment: git cherry-pick fd21073 git cherry-pick <this commit> + Note that for a patch series, you do not have to list as prerequisites the + patches present in the series itself. For example, if you have the following + patch series: + + .. code-block:: none + + patch1 + patch2 + + where patch2 depends on patch1, you do not have to list patch1 as + prerequisite of patch2 if you have already marked patch1 for stable + inclusion. + * For patches that may have kernel version prerequisites specify them using the following format in the sign-off area: diff --git a/MAINTAINERS b/MAINTAINERS index 2fc476614c87..92907d32ead9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1119,7 +1119,7 @@ ANALOG DEVICES INC AD4130 DRIVER M: Cosmin Tanislav <cosmin.tanislav@analog.com> L: linux-iio@vger.kernel.org S: Supported -W: http://ez.analog.com/community/linux-device-drivers +W: https://ez.analog.com/linux-software-drivers F: Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130 F: Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml F: drivers/iio/adc/ad4130.c @@ -1152,7 +1152,7 @@ ANALOG DEVICES INC AD74115 DRIVER M: Cosmin Tanislav <cosmin.tanislav@analog.com> L: linux-iio@vger.kernel.org S: Supported -W: http://ez.analog.com/community/linux-device-drivers +W: https://ez.analog.com/linux-software-drivers F: Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml F: drivers/iio/addac/ad74115.c @@ -2075,12 +2075,16 @@ F: Documentation/trace/coresight/* F: drivers/hwtracing/coresight/* F: include/dt-bindings/arm/coresight-cti-dt.h F: include/linux/coresight* +F: include/uapi/linux/coresight* F: samples/coresight/* +F: tools/perf/Documentation/arm-coresight.txt F: tools/perf/arch/arm/util/auxtrace.c F: tools/perf/arch/arm/util/cs-etm.c F: tools/perf/arch/arm/util/cs-etm.h F: tools/perf/arch/arm/util/pmu.c +F: tools/perf/tests/shell/*coresight* F: tools/perf/tests/shell/coresight/* +F: tools/perf/tests/shell/lib/*coresight* F: tools/perf/util/cs-etm-decoder/* F: tools/perf/util/cs-etm.* @@ -9076,6 +9080,13 @@ F: drivers/staging/greybus/sdio.c F: drivers/staging/greybus/spi.c F: drivers/staging/greybus/spilib.c +GREYBUS BEAGLEPLAY DRIVERS +M: Ayush Singh <ayushdevel1325@gmail.com> +L: greybus-dev@lists.linaro.org (moderated for non-subscribers) +S: Maintained +F: Documentation/devicetree/bindings/net/ti,cc1352p7.yaml +F: drivers/greybus/gb-beagleplay.c + GREYBUS SUBSYSTEM M: Johan Hovold <johan@kernel.org> M: Alex Elder <elder@kernel.org> @@ -11993,12 +12004,6 @@ F: drivers/leds/ F: include/dt-bindings/leds/ F: include/linux/leds.h -LEGACY EEPROM DRIVER -M: Jean Delvare <jdelvare@suse.com> -S: Maintained -F: Documentation/misc-devices/eeprom.rst -F: drivers/misc/eeprom/eeprom.c - LEGO MINDSTORMS EV3 R: David Lechner <david@lechnology.com> S: Maintained @@ -12925,7 +12930,7 @@ MAX31827 TEMPERATURE SWITCH DRIVER M: Daniel Matyas <daniel.matyas@analog.com> L: linux-hwmon@vger.kernel.org S: Supported -W: http://ez.analog.com/community/linux-device-drivers +W: https://ez.analog.com/linux-software-drivers F: Documentation/devicetree/bindings/hwmon/adi,max31827.yaml F: Documentation/hwmon/max31827.rst F: drivers/hwmon/max31827.c @@ -14126,6 +14131,13 @@ S: Supported F: Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt F: drivers/regulator/mcp16502.c +MICROCHIP MCP3564 ADC DRIVER +M: Marius Cristea <marius.cristea@microchip.com> +L: linux-iio@vger.kernel.org +S: Supported +F: Documentation/devicetree/bindings/iio/adc/microchip,mcp3564.yaml +F: drivers/iio/adc/mcp3564.c + MICROCHIP MCP3911 ADC DRIVER M: Marcus Folkesson <marcus.folkesson@gmail.com> M: Kent Gustavsson <kent@minoris.se> @@ -18695,6 +18707,12 @@ S: Maintained F: Documentation/devicetree/bindings/iio/light/bh1750.yaml F: drivers/iio/light/bh1750.c +ROHM BM1390 PRESSURE SENSOR DRIVER +M: Matti Vaittinen <mazziesaccount@gmail.com> +L: linux-iio@vger.kernel.org +S: Supported +F: drivers/iio/pressure/rohm-bm1390.c + ROHM BU270xx LIGHT SENSOR DRIVERs M: Matti Vaittinen <mazziesaccount@gmail.com> L: linux-iio@vger.kernel.org diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts index 00891a0f8fc3..9a6bd0a3c94f 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts @@ -896,6 +896,12 @@ pinctrl-names = "default"; pinctrl-0 = <&wifi_debug_uart_pins_default>; status = "okay"; + + mcu { + compatible = "ti,cc1352p7"; + reset-gpios = <&main_gpio0 72 GPIO_ACTIVE_LOW>; + vdds-supply = <&vdd_3v3>; + }; }; &dss { diff --git a/drivers/accessibility/speakup/kobjects.c b/drivers/accessibility/speakup/kobjects.c index a7522d409802..0dfdb6608e02 100644 --- a/drivers/accessibility/speakup/kobjects.c +++ b/drivers/accessibility/speakup/kobjects.c @@ -413,27 +413,24 @@ static ssize_t synth_direct_store(struct kobject *kobj, struct kobj_attribute *attr, const char *buf, size_t count) { - u_char tmp[256]; - int len; - int bytes; - const char *ptr = buf; + char *unescaped; unsigned long flags; if (!synth) return -EPERM; - len = strlen(buf); + unescaped = kstrdup(buf, GFP_KERNEL); + if (!unescaped) + return -ENOMEM; + + string_unescape_any_inplace(unescaped); + spin_lock_irqsave(&speakup_info.spinlock, flags); - while (len > 0) { - bytes = min_t(size_t, len, 250); - strncpy(tmp, ptr, bytes); - tmp[bytes] = '\0'; - string_unescape_any_inplace(tmp); - synth_printf("%s", tmp); - ptr += bytes; - len -= bytes; - } + synth_write(unescaped, strlen(unescaped)); spin_unlock_irqrestore(&speakup_info.spinlock, flags); + + kfree(unescaped); + return count; } diff --git a/drivers/android/binderfs.c b/drivers/android/binderfs.c index 420dc9cbf774..1224ab7aa070 100644 --- a/drivers/android/binderfs.c +++ b/drivers/android/binderfs.c @@ -93,7 +93,7 @@ bool is_binderfs_device(const struct inode *inode) /** * binderfs_binder_device_create - allocate inode from super block of a * binderfs mount - * @ref_inode: inode from wich the super block will be taken + * @ref_inode: inode from which the super block will be taken * @userp: buffer to copy information about new device for userspace to * @req: struct binderfs_device as copied from userspace * diff --git a/drivers/cdx/Makefile b/drivers/cdx/Makefile index 0324e4914f6e..5d1ea482419f 100644 --- a/drivers/cdx/Makefile +++ b/drivers/cdx/Makefile @@ -5,4 +5,6 @@ # Copyright (C) 2022-2023, Advanced Micro Devices, Inc. # +ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE=CDX_BUS + obj-$(CONFIG_CDX_BUS) += cdx.o controller/ diff --git a/drivers/cdx/cdx.c b/drivers/cdx/cdx.c index 9efb7584f952..4461c6c9313f 100644 --- a/drivers/cdx/cdx.c +++ b/drivers/cdx/cdx.c @@ -60,7 +60,7 @@ #include <linux/of_device.h> #include <linux/slab.h> #include <linux/mm.h> -#include <linux/xarray.h> +#include <linux/idr.h> #include <linux/cdx/cdx_bus.h> #include <linux/iommu.h> #include <linux/dma-map-ops.h> @@ -70,8 +70,12 @@ #define CDX_DEFAULT_DMA_MASK (~0ULL) #define MAX_CDX_CONTROLLERS 16 -/* CDX controllers registered with the CDX bus */ -static DEFINE_XARRAY_ALLOC(cdx_controllers); +/* IDA for CDX controllers registered with the CDX bus */ +static DEFINE_IDA(cdx_controller_ida); +/* Lock to protect controller ops */ +static DEFINE_MUTEX(cdx_controller_lock); + +static char *compat_node_name = "xlnx,versal-net-cdx"; /** * cdx_dev_reset - Reset a CDX device @@ -107,6 +111,20 @@ int cdx_dev_reset(struct device *dev) EXPORT_SYMBOL_GPL(cdx_dev_reset); /** + * reset_cdx_device - Reset a CDX device + * @dev: CDX device + * @data: This is always passed as NULL, and is not used in this API, + * but is required here as the device_for_each_child() API expects + * the passed function to have this as an argument. + * + * Return: -errno on failure, 0 on success. + */ +static int reset_cdx_device(struct device *dev, void *data) +{ + return cdx_dev_reset(dev); +} + +/** * cdx_unregister_device - Unregister a CDX device * @dev: CDX device * @data: This is always passed as NULL, and is not used in this API, @@ -120,9 +138,17 @@ static int cdx_unregister_device(struct device *dev, void *data) { struct cdx_device *cdx_dev = to_cdx_device(dev); + struct cdx_controller *cdx = cdx_dev->cdx; + + if (cdx_dev->is_bus) { + device_for_each_child(dev, NULL, cdx_unregister_device); + if (cdx_dev->enabled && cdx->ops->bus_disable) + cdx->ops->bus_disable(cdx, cdx_dev->bus_num); + } else { + kfree(cdx_dev->driver_override); + cdx_dev->driver_override = NULL; + } - kfree(cdx_dev->driver_override); - cdx_dev->driver_override = NULL; /* * Do not free cdx_dev here as it would be freed in * cdx_device_release() called from within put_device(). @@ -153,7 +179,10 @@ cdx_match_one_device(const struct cdx_device_id *id, { /* Use vendor ID and device ID for matching */ if ((id->vendor == CDX_ANY_ID || id->vendor == dev->vendor) && - (id->device == CDX_ANY_ID || id->device == dev->device)) + (id->device == CDX_ANY_ID || id->device == dev->device) && + (id->subvendor == CDX_ANY_ID || id->subvendor == dev->subsystem_vendor) && + (id->subdevice == CDX_ANY_ID || id->subdevice == dev->subsystem_device) && + !((id->class ^ dev->class) & id->class_mask)) return id; return NULL; } @@ -229,6 +258,9 @@ static int cdx_bus_match(struct device *dev, struct device_driver *drv) const struct cdx_device_id *found_id = NULL; const struct cdx_device_id *ids; + if (cdx_dev->is_bus) + return false; + ids = cdx_drv->match_id_table; /* When driver_override is set, only bind to the matching driver */ @@ -293,10 +325,11 @@ static int cdx_dma_configure(struct device *dev) { struct cdx_driver *cdx_drv = to_cdx_driver(dev->driver); struct cdx_device *cdx_dev = to_cdx_device(dev); + struct cdx_controller *cdx = cdx_dev->cdx; u32 input_id = cdx_dev->req_id; int ret; - ret = of_dma_configure_id(dev, dev->parent->of_node, 0, &input_id); + ret = of_dma_configure_id(dev, cdx->dev->of_node, 0, &input_id); if (ret && ret != -EPROBE_DEFER) { dev_err(dev, "of_dma_configure_id() failed\n"); return ret; @@ -331,6 +364,10 @@ static DEVICE_ATTR_RO(field) cdx_config_attr(vendor, "0x%04x\n"); cdx_config_attr(device, "0x%04x\n"); +cdx_config_attr(subsystem_vendor, "0x%04x\n"); +cdx_config_attr(subsystem_device, "0x%04x\n"); +cdx_config_attr(revision, "0x%02x\n"); +cdx_config_attr(class, "0x%06x\n"); static ssize_t remove_store(struct device *dev, struct device_attribute *attr, @@ -359,6 +396,7 @@ static DEVICE_ATTR_WO(remove); static ssize_t reset_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { + struct cdx_device *cdx_dev = to_cdx_device(dev); bool val; int ret; @@ -368,14 +406,27 @@ static ssize_t reset_store(struct device *dev, struct device_attribute *attr, if (!val) return -EINVAL; - ret = cdx_dev_reset(dev); - if (ret) - return ret; + if (cdx_dev->is_bus) + /* Reset all the devices attached to cdx bus */ + ret = device_for_each_child(dev, NULL, reset_cdx_device); + else + ret = cdx_dev_reset(dev); - return count; + return ret < 0 ? ret : count; } static DEVICE_ATTR_WO(reset); +static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct cdx_device *cdx_dev = to_cdx_device(dev); + + return sprintf(buf, "cdx:v%04Xd%04Xsv%04Xsd%04Xc%06X\n", cdx_dev->vendor, + cdx_dev->device, cdx_dev->subsystem_vendor, cdx_dev->subsystem_device, + cdx_dev->class); +} +static DEVICE_ATTR_RO(modalias); + static ssize_t driver_override_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -402,21 +453,107 @@ static ssize_t driver_override_show(struct device *dev, } static DEVICE_ATTR_RW(driver_override); +static ssize_t enable_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct cdx_device *cdx_dev = to_cdx_device(dev); + struct cdx_controller *cdx = cdx_dev->cdx; + bool enable; + int ret; + + if (kstrtobool(buf, &enable) < 0) + return -EINVAL; + + if (enable == cdx_dev->enabled) + return count; + + if (enable && cdx->ops->bus_enable) + ret = cdx->ops->bus_enable(cdx, cdx_dev->bus_num); + else if (!enable && cdx->ops->bus_disable) + ret = cdx->ops->bus_disable(cdx, cdx_dev->bus_num); + else + ret = -EOPNOTSUPP; + + if (!ret) + cdx_dev->enabled = enable; + + return ret < 0 ? ret : count; +} + +static ssize_t enable_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct cdx_device *cdx_dev = to_cdx_device(dev); + + return sysfs_emit(buf, "%u\n", cdx_dev->enabled); +} +static DEVICE_ATTR_RW(enable); + +static umode_t cdx_dev_attrs_are_visible(struct kobject *kobj, struct attribute *a, int n) +{ + struct device *dev = kobj_to_dev(kobj); + struct cdx_device *cdx_dev; + + cdx_dev = to_cdx_device(dev); + if (!cdx_dev->is_bus) + return a->mode; + + return 0; +} + +static umode_t cdx_bus_attrs_are_visible(struct kobject *kobj, struct attribute *a, int n) +{ + struct device *dev = kobj_to_dev(kobj); + struct cdx_device *cdx_dev; + + cdx_dev = to_cdx_device(dev); + if (cdx_dev->is_bus) + return a->mode; + + return 0; +} + static struct attribute *cdx_dev_attrs[] = { &dev_attr_remove.attr, &dev_attr_reset.attr, &dev_attr_vendor.attr, &dev_attr_device.attr, + &dev_attr_subsystem_vendor.attr, + &dev_attr_subsystem_device.attr, + &dev_attr_class.attr, + &dev_attr_revision.attr, + &dev_attr_modalias.attr, &dev_attr_driver_override.attr, NULL, }; -ATTRIBUTE_GROUPS(cdx_dev); + +static const struct attribute_group cdx_dev_group = { + .attrs = cdx_dev_attrs, + .is_visible = cdx_dev_attrs_are_visible, +}; + +static struct attribute *cdx_bus_dev_attrs[] = { + &dev_attr_enable.attr, + &dev_attr_reset.attr, + NULL, +}; + +static const struct attribute_group cdx_bus_dev_group = { + .attrs = cdx_bus_dev_attrs, + .is_visible = cdx_bus_attrs_are_visible, +}; + +static const struct attribute_group *cdx_dev_groups[] = { + &cdx_dev_group, + &cdx_bus_dev_group, + NULL, +}; static ssize_t rescan_store(const struct bus_type *bus, const char *buf, size_t count) { struct cdx_controller *cdx; - unsigned long index; + struct platform_device *pd; + struct device_node *np; bool val; if (kstrtobool(buf, &val) < 0) @@ -425,18 +562,29 @@ static ssize_t rescan_store(const struct bus_type *bus, if (!val) return -EINVAL; + mutex_lock(&cdx_controller_lock); + /* Unregister all the devices on the bus */ cdx_unregister_devices(&cdx_bus_type); /* Rescan all the devices */ - xa_for_each(&cdx_controllers, index, cdx) { - int ret; + for_each_compatible_node(np, NULL, compat_node_name) { + if (!np) + return -EINVAL; - ret = cdx->ops->scan(cdx); - if (ret) - dev_err(cdx->dev, "cdx bus scanning failed\n"); + pd = of_find_device_by_node(np); + if (!pd) + return -EINVAL; + + cdx = platform_get_drvdata(pd); + if (cdx && cdx->controller_registered && cdx->ops->scan) + cdx->ops->scan(cdx); + + put_device(&pd->dev); } + mutex_unlock(&cdx_controller_lock); + return count; } static BUS_ATTR_WO(rescan); @@ -495,7 +643,6 @@ static void cdx_device_release(struct device *dev) int cdx_device_add(struct cdx_dev_params *dev_params) { struct cdx_controller *cdx = dev_params->cdx; - struct device *parent = cdx->dev; struct cdx_device *cdx_dev; int ret; @@ -512,6 +659,10 @@ int cdx_device_add(struct cdx_dev_params *dev_params) cdx_dev->req_id = dev_params->req_id; cdx_dev->vendor = dev_params->vendor; cdx_dev->device = dev_params->device; + cdx_dev->subsystem_vendor = dev_params->subsys_vendor; + cdx_dev->subsystem_device = dev_params->subsys_device; + cdx_dev->class = dev_params->class; + cdx_dev->revision = dev_params->revision; cdx_dev->bus_num = dev_params->bus_num; cdx_dev->dev_num = dev_params->dev_num; cdx_dev->cdx = dev_params->cdx; @@ -519,7 +670,7 @@ int cdx_device_add(struct cdx_dev_params *dev_params) /* Initialize generic device */ device_initialize(&cdx_dev->dev); - cdx_dev->dev.parent = parent; + cdx_dev->dev.parent = dev_params->parent; cdx_dev->dev.bus = &cdx_bus_type; cdx_dev->dev.dma_mask = &cdx_dev->dma_mask; cdx_dev->dev.release = cdx_device_release; @@ -546,37 +697,94 @@ fail: return ret; } -EXPORT_SYMBOL_GPL(cdx_device_add); +EXPORT_SYMBOL_NS_GPL(cdx_device_add, CDX_BUS_CONTROLLER); -int cdx_register_controller(struct cdx_controller *cdx) +struct device *cdx_bus_add(struct cdx_controller *cdx, u8 bus_num) { + struct cdx_device *cdx_dev; int ret; - ret = xa_alloc(&cdx_controllers, &cdx->id, cdx, - XA_LIMIT(0, MAX_CDX_CONTROLLERS - 1), GFP_KERNEL); + cdx_dev = kzalloc(sizeof(*cdx_dev), GFP_KERNEL); + if (!cdx_dev) + return NULL; + + device_initialize(&cdx_dev->dev); + cdx_dev->cdx = cdx; + + cdx_dev->dev.parent = cdx->dev; + cdx_dev->dev.bus = &cdx_bus_type; + cdx_dev->dev.release = cdx_device_release; + cdx_dev->is_bus = true; + cdx_dev->bus_num = bus_num; + + dev_set_name(&cdx_dev->dev, "cdx-%02x", + ((cdx->id << CDX_CONTROLLER_ID_SHIFT) | (bus_num & CDX_BUS_NUM_MASK))); + + ret = device_add(&cdx_dev->dev); if (ret) { + dev_err(&cdx_dev->dev, "cdx bus device add failed: %d\n", ret); + goto device_add_fail; + } + + if (cdx->ops->bus_enable) { + ret = cdx->ops->bus_enable(cdx, bus_num); + if (ret && ret != -EALREADY) { + dev_err(cdx->dev, "cdx bus enable failed: %d\n", ret); + goto bus_enable_fail; + } + } + + cdx_dev->enabled = true; + return &cdx_dev->dev; + +bus_enable_fail: + device_del(&cdx_dev->dev); +device_add_fail: + put_device(&cdx_dev->dev); + + return NULL; +} +EXPORT_SYMBOL_NS_GPL(cdx_bus_add, CDX_BUS_CONTROLLER); + +int cdx_register_controller(struct cdx_controller *cdx) +{ + int ret; + + ret = ida_alloc_range(&cdx_controller_ida, 0, MAX_CDX_CONTROLLERS - 1, GFP_KERNEL); + if (ret < 0) { dev_err(cdx->dev, "No free index available. Maximum controllers already registered\n"); cdx->id = (u8)MAX_CDX_CONTROLLERS; return ret; } + mutex_lock(&cdx_controller_lock); + cdx->id = ret; + /* Scan all the devices */ - cdx->ops->scan(cdx); + if (cdx->ops->scan) + cdx->ops->scan(cdx); + cdx->controller_registered = true; + mutex_unlock(&cdx_controller_lock); return 0; } -EXPORT_SYMBOL_GPL(cdx_register_controller); +EXPORT_SYMBOL_NS_GPL(cdx_register_controller, CDX_BUS_CONTROLLER); void cdx_unregister_controller(struct cdx_controller *cdx) { if (cdx->id >= MAX_CDX_CONTROLLERS) return; + mutex_lock(&cdx_controller_lock); + + cdx->controller_registered = false; device_for_each_child(cdx->dev, NULL, cdx_unregister_device); - xa_erase(&cdx_controllers, cdx->id); + ida_free(&cdx_controller_ida, cdx->id); + + mutex_unlock(&cdx_controller_lock); } -EXPORT_SYMBOL_GPL(cdx_unregister_controller); +EXPORT_SYMBOL_NS_GPL(cdx_unregister_controller, CDX_BUS_CONTROLLER); static int __init cdx_bus_init(void) { diff --git a/drivers/cdx/cdx.h b/drivers/cdx/cdx.h index c436ac7ac86f..300ad8be7a34 100644 --- a/drivers/cdx/cdx.h +++ b/drivers/cdx/cdx.h @@ -13,24 +13,33 @@ /** * struct cdx_dev_params - CDX device parameters * @cdx: CDX controller associated with the device - * @parent: Associated CDX controller + * @parent: Associated CDX Bus device * @vendor: Vendor ID for CDX device * @device: Device ID for CDX device + * @subsys_vendor: Sub vendor ID for CDX device + * @subsys_device: Sub device ID for CDX device * @bus_num: Bus number for this CDX device * @dev_num: Device number for this device * @res: array of MMIO region entries * @res_count: number of valid MMIO regions * @req_id: Requestor ID associated with CDX device + * @class: Class of the CDX Device + * @revision: Revision of the CDX device */ struct cdx_dev_params { struct cdx_controller *cdx; + struct device *parent; u16 vendor; u16 device; + u16 subsys_vendor; + u16 subsys_device; u8 bus_num; u8 dev_num; struct resource res[MAX_CDX_DEV_RESOURCES]; u8 res_count; u32 req_id; + u32 class; + u8 revision; }; /** @@ -59,4 +68,15 @@ void cdx_unregister_controller(struct cdx_controller *cdx); */ int cdx_device_add(struct cdx_dev_params *dev_params); +/** + * cdx_bus_add - Add a CDX bus. This function adds a bus on the CDX bus + * subsystem. It creates a CDX device for the corresponding bus and + * also registers an associated Linux generic device. + * @cdx: Associated CDX controller + * @us_num: Bus number + * + * Return: associated Linux generic device pointer on success or NULL on failure. + */ +struct device *cdx_bus_add(struct cdx_controller *cdx, u8 bus_num); + #endif /* _CDX_H_ */ diff --git a/drivers/cdx/controller/cdx_controller.c b/drivers/cdx/controller/cdx_controller.c index 7828dac8edb1..85fe4b1c4e5e 100644 --- a/drivers/cdx/controller/cdx_controller.c +++ b/drivers/cdx/controller/cdx_controller.c @@ -33,6 +33,16 @@ static const struct cdx_mcdi_ops mcdi_ops = { .mcdi_request = cdx_mcdi_request, }; +static int cdx_bus_enable(struct cdx_controller *cdx, u8 bus_num) +{ + return cdx_mcdi_bus_enable(cdx->priv, bus_num); +} + +static int cdx_bus_disable(struct cdx_controller *cdx, u8 bus_num) +{ + return cdx_mcdi_bus_disable(cdx->priv, bus_num); +} + void cdx_rpmsg_post_probe(struct cdx_controller *cdx) { /* Register CDX controller with CDX bus driver */ @@ -83,8 +93,14 @@ static int cdx_scan_devices(struct cdx_controller *cdx) num_cdx_bus = (u8)ret; for (bus_num = 0; bus_num < num_cdx_bus; bus_num++) { + struct device *bus_dev; u8 num_cdx_dev; + /* Add the bus on cdx subsystem */ + bus_dev = cdx_bus_add(cdx, bus_num); + if (!bus_dev) + continue; + /* MCDI FW Read: Fetch the number of devices present */ ret = cdx_mcdi_get_num_devs(cdx_mcdi, bus_num); if (ret < 0) { @@ -107,6 +123,7 @@ static int cdx_scan_devices(struct cdx_controller *cdx) continue; } dev_params.cdx = cdx; + dev_params.parent = bus_dev; /* Add the device to the cdx bus */ ret = cdx_device_add(&dev_params); @@ -125,6 +142,8 @@ static int cdx_scan_devices(struct cdx_controller *cdx) } static struct cdx_ops cdx_ops = { + .bus_enable = cdx_bus_enable, + .bus_disable = cdx_bus_disable, .scan = cdx_scan_devices, .dev_configure = cdx_configure_device, }; @@ -233,3 +252,4 @@ module_exit(cdx_controller_exit); MODULE_AUTHOR("AMD Inc."); MODULE_DESCRIPTION("CDX controller for AMD devices"); MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(CDX_BUS_CONTROLLER); diff --git a/drivers/cdx/controller/mc_cdx_pcol.h b/drivers/cdx/controller/mc_cdx_pcol.h index 4ccb7b52951b..2de019406b57 100644 --- a/drivers/cdx/controller/mc_cdx_pcol.h +++ b/drivers/cdx/controller/mc_cdx_pcol.h @@ -457,6 +457,60 @@ /***********************************/ /* + * MC_CMD_CDX_BUS_DOWN + * Asserting reset on the CDX bus causes all devices on the bus to be quiesced. + * DMA bus mastering is disabled and any pending DMA request are flushed. Once + * the response is returned, the devices are guaranteed to no longer issue DMA + * requests or raise MSI interrupts. Further device MMIO accesses may have + * undefined results. While the bus reset is asserted, any of the enumeration + * or device configuration MCDIs will fail with EAGAIN. It is only legal to + * reload the relevant PL region containing CDX devices if the corresponding CDX + * bus is in reset. Depending on the implementation, the firmware may or may + * not enforce this restriction and it is up to the caller to make sure this + * requirement is satisfied. + */ +#define MC_CMD_CDX_BUS_DOWN 0x4 +#define MC_CMD_CDX_BUS_DOWN_MSGSET 0x4 + +/* MC_CMD_CDX_BUS_DOWN_IN msgrequest */ +#define MC_CMD_CDX_BUS_DOWN_IN_LEN 4 +/* Bus number to put in reset, in range 0 to BUS_COUNT-1 */ +#define MC_CMD_CDX_BUS_DOWN_IN_BUS_OFST 0 +#define MC_CMD_CDX_BUS_DOWN_IN_BUS_LEN 4 + +/* + * MC_CMD_CDX_BUS_DOWN_OUT msgresponse: The bus is quiesced, no further + * upstream traffic for devices on this bus. + */ +#define MC_CMD_CDX_BUS_DOWN_OUT_LEN 0 + +/***********************************/ +/* + * MC_CMD_CDX_BUS_UP + * After bus reset is de-asserted, devices are in a state which is functionally + * equivalent to each device having been reset with MC_CMD_CDX_DEVICE_RESET. In + * other words, device logic is reset in a hardware-specific way, MMIO accesses + * are forwarded to the device, DMA bus mastering is disabled and needs to be + * re-enabled with MC_CMD_CDX_DEVICE_DMA_ENABLE once the driver is ready to + * start servicing DMA. If the underlying number of devices or device resources + * changed (e.g. if PL was reloaded) while the bus was in reset, the bus driver + * is expected to re-enumerate the bus. Returns EALREADY if the bus was already + * up before the call. + */ +#define MC_CMD_CDX_BUS_UP 0x5 +#define MC_CMD_CDX_BUS_UP_MSGSET 0x5 + +/* MC_CMD_CDX_BUS_UP_IN msgrequest */ +#define MC_CMD_CDX_BUS_UP_IN_LEN 4 +/* Bus number to take out of reset, in range 0 to BUS_COUNT-1 */ +#define MC_CMD_CDX_BUS_UP_IN_BUS_OFST 0 +#define MC_CMD_CDX_BUS_UP_IN_BUS_LEN 4 + +/* MC_CMD_CDX_BUS_UP_OUT msgresponse: The bus can now be enumerated. */ +#define MC_CMD_CDX_BUS_UP_OUT_LEN 0 + +/***********************************/ +/* * MC_CMD_CDX_DEVICE_RESET * After this call completes, device DMA and interrupts are quiesced, devices * logic is reset in a hardware-specific way and DMA bus mastering is disabled. diff --git a/drivers/cdx/controller/mcdi_functions.c b/drivers/cdx/controller/mcdi_functions.c index fc82435d5dea..b1f530946389 100644 --- a/drivers/cdx/controller/mcdi_functions.c +++ b/drivers/cdx/controller/mcdi_functions.c @@ -120,10 +120,41 @@ int cdx_mcdi_get_dev_config(struct cdx_mcdi *cdx, dev_params->vendor = MCDI_WORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_VENDOR_ID); dev_params->device = MCDI_WORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_DEVICE_ID); + dev_params->subsys_vendor = MCDI_WORD(outbuf, + CDX_BUS_GET_DEVICE_CONFIG_OUT_SUBSYS_VENDOR_ID); + dev_params->subsys_device = MCDI_WORD(outbuf, + CDX_BUS_GET_DEVICE_CONFIG_OUT_SUBSYS_DEVICE_ID); + dev_params->class = MCDI_DWORD(outbuf, + CDX_BUS_GET_DEVICE_CONFIG_OUT_DEVICE_CLASS) & 0xFFFFFF; + dev_params->revision = MCDI_BYTE(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_DEVICE_REVISION); return 0; } +int cdx_mcdi_bus_enable(struct cdx_mcdi *cdx, u8 bus_num) +{ + MCDI_DECLARE_BUF(inbuf, MC_CMD_CDX_BUS_UP_IN_LEN); + int ret; + + MCDI_SET_DWORD(inbuf, CDX_BUS_UP_IN_BUS, bus_num); + ret = cdx_mcdi_rpc(cdx, MC_CMD_CDX_BUS_UP, inbuf, sizeof(inbuf), + NULL, 0, NULL); + + return ret; +} + +int cdx_mcdi_bus_disable(struct cdx_mcdi *cdx, u8 bus_num) +{ + MCDI_DECLARE_BUF(inbuf, MC_CMD_CDX_BUS_DOWN_IN_LEN); + int ret; + + MCDI_SET_DWORD(inbuf, CDX_BUS_DOWN_IN_BUS, bus_num); + ret = cdx_mcdi_rpc(cdx, MC_CMD_CDX_BUS_DOWN, inbuf, sizeof(inbuf), + NULL, 0, NULL); + + return ret; +} + int cdx_mcdi_reset_device(struct cdx_mcdi *cdx, u8 bus_num, u8 dev_num) { MCDI_DECLARE_BUF(inbuf, MC_CMD_CDX_DEVICE_RESET_IN_LEN); diff --git a/drivers/cdx/controller/mcdi_functions.h b/drivers/cdx/controller/mcdi_functions.h index a448d6581eb4..258a5462fbe3 100644 --- a/drivers/cdx/controller/mcdi_functions.h +++ b/drivers/cdx/controller/mcdi_functions.h @@ -48,6 +48,24 @@ int cdx_mcdi_get_dev_config(struct cdx_mcdi *cdx, struct cdx_dev_params *dev_params); /** + * cdx_mcdi_bus_enable - Enable CDX bus represented by bus_num + * @cdx: pointer to MCDI interface. + * @bus_num: Bus number. + * + * Return: 0 on success, <0 on failure + */ +int cdx_mcdi_bus_enable(struct cdx_mcdi *cdx, u8 bus_num); + +/** + * cdx_mcdi_bus_disable - Disable CDX bus represented by bus_num + * @cdx: pointer to MCDI interface. + * @bus_num: Bus number. + * + * Return: 0 on success, <0 on failure + */ +int cdx_mcdi_bus_disable(struct cdx_mcdi *cdx, u8 bus_num); + +/** * cdx_mcdi_reset_device - Reset cdx device represented by bus_num:dev_num * @cdx: pointer to MCDI interface. * @bus_num: Bus number. diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c index e1deb7a69b8a..9c90b1d2c036 100644 --- a/drivers/char/hpet.c +++ b/drivers/char/hpet.c @@ -92,7 +92,7 @@ struct hpets { unsigned long hp_delta; unsigned int hp_ntimer; unsigned int hp_which; - struct hpet_dev hp_dev[]; + struct hpet_dev hp_dev[] __counted_by(hp_ntimer); }; static struct hpets *hpets; diff --git a/drivers/char/mem.c b/drivers/char/mem.c index 8d27aa6b5b50..3c6670cf905f 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -628,6 +628,7 @@ static int open_port(struct inode *inode, struct file *filp) #define full_lseek null_lseek #define write_zero write_null #define write_iter_zero write_iter_null +#define splice_write_zero splice_write_null #define open_mem open_port static const struct file_operations __maybe_unused mem_fops = { @@ -665,6 +666,8 @@ static const struct file_operations zero_fops = { .read_iter = read_iter_zero, .read = read_zero, .write_iter = write_iter_zero, + .splice_read = copy_splice_read, + .splice_write = splice_write_zero, .mmap = mmap_zero, .get_unmapped_area = get_unmapped_area_zero, #ifndef CONFIG_MMU @@ -676,6 +679,7 @@ static const struct file_operations full_fops = { .llseek = full_lseek, .read_iter = read_iter_zero, .write = write_full, + .splice_read = copy_splice_read, }; static const struct memdev { diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c index f60bb6151402..019cf6079cec 100644 --- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c +++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c @@ -84,18 +84,13 @@ #include <linux/sysctl.h> #include <linux/fs.h> #include <linux/cdev.h> +#include <linux/of.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/slab.h> #include <linux/io.h> #include <linux/uaccess.h> -#ifdef CONFIG_OF -/* For open firmware. */ -#include <linux/of_address.h> -#include <linux/of_device.h> -#include <linux/of_platform.h> -#endif - #include "xilinx_hwicap.h" #include "buffer_icap.h" #include "fifo_icap.h" @@ -601,14 +596,14 @@ static const struct file_operations hwicap_fops = { .llseek = noop_llseek, }; -static int hwicap_setup(struct device *dev, int id, - const struct resource *regs_res, +static int hwicap_setup(struct platform_device *pdev, int id, const struct hwicap_driver_config *config, const struct config_registers *config_regs) { dev_t devt; struct hwicap_drvdata *drvdata = NULL; - int retval = 0; + struct device *dev = &pdev->dev; + int retval; dev_info(dev, "Xilinx icap port driver\n"); @@ -636,72 +631,39 @@ static int hwicap_setup(struct device *dev, int id, devt = MKDEV(XHWICAP_MAJOR, XHWICAP_MINOR + id); - drvdata = kzalloc(sizeof(struct hwicap_drvdata), GFP_KERNEL); + drvdata = devm_kzalloc(dev, sizeof(struct hwicap_drvdata), GFP_KERNEL); if (!drvdata) { retval = -ENOMEM; - goto failed0; + goto failed; } dev_set_drvdata(dev, (void *)drvdata); - if (!regs_res) { - dev_err(dev, "Couldn't get registers resource\n"); - retval = -EFAULT; - goto failed1; - } - - drvdata->mem_start = regs_res->start; - drvdata->mem_end = regs_res->end; - drvdata->mem_size = resource_size(regs_res); - - if (!request_mem_region(drvdata->mem_start, - drvdata->mem_size, DRIVER_NAME)) { - dev_err(dev, "Couldn't lock memory region at %Lx\n", - (unsigned long long) regs_res->start); - retval = -EBUSY; - goto failed1; + drvdata->base_address = devm_platform_ioremap_resource(pdev, 0); + if (!drvdata->base_address) { + retval = -ENODEV; + goto failed; } drvdata->devt = devt; drvdata->dev = dev; - drvdata->base_address = ioremap(drvdata->mem_start, drvdata->mem_size); - if (!drvdata->base_address) { - dev_err(dev, "ioremap() failed\n"); - retval = -ENOMEM; - goto failed2; - } - drvdata->config = config; drvdata->config_regs = config_regs; mutex_init(&drvdata->sem); drvdata->is_open = 0; - dev_info(dev, "ioremap %llx to %p with size %llx\n", - (unsigned long long) drvdata->mem_start, - drvdata->base_address, - (unsigned long long) drvdata->mem_size); - cdev_init(&drvdata->cdev, &hwicap_fops); drvdata->cdev.owner = THIS_MODULE; retval = cdev_add(&drvdata->cdev, devt, 1); if (retval) { dev_err(dev, "cdev_add() failed\n"); - goto failed3; + goto failed; } device_create(&icap_class, dev, devt, NULL, "%s%d", DRIVER_NAME, id); return 0; /* success */ - failed3: - iounmap(drvdata->base_address); - - failed2: - release_mem_region(regs_res->start, drvdata->mem_size); - - failed1: - kfree(drvdata); - - failed0: + failed: mutex_lock(&icap_sem); probed_devices[id] = 0; mutex_unlock(&icap_sem); @@ -723,75 +685,22 @@ static struct hwicap_driver_config fifo_icap_config = { .reset = fifo_icap_reset, }; -#ifdef CONFIG_OF -static int hwicap_of_probe(struct platform_device *op, - const struct hwicap_driver_config *config) -{ - struct resource res; - const unsigned int *id; - const char *family; - int rc; - const struct config_registers *regs; - - - rc = of_address_to_resource(op->dev.of_node, 0, &res); - if (rc) { - dev_err(&op->dev, "invalid address\n"); - return rc; - } - - id = of_get_property(op->dev.of_node, "port-number", NULL); - - /* It's most likely that we're using V4, if the family is not - * specified - */ - regs = &v4_config_registers; - family = of_get_property(op->dev.of_node, "xlnx,family", NULL); - - if (family) { - if (!strcmp(family, "virtex2p")) - regs = &v2_config_registers; - else if (!strcmp(family, "virtex4")) - regs = &v4_config_registers; - else if (!strcmp(family, "virtex5")) - regs = &v5_config_registers; - else if (!strcmp(family, "virtex6")) - regs = &v6_config_registers; - } - return hwicap_setup(&op->dev, id ? *id : -1, &res, config, - regs); -} -#else -static inline int hwicap_of_probe(struct platform_device *op, - const struct hwicap_driver_config *config) -{ - return -EINVAL; -} -#endif /* CONFIG_OF */ - -static const struct of_device_id hwicap_of_match[]; static int hwicap_drv_probe(struct platform_device *pdev) { - const struct of_device_id *match; - struct resource *res; const struct config_registers *regs; + const struct hwicap_driver_config *config; const char *family; + int id = -1; - match = of_match_device(hwicap_of_match, &pdev->dev); - if (match) - return hwicap_of_probe(pdev, match->data); + config = device_get_match_data(&pdev->dev); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENODEV; + of_property_read_u32(pdev->dev.of_node, "port-number", &id); /* It's most likely that we're using V4, if the family is not * specified */ regs = &v4_config_registers; - family = pdev->dev.platform_data; - - if (family) { + if (!of_property_read_string(pdev->dev.of_node, "xlnx,family", &family)) { if (!strcmp(family, "virtex2p")) regs = &v2_config_registers; else if (!strcmp(family, "virtex4")) @@ -801,9 +710,7 @@ static int hwicap_drv_probe(struct platform_device *pdev) else if (!strcmp(family, "virtex6")) regs = &v6_config_registers; } - - return hwicap_setup(&pdev->dev, pdev->id, res, - &buffer_icap_config, regs); + return hwicap_setup(pdev, id, config, regs); } static void hwicap_drv_remove(struct platform_device *pdev) @@ -815,16 +722,12 @@ static void hwicap_drv_remove(struct platform_device *pdev) device_destroy(&icap_class, drvdata->devt); cdev_del(&drvdata->cdev); - iounmap(drvdata->base_address); - release_mem_region(drvdata->mem_start, drvdata->mem_size); - kfree(drvdata); mutex_lock(&icap_sem); probed_devices[MINOR(dev->devt)-XHWICAP_MINOR] = 0; mutex_unlock(&icap_sem); } -#ifdef CONFIG_OF /* Match table for device tree binding */ static const struct of_device_id hwicap_of_match[] = { { .compatible = "xlnx,opb-hwicap-1.00.b", .data = &buffer_icap_config}, @@ -832,9 +735,6 @@ static const struct of_device_id hwicap_of_match[] = { {}, }; MODULE_DEVICE_TABLE(of, hwicap_of_match); -#else -#define hwicap_of_match NULL -#endif static struct platform_driver hwicap_platform_driver = { .probe = hwicap_drv_probe, diff --git a/drivers/comedi/Kconfig b/drivers/comedi/Kconfig index 9af280735cba..93c68a40a17b 100644 --- a/drivers/comedi/Kconfig +++ b/drivers/comedi/Kconfig @@ -67,6 +67,7 @@ config COMEDI_TEST config COMEDI_PARPORT tristate "Parallel port support" + depends on HAS_IOPORT help Enable support for the standard parallel port. A cheap and easy way to get a few more digital I/O lines. Steal @@ -79,6 +80,7 @@ config COMEDI_PARPORT config COMEDI_SSV_DNP tristate "SSV Embedded Systems DIL/Net-PC support" depends on X86_32 || COMPILE_TEST + depends on HAS_IOPORT help Enable support for SSV Embedded Systems DIL/Net-PC @@ -89,6 +91,8 @@ endif # COMEDI_MISC_DRIVERS menuconfig COMEDI_ISA_DRIVERS bool "Comedi ISA and PC/104 drivers" + depends on ISA || ISA_BUS || PC104 + depends on HAS_IOPORT help Enable comedi ISA and PC/104 drivers to be built @@ -589,6 +593,7 @@ config COMEDI_8255_PCI config COMEDI_ADDI_WATCHDOG tristate + depends on HAS_IOPORT help Provides support for the watchdog subdevice found on many ADDI-DATA boards. This module will be automatically selected when needed. The @@ -596,6 +601,7 @@ config COMEDI_ADDI_WATCHDOG config COMEDI_ADDI_APCI_1032 tristate "ADDI-DATA APCI_1032 support" + depends on HAS_IOPORT help Enable support for ADDI-DATA APCI_1032 cards @@ -604,6 +610,7 @@ config COMEDI_ADDI_APCI_1032 config COMEDI_ADDI_APCI_1500 tristate "ADDI-DATA APCI_1500 support" + depends on HAS_IOPORT help Enable support for ADDI-DATA APCI_1500 cards @@ -612,6 +619,7 @@ config COMEDI_ADDI_APCI_1500 config COMEDI_ADDI_APCI_1516 tristate "ADDI-DATA APCI-1016/1516/2016 support" + depends on HAS_IOPORT select COMEDI_ADDI_WATCHDOG help Enable support for ADDI-DATA APCI-1016, APCI-1516 and APCI-2016 boards. @@ -623,6 +631,7 @@ config COMEDI_ADDI_APCI_1516 config COMEDI_ADDI_APCI_1564 tristate "ADDI-DATA APCI_1564 support" + depends on HAS_IOPORT select COMEDI_ADDI_WATCHDOG help Enable support for ADDI-DATA APCI_1564 cards @@ -632,6 +641,7 @@ config COMEDI_ADDI_APCI_1564 config COMEDI_ADDI_APCI_16XX tristate "ADDI-DATA APCI_16xx support" + depends on HAS_IOPORT help Enable support for ADDI-DATA APCI_16xx cards @@ -640,6 +650,7 @@ config COMEDI_ADDI_APCI_16XX config COMEDI_ADDI_APCI_2032 tristate "ADDI-DATA APCI_2032 support" + depends on HAS_IOPORT select COMEDI_ADDI_WATCHDOG help Enable support for ADDI-DATA APCI_2032 cards @@ -649,6 +660,7 @@ config COMEDI_ADDI_APCI_2032 config COMEDI_ADDI_APCI_2200 tristate "ADDI-DATA APCI_2200 support" + depends on HAS_IOPORT select COMEDI_ADDI_WATCHDOG help Enable support for ADDI-DATA APCI_2200 cards @@ -658,6 +670,7 @@ config COMEDI_ADDI_APCI_2200 config COMEDI_ADDI_APCI_3120 tristate "ADDI-DATA APCI_3120/3001 support" + depends on HAS_IOPORT depends on HAS_DMA help Enable support for ADDI-DATA APCI_3120/3001 cards @@ -667,6 +680,7 @@ config COMEDI_ADDI_APCI_3120 config COMEDI_ADDI_APCI_3501 tristate "ADDI-DATA APCI_3501 support" + depends on HAS_IOPORT help Enable support for ADDI-DATA APCI_3501 cards @@ -675,6 +689,7 @@ config COMEDI_ADDI_APCI_3501 config COMEDI_ADDI_APCI_3XXX tristate "ADDI-DATA APCI_3xxx support" + depends on HAS_IOPORT help Enable support for ADDI-DATA APCI_3xxx cards @@ -683,6 +698,7 @@ config COMEDI_ADDI_APCI_3XXX config COMEDI_ADL_PCI6208 tristate "ADLink PCI-6208A support" + depends on HAS_IOPORT help Enable support for ADLink PCI-6208A cards @@ -691,6 +707,7 @@ config COMEDI_ADL_PCI6208 config COMEDI_ADL_PCI7X3X tristate "ADLink PCI-723X/743X isolated digital i/o board support" + depends on HAS_IOPORT help Enable support for ADlink PCI-723X/743X isolated digital i/o boards. Supported boards include the 32-channel PCI-7230 (16 in/16 out), @@ -702,6 +719,7 @@ config COMEDI_ADL_PCI7X3X config COMEDI_ADL_PCI8164 tristate "ADLink PCI-8164 4 Axes Motion Control board support" + depends on HAS_IOPORT help Enable support for ADlink PCI-8164 4 Axes Motion Control board @@ -710,6 +728,7 @@ config COMEDI_ADL_PCI8164 config COMEDI_ADL_PCI9111 tristate "ADLink PCI-9111HR support" + depends on HAS_IOPORT select COMEDI_8254 help Enable support for ADlink PCI9111 cards @@ -719,6 +738,7 @@ config COMEDI_ADL_PCI9111 config COMEDI_ADL_PCI9118 tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support" + depends on HAS_IOPORT depends on HAS_DMA select COMEDI_8254 help @@ -729,6 +749,7 @@ config COMEDI_ADL_PCI9118 config COMEDI_ADV_PCI1710 tristate "Advantech PCI-171x and PCI-1731 support" + depends on HAS_IOPORT select COMEDI_8254 help Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711, @@ -739,6 +760,7 @@ config COMEDI_ADV_PCI1710 config COMEDI_ADV_PCI1720 tristate "Advantech PCI-1720 support" + depends on HAS_IOPORT help Enable support for Advantech PCI-1720 Analog Output board. @@ -747,6 +769,7 @@ config COMEDI_ADV_PCI1720 config COMEDI_ADV_PCI1723 tristate "Advantech PCI-1723 support" + depends on HAS_IOPORT help Enable support for Advantech PCI-1723 cards @@ -755,6 +778,7 @@ config COMEDI_ADV_PCI1723 config COMEDI_ADV_PCI1724 tristate "Advantech PCI-1724U support" + depends on HAS_IOPORT help Enable support for Advantech PCI-1724U cards. These are 32-channel analog output cards with voltage and current loop output ranges and @@ -765,6 +789,7 @@ config COMEDI_ADV_PCI1724 config COMEDI_ADV_PCI1760 tristate "Advantech PCI-1760 support" + depends on HAS_IOPORT help Enable support for Advantech PCI-1760 board. @@ -773,6 +798,7 @@ config COMEDI_ADV_PCI1760 config COMEDI_ADV_PCI_DIO tristate "Advantech PCI DIO card support" + depends on HAS_IOPORT select COMEDI_8254 select COMEDI_8255 help @@ -796,6 +822,7 @@ config COMEDI_AMPLC_DIO200_PCI config COMEDI_AMPLC_PC236_PCI tristate "Amplicon PCI236 DIO board support" + depends on HAS_IOPORT select COMEDI_AMPLC_PC236 help Enable support for Amplicon PCI236 DIO board. @@ -805,6 +832,7 @@ config COMEDI_AMPLC_PC236_PCI config COMEDI_AMPLC_PC263_PCI tristate "Amplicon PCI263 relay board support" + depends on HAS_IOPORT help Enable support for Amplicon PCI263 relay board. This is a PCI board with 16 reed relay output channels. @@ -814,6 +842,7 @@ config COMEDI_AMPLC_PC263_PCI config COMEDI_AMPLC_PCI224 tristate "Amplicon PCI224 and PCI234 support" + depends on HAS_IOPORT select COMEDI_8254 help Enable support for Amplicon PCI224 and PCI234 AO boards @@ -823,6 +852,7 @@ config COMEDI_AMPLC_PCI224 config COMEDI_AMPLC_PCI230 tristate "Amplicon PCI230 and PCI260 support" + depends on HAS_IOPORT select COMEDI_8254 select COMEDI_8255 help @@ -834,6 +864,7 @@ config COMEDI_AMPLC_PCI230 config COMEDI_CONTEC_PCI_DIO tristate "Contec PIO1616L digital I/O board support" + depends on HAS_IOPORT help Enable support for the Contec PIO1616L digital I/O board @@ -842,6 +873,7 @@ config COMEDI_CONTEC_PCI_DIO config COMEDI_DAS08_PCI tristate "DAS-08 PCI support" + depends on HAS_IOPORT select COMEDI_DAS08 help Enable support for PCI DAS-08 cards. @@ -861,6 +893,7 @@ config COMEDI_DT3000 config COMEDI_DYNA_PCI10XX tristate "Dynalog PCI DAQ series support" + depends on HAS_IOPORT help Enable support for Dynalog PCI DAQ series PCI-1050 @@ -911,6 +944,7 @@ config COMEDI_JR3_PCI config COMEDI_KE_COUNTER tristate "Kolter-Electronic PCI Counter 1 card support" + depends on HAS_IOPORT help Enable support for Kolter-Electronic PCI Counter 1 cards @@ -929,6 +963,7 @@ config COMEDI_CB_PCIDAS64 config COMEDI_CB_PCIDAS tristate "MeasurementComputing PCI-DAS support" + depends on HAS_IOPORT select COMEDI_8254 select COMEDI_8255 help @@ -942,6 +977,7 @@ config COMEDI_CB_PCIDAS config COMEDI_CB_PCIDDA tristate "MeasurementComputing PCI-DDA series support" + depends on HAS_IOPORT select COMEDI_8255 help Enable support for ComputerBoards/MeasurementComputing PCI-DDA @@ -953,6 +989,7 @@ config COMEDI_CB_PCIDDA config COMEDI_CB_PCIMDAS tristate "MeasurementComputing PCIM-DAS1602/16, PCIe-DAS1602/16 support" + depends on HAS_IOPORT select COMEDI_8254 select COMEDI_8255 help @@ -964,6 +1001,7 @@ config COMEDI_CB_PCIMDAS config COMEDI_CB_PCIMDDA tristate "MeasurementComputing PCIM-DDA06-16 support" + depends on HAS_IOPORT select COMEDI_8255 help Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16 @@ -973,6 +1011,7 @@ config COMEDI_CB_PCIMDDA config COMEDI_ME4000 tristate "Meilhaus ME-4000 support" + depends on HAS_IOPORT select COMEDI_8254 help Enable support for Meilhaus PCI data acquisition cards @@ -1042,7 +1081,6 @@ config COMEDI_NI_PCIDIO tristate "NI PCI-DIO32HS, PCI-6533, PCI-6534 support" depends on HAS_DMA select COMEDI_MITE - select COMEDI_8255 help Enable support for National Instruments PCI-DIO-32HS, PXI-6533, PCI-6533 and PCI-6534 @@ -1103,7 +1141,7 @@ endif # COMEDI_PCI_DRIVERS menuconfig COMEDI_PCMCIA_DRIVERS tristate "Comedi PCMCIA drivers" - depends on PCMCIA + depends on PCMCIA && HAS_IOPORT help Enable support for comedi PCMCIA drivers. @@ -1254,6 +1292,7 @@ config COMEDI_8255 config COMEDI_8255_SA tristate "Standalone 8255 support" + depends on HAS_IOPORT select COMEDI_8255 help Enable support for 8255 digital I/O as a standalone driver. @@ -1290,10 +1329,12 @@ config COMEDI_AMPLC_DIO200 config COMEDI_AMPLC_PC236 tristate + depends on HAS_IOPORT select COMEDI_8255 config COMEDI_DAS08 tristate + depends on HAS_IOPORT select COMEDI_8254 select COMEDI_8255 diff --git a/drivers/comedi/drivers.c b/drivers/comedi/drivers.c index d4e2ed709bfc..376130bfba8a 100644 --- a/drivers/comedi/drivers.c +++ b/drivers/comedi/drivers.c @@ -177,7 +177,8 @@ static void comedi_device_detach_cleanup(struct comedi_device *dev) dev->n_subdevices = 0; } kfree(dev->private); - kfree(dev->pacer); + if (!IS_ERR(dev->pacer)) + kfree(dev->pacer); dev->private = NULL; dev->pacer = NULL; dev->driver = NULL; diff --git a/drivers/comedi/drivers/8255.c b/drivers/comedi/drivers/8255.c index ced8ea09d4fa..f45f7bd1c61a 100644 --- a/drivers/comedi/drivers/8255.c +++ b/drivers/comedi/drivers/8255.c @@ -80,7 +80,7 @@ static int dev_8255_attach(struct comedi_device *dev, if (ret) { s->type = COMEDI_SUBD_UNUSED; } else { - ret = subdev_8255_init(dev, s, NULL, iobase); + ret = subdev_8255_io_init(dev, s, iobase); if (ret) { /* * Release the I/O port region here, as the diff --git a/drivers/comedi/drivers/8255_pci.c b/drivers/comedi/drivers/8255_pci.c index 0fec048e3a53..8498cabe4d91 100644 --- a/drivers/comedi/drivers/8255_pci.c +++ b/drivers/comedi/drivers/8255_pci.c @@ -57,6 +57,7 @@ #include <linux/comedi/comedi_8255.h> enum pci_8255_boardid { +#ifdef CONFIG_HAS_IOPORT BOARD_ADLINK_PCI7224, BOARD_ADLINK_PCI7248, BOARD_ADLINK_PCI7296, @@ -65,6 +66,7 @@ enum pci_8255_boardid { BOARD_CB_PCIDIO48H_OLD, BOARD_CB_PCIDIO48H_NEW, BOARD_CB_PCIDIO96H, +#endif /* CONFIG_HAS_IOPORT */ BOARD_NI_PCIDIO96, BOARD_NI_PCIDIO96B, BOARD_NI_PXI6508, @@ -82,6 +84,7 @@ struct pci_8255_boardinfo { }; static const struct pci_8255_boardinfo pci_8255_boards[] = { +#ifdef CONFIG_HAS_IOPORT [BOARD_ADLINK_PCI7224] = { .name = "adl_pci-7224", .dio_badr = 2, @@ -122,6 +125,7 @@ static const struct pci_8255_boardinfo pci_8255_boards[] = { .dio_badr = 2, .n_8255 = 4, }, +#endif /* CONFIG_HAS_IOPORT */ [BOARD_NI_PCIDIO96] = { .name = "ni_pci-dio-96", .dio_badr = 1, @@ -219,8 +223,11 @@ static int pci_8255_auto_attach(struct comedi_device *dev, dev->mmio = pci_ioremap_bar(pcidev, board->dio_badr); if (!dev->mmio) return -ENOMEM; - } else { + } else if (IS_ENABLED(CONFIG_HAS_IOPORT)) { dev->iobase = pci_resource_start(pcidev, board->dio_badr); + } else { + dev_err(dev->class_dev, "error! need I/O port support\n"); + return -ENXIO; } /* @@ -235,9 +242,9 @@ static int pci_8255_auto_attach(struct comedi_device *dev, for (i = 0; i < board->n_8255; i++) { s = &dev->subdevices[i]; if (dev->mmio) - ret = subdev_8255_mm_init(dev, s, NULL, i * I8255_SIZE); + ret = subdev_8255_mm_init(dev, s, i * I8255_SIZE); else - ret = subdev_8255_init(dev, s, NULL, i * I8255_SIZE); + ret = subdev_8255_io_init(dev, s, i * I8255_SIZE); if (ret) return ret; } @@ -259,6 +266,7 @@ static int pci_8255_pci_probe(struct pci_dev *dev, } static const struct pci_device_id pci_8255_pci_table[] = { +#ifdef CONFIG_HAS_IOPORT { PCI_VDEVICE(ADLINK, 0x7224), BOARD_ADLINK_PCI7224 }, { PCI_VDEVICE(ADLINK, 0x7248), BOARD_ADLINK_PCI7248 }, { PCI_VDEVICE(ADLINK, 0x7296), BOARD_ADLINK_PCI7296 }, @@ -269,6 +277,7 @@ static const struct pci_device_id pci_8255_pci_table[] = { { PCI_DEVICE_SUB(PCI_VENDOR_ID_CB, 0x000b, PCI_VENDOR_ID_CB, 0x000b), .driver_data = BOARD_CB_PCIDIO48H_NEW }, { PCI_VDEVICE(CB, 0x0017), BOARD_CB_PCIDIO96H }, +#endif /* CONFIG_HAS_IOPORT */ { PCI_VDEVICE(NI, 0x0160), BOARD_NI_PCIDIO96 }, { PCI_VDEVICE(NI, 0x1630), BOARD_NI_PCIDIO96B }, { PCI_VDEVICE(NI, 0x13c0), BOARD_NI_PXI6508 }, diff --git a/drivers/comedi/drivers/adl_pci9111.c b/drivers/comedi/drivers/adl_pci9111.c index c50f94272a74..086d93f40cb9 100644 --- a/drivers/comedi/drivers/adl_pci9111.c +++ b/drivers/comedi/drivers/adl_pci9111.c @@ -647,10 +647,10 @@ static int pci9111_auto_attach(struct comedi_device *dev, dev->irq = pcidev->irq; } - dev->pacer = comedi_8254_init(dev->iobase + PCI9111_8254_BASE_REG, - I8254_OSC_BASE_2MHZ, I8254_IO16, 0); - if (!dev->pacer) - return -ENOMEM; + dev->pacer = comedi_8254_io_alloc(dev->iobase + PCI9111_8254_BASE_REG, + I8254_OSC_BASE_2MHZ, I8254_IO16, 0); + if (IS_ERR(dev->pacer)) + return PTR_ERR(dev->pacer); ret = comedi_alloc_subdevices(dev, 4); if (ret) diff --git a/drivers/comedi/drivers/adl_pci9118.c b/drivers/comedi/drivers/adl_pci9118.c index 9a816c718303..a76e2666d583 100644 --- a/drivers/comedi/drivers/adl_pci9118.c +++ b/drivers/comedi/drivers/adl_pci9118.c @@ -1524,10 +1524,10 @@ static int pci9118_common_attach(struct comedi_device *dev, devpriv->iobase_a = pci_resource_start(pcidev, 0); dev->iobase = pci_resource_start(pcidev, 2); - dev->pacer = comedi_8254_init(dev->iobase + PCI9118_TIMER_BASE, - I8254_OSC_BASE_4MHZ, I8254_IO32, 0); - if (!dev->pacer) - return -ENOMEM; + dev->pacer = comedi_8254_io_alloc(dev->iobase + PCI9118_TIMER_BASE, + I8254_OSC_BASE_4MHZ, I8254_IO32, 0); + if (IS_ERR(dev->pacer)) + return PTR_ERR(dev->pacer); pci9118_reset(dev); diff --git a/drivers/comedi/drivers/adv_pci1710.c b/drivers/comedi/drivers/adv_pci1710.c index 4f2639968260..c49b0f1f5228 100644 --- a/drivers/comedi/drivers/adv_pci1710.c +++ b/drivers/comedi/drivers/adv_pci1710.c @@ -767,10 +767,10 @@ static int pci1710_auto_attach(struct comedi_device *dev, return ret; dev->iobase = pci_resource_start(pcidev, 2); - dev->pacer = comedi_8254_init(dev->iobase + PCI171X_TIMER_BASE, - I8254_OSC_BASE_10MHZ, I8254_IO16, 0); - if (!dev->pacer) - return -ENOMEM; + dev->pacer = comedi_8254_io_alloc(dev->iobase + PCI171X_TIMER_BASE, + I8254_OSC_BASE_10MHZ, I8254_IO16, 0); + if (IS_ERR(dev->pacer)) + return PTR_ERR(dev->pacer); n_subdevices = 1; /* all boards have analog inputs */ if (board->has_ao) diff --git a/drivers/comedi/drivers/adv_pci_dio.c b/drivers/comedi/drivers/adv_pci_dio.c index efa3e46b554b..ca8054504760 100644 --- a/drivers/comedi/drivers/adv_pci_dio.c +++ b/drivers/comedi/drivers/adv_pci_dio.c @@ -642,8 +642,8 @@ static int pci_dio_auto_attach(struct comedi_device *dev, for (j = 0; j < d->chans; j++) { s = &dev->subdevices[subdev++]; - ret = subdev_8255_init(dev, s, NULL, - d->addr + j * I8255_SIZE); + ret = subdev_8255_io_init(dev, s, + d->addr + j * I8255_SIZE); if (ret) return ret; } @@ -664,11 +664,11 @@ static int pci_dio_auto_attach(struct comedi_device *dev, if (board->timer_regbase) { s = &dev->subdevices[subdev++]; - dev->pacer = comedi_8254_init(dev->iobase + - board->timer_regbase, - 0, I8254_IO8, 0); - if (!dev->pacer) - return -ENOMEM; + dev->pacer = + comedi_8254_io_alloc(dev->iobase + board->timer_regbase, + 0, I8254_IO8, 0); + if (IS_ERR(dev->pacer)) + return PTR_ERR(dev->pacer); comedi_8254_subdevice_init(s, dev->pacer); } diff --git a/drivers/comedi/drivers/aio_aio12_8.c b/drivers/comedi/drivers/aio_aio12_8.c index 30b8a32204d8..227a86a3a760 100644 --- a/drivers/comedi/drivers/aio_aio12_8.c +++ b/drivers/comedi/drivers/aio_aio12_8.c @@ -206,10 +206,10 @@ static int aio_aio12_8_attach(struct comedi_device *dev, if (ret) return ret; - dev->pacer = comedi_8254_init(dev->iobase + AIO12_8_8254_BASE_REG, - 0, I8254_IO8, 0); - if (!dev->pacer) - return -ENOMEM; + dev->pacer = comedi_8254_io_alloc(dev->iobase + AIO12_8_8254_BASE_REG, + 0, I8254_IO8, 0); + if (IS_ERR(dev->pacer)) + return PTR_ERR(dev->pacer); ret = comedi_alloc_subdevices(dev, 4); if (ret) @@ -247,7 +247,7 @@ static int aio_aio12_8_attach(struct comedi_device *dev, /* Digital I/O subdevice (8255) */ s = &dev->subdevices[2]; - ret = subdev_8255_init(dev, s, NULL, AIO12_8_8255_BASE_REG); + ret = subdev_8255_io_init(dev, s, AIO12_8_8255_BASE_REG); if (ret) return ret; diff --git a/drivers/comedi/drivers/amplc_dio200_common.c b/drivers/comedi/drivers/amplc_dio200_common.c index ff651f2eb86c..b1a9b4c4a185 100644 --- a/drivers/comedi/drivers/amplc_dio200_common.c +++ b/drivers/comedi/drivers/amplc_dio200_common.c @@ -86,6 +86,70 @@ struct dio200_subdev_intr { unsigned int active:1; }; +#ifdef CONFIG_HAS_IOPORT + +static unsigned char dio200___read8(struct comedi_device *dev, + unsigned int offset) +{ + if (dev->mmio) + return readb(dev->mmio + offset); + return inb(dev->iobase + offset); +} + +static void dio200___write8(struct comedi_device *dev, + unsigned int offset, unsigned char val) +{ + if (dev->mmio) + writeb(val, dev->mmio + offset); + else + outb(val, dev->iobase + offset); +} + +static unsigned int dio200___read32(struct comedi_device *dev, + unsigned int offset) +{ + if (dev->mmio) + return readl(dev->mmio + offset); + return inl(dev->iobase + offset); +} + +static void dio200___write32(struct comedi_device *dev, + unsigned int offset, unsigned int val) +{ + if (dev->mmio) + writel(val, dev->mmio + offset); + else + outl(val, dev->iobase + offset); +} + +#else /* CONFIG_HAS_IOPORT */ + +static unsigned char dio200___read8(struct comedi_device *dev, + unsigned int offset) +{ + return readb(dev->mmio + offset); +} + +static void dio200___write8(struct comedi_device *dev, + unsigned int offset, unsigned char val) +{ + writeb(val, dev->mmio + offset); +} + +static unsigned int dio200___read32(struct comedi_device *dev, + unsigned int offset) +{ + return readl(dev->mmio + offset); +} + +static void dio200___write32(struct comedi_device *dev, + unsigned int offset, unsigned int val) +{ + writel(val, dev->mmio + offset); +} + +#endif /* CONFIG_HAS_IOPORT */ + static unsigned char dio200_read8(struct comedi_device *dev, unsigned int offset) { @@ -94,9 +158,7 @@ static unsigned char dio200_read8(struct comedi_device *dev, if (board->is_pcie) offset <<= 3; - if (dev->mmio) - return readb(dev->mmio + offset); - return inb(dev->iobase + offset); + return dio200___read8(dev, offset); } static void dio200_write8(struct comedi_device *dev, @@ -107,10 +169,7 @@ static void dio200_write8(struct comedi_device *dev, if (board->is_pcie) offset <<= 3; - if (dev->mmio) - writeb(val, dev->mmio + offset); - else - outb(val, dev->iobase + offset); + dio200___write8(dev, offset, val); } static unsigned int dio200_read32(struct comedi_device *dev, @@ -121,9 +180,7 @@ static unsigned int dio200_read32(struct comedi_device *dev, if (board->is_pcie) offset <<= 3; - if (dev->mmio) - return readl(dev->mmio + offset); - return inl(dev->iobase + offset); + return dio200___read32(dev, offset); } static void dio200_write32(struct comedi_device *dev, @@ -134,10 +191,7 @@ static void dio200_write32(struct comedi_device *dev, if (board->is_pcie) offset <<= 3; - if (dev->mmio) - writel(val, dev->mmio + offset); - else - outl(val, dev->iobase + offset); + dio200___write32(dev, offset, val); } static unsigned int dio200_subdev_8254_offset(struct comedi_device *dev, @@ -149,9 +203,9 @@ static unsigned int dio200_subdev_8254_offset(struct comedi_device *dev, /* get the offset that was passed to comedi_8254_*_init() */ if (dev->mmio) - offset = i8254->mmio - dev->mmio; + offset = (void __iomem *)i8254->context - dev->mmio; else - offset = i8254->iobase - dev->iobase; + offset = i8254->context - dev->iobase; /* remove the shift that was added for PCIe boards */ if (board->is_pcie) @@ -556,14 +610,14 @@ static int dio200_subdev_8254_init(struct comedi_device *dev, } if (dev->mmio) { - i8254 = comedi_8254_mm_init(dev->mmio + offset, - 0, I8254_IO8, regshift); + i8254 = comedi_8254_mm_alloc(dev->mmio + offset, + 0, I8254_IO8, regshift); } else { - i8254 = comedi_8254_init(dev->iobase + offset, - 0, I8254_IO8, regshift); + i8254 = comedi_8254_io_alloc(dev->iobase + offset, + 0, I8254_IO8, regshift); } - if (!i8254) - return -ENOMEM; + if (IS_ERR(i8254)) + return PTR_ERR(i8254); comedi_8254_subdevice_init(s, i8254); @@ -779,6 +833,12 @@ int amplc_dio200_common_attach(struct comedi_device *dev, unsigned int irq, unsigned int n; int ret; + if (!IS_ENABLED(CONFIG_HAS_IOPORT) && !dev->mmio) { + dev_err(dev->class_dev, + "error! need I/O port support\n"); + return -ENXIO; + } + ret = comedi_alloc_subdevices(dev, board->n_subdevs); if (ret) return ret; diff --git a/drivers/comedi/drivers/amplc_dio200_pci.c b/drivers/comedi/drivers/amplc_dio200_pci.c index 527994d82a1f..cb5b328a28e3 100644 --- a/drivers/comedi/drivers/amplc_dio200_pci.c +++ b/drivers/comedi/drivers/amplc_dio200_pci.c @@ -223,14 +223,17 @@ */ enum dio200_pci_model { +#ifdef CONFIG_HAS_IOPORT pci215_model, pci272_model, +#endif /* CONFIG_HAS_IOPORT */ pcie215_model, pcie236_model, pcie296_model }; static const struct dio200_board dio200_pci_boards[] = { +#ifdef CONFIG_HAS_IOPORT [pci215_model] = { .name = "pci215", .mainbar = 2, @@ -252,6 +255,7 @@ static const struct dio200_board dio200_pci_boards[] = { .sdinfo = { 0x00, 0x08, 0x10, 0x3f }, .has_int_sce = true, }, +#endif /* CONFIG_HAS_IOPORT */ [pcie215_model] = { .name = "pcie215", .mainbar = 1, @@ -364,8 +368,12 @@ static int dio200_pci_auto_attach(struct comedi_device *dev, "error! cannot remap registers\n"); return -ENOMEM; } - } else { + } else if (IS_ENABLED(CONFIG_HAS_IOPORT)) { dev->iobase = pci_resource_start(pci_dev, bar); + } else { + dev_err(dev->class_dev, + "error! need I/O port support\n"); + return -ENXIO; } if (board->is_pcie) { @@ -385,8 +393,10 @@ static struct comedi_driver dio200_pci_comedi_driver = { }; static const struct pci_device_id dio200_pci_table[] = { +#ifdef CONFIG_HAS_IOPORT { PCI_VDEVICE(AMPLICON, 0x000b), pci215_model }, { PCI_VDEVICE(AMPLICON, 0x000a), pci272_model }, +#endif /* CONFIG_HAS_IOPORT */ { PCI_VDEVICE(AMPLICON, 0x0011), pcie236_model }, { PCI_VDEVICE(AMPLICON, 0x0012), pcie215_model }, { PCI_VDEVICE(AMPLICON, 0x0014), pcie296_model }, diff --git a/drivers/comedi/drivers/amplc_pc236_common.c b/drivers/comedi/drivers/amplc_pc236_common.c index 9f4f89b1ef23..326ca72c24ec 100644 --- a/drivers/comedi/drivers/amplc_pc236_common.c +++ b/drivers/comedi/drivers/amplc_pc236_common.c @@ -147,7 +147,7 @@ int amplc_pc236_common_attach(struct comedi_device *dev, unsigned long iobase, s = &dev->subdevices[0]; /* digital i/o subdevice (8255) */ - ret = subdev_8255_init(dev, s, NULL, 0x00); + ret = subdev_8255_io_init(dev, s, 0x00); if (ret) return ret; diff --git a/drivers/comedi/drivers/amplc_pci224.c b/drivers/comedi/drivers/amplc_pci224.c index 5a04e55daeea..1373637c2ca2 100644 --- a/drivers/comedi/drivers/amplc_pci224.c +++ b/drivers/comedi/drivers/amplc_pci224.c @@ -1051,10 +1051,10 @@ pci224_auto_attach(struct comedi_device *dev, unsigned long context_model) outw(devpriv->daccon | PCI224_DACCON_FIFORESET, dev->iobase + PCI224_DACCON); - dev->pacer = comedi_8254_init(devpriv->iobase1 + PCI224_Z2_BASE, - I8254_OSC_BASE_10MHZ, I8254_IO8, 0); - if (!dev->pacer) - return -ENOMEM; + dev->pacer = comedi_8254_io_alloc(devpriv->iobase1 + PCI224_Z2_BASE, + I8254_OSC_BASE_10MHZ, I8254_IO8, 0); + if (IS_ERR(dev->pacer)) + return PTR_ERR(dev->pacer); ret = comedi_alloc_subdevices(dev, 1); if (ret) diff --git a/drivers/comedi/drivers/amplc_pci230.c b/drivers/comedi/drivers/amplc_pci230.c index 92ba8b8c0172..c74209c2e83a 100644 --- a/drivers/comedi/drivers/amplc_pci230.c +++ b/drivers/comedi/drivers/amplc_pci230.c @@ -2475,10 +2475,10 @@ static int pci230_auto_attach(struct comedi_device *dev, dev->irq = pci_dev->irq; } - dev->pacer = comedi_8254_init(dev->iobase + PCI230_Z2_CT_BASE, - 0, I8254_IO8, 0); - if (!dev->pacer) - return -ENOMEM; + dev->pacer = comedi_8254_io_alloc(dev->iobase + PCI230_Z2_CT_BASE, + 0, I8254_IO8, 0); + if (IS_ERR(dev->pacer)) + return PTR_ERR(dev->pacer); rc = comedi_alloc_subdevices(dev, 3); if (rc) @@ -2529,7 +2529,7 @@ static int pci230_auto_attach(struct comedi_device *dev, s = &dev->subdevices[2]; /* digital i/o subdevice */ if (board->have_dio) { - rc = subdev_8255_init(dev, s, NULL, PCI230_PPI_X_BASE); + rc = subdev_8255_io_init(dev, s, PCI230_PPI_X_BASE); if (rc) return rc; } else { diff --git a/drivers/comedi/drivers/cb_das16_cs.c b/drivers/comedi/drivers/cb_das16_cs.c index 8e0d2fa5f95d..306208a0695b 100644 --- a/drivers/comedi/drivers/cb_das16_cs.c +++ b/drivers/comedi/drivers/cb_das16_cs.c @@ -363,10 +363,10 @@ static int das16cs_auto_attach(struct comedi_device *dev, if (!devpriv) return -ENOMEM; - dev->pacer = comedi_8254_init(dev->iobase + DAS16CS_TIMER_BASE, - I8254_OSC_BASE_10MHZ, I8254_IO16, 0); - if (!dev->pacer) - return -ENOMEM; + dev->pacer = comedi_8254_io_alloc(dev->iobase + DAS16CS_TIMER_BASE, + I8254_OSC_BASE_10MHZ, I8254_IO16, 0); + if (IS_ERR(dev->pacer)) + return PTR_ERR(dev->pacer); ret = comedi_alloc_subdevices(dev, 4); if (ret) diff --git a/drivers/comedi/drivers/cb_pcidas.c b/drivers/comedi/drivers/cb_pcidas.c index 0c7576b967fc..8bb9b0623869 100644 --- a/drivers/comedi/drivers/cb_pcidas.c +++ b/drivers/comedi/drivers/cb_pcidas.c @@ -1288,16 +1288,16 @@ static int cb_pcidas_auto_attach(struct comedi_device *dev, } dev->irq = pcidev->irq; - dev->pacer = comedi_8254_init(dev->iobase + PCIDAS_AI_8254_BASE, - I8254_OSC_BASE_10MHZ, I8254_IO8, 0); - if (!dev->pacer) - return -ENOMEM; + dev->pacer = comedi_8254_io_alloc(dev->iobase + PCIDAS_AI_8254_BASE, + I8254_OSC_BASE_10MHZ, I8254_IO8, 0); + if (IS_ERR(dev->pacer)) + return PTR_ERR(dev->pacer); - devpriv->ao_pacer = comedi_8254_init(dev->iobase + PCIDAS_AO_8254_BASE, - I8254_OSC_BASE_10MHZ, - I8254_IO8, 0); - if (!devpriv->ao_pacer) - return -ENOMEM; + devpriv->ao_pacer = + comedi_8254_io_alloc(dev->iobase + PCIDAS_AO_8254_BASE, + I8254_OSC_BASE_10MHZ, I8254_IO8, 0); + if (IS_ERR(devpriv->ao_pacer)) + return PTR_ERR(devpriv->ao_pacer); ret = comedi_alloc_subdevices(dev, 7); if (ret) @@ -1352,7 +1352,7 @@ static int cb_pcidas_auto_attach(struct comedi_device *dev, /* 8255 */ s = &dev->subdevices[2]; - ret = subdev_8255_init(dev, s, NULL, PCIDAS_8255_BASE); + ret = subdev_8255_io_init(dev, s, PCIDAS_8255_BASE); if (ret) return ret; @@ -1453,7 +1453,8 @@ static void cb_pcidas_detach(struct comedi_device *dev) if (devpriv->amcc) outl(INTCSR_INBOX_INTR_STATUS, devpriv->amcc + AMCC_OP_REG_INTCSR); - kfree(devpriv->ao_pacer); + if (!IS_ERR(devpriv->ao_pacer)) + kfree(devpriv->ao_pacer); } comedi_pci_detach(dev); } diff --git a/drivers/comedi/drivers/cb_pcidas64.c b/drivers/comedi/drivers/cb_pcidas64.c index ca6038a25f26..ff19fc3859e4 100644 --- a/drivers/comedi/drivers/cb_pcidas64.c +++ b/drivers/comedi/drivers/cb_pcidas64.c @@ -3877,11 +3877,10 @@ static int setup_subdevices(struct comedi_device *dev) s = &dev->subdevices[4]; if (board->has_8255) { if (board->layout == LAYOUT_4020) { - ret = subdev_8255_init(dev, s, dio_callback_4020, - I8255_4020_REG); + ret = subdev_8255_cb_init(dev, s, dio_callback_4020, + I8255_4020_REG); } else { - ret = subdev_8255_mm_init(dev, s, NULL, - DIO_8255_OFFSET); + ret = subdev_8255_mm_init(dev, s, DIO_8255_OFFSET); } if (ret) return ret; diff --git a/drivers/comedi/drivers/cb_pcidda.c b/drivers/comedi/drivers/cb_pcidda.c index c52204a6bda4..c353d0f87da9 100644 --- a/drivers/comedi/drivers/cb_pcidda.c +++ b/drivers/comedi/drivers/cb_pcidda.c @@ -365,7 +365,7 @@ static int cb_pcidda_auto_attach(struct comedi_device *dev, /* two 8255 digital io subdevices */ for (i = 0; i < 2; i++) { s = &dev->subdevices[1 + i]; - ret = subdev_8255_init(dev, s, NULL, i * I8255_SIZE); + ret = subdev_8255_io_init(dev, s, i * I8255_SIZE); if (ret) return ret; } diff --git a/drivers/comedi/drivers/cb_pcimdas.c b/drivers/comedi/drivers/cb_pcimdas.c index 8bdb00774f11..641c30df392e 100644 --- a/drivers/comedi/drivers/cb_pcimdas.c +++ b/drivers/comedi/drivers/cb_pcimdas.c @@ -364,11 +364,11 @@ static int cb_pcimdas_auto_attach(struct comedi_device *dev, devpriv->BADR3 = pci_resource_start(pcidev, 3); dev->iobase = pci_resource_start(pcidev, 4); - dev->pacer = comedi_8254_init(devpriv->BADR3 + PCIMDAS_8254_BASE, - cb_pcimdas_pacer_clk(dev), - I8254_IO8, 0); - if (!dev->pacer) - return -ENOMEM; + dev->pacer = comedi_8254_io_alloc(devpriv->BADR3 + PCIMDAS_8254_BASE, + cb_pcimdas_pacer_clk(dev), + I8254_IO8, 0); + if (IS_ERR(dev->pacer)) + return PTR_ERR(dev->pacer); ret = comedi_alloc_subdevices(dev, 6); if (ret) @@ -405,7 +405,7 @@ static int cb_pcimdas_auto_attach(struct comedi_device *dev, /* Digital I/O subdevice */ s = &dev->subdevices[2]; - ret = subdev_8255_init(dev, s, NULL, PCIMDAS_8255_BASE); + ret = subdev_8255_io_init(dev, s, PCIMDAS_8255_BASE); if (ret) return ret; diff --git a/drivers/comedi/drivers/cb_pcimdda.c b/drivers/comedi/drivers/cb_pcimdda.c index bf8093a10315..541b5742bb1b 100644 --- a/drivers/comedi/drivers/cb_pcimdda.c +++ b/drivers/comedi/drivers/cb_pcimdda.c @@ -154,7 +154,7 @@ static int cb_pcimdda_auto_attach(struct comedi_device *dev, s = &dev->subdevices[1]; /* digital i/o subdevice */ - return subdev_8255_init(dev, s, NULL, PCIMDDA_8255_BASE_REG); + return subdev_8255_io_init(dev, s, PCIMDDA_8255_BASE_REG); } static struct comedi_driver cb_pcimdda_driver = { diff --git a/drivers/comedi/drivers/comedi_8254.c b/drivers/comedi/drivers/comedi_8254.c index b4185c1b2695..6beca2a6d66e 100644 --- a/drivers/comedi/drivers/comedi_8254.c +++ b/drivers/comedi/drivers/comedi_8254.c @@ -24,14 +24,17 @@ * * This module provides the following basic functions: * - * comedi_8254_init() / comedi_8254_mm_init() + * comedi_8254_io_alloc() / comedi_8254_mm_alloc() * Initializes this module to access the 8254 registers. The _mm version - * sets up the module for MMIO register access the other for PIO access. - * The pointer returned from these functions is normally stored in the - * comedi_device dev->pacer and will be freed by the comedi core during - * the driver (*detach). If a driver has multiple 8254 devices, they need - * to be stored in the drivers private data and freed when the driver is - * detached. + * sets up the module for MMIO register access; the _io version sets it + * up for PIO access. These functions return a pointer to a struct + * comedi_8254 on success, or an ERR_PTR value on failure. The pointer + * returned from these functions is normally stored in the comedi_device + * dev->pacer and will be freed by the comedi core during the driver + * (*detach). If a driver has multiple 8254 devices, they need to be + * stored in the drivers private data and freed when the driver is + * detached. If the ERR_PTR value is stored, code should check the + * pointer value with !IS_ERR(pointer) before freeing. * * NOTE: The counters are reset by setting them to I8254_MODE0 as part of * this initialization. @@ -119,63 +122,105 @@ #include <linux/comedi/comedidev.h> #include <linux/comedi/comedi_8254.h> -static unsigned int __i8254_read(struct comedi_8254 *i8254, unsigned int reg) +#ifdef CONFIG_HAS_IOPORT + +static unsigned int i8254_io8_cb(struct comedi_8254 *i8254, int dir, + unsigned int reg, unsigned int val) { - unsigned int reg_offset = (reg * i8254->iosize) << i8254->regshift; - unsigned int val; + unsigned long iobase = i8254->context; + unsigned int reg_offset = (reg * I8254_IO8) << i8254->regshift; - switch (i8254->iosize) { - default: - case I8254_IO8: - if (i8254->mmio) - val = readb(i8254->mmio + reg_offset); - else - val = inb(i8254->iobase + reg_offset); - break; - case I8254_IO16: - if (i8254->mmio) - val = readw(i8254->mmio + reg_offset); - else - val = inw(i8254->iobase + reg_offset); - break; - case I8254_IO32: - if (i8254->mmio) - val = readl(i8254->mmio + reg_offset); - else - val = inl(i8254->iobase + reg_offset); - break; + if (dir) { + outb(val, iobase + reg_offset); + return 0; + } else { + return inb(iobase + reg_offset); } - return val & 0xff; } -static void __i8254_write(struct comedi_8254 *i8254, - unsigned int val, unsigned int reg) +static unsigned int i8254_io16_cb(struct comedi_8254 *i8254, int dir, + unsigned int reg, unsigned int val) { - unsigned int reg_offset = (reg * i8254->iosize) << i8254->regshift; + unsigned long iobase = i8254->context; + unsigned int reg_offset = (reg * I8254_IO16) << i8254->regshift; - switch (i8254->iosize) { - default: - case I8254_IO8: - if (i8254->mmio) - writeb(val, i8254->mmio + reg_offset); - else - outb(val, i8254->iobase + reg_offset); - break; - case I8254_IO16: - if (i8254->mmio) - writew(val, i8254->mmio + reg_offset); - else - outw(val, i8254->iobase + reg_offset); - break; - case I8254_IO32: - if (i8254->mmio) - writel(val, i8254->mmio + reg_offset); - else - outl(val, i8254->iobase + reg_offset); - break; + if (dir) { + outw(val, iobase + reg_offset); + return 0; + } else { + return inw(iobase + reg_offset); } } +static unsigned int i8254_io32_cb(struct comedi_8254 *i8254, int dir, + unsigned int reg, unsigned int val) +{ + unsigned long iobase = i8254->context; + unsigned int reg_offset = (reg * I8254_IO32) << i8254->regshift; + + if (dir) { + outl(val, iobase + reg_offset); + return 0; + } else { + return inl(iobase + reg_offset); + } +} + +#endif /* CONFIG_HAS_IOPORT */ + +static unsigned int i8254_mmio8_cb(struct comedi_8254 *i8254, int dir, + unsigned int reg, unsigned int val) +{ + void __iomem *mmiobase = (void __iomem *)i8254->context; + unsigned int reg_offset = (reg * I8254_IO8) << i8254->regshift; + + if (dir) { + writeb(val, mmiobase + reg_offset); + return 0; + } else { + return readb(mmiobase + reg_offset); + } +} + +static unsigned int i8254_mmio16_cb(struct comedi_8254 *i8254, int dir, + unsigned int reg, unsigned int val) +{ + void __iomem *mmiobase = (void __iomem *)i8254->context; + unsigned int reg_offset = (reg * I8254_IO16) << i8254->regshift; + + if (dir) { + writew(val, mmiobase + reg_offset); + return 0; + } else { + return readw(mmiobase + reg_offset); + } +} + +static unsigned int i8254_mmio32_cb(struct comedi_8254 *i8254, int dir, + unsigned int reg, unsigned int val) +{ + void __iomem *mmiobase = (void __iomem *)i8254->context; + unsigned int reg_offset = (reg * I8254_IO32) << i8254->regshift; + + if (dir) { + writel(val, mmiobase + reg_offset); + return 0; + } else { + return readl(mmiobase + reg_offset); + } +} + +static unsigned int __i8254_read(struct comedi_8254 *i8254, unsigned int reg) +{ + return 0xff & i8254->iocb(i8254, 0, reg, 0); +} + +static void __i8254_write(struct comedi_8254 *i8254, + unsigned int val, unsigned int reg) +{ + i8254->iocb(i8254, 1, reg, val); +} + /** * comedi_8254_status - return the status of a counter * @i8254: comedi_8254 struct for the timer @@ -571,8 +616,8 @@ void comedi_8254_subdevice_init(struct comedi_subdevice *s, } EXPORT_SYMBOL_GPL(comedi_8254_subdevice_init); -static struct comedi_8254 *__i8254_init(unsigned long iobase, - void __iomem *mmio, +static struct comedi_8254 *__i8254_init(comedi_8254_iocb_fn *iocb, + unsigned long context, unsigned int osc_base, unsigned int iosize, unsigned int regshift) @@ -583,14 +628,17 @@ static struct comedi_8254 *__i8254_init(unsigned long iobase, /* sanity check that the iosize is valid */ if (!(iosize == I8254_IO8 || iosize == I8254_IO16 || iosize == I8254_IO32)) - return NULL; + return ERR_PTR(-EINVAL); + + if (!iocb) + return ERR_PTR(-EINVAL); i8254 = kzalloc(sizeof(*i8254), GFP_KERNEL); if (!i8254) - return NULL; + return ERR_PTR(-ENOMEM); - i8254->iobase = iobase; - i8254->mmio = mmio; + i8254->iocb = iocb; + i8254->context = context; i8254->iosize = iosize; i8254->regshift = regshift; @@ -604,39 +652,77 @@ static struct comedi_8254 *__i8254_init(unsigned long iobase, return i8254; } +#ifdef CONFIG_HAS_IOPORT + /** - * comedi_8254_init - allocate and initialize the 8254 device for pio access + * comedi_8254_io_alloc - allocate and initialize the 8254 device for pio access * @iobase: port I/O base address * @osc_base: base time of the counter in ns * OPTIONAL - only used by comedi_8254_cascade_ns_to_timer() * @iosize: I/O register size * @regshift: register gap shift + * + * Return: A pointer to a struct comedi_8254 or an ERR_PTR value. */ -struct comedi_8254 *comedi_8254_init(unsigned long iobase, - unsigned int osc_base, - unsigned int iosize, - unsigned int regshift) +struct comedi_8254 *comedi_8254_io_alloc(unsigned long iobase, + unsigned int osc_base, + unsigned int iosize, + unsigned int regshift) { - return __i8254_init(iobase, NULL, osc_base, iosize, regshift); + comedi_8254_iocb_fn *iocb; + + switch (iosize) { + case I8254_IO8: + iocb = i8254_io8_cb; + break; + case I8254_IO16: + iocb = i8254_io16_cb; + break; + case I8254_IO32: + iocb = i8254_io32_cb; + break; + default: + return ERR_PTR(-EINVAL); + } + return __i8254_init(iocb, iobase, osc_base, iosize, regshift); } -EXPORT_SYMBOL_GPL(comedi_8254_init); +EXPORT_SYMBOL_GPL(comedi_8254_io_alloc); + +#endif /* CONFIG_HAS_IOPORT */ /** - * comedi_8254_mm_init - allocate and initialize the 8254 device for mmio access + * comedi_8254_mm_alloc - allocate and initialize the 8254 device for mmio access * @mmio: memory mapped I/O base address * @osc_base: base time of the counter in ns * OPTIONAL - only used by comedi_8254_cascade_ns_to_timer() * @iosize: I/O register size * @regshift: register gap shift + * + * Return: A pointer to a struct comedi_8254 or an ERR_PTR value. */ -struct comedi_8254 *comedi_8254_mm_init(void __iomem *mmio, - unsigned int osc_base, - unsigned int iosize, - unsigned int regshift) +struct comedi_8254 *comedi_8254_mm_alloc(void __iomem *mmio, + unsigned int osc_base, + unsigned int iosize, + unsigned int regshift) { - return __i8254_init(0, mmio, osc_base, iosize, regshift); + comedi_8254_iocb_fn *iocb; + + switch (iosize) { + case I8254_IO8: + iocb = i8254_mmio8_cb; + break; + case I8254_IO16: + iocb = i8254_mmio16_cb; + break; + case I8254_IO32: + iocb = i8254_mmio32_cb; + break; + default: + return ERR_PTR(-EINVAL); + } + return __i8254_init(iocb, (unsigned long)mmio, osc_base, iosize, regshift); } -EXPORT_SYMBOL_GPL(comedi_8254_mm_init); +EXPORT_SYMBOL_GPL(comedi_8254_mm_alloc); static int __init comedi_8254_module_init(void) { diff --git a/drivers/comedi/drivers/comedi_8255.c b/drivers/comedi/drivers/comedi_8255.c index 5562b9cd0a17..e4974b508328 100644 --- a/drivers/comedi/drivers/comedi_8255.c +++ b/drivers/comedi/drivers/comedi_8255.c @@ -33,11 +33,13 @@ #include <linux/comedi/comedi_8255.h> struct subdev_8255_private { - unsigned long regbase; + unsigned long context; int (*io)(struct comedi_device *dev, int dir, int port, int data, - unsigned long regbase); + unsigned long context); }; +#ifdef CONFIG_HAS_IOPORT + static int subdev_8255_io(struct comedi_device *dev, int dir, int port, int data, unsigned long regbase) { @@ -48,6 +50,8 @@ static int subdev_8255_io(struct comedi_device *dev, return inb(dev->iobase + regbase + port); } +#endif /* CONFIG_HAS_IOPORT */ + static int subdev_8255_mmio(struct comedi_device *dev, int dir, int port, int data, unsigned long regbase) { @@ -64,7 +68,7 @@ static int subdev_8255_insn(struct comedi_device *dev, unsigned int *data) { struct subdev_8255_private *spriv = s->private; - unsigned long regbase = spriv->regbase; + unsigned long context = spriv->context; unsigned int mask; unsigned int v; @@ -72,18 +76,18 @@ static int subdev_8255_insn(struct comedi_device *dev, if (mask) { if (mask & 0xff) spriv->io(dev, 1, I8255_DATA_A_REG, - s->state & 0xff, regbase); + s->state & 0xff, context); if (mask & 0xff00) spriv->io(dev, 1, I8255_DATA_B_REG, - (s->state >> 8) & 0xff, regbase); + (s->state >> 8) & 0xff, context); if (mask & 0xff0000) spriv->io(dev, 1, I8255_DATA_C_REG, - (s->state >> 16) & 0xff, regbase); + (s->state >> 16) & 0xff, context); } - v = spriv->io(dev, 0, I8255_DATA_A_REG, 0, regbase); - v |= (spriv->io(dev, 0, I8255_DATA_B_REG, 0, regbase) << 8); - v |= (spriv->io(dev, 0, I8255_DATA_C_REG, 0, regbase) << 16); + v = spriv->io(dev, 0, I8255_DATA_A_REG, 0, context); + v |= (spriv->io(dev, 0, I8255_DATA_B_REG, 0, context) << 8); + v |= (spriv->io(dev, 0, I8255_DATA_C_REG, 0, context) << 16); data[1] = v; @@ -94,7 +98,7 @@ static void subdev_8255_do_config(struct comedi_device *dev, struct comedi_subdevice *s) { struct subdev_8255_private *spriv = s->private; - unsigned long regbase = spriv->regbase; + unsigned long context = spriv->context; int config; config = I8255_CTRL_CW; @@ -108,7 +112,7 @@ static void subdev_8255_do_config(struct comedi_device *dev, if (!(s->io_bits & 0xf00000)) config |= I8255_CTRL_C_HI_IO; - spriv->io(dev, 1, I8255_CTRL_REG, config, regbase); + spriv->io(dev, 1, I8255_CTRL_REG, config, context); } static int subdev_8255_insn_config(struct comedi_device *dev, @@ -142,23 +146,19 @@ static int __subdev_8255_init(struct comedi_device *dev, struct comedi_subdevice *s, int (*io)(struct comedi_device *dev, int dir, int port, int data, - unsigned long regbase), - unsigned long regbase, - bool is_mmio) + unsigned long context), + unsigned long context) { struct subdev_8255_private *spriv; + if (!io) + return -EINVAL; + spriv = comedi_alloc_spriv(s, sizeof(*spriv)); if (!spriv) return -ENOMEM; - if (io) - spriv->io = io; - else if (is_mmio) - spriv->io = subdev_8255_mmio; - else - spriv->io = subdev_8255_io; - spriv->regbase = regbase; + spriv->context = context; s->type = COMEDI_SUBD_DIO; s->subdev_flags = SDF_READABLE | SDF_WRITABLE; @@ -173,89 +173,88 @@ static int __subdev_8255_init(struct comedi_device *dev, return 0; } +#ifdef CONFIG_HAS_IOPORT + /** - * subdev_8255_init - initialize DIO subdevice for driving I/O mapped 8255 + * subdev_8255_io_init - initialize DIO subdevice for driving I/O mapped 8255 * @dev: comedi device owning subdevice * @s: comedi subdevice to initialize - * @io: (optional) register I/O call-back function - * @regbase: offset of 8255 registers from dev->iobase, or call-back context + * @regbase: offset of 8255 registers from dev->iobase * * Initializes a comedi subdevice as a DIO subdevice driving an 8255 chip. * - * If the optional I/O call-back function is provided, its prototype is of - * the following form: - * - * int my_8255_callback(struct comedi_device *dev, int dir, int port, - * int data, unsigned long regbase); - * - * where 'dev', and 'regbase' match the values passed to this function, - * 'port' is the 8255 port number 0 to 3 (including the control port), 'dir' - * is the direction (0 for read, 1 for write) and 'data' is the value to be - * written. It should return 0 if writing or the value read if reading. - * - * If the optional I/O call-back function is not provided, an internal - * call-back function is used which uses consecutive I/O port addresses - * starting at dev->iobase + regbase. - * * Return: -ENOMEM if failed to allocate memory, zero on success. */ -int subdev_8255_init(struct comedi_device *dev, struct comedi_subdevice *s, - int (*io)(struct comedi_device *dev, int dir, int port, - int data, unsigned long regbase), +int subdev_8255_io_init(struct comedi_device *dev, struct comedi_subdevice *s, unsigned long regbase) { - return __subdev_8255_init(dev, s, io, regbase, false); + return __subdev_8255_init(dev, s, subdev_8255_io, regbase); } -EXPORT_SYMBOL_GPL(subdev_8255_init); +EXPORT_SYMBOL_GPL(subdev_8255_io_init); + +#endif /* CONFIG_HAS_IOPORT */ /** * subdev_8255_mm_init - initialize DIO subdevice for driving mmio-mapped 8255 * @dev: comedi device owning subdevice * @s: comedi subdevice to initialize - * @io: (optional) register I/O call-back function - * @regbase: offset of 8255 registers from dev->mmio, or call-back context + * @regbase: offset of 8255 registers from dev->mmio * * Initializes a comedi subdevice as a DIO subdevice driving an 8255 chip. * - * If the optional I/O call-back function is provided, its prototype is of - * the following form: + * Return: -ENOMEM if failed to allocate memory, zero on success. + */ +int subdev_8255_mm_init(struct comedi_device *dev, struct comedi_subdevice *s, + unsigned long regbase) +{ + return __subdev_8255_init(dev, s, subdev_8255_mmio, regbase); +} +EXPORT_SYMBOL_GPL(subdev_8255_mm_init); + +/** + * subdev_8255_cb_init - initialize DIO subdevice for driving callback-mapped 8255 + * @dev: comedi device owning subdevice + * @s: comedi subdevice to initialize + * @io: register I/O call-back function + * @context: call-back context + * + * Initializes a comedi subdevice as a DIO subdevice driving an 8255 chip. + * + * The prototype of the I/O call-back function is of the following form: * * int my_8255_callback(struct comedi_device *dev, int dir, int port, - * int data, unsigned long regbase); + * int data, unsigned long context); * - * where 'dev', and 'regbase' match the values passed to this function, + * where 'dev', and 'context' match the values passed to this function, * 'port' is the 8255 port number 0 to 3 (including the control port), 'dir' * is the direction (0 for read, 1 for write) and 'data' is the value to be * written. It should return 0 if writing or the value read if reading. * - * If the optional I/O call-back function is not provided, an internal - * call-back function is used which uses consecutive MMIO virtual addresses - * starting at dev->mmio + regbase. * * Return: -ENOMEM if failed to allocate memory, zero on success. */ -int subdev_8255_mm_init(struct comedi_device *dev, struct comedi_subdevice *s, +int subdev_8255_cb_init(struct comedi_device *dev, struct comedi_subdevice *s, int (*io)(struct comedi_device *dev, int dir, int port, - int data, unsigned long regbase), - unsigned long regbase) + int data, unsigned long context), + unsigned long context) { - return __subdev_8255_init(dev, s, io, regbase, true); + return __subdev_8255_init(dev, s, io, context); } -EXPORT_SYMBOL_GPL(subdev_8255_mm_init); +EXPORT_SYMBOL_GPL(subdev_8255_cb_init); /** * subdev_8255_regbase - get offset of 8255 registers or call-back context * @s: comedi subdevice * - * Returns the 'regbase' parameter that was previously passed to - * subdev_8255_init() or subdev_8255_mm_init() to set up the subdevice. - * Only valid if the subdevice was set up successfully. + * Returns the 'regbase' or 'context' parameter that was previously passed to + * subdev_8255_io_init(), subdev_8255_mm_init(), or subdev_8255_cb_init() to + * set up the subdevice. Only valid if the subdevice was set up successfully. */ unsigned long subdev_8255_regbase(struct comedi_subdevice *s) { struct subdev_8255_private *spriv = s->private; - return spriv->regbase; + return spriv->context; } EXPORT_SYMBOL_GPL(subdev_8255_regbase); diff --git a/drivers/comedi/drivers/daqboard2000.c b/drivers/comedi/drivers/daqboard2000.c index c0a4e1b06fb3..897bf46b95ee 100644 --- a/drivers/comedi/drivers/daqboard2000.c +++ b/drivers/comedi/drivers/daqboard2000.c @@ -738,8 +738,8 @@ static int db2k_auto_attach(struct comedi_device *dev, unsigned long context) return result; s = &dev->subdevices[2]; - return subdev_8255_init(dev, s, db2k_8255_cb, - DB2K_REG_DIO_P2_EXP_IO_8_BIT); + return subdev_8255_cb_init(dev, s, db2k_8255_cb, + DB2K_REG_DIO_P2_EXP_IO_8_BIT); } static void db2k_detach(struct comedi_device *dev) diff --git a/drivers/comedi/drivers/das08.c b/drivers/comedi/drivers/das08.c index f8ab3af2e391..5d5b9174f88a 100644 --- a/drivers/comedi/drivers/das08.c +++ b/drivers/comedi/drivers/das08.c @@ -429,7 +429,7 @@ int das08_common_attach(struct comedi_device *dev, unsigned long iobase) s = &dev->subdevices[4]; /* 8255 */ if (board->i8255_offset != 0) { - ret = subdev_8255_init(dev, s, NULL, board->i8255_offset); + ret = subdev_8255_io_init(dev, s, board->i8255_offset); if (ret) return ret; } else { @@ -439,10 +439,11 @@ int das08_common_attach(struct comedi_device *dev, unsigned long iobase) /* Counter subdevice (8254) */ s = &dev->subdevices[5]; if (board->i8254_offset) { - dev->pacer = comedi_8254_init(dev->iobase + board->i8254_offset, - 0, I8254_IO8, 0); - if (!dev->pacer) - return -ENOMEM; + dev->pacer = + comedi_8254_io_alloc(dev->iobase + board->i8254_offset, + 0, I8254_IO8, 0); + if (IS_ERR(dev->pacer)) + return PTR_ERR(dev->pacer); comedi_8254_subdevice_init(s, dev->pacer); } else { diff --git a/drivers/comedi/drivers/das16.c b/drivers/comedi/drivers/das16.c index 728dc02156c8..4ed56a02150e 100644 --- a/drivers/comedi/drivers/das16.c +++ b/drivers/comedi/drivers/das16.c @@ -1067,10 +1067,10 @@ static int das16_attach(struct comedi_device *dev, struct comedi_devconfig *it) osc_base = I8254_OSC_BASE_1MHZ / it->options[3]; } - dev->pacer = comedi_8254_init(dev->iobase + DAS16_TIMER_BASE_REG, - osc_base, I8254_IO8, 0); - if (!dev->pacer) - return -ENOMEM; + dev->pacer = comedi_8254_io_alloc(dev->iobase + DAS16_TIMER_BASE_REG, + osc_base, I8254_IO8, 0); + if (IS_ERR(dev->pacer)) + return PTR_ERR(dev->pacer); das16_alloc_dma(dev, it->options[2]); @@ -1145,7 +1145,7 @@ static int das16_attach(struct comedi_device *dev, struct comedi_devconfig *it) /* 8255 Digital I/O subdevice */ if (board->has_8255) { s = &dev->subdevices[4]; - ret = subdev_8255_init(dev, s, NULL, board->i8255_offset); + ret = subdev_8255_io_init(dev, s, board->i8255_offset); if (ret) return ret; } diff --git a/drivers/comedi/drivers/das16m1.c b/drivers/comedi/drivers/das16m1.c index 275effb77746..b8ea737ad3d1 100644 --- a/drivers/comedi/drivers/das16m1.c +++ b/drivers/comedi/drivers/das16m1.c @@ -529,15 +529,16 @@ static int das16m1_attach(struct comedi_device *dev, dev->irq = it->options[1]; } - dev->pacer = comedi_8254_init(dev->iobase + DAS16M1_8254_IOBASE2, - I8254_OSC_BASE_10MHZ, I8254_IO8, 0); - if (!dev->pacer) - return -ENOMEM; + dev->pacer = comedi_8254_io_alloc(dev->iobase + DAS16M1_8254_IOBASE2, + I8254_OSC_BASE_10MHZ, I8254_IO8, 0); + if (IS_ERR(dev->pacer)) + return PTR_ERR(dev->pacer); - devpriv->counter = comedi_8254_init(dev->iobase + DAS16M1_8254_IOBASE1, - 0, I8254_IO8, 0); - if (!devpriv->counter) - return -ENOMEM; + devpriv->counter = + comedi_8254_io_alloc(dev->iobase + DAS16M1_8254_IOBASE1, + 0, I8254_IO8, 0); + if (IS_ERR(devpriv->counter)) + return PTR_ERR(devpriv->counter); ret = comedi_alloc_subdevices(dev, 4); if (ret) @@ -582,7 +583,7 @@ static int das16m1_attach(struct comedi_device *dev, /* Digital I/O subdevice (8255) */ s = &dev->subdevices[3]; - ret = subdev_8255_init(dev, s, NULL, DAS16M1_8255_IOBASE); + ret = subdev_8255_io_init(dev, s, DAS16M1_8255_IOBASE); if (ret) return ret; @@ -603,7 +604,8 @@ static void das16m1_detach(struct comedi_device *dev) if (devpriv) { if (devpriv->extra_iobase) release_region(devpriv->extra_iobase, DAS16M1_SIZE2); - kfree(devpriv->counter); + if (!IS_ERR(devpriv->counter)) + kfree(devpriv->counter); } comedi_legacy_detach(dev); } diff --git a/drivers/comedi/drivers/das1800.c b/drivers/comedi/drivers/das1800.c index f09608c0f4ff..7117c67aee7e 100644 --- a/drivers/comedi/drivers/das1800.c +++ b/drivers/comedi/drivers/das1800.c @@ -1233,10 +1233,10 @@ static int das1800_attach(struct comedi_device *dev, if (!devpriv->fifo_buf) return -ENOMEM; - dev->pacer = comedi_8254_init(dev->iobase + DAS1800_COUNTER, - I8254_OSC_BASE_5MHZ, I8254_IO8, 0); - if (!dev->pacer) - return -ENOMEM; + dev->pacer = comedi_8254_io_alloc(dev->iobase + DAS1800_COUNTER, + I8254_OSC_BASE_5MHZ, I8254_IO8, 0); + if (IS_ERR(dev->pacer)) + return PTR_ERR(dev->pacer); ret = comedi_alloc_subdevices(dev, 4); if (ret) diff --git a/drivers/comedi/drivers/das6402.c b/drivers/comedi/drivers/das6402.c index 1af394591e74..68f95330de45 100644 --- a/drivers/comedi/drivers/das6402.c +++ b/drivers/comedi/drivers/das6402.c @@ -590,10 +590,10 @@ static int das6402_attach(struct comedi_device *dev, } } - dev->pacer = comedi_8254_init(dev->iobase + DAS6402_TIMER_BASE, - I8254_OSC_BASE_10MHZ, I8254_IO8, 0); - if (!dev->pacer) - return -ENOMEM; + dev->pacer = comedi_8254_io_alloc(dev->iobase + DAS6402_TIMER_BASE, + I8254_OSC_BASE_10MHZ, I8254_IO8, 0); + if (IS_ERR(dev->pacer)) + return PTR_ERR(dev->pacer); ret = comedi_alloc_subdevices(dev, 4); if (ret) diff --git a/drivers/comedi/drivers/das800.c b/drivers/comedi/drivers/das800.c index 4ca33f46eaa7..300775523031 100644 --- a/drivers/comedi/drivers/das800.c +++ b/drivers/comedi/drivers/das800.c @@ -672,10 +672,10 @@ static int das800_attach(struct comedi_device *dev, struct comedi_devconfig *it) dev->irq = irq; } - dev->pacer = comedi_8254_init(dev->iobase + DAS800_8254, - I8254_OSC_BASE_1MHZ, I8254_IO8, 0); - if (!dev->pacer) - return -ENOMEM; + dev->pacer = comedi_8254_io_alloc(dev->iobase + DAS800_8254, + I8254_OSC_BASE_1MHZ, I8254_IO8, 0); + if (IS_ERR(dev->pacer)) + return PTR_ERR(dev->pacer); ret = comedi_alloc_subdevices(dev, 3); if (ret) diff --git a/drivers/comedi/drivers/dmm32at.c b/drivers/comedi/drivers/dmm32at.c index fe023c722aa3..644e3b643c79 100644 --- a/drivers/comedi/drivers/dmm32at.c +++ b/drivers/comedi/drivers/dmm32at.c @@ -599,7 +599,8 @@ static int dmm32at_attach(struct comedi_device *dev, /* Digital I/O subdevice */ s = &dev->subdevices[2]; - return subdev_8255_init(dev, s, dmm32at_8255_io, DMM32AT_8255_IOBASE); + return subdev_8255_cb_init(dev, s, dmm32at_8255_io, + DMM32AT_8255_IOBASE); } static struct comedi_driver dmm32at_driver = { diff --git a/drivers/comedi/drivers/me4000.c b/drivers/comedi/drivers/me4000.c index 9aea02b86ed9..7dd3a0071863 100644 --- a/drivers/comedi/drivers/me4000.c +++ b/drivers/comedi/drivers/me4000.c @@ -1209,9 +1209,9 @@ static int me4000_auto_attach(struct comedi_device *dev, if (!timer_base) return -ENODEV; - dev->pacer = comedi_8254_init(timer_base, 0, I8254_IO8, 0); - if (!dev->pacer) - return -ENOMEM; + dev->pacer = comedi_8254_io_alloc(timer_base, 0, I8254_IO8, 0); + if (IS_ERR(dev->pacer)) + return PTR_ERR(dev->pacer); comedi_8254_subdevice_init(s, dev->pacer); } else { diff --git a/drivers/comedi/drivers/ni_at_a2150.c b/drivers/comedi/drivers/ni_at_a2150.c index df8d219e6723..e4e5a0ebd195 100644 --- a/drivers/comedi/drivers/ni_at_a2150.c +++ b/drivers/comedi/drivers/ni_at_a2150.c @@ -707,10 +707,10 @@ static int a2150_attach(struct comedi_device *dev, struct comedi_devconfig *it) /* an IRQ and DMA are required to support async commands */ a2150_alloc_irq_and_dma(dev, it); - dev->pacer = comedi_8254_init(dev->iobase + I8253_BASE_REG, - 0, I8254_IO8, 0); - if (!dev->pacer) - return -ENOMEM; + dev->pacer = comedi_8254_io_alloc(dev->iobase + I8253_BASE_REG, + 0, I8254_IO8, 0); + if (IS_ERR(dev->pacer)) + return PTR_ERR(dev->pacer); ret = comedi_alloc_subdevices(dev, 1); if (ret) diff --git a/drivers/comedi/drivers/ni_at_ao.c b/drivers/comedi/drivers/ni_at_ao.c index 9f3147b72aa8..9cf6b4ff6b65 100644 --- a/drivers/comedi/drivers/ni_at_ao.c +++ b/drivers/comedi/drivers/ni_at_ao.c @@ -303,10 +303,10 @@ static int atao_attach(struct comedi_device *dev, struct comedi_devconfig *it) if (!devpriv) return -ENOMEM; - dev->pacer = comedi_8254_init(dev->iobase + ATAO_82C53_BASE, - 0, I8254_IO8, 0); - if (!dev->pacer) - return -ENOMEM; + dev->pacer = comedi_8254_io_alloc(dev->iobase + ATAO_82C53_BASE, + 0, I8254_IO8, 0); + if (IS_ERR(dev->pacer)) + return PTR_ERR(dev->pacer); ret = comedi_alloc_subdevices(dev, 4); if (ret) diff --git a/drivers/comedi/drivers/ni_atmio16d.c b/drivers/comedi/drivers/ni_atmio16d.c index 9fa902529a8e..e5e7cc423c87 100644 --- a/drivers/comedi/drivers/ni_atmio16d.c +++ b/drivers/comedi/drivers/ni_atmio16d.c @@ -677,7 +677,7 @@ static int atmio16d_attach(struct comedi_device *dev, /* 8255 subdevice */ s = &dev->subdevices[3]; if (board->has_8255) { - ret = subdev_8255_init(dev, s, NULL, 0x00); + ret = subdev_8255_io_init(dev, s, 0x00); if (ret) return ret; } else { diff --git a/drivers/comedi/drivers/ni_daq_dio24.c b/drivers/comedi/drivers/ni_daq_dio24.c index 487733111023..9419caf02edc 100644 --- a/drivers/comedi/drivers/ni_daq_dio24.c +++ b/drivers/comedi/drivers/ni_daq_dio24.c @@ -45,7 +45,7 @@ static int dio24_auto_attach(struct comedi_device *dev, /* 8255 dio */ s = &dev->subdevices[0]; - return subdev_8255_init(dev, s, NULL, 0x00); + return subdev_8255_io_init(dev, s, 0x00); } static struct comedi_driver driver_dio24 = { diff --git a/drivers/comedi/drivers/ni_labpc_common.c b/drivers/comedi/drivers/ni_labpc_common.c index 763249653228..7e0ce0ce0adf 100644 --- a/drivers/comedi/drivers/ni_labpc_common.c +++ b/drivers/comedi/drivers/ni_labpc_common.c @@ -78,6 +78,9 @@ static const struct comedi_lrange range_labpc_ao = { * functions that do inb/outb and readb/writeb so we can use * function pointers to decide which to use */ + +#ifdef CONFIG_HAS_IOPORT + static unsigned int labpc_inb(struct comedi_device *dev, unsigned long reg) { return inb(dev->iobase + reg); @@ -89,6 +92,8 @@ static void labpc_outb(struct comedi_device *dev, outb(byte, dev->iobase + reg); } +#endif /* CONFIG_HAS_IOPORT */ + static unsigned int labpc_readb(struct comedi_device *dev, unsigned long reg) { return readb(dev->mmio + reg); @@ -1200,8 +1205,12 @@ int labpc_common_attach(struct comedi_device *dev, devpriv->read_byte = labpc_readb; devpriv->write_byte = labpc_writeb; } else { +#ifdef CONFIG_HAS_IOPORT devpriv->read_byte = labpc_inb; devpriv->write_byte = labpc_outb; +#else + return -ENXIO; +#endif } /* initialize board's command registers */ @@ -1222,24 +1231,24 @@ int labpc_common_attach(struct comedi_device *dev, } if (dev->mmio) { - dev->pacer = comedi_8254_mm_init(dev->mmio + COUNTER_B_BASE_REG, - I8254_OSC_BASE_2MHZ, - I8254_IO8, 0); - devpriv->counter = comedi_8254_mm_init(dev->mmio + - COUNTER_A_BASE_REG, - I8254_OSC_BASE_2MHZ, - I8254_IO8, 0); + dev->pacer = + comedi_8254_mm_alloc(dev->mmio + COUNTER_B_BASE_REG, + I8254_OSC_BASE_2MHZ, I8254_IO8, 0); + devpriv->counter = + comedi_8254_mm_alloc(dev->mmio + COUNTER_A_BASE_REG, + I8254_OSC_BASE_2MHZ, I8254_IO8, 0); } else { - dev->pacer = comedi_8254_init(dev->iobase + COUNTER_B_BASE_REG, - I8254_OSC_BASE_2MHZ, - I8254_IO8, 0); - devpriv->counter = comedi_8254_init(dev->iobase + - COUNTER_A_BASE_REG, - I8254_OSC_BASE_2MHZ, - I8254_IO8, 0); + dev->pacer = + comedi_8254_io_alloc(dev->iobase + COUNTER_B_BASE_REG, + I8254_OSC_BASE_2MHZ, I8254_IO8, 0); + devpriv->counter = + comedi_8254_io_alloc(dev->iobase + COUNTER_A_BASE_REG, + I8254_OSC_BASE_2MHZ, I8254_IO8, 0); } - if (!dev->pacer || !devpriv->counter) - return -ENOMEM; + if (IS_ERR(dev->pacer)) + return PTR_ERR(dev->pacer); + if (IS_ERR(devpriv->counter)) + return PTR_ERR(devpriv->counter); ret = comedi_alloc_subdevices(dev, 5); if (ret) @@ -1287,9 +1296,9 @@ int labpc_common_attach(struct comedi_device *dev, /* 8255 dio */ s = &dev->subdevices[2]; if (dev->mmio) - ret = subdev_8255_mm_init(dev, s, NULL, DIO_BASE_REG); + ret = subdev_8255_mm_init(dev, s, DIO_BASE_REG); else - ret = subdev_8255_init(dev, s, NULL, DIO_BASE_REG); + ret = subdev_8255_io_init(dev, s, DIO_BASE_REG); if (ret) return ret; @@ -1341,8 +1350,10 @@ void labpc_common_detach(struct comedi_device *dev) { struct labpc_private *devpriv = dev->private; - if (devpriv) - kfree(devpriv->counter); + if (devpriv) { + if (!IS_ERR(devpriv->counter)) + kfree(devpriv->counter); + } } EXPORT_SYMBOL_GPL(labpc_common_detach); diff --git a/drivers/comedi/drivers/ni_mio_common.c b/drivers/comedi/drivers/ni_mio_common.c index d39998565808..980f309d6de7 100644 --- a/drivers/comedi/drivers/ni_mio_common.c +++ b/drivers/comedi/drivers/ni_mio_common.c @@ -46,6 +46,12 @@ #include <linux/comedi/comedi_8255.h> #include "mite.h" +#ifdef PCIDMA +#define IS_PCIMIO 1 +#else +#define IS_PCIMIO 0 +#endif + /* A timeout count */ #define NI_TIMEOUT 1000 @@ -219,54 +225,72 @@ enum timebase_nanoseconds { static const int num_adc_stages_611x = 3; +#ifdef PCIDMA + static void ni_writel(struct comedi_device *dev, unsigned int data, int reg) { - if (dev->mmio) - writel(data, dev->mmio + reg); - else - outl(data, dev->iobase + reg); + writel(data, dev->mmio + reg); } static void ni_writew(struct comedi_device *dev, unsigned int data, int reg) { - if (dev->mmio) - writew(data, dev->mmio + reg); - else - outw(data, dev->iobase + reg); + writew(data, dev->mmio + reg); } static void ni_writeb(struct comedi_device *dev, unsigned int data, int reg) { - if (dev->mmio) - writeb(data, dev->mmio + reg); - else - outb(data, dev->iobase + reg); + writeb(data, dev->mmio + reg); } static unsigned int ni_readl(struct comedi_device *dev, int reg) { - if (dev->mmio) - return readl(dev->mmio + reg); + return readl(dev->mmio + reg); +} + +static unsigned int ni_readw(struct comedi_device *dev, int reg) +{ + return readw(dev->mmio + reg); +} + +static unsigned int ni_readb(struct comedi_device *dev, int reg) +{ + return readb(dev->mmio + reg); +} +#else /* PCIDMA */ + +static void ni_writel(struct comedi_device *dev, unsigned int data, int reg) +{ + outl(data, dev->iobase + reg); +} + +static void ni_writew(struct comedi_device *dev, unsigned int data, int reg) +{ + outw(data, dev->iobase + reg); +} + +static void ni_writeb(struct comedi_device *dev, unsigned int data, int reg) +{ + outb(data, dev->iobase + reg); +} + +static unsigned int ni_readl(struct comedi_device *dev, int reg) +{ return inl(dev->iobase + reg); } static unsigned int ni_readw(struct comedi_device *dev, int reg) { - if (dev->mmio) - return readw(dev->mmio + reg); - return inw(dev->iobase + reg); } static unsigned int ni_readb(struct comedi_device *dev, int reg) { - if (dev->mmio) - return readb(dev->mmio + reg); - return inb(dev->iobase + reg); } +#endif /* PCIDMA */ + /* * We automatically take advantage of STC registers that can be * read/written directly in the I/O space of the board. @@ -5977,6 +6001,12 @@ static int ni_E_init(struct comedi_device *dev, int i; const char *dev_family = devpriv->is_m_series ? "ni_mseries" : "ni_eseries"; + if (!IS_PCIMIO != !dev->mmio) { + dev_err(dev->class_dev, + "%s: bug! %s device not supported.\n", + KBUILD_MODNAME, board->name); + return -ENXIO; + } /* prepare the device for globally-named routes. */ if (ni_assign_device_routes(dev_family, board->name, @@ -6137,8 +6167,8 @@ static int ni_E_init(struct comedi_device *dev, /* 8255 device */ s = &dev->subdevices[NI_8255_DIO_SUBDEV]; if (board->has_8255) { - ret = subdev_8255_init(dev, s, ni_8255_callback, - NI_E_8255_BASE); + ret = subdev_8255_cb_init(dev, s, ni_8255_callback, + NI_E_8255_BASE); if (ret) return ret; } else { diff --git a/drivers/comedi/drivers/pcl711.c b/drivers/comedi/drivers/pcl711.c index 05172c553c8a..0cf3917defe7 100644 --- a/drivers/comedi/drivers/pcl711.c +++ b/drivers/comedi/drivers/pcl711.c @@ -429,10 +429,10 @@ static int pcl711_attach(struct comedi_device *dev, struct comedi_devconfig *it) dev->irq = it->options[1]; } - dev->pacer = comedi_8254_init(dev->iobase + PCL711_TIMER_BASE, - I8254_OSC_BASE_2MHZ, I8254_IO8, 0); - if (!dev->pacer) - return -ENOMEM; + dev->pacer = comedi_8254_io_alloc(dev->iobase + PCL711_TIMER_BASE, + I8254_OSC_BASE_2MHZ, I8254_IO8, 0); + if (IS_ERR(dev->pacer)) + return PTR_ERR(dev->pacer); ret = comedi_alloc_subdevices(dev, 4); if (ret) diff --git a/drivers/comedi/drivers/pcl724.c b/drivers/comedi/drivers/pcl724.c index 948a0576c9ef..00474710b81f 100644 --- a/drivers/comedi/drivers/pcl724.c +++ b/drivers/comedi/drivers/pcl724.c @@ -124,10 +124,10 @@ static int pcl724_attach(struct comedi_device *dev, s = &dev->subdevices[i]; if (board->is_pet48) { iobase = dev->iobase + (i * 0x1000); - ret = subdev_8255_init(dev, s, pcl724_8255mapped_io, - iobase); + ret = subdev_8255_cb_init(dev, s, pcl724_8255mapped_io, + iobase); } else { - ret = subdev_8255_init(dev, s, NULL, i * I8255_SIZE); + ret = subdev_8255_io_init(dev, s, i * I8255_SIZE); } if (ret) return ret; diff --git a/drivers/comedi/drivers/pcl812.c b/drivers/comedi/drivers/pcl812.c index 70dbc129fcf5..0df639c6a595 100644 --- a/drivers/comedi/drivers/pcl812.c +++ b/drivers/comedi/drivers/pcl812.c @@ -1143,11 +1143,11 @@ static int pcl812_attach(struct comedi_device *dev, struct comedi_devconfig *it) return ret; if (board->irq_bits) { - dev->pacer = comedi_8254_init(dev->iobase + PCL812_TIMER_BASE, - I8254_OSC_BASE_2MHZ, - I8254_IO8, 0); - if (!dev->pacer) - return -ENOMEM; + dev->pacer = + comedi_8254_io_alloc(dev->iobase + PCL812_TIMER_BASE, + I8254_OSC_BASE_2MHZ, I8254_IO8, 0); + if (IS_ERR(dev->pacer)) + return PTR_ERR(dev->pacer); if ((1 << it->options[1]) & board->irq_bits) { ret = request_irq(it->options[1], pcl812_interrupt, 0, diff --git a/drivers/comedi/drivers/pcl816.c b/drivers/comedi/drivers/pcl816.c index a5e5320be648..28d1a88c50f6 100644 --- a/drivers/comedi/drivers/pcl816.c +++ b/drivers/comedi/drivers/pcl816.c @@ -615,10 +615,10 @@ static int pcl816_attach(struct comedi_device *dev, struct comedi_devconfig *it) /* an IRQ and DMA are required to support async commands */ pcl816_alloc_irq_and_dma(dev, it); - dev->pacer = comedi_8254_init(dev->iobase + PCL816_TIMER_BASE, - I8254_OSC_BASE_10MHZ, I8254_IO8, 0); - if (!dev->pacer) - return -ENOMEM; + dev->pacer = comedi_8254_io_alloc(dev->iobase + PCL816_TIMER_BASE, + I8254_OSC_BASE_10MHZ, I8254_IO8, 0); + if (IS_ERR(dev->pacer)) + return PTR_ERR(dev->pacer); ret = comedi_alloc_subdevices(dev, 4); if (ret) diff --git a/drivers/comedi/drivers/pcl818.c b/drivers/comedi/drivers/pcl818.c index 29e503de8267..4127adcfb229 100644 --- a/drivers/comedi/drivers/pcl818.c +++ b/drivers/comedi/drivers/pcl818.c @@ -1015,10 +1015,10 @@ static int pcl818_attach(struct comedi_device *dev, struct comedi_devconfig *it) else osc_base = I8254_OSC_BASE_1MHZ; - dev->pacer = comedi_8254_init(dev->iobase + PCL818_TIMER_BASE, - osc_base, I8254_IO8, 0); - if (!dev->pacer) - return -ENOMEM; + dev->pacer = comedi_8254_io_alloc(dev->iobase + PCL818_TIMER_BASE, + osc_base, I8254_IO8, 0); + if (IS_ERR(dev->pacer)) + return PTR_ERR(dev->pacer); /* max sampling speed */ devpriv->ns_min = board->ns_min; diff --git a/drivers/comedi/drivers/pcm3724.c b/drivers/comedi/drivers/pcm3724.c index ca8bef54dacc..fb41de3baef8 100644 --- a/drivers/comedi/drivers/pcm3724.c +++ b/drivers/comedi/drivers/pcm3724.c @@ -204,7 +204,7 @@ static int pcm3724_attach(struct comedi_device *dev, for (i = 0; i < dev->n_subdevices; i++) { s = &dev->subdevices[i]; - ret = subdev_8255_init(dev, s, NULL, i * I8255_SIZE); + ret = subdev_8255_io_init(dev, s, i * I8255_SIZE); if (ret) return ret; s->insn_config = subdev_3724_insn_config; diff --git a/drivers/comedi/drivers/rtd520.c b/drivers/comedi/drivers/rtd520.c index 7e0ec1a2a2ca..44bb0decd7a4 100644 --- a/drivers/comedi/drivers/rtd520.c +++ b/drivers/comedi/drivers/rtd520.c @@ -1289,9 +1289,9 @@ static int rtd_auto_attach(struct comedi_device *dev, /* 8254 Timer/Counter subdevice */ s = &dev->subdevices[3]; - dev->pacer = comedi_8254_mm_init(dev->mmio + LAS0_8254_TIMER_BASE, - RTD_CLOCK_BASE, I8254_IO8, 2); - if (!dev->pacer) + dev->pacer = comedi_8254_mm_alloc(dev->mmio + LAS0_8254_TIMER_BASE, + RTD_CLOCK_BASE, I8254_IO8, 2); + if (IS_ERR(dev->pacer)) return -ENOMEM; comedi_8254_subdevice_init(s, dev->pacer); diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig index 8de9023c2a38..5f869eacd19a 100644 --- a/drivers/extcon/Kconfig +++ b/drivers/extcon/Kconfig @@ -191,4 +191,15 @@ config EXTCON_USBC_TUSB320 Say Y here to enable support for USB Type C cable detection extcon support using a TUSB320. +config EXTCON_RTK_TYPE_C + tristate "Realtek RTD SoC extcon Type-C Driver" + depends on ARCH_REALTEK || COMPILE_TEST + depends on TYPEC + select USB_COMMON + help + Say Y here to enable extcon support for USB Type C cable detection + when using the Realtek RTD SoC USB Type-C port. + The DHC (Digital Home Hub) RTD series SoC contains a type c module. + This driver will detect the status of the type-c port. + endif diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile index 1b390d934ca9..f779adb5e4c7 100644 --- a/drivers/extcon/Makefile +++ b/drivers/extcon/Makefile @@ -25,3 +25,4 @@ obj-$(CONFIG_EXTCON_SM5502) += extcon-sm5502.o obj-$(CONFIG_EXTCON_USB_GPIO) += extcon-usb-gpio.o obj-$(CONFIG_EXTCON_USBC_CROS_EC) += extcon-usbc-cros-ec.o obj-$(CONFIG_EXTCON_USBC_TUSB320) += extcon-usbc-tusb320.o +obj-$(CONFIG_EXTCON_RTK_TYPE_C) += extcon-rtk-type-c.o diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c index 1f1d9ab0c5c7..2c567e0b7b7f 100644 --- a/drivers/extcon/extcon-max77693.c +++ b/drivers/extcon/extcon-max77693.c @@ -1258,9 +1258,16 @@ static int max77693_muic_probe(struct platform_device *pdev) return ret; } +static const struct of_device_id of_max77693_muic_dt_match[] = { + { .compatible = "maxim,max77693-muic", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, of_max77693_muic_dt_match); + static struct platform_driver max77693_muic_driver = { .driver = { .name = DEV_NAME, + .of_match_table = of_max77693_muic_dt_match, }, .probe = max77693_muic_probe, }; diff --git a/drivers/extcon/extcon-max77843.c b/drivers/extcon/extcon-max77843.c index 1bc0426ce3f1..acb11a54f875 100644 --- a/drivers/extcon/extcon-max77843.c +++ b/drivers/extcon/extcon-max77843.c @@ -946,9 +946,16 @@ static const struct platform_device_id max77843_muic_id[] = { }; MODULE_DEVICE_TABLE(platform, max77843_muic_id); +static const struct of_device_id of_max77843_muic_dt_match[] = { + { .compatible = "maxim,max77843-muic", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, of_max77843_muic_dt_match); + static struct platform_driver max77843_muic_driver = { .driver = { .name = "max77843-muic", + .of_match_table = of_max77843_muic_dt_match, }, .probe = max77843_muic_probe, .remove = max77843_muic_remove, diff --git a/drivers/extcon/extcon-rtk-type-c.c b/drivers/extcon/extcon-rtk-type-c.c new file mode 100644 index 000000000000..a592bab77538 --- /dev/null +++ b/drivers/extcon/extcon-rtk-type-c.c @@ -0,0 +1,1794 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * * extcon-rtk-type-c.c - Realtek Extcon Type C driver + * + * Copyright (C) 2023 Realtek Semiconductor Corporation + * + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_gpio.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/syscalls.h> +#include <linux/suspend.h> +#include <linux/debugfs.h> +#include <linux/extcon.h> +#include <linux/extcon-provider.h> +#include <linux/sys_soc.h> +#include <linux/nvmem-consumer.h> +#include <linux/gpio/consumer.h> +#include <linux/usb/otg.h> +#include <linux/usb/typec.h> + +struct cc_param { + u32 rp_4p7k_code; + u32 rp_36k_code; + u32 rp_12k_code; + u32 rd_code; + u32 ra_code; + u32 vref_2p6v; + u32 vref_1p23v; + u32 vref_0p8v; + u32 vref_0p66v; + u32 vref_0p4v; + u32 vref_0p2v; + u32 vref_1_1p6v; + u32 vref_0_1p6v; +}; + +struct type_c_cfg { + int parameter_ver; /* Parameter version */ + int cc_dfp_mode; + struct cc_param cc1_param; + struct cc_param cc2_param; + + u32 debounce_val; + bool use_defalut_parameter; +}; + +struct type_c_data { + void __iomem *reg_base; + struct device *dev; + struct extcon_dev *edev; + + u32 irq; + + /* rd control GPIO only for rtd1295 */ + struct gpio_desc *rd_ctrl_gpio_desc; + + /* Parameters */ + struct type_c_cfg *type_c_cfg; + u32 dfp_mode_rp_en; + u32 ufp_mode_rd_en; + u32 cc1_code; + u32 cc2_code; + u32 cc1_vref; + u32 cc2_vref; + u32 debounce; /* 1b,1us 7f,4.7us */ + + /* type_c state */ + int connect_change; +#define CONNECT_CHANGE 1 +#define CONNECT_NO_CHANGE 0 + int cc_mode; /* cc is host or device */ +#define IN_HOST_MODE 0x10 +#define IN_DEVICE_MODE 0x20 + int is_attach; +#define IN_ATTACH 1 +#define TO_ATTACH 1 +#define IN_DETACH 0 +#define TO_DETACH 0 + int at_cc1; +#define AT_CC1 1 +#define AT_CC2 0 + + u32 int_status; + u32 cc_status; + /* protect the data member */ + spinlock_t lock; + struct delayed_work delayed_work; + + bool rd_en_at_first; + + struct dentry *debug_dir; + + struct typec_port *port; +}; + +/* Type C register offset */ +#define USB_TYPEC_CTRL_CC1_0 0x0 +#define USB_TYPEC_CTRL_CC1_1 0x4 +#define USB_TYPEC_CTRL_CC2_0 0x8 +#define USB_TYPEC_CTRL_CC2_1 0xC +#define USB_TYPEC_STS 0x10 +#define USB_TYPEC_CTRL 0x14 +#define USB_DBUS_PWR_CTRL 0x18 + +#define ENABLE_CC1 0x1 +#define ENABLE_CC2 0x2 +#define DISABLE_CC 0x0 + +/* Bit mapping USB_TYPEC_CTRL_CC1_0 and USB_TYPEC_CTRL_CC2_0 */ +#define PLR_EN BIT(29) +#define CC_SWITCH_MASK (BIT(29) | BIT(28) | BIT(27)) +#define CC_CODE_MASK (0xfffff << 7) +#define rp4pk_code(val) ((0x1f & (val)) << 22) +#define code_rp4pk(val) (((val) >> 22) & 0x1f) +#define rp36k_code(val) ((0x1f & (val)) << 17) +#define code_rp36k(val) (((val) >> 17) & 0x1f) +#define rp12k_code(val) ((0x1f & (val)) << 12) +#define code_rp12k(val) (((val) >> 12) & 0x1f) +#define rd_code(val) ((0x1f & (val)) << 7) +#define code_rd(val) (((val) >> 7) & 0x1f) +#define dfp_mode(val) ((0x3 & (val)) << 5) +#define EN_RP4P7K BIT(4) +#define EN_RP36K BIT(3) +#define EN_RP12K BIT(2) +#define EN_RD BIT(1) +#define EN_CC_DET BIT(0) + +#define CC_MODE_UFP 0x0 +#define CC_MODE_DFP_USB 0x1 +#define CC_MODE_DFP_1_5 0x2 +#define CC_MODE_DFP_3_0 0x3 + +/* + * PARAMETER_V0: + * Realtek Kylin rtd1295 + * Realtek Hercules rtd1395 + * Realtek Thor rtd1619 + * Realtek Hank rtd1319 + * Realtek Groot rtd1312c + * PARAMETER_V1: + * Realtek Stark rtd1619b + * Realtek Parker rtd1319d + * Realtek Danvers rtd1315e + */ +enum parameter_version { + PARAMETER_V0 = 0, + PARAMETER_V1 = 1, +}; + +/* Bit mapping USB_TYPEC_CTRL_CC1_1 and USB_TYPEC_CTRL_CC2_1 */ +#define V0_vref_2p6v(val) ((0xf & (val)) << 26) /* Bit 29 for groot */ +#define V0_vref_1p23v(val) ((0xf & (val)) << 22) +#define V0_vref_0p8v(val) ((0xf & (val)) << 18) +#define V0_vref_0p66v(val) ((0xf & (val)) << 14) +#define V0_vref_0p4v(val) ((0x7 & (val)) << 11) +#define V0_vref_0p2v(val) ((0x7 & (val)) << 8) +#define V0_vref_1_1p6v(val) ((0xf & (val)) << 4) +#define V0_vref_0_1p6v(val) ((0xf & (val)) << 0) + +#define V0_decode_2p6v(val) (((val) >> 26) & 0xf) /* Bit 29 for groot */ +#define V0_decode_1p23v(val) (((val) >> 22) & 0xf) +#define V0_decode_0p8v(val) (((val) >> 18) & 0xf) +#define V0_decode_0p66v(val) (((val) >> 14) & 0xf) +#define V0_decode_0p4v(val) (((val) >> 11) & 0x7) +#define V0_decode_0p2v(val) (((val) >> 8) & 0x7) +#define V0_decode_1_1p6v(val) (((val) >> 4) & 0xf) +#define V0_decode_0_1p6v(val) (((val) >> 0) & 0xf) + +/* new Bit mapping USB_TYPEC_CTRL_CC1_1 and USB_TYPEC_CTRL_CC2_1 */ +#define V1_vref_2p6v(val) ((0xf & (val)) << 28) +#define V1_vref_1p23v(val) ((0xf & (val)) << 24) +#define V1_vref_0p8v(val) ((0xf & (val)) << 20) +#define V1_vref_0p66v(val) ((0xf & (val)) << 16) +#define V1_vref_0p4v(val) ((0xf & (val)) << 12) +#define V1_vref_0p2v(val) ((0xf & (val)) << 8) +#define V1_vref_1_1p6v(val) ((0xf & (val)) << 4) +#define V1_vref_0_1p6v(val) ((0xf & (val)) << 0) + +#define V1_decode_2p6v(val) (((val) >> 28) & 0xf) +#define V1_decode_1p23v(val) (((val) >> 24) & 0xf) +#define V1_decode_0p8v(val) (((val) >> 20) & 0xf) +#define V1_decode_0p66v(val) (((val) >> 16) & 0xf) +#define V1_decode_0p4v(val) (((val) >> 12) & 0xf) +#define V1_decode_0p2v(val) (((val) >> 8) & 0xf) +#define V1_decode_1_1p6v(val) (((val) >> 4) & 0xf) +#define V1_decode_0_1p6v(val) (((val) >> 0) & 0xf) + +/* Bit mapping USB_TYPEC_STS */ +#define DET_STS 0x7 +#define CC1_DET_STS (DET_STS) +#define CC2_DET_STS (DET_STS << 3) +#define DET_STS_RA 0x1 +#define DET_STS_RD 0x3 +#define DET_STS_RP 0x1 +#define CC1_DET_STS_RA (DET_STS_RA) +#define CC1_DET_STS_RD (DET_STS_RD) +#define CC1_DET_STS_RP (DET_STS_RP) +#define CC2_DET_STS_RA (DET_STS_RA << 3) +#define CC2_DET_STS_RD (DET_STS_RD << 3) +#define CC2_DET_STS_RP (DET_STS_RP << 3) + +/* Bit mapping USB_TYPEC_CTRL */ +#define CC2_INT_EN BIT(11) +#define CC1_INT_EN BIT(10) +#define CC2_INT_STS BIT(9) +#define CC1_INT_STS BIT(8) +#define DEBOUNCE_TIME_MASK 0xff +#define DEBOUNCE_EN BIT(0) +#define ENABLE_TYPE_C_DETECT (CC1_INT_EN | CC2_INT_EN) +#define ALL_CC_INT_STS (CC1_INT_STS | CC2_INT_STS) + +/* Parameter */ +#define DETECT_TIME 50 /* ms */ + +static const unsigned int usb_type_c_cable[] = { + EXTCON_USB, + EXTCON_USB_HOST, + EXTCON_NONE, +}; + +enum usb_data_roles { + DR_NONE, + DR_HOST, + DR_DEVICE, +}; + +static const struct soc_device_attribute rtk_soc_kylin[] = { + { .family = "Realtek Kylin", }, + { /* empty */ } +}; + +static int rtd129x_switch_type_c_plug_config(struct type_c_data *type_c, + int dr_mode, int cc) +{ + void __iomem *reg = type_c->reg_base + USB_TYPEC_CTRL_CC1_0; + int val_cc; + +#define TYPE_C_EN_SWITCH BIT(29) +#define TYPE_C_TXRX_SEL (BIT(28) | BIT(27)) +#define TYPE_C_SWITCH_MASK (TYPE_C_EN_SWITCH | TYPE_C_TXRX_SEL) +#define TYPE_C_ENABLE_CC1 TYPE_C_EN_SWITCH +#define TYPE_C_ENABLE_CC2 (TYPE_C_EN_SWITCH | TYPE_C_TXRX_SEL) +#define TYPE_C_DISABLE_CC ~TYPE_C_SWITCH_MASK + + val_cc = readl(reg); + val_cc &= ~TYPE_C_SWITCH_MASK; + + if (cc == DISABLE_CC) { + val_cc &= TYPE_C_DISABLE_CC; + } else if (cc == ENABLE_CC1) { + val_cc |= TYPE_C_ENABLE_CC1; + } else if (cc == ENABLE_CC2) { + val_cc |= TYPE_C_ENABLE_CC2; + } else { + dev_err(type_c->dev, "%s: Error cc setting cc=0x%x\n", __func__, cc); + return -EINVAL; + } + writel(val_cc, reg); + + /* waiting cc stable for enable/disable */ + mdelay(1); + + dev_dbg(type_c->dev, "%s: cc=0x%x val_cc=0x%x usb_typec_ctrl_cc1_0=0x%x\n", + __func__, cc, val_cc, readl(reg)); + + return 0; +} + +static inline void switch_type_c_plug_config(struct type_c_data *type_c, + int dr_mode, int cc) +{ + int ret = 0; + + if (soc_device_match(rtk_soc_kylin)) + ret = rtd129x_switch_type_c_plug_config(type_c, dr_mode, cc); + + if (ret < 0) + dev_err(type_c->dev, "%s: Error set type c plug config\n", + __func__); +} + +static void switch_type_c_dr_mode(struct type_c_data *type_c, int dr_mode, int cc) +{ + bool is_host = false; + bool is_device = false; + bool polarity = false; + bool vbus = false; + bool ss = true; + + switch_type_c_plug_config(type_c, dr_mode, cc); + if (cc == ENABLE_CC2) + polarity = true; + + switch (dr_mode) { + case USB_DR_MODE_HOST: + is_host = true; + break; + case USB_DR_MODE_PERIPHERAL: + is_device = true; + vbus = true; + break; + default: + dev_dbg(type_c->dev, "%s dr_mode=%d ==> no host or device\n", + __func__, dr_mode); + break; + } + + dev_dbg(type_c->dev, "%s is_host=%d is_device=%d vbus=%d polarity=%d\n", + __func__, is_host, is_device, vbus, polarity); + + /* for EXTCON_USB device mode */ + extcon_set_state(type_c->edev, EXTCON_USB, is_device); + extcon_set_property(type_c->edev, EXTCON_USB, + EXTCON_PROP_USB_VBUS, + (union extcon_property_value)(int)vbus); + extcon_set_property(type_c->edev, EXTCON_USB, + EXTCON_PROP_USB_TYPEC_POLARITY, + (union extcon_property_value)(int)polarity); + extcon_set_property(type_c->edev, EXTCON_USB, + EXTCON_PROP_USB_SS, + (union extcon_property_value)(int)ss); + + /* for EXTCON_USB_HOST host mode */ + extcon_set_state(type_c->edev, EXTCON_USB_HOST, is_host); + extcon_set_property(type_c->edev, EXTCON_USB_HOST, + EXTCON_PROP_USB_VBUS, + (union extcon_property_value)(int)vbus); + extcon_set_property(type_c->edev, EXTCON_USB_HOST, + EXTCON_PROP_USB_TYPEC_POLARITY, + (union extcon_property_value)(int)polarity); + extcon_set_property(type_c->edev, EXTCON_USB_HOST, + EXTCON_PROP_USB_SS, + (union extcon_property_value)(int)ss); + + /* sync EXTCON_USB and EXTCON_USB_HOST */ + extcon_sync(type_c->edev, EXTCON_USB); + extcon_sync(type_c->edev, EXTCON_USB_HOST); + + if (type_c->port) { + switch (dr_mode) { + case USB_DR_MODE_HOST: + typec_set_data_role(type_c->port, TYPEC_HOST); + typec_set_pwr_role(type_c->port, TYPEC_SOURCE); + break; + case USB_DR_MODE_PERIPHERAL: + typec_set_data_role(type_c->port, TYPEC_DEVICE); + typec_set_pwr_role(type_c->port, TYPEC_SINK); + break; + default: + dev_dbg(type_c->dev, "%s unknown dr_mode=%d\n", + __func__, dr_mode); + break; + } + } +} + +/* connector attached/detached */ +static int connector_attached(struct type_c_data *type_c, u32 cc, int dr_mode) +{ + void __iomem *reg = type_c->reg_base + USB_TYPEC_CTRL; + + cancel_delayed_work(&type_c->delayed_work); + + switch_type_c_dr_mode(type_c, dr_mode, cc); + + writel(ENABLE_TYPE_C_DETECT | readl(reg), reg); + + return 0; +} + +static int connector_detached(struct type_c_data *type_c, u32 cc, int dr_mode) +{ + void __iomem *reg = type_c->reg_base + USB_TYPEC_CTRL; + + writel(~ENABLE_TYPE_C_DETECT & readl(reg), reg); + + switch_type_c_dr_mode(type_c, 0, cc); + + schedule_delayed_work(&type_c->delayed_work, msecs_to_jiffies(DETECT_TIME)); + + return 0; +} + +/* detect host device switch */ +static int __detect_host_device(struct type_c_data *type_c, u32 rp_or_rd_en) +{ + struct device *dev = type_c->dev; + void __iomem *reg_base = type_c->reg_base; + u32 cc1_config, cc2_config, default_ctrl; + u32 cc1_switch = 0; + + default_ctrl = readl(reg_base + USB_TYPEC_CTRL) & DEBOUNCE_TIME_MASK; + writel(default_ctrl, reg_base + USB_TYPEC_CTRL); + + cc1_config = readl(reg_base + USB_TYPEC_CTRL_CC1_0); + cc2_config = readl(reg_base + USB_TYPEC_CTRL_CC2_0); + + cc1_config &= ~EN_CC_DET; + cc2_config &= ~EN_CC_DET; + writel(cc1_config, reg_base + USB_TYPEC_CTRL_CC1_0); + writel(cc2_config, reg_base + USB_TYPEC_CTRL_CC2_0); + + if (soc_device_match(rtk_soc_kylin)) + cc1_switch = cc1_config & CC_SWITCH_MASK; + + cc1_config &= CC_CODE_MASK; + cc1_config |= rp_or_rd_en | cc1_switch; + cc2_config &= CC_CODE_MASK; + cc2_config |= rp_or_rd_en; + writel(cc2_config, reg_base + USB_TYPEC_CTRL_CC2_0); + writel(cc1_config, reg_base + USB_TYPEC_CTRL_CC1_0); + + /* For kylin to disable external rd control gpio */ + if (soc_device_match(rtk_soc_kylin)) { + struct gpio_desc *gpio = type_c->rd_ctrl_gpio_desc; + + if (gpio && gpiod_direction_output(gpio, 1)) + dev_err(dev, "%s ERROR set rd_ctrl_gpio_desc fail\n", __func__); + } + + cc1_config |= EN_CC_DET; + cc2_config |= EN_CC_DET; + writel(cc1_config, reg_base + USB_TYPEC_CTRL_CC1_0); + writel(cc2_config, reg_base + USB_TYPEC_CTRL_CC2_0); + + return 0; +} + +static int detect_device(struct type_c_data *type_c) +{ + return __detect_host_device(type_c, type_c->dfp_mode_rp_en); +} + +static int detect_host(struct type_c_data *type_c) +{ + return __detect_host_device(type_c, type_c->ufp_mode_rd_en); +} + +static int host_device_switch_detection(struct type_c_data *type_c) +{ + if (type_c->cc_mode == IN_HOST_MODE) { + type_c->cc_mode = IN_DEVICE_MODE; + detect_host(type_c); + } else { + type_c->cc_mode = IN_HOST_MODE; + detect_device(type_c); + } + + return 0; +} + +static int detect_type_c_state(struct type_c_data *type_c) +{ + struct device *dev = type_c->dev; + void __iomem *reg_base = type_c->reg_base; + u32 int_status, cc_status, cc_status_check; + unsigned long flags; + + spin_lock_irqsave(&type_c->lock, flags); + + int_status = readl(reg_base + USB_TYPEC_CTRL); + cc_status = readl(reg_base + USB_TYPEC_STS); + + type_c->connect_change = CONNECT_NO_CHANGE; + + switch (type_c->cc_mode | type_c->is_attach) { + case IN_HOST_MODE | IN_ATTACH: + if (((cc_status & CC1_DET_STS) == CC1_DET_STS) && type_c->at_cc1 == AT_CC1) { + dev_dbg(dev, "IN host mode and cc1 device detach (cc_status=0x%x)", + cc_status); + type_c->is_attach = TO_DETACH; + type_c->connect_change = CONNECT_CHANGE; + } else if (((cc_status & CC2_DET_STS) == CC2_DET_STS) && + type_c->at_cc1 == AT_CC2) { + dev_dbg(dev, "IN host mode and cc2 device detach (cc_status=0x%x)", + cc_status); + type_c->is_attach = TO_DETACH; + type_c->connect_change = CONNECT_CHANGE; + } + break; + case IN_HOST_MODE | IN_DETACH: + cc_status_check = readl(reg_base + USB_TYPEC_STS); + if (cc_status_check != (CC1_DET_STS | CC2_DET_STS)) { + if (in_interrupt()) { + /* Add delay time to avoid capacitive effect of cable. */ + mdelay(300); + } else { + spin_unlock_irqrestore(&type_c->lock, flags); + /* Add delay time to avoid capacitive effect of cable. */ + msleep(300); + spin_lock_irqsave(&type_c->lock, flags); + } + cc_status_check = readl(reg_base + USB_TYPEC_STS); + } + if (cc_status != cc_status_check) { + dev_warn(dev, "IN_HOST_MODE: cc_status (0x%x) != cc_status_check (0x%x)\n", + cc_status, cc_status_check); + cc_status = readl(reg_base + USB_TYPEC_STS); + } + + if ((cc_status & CC1_DET_STS) == CC1_DET_STS_RD) { + dev_dbg(dev, "IN host mode and cc1 device attach (cc_status=0x%x)", + cc_status); + type_c->is_attach = TO_ATTACH; + type_c->at_cc1 = AT_CC1; + type_c->connect_change = CONNECT_CHANGE; + } else if ((cc_status & CC2_DET_STS) == CC2_DET_STS_RD) { + dev_dbg(dev, "In host mode and cc2 device attach (cc_status=0x%x)", + cc_status); + type_c->is_attach = TO_ATTACH; + type_c->at_cc1 = AT_CC2; + type_c->connect_change = CONNECT_CHANGE; + } + break; + case IN_DEVICE_MODE | IN_ATTACH: + if ((cc_status & CC1_DET_STS) < CC1_DET_STS_RP || + (cc_status & CC2_DET_STS) < CC2_DET_STS_RP) { + /* Add a sw debounce to filter cc signal sent from apple pd adapter */ + mdelay(5); + cc_status_check = readl(reg_base + USB_TYPEC_STS); + + if (cc_status != cc_status_check) { + dev_dbg(dev, "IN_DEVICE_MODE: cc_status (0x%x) != cc_status_check (0x%x) maybe use a pd adapter\n", + cc_status, cc_status_check); + cc_status = cc_status_check; + } + } + + if ((cc_status & CC1_DET_STS) < CC1_DET_STS_RP && type_c->at_cc1 == AT_CC1) { + dev_dbg(dev, "IN device mode and cc1 host disconnect (cc_status=0x%x)", + cc_status); + type_c->is_attach = TO_DETACH; + type_c->connect_change = CONNECT_CHANGE; + } else if ((cc_status & CC2_DET_STS) < CC2_DET_STS_RP && + type_c->at_cc1 == AT_CC2) { + dev_dbg(dev, "IN device mode and cc2 host disconnect (cc_status=0x%x)", + cc_status); + type_c->is_attach = TO_DETACH; + type_c->connect_change = CONNECT_CHANGE; + } + break; + case IN_DEVICE_MODE | IN_DETACH: + cc_status_check = readl(reg_base + USB_TYPEC_STS); + if (cc_status_check != 0x0) { + if (in_interrupt()) { + /* Add delay time to avoid capacitive effect of cable. */ + mdelay(300); + } else { + spin_unlock_irqrestore(&type_c->lock, flags); + /* Add delay time to avoid capacitive effect of cable. */ + msleep(300); + spin_lock_irqsave(&type_c->lock, flags); + } + cc_status_check = readl(reg_base + USB_TYPEC_STS); + } + + if (cc_status != cc_status_check) { + dev_warn(dev, "IN_DEVICE_MODE: cc_status (0x%x) != cc_status_check (0x%x)\n", + cc_status, cc_status_check); + cc_status = readl(reg_base + USB_TYPEC_STS); + } + + if ((cc_status & CC1_DET_STS) >= CC1_DET_STS_RP) { + dev_dbg(dev, "IN device mode and cc1 host connect (cc_status=0x%x)", + cc_status); + type_c->at_cc1 = AT_CC1; + type_c->is_attach = TO_ATTACH; + type_c->connect_change = CONNECT_CHANGE; + } else if ((cc_status & CC2_DET_STS) >= CC2_DET_STS_RP) { + dev_dbg(dev, "IN device mode and cc2 host connect (cc_status=0x%x)", + cc_status); + type_c->at_cc1 = AT_CC2; + type_c->is_attach = TO_ATTACH; + type_c->connect_change = CONNECT_CHANGE; + } + break; + default: + dev_err(dev, "error host or device mode (cc_mode=%d, is_attach=%d) ", + type_c->cc_mode, type_c->is_attach); + } + + type_c->int_status = int_status; + type_c->cc_status = cc_status; + + spin_unlock_irqrestore(&type_c->lock, flags); + return 0; +} + +static void host_device_switch(struct work_struct *work) +{ + struct type_c_data *type_c = container_of(work, struct type_c_data, + delayed_work.work); + struct device *dev = type_c->dev; + unsigned long flags; + int connect_change = 0; + int cc_mode = 0; + int is_attach = 0; + int at_cc1 = 0; + + spin_lock_irqsave(&type_c->lock, flags); + if (type_c->connect_change) + connect_change = type_c->connect_change; + spin_unlock_irqrestore(&type_c->lock, flags); + + if (!connect_change) + detect_type_c_state(type_c); + + spin_lock_irqsave(&type_c->lock, flags); + if (type_c->connect_change) { + connect_change = type_c->connect_change; + cc_mode = type_c->cc_mode; + is_attach = type_c->is_attach; + at_cc1 = type_c->at_cc1; + type_c->connect_change = CONNECT_NO_CHANGE; + } else { + host_device_switch_detection(type_c); + + schedule_delayed_work(&type_c->delayed_work, msecs_to_jiffies(DETECT_TIME)); + } + spin_unlock_irqrestore(&type_c->lock, flags); + + if (!connect_change) + return; + + dev_dbg(dev, "%s: usb cable connection change\n", __func__); + if (cc_mode == IN_HOST_MODE) { + if (is_attach && at_cc1) + connector_attached(type_c, ENABLE_CC1, USB_DR_MODE_HOST); + else if (is_attach && !at_cc1) + connector_attached(type_c, ENABLE_CC2, USB_DR_MODE_HOST); + else + connector_detached(type_c, DISABLE_CC, USB_DR_MODE_HOST); + } else if (cc_mode == IN_DEVICE_MODE) { + if (is_attach && at_cc1) + connector_attached(type_c, ENABLE_CC1, USB_DR_MODE_PERIPHERAL); + else if (is_attach && !at_cc1) + connector_attached(type_c, ENABLE_CC2, USB_DR_MODE_PERIPHERAL); + else + connector_detached(type_c, DISABLE_CC, USB_DR_MODE_PERIPHERAL); + } else { + dev_err(dev, "Error: IN unknown mode %d to %s at %s (cc_status=0x%x)\n", + cc_mode, is_attach ? "attach" : "detach", + at_cc1 ? "cc1" : "cc2", type_c->cc_status); + } + dev_info(dev, "Connection change OK: IN %s mode to %s at %s (cc_status=0x%x)\n", + cc_mode == IN_HOST_MODE ? "host" : "device", + is_attach ? "attach" : "detach", + at_cc1 ? "cc1" : "cc2", type_c->cc_status); +} + +static irqreturn_t type_c_detect_irq(int irq, void *__data) +{ + struct type_c_data *type_c = (struct type_c_data *)__data; + struct device *dev = type_c->dev; + void __iomem *reg = type_c->reg_base + USB_TYPEC_CTRL; + unsigned long flags; + + detect_type_c_state(type_c); + + spin_lock_irqsave(&type_c->lock, flags); + + if (type_c->connect_change) { + dev_dbg(dev, "%s: IN %s mode to %s (at %s interrupt) int_status=0x%x, cc_status=0x%x", + __func__, + type_c->cc_mode == IN_HOST_MODE ? "host" : "device", + type_c->is_attach ? "attach" : "detach", + type_c->at_cc1 ? "cc1" : "cc2", + type_c->int_status, type_c->cc_status); + + /* clear interrupt status */ + writel(~ALL_CC_INT_STS & readl(reg), reg); + + cancel_delayed_work(&type_c->delayed_work); + schedule_delayed_work(&type_c->delayed_work, msecs_to_jiffies(0)); + } else { + static int local_count; + + /* if no connect_change, we keep the status to avoid status lose */ + if (local_count++ > 10) { + /* clear interrupt status */ + writel(~ALL_CC_INT_STS & readl(reg), reg); + local_count = 0; + } + } + + spin_unlock_irqrestore(&type_c->lock, flags); + + return IRQ_HANDLED; +} + +static int type_c_port_dr_set(struct typec_port *port, + enum typec_data_role role) +{ + struct type_c_data *type_c = typec_get_drvdata(port); + u32 enable_cc; + unsigned long flags; + + spin_lock_irqsave(&type_c->lock, flags); + enable_cc = type_c->at_cc1 ? ENABLE_CC1 : ENABLE_CC2; + spin_unlock_irqrestore(&type_c->lock, flags); + + if (role == TYPEC_HOST) + switch_type_c_dr_mode(type_c, USB_DR_MODE_HOST, enable_cc); + else if (role == TYPEC_DEVICE) + switch_type_c_dr_mode(type_c, USB_DR_MODE_PERIPHERAL, enable_cc); + else + switch_type_c_dr_mode(type_c, 0, DISABLE_CC); + + return 0; +} + +static const struct typec_operations type_c_port_ops = { + .dr_set = type_c_port_dr_set, +}; + +#ifdef CONFIG_DEBUG_FS +static int type_c_parameter_show(struct seq_file *s, void *unused) +{ + struct type_c_data *type_c = s->private; + struct type_c_cfg *type_c_cfg = type_c->type_c_cfg; + struct cc_param *cc_param; + unsigned long flags; + + spin_lock_irqsave(&type_c->lock, flags); + + seq_printf(s, "cc_dfp_mode %s\n", + ({ char *tmp; + switch (type_c_cfg->cc_dfp_mode) { + case CC_MODE_DFP_USB: + tmp = "CC_MODE_DFP_USB"; break; + case CC_MODE_DFP_1_5: + tmp = "CC_MODE_DFP_1_5"; break; + case CC_MODE_DFP_3_0: + tmp = "CC_MODE_DFP_3_0"; break; + default: + tmp = "?"; break; + } tmp; })); + + seq_printf(s, "dfp_mode_rp_en 0x%x\n", type_c->dfp_mode_rp_en); + seq_printf(s, "ufp_mode_rd_en 0x%x\n", type_c->ufp_mode_rd_en); + seq_printf(s, "cc1_code 0x%x\n", type_c->cc1_code); + seq_printf(s, "cc2_code 0x%x\n", type_c->cc2_code); + seq_printf(s, "cc1_vref 0x%x\n", type_c->cc1_vref); + seq_printf(s, "cc2_vref 0x%x\n", type_c->cc2_vref); + seq_printf(s, "debounce 0x%x\n", type_c->debounce); + seq_puts(s, "\n"); + + cc_param = &type_c_cfg->cc1_param; + seq_puts(s, "cc1_param:\n"); + seq_printf(s, " rp_4p7k_code 0x%x\n", cc_param->rp_4p7k_code); + seq_printf(s, " rp_36k_code 0x%x\n", cc_param->rp_36k_code); + seq_printf(s, " rp_12k_code 0x%x\n", cc_param->rp_12k_code); + seq_printf(s, " rd_code 0x%x\n", cc_param->rd_code); + seq_printf(s, " vref_2p6v 0x%x\n", cc_param->vref_2p6v); + seq_printf(s, " vref_1p23v 0x%x\n", cc_param->vref_1p23v); + seq_printf(s, " vref_0p8v 0x%x\n", cc_param->vref_0p8v); + seq_printf(s, " vref_0p66v 0x%x\n", cc_param->vref_0p66v); + seq_printf(s, " vref_0p4v 0x%x\n", cc_param->vref_0p4v); + seq_printf(s, " vref_0p2v 0x%x\n", cc_param->vref_0p2v); + seq_printf(s, " vref_1_1p6v 0x%x\n", cc_param->vref_1_1p6v); + seq_printf(s, " vref_0_1p6v 0x%x\n", cc_param->vref_0_1p6v); + + cc_param = &type_c_cfg->cc2_param; + seq_puts(s, "cc2_param:\n"); + seq_printf(s, " rp_4p7k_code 0x%x\n", cc_param->rp_4p7k_code); + seq_printf(s, " rp_36k_code 0x%x\n", cc_param->rp_36k_code); + seq_printf(s, " rp_12k_code 0x%x\n", cc_param->rp_12k_code); + seq_printf(s, " rd_code 0x%x\n", cc_param->rd_code); + seq_printf(s, " vref_2p6v 0x%x\n", cc_param->vref_2p6v); + seq_printf(s, " vref_1p23v 0x%x\n", cc_param->vref_1p23v); + seq_printf(s, " vref_0p8v 0x%x\n", cc_param->vref_0p8v); + seq_printf(s, " vref_0p66v 0x%x\n", cc_param->vref_0p66v); + seq_printf(s, " vref_0p4v 0x%x\n", cc_param->vref_0p4v); + seq_printf(s, " vref_0p2v 0x%x\n", cc_param->vref_0p2v); + seq_printf(s, " vref_1_1p6v 0x%x\n", cc_param->vref_1_1p6v); + seq_printf(s, " vref_0_1p6v 0x%x\n", cc_param->vref_0_1p6v); + + spin_unlock_irqrestore(&type_c->lock, flags); + + return 0; +} + +static int type_c_parameter_open(struct inode *inode, struct file *file) +{ + return single_open(file, type_c_parameter_show, inode->i_private); +} + +static const struct file_operations type_c_parameter_fops = { + .open = type_c_parameter_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int type_c_status_show(struct seq_file *s, void *unused) +{ + struct type_c_data *type_c = s->private; + unsigned long flags; + + spin_lock_irqsave(&type_c->lock, flags); + + seq_printf(s, "In %s mode %s at %s (cc_status=0x%x)\n", + type_c->cc_mode == IN_HOST_MODE ? "host" : "device", + type_c->is_attach ? "attach" : "detach", + type_c->at_cc1 ? "cc1" : "cc2", type_c->cc_status); + + seq_printf(s, "Read Register (type_c_ctrl_cc1_0=0x%x)\n", + readl(type_c->reg_base + 0x0)); + seq_printf(s, "Read Register (type_c_ctrl_cc1_1=0x%x)\n", + readl(type_c->reg_base + 0x4)); + seq_printf(s, "Read Register (type_c_ctrl_cc2_0=0x%x)\n", + readl(type_c->reg_base + 0x8)); + seq_printf(s, "Read Register (type_c_ctrl_cc2_1=0x%x)\n", + readl(type_c->reg_base + 0xc)); + seq_printf(s, "Read Register (type_c_status=0x%x)\n", + readl(type_c->reg_base + 0x10)); + seq_printf(s, "Read Register (type_c_ctrl=0x%x)\n", + readl(type_c->reg_base + 0x14)); + + spin_unlock_irqrestore(&type_c->lock, flags); + + return 0; +} + +static int type_c_status_open(struct inode *inode, struct file *file) +{ + return single_open(file, type_c_status_show, inode->i_private); +} + +static const struct file_operations type_c_status_fops = { + .open = type_c_status_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static inline void create_debug_files(struct type_c_data *type_c) +{ + type_c->debug_dir = debugfs_create_dir("type_c", usb_debug_root); + + debugfs_create_file("parameter", 0444, type_c->debug_dir, type_c, + &type_c_parameter_fops); + + debugfs_create_file("status", 0444, type_c->debug_dir, type_c, + &type_c_status_fops); +} + +static inline void remove_debug_files(struct type_c_data *type_c) +{ + debugfs_remove_recursive(type_c->debug_dir); +} +#else +static inline void create_debug_files(struct type_c_data *type_c) { } +static inline void remove_debug_files(struct type_c_data *type_c) { } +#endif /* CONFIG_DEBUG_FS */ + +/* Init and probe */ + +static inline s8 get_value(s8 value) +{ + return (((s8)value & 0x8) ? (-(s8)(0x7 & value)) : ((s8)(value))); +} + +static int __updated_type_c_parameter_by_efuse(struct type_c_data *type_c) +{ + struct type_c_cfg *type_c_cfg = type_c->type_c_cfg; + struct cc_param *cc_param; + struct nvmem_cell *cell; + s8 cc1_4p7k = 0; + s8 cc1_12k = 0; + s8 cc1_0p2v = 0; + s8 cc1_0p8v = 0; + s8 cc1_2p6v = 0; + s8 cc1_0p66v = 0; + s8 cc1_1p23v = 0; + s8 cc2_4p7k = 0; + s8 cc2_12k = 0; + s8 cc2_0p2v = 0; + s8 cc2_0p8v = 0; + s8 cc2_2p6v = 0; + s8 cc2_0p66v = 0; + s8 cc2_1p23v = 0; + + cell = nvmem_cell_get(type_c->dev, "usb-cal"); + if (IS_ERR(cell)) { + dev_warn(type_c->dev, "%s failed to get usb-cal: %ld\n", + __func__, PTR_ERR(cell)); + } else { + unsigned char *buf; + size_t buf_size; + int value_size = 4; + int value_mask = (BIT(value_size) - 1); + + buf = nvmem_cell_read(cell, &buf_size); + if (!IS_ERR(buf)) { + cc1_0p2v = get_value((buf[0] >> value_size * 0) & value_mask); + cc1_0p8v = get_value((buf[0] >> value_size * 1) & value_mask); + cc1_2p6v = get_value((buf[1] >> value_size * 0) & value_mask); + cc1_0p66v = get_value((buf[1] >> value_size * 1) & value_mask); + cc1_1p23v = get_value((buf[2] >> value_size * 0) & value_mask); + + cc2_0p2v = get_value((buf[3] >> value_size * 0) & value_mask); + cc2_0p8v = get_value((buf[3] >> value_size * 1) & value_mask); + cc2_2p6v = get_value((buf[4] >> value_size * 0) & value_mask); + cc2_0p66v = get_value((buf[4] >> value_size * 1) & value_mask); + cc2_1p23v = get_value((buf[5] >> value_size * 0) & value_mask); + + cc1_4p7k = get_value((buf[6] >> value_size * 0) & value_mask); + cc1_12k = get_value((buf[6] >> value_size * 1) & value_mask); + cc2_4p7k = get_value((buf[7] >> value_size * 0) & value_mask); + cc2_12k = get_value((buf[7] >> value_size * 1) & value_mask); + + kfree(buf); + } + nvmem_cell_put(cell); + } + + dev_dbg(type_c->dev, "check efuse cc1_4p7k=%d cc1_12k=%d cc2_4p7k=%d cc2_12k=%d\n", + cc1_4p7k, cc1_12k, cc2_4p7k, cc2_12k); + dev_dbg(type_c->dev, "check efuse cc1_0p2v=%d cc1_0p8v=%d cc1_2p6v=%d cc1_0p66v=%d cc1_1p23v=%d\n", + cc1_0p2v, cc1_0p8v, cc1_2p6v, cc1_0p66v, cc1_1p23v); + dev_dbg(type_c->dev, "check efuse cc2_0p2v=%d cc2_0p8v=%d cc2_2p6v=%d cc2_0p66v=%d cc2_1p23v=%d\n", + cc2_0p2v, cc2_0p8v, cc2_2p6v, cc2_0p66v, cc2_1p23v); + + cc_param = &type_c_cfg->cc1_param; + cc_param->rp_4p7k_code = cc_param->rp_4p7k_code + cc1_4p7k; + cc_param->rp_12k_code = cc_param->rp_12k_code + cc1_12k; + + cc_param->vref_1p23v = cc_param->vref_1p23v + cc1_1p23v; + cc_param->vref_0p66v = cc_param->vref_0p66v + cc1_0p66v; + cc_param->vref_2p6v = cc_param->vref_2p6v + cc1_2p6v; + cc_param->vref_0p8v = cc_param->vref_0p8v + cc1_0p8v; + cc_param->vref_0p2v = cc_param->vref_0p2v + cc1_0p2v; + + cc_param = &type_c_cfg->cc2_param; + cc_param->rp_4p7k_code = cc_param->rp_4p7k_code + cc2_4p7k; + cc_param->rp_12k_code = cc_param->rp_12k_code + cc2_12k; + + cc_param->vref_1p23v = cc_param->vref_1p23v + cc2_1p23v; + cc_param->vref_0p66v = cc_param->vref_0p66v + cc2_0p66v; + cc_param->vref_2p6v = cc_param->vref_2p6v + cc2_2p6v; + cc_param->vref_0p8v = cc_param->vref_0p8v + cc2_0p8v; + cc_param->vref_0p2v = cc_param->vref_0p2v + cc2_0p2v; + + return 0; +} + +static int __updated_type_c_parameter_by_efuse_v2(struct type_c_data *type_c) +{ + struct type_c_cfg *type_c_cfg = type_c->type_c_cfg; + struct cc_param *cc_param; + struct nvmem_cell *cell; + s8 cc1_4p7k = 0; + s8 cc1_12k = 0; + s8 cc1_0p2v = 0; + s8 cc1_0p8v = 0; + s8 cc1_2p6v = 0; + s8 cc1_0p66v = 0; + s8 cc1_1p23v = 0; + s8 cc2_4p7k = 0; + s8 cc2_12k = 0; + s8 cc2_0p2v = 0; + s8 cc2_0p8v = 0; + s8 cc2_2p6v = 0; + s8 cc2_0p66v = 0; + s8 cc2_1p23v = 0; + + cell = nvmem_cell_get(type_c->dev, "usb-type-c-cal"); + if (IS_ERR(cell)) { + dev_warn(type_c->dev, "%s failed to get usb-type-c-cal: %ld\n", + __func__, PTR_ERR(cell)); + } else { + unsigned char *buf; + size_t buf_size; + int value_size = 0; + int value_mask = (BIT(value_size) - 1); + + buf = nvmem_cell_read(cell, &buf_size); + if (!IS_ERR(buf)) { + value_size = 5; + value_mask = (BIT(value_size) - 1); + cc1_4p7k = buf[0] & value_mask; + cc1_12k = buf[1] & value_mask; + cc2_4p7k = buf[2] & value_mask; + cc2_12k = buf[3] & value_mask; + + value_size = 4; + value_mask = (BIT(value_size) - 1); + cc1_0p2v = (buf[4] >> value_size * 0) & value_mask; + cc1_0p66v = (buf[4] >> value_size * 1) & value_mask; + cc1_0p8v = (buf[5] >> value_size * 0) & value_mask; + cc1_1p23v = (buf[5] >> value_size * 1) & value_mask; + cc1_2p6v = (buf[6] >> value_size * 0) & value_mask; + + cc2_0p2v = (buf[6] >> value_size * 1) & value_mask; + cc2_0p66v = (buf[7] >> value_size * 0) & value_mask; + cc2_0p8v = (buf[7] >> value_size * 1) & value_mask; + cc2_1p23v = (buf[8] >> value_size * 0) & value_mask; + cc2_2p6v = (buf[8] >> value_size * 1) & value_mask; + + kfree(buf); + } + nvmem_cell_put(cell); + } + + dev_dbg(type_c->dev, "check efuse v2 cc1_4p7k=%d cc1_12k=%d cc2_4p7k=%d cc2_12k=%d\n", + cc1_4p7k, cc1_12k, cc2_4p7k, cc2_12k); + dev_dbg(type_c->dev, "check efuse v2 cc1_0p2v=%d cc1_0p8v=%d cc1_2p6v=%d cc1_0p66v=%d cc1_1p23v=%d\n", + cc1_0p2v, cc1_0p8v, cc1_2p6v, cc1_0p66v, cc1_1p23v); + dev_dbg(type_c->dev, "check efuse v2 cc2_0p2v=%d cc2_0p8v=%d cc2_2p6v=%d cc2_0p66v=%d cc2_1p23v=%d\n", + cc2_0p2v, cc2_0p8v, cc2_2p6v, cc2_0p66v, cc2_1p23v); + + cc_param = &type_c_cfg->cc1_param; + if (cc1_4p7k) + cc_param->rp_4p7k_code = cc1_4p7k; + if (cc1_12k) + cc_param->rp_12k_code = cc1_12k; + + if (cc1_1p23v) + cc_param->vref_1p23v = cc1_1p23v; + if (cc1_0p66v) + cc_param->vref_0p66v = cc1_0p66v; + if (cc1_2p6v) + cc_param->vref_2p6v = cc1_2p6v; + if (cc1_0p8v) + cc_param->vref_0p8v = cc1_0p8v; + if (cc1_0p2v) + cc_param->vref_0p2v = cc1_0p2v; + + cc_param = &type_c_cfg->cc2_param; + if (cc2_4p7k) + cc_param->rp_4p7k_code = cc2_4p7k; + if (cc2_12k) + cc_param->rp_12k_code = cc2_12k; + + if (cc2_1p23v) + cc_param->vref_1p23v = cc2_1p23v; + if (cc2_0p66v) + cc_param->vref_0p66v = cc2_0p66v; + if (cc2_2p6v) + cc_param->vref_2p6v = cc2_2p6v; + if (cc2_0p8v) + cc_param->vref_0p8v = cc2_0p8v; + if (cc2_0p2v) + cc_param->vref_0p2v = cc2_0p2v; + + return 0; +} + +static void get_default_type_c_parameter(struct type_c_data *type_c) +{ + void __iomem *reg; + int val; + + type_c->dfp_mode_rp_en = dfp_mode(CC_MODE_DFP_3_0) | EN_RP4P7K; + type_c->ufp_mode_rd_en = EN_RD; + + reg = type_c->reg_base + USB_TYPEC_CTRL_CC1_0; + val = readl(reg); + type_c->cc1_code = CC_CODE_MASK & val; + + reg = type_c->reg_base + USB_TYPEC_CTRL_CC2_0; + val = readl(reg); + type_c->cc2_code = CC_CODE_MASK & val; + + reg = type_c->reg_base + USB_TYPEC_CTRL_CC1_1; + val = readl(reg); + type_c->cc1_vref = val; + + reg = type_c->reg_base + USB_TYPEC_CTRL_CC2_1; + val = readl(reg); + type_c->cc2_vref = val; + + reg = type_c->reg_base + USB_TYPEC_CTRL; + val = readl(reg); + type_c->debounce = DEBOUNCE_TIME_MASK & val; +} + +static int setup_type_c_parameter(struct type_c_data *type_c) +{ + struct type_c_cfg *type_c_cfg = type_c->type_c_cfg; + struct cc_param *cc_param; + struct soc_device_attribute rtk_soc_efuse_v1[] = { + { .family = "Realtek Phoenix",}, + { .family = "Realtek Kylin",}, + { .family = "Realtek Hercules",}, + { .family = "Realtek Thor",}, + { .family = "Realtek Hank",}, + { .family = "Realtek Groot",}, + { .family = "Realtek Stark",}, + { .family = "Realtek Parker",}, + { /* empty */ } + }; + + if (type_c_cfg->use_defalut_parameter) { + get_default_type_c_parameter(type_c); + return 0; + } + + if (soc_device_match(rtk_soc_efuse_v1)) + __updated_type_c_parameter_by_efuse(type_c); + else + __updated_type_c_parameter_by_efuse_v2(type_c); + + /* + * UFP rd vref_ufp : 1p23v, 0p66v, 0p2v + * DFP_USB rp36k vref_dfp_usb: 0_1p6v, 0p2v, unused + * DFP_1.5 rp12k vref_dfp_1_5: 1_1p6v, 0p4v, 0p2v + * DFP_3.0 rp4p7k vref_dfp_3_0: 2p6v, 0p8v, 0p2v + */ + + switch (type_c_cfg->cc_dfp_mode) { + case CC_MODE_DFP_USB: + type_c->dfp_mode_rp_en = dfp_mode(CC_MODE_DFP_USB) | EN_RP36K; + break; + case CC_MODE_DFP_1_5: + type_c->dfp_mode_rp_en = dfp_mode(CC_MODE_DFP_1_5) | EN_RP12K; + break; + case CC_MODE_DFP_3_0: + type_c->dfp_mode_rp_en = dfp_mode(CC_MODE_DFP_3_0) | EN_RP4P7K; + break; + default: + dev_err(type_c->dev, "%s: unknown cc_dfp_mode %d\n", + __func__, type_c_cfg->cc_dfp_mode); + } + + type_c->ufp_mode_rd_en = EN_RD; + + cc_param = &type_c_cfg->cc1_param; + type_c->cc1_code = rp4pk_code(cc_param->rp_4p7k_code) | + rp36k_code(cc_param->rp_36k_code) | + rp12k_code(cc_param->rp_12k_code) | + rd_code(cc_param->rd_code); + + if (type_c_cfg->parameter_ver == PARAMETER_V0) + type_c->cc1_vref = V0_vref_2p6v(cc_param->vref_2p6v) | + V0_vref_1p23v(cc_param->vref_1p23v) | + V0_vref_0p8v(cc_param->vref_0p8v) | + V0_vref_0p66v(cc_param->vref_0p66v) | + V0_vref_0p4v(cc_param->vref_0p4v) | + V0_vref_0p2v(cc_param->vref_0p2v) | + V0_vref_1_1p6v(cc_param->vref_1_1p6v) | + V0_vref_0_1p6v(cc_param->vref_0_1p6v); + else if (type_c_cfg->parameter_ver == PARAMETER_V1) + type_c->cc1_vref = V1_vref_2p6v(cc_param->vref_2p6v) | + V1_vref_1p23v(cc_param->vref_1p23v) | + V1_vref_0p8v(cc_param->vref_0p8v) | + V1_vref_0p66v(cc_param->vref_0p66v) | + V1_vref_0p4v(cc_param->vref_0p4v) | + V1_vref_0p2v(cc_param->vref_0p2v) | + V1_vref_1_1p6v(cc_param->vref_1_1p6v) | + V1_vref_0_1p6v(cc_param->vref_0_1p6v); + else + dev_err(type_c->dev, "%s: unknown parameter_ver %d\n", + __func__, type_c_cfg->parameter_ver); + + cc_param = &type_c_cfg->cc2_param; + type_c->cc2_code = rp4pk_code(cc_param->rp_4p7k_code) + | rp36k_code(cc_param->rp_36k_code) + | rp12k_code(cc_param->rp_12k_code) + | rd_code(cc_param->rd_code); + + if (type_c_cfg->parameter_ver == PARAMETER_V0) + type_c->cc2_vref = V0_vref_2p6v(cc_param->vref_2p6v) | + V0_vref_1p23v(cc_param->vref_1p23v) | + V0_vref_0p8v(cc_param->vref_0p8v) | + V0_vref_0p66v(cc_param->vref_0p66v) | + V0_vref_0p4v(cc_param->vref_0p4v) | + V0_vref_0p2v(cc_param->vref_0p2v) | + V0_vref_1_1p6v(cc_param->vref_1_1p6v) | + V0_vref_0_1p6v(cc_param->vref_0_1p6v); + else if (type_c_cfg->parameter_ver == PARAMETER_V1) + type_c->cc2_vref = V1_vref_2p6v(cc_param->vref_2p6v) | + V1_vref_1p23v(cc_param->vref_1p23v) | + V1_vref_0p8v(cc_param->vref_0p8v) | + V1_vref_0p66v(cc_param->vref_0p66v) | + V1_vref_0p4v(cc_param->vref_0p4v) | + V1_vref_0p2v(cc_param->vref_0p2v) | + V1_vref_1_1p6v(cc_param->vref_1_1p6v) | + V1_vref_0_1p6v(cc_param->vref_0_1p6v); + else + dev_err(type_c->dev, "%s: unknown parameter_ver %d\n", + __func__, type_c_cfg->parameter_ver); + + type_c->debounce = (type_c_cfg->debounce_val << 1) | DEBOUNCE_EN; + + return 0; +} + +static int extcon_rtk_type_c_init(struct type_c_data *type_c) +{ + struct device *dev = type_c->dev; + unsigned long flags; + void __iomem *reg; + int val; + + spin_lock_irqsave(&type_c->lock, flags); + + /* set parameter */ + reg = type_c->reg_base + USB_TYPEC_CTRL_CC1_0; + val = readl(reg); + val = (~CC_CODE_MASK & val) | (type_c->cc1_code & CC_CODE_MASK); + writel(val, reg); + + reg = type_c->reg_base + USB_TYPEC_CTRL_CC2_0; + val = readl(reg); + val = (~CC_CODE_MASK & val) | (type_c->cc2_code & CC_CODE_MASK); + + reg = type_c->reg_base + USB_TYPEC_CTRL_CC1_1; + writel(type_c->cc1_vref, reg); + + reg = type_c->reg_base + USB_TYPEC_CTRL_CC2_1; + writel(type_c->cc2_vref, reg); + + reg = type_c->reg_base + USB_TYPEC_CTRL; + val = readl(reg); + val = (~DEBOUNCE_TIME_MASK & val) | (type_c->debounce & DEBOUNCE_TIME_MASK); + + dev_info(dev, "First check USB_DR_MODE_PERIPHERAL"); + type_c->cc_mode = IN_DEVICE_MODE; + type_c->is_attach = IN_DETACH; + type_c->connect_change = CONNECT_NO_CHANGE; + + detect_host(type_c); + + spin_unlock_irqrestore(&type_c->lock, flags); + + schedule_delayed_work(&type_c->delayed_work, msecs_to_jiffies(0)); + + if (!type_c->port) { + struct typec_capability typec_cap = { }; + struct fwnode_handle *fwnode; + const char *buf; + int ret; + + typec_cap.revision = USB_TYPEC_REV_1_0; + typec_cap.prefer_role = TYPEC_NO_PREFERRED_ROLE; + typec_cap.driver_data = type_c; + typec_cap.ops = &type_c_port_ops; + + fwnode = device_get_named_child_node(dev, "connector"); + if (!fwnode) + return -EINVAL; + + ret = fwnode_property_read_string(fwnode, "power-role", &buf); + if (ret) { + dev_err(dev, "power-role not found: %d\n", ret); + return ret; + } + + ret = typec_find_port_power_role(buf); + if (ret < 0) + return ret; + typec_cap.type = ret; + + ret = fwnode_property_read_string(fwnode, "data-role", &buf); + if (ret) { + dev_err(dev, "data-role not found: %d\n", ret); + return ret; + } + + ret = typec_find_port_data_role(buf); + if (ret < 0) + return ret; + typec_cap.data = ret; + + type_c->port = typec_register_port(type_c->dev, &typec_cap); + if (IS_ERR(type_c->port)) + return PTR_ERR(type_c->port); + } + + return 0; +} + +static int extcon_rtk_type_c_edev_register(struct type_c_data *type_c) +{ + struct device *dev = type_c->dev; + int ret = 0; + + type_c->edev = devm_extcon_dev_allocate(dev, usb_type_c_cable); + if (IS_ERR(type_c->edev)) { + dev_err(dev, "failed to allocate extcon device\n"); + return -ENOMEM; + } + + ret = devm_extcon_dev_register(dev, type_c->edev); + if (ret < 0) { + dev_err(dev, "failed to register extcon device\n"); + return ret; + } + + extcon_set_property_capability(type_c->edev, EXTCON_USB, + EXTCON_PROP_USB_VBUS); + extcon_set_property_capability(type_c->edev, EXTCON_USB, + EXTCON_PROP_USB_TYPEC_POLARITY); + extcon_set_property_capability(type_c->edev, EXTCON_USB, + EXTCON_PROP_USB_SS); + + extcon_set_property_capability(type_c->edev, EXTCON_USB_HOST, + EXTCON_PROP_USB_VBUS); + extcon_set_property_capability(type_c->edev, EXTCON_USB_HOST, + EXTCON_PROP_USB_TYPEC_POLARITY); + extcon_set_property_capability(type_c->edev, EXTCON_USB_HOST, + EXTCON_PROP_USB_SS); + + return ret; +} + +static int extcon_rtk_type_c_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct type_c_data *type_c; + const struct type_c_cfg *type_c_cfg; + int ret = 0; + + type_c = devm_kzalloc(dev, sizeof(*type_c), GFP_KERNEL); + if (!type_c) + return -ENOMEM; + + type_c->reg_base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(type_c->reg_base)) + return PTR_ERR(type_c->reg_base); + + type_c->dev = dev; + + type_c->irq = irq_of_parse_and_map(pdev->dev.of_node, 0); + if (type_c->irq <= 0) { + dev_err(&pdev->dev, "Type C driver with no IRQ. Check %s setup!\n", + dev_name(&pdev->dev)); + ret = -ENODEV; + goto err; + } + + ret = devm_request_irq(dev, type_c->irq, type_c_detect_irq, + IRQF_SHARED, "type_c_detect", type_c); + + spin_lock_init(&type_c->lock); + + type_c->rd_ctrl_gpio_desc = NULL; + if (soc_device_match(rtk_soc_kylin)) { + struct gpio_desc *gpio; + + gpio = fwnode_gpiod_get_index(of_fwnode_handle(dev->of_node), + "realtek,rd-ctrl-gpios", + 0, GPIOD_OUT_HIGH, "rd-ctrl-gpio"); + if (IS_ERR(gpio)) { + dev_err(dev, "Error rd_ctrl-gpios no found (err=%d)\n", + (int)PTR_ERR(gpio)); + } else { + type_c->rd_ctrl_gpio_desc = gpio; + dev_dbg(dev, "%s get rd-ctrl-gpios (id=%d) OK\n", + __func__, desc_to_gpio(gpio)); + } + } + + type_c_cfg = of_device_get_match_data(dev); + if (!type_c_cfg) { + dev_err(dev, "type_c config are not assigned!\n"); + ret = -EINVAL; + goto err; + } + + type_c->type_c_cfg = devm_kzalloc(dev, sizeof(*type_c_cfg), GFP_KERNEL); + + memcpy(type_c->type_c_cfg, type_c_cfg, sizeof(*type_c_cfg)); + + if (setup_type_c_parameter(type_c)) { + dev_err(dev, "ERROR: %s to setup type c parameter!!", __func__); + ret = -EINVAL; + goto err; + } + + INIT_DELAYED_WORK(&type_c->delayed_work, host_device_switch); + + ret = extcon_rtk_type_c_init(type_c); + if (ret) { + dev_err(dev, "%s failed to init type_c\n", __func__); + goto err; + } + + platform_set_drvdata(pdev, type_c); + + ret = extcon_rtk_type_c_edev_register(type_c); + + create_debug_files(type_c); + + return 0; + +err: + dev_err(&pdev->dev, "%s: Probe fail, %d\n", __func__, ret); + + return ret; +} + +static void extcon_rtk_type_c_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct type_c_data *type_c = dev_get_drvdata(dev); + u32 default_ctrl; + unsigned long flags; + + remove_debug_files(type_c); + + if (type_c->port) { + typec_unregister_port(type_c->port); + type_c->port = NULL; + } + + cancel_delayed_work_sync(&type_c->delayed_work); + flush_delayed_work(&type_c->delayed_work); + WARN_ON_ONCE(delayed_work_pending(&type_c->delayed_work)); + + spin_lock_irqsave(&type_c->lock, flags); + /* disable interrupt */ + default_ctrl = readl(type_c->reg_base + USB_TYPEC_CTRL) & + DEBOUNCE_TIME_MASK; + writel(default_ctrl, type_c->reg_base + USB_TYPEC_CTRL); + + /* disable cc detect, rp, rd */ + writel(PLR_EN, type_c->reg_base + USB_TYPEC_CTRL_CC1_0); + writel(0, type_c->reg_base + USB_TYPEC_CTRL_CC2_0); + + spin_unlock_irqrestore(&type_c->lock, flags); + + if (type_c->rd_ctrl_gpio_desc) + gpiod_put(type_c->rd_ctrl_gpio_desc); + type_c->rd_ctrl_gpio_desc = NULL; + + free_irq(type_c->irq, type_c); +} + +static const struct type_c_cfg rtd1295_type_c_cfg = { + .parameter_ver = PARAMETER_V0, + .cc_dfp_mode = CC_MODE_DFP_3_0, + .cc1_param = { .rp_4p7k_code = 0xb, + .rp_36k_code = 0x17, + .rp_12k_code = 0x10, + .rd_code = 0, + .ra_code = 0, + .vref_2p6v = 0x0, + .vref_1p23v = 0x0, + .vref_0p8v = 0x3, + .vref_0p66v = 0x0, + .vref_0p4v = 0x0, + .vref_0p2v = 0x4, + .vref_1_1p6v = 0, + .vref_0_1p6v = 0 }, + .cc2_param = { .rp_4p7k_code = 0xc, + .rp_36k_code = 0x17, + .rp_12k_code = 0x12, + .rd_code = 0, + .ra_code = 0, + .vref_2p6v = 0x2, + .vref_1p23v = 0x0, + .vref_0p8v = 0x3, + .vref_0p66v = 0x0, + .vref_0p4v = 0x0, + .vref_0p2v = 0x5, + .vref_1_1p6v = 0, + .vref_0_1p6v = 0 }, + .debounce_val = 0x7f, /* 1b,1us 7f,4.7us */ + .use_defalut_parameter = false, +}; + +static const struct type_c_cfg rtd1395_type_c_cfg = { + .parameter_ver = PARAMETER_V0, + .cc_dfp_mode = CC_MODE_DFP_3_0, + .cc1_param = { .rp_4p7k_code = 0xc, + .rp_36k_code = 0xb, + .rp_12k_code = 0xe, + .rd_code = 0x10, + .ra_code = 0x0, + .vref_2p6v = 0x0, + .vref_1p23v = 0x1, + .vref_0p8v = 0x0, + .vref_0p66v = 0x0, + .vref_0p4v = 0x3, + .vref_0p2v = 0x0, + .vref_1_1p6v = 0x7, + .vref_0_1p6v = 0x7 }, + .cc2_param = { .rp_4p7k_code = 0xb, + .rp_36k_code = 0x9, + .rp_12k_code = 0xe, + .rd_code = 0xf, + .ra_code = 0x0, + .vref_2p6v = 0x1, + .vref_1p23v = 0x3, + .vref_0p8v = 0x3, + .vref_0p66v = 0x2, + .vref_0p4v = 0x3, + .vref_0p2v = 0x2, + .vref_1_1p6v = 0x7, + .vref_0_1p6v = 0x7 }, + .debounce_val = 0x7f, /* 1b,1us 7f,4.7us */ + .use_defalut_parameter = false, +}; + +static const struct type_c_cfg rtd1619_type_c_cfg = { + .parameter_ver = PARAMETER_V0, + .cc_dfp_mode = CC_MODE_DFP_3_0, + .cc1_param = { .rp_4p7k_code = 0xc, + .rp_36k_code = 0xf, + .rp_12k_code = 0xe, + .rd_code = 0x11, + .ra_code = 0x0, + .vref_2p6v = 0x5, + .vref_1p23v = 0x7, + .vref_0p8v = 0xa, + .vref_0p66v = 0xa, + .vref_0p4v = 0x3, + .vref_0p2v = 0x2, + .vref_1_1p6v = 0x7, + .vref_0_1p6v = 0x7 }, + .cc2_param = { .rp_4p7k_code = 0xc, + .rp_36k_code = 0xf, + .rp_12k_code = 0xe, + .rd_code = 0xf, + .ra_code = 0x0, + .vref_2p6v = 0x5, + .vref_1p23v = 0x8, + .vref_0p8v = 0xa, + .vref_0p66v = 0xa, + .vref_0p4v = 0x3, + .vref_0p2v = 0x2, + .vref_1_1p6v = 0x7, + .vref_0_1p6v = 0x7 }, + .debounce_val = 0x7f, /* 1b,1us 7f,4.7us */ + .use_defalut_parameter = false, +}; + +static const struct type_c_cfg rtd1319_type_c_cfg = { + .parameter_ver = PARAMETER_V0, + .cc_dfp_mode = CC_MODE_DFP_1_5, + .cc1_param = { .rp_4p7k_code = 0x9, + .rp_36k_code = 0xe, + .rp_12k_code = 0x9, + .rd_code = 0x9, + .ra_code = 0x7, + .vref_2p6v = 0x3, + .vref_1p23v = 0x7, + .vref_0p8v = 0x7, + .vref_0p66v = 0x6, + .vref_0p4v = 0x2, + .vref_0p2v = 0x3, + .vref_1_1p6v = 0x4, + .vref_0_1p6v = 0x7 }, + .cc2_param = { .rp_4p7k_code = 0x8, + .rp_36k_code = 0xe, + .rp_12k_code = 0x9, + .rd_code = 0x9, + .ra_code = 0x7, + .vref_2p6v = 0x3, + .vref_1p23v = 0x7, + .vref_0p8v = 0x7, + .vref_0p66v = 0x6, + .vref_0p4v = 0x3, + .vref_0p2v = 0x3, + .vref_1_1p6v = 0x6, + .vref_0_1p6v = 0x7 }, + .debounce_val = 0x7f, /* 1b,1us 7f,4.7us */ + .use_defalut_parameter = false, +}; + +static const struct type_c_cfg rtd1312c_type_c_cfg = { + .parameter_ver = PARAMETER_V0, + .cc_dfp_mode = CC_MODE_DFP_1_5, + .cc1_param = { .rp_4p7k_code = 0xe, + .rp_36k_code = 0xc, + .rp_12k_code = 0xc, + .rd_code = 0xa, + .ra_code = 0x3, + .vref_2p6v = 0xa, + .vref_1p23v = 0x7, + .vref_0p8v = 0x7, + .vref_0p66v = 0x7, + .vref_0p4v = 0x4, + .vref_0p2v = 0x4, + .vref_1_1p6v = 0x7, + .vref_0_1p6v = 0x7 }, + .cc2_param = { .rp_4p7k_code = 0xe, + .rp_36k_code = 0xc, + .rp_12k_code = 0xc, + .rd_code = 0xa, + .ra_code = 0x3, + .vref_2p6v = 0xa, + .vref_1p23v = 0x7, + .vref_0p8v = 0x7, + .vref_0p66v = 0x7, + .vref_0p4v = 0x4, + .vref_0p2v = 0x4, + .vref_1_1p6v = 0x7, + .vref_0_1p6v = 0x7 }, + .debounce_val = 0x7f, /* 1b,1us 7f,4.7us */ + .use_defalut_parameter = false, +}; + +static const struct type_c_cfg rtd1619b_type_c_cfg = { + .parameter_ver = PARAMETER_V1, + .cc_dfp_mode = CC_MODE_DFP_1_5, + .cc1_param = { .rp_4p7k_code = 0xf, + .rp_36k_code = 0xf, + .rp_12k_code = 0xf, + .rd_code = 0xf, + .ra_code = 0x7, + .vref_2p6v = 0x9, + .vref_1p23v = 0x7, + .vref_0p8v = 0x9, + .vref_0p66v = 0x8, + .vref_0p4v = 0x7, + .vref_0p2v = 0x9, + .vref_1_1p6v = 0x7, + .vref_0_1p6v = 0x7 }, + .cc2_param = { .rp_4p7k_code = 0xf, + .rp_36k_code = 0xf, + .rp_12k_code = 0xf, + .rd_code = 0xf, + .ra_code = 0x7, + .vref_1p23v = 0x7, + .vref_0p8v = 0x9, + .vref_0p66v = 0x8, + .vref_0p4v = 0x7, + .vref_0p2v = 0x8, + .vref_1_1p6v = 0x7, + .vref_0_1p6v = 0x7 }, + .debounce_val = 0x7f, /* 1b,1us 7f,4.7us */ + .use_defalut_parameter = false, +}; + +static const struct type_c_cfg rtd1319d_type_c_cfg = { + .parameter_ver = PARAMETER_V1, + .cc_dfp_mode = CC_MODE_DFP_1_5, + .cc1_param = { .rp_4p7k_code = 0xe, + .rp_36k_code = 0x3, + .rp_12k_code = 0xe, + .rd_code = 0xf, + .ra_code = 0x6, + .vref_2p6v = 0x7, + .vref_1p23v = 0x7, + .vref_0p8v = 0x8, + .vref_0p66v = 0x7, + .vref_0p4v = 0x7, + .vref_0p2v = 0x7, + .vref_1_1p6v = 0x7, + .vref_0_1p6v = 0x7 }, + .cc2_param = { .rp_4p7k_code = 0xe, + .rp_36k_code = 0x3, + .rp_12k_code = 0xe, + .rd_code = 0xf, + .ra_code = 0x6, + .vref_2p6v = 0x7, + .vref_1p23v = 0x7, + .vref_0p8v = 0x8, + .vref_0p66v = 0x7, + .vref_0p4v = 0x7, + .vref_0p2v = 0x8, + .vref_1_1p6v = 0x7, + .vref_0_1p6v = 0x7 }, + .debounce_val = 0x7f, /* 1b,1us 7f,4.7us */ + .use_defalut_parameter = false, +}; + +static const struct type_c_cfg rtd1315e_type_c_cfg = { + .parameter_ver = PARAMETER_V1, + .cc_dfp_mode = CC_MODE_DFP_1_5, + .cc1_param = { .rp_4p7k_code = 0xe, + .rp_36k_code = 0x3, + .rp_12k_code = 0xe, + .rd_code = 0xf, + .ra_code = 0x6, + .vref_2p6v = 0x7, + .vref_1p23v = 0x7, + .vref_0p8v = 0x8, + .vref_0p66v = 0x7, + .vref_0p4v = 0x7, + .vref_0p2v = 0x7, + .vref_1_1p6v = 0x7, + .vref_0_1p6v = 0x7 }, + .cc2_param = { .rp_4p7k_code = 0xe, + .rp_36k_code = 0x3, + .rp_12k_code = 0xe, + .rd_code = 0xf, + .ra_code = 0x6, + .vref_2p6v = 0x7, + .vref_1p23v = 0x7, + .vref_0p8v = 0x8, + .vref_0p66v = 0x7, + .vref_0p4v = 0x7, + .vref_0p2v = 0x8, + .vref_1_1p6v = 0x7, + .vref_0_1p6v = 0x7 }, + .debounce_val = 0x7f, /* 1b,1us 7f,4.7us */ + .use_defalut_parameter = false, +}; + +static const struct of_device_id extcon_rtk_type_c_match[] = { + { .compatible = "realtek,rtd1295-type-c", .data = &rtd1295_type_c_cfg }, + { .compatible = "realtek,rtd1312c-type-c", .data = &rtd1312c_type_c_cfg }, + { .compatible = "realtek,rtd1315e-type-c", .data = &rtd1315e_type_c_cfg }, + { .compatible = "realtek,rtd1319-type-c", .data = &rtd1319_type_c_cfg }, + { .compatible = "realtek,rtd1319d-type-c", .data = &rtd1319d_type_c_cfg }, + { .compatible = "realtek,rtd1395-type-c", .data = &rtd1395_type_c_cfg }, + { .compatible = "realtek,rtd1619-type-c", .data = &rtd1619_type_c_cfg }, + { .compatible = "realtek,rtd1619b-type-c", .data = &rtd1619b_type_c_cfg }, + {}, +}; +MODULE_DEVICE_TABLE(of, extcon_rtk_type_c_match); + +#ifdef CONFIG_PM_SLEEP +static int extcon_rtk_type_c_prepare(struct device *dev) +{ + struct type_c_data *type_c = dev_get_drvdata(dev); + u32 default_ctrl; + unsigned long flags; + + cancel_delayed_work_sync(&type_c->delayed_work); + flush_delayed_work(&type_c->delayed_work); + WARN_ON_ONCE(delayed_work_pending(&type_c->delayed_work)); + + spin_lock_irqsave(&type_c->lock, flags); + /* disable interrupt */ + default_ctrl = readl(type_c->reg_base + USB_TYPEC_CTRL) & + DEBOUNCE_TIME_MASK; + writel(default_ctrl, type_c->reg_base + USB_TYPEC_CTRL); + + /* disable cc detect, rp, rd */ + writel(PLR_EN, type_c->reg_base + USB_TYPEC_CTRL_CC1_0); + writel(0, type_c->reg_base + USB_TYPEC_CTRL_CC2_0); + + spin_unlock_irqrestore(&type_c->lock, flags); + + return 0; +} + +static void extcon_rtk_type_c_complete(struct device *dev) +{ + /* nothing */ +} + +static int extcon_rtk_type_c_suspend(struct device *dev) +{ + /* nothing */ + + return 0; +} + +static int extcon_rtk_type_c_resume(struct device *dev) +{ + struct type_c_data *type_c = dev_get_drvdata(dev); + int ret; + + ret = extcon_rtk_type_c_init(type_c); + if (ret) { + dev_err(dev, "%s failed to init type_c\n", __func__); + return ret; + } + + return 0; +} + +static const struct dev_pm_ops extcon_rtk_type_c_pm_ops = { + SET_LATE_SYSTEM_SLEEP_PM_OPS(extcon_rtk_type_c_suspend, extcon_rtk_type_c_resume) + .prepare = extcon_rtk_type_c_prepare, + .complete = extcon_rtk_type_c_complete, +}; + +#define DEV_PM_OPS (&extcon_rtk_type_c_pm_ops) +#else +#define DEV_PM_OPS NULL +#endif /* CONFIG_PM_SLEEP */ + +static struct platform_driver extcon_rtk_type_c_driver = { + .probe = extcon_rtk_type_c_probe, + .remove_new = extcon_rtk_type_c_remove, + .driver = { + .name = "extcon-rtk-type_c", + .of_match_table = extcon_rtk_type_c_match, + .pm = DEV_PM_OPS, + }, +}; + +module_platform_driver(extcon_rtk_type_c_driver); + +MODULE_DESCRIPTION("Realtek Extcon Type C driver"); +MODULE_AUTHOR("Stanley Chang <stanley_chang@realtek.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c index 4cc1ac7f76ed..b0d22d4455d9 100644 --- a/drivers/firmware/xilinx/zynqmp.c +++ b/drivers/firmware/xilinx/zynqmp.c @@ -226,7 +226,6 @@ static int do_feature_check_call(const u32 api_id) return ret; } -EXPORT_SYMBOL_GPL(zynqmp_pm_feature); /** * zynqmp_pm_feature() - Check whether given feature is supported or not and @@ -246,6 +245,7 @@ int zynqmp_pm_feature(const u32 api_id) return ret; } +EXPORT_SYMBOL_GPL(zynqmp_pm_feature); /** * zynqmp_pm_is_function_supported() - Check whether given IOCTL/QUERY function diff --git a/drivers/fpga/altera-hps2fpga.c b/drivers/fpga/altera-hps2fpga.c index aa758426c22b..578663503297 100644 --- a/drivers/fpga/altera-hps2fpga.c +++ b/drivers/fpga/altera-hps2fpga.c @@ -24,7 +24,8 @@ #include <linux/kernel.h> #include <linux/mfd/syscon.h> #include <linux/module.h> -#include <linux/of_platform.h> +#include <linux/of.h> +#include <linux/property.h> #include <linux/regmap.h> #include <linux/reset.h> #include <linux/spinlock.h> @@ -127,18 +128,11 @@ static int alt_fpga_bridge_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct altera_hps2fpga_data *priv; - const struct of_device_id *of_id; struct fpga_bridge *br; u32 enable; int ret; - of_id = of_match_device(altera_fpga_of_match, dev); - if (!of_id) { - dev_err(dev, "failed to match device\n"); - return -ENODEV; - } - - priv = (struct altera_hps2fpga_data *)of_id->data; + priv = (struct altera_hps2fpga_data *)device_get_match_data(dev); priv->bridge_reset = of_reset_control_get_exclusive_by_index(dev->of_node, 0); diff --git a/drivers/fpga/altera-ps-spi.c b/drivers/fpga/altera-ps-spi.c index 5e1e009dba89..740980e7cef8 100644 --- a/drivers/fpga/altera-ps-spi.c +++ b/drivers/fpga/altera-ps-spi.c @@ -18,8 +18,7 @@ #include <linux/fpga/fpga-mgr.h> #include <linux/gpio/consumer.h> #include <linux/module.h> -#include <linux/of_gpio.h> -#include <linux/of_device.h> +#include <linux/of.h> #include <linux/spi/spi.h> #include <linux/sizes.h> @@ -72,12 +71,6 @@ static struct altera_ps_data a10_data = { .t_st2ck_us = 10, /* min(t_ST2CK) */ }; -/* Array index is enum altera_ps_devtype */ -static const struct altera_ps_data *altera_ps_data_map[] = { - &c5_data, - &a10_data, -}; - static const struct of_device_id of_ef_match[] = { { .compatible = "altr,fpga-passive-serial", .data = &c5_data }, { .compatible = "altr,fpga-arria10-passive-serial", .data = &a10_data }, @@ -237,43 +230,16 @@ static const struct fpga_manager_ops altera_ps_ops = { .write_complete = altera_ps_write_complete, }; -static const struct altera_ps_data *id_to_data(const struct spi_device_id *id) -{ - kernel_ulong_t devtype = id->driver_data; - const struct altera_ps_data *data; - - /* someone added a altera_ps_devtype without adding to the map array */ - if (devtype >= ARRAY_SIZE(altera_ps_data_map)) - return NULL; - - data = altera_ps_data_map[devtype]; - if (!data || data->devtype != devtype) - return NULL; - - return data; -} - static int altera_ps_probe(struct spi_device *spi) { struct altera_ps_conf *conf; - const struct of_device_id *of_id; struct fpga_manager *mgr; conf = devm_kzalloc(&spi->dev, sizeof(*conf), GFP_KERNEL); if (!conf) return -ENOMEM; - if (spi->dev.of_node) { - of_id = of_match_device(of_ef_match, &spi->dev); - if (!of_id) - return -ENODEV; - conf->data = of_id->data; - } else { - conf->data = id_to_data(spi_get_device_id(spi)); - if (!conf->data) - return -ENODEV; - } - + conf->data = spi_get_device_match_data(spi); conf->spi = spi; conf->config = devm_gpiod_get(&spi->dev, "nconfig", GPIOD_OUT_LOW); if (IS_ERR(conf->config)) { @@ -308,9 +274,9 @@ static int altera_ps_probe(struct spi_device *spi) } static const struct spi_device_id altera_ps_spi_ids[] = { - { "cyclone-ps-spi", CYCLONE5 }, - { "fpga-passive-serial", CYCLONE5 }, - { "fpga-arria10-passive-serial", ARRIA10 }, + { "cyclone-ps-spi", (uintptr_t)&c5_data }, + { "fpga-passive-serial", (uintptr_t)&c5_data }, + { "fpga-arria10-passive-serial", (uintptr_t)&a10_data }, {} }; MODULE_DEVICE_TABLE(spi, altera_ps_spi_ids); @@ -319,7 +285,7 @@ static struct spi_driver altera_ps_driver = { .driver = { .name = "altera-ps-spi", .owner = THIS_MODULE, - .of_match_table = of_match_ptr(of_ef_match), + .of_match_table = of_ef_match, }, .id_table = altera_ps_spi_ids, .probe = altera_ps_probe, diff --git a/drivers/fpga/versal-fpga.c b/drivers/fpga/versal-fpga.c index e1601b3a345b..3710e8f01be2 100644 --- a/drivers/fpga/versal-fpga.c +++ b/drivers/fpga/versal-fpga.c @@ -48,7 +48,7 @@ static int versal_fpga_probe(struct platform_device *pdev) struct fpga_manager *mgr; int ret; - ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(44)); if (ret < 0) { dev_err(dev, "no usable DMA configuration\n"); return ret; diff --git a/drivers/fpga/xilinx-pr-decoupler.c b/drivers/fpga/xilinx-pr-decoupler.c index 208d9560f56d..68835896f180 100644 --- a/drivers/fpga/xilinx-pr-decoupler.c +++ b/drivers/fpga/xilinx-pr-decoupler.c @@ -10,8 +10,10 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/kernel.h> -#include <linux/of_device.h> #include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/property.h> #include <linux/fpga/fpga-bridge.h> #define CTRL_CMD_DECOUPLE BIT(0) @@ -81,7 +83,6 @@ static const struct fpga_bridge_ops xlnx_pr_decoupler_br_ops = { .enable_show = xlnx_pr_decoupler_enable_show, }; -#ifdef CONFIG_OF static const struct xlnx_config_data decoupler_config = { .name = "Xilinx PR Decoupler", }; @@ -100,11 +101,9 @@ static const struct of_device_id xlnx_pr_decoupler_of_match[] = { {}, }; MODULE_DEVICE_TABLE(of, xlnx_pr_decoupler_of_match); -#endif static int xlnx_pr_decoupler_probe(struct platform_device *pdev) { - struct device_node *np = pdev->dev.of_node; struct xlnx_pr_decoupler_data *priv; struct fpga_bridge *br; int err; @@ -113,13 +112,7 @@ static int xlnx_pr_decoupler_probe(struct platform_device *pdev) if (!priv) return -ENOMEM; - if (np) { - const struct of_device_id *match; - - match = of_match_node(xlnx_pr_decoupler_of_match, np); - if (match && match->data) - priv->ipconfig = match->data; - } + priv->ipconfig = device_get_match_data(&pdev->dev); priv->io_base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(priv->io_base)) @@ -174,7 +167,7 @@ static struct platform_driver xlnx_pr_decoupler_driver = { .remove = xlnx_pr_decoupler_remove, .driver = { .name = "xlnx_pr_decoupler", - .of_match_table = of_match_ptr(xlnx_pr_decoupler_of_match), + .of_match_table = xlnx_pr_decoupler_of_match, }, }; diff --git a/drivers/gpu/drm/i915/pxp/intel_pxp_tee.c b/drivers/gpu/drm/i915/pxp/intel_pxp_tee.c index 9327701da1b5..b00d6c280159 100644 --- a/drivers/gpu/drm/i915/pxp/intel_pxp_tee.c +++ b/drivers/gpu/drm/i915/pxp/intel_pxp_tee.c @@ -21,6 +21,8 @@ #include "intel_pxp_tee.h" #include "intel_pxp_types.h" +#define PXP_TRANSPORT_TIMEOUT_MS 5000 /* 5 sec */ + static bool is_fw_err_platform_config(struct intel_pxp *pxp, u32 type) { @@ -73,13 +75,15 @@ static int intel_pxp_tee_io_message(struct intel_pxp *pxp, goto unlock; } - ret = pxp_component->ops->send(pxp_component->tee_dev, msg_in, msg_in_size); + ret = pxp_component->ops->send(pxp_component->tee_dev, msg_in, msg_in_size, + PXP_TRANSPORT_TIMEOUT_MS); if (ret) { drm_err(&i915->drm, "Failed to send PXP TEE message\n"); goto unlock; } - ret = pxp_component->ops->recv(pxp_component->tee_dev, msg_out, msg_out_max_size); + ret = pxp_component->ops->recv(pxp_component->tee_dev, msg_out, msg_out_max_size, + PXP_TRANSPORT_TIMEOUT_MS); if (ret < 0) { drm_err(&i915->drm, "Failed to receive PXP TEE message\n"); goto unlock; diff --git a/drivers/greybus/Kconfig b/drivers/greybus/Kconfig index 78ba3c3083d5..033d31dbf3b8 100644 --- a/drivers/greybus/Kconfig +++ b/drivers/greybus/Kconfig @@ -17,6 +17,16 @@ menuconfig GREYBUS if GREYBUS +config GREYBUS_BEAGLEPLAY + tristate "Greybus BeaglePlay driver" + depends on SERIAL_DEV_BUS + help + Select this option if you have a BeaglePlay where CC1352 + co-processor acts as Greybus SVC. + + To compile this code as a module, chose M here: the module + will be called gb-beagleplay.ko + config GREYBUS_ES2 tristate "Greybus ES3 USB host controller" depends on USB diff --git a/drivers/greybus/Makefile b/drivers/greybus/Makefile index 9bccdd229aa2..d986e94f8897 100644 --- a/drivers/greybus/Makefile +++ b/drivers/greybus/Makefile @@ -18,6 +18,8 @@ obj-$(CONFIG_GREYBUS) += greybus.o # needed for trace events ccflags-y += -I$(src) +obj-$(CONFIG_GREYBUS_BEAGLEPLAY) += gb-beagleplay.o + # Greybus Host controller drivers gb-es2-y := es2.o diff --git a/drivers/greybus/gb-beagleplay.c b/drivers/greybus/gb-beagleplay.c new file mode 100644 index 000000000000..43318c1993ba --- /dev/null +++ b/drivers/greybus/gb-beagleplay.c @@ -0,0 +1,501 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Beagleplay Linux Driver for Greybus + * + * Copyright (c) 2023 Ayush Singh <ayushdevel1325@gmail.com> + * Copyright (c) 2023 BeagleBoard.org Foundation + */ + +#include <linux/gfp.h> +#include <linux/greybus.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/printk.h> +#include <linux/serdev.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/greybus/hd.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/crc-ccitt.h> +#include <linux/circ_buf.h> +#include <linux/types.h> +#include <linux/workqueue.h> + +#define RX_HDLC_PAYLOAD 256 +#define CRC_LEN 2 +#define MAX_RX_HDLC (1 + RX_HDLC_PAYLOAD + CRC_LEN) +#define TX_CIRC_BUF_SIZE 1024 + +#define ADDRESS_GREYBUS 0x01 +#define ADDRESS_DBG 0x02 +#define ADDRESS_CONTROL 0x03 + +#define HDLC_FRAME 0x7E +#define HDLC_ESC 0x7D +#define HDLC_XOR 0x20 + +#define CONTROL_SVC_START 0x01 +#define CONTROL_SVC_STOP 0x02 + +/* The maximum number of CPorts supported by Greybus Host Device */ +#define GB_MAX_CPORTS 32 + +/** + * struct gb_beagleplay - BeaglePlay Greybus driver + * + * @sd: underlying serdev device + * + * @gb_hd: greybus host device + * + * @tx_work: hdlc transmit work + * @tx_producer_lock: hdlc transmit data producer lock. acquired when appending data to buffer. + * @tx_consumer_lock: hdlc transmit data consumer lock. acquired when sending data over uart. + * @tx_circ_buf: hdlc transmit circular buffer. + * @tx_crc: hdlc transmit crc-ccitt fcs + * + * @rx_buffer_len: length of receive buffer filled. + * @rx_buffer: hdlc frame receive buffer + * @rx_in_esc: hdlc rx flag to indicate ESC frame + */ +struct gb_beagleplay { + struct serdev_device *sd; + + struct gb_host_device *gb_hd; + + struct work_struct tx_work; + spinlock_t tx_producer_lock; + spinlock_t tx_consumer_lock; + struct circ_buf tx_circ_buf; + u16 tx_crc; + + u16 rx_buffer_len; + bool rx_in_esc; + u8 rx_buffer[MAX_RX_HDLC]; +}; + +/** + * struct hdlc_payload - Structure to represent part of HDCL frame payload data. + * + * @len: buffer length in bytes + * @buf: payload buffer + */ +struct hdlc_payload { + u16 len; + void *buf; +}; + +static void hdlc_rx_greybus_frame(struct gb_beagleplay *bg, u8 *buf, u16 len) +{ + u16 cport_id; + struct gb_operation_msg_hdr *hdr = (struct gb_operation_msg_hdr *)buf; + + memcpy(&cport_id, hdr->pad, sizeof(cport_id)); + + dev_dbg(&bg->sd->dev, "Greybus Operation %u type %X cport %u status %u received", + hdr->operation_id, hdr->type, cport_id, hdr->result); + + greybus_data_rcvd(bg->gb_hd, cport_id, buf, len); +} + +static void hdlc_rx_dbg_frame(const struct gb_beagleplay *bg, const char *buf, u16 len) +{ + dev_dbg(&bg->sd->dev, "CC1352 Log: %.*s", (int)len, buf); +} + +/** + * hdlc_write() - Consume HDLC Buffer. + * @bg: beagleplay greybus driver + * + * Assumes that consumer lock has been acquired. + */ +static void hdlc_write(struct gb_beagleplay *bg) +{ + int written; + /* Start consuming HDLC data */ + int head = smp_load_acquire(&bg->tx_circ_buf.head); + int tail = bg->tx_circ_buf.tail; + int count = CIRC_CNT_TO_END(head, tail, TX_CIRC_BUF_SIZE); + const unsigned char *buf = &bg->tx_circ_buf.buf[tail]; + + if (count > 0) { + written = serdev_device_write_buf(bg->sd, buf, count); + + /* Finish consuming HDLC data */ + smp_store_release(&bg->tx_circ_buf.tail, (tail + written) & (TX_CIRC_BUF_SIZE - 1)); + } +} + +/** + * hdlc_append() - Queue HDLC data for sending. + * @bg: beagleplay greybus driver + * @value: hdlc byte to transmit + * + * Assumes that producer lock as been acquired. + */ +static void hdlc_append(struct gb_beagleplay *bg, u8 value) +{ + int tail, head = bg->tx_circ_buf.head; + + while (true) { + tail = READ_ONCE(bg->tx_circ_buf.tail); + + if (CIRC_SPACE(head, tail, TX_CIRC_BUF_SIZE) >= 1) { + bg->tx_circ_buf.buf[head] = value; + + /* Finish producing HDLC byte */ + smp_store_release(&bg->tx_circ_buf.head, + (head + 1) & (TX_CIRC_BUF_SIZE - 1)); + return; + } + dev_warn(&bg->sd->dev, "Tx circ buf full"); + usleep_range(3000, 5000); + } +} + +static void hdlc_append_escaped(struct gb_beagleplay *bg, u8 value) +{ + if (value == HDLC_FRAME || value == HDLC_ESC) { + hdlc_append(bg, HDLC_ESC); + value ^= HDLC_XOR; + } + hdlc_append(bg, value); +} + +static void hdlc_append_tx_frame(struct gb_beagleplay *bg) +{ + bg->tx_crc = 0xFFFF; + hdlc_append(bg, HDLC_FRAME); +} + +static void hdlc_append_tx_u8(struct gb_beagleplay *bg, u8 value) +{ + bg->tx_crc = crc_ccitt(bg->tx_crc, &value, 1); + hdlc_append_escaped(bg, value); +} + +static void hdlc_append_tx_buf(struct gb_beagleplay *bg, const u8 *buf, u16 len) +{ + size_t i; + + for (i = 0; i < len; i++) + hdlc_append_tx_u8(bg, buf[i]); +} + +static void hdlc_append_tx_crc(struct gb_beagleplay *bg) +{ + bg->tx_crc ^= 0xffff; + hdlc_append_escaped(bg, bg->tx_crc & 0xff); + hdlc_append_escaped(bg, (bg->tx_crc >> 8) & 0xff); +} + +static void hdlc_transmit(struct work_struct *work) +{ + struct gb_beagleplay *bg = container_of(work, struct gb_beagleplay, tx_work); + + spin_lock_bh(&bg->tx_consumer_lock); + hdlc_write(bg); + spin_unlock_bh(&bg->tx_consumer_lock); +} + +static void hdlc_tx_frames(struct gb_beagleplay *bg, u8 address, u8 control, + const struct hdlc_payload payloads[], size_t count) +{ + size_t i; + + spin_lock(&bg->tx_producer_lock); + + hdlc_append_tx_frame(bg); + hdlc_append_tx_u8(bg, address); + hdlc_append_tx_u8(bg, control); + + for (i = 0; i < count; ++i) + hdlc_append_tx_buf(bg, payloads[i].buf, payloads[i].len); + + hdlc_append_tx_crc(bg); + hdlc_append_tx_frame(bg); + + spin_unlock(&bg->tx_producer_lock); + + schedule_work(&bg->tx_work); +} + +static void hdlc_tx_s_frame_ack(struct gb_beagleplay *bg) +{ + hdlc_tx_frames(bg, bg->rx_buffer[0], (bg->rx_buffer[1] >> 1) & 0x7, NULL, 0); +} + +static void hdlc_rx_frame(struct gb_beagleplay *bg) +{ + u16 crc, len; + u8 ctrl, *buf; + u8 address = bg->rx_buffer[0]; + + crc = crc_ccitt(0xffff, bg->rx_buffer, bg->rx_buffer_len); + if (crc != 0xf0b8) { + dev_warn_ratelimited(&bg->sd->dev, "CRC failed from %02x: 0x%04x", address, crc); + return; + } + + ctrl = bg->rx_buffer[1]; + buf = &bg->rx_buffer[2]; + len = bg->rx_buffer_len - 4; + + /* I-Frame, send S-Frame ACK */ + if ((ctrl & 1) == 0) + hdlc_tx_s_frame_ack(bg); + + switch (address) { + case ADDRESS_DBG: + hdlc_rx_dbg_frame(bg, buf, len); + break; + case ADDRESS_GREYBUS: + hdlc_rx_greybus_frame(bg, buf, len); + break; + default: + dev_warn_ratelimited(&bg->sd->dev, "unknown frame %u", address); + } +} + +static int hdlc_rx(struct gb_beagleplay *bg, const u8 *data, size_t count) +{ + size_t i; + u8 c; + + for (i = 0; i < count; ++i) { + c = data[i]; + + switch (c) { + case HDLC_FRAME: + if (bg->rx_buffer_len) + hdlc_rx_frame(bg); + + bg->rx_buffer_len = 0; + break; + case HDLC_ESC: + bg->rx_in_esc = true; + break; + default: + if (bg->rx_in_esc) { + c ^= 0x20; + bg->rx_in_esc = false; + } + + if (bg->rx_buffer_len < MAX_RX_HDLC) { + bg->rx_buffer[bg->rx_buffer_len] = c; + bg->rx_buffer_len++; + } else { + dev_err_ratelimited(&bg->sd->dev, "RX Buffer Overflow"); + bg->rx_buffer_len = 0; + } + } + } + + return count; +} + +static int hdlc_init(struct gb_beagleplay *bg) +{ + INIT_WORK(&bg->tx_work, hdlc_transmit); + spin_lock_init(&bg->tx_producer_lock); + spin_lock_init(&bg->tx_consumer_lock); + bg->tx_circ_buf.head = 0; + bg->tx_circ_buf.tail = 0; + + bg->tx_circ_buf.buf = devm_kmalloc(&bg->sd->dev, TX_CIRC_BUF_SIZE, GFP_KERNEL); + if (!bg->tx_circ_buf.buf) + return -ENOMEM; + + bg->rx_buffer_len = 0; + bg->rx_in_esc = false; + + return 0; +} + +static void hdlc_deinit(struct gb_beagleplay *bg) +{ + flush_work(&bg->tx_work); +} + +static int gb_tty_receive(struct serdev_device *sd, const unsigned char *data, size_t count) +{ + struct gb_beagleplay *bg = serdev_device_get_drvdata(sd); + + return hdlc_rx(bg, data, count); +} + +static void gb_tty_wakeup(struct serdev_device *serdev) +{ + struct gb_beagleplay *bg = serdev_device_get_drvdata(serdev); + + schedule_work(&bg->tx_work); +} + +static struct serdev_device_ops gb_beagleplay_ops = { + .receive_buf = gb_tty_receive, + .write_wakeup = gb_tty_wakeup, +}; + +static int gb_message_send(struct gb_host_device *hd, u16 cport, struct gb_message *msg, gfp_t mask) +{ + struct gb_beagleplay *bg = dev_get_drvdata(&hd->dev); + struct hdlc_payload payloads[2]; + + dev_dbg(&hd->dev, "Sending greybus message with Operation %u, Type: %X on Cport %u", + msg->header->operation_id, msg->header->type, cport); + + if (msg->header->size > RX_HDLC_PAYLOAD) + return dev_err_probe(&hd->dev, -E2BIG, "Greybus message too big"); + + memcpy(msg->header->pad, &cport, sizeof(cport)); + + payloads[0].buf = msg->header; + payloads[0].len = sizeof(*msg->header); + payloads[1].buf = msg->payload; + payloads[1].len = msg->payload_size; + + hdlc_tx_frames(bg, ADDRESS_GREYBUS, 0x03, payloads, 2); + greybus_message_sent(bg->gb_hd, msg, 0); + + return 0; +} + +static void gb_message_cancel(struct gb_message *message) +{ +} + +static struct gb_hd_driver gb_hdlc_driver = { .message_send = gb_message_send, + .message_cancel = gb_message_cancel }; + +static void gb_beagleplay_start_svc(struct gb_beagleplay *bg) +{ + const u8 command = CONTROL_SVC_START; + const struct hdlc_payload payload = { .len = 1, .buf = (void *)&command }; + + hdlc_tx_frames(bg, ADDRESS_CONTROL, 0x03, &payload, 1); +} + +static void gb_beagleplay_stop_svc(struct gb_beagleplay *bg) +{ + const u8 command = CONTROL_SVC_STOP; + const struct hdlc_payload payload = { .len = 1, .buf = (void *)&command }; + + hdlc_tx_frames(bg, ADDRESS_CONTROL, 0x03, &payload, 1); +} + +static void gb_greybus_deinit(struct gb_beagleplay *bg) +{ + gb_hd_del(bg->gb_hd); + gb_hd_put(bg->gb_hd); +} + +static int gb_greybus_init(struct gb_beagleplay *bg) +{ + int ret; + + bg->gb_hd = gb_hd_create(&gb_hdlc_driver, &bg->sd->dev, TX_CIRC_BUF_SIZE, GB_MAX_CPORTS); + if (IS_ERR(bg->gb_hd)) { + dev_err(&bg->sd->dev, "Failed to create greybus host device"); + return PTR_ERR(bg->gb_hd); + } + + ret = gb_hd_add(bg->gb_hd); + if (ret) { + dev_err(&bg->sd->dev, "Failed to add greybus host device"); + goto free_gb_hd; + } + dev_set_drvdata(&bg->gb_hd->dev, bg); + + return 0; + +free_gb_hd: + gb_greybus_deinit(bg); + return ret; +} + +static void gb_serdev_deinit(struct gb_beagleplay *bg) +{ + serdev_device_close(bg->sd); +} + +static int gb_serdev_init(struct gb_beagleplay *bg) +{ + int ret; + + serdev_device_set_drvdata(bg->sd, bg); + serdev_device_set_client_ops(bg->sd, &gb_beagleplay_ops); + ret = serdev_device_open(bg->sd); + if (ret) + return dev_err_probe(&bg->sd->dev, ret, "Unable to open serial device"); + + serdev_device_set_baudrate(bg->sd, 115200); + serdev_device_set_flow_control(bg->sd, false); + + return 0; +} + +static int gb_beagleplay_probe(struct serdev_device *serdev) +{ + int ret = 0; + struct gb_beagleplay *bg; + + bg = devm_kmalloc(&serdev->dev, sizeof(*bg), GFP_KERNEL); + if (!bg) + return -ENOMEM; + + bg->sd = serdev; + ret = gb_serdev_init(bg); + if (ret) + return ret; + + ret = hdlc_init(bg); + if (ret) + goto free_serdev; + + ret = gb_greybus_init(bg); + if (ret) + goto free_hdlc; + + gb_beagleplay_start_svc(bg); + + return 0; + +free_hdlc: + hdlc_deinit(bg); +free_serdev: + gb_serdev_deinit(bg); + return ret; +} + +static void gb_beagleplay_remove(struct serdev_device *serdev) +{ + struct gb_beagleplay *bg = serdev_device_get_drvdata(serdev); + + gb_greybus_deinit(bg); + gb_beagleplay_stop_svc(bg); + hdlc_deinit(bg); + gb_serdev_deinit(bg); +} + +static const struct of_device_id gb_beagleplay_of_match[] = { + { + .compatible = "ti,cc1352p7", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, gb_beagleplay_of_match); + +static struct serdev_device_driver gb_beagleplay_driver = { + .probe = gb_beagleplay_probe, + .remove = gb_beagleplay_remove, + .driver = { + .name = "gb_beagleplay", + .of_match_table = gb_beagleplay_of_match, + }, +}; + +module_serdev_device_driver(gb_beagleplay_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Ayush Singh <ayushdevel1325@gmail.com>"); +MODULE_DESCRIPTION("A Greybus driver for BeaglePlay"); diff --git a/drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_desc.c b/drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_desc.c index 8716a05950c8..ef1f9be8b893 100644 --- a/drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_desc.c +++ b/drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_desc.c @@ -257,6 +257,13 @@ static u8 get_input_report(u8 current_index, int sensor_idx, int report_id, else als_input.illuminance_value = (int)sensor_virt_addr[0] / AMD_SFH_FW_MULTIPLIER; + + if (sensor_idx == ACS_IDX) { + als_input.light_color_temp = sensor_virt_addr[1]; + als_input.chromaticity_x_value = sensor_virt_addr[2]; + als_input.chromaticity_y_value = sensor_virt_addr[3]; + } + report_size = sizeof(als_input); memcpy(input_report, &als_input, sizeof(als_input)); break; diff --git a/drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_desc.h b/drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_desc.h index ebd55675eb62..882434b1501f 100644 --- a/drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_desc.h +++ b/drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_desc.h @@ -99,6 +99,9 @@ struct als_input_report { struct common_input_property common_property; /* values specific to this sensor */ int illuminance_value; + int light_color_temp; + int chromaticity_x_value; + int chromaticity_y_value; } __packed; struct hpd_feature_report { diff --git a/drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_report_desc.h b/drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_report_desc.h index 697f2791ea9c..67ec2d6a417d 100644 --- a/drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_report_desc.h +++ b/drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_report_desc.h @@ -641,6 +641,27 @@ static const u8 als_report_descriptor[] = { 0x75, 32, /* HID report size(32) */ 0x95, 1, /* HID report count (1) */ 0X81, 0x02, /* HID Input (Data_Arr_Abs) */ +0x0A, 0xD2, 0x04, /* HID usage sensor data light temperature */ +0x17, 0x00, 0x00, 0x01, 0x80, /* HID logical Min_32 */ +0x27, 0xFF, 0xFF, 0xFF, 0x7F, /* HID logical Max_32 */ +0x55, 0x0, /* HID unit exponent(0x0) */ +0x75, 32, /* HID report size(32) */ +0x95, 1, /* HID report count (1) */ +0X81, 0x02, /* HID Input (Data_Arr_Abs) */ +0x0A, 0xD4, 0x04, /* HID usage sensor data light chromaticity_x */ +0x17, 0x00, 0x00, 0x01, 0x80, /* HID logical Min_32 */ +0x27, 0xFF, 0xFF, 0xFF, 0x7F, /* HID logical Max_32 */ +0x55, 0x0, /* HID unit exponent(0x0) */ +0x75, 32, /* HID report size(32) */ +0x95, 1, /* HID report count(1) */ +0X81, 0x02, /* HID Input (Data_Var_Abs) */ +0x0A, 0xD5, 0x04, /* HID usage sensor data light chromaticity_y */ +0x17, 0x00, 0x00, 0x01, 0x80, /* HID logical Min_32 */ +0x27, 0xFF, 0xFF, 0xFF, 0x7F, /* HID logical Max_32 */ +0x55, 0x0, /* HID unit exponent(0x0) */ +0x75, 32, /* HID report size(32) */ +0x95, 1, /* HID report count (1) */ +0X81, 0x02, /* HID Input (Data_Var_Abs) */ 0xC0 /* HID end collection */ }; diff --git a/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_desc.c b/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_desc.c index 06bdcf072d10..8a037de08e92 100644 --- a/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_desc.c +++ b/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_desc.c @@ -188,6 +188,7 @@ static u8 get_input_rep(u8 current_index, int sensor_idx, int report_id, struct sfh_mag_data mag_data; struct sfh_als_data als_data; struct hpd_status hpdstatus; + struct sfh_base_info binfo; void __iomem *sensoraddr; u8 report_size = 0; @@ -235,6 +236,14 @@ static u8 get_input_rep(u8 current_index, int sensor_idx, int report_id, memcpy_fromio(&als_data, sensoraddr, sizeof(struct sfh_als_data)); get_common_inputs(&als_input.common_property, report_id); als_input.illuminance_value = float_to_int(als_data.lux); + + memcpy_fromio(&binfo, mp2->vsbase, sizeof(struct sfh_base_info)); + if (binfo.sbase.s_prop[ALS_IDX].sf.feat & 0x2) { + als_input.light_color_temp = als_data.light_color_temp; + als_input.chromaticity_x_value = float_to_int(als_data.chromaticity_x); + als_input.chromaticity_y_value = float_to_int(als_data.chromaticity_y); + } + report_size = sizeof(als_input); memcpy(input_report, &als_input, sizeof(als_input)); break; diff --git a/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_interface.h b/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_interface.h index 9d31d5b510eb..656c3e95ef8c 100644 --- a/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_interface.h +++ b/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_interface.h @@ -88,6 +88,16 @@ struct sfh_sensor_list { }; }; +struct sfh_sensor_prop { + union { + u32 sprop; + struct { + u32 elist : 16; + u32 feat : 16; + } sf; + }; +}; + struct sfh_base_info { union { u32 sfh_base[24]; @@ -95,6 +105,8 @@ struct sfh_base_info { struct sfh_platform_info plat_info; struct sfh_firmware_info fw_info; struct sfh_sensor_list s_list; + u32 rsvd; + struct sfh_sensor_prop s_prop[16]; } sbase; }; }; @@ -134,6 +146,9 @@ struct sfh_mag_data { struct sfh_als_data { struct sfh_common_data commondata; u32 lux; + u32 light_color_temp; + u32 chromaticity_x; + u32 chromaticity_y; }; struct hpd_status { diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index b6b45d359f28..f113dae59048 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -418,8 +418,9 @@ config IIO_KX022A_SPI select IIO_KX022A select REGMAP_SPI help - Enable support for the Kionix KX022A digital tri-axis - accelerometer connected to I2C interface. + Enable support for the Kionix digital tri-axis accelerometers + connected to SPI interface. Supported devices are: + KX022A, KX132-1211, KX132ACR-LBZ config IIO_KX022A_I2C tristate "Kionix KX022A tri-axis digital accelerometer I2C interface" @@ -427,8 +428,9 @@ config IIO_KX022A_I2C select IIO_KX022A select REGMAP_I2C help - Enable support for the Kionix KX022A digital tri-axis - accelerometer connected to I2C interface. + Enable support for the Kionix digital tri-axis accelerometers + connected to I2C interface. Supported devices are: + KX022A, KX132-1211, KX132ACR-LBZ config KXSD9 tristate "Kionix KXSD9 Accelerometer Driver" diff --git a/drivers/iio/accel/adxl345.h b/drivers/iio/accel/adxl345.h index d7e67cb08538..284bd387ce69 100644 --- a/drivers/iio/accel/adxl345.h +++ b/drivers/iio/accel/adxl345.h @@ -8,9 +8,24 @@ #ifndef _ADXL345_H_ #define _ADXL345_H_ -enum adxl345_device_type { - ADXL345 = 1, - ADXL375 = 2, +/* + * In full-resolution mode, scale factor is maintained at ~4 mg/LSB + * in all g ranges. + * + * At +/- 16g with 13-bit resolution, scale is computed as: + * (16 + 16) * 9.81 / (2^13 - 1) = 0.0383 + */ +#define ADXL345_USCALE 38300 + +/* + * The Datasheet lists a resolution of Resolution is ~49 mg per LSB. That's + * ~480mm/s**2 per LSB. + */ +#define ADXL375_USCALE 480000 + +struct adxl345_chip_info { + const char *name; + int uscale; }; int adxl345_core_probe(struct device *dev, struct regmap *regmap); diff --git a/drivers/iio/accel/adxl345_core.c b/drivers/iio/accel/adxl345_core.c index 1919e0089c11..8bd30a23ed3b 100644 --- a/drivers/iio/accel/adxl345_core.c +++ b/drivers/iio/accel/adxl345_core.c @@ -45,25 +45,10 @@ #define ADXL345_DEVID 0xE5 -/* - * In full-resolution mode, scale factor is maintained at ~4 mg/LSB - * in all g ranges. - * - * At +/- 16g with 13-bit resolution, scale is computed as: - * (16 + 16) * 9.81 / (2^13 - 1) = 0.0383 - */ -static const int adxl345_uscale = 38300; - -/* - * The Datasheet lists a resolution of Resolution is ~49 mg per LSB. That's - * ~480mm/s**2 per LSB. - */ -static const int adxl375_uscale = 480000; - struct adxl345_data { + const struct adxl345_chip_info *info; struct regmap *regmap; u8 data_range; - enum adxl345_device_type type; }; #define ADXL345_CHANNEL(index, axis) { \ @@ -110,15 +95,7 @@ static int adxl345_read_raw(struct iio_dev *indio_dev, return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: *val = 0; - switch (data->type) { - case ADXL345: - *val2 = adxl345_uscale; - break; - case ADXL375: - *val2 = adxl375_uscale; - break; - } - + *val2 = data->info->uscale; return IIO_VAL_INT_PLUS_MICRO; case IIO_CHAN_INFO_CALIBBIAS: ret = regmap_read(data->regmap, @@ -222,25 +199,11 @@ static void adxl345_powerdown(void *regmap) int adxl345_core_probe(struct device *dev, struct regmap *regmap) { - enum adxl345_device_type type; struct adxl345_data *data; struct iio_dev *indio_dev; - const char *name; u32 regval; int ret; - type = (uintptr_t)device_get_match_data(dev); - switch (type) { - case ADXL345: - name = "adxl345"; - break; - case ADXL375: - name = "adxl375"; - break; - default: - return -EINVAL; - } - ret = regmap_read(regmap, ADXL345_REG_DEVID, ®val); if (ret < 0) return dev_err_probe(dev, ret, "Error reading device ID\n"); @@ -255,16 +218,18 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap) data = iio_priv(indio_dev); data->regmap = regmap; - data->type = type; /* Enable full-resolution mode */ data->data_range = ADXL345_DATA_FORMAT_FULL_RES; + data->info = device_get_match_data(dev); + if (!data->info) + return -ENODEV; ret = regmap_write(data->regmap, ADXL345_REG_DATA_FORMAT, data->data_range); if (ret < 0) return dev_err_probe(dev, ret, "Failed to set data range\n"); - indio_dev->name = name; + indio_dev->name = data->info->name; indio_dev->info = &adxl345_info; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->channels = adxl345_channels; diff --git a/drivers/iio/accel/adxl345_i2c.c b/drivers/iio/accel/adxl345_i2c.c index e47d12f19602..a3084b0a8f78 100644 --- a/drivers/iio/accel/adxl345_i2c.c +++ b/drivers/iio/accel/adxl345_i2c.c @@ -30,22 +30,32 @@ static int adxl345_i2c_probe(struct i2c_client *client) return adxl345_core_probe(&client->dev, regmap); } +static const struct adxl345_chip_info adxl345_i2c_info = { + .name = "adxl345", + .uscale = ADXL345_USCALE, +}; + +static const struct adxl345_chip_info adxl375_i2c_info = { + .name = "adxl375", + .uscale = ADXL375_USCALE, +}; + static const struct i2c_device_id adxl345_i2c_id[] = { - { "adxl345", ADXL345 }, - { "adxl375", ADXL375 }, + { "adxl345", (kernel_ulong_t)&adxl345_i2c_info }, + { "adxl375", (kernel_ulong_t)&adxl375_i2c_info }, { } }; MODULE_DEVICE_TABLE(i2c, adxl345_i2c_id); static const struct of_device_id adxl345_of_match[] = { - { .compatible = "adi,adxl345", .data = (const void *)ADXL345 }, - { .compatible = "adi,adxl375", .data = (const void *)ADXL375 }, + { .compatible = "adi,adxl345", .data = &adxl345_i2c_info }, + { .compatible = "adi,adxl375", .data = &adxl375_i2c_info }, { } }; MODULE_DEVICE_TABLE(of, adxl345_of_match); static const struct acpi_device_id adxl345_acpi_match[] = { - { "ADS0345", ADXL345 }, + { "ADS0345", (kernel_ulong_t)&adxl345_i2c_info }, { } }; MODULE_DEVICE_TABLE(acpi, adxl345_acpi_match); diff --git a/drivers/iio/accel/adxl345_spi.c b/drivers/iio/accel/adxl345_spi.c index aaade5808657..93ca349f1780 100644 --- a/drivers/iio/accel/adxl345_spi.c +++ b/drivers/iio/accel/adxl345_spi.c @@ -36,22 +36,32 @@ static int adxl345_spi_probe(struct spi_device *spi) return adxl345_core_probe(&spi->dev, regmap); } +static const struct adxl345_chip_info adxl345_spi_info = { + .name = "adxl345", + .uscale = ADXL345_USCALE, +}; + +static const struct adxl345_chip_info adxl375_spi_info = { + .name = "adxl375", + .uscale = ADXL375_USCALE, +}; + static const struct spi_device_id adxl345_spi_id[] = { - { "adxl345", ADXL345 }, - { "adxl375", ADXL375 }, + { "adxl345", (kernel_ulong_t)&adxl345_spi_info }, + { "adxl375", (kernel_ulong_t)&adxl375_spi_info }, { } }; MODULE_DEVICE_TABLE(spi, adxl345_spi_id); static const struct of_device_id adxl345_of_match[] = { - { .compatible = "adi,adxl345", .data = (const void *)ADXL345 }, - { .compatible = "adi,adxl375", .data = (const void *)ADXL375 }, + { .compatible = "adi,adxl345", .data = &adxl345_spi_info }, + { .compatible = "adi,adxl375", .data = &adxl375_spi_info }, { } }; MODULE_DEVICE_TABLE(of, adxl345_of_match); static const struct acpi_device_id adxl345_acpi_match[] = { - { "ADS0345", ADXL345 }, + { "ADS0345", (kernel_ulong_t)&adxl345_spi_info }, { } }; MODULE_DEVICE_TABLE(acpi, adxl345_acpi_match); diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c index 13439f52d26d..ab4fccb24b6c 100644 --- a/drivers/iio/accel/bma180.c +++ b/drivers/iio/accel/bma180.c @@ -926,7 +926,6 @@ static int bma180_probe(struct i2c_client *client) struct device *dev = &client->dev; struct bma180_data *data; struct iio_dev *indio_dev; - enum chip_ids chip; int ret; indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); @@ -936,11 +935,7 @@ static int bma180_probe(struct i2c_client *client) data = iio_priv(indio_dev); i2c_set_clientdata(client, indio_dev); data->client = client; - if (client->dev.of_node) - chip = (uintptr_t)of_device_get_match_data(dev); - else - chip = id->driver_data; - data->part_info = &bma180_part_info[chip]; + data->part_info = i2c_get_match_data(client); ret = iio_read_mount_matrix(dev, &data->orientation); if (ret) @@ -1092,11 +1087,11 @@ static int bma180_resume(struct device *dev) static DEFINE_SIMPLE_DEV_PM_OPS(bma180_pm_ops, bma180_suspend, bma180_resume); static const struct i2c_device_id bma180_ids[] = { - { "bma023", BMA023 }, - { "bma150", BMA150 }, - { "bma180", BMA180 }, - { "bma250", BMA250 }, - { "smb380", BMA150 }, + { "bma023", (kernel_ulong_t)&bma180_part_info[BMA023] }, + { "bma150", (kernel_ulong_t)&bma180_part_info[BMA150] }, + { "bma180", (kernel_ulong_t)&bma180_part_info[BMA180] }, + { "bma250", (kernel_ulong_t)&bma180_part_info[BMA250] }, + { "smb380", (kernel_ulong_t)&bma180_part_info[BMA150] }, { } }; @@ -1105,23 +1100,23 @@ MODULE_DEVICE_TABLE(i2c, bma180_ids); static const struct of_device_id bma180_of_match[] = { { .compatible = "bosch,bma023", - .data = (void *)BMA023 + .data = &bma180_part_info[BMA023] }, { .compatible = "bosch,bma150", - .data = (void *)BMA150 + .data = &bma180_part_info[BMA150] }, { .compatible = "bosch,bma180", - .data = (void *)BMA180 + .data = &bma180_part_info[BMA180] }, { .compatible = "bosch,bma250", - .data = (void *)BMA250 + .data = &bma180_part_info[BMA250] }, { .compatible = "bosch,smb380", - .data = (void *)BMA150 + .data = &bma180_part_info[BMA150] }, { } }; diff --git a/drivers/iio/accel/fxls8962af.h b/drivers/iio/accel/fxls8962af.h index 9cbe98c3ba9a..6eaa2803b26f 100644 --- a/drivers/iio/accel/fxls8962af.h +++ b/drivers/iio/accel/fxls8962af.h @@ -14,7 +14,6 @@ enum { }; int fxls8962af_core_probe(struct device *dev, struct regmap *regmap, int irq); -int fxls8962af_core_remove(struct device *dev); extern const struct dev_pm_ops fxls8962af_pm_ops; extern const struct regmap_config fxls8962af_i2c_regmap_conf; diff --git a/drivers/iio/accel/hid-sensor-accel-3d.c b/drivers/iio/accel/hid-sensor-accel-3d.c index 5eac7ea19993..9b7a73a4c48a 100644 --- a/drivers/iio/accel/hid-sensor-accel-3d.c +++ b/drivers/iio/accel/hid-sensor-accel-3d.c @@ -422,7 +422,7 @@ error_remove_trigger: } /* Function to deinitialize the processing for usage id */ -static int hid_accel_3d_remove(struct platform_device *pdev) +static void hid_accel_3d_remove(struct platform_device *pdev) { struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; struct iio_dev *indio_dev = platform_get_drvdata(pdev); @@ -431,8 +431,6 @@ static int hid_accel_3d_remove(struct platform_device *pdev) sensor_hub_remove_callback(hsdev, hsdev->usage); iio_device_unregister(indio_dev); hid_sensor_remove_trigger(indio_dev, &accel_state->common_attributes); - - return 0; } static const struct platform_device_id hid_accel_3d_ids[] = { @@ -454,7 +452,7 @@ static struct platform_driver hid_accel_3d_platform_driver = { .pm = &hid_sensor_pm_ops, }, .probe = hid_accel_3d_probe, - .remove = hid_accel_3d_remove, + .remove_new = hid_accel_3d_remove, }; module_platform_driver(hid_accel_3d_platform_driver); diff --git a/drivers/iio/accel/kionix-kx022a-i2c.c b/drivers/iio/accel/kionix-kx022a-i2c.c index b0ac78e85dad..8a1d4fc28ddd 100644 --- a/drivers/iio/accel/kionix-kx022a-i2c.c +++ b/drivers/iio/accel/kionix-kx022a-i2c.c @@ -2,7 +2,7 @@ /* * Copyright (C) 2022 ROHM Semiconductors * - * ROHM/KIONIX KX022A accelerometer driver + * ROHM/KIONIX accelerometer driver */ #include <linux/i2c.h> @@ -15,6 +15,7 @@ static int kx022a_i2c_probe(struct i2c_client *i2c) { struct device *dev = &i2c->dev; + const struct kx022a_chip_info *chip_info; struct regmap *regmap; if (!i2c->irq) { @@ -22,16 +23,30 @@ static int kx022a_i2c_probe(struct i2c_client *i2c) return -EINVAL; } - regmap = devm_regmap_init_i2c(i2c, &kx022a_regmap); + chip_info = i2c_get_match_data(i2c); + if (!chip_info) + return -EINVAL; + + regmap = devm_regmap_init_i2c(i2c, chip_info->regmap_config); if (IS_ERR(regmap)) return dev_err_probe(dev, PTR_ERR(regmap), "Failed to initialize Regmap\n"); - return kx022a_probe_internal(dev); + return kx022a_probe_internal(dev, chip_info); } +static const struct i2c_device_id kx022a_i2c_id[] = { + { .name = "kx022a", .driver_data = (kernel_ulong_t)&kx022a_chip_info }, + { .name = "kx132-1211", .driver_data = (kernel_ulong_t)&kx132_chip_info }, + { .name = "kx132acr-lbz", .driver_data = (kernel_ulong_t)&kx132acr_chip_info }, + { } +}; +MODULE_DEVICE_TABLE(i2c, kx022a_i2c_id); + static const struct of_device_id kx022a_of_match[] = { - { .compatible = "kionix,kx022a", }, + { .compatible = "kionix,kx022a", .data = &kx022a_chip_info }, + { .compatible = "kionix,kx132-1211", .data = &kx132_chip_info }, + { .compatible = "rohm,kx132acr-lbz", .data = &kx132acr_chip_info }, { } }; MODULE_DEVICE_TABLE(of, kx022a_of_match); @@ -43,6 +58,7 @@ static struct i2c_driver kx022a_i2c_driver = { .probe_type = PROBE_PREFER_ASYNCHRONOUS, }, .probe = kx022a_i2c_probe, + .id_table = kx022a_i2c_id, }; module_i2c_driver(kx022a_i2c_driver); diff --git a/drivers/iio/accel/kionix-kx022a-spi.c b/drivers/iio/accel/kionix-kx022a-spi.c index f45a46899a5f..f798b964d0b5 100644 --- a/drivers/iio/accel/kionix-kx022a-spi.c +++ b/drivers/iio/accel/kionix-kx022a-spi.c @@ -2,7 +2,7 @@ /* * Copyright (C) 2022 ROHM Semiconductors * - * ROHM/KIONIX KX022A accelerometer driver + * ROHM/KIONIX accelerometer driver */ #include <linux/interrupt.h> @@ -15,6 +15,7 @@ static int kx022a_spi_probe(struct spi_device *spi) { struct device *dev = &spi->dev; + const struct kx022a_chip_info *chip_info; struct regmap *regmap; if (!spi->irq) { @@ -22,22 +23,30 @@ static int kx022a_spi_probe(struct spi_device *spi) return -EINVAL; } - regmap = devm_regmap_init_spi(spi, &kx022a_regmap); + chip_info = spi_get_device_match_data(spi); + if (!chip_info) + return -EINVAL; + + regmap = devm_regmap_init_spi(spi, chip_info->regmap_config); if (IS_ERR(regmap)) return dev_err_probe(dev, PTR_ERR(regmap), "Failed to initialize Regmap\n"); - return kx022a_probe_internal(dev); + return kx022a_probe_internal(dev, chip_info); } static const struct spi_device_id kx022a_id[] = { - { "kx022a" }, + { .name = "kx022a", .driver_data = (kernel_ulong_t)&kx022a_chip_info }, + { .name = "kx132-1211", .driver_data = (kernel_ulong_t)&kx132_chip_info }, + { .name = "kx132acr-lbz", .driver_data = (kernel_ulong_t)&kx132acr_chip_info }, { } }; MODULE_DEVICE_TABLE(spi, kx022a_id); static const struct of_device_id kx022a_of_match[] = { - { .compatible = "kionix,kx022a", }, + { .compatible = "kionix,kx022a", .data = &kx022a_chip_info }, + { .compatible = "kionix,kx132-1211", .data = &kx132_chip_info }, + { .compatible = "rohm,kx132acr-lbz", .data = &kx132acr_chip_info }, { } }; MODULE_DEVICE_TABLE(of, kx022a_of_match); diff --git a/drivers/iio/accel/kionix-kx022a.c b/drivers/iio/accel/kionix-kx022a.c index 4ea3c6718ed4..60864be3a667 100644 --- a/drivers/iio/accel/kionix-kx022a.c +++ b/drivers/iio/accel/kionix-kx022a.c @@ -2,7 +2,7 @@ /* * Copyright (C) 2022 ROHM Semiconductors * - * ROHM/KIONIX KX022A accelerometer driver + * ROHM/KIONIX accelerometer driver */ #include <linux/delay.h> @@ -15,7 +15,7 @@ #include <linux/regmap.h> #include <linux/regulator/consumer.h> #include <linux/slab.h> -#include <linux/string_helpers.h> +#include <linux/string_choices.h> #include <linux/units.h> #include <linux/iio/iio.h> @@ -48,7 +48,7 @@ enum { KX022A_STATE_FIFO, }; -/* Regmap configs */ +/* kx022a Regmap configs */ static const struct regmap_range kx022a_volatile_ranges[] = { { .range_min = KX022A_REG_XHP_L, @@ -138,7 +138,7 @@ static const struct regmap_access_table kx022a_nir_regs = { .n_yes_ranges = ARRAY_SIZE(kx022a_noinc_read_ranges), }; -const struct regmap_config kx022a_regmap = { +static const struct regmap_config kx022a_regmap_config = { .reg_bits = 8, .val_bits = 8, .volatile_table = &kx022a_volatile_regs, @@ -149,10 +149,121 @@ const struct regmap_config kx022a_regmap = { .max_register = KX022A_MAX_REGISTER, .cache_type = REGCACHE_RBTREE, }; -EXPORT_SYMBOL_NS_GPL(kx022a_regmap, IIO_KX022A); + +/* Regmap configs kx132 */ +static const struct regmap_range kx132_volatile_ranges[] = { + { + .range_min = KX132_REG_XADP_L, + .range_max = KX132_REG_COTR, + }, { + .range_min = KX132_REG_TSCP, + .range_max = KX132_REG_INT_REL, + }, { + /* The reset bit will be cleared by sensor */ + .range_min = KX132_REG_CNTL2, + .range_max = KX132_REG_CNTL2, + }, { + .range_min = KX132_REG_CNTL5, + .range_max = KX132_REG_CNTL5, + }, { + .range_min = KX132_REG_BUF_STATUS_1, + .range_max = KX132_REG_BUF_READ, + }, +}; + +static const struct regmap_access_table kx132_volatile_regs = { + .yes_ranges = &kx132_volatile_ranges[0], + .n_yes_ranges = ARRAY_SIZE(kx132_volatile_ranges), +}; + +static const struct regmap_range kx132_precious_ranges[] = { + { + .range_min = KX132_REG_INT_REL, + .range_max = KX132_REG_INT_REL, + }, +}; + +static const struct regmap_access_table kx132_precious_regs = { + .yes_ranges = &kx132_precious_ranges[0], + .n_yes_ranges = ARRAY_SIZE(kx132_precious_ranges), +}; + +static const struct regmap_range kx132_read_only_ranges[] = { + { + .range_min = KX132_REG_XADP_L, + .range_max = KX132_REG_INT_REL, + }, { + .range_min = KX132_REG_BUF_STATUS_1, + .range_max = KX132_REG_BUF_STATUS_2, + }, { + .range_min = KX132_REG_BUF_READ, + .range_max = KX132_REG_BUF_READ, + }, { + /* Kionix reserved registers: should not be written */ + .range_min = 0x28, + .range_max = 0x28, + }, { + .range_min = 0x35, + .range_max = 0x36, + }, { + .range_min = 0x3c, + .range_max = 0x48, + }, { + .range_min = 0x4e, + .range_max = 0x5c, + }, { + .range_min = 0x77, + .range_max = 0x7f, + }, +}; + +static const struct regmap_access_table kx132_ro_regs = { + .no_ranges = &kx132_read_only_ranges[0], + .n_no_ranges = ARRAY_SIZE(kx132_read_only_ranges), +}; + +static const struct regmap_range kx132_write_only_ranges[] = { + { + .range_min = KX132_REG_SELF_TEST, + .range_max = KX132_REG_SELF_TEST, + }, { + .range_min = KX132_REG_BUF_CLEAR, + .range_max = KX132_REG_BUF_CLEAR, + }, +}; + +static const struct regmap_access_table kx132_wo_regs = { + .no_ranges = &kx132_write_only_ranges[0], + .n_no_ranges = ARRAY_SIZE(kx132_write_only_ranges), +}; + +static const struct regmap_range kx132_noinc_read_ranges[] = { + { + .range_min = KX132_REG_BUF_READ, + .range_max = KX132_REG_BUF_READ, + }, +}; + +static const struct regmap_access_table kx132_nir_regs = { + .yes_ranges = &kx132_noinc_read_ranges[0], + .n_yes_ranges = ARRAY_SIZE(kx132_noinc_read_ranges), +}; + +static const struct regmap_config kx132_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .volatile_table = &kx132_volatile_regs, + .rd_table = &kx132_wo_regs, + .wr_table = &kx132_ro_regs, + .rd_noinc_table = &kx132_nir_regs, + .precious_table = &kx132_precious_regs, + .max_register = KX132_MAX_REGISTER, + .cache_type = REGCACHE_RBTREE, +}; struct kx022a_data { struct regmap *regmap; + const struct kx022a_chip_info *chip_info; struct iio_trigger *trig; struct device *dev; struct iio_mount_matrix orientation; @@ -175,6 +286,8 @@ struct kx022a_data { struct mutex mutex; u8 watermark; + __le16 *fifo_buffer; + /* 3 x 16bit accel data + timestamp */ __le16 buffer[8] __aligned(IIO_DMA_MINALIGN); struct { @@ -208,7 +321,7 @@ static const struct iio_chan_spec_ext_info kx022a_ext_info[] = { { } }; -#define KX022A_ACCEL_CHAN(axis, index) \ +#define KX022A_ACCEL_CHAN(axis, reg, index) \ { \ .type = IIO_ACCEL, \ .modified = 1, \ @@ -220,7 +333,7 @@ static const struct iio_chan_spec_ext_info kx022a_ext_info[] = { BIT(IIO_CHAN_INFO_SCALE) | \ BIT(IIO_CHAN_INFO_SAMP_FREQ), \ .ext_info = kx022a_ext_info, \ - .address = KX022A_REG_##axis##OUT_L, \ + .address = reg, \ .scan_index = index, \ .scan_type = { \ .sign = 's', \ @@ -231,9 +344,16 @@ static const struct iio_chan_spec_ext_info kx022a_ext_info[] = { } static const struct iio_chan_spec kx022a_channels[] = { - KX022A_ACCEL_CHAN(X, 0), - KX022A_ACCEL_CHAN(Y, 1), - KX022A_ACCEL_CHAN(Z, 2), + KX022A_ACCEL_CHAN(X, KX022A_REG_XOUT_L, 0), + KX022A_ACCEL_CHAN(Y, KX022A_REG_YOUT_L, 1), + KX022A_ACCEL_CHAN(Z, KX022A_REG_ZOUT_L, 2), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + +static const struct iio_chan_spec kx132_channels[] = { + KX022A_ACCEL_CHAN(X, KX132_REG_XOUT_L, 0), + KX022A_ACCEL_CHAN(Y, KX132_REG_YOUT_L, 1), + KX022A_ACCEL_CHAN(Z, KX132_REG_ZOUT_L, 2), IIO_CHAN_SOFT_TIMESTAMP(3), }; @@ -332,16 +452,15 @@ static int kx022a_turn_on_off_unlocked(struct kx022a_data *data, bool on) int ret; if (on) - ret = regmap_set_bits(data->regmap, KX022A_REG_CNTL, + ret = regmap_set_bits(data->regmap, data->chip_info->cntl, KX022A_MASK_PC1); else - ret = regmap_clear_bits(data->regmap, KX022A_REG_CNTL, + ret = regmap_clear_bits(data->regmap, data->chip_info->cntl, KX022A_MASK_PC1); if (ret) dev_err(data->dev, "Turn %s fail %d\n", str_on_off(on), ret); return ret; - } static int kx022a_turn_off_lock(struct kx022a_data *data) @@ -403,7 +522,7 @@ static int kx022a_write_raw(struct iio_dev *idev, break; ret = regmap_update_bits(data->regmap, - KX022A_REG_ODCNTL, + data->chip_info->odcntl, KX022A_MASK_ODR, n); data->odr_ns = kx022a_odrs[n]; kx022a_turn_on_unlock(data); @@ -424,7 +543,7 @@ static int kx022a_write_raw(struct iio_dev *idev, if (ret) break; - ret = regmap_update_bits(data->regmap, KX022A_REG_CNTL, + ret = regmap_update_bits(data->regmap, data->chip_info->cntl, KX022A_MASK_GSEL, n << KX022A_GSEL_SHIFT); kx022a_turn_on_unlock(data); @@ -446,7 +565,7 @@ static int kx022a_fifo_set_wmi(struct kx022a_data *data) threshold = data->watermark; - return regmap_update_bits(data->regmap, KX022A_REG_BUF_CNTL1, + return regmap_update_bits(data->regmap, data->chip_info->buf_cntl1, KX022A_MASK_WM_TH, threshold); } @@ -489,7 +608,7 @@ static int kx022a_read_raw(struct iio_dev *idev, return ret; case IIO_CHAN_INFO_SAMP_FREQ: - ret = regmap_read(data->regmap, KX022A_REG_ODCNTL, ®val); + ret = regmap_read(data->regmap, data->chip_info->odcntl, ®val); if (ret) return ret; @@ -504,7 +623,7 @@ static int kx022a_read_raw(struct iio_dev *idev, return IIO_VAL_INT_PLUS_MICRO; case IIO_CHAN_INFO_SCALE: - ret = regmap_read(data->regmap, KX022A_REG_CNTL, ®val); + ret = regmap_read(data->regmap, data->chip_info->cntl, ®val); if (ret < 0) return ret; @@ -520,8 +639,7 @@ static int kx022a_set_watermark(struct iio_dev *idev, unsigned int val) { struct kx022a_data *data = iio_priv(idev); - if (val > KX022A_FIFO_LENGTH) - val = KX022A_FIFO_LENGTH; + val = min(data->chip_info->fifo_length, val); mutex_lock(&data->mutex); data->watermark = val; @@ -582,30 +700,56 @@ static int kx022a_drop_fifo_contents(struct kx022a_data *data) */ data->timestamp = 0; - return regmap_write(data->regmap, KX022A_REG_BUF_CLEAR, 0x0); + return regmap_write(data->regmap, data->chip_info->buf_clear, 0x0); +} + +static int kx022a_get_fifo_bytes_available(struct kx022a_data *data) +{ + int ret, fifo_bytes; + + ret = regmap_read(data->regmap, KX022A_REG_BUF_STATUS_1, &fifo_bytes); + if (ret) { + dev_err(data->dev, "Error reading buffer status\n"); + return ret; + } + + if (fifo_bytes == KX022A_FIFO_FULL_VALUE) + return KX022A_FIFO_MAX_BYTES; + + return fifo_bytes; +} + +static int kx132_get_fifo_bytes_available(struct kx022a_data *data) +{ + __le16 buf_status; + int ret, fifo_bytes; + + ret = regmap_bulk_read(data->regmap, data->chip_info->buf_status1, + &buf_status, sizeof(buf_status)); + if (ret) { + dev_err(data->dev, "Error reading buffer status\n"); + return ret; + } + + fifo_bytes = le16_to_cpu(buf_status); + fifo_bytes &= data->chip_info->buf_smp_lvl_mask; + fifo_bytes = min((unsigned int)fifo_bytes, data->chip_info->fifo_length * + KX022A_FIFO_SAMPLES_SIZE_BYTES); + + return fifo_bytes; } static int __kx022a_fifo_flush(struct iio_dev *idev, unsigned int samples, bool irq) { struct kx022a_data *data = iio_priv(idev); - struct device *dev = regmap_get_device(data->regmap); - __le16 buffer[KX022A_FIFO_LENGTH * 3]; uint64_t sample_period; int count, fifo_bytes; bool renable = false; int64_t tstamp; int ret, i; - ret = regmap_read(data->regmap, KX022A_REG_BUF_STATUS_1, &fifo_bytes); - if (ret) { - dev_err(dev, "Error reading buffer status\n"); - return ret; - } - - /* Let's not overflow if we for some reason get bogus value from i2c */ - if (fifo_bytes == KX022A_FIFO_FULL_VALUE) - fifo_bytes = KX022A_FIFO_MAX_BYTES; + fifo_bytes = data->chip_info->get_fifo_bytes_available(data); if (fifo_bytes % KX022A_FIFO_SAMPLES_SIZE_BYTES) dev_warn(data->dev, "Bad FIFO alignment. Data may be corrupt\n"); @@ -669,13 +813,13 @@ static int __kx022a_fifo_flush(struct iio_dev *idev, unsigned int samples, } fifo_bytes = count * KX022A_FIFO_SAMPLES_SIZE_BYTES; - ret = regmap_noinc_read(data->regmap, KX022A_REG_BUF_READ, - &buffer[0], fifo_bytes); + ret = regmap_noinc_read(data->regmap, data->chip_info->buf_read, + data->fifo_buffer, fifo_bytes); if (ret) goto renable_out; for (i = 0; i < count; i++) { - __le16 *sam = &buffer[i * 3]; + __le16 *sam = &data->fifo_buffer[i * 3]; __le16 *chs; int bit; @@ -722,10 +866,10 @@ static const struct iio_info kx022a_info = { static int kx022a_set_drdy_irq(struct kx022a_data *data, bool en) { if (en) - return regmap_set_bits(data->regmap, KX022A_REG_CNTL, + return regmap_set_bits(data->regmap, data->chip_info->cntl, KX022A_MASK_DRDY); - return regmap_clear_bits(data->regmap, KX022A_REG_CNTL, + return regmap_clear_bits(data->regmap, data->chip_info->cntl, KX022A_MASK_DRDY); } @@ -760,7 +904,7 @@ static int kx022a_fifo_disable(struct kx022a_data *data) if (ret) goto unlock_out; - ret = regmap_clear_bits(data->regmap, KX022A_REG_BUF_CNTL2, + ret = regmap_clear_bits(data->regmap, data->chip_info->buf_cntl2, KX022A_MASK_BUF_EN); if (ret) goto unlock_out; @@ -769,6 +913,8 @@ static int kx022a_fifo_disable(struct kx022a_data *data) kx022a_drop_fifo_contents(data); + kfree(data->fifo_buffer); + return kx022a_turn_on_unlock(data); unlock_out: @@ -791,6 +937,12 @@ static int kx022a_fifo_enable(struct kx022a_data *data) { int ret; + data->fifo_buffer = kmalloc_array(data->chip_info->fifo_length, + KX022A_FIFO_SAMPLES_SIZE_BYTES, + GFP_KERNEL); + if (!data->fifo_buffer) + return -ENOMEM; + ret = kx022a_turn_off_lock(data); if (ret) return ret; @@ -801,7 +953,7 @@ static int kx022a_fifo_enable(struct kx022a_data *data) goto unlock_out; /* Enable buffer */ - ret = regmap_set_bits(data->regmap, KX022A_REG_BUF_CNTL2, + ret = regmap_set_bits(data->regmap, data->chip_info->buf_cntl2, KX022A_MASK_BUF_EN); if (ret) goto unlock_out; @@ -847,7 +999,7 @@ static irqreturn_t kx022a_trigger_handler(int irq, void *p) struct kx022a_data *data = iio_priv(idev); int ret; - ret = regmap_bulk_read(data->regmap, KX022A_REG_XOUT_L, data->buffer, + ret = regmap_bulk_read(data->regmap, data->chip_info->xout_l, data->buffer, KX022A_FIFO_SAMPLES_SIZE_BYTES); if (ret < 0) goto err_read; @@ -895,7 +1047,7 @@ static irqreturn_t kx022a_irq_thread_handler(int irq, void *private) if (data->state & KX022A_STATE_FIFO) { int ok; - ok = __kx022a_fifo_flush(idev, KX022A_FIFO_LENGTH, true); + ok = __kx022a_fifo_flush(idev, data->chip_info->fifo_length, true); if (ok > 0) ret = IRQ_HANDLED; } @@ -948,7 +1100,7 @@ static int kx022a_chip_init(struct kx022a_data *data) int ret, val; /* Reset the senor */ - ret = regmap_write(data->regmap, KX022A_REG_CNTL2, KX022A_MASK_SRST); + ret = regmap_write(data->regmap, data->chip_info->cntl2, KX022A_MASK_SRST); if (ret) return ret; @@ -958,7 +1110,7 @@ static int kx022a_chip_init(struct kx022a_data *data) */ msleep(1); - ret = regmap_read_poll_timeout(data->regmap, KX022A_REG_CNTL2, val, + ret = regmap_read_poll_timeout(data->regmap, data->chip_info->cntl2, val, !(val & KX022A_MASK_SRST), KX022A_SOFT_RESET_WAIT_TIME_US, KX022A_SOFT_RESET_TOTAL_WAIT_TIME_US); @@ -968,14 +1120,14 @@ static int kx022a_chip_init(struct kx022a_data *data) return ret; } - ret = regmap_reinit_cache(data->regmap, &kx022a_regmap); + ret = regmap_reinit_cache(data->regmap, data->chip_info->regmap_config); if (ret) { dev_err(data->dev, "Failed to reinit reg cache\n"); return ret; } /* set data res 16bit */ - ret = regmap_set_bits(data->regmap, KX022A_REG_BUF_CNTL2, + ret = regmap_set_bits(data->regmap, data->chip_info->buf_cntl2, KX022A_MASK_BRES16); if (ret) { dev_err(data->dev, "Failed to set data resolution\n"); @@ -985,7 +1137,90 @@ static int kx022a_chip_init(struct kx022a_data *data) return kx022a_prepare_irq_pin(data); } -int kx022a_probe_internal(struct device *dev) +const struct kx022a_chip_info kx022a_chip_info = { + .name = "kx022-accel", + .regmap_config = &kx022a_regmap_config, + .channels = kx022a_channels, + .num_channels = ARRAY_SIZE(kx022a_channels), + .fifo_length = KX022A_FIFO_LENGTH, + .who = KX022A_REG_WHO, + .id = KX022A_ID, + .cntl = KX022A_REG_CNTL, + .cntl2 = KX022A_REG_CNTL2, + .odcntl = KX022A_REG_ODCNTL, + .buf_cntl1 = KX022A_REG_BUF_CNTL1, + .buf_cntl2 = KX022A_REG_BUF_CNTL2, + .buf_clear = KX022A_REG_BUF_CLEAR, + .buf_status1 = KX022A_REG_BUF_STATUS_1, + .buf_read = KX022A_REG_BUF_READ, + .inc1 = KX022A_REG_INC1, + .inc4 = KX022A_REG_INC4, + .inc5 = KX022A_REG_INC5, + .inc6 = KX022A_REG_INC6, + .xout_l = KX022A_REG_XOUT_L, + .get_fifo_bytes_available = kx022a_get_fifo_bytes_available, +}; +EXPORT_SYMBOL_NS_GPL(kx022a_chip_info, IIO_KX022A); + +const struct kx022a_chip_info kx132_chip_info = { + .name = "kx132-1211", + .regmap_config = &kx132_regmap_config, + .channels = kx132_channels, + .num_channels = ARRAY_SIZE(kx132_channels), + .fifo_length = KX132_FIFO_LENGTH, + .who = KX132_REG_WHO, + .id = KX132_ID, + .cntl = KX132_REG_CNTL, + .cntl2 = KX132_REG_CNTL2, + .odcntl = KX132_REG_ODCNTL, + .buf_cntl1 = KX132_REG_BUF_CNTL1, + .buf_cntl2 = KX132_REG_BUF_CNTL2, + .buf_clear = KX132_REG_BUF_CLEAR, + .buf_status1 = KX132_REG_BUF_STATUS_1, + .buf_smp_lvl_mask = KX132_MASK_BUF_SMP_LVL, + .buf_read = KX132_REG_BUF_READ, + .inc1 = KX132_REG_INC1, + .inc4 = KX132_REG_INC4, + .inc5 = KX132_REG_INC5, + .inc6 = KX132_REG_INC6, + .xout_l = KX132_REG_XOUT_L, + .get_fifo_bytes_available = kx132_get_fifo_bytes_available, +}; +EXPORT_SYMBOL_NS_GPL(kx132_chip_info, IIO_KX022A); + +/* + * Despite the naming, KX132ACR-LBZ is not similar to KX132-1211 but it is + * exact subset of KX022A. KX132ACR-LBZ is meant to be used for industrial + * applications and the tap/double tap, free fall and tilt engines were + * removed. Rest of the registers and functionalities (excluding the ID + * register) are exact match to what is found in KX022. + */ +const struct kx022a_chip_info kx132acr_chip_info = { + .name = "kx132acr-lbz", + .regmap_config = &kx022a_regmap_config, + .channels = kx022a_channels, + .num_channels = ARRAY_SIZE(kx022a_channels), + .fifo_length = KX022A_FIFO_LENGTH, + .who = KX022A_REG_WHO, + .id = KX132ACR_LBZ_ID, + .cntl = KX022A_REG_CNTL, + .cntl2 = KX022A_REG_CNTL2, + .odcntl = KX022A_REG_ODCNTL, + .buf_cntl1 = KX022A_REG_BUF_CNTL1, + .buf_cntl2 = KX022A_REG_BUF_CNTL2, + .buf_clear = KX022A_REG_BUF_CLEAR, + .buf_status1 = KX022A_REG_BUF_STATUS_1, + .buf_read = KX022A_REG_BUF_READ, + .inc1 = KX022A_REG_INC1, + .inc4 = KX022A_REG_INC4, + .inc5 = KX022A_REG_INC5, + .inc6 = KX022A_REG_INC6, + .xout_l = KX022A_REG_XOUT_L, + .get_fifo_bytes_available = kx022a_get_fifo_bytes_available, +}; +EXPORT_SYMBOL_NS_GPL(kx132acr_chip_info, IIO_KX022A); + +int kx022a_probe_internal(struct device *dev, const struct kx022a_chip_info *chip_info) { static const char * const regulator_names[] = {"io-vdd", "vdd"}; struct iio_trigger *indio_trig; @@ -1012,6 +1247,7 @@ int kx022a_probe_internal(struct device *dev) return -ENOMEM; data = iio_priv(idev); + data->chip_info = chip_info; /* * VDD is the analog and digital domain voltage supply and @@ -1022,26 +1258,24 @@ int kx022a_probe_internal(struct device *dev) if (ret && ret != -ENODEV) return dev_err_probe(dev, ret, "failed to enable regulator\n"); - ret = regmap_read(regmap, KX022A_REG_WHO, &chip_id); + ret = regmap_read(regmap, chip_info->who, &chip_id); if (ret) return dev_err_probe(dev, ret, "Failed to access sensor\n"); - if (chip_id != KX022A_ID) { - dev_err(dev, "unsupported device 0x%x\n", chip_id); - return -EINVAL; - } + if (chip_id != chip_info->id) + dev_warn(dev, "unknown device 0x%x\n", chip_id); irq = fwnode_irq_get_byname(fwnode, "INT1"); if (irq > 0) { - data->inc_reg = KX022A_REG_INC1; - data->ien_reg = KX022A_REG_INC4; + data->inc_reg = chip_info->inc1; + data->ien_reg = chip_info->inc4; } else { irq = fwnode_irq_get_byname(fwnode, "INT2"); if (irq < 0) return dev_err_probe(dev, irq, "No suitable IRQ\n"); - data->inc_reg = KX022A_REG_INC5; - data->ien_reg = KX022A_REG_INC6; + data->inc_reg = chip_info->inc5; + data->ien_reg = chip_info->inc6; } data->regmap = regmap; @@ -1050,9 +1284,9 @@ int kx022a_probe_internal(struct device *dev) data->odr_ns = KX022A_DEFAULT_PERIOD_NS; mutex_init(&data->mutex); - idev->channels = kx022a_channels; - idev->num_channels = ARRAY_SIZE(kx022a_channels); - idev->name = "kx022-accel"; + idev->channels = chip_info->channels; + idev->num_channels = chip_info->num_channels; + idev->name = chip_info->name; idev->info = &kx022a_info; idev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE; idev->available_scan_masks = kx022a_scan_masks; @@ -1110,7 +1344,6 @@ int kx022a_probe_internal(struct device *dev) if (ret) return dev_err_probe(data->dev, ret, "Could not request IRQ\n"); - ret = devm_iio_trigger_register(dev, indio_trig); if (ret) return dev_err_probe(data->dev, ret, diff --git a/drivers/iio/accel/kionix-kx022a.h b/drivers/iio/accel/kionix-kx022a.h index 12424649d438..7060438ad88c 100644 --- a/drivers/iio/accel/kionix-kx022a.h +++ b/drivers/iio/accel/kionix-kx022a.h @@ -13,6 +13,7 @@ #define KX022A_REG_WHO 0x0f #define KX022A_ID 0xc8 +#define KX132ACR_LBZ_ID 0xd8 #define KX022A_REG_CNTL2 0x19 #define KX022A_MASK_SRST BIT(7) @@ -74,9 +75,118 @@ #define KX022A_REG_SELF_TEST 0x60 #define KX022A_MAX_REGISTER 0x60 +#define KX132_REG_WHO 0x13 +#define KX132_ID 0x3d + +#define KX132_FIFO_LENGTH 86 + +#define KX132_REG_CNTL 0x1b +#define KX132_REG_CNTL2 0x1c +#define KX132_REG_CNTL5 0x1f +#define KX132_MASK_RES BIT(6) +#define KX132_GSEL_2 0x0 +#define KX132_GSEL_4 BIT(3) +#define KX132_GSEL_8 BIT(4) +#define KX132_GSEL_16 GENMASK(4, 3) + +#define KX132_REG_INS2 0x17 +#define KX132_MASK_INS2_WMI BIT(5) + +#define KX132_REG_XADP_L 0x02 +#define KX132_REG_XOUT_L 0x08 +#define KX132_REG_YOUT_L 0x0a +#define KX132_REG_ZOUT_L 0x0c +#define KX132_REG_COTR 0x12 +#define KX132_REG_TSCP 0x14 +#define KX132_REG_INT_REL 0x1a + +#define KX132_REG_ODCNTL 0x21 + +#define KX132_REG_BTS_WUF_TH 0x4a + +#define KX132_REG_BUF_CNTL1 0x5e +#define KX132_REG_BUF_CNTL2 0x5f +#define KX132_REG_BUF_STATUS_1 0x60 +#define KX132_REG_BUF_STATUS_2 0x61 +#define KX132_MASK_BUF_SMP_LVL GENMASK(9, 0) +#define KX132_REG_BUF_CLEAR 0x62 +#define KX132_REG_BUF_READ 0x63 +#define KX132_ODR_SHIFT 3 +#define KX132_FIFO_MAX_WMI_TH 86 + +#define KX132_REG_INC1 0x22 +#define KX132_REG_INC5 0x26 +#define KX132_REG_INC6 0x27 +#define KX132_IPOL_LOW 0 +#define KX132_IPOL_HIGH KX022A_MASK_IPOL +#define KX132_ITYP_PULSE KX022A_MASK_ITYP + +#define KX132_REG_INC4 0x25 + +#define KX132_REG_SELF_TEST 0x5d +#define KX132_MAX_REGISTER 0x76 + struct device; -int kx022a_probe_internal(struct device *dev); -extern const struct regmap_config kx022a_regmap; +struct kx022a_data; + +/** + * struct kx022a_chip_info - Kionix accelerometer chip specific information + * + * @name: name of the device + * @regmap_config: pointer to register map configuration + * @channels: pointer to iio_chan_spec array + * @num_channels: number of iio_chan_spec channels + * @fifo_length: number of 16-bit samples in a full buffer + * @buf_smp_lvl_mask: buffer sample level mask + * @who: WHO_AM_I register + * @id: WHO_AM_I register value + * @cntl: control register 1 + * @cntl2: control register 2 + * @odcntl: output data control register + * @buf_cntl1: buffer control register 1 + * @buf_cntl2: buffer control register 2 + * @buf_clear: buffer clear register + * @buf_status1: buffer status register 1 + * @buf_read: buffer read register + * @inc1: interrupt control register 1 + * @inc4: interrupt control register 4 + * @inc5: interrupt control register 5 + * @inc6: interrupt control register 6 + * @xout_l: x-axis output least significant byte + * @get_fifo_bytes_available: function pointer to get amount of acceleration + * data bytes currently stored in the sensor's FIFO + * buffer + */ +struct kx022a_chip_info { + const char *name; + const struct regmap_config *regmap_config; + const struct iio_chan_spec *channels; + unsigned int num_channels; + unsigned int fifo_length; + u16 buf_smp_lvl_mask; + u8 who; + u8 id; + u8 cntl; + u8 cntl2; + u8 odcntl; + u8 buf_cntl1; + u8 buf_cntl2; + u8 buf_clear; + u8 buf_status1; + u8 buf_read; + u8 inc1; + u8 inc4; + u8 inc5; + u8 inc6; + u8 xout_l; + int (*get_fifo_bytes_available)(struct kx022a_data *); +}; + +int kx022a_probe_internal(struct device *dev, const struct kx022a_chip_info *chip_info); + +extern const struct kx022a_chip_info kx022a_chip_info; +extern const struct kx022a_chip_info kx132_chip_info; +extern const struct kx022a_chip_info kx132acr_chip_info; #endif diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c index f42a88711486..d3fd0318e47b 100644 --- a/drivers/iio/accel/mma8452.c +++ b/drivers/iio/accel/mma8452.c @@ -1535,19 +1535,18 @@ static int mma8452_reset(struct i2c_client *client) } static const struct of_device_id mma8452_dt_ids[] = { + { .compatible = "fsl,fxls8471", .data = &mma_chip_info_table[fxls8471] }, { .compatible = "fsl,mma8451", .data = &mma_chip_info_table[mma8451] }, { .compatible = "fsl,mma8452", .data = &mma_chip_info_table[mma8452] }, { .compatible = "fsl,mma8453", .data = &mma_chip_info_table[mma8453] }, { .compatible = "fsl,mma8652", .data = &mma_chip_info_table[mma8652] }, { .compatible = "fsl,mma8653", .data = &mma_chip_info_table[mma8653] }, - { .compatible = "fsl,fxls8471", .data = &mma_chip_info_table[fxls8471] }, { } }; MODULE_DEVICE_TABLE(of, mma8452_dt_ids); static int mma8452_probe(struct i2c_client *client) { - const struct i2c_device_id *id = i2c_client_get_device_id(client); struct mma8452_data *data; struct iio_dev *indio_dev; int ret; @@ -1560,15 +1559,10 @@ static int mma8452_probe(struct i2c_client *client) data->client = client; mutex_init(&data->lock); - data->chip_info = device_get_match_data(&client->dev); - if (!data->chip_info) { - if (id) { - data->chip_info = &mma_chip_info_table[id->driver_data]; - } else { - dev_err(&client->dev, "unknown device model\n"); - return -ENODEV; - } - } + data->chip_info = i2c_get_match_data(client); + if (!data->chip_info) + return dev_err_probe(&client->dev, -ENODEV, + "unknown device model\n"); ret = iio_read_mount_matrix(&client->dev, &data->orientation); if (ret) @@ -1830,12 +1824,12 @@ static const struct dev_pm_ops mma8452_pm_ops = { }; static const struct i2c_device_id mma8452_id[] = { - { "mma8451", mma8451 }, - { "mma8452", mma8452 }, - { "mma8453", mma8453 }, - { "mma8652", mma8652 }, - { "mma8653", mma8653 }, - { "fxls8471", fxls8471 }, + { "fxls8471", (kernel_ulong_t)&mma_chip_info_table[fxls8471] }, + { "mma8451", (kernel_ulong_t)&mma_chip_info_table[mma8451] }, + { "mma8452", (kernel_ulong_t)&mma_chip_info_table[mma8452] }, + { "mma8453", (kernel_ulong_t)&mma_chip_info_table[mma8453] }, + { "mma8652", (kernel_ulong_t)&mma_chip_info_table[mma8652] }, + { "mma8653", (kernel_ulong_t)&mma_chip_info_table[mma8653] }, { } }; MODULE_DEVICE_TABLE(i2c, mma8452_id); diff --git a/drivers/iio/accel/msa311.c b/drivers/iio/accel/msa311.c index 6ddcc3c2f840..b8ddbfd98f11 100644 --- a/drivers/iio/accel/msa311.c +++ b/drivers/iio/accel/msa311.c @@ -33,7 +33,7 @@ #include <linux/pm.h> #include <linux/pm_runtime.h> #include <linux/regmap.h> -#include <linux/string_helpers.h> +#include <linux/string_choices.h> #include <linux/units.h> #include <linux/iio/buffer.h> diff --git a/drivers/iio/accel/mxc4005.c b/drivers/iio/accel/mxc4005.c index 75d142bc14b4..82e8d0b39049 100644 --- a/drivers/iio/accel/mxc4005.c +++ b/drivers/iio/accel/mxc4005.c @@ -476,6 +476,13 @@ static const struct acpi_device_id mxc4005_acpi_match[] = { }; MODULE_DEVICE_TABLE(acpi, mxc4005_acpi_match); +static const struct of_device_id mxc4005_of_match[] = { + { .compatible = "memsic,mxc4005", }, + { .compatible = "memsic,mxc6655", }, + { }, +}; +MODULE_DEVICE_TABLE(of, mxc4005_of_match); + static const struct i2c_device_id mxc4005_id[] = { {"mxc4005", 0}, {"mxc6655", 0}, @@ -487,6 +494,7 @@ static struct i2c_driver mxc4005_driver = { .driver = { .name = MXC4005_DRV_NAME, .acpi_match_table = ACPI_PTR(mxc4005_acpi_match), + .of_match_table = mxc4005_of_match, }, .probe = mxc4005_probe, .id_table = mxc4005_id, diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 517b3db114b8..35f9867da12c 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -607,6 +607,16 @@ config LPC32XX_ADC activate only one via device tree selection. Provides direct access via sysfs. +config LTC2309 + tristate "Linear Technology LTC2309 ADC driver" + depends on I2C + help + Say yes here to build support for Linear Technology LTC2309, a low + noise, low power, 8-channel, 12-bit SAR ADC + + This driver can also be built as a module. If so, the module will + be called ltc2309. + config LTC2471 tristate "Linear Technology LTC2471 and LTC2473 ADC driver" depends on I2C @@ -779,14 +789,29 @@ config MCP3422 This driver can also be built as a module. If so, the module will be called mcp3422. +config MCP3564 + tristate "Microchip Technology MCP3461/2/4/R, MCP3561/2/4/R driver" + depends on SPI + depends on IIO + help + Say yes here to build support for Microchip Technology's MCP3461, + MCP3462, MCP3464, MCP3461R, MCP3462R, MCP3464R, MCP3561, MCP3562, + MCP3564, MCP3561R, MCP3562R and MCP3564R analog to digital + converters. + + This driver can also be built as a module. If so, the module will be + called mcp3564. + config MCP3911 tristate "Microchip Technology MCP3911 driver" depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help - Say yes here to build support for Microchip Technology's MCP3911 - analog to digital converter. + Say yes here to build support for one of the following + Microchip Technology's analog to digital converters: + MCP3910, MCP3911, MCP3912, MCP3913, MCP3914, + MCP3918 and MCP3919. This driver can also be built as a module. If so, the module will be called mcp3911. diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 2facf979327d..bee11d442af4 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -56,6 +56,7 @@ obj-$(CONFIG_INTEL_MRFLD_ADC) += intel_mrfld_adc.o obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o obj-$(CONFIG_LPC18XX_ADC) += lpc18xx_adc.o obj-$(CONFIG_LPC32XX_ADC) += lpc32xx_adc.o +obj-$(CONFIG_LTC2309) += ltc2309.o obj-$(CONFIG_LTC2471) += ltc2471.o obj-$(CONFIG_LTC2485) += ltc2485.o obj-$(CONFIG_LTC2496) += ltc2496.o ltc2497-core.o @@ -71,6 +72,7 @@ obj-$(CONFIG_MAX77541_ADC) += max77541-adc.o obj-$(CONFIG_MAX9611) += max9611.o obj-$(CONFIG_MCP320X) += mcp320x.o obj-$(CONFIG_MCP3422) += mcp3422.o +obj-$(CONFIG_MCP3564) += mcp3564.o obj-$(CONFIG_MCP3911) += mcp3911.o obj-$(CONFIG_MEDIATEK_MT6360_ADC) += mt6360-adc.o obj-$(CONFIG_MEDIATEK_MT6370_ADC) += mt6370-adc.o diff --git a/drivers/iio/adc/ab8500-gpadc.c b/drivers/iio/adc/ab8500-gpadc.c index 3b1bdd0b531d..80645fee79a4 100644 --- a/drivers/iio/adc/ab8500-gpadc.c +++ b/drivers/iio/adc/ab8500-gpadc.c @@ -1179,7 +1179,7 @@ out_dis_pm: return ret; } -static int ab8500_gpadc_remove(struct platform_device *pdev) +static void ab8500_gpadc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct ab8500_gpadc *gpadc = iio_priv(indio_dev); @@ -1188,8 +1188,6 @@ static int ab8500_gpadc_remove(struct platform_device *pdev) pm_runtime_put_noidle(gpadc->dev); pm_runtime_disable(gpadc->dev); regulator_disable(gpadc->vddadc); - - return 0; } static DEFINE_RUNTIME_DEV_PM_OPS(ab8500_gpadc_pm_ops, @@ -1198,7 +1196,7 @@ static DEFINE_RUNTIME_DEV_PM_OPS(ab8500_gpadc_pm_ops, static struct platform_driver ab8500_gpadc_driver = { .probe = ab8500_gpadc_probe, - .remove = ab8500_gpadc_remove, + .remove_new = ab8500_gpadc_remove, .driver = { .name = "ab8500-gpadc", .pm = pm_ptr(&ab8500_gpadc_pm_ops), diff --git a/drivers/iio/adc/ad4130.c b/drivers/iio/adc/ad4130.c index 5a5dd5e87ffc..feb86fe6c422 100644 --- a/drivers/iio/adc/ad4130.c +++ b/drivers/iio/adc/ad4130.c @@ -1817,18 +1817,12 @@ static const struct clk_ops ad4130_int_clk_ops = { .unprepare = ad4130_int_clk_unprepare, }; -static void ad4130_clk_del_provider(void *of_node) -{ - of_clk_del_provider(of_node); -} - static int ad4130_setup_int_clk(struct ad4130_state *st) { struct device *dev = &st->spi->dev; struct device_node *of_node = dev_of_node(dev); struct clk_init_data init; const char *clk_name; - struct clk *clk; int ret; if (st->int_pin_sel == AD4130_INT_PIN_CLK || @@ -1845,15 +1839,12 @@ static int ad4130_setup_int_clk(struct ad4130_state *st) init.ops = &ad4130_int_clk_ops; st->int_clk_hw.init = &init; - clk = devm_clk_register(dev, &st->int_clk_hw); - if (IS_ERR(clk)) - return PTR_ERR(clk); - - ret = of_clk_add_provider(of_node, of_clk_src_simple_get, clk); + ret = devm_clk_hw_register(dev, &st->int_clk_hw); if (ret) return ret; - return devm_add_action_or_reset(dev, ad4130_clk_del_provider, of_node); + return devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, + &st->int_clk_hw); } static int ad4130_setup(struct iio_dev *indio_dev) diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c index b64fd365f83f..adc3cbe92d6e 100644 --- a/drivers/iio/adc/ad7192.c +++ b/drivers/iio/adc/ad7192.c @@ -6,6 +6,7 @@ */ #include <linux/interrupt.h> +#include <linux/bitfield.h> #include <linux/clk.h> #include <linux/device.h> #include <linux/kernel.h> @@ -43,7 +44,7 @@ #define AD7192_COMM_WEN BIT(7) /* Write Enable */ #define AD7192_COMM_WRITE 0 /* Write Operation */ #define AD7192_COMM_READ BIT(6) /* Read Operation */ -#define AD7192_COMM_ADDR(x) (((x) & 0x7) << 3) /* Register Address */ +#define AD7192_COMM_ADDR_MASK GENMASK(5, 3) /* Register Address Mask */ #define AD7192_COMM_CREAD BIT(2) /* Continuous Read of Data Register */ /* Status Register Bit Designations (AD7192_REG_STAT) */ @@ -56,17 +57,18 @@ #define AD7192_STAT_CH1 BIT(0) /* Channel 1 */ /* Mode Register Bit Designations (AD7192_REG_MODE) */ -#define AD7192_MODE_SEL(x) (((x) & 0x7) << 21) /* Operation Mode Select */ -#define AD7192_MODE_SEL_MASK (0x7 << 21) /* Operation Mode Select Mask */ -#define AD7192_MODE_STA(x) (((x) & 0x1) << 20) /* Status Register transmission */ +#define AD7192_MODE_SEL_MASK GENMASK(23, 21) /* Operation Mode Select Mask */ #define AD7192_MODE_STA_MASK BIT(20) /* Status Register transmission Mask */ -#define AD7192_MODE_CLKSRC(x) (((x) & 0x3) << 18) /* Clock Source Select */ +#define AD7192_MODE_CLKSRC_MASK GENMASK(19, 18) /* Clock Source Select Mask */ +#define AD7192_MODE_AVG_MASK GENMASK(17, 16) + /* Fast Settling Filter Average Select Mask (AD7193 only) */ #define AD7192_MODE_SINC3 BIT(15) /* SINC3 Filter Select */ #define AD7192_MODE_ENPAR BIT(13) /* Parity Enable */ #define AD7192_MODE_CLKDIV BIT(12) /* Clock divide by 2 (AD7190/2 only)*/ #define AD7192_MODE_SCYCLE BIT(11) /* Single cycle conversion */ #define AD7192_MODE_REJ60 BIT(10) /* 50/60Hz notch filter */ -#define AD7192_MODE_RATE(x) ((x) & 0x3FF) /* Filter Update Rate Select */ + /* Filter Update Rate Select Mask */ +#define AD7192_MODE_RATE_MASK GENMASK(9, 0) /* Mode Register: AD7192_MODE_SEL options */ #define AD7192_MODE_CONT 0 /* Continuous Conversion Mode */ @@ -92,13 +94,12 @@ #define AD7192_CONF_CHOP BIT(23) /* CHOP enable */ #define AD7192_CONF_ACX BIT(22) /* AC excitation enable(AD7195 only) */ #define AD7192_CONF_REFSEL BIT(20) /* REFIN1/REFIN2 Reference Select */ -#define AD7192_CONF_CHAN(x) ((x) << 8) /* Channel select */ -#define AD7192_CONF_CHAN_MASK (0x7FF << 8) /* Channel select mask */ +#define AD7192_CONF_CHAN_MASK GENMASK(18, 8) /* Channel select mask */ #define AD7192_CONF_BURN BIT(7) /* Burnout current enable */ #define AD7192_CONF_REFDET BIT(6) /* Reference detect enable */ #define AD7192_CONF_BUF BIT(4) /* Buffered Mode Enable */ #define AD7192_CONF_UNIPOLAR BIT(3) /* Unipolar/Bipolar Enable */ -#define AD7192_CONF_GAIN(x) ((x) & 0x7) /* Gain Select */ +#define AD7192_CONF_GAIN_MASK GENMASK(2, 0) /* Gain Select */ #define AD7192_CH_AIN1P_AIN2M BIT(0) /* AIN1(+) - AIN2(-) */ #define AD7192_CH_AIN3P_AIN4M BIT(1) /* AIN3(+) - AIN4(-) */ @@ -130,7 +131,7 @@ #define CHIPID_AD7192 0x0 #define CHIPID_AD7193 0x2 #define CHIPID_AD7195 0x6 -#define AD7192_ID_MASK 0x0F +#define AD7192_ID_MASK GENMASK(3, 0) /* GPOCON Register Bit Designations (AD7192_REG_GPOCON) */ #define AD7192_GPOCON_BPDSW BIT(6) /* Bridge power-down switch enable */ @@ -172,6 +173,9 @@ enum { struct ad7192_chip_info { unsigned int chip_id; const char *name; + const struct iio_chan_spec *channels; + u8 num_channels; + const struct iio_info *info; }; struct ad7192_state { @@ -181,10 +185,10 @@ struct ad7192_state { struct clk *mclk; u16 int_vref_mv; u32 fclk; - u32 f_order; u32 mode; u32 conf; u32 scale_avail[8][2]; + u32 oversampling_ratio_avail[4]; u8 gpocon; u8 clock_sel; struct mutex lock; /* protect sensor state */ @@ -273,7 +277,7 @@ static int ad7192_set_channel(struct ad_sigma_delta *sd, unsigned int channel) struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd); st->conf &= ~AD7192_CONF_CHAN_MASK; - st->conf |= AD7192_CONF_CHAN(channel); + st->conf |= FIELD_PREP(AD7192_CONF_CHAN_MASK, channel); return ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf); } @@ -284,7 +288,7 @@ static int ad7192_set_mode(struct ad_sigma_delta *sd, struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd); st->mode &= ~AD7192_MODE_SEL_MASK; - st->mode |= AD7192_MODE_SEL(mode); + st->mode |= FIELD_PREP(AD7192_MODE_SEL_MASK, mode); return ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); } @@ -296,7 +300,7 @@ static int ad7192_append_status(struct ad_sigma_delta *sd, bool append) int ret; mode &= ~AD7192_MODE_STA_MASK; - mode |= AD7192_MODE_STA(append); + mode |= FIELD_PREP(AD7192_MODE_STA_MASK, append); ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, mode); if (ret < 0) @@ -400,17 +404,17 @@ static int ad7192_setup(struct iio_dev *indio_dev, struct device_node *np) if (ret) return ret; - id &= AD7192_ID_MASK; + id = FIELD_GET(AD7192_ID_MASK, id); if (id != st->chip_info->chip_id) dev_warn(&st->sd.spi->dev, "device ID query failed (0x%X != 0x%X)\n", id, st->chip_info->chip_id); - st->mode = AD7192_MODE_SEL(AD7192_MODE_IDLE) | - AD7192_MODE_CLKSRC(st->clock_sel) | - AD7192_MODE_RATE(480); + st->mode = FIELD_PREP(AD7192_MODE_SEL_MASK, AD7192_MODE_IDLE) | + FIELD_PREP(AD7192_MODE_CLKSRC_MASK, st->clock_sel) | + FIELD_PREP(AD7192_MODE_RATE_MASK, 480); - st->conf = AD7192_CONF_GAIN(0); + st->conf = FIELD_PREP(AD7192_CONF_GAIN_MASK, 0); rej60_en = of_property_read_bool(np, "adi,rejection-60-Hz-enable"); if (rej60_en) @@ -421,7 +425,6 @@ static int ad7192_setup(struct iio_dev *indio_dev, struct device_node *np) st->conf |= AD7192_CONF_REFSEL; st->conf &= ~AD7192_CONF_CHOP; - st->f_order = AD7192_NO_SYNC_FILTER; buf_en = of_property_read_bool(np, "adi,buffer-enable"); if (buf_en) @@ -456,13 +459,18 @@ static int ad7192_setup(struct iio_dev *indio_dev, struct device_node *np) for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) { scale_uv = ((u64)st->int_vref_mv * 100000000) >> (indio_dev->channels[0].scan_type.realbits - - ((st->conf & AD7192_CONF_UNIPOLAR) ? 0 : 1)); + !FIELD_GET(AD7192_CONF_UNIPOLAR, st->conf)); scale_uv >>= i; st->scale_avail[i][1] = do_div(scale_uv, 100000000) * 10; st->scale_avail[i][0] = scale_uv; } + st->oversampling_ratio_avail[0] = 1; + st->oversampling_ratio_avail[1] = 2; + st->oversampling_ratio_avail[2] = 8; + st->oversampling_ratio_avail[3] = 16; + return 0; } @@ -473,7 +481,7 @@ static ssize_t ad7192_show_ac_excitation(struct device *dev, struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct ad7192_state *st = iio_priv(indio_dev); - return sysfs_emit(buf, "%d\n", !!(st->conf & AD7192_CONF_ACX)); + return sysfs_emit(buf, "%ld\n", FIELD_GET(AD7192_CONF_ACX, st->conf)); } static ssize_t ad7192_show_bridge_switch(struct device *dev, @@ -483,7 +491,8 @@ static ssize_t ad7192_show_bridge_switch(struct device *dev, struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct ad7192_state *st = iio_priv(indio_dev); - return sysfs_emit(buf, "%d\n", !!(st->gpocon & AD7192_GPOCON_BPDSW)); + return sysfs_emit(buf, "%ld\n", + FIELD_GET(AD7192_GPOCON_BPDSW, st->gpocon)); } static ssize_t ad7192_set(struct device *dev, @@ -531,22 +540,66 @@ static ssize_t ad7192_set(struct device *dev, return ret ? ret : len; } +static int ad7192_compute_f_order(struct ad7192_state *st, bool sinc3_en, bool chop_en) +{ + u8 avg_factor_selected, oversampling_ratio; + + avg_factor_selected = FIELD_GET(AD7192_MODE_AVG_MASK, st->mode); + + if (!avg_factor_selected && !chop_en) + return 1; + + oversampling_ratio = st->oversampling_ratio_avail[avg_factor_selected]; + + if (sinc3_en) + return AD7192_SYNC3_FILTER + oversampling_ratio - 1; + + return AD7192_SYNC4_FILTER + oversampling_ratio - 1; +} + +static int ad7192_get_f_order(struct ad7192_state *st) +{ + bool sinc3_en, chop_en; + + sinc3_en = FIELD_GET(AD7192_MODE_SINC3, st->mode); + chop_en = FIELD_GET(AD7192_CONF_CHOP, st->conf); + + return ad7192_compute_f_order(st, sinc3_en, chop_en); +} + +static int ad7192_compute_f_adc(struct ad7192_state *st, bool sinc3_en, + bool chop_en) +{ + unsigned int f_order = ad7192_compute_f_order(st, sinc3_en, chop_en); + + return DIV_ROUND_CLOSEST(st->fclk, + f_order * FIELD_GET(AD7192_MODE_RATE_MASK, st->mode)); +} + +static int ad7192_get_f_adc(struct ad7192_state *st) +{ + unsigned int f_order = ad7192_get_f_order(st); + + return DIV_ROUND_CLOSEST(st->fclk, + f_order * FIELD_GET(AD7192_MODE_RATE_MASK, st->mode)); +} + static void ad7192_get_available_filter_freq(struct ad7192_state *st, int *freq) { unsigned int fadc; /* Formulas for filter at page 25 of the datasheet */ - fadc = DIV_ROUND_CLOSEST(st->fclk, - AD7192_SYNC4_FILTER * AD7192_MODE_RATE(st->mode)); + fadc = ad7192_compute_f_adc(st, false, true); freq[0] = DIV_ROUND_CLOSEST(fadc * 240, 1024); - fadc = DIV_ROUND_CLOSEST(st->fclk, - AD7192_SYNC3_FILTER * AD7192_MODE_RATE(st->mode)); + fadc = ad7192_compute_f_adc(st, true, true); freq[1] = DIV_ROUND_CLOSEST(fadc * 240, 1024); - fadc = DIV_ROUND_CLOSEST(st->fclk, AD7192_MODE_RATE(st->mode)); + fadc = ad7192_compute_f_adc(st, false, false); freq[2] = DIV_ROUND_CLOSEST(fadc * 230, 1024); + + fadc = ad7192_compute_f_adc(st, true, false); freq[3] = DIV_ROUND_CLOSEST(fadc * 272, 1024); } @@ -629,25 +682,21 @@ static int ad7192_set_3db_filter_freq(struct ad7192_state *st, switch (idx) { case 0: - st->f_order = AD7192_SYNC4_FILTER; st->mode &= ~AD7192_MODE_SINC3; st->conf |= AD7192_CONF_CHOP; break; case 1: - st->f_order = AD7192_SYNC3_FILTER; st->mode |= AD7192_MODE_SINC3; st->conf |= AD7192_CONF_CHOP; break; case 2: - st->f_order = AD7192_NO_SYNC_FILTER; st->mode &= ~AD7192_MODE_SINC3; st->conf &= ~AD7192_CONF_CHOP; break; case 3: - st->f_order = AD7192_NO_SYNC_FILTER; st->mode |= AD7192_MODE_SINC3; st->conf &= ~AD7192_CONF_CHOP; @@ -665,12 +714,11 @@ static int ad7192_get_3db_filter_freq(struct ad7192_state *st) { unsigned int fadc; - fadc = DIV_ROUND_CLOSEST(st->fclk, - st->f_order * AD7192_MODE_RATE(st->mode)); + fadc = ad7192_get_f_adc(st); - if (st->conf & AD7192_CONF_CHOP) + if (FIELD_GET(AD7192_CONF_CHOP, st->conf)) return DIV_ROUND_CLOSEST(fadc * 240, 1024); - if (st->mode & AD7192_MODE_SINC3) + if (FIELD_GET(AD7192_MODE_SINC3, st->mode)) return DIV_ROUND_CLOSEST(fadc * 272, 1024); else return DIV_ROUND_CLOSEST(fadc * 230, 1024); @@ -683,7 +731,8 @@ static int ad7192_read_raw(struct iio_dev *indio_dev, long m) { struct ad7192_state *st = iio_priv(indio_dev); - bool unipolar = !!(st->conf & AD7192_CONF_UNIPOLAR); + bool unipolar = FIELD_GET(AD7192_CONF_UNIPOLAR, st->conf); + u8 gain = FIELD_GET(AD7192_CONF_GAIN_MASK, st->conf); switch (m) { case IIO_CHAN_INFO_RAW: @@ -692,8 +741,8 @@ static int ad7192_read_raw(struct iio_dev *indio_dev, switch (chan->type) { case IIO_VOLTAGE: mutex_lock(&st->lock); - *val = st->scale_avail[AD7192_CONF_GAIN(st->conf)][0]; - *val2 = st->scale_avail[AD7192_CONF_GAIN(st->conf)][1]; + *val = st->scale_avail[gain][0]; + *val2 = st->scale_avail[gain][1]; mutex_unlock(&st->lock); return IIO_VAL_INT_PLUS_NANO; case IIO_TEMP: @@ -713,13 +762,15 @@ static int ad7192_read_raw(struct iio_dev *indio_dev, *val -= 273 * ad7192_get_temp_scale(unipolar); return IIO_VAL_INT; case IIO_CHAN_INFO_SAMP_FREQ: - *val = st->fclk / - (st->f_order * 1024 * AD7192_MODE_RATE(st->mode)); + *val = DIV_ROUND_CLOSEST(ad7192_get_f_adc(st), 1024); return IIO_VAL_INT; case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: *val = ad7192_get_3db_filter_freq(st); *val2 = 1000; return IIO_VAL_FRACTIONAL; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + *val = st->oversampling_ratio_avail[FIELD_GET(AD7192_MODE_AVG_MASK, st->mode)]; + return IIO_VAL_INT; } return -EINVAL; @@ -747,8 +798,8 @@ static int ad7192_write_raw(struct iio_dev *indio_dev, if (val2 == st->scale_avail[i][1]) { ret = 0; tmp = st->conf; - st->conf &= ~AD7192_CONF_GAIN(-1); - st->conf |= AD7192_CONF_GAIN(i); + st->conf &= ~AD7192_CONF_GAIN_MASK; + st->conf |= FIELD_PREP(AD7192_CONF_GAIN_MASK, i); if (tmp == st->conf) break; ad_sd_write_reg(&st->sd, AD7192_REG_CONF, @@ -764,19 +815,36 @@ static int ad7192_write_raw(struct iio_dev *indio_dev, break; } - div = st->fclk / (val * st->f_order * 1024); + div = st->fclk / (val * ad7192_get_f_order(st) * 1024); if (div < 1 || div > 1023) { ret = -EINVAL; break; } - st->mode &= ~AD7192_MODE_RATE(-1); - st->mode |= AD7192_MODE_RATE(div); + st->mode &= ~AD7192_MODE_RATE_MASK; + st->mode |= FIELD_PREP(AD7192_MODE_RATE_MASK, div); ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); break; case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: ret = ad7192_set_3db_filter_freq(st, val, val2 / 1000); break; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + ret = -EINVAL; + mutex_lock(&st->lock); + for (i = 0; i < ARRAY_SIZE(st->oversampling_ratio_avail); i++) + if (val == st->oversampling_ratio_avail[i]) { + ret = 0; + tmp = st->mode; + st->mode &= ~AD7192_MODE_AVG_MASK; + st->mode |= FIELD_PREP(AD7192_MODE_AVG_MASK, i); + if (tmp == st->mode) + break; + ad_sd_write_reg(&st->sd, AD7192_REG_MODE, + 3, st->mode); + break; + } + mutex_unlock(&st->lock); + break; default: ret = -EINVAL; } @@ -797,6 +865,8 @@ static int ad7192_write_raw_get_fmt(struct iio_dev *indio_dev, return IIO_VAL_INT; case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: return IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + return IIO_VAL_INT; default: return -EINVAL; } @@ -817,6 +887,12 @@ static int ad7192_read_avail(struct iio_dev *indio_dev, *length = ARRAY_SIZE(st->scale_avail) * 2; return IIO_AVAIL_LIST; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + *vals = (int *)st->oversampling_ratio_avail; + *type = IIO_VAL_INT; + *length = ARRAY_SIZE(st->oversampling_ratio_avail); + + return IIO_AVAIL_LIST; } return -EINVAL; @@ -831,7 +907,7 @@ static int ad7192_update_scan_mode(struct iio_dev *indio_dev, const unsigned lon conf &= ~AD7192_CONF_CHAN_MASK; for_each_set_bit(i, scan_mask, 8) - conf |= AD7192_CONF_CHAN(i); + conf |= FIELD_PREP(AD7192_CONF_CHAN_MASK, i); ret = ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, conf); if (ret < 0) @@ -862,8 +938,8 @@ static const struct iio_info ad7195_info = { .update_scan_mode = ad7192_update_scan_mode, }; -#define __AD719x_CHANNEL(_si, _channel1, _channel2, _address, _extend_name, \ - _type, _mask_type_av, _ext_info) \ +#define __AD719x_CHANNEL(_si, _channel1, _channel2, _address, _type, \ + _mask_all, _mask_type_av, _mask_all_av, _ext_info) \ { \ .type = (_type), \ .differential = ((_channel2) == -1 ? 0 : 1), \ @@ -871,13 +947,14 @@ static const struct iio_info ad7195_info = { .channel = (_channel1), \ .channel2 = (_channel2), \ .address = (_address), \ - .extend_name = (_extend_name), \ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ BIT(IIO_CHAN_INFO_OFFSET), \ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ - BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \ + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) | \ + (_mask_all), \ .info_mask_shared_by_type_available = (_mask_type_av), \ + .info_mask_shared_by_all_available = (_mask_all_av), \ .ext_info = (_ext_info), \ .scan_index = (_si), \ .scan_type = { \ @@ -889,16 +966,26 @@ static const struct iio_info ad7195_info = { } #define AD719x_DIFF_CHANNEL(_si, _channel1, _channel2, _address) \ - __AD719x_CHANNEL(_si, _channel1, _channel2, _address, NULL, \ - IIO_VOLTAGE, BIT(IIO_CHAN_INFO_SCALE), \ - ad7192_calibsys_ext_info) + __AD719x_CHANNEL(_si, _channel1, _channel2, _address, IIO_VOLTAGE, 0, \ + BIT(IIO_CHAN_INFO_SCALE), 0, ad7192_calibsys_ext_info) #define AD719x_CHANNEL(_si, _channel1, _address) \ - __AD719x_CHANNEL(_si, _channel1, -1, _address, NULL, IIO_VOLTAGE, \ - BIT(IIO_CHAN_INFO_SCALE), ad7192_calibsys_ext_info) + __AD719x_CHANNEL(_si, _channel1, -1, _address, IIO_VOLTAGE, 0, \ + BIT(IIO_CHAN_INFO_SCALE), 0, ad7192_calibsys_ext_info) #define AD719x_TEMP_CHANNEL(_si, _address) \ - __AD719x_CHANNEL(_si, 0, -1, _address, NULL, IIO_TEMP, 0, NULL) + __AD719x_CHANNEL(_si, 0, -1, _address, IIO_TEMP, 0, 0, 0, NULL) + +#define AD7193_DIFF_CHANNEL(_si, _channel1, _channel2, _address) \ + __AD719x_CHANNEL(_si, _channel1, _channel2, _address, \ + IIO_VOLTAGE, \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ + BIT(IIO_CHAN_INFO_SCALE), \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ + ad7192_calibsys_ext_info) + +#define AD7193_CHANNEL(_si, _channel1, _address) \ + AD7193_DIFF_CHANNEL(_si, _channel1, -1, _address) static const struct iio_chan_spec ad7192_channels[] = { AD719x_DIFF_CHANNEL(0, 1, 2, AD7192_CH_AIN1P_AIN2M), @@ -913,20 +1000,20 @@ static const struct iio_chan_spec ad7192_channels[] = { }; static const struct iio_chan_spec ad7193_channels[] = { - AD719x_DIFF_CHANNEL(0, 1, 2, AD7193_CH_AIN1P_AIN2M), - AD719x_DIFF_CHANNEL(1, 3, 4, AD7193_CH_AIN3P_AIN4M), - AD719x_DIFF_CHANNEL(2, 5, 6, AD7193_CH_AIN5P_AIN6M), - AD719x_DIFF_CHANNEL(3, 7, 8, AD7193_CH_AIN7P_AIN8M), + AD7193_DIFF_CHANNEL(0, 1, 2, AD7193_CH_AIN1P_AIN2M), + AD7193_DIFF_CHANNEL(1, 3, 4, AD7193_CH_AIN3P_AIN4M), + AD7193_DIFF_CHANNEL(2, 5, 6, AD7193_CH_AIN5P_AIN6M), + AD7193_DIFF_CHANNEL(3, 7, 8, AD7193_CH_AIN7P_AIN8M), AD719x_TEMP_CHANNEL(4, AD7193_CH_TEMP), - AD719x_DIFF_CHANNEL(5, 2, 2, AD7193_CH_AIN2P_AIN2M), - AD719x_CHANNEL(6, 1, AD7193_CH_AIN1), - AD719x_CHANNEL(7, 2, AD7193_CH_AIN2), - AD719x_CHANNEL(8, 3, AD7193_CH_AIN3), - AD719x_CHANNEL(9, 4, AD7193_CH_AIN4), - AD719x_CHANNEL(10, 5, AD7193_CH_AIN5), - AD719x_CHANNEL(11, 6, AD7193_CH_AIN6), - AD719x_CHANNEL(12, 7, AD7193_CH_AIN7), - AD719x_CHANNEL(13, 8, AD7193_CH_AIN8), + AD7193_DIFF_CHANNEL(5, 2, 2, AD7193_CH_AIN2P_AIN2M), + AD7193_CHANNEL(6, 1, AD7193_CH_AIN1), + AD7193_CHANNEL(7, 2, AD7193_CH_AIN2), + AD7193_CHANNEL(8, 3, AD7193_CH_AIN3), + AD7193_CHANNEL(9, 4, AD7193_CH_AIN4), + AD7193_CHANNEL(10, 5, AD7193_CH_AIN5), + AD7193_CHANNEL(11, 6, AD7193_CH_AIN6), + AD7193_CHANNEL(12, 7, AD7193_CH_AIN7), + AD7193_CHANNEL(13, 8, AD7193_CH_AIN8), IIO_CHAN_SOFT_TIMESTAMP(14), }; @@ -934,39 +1021,33 @@ static const struct ad7192_chip_info ad7192_chip_info_tbl[] = { [ID_AD7190] = { .chip_id = CHIPID_AD7190, .name = "ad7190", + .channels = ad7192_channels, + .num_channels = ARRAY_SIZE(ad7192_channels), + .info = &ad7192_info, }, [ID_AD7192] = { .chip_id = CHIPID_AD7192, .name = "ad7192", + .channels = ad7192_channels, + .num_channels = ARRAY_SIZE(ad7192_channels), + .info = &ad7192_info, }, [ID_AD7193] = { .chip_id = CHIPID_AD7193, .name = "ad7193", + .channels = ad7193_channels, + .num_channels = ARRAY_SIZE(ad7193_channels), + .info = &ad7192_info, }, [ID_AD7195] = { .chip_id = CHIPID_AD7195, .name = "ad7195", + .channels = ad7192_channels, + .num_channels = ARRAY_SIZE(ad7192_channels), + .info = &ad7195_info, }, }; -static int ad7192_channels_config(struct iio_dev *indio_dev) -{ - struct ad7192_state *st = iio_priv(indio_dev); - - switch (st->chip_info->chip_id) { - case CHIPID_AD7193: - indio_dev->channels = ad7193_channels; - indio_dev->num_channels = ARRAY_SIZE(ad7193_channels); - break; - default: - indio_dev->channels = ad7192_channels; - indio_dev->num_channels = ARRAY_SIZE(ad7192_channels); - break; - } - - return 0; -} - static void ad7192_reg_disable(void *reg) { regulator_disable(reg); @@ -1041,15 +1122,9 @@ static int ad7192_probe(struct spi_device *spi) st->chip_info = (void *)spi_get_device_id(spi)->driver_data; indio_dev->name = st->chip_info->name; indio_dev->modes = INDIO_DIRECT_MODE; - - ret = ad7192_channels_config(indio_dev); - if (ret < 0) - return ret; - - if (st->chip_info->chip_id == CHIPID_AD7195) - indio_dev->info = &ad7195_info; - else - indio_dev->info = &ad7192_info; + indio_dev->channels = st->chip_info->channels; + indio_dev->num_channels = st->chip_info->num_channels; + indio_dev->info = st->chip_info->info; ret = ad_sd_init(&st->sd, indio_dev, spi, &ad7192_sigma_delta_info); if (ret) diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c index df67b63ccf69..d7fd21e7c6e2 100644 --- a/drivers/iio/adc/at91-sama5d2_adc.c +++ b/drivers/iio/adc/at91-sama5d2_adc.c @@ -2486,7 +2486,7 @@ reg_disable: return ret; } -static int at91_adc_remove(struct platform_device *pdev) +static void at91_adc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct at91_adc_state *st = iio_priv(indio_dev); @@ -2501,8 +2501,6 @@ static int at91_adc_remove(struct platform_device *pdev) regulator_disable(st->vref); regulator_disable(st->reg); - - return 0; } static int at91_adc_suspend(struct device *dev) @@ -2627,7 +2625,7 @@ MODULE_DEVICE_TABLE(of, at91_adc_dt_match); static struct platform_driver at91_adc_driver = { .probe = at91_adc_probe, - .remove = at91_adc_remove, + .remove_new = at91_adc_remove, .driver = { .name = "at91-sama5d2_adc", .of_match_table = at91_adc_dt_match, diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c index de6650f9c4b1..eb501e3c86a5 100644 --- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c @@ -1013,28 +1013,25 @@ static int at91_adc_probe(struct platform_device *pdev) st->use_external = of_property_read_bool(node, "atmel,adc-use-external-triggers"); - if (of_property_read_u32(node, "atmel,adc-channels-used", &prop)) { - dev_err(&idev->dev, "Missing adc-channels-used property in the DT.\n"); - return -EINVAL; - } + if (of_property_read_u32(node, "atmel,adc-channels-used", &prop)) + return dev_err_probe(&idev->dev, -EINVAL, + "Missing adc-channels-used property in the DT.\n"); st->channels_mask = prop; st->sleep_mode = of_property_read_bool(node, "atmel,adc-sleep-mode"); - if (of_property_read_u32(node, "atmel,adc-startup-time", &prop)) { - dev_err(&idev->dev, "Missing adc-startup-time property in the DT.\n"); - return -EINVAL; - } + if (of_property_read_u32(node, "atmel,adc-startup-time", &prop)) + return dev_err_probe(&idev->dev, -EINVAL, + "Missing adc-startup-time property in the DT.\n"); st->startup_time = prop; prop = 0; of_property_read_u32(node, "atmel,adc-sample-hold-time", &prop); st->sample_hold_time = prop; - if (of_property_read_u32(node, "atmel,adc-vref", &prop)) { - dev_err(&idev->dev, "Missing adc-vref property in the DT.\n"); - return -EINVAL; - } + if (of_property_read_u32(node, "atmel,adc-vref", &prop)) + return dev_err_probe(&idev->dev, -EINVAL, + "Missing adc-vref property in the DT.\n"); st->vref_mv = prop; st->res = st->caps->high_res_bits; @@ -1069,7 +1066,6 @@ static int at91_adc_probe(struct platform_device *pdev) if (IS_ERR(st->reg_base)) return PTR_ERR(st->reg_base); - /* * Disable all IRQs before setting up the handler */ @@ -1077,43 +1073,26 @@ static int at91_adc_probe(struct platform_device *pdev) at91_adc_writel(st, AT91_ADC_IDR, 0xFFFFFFFF); if (st->caps->has_tsmr) - ret = request_irq(st->irq, at91_adc_9x5_interrupt, 0, - pdev->dev.driver->name, idev); + ret = devm_request_irq(&pdev->dev, st->irq, + at91_adc_9x5_interrupt, 0, + pdev->dev.driver->name, idev); else - ret = request_irq(st->irq, at91_adc_rl_interrupt, 0, - pdev->dev.driver->name, idev); - if (ret) { - dev_err(&pdev->dev, "Failed to allocate IRQ.\n"); - return ret; - } - - st->clk = devm_clk_get(&pdev->dev, "adc_clk"); - if (IS_ERR(st->clk)) { - dev_err(&pdev->dev, "Failed to get the clock.\n"); - ret = PTR_ERR(st->clk); - goto error_free_irq; - } - - ret = clk_prepare_enable(st->clk); - if (ret) { - dev_err(&pdev->dev, - "Could not prepare or enable the clock.\n"); - goto error_free_irq; - } + ret = devm_request_irq(&pdev->dev, st->irq, + at91_adc_rl_interrupt, 0, + pdev->dev.driver->name, idev); + if (ret) + return dev_err_probe(&pdev->dev, ret, + "Failed to allocate IRQ.\n"); - st->adc_clk = devm_clk_get(&pdev->dev, "adc_op_clk"); - if (IS_ERR(st->adc_clk)) { - dev_err(&pdev->dev, "Failed to get the ADC clock.\n"); - ret = PTR_ERR(st->adc_clk); - goto error_disable_clk; - } + st->clk = devm_clk_get_enabled(&pdev->dev, "adc_clk"); + if (IS_ERR(st->clk)) + return dev_err_probe(&pdev->dev, PTR_ERR(st->clk), + "Could not prepare or enable the clock.\n"); - ret = clk_prepare_enable(st->adc_clk); - if (ret) { - dev_err(&pdev->dev, - "Could not prepare or enable the ADC clock.\n"); - goto error_disable_clk; - } + st->adc_clk = devm_clk_get_enabled(&pdev->dev, "adc_op_clk"); + if (IS_ERR(st->adc_clk)) + return dev_err_probe(&pdev->dev, PTR_ERR(st->adc_clk), + "Could not prepare or enable the ADC clock.\n"); /* * Prescaler rate computation using the formula from the Atmel's @@ -1129,11 +1108,9 @@ static int at91_adc_probe(struct platform_device *pdev) prsc = (mstrclk / (2 * adc_clk)) - 1; - if (!st->startup_time) { - dev_err(&pdev->dev, "No startup time available.\n"); - ret = -EINVAL; - goto error_disable_adc_clk; - } + if (!st->startup_time) + return dev_err_probe(&pdev->dev, -EINVAL, + "No startup time available.\n"); ticks = (*st->caps->calc_startup_ticks)(st->startup_time, adc_clk_khz); /* @@ -1158,10 +1135,9 @@ static int at91_adc_probe(struct platform_device *pdev) /* Setup the ADC channels available on the board */ ret = at91_adc_channel_init(idev); - if (ret < 0) { - dev_err(&pdev->dev, "Couldn't initialize the channels.\n"); - goto error_disable_adc_clk; - } + if (ret < 0) + return dev_err_probe(&pdev->dev, ret, + "Couldn't initialize the channels.\n"); init_waitqueue_head(&st->wq_data_avail); mutex_init(&st->lock); @@ -1173,21 +1149,20 @@ static int at91_adc_probe(struct platform_device *pdev) */ if (!st->touchscreen_type) { ret = at91_adc_buffer_init(idev); - if (ret < 0) { - dev_err(&pdev->dev, "Couldn't initialize the buffer.\n"); - goto error_disable_adc_clk; - } + if (ret < 0) + return dev_err_probe(&pdev->dev, ret, + "Couldn't initialize the buffer.\n"); ret = at91_adc_trigger_init(idev); if (ret < 0) { dev_err(&pdev->dev, "Couldn't setup the triggers.\n"); at91_adc_buffer_remove(idev); - goto error_disable_adc_clk; + return ret; } } else { ret = at91_ts_register(idev, pdev); if (ret) - goto error_disable_adc_clk; + return ret; at91_ts_hw_init(idev, adc_clk_khz); } @@ -1207,16 +1182,10 @@ error_iio_device_register: } else { at91_ts_unregister(st); } -error_disable_adc_clk: - clk_disable_unprepare(st->adc_clk); -error_disable_clk: - clk_disable_unprepare(st->clk); -error_free_irq: - free_irq(st->irq, idev); return ret; } -static int at91_adc_remove(struct platform_device *pdev) +static void at91_adc_remove(struct platform_device *pdev) { struct iio_dev *idev = platform_get_drvdata(pdev); struct at91_adc_state *st = iio_priv(idev); @@ -1228,11 +1197,6 @@ static int at91_adc_remove(struct platform_device *pdev) } else { at91_ts_unregister(st); } - clk_disable_unprepare(st->adc_clk); - clk_disable_unprepare(st->clk); - free_irq(st->irq, idev); - - return 0; } static int at91_adc_suspend(struct device *dev) @@ -1382,7 +1346,7 @@ MODULE_DEVICE_TABLE(of, at91_adc_dt_ids); static struct platform_driver at91_adc_driver = { .probe = at91_adc_probe, - .remove = at91_adc_remove, + .remove_new = at91_adc_remove, .driver = { .name = DRIVER_NAME, .of_match_table = at91_adc_dt_ids, diff --git a/drivers/iio/adc/axp20x_adc.c b/drivers/iio/adc/axp20x_adc.c index 75bda94dbce1..d6c51b0f48e3 100644 --- a/drivers/iio/adc/axp20x_adc.c +++ b/drivers/iio/adc/axp20x_adc.c @@ -745,7 +745,7 @@ fail_map: return ret; } -static int axp20x_remove(struct platform_device *pdev) +static void axp20x_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct axp20x_adc_iio *info = iio_priv(indio_dev); @@ -757,8 +757,6 @@ static int axp20x_remove(struct platform_device *pdev) if (info->data->adc_en2_mask) regmap_write(info->regmap, AXP20X_ADC_EN2, 0); - - return 0; } static struct platform_driver axp20x_adc_driver = { @@ -768,7 +766,7 @@ static struct platform_driver axp20x_adc_driver = { }, .id_table = axp20x_adc_id_match, .probe = axp20x_probe, - .remove = axp20x_remove, + .remove_new = axp20x_remove, }; module_platform_driver(axp20x_adc_driver); diff --git a/drivers/iio/adc/bcm_iproc_adc.c b/drivers/iio/adc/bcm_iproc_adc.c index 0d6885413a7e..5bc514bd5ebc 100644 --- a/drivers/iio/adc/bcm_iproc_adc.c +++ b/drivers/iio/adc/bcm_iproc_adc.c @@ -594,7 +594,7 @@ err_adc_enable: return ret; } -static int iproc_adc_remove(struct platform_device *pdev) +static void iproc_adc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct iproc_adc_priv *adc_priv = iio_priv(indio_dev); @@ -602,8 +602,6 @@ static int iproc_adc_remove(struct platform_device *pdev) iio_device_unregister(indio_dev); iproc_adc_disable(indio_dev); clk_disable_unprepare(adc_priv->adc_clk); - - return 0; } static const struct of_device_id iproc_adc_of_match[] = { @@ -614,7 +612,7 @@ MODULE_DEVICE_TABLE(of, iproc_adc_of_match); static struct platform_driver iproc_adc_driver = { .probe = iproc_adc_probe, - .remove = iproc_adc_remove, + .remove_new = iproc_adc_remove, .driver = { .name = "iproc-static-adc", .of_match_table = iproc_adc_of_match, diff --git a/drivers/iio/adc/dln2-adc.c b/drivers/iio/adc/dln2-adc.c index 97d162a3cba4..06cfbbabaf8d 100644 --- a/drivers/iio/adc/dln2-adc.c +++ b/drivers/iio/adc/dln2-adc.c @@ -691,19 +691,18 @@ unregister_event: return ret; } -static int dln2_adc_remove(struct platform_device *pdev) +static void dln2_adc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); iio_device_unregister(indio_dev); dln2_unregister_event_cb(pdev, DLN2_ADC_CONDITION_MET_EV); - return 0; } static struct platform_driver dln2_adc_driver = { .driver.name = DLN2_ADC_MOD_NAME, .probe = dln2_adc_probe, - .remove = dln2_adc_remove, + .remove_new = dln2_adc_remove, }; module_platform_driver(dln2_adc_driver); diff --git a/drivers/iio/adc/ep93xx_adc.c b/drivers/iio/adc/ep93xx_adc.c index a35e6cead67d..971942ce4c66 100644 --- a/drivers/iio/adc/ep93xx_adc.c +++ b/drivers/iio/adc/ep93xx_adc.c @@ -217,15 +217,13 @@ static int ep93xx_adc_probe(struct platform_device *pdev) return ret; } -static int ep93xx_adc_remove(struct platform_device *pdev) +static void ep93xx_adc_remove(struct platform_device *pdev) { struct iio_dev *iiodev = platform_get_drvdata(pdev); struct ep93xx_adc_priv *priv = iio_priv(iiodev); iio_device_unregister(iiodev); clk_disable_unprepare(priv->clk); - - return 0; } static const struct of_device_id ep93xx_adc_of_ids[] = { @@ -240,7 +238,7 @@ static struct platform_driver ep93xx_adc_driver = { .of_match_table = ep93xx_adc_of_ids, }, .probe = ep93xx_adc_probe, - .remove = ep93xx_adc_remove, + .remove_new = ep93xx_adc_remove, }; module_platform_driver(ep93xx_adc_driver); diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c index 43c8af41b4a9..614de9644800 100644 --- a/drivers/iio/adc/exynos_adc.c +++ b/drivers/iio/adc/exynos_adc.c @@ -950,7 +950,7 @@ err_disable_reg: return ret; } -static int exynos_adc_remove(struct platform_device *pdev) +static void exynos_adc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct exynos_adc *info = iio_priv(indio_dev); @@ -968,8 +968,6 @@ static int exynos_adc_remove(struct platform_device *pdev) exynos_adc_disable_clk(info); exynos_adc_unprepare_clk(info); regulator_disable(info->vdd); - - return 0; } static int exynos_adc_suspend(struct device *dev) @@ -1010,7 +1008,7 @@ static DEFINE_SIMPLE_DEV_PM_OPS(exynos_adc_pm_ops, exynos_adc_suspend, static struct platform_driver exynos_adc_driver = { .probe = exynos_adc_probe, - .remove = exynos_adc_remove, + .remove_new = exynos_adc_remove, .driver = { .name = "exynos-adc", .of_match_table = exynos_adc_match, diff --git a/drivers/iio/adc/fsl-imx25-gcq.c b/drivers/iio/adc/fsl-imx25-gcq.c index 551e83ae573c..68c813de0605 100644 --- a/drivers/iio/adc/fsl-imx25-gcq.c +++ b/drivers/iio/adc/fsl-imx25-gcq.c @@ -384,7 +384,7 @@ err_regulator_disable: return ret; } -static int mx25_gcq_remove(struct platform_device *pdev) +static void mx25_gcq_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct mx25_gcq_priv *priv = iio_priv(indio_dev); @@ -397,8 +397,6 @@ static int mx25_gcq_remove(struct platform_device *pdev) if (priv->vref[i]) regulator_disable(priv->vref[i]); } - - return 0; } static const struct of_device_id mx25_gcq_ids[] = { @@ -413,7 +411,7 @@ static struct platform_driver mx25_gcq_driver = { .of_match_table = mx25_gcq_ids, }, .probe = mx25_gcq_probe, - .remove = mx25_gcq_remove, + .remove_new = mx25_gcq_remove, }; module_platform_driver(mx25_gcq_driver); diff --git a/drivers/iio/adc/hx711.c b/drivers/iio/adc/hx711.c index f7ee856a6b8b..c80c55fb8c6c 100644 --- a/drivers/iio/adc/hx711.c +++ b/drivers/iio/adc/hx711.c @@ -580,7 +580,7 @@ error_regulator: return ret; } -static int hx711_remove(struct platform_device *pdev) +static void hx711_remove(struct platform_device *pdev) { struct hx711_data *hx711_data; struct iio_dev *indio_dev; @@ -593,8 +593,6 @@ static int hx711_remove(struct platform_device *pdev) iio_triggered_buffer_cleanup(indio_dev); regulator_disable(hx711_data->reg_avdd); - - return 0; } static const struct of_device_id of_hx711_match[] = { @@ -606,7 +604,7 @@ MODULE_DEVICE_TABLE(of, of_hx711_match); static struct platform_driver hx711_driver = { .probe = hx711_probe, - .remove = hx711_remove, + .remove_new = hx711_remove, .driver = { .name = "hx711-gpio", .of_match_table = of_hx711_match, diff --git a/drivers/iio/adc/imx8qxp-adc.c b/drivers/iio/adc/imx8qxp-adc.c index fff6e5a2d956..fe82198170d5 100644 --- a/drivers/iio/adc/imx8qxp-adc.c +++ b/drivers/iio/adc/imx8qxp-adc.c @@ -404,7 +404,7 @@ error_regulator_disable: return ret; } -static int imx8qxp_adc_remove(struct platform_device *pdev) +static void imx8qxp_adc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct imx8qxp_adc *adc = iio_priv(indio_dev); @@ -422,8 +422,6 @@ static int imx8qxp_adc_remove(struct platform_device *pdev) pm_runtime_disable(dev); pm_runtime_put_noidle(dev); - - return 0; } static int imx8qxp_adc_runtime_suspend(struct device *dev) @@ -489,7 +487,7 @@ MODULE_DEVICE_TABLE(of, imx8qxp_adc_match); static struct platform_driver imx8qxp_adc_driver = { .probe = imx8qxp_adc_probe, - .remove = imx8qxp_adc_remove, + .remove_new = imx8qxp_adc_remove, .driver = { .name = ADC_DRIVER_NAME, .of_match_table = imx8qxp_adc_match, diff --git a/drivers/iio/adc/imx93_adc.c b/drivers/iio/adc/imx93_adc.c index dce9ec91e4a7..9bb1e4ba1aee 100644 --- a/drivers/iio/adc/imx93_adc.c +++ b/drivers/iio/adc/imx93_adc.c @@ -392,7 +392,7 @@ error_regulator_disable: return ret; } -static int imx93_adc_remove(struct platform_device *pdev) +static void imx93_adc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct imx93_adc *adc = iio_priv(indio_dev); @@ -410,8 +410,6 @@ static int imx93_adc_remove(struct platform_device *pdev) free_irq(adc->irq, adc); clk_disable_unprepare(adc->ipg_clk); regulator_disable(adc->vref); - - return 0; } static int imx93_adc_runtime_suspend(struct device *dev) @@ -468,7 +466,7 @@ MODULE_DEVICE_TABLE(of, imx93_adc_match); static struct platform_driver imx93_adc_driver = { .probe = imx93_adc_probe, - .remove = imx93_adc_remove, + .remove_new = imx93_adc_remove, .driver = { .name = IMX93_ADC_DRIVER_NAME, .of_match_table = imx93_adc_match, diff --git a/drivers/iio/adc/ltc2309.c b/drivers/iio/adc/ltc2309.c new file mode 100644 index 000000000000..8b3a89c1b840 --- /dev/null +++ b/drivers/iio/adc/ltc2309.c @@ -0,0 +1,246 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * The LTC2309 is an 8-Channel, 12-Bit SAR ADC with an I2C Interface. + * + * Datasheet: + * https://www.analog.com/media/en/technical-documentation/data-sheets/2309fd.pdf + * + * Copyright (c) 2023, Liam Beguin <liambeguin@gmail.com> + */ +#include <linux/bitfield.h> +#include <linux/i2c.h> +#include <linux/iio/iio.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/regulator/consumer.h> + +#define LTC2309_ADC_RESOLUTION 12 + +#define LTC2309_DIN_CH_MASK GENMASK(7, 4) +#define LTC2309_DIN_SDN BIT(7) +#define LTC2309_DIN_OSN BIT(6) +#define LTC2309_DIN_S1 BIT(5) +#define LTC2309_DIN_S0 BIT(4) +#define LTC2309_DIN_UNI BIT(3) +#define LTC2309_DIN_SLEEP BIT(2) + +/** + * struct ltc2309 - internal device data structure + * @dev: Device reference + * @client: I2C reference + * @vref: External reference source + * @lock: Lock to serialize data access + * @vref_mv: Internal voltage reference + */ +struct ltc2309 { + struct device *dev; + struct i2c_client *client; + struct regulator *vref; + struct mutex lock; /* serialize data access */ + int vref_mv; +}; + +/* Order matches expected channel address, See datasheet Table 1. */ +enum ltc2309_channels { + LTC2309_CH0_CH1 = 0, + LTC2309_CH2_CH3, + LTC2309_CH4_CH5, + LTC2309_CH6_CH7, + LTC2309_CH1_CH0, + LTC2309_CH3_CH2, + LTC2309_CH5_CH4, + LTC2309_CH7_CH6, + LTC2309_CH0, + LTC2309_CH2, + LTC2309_CH4, + LTC2309_CH6, + LTC2309_CH1, + LTC2309_CH3, + LTC2309_CH5, + LTC2309_CH7, +}; + +#define LTC2309_CHAN(_chan, _addr) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .address = _addr, \ + .channel = _chan, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ +} + +#define LTC2309_DIFF_CHAN(_chan, _chan2, _addr) { \ + .type = IIO_VOLTAGE, \ + .differential = 1, \ + .indexed = 1, \ + .address = _addr, \ + .channel = _chan, \ + .channel2 = _chan2, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ +} + +static const struct iio_chan_spec ltc2309_channels[] = { + LTC2309_CHAN(0, LTC2309_CH0), + LTC2309_CHAN(1, LTC2309_CH1), + LTC2309_CHAN(2, LTC2309_CH2), + LTC2309_CHAN(3, LTC2309_CH3), + LTC2309_CHAN(4, LTC2309_CH4), + LTC2309_CHAN(5, LTC2309_CH5), + LTC2309_CHAN(6, LTC2309_CH6), + LTC2309_CHAN(7, LTC2309_CH7), + LTC2309_DIFF_CHAN(0, 1, LTC2309_CH0_CH1), + LTC2309_DIFF_CHAN(2, 3, LTC2309_CH2_CH3), + LTC2309_DIFF_CHAN(4, 5, LTC2309_CH4_CH5), + LTC2309_DIFF_CHAN(6, 7, LTC2309_CH6_CH7), + LTC2309_DIFF_CHAN(1, 0, LTC2309_CH1_CH0), + LTC2309_DIFF_CHAN(3, 2, LTC2309_CH3_CH2), + LTC2309_DIFF_CHAN(5, 4, LTC2309_CH5_CH4), + LTC2309_DIFF_CHAN(7, 6, LTC2309_CH7_CH6), +}; + +static int ltc2309_read_raw_channel(struct ltc2309 *ltc2309, + unsigned long address, int *val) +{ + int ret; + u16 buf; + u8 din; + + din = FIELD_PREP(LTC2309_DIN_CH_MASK, address & 0x0f) | + FIELD_PREP(LTC2309_DIN_UNI, 1) | + FIELD_PREP(LTC2309_DIN_SLEEP, 0); + + ret = i2c_smbus_write_byte(ltc2309->client, din); + if (ret < 0) { + dev_err(ltc2309->dev, "i2c command failed: %pe\n", + ERR_PTR(ret)); + return ret; + } + + ret = i2c_master_recv(ltc2309->client, (char *)&buf, 2); + if (ret < 0) { + dev_err(ltc2309->dev, "i2c read failed: %pe\n", ERR_PTR(ret)); + return ret; + } + + *val = be16_to_cpu(buf) >> 4; + + return ret; +} + +static int ltc2309_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct ltc2309 *ltc2309 = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(<c2309->lock); + ret = ltc2309_read_raw_channel(ltc2309, chan->address, val); + mutex_unlock(<c2309->lock); + if (ret < 0) + return -EINVAL; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = ltc2309->vref_mv; + *val2 = LTC2309_ADC_RESOLUTION; + return IIO_VAL_FRACTIONAL_LOG2; + default: + return -EINVAL; + } +} + +static const struct iio_info ltc2309_info = { + .read_raw = ltc2309_read_raw, +}; + +static void ltc2309_regulator_disable(void *regulator) +{ + regulator_disable(regulator); +} + +static int ltc2309_probe(struct i2c_client *client) +{ + struct iio_dev *indio_dev; + struct ltc2309 *ltc2309; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*ltc2309)); + if (!indio_dev) + return -ENOMEM; + + ltc2309 = iio_priv(indio_dev); + ltc2309->dev = &indio_dev->dev; + ltc2309->client = client; + ltc2309->vref_mv = 4096; /* Default to the internal ref */ + + indio_dev->name = "ltc2309"; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = ltc2309_channels; + indio_dev->num_channels = ARRAY_SIZE(ltc2309_channels); + indio_dev->info = <c2309_info; + + ltc2309->vref = devm_regulator_get_optional(&client->dev, "vref"); + if (IS_ERR(ltc2309->vref)) { + ret = PTR_ERR(ltc2309->vref); + if (ret == -ENODEV) + ltc2309->vref = NULL; + else + return ret; + } + + if (ltc2309->vref) { + ret = regulator_enable(ltc2309->vref); + if (ret) + return dev_err_probe(ltc2309->dev, ret, + "failed to enable vref\n"); + + ret = devm_add_action_or_reset(ltc2309->dev, + ltc2309_regulator_disable, + ltc2309->vref); + if (ret) { + return dev_err_probe(ltc2309->dev, ret, + "failed to add regulator_disable action: %d\n", + ret); + } + + ret = regulator_get_voltage(ltc2309->vref); + if (ret < 0) + return ret; + + ltc2309->vref_mv = ret / 1000; + } + + mutex_init(<c2309->lock); + + return devm_iio_device_register(&client->dev, indio_dev); +} + +static const struct of_device_id ltc2309_of_match[] = { + { .compatible = "lltc,ltc2309" }, + { } +}; +MODULE_DEVICE_TABLE(of, ltc2309_of_match); + +static const struct i2c_device_id ltc2309_id[] = { + { "ltc2309" }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ltc2309_id); + +static struct i2c_driver ltc2309_driver = { + .driver = { + .name = "ltc2309", + .of_match_table = ltc2309_of_match, + }, + .probe = ltc2309_probe, + .id_table = ltc2309_id, +}; +module_i2c_driver(ltc2309_driver); + +MODULE_AUTHOR("Liam Beguin <liambeguin@gmail.com>"); +MODULE_DESCRIPTION("Linear Technology LTC2309 ADC"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/ltc2497.c b/drivers/iio/adc/ltc2497.c index 5bdd40729611..6401a7727c31 100644 --- a/drivers/iio/adc/ltc2497.c +++ b/drivers/iio/adc/ltc2497.c @@ -95,7 +95,6 @@ static int ltc2497_result_and_measure(struct ltc2497core_driverdata *ddata, static int ltc2497_probe(struct i2c_client *client) { - const struct i2c_device_id *id = i2c_client_get_device_id(client); const struct ltc2497_chip_info *chip_info; struct iio_dev *indio_dev; struct ltc2497_driverdata *st; @@ -115,9 +114,7 @@ static int ltc2497_probe(struct i2c_client *client) st->client = client; st->common_ddata.result_and_measure = ltc2497_result_and_measure; - chip_info = device_get_match_data(dev); - if (!chip_info) - chip_info = (const struct ltc2497_chip_info *)id->driver_data; + chip_info = i2c_get_match_data(client); st->common_ddata.chip_info = chip_info; resolution = chip_info->resolution; diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c index b31581616ce3..7c2a98b8c3a9 100644 --- a/drivers/iio/adc/max1363.c +++ b/drivers/iio/adc/max1363.c @@ -1599,9 +1599,7 @@ static int max1363_probe(struct i2c_client *client) if (ret) return ret; - st->chip_info = device_get_match_data(&client->dev); - if (!st->chip_info) - st->chip_info = &max1363_chip_info_tbl[id->driver_data]; + st->chip_info = i2c_get_match_data(client); st->client = client; st->vref_uv = st->chip_info->int_vref_mv * 1000; @@ -1669,46 +1667,51 @@ static int max1363_probe(struct i2c_client *client) return devm_iio_device_register(&client->dev, indio_dev); } +#define MAX1363_ID_TABLE(_name, cfg) { \ + .name = _name, \ + .driver_data = (kernel_ulong_t)&max1363_chip_info_tbl[cfg], \ +} + static const struct i2c_device_id max1363_id[] = { - { "max1361", max1361 }, - { "max1362", max1362 }, - { "max1363", max1363 }, - { "max1364", max1364 }, - { "max1036", max1036 }, - { "max1037", max1037 }, - { "max1038", max1038 }, - { "max1039", max1039 }, - { "max1136", max1136 }, - { "max1137", max1137 }, - { "max1138", max1138 }, - { "max1139", max1139 }, - { "max1236", max1236 }, - { "max1237", max1237 }, - { "max1238", max1238 }, - { "max1239", max1239 }, - { "max11600", max11600 }, - { "max11601", max11601 }, - { "max11602", max11602 }, - { "max11603", max11603 }, - { "max11604", max11604 }, - { "max11605", max11605 }, - { "max11606", max11606 }, - { "max11607", max11607 }, - { "max11608", max11608 }, - { "max11609", max11609 }, - { "max11610", max11610 }, - { "max11611", max11611 }, - { "max11612", max11612 }, - { "max11613", max11613 }, - { "max11614", max11614 }, - { "max11615", max11615 }, - { "max11616", max11616 }, - { "max11617", max11617 }, - { "max11644", max11644 }, - { "max11645", max11645 }, - { "max11646", max11646 }, - { "max11647", max11647 }, - {} + MAX1363_ID_TABLE("max1361", max1361), + MAX1363_ID_TABLE("max1362", max1362), + MAX1363_ID_TABLE("max1363", max1363), + MAX1363_ID_TABLE("max1364", max1364), + MAX1363_ID_TABLE("max1036", max1036), + MAX1363_ID_TABLE("max1037", max1037), + MAX1363_ID_TABLE("max1038", max1038), + MAX1363_ID_TABLE("max1039", max1039), + MAX1363_ID_TABLE("max1136", max1136), + MAX1363_ID_TABLE("max1137", max1137), + MAX1363_ID_TABLE("max1138", max1138), + MAX1363_ID_TABLE("max1139", max1139), + MAX1363_ID_TABLE("max1236", max1236), + MAX1363_ID_TABLE("max1237", max1237), + MAX1363_ID_TABLE("max1238", max1238), + MAX1363_ID_TABLE("max1239", max1239), + MAX1363_ID_TABLE("max11600", max11600), + MAX1363_ID_TABLE("max11601", max11601), + MAX1363_ID_TABLE("max11602", max11602), + MAX1363_ID_TABLE("max11603", max11603), + MAX1363_ID_TABLE("max11604", max11604), + MAX1363_ID_TABLE("max11605", max11605), + MAX1363_ID_TABLE("max11606", max11606), + MAX1363_ID_TABLE("max11607", max11607), + MAX1363_ID_TABLE("max11608", max11608), + MAX1363_ID_TABLE("max11609", max11609), + MAX1363_ID_TABLE("max11610", max11610), + MAX1363_ID_TABLE("max11611", max11611), + MAX1363_ID_TABLE("max11612", max11612), + MAX1363_ID_TABLE("max11613", max11613), + MAX1363_ID_TABLE("max11614", max11614), + MAX1363_ID_TABLE("max11615", max11615), + MAX1363_ID_TABLE("max11616", max11616), + MAX1363_ID_TABLE("max11617", max11617), + MAX1363_ID_TABLE("max11644", max11644), + MAX1363_ID_TABLE("max11645", max11645), + MAX1363_ID_TABLE("max11646", max11646), + MAX1363_ID_TABLE("max11647", max11647), + { /* sentinel */ } }; MODULE_DEVICE_TABLE(i2c, max1363_id); diff --git a/drivers/iio/adc/mcp3564.c b/drivers/iio/adc/mcp3564.c new file mode 100644 index 000000000000..e3f1de5fcc5a --- /dev/null +++ b/drivers/iio/adc/mcp3564.c @@ -0,0 +1,1513 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * IIO driver for MCP356X/MCP356XR and MCP346X/MCP346XR series ADC chip family + * + * Copyright (C) 2022-2023 Microchip Technology Inc. and its subsidiaries + * + * Author: Marius Cristea <marius.cristea@microchip.com> + * + * Datasheet for MCP3561, MCP3562, MCP3564 can be found here: + * https://ww1.microchip.com/downloads/aemDocuments/documents/MSLD/ProductDocuments/DataSheets/MCP3561-2-4-Family-Data-Sheet-DS20006181C.pdf + * Datasheet for MCP3561R, MCP3562R, MCP3564R can be found here: + * https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3561_2_4R-Data-Sheet-DS200006391C.pdf + * Datasheet for MCP3461, MCP3462, MCP3464 can be found here: + * https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3461-2-4-Two-Four-Eight-Channel-153.6-ksps-Low-Noise-16-Bit-Delta-Sigma-ADC-Data-Sheet-20006180D.pdf + * Datasheet for MCP3461R, MCP3462R, MCP3464R can be found here: + * https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3461-2-4R-Family-Data-Sheet-DS20006404C.pdf + */ + +#include <linux/bitfield.h> +#include <linux/iopoll.h> +#include <linux/regulator/consumer.h> +#include <linux/spi/spi.h> +#include <linux/units.h> +#include <linux/util_macros.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +#define MCP3564_ADCDATA_REG 0x00 + +#define MCP3564_CONFIG0_REG 0x01 +#define MCP3564_CONFIG0_ADC_MODE_MASK GENMASK(1, 0) +/* Current Source/Sink Selection Bits for Sensor Bias */ +#define MCP3564_CONFIG0_CS_SEL_MASK GENMASK(3, 2) +/* Internal clock is selected and AMCLK is present on the analog master clock output pin */ +#define MCP3564_CONFIG0_USE_INT_CLK_OUTPUT_EN 0x03 +/* Internal clock is selected and no clock output is present on the CLK pin */ +#define MCP3564_CONFIG0_USE_INT_CLK 0x02 +/* External digital clock */ +#define MCP3564_CONFIG0_USE_EXT_CLK 0x01 +/* External digital clock (default) */ +#define MCP3564_CONFIG0_USE_EXT_CLK_DEFAULT 0x00 +#define MCP3564_CONFIG0_CLK_SEL_MASK GENMASK(5, 4) +#define MCP3456_CONFIG0_BIT6_DEFAULT BIT(6) +#define MCP3456_CONFIG0_VREF_MASK BIT(7) + +#define MCP3564_CONFIG1_REG 0x02 +#define MCP3564_CONFIG1_OVERSPL_RATIO_MASK GENMASK(5, 2) + +#define MCP3564_CONFIG2_REG 0x03 +#define MCP3564_CONFIG2_AZ_REF_MASK BIT(1) +#define MCP3564_CONFIG2_AZ_MUX_MASK BIT(2) + +#define MCP3564_CONFIG2_HARDWARE_GAIN_MASK GENMASK(5, 3) +#define MCP3564_DEFAULT_HARDWARE_GAIN 0x01 +#define MCP3564_CONFIG2_BOOST_CURRENT_MASK GENMASK(7, 6) + +#define MCP3564_CONFIG3_REG 0x04 +#define MCP3464_CONFIG3_EN_GAINCAL_MASK BIT(0) +#define MCP3464_CONFIG3_EN_OFFCAL_MASK BIT(1) +#define MCP3464_CONFIG3_EN_CRCCOM_MASK BIT(2) +#define MCP3464_CONFIG3_CRC_FORMAT_MASK BIT(3) +/* + * ADC Output Data Format 32-bit (25-bit right justified data + Channel ID): + * CHID[3:0] + SGN extension (4 bits) + 24-bit ADC data. + * It allows overrange with the SGN extension. + */ +#define MCP3464_CONFIG3_DATA_FMT_32B_WITH_CH_ID 3 +/* + * ADC Output Data Format 32-bit (25-bit right justified data): + * SGN extension (8-bit) + 24-bit ADC data. + * It allows overrange with the SGN extension. + */ +#define MCP3464_CONFIG3_DATA_FMT_32B_SGN_EXT 2 +/* + * ADC Output Data Format 32-bit (24-bit left justified data): + * 24-bit ADC data + 0x00 (8-bit). + * It does not allow overrange (ADC code locked to 0xFFFFFF or 0x800000). + */ +#define MCP3464_CONFIG3_DATA_FMT_32B_LEFT_JUSTIFIED 1 +/* + * ADC Output Data Format 24-bit (default ADC coding): + * 24-bit ADC data. + * It does not allow overrange (ADC code locked to 0xFFFFFF or 0x800000). + */ +#define MCP3464_CONFIG3_DATA_FMT_24B 0 +#define MCP3464_CONFIG3_DATA_FORMAT_MASK GENMASK(5, 4) + +/* Continuous Conversion mode or continuous conversion cycle in SCAN mode. */ +#define MCP3464_CONFIG3_CONV_MODE_CONTINUOUS 3 +/* + * One-shot conversion or one-shot cycle in SCAN mode. It sets ADC_MODE[1:0] to ‘10’ + * (standby) at the end of the conversion or at the end of the conversion cycle in SCAN mode. + */ +#define MCP3464_CONFIG3_CONV_MODE_ONE_SHOT_STANDBY 2 +/* + * One-shot conversion or one-shot cycle in SCAN mode. It sets ADC_MODE[1:0] to ‘0x’ (ADC + * Shutdown) at the end of the conversion or at the end of the conversion cycle in SCAN + * mode (default). + */ +#define MCP3464_CONFIG3_CONV_MODE_ONE_SHOT_SHUTDOWN 0 +#define MCP3464_CONFIG3_CONV_MODE_MASK GENMASK(7, 6) + +#define MCP3564_IRQ_REG 0x05 +#define MCP3464_EN_STP_MASK BIT(0) +#define MCP3464_EN_FASTCMD_MASK BIT(1) +#define MCP3464_IRQ_MODE_0_MASK BIT(2) +#define MCP3464_IRQ_MODE_1_MASK BIT(3) +#define MCP3564_POR_STATUS_MASK BIT(4) +#define MCP3564_CRCCFG_STATUS_MASK BIT(5) +#define MCP3564_DATA_READY_MASK BIT(6) + +#define MCP3564_MUX_REG 0x06 +#define MCP3564_MUX_VIN_P_MASK GENMASK(7, 4) +#define MCP3564_MUX_VIN_N_MASK GENMASK(3, 0) +#define MCP3564_MUX_SET(x, y) (FIELD_PREP(MCP3564_MUX_VIN_P_MASK, (x)) | \ + FIELD_PREP(MCP3564_MUX_VIN_N_MASK, (y))) + +#define MCP3564_SCAN_REG 0x07 +#define MCP3564_SCAN_CH_SEL_MASK GENMASK(15, 0) +#define MCP3564_SCAN_CH_SEL_SET(x) FIELD_PREP(MCP3564_SCAN_CH_SEL_MASK, (x)) +#define MCP3564_SCAN_DELAY_TIME_MASK GENMASK(23, 21) +#define MCP3564_SCAN_DELAY_TIME_SET(x) FIELD_PREP(MCP3564_SCAN_DELAY_TIME_MASK, (x)) +#define MCP3564_SCAN_DEFAULT_VALUE 0 + +#define MCP3564_TIMER_REG 0x08 +#define MCP3564_TIMER_DEFAULT_VALUE 0 + +#define MCP3564_OFFSETCAL_REG 0x09 +#define MCP3564_DEFAULT_OFFSETCAL 0 + +#define MCP3564_GAINCAL_REG 0x0A +#define MCP3564_DEFAULT_GAINCAL 0x00800000 + +#define MCP3564_RESERVED_B_REG 0x0B + +#define MCP3564_RESERVED_C_REG 0x0C +#define MCP3564_C_REG_DEFAULT 0x50 +#define MCP3564R_C_REG_DEFAULT 0x30 + +#define MCP3564_LOCK_REG 0x0D +#define MCP3564_LOCK_WRITE_ACCESS_PASSWORD 0xA5 +#define MCP3564_RESERVED_E_REG 0x0E +#define MCP3564_CRCCFG_REG 0x0F + +#define MCP3564_CMD_HW_ADDR_MASK GENMASK(7, 6) +#define MCP3564_CMD_ADDR_MASK GENMASK(5, 2) + +#define MCP3564_HW_ADDR_MASK GENMASK(1, 0) + +#define MCP3564_FASTCMD_START 0x0A +#define MCP3564_FASTCMD_RESET 0x0E + +#define MCP3461_HW_ID 0x0008 +#define MCP3462_HW_ID 0x0009 +#define MCP3464_HW_ID 0x000B + +#define MCP3561_HW_ID 0x000C +#define MCP3562_HW_ID 0x000D +#define MCP3564_HW_ID 0x000F +#define MCP3564_HW_ID_MASK GENMASK(3, 0) + +#define MCP3564R_INT_VREF_MV 2400 + +#define MCP3564_DATA_READY_TIMEOUT_MS 2000 + +#define MCP3564_MAX_PGA 8 +#define MCP3564_MAX_BURNOUT_IDX 4 +#define MCP3564_MAX_CHANNELS 66 + +enum mcp3564_ids { + mcp3461, + mcp3462, + mcp3464, + mcp3561, + mcp3562, + mcp3564, + mcp3461r, + mcp3462r, + mcp3464r, + mcp3561r, + mcp3562r, + mcp3564r, +}; + +enum mcp3564_delay_time { + MCP3564_NO_DELAY, + MCP3564_DELAY_8_DMCLK, + MCP3564_DELAY_16_DMCLK, + MCP3564_DELAY_32_DMCLK, + MCP3564_DELAY_64_DMCLK, + MCP3564_DELAY_128_DMCLK, + MCP3564_DELAY_256_DMCLK, + MCP3564_DELAY_512_DMCLK +}; + +enum mcp3564_adc_conversion_mode { + MCP3564_ADC_MODE_DEFAULT, + MCP3564_ADC_MODE_SHUTDOWN, + MCP3564_ADC_MODE_STANDBY, + MCP3564_ADC_MODE_CONVERSION +}; + +enum mcp3564_adc_bias_current { + MCP3564_BOOST_CURRENT_x0_50, + MCP3564_BOOST_CURRENT_x0_66, + MCP3564_BOOST_CURRENT_x1_00, + MCP3564_BOOST_CURRENT_x2_00 +}; + +enum mcp3564_burnout { + MCP3564_CONFIG0_CS_SEL_0_0_uA, + MCP3564_CONFIG0_CS_SEL_0_9_uA, + MCP3564_CONFIG0_CS_SEL_3_7_uA, + MCP3564_CONFIG0_CS_SEL_15_uA +}; + +enum mcp3564_channel_names { + MCP3564_CH0, + MCP3564_CH1, + MCP3564_CH2, + MCP3564_CH3, + MCP3564_CH4, + MCP3564_CH5, + MCP3564_CH6, + MCP3564_CH7, + MCP3564_AGND, + MCP3564_AVDD, + MCP3564_RESERVED, /* do not use */ + MCP3564_REFIN_POZ, + MCP3564_REFIN_NEG, + MCP3564_TEMP_DIODE_P, + MCP3564_TEMP_DIODE_M, + MCP3564_INTERNAL_VCM, +}; + +enum mcp3564_oversampling { + MCP3564_OVERSAMPLING_RATIO_32, + MCP3564_OVERSAMPLING_RATIO_64, + MCP3564_OVERSAMPLING_RATIO_128, + MCP3564_OVERSAMPLING_RATIO_256, + MCP3564_OVERSAMPLING_RATIO_512, + MCP3564_OVERSAMPLING_RATIO_1024, + MCP3564_OVERSAMPLING_RATIO_2048, + MCP3564_OVERSAMPLING_RATIO_4096, + MCP3564_OVERSAMPLING_RATIO_8192, + MCP3564_OVERSAMPLING_RATIO_16384, + MCP3564_OVERSAMPLING_RATIO_20480, + MCP3564_OVERSAMPLING_RATIO_24576, + MCP3564_OVERSAMPLING_RATIO_40960, + MCP3564_OVERSAMPLING_RATIO_49152, + MCP3564_OVERSAMPLING_RATIO_81920, + MCP3564_OVERSAMPLING_RATIO_98304 +}; + +static const unsigned int mcp3564_oversampling_avail[] = { + [MCP3564_OVERSAMPLING_RATIO_32] = 32, + [MCP3564_OVERSAMPLING_RATIO_64] = 64, + [MCP3564_OVERSAMPLING_RATIO_128] = 128, + [MCP3564_OVERSAMPLING_RATIO_256] = 256, + [MCP3564_OVERSAMPLING_RATIO_512] = 512, + [MCP3564_OVERSAMPLING_RATIO_1024] = 1024, + [MCP3564_OVERSAMPLING_RATIO_2048] = 2048, + [MCP3564_OVERSAMPLING_RATIO_4096] = 4096, + [MCP3564_OVERSAMPLING_RATIO_8192] = 8192, + [MCP3564_OVERSAMPLING_RATIO_16384] = 16384, + [MCP3564_OVERSAMPLING_RATIO_20480] = 20480, + [MCP3564_OVERSAMPLING_RATIO_24576] = 24576, + [MCP3564_OVERSAMPLING_RATIO_40960] = 40960, + [MCP3564_OVERSAMPLING_RATIO_49152] = 49152, + [MCP3564_OVERSAMPLING_RATIO_81920] = 81920, + [MCP3564_OVERSAMPLING_RATIO_98304] = 98304 +}; + +/* + * Current Source/Sink Selection Bits for Sensor Bias (source on VIN+/sink on VIN-) + */ +static const int mcp3564_burnout_avail[][2] = { + [MCP3564_CONFIG0_CS_SEL_0_0_uA] = { 0, 0 }, + [MCP3564_CONFIG0_CS_SEL_0_9_uA] = { 0, 900 }, + [MCP3564_CONFIG0_CS_SEL_3_7_uA] = { 0, 3700 }, + [MCP3564_CONFIG0_CS_SEL_15_uA] = { 0, 15000 } +}; + +/* + * BOOST[1:0]: ADC Bias Current Selection + */ +static const char * const mcp3564_boost_current_avail[] = { + [MCP3564_BOOST_CURRENT_x0_50] = "0.5", + [MCP3564_BOOST_CURRENT_x0_66] = "0.66", + [MCP3564_BOOST_CURRENT_x1_00] = "1", + [MCP3564_BOOST_CURRENT_x2_00] = "2", +}; + +/* + * Calibration bias values + */ +static const int mcp3564_calib_bias[] = { + -8388608, /* min: -2^23 */ + 1, /* step: 1 */ + 8388607 /* max: 2^23 - 1 */ +}; + +/* + * Calibration scale values + * The Gain Error Calibration register (GAINCAL) is an + * unsigned 24-bit register that holds the digital gain error + * calibration value, GAINCAL which could be calculated by + * GAINCAL (V/V) = (GAINCAL[23:0])/8388608 + * The gain error calibration value range in equivalent voltage is [0; 2-2^(-23)] + */ +static const unsigned int mcp3564_calib_scale[] = { + 0, /* min: 0 */ + 1, /* step: 1/8388608 */ + 16777215 /* max: 2 - 2^(-23) */ +}; + +/* Programmable hardware gain x1/3, x1, x2, x4, x8, x16, x32, x64 */ +static const int mcp3564_hwgain_frac[] = { + 3, 10, + 1, 1, + 2, 1, + 4, 1, + 8, 1, + 16, 1, + 32, 1, + 64, 1 +}; + +static const char *mcp3564_channel_labels[2] = { + "burnout_current", "temperature", +}; + +/** + * struct mcp3564_chip_info - chip specific data + * @name: device name + * @num_channels: number of channels + * @resolution: ADC resolution + * @have_vref: does the hardware have an internal voltage reference? + */ +struct mcp3564_chip_info { + const char *name; + unsigned int num_channels; + unsigned int resolution; + bool have_vref; +}; + +/** + * struct mcp3564_state - working data for a ADC device + * @chip_info: chip specific data + * @spi: SPI device structure + * @vref: the regulator device used as a voltage reference in case + * external voltage reference is used + * @vref_mv: voltage reference value in miliVolts + * @lock: synchronize access to driver's state members + * @dev_addr: hardware device address + * @oversampling: the index inside oversampling list of the ADC + * @hwgain: the index inside hardware gain list of the ADC + * @scale_tbls: table with precalculated scale + * @calib_bias: calibration bias value + * @calib_scale: calibration scale value + * @current_boost_mode: the index inside current boost list of the ADC + * @burnout_mode: the index inside current bias list of the ADC + * @auto_zeroing_mux: set if ADC auto-zeroing algorithm is enabled + * @auto_zeroing_ref: set if ADC auto-Zeroing Reference Buffer Setting is enabled + * @have_vref: does the ADC have an internal voltage reference? + * @labels: table with channels labels + */ +struct mcp3564_state { + const struct mcp3564_chip_info *chip_info; + struct spi_device *spi; + struct regulator *vref; + unsigned short vref_mv; + struct mutex lock; /* Synchronize access to driver's state members */ + u8 dev_addr; + enum mcp3564_oversampling oversampling; + unsigned int hwgain; + unsigned int scale_tbls[MCP3564_MAX_PGA][2]; + int calib_bias; + int calib_scale; + unsigned int current_boost_mode; + enum mcp3564_burnout burnout_mode; + bool auto_zeroing_mux; + bool auto_zeroing_ref; + bool have_vref; + const char *labels[MCP3564_MAX_CHANNELS]; +}; + +static inline u8 mcp3564_cmd_write(u8 chip_addr, u8 reg) +{ + return FIELD_PREP(MCP3564_CMD_HW_ADDR_MASK, chip_addr) | + FIELD_PREP(MCP3564_CMD_ADDR_MASK, reg) | + BIT(1); +} + +static inline u8 mcp3564_cmd_read(u8 chip_addr, u8 reg) +{ + return FIELD_PREP(MCP3564_CMD_HW_ADDR_MASK, chip_addr) | + FIELD_PREP(MCP3564_CMD_ADDR_MASK, reg) | + BIT(0); +} + +static int mcp3564_read_8bits(struct mcp3564_state *adc, u8 reg, u8 *val) +{ + int ret; + u8 tx_buf; + u8 rx_buf; + + tx_buf = mcp3564_cmd_read(adc->dev_addr, reg); + + ret = spi_write_then_read(adc->spi, &tx_buf, sizeof(tx_buf), + &rx_buf, sizeof(rx_buf)); + *val = rx_buf; + + return ret; +} + +static int mcp3564_read_16bits(struct mcp3564_state *adc, u8 reg, u16 *val) +{ + int ret; + u8 tx_buf; + __be16 rx_buf; + + tx_buf = mcp3564_cmd_read(adc->dev_addr, reg); + + ret = spi_write_then_read(adc->spi, &tx_buf, sizeof(tx_buf), + &rx_buf, sizeof(rx_buf)); + *val = be16_to_cpu(rx_buf); + + return ret; +} + +static int mcp3564_read_32bits(struct mcp3564_state *adc, u8 reg, u32 *val) +{ + int ret; + u8 tx_buf; + __be32 rx_buf; + + tx_buf = mcp3564_cmd_read(adc->dev_addr, reg); + + ret = spi_write_then_read(adc->spi, &tx_buf, sizeof(tx_buf), + &rx_buf, sizeof(rx_buf)); + *val = be32_to_cpu(rx_buf); + + return ret; +} + +static int mcp3564_write_8bits(struct mcp3564_state *adc, u8 reg, u8 val) +{ + u8 tx_buf[2]; + + tx_buf[0] = mcp3564_cmd_write(adc->dev_addr, reg); + tx_buf[1] = val; + + return spi_write_then_read(adc->spi, tx_buf, sizeof(tx_buf), NULL, 0); +} + +static int mcp3564_write_24bits(struct mcp3564_state *adc, u8 reg, u32 val) +{ + __be32 val_be; + + val |= (mcp3564_cmd_write(adc->dev_addr, reg) << 24); + val_be = cpu_to_be32(val); + + return spi_write_then_read(adc->spi, &val_be, sizeof(val_be), NULL, 0); +} + +static int mcp3564_fast_cmd(struct mcp3564_state *adc, u8 fast_cmd) +{ + u8 val; + + val = FIELD_PREP(MCP3564_CMD_HW_ADDR_MASK, adc->dev_addr) | + FIELD_PREP(MCP3564_CMD_ADDR_MASK, fast_cmd); + + return spi_write_then_read(adc->spi, &val, 1, NULL, 0); +} + +static int mcp3564_update_8bits(struct mcp3564_state *adc, u8 reg, u32 mask, u8 val) +{ + u8 tmp; + int ret; + + val &= mask; + + ret = mcp3564_read_8bits(adc, reg, &tmp); + if (ret < 0) + return ret; + + tmp &= ~mask; + tmp |= val; + + return mcp3564_write_8bits(adc, reg, tmp); +} + +static int mcp3564_set_current_boost_mode(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + unsigned int mode) +{ + struct mcp3564_state *adc = iio_priv(indio_dev); + int ret; + + dev_dbg(&indio_dev->dev, "%s: %d\n", __func__, mode); + + mutex_lock(&adc->lock); + ret = mcp3564_update_8bits(adc, MCP3564_CONFIG2_REG, MCP3564_CONFIG2_BOOST_CURRENT_MASK, + FIELD_PREP(MCP3564_CONFIG2_BOOST_CURRENT_MASK, mode)); + + if (ret) + dev_err(&indio_dev->dev, "Failed to configure CONFIG2 register\n"); + else + adc->current_boost_mode = mode; + + mutex_unlock(&adc->lock); + + return ret; +} + +static int mcp3564_get_current_boost_mode(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + struct mcp3564_state *adc = iio_priv(indio_dev); + + return adc->current_boost_mode; +} + +static const struct iio_enum mcp3564_current_boost_mode_enum = { + .items = mcp3564_boost_current_avail, + .num_items = ARRAY_SIZE(mcp3564_boost_current_avail), + .set = mcp3564_set_current_boost_mode, + .get = mcp3564_get_current_boost_mode, +}; + +static const struct iio_chan_spec_ext_info mcp3564_ext_info[] = { + IIO_ENUM("boost_current_gain", IIO_SHARED_BY_ALL, &mcp3564_current_boost_mode_enum), + { + .name = "boost_current_gain_available", + .shared = IIO_SHARED_BY_ALL, + .read = iio_enum_available_read, + .private = (uintptr_t)&mcp3564_current_boost_mode_enum, + }, + { } +}; + +static ssize_t mcp3564_auto_zeroing_mux_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct mcp3564_state *adc = iio_priv(indio_dev); + + return sysfs_emit(buf, "%d\n", adc->auto_zeroing_mux); +} + +static ssize_t mcp3564_auto_zeroing_mux_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct mcp3564_state *adc = iio_priv(indio_dev); + bool auto_zero; + int ret; + + ret = kstrtobool(buf, &auto_zero); + if (ret) + return ret; + + mutex_lock(&adc->lock); + ret = mcp3564_update_8bits(adc, MCP3564_CONFIG2_REG, MCP3564_CONFIG2_AZ_MUX_MASK, + FIELD_PREP(MCP3564_CONFIG2_AZ_MUX_MASK, auto_zero)); + + if (ret) + dev_err(&indio_dev->dev, "Failed to update CONFIG2 register\n"); + else + adc->auto_zeroing_mux = auto_zero; + + mutex_unlock(&adc->lock); + + return ret ? ret : len; +} + +static ssize_t mcp3564_auto_zeroing_ref_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct mcp3564_state *adc = iio_priv(indio_dev); + + return sysfs_emit(buf, "%d\n", adc->auto_zeroing_ref); +} + +static ssize_t mcp3564_auto_zeroing_ref_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct mcp3564_state *adc = iio_priv(indio_dev); + bool auto_zero; + int ret; + + ret = kstrtobool(buf, &auto_zero); + if (ret) + return ret; + + mutex_lock(&adc->lock); + ret = mcp3564_update_8bits(adc, MCP3564_CONFIG2_REG, MCP3564_CONFIG2_AZ_REF_MASK, + FIELD_PREP(MCP3564_CONFIG2_AZ_REF_MASK, auto_zero)); + + if (ret) + dev_err(&indio_dev->dev, "Failed to update CONFIG2 register\n"); + else + adc->auto_zeroing_ref = auto_zero; + + mutex_unlock(&adc->lock); + + return ret ? ret : len; +} + +static const struct iio_chan_spec mcp3564_channel_template = { + .type = IIO_VOLTAGE, + .indexed = 1, + .differential = 1, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_CALIBSCALE) | + BIT(IIO_CHAN_INFO_CALIBBIAS) | + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_CALIBSCALE) | + BIT(IIO_CHAN_INFO_CALIBBIAS) | + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .ext_info = mcp3564_ext_info, +}; + +static const struct iio_chan_spec mcp3564_temp_channel_template = { + .type = IIO_TEMP, + .channel = 0, + .address = ((MCP3564_TEMP_DIODE_P << 4) | MCP3564_TEMP_DIODE_M), + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_CALIBSCALE) | + BIT(IIO_CHAN_INFO_CALIBBIAS) | + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_CALIBSCALE) | + BIT(IIO_CHAN_INFO_CALIBBIAS) | + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), +}; + +static const struct iio_chan_spec mcp3564_burnout_channel_template = { + .type = IIO_CURRENT, + .output = true, + .channel = 0, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_separate_available = BIT(IIO_CHAN_INFO_RAW), +}; + +/* + * Number of channels could be calculated: + * num_channels = single_ended_input + differential_input + temperature + burnout + * Eg. for MCP3561 (only 2 channels available: CH0 and CH1) + * single_ended_input = (CH0 - GND), (CH1 - GND) = 2 + * differential_input = (CH0 - CH1), (CH0 - CH0) = 2 + * num_channels = 2 + 2 + 2 + * Generic formula is: + * num_channels = P^R(Number_of_single_ended_channels, 2) + 2 (temperature + burnout channels) + * P^R(Number_of_single_ended_channels, 2) is Permutations with Replacement of + * Number_of_single_ended_channels taken by 2 + */ +static const struct mcp3564_chip_info mcp3564_chip_infos_tbl[] = { + [mcp3461] = { + .name = "mcp3461", + .num_channels = 6, + .resolution = 16, + .have_vref = false, + }, + [mcp3462] = { + .name = "mcp3462", + .num_channels = 18, + .resolution = 16, + .have_vref = false, + }, + [mcp3464] = { + .name = "mcp3464", + .num_channels = 66, + .resolution = 16, + .have_vref = false, + }, + [mcp3561] = { + .name = "mcp3561", + .num_channels = 6, + .resolution = 24, + .have_vref = false, + }, + [mcp3562] = { + .name = "mcp3562", + .num_channels = 18, + .resolution = 24, + .have_vref = false, + }, + [mcp3564] = { + .name = "mcp3564", + .num_channels = 66, + .resolution = 24, + .have_vref = false, + }, + [mcp3461r] = { + .name = "mcp3461r", + .num_channels = 6, + .resolution = 16, + .have_vref = false, + }, + [mcp3462r] = { + .name = "mcp3462r", + .num_channels = 18, + .resolution = 16, + .have_vref = true, + }, + [mcp3464r] = { + .name = "mcp3464r", + .num_channels = 66, + .resolution = 16, + .have_vref = true, + }, + [mcp3561r] = { + .name = "mcp3561r", + .num_channels = 6, + .resolution = 24, + .have_vref = true, + }, + [mcp3562r] = { + .name = "mcp3562r", + .num_channels = 18, + .resolution = 24, + .have_vref = true, + }, + [mcp3564r] = { + .name = "mcp3564r", + .num_channels = 66, + .resolution = 24, + .have_vref = true, + }, +}; + +static int mcp3564_read_single_value(struct iio_dev *indio_dev, + struct iio_chan_spec const *channel, + int *val) +{ + struct mcp3564_state *adc = iio_priv(indio_dev); + int ret; + u8 tmp; + int ret_read = 0; + + ret = mcp3564_write_8bits(adc, MCP3564_MUX_REG, channel->address); + if (ret) + return ret; + + /* Start ADC Conversion using fast command (overwrites ADC_MODE[1:0] = 11) */ + ret = mcp3564_fast_cmd(adc, MCP3564_FASTCMD_START); + if (ret) + return ret; + + /* + * Check if the conversion is ready. If not, wait a little bit, and + * in case of timeout exit with an error. + */ + ret = read_poll_timeout(mcp3564_read_8bits, ret_read, + ret_read || !(tmp & MCP3564_DATA_READY_MASK), + 20000, MCP3564_DATA_READY_TIMEOUT_MS * 1000, true, + adc, MCP3564_IRQ_REG, &tmp); + + /* failed to read status register */ + if (ret_read) + return ret_read; + + if (ret) + return ret; + + if (tmp & MCP3564_DATA_READY_MASK) + /* failing to finish conversion */ + return -EBUSY; + + return mcp3564_read_32bits(adc, MCP3564_ADCDATA_REG, val); +} + +static int mcp3564_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *channel, + const int **vals, int *type, + int *length, long mask) +{ + struct mcp3564_state *adc = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (!channel->output) + return -EINVAL; + + *vals = mcp3564_burnout_avail[0]; + *length = ARRAY_SIZE(mcp3564_burnout_avail) * 2; + *type = IIO_VAL_INT_PLUS_MICRO; + return IIO_AVAIL_LIST; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + *vals = mcp3564_oversampling_avail; + *length = ARRAY_SIZE(mcp3564_oversampling_avail); + *type = IIO_VAL_INT; + return IIO_AVAIL_LIST; + case IIO_CHAN_INFO_SCALE: + *vals = (int *)adc->scale_tbls; + *length = ARRAY_SIZE(adc->scale_tbls) * 2; + *type = IIO_VAL_INT_PLUS_NANO; + return IIO_AVAIL_LIST; + case IIO_CHAN_INFO_CALIBBIAS: + *vals = mcp3564_calib_bias; + *type = IIO_VAL_INT; + return IIO_AVAIL_RANGE; + case IIO_CHAN_INFO_CALIBSCALE: + *vals = mcp3564_calib_scale; + *type = IIO_VAL_INT; + return IIO_AVAIL_RANGE; + default: + return -EINVAL; + } +} + +static int mcp3564_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *channel, + int *val, int *val2, long mask) +{ + struct mcp3564_state *adc = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (channel->output) { + mutex_lock(&adc->lock); + *val = mcp3564_burnout_avail[adc->burnout_mode][0]; + *val2 = mcp3564_burnout_avail[adc->burnout_mode][1]; + mutex_unlock(&adc->lock); + return IIO_VAL_INT_PLUS_MICRO; + } + + ret = mcp3564_read_single_value(indio_dev, channel, val); + if (ret) + return -EINVAL; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + mutex_lock(&adc->lock); + *val = adc->scale_tbls[adc->hwgain][0]; + *val2 = adc->scale_tbls[adc->hwgain][1]; + mutex_unlock(&adc->lock); + return IIO_VAL_INT_PLUS_NANO; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + *val = mcp3564_oversampling_avail[adc->oversampling]; + return IIO_VAL_INT; + case IIO_CHAN_INFO_CALIBBIAS: + *val = adc->calib_bias; + return IIO_VAL_INT; + case IIO_CHAN_INFO_CALIBSCALE: + *val = adc->calib_scale; + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static int mcp3564_write_raw_get_fmt(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + long info) +{ + switch (info) { + case IIO_CHAN_INFO_RAW: + return IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_CALIBBIAS: + case IIO_CHAN_INFO_CALIBSCALE: + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + return IIO_VAL_INT_PLUS_NANO; + default: + return -EINVAL; + } +} + +static int mcp3564_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *channel, int val, + int val2, long mask) +{ + struct mcp3564_state *adc = iio_priv(indio_dev); + int tmp; + unsigned int hwgain; + enum mcp3564_burnout burnout; + int ret = 0; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (!channel->output) + return -EINVAL; + + for (burnout = 0; burnout < MCP3564_MAX_BURNOUT_IDX; burnout++) + if (val == mcp3564_burnout_avail[burnout][0] && + val2 == mcp3564_burnout_avail[burnout][1]) + break; + + if (burnout == MCP3564_MAX_BURNOUT_IDX) + return -EINVAL; + + if (burnout == adc->burnout_mode) + return ret; + + mutex_lock(&adc->lock); + ret = mcp3564_update_8bits(adc, MCP3564_CONFIG0_REG, + MCP3564_CONFIG0_CS_SEL_MASK, + FIELD_PREP(MCP3564_CONFIG0_CS_SEL_MASK, burnout)); + + if (ret) + dev_err(&indio_dev->dev, "Failed to configure burnout current\n"); + else + adc->burnout_mode = burnout; + mutex_unlock(&adc->lock); + return ret; + case IIO_CHAN_INFO_CALIBBIAS: + if (val < mcp3564_calib_bias[0] && val > mcp3564_calib_bias[2]) + return -EINVAL; + + mutex_lock(&adc->lock); + ret = mcp3564_write_24bits(adc, MCP3564_OFFSETCAL_REG, val); + if (!ret) + adc->calib_bias = val; + mutex_unlock(&adc->lock); + return ret; + case IIO_CHAN_INFO_CALIBSCALE: + if (val < mcp3564_calib_scale[0] && val > mcp3564_calib_scale[2]) + return -EINVAL; + + if (adc->calib_scale == val) + return ret; + + mutex_lock(&adc->lock); + ret = mcp3564_write_24bits(adc, MCP3564_GAINCAL_REG, val); + if (!ret) + adc->calib_scale = val; + mutex_unlock(&adc->lock); + return ret; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + if (val < 0) + return -EINVAL; + + tmp = find_closest(val, mcp3564_oversampling_avail, + ARRAY_SIZE(mcp3564_oversampling_avail)); + + if (adc->oversampling == tmp) + return ret; + + mutex_lock(&adc->lock); + ret = mcp3564_update_8bits(adc, MCP3564_CONFIG1_REG, + MCP3564_CONFIG1_OVERSPL_RATIO_MASK, + FIELD_PREP(MCP3564_CONFIG1_OVERSPL_RATIO_MASK, + adc->oversampling)); + if (!ret) + adc->oversampling = tmp; + mutex_unlock(&adc->lock); + return ret; + case IIO_CHAN_INFO_SCALE: + for (hwgain = 0; hwgain < MCP3564_MAX_PGA; hwgain++) + if (val == adc->scale_tbls[hwgain][0] && + val2 == adc->scale_tbls[hwgain][1]) + break; + + if (hwgain == MCP3564_MAX_PGA) + return -EINVAL; + + if (hwgain == adc->hwgain) + return ret; + + mutex_lock(&adc->lock); + ret = mcp3564_update_8bits(adc, MCP3564_CONFIG2_REG, + MCP3564_CONFIG2_HARDWARE_GAIN_MASK, + FIELD_PREP(MCP3564_CONFIG2_HARDWARE_GAIN_MASK, hwgain)); + if (!ret) + adc->hwgain = hwgain; + + mutex_unlock(&adc->lock); + return ret; + default: + return -EINVAL; + } +} + +static int mcp3564_read_label(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, char *label) +{ + struct mcp3564_state *adc = iio_priv(indio_dev); + + return sprintf(label, "%s\n", adc->labels[chan->scan_index]); +} + +static int mcp3564_parse_fw_children(struct iio_dev *indio_dev) +{ + struct mcp3564_state *adc = iio_priv(indio_dev); + struct device *dev = &adc->spi->dev; + struct iio_chan_spec *channels; + struct fwnode_handle *child; + struct iio_chan_spec chanspec = mcp3564_channel_template; + struct iio_chan_spec temp_chanspec = mcp3564_temp_channel_template; + struct iio_chan_spec burnout_chanspec = mcp3564_burnout_channel_template; + int chan_idx = 0; + unsigned int num_ch; + u32 inputs[2]; + const char *node_name; + const char *label; + int ret; + + num_ch = device_get_child_node_count(dev); + if (num_ch == 0) + return dev_err_probe(&indio_dev->dev, -ENODEV, + "FW has no channels defined\n"); + + /* Reserve space for burnout and temperature channel */ + num_ch += 2; + + if (num_ch > adc->chip_info->num_channels) + return dev_err_probe(dev, -EINVAL, "Too many channels %d > %d\n", + num_ch, adc->chip_info->num_channels); + + channels = devm_kcalloc(dev, num_ch, sizeof(*channels), GFP_KERNEL); + if (!channels) + return dev_err_probe(dev, -ENOMEM, "Can't allocate memory\n"); + + device_for_each_child_node(dev, child) { + node_name = fwnode_get_name(child); + + if (fwnode_property_present(child, "diff-channels")) { + ret = fwnode_property_read_u32_array(child, + "diff-channels", + inputs, + ARRAY_SIZE(inputs)); + chanspec.differential = 1; + } else { + ret = fwnode_property_read_u32(child, "reg", &inputs[0]); + + chanspec.differential = 0; + inputs[1] = MCP3564_AGND; + } + if (ret) { + fwnode_handle_put(child); + return ret; + } + + if (inputs[0] > MCP3564_INTERNAL_VCM || + inputs[1] > MCP3564_INTERNAL_VCM) { + fwnode_handle_put(child); + return dev_err_probe(&indio_dev->dev, -EINVAL, + "Channel index > %d, for %s\n", + MCP3564_INTERNAL_VCM + 1, + node_name); + } + + chanspec.address = (inputs[0] << 4) | inputs[1]; + chanspec.channel = inputs[0]; + chanspec.channel2 = inputs[1]; + chanspec.scan_index = chan_idx; + + if (fwnode_property_present(child, "label")) { + fwnode_property_read_string(child, "label", &label); + adc->labels[chan_idx] = label; + } + + channels[chan_idx] = chanspec; + chan_idx++; + } + + /* Add burnout current channel */ + burnout_chanspec.scan_index = chan_idx; + channels[chan_idx] = burnout_chanspec; + adc->labels[chan_idx] = mcp3564_channel_labels[0]; + chanspec.scan_index = chan_idx; + chan_idx++; + + /* Add temperature channel */ + temp_chanspec.scan_index = chan_idx; + channels[chan_idx] = temp_chanspec; + adc->labels[chan_idx] = mcp3564_channel_labels[1]; + chan_idx++; + + indio_dev->num_channels = chan_idx; + indio_dev->channels = channels; + + return 0; +} + +static void mcp3564_disable_reg(void *reg) +{ + regulator_disable(reg); +} + +static void mcp3564_fill_scale_tbls(struct mcp3564_state *adc) +{ + unsigned int pow = adc->chip_info->resolution - 1; + int ref; + unsigned int i; + int tmp0; + u64 tmp1; + + for (i = 0; i < MCP3564_MAX_PGA; i++) { + ref = adc->vref_mv; + tmp1 = ((u64)ref * NANO) >> pow; + div_u64_rem(tmp1, NANO, &tmp0); + + tmp1 = tmp1 * mcp3564_hwgain_frac[(2 * i) + 1]; + tmp0 = (int)div_u64(tmp1, mcp3564_hwgain_frac[2 * i]); + + adc->scale_tbls[i][1] = tmp0; + } +} + +static int mcp3564_config(struct iio_dev *indio_dev) +{ + struct mcp3564_state *adc = iio_priv(indio_dev); + struct device *dev = &adc->spi->dev; + const struct spi_device_id *dev_id; + u8 tmp_reg; + u16 tmp_u16; + enum mcp3564_ids ids; + int ret = 0; + unsigned int tmp = 0x01; + bool err = true; + + /* + * The address is set on a per-device basis by fuses in the factory, + * configured on request. If not requested, the fuses are set for 0x1. + * The device address is part of the device markings to avoid + * potential confusion. This address is coded on two bits, so four possible + * addresses are available when multiple devices are present on the same + * SPI bus with only one Chip Select line for all devices. + */ + device_property_read_u32(dev, "microchip,hw-device-address", &tmp); + + if (tmp > 3) { + dev_err_probe(dev, tmp, + "invalid device address. Must be in range 0-3.\n"); + return -EINVAL; + } + + adc->dev_addr = FIELD_GET(MCP3564_HW_ADDR_MASK, tmp); + + dev_dbg(dev, "use HW device address %i\n", adc->dev_addr); + + ret = mcp3564_read_8bits(adc, MCP3564_RESERVED_C_REG, &tmp_reg); + if (ret < 0) + return ret; + + switch (tmp_reg) { + case MCP3564_C_REG_DEFAULT: + adc->have_vref = false; + break; + case MCP3564R_C_REG_DEFAULT: + adc->have_vref = true; + break; + default: + dev_info(dev, "Unknown chip found: %d\n", tmp_reg); + err = true; + } + + if (!err) { + ret = mcp3564_read_16bits(adc, MCP3564_RESERVED_E_REG, &tmp_u16); + if (ret < 0) + return ret; + + switch (tmp_u16 & MCP3564_HW_ID_MASK) { + case MCP3461_HW_ID: + if (adc->have_vref) + ids = mcp3461r; + else + ids = mcp3461; + break; + case MCP3462_HW_ID: + if (adc->have_vref) + ids = mcp3462r; + else + ids = mcp3462; + break; + case MCP3464_HW_ID: + if (adc->have_vref) + ids = mcp3464r; + else + ids = mcp3464; + break; + case MCP3561_HW_ID: + if (adc->have_vref) + ids = mcp3561r; + else + ids = mcp3561; + break; + case MCP3562_HW_ID: + if (adc->have_vref) + ids = mcp3562r; + else + ids = mcp3562; + break; + case MCP3564_HW_ID: + if (adc->have_vref) + ids = mcp3564r; + else + ids = mcp3564; + break; + default: + dev_info(dev, "Unknown chip found: %d\n", tmp_u16); + err = true; + } + } + + if (err) { + /* + * If failed to identify the hardware based on internal registers, + * try using fallback compatible in device tree to deal with some newer part number. + */ + adc->chip_info = spi_get_device_match_data(adc->spi); + if (!adc->chip_info) { + dev_id = spi_get_device_id(adc->spi); + adc->chip_info = (const struct mcp3564_chip_info *)dev_id->driver_data; + } + + adc->have_vref = adc->chip_info->have_vref; + } else { + adc->chip_info = &mcp3564_chip_infos_tbl[ids]; + } + + dev_dbg(dev, "Found %s chip\n", adc->chip_info->name); + + adc->vref = devm_regulator_get_optional(dev, "vref"); + if (IS_ERR(adc->vref)) { + if (PTR_ERR(adc->vref) != -ENODEV) + return dev_err_probe(dev, PTR_ERR(adc->vref), + "failed to get regulator\n"); + + /* Check if chip has internal vref */ + if (!adc->have_vref) + return dev_err_probe(dev, PTR_ERR(adc->vref), + "Unknown Vref\n"); + adc->vref = NULL; + dev_dbg(dev, "%s: Using internal Vref\n", __func__); + } else { + ret = regulator_enable(adc->vref); + if (ret) + return ret; + + ret = devm_add_action_or_reset(dev, mcp3564_disable_reg, + adc->vref); + if (ret) + return ret; + + dev_dbg(dev, "%s: Using External Vref\n", __func__); + + ret = regulator_get_voltage(adc->vref); + if (ret < 0) + return dev_err_probe(dev, ret, + "Failed to read vref regulator\n"); + + adc->vref_mv = ret / MILLI; + } + + ret = mcp3564_parse_fw_children(indio_dev); + if (ret) + return ret; + + /* + * Command sequence that ensures a recovery with the desired settings + * in any cases of loss-of-power scenario (Full Chip Reset): + * - Write LOCK register to 0xA5 + * - Write IRQ register to 0x03 + * - Send "Device Full Reset" fast command + * - Wait 1ms for "Full Reset" to complete + */ + ret = mcp3564_write_8bits(adc, MCP3564_LOCK_REG, MCP3564_LOCK_WRITE_ACCESS_PASSWORD); + if (ret) + return ret; + + ret = mcp3564_write_8bits(adc, MCP3564_IRQ_REG, 0x03); + if (ret) + return ret; + + ret = mcp3564_fast_cmd(adc, MCP3564_FASTCMD_RESET); + if (ret) + return ret; + + /* + * After Full reset wait some time to be able to fully reset the part and place + * it back in a default configuration. + * From datasheet: POR (Power On Reset Time) is ~1us + * 1ms should be enough. + */ + mdelay(1); + + /* set a gain of 1x for GAINCAL */ + ret = mcp3564_write_24bits(adc, MCP3564_GAINCAL_REG, MCP3564_DEFAULT_GAINCAL); + if (ret) + return ret; + + adc->calib_scale = MCP3564_DEFAULT_GAINCAL; + + ret = mcp3564_write_24bits(adc, MCP3564_OFFSETCAL_REG, MCP3564_DEFAULT_OFFSETCAL); + if (ret) + return ret; + + ret = mcp3564_write_24bits(adc, MCP3564_TIMER_REG, MCP3564_TIMER_DEFAULT_VALUE); + if (ret) + return ret; + + ret = mcp3564_write_24bits(adc, MCP3564_SCAN_REG, + MCP3564_SCAN_DELAY_TIME_SET(MCP3564_NO_DELAY) | + MCP3564_SCAN_CH_SEL_SET(MCP3564_SCAN_DEFAULT_VALUE)); + if (ret) + return ret; + + ret = mcp3564_write_8bits(adc, MCP3564_MUX_REG, MCP3564_MUX_SET(MCP3564_CH0, MCP3564_CH1)); + if (ret) + return ret; + + ret = mcp3564_write_8bits(adc, MCP3564_IRQ_REG, + FIELD_PREP(MCP3464_EN_FASTCMD_MASK, 1) | + FIELD_PREP(MCP3464_EN_STP_MASK, 1)); + if (ret) + return ret; + + tmp_reg = FIELD_PREP(MCP3464_CONFIG3_CONV_MODE_MASK, + MCP3464_CONFIG3_CONV_MODE_ONE_SHOT_STANDBY); + tmp_reg |= FIELD_PREP(MCP3464_CONFIG3_DATA_FORMAT_MASK, + MCP3464_CONFIG3_DATA_FMT_32B_SGN_EXT); + tmp_reg |= MCP3464_CONFIG3_EN_OFFCAL_MASK; + tmp_reg |= MCP3464_CONFIG3_EN_GAINCAL_MASK; + + ret = mcp3564_write_8bits(adc, MCP3564_CONFIG3_REG, tmp_reg); + if (ret) + return ret; + + tmp_reg = FIELD_PREP(MCP3564_CONFIG2_BOOST_CURRENT_MASK, MCP3564_BOOST_CURRENT_x1_00); + tmp_reg |= FIELD_PREP(MCP3564_CONFIG2_HARDWARE_GAIN_MASK, 0x01); + tmp_reg |= FIELD_PREP(MCP3564_CONFIG2_AZ_MUX_MASK, 1); + + ret = mcp3564_write_8bits(adc, MCP3564_CONFIG2_REG, tmp_reg); + if (ret) + return ret; + + adc->hwgain = 0x01; + adc->auto_zeroing_mux = true; + adc->auto_zeroing_ref = false; + adc->current_boost_mode = MCP3564_BOOST_CURRENT_x1_00; + + tmp_reg = FIELD_PREP(MCP3564_CONFIG1_OVERSPL_RATIO_MASK, MCP3564_OVERSAMPLING_RATIO_98304); + + ret = mcp3564_write_8bits(adc, MCP3564_CONFIG1_REG, tmp_reg); + if (ret) + return ret; + + adc->oversampling = MCP3564_OVERSAMPLING_RATIO_98304; + + tmp_reg = FIELD_PREP(MCP3564_CONFIG0_ADC_MODE_MASK, MCP3564_ADC_MODE_STANDBY); + tmp_reg |= FIELD_PREP(MCP3564_CONFIG0_CS_SEL_MASK, MCP3564_CONFIG0_CS_SEL_0_0_uA); + tmp_reg |= FIELD_PREP(MCP3564_CONFIG0_CLK_SEL_MASK, MCP3564_CONFIG0_USE_INT_CLK); + tmp_reg |= MCP3456_CONFIG0_BIT6_DEFAULT; + + if (!adc->vref) { + tmp_reg |= FIELD_PREP(MCP3456_CONFIG0_VREF_MASK, 1); + adc->vref_mv = MCP3564R_INT_VREF_MV; + } + + ret = mcp3564_write_8bits(adc, MCP3564_CONFIG0_REG, tmp_reg); + + adc->burnout_mode = MCP3564_CONFIG0_CS_SEL_0_0_uA; + + return ret; +} + +static IIO_DEVICE_ATTR(auto_zeroing_ref_enable, 0644, + mcp3564_auto_zeroing_ref_show, + mcp3564_auto_zeroing_ref_store, 0); + +static IIO_DEVICE_ATTR(auto_zeroing_mux_enable, 0644, + mcp3564_auto_zeroing_mux_show, + mcp3564_auto_zeroing_mux_store, 0); + +static struct attribute *mcp3564_attributes[] = { + &iio_dev_attr_auto_zeroing_mux_enable.dev_attr.attr, + NULL +}; + +static struct attribute *mcp3564r_attributes[] = { + &iio_dev_attr_auto_zeroing_mux_enable.dev_attr.attr, + &iio_dev_attr_auto_zeroing_ref_enable.dev_attr.attr, + NULL +}; + +static struct attribute_group mcp3564_attribute_group = { + .attrs = mcp3564_attributes, +}; + +static struct attribute_group mcp3564r_attribute_group = { + .attrs = mcp3564r_attributes, +}; + +static const struct iio_info mcp3564_info = { + .read_raw = mcp3564_read_raw, + .read_avail = mcp3564_read_avail, + .write_raw = mcp3564_write_raw, + .write_raw_get_fmt = mcp3564_write_raw_get_fmt, + .read_label = mcp3564_read_label, + .attrs = &mcp3564_attribute_group, +}; + +static const struct iio_info mcp3564r_info = { + .read_raw = mcp3564_read_raw, + .read_avail = mcp3564_read_avail, + .write_raw = mcp3564_write_raw, + .write_raw_get_fmt = mcp3564_write_raw_get_fmt, + .read_label = mcp3564_read_label, + .attrs = &mcp3564r_attribute_group, +}; + +static int mcp3564_probe(struct spi_device *spi) +{ + int ret; + struct iio_dev *indio_dev; + struct mcp3564_state *adc; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc)); + if (!indio_dev) + return -ENOMEM; + + adc = iio_priv(indio_dev); + adc->spi = spi; + + dev_dbg(&spi->dev, "%s: probe(spi = 0x%p)\n", __func__, spi); + + /* + * Do any chip specific initialization, e.g: + * read/write some registers + * enable/disable certain channels + * change the sampling rate to the requested value + */ + ret = mcp3564_config(indio_dev); + if (ret) + return dev_err_probe(&spi->dev, ret, + "Can't configure MCP356X device\n"); + + dev_dbg(&spi->dev, "%s: Vref (mV): %d\n", __func__, adc->vref_mv); + + mcp3564_fill_scale_tbls(adc); + + indio_dev->name = adc->chip_info->name; + indio_dev->modes = INDIO_DIRECT_MODE; + + if (!adc->vref) + indio_dev->info = &mcp3564r_info; + else + indio_dev->info = &mcp3564_info; + + mutex_init(&adc->lock); + + ret = devm_iio_device_register(&spi->dev, indio_dev); + if (ret) + return dev_err_probe(&spi->dev, ret, + "Can't register IIO device\n"); + + return 0; +} + +static const struct of_device_id mcp3564_dt_ids[] = { + { .compatible = "microchip,mcp3461", .data = &mcp3564_chip_infos_tbl[mcp3461] }, + { .compatible = "microchip,mcp3462", .data = &mcp3564_chip_infos_tbl[mcp3462] }, + { .compatible = "microchip,mcp3464", .data = &mcp3564_chip_infos_tbl[mcp3464] }, + { .compatible = "microchip,mcp3561", .data = &mcp3564_chip_infos_tbl[mcp3561] }, + { .compatible = "microchip,mcp3562", .data = &mcp3564_chip_infos_tbl[mcp3562] }, + { .compatible = "microchip,mcp3564", .data = &mcp3564_chip_infos_tbl[mcp3564] }, + { .compatible = "microchip,mcp3461r", .data = &mcp3564_chip_infos_tbl[mcp3461r] }, + { .compatible = "microchip,mcp3462r", .data = &mcp3564_chip_infos_tbl[mcp3462r] }, + { .compatible = "microchip,mcp3464r", .data = &mcp3564_chip_infos_tbl[mcp3464r] }, + { .compatible = "microchip,mcp3561r", .data = &mcp3564_chip_infos_tbl[mcp3561r] }, + { .compatible = "microchip,mcp3562r", .data = &mcp3564_chip_infos_tbl[mcp3562r] }, + { .compatible = "microchip,mcp3564r", .data = &mcp3564_chip_infos_tbl[mcp3564r] }, + { } +}; +MODULE_DEVICE_TABLE(of, mcp3564_dt_ids); + +static const struct spi_device_id mcp3564_id[] = { + { "mcp3461", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3461] }, + { "mcp3462", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3462] }, + { "mcp3464", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3464] }, + { "mcp3561", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3561] }, + { "mcp3562", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3562] }, + { "mcp3564", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3564] }, + { "mcp3461r", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3461r] }, + { "mcp3462r", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3462r] }, + { "mcp3464r", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3464r] }, + { "mcp3561r", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3561r] }, + { "mcp3562r", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3562r] }, + { "mcp3564r", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3564r] }, + { } +}; +MODULE_DEVICE_TABLE(spi, mcp3564_id); + +static struct spi_driver mcp3564_driver = { + .driver = { + .name = "mcp3564", + .of_match_table = mcp3564_dt_ids, + }, + .probe = mcp3564_probe, + .id_table = mcp3564_id, +}; + +module_spi_driver(mcp3564_driver); + +MODULE_AUTHOR("Marius Cristea <marius.cristea@microchip.com>"); +MODULE_DESCRIPTION("Microchip MCP346x/MCP346xR and MCP356x/MCP346xR ADCs"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/mcp3911.c b/drivers/iio/adc/mcp3911.c index 974c5bd923a6..d864558bc087 100644 --- a/drivers/iio/adc/mcp3911.c +++ b/drivers/iio/adc/mcp3911.c @@ -29,11 +29,11 @@ #define MCP3911_REG_MOD 0x06 #define MCP3911_REG_PHASE 0x07 #define MCP3911_REG_GAIN 0x09 -#define MCP3911_GAIN_MASK(ch) (GENMASK(2, 0) << 3 * ch) -#define MCP3911_GAIN_VAL(ch, val) ((val << 3 * ch) & MCP3911_GAIN_MASK(ch)) +#define MCP3911_GAIN_MASK(ch) (GENMASK(2, 0) << 3 * (ch)) +#define MCP3911_GAIN_VAL(ch, val) ((val << 3 * (ch)) & MCP3911_GAIN_MASK(ch)) #define MCP3911_REG_STATUSCOM 0x0a -#define MCP3911_STATUSCOM_DRHIZ BIT(12) +#define MCP3911_STATUSCOM_DRHIZ BIT(12) #define MCP3911_STATUSCOM_READ GENMASK(7, 6) #define MCP3911_STATUSCOM_CH1_24WIDTH BIT(4) #define MCP3911_STATUSCOM_CH0_24WIDTH BIT(3) @@ -51,8 +51,8 @@ #define MCP3911_REG_GAINCAL_CH1 0x17 #define MCP3911_REG_VREFCAL 0x1a -#define MCP3911_CHANNEL(x) (MCP3911_REG_CHANNEL0 + x * 3) -#define MCP3911_OFFCAL(x) (MCP3911_REG_OFFCAL_CH0 + x * 6) +#define MCP3911_CHANNEL(ch) (MCP3911_REG_CHANNEL0 + (ch) * 3) +#define MCP3911_OFFCAL(ch) (MCP3911_REG_OFFCAL_CH0 + (ch) * 6) /* Internal voltage reference in mV */ #define MCP3911_INT_VREF_MV 1200 @@ -61,12 +61,56 @@ #define MCP3911_REG_WRITE(reg, id) ((((reg) << 1) | ((id) << 6) | (0 << 0)) & 0xff) #define MCP3911_REG_MASK GENMASK(4, 1) -#define MCP3911_NUM_CHANNELS 2 #define MCP3911_NUM_SCALES 6 +/* Registers compatible with MCP3910 */ +#define MCP3910_REG_STATUSCOM 0x0c +#define MCP3910_STATUSCOM_READ GENMASK(23, 22) +#define MCP3910_STATUSCOM_DRHIZ BIT(20) + +#define MCP3910_REG_GAIN 0x0b + +#define MCP3910_REG_CONFIG0 0x0d +#define MCP3910_CONFIG0_EN_OFFCAL BIT(23) +#define MCP3910_CONFIG0_OSR GENMASK(15, 13) + +#define MCP3910_REG_CONFIG1 0x0e +#define MCP3910_CONFIG1_CLKEXT BIT(6) +#define MCP3910_CONFIG1_VREFEXT BIT(7) + +#define MCP3910_REG_OFFCAL_CH0 0x0f +#define MCP3910_OFFCAL(ch) (MCP3910_REG_OFFCAL_CH0 + (ch) * 6) + +/* Maximal number of channels used by the MCP39XX family */ +#define MCP39XX_MAX_NUM_CHANNELS 8 + static const int mcp3911_osr_table[] = { 32, 64, 128, 256, 512, 1024, 2048, 4096 }; static u32 mcp3911_scale_table[MCP3911_NUM_SCALES][2]; +enum mcp3911_id { + MCP3910, + MCP3911, + MCP3912, + MCP3913, + MCP3914, + MCP3918, + MCP3919, +}; + +struct mcp3911; +struct mcp3911_chip_info { + const struct iio_chan_spec *channels; + unsigned int num_channels; + + int (*config)(struct mcp3911 *adc); + int (*get_osr)(struct mcp3911 *adc, u32 *val); + int (*set_osr)(struct mcp3911 *adc, u32 val); + int (*enable_offset)(struct mcp3911 *adc, bool enable); + int (*get_offset)(struct mcp3911 *adc, int channel, int *val); + int (*set_offset)(struct mcp3911 *adc, int channel, int val); + int (*set_scale)(struct mcp3911 *adc, int channel, u32 val); +}; + struct mcp3911 { struct spi_device *spi; struct mutex lock; @@ -74,14 +118,15 @@ struct mcp3911 { struct clk *clki; u32 dev_addr; struct iio_trigger *trig; - u32 gain[MCP3911_NUM_CHANNELS]; + u32 gain[MCP39XX_MAX_NUM_CHANNELS]; + const struct mcp3911_chip_info *chip; struct { - u32 channels[MCP3911_NUM_CHANNELS]; + u32 channels[MCP39XX_MAX_NUM_CHANNELS]; s64 ts __aligned(8); } scan; u8 tx_buf __aligned(IIO_DMA_MINALIGN); - u8 rx_buf[MCP3911_NUM_CHANNELS * 3]; + u8 rx_buf[MCP39XX_MAX_NUM_CHANNELS * 3]; }; static int mcp3911_read(struct mcp3911 *adc, u8 reg, u32 *val, u8 len) @@ -111,8 +156,7 @@ static int mcp3911_write(struct mcp3911 *adc, u8 reg, u32 val, u8 len) return spi_write(adc->spi, &val, len + 1); } -static int mcp3911_update(struct mcp3911 *adc, u8 reg, u32 mask, - u32 val, u8 len) +static int mcp3911_update(struct mcp3911 *adc, u8 reg, u32 mask, u32 val, u8 len) { u32 tmp; int ret; @@ -126,9 +170,115 @@ static int mcp3911_update(struct mcp3911 *adc, u8 reg, u32 mask, return mcp3911_write(adc, reg, val, len); } +static int mcp3910_enable_offset(struct mcp3911 *adc, bool enable) +{ + unsigned int mask = MCP3910_CONFIG0_EN_OFFCAL; + unsigned int value = enable ? mask : 0; + + return mcp3911_update(adc, MCP3910_REG_CONFIG0, mask, value, 3); +} + +static int mcp3910_get_offset(struct mcp3911 *adc, int channel, int *val) +{ + return mcp3911_read(adc, MCP3910_OFFCAL(channel), val, 3); +} + +static int mcp3910_set_offset(struct mcp3911 *adc, int channel, int val) +{ + int ret; + + ret = mcp3911_write(adc, MCP3910_OFFCAL(channel), val, 3); + if (ret) + return ret; + + return adc->chip->enable_offset(adc, 1); +} + +static int mcp3911_enable_offset(struct mcp3911 *adc, bool enable) +{ + unsigned int mask = MCP3911_STATUSCOM_EN_OFFCAL; + unsigned int value = enable ? mask : 0; + + return mcp3911_update(adc, MCP3911_REG_STATUSCOM, mask, value, 2); +} + +static int mcp3911_get_offset(struct mcp3911 *adc, int channel, int *val) +{ + return mcp3911_read(adc, MCP3911_OFFCAL(channel), val, 3); +} + +static int mcp3911_set_offset(struct mcp3911 *adc, int channel, int val) +{ + int ret; + + ret = mcp3911_write(adc, MCP3911_OFFCAL(channel), val, 3); + if (ret) + return ret; + + return adc->chip->enable_offset(adc, 1); +} + +static int mcp3910_get_osr(struct mcp3911 *adc, u32 *val) +{ + int ret; + unsigned int osr; + + ret = mcp3911_read(adc, MCP3910_REG_CONFIG0, val, 3); + if (ret) + return ret; + + osr = FIELD_GET(MCP3910_CONFIG0_OSR, *val); + *val = 32 << osr; + return 0; +} + +static int mcp3910_set_osr(struct mcp3911 *adc, u32 val) +{ + unsigned int osr = FIELD_PREP(MCP3910_CONFIG0_OSR, val); + unsigned int mask = MCP3910_CONFIG0_OSR; + + return mcp3911_update(adc, MCP3910_REG_CONFIG0, mask, osr, 3); +} + +static int mcp3911_set_osr(struct mcp3911 *adc, u32 val) +{ + unsigned int osr = FIELD_PREP(MCP3911_CONFIG_OSR, val); + unsigned int mask = MCP3911_CONFIG_OSR; + + return mcp3911_update(adc, MCP3911_REG_CONFIG, mask, osr, 2); +} + +static int mcp3911_get_osr(struct mcp3911 *adc, u32 *val) +{ + int ret; + unsigned int osr; + + ret = mcp3911_read(adc, MCP3911_REG_CONFIG, val, 2); + if (ret) + return ret; + + osr = FIELD_GET(MCP3911_CONFIG_OSR, *val); + *val = 32 << osr; + return ret; +} + +static int mcp3910_set_scale(struct mcp3911 *adc, int channel, u32 val) +{ + return mcp3911_update(adc, MCP3910_REG_GAIN, + MCP3911_GAIN_MASK(channel), + MCP3911_GAIN_VAL(channel, val), 3); +} + +static int mcp3911_set_scale(struct mcp3911 *adc, int channel, u32 val) +{ + return mcp3911_update(adc, MCP3911_REG_GAIN, + MCP3911_GAIN_MASK(channel), + MCP3911_GAIN_VAL(channel, val), 1); +} + static int mcp3911_write_raw_get_fmt(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - long mask) + struct iio_chan_spec const *chan, + long mask) { switch (mask) { case IIO_CHAN_INFO_SCALE: @@ -141,9 +291,9 @@ static int mcp3911_write_raw_get_fmt(struct iio_dev *indio_dev, } static int mcp3911_read_avail(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - const int **vals, int *type, int *length, - long info) + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long info) { switch (info) { case IIO_CHAN_INFO_OVERSAMPLING_RATIO: @@ -182,20 +332,18 @@ static int mcp3911_read_raw(struct iio_dev *indio_dev, break; case IIO_CHAN_INFO_OFFSET: - ret = mcp3911_read(adc, - MCP3911_OFFCAL(channel->channel), val, 3); + + ret = adc->chip->get_offset(adc, channel->channel, val); if (ret) goto out; ret = IIO_VAL_INT; break; case IIO_CHAN_INFO_OVERSAMPLING_RATIO: - ret = mcp3911_read(adc, MCP3911_REG_CONFIG, val, 2); + ret = adc->chip->get_osr(adc, val); if (ret) goto out; - *val = FIELD_GET(MCP3911_CONFIG_OSR, *val); - *val = 32 << *val; ret = IIO_VAL_INT; break; @@ -212,8 +360,8 @@ out: } static int mcp3911_write_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *channel, int val, - int val2, long mask) + struct iio_chan_spec const *channel, int val, + int val2, long mask) { struct mcp3911 *adc = iio_priv(indio_dev); int ret = -EINVAL; @@ -223,12 +371,10 @@ static int mcp3911_write_raw(struct iio_dev *indio_dev, case IIO_CHAN_INFO_SCALE: for (int i = 0; i < MCP3911_NUM_SCALES; i++) { if (val == mcp3911_scale_table[i][0] && - val2 == mcp3911_scale_table[i][1]) { + val2 == mcp3911_scale_table[i][1]) { adc->gain[channel->channel] = BIT(i); - ret = mcp3911_update(adc, MCP3911_REG_GAIN, - MCP3911_GAIN_MASK(channel->channel), - MCP3911_GAIN_VAL(channel->channel, i), 1); + ret = adc->chip->set_scale(adc, channel->channel, i); } } break; @@ -238,24 +384,13 @@ static int mcp3911_write_raw(struct iio_dev *indio_dev, goto out; } - /* Write offset */ - ret = mcp3911_write(adc, MCP3911_OFFCAL(channel->channel), val, - 3); - if (ret) - goto out; - - /* Enable offset*/ - ret = mcp3911_update(adc, MCP3911_REG_STATUSCOM, - MCP3911_STATUSCOM_EN_OFFCAL, - MCP3911_STATUSCOM_EN_OFFCAL, 2); + ret = adc->chip->set_offset(adc, channel->channel, val); break; case IIO_CHAN_INFO_OVERSAMPLING_RATIO: for (int i = 0; i < ARRAY_SIZE(mcp3911_osr_table); i++) { if (val == mcp3911_osr_table[i]) { - val = FIELD_PREP(MCP3911_CONFIG_OSR, i); - ret = mcp3911_update(adc, MCP3911_REG_CONFIG, MCP3911_CONFIG_OSR, - val, 2); + ret = adc->chip->set_osr(adc, i); break; } } @@ -269,6 +404,7 @@ out: static int mcp3911_calc_scale_table(struct mcp3911 *adc) { + struct device *dev = &adc->spi->dev; u32 ref = MCP3911_INT_VREF_MV; u32 div; int ret; @@ -277,10 +413,7 @@ static int mcp3911_calc_scale_table(struct mcp3911 *adc) if (adc->vref) { ret = regulator_get_voltage(adc->vref); if (ret < 0) { - dev_err(&adc->spi->dev, - "failed to get vref voltage: %d\n", - ret); - return ret; + return dev_err_probe(dev, ret, "failed to get vref voltage\n"); } ref = ret / 1000; @@ -326,24 +459,73 @@ static int mcp3911_calc_scale_table(struct mcp3911 *adc) }, \ } +static const struct iio_chan_spec mcp3910_channels[] = { + MCP3911_CHAN(0), + MCP3911_CHAN(1), + IIO_CHAN_SOFT_TIMESTAMP(2), +}; + static const struct iio_chan_spec mcp3911_channels[] = { MCP3911_CHAN(0), MCP3911_CHAN(1), IIO_CHAN_SOFT_TIMESTAMP(2), }; +static const struct iio_chan_spec mcp3912_channels[] = { + MCP3911_CHAN(0), + MCP3911_CHAN(1), + MCP3911_CHAN(2), + MCP3911_CHAN(3), + IIO_CHAN_SOFT_TIMESTAMP(4), +}; + +static const struct iio_chan_spec mcp3913_channels[] = { + MCP3911_CHAN(0), + MCP3911_CHAN(1), + MCP3911_CHAN(2), + MCP3911_CHAN(3), + MCP3911_CHAN(4), + MCP3911_CHAN(5), + IIO_CHAN_SOFT_TIMESTAMP(6), +}; + +static const struct iio_chan_spec mcp3914_channels[] = { + MCP3911_CHAN(0), + MCP3911_CHAN(1), + MCP3911_CHAN(2), + MCP3911_CHAN(3), + MCP3911_CHAN(4), + MCP3911_CHAN(5), + MCP3911_CHAN(6), + MCP3911_CHAN(7), + IIO_CHAN_SOFT_TIMESTAMP(8), +}; + +static const struct iio_chan_spec mcp3918_channels[] = { + MCP3911_CHAN(0), + IIO_CHAN_SOFT_TIMESTAMP(1), +}; + +static const struct iio_chan_spec mcp3919_channels[] = { + MCP3911_CHAN(0), + MCP3911_CHAN(1), + MCP3911_CHAN(2), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + static irqreturn_t mcp3911_trigger_handler(int irq, void *p) { struct iio_poll_func *pf = p; struct iio_dev *indio_dev = pf->indio_dev; struct mcp3911 *adc = iio_priv(indio_dev); + struct device *dev = &adc->spi->dev; struct spi_transfer xfer[] = { { .tx_buf = &adc->tx_buf, .len = 1, }, { .rx_buf = adc->rx_buf, - .len = sizeof(adc->rx_buf), + .len = (adc->chip->num_channels - 1) * 3, }, }; int scan_index; @@ -354,8 +536,7 @@ static irqreturn_t mcp3911_trigger_handler(int irq, void *p) adc->tx_buf = MCP3911_REG_READ(MCP3911_CHANNEL(0), adc->dev_addr); ret = spi_sync_transfer(adc->spi, xfer, ARRAY_SIZE(xfer)); if (ret < 0) { - dev_warn(&adc->spi->dev, - "failed to get conversion data\n"); + dev_warn(dev, "failed to get conversion data\n"); goto out; } @@ -387,43 +568,25 @@ static int mcp3911_config(struct mcp3911 *adc) u32 regval; int ret; - ret = device_property_read_u32(dev, "microchip,device-addr", &adc->dev_addr); - - /* - * Fallback to "device-addr" due to historical mismatch between - * dt-bindings and implementation - */ - if (ret) - device_property_read_u32(dev, "device-addr", &adc->dev_addr); - if (adc->dev_addr > 3) { - dev_err(&adc->spi->dev, - "invalid device address (%i). Must be in range 0-3.\n", - adc->dev_addr); - return -EINVAL; - } - dev_dbg(&adc->spi->dev, "use device address %i\n", adc->dev_addr); - ret = mcp3911_read(adc, MCP3911_REG_CONFIG, ®val, 2); if (ret) return ret; regval &= ~MCP3911_CONFIG_VREFEXT; if (adc->vref) { - dev_dbg(&adc->spi->dev, "use external voltage reference\n"); + dev_dbg(dev, "use external voltage reference\n"); regval |= FIELD_PREP(MCP3911_CONFIG_VREFEXT, 1); } else { - dev_dbg(&adc->spi->dev, - "use internal voltage reference (1.2V)\n"); + dev_dbg(dev, "use internal voltage reference (1.2V)\n"); regval |= FIELD_PREP(MCP3911_CONFIG_VREFEXT, 0); } regval &= ~MCP3911_CONFIG_CLKEXT; if (adc->clki) { - dev_dbg(&adc->spi->dev, "use external clock as clocksource\n"); + dev_dbg(dev, "use external clock as clocksource\n"); regval |= FIELD_PREP(MCP3911_CONFIG_CLKEXT, 1); } else { - dev_dbg(&adc->spi->dev, - "use crystal oscillator as clocksource\n"); + dev_dbg(dev, "use crystal oscillator as clocksource\n"); regval |= FIELD_PREP(MCP3911_CONFIG_CLKEXT, 0); } @@ -439,7 +602,97 @@ static int mcp3911_config(struct mcp3911 *adc) regval &= ~MCP3911_STATUSCOM_READ; regval |= FIELD_PREP(MCP3911_STATUSCOM_READ, 0x02); - return mcp3911_write(adc, MCP3911_REG_STATUSCOM, regval, 2); + regval &= ~MCP3911_STATUSCOM_DRHIZ; + if (device_property_read_bool(dev, "microchip,data-ready-hiz")) + regval |= FIELD_PREP(MCP3911_STATUSCOM_DRHIZ, 0); + else + regval |= FIELD_PREP(MCP3911_STATUSCOM_DRHIZ, 1); + + /* Disable offset to ignore any old values in offset register */ + regval &= ~MCP3911_STATUSCOM_EN_OFFCAL; + + ret = mcp3911_write(adc, MCP3911_REG_STATUSCOM, regval, 2); + if (ret) + return ret; + + /* Set gain to 1 for all channels */ + ret = mcp3911_read(adc, MCP3911_REG_GAIN, ®val, 1); + if (ret) + return ret; + + for (int i = 0; i < adc->chip->num_channels - 1; i++) { + adc->gain[i] = 1; + regval &= ~MCP3911_GAIN_MASK(i); + } + + return mcp3911_write(adc, MCP3911_REG_GAIN, regval, 1); +} + +static int mcp3910_config(struct mcp3911 *adc) +{ + struct device *dev = &adc->spi->dev; + u32 regval; + int ret; + + ret = mcp3911_read(adc, MCP3910_REG_CONFIG1, ®val, 3); + if (ret) + return ret; + + regval &= ~MCP3910_CONFIG1_VREFEXT; + if (adc->vref) { + dev_dbg(dev, "use external voltage reference\n"); + regval |= FIELD_PREP(MCP3910_CONFIG1_VREFEXT, 1); + } else { + dev_dbg(dev, "use internal voltage reference (1.2V)\n"); + regval |= FIELD_PREP(MCP3910_CONFIG1_VREFEXT, 0); + } + + regval &= ~MCP3910_CONFIG1_CLKEXT; + if (adc->clki) { + dev_dbg(dev, "use external clock as clocksource\n"); + regval |= FIELD_PREP(MCP3910_CONFIG1_CLKEXT, 1); + } else { + dev_dbg(dev, "use crystal oscillator as clocksource\n"); + regval |= FIELD_PREP(MCP3910_CONFIG1_CLKEXT, 0); + } + + ret = mcp3911_write(adc, MCP3910_REG_CONFIG1, regval, 3); + if (ret) + return ret; + + ret = mcp3911_read(adc, MCP3910_REG_STATUSCOM, ®val, 3); + if (ret) + return ret; + + /* Address counter incremented, cycle through register types */ + regval &= ~MCP3910_STATUSCOM_READ; + regval |= FIELD_PREP(MCP3910_STATUSCOM_READ, 0x02); + + regval &= ~MCP3910_STATUSCOM_DRHIZ; + if (device_property_read_bool(dev, "microchip,data-ready-hiz")) + regval |= FIELD_PREP(MCP3910_STATUSCOM_DRHIZ, 0); + else + regval |= FIELD_PREP(MCP3910_STATUSCOM_DRHIZ, 1); + + ret = mcp3911_write(adc, MCP3910_REG_STATUSCOM, regval, 3); + if (ret) + return ret; + + /* Set gain to 1 for all channels */ + ret = mcp3911_read(adc, MCP3910_REG_GAIN, ®val, 3); + if (ret) + return ret; + + for (int i = 0; i < adc->chip->num_channels - 1; i++) { + adc->gain[i] = 1; + regval &= ~MCP3911_GAIN_MASK(i); + } + ret = mcp3911_write(adc, MCP3910_REG_GAIN, regval, 3); + if (ret) + return ret; + + /* Disable offset to ignore any old values in offset register */ + return adc->chip->enable_offset(adc, 0); } static void mcp3911_cleanup_regulator(void *vref) @@ -466,26 +719,25 @@ static const struct iio_trigger_ops mcp3911_trigger_ops = { static int mcp3911_probe(struct spi_device *spi) { + struct device *dev = &spi->dev; struct iio_dev *indio_dev; struct mcp3911 *adc; int ret; - indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc)); + indio_dev = devm_iio_device_alloc(dev, sizeof(*adc)); if (!indio_dev) return -ENOMEM; adc = iio_priv(indio_dev); adc->spi = spi; + adc->chip = spi_get_device_match_data(spi); - adc->vref = devm_regulator_get_optional(&adc->spi->dev, "vref"); + adc->vref = devm_regulator_get_optional(dev, "vref"); if (IS_ERR(adc->vref)) { if (PTR_ERR(adc->vref) == -ENODEV) { adc->vref = NULL; } else { - dev_err(&adc->spi->dev, - "failed to get regulator (%ld)\n", - PTR_ERR(adc->vref)); - return PTR_ERR(adc->vref); + return dev_err_probe(dev, PTR_ERR(adc->vref), "failed to get regulator\n"); } } else { @@ -493,34 +745,35 @@ static int mcp3911_probe(struct spi_device *spi) if (ret) return ret; - ret = devm_add_action_or_reset(&spi->dev, - mcp3911_cleanup_regulator, adc->vref); + ret = devm_add_action_or_reset(dev, mcp3911_cleanup_regulator, adc->vref); if (ret) return ret; } - adc->clki = devm_clk_get_enabled(&adc->spi->dev, NULL); + adc->clki = devm_clk_get_enabled(dev, NULL); if (IS_ERR(adc->clki)) { if (PTR_ERR(adc->clki) == -ENOENT) { adc->clki = NULL; } else { - dev_err(&adc->spi->dev, - "failed to get adc clk (%ld)\n", - PTR_ERR(adc->clki)); - return PTR_ERR(adc->clki); + return dev_err_probe(dev, PTR_ERR(adc->clki), "failed to get adc clk\n"); } } - ret = mcp3911_config(adc); + /* + * Fallback to "device-addr" due to historical mismatch between + * dt-bindings and implementation. + */ + ret = device_property_read_u32(dev, "microchip,device-addr", &adc->dev_addr); if (ret) - return ret; + device_property_read_u32(dev, "device-addr", &adc->dev_addr); + if (adc->dev_addr > 3) { + return dev_err_probe(dev, -EINVAL, + "invalid device address (%i). Must be in range 0-3.\n", + adc->dev_addr); + } + dev_dbg(dev, "use device address %i\n", adc->dev_addr); - if (device_property_read_bool(&adc->spi->dev, "microchip,data-ready-hiz")) - ret = mcp3911_update(adc, MCP3911_REG_STATUSCOM, MCP3911_STATUSCOM_DRHIZ, - 0, 2); - else - ret = mcp3911_update(adc, MCP3911_REG_STATUSCOM, MCP3911_STATUSCOM_DRHIZ, - MCP3911_STATUSCOM_DRHIZ, 2); + ret = adc->chip->config(adc); if (ret) return ret; @@ -528,12 +781,12 @@ static int mcp3911_probe(struct spi_device *spi) if (ret) return ret; - /* Set gain to 1 for all channels */ - for (int i = 0; i < MCP3911_NUM_CHANNELS; i++) { + /* Set gain to 1 for all channels */ + for (int i = 0; i < adc->chip->num_channels - 1; i++) { adc->gain[i] = 1; ret = mcp3911_update(adc, MCP3911_REG_GAIN, - MCP3911_GAIN_MASK(i), - MCP3911_GAIN_VAL(i, 0), 1); + MCP3911_GAIN_MASK(i), + MCP3911_GAIN_VAL(i, 0), 1); if (ret) return ret; } @@ -543,21 +796,20 @@ static int mcp3911_probe(struct spi_device *spi) indio_dev->info = &mcp3911_info; spi_set_drvdata(spi, indio_dev); - indio_dev->channels = mcp3911_channels; - indio_dev->num_channels = ARRAY_SIZE(mcp3911_channels); + indio_dev->channels = adc->chip->channels; + indio_dev->num_channels = adc->chip->num_channels; mutex_init(&adc->lock); if (spi->irq > 0) { - adc->trig = devm_iio_trigger_alloc(&spi->dev, "%s-dev%d", - indio_dev->name, - iio_device_id(indio_dev)); + adc->trig = devm_iio_trigger_alloc(dev, "%s-dev%d", indio_dev->name, + iio_device_id(indio_dev)); if (!adc->trig) return -ENOMEM; adc->trig->ops = &mcp3911_trigger_ops; iio_trigger_set_drvdata(adc->trig, adc); - ret = devm_iio_trigger_register(&spi->dev, adc->trig); + ret = devm_iio_trigger_register(dev, adc->trig); if (ret) return ret; @@ -566,30 +818,120 @@ static int mcp3911_probe(struct spi_device *spi) * Some platforms might not allow the option to power it down so * don't enable the interrupt to avoid extra load on the system. */ - ret = devm_request_irq(&spi->dev, spi->irq, - &iio_trigger_generic_data_rdy_poll, IRQF_NO_AUTOEN | IRQF_ONESHOT, - indio_dev->name, adc->trig); + ret = devm_request_irq(dev, spi->irq, &iio_trigger_generic_data_rdy_poll, + IRQF_NO_AUTOEN | IRQF_ONESHOT, + indio_dev->name, adc->trig); if (ret) return ret; } - ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev, - NULL, - mcp3911_trigger_handler, NULL); + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, + mcp3911_trigger_handler, NULL); if (ret) return ret; - return devm_iio_device_register(&adc->spi->dev, indio_dev); + return devm_iio_device_register(dev, indio_dev); } +static const struct mcp3911_chip_info mcp3911_chip_info[] = { + [MCP3910] = { + .channels = mcp3910_channels, + .num_channels = ARRAY_SIZE(mcp3910_channels), + .config = mcp3910_config, + .get_osr = mcp3910_get_osr, + .set_osr = mcp3910_set_osr, + .enable_offset = mcp3910_enable_offset, + .get_offset = mcp3910_get_offset, + .set_offset = mcp3910_set_offset, + .set_scale = mcp3910_set_scale, + }, + [MCP3911] = { + .channels = mcp3911_channels, + .num_channels = ARRAY_SIZE(mcp3911_channels), + .config = mcp3911_config, + .get_osr = mcp3911_get_osr, + .set_osr = mcp3911_set_osr, + .enable_offset = mcp3911_enable_offset, + .get_offset = mcp3911_get_offset, + .set_offset = mcp3911_set_offset, + .set_scale = mcp3911_set_scale, + }, + [MCP3912] = { + .channels = mcp3912_channels, + .num_channels = ARRAY_SIZE(mcp3912_channels), + .config = mcp3910_config, + .get_osr = mcp3910_get_osr, + .set_osr = mcp3910_set_osr, + .enable_offset = mcp3910_enable_offset, + .get_offset = mcp3910_get_offset, + .set_offset = mcp3910_set_offset, + .set_scale = mcp3910_set_scale, + }, + [MCP3913] = { + .channels = mcp3913_channels, + .num_channels = ARRAY_SIZE(mcp3913_channels), + .config = mcp3910_config, + .get_osr = mcp3910_get_osr, + .set_osr = mcp3910_set_osr, + .enable_offset = mcp3910_enable_offset, + .get_offset = mcp3910_get_offset, + .set_offset = mcp3910_set_offset, + .set_scale = mcp3910_set_scale, + }, + [MCP3914] = { + .channels = mcp3914_channels, + .num_channels = ARRAY_SIZE(mcp3914_channels), + .config = mcp3910_config, + .get_osr = mcp3910_get_osr, + .set_osr = mcp3910_set_osr, + .enable_offset = mcp3910_enable_offset, + .get_offset = mcp3910_get_offset, + .set_offset = mcp3910_set_offset, + .set_scale = mcp3910_set_scale, + }, + [MCP3918] = { + .channels = mcp3918_channels, + .num_channels = ARRAY_SIZE(mcp3918_channels), + .config = mcp3910_config, + .get_osr = mcp3910_get_osr, + .set_osr = mcp3910_set_osr, + .enable_offset = mcp3910_enable_offset, + .get_offset = mcp3910_get_offset, + .set_offset = mcp3910_set_offset, + .set_scale = mcp3910_set_scale, + }, + [MCP3919] = { + .channels = mcp3919_channels, + .num_channels = ARRAY_SIZE(mcp3919_channels), + .config = mcp3910_config, + .get_osr = mcp3910_get_osr, + .set_osr = mcp3910_set_osr, + .enable_offset = mcp3910_enable_offset, + .get_offset = mcp3910_get_offset, + .set_offset = mcp3910_set_offset, + .set_scale = mcp3910_set_scale, + }, +}; static const struct of_device_id mcp3911_dt_ids[] = { - { .compatible = "microchip,mcp3911" }, + { .compatible = "microchip,mcp3910", .data = &mcp3911_chip_info[MCP3910] }, + { .compatible = "microchip,mcp3911", .data = &mcp3911_chip_info[MCP3911] }, + { .compatible = "microchip,mcp3912", .data = &mcp3911_chip_info[MCP3912] }, + { .compatible = "microchip,mcp3913", .data = &mcp3911_chip_info[MCP3913] }, + { .compatible = "microchip,mcp3914", .data = &mcp3911_chip_info[MCP3914] }, + { .compatible = "microchip,mcp3918", .data = &mcp3911_chip_info[MCP3918] }, + { .compatible = "microchip,mcp3919", .data = &mcp3911_chip_info[MCP3919] }, { } }; MODULE_DEVICE_TABLE(of, mcp3911_dt_ids); static const struct spi_device_id mcp3911_id[] = { - { "mcp3911", 0 }, + { "mcp3910", (kernel_ulong_t)&mcp3911_chip_info[MCP3910] }, + { "mcp3911", (kernel_ulong_t)&mcp3911_chip_info[MCP3911] }, + { "mcp3912", (kernel_ulong_t)&mcp3911_chip_info[MCP3912] }, + { "mcp3913", (kernel_ulong_t)&mcp3911_chip_info[MCP3913] }, + { "mcp3914", (kernel_ulong_t)&mcp3911_chip_info[MCP3914] }, + { "mcp3918", (kernel_ulong_t)&mcp3911_chip_info[MCP3918] }, + { "mcp3919", (kernel_ulong_t)&mcp3911_chip_info[MCP3919] }, { } }; MODULE_DEVICE_TABLE(spi, mcp3911_id); diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c index 320e3e7e3d4d..950ff13e6dde 100644 --- a/drivers/iio/adc/meson_saradc.c +++ b/drivers/iio/adc/meson_saradc.c @@ -1045,8 +1045,10 @@ static int meson_sar_adc_hw_enable(struct iio_dev *indio_dev) u32 regval; ret = meson_sar_adc_lock(indio_dev); - if (ret) + if (ret) { + dev_err(dev, "failed to lock adc\n"); goto err_lock; + } ret = regulator_enable(priv->vref); if (ret < 0) { @@ -1354,15 +1356,15 @@ static int meson_sar_adc_probe(struct platform_device *pdev) priv->regmap = devm_regmap_init_mmio(dev, base, priv->param->regmap_config); if (IS_ERR(priv->regmap)) - return PTR_ERR(priv->regmap); + return dev_err_probe(dev, PTR_ERR(priv->regmap), "failed to init regmap\n"); irq = irq_of_parse_and_map(dev->of_node, 0); if (!irq) - return -EINVAL; + return dev_err_probe(dev, -EINVAL, "failed to get irq\n"); ret = devm_request_irq(dev, irq, meson_sar_adc_irq, IRQF_SHARED, dev_name(dev), indio_dev); if (ret) - return ret; + return dev_err_probe(dev, ret, "failed to request irq\n"); priv->clkin = devm_clk_get(dev, "clkin"); if (IS_ERR(priv->clkin)) @@ -1384,7 +1386,7 @@ static int meson_sar_adc_probe(struct platform_device *pdev) if (!priv->adc_clk) { ret = meson_sar_adc_clk_init(indio_dev, base); if (ret) - return ret; + return dev_err_probe(dev, ret, "failed to init internal clk\n"); } priv->vref = devm_regulator_get(dev, "vref"); @@ -1426,8 +1428,10 @@ static int meson_sar_adc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, indio_dev); ret = iio_device_register(indio_dev); - if (ret) + if (ret) { + dev_err_probe(dev, ret, "failed to register iio device\n"); goto err_hw; + } return 0; @@ -1437,15 +1441,13 @@ err: return ret; } -static int meson_sar_adc_remove(struct platform_device *pdev) +static void meson_sar_adc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); iio_device_unregister(indio_dev); meson_sar_adc_hw_disable(indio_dev); - - return 0; } static int meson_sar_adc_suspend(struct device *dev) @@ -1480,7 +1482,7 @@ static DEFINE_SIMPLE_DEV_PM_OPS(meson_sar_adc_pm_ops, static struct platform_driver meson_sar_adc_driver = { .probe = meson_sar_adc_probe, - .remove = meson_sar_adc_remove, + .remove_new = meson_sar_adc_remove, .driver = { .name = "meson-saradc", .of_match_table = meson_sar_adc_of_match, diff --git a/drivers/iio/adc/mp2629_adc.c b/drivers/iio/adc/mp2629_adc.c index 88e947f300cf..7c66c2cd5be2 100644 --- a/drivers/iio/adc/mp2629_adc.c +++ b/drivers/iio/adc/mp2629_adc.c @@ -171,7 +171,7 @@ fail_disable: return ret; } -static int mp2629_adc_remove(struct platform_device *pdev) +static void mp2629_adc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct mp2629_adc *info = iio_priv(indio_dev); @@ -184,8 +184,6 @@ static int mp2629_adc_remove(struct platform_device *pdev) MP2629_ADC_CONTINUOUS, 0); regmap_update_bits(info->regmap, MP2629_REG_ADC_CTRL, MP2629_ADC_START, 0); - - return 0; } static const struct of_device_id mp2629_adc_of_match[] = { @@ -200,7 +198,7 @@ static struct platform_driver mp2629_adc_driver = { .of_match_table = mp2629_adc_of_match, }, .probe = mp2629_adc_probe, - .remove = mp2629_adc_remove, + .remove_new = mp2629_adc_remove, }; module_platform_driver(mp2629_adc_driver); diff --git a/drivers/iio/adc/mt6577_auxadc.c b/drivers/iio/adc/mt6577_auxadc.c index 0e134777bdd2..3343b54e8e44 100644 --- a/drivers/iio/adc/mt6577_auxadc.c +++ b/drivers/iio/adc/mt6577_auxadc.c @@ -246,6 +246,14 @@ static int mt6577_auxadc_suspend(struct device *dev) return 0; } +static void mt6577_power_off(void *data) +{ + struct mt6577_auxadc_device *adc_dev = data; + + mt6577_auxadc_mod_reg(adc_dev->reg_base + MT6577_AUXADC_MISC, + 0, MT6577_AUXADC_PDN_EN); +} + static int mt6577_auxadc_probe(struct platform_device *pdev) { struct mt6577_auxadc_device *adc_dev; @@ -265,29 +273,18 @@ static int mt6577_auxadc_probe(struct platform_device *pdev) indio_dev->num_channels = ARRAY_SIZE(mt6577_auxadc_iio_channels); adc_dev->reg_base = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(adc_dev->reg_base)) { - dev_err(&pdev->dev, "failed to get auxadc base address\n"); - return PTR_ERR(adc_dev->reg_base); - } - - adc_dev->adc_clk = devm_clk_get(&pdev->dev, "main"); - if (IS_ERR(adc_dev->adc_clk)) { - dev_err(&pdev->dev, "failed to get auxadc clock\n"); - return PTR_ERR(adc_dev->adc_clk); - } + if (IS_ERR(adc_dev->reg_base)) + return dev_err_probe(&pdev->dev, PTR_ERR(adc_dev->reg_base), + "failed to get auxadc base address\n"); - ret = clk_prepare_enable(adc_dev->adc_clk); - if (ret) { - dev_err(&pdev->dev, "failed to enable auxadc clock\n"); - return ret; - } + adc_dev->adc_clk = devm_clk_get_enabled(&pdev->dev, "main"); + if (IS_ERR(adc_dev->adc_clk)) + return dev_err_probe(&pdev->dev, PTR_ERR(adc_dev->adc_clk), + "failed to enable auxadc clock\n"); adc_clk_rate = clk_get_rate(adc_dev->adc_clk); - if (!adc_clk_rate) { - ret = -EINVAL; - dev_err(&pdev->dev, "null clock rate\n"); - goto err_disable_clk; - } + if (!adc_clk_rate) + return dev_err_probe(&pdev->dev, -EINVAL, "null clock rate\n"); adc_dev->dev_comp = device_get_match_data(&pdev->dev); @@ -296,36 +293,16 @@ static int mt6577_auxadc_probe(struct platform_device *pdev) mt6577_auxadc_mod_reg(adc_dev->reg_base + MT6577_AUXADC_MISC, MT6577_AUXADC_PDN_EN, 0); mdelay(MT6577_AUXADC_POWER_READY_MS); - platform_set_drvdata(pdev, indio_dev); - ret = iio_device_register(indio_dev); - if (ret < 0) { - dev_err(&pdev->dev, "failed to register iio device\n"); - goto err_power_off; - } - - return 0; - -err_power_off: - mt6577_auxadc_mod_reg(adc_dev->reg_base + MT6577_AUXADC_MISC, - 0, MT6577_AUXADC_PDN_EN); -err_disable_clk: - clk_disable_unprepare(adc_dev->adc_clk); - return ret; -} - -static int mt6577_auxadc_remove(struct platform_device *pdev) -{ - struct iio_dev *indio_dev = platform_get_drvdata(pdev); - struct mt6577_auxadc_device *adc_dev = iio_priv(indio_dev); - - iio_device_unregister(indio_dev); + ret = devm_add_action_or_reset(&pdev->dev, mt6577_power_off, adc_dev); + if (ret) + return dev_err_probe(&pdev->dev, ret, + "Failed to add action to managed power off\n"); - mt6577_auxadc_mod_reg(adc_dev->reg_base + MT6577_AUXADC_MISC, - 0, MT6577_AUXADC_PDN_EN); - - clk_disable_unprepare(adc_dev->adc_clk); + ret = devm_iio_device_register(&pdev->dev, indio_dev); + if (ret < 0) + return dev_err_probe(&pdev->dev, ret, "failed to register iio device\n"); return 0; } @@ -352,7 +329,6 @@ static struct platform_driver mt6577_auxadc_driver = { .pm = pm_sleep_ptr(&mt6577_auxadc_pm_ops), }, .probe = mt6577_auxadc_probe, - .remove = mt6577_auxadc_remove, }; module_platform_driver(mt6577_auxadc_driver); diff --git a/drivers/iio/adc/mxs-lradc-adc.c b/drivers/iio/adc/mxs-lradc-adc.c index a50f39143d3e..2e60c10ee4ff 100644 --- a/drivers/iio/adc/mxs-lradc-adc.c +++ b/drivers/iio/adc/mxs-lradc-adc.c @@ -807,7 +807,7 @@ err_trig: return ret; } -static int mxs_lradc_adc_remove(struct platform_device *pdev) +static void mxs_lradc_adc_remove(struct platform_device *pdev) { struct iio_dev *iio = platform_get_drvdata(pdev); struct mxs_lradc_adc *adc = iio_priv(iio); @@ -816,8 +816,6 @@ static int mxs_lradc_adc_remove(struct platform_device *pdev) mxs_lradc_adc_hw_stop(adc); iio_triggered_buffer_cleanup(iio); mxs_lradc_adc_trigger_remove(iio); - - return 0; } static struct platform_driver mxs_lradc_adc_driver = { @@ -825,7 +823,7 @@ static struct platform_driver mxs_lradc_adc_driver = { .name = "mxs-lradc-adc", }, .probe = mxs_lradc_adc_probe, - .remove = mxs_lradc_adc_remove, + .remove_new = mxs_lradc_adc_remove, }; module_platform_driver(mxs_lradc_adc_driver); diff --git a/drivers/iio/adc/npcm_adc.c b/drivers/iio/adc/npcm_adc.c index 3d9207c160eb..3a55465951e7 100644 --- a/drivers/iio/adc/npcm_adc.c +++ b/drivers/iio/adc/npcm_adc.c @@ -320,7 +320,7 @@ err_disable_clk: return ret; } -static int npcm_adc_remove(struct platform_device *pdev) +static void npcm_adc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct npcm_adc *info = iio_priv(indio_dev); @@ -333,13 +333,11 @@ static int npcm_adc_remove(struct platform_device *pdev) if (!IS_ERR(info->vref)) regulator_disable(info->vref); clk_disable_unprepare(info->adc_clk); - - return 0; } static struct platform_driver npcm_adc_driver = { .probe = npcm_adc_probe, - .remove = npcm_adc_remove, + .remove_new = npcm_adc_remove, .driver = { .name = "npcm_adc", .of_match_table = npcm_adc_match, diff --git a/drivers/iio/adc/palmas_gpadc.c b/drivers/iio/adc/palmas_gpadc.c index e202ea18af10..203cbbc70719 100644 --- a/drivers/iio/adc/palmas_gpadc.c +++ b/drivers/iio/adc/palmas_gpadc.c @@ -457,7 +457,7 @@ static int palmas_gpadc_get_calibrated_code(struct palmas_gpadc *adc, * * The gain error include both gain error, as specified in the datasheet, and * the gain error drift. These paramenters vary depending on device and whether - * the the channel is calibrated (trimmed) or not. + * the channel is calibrated (trimmed) or not. */ static int palmas_gpadc_threshold_with_tolerance(int val, const int INL, const int gain_error, diff --git a/drivers/iio/adc/qcom-pm8xxx-xoadc.c b/drivers/iio/adc/qcom-pm8xxx-xoadc.c index 64a3aeb6261c..01c5586df56d 100644 --- a/drivers/iio/adc/qcom-pm8xxx-xoadc.c +++ b/drivers/iio/adc/qcom-pm8xxx-xoadc.c @@ -957,7 +957,7 @@ out_disable_vref: return ret; } -static int pm8xxx_xoadc_remove(struct platform_device *pdev) +static void pm8xxx_xoadc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct pm8xxx_xoadc *adc = iio_priv(indio_dev); @@ -965,8 +965,6 @@ static int pm8xxx_xoadc_remove(struct platform_device *pdev) iio_device_unregister(indio_dev); regulator_disable(adc->vref); - - return 0; } static const struct xoadc_variant pm8018_variant = { @@ -1019,7 +1017,7 @@ static struct platform_driver pm8xxx_xoadc_driver = { .of_match_table = pm8xxx_xoadc_id_table, }, .probe = pm8xxx_xoadc_probe, - .remove = pm8xxx_xoadc_remove, + .remove_new = pm8xxx_xoadc_remove, }; module_platform_driver(pm8xxx_xoadc_driver); diff --git a/drivers/iio/adc/rcar-gyroadc.c b/drivers/iio/adc/rcar-gyroadc.c index b8972f673c9d..d524f2e8e927 100644 --- a/drivers/iio/adc/rcar-gyroadc.c +++ b/drivers/iio/adc/rcar-gyroadc.c @@ -559,7 +559,7 @@ err_clk_if_enable: return ret; } -static int rcar_gyroadc_remove(struct platform_device *pdev) +static void rcar_gyroadc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct rcar_gyroadc *priv = iio_priv(indio_dev); @@ -573,8 +573,6 @@ static int rcar_gyroadc_remove(struct platform_device *pdev) pm_runtime_set_suspended(dev); clk_disable_unprepare(priv->clk); rcar_gyroadc_deinit_supplies(indio_dev); - - return 0; } static int rcar_gyroadc_suspend(struct device *dev) @@ -603,7 +601,7 @@ static const struct dev_pm_ops rcar_gyroadc_pm_ops = { static struct platform_driver rcar_gyroadc_driver = { .probe = rcar_gyroadc_probe, - .remove = rcar_gyroadc_remove, + .remove_new = rcar_gyroadc_remove, .driver = { .name = DRIVER_NAME, .of_match_table = rcar_gyroadc_match, diff --git a/drivers/iio/adc/spear_adc.c b/drivers/iio/adc/spear_adc.c index ad54ef798109..71362c2ddf89 100644 --- a/drivers/iio/adc/spear_adc.c +++ b/drivers/iio/adc/spear_adc.c @@ -274,10 +274,9 @@ static int spear_adc_probe(struct platform_device *pdev) int irq; indio_dev = devm_iio_device_alloc(dev, sizeof(struct spear_adc_state)); - if (!indio_dev) { - dev_err(dev, "failed allocating iio device\n"); - return -ENOMEM; - } + if (!indio_dev) + return dev_err_probe(dev, -ENOMEM, + "failed allocating iio device\n"); st = iio_priv(indio_dev); @@ -297,37 +296,24 @@ static int spear_adc_probe(struct platform_device *pdev) st->adc_base_spear3xx = (struct adc_regs_spear3xx __iomem *)st->adc_base_spear6xx; - st->clk = devm_clk_get(dev, NULL); - if (IS_ERR(st->clk)) { - dev_err(dev, "failed getting clock\n"); - return PTR_ERR(st->clk); - } - - ret = clk_prepare_enable(st->clk); - if (ret) { - dev_err(dev, "failed enabling clock\n"); - return ret; - } + st->clk = devm_clk_get_enabled(dev, NULL); + if (IS_ERR(st->clk)) + return dev_err_probe(dev, PTR_ERR(st->clk), + "failed enabling clock\n"); irq = platform_get_irq(pdev, 0); - if (irq < 0) { - ret = irq; - goto errout2; - } + if (irq < 0) + return irq; ret = devm_request_irq(dev, irq, spear_adc_isr, 0, SPEAR_ADC_MOD_NAME, st); - if (ret < 0) { - dev_err(dev, "failed requesting interrupt\n"); - goto errout2; - } + if (ret < 0) + return dev_err_probe(dev, ret, "failed requesting interrupt\n"); if (of_property_read_u32(np, "sampling-frequency", - &st->sampling_freq)) { - dev_err(dev, "sampling-frequency missing in DT\n"); - ret = -EINVAL; - goto errout2; - } + &st->sampling_freq)) + return dev_err_probe(dev, -EINVAL, + "sampling-frequency missing in DT\n"); /* * Optional avg_samples defaults to 0, resulting in single data @@ -343,8 +329,6 @@ static int spear_adc_probe(struct platform_device *pdev) spear_adc_configure(st); - platform_set_drvdata(pdev, indio_dev); - init_completion(&st->completion); indio_dev->name = SPEAR_ADC_MOD_NAME; @@ -353,28 +337,13 @@ static int spear_adc_probe(struct platform_device *pdev) indio_dev->channels = spear_adc_iio_channels; indio_dev->num_channels = ARRAY_SIZE(spear_adc_iio_channels); - ret = iio_device_register(indio_dev); + ret = devm_iio_device_register(dev, indio_dev); if (ret) - goto errout2; + return ret; dev_info(dev, "SPEAR ADC driver loaded, IRQ %d\n", irq); return 0; - -errout2: - clk_disable_unprepare(st->clk); - return ret; -} - -static int spear_adc_remove(struct platform_device *pdev) -{ - struct iio_dev *indio_dev = platform_get_drvdata(pdev); - struct spear_adc_state *st = iio_priv(indio_dev); - - iio_device_unregister(indio_dev); - clk_disable_unprepare(st->clk); - - return 0; } #ifdef CONFIG_OF @@ -387,7 +356,6 @@ MODULE_DEVICE_TABLE(of, spear_adc_dt_ids); static struct platform_driver spear_adc_driver = { .probe = spear_adc_probe, - .remove = spear_adc_remove, .driver = { .name = SPEAR_ADC_MOD_NAME, .of_match_table = of_match_ptr(spear_adc_dt_ids), diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c index 2f082006550f..616dd729666a 100644 --- a/drivers/iio/adc/stm32-adc-core.c +++ b/drivers/iio/adc/stm32-adc-core.c @@ -17,10 +17,11 @@ #include <linux/irqdomain.h> #include <linux/mfd/syscon.h> #include <linux/module.h> -#include <linux/of_device.h> +#include <linux/of.h> #include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> +#include <linux/property.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> #include <linux/slab.h> @@ -720,8 +721,7 @@ static int stm32_adc_probe(struct platform_device *pdev) return -ENOMEM; platform_set_drvdata(pdev, &priv->common); - priv->cfg = (const struct stm32_adc_priv_cfg *) - of_match_device(dev->driver->of_match_table, dev)->data; + priv->cfg = device_get_match_data(dev); priv->nb_adc_max = priv->cfg->num_adcs; spin_lock_init(&priv->common.lock); @@ -814,7 +814,7 @@ err_pm_stop: return ret; } -static int stm32_adc_remove(struct platform_device *pdev) +static void stm32_adc_remove(struct platform_device *pdev) { struct stm32_adc_common *common = platform_get_drvdata(pdev); struct stm32_adc_priv *priv = to_stm32_adc_priv(common); @@ -826,8 +826,6 @@ static int stm32_adc_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); pm_runtime_set_suspended(&pdev->dev); pm_runtime_put_noidle(&pdev->dev); - - return 0; } static int stm32_adc_core_runtime_suspend(struct device *dev) @@ -908,7 +906,7 @@ MODULE_DEVICE_TABLE(of, stm32_adc_of_match); static struct platform_driver stm32_adc_driver = { .probe = stm32_adc_probe, - .remove = stm32_adc_remove, + .remove_new = stm32_adc_remove, .driver = { .name = "stm32-adc-core", .of_match_table = stm32_adc_of_match, diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c index f7613efb870d..b5d3c9cea5c4 100644 --- a/drivers/iio/adc/stm32-adc.c +++ b/drivers/iio/adc/stm32-adc.c @@ -2209,7 +2209,7 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev, ret = -EINVAL; goto err; } - strncpy(adc->chan_name[val], name, STM32_ADC_CH_SZ); + strscpy(adc->chan_name[val], name, STM32_ADC_CH_SZ); ret = stm32_adc_populate_int_ch(indio_dev, name, val); if (ret == -ENOENT) continue; @@ -2513,7 +2513,7 @@ err_dma_disable: return ret; } -static int stm32_adc_remove(struct platform_device *pdev) +static void stm32_adc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct stm32_adc *adc = iio_priv(indio_dev); @@ -2532,8 +2532,6 @@ static int stm32_adc_remove(struct platform_device *pdev) adc->rx_buf, adc->rx_dma_buf); dma_release_channel(adc->dma_chan); } - - return 0; } static int stm32_adc_suspend(struct device *dev) @@ -2659,7 +2657,7 @@ MODULE_DEVICE_TABLE(of, stm32_adc_of_match); static struct platform_driver stm32_adc_driver = { .probe = stm32_adc_probe, - .remove = stm32_adc_remove, + .remove_new = stm32_adc_remove, .driver = { .name = "stm32-adc", .of_match_table = stm32_adc_of_match, diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c index b5cc43d12b6f..ca08ae3108b2 100644 --- a/drivers/iio/adc/stm32-dfsdm-adc.c +++ b/drivers/iio/adc/stm32-dfsdm-adc.c @@ -1620,7 +1620,7 @@ err_cleanup: return ret; } -static int stm32_dfsdm_adc_remove(struct platform_device *pdev) +static void stm32_dfsdm_adc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct stm32_dfsdm_adc *adc = iio_priv(indio_dev); @@ -1629,8 +1629,6 @@ static int stm32_dfsdm_adc_remove(struct platform_device *pdev) of_platform_depopulate(&pdev->dev); iio_device_unregister(indio_dev); stm32_dfsdm_dma_release(indio_dev); - - return 0; } static int stm32_dfsdm_adc_suspend(struct device *dev) @@ -1677,7 +1675,7 @@ static struct platform_driver stm32_dfsdm_adc_driver = { .pm = pm_sleep_ptr(&stm32_dfsdm_adc_pm_ops), }, .probe = stm32_dfsdm_adc_probe, - .remove = stm32_dfsdm_adc_remove, + .remove_new = stm32_dfsdm_adc_remove, }; module_platform_driver(stm32_dfsdm_adc_driver); diff --git a/drivers/iio/adc/stm32-dfsdm-core.c b/drivers/iio/adc/stm32-dfsdm-core.c index 0f6ebb3061a0..a05d978b8cb8 100644 --- a/drivers/iio/adc/stm32-dfsdm-core.c +++ b/drivers/iio/adc/stm32-dfsdm-core.c @@ -436,7 +436,7 @@ pm_put: return ret; } -static int stm32_dfsdm_core_remove(struct platform_device *pdev) +static void stm32_dfsdm_core_remove(struct platform_device *pdev) { struct stm32_dfsdm *dfsdm = platform_get_drvdata(pdev); @@ -446,8 +446,6 @@ static int stm32_dfsdm_core_remove(struct platform_device *pdev) pm_runtime_set_suspended(&pdev->dev); pm_runtime_put_noidle(&pdev->dev); stm32_dfsdm_clk_disable_unprepare(dfsdm); - - return 0; } static int stm32_dfsdm_core_suspend(struct device *dev) @@ -508,7 +506,7 @@ static const struct dev_pm_ops stm32_dfsdm_core_pm_ops = { static struct platform_driver stm32_dfsdm_driver = { .probe = stm32_dfsdm_probe, - .remove = stm32_dfsdm_core_remove, + .remove_new = stm32_dfsdm_core_remove, .driver = { .name = "stm32-dfsdm", .of_match_table = stm32_dfsdm_of_match, diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c index 25bba96367a8..100ecced5fc1 100644 --- a/drivers/iio/adc/sun4i-gpadc-iio.c +++ b/drivers/iio/adc/sun4i-gpadc-iio.c @@ -669,7 +669,7 @@ err_map: return ret; } -static int sun4i_gpadc_remove(struct platform_device *pdev) +static void sun4i_gpadc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct sun4i_gpadc_iio *info = iio_priv(indio_dev); @@ -678,12 +678,10 @@ static int sun4i_gpadc_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); if (!IS_ENABLED(CONFIG_THERMAL_OF)) - return 0; + return; if (!info->no_irq) iio_map_array_unregister(indio_dev); - - return 0; } static const struct platform_device_id sun4i_gpadc_id[] = { @@ -702,7 +700,7 @@ static struct platform_driver sun4i_gpadc_driver = { }, .id_table = sun4i_gpadc_id, .probe = sun4i_gpadc_probe, - .remove = sun4i_gpadc_remove, + .remove_new = sun4i_gpadc_remove, }; MODULE_DEVICE_TABLE(of, sun4i_gpadc_of_id); diff --git a/drivers/iio/adc/ti-adc081c.c b/drivers/iio/adc/ti-adc081c.c index 50c450e7a55f..6c2cb3dabbbf 100644 --- a/drivers/iio/adc/ti-adc081c.c +++ b/drivers/iio/adc/ti-adc081c.c @@ -154,7 +154,6 @@ static void adc081c_reg_disable(void *reg) static int adc081c_probe(struct i2c_client *client) { - const struct i2c_device_id *id = i2c_client_get_device_id(client); struct iio_dev *iio; struct adc081c *adc; const struct adcxx1c_model *model; @@ -163,10 +162,7 @@ static int adc081c_probe(struct i2c_client *client) if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) return -EOPNOTSUPP; - if (dev_fwnode(&client->dev)) - model = device_get_match_data(&client->dev); - else - model = &adcxx1c_models[id->driver_data]; + model = i2c_get_match_data(client); iio = devm_iio_device_alloc(&client->dev, sizeof(*adc)); if (!iio) @@ -207,9 +203,9 @@ static int adc081c_probe(struct i2c_client *client) } static const struct i2c_device_id adc081c_id[] = { - { "adc081c", ADC081C }, - { "adc101c", ADC101C }, - { "adc121c", ADC121C }, + { "adc081c", (kernel_ulong_t)&adcxx1c_models[ADC081C] }, + { "adc101c", (kernel_ulong_t)&adcxx1c_models[ADC101C] }, + { "adc121c", (kernel_ulong_t)&adcxx1c_models[ADC121C] }, { } }; MODULE_DEVICE_TABLE(i2c, adc081c_id); diff --git a/drivers/iio/adc/ti-ads1015.c b/drivers/iio/adc/ti-ads1015.c index 075c75a87544..6799ea49dbc7 100644 --- a/drivers/iio/adc/ti-ads1015.c +++ b/drivers/iio/adc/ti-ads1015.c @@ -976,16 +976,13 @@ static int ads1015_set_conv_mode(struct ads1015_data *data, int mode) static int ads1015_probe(struct i2c_client *client) { - const struct i2c_device_id *id = i2c_client_get_device_id(client); const struct ads1015_chip_data *chip; struct iio_dev *indio_dev; struct ads1015_data *data; int ret; int i; - chip = device_get_match_data(&client->dev); - if (!chip) - chip = (const struct ads1015_chip_data *)id->driver_data; + chip = i2c_get_match_data(client); if (!chip) return dev_err_probe(&client->dev, -EINVAL, "Unknown chip\n"); @@ -1047,11 +1044,13 @@ static int ads1015_probe(struct i2c_client *client) 1 << ADS1015_CFG_COMP_LAT_SHIFT; switch (irq_trig) { + case IRQF_TRIGGER_FALLING: case IRQF_TRIGGER_LOW: cfg_comp |= ADS1015_CFG_COMP_POL_LOW << ADS1015_CFG_COMP_POL_SHIFT; break; case IRQF_TRIGGER_HIGH: + case IRQF_TRIGGER_RISING: cfg_comp |= ADS1015_CFG_COMP_POL_HIGH << ADS1015_CFG_COMP_POL_SHIFT; break; diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c index 8db7a01cb5fb..c755e8cd5220 100644 --- a/drivers/iio/adc/ti_am335x_adc.c +++ b/drivers/iio/adc/ti_am335x_adc.c @@ -681,7 +681,7 @@ err_dma: return err; } -static int tiadc_remove(struct platform_device *pdev) +static void tiadc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct tiadc_device *adc_dev = iio_priv(indio_dev); @@ -697,8 +697,6 @@ static int tiadc_remove(struct platform_device *pdev) step_en = get_adc_step_mask(adc_dev); am335x_tsc_se_clr(adc_dev->mfd_tscadc, step_en); - - return 0; } static int tiadc_suspend(struct device *dev) @@ -747,7 +745,7 @@ static struct platform_driver tiadc_driver = { .of_match_table = ti_adc_dt_ids, }, .probe = tiadc_probe, - .remove = tiadc_remove, + .remove_new = tiadc_remove, }; module_platform_driver(tiadc_driver); diff --git a/drivers/iio/adc/twl4030-madc.c b/drivers/iio/adc/twl4030-madc.c index c279c4f2c9b7..4a247ca25a44 100644 --- a/drivers/iio/adc/twl4030-madc.c +++ b/drivers/iio/adc/twl4030-madc.c @@ -892,7 +892,7 @@ err_current_generator: return ret; } -static int twl4030_madc_remove(struct platform_device *pdev) +static void twl4030_madc_remove(struct platform_device *pdev) { struct iio_dev *iio_dev = platform_get_drvdata(pdev); struct twl4030_madc_data *madc = iio_priv(iio_dev); @@ -903,8 +903,6 @@ static int twl4030_madc_remove(struct platform_device *pdev) twl4030_madc_set_power(madc, 0); regulator_disable(madc->usb3v1); - - return 0; } #ifdef CONFIG_OF @@ -917,7 +915,7 @@ MODULE_DEVICE_TABLE(of, twl_madc_of_match); static struct platform_driver twl4030_madc_driver = { .probe = twl4030_madc_probe, - .remove = twl4030_madc_remove, + .remove_new = twl4030_madc_remove, .driver = { .name = "twl4030_madc", .of_match_table = of_match_ptr(twl_madc_of_match), diff --git a/drivers/iio/adc/twl6030-gpadc.c b/drivers/iio/adc/twl6030-gpadc.c index 32873fb5f367..78bf55438b2c 100644 --- a/drivers/iio/adc/twl6030-gpadc.c +++ b/drivers/iio/adc/twl6030-gpadc.c @@ -16,9 +16,10 @@ */ #include <linux/interrupt.h> #include <linux/kernel.h> +#include <linux/mod_devicetable.h> #include <linux/module.h> #include <linux/platform_device.h> -#include <linux/of_platform.h> +#include <linux/property.h> #include <linux/mfd/twl.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> @@ -879,17 +880,14 @@ static int twl6030_gpadc_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct twl6030_gpadc_data *gpadc; const struct twl6030_gpadc_platform_data *pdata; - const struct of_device_id *match; struct iio_dev *indio_dev; int irq; int ret; - match = of_match_device(of_twl6030_match_tbl, dev); - if (!match) + pdata = device_get_match_data(&pdev->dev); + if (!pdata) return -EINVAL; - pdata = match->data; - indio_dev = devm_iio_device_alloc(dev, sizeof(*gpadc)); if (!indio_dev) return -ENOMEM; @@ -968,14 +966,12 @@ static int twl6030_gpadc_probe(struct platform_device *pdev) return iio_device_register(indio_dev); } -static int twl6030_gpadc_remove(struct platform_device *pdev) +static void twl6030_gpadc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); twl6030_gpadc_disable_irq(TWL6030_GPADC_RT_SW1_EOC_MASK); iio_device_unregister(indio_dev); - - return 0; } static int twl6030_gpadc_suspend(struct device *pdev) @@ -1007,7 +1003,7 @@ static DEFINE_SIMPLE_DEV_PM_OPS(twl6030_gpadc_pm_ops, twl6030_gpadc_suspend, static struct platform_driver twl6030_gpadc_driver = { .probe = twl6030_gpadc_probe, - .remove = twl6030_gpadc_remove, + .remove_new = twl6030_gpadc_remove, .driver = { .name = DRIVER_NAME, .pm = pm_sleep_ptr(&twl6030_gpadc_pm_ops), diff --git a/drivers/iio/adc/vf610_adc.c b/drivers/iio/adc/vf610_adc.c index ae31aafd2653..e4548df3f8fb 100644 --- a/drivers/iio/adc/vf610_adc.c +++ b/drivers/iio/adc/vf610_adc.c @@ -916,7 +916,7 @@ error_adc_clk_enable: return ret; } -static int vf610_adc_remove(struct platform_device *pdev) +static void vf610_adc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct vf610_adc *info = iio_priv(indio_dev); @@ -925,8 +925,6 @@ static int vf610_adc_remove(struct platform_device *pdev) iio_triggered_buffer_cleanup(indio_dev); regulator_disable(info->vref); clk_disable_unprepare(info->clk); - - return 0; } static int vf610_adc_suspend(struct device *dev) @@ -974,7 +972,7 @@ static DEFINE_SIMPLE_DEV_PM_OPS(vf610_adc_pm_ops, vf610_adc_suspend, static struct platform_driver vf610_adc_driver = { .probe = vf610_adc_probe, - .remove = vf610_adc_remove, + .remove_new = vf610_adc_remove, .driver = { .name = DRIVER_NAME, .of_match_table = vf610_adc_match, diff --git a/drivers/iio/addac/Kconfig b/drivers/iio/addac/Kconfig index 397544f23b85..16876b8b5c4e 100644 --- a/drivers/iio/addac/Kconfig +++ b/drivers/iio/addac/Kconfig @@ -40,6 +40,7 @@ config STX104 select REGMAP_MMIO select GPIOLIB select GPIO_REGMAP + select I8254 help Say yes here to build support for the Apex Embedded Systems STX104 integrated analog PC/104 card. diff --git a/drivers/iio/addac/ad74413r.c b/drivers/iio/addac/ad74413r.c index 6b0e8218f150..7af3e4b8fe3b 100644 --- a/drivers/iio/addac/ad74413r.c +++ b/drivers/iio/addac/ad74413r.c @@ -442,11 +442,29 @@ static int ad74413r_set_channel_function(struct ad74413r_state *st, int ret; ret = regmap_update_bits(st->regmap, + AD74413R_REG_CH_FUNC_SETUP_X(channel), + AD74413R_CH_FUNC_SETUP_MASK, + CH_FUNC_HIGH_IMPEDANCE); + if (ret) + return ret; + + /* Set DAC code to 0 prior to changing channel function */ + ret = ad74413r_set_channel_dac_code(st, channel, 0); + if (ret) + return ret; + + /* Delay required before transition to new desired mode */ + usleep_range(130, 150); + + ret = regmap_update_bits(st->regmap, AD74413R_REG_CH_FUNC_SETUP_X(channel), AD74413R_CH_FUNC_SETUP_MASK, func); if (ret) return ret; + /* Delay required before updating the new DAC code */ + usleep_range(150, 170); + if (func == CH_FUNC_CURRENT_INPUT_LOOP_POWER) ret = regmap_set_bits(st->regmap, AD74413R_REG_ADC_CONFIG_X(channel), @@ -705,8 +723,8 @@ static int ad74413r_get_input_current_scale(struct ad74413r_state *st, return IIO_VAL_FRACTIONAL; } -static int ad74413_get_input_current_offset(struct ad74413r_state *st, - unsigned int channel, int *val) +static int ad74413r_get_input_current_offset(struct ad74413r_state *st, + unsigned int channel, int *val) { unsigned int range; int voltage_range; @@ -991,7 +1009,7 @@ static int ad74413r_read_raw(struct iio_dev *indio_dev, return ad74413r_get_input_voltage_offset(st, chan->channel, val); case IIO_CURRENT: - return ad74413_get_input_current_offset(st, + return ad74413r_get_input_current_offset(st, chan->channel, val); default: return -EINVAL; diff --git a/drivers/iio/addac/stx104.c b/drivers/iio/addac/stx104.c index d1f7ce033b46..6946a65512ca 100644 --- a/drivers/iio/addac/stx104.c +++ b/drivers/iio/addac/stx104.c @@ -8,6 +8,7 @@ #include <linux/device.h> #include <linux/err.h> #include <linux/gpio/regmap.h> +#include <linux/i8254.h> #include <linux/iio/iio.h> #include <linux/iio/types.h> #include <linux/isa.h> @@ -55,6 +56,7 @@ MODULE_PARM_DESC(base, "Apex Embedded Systems STX104 base addresses"); #define STX104_ADC_STATUS (STX104_AIO_BASE + 0x8) #define STX104_ADC_CONTROL (STX104_AIO_BASE + 0x9) #define STX104_ADC_CONFIGURATION (STX104_AIO_BASE + 0x11) +#define STX104_I8254_BASE (STX104_AIO_BASE + 0x12) #define STX104_AIO_DATA_STRIDE 2 #define STX104_DAC_OFFSET(_channel) (STX104_DAC_BASE + STX104_AIO_DATA_STRIDE * (_channel)) @@ -77,6 +79,7 @@ MODULE_PARM_DESC(base, "Apex Embedded Systems STX104 base addresses"); /* ADC Configuration */ #define STX104_GAIN GENMASK(1, 0) #define STX104_ADBU BIT(2) +#define STX104_RBK GENMASK(7, 4) #define STX104_BIPOLAR 0 #define STX104_GAIN_X1 0 #define STX104_GAIN_X2 1 @@ -168,6 +171,32 @@ static const struct regmap_config dio_regmap_config = { .io_port = true, }; +static const struct regmap_range pit_wr_ranges[] = { + regmap_reg_range(0x0, 0x3), +}; +static const struct regmap_range pit_rd_ranges[] = { + regmap_reg_range(0x0, 0x2), +}; +static const struct regmap_access_table pit_wr_table = { + .yes_ranges = pit_wr_ranges, + .n_yes_ranges = ARRAY_SIZE(pit_wr_ranges), +}; +static const struct regmap_access_table pit_rd_table = { + .yes_ranges = pit_rd_ranges, + .n_yes_ranges = ARRAY_SIZE(pit_rd_ranges), +}; + +static const struct regmap_config pit_regmap_config = { + .name = "i8254", + .reg_bits = 8, + .reg_stride = 1, + .reg_base = STX104_I8254_BASE, + .val_bits = 8, + .io_port = true, + .wr_table = &pit_wr_table, + .rd_table = &pit_rd_table, +}; + static int stx104_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) { @@ -339,6 +368,21 @@ static const char *stx104_names[STX104_NGPIO] = { "DIN0", "DIN1", "DIN2", "DIN3", "DOUT0", "DOUT1", "DOUT2", "DOUT3" }; +static int bank_select_i8254(struct regmap *map) +{ + const u8 select_i8254[] = { 0x3, 0xB, 0xA }; + size_t i; + int err; + + for (i = 0; i < ARRAY_SIZE(select_i8254); i++) { + err = regmap_write_bits(map, STX104_ADC_CONFIGURATION, STX104_RBK, select_i8254[i]); + if (err) + return err; + } + + return 0; +} + static int stx104_init_hw(struct stx104_iio *const priv) { int err; @@ -361,7 +405,7 @@ static int stx104_init_hw(struct stx104_iio *const priv) if (err) return err; - return 0; + return bank_select_i8254(priv->aio_ctl_map); } static int stx104_probe(struct device *dev, unsigned int id) @@ -369,6 +413,7 @@ static int stx104_probe(struct device *dev, unsigned int id) struct iio_dev *indio_dev; struct stx104_iio *priv; struct gpio_regmap_config gpio_config; + struct i8254_regmap_config pit_config; void __iomem *stx104_base; struct regmap *aio_ctl_map; struct regmap *aio_data_map; @@ -406,6 +451,11 @@ static int stx104_probe(struct device *dev, unsigned int id) return dev_err_probe(dev, PTR_ERR(dio_map), "Unable to initialize dio register map\n"); + pit_config.map = devm_regmap_init_mmio(dev, stx104_base, &pit_regmap_config); + if (IS_ERR(pit_config.map)) + return dev_err_probe(dev, PTR_ERR(pit_config.map), + "Unable to initialize i8254 register map\n"); + priv = iio_priv(indio_dev); priv->aio_ctl_map = aio_ctl_map; priv->aio_data_map = aio_data_map; @@ -449,7 +499,13 @@ static int stx104_probe(struct device *dev, unsigned int id) .drvdata = dio_map, }; - return PTR_ERR_OR_ZERO(devm_gpio_regmap_register(dev, &gpio_config)); + err = PTR_ERR_OR_ZERO(devm_gpio_regmap_register(dev, &gpio_config)); + if (err) + return err; + + pit_config.parent = dev; + + return devm_i8254_regmap_register(dev, &pit_config); } static struct isa_driver stx104_driver = { @@ -464,3 +520,4 @@ module_isa_driver(stx104_driver, num_stx104); MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>"); MODULE_DESCRIPTION("Apex Embedded Systems STX104 IIO driver"); MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(I8254); diff --git a/drivers/iio/amplifiers/hmc425a.c b/drivers/iio/amplifiers/hmc425a.c index 108f0f1685ef..e87d35d50a95 100644 --- a/drivers/iio/amplifiers/hmc425a.c +++ b/drivers/iio/amplifiers/hmc425a.c @@ -21,6 +21,7 @@ enum hmc425a_type { ID_HMC425A, + ID_HMC540S, }; struct hmc425a_chip_info { @@ -70,6 +71,9 @@ static int hmc425a_read_raw(struct iio_dev *indio_dev, case ID_HMC425A: gain = ~code * -500; break; + case ID_HMC540S: + gain = ~code * -1000; + break; } *val = gain / 1000; @@ -106,6 +110,9 @@ static int hmc425a_write_raw(struct iio_dev *indio_dev, case ID_HMC425A: code = ~((abs(gain) / 500) & 0x3F); break; + case ID_HMC540S: + code = ~((abs(gain) / 1000) & 0xF); + break; } mutex_lock(&st->lock); @@ -157,6 +164,7 @@ static const struct iio_chan_spec hmc425a_channels[] = { /* Match table for of_platform binding */ static const struct of_device_id hmc425a_of_match[] = { { .compatible = "adi,hmc425a", .data = (void *)ID_HMC425A }, + { .compatible = "adi,hmc540s", .data = (void *)ID_HMC540S }, {}, }; MODULE_DEVICE_TABLE(of, hmc425a_of_match); @@ -171,6 +179,15 @@ static struct hmc425a_chip_info hmc425a_chip_info_tbl[] = { .gain_max = 0, .default_gain = -0x40, /* set default gain -31.5db*/ }, + [ID_HMC540S] = { + .name = "hmc540s", + .channels = hmc425a_channels, + .num_channels = ARRAY_SIZE(hmc425a_channels), + .num_gpios = 4, + .gain_min = -15000, + .gain_max = 0, + .default_gain = -0x10, /* set default gain -15.0db*/ + }, }; static int hmc425a_probe(struct platform_device *pdev) diff --git a/drivers/iio/chemical/atlas-ezo-sensor.c b/drivers/iio/chemical/atlas-ezo-sensor.c index 8fc926a2d33b..761a853a4d17 100644 --- a/drivers/iio/chemical/atlas-ezo-sensor.c +++ b/drivers/iio/chemical/atlas-ezo-sensor.c @@ -203,7 +203,6 @@ MODULE_DEVICE_TABLE(of, atlas_ezo_dt_ids); static int atlas_ezo_probe(struct i2c_client *client) { - const struct i2c_device_id *id = i2c_client_get_device_id(client); const struct atlas_ezo_device *chip; struct atlas_ezo_data *data; struct iio_dev *indio_dev; @@ -212,10 +211,7 @@ static int atlas_ezo_probe(struct i2c_client *client) if (!indio_dev) return -ENOMEM; - if (dev_fwnode(&client->dev)) - chip = device_get_match_data(&client->dev); - else - chip = (const struct atlas_ezo_device *)id->driver_data; + chip = i2c_get_match_data(client); if (!chip) return -EINVAL; diff --git a/drivers/iio/chemical/atlas-sensor.c b/drivers/iio/chemical/atlas-sensor.c index fb15bb216019..baf93e5e3ca7 100644 --- a/drivers/iio/chemical/atlas-sensor.c +++ b/drivers/iio/chemical/atlas-sensor.c @@ -87,7 +87,7 @@ enum { struct atlas_data { struct i2c_client *client; struct iio_trigger *trig; - struct atlas_device *chip; + const struct atlas_device *chip; struct regmap *regmap; struct irq_work work; unsigned int interrupt_enabled; @@ -353,7 +353,7 @@ struct atlas_device { int delay; }; -static struct atlas_device atlas_devices[] = { +static const struct atlas_device atlas_devices[] = { [ATLAS_PH_SM] = { .channels = atlas_ph_channels, .num_channels = 3, @@ -589,30 +589,29 @@ static const struct iio_info atlas_info = { }; static const struct i2c_device_id atlas_id[] = { - { "atlas-ph-sm", ATLAS_PH_SM }, - { "atlas-ec-sm", ATLAS_EC_SM }, - { "atlas-orp-sm", ATLAS_ORP_SM }, - { "atlas-do-sm", ATLAS_DO_SM }, - { "atlas-rtd-sm", ATLAS_RTD_SM }, + { "atlas-ph-sm", (kernel_ulong_t)&atlas_devices[ATLAS_PH_SM] }, + { "atlas-ec-sm", (kernel_ulong_t)&atlas_devices[ATLAS_EC_SM] }, + { "atlas-orp-sm", (kernel_ulong_t)&atlas_devices[ATLAS_ORP_SM] }, + { "atlas-do-sm", (kernel_ulong_t)&atlas_devices[ATLAS_DO_SM] }, + { "atlas-rtd-sm", (kernel_ulong_t)&atlas_devices[ATLAS_RTD_SM] }, {} }; MODULE_DEVICE_TABLE(i2c, atlas_id); static const struct of_device_id atlas_dt_ids[] = { - { .compatible = "atlas,ph-sm", .data = (void *)ATLAS_PH_SM, }, - { .compatible = "atlas,ec-sm", .data = (void *)ATLAS_EC_SM, }, - { .compatible = "atlas,orp-sm", .data = (void *)ATLAS_ORP_SM, }, - { .compatible = "atlas,do-sm", .data = (void *)ATLAS_DO_SM, }, - { .compatible = "atlas,rtd-sm", .data = (void *)ATLAS_RTD_SM, }, + { .compatible = "atlas,ph-sm", .data = &atlas_devices[ATLAS_PH_SM] }, + { .compatible = "atlas,ec-sm", .data = &atlas_devices[ATLAS_EC_SM] }, + { .compatible = "atlas,orp-sm", .data = &atlas_devices[ATLAS_ORP_SM] }, + { .compatible = "atlas,do-sm", .data = &atlas_devices[ATLAS_DO_SM] }, + { .compatible = "atlas,rtd-sm", .data = &atlas_devices[ATLAS_RTD_SM] }, { } }; MODULE_DEVICE_TABLE(of, atlas_dt_ids); static int atlas_probe(struct i2c_client *client) { - const struct i2c_device_id *id = i2c_client_get_device_id(client); struct atlas_data *data; - struct atlas_device *chip; + const struct atlas_device *chip; struct iio_trigger *trig; struct iio_dev *indio_dev; int ret; @@ -621,10 +620,7 @@ static int atlas_probe(struct i2c_client *client) if (!indio_dev) return -ENOMEM; - if (!dev_fwnode(&client->dev)) - chip = &atlas_devices[id->driver_data]; - else - chip = &atlas_devices[(unsigned long)device_get_match_data(&client->dev)]; + chip = i2c_get_match_data(client); indio_dev->info = &atlas_info; indio_dev->name = ATLAS_DRV_NAME; diff --git a/drivers/iio/chemical/sgp30.c b/drivers/iio/chemical/sgp30.c index b509cff9ce37..21730d62b5c8 100644 --- a/drivers/iio/chemical/sgp30.c +++ b/drivers/iio/chemical/sgp30.c @@ -114,6 +114,7 @@ struct sgp_data { }; struct sgp_device { + unsigned long product_id; const struct iio_chan_spec *channels; int num_channels; }; @@ -182,10 +183,12 @@ static const struct iio_chan_spec sgpc3_channels[] = { static const struct sgp_device sgp_devices[] = { [SGP30] = { + .product_id = SGP30, .channels = sgp30_channels, .num_channels = ARRAY_SIZE(sgp30_channels), }, [SGPC3] = { + .product_id = SGPC3, .channels = sgpc3_channels, .num_channels = ARRAY_SIZE(sgpc3_channels), }, @@ -491,28 +494,25 @@ static const struct iio_info sgp_info = { }; static const struct of_device_id sgp_dt_ids[] = { - { .compatible = "sensirion,sgp30", .data = (void *)SGP30 }, - { .compatible = "sensirion,sgpc3", .data = (void *)SGPC3 }, + { .compatible = "sensirion,sgp30", .data = &sgp_devices[SGP30] }, + { .compatible = "sensirion,sgpc3", .data = &sgp_devices[SGPC3] }, { } }; static int sgp_probe(struct i2c_client *client) { const struct i2c_device_id *id = i2c_client_get_device_id(client); + const struct sgp_device *match_data; struct device *dev = &client->dev; struct iio_dev *indio_dev; struct sgp_data *data; - unsigned long product_id; int ret; indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); if (!indio_dev) return -ENOMEM; - if (dev_fwnode(dev)) - product_id = (unsigned long)device_get_match_data(dev); - else - product_id = id->driver_data; + match_data = i2c_get_match_data(client); data = iio_priv(indio_dev); i2c_set_clientdata(client, indio_dev); @@ -528,15 +528,15 @@ static int sgp_probe(struct i2c_client *client) data->feature_set = be16_to_cpu(data->buffer.raw_words[0].value); - ret = sgp_check_compat(data, product_id); + ret = sgp_check_compat(data, match_data->product_id); if (ret) return ret; indio_dev->info = &sgp_info; indio_dev->name = id->name; indio_dev->modes = INDIO_DIRECT_MODE; - indio_dev->channels = sgp_devices[product_id].channels; - indio_dev->num_channels = sgp_devices[product_id].num_channels; + indio_dev->channels = match_data->channels; + indio_dev->num_channels = match_data->num_channels; sgp_init(data); @@ -562,8 +562,8 @@ static void sgp_remove(struct i2c_client *client) } static const struct i2c_device_id sgp_id[] = { - { "sgp30", SGP30 }, - { "sgpc3", SGPC3 }, + { "sgp30", (kernel_ulong_t)&sgp_devices[SGP30] }, + { "sgpc3", (kernel_ulong_t)&sgp_devices[SGPC3] }, { } }; diff --git a/drivers/iio/chemical/vz89x.c b/drivers/iio/chemical/vz89x.c index 13555f4f401a..5b358bcd311b 100644 --- a/drivers/iio/chemical/vz89x.c +++ b/drivers/iio/chemical/vz89x.c @@ -342,19 +342,17 @@ static const struct vz89x_chip_data vz89x_chips[] = { }; static const struct of_device_id vz89x_dt_ids[] = { - { .compatible = "sgx,vz89x", .data = (void *) VZ89X }, - { .compatible = "sgx,vz89te", .data = (void *) VZ89TE }, + { .compatible = "sgx,vz89x", .data = &vz89x_chips[VZ89X] }, + { .compatible = "sgx,vz89te", .data = &vz89x_chips[VZ89TE] }, { } }; MODULE_DEVICE_TABLE(of, vz89x_dt_ids); static int vz89x_probe(struct i2c_client *client) { - const struct i2c_device_id *id = i2c_client_get_device_id(client); struct device *dev = &client->dev; struct iio_dev *indio_dev; struct vz89x_data *data; - int chip_id; indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); if (!indio_dev) @@ -369,14 +367,10 @@ static int vz89x_probe(struct i2c_client *client) else return -EOPNOTSUPP; - if (!dev_fwnode(dev)) - chip_id = id->driver_data; - else - chip_id = (unsigned long)device_get_match_data(dev); + data->chip = i2c_get_match_data(client); i2c_set_clientdata(client, indio_dev); data->client = client; - data->chip = &vz89x_chips[chip_id]; data->last_update = jiffies - HZ; mutex_init(&data->lock); @@ -391,8 +385,8 @@ static int vz89x_probe(struct i2c_client *client) } static const struct i2c_device_id vz89x_id[] = { - { "vz89x", VZ89X }, - { "vz89te", VZ89TE }, + { "vz89x", (kernel_ulong_t)&vz89x_chips[VZ89X] }, + { "vz89te", (kernel_ulong_t)&vz89x_chips[VZ89TE] }, { } }; MODULE_DEVICE_TABLE(i2c, vz89x_id); diff --git a/drivers/iio/dac/dpot-dac.c b/drivers/iio/dac/dpot-dac.c index 83ce9489259c..7332064d0852 100644 --- a/drivers/iio/dac/dpot-dac.c +++ b/drivers/iio/dac/dpot-dac.c @@ -226,15 +226,13 @@ disable_reg: return ret; } -static int dpot_dac_remove(struct platform_device *pdev) +static void dpot_dac_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct dpot_dac *dac = iio_priv(indio_dev); iio_device_unregister(indio_dev); regulator_disable(dac->vref); - - return 0; } static const struct of_device_id dpot_dac_match[] = { @@ -245,7 +243,7 @@ MODULE_DEVICE_TABLE(of, dpot_dac_match); static struct platform_driver dpot_dac_driver = { .probe = dpot_dac_probe, - .remove = dpot_dac_remove, + .remove_new = dpot_dac_remove, .driver = { .name = "iio-dpot-dac", .of_match_table = dpot_dac_match, diff --git a/drivers/iio/dac/lpc18xx_dac.c b/drivers/iio/dac/lpc18xx_dac.c index 60467c6f2c6e..b3aa4443a6a4 100644 --- a/drivers/iio/dac/lpc18xx_dac.c +++ b/drivers/iio/dac/lpc18xx_dac.c @@ -165,7 +165,7 @@ dis_reg: return ret; } -static int lpc18xx_dac_remove(struct platform_device *pdev) +static void lpc18xx_dac_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct lpc18xx_dac *dac = iio_priv(indio_dev); @@ -175,8 +175,6 @@ static int lpc18xx_dac_remove(struct platform_device *pdev) writel(0, dac->base + LPC18XX_DAC_CTRL); clk_disable_unprepare(dac->clk); regulator_disable(dac->vref); - - return 0; } static const struct of_device_id lpc18xx_dac_match[] = { @@ -187,7 +185,7 @@ MODULE_DEVICE_TABLE(of, lpc18xx_dac_match); static struct platform_driver lpc18xx_dac_driver = { .probe = lpc18xx_dac_probe, - .remove = lpc18xx_dac_remove, + .remove_new = lpc18xx_dac_remove, .driver = { .name = "lpc18xx-dac", .of_match_table = lpc18xx_dac_match, diff --git a/drivers/iio/dac/mcp4725.c b/drivers/iio/dac/mcp4725.c index f4a3124d29f2..25bb1c0490af 100644 --- a/drivers/iio/dac/mcp4725.c +++ b/drivers/iio/dac/mcp4725.c @@ -30,9 +30,14 @@ #define MCP472X_REF_VREF_UNBUFFERED 0x02 #define MCP472X_REF_VREF_BUFFERED 0x03 +struct mcp4725_chip_info { + const struct iio_chan_spec *chan_spec; + u8 dac_reg_offset; + bool use_ext_ref_voltage; +}; + struct mcp4725_data { struct i2c_client *client; - int id; unsigned ref_mode; bool vref_buffered; u16 dac_value; @@ -384,6 +389,7 @@ static int mcp4725_probe_dt(struct device *dev, static int mcp4725_probe(struct i2c_client *client) { const struct i2c_device_id *id = i2c_client_get_device_id(client); + const struct mcp4725_chip_info *info; struct mcp4725_data *data; struct iio_dev *indio_dev; struct mcp4725_platform_data *pdata, pdata_dt; @@ -398,10 +404,7 @@ static int mcp4725_probe(struct i2c_client *client) data = iio_priv(indio_dev); i2c_set_clientdata(client, indio_dev); data->client = client; - if (dev_fwnode(&client->dev)) - data->id = (uintptr_t)device_get_match_data(&client->dev); - else - data->id = id->driver_data; + info = i2c_get_match_data(client); pdata = dev_get_platdata(&client->dev); if (!pdata) { @@ -414,7 +417,7 @@ static int mcp4725_probe(struct i2c_client *client) pdata = &pdata_dt; } - if (data->id == MCP4725 && pdata->use_vref) { + if (info->use_ext_ref_voltage && pdata->use_vref) { dev_err(&client->dev, "external reference is unavailable on MCP4725"); return -EINVAL; @@ -455,12 +458,12 @@ static int mcp4725_probe(struct i2c_client *client) indio_dev->name = id->name; indio_dev->info = &mcp4725_info; - indio_dev->channels = &mcp472x_channel[id->driver_data]; + indio_dev->channels = info->chan_spec; indio_dev->num_channels = 1; indio_dev->modes = INDIO_DIRECT_MODE; /* read current DAC value and settings */ - err = i2c_master_recv(client, inbuf, data->id == MCP4725 ? 3 : 4); + err = i2c_master_recv(client, inbuf, info->dac_reg_offset); if (err < 0) { dev_err(&client->dev, "failed to read DAC value"); @@ -470,10 +473,10 @@ static int mcp4725_probe(struct i2c_client *client) data->powerdown = pd > 0; data->powerdown_mode = pd ? pd - 1 : 2; /* largest resistor to gnd */ data->dac_value = (inbuf[1] << 4) | (inbuf[2] >> 4); - if (data->id == MCP4726) + if (!info->use_ext_ref_voltage) ref = (inbuf[3] >> 3) & 0x3; - if (data->id == MCP4726 && ref != data->ref_mode) { + if (!info->use_ext_ref_voltage && ref != data->ref_mode) { dev_info(&client->dev, "voltage reference mode differs (conf: %u, eeprom: %u), setting %u", data->ref_mode, ref, data->ref_mode); @@ -510,9 +513,20 @@ static void mcp4725_remove(struct i2c_client *client) regulator_disable(data->vdd_reg); } +static const struct mcp4725_chip_info mcp4725 = { + .chan_spec = &mcp472x_channel[MCP4725], + .dac_reg_offset = 3, + .use_ext_ref_voltage = true, +}; + +static const struct mcp4725_chip_info mcp4726 = { + .chan_spec = &mcp472x_channel[MCP4726], + .dac_reg_offset = 4, +}; + static const struct i2c_device_id mcp4725_id[] = { - { "mcp4725", MCP4725 }, - { "mcp4726", MCP4726 }, + { "mcp4725", (kernel_ulong_t)&mcp4725 }, + { "mcp4726", (kernel_ulong_t)&mcp4726 }, { } }; MODULE_DEVICE_TABLE(i2c, mcp4725_id); @@ -520,11 +534,11 @@ MODULE_DEVICE_TABLE(i2c, mcp4725_id); static const struct of_device_id mcp4725_of_match[] = { { .compatible = "microchip,mcp4725", - .data = (void *)MCP4725 + .data = &mcp4725 }, { .compatible = "microchip,mcp4726", - .data = (void *)MCP4726 + .data = &mcp4726 }, { } }; diff --git a/drivers/iio/dac/stm32-dac-core.c b/drivers/iio/dac/stm32-dac-core.c index 83bf184e3adc..e150ac729154 100644 --- a/drivers/iio/dac/stm32-dac-core.c +++ b/drivers/iio/dac/stm32-dac-core.c @@ -9,9 +9,12 @@ #include <linux/clk.h> #include <linux/delay.h> +#include <linux/mod_devicetable.h> #include <linux/module.h> #include <linux/of_platform.h> +#include <linux/platform_device.h> #include <linux/pm_runtime.h> +#include <linux/property.h> #include <linux/regulator/consumer.h> #include <linux/reset.h> @@ -94,16 +97,12 @@ static int stm32_dac_probe(struct platform_device *pdev) struct reset_control *rst; int ret; - if (!dev->of_node) - return -ENODEV; - priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; platform_set_drvdata(pdev, &priv->common); - cfg = (const struct stm32_dac_cfg *) - of_match_device(dev->driver->of_match_table, dev)->data; + cfg = device_get_match_data(dev); mmio = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(mmio)) @@ -183,7 +182,7 @@ err_pm_stop: return ret; } -static int stm32_dac_remove(struct platform_device *pdev) +static void stm32_dac_remove(struct platform_device *pdev) { pm_runtime_get_sync(&pdev->dev); of_platform_depopulate(&pdev->dev); @@ -191,8 +190,6 @@ static int stm32_dac_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); pm_runtime_set_suspended(&pdev->dev); pm_runtime_put_noidle(&pdev->dev); - - return 0; } static int stm32_dac_core_resume(struct device *dev) @@ -249,7 +246,7 @@ MODULE_DEVICE_TABLE(of, stm32_dac_of_match); static struct platform_driver stm32_dac_driver = { .probe = stm32_dac_probe, - .remove = stm32_dac_remove, + .remove_new = stm32_dac_remove, .driver = { .name = "stm32-dac-core", .of_match_table = stm32_dac_of_match, diff --git a/drivers/iio/dac/stm32-dac.c b/drivers/iio/dac/stm32-dac.c index 15eb44075107..5a722f307e7e 100644 --- a/drivers/iio/dac/stm32-dac.c +++ b/drivers/iio/dac/stm32-dac.c @@ -11,12 +11,13 @@ #include <linux/delay.h> #include <linux/iio/iio.h> #include <linux/kernel.h> +#include <linux/kstrtox.h> #include <linux/module.h> #include <linux/mod_devicetable.h> #include <linux/of.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> -#include <linux/string_helpers.h> +#include <linux/string_choices.h> #include "stm32-dac-core.h" @@ -361,7 +362,7 @@ err_pm_put: return ret; } -static int stm32_dac_remove(struct platform_device *pdev) +static void stm32_dac_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); @@ -370,8 +371,6 @@ static int stm32_dac_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); pm_runtime_set_suspended(&pdev->dev); pm_runtime_put_noidle(&pdev->dev); - - return 0; } static int stm32_dac_suspend(struct device *dev) @@ -399,7 +398,7 @@ MODULE_DEVICE_TABLE(of, stm32_dac_of_match); static struct platform_driver stm32_dac_driver = { .probe = stm32_dac_probe, - .remove = stm32_dac_remove, + .remove_new = stm32_dac_remove, .driver = { .name = "stm32-dac", .of_match_table = stm32_dac_of_match, diff --git a/drivers/iio/dac/ti-dac5571.c b/drivers/iio/dac/ti-dac5571.c index bab11b9adc25..efb1269a77c1 100644 --- a/drivers/iio/dac/ti-dac5571.c +++ b/drivers/iio/dac/ti-dac5571.c @@ -313,7 +313,6 @@ static int dac5571_probe(struct i2c_client *client) const struct dac5571_spec *spec; struct dac5571_data *data; struct iio_dev *indio_dev; - enum chip_id chip_id; int ret, i; indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); @@ -329,12 +328,7 @@ static int dac5571_probe(struct i2c_client *client) indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->channels = dac5571_channels; - if (dev_fwnode(dev)) - chip_id = (uintptr_t)device_get_match_data(dev); - else - chip_id = id->driver_data; - - spec = &dac5571_spec[chip_id]; + spec = i2c_get_match_data(client); indio_dev->num_channels = spec->num_channels; data->spec = spec; @@ -392,31 +386,31 @@ static void dac5571_remove(struct i2c_client *i2c) } static const struct of_device_id dac5571_of_id[] = { - {.compatible = "ti,dac5571", .data = (void *)single_8bit}, - {.compatible = "ti,dac6571", .data = (void *)single_10bit}, - {.compatible = "ti,dac7571", .data = (void *)single_12bit}, - {.compatible = "ti,dac5574", .data = (void *)quad_8bit}, - {.compatible = "ti,dac6574", .data = (void *)quad_10bit}, - {.compatible = "ti,dac7574", .data = (void *)quad_12bit}, - {.compatible = "ti,dac5573", .data = (void *)quad_8bit}, - {.compatible = "ti,dac6573", .data = (void *)quad_10bit}, - {.compatible = "ti,dac7573", .data = (void *)quad_12bit}, - {.compatible = "ti,dac121c081", .data = (void *)single_12bit}, + {.compatible = "ti,dac121c081", .data = &dac5571_spec[single_12bit] }, + {.compatible = "ti,dac5571", .data = &dac5571_spec[single_8bit] }, + {.compatible = "ti,dac6571", .data = &dac5571_spec[single_10bit] }, + {.compatible = "ti,dac7571", .data = &dac5571_spec[single_12bit] }, + {.compatible = "ti,dac5574", .data = &dac5571_spec[quad_8bit] }, + {.compatible = "ti,dac6574", .data = &dac5571_spec[quad_10bit] }, + {.compatible = "ti,dac7574", .data = &dac5571_spec[quad_12bit] }, + {.compatible = "ti,dac5573", .data = &dac5571_spec[quad_8bit] }, + {.compatible = "ti,dac6573", .data = &dac5571_spec[quad_10bit] }, + {.compatible = "ti,dac7573", .data = &dac5571_spec[quad_12bit] }, {} }; MODULE_DEVICE_TABLE(of, dac5571_of_id); static const struct i2c_device_id dac5571_id[] = { - {"dac5571", single_8bit}, - {"dac6571", single_10bit}, - {"dac7571", single_12bit}, - {"dac5574", quad_8bit}, - {"dac6574", quad_10bit}, - {"dac7574", quad_12bit}, - {"dac5573", quad_8bit}, - {"dac6573", quad_10bit}, - {"dac7573", quad_12bit}, - {"dac121c081", single_12bit}, + {"dac121c081", (kernel_ulong_t)&dac5571_spec[single_12bit] }, + {"dac5571", (kernel_ulong_t)&dac5571_spec[single_8bit] }, + {"dac6571", (kernel_ulong_t)&dac5571_spec[single_10bit] }, + {"dac7571", (kernel_ulong_t)&dac5571_spec[single_12bit] }, + {"dac5574", (kernel_ulong_t)&dac5571_spec[quad_8bit] }, + {"dac6574", (kernel_ulong_t)&dac5571_spec[quad_10bit] }, + {"dac7574", (kernel_ulong_t)&dac5571_spec[quad_12bit] }, + {"dac5573", (kernel_ulong_t)&dac5571_spec[quad_8bit] }, + {"dac6573", (kernel_ulong_t)&dac5571_spec[quad_10bit] }, + {"dac7573", (kernel_ulong_t)&dac5571_spec[quad_12bit] }, {} }; MODULE_DEVICE_TABLE(i2c, dac5571_id); diff --git a/drivers/iio/dac/vf610_dac.c b/drivers/iio/dac/vf610_dac.c index fc182250c622..de73bc5a1c93 100644 --- a/drivers/iio/dac/vf610_dac.c +++ b/drivers/iio/dac/vf610_dac.c @@ -231,7 +231,7 @@ error_iio_device_register: return ret; } -static int vf610_dac_remove(struct platform_device *pdev) +static void vf610_dac_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct vf610_dac *info = iio_priv(indio_dev); @@ -239,8 +239,6 @@ static int vf610_dac_remove(struct platform_device *pdev) iio_device_unregister(indio_dev); vf610_dac_exit(info); clk_disable_unprepare(info->clk); - - return 0; } static int vf610_dac_suspend(struct device *dev) @@ -274,7 +272,7 @@ static DEFINE_SIMPLE_DEV_PM_OPS(vf610_dac_pm_ops, vf610_dac_suspend, static struct platform_driver vf610_dac_driver = { .probe = vf610_dac_probe, - .remove = vf610_dac_remove, + .remove_new = vf610_dac_remove, .driver = { .name = "vf610-dac", .of_match_table = vf610_dac_match, diff --git a/drivers/iio/frequency/adf4350.c b/drivers/iio/frequency/adf4350.c index 85e289700c3c..4abf80f75ef5 100644 --- a/drivers/iio/frequency/adf4350.c +++ b/drivers/iio/frequency/adf4350.c @@ -33,7 +33,6 @@ enum { struct adf4350_state { struct spi_device *spi; - struct regulator *reg; struct gpio_desc *lock_detect_gpiod; struct adf4350_platform_data *pdata; struct clk *clk; @@ -469,6 +468,15 @@ static struct adf4350_platform_data *adf4350_parse_dt(struct device *dev) return pdata; } +static void adf4350_power_down(void *data) +{ + struct iio_dev *indio_dev = data; + struct adf4350_state *st = iio_priv(indio_dev); + + st->regs[ADF4350_REG2] |= ADF4350_REG2_POWER_DOWN_EN; + adf4350_sync_config(st); +} + static int adf4350_probe(struct spi_device *spi) { struct adf4350_platform_data *pdata; @@ -491,31 +499,21 @@ static int adf4350_probe(struct spi_device *spi) } if (!pdata->clkin) { - clk = devm_clk_get(&spi->dev, "clkin"); + clk = devm_clk_get_enabled(&spi->dev, "clkin"); if (IS_ERR(clk)) - return -EPROBE_DEFER; - - ret = clk_prepare_enable(clk); - if (ret < 0) - return ret; + return PTR_ERR(clk); } indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); - if (indio_dev == NULL) { - ret = -ENOMEM; - goto error_disable_clk; - } + if (indio_dev == NULL) + return -ENOMEM; st = iio_priv(indio_dev); - st->reg = devm_regulator_get(&spi->dev, "vcc"); - if (!IS_ERR(st->reg)) { - ret = regulator_enable(st->reg); - if (ret) - goto error_disable_clk; - } + ret = devm_regulator_get_enable(&spi->dev, "vcc"); + if (ret) + return ret; - spi_set_drvdata(spi, indio_dev); st->spi = spi; st->pdata = pdata; @@ -544,47 +542,21 @@ static int adf4350_probe(struct spi_device *spi) st->lock_detect_gpiod = devm_gpiod_get_optional(&spi->dev, NULL, GPIOD_IN); - if (IS_ERR(st->lock_detect_gpiod)) { - ret = PTR_ERR(st->lock_detect_gpiod); - goto error_disable_reg; - } + if (IS_ERR(st->lock_detect_gpiod)) + return PTR_ERR(st->lock_detect_gpiod); if (pdata->power_up_frequency) { ret = adf4350_set_freq(st, pdata->power_up_frequency); if (ret) - goto error_disable_reg; + return ret; } - ret = iio_device_register(indio_dev); + ret = devm_add_action_or_reset(&spi->dev, adf4350_power_down, indio_dev); if (ret) - goto error_disable_reg; - - return 0; - -error_disable_reg: - if (!IS_ERR(st->reg)) - regulator_disable(st->reg); -error_disable_clk: - clk_disable_unprepare(clk); - - return ret; -} - -static void adf4350_remove(struct spi_device *spi) -{ - struct iio_dev *indio_dev = spi_get_drvdata(spi); - struct adf4350_state *st = iio_priv(indio_dev); - struct regulator *reg = st->reg; - - st->regs[ADF4350_REG2] |= ADF4350_REG2_POWER_DOWN_EN; - adf4350_sync_config(st); - - iio_device_unregister(indio_dev); - - clk_disable_unprepare(st->clk); + return dev_err_probe(&spi->dev, ret, + "Failed to add action to managed power down\n"); - if (!IS_ERR(reg)) - regulator_disable(reg); + return devm_iio_device_register(&spi->dev, indio_dev); } static const struct of_device_id adf4350_of_match[] = { @@ -607,7 +579,6 @@ static struct spi_driver adf4350_driver = { .of_match_table = adf4350_of_match, }, .probe = adf4350_probe, - .remove = adf4350_remove, .id_table = adf4350_id, }; module_spi_driver(adf4350_driver); diff --git a/drivers/iio/gyro/hid-sensor-gyro-3d.c b/drivers/iio/gyro/hid-sensor-gyro-3d.c index 698c50da1f10..59a38bf9459b 100644 --- a/drivers/iio/gyro/hid-sensor-gyro-3d.c +++ b/drivers/iio/gyro/hid-sensor-gyro-3d.c @@ -359,7 +359,7 @@ error_remove_trigger: } /* Function to deinitialize the processing for usage id */ -static int hid_gyro_3d_remove(struct platform_device *pdev) +static void hid_gyro_3d_remove(struct platform_device *pdev) { struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; struct iio_dev *indio_dev = platform_get_drvdata(pdev); @@ -368,8 +368,6 @@ static int hid_gyro_3d_remove(struct platform_device *pdev) sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_GYRO_3D); iio_device_unregister(indio_dev); hid_sensor_remove_trigger(indio_dev, &gyro_state->common_attributes); - - return 0; } static const struct platform_device_id hid_gyro_3d_ids[] = { @@ -388,7 +386,7 @@ static struct platform_driver hid_gyro_3d_platform_driver = { .pm = &hid_sensor_pm_ops, }, .probe = hid_gyro_3d_probe, - .remove = hid_gyro_3d_remove, + .remove_new = hid_gyro_3d_remove, }; module_platform_driver(hid_gyro_3d_platform_driver); diff --git a/drivers/iio/humidity/hid-sensor-humidity.c b/drivers/iio/humidity/hid-sensor-humidity.c index fa0fe404a70a..bf6d2636a85e 100644 --- a/drivers/iio/humidity/hid-sensor-humidity.c +++ b/drivers/iio/humidity/hid-sensor-humidity.c @@ -260,7 +260,7 @@ error_remove_trigger: } /* Function to deinitialize the processing for usage id */ -static int hid_humidity_remove(struct platform_device *pdev) +static void hid_humidity_remove(struct platform_device *pdev) { struct hid_sensor_hub_device *hsdev = dev_get_platdata(&pdev->dev); struct iio_dev *indio_dev = platform_get_drvdata(pdev); @@ -269,8 +269,6 @@ static int hid_humidity_remove(struct platform_device *pdev) iio_device_unregister(indio_dev); sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_HUMIDITY); hid_sensor_remove_trigger(indio_dev, &humid_st->common_attributes); - - return 0; } static const struct platform_device_id hid_humidity_ids[] = { @@ -289,7 +287,7 @@ static struct platform_driver hid_humidity_platform_driver = { .pm = &hid_sensor_pm_ops, }, .probe = hid_humidity_probe, - .remove = hid_humidity_remove, + .remove_new = hid_humidity_remove, }; module_platform_driver(hid_humidity_platform_driver); diff --git a/drivers/iio/humidity/si7005.c b/drivers/iio/humidity/si7005.c index ebfb79bc9edc..9465908cc65e 100644 --- a/drivers/iio/humidity/si7005.c +++ b/drivers/iio/humidity/si7005.c @@ -169,9 +169,16 @@ static const struct i2c_device_id si7005_id[] = { }; MODULE_DEVICE_TABLE(i2c, si7005_id); +static const struct of_device_id si7005_dt_ids[] = { + { .compatible = "silabs,si7005" }, + { } +}; +MODULE_DEVICE_TABLE(of, si7005_dt_ids); + static struct i2c_driver si7005_driver = { .driver = { .name = "si7005", + .of_match_table = si7005_dt_ids, }, .probe = si7005_probe, .id_table = si7005_id, diff --git a/drivers/iio/iio_core.h b/drivers/iio/iio_core.h index 501e286702ef..1a38b1915e7a 100644 --- a/drivers/iio/iio_core.h +++ b/drivers/iio/iio_core.h @@ -30,9 +30,6 @@ struct iio_ioctl_handler { unsigned int cmd, unsigned long arg); }; -long iio_device_ioctl(struct iio_dev *indio_dev, struct file *filp, - unsigned int cmd, unsigned long arg); - void iio_device_ioctl_handler_register(struct iio_dev *indio_dev, struct iio_ioctl_handler *h); void iio_device_ioctl_handler_unregister(struct iio_ioctl_handler *h); diff --git a/drivers/iio/imu/adis16475.c b/drivers/iio/imu/adis16475.c index 17275a53ca2c..b7cbe1565aee 100644 --- a/drivers/iio/imu/adis16475.c +++ b/drivers/iio/imu/adis16475.c @@ -31,6 +31,12 @@ #define ADIS16475_REG_Y_ACCEL_L 0x14 #define ADIS16475_REG_Z_ACCEL_L 0x18 #define ADIS16475_REG_TEMP_OUT 0x1c +#define ADIS16475_REG_X_DELTANG_L 0x24 +#define ADIS16475_REG_Y_DELTANG_L 0x28 +#define ADIS16475_REG_Z_DELTANG_L 0x2C +#define ADIS16475_REG_X_DELTVEL_L 0x30 +#define ADIS16475_REG_Y_DELTVEL_L 0x34 +#define ADIS16475_REG_Z_DELTVEL_L 0x38 #define ADIS16475_REG_X_GYRO_BIAS_L 0x40 #define ADIS16475_REG_Y_GYRO_BIAS_L 0x44 #define ADIS16475_REG_Z_GYRO_BIAS_L 0x48 @@ -55,6 +61,7 @@ #define ADIS16475_REG_PROD_ID 0x72 #define ADIS16475_REG_SERIAL_NUM 0x74 #define ADIS16475_REG_FLASH_CNT 0x7c +#define ADIS16500_BURST_DATA_SEL_MASK BIT(8) #define ADIS16500_BURST32_MASK BIT(9) #define ADIS16500_BURST32(x) FIELD_PREP(ADIS16500_BURST32_MASK, x) /* number of data elements in burst mode */ @@ -65,6 +72,8 @@ #define ADIS16475_BURST_MAX_SPEED 1000000 #define ADIS16475_LSB_DEC_MASK BIT(0) #define ADIS16475_LSB_FIR_MASK BIT(1) +#define ADIS16500_BURST_DATA_SEL_0_CHN_MASK GENMASK(5, 0) +#define ADIS16500_BURST_DATA_SEL_1_CHN_MASK GENMASK(12, 7) enum { ADIS16475_SYNC_DIRECT = 1, @@ -84,16 +93,20 @@ struct adis16475_chip_info { const struct adis16475_sync *sync; const struct adis_data adis_data; const char *name; +#define ADIS16475_HAS_BURST32 BIT(0) +#define ADIS16475_HAS_BURST_DELTA_DATA BIT(1) + const long flags; u32 num_channels; u32 gyro_max_val; u32 gyro_max_scale; u32 accel_max_val; u32 accel_max_scale; u32 temp_scale; + u32 deltang_max_val; + u32 deltvel_max_val; u32 int_clk; u16 max_dec; u8 num_sync; - bool has_burst32; }; struct adis16475 { @@ -115,6 +128,12 @@ enum { ADIS16475_SCAN_ACCEL_Y, ADIS16475_SCAN_ACCEL_Z, ADIS16475_SCAN_TEMP, + ADIS16475_SCAN_DELTANG_X, + ADIS16475_SCAN_DELTANG_Y, + ADIS16475_SCAN_DELTANG_Z, + ADIS16475_SCAN_DELTVEL_X, + ADIS16475_SCAN_DELTVEL_Y, + ADIS16475_SCAN_DELTVEL_Z, }; static bool low_rate_allow; @@ -451,6 +470,14 @@ static int adis16475_read_raw(struct iio_dev *indio_dev, case IIO_TEMP: *val = st->info->temp_scale; return IIO_VAL_INT; + case IIO_DELTA_ANGL: + *val = st->info->deltang_max_val; + *val2 = 31; + return IIO_VAL_FRACTIONAL_LOG2; + case IIO_DELTA_VELOCITY: + *val = st->info->deltvel_max_val; + *val2 = 31; + return IIO_VAL_FRACTIONAL_LOG2; default: return -EINVAL; } @@ -551,6 +578,57 @@ static int adis16475_write_raw(struct iio_dev *indio_dev, }, \ } +#define ADIS16475_MOD_CHAN_DELTA(_type, _mod, _address, _si, _r_bits, _s_bits) { \ + .type = (_type), \ + .modified = 1, \ + .channel2 = (_mod), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \ + .address = (_address), \ + .scan_index = _si, \ + .scan_type = { \ + .sign = 's', \ + .realbits = (_r_bits), \ + .storagebits = (_s_bits), \ + .endianness = IIO_BE, \ + }, \ + } + +#define ADIS16475_DELTANG_CHAN(_mod) \ + ADIS16475_MOD_CHAN_DELTA(IIO_DELTA_ANGL, IIO_MOD_ ## _mod, \ + ADIS16475_REG_ ## _mod ## _DELTANG_L, ADIS16475_SCAN_DELTANG_ ## _mod, 32, 32) + +#define ADIS16475_DELTVEL_CHAN(_mod) \ + ADIS16475_MOD_CHAN_DELTA(IIO_DELTA_VELOCITY, IIO_MOD_ ## _mod, \ + ADIS16475_REG_ ## _mod ## _DELTVEL_L, ADIS16475_SCAN_DELTVEL_ ## _mod, 32, 32) + +#define ADIS16475_DELTANG_CHAN_NO_SCAN(_mod) \ + ADIS16475_MOD_CHAN_DELTA(IIO_DELTA_ANGL, IIO_MOD_ ## _mod, \ + ADIS16475_REG_ ## _mod ## _DELTANG_L, -1, 32, 32) + +#define ADIS16475_DELTVEL_CHAN_NO_SCAN(_mod) \ + ADIS16475_MOD_CHAN_DELTA(IIO_DELTA_VELOCITY, IIO_MOD_ ## _mod, \ + ADIS16475_REG_ ## _mod ## _DELTVEL_L, -1, 32, 32) + +static const struct iio_chan_spec adis16477_channels[] = { + ADIS16475_GYRO_CHANNEL(X), + ADIS16475_GYRO_CHANNEL(Y), + ADIS16475_GYRO_CHANNEL(Z), + ADIS16475_ACCEL_CHANNEL(X), + ADIS16475_ACCEL_CHANNEL(Y), + ADIS16475_ACCEL_CHANNEL(Z), + ADIS16475_TEMP_CHANNEL(), + ADIS16475_DELTANG_CHAN(X), + ADIS16475_DELTANG_CHAN(Y), + ADIS16475_DELTANG_CHAN(Z), + ADIS16475_DELTVEL_CHAN(X), + ADIS16475_DELTVEL_CHAN(Y), + ADIS16475_DELTVEL_CHAN(Z), + IIO_CHAN_SOFT_TIMESTAMP(13) +}; + static const struct iio_chan_spec adis16475_channels[] = { ADIS16475_GYRO_CHANNEL(X), ADIS16475_GYRO_CHANNEL(Y), @@ -559,6 +637,12 @@ static const struct iio_chan_spec adis16475_channels[] = { ADIS16475_ACCEL_CHANNEL(Y), ADIS16475_ACCEL_CHANNEL(Z), ADIS16475_TEMP_CHANNEL(), + ADIS16475_DELTANG_CHAN_NO_SCAN(X), + ADIS16475_DELTANG_CHAN_NO_SCAN(Y), + ADIS16475_DELTANG_CHAN_NO_SCAN(Z), + ADIS16475_DELTVEL_CHAN_NO_SCAN(X), + ADIS16475_DELTVEL_CHAN_NO_SCAN(Y), + ADIS16475_DELTVEL_CHAN_NO_SCAN(Z), IIO_CHAN_SOFT_TIMESTAMP(7) }; @@ -662,6 +746,8 @@ static const struct adis16475_chip_info adis16475_chip_info[] = { .accel_max_val = 1, .accel_max_scale = IIO_M_S_2_TO_G(800 << 16), .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(2160), + .deltvel_max_val = 400, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, @@ -677,6 +763,8 @@ static const struct adis16475_chip_info adis16475_chip_info[] = { .accel_max_val = 1, .accel_max_scale = IIO_M_S_2_TO_G(4000 << 16), .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(360), + .deltvel_max_val = 100, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, @@ -692,6 +780,8 @@ static const struct adis16475_chip_info adis16475_chip_info[] = { .accel_max_val = 1, .accel_max_scale = IIO_M_S_2_TO_G(4000 << 16), .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(720), + .deltvel_max_val = 100, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, @@ -707,6 +797,8 @@ static const struct adis16475_chip_info adis16475_chip_info[] = { .accel_max_val = 1, .accel_max_scale = IIO_M_S_2_TO_G(4000 << 16), .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(2160), + .deltvel_max_val = 100, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, @@ -715,50 +807,56 @@ static const struct adis16475_chip_info adis16475_chip_info[] = { }, [ADIS16477_1] = { .name = "adis16477-1", - .num_channels = ARRAY_SIZE(adis16475_channels), - .channels = adis16475_channels, + .num_channels = ARRAY_SIZE(adis16477_channels), + .channels = adis16477_channels, .gyro_max_val = 1, .gyro_max_scale = IIO_RAD_TO_DEGREE(160 << 16), .accel_max_val = 1, .accel_max_scale = IIO_M_S_2_TO_G(800 << 16), .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(360), + .deltvel_max_val = 400, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, .num_sync = ARRAY_SIZE(adis16475_sync_mode), - .has_burst32 = true, + .flags = ADIS16475_HAS_BURST32 | ADIS16475_HAS_BURST_DELTA_DATA, .adis_data = ADIS16475_DATA(16477, &adis16475_timeouts), }, [ADIS16477_2] = { .name = "adis16477-2", - .num_channels = ARRAY_SIZE(adis16475_channels), - .channels = adis16475_channels, + .num_channels = ARRAY_SIZE(adis16477_channels), + .channels = adis16477_channels, .gyro_max_val = 1, .gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16), .accel_max_val = 1, .accel_max_scale = IIO_M_S_2_TO_G(800 << 16), .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(720), + .deltvel_max_val = 400, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, .num_sync = ARRAY_SIZE(adis16475_sync_mode), - .has_burst32 = true, + .flags = ADIS16475_HAS_BURST32 | ADIS16475_HAS_BURST_DELTA_DATA, .adis_data = ADIS16475_DATA(16477, &adis16475_timeouts), }, [ADIS16477_3] = { .name = "adis16477-3", - .num_channels = ARRAY_SIZE(adis16475_channels), - .channels = adis16475_channels, + .num_channels = ARRAY_SIZE(adis16477_channels), + .channels = adis16477_channels, .gyro_max_val = 1, .gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16), .accel_max_val = 1, .accel_max_scale = IIO_M_S_2_TO_G(800 << 16), .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(2160), + .deltvel_max_val = 400, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, .num_sync = ARRAY_SIZE(adis16475_sync_mode), - .has_burst32 = true, + .flags = ADIS16475_HAS_BURST32 | ADIS16475_HAS_BURST_DELTA_DATA, .adis_data = ADIS16475_DATA(16477, &adis16475_timeouts), }, [ADIS16465_1] = { @@ -770,6 +868,8 @@ static const struct adis16475_chip_info adis16475_chip_info[] = { .accel_max_val = 1, .accel_max_scale = IIO_M_S_2_TO_G(4000 << 16), .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(360), + .deltvel_max_val = 100, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, @@ -785,6 +885,8 @@ static const struct adis16475_chip_info adis16475_chip_info[] = { .accel_max_val = 1, .accel_max_scale = IIO_M_S_2_TO_G(4000 << 16), .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(720), + .deltvel_max_val = 100, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, @@ -800,6 +902,8 @@ static const struct adis16475_chip_info adis16475_chip_info[] = { .accel_max_val = 1, .accel_max_scale = IIO_M_S_2_TO_G(4000 << 16), .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(2160), + .deltvel_max_val = 100, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, @@ -815,6 +919,8 @@ static const struct adis16475_chip_info adis16475_chip_info[] = { .accel_max_val = 1, .accel_max_scale = IIO_M_S_2_TO_G(800 << 16), .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(360), + .deltvel_max_val = 400, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, @@ -830,6 +936,8 @@ static const struct adis16475_chip_info adis16475_chip_info[] = { .accel_max_val = 1, .accel_max_scale = IIO_M_S_2_TO_G(800 << 16), .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(720), + .deltvel_max_val = 400, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, @@ -845,6 +953,8 @@ static const struct adis16475_chip_info adis16475_chip_info[] = { .accel_max_val = 1, .accel_max_scale = IIO_M_S_2_TO_G(800 << 16), .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(2160), + .deltvel_max_val = 400, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, @@ -853,129 +963,168 @@ static const struct adis16475_chip_info adis16475_chip_info[] = { }, [ADIS16500] = { .name = "adis16500", - .num_channels = ARRAY_SIZE(adis16475_channels), - .channels = adis16475_channels, + .num_channels = ARRAY_SIZE(adis16477_channels), + .channels = adis16477_channels, .gyro_max_val = 1, .gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16), .accel_max_val = 392, .accel_max_scale = 32000 << 16, .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(2160), + .deltvel_max_val = 400, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, /* pulse sync not supported */ .num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1, - .has_burst32 = true, + .flags = ADIS16475_HAS_BURST32 | ADIS16475_HAS_BURST_DELTA_DATA, .adis_data = ADIS16475_DATA(16500, &adis1650x_timeouts), }, [ADIS16505_1] = { .name = "adis16505-1", - .num_channels = ARRAY_SIZE(adis16475_channels), - .channels = adis16475_channels, + .num_channels = ARRAY_SIZE(adis16477_channels), + .channels = adis16477_channels, .gyro_max_val = 1, .gyro_max_scale = IIO_RAD_TO_DEGREE(160 << 16), .accel_max_val = 78, .accel_max_scale = 32000 << 16, .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(360), + .deltvel_max_val = 100, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, /* pulse sync not supported */ .num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1, - .has_burst32 = true, + .flags = ADIS16475_HAS_BURST32 | ADIS16475_HAS_BURST_DELTA_DATA, .adis_data = ADIS16475_DATA(16505, &adis1650x_timeouts), }, [ADIS16505_2] = { .name = "adis16505-2", - .num_channels = ARRAY_SIZE(adis16475_channels), - .channels = adis16475_channels, + .num_channels = ARRAY_SIZE(adis16477_channels), + .channels = adis16477_channels, .gyro_max_val = 1, .gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16), .accel_max_val = 78, .accel_max_scale = 32000 << 16, .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(720), + .deltvel_max_val = 100, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, /* pulse sync not supported */ .num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1, - .has_burst32 = true, + .flags = ADIS16475_HAS_BURST32 | ADIS16475_HAS_BURST_DELTA_DATA, .adis_data = ADIS16475_DATA(16505, &adis1650x_timeouts), }, [ADIS16505_3] = { .name = "adis16505-3", - .num_channels = ARRAY_SIZE(adis16475_channels), - .channels = adis16475_channels, + .num_channels = ARRAY_SIZE(adis16477_channels), + .channels = adis16477_channels, .gyro_max_val = 1, .gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16), .accel_max_val = 78, .accel_max_scale = 32000 << 16, .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(2160), + .deltvel_max_val = 100, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, /* pulse sync not supported */ .num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1, - .has_burst32 = true, + .flags = ADIS16475_HAS_BURST32 | ADIS16475_HAS_BURST_DELTA_DATA, .adis_data = ADIS16475_DATA(16505, &adis1650x_timeouts), }, [ADIS16507_1] = { .name = "adis16507-1", - .num_channels = ARRAY_SIZE(adis16475_channels), - .channels = adis16475_channels, + .num_channels = ARRAY_SIZE(adis16477_channels), + .channels = adis16477_channels, .gyro_max_val = 1, .gyro_max_scale = IIO_RAD_TO_DEGREE(160 << 16), .accel_max_val = 392, .accel_max_scale = 32000 << 16, .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(360), + .deltvel_max_val = 400, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, /* pulse sync not supported */ .num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1, - .has_burst32 = true, + .flags = ADIS16475_HAS_BURST32 | ADIS16475_HAS_BURST_DELTA_DATA, .adis_data = ADIS16475_DATA(16507, &adis1650x_timeouts), }, [ADIS16507_2] = { .name = "adis16507-2", - .num_channels = ARRAY_SIZE(adis16475_channels), - .channels = adis16475_channels, + .num_channels = ARRAY_SIZE(adis16477_channels), + .channels = adis16477_channels, .gyro_max_val = 1, .gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16), .accel_max_val = 392, .accel_max_scale = 32000 << 16, .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(720), + .deltvel_max_val = 400, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, /* pulse sync not supported */ .num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1, - .has_burst32 = true, + .flags = ADIS16475_HAS_BURST32 | ADIS16475_HAS_BURST_DELTA_DATA, .adis_data = ADIS16475_DATA(16507, &adis1650x_timeouts), }, [ADIS16507_3] = { .name = "adis16507-3", - .num_channels = ARRAY_SIZE(adis16475_channels), - .channels = adis16475_channels, + .num_channels = ARRAY_SIZE(adis16477_channels), + .channels = adis16477_channels, .gyro_max_val = 1, .gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16), .accel_max_val = 392, .accel_max_scale = 32000 << 16, .temp_scale = 100, + .deltang_max_val = IIO_DEGREE_TO_RAD(2160), + .deltvel_max_val = 400, .int_clk = 2000, .max_dec = 1999, .sync = adis16475_sync_mode, /* pulse sync not supported */ .num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1, - .has_burst32 = true, + .flags = ADIS16475_HAS_BURST32 | ADIS16475_HAS_BURST_DELTA_DATA, .adis_data = ADIS16475_DATA(16507, &adis1650x_timeouts), }, }; +static int adis16475_update_scan_mode(struct iio_dev *indio_dev, + const unsigned long *scan_mask) +{ + u16 en; + int ret; + struct adis16475 *st = iio_priv(indio_dev); + + if (st->info->flags & ADIS16475_HAS_BURST_DELTA_DATA) { + if ((*scan_mask & ADIS16500_BURST_DATA_SEL_0_CHN_MASK) && + (*scan_mask & ADIS16500_BURST_DATA_SEL_1_CHN_MASK)) + return -EINVAL; + if (*scan_mask & ADIS16500_BURST_DATA_SEL_0_CHN_MASK) + en = FIELD_PREP(ADIS16500_BURST_DATA_SEL_MASK, 0); + else + en = FIELD_PREP(ADIS16500_BURST_DATA_SEL_MASK, 1); + + ret = __adis_update_bits(&st->adis, ADIS16475_REG_MSG_CTRL, + ADIS16500_BURST_DATA_SEL_MASK, en); + if (ret) + return ret; + } + + return adis_update_scan_mode(indio_dev, scan_mask); +} + static const struct iio_info adis16475_info = { .read_raw = &adis16475_read_raw, .write_raw = &adis16475_write_raw, - .update_scan_mode = adis_update_scan_mode, + .update_scan_mode = adis16475_update_scan_mode, .debugfs_reg_access = adis_debugfs_reg_access, }; @@ -998,7 +1147,7 @@ static void adis16475_burst32_check(struct adis16475 *st) int ret; struct adis *adis = &st->adis; - if (!st->info->has_burst32) + if (!(st->info->flags & ADIS16475_HAS_BURST32)) return; if (st->lsb_flag && !st->burst32) { @@ -1044,7 +1193,7 @@ static irqreturn_t adis16475_trigger_handler(int irq, void *p) struct iio_dev *indio_dev = pf->indio_dev; struct adis16475 *st = iio_priv(indio_dev); struct adis *adis = &st->adis; - int ret, bit, i = 0; + int ret, bit, buff_offset = 0, i = 0; __be16 *buffer; u16 crc; bool valid; @@ -1073,7 +1222,20 @@ static irqreturn_t adis16475_trigger_handler(int irq, void *p) switch (bit) { case ADIS16475_SCAN_TEMP: st->data[i++] = buffer[offset]; + /* + * The temperature channel has 16-bit storage size. + * We need to perform the padding to have the buffer + * elements naturally aligned in case there are any + * 32-bit storage size channels enabled which have a + * scan index higher than the temperature channel scan + * index. + */ + if (*indio_dev->active_scan_mask & GENMASK(ADIS16475_SCAN_DELTVEL_Z, ADIS16475_SCAN_DELTANG_X)) + st->data[i++] = 0; break; + case ADIS16475_SCAN_DELTANG_X ... ADIS16475_SCAN_DELTVEL_Z: + buff_offset = ADIS16475_SCAN_DELTANG_X; + fallthrough; case ADIS16475_SCAN_GYRO_X ... ADIS16475_SCAN_ACCEL_Z: /* * The first 2 bytes on the received data are the @@ -1081,18 +1243,18 @@ static irqreturn_t adis16475_trigger_handler(int irq, void *p) */ if (st->burst32) { /* upper 16 */ - st->data[i++] = buffer[bit * 2 + 2]; + st->data[i++] = buffer[(bit - buff_offset) * 2 + 2]; /* lower 16 */ - st->data[i++] = buffer[bit * 2 + 1]; + st->data[i++] = buffer[(bit - buff_offset) * 2 + 1]; } else { - st->data[i++] = buffer[bit + 1]; + st->data[i++] = buffer[(bit - buff_offset) + 1]; /* * Don't bother in doing the manual read if the * device supports burst32. burst32 will be * enabled in the next call to * adis16475_burst32_check()... */ - if (st->lsb_flag && !st->info->has_burst32) { + if (st->lsb_flag && !(st->info->flags & ADIS16475_HAS_BURST32)) { u16 val = 0; const u32 reg = ADIS16475_REG_X_GYRO_L + bit * 4; diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c index 7327e5723f96..8a7f2911905a 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c @@ -71,6 +71,19 @@ int inv_mpu_aux_init(const struct inv_mpu6050_state *st) unsigned int val; int ret; + /* + * Code based on the vendor Linux kernel v3.0, + * the exact meaning is unknown. + */ + if (st->chip_type == INV_MPU9150) { + unsigned int mask = BIT(7); + + val = st->level_shifter ? mask : 0; + ret = regmap_update_bits(st->map, 0x1, mask, val); + if (ret) + return ret; + } + /* configure i2c master */ val = INV_MPU6050_BITS_I2C_MST_CLK_400KHZ | INV_MPU6050_BIT_WAIT_FOR_ES; diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c index 29f906c884bd..3fbeef1a7018 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -17,6 +17,7 @@ #include <linux/regulator/consumer.h> #include <linux/pm.h> #include <linux/pm_runtime.h> +#include <linux/property.h> #include <linux/iio/common/inv_sensors_timestamp.h> #include <linux/iio/iio.h> @@ -1495,6 +1496,8 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name, st->irq = irq; st->map = regmap; + st->level_shifter = device_property_read_bool(dev, + "invensense,level-shifter"); pdata = dev_get_platdata(dev); if (!pdata) { result = iio_read_mount_matrix(dev, &st->orientation); diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h index ed5a96e78df0..5950e2419ebb 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h @@ -203,6 +203,7 @@ struct inv_mpu6050_state { s32 magn_raw_to_gauss[3]; struct iio_mount_matrix magn_orient; unsigned int suspended_sensors; + bool level_shifter; u8 *data; }; @@ -464,7 +465,6 @@ int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev, int irq_type); int inv_mpu6050_prepare_fifo(struct inv_mpu6050_state *st, bool enable); int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, unsigned int mask); -int inv_mpu6050_write_reg(struct inv_mpu6050_state *st, int reg, u8 val); int inv_mpu_acpi_create_mux_client(struct i2c_client *client); void inv_mpu_acpi_delete_mux_client(struct i2c_client *client); int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name, diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index d752e9c0499b..c77745b594bd 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -90,6 +90,10 @@ static const char * const iio_chan_type_name_spec[] = { [IIO_POSITIONRELATIVE] = "positionrelative", [IIO_PHASE] = "phase", [IIO_MASSCONCENTRATION] = "massconcentration", + [IIO_DELTA_ANGL] = "deltaangl", + [IIO_DELTA_VELOCITY] = "deltavelocity", + [IIO_COLORTEMP] = "colortemp", + [IIO_CHROMATICITY] = "chromaticity", }; static const char * const iio_modifier_names[] = { diff --git a/drivers/iio/industrialio-event.c b/drivers/iio/industrialio-event.c index 19f7a91157ee..910c1f14abd5 100644 --- a/drivers/iio/industrialio-event.c +++ b/drivers/iio/industrialio-event.c @@ -355,6 +355,21 @@ static ssize_t iio_ev_value_store(struct device *dev, return len; } +static ssize_t iio_ev_label_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); + + if (indio_dev->info->read_event_label) + return indio_dev->info->read_event_label(indio_dev, + this_attr->c, iio_ev_attr_type(this_attr), + iio_ev_attr_dir(this_attr), buf); + + return -EINVAL; +} + static int iio_device_add_event(struct iio_dev *indio_dev, const struct iio_chan_spec *chan, unsigned int spec_index, enum iio_event_type type, enum iio_event_direction dir, @@ -411,6 +426,41 @@ static int iio_device_add_event(struct iio_dev *indio_dev, return attrcount; } +static int iio_device_add_event_label(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + unsigned int spec_index, + enum iio_event_type type, + enum iio_event_direction dir) +{ + struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); + char *postfix; + int ret; + + if (!indio_dev->info->read_event_label) + return 0; + + if (dir != IIO_EV_DIR_NONE) + postfix = kasprintf(GFP_KERNEL, "%s_%s_label", + iio_ev_type_text[type], + iio_ev_dir_text[dir]); + else + postfix = kasprintf(GFP_KERNEL, "%s_label", + iio_ev_type_text[type]); + if (postfix == NULL) + return -ENOMEM; + + ret = __iio_add_chan_devattr(postfix, chan, &iio_ev_label_show, NULL, + spec_index, IIO_SEPARATE, &indio_dev->dev, NULL, + &iio_dev_opaque->event_interface->dev_attr_list); + + kfree(postfix); + + if (ret < 0) + return ret; + + return 1; +} + static int iio_device_add_event_sysfs(struct iio_dev *indio_dev, struct iio_chan_spec const *chan) { @@ -448,6 +498,11 @@ static int iio_device_add_event_sysfs(struct iio_dev *indio_dev, if (ret < 0) return ret; attrcount += ret; + + ret = iio_device_add_event_label(indio_dev, chan, i, type, dir); + if (ret < 0) + return ret; + attrcount += ret; } ret = attrcount; return ret; diff --git a/drivers/iio/light/cm3605.c b/drivers/iio/light/cm3605.c index e7f0b81b7f5a..22a63a89f289 100644 --- a/drivers/iio/light/cm3605.c +++ b/drivers/iio/light/cm3605.c @@ -266,7 +266,7 @@ out_disable_vdd: return ret; } -static int cm3605_remove(struct platform_device *pdev) +static void cm3605_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct cm3605 *cm3605 = iio_priv(indio_dev); @@ -276,8 +276,6 @@ static int cm3605_remove(struct platform_device *pdev) gpiod_set_value_cansleep(cm3605->aset, 0); iio_device_unregister(indio_dev); regulator_disable(cm3605->vdd); - - return 0; } static int cm3605_pm_suspend(struct device *dev) @@ -320,7 +318,7 @@ static struct platform_driver cm3605_driver = { .pm = pm_sleep_ptr(&cm3605_dev_pm_ops), }, .probe = cm3605_probe, - .remove = cm3605_remove, + .remove_new = cm3605_remove, }; module_platform_driver(cm3605_driver); diff --git a/drivers/iio/light/hid-sensor-als.c b/drivers/iio/light/hid-sensor-als.c index eb1aedad7edc..f17304b54468 100644 --- a/drivers/iio/light/hid-sensor-als.c +++ b/drivers/iio/light/hid-sensor-als.c @@ -14,8 +14,11 @@ #include "../common/hid-sensors/hid-sensor-trigger.h" enum { - CHANNEL_SCAN_INDEX_INTENSITY = 0, - CHANNEL_SCAN_INDEX_ILLUM = 1, + CHANNEL_SCAN_INDEX_INTENSITY, + CHANNEL_SCAN_INDEX_ILLUM, + CHANNEL_SCAN_INDEX_COLOR_TEMP, + CHANNEL_SCAN_INDEX_CHROMATICITY_X, + CHANNEL_SCAN_INDEX_CHROMATICITY_Y, CHANNEL_SCAN_INDEX_MAX }; @@ -24,7 +27,7 @@ enum { struct als_state { struct hid_sensor_hub_callbacks callbacks; struct hid_sensor_common common_attributes; - struct hid_sensor_hub_attribute_info als_illum; + struct hid_sensor_hub_attribute_info als[CHANNEL_SCAN_INDEX_MAX]; struct { u32 illum[CHANNEL_SCAN_INDEX_MAX]; u64 timestamp __aligned(8); @@ -65,6 +68,40 @@ static const struct iio_chan_spec als_channels[] = { BIT(IIO_CHAN_INFO_HYSTERESIS_RELATIVE), .scan_index = CHANNEL_SCAN_INDEX_ILLUM, }, + { + .type = IIO_COLORTEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_HYSTERESIS) | + BIT(IIO_CHAN_INFO_HYSTERESIS_RELATIVE), + .scan_index = CHANNEL_SCAN_INDEX_COLOR_TEMP, + }, + { + .type = IIO_CHROMATICITY, + .modified = 1, + .channel2 = IIO_MOD_X, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_HYSTERESIS) | + BIT(IIO_CHAN_INFO_HYSTERESIS_RELATIVE), + .scan_index = CHANNEL_SCAN_INDEX_CHROMATICITY_X, + }, + { + .type = IIO_CHROMATICITY, + .modified = 1, + .channel2 = IIO_MOD_Y, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_HYSTERESIS) | + BIT(IIO_CHAN_INFO_HYSTERESIS_RELATIVE), + .scan_index = CHANNEL_SCAN_INDEX_CHROMATICITY_Y, + }, IIO_CHAN_SOFT_TIMESTAMP(CHANNEL_SCAN_INDEX_TIMESTAMP) }; @@ -99,10 +136,25 @@ static int als_read_raw(struct iio_dev *indio_dev, switch (chan->scan_index) { case CHANNEL_SCAN_INDEX_INTENSITY: case CHANNEL_SCAN_INDEX_ILLUM: - report_id = als_state->als_illum.report_id; - min = als_state->als_illum.logical_minimum; + report_id = als_state->als[chan->scan_index].report_id; + min = als_state->als[chan->scan_index].logical_minimum; address = HID_USAGE_SENSOR_LIGHT_ILLUM; break; + case CHANNEL_SCAN_INDEX_COLOR_TEMP: + report_id = als_state->als[chan->scan_index].report_id; + min = als_state->als[chan->scan_index].logical_minimum; + address = HID_USAGE_SENSOR_LIGHT_COLOR_TEMPERATURE; + break; + case CHANNEL_SCAN_INDEX_CHROMATICITY_X: + report_id = als_state->als[chan->scan_index].report_id; + min = als_state->als[chan->scan_index].logical_minimum; + address = HID_USAGE_SENSOR_LIGHT_CHROMATICITY_X; + break; + case CHANNEL_SCAN_INDEX_CHROMATICITY_Y: + report_id = als_state->als[chan->scan_index].report_id; + min = als_state->als[chan->scan_index].logical_minimum; + address = HID_USAGE_SENSOR_LIGHT_CHROMATICITY_Y; + break; default: report_id = -1; break; @@ -223,6 +275,18 @@ static int als_capture_sample(struct hid_sensor_hub_device *hsdev, als_state->scan.illum[CHANNEL_SCAN_INDEX_ILLUM] = sample_data; ret = 0; break; + case HID_USAGE_SENSOR_LIGHT_COLOR_TEMPERATURE: + als_state->scan.illum[CHANNEL_SCAN_INDEX_COLOR_TEMP] = sample_data; + ret = 0; + break; + case HID_USAGE_SENSOR_LIGHT_CHROMATICITY_X: + als_state->scan.illum[CHANNEL_SCAN_INDEX_CHROMATICITY_X] = sample_data; + ret = 0; + break; + case HID_USAGE_SENSOR_LIGHT_CHROMATICITY_Y: + als_state->scan.illum[CHANNEL_SCAN_INDEX_CHROMATICITY_Y] = sample_data; + ret = 0; + break; case HID_USAGE_SENSOR_TIME_TIMESTAMP: als_state->timestamp = hid_sensor_convert_timestamp(&als_state->common_attributes, *(s64 *)raw_data); @@ -242,22 +306,56 @@ static int als_parse_report(struct platform_device *pdev, struct als_state *st) { int ret; + int i; + + for (i = 0; i <= CHANNEL_SCAN_INDEX_ILLUM; ++i) { + ret = sensor_hub_input_get_attribute_info(hsdev, + HID_INPUT_REPORT, + usage_id, + HID_USAGE_SENSOR_LIGHT_ILLUM, + &st->als[i]); + if (ret < 0) + return ret; + als_adjust_channel_bit_mask(channels, i, st->als[i].size); + + dev_dbg(&pdev->dev, "als %x:%x\n", st->als[i].index, + st->als[i].report_id); + } ret = sensor_hub_input_get_attribute_info(hsdev, HID_INPUT_REPORT, - usage_id, - HID_USAGE_SENSOR_LIGHT_ILLUM, - &st->als_illum); + usage_id, + HID_USAGE_SENSOR_LIGHT_COLOR_TEMPERATURE, + &st->als[CHANNEL_SCAN_INDEX_COLOR_TEMP]); if (ret < 0) return ret; - als_adjust_channel_bit_mask(channels, CHANNEL_SCAN_INDEX_INTENSITY, - st->als_illum.size); - als_adjust_channel_bit_mask(channels, CHANNEL_SCAN_INDEX_ILLUM, - st->als_illum.size); - - dev_dbg(&pdev->dev, "als %x:%x\n", st->als_illum.index, - st->als_illum.report_id); + als_adjust_channel_bit_mask(channels, CHANNEL_SCAN_INDEX_COLOR_TEMP, + st->als[CHANNEL_SCAN_INDEX_COLOR_TEMP].size); + + dev_dbg(&pdev->dev, "als %x:%x\n", + st->als[CHANNEL_SCAN_INDEX_COLOR_TEMP].index, + st->als[CHANNEL_SCAN_INDEX_COLOR_TEMP].report_id); + + for (i = 0; i < 2; i++) { + int next_scan_index = CHANNEL_SCAN_INDEX_CHROMATICITY_X + i; + + ret = sensor_hub_input_get_attribute_info(hsdev, + HID_INPUT_REPORT, usage_id, + HID_USAGE_SENSOR_LIGHT_CHROMATICITY_X + i, + &st->als[next_scan_index]); + if (ret < 0) + return ret; + + als_adjust_channel_bit_mask(channels, + CHANNEL_SCAN_INDEX_CHROMATICITY_X + i, + st->als[next_scan_index].size); + + dev_dbg(&pdev->dev, "als %x:%x\n", + st->als[next_scan_index].index, + st->als[next_scan_index].report_id); + } - st->scale_precision = hid_sensor_format_scale(usage_id, &st->als_illum, + st->scale_precision = hid_sensor_format_scale(usage_id, + &st->als[CHANNEL_SCAN_INDEX_INTENSITY], &st->scale_pre_decml, &st->scale_post_decml); return ret; @@ -347,7 +445,7 @@ error_remove_trigger: } /* Function to deinitialize the processing for usage id */ -static int hid_als_remove(struct platform_device *pdev) +static void hid_als_remove(struct platform_device *pdev) { struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; struct iio_dev *indio_dev = platform_get_drvdata(pdev); @@ -356,8 +454,6 @@ static int hid_als_remove(struct platform_device *pdev) sensor_hub_remove_callback(hsdev, hsdev->usage); iio_device_unregister(indio_dev); hid_sensor_remove_trigger(indio_dev, &als_state->common_attributes); - - return 0; } static const struct platform_device_id hid_als_ids[] = { @@ -380,7 +476,7 @@ static struct platform_driver hid_als_platform_driver = { .pm = &hid_sensor_pm_ops, }, .probe = hid_als_probe, - .remove = hid_als_remove, + .remove_new = hid_als_remove, }; module_platform_driver(hid_als_platform_driver); diff --git a/drivers/iio/light/hid-sensor-prox.c b/drivers/iio/light/hid-sensor-prox.c index a47591e1bad9..26c481d2998c 100644 --- a/drivers/iio/light/hid-sensor-prox.c +++ b/drivers/iio/light/hid-sensor-prox.c @@ -313,7 +313,7 @@ error_remove_trigger: } /* Function to deinitialize the processing for usage id */ -static int hid_prox_remove(struct platform_device *pdev) +static void hid_prox_remove(struct platform_device *pdev) { struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; struct iio_dev *indio_dev = platform_get_drvdata(pdev); @@ -322,8 +322,6 @@ static int hid_prox_remove(struct platform_device *pdev) sensor_hub_remove_callback(hsdev, hsdev->usage); iio_device_unregister(indio_dev); hid_sensor_remove_trigger(indio_dev, &prox_state->common_attributes); - - return 0; } static const struct platform_device_id hid_prox_ids[] = { @@ -346,7 +344,7 @@ static struct platform_driver hid_prox_platform_driver = { .pm = &hid_sensor_pm_ops, }, .probe = hid_prox_probe, - .remove = hid_prox_remove, + .remove_new = hid_prox_remove, }; module_platform_driver(hid_prox_platform_driver); diff --git a/drivers/iio/light/lm3533-als.c b/drivers/iio/light/lm3533-als.c index 827bc25269e9..7800f7fa51b7 100644 --- a/drivers/iio/light/lm3533-als.c +++ b/drivers/iio/light/lm3533-als.c @@ -895,7 +895,7 @@ err_free_irq: return ret; } -static int lm3533_als_remove(struct platform_device *pdev) +static void lm3533_als_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct lm3533_als *als = iio_priv(indio_dev); @@ -905,8 +905,6 @@ static int lm3533_als_remove(struct platform_device *pdev) lm3533_als_disable(als); if (als->irq) free_irq(als->irq, indio_dev); - - return 0; } static struct platform_driver lm3533_als_driver = { @@ -914,7 +912,7 @@ static struct platform_driver lm3533_als_driver = { .name = "lm3533-als", }, .probe = lm3533_als_probe, - .remove = lm3533_als_remove, + .remove_new = lm3533_als_remove, }; module_platform_driver(lm3533_als_driver); diff --git a/drivers/iio/light/opt4001.c b/drivers/iio/light/opt4001.c index 502946bf9f94..6cf60151b3d8 100644 --- a/drivers/iio/light/opt4001.c +++ b/drivers/iio/light/opt4001.c @@ -412,7 +412,7 @@ static int opt4001_probe(struct i2c_client *client) if (dev_id != OPT4001_DEVICE_ID_VAL) dev_warn(&client->dev, "Device ID: %#04x unknown\n", dev_id); - chip->chip_info = device_get_match_data(&client->dev); + chip->chip_info = i2c_get_match_data(client); indio_dev->channels = opt4001_channels; indio_dev->num_channels = ARRAY_SIZE(opt4001_channels); diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c index eb706d0bf70b..dd466c5fa621 100644 --- a/drivers/iio/magnetometer/ak8975.c +++ b/drivers/iio/magnetometer/ak8975.c @@ -204,7 +204,6 @@ static long ak09912_raw_to_gauss(u16 data) /* Compatible Asahi Kasei Compass parts */ enum asahi_compass_chipset { - AKXXXX = 0, AK8975, AK8963, AK09911, @@ -248,7 +247,7 @@ struct ak_def { }; static const struct ak_def ak_def_array[] = { - { + [AK8975] = { .type = AK8975, .raw_to_gauss = ak8975_raw_to_gauss, .range = 4096, @@ -273,7 +272,7 @@ static const struct ak_def ak_def_array[] = { AK8975_REG_HYL, AK8975_REG_HZL}, }, - { + [AK8963] = { .type = AK8963, .raw_to_gauss = ak8963_09911_raw_to_gauss, .range = 8190, @@ -298,7 +297,7 @@ static const struct ak_def ak_def_array[] = { AK8975_REG_HYL, AK8975_REG_HZL}, }, - { + [AK09911] = { .type = AK09911, .raw_to_gauss = ak8963_09911_raw_to_gauss, .range = 8192, @@ -323,7 +322,7 @@ static const struct ak_def ak_def_array[] = { AK09912_REG_HYL, AK09912_REG_HZL}, }, - { + [AK09912] = { .type = AK09912, .raw_to_gauss = ak09912_raw_to_gauss, .range = 32752, @@ -348,7 +347,7 @@ static const struct ak_def ak_def_array[] = { AK09912_REG_HYL, AK09912_REG_HZL}, }, - { + [AK09916] = { .type = AK09916, .raw_to_gauss = ak09912_raw_to_gauss, .range = 32752, @@ -812,18 +811,6 @@ static const struct iio_info ak8975_info = { .read_raw = &ak8975_read_raw, }; -static const struct acpi_device_id ak_acpi_match[] = { - {"AK8975", AK8975}, - {"AK8963", AK8963}, - {"INVN6500", AK8963}, - {"AK009911", AK09911}, - {"AK09911", AK09911}, - {"AKM9911", AK09911}, - {"AK09912", AK09912}, - { } -}; -MODULE_DEVICE_TABLE(acpi, ak_acpi_match); - static void ak8975_fill_buffer(struct iio_dev *indio_dev) { struct ak8975_data *data = iio_priv(indio_dev); @@ -883,10 +870,7 @@ static int ak8975_probe(struct i2c_client *client) struct iio_dev *indio_dev; struct gpio_desc *eoc_gpiod; struct gpio_desc *reset_gpiod; - const void *match; - unsigned int i; int err; - enum asahi_compass_chipset chipset; const char *name = NULL; /* @@ -928,27 +912,15 @@ static int ak8975_probe(struct i2c_client *client) return err; /* id will be NULL when enumerated via ACPI */ - match = device_get_match_data(&client->dev); - if (match) { - chipset = (uintptr_t)match; - name = dev_name(&client->dev); - } else if (id) { - chipset = (enum asahi_compass_chipset)(id->driver_data); - name = id->name; - } else - return -ENOSYS; - - for (i = 0; i < ARRAY_SIZE(ak_def_array); i++) - if (ak_def_array[i].type == chipset) - break; - - if (i == ARRAY_SIZE(ak_def_array)) { - dev_err(&client->dev, "AKM device type unsupported: %d\n", - chipset); + data->def = i2c_get_match_data(client); + if (!data->def) return -ENODEV; - } - data->def = &ak_def_array[i]; + /* If enumerated via firmware node, fix the ABI */ + if (dev_fwnode(&client->dev)) + name = dev_name(&client->dev); + else + name = id->name; /* Fetch the regulators */ data->vdd = devm_regulator_get(&client->dev, "vdd"); @@ -1076,29 +1048,40 @@ static int ak8975_runtime_resume(struct device *dev) static DEFINE_RUNTIME_DEV_PM_OPS(ak8975_dev_pm_ops, ak8975_runtime_suspend, ak8975_runtime_resume, NULL); +static const struct acpi_device_id ak_acpi_match[] = { + {"AK8963", (kernel_ulong_t)&ak_def_array[AK8963] }, + {"AK8975", (kernel_ulong_t)&ak_def_array[AK8975] }, + {"AK009911", (kernel_ulong_t)&ak_def_array[AK09911] }, + {"AK09911", (kernel_ulong_t)&ak_def_array[AK09911] }, + {"AK09912", (kernel_ulong_t)&ak_def_array[AK09912] }, + {"AKM9911", (kernel_ulong_t)&ak_def_array[AK09911] }, + {"INVN6500", (kernel_ulong_t)&ak_def_array[AK8963] }, + { } +}; +MODULE_DEVICE_TABLE(acpi, ak_acpi_match); + static const struct i2c_device_id ak8975_id[] = { - {"ak8975", AK8975}, - {"ak8963", AK8963}, - {"AK8963", AK8963}, - {"ak09911", AK09911}, - {"ak09912", AK09912}, - {"ak09916", AK09916}, + {"AK8963", (kernel_ulong_t)&ak_def_array[AK8963] }, + {"ak8963", (kernel_ulong_t)&ak_def_array[AK8963] }, + {"ak8975", (kernel_ulong_t)&ak_def_array[AK8975] }, + {"ak09911", (kernel_ulong_t)&ak_def_array[AK09911] }, + {"ak09912", (kernel_ulong_t)&ak_def_array[AK09912] }, + {"ak09916", (kernel_ulong_t)&ak_def_array[AK09916] }, {} }; - MODULE_DEVICE_TABLE(i2c, ak8975_id); static const struct of_device_id ak8975_of_match[] = { - { .compatible = "asahi-kasei,ak8975", }, - { .compatible = "ak8975", }, - { .compatible = "asahi-kasei,ak8963", }, - { .compatible = "ak8963", }, - { .compatible = "asahi-kasei,ak09911", }, - { .compatible = "ak09911", }, - { .compatible = "asahi-kasei,ak09912", }, - { .compatible = "ak09912", }, - { .compatible = "asahi-kasei,ak09916", }, - { .compatible = "ak09916", }, + { .compatible = "asahi-kasei,ak8975", .data = &ak_def_array[AK8975] }, + { .compatible = "ak8975", .data = &ak_def_array[AK8975] }, + { .compatible = "asahi-kasei,ak8963", .data = &ak_def_array[AK8963] }, + { .compatible = "ak8963", .data = &ak_def_array[AK8963] }, + { .compatible = "asahi-kasei,ak09911", .data = &ak_def_array[AK09911] }, + { .compatible = "ak09911", .data = &ak_def_array[AK09911] }, + { .compatible = "asahi-kasei,ak09912", .data = &ak_def_array[AK09912] }, + { .compatible = "ak09912", .data = &ak_def_array[AK09912] }, + { .compatible = "asahi-kasei,ak09916", .data = &ak_def_array[AK09916] }, + { .compatible = "ak09916", .data = &ak_def_array[AK09916] }, {} }; MODULE_DEVICE_TABLE(of, ak8975_of_match); diff --git a/drivers/iio/magnetometer/hid-sensor-magn-3d.c b/drivers/iio/magnetometer/hid-sensor-magn-3d.c index e85a3a8eea90..5c795a430d09 100644 --- a/drivers/iio/magnetometer/hid-sensor-magn-3d.c +++ b/drivers/iio/magnetometer/hid-sensor-magn-3d.c @@ -547,7 +547,7 @@ error_remove_trigger: } /* Function to deinitialize the processing for usage id */ -static int hid_magn_3d_remove(struct platform_device *pdev) +static void hid_magn_3d_remove(struct platform_device *pdev) { struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; struct iio_dev *indio_dev = platform_get_drvdata(pdev); @@ -556,8 +556,6 @@ static int hid_magn_3d_remove(struct platform_device *pdev) sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_COMPASS_3D); iio_device_unregister(indio_dev); hid_sensor_remove_trigger(indio_dev, &magn_state->magn_flux_attributes); - - return 0; } static const struct platform_device_id hid_magn_3d_ids[] = { @@ -576,7 +574,7 @@ static struct platform_driver hid_magn_3d_platform_driver = { .pm = &hid_sensor_pm_ops, }, .probe = hid_magn_3d_probe, - .remove = hid_magn_3d_remove, + .remove_new = hid_magn_3d_remove, }; module_platform_driver(hid_magn_3d_platform_driver); diff --git a/drivers/iio/magnetometer/yamaha-yas530.c b/drivers/iio/magnetometer/yamaha-yas530.c index c5e485bfc6fc..7b041bb38693 100644 --- a/drivers/iio/magnetometer/yamaha-yas530.c +++ b/drivers/iio/magnetometer/yamaha-yas530.c @@ -1434,9 +1434,7 @@ static int yas5xx_probe(struct i2c_client *i2c) goto assert_reset; } - ci = device_get_match_data(dev); - if (!ci) - ci = (const struct yas5xx_chip_info *)id->driver_data; + ci = i2c_get_match_data(i2c); yas5xx->chip_info = ci; ret = regmap_read(yas5xx->map, YAS5XX_DEVICE_ID, &id_check); diff --git a/drivers/iio/orientation/hid-sensor-incl-3d.c b/drivers/iio/orientation/hid-sensor-incl-3d.c index ba5b581d5b25..8943d5c78bc0 100644 --- a/drivers/iio/orientation/hid-sensor-incl-3d.c +++ b/drivers/iio/orientation/hid-sensor-incl-3d.c @@ -383,7 +383,7 @@ error_remove_trigger: } /* Function to deinitialize the processing for usage id */ -static int hid_incl_3d_remove(struct platform_device *pdev) +static void hid_incl_3d_remove(struct platform_device *pdev) { struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; struct iio_dev *indio_dev = platform_get_drvdata(pdev); @@ -392,8 +392,6 @@ static int hid_incl_3d_remove(struct platform_device *pdev) sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_INCLINOMETER_3D); iio_device_unregister(indio_dev); hid_sensor_remove_trigger(indio_dev, &incl_state->common_attributes); - - return 0; } static const struct platform_device_id hid_incl_3d_ids[] = { @@ -412,7 +410,7 @@ static struct platform_driver hid_incl_3d_platform_driver = { .pm = &hid_sensor_pm_ops, }, .probe = hid_incl_3d_probe, - .remove = hid_incl_3d_remove, + .remove_new = hid_incl_3d_remove, }; module_platform_driver(hid_incl_3d_platform_driver); diff --git a/drivers/iio/orientation/hid-sensor-rotation.c b/drivers/iio/orientation/hid-sensor-rotation.c index a033699910e8..5e8cadd5177a 100644 --- a/drivers/iio/orientation/hid-sensor-rotation.c +++ b/drivers/iio/orientation/hid-sensor-rotation.c @@ -327,7 +327,7 @@ error_remove_trigger: } /* Function to deinitialize the processing for usage id */ -static int hid_dev_rot_remove(struct platform_device *pdev) +static void hid_dev_rot_remove(struct platform_device *pdev) { struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; struct iio_dev *indio_dev = platform_get_drvdata(pdev); @@ -336,8 +336,6 @@ static int hid_dev_rot_remove(struct platform_device *pdev) sensor_hub_remove_callback(hsdev, hsdev->usage); iio_device_unregister(indio_dev); hid_sensor_remove_trigger(indio_dev, &rot_state->common_attributes); - - return 0; } static const struct platform_device_id hid_dev_rot_ids[] = { @@ -364,7 +362,7 @@ static struct platform_driver hid_dev_rot_platform_driver = { .pm = &hid_sensor_pm_ops, }, .probe = hid_dev_rot_probe, - .remove = hid_dev_rot_remove, + .remove_new = hid_dev_rot_remove, }; module_platform_driver(hid_dev_rot_platform_driver); diff --git a/drivers/iio/position/hid-sensor-custom-intel-hinge.c b/drivers/iio/position/hid-sensor-custom-intel-hinge.c index 07c30d217255..76e173850a35 100644 --- a/drivers/iio/position/hid-sensor-custom-intel-hinge.c +++ b/drivers/iio/position/hid-sensor-custom-intel-hinge.c @@ -342,7 +342,7 @@ error_remove_trigger: } /* Function to deinitialize the processing for usage id */ -static int hid_hinge_remove(struct platform_device *pdev) +static void hid_hinge_remove(struct platform_device *pdev) { struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; struct iio_dev *indio_dev = platform_get_drvdata(pdev); @@ -351,8 +351,6 @@ static int hid_hinge_remove(struct platform_device *pdev) iio_device_unregister(indio_dev); sensor_hub_remove_callback(hsdev, hsdev->usage); hid_sensor_remove_trigger(indio_dev, &st->common_attributes); - - return 0; } static const struct platform_device_id hid_hinge_ids[] = { @@ -371,7 +369,7 @@ static struct platform_driver hid_hinge_platform_driver = { .pm = &hid_sensor_pm_ops, }, .probe = hid_hinge_probe, - .remove = hid_hinge_remove, + .remove_new = hid_hinge_remove, }; module_platform_driver(hid_hinge_platform_driver); diff --git a/drivers/iio/potentiometer/ad5110.c b/drivers/iio/potentiometer/ad5110.c index 991e745c4f93..aaf02cc7aeba 100644 --- a/drivers/iio/potentiometer/ad5110.c +++ b/drivers/iio/potentiometer/ad5110.c @@ -278,14 +278,19 @@ static const struct of_device_id ad5110_of_match[] = { }; MODULE_DEVICE_TABLE(of, ad5110_of_match); +#define AD5110_ID_TABLE(_name, cfg) { \ + .name = _name, \ + .driver_data = (kernel_ulong_t)&ad5110_cfg[cfg], \ +} + static const struct i2c_device_id ad5110_id[] = { - { "ad5110-10", AD5110_10 }, - { "ad5110-80", AD5110_80 }, - { "ad5112-05", AD5112_05 }, - { "ad5112-10", AD5112_10 }, - { "ad5112-80", AD5112_80 }, - { "ad5114-10", AD5114_10 }, - { "ad5114-80", AD5114_80 }, + AD5110_ID_TABLE("ad5110-10", AD5110_10), + AD5110_ID_TABLE("ad5110-80", AD5110_80), + AD5110_ID_TABLE("ad5112-05", AD5112_05), + AD5110_ID_TABLE("ad5112-10", AD5112_10), + AD5110_ID_TABLE("ad5112-80", AD5112_80), + AD5110_ID_TABLE("ad5114-10", AD5114_10), + AD5110_ID_TABLE("ad5114-80", AD5114_80), { } }; MODULE_DEVICE_TABLE(i2c, ad5110_id); @@ -305,7 +310,7 @@ static int ad5110_probe(struct i2c_client *client) data->client = client; mutex_init(&data->lock); data->enable = 1; - data->cfg = device_get_match_data(dev); + data->cfg = i2c_get_match_data(client); /* refresh RDAC register with EEPROM */ ret = ad5110_write(data, AD5110_RESET, 0); diff --git a/drivers/iio/potentiometer/ds1803.c b/drivers/iio/potentiometer/ds1803.c index fc183e0790da..e0526dd0e3cb 100644 --- a/drivers/iio/potentiometer/ds1803.c +++ b/drivers/iio/potentiometer/ds1803.c @@ -204,7 +204,6 @@ static const struct iio_info ds1803_info = { static int ds1803_probe(struct i2c_client *client) { - const struct i2c_device_id *id = i2c_client_get_device_id(client); struct device *dev = &client->dev; struct ds1803_data *data; struct iio_dev *indio_dev; @@ -217,9 +216,7 @@ static int ds1803_probe(struct i2c_client *client) data = iio_priv(indio_dev); data->client = client; - data->cfg = device_get_match_data(dev); - if (!data->cfg) - data->cfg = &ds1803_cfg[id->driver_data]; + data->cfg = i2c_get_match_data(client); indio_dev->info = &ds1803_info; indio_dev->channels = data->cfg->channels; @@ -239,10 +236,10 @@ static const struct of_device_id ds1803_dt_ids[] = { MODULE_DEVICE_TABLE(of, ds1803_dt_ids); static const struct i2c_device_id ds1803_id[] = { - { "ds1803-010", DS1803_010 }, - { "ds1803-050", DS1803_050 }, - { "ds1803-100", DS1803_100 }, - { "ds3502", DS3502 }, + { "ds1803-010", (kernel_ulong_t)&ds1803_cfg[DS1803_010] }, + { "ds1803-050", (kernel_ulong_t)&ds1803_cfg[DS1803_050] }, + { "ds1803-100", (kernel_ulong_t)&ds1803_cfg[DS1803_100] }, + { "ds3502", (kernel_ulong_t)&ds1803_cfg[DS3502] }, {} }; MODULE_DEVICE_TABLE(i2c, ds1803_id); diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig index 7b4c2af32852..95efa32e4289 100644 --- a/drivers/iio/pressure/Kconfig +++ b/drivers/iio/pressure/Kconfig @@ -16,6 +16,15 @@ config ABP060MG To compile this driver as a module, choose M here: the module will be called abp060mg. +config ROHM_BM1390 + tristate "ROHM BM1390GLV-Z pressure sensor driver" + depends on I2C + help + Support for the ROHM BM1390 pressure sensor. The BM1390GLV-Z + can measure pressures ranging from 300 hPa to 1300 hPa with + configurable measurement averaging and internal FIFO. The + sensor does also provide temperature measurements. + config BMP280 tristate "Bosch Sensortec BMP180/BMP280/BMP380/BMP580 pressure sensor driver" depends on (I2C || SPI_MASTER) diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile index c90f77210e94..436aec7e65f3 100644 --- a/drivers/iio/pressure/Makefile +++ b/drivers/iio/pressure/Makefile @@ -5,6 +5,7 @@ # When adding new entries keep the list in alphabetical order obj-$(CONFIG_ABP060MG) += abp060mg.o +obj-$(CONFIG_ROHM_BM1390) += rohm-bm1390.o obj-$(CONFIG_BMP280) += bmp280.o bmp280-objs := bmp280-core.o bmp280-regmap.o obj-$(CONFIG_BMP280_I2C) += bmp280-i2c.o diff --git a/drivers/iio/pressure/hid-sensor-press.c b/drivers/iio/pressure/hid-sensor-press.c index a9215eb32d70..956045e2db29 100644 --- a/drivers/iio/pressure/hid-sensor-press.c +++ b/drivers/iio/pressure/hid-sensor-press.c @@ -323,7 +323,7 @@ error_remove_trigger: } /* Function to deinitialize the processing for usage id */ -static int hid_press_remove(struct platform_device *pdev) +static void hid_press_remove(struct platform_device *pdev) { struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; struct iio_dev *indio_dev = platform_get_drvdata(pdev); @@ -332,8 +332,6 @@ static int hid_press_remove(struct platform_device *pdev) sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_PRESSURE); iio_device_unregister(indio_dev); hid_sensor_remove_trigger(indio_dev, &press_state->common_attributes); - - return 0; } static const struct platform_device_id hid_press_ids[] = { @@ -352,7 +350,7 @@ static struct platform_driver hid_press_platform_driver = { .pm = &hid_sensor_pm_ops, }, .probe = hid_press_probe, - .remove = hid_press_remove, + .remove_new = hid_press_remove, }; module_platform_driver(hid_press_platform_driver); diff --git a/drivers/iio/pressure/ms5637.c b/drivers/iio/pressure/ms5637.c index 9b3abffb724b..ac30d76285d1 100644 --- a/drivers/iio/pressure/ms5637.c +++ b/drivers/iio/pressure/ms5637.c @@ -144,7 +144,6 @@ static const struct iio_info ms5637_info = { static int ms5637_probe(struct i2c_client *client) { - const struct i2c_device_id *id = i2c_client_get_device_id(client); const struct ms_tp_data *data; struct ms_tp_dev *dev_data; struct iio_dev *indio_dev; @@ -159,10 +158,7 @@ static int ms5637_probe(struct i2c_client *client) return -EOPNOTSUPP; } - if (id) - data = (const struct ms_tp_data *)id->driver_data; - else - data = device_get_match_data(&client->dev); + data = i2c_get_match_data(client); if (!data) return -EINVAL; diff --git a/drivers/iio/pressure/rohm-bm1390.c b/drivers/iio/pressure/rohm-bm1390.c new file mode 100644 index 000000000000..ccaa07a569c9 --- /dev/null +++ b/drivers/iio/pressure/rohm-bm1390.c @@ -0,0 +1,934 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * BM1390 ROHM pressure sensor + * + * Copyright (c) 2023, ROHM Semiconductor. + * https://fscdn.rohm.com/en/products/databook/datasheet/ic/sensor/pressure/bm1390glv-z-e.pdf + */ + +#include <linux/bitfield.h> +#include <linux/bits.h> +#include <linux/device.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> + +#include <linux/iio/iio.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> + +#define BM1390_REG_MANUFACT_ID 0x0f +#define BM1390_REG_PART_ID 0x10 +#define BM1390_REG_POWER 0x12 +#define BM1390_MASK_POWER BIT(0) +#define BM1390_POWER_ON BM1390_MASK_POWER +#define BM1390_POWER_OFF 0x00 +#define BM1390_REG_RESET 0x13 +#define BM1390_MASK_RESET BIT(0) +#define BM1390_RESET_RELEASE BM1390_MASK_RESET +#define BM1390_RESET 0x00 +#define BM1390_REG_MODE_CTRL 0x14 +#define BM1390_MASK_MEAS_MODE GENMASK(1, 0) +#define BM1390_MASK_DRDY_EN BIT(4) +#define BM1390_MASK_WMI_EN BIT(2) +#define BM1390_MASK_AVE_NUM GENMASK(7, 5) + +/* + * Data-sheet states that when the IIR is used, the AVE_NUM must be set to + * value 110b + */ +#define BM1390_IIR_AVE_NUM 0x06 +#define BM1390_REG_FIFO_CTRL 0x15 +#define BM1390_MASK_IIR_MODE GENMASK(1, 0) +#define BM1390_IIR_MODE_OFF 0x0 +#define BM1390_IIR_MODE_WEAK 0x1 +#define BM1390_IIR_MODE_MID 0x2 +#define BM1390_IIR_MODE_STRONG 0x3 + +#define BM1390_MASK_FIFO_LEN BIT(6) +#define BM1390_MASK_FIFO_EN BIT(7) +#define BM1390_WMI_MIN 2 +#define BM1390_WMI_MAX 3 + +#define BM1390_REG_FIFO_LVL 0x18 +#define BM1390_MASK_FIFO_LVL GENMASK(2, 0) +#define BM1390_REG_STATUS 0x19 +#define BM1390_REG_PRESSURE_BASE 0x1a +#define BM1390_REG_TEMP_HI 0x1d +#define BM1390_REG_TEMP_LO 0x1e +#define BM1390_MAX_REGISTER BM1390_REG_TEMP_LO + +#define BM1390_ID 0x34 + +/* Regmap configs */ +static const struct regmap_range bm1390_volatile_ranges[] = { + { + .range_min = BM1390_REG_STATUS, + .range_max = BM1390_REG_STATUS, + }, + { + .range_min = BM1390_REG_FIFO_LVL, + .range_max = BM1390_REG_TEMP_LO, + }, +}; + +static const struct regmap_access_table bm1390_volatile_regs = { + .yes_ranges = &bm1390_volatile_ranges[0], + .n_yes_ranges = ARRAY_SIZE(bm1390_volatile_ranges), +}; + +static const struct regmap_range bm1390_precious_ranges[] = { + { + .range_min = BM1390_REG_STATUS, + .range_max = BM1390_REG_STATUS, + }, +}; + +static const struct regmap_access_table bm1390_precious_regs = { + .yes_ranges = &bm1390_precious_ranges[0], + .n_yes_ranges = ARRAY_SIZE(bm1390_precious_ranges), +}; + +static const struct regmap_range bm1390_read_only_ranges[] = { + { + .range_min = BM1390_REG_MANUFACT_ID, + .range_max = BM1390_REG_PART_ID, + }, { + .range_min = BM1390_REG_FIFO_LVL, + .range_max = BM1390_REG_TEMP_LO, + }, +}; + +static const struct regmap_access_table bm1390_ro_regs = { + .no_ranges = &bm1390_read_only_ranges[0], + .n_no_ranges = ARRAY_SIZE(bm1390_read_only_ranges), +}; + +static const struct regmap_range bm1390_noinc_read_ranges[] = { + { + .range_min = BM1390_REG_PRESSURE_BASE, + .range_max = BM1390_REG_TEMP_LO, + }, +}; + +static const struct regmap_access_table bm1390_nir_regs = { + .yes_ranges = &bm1390_noinc_read_ranges[0], + .n_yes_ranges = ARRAY_SIZE(bm1390_noinc_read_ranges), +}; + +static const struct regmap_config bm1390_regmap = { + .reg_bits = 8, + .val_bits = 8, + .volatile_table = &bm1390_volatile_regs, + .wr_table = &bm1390_ro_regs, + .rd_noinc_table = &bm1390_nir_regs, + .precious_table = &bm1390_precious_regs, + .max_register = BM1390_MAX_REGISTER, + .cache_type = REGCACHE_RBTREE, + .disable_locking = true, +}; + +enum { + BM1390_STATE_SAMPLE, + BM1390_STATE_FIFO, +}; + +struct bm1390_data_buf { + u32 pressure; + __be16 temp; + s64 ts __aligned(8); +}; + +/* BM1390 has FIFO for 4 pressure samples */ +#define BM1390_FIFO_LENGTH 4 + +struct bm1390_data { + s64 timestamp, old_timestamp; + struct iio_trigger *trig; + struct regmap *regmap; + struct device *dev; + struct bm1390_data_buf buf; + int irq; + unsigned int state; + bool trigger_enabled; + u8 watermark; + + /* Prevent accessing sensor during FIFO read sequence */ + struct mutex mutex; +}; + +enum { + BM1390_CHAN_PRESSURE, + BM1390_CHAN_TEMP, +}; + +static const struct iio_chan_spec bm1390_channels[] = { + { + .type = IIO_PRESSURE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + /* + * When IIR is used, we must fix amount of averaged samples. + * Thus we don't allow setting oversampling ratio. + */ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .scan_index = BM1390_CHAN_PRESSURE, + .scan_type = { + .sign = 'u', + .realbits = 22, + .storagebits = 32, + .endianness = IIO_LE, + }, + }, + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .scan_index = BM1390_CHAN_TEMP, + .scan_type = { + .sign = 's', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_BE, + }, + }, + IIO_CHAN_SOFT_TIMESTAMP(2), +}; + +/* + * We can't skip reading the pressure because the watermark IRQ is acked + * only when the pressure data is read from the FIFO. + */ +static const unsigned long bm1390_scan_masks[] = { + BIT(BM1390_CHAN_PRESSURE), + BIT(BM1390_CHAN_PRESSURE) | BIT(BM1390_CHAN_TEMP), + 0 +}; + +static int bm1390_read_temp(struct bm1390_data *data, int *temp) +{ + __be16 temp_raw; + int ret; + + ret = regmap_bulk_read(data->regmap, BM1390_REG_TEMP_HI, &temp_raw, + sizeof(temp_raw)); + if (ret) + return ret; + + *temp = be16_to_cpu(temp_raw); + + return 0; +} + +static int bm1390_pressure_read(struct bm1390_data *data, u32 *pressure) +{ + /* Pressure data is in 3 8-bit registers */ + u8 raw[3]; + int ret; + + ret = regmap_bulk_read(data->regmap, BM1390_REG_PRESSURE_BASE, + raw, sizeof(raw)); + if (ret < 0) + return ret; + + *pressure = (u32)(raw[2] >> 2 | raw[1] << 6 | raw[0] << 14); + + return 0; +} + + /* The enum values map directly to register bits */ +enum bm1390_meas_mode { + BM1390_MEAS_MODE_STOP = 0x0, + BM1390_MEAS_MODE_1SHOT = 0x1, + BM1390_MEAS_MODE_CONTINUOUS = 0x2, +}; + +static int bm1390_meas_set(struct bm1390_data *data, enum bm1390_meas_mode mode) +{ + return regmap_update_bits(data->regmap, BM1390_REG_MODE_CTRL, + BM1390_MASK_MEAS_MODE, mode); +} + +/* + * If the trigger is not used we just wait until the measurement has + * completed. The data-sheet says maximum measurement cycle (regardless + * the AVE_NUM) is 200 mS so let's just sleep at least that long. If speed + * is needed the trigger should be used. + */ +#define BM1390_MAX_MEAS_TIME_MS 205 + +static int bm1390_read_data(struct bm1390_data *data, + struct iio_chan_spec const *chan, int *val, int *val2) +{ + int ret, warn; + + mutex_lock(&data->mutex); + /* + * We use 'continuous mode' even for raw read because according to the + * data-sheet an one-shot mode can't be used with IIR filter. + */ + ret = bm1390_meas_set(data, BM1390_MEAS_MODE_CONTINUOUS); + if (ret) + goto unlock_out; + + switch (chan->type) { + case IIO_PRESSURE: + msleep(BM1390_MAX_MEAS_TIME_MS); + ret = bm1390_pressure_read(data, val); + break; + case IIO_TEMP: + msleep(BM1390_MAX_MEAS_TIME_MS); + ret = bm1390_read_temp(data, val); + break; + default: + ret = -EINVAL; + } + warn = bm1390_meas_set(data, BM1390_MEAS_MODE_STOP); + if (warn) + dev_warn(data->dev, "Failed to stop measurement (%d)\n", warn); +unlock_out: + mutex_unlock(&data->mutex); + + return ret; +} + +static int bm1390_read_raw(struct iio_dev *idev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct bm1390_data *data = iio_priv(idev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + if (chan->type == IIO_TEMP) { + *val = 31; + *val2 = 250000; + + return IIO_VAL_INT_PLUS_MICRO; + } else if (chan->type == IIO_PRESSURE) { + /* + * pressure in hPa is register value divided by 2048. + * This means kPa is 1/20480 times the register value, + */ + *val = 1; + *val2 = 2048; + + return IIO_VAL_FRACTIONAL; + } + + return -EINVAL; + case IIO_CHAN_INFO_RAW: + ret = iio_device_claim_direct_mode(idev); + if (ret) + return ret; + + ret = bm1390_read_data(data, chan, val, val2); + iio_device_release_direct_mode(idev); + if (ret) + return ret; + + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static int __bm1390_fifo_flush(struct iio_dev *idev, unsigned int samples, + s64 timestamp) +{ + /* BM1390_FIFO_LENGTH is small so we shouldn't run out of stack */ + struct bm1390_data_buf buffer[BM1390_FIFO_LENGTH]; + struct bm1390_data *data = iio_priv(idev); + int smp_lvl, ret, i, warn, dummy; + u64 sample_period; + __be16 temp = 0; + + ret = regmap_read(data->regmap, BM1390_REG_FIFO_LVL, &smp_lvl); + if (ret) + return ret; + + smp_lvl = FIELD_GET(BM1390_MASK_FIFO_LVL, smp_lvl); + if (!smp_lvl) + return 0; + + if (smp_lvl > BM1390_FIFO_LENGTH) { + /* + * The fifo holds maximum of 4 samples so valid values + * should be 0, 1, 2, 3, 4 - rest are probably bit errors + * in I2C line. Don't overflow if this happens. + */ + dev_err(data->dev, "bad FIFO level %d\n", smp_lvl); + smp_lvl = BM1390_FIFO_LENGTH; + } + + sample_period = timestamp - data->old_timestamp; + do_div(sample_period, smp_lvl); + + if (samples && smp_lvl > samples) + smp_lvl = samples; + + + /* + * After some testing it appears that the temperature is not readable + * until the FIFO access has been done after the WMI. Thus, we need + * to read the all pressure values to memory and read the temperature + * only after that. + */ + for (i = 0; i < smp_lvl; i++) { + /* + * When we start reading data from the FIFO the sensor goes to + * special FIFO reading mode. If any other register is accessed + * during the FIFO read, samples can be dropped. Prevent access + * until FIFO_LVL is read. We have mutex locked and we do also + * go performing reading of FIFO_LVL even if this read fails. + */ + if (test_bit(BM1390_CHAN_PRESSURE, idev->active_scan_mask)) { + ret = bm1390_pressure_read(data, &buffer[i].pressure); + if (ret) + break; + } + + /* + * Old timestamp is either the previous sample IRQ time, + * previous flush-time or, if this was first sample, the enable + * time. When we add a sample period to that we should get the + * best approximation of the time-stamp we are handling. + * + * Idea is to always keep the "old_timestamp" matching the + * timestamp which we are currently handling. + */ + data->old_timestamp += sample_period; + buffer[i].ts = data->old_timestamp; + } + /* Reading the FIFO_LVL closes the FIFO access sequence */ + warn = regmap_read(data->regmap, BM1390_REG_FIFO_LVL, &dummy); + if (warn) + dev_warn(data->dev, "Closing FIFO sequence failed\n"); + + if (ret) + return ret; + + if (test_bit(BM1390_CHAN_TEMP, idev->active_scan_mask)) { + ret = regmap_bulk_read(data->regmap, BM1390_REG_TEMP_HI, &temp, + sizeof(temp)); + if (ret) + return ret; + } + + if (ret) + return ret; + + for (i = 0; i < smp_lvl; i++) { + buffer[i].temp = temp; + iio_push_to_buffers(idev, &buffer[i]); + } + + return smp_lvl; +} + +static int bm1390_fifo_flush(struct iio_dev *idev, unsigned int samples) +{ + struct bm1390_data *data = iio_priv(idev); + s64 timestamp; + int ret; + + /* + * If fifo_flush is being called from IRQ handler we know the stored + * timestamp is fairly accurate for the last stored sample. If we are + * called as a result of a read operation from userspace and hence + * before the watermark interrupt was triggered, take a timestamp + * now. We can fall anywhere in between two samples so the error in this + * case is at most one sample period. + * We need to have the IRQ disabled or we risk of messing-up + * the timestamps. If we are ran from IRQ, then the + * IRQF_ONESHOT has us covered - but if we are ran by the + * user-space read we need to disable the IRQ to be on a safe + * side. We do this usng synchronous disable so that if the + * IRQ thread is being ran on other CPU we wait for it to be + * finished. + */ + + timestamp = iio_get_time_ns(idev); + mutex_lock(&data->mutex); + ret = __bm1390_fifo_flush(idev, samples, timestamp); + mutex_unlock(&data->mutex); + + return ret; +} + +static int bm1390_set_watermark(struct iio_dev *idev, unsigned int val) +{ + struct bm1390_data *data = iio_priv(idev); + + if (val < BM1390_WMI_MIN || val > BM1390_WMI_MAX) + return -EINVAL; + + mutex_lock(&data->mutex); + data->watermark = val; + mutex_unlock(&data->mutex); + + return 0; +} + +static const struct iio_info bm1390_noirq_info = { + .read_raw = &bm1390_read_raw, +}; + +static const struct iio_info bm1390_info = { + .read_raw = &bm1390_read_raw, + .hwfifo_set_watermark = bm1390_set_watermark, + .hwfifo_flush_to_buffer = bm1390_fifo_flush, +}; + +static int bm1390_chip_init(struct bm1390_data *data) +{ + int ret; + + ret = regmap_write_bits(data->regmap, BM1390_REG_POWER, + BM1390_MASK_POWER, BM1390_POWER_ON); + if (ret) + return ret; + + msleep(1); + + ret = regmap_write_bits(data->regmap, BM1390_REG_RESET, + BM1390_MASK_RESET, BM1390_RESET); + if (ret) + return ret; + + msleep(1); + + ret = regmap_write_bits(data->regmap, BM1390_REG_RESET, + BM1390_MASK_RESET, BM1390_RESET_RELEASE); + if (ret) + return ret; + + msleep(1); + + ret = regmap_reinit_cache(data->regmap, &bm1390_regmap); + if (ret) { + dev_err(data->dev, "Failed to reinit reg cache\n"); + return ret; + } + + /* + * Default to use IIR filter in "middle" mode. Also the AVE_NUM must + * be fixed when IIR is in use. + */ + ret = regmap_update_bits(data->regmap, BM1390_REG_MODE_CTRL, + BM1390_MASK_AVE_NUM, BM1390_IIR_AVE_NUM); + if (ret) + return ret; + + return regmap_update_bits(data->regmap, BM1390_REG_FIFO_CTRL, + BM1390_MASK_IIR_MODE, BM1390_IIR_MODE_MID); +} + +static int bm1390_fifo_set_wmi(struct bm1390_data *data) +{ + u8 regval; + + regval = FIELD_PREP(BM1390_MASK_FIFO_LEN, + data->watermark - BM1390_WMI_MIN); + + return regmap_update_bits(data->regmap, BM1390_REG_FIFO_CTRL, + BM1390_MASK_FIFO_LEN, regval); +} + +static int bm1390_fifo_enable(struct iio_dev *idev) +{ + struct bm1390_data *data = iio_priv(idev); + int ret; + + /* We can't do buffered stuff without IRQ as we never get WMI */ + if (data->irq <= 0) + return -EINVAL; + + mutex_lock(&data->mutex); + if (data->trigger_enabled) { + ret = -EBUSY; + goto unlock_out; + } + + /* Update watermark to HW */ + ret = bm1390_fifo_set_wmi(data); + if (ret) + goto unlock_out; + + /* Enable WMI_IRQ */ + ret = regmap_set_bits(data->regmap, BM1390_REG_MODE_CTRL, + BM1390_MASK_WMI_EN); + if (ret) + goto unlock_out; + + /* Enable FIFO */ + ret = regmap_set_bits(data->regmap, BM1390_REG_FIFO_CTRL, + BM1390_MASK_FIFO_EN); + if (ret) + goto unlock_out; + + data->state = BM1390_STATE_FIFO; + + data->old_timestamp = iio_get_time_ns(idev); + ret = bm1390_meas_set(data, BM1390_MEAS_MODE_CONTINUOUS); + +unlock_out: + mutex_unlock(&data->mutex); + + return ret; +} + +static int bm1390_fifo_disable(struct iio_dev *idev) +{ + struct bm1390_data *data = iio_priv(idev); + int ret; + + msleep(1); + + mutex_lock(&data->mutex); + ret = bm1390_meas_set(data, BM1390_MEAS_MODE_STOP); + if (ret) + goto unlock_out; + + /* Disable FIFO */ + ret = regmap_clear_bits(data->regmap, BM1390_REG_FIFO_CTRL, + BM1390_MASK_FIFO_EN); + if (ret) + goto unlock_out; + + data->state = BM1390_STATE_SAMPLE; + + /* Disable WMI_IRQ */ + ret = regmap_clear_bits(data->regmap, BM1390_REG_MODE_CTRL, + BM1390_MASK_WMI_EN); + +unlock_out: + mutex_unlock(&data->mutex); + + return ret; +} + +static int bm1390_buffer_postenable(struct iio_dev *idev) +{ + /* + * If we use data-ready trigger, then the IRQ masks should be handled by + * trigger enable and the hardware buffer is not used but we just update + * results to the IIO FIFO when data-ready triggers. + */ + if (iio_device_get_current_mode(idev) == INDIO_BUFFER_TRIGGERED) + return 0; + + return bm1390_fifo_enable(idev); +} + +static int bm1390_buffer_predisable(struct iio_dev *idev) +{ + if (iio_device_get_current_mode(idev) == INDIO_BUFFER_TRIGGERED) + return 0; + + return bm1390_fifo_disable(idev); +} + +static const struct iio_buffer_setup_ops bm1390_buffer_ops = { + .postenable = bm1390_buffer_postenable, + .predisable = bm1390_buffer_predisable, +}; + +static irqreturn_t bm1390_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *idev = pf->indio_dev; + struct bm1390_data *data = iio_priv(idev); + int ret, status; + + /* DRDY is acked by reading status reg */ + ret = regmap_read(data->regmap, BM1390_REG_STATUS, &status); + if (ret || !status) + return IRQ_NONE; + + dev_dbg(data->dev, "DRDY trig status 0x%x\n", status); + + if (test_bit(BM1390_CHAN_PRESSURE, idev->active_scan_mask)) { + ret = bm1390_pressure_read(data, &data->buf.pressure); + if (ret) { + dev_warn(data->dev, "sample read failed %d\n", ret); + return IRQ_NONE; + } + } + + if (test_bit(BM1390_CHAN_TEMP, idev->active_scan_mask)) { + ret = regmap_bulk_read(data->regmap, BM1390_REG_TEMP_HI, + &data->buf.temp, sizeof(data->buf.temp)); + if (ret) { + dev_warn(data->dev, "temp read failed %d\n", ret); + return IRQ_HANDLED; + } + } + + iio_push_to_buffers_with_timestamp(idev, &data->buf, data->timestamp); + iio_trigger_notify_done(idev->trig); + + return IRQ_HANDLED; +} + +/* Get timestamps and wake the thread if we need to read data */ +static irqreturn_t bm1390_irq_handler(int irq, void *private) +{ + struct iio_dev *idev = private; + struct bm1390_data *data = iio_priv(idev); + + data->timestamp = iio_get_time_ns(idev); + + if (data->state == BM1390_STATE_FIFO || data->trigger_enabled) + return IRQ_WAKE_THREAD; + + return IRQ_NONE; +} + +static irqreturn_t bm1390_irq_thread_handler(int irq, void *private) +{ + struct iio_dev *idev = private; + struct bm1390_data *data = iio_priv(idev); + int ret = IRQ_NONE; + + mutex_lock(&data->mutex); + + if (data->trigger_enabled) { + iio_trigger_poll_nested(data->trig); + ret = IRQ_HANDLED; + } else if (data->state == BM1390_STATE_FIFO) { + int ok; + + ok = __bm1390_fifo_flush(idev, BM1390_FIFO_LENGTH, + data->timestamp); + if (ok > 0) + ret = IRQ_HANDLED; + } + + mutex_unlock(&data->mutex); + + return ret; +} + +static int bm1390_set_drdy_irq(struct bm1390_data *data, bool en) +{ + if (en) + return regmap_set_bits(data->regmap, BM1390_REG_MODE_CTRL, + BM1390_MASK_DRDY_EN); + return regmap_clear_bits(data->regmap, BM1390_REG_MODE_CTRL, + BM1390_MASK_DRDY_EN); +} + +static int bm1390_trigger_set_state(struct iio_trigger *trig, + bool state) +{ + struct bm1390_data *data = iio_trigger_get_drvdata(trig); + int ret = 0; + + mutex_lock(&data->mutex); + + if (data->trigger_enabled == state) + goto unlock_out; + + if (data->state == BM1390_STATE_FIFO) { + dev_warn(data->dev, "Can't set trigger when FIFO enabled\n"); + ret = -EBUSY; + goto unlock_out; + } + + data->trigger_enabled = state; + + if (state) { + ret = bm1390_meas_set(data, BM1390_MEAS_MODE_CONTINUOUS); + if (ret) + goto unlock_out; + } else { + int dummy; + + ret = bm1390_meas_set(data, BM1390_MEAS_MODE_STOP); + if (ret) + goto unlock_out; + + /* + * We need to read the status register in order to ACK the + * data-ready which may have been generated just before we + * disabled the measurement. + */ + ret = regmap_read(data->regmap, BM1390_REG_STATUS, &dummy); + if (ret) + dev_warn(data->dev, "status read failed\n"); + } + + ret = bm1390_set_drdy_irq(data, state); + +unlock_out: + mutex_unlock(&data->mutex); + + return ret; +} + +static const struct iio_trigger_ops bm1390_trigger_ops = { + .set_trigger_state = bm1390_trigger_set_state, +}; + +static int bm1390_setup_buffer(struct bm1390_data *data, struct iio_dev *idev) +{ + int ret; + + ret = devm_iio_triggered_buffer_setup(data->dev, idev, + &iio_pollfunc_store_time, + &bm1390_trigger_handler, + &bm1390_buffer_ops); + + if (ret) + return dev_err_probe(data->dev, ret, + "iio_triggered_buffer_setup FAIL\n"); + + idev->available_scan_masks = bm1390_scan_masks; + + return 0; +} + +static int bm1390_setup_trigger(struct bm1390_data *data, struct iio_dev *idev, + int irq) +{ + struct iio_trigger *itrig; + char *name; + int ret; + + itrig = devm_iio_trigger_alloc(data->dev, "%sdata-rdy-dev%d", idev->name, + iio_device_id(idev)); + if (!itrig) + return -ENOMEM; + + data->trig = itrig; + + itrig->ops = &bm1390_trigger_ops; + iio_trigger_set_drvdata(itrig, data); + + name = devm_kasprintf(data->dev, GFP_KERNEL, "%s-bm1390", + dev_name(data->dev)); + if (name == NULL) + return -ENOMEM; + + ret = devm_request_threaded_irq(data->dev, irq, bm1390_irq_handler, + &bm1390_irq_thread_handler, + IRQF_ONESHOT, name, idev); + if (ret) + return dev_err_probe(data->dev, ret, "Could not request IRQ\n"); + + + ret = devm_iio_trigger_register(data->dev, itrig); + if (ret) + return dev_err_probe(data->dev, ret, + "Trigger registration failed\n"); + + return 0; +} + +static int bm1390_probe(struct i2c_client *i2c) +{ + struct bm1390_data *data; + struct regmap *regmap; + struct iio_dev *idev; + struct device *dev; + unsigned int part_id; + int ret; + + dev = &i2c->dev; + + regmap = devm_regmap_init_i2c(i2c, &bm1390_regmap); + if (IS_ERR(regmap)) + return dev_err_probe(dev, PTR_ERR(regmap), + "Failed to initialize Regmap\n"); + + ret = devm_regulator_get_enable(dev, "vdd"); + if (ret) + return dev_err_probe(dev, ret, "Failed to get regulator\n"); + + ret = regmap_read(regmap, BM1390_REG_PART_ID, &part_id); + if (ret) + return dev_err_probe(dev, ret, "Failed to access sensor\n"); + + if (part_id != BM1390_ID) + dev_warn(dev, "unknown device 0x%x\n", part_id); + + idev = devm_iio_device_alloc(dev, sizeof(*data)); + if (!idev) + return -ENOMEM; + + data = iio_priv(idev); + data->regmap = regmap; + data->dev = dev; + data->irq = i2c->irq; + /* + * For now we just allow BM1390_WMI_MIN to BM1390_WMI_MAX and + * discard every other configuration when triggered mode is not used. + */ + data->watermark = BM1390_WMI_MAX; + mutex_init(&data->mutex); + + idev->channels = bm1390_channels; + idev->num_channels = ARRAY_SIZE(bm1390_channels); + idev->name = "bm1390"; + idev->modes = INDIO_DIRECT_MODE; + + ret = bm1390_chip_init(data); + if (ret) + return dev_err_probe(dev, ret, "sensor init failed\n"); + + ret = bm1390_setup_buffer(data, idev); + if (ret) + return ret; + + /* No trigger if we don't have IRQ for data-ready and WMI */ + if (i2c->irq > 0) { + idev->info = &bm1390_info; + idev->modes |= INDIO_BUFFER_SOFTWARE; + ret = bm1390_setup_trigger(data, idev, i2c->irq); + if (ret) + return ret; + } else { + idev->info = &bm1390_noirq_info; + } + + ret = devm_iio_device_register(dev, idev); + if (ret < 0) + return dev_err_probe(dev, ret, + "Unable to register iio device\n"); + + return 0; +} + +static const struct of_device_id bm1390_of_match[] = { + { .compatible = "rohm,bm1390glv-z" }, + {} +}; +MODULE_DEVICE_TABLE(of, bm1390_of_match); + +static const struct i2c_device_id bm1390_id[] = { + { "bm1390glv-z", }, + {} +}; +MODULE_DEVICE_TABLE(i2c, bm1390_id); + +static struct i2c_driver bm1390_driver = { + .driver = { + .name = "bm1390", + .of_match_table = bm1390_of_match, + /* + * Probing explicitly requires a few millisecond of sleep. + * Enabling the VDD regulator may include ramp up rates. + */ + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + }, + .probe = bm1390_probe, + .id_table = bm1390_id, +}; +module_i2c_driver(bm1390_driver); + +MODULE_AUTHOR("Matti Vaittinen <mazziesaccount@gmail.com>"); +MODULE_DESCRIPTION("Driver for ROHM BM1390 pressure sensor"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/proximity/cros_ec_mkbp_proximity.c b/drivers/iio/proximity/cros_ec_mkbp_proximity.c index 571ea1812246..4df506bb8b38 100644 --- a/drivers/iio/proximity/cros_ec_mkbp_proximity.c +++ b/drivers/iio/proximity/cros_ec_mkbp_proximity.c @@ -239,15 +239,13 @@ static int cros_ec_mkbp_proximity_probe(struct platform_device *pdev) return 0; } -static int cros_ec_mkbp_proximity_remove(struct platform_device *pdev) +static void cros_ec_mkbp_proximity_remove(struct platform_device *pdev) { struct cros_ec_mkbp_proximity_data *data = platform_get_drvdata(pdev); struct cros_ec_device *ec = data->ec; blocking_notifier_chain_unregister(&ec->event_notifier, &data->notifier); - - return 0; } static const struct of_device_id cros_ec_mkbp_proximity_of_match[] = { @@ -263,7 +261,7 @@ static struct platform_driver cros_ec_mkbp_proximity_driver = { .pm = pm_sleep_ptr(&cros_ec_mkbp_proximity_pm_ops), }, .probe = cros_ec_mkbp_proximity_probe, - .remove = cros_ec_mkbp_proximity_remove, + .remove_new = cros_ec_mkbp_proximity_remove, }; module_platform_driver(cros_ec_mkbp_proximity_driver); diff --git a/drivers/iio/proximity/srf04.c b/drivers/iio/proximity/srf04.c index faf2f806ce80..86c57672fc7e 100644 --- a/drivers/iio/proximity/srf04.c +++ b/drivers/iio/proximity/srf04.c @@ -344,7 +344,7 @@ static int srf04_probe(struct platform_device *pdev) return ret; } -static int srf04_remove(struct platform_device *pdev) +static void srf04_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct srf04_data *data = iio_priv(indio_dev); @@ -355,8 +355,6 @@ static int srf04_remove(struct platform_device *pdev) pm_runtime_disable(data->dev); pm_runtime_set_suspended(data->dev); } - - return 0; } static int srf04_pm_runtime_suspend(struct device *dev) @@ -391,7 +389,7 @@ static const struct dev_pm_ops srf04_pm_ops = { static struct platform_driver srf04_driver = { .probe = srf04_probe, - .remove = srf04_remove, + .remove_new = srf04_remove, .driver = { .name = "srf04-gpio", .of_match_table = of_srf04_match, diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c index d977aacb7491..0d230a0dff56 100644 --- a/drivers/iio/proximity/sx9310.c +++ b/drivers/iio/proximity/sx9310.c @@ -159,6 +159,11 @@ static_assert(SX9310_NUM_CHANNELS <= SX_COMMON_MAX_NUM_CHANNELS); } #define SX9310_CHANNEL(idx) SX9310_NAMED_CHANNEL(idx, NULL) +struct sx931x_info { + const char *name; + unsigned int whoami; +}; + static const struct iio_chan_spec sx9310_channels[] = { SX9310_CHANNEL(0), /* CS0 */ SX9310_CHANNEL(1), /* CS1 */ @@ -902,7 +907,7 @@ static int sx9310_check_whoami(struct device *dev, struct iio_dev *indio_dev) { struct sx_common_data *data = iio_priv(indio_dev); - unsigned int long ddata; + const struct sx931x_info *ddata; unsigned int whoami; int ret; @@ -910,20 +915,11 @@ static int sx9310_check_whoami(struct device *dev, if (ret) return ret; - ddata = (uintptr_t)device_get_match_data(dev); - if (ddata != whoami) - return -EINVAL; - - switch (whoami) { - case SX9310_WHOAMI_VALUE: - indio_dev->name = "sx9310"; - break; - case SX9311_WHOAMI_VALUE: - indio_dev->name = "sx9311"; - break; - default: + ddata = device_get_match_data(dev); + if (ddata->whoami != whoami) return -ENODEV; - } + + indio_dev->name = ddata->name; return 0; } @@ -1015,23 +1011,33 @@ out: static DEFINE_SIMPLE_DEV_PM_OPS(sx9310_pm_ops, sx9310_suspend, sx9310_resume); +static const struct sx931x_info sx9310_info = { + .name = "sx9310", + .whoami = SX9310_WHOAMI_VALUE, +}; + +static const struct sx931x_info sx9311_info = { + .name = "sx9311", + .whoami = SX9311_WHOAMI_VALUE, +}; + static const struct acpi_device_id sx9310_acpi_match[] = { - { "STH9310", SX9310_WHOAMI_VALUE }, - { "STH9311", SX9311_WHOAMI_VALUE }, + { "STH9310", (kernel_ulong_t)&sx9310_info }, + { "STH9311", (kernel_ulong_t)&sx9311_info }, {} }; MODULE_DEVICE_TABLE(acpi, sx9310_acpi_match); static const struct of_device_id sx9310_of_match[] = { - { .compatible = "semtech,sx9310", (void *)SX9310_WHOAMI_VALUE }, - { .compatible = "semtech,sx9311", (void *)SX9311_WHOAMI_VALUE }, + { .compatible = "semtech,sx9310", &sx9310_info }, + { .compatible = "semtech,sx9311", &sx9311_info }, {} }; MODULE_DEVICE_TABLE(of, sx9310_of_match); static const struct i2c_device_id sx9310_id[] = { - { "sx9310", SX9310_WHOAMI_VALUE }, - { "sx9311", SX9311_WHOAMI_VALUE }, + { "sx9310", (kernel_ulong_t)&sx9310_info }, + { "sx9311", (kernel_ulong_t)&sx9311_info }, {} }; MODULE_DEVICE_TABLE(i2c, sx9310_id); diff --git a/drivers/iio/resolver/Kconfig b/drivers/iio/resolver/Kconfig index 47dbfead9b31..424529d36080 100644 --- a/drivers/iio/resolver/Kconfig +++ b/drivers/iio/resolver/Kconfig @@ -25,4 +25,17 @@ config AD2S1200 To compile this driver as a module, choose M here: the module will be called ad2s1200. + +config AD2S1210 + tristate "Analog Devices ad2s1210 driver" + depends on SPI + depends on COMMON_CLK + depends on GPIOLIB || COMPILE_TEST + help + Say yes here to build support for Analog Devices spi resolver + to digital converters, ad2s1210, provides direct access via sysfs. + + To compile this driver as a module, choose M here: the + module will be called ad2s1210. + endmenu diff --git a/drivers/iio/resolver/Makefile b/drivers/iio/resolver/Makefile index fa558138ce45..7f6c876c35ae 100644 --- a/drivers/iio/resolver/Makefile +++ b/drivers/iio/resolver/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_AD2S90) += ad2s90.o obj-$(CONFIG_AD2S1200) += ad2s1200.o +obj-$(CONFIG_AD2S1210) += ad2s1210.o diff --git a/drivers/iio/resolver/ad2s1210.c b/drivers/iio/resolver/ad2s1210.c new file mode 100644 index 000000000000..1bd1b950e7cc --- /dev/null +++ b/drivers/iio/resolver/ad2s1210.c @@ -0,0 +1,1519 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ad2s1210.c support for the ADI Resolver to Digital Converters: AD2S1210 + * + * Copyright (c) 2010-2010 Analog Devices Inc. + * Copyright (c) 2023 BayLibre, SAS + * + * Device register to IIO ABI mapping: + * + * Register | Addr | IIO ABI (sysfs) + * ----------------------------|------|------------------------------------------- + * DOS Overrange Threshold | 0x89 | events/in_altvoltage0_thresh_rising_value + * DOS Mismatch Threshold | 0x8A | events/in_altvoltage0_mag_rising_value + * DOS Reset Maximum Threshold | 0x8B | events/in_altvoltage0_mag_rising_reset_max + * DOS Reset Minimum Threshold | 0x8C | events/in_altvoltage0_mag_rising_reset_min + * LOT High Threshold | 0x8D | events/in_angl1_thresh_rising_value + * LOT Low Threshold [1] | 0x8E | events/in_angl1_thresh_rising_hysteresis + * Excitation Frequency | 0x91 | out_altvoltage0_frequency + * Control | 0x92 | *as bit fields* + * Phase lock range | D5 | events/in_phase0_mag_rising_value + * Hysteresis | D4 | in_angl0_hysteresis + * Encoder resolution | D3:2 | *not implemented* + * Resolution | D1:0 | *device tree: assigned-resolution-bits* + * Soft Reset | 0xF0 | [2] + * Fault | 0xFF | *not implemented* + * + * [1]: The value written to the LOT low register is high value minus the + * hysteresis. + * [2]: Soft reset is performed when `out_altvoltage0_frequency` is written. + * + * Fault to event mapping: + * + * Fault | | Channel | Type | Direction + * ----------------------------------------|----|--------------------------------- + * Sine/cosine inputs clipped [3] | D7 | altvoltage1 | mag | either + * Sine/cosine inputs below LOS | D6 | altvoltage0 | thresh | falling + * Sine/cosine inputs exceed DOS overrange | D5 | altvoltage0 | thresh | rising + * Sine/cosine inputs exceed DOS mismatch | D4 | altvoltage0 | mag | rising + * Tracking error exceeds LOT | D3 | angl1 | thresh | rising + * Velocity exceeds maximum tracking rate | D2 | anglvel0 | mag | rising + * Phase error exceeds phase lock range | D1 | phase0 | mag | rising + * Configuration parity error | D0 | *writes to kernel log* + * + * [3]: The chip does not differentiate between fault on sine vs. cosine so + * there will also be an event on the altvoltage2 channel. + */ + +#include <linux/bitfield.h> +#include <linux/bits.h> +#include <linux/cleanup.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/spi/spi.h> +#include <linux/sysfs.h> +#include <linux/types.h> + +#include <linux/iio/buffer.h> +#include <linux/iio/events.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> + +/* control register flags */ +#define AD2S1210_ADDRESS_DATA BIT(7) +#define AD2S1210_PHASE_LOCK_RANGE_44 BIT(5) +#define AD2S1210_ENABLE_HYSTERESIS BIT(4) +#define AD2S1210_SET_ENRES GENMASK(3, 2) +#define AD2S1210_SET_RES GENMASK(1, 0) + +/* fault register flags */ +#define AD2S1210_FAULT_CLIP BIT(7) +#define AD2S1210_FAULT_LOS BIT(6) +#define AD2S1210_FAULT_DOS_OVR BIT(5) +#define AD2S1210_FAULT_DOS_MIS BIT(4) +#define AD2S1210_FAULT_LOT BIT(3) +#define AD2S1210_FAULT_VELOCITY BIT(2) +#define AD2S1210_FAULT_PHASE BIT(1) +#define AD2S1210_FAULT_CONFIG_PARITY BIT(0) + +#define AD2S1210_REG_POSITION_MSB 0x80 +#define AD2S1210_REG_POSITION_LSB 0x81 +#define AD2S1210_REG_VELOCITY_MSB 0x82 +#define AD2S1210_REG_VELOCITY_LSB 0x83 +#define AD2S1210_REG_LOS_THRD 0x88 +#define AD2S1210_REG_DOS_OVR_THRD 0x89 +#define AD2S1210_REG_DOS_MIS_THRD 0x8A +#define AD2S1210_REG_DOS_RST_MAX_THRD 0x8B +#define AD2S1210_REG_DOS_RST_MIN_THRD 0x8C +#define AD2S1210_REG_LOT_HIGH_THRD 0x8D +#define AD2S1210_REG_LOT_LOW_THRD 0x8E +#define AD2S1210_REG_EXCIT_FREQ 0x91 +#define AD2S1210_REG_CONTROL 0x92 +#define AD2S1210_REG_SOFT_RESET 0xF0 +#define AD2S1210_REG_FAULT 0xFF + +#define AD2S1210_MIN_CLKIN 6144000 +#define AD2S1210_MAX_CLKIN 10240000 +#define AD2S1210_MIN_EXCIT 2000 +#define AD2S1210_DEF_EXCIT 10000 +#define AD2S1210_MAX_EXCIT 20000 +#define AD2S1210_MIN_FCW 0x4 +#define AD2S1210_MAX_FCW 0x50 + +/* 44 degrees ~= 0.767945 radians */ +#define PHASE_44_DEG_TO_RAD_INT 0 +#define PHASE_44_DEG_TO_RAD_MICRO 767945 +/* 360 degrees ~= 6.283185 radians */ +#define PHASE_360_DEG_TO_RAD_INT 6 +#define PHASE_360_DEG_TO_RAD_MICRO 283185 + +/* Threshold voltage registers have 1 LSB == 38 mV */ +#define THRESHOLD_MILLIVOLT_PER_LSB 38 +/* max voltage for threshold registers is 0x7F * 38 mV */ +#define THRESHOLD_RANGE_STR "[0 38 4826]" + +#define FAULT_ONESHOT(bit, new, old) (new & bit && !(old & bit)) + +enum ad2s1210_mode { + MOD_POS = 0b00, + MOD_VEL = 0b01, + MOD_RESERVED = 0b10, + MOD_CONFIG = 0b11, +}; + +enum ad2s1210_resolution { + AD2S1210_RES_10 = 0b00, + AD2S1210_RES_12 = 0b01, + AD2S1210_RES_14 = 0b10, + AD2S1210_RES_16 = 0b11, +}; + +struct ad2s1210_state { + struct mutex lock; + struct spi_device *sdev; + /** GPIO pin connected to SAMPLE line. */ + struct gpio_desc *sample_gpio; + /** GPIO pins connected to A0 and A1 lines. */ + struct gpio_descs *mode_gpios; + /** Used to access config registers. */ + struct regmap *regmap; + /** The external oscillator frequency in Hz. */ + unsigned long clkin_hz; + /** Available raw hysteresis values based on resolution. */ + int hysteresis_available[2]; + /** The selected resolution */ + enum ad2s1210_resolution resolution; + /** Copy of fault register from the previous read. */ + u8 prev_fault_flags; + /** For reading raw sample value via SPI. */ + struct { + __be16 raw; + u8 fault; + } sample __aligned(IIO_DMA_MINALIGN); + /** Scan buffer */ + struct { + __be16 chan[2]; + /* Ensure timestamp is naturally aligned. */ + s64 timestamp __aligned(8); + } scan; + /** SPI transmit buffer. */ + u8 rx[2]; + /** SPI receive buffer. */ + u8 tx[2]; +}; + +static int ad2s1210_set_mode(struct ad2s1210_state *st, enum ad2s1210_mode mode) +{ + struct gpio_descs *gpios = st->mode_gpios; + DECLARE_BITMAP(bitmap, 2); + + bitmap[0] = mode; + + return gpiod_set_array_value(gpios->ndescs, gpios->desc, gpios->info, + bitmap); +} + +/* + * Writes the given data to the given register address. + * + * If the mode is configurable, the device will first be placed in + * configuration mode. + */ +static int ad2s1210_regmap_reg_write(void *context, unsigned int reg, + unsigned int val) +{ + struct ad2s1210_state *st = context; + struct spi_transfer xfers[] = { + { + .len = 1, + .rx_buf = &st->rx[0], + .tx_buf = &st->tx[0], + .cs_change = 1, + }, { + .len = 1, + .rx_buf = &st->rx[1], + .tx_buf = &st->tx[1], + }, + }; + int ret; + + /* values can only be 7 bits, the MSB indicates an address */ + if (val & ~0x7F) + return -EINVAL; + + st->tx[0] = reg; + st->tx[1] = val; + + ret = ad2s1210_set_mode(st, MOD_CONFIG); + if (ret < 0) + return ret; + + ret = spi_sync_transfer(st->sdev, xfers, ARRAY_SIZE(xfers)); + if (ret < 0) + return ret; + + /* soft reset also clears the fault register */ + if (reg == AD2S1210_REG_SOFT_RESET) + st->prev_fault_flags = 0; + + return 0; +} + +/* + * Reads value from one of the registers. + * + * If the mode is configurable, the device will first be placed in + * configuration mode. + */ +static int ad2s1210_regmap_reg_read(void *context, unsigned int reg, + unsigned int *val) +{ + struct ad2s1210_state *st = context; + struct spi_transfer xfers[] = { + { + .len = 1, + .rx_buf = &st->rx[0], + .tx_buf = &st->tx[0], + .cs_change = 1, + }, { + .len = 1, + .rx_buf = &st->rx[1], + .tx_buf = &st->tx[1], + }, + }; + int ret; + + ret = ad2s1210_set_mode(st, MOD_CONFIG); + if (ret < 0) + return ret; + + st->tx[0] = reg; + /* + * Must be valid register address here otherwise this could write data. + * It doesn't matter which one as long as reading doesn't have side- + * effects. + */ + st->tx[1] = AD2S1210_REG_CONTROL; + + ret = spi_sync_transfer(st->sdev, xfers, ARRAY_SIZE(xfers)); + if (ret < 0) + return ret; + + /* reading the fault register also clears it */ + if (reg == AD2S1210_REG_FAULT) + st->prev_fault_flags = 0; + + /* + * If the D7 bit is set on any read/write register, it indicates a + * parity error. The fault register is read-only and the D7 bit means + * something else there. + */ + if (reg != AD2S1210_REG_FAULT && st->rx[1] & AD2S1210_ADDRESS_DATA) + return -EBADMSG; + + *val = st->rx[1]; + + return 0; +} + +/* + * Toggles the SAMPLE line on the AD2S1210 to latch in the current position, + * velocity, and faults. + * + * Must be called with lock held. + */ +static void ad2s1210_toggle_sample_line(struct ad2s1210_state *st) +{ + /* + * Datasheet specifies minimum hold time t16 = 2 * tck + 20 ns. So the + * longest time needed is when CLKIN is 6.144 MHz, in which case t16 + * ~= 350 ns. The same delay is also needed before re-asserting the + * SAMPLE line. + */ + gpiod_set_value(st->sample_gpio, 1); + ndelay(350); + gpiod_set_value(st->sample_gpio, 0); + ndelay(350); +} + +/* + * Sets the excitation frequency and performs software reset. + * + * Must be called with lock held. + */ +static int ad2s1210_reinit_excitation_frequency(struct ad2s1210_state *st, + u16 fexcit) +{ + /* Map resolution to settle time in milliseconds. */ + static const int track_time_ms[] = { 10, 20, 25, 60 }; + unsigned int ignored; + int ret; + u8 fcw; + + fcw = fexcit * (1 << 15) / st->clkin_hz; + if (fcw < AD2S1210_MIN_FCW || fcw > AD2S1210_MAX_FCW) + return -ERANGE; + + ret = regmap_write(st->regmap, AD2S1210_REG_EXCIT_FREQ, fcw); + if (ret < 0) + return ret; + + /* + * Software reset reinitializes the excitation frequency output. + * It does not reset any of the configuration registers. + */ + ret = regmap_write(st->regmap, AD2S1210_REG_SOFT_RESET, 0); + if (ret < 0) + return ret; + + /* + * Soft reset always triggers some faults due the change in the output + * signal so clear the faults too. We need to delay for some time + * (what datasheet calls t[track]) to allow things to settle before + * clearing the faults. + */ + msleep(track_time_ms[st->resolution] * 8192000 / st->clkin_hz); + + /* Reading the fault register clears the faults. */ + ret = regmap_read(st->regmap, AD2S1210_REG_FAULT, &ignored); + if (ret < 0) + return ret; + + /* Have to toggle sample line to get fault output pins to reset. */ + ad2s1210_toggle_sample_line(st); + + return 0; +} + +static void ad2s1210_push_events(struct iio_dev *indio_dev, + u8 flags, s64 timestamp) +{ + struct ad2s1210_state *st = iio_priv(indio_dev); + + /* Sine/cosine inputs clipped */ + if (FAULT_ONESHOT(AD2S1210_FAULT_CLIP, flags, st->prev_fault_flags)) { + /* + * The chip does not differentiate between fault on sine vs. + * cosine channel so we just send an event on both channels. + */ + iio_push_event(indio_dev, + IIO_UNMOD_EVENT_CODE(IIO_ALTVOLTAGE, 1, + IIO_EV_TYPE_MAG, + IIO_EV_DIR_EITHER), + timestamp); + iio_push_event(indio_dev, + IIO_UNMOD_EVENT_CODE(IIO_ALTVOLTAGE, 2, + IIO_EV_TYPE_MAG, + IIO_EV_DIR_EITHER), + timestamp); + } + + /* Sine/cosine inputs below LOS threshold */ + if (FAULT_ONESHOT(AD2S1210_FAULT_LOS, flags, st->prev_fault_flags)) + iio_push_event(indio_dev, + IIO_UNMOD_EVENT_CODE(IIO_ALTVOLTAGE, 0, + IIO_EV_TYPE_THRESH, + IIO_EV_DIR_FALLING), + timestamp); + + /* Sine/cosine inputs exceed DOS overrange threshold */ + if (FAULT_ONESHOT(AD2S1210_FAULT_DOS_OVR, flags, st->prev_fault_flags)) + iio_push_event(indio_dev, + IIO_UNMOD_EVENT_CODE(IIO_ALTVOLTAGE, 0, + IIO_EV_TYPE_THRESH, + IIO_EV_DIR_RISING), + timestamp); + + /* Sine/cosine inputs exceed DOS mismatch threshold */ + if (FAULT_ONESHOT(AD2S1210_FAULT_DOS_MIS, flags, st->prev_fault_flags)) + iio_push_event(indio_dev, + IIO_UNMOD_EVENT_CODE(IIO_ALTVOLTAGE, 0, + IIO_EV_TYPE_MAG, + IIO_EV_DIR_RISING), + timestamp); + + /* Tracking error exceeds LOT threshold */ + if (FAULT_ONESHOT(AD2S1210_FAULT_LOT, flags, st->prev_fault_flags)) + iio_push_event(indio_dev, + IIO_UNMOD_EVENT_CODE(IIO_ANGL, 1, + IIO_EV_TYPE_THRESH, + IIO_EV_DIR_RISING), + timestamp); + + /* Velocity exceeds maximum tracking rate */ + if (FAULT_ONESHOT(AD2S1210_FAULT_VELOCITY, flags, st->prev_fault_flags)) + iio_push_event(indio_dev, + IIO_UNMOD_EVENT_CODE(IIO_ANGL_VEL, 0, + IIO_EV_TYPE_THRESH, + IIO_EV_DIR_RISING), + timestamp); + + /* Phase error exceeds phase lock range */ + if (FAULT_ONESHOT(AD2S1210_FAULT_PHASE, flags, st->prev_fault_flags)) + iio_push_event(indio_dev, + IIO_UNMOD_EVENT_CODE(IIO_PHASE, 0, + IIO_EV_TYPE_MAG, + IIO_EV_DIR_RISING), + timestamp); + + /* Configuration parity error */ + if (FAULT_ONESHOT(AD2S1210_FAULT_CONFIG_PARITY, flags, + st->prev_fault_flags)) + /* + * Userspace should also get notified of this via error return + * when trying to write to any attribute that writes a register. + */ + dev_err_ratelimited(&indio_dev->dev, + "Configuration parity error\n"); + + st->prev_fault_flags = flags; +} + +static int ad2s1210_single_conversion(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val) +{ + struct ad2s1210_state *st = iio_priv(indio_dev); + s64 timestamp; + int ret; + + guard(mutex)(&st->lock); + + ad2s1210_toggle_sample_line(st); + timestamp = iio_get_time_ns(indio_dev); + + switch (chan->type) { + case IIO_ANGL: + ret = ad2s1210_set_mode(st, MOD_POS); + break; + case IIO_ANGL_VEL: + ret = ad2s1210_set_mode(st, MOD_VEL); + break; + default: + return -EINVAL; + } + if (ret < 0) + return ret; + ret = spi_read(st->sdev, &st->sample, 3); + if (ret < 0) + return ret; + + switch (chan->type) { + case IIO_ANGL: + *val = be16_to_cpu(st->sample.raw); + ret = IIO_VAL_INT; + break; + case IIO_ANGL_VEL: + *val = (s16)be16_to_cpu(st->sample.raw); + ret = IIO_VAL_INT; + break; + default: + return -EINVAL; + } + + ad2s1210_push_events(indio_dev, st->sample.fault, timestamp); + + return ret; +} + +static int ad2s1210_get_hysteresis(struct ad2s1210_state *st, int *val) +{ + int ret; + + guard(mutex)(&st->lock); + ret = regmap_test_bits(st->regmap, AD2S1210_REG_CONTROL, + AD2S1210_ENABLE_HYSTERESIS); + if (ret < 0) + return ret; + + *val = ret << (2 * (AD2S1210_RES_16 - st->resolution)); + return IIO_VAL_INT; +} + +static int ad2s1210_set_hysteresis(struct ad2s1210_state *st, int val) +{ + guard(mutex)(&st->lock); + return regmap_update_bits(st->regmap, AD2S1210_REG_CONTROL, + AD2S1210_ENABLE_HYSTERESIS, + val ? AD2S1210_ENABLE_HYSTERESIS : 0); +} + +static int ad2s1210_get_phase_lock_range(struct ad2s1210_state *st, + int *val, int *val2) +{ + int ret; + + guard(mutex)(&st->lock); + ret = regmap_test_bits(st->regmap, AD2S1210_REG_CONTROL, + AD2S1210_PHASE_LOCK_RANGE_44); + if (ret < 0) + return ret; + + if (ret) { + /* 44 degrees as radians */ + *val = PHASE_44_DEG_TO_RAD_INT; + *val2 = PHASE_44_DEG_TO_RAD_MICRO; + } else { + /* 360 degrees as radians */ + *val = PHASE_360_DEG_TO_RAD_INT; + *val2 = PHASE_360_DEG_TO_RAD_MICRO; + } + + return IIO_VAL_INT_PLUS_MICRO; +} + +static int ad2s1210_set_phase_lock_range(struct ad2s1210_state *st, + int val, int val2) +{ + int deg; + + /* convert radians to degrees - only two allowable values */ + if (val == PHASE_44_DEG_TO_RAD_INT && val2 == PHASE_44_DEG_TO_RAD_MICRO) + deg = 44; + else if (val == PHASE_360_DEG_TO_RAD_INT && + val2 == PHASE_360_DEG_TO_RAD_MICRO) + deg = 360; + else + return -EINVAL; + + guard(mutex)(&st->lock); + return regmap_update_bits(st->regmap, AD2S1210_REG_CONTROL, + AD2S1210_PHASE_LOCK_RANGE_44, + deg == 44 ? AD2S1210_PHASE_LOCK_RANGE_44 : 0); +} + +/* map resolution to microradians/LSB for LOT registers */ +static const int ad2s1210_lot_threshold_urad_per_lsb[] = { + 6184, /* 10-bit: ~0.35 deg/LSB, 45 deg max */ + 2473, /* 12-bit: ~0.14 deg/LSB, 18 deg max */ + 1237, /* 14-bit: ~0.07 deg/LSB, 9 deg max */ + 1237, /* 16-bit: same as 14-bit */ +}; + +static int ad2s1210_get_voltage_threshold(struct ad2s1210_state *st, + unsigned int reg, int *val) +{ + unsigned int reg_val; + int ret; + + guard(mutex)(&st->lock); + ret = regmap_read(st->regmap, reg, ®_val); + if (ret < 0) + return ret; + + *val = reg_val * THRESHOLD_MILLIVOLT_PER_LSB; + return IIO_VAL_INT; +} + +static int ad2s1210_set_voltage_threshold(struct ad2s1210_state *st, + unsigned int reg, int val) +{ + unsigned int reg_val; + + reg_val = val / THRESHOLD_MILLIVOLT_PER_LSB; + + guard(mutex)(&st->lock); + return regmap_write(st->regmap, reg, reg_val); +} + +static int ad2s1210_get_lot_high_threshold(struct ad2s1210_state *st, + int *val, int *val2) +{ + unsigned int reg_val; + int ret; + + guard(mutex)(&st->lock); + ret = regmap_read(st->regmap, AD2S1210_REG_LOT_HIGH_THRD, ®_val); + if (ret < 0) + return ret; + + *val = 0; + *val2 = reg_val * ad2s1210_lot_threshold_urad_per_lsb[st->resolution]; + return IIO_VAL_INT_PLUS_MICRO; +} + +static int ad2s1210_set_lot_high_threshold(struct ad2s1210_state *st, + int val, int val2) +{ + unsigned int high_reg_val, low_reg_val, hysteresis; + int ret; + + /* all valid values are between 0 and pi/4 radians */ + if (val != 0) + return -EINVAL; + + guard(mutex)(&st->lock); + /* + * We need to read both high and low registers first so we can preserve + * the hysteresis. + */ + ret = regmap_read(st->regmap, AD2S1210_REG_LOT_HIGH_THRD, &high_reg_val); + if (ret < 0) + return ret; + + ret = regmap_read(st->regmap, AD2S1210_REG_LOT_LOW_THRD, &low_reg_val); + if (ret < 0) + return ret; + + hysteresis = high_reg_val - low_reg_val; + high_reg_val = val2 / ad2s1210_lot_threshold_urad_per_lsb[st->resolution]; + low_reg_val = high_reg_val - hysteresis; + + ret = regmap_write(st->regmap, AD2S1210_REG_LOT_HIGH_THRD, high_reg_val); + if (ret < 0) + return ret; + + return regmap_write(st->regmap, AD2S1210_REG_LOT_LOW_THRD, low_reg_val); +} + +static int ad2s1210_get_lot_low_threshold(struct ad2s1210_state *st, + int *val, int *val2) +{ + unsigned int high_reg_val, low_reg_val; + int ret; + + guard(mutex)(&st->lock); + + ret = regmap_read(st->regmap, AD2S1210_REG_LOT_HIGH_THRD, &high_reg_val); + if (ret < 0) + return ret; + + ret = regmap_read(st->regmap, AD2S1210_REG_LOT_LOW_THRD, &low_reg_val); + if (ret < 0) + return ret; + + /* sysfs value is hysteresis rather than actual low value */ + *val = 0; + *val2 = (high_reg_val - low_reg_val) * + ad2s1210_lot_threshold_urad_per_lsb[st->resolution]; + return IIO_VAL_INT_PLUS_MICRO; +} + +static int ad2s1210_set_lot_low_threshold(struct ad2s1210_state *st, + int val, int val2) +{ + unsigned int reg_val, hysteresis; + int ret; + + /* all valid values are between 0 and pi/4 radians */ + if (val != 0) + return -EINVAL; + + hysteresis = val2 / ad2s1210_lot_threshold_urad_per_lsb[st->resolution]; + + guard(mutex)(&st->lock); + + ret = regmap_read(st->regmap, AD2S1210_REG_LOT_HIGH_THRD, ®_val); + if (ret < 0) + return ret; + + return regmap_write(st->regmap, AD2S1210_REG_LOT_LOW_THRD, + reg_val - hysteresis); +} + +static int ad2s1210_get_excitation_frequency(struct ad2s1210_state *st, int *val) +{ + unsigned int reg_val; + int ret; + + guard(mutex)(&st->lock); + + ret = regmap_read(st->regmap, AD2S1210_REG_EXCIT_FREQ, ®_val); + if (ret < 0) + return ret; + + *val = reg_val * st->clkin_hz / (1 << 15); + return IIO_VAL_INT; +} + +static int ad2s1210_set_excitation_frequency(struct ad2s1210_state *st, int val) +{ + if (val < AD2S1210_MIN_EXCIT || val > AD2S1210_MAX_EXCIT) + return -EINVAL; + + guard(mutex)(&st->lock); + return ad2s1210_reinit_excitation_frequency(st, val); +} + +static const int ad2s1210_velocity_scale[] = { + 17089132, /* 8.192MHz / (2*pi * 2500 / 2^15) */ + 42722830, /* 8.192MHz / (2*pi * 1000 / 2^15) */ + 85445659, /* 8.192MHz / (2*pi * 500 / 2^15) */ + 341782638, /* 8.192MHz / (2*pi * 125 / 2^15) */ +}; + +static int ad2s1210_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long mask) +{ + struct ad2s1210_state *st = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + return ad2s1210_single_conversion(indio_dev, chan, val); + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_ANGL: + /* approx 0.3 arc min converted to radians */ + *val = 0; + *val2 = 95874; + return IIO_VAL_INT_PLUS_NANO; + case IIO_ANGL_VEL: + *val = st->clkin_hz; + *val2 = ad2s1210_velocity_scale[st->resolution]; + return IIO_VAL_FRACTIONAL; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_FREQUENCY: + switch (chan->type) { + case IIO_ALTVOLTAGE: + return ad2s1210_get_excitation_frequency(st, val); + default: + return -EINVAL; + } + case IIO_CHAN_INFO_HYSTERESIS: + switch (chan->type) { + case IIO_ANGL: + return ad2s1210_get_hysteresis(st, val); + default: + return -EINVAL; + } + default: + return -EINVAL; + } +} + +static int ad2s1210_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, + int *length, long mask) +{ + static const int excitation_frequency_available[] = { + AD2S1210_MIN_EXCIT, + 250, /* step */ + AD2S1210_MAX_EXCIT, + }; + + struct ad2s1210_state *st = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_FREQUENCY: + switch (chan->type) { + case IIO_ALTVOLTAGE: + *type = IIO_VAL_INT; + *vals = excitation_frequency_available; + return IIO_AVAIL_RANGE; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_HYSTERESIS: + switch (chan->type) { + case IIO_ANGL: + *vals = st->hysteresis_available; + *type = IIO_VAL_INT; + *length = ARRAY_SIZE(st->hysteresis_available); + return IIO_AVAIL_LIST; + default: + return -EINVAL; + } + default: + return -EINVAL; + } +} + +static int ad2s1210_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct ad2s1210_state *st = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_FREQUENCY: + switch (chan->type) { + case IIO_ALTVOLTAGE: + return ad2s1210_set_excitation_frequency(st, val); + default: + return -EINVAL; + } + case IIO_CHAN_INFO_HYSTERESIS: + switch (chan->type) { + case IIO_ANGL: + return ad2s1210_set_hysteresis(st, val); + default: + return -EINVAL; + } + default: + return -EINVAL; + } +} + +static const struct iio_event_spec ad2s1210_position_event_spec[] = { + { + /* Tracking error exceeds LOT threshold fault. */ + .type = IIO_EV_TYPE_THRESH, + .dir = IIO_EV_DIR_RISING, + .mask_separate = + /* Loss of tracking high threshold. */ + BIT(IIO_EV_INFO_VALUE) | + /* Loss of tracking low threshold. */ + BIT(IIO_EV_INFO_HYSTERESIS), + }, +}; + +static const struct iio_event_spec ad2s1210_velocity_event_spec[] = { + { + /* Velocity exceeds maximum tracking rate fault. */ + .type = IIO_EV_TYPE_MAG, + .dir = IIO_EV_DIR_RISING, + }, +}; + +static const struct iio_event_spec ad2s1210_phase_event_spec[] = { + { + /* Phase error fault. */ + .type = IIO_EV_TYPE_MAG, + .dir = IIO_EV_DIR_RISING, + /* Phase lock range. */ + .mask_separate = BIT(IIO_EV_INFO_VALUE), + }, +}; + +static const struct iio_event_spec ad2s1210_monitor_signal_event_spec[] = { + { + /* Sine/cosine below LOS threshold fault. */ + .type = IIO_EV_TYPE_THRESH, + .dir = IIO_EV_DIR_FALLING, + /* Loss of signal threshold. */ + .mask_separate = BIT(IIO_EV_INFO_VALUE), + }, + { + /* Sine/cosine DOS overrange fault.*/ + .type = IIO_EV_TYPE_THRESH, + .dir = IIO_EV_DIR_RISING, + /* Degredation of signal overrange threshold. */ + .mask_separate = BIT(IIO_EV_INFO_VALUE), + }, + { + /* Sine/cosine DOS mismatch fault.*/ + .type = IIO_EV_TYPE_MAG, + .dir = IIO_EV_DIR_RISING, + .mask_separate = BIT(IIO_EV_INFO_VALUE), + }, +}; + +static const struct iio_event_spec ad2s1210_sin_cos_event_spec[] = { + { + /* Sine/cosine clipping fault. */ + .type = IIO_EV_TYPE_MAG, + .dir = IIO_EV_DIR_EITHER, + }, +}; + +static const struct iio_chan_spec ad2s1210_channels[] = { + { + .type = IIO_ANGL, + .indexed = 1, + .channel = 0, + .scan_index = 0, + .scan_type = { + .sign = 'u', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_BE, + }, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_HYSTERESIS), + .info_mask_separate_available = + BIT(IIO_CHAN_INFO_HYSTERESIS), + }, { + .type = IIO_ANGL_VEL, + .indexed = 1, + .channel = 0, + .scan_index = 1, + .scan_type = { + .sign = 's', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_BE, + }, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .event_spec = ad2s1210_velocity_event_spec, + .num_event_specs = ARRAY_SIZE(ad2s1210_velocity_event_spec), + }, + IIO_CHAN_SOFT_TIMESTAMP(2), + { + /* used to configure LOT thresholds and get tracking error */ + .type = IIO_ANGL, + .indexed = 1, + .channel = 1, + .scan_index = -1, + .event_spec = ad2s1210_position_event_spec, + .num_event_specs = ARRAY_SIZE(ad2s1210_position_event_spec), + }, + { + /* used to configure phase lock range and get phase lock error */ + .type = IIO_PHASE, + .indexed = 1, + .channel = 0, + .scan_index = -1, + .event_spec = ad2s1210_phase_event_spec, + .num_event_specs = ARRAY_SIZE(ad2s1210_phase_event_spec), + }, { + /* excitation frequency output */ + .type = IIO_ALTVOLTAGE, + .indexed = 1, + .channel = 0, + .output = 1, + .scan_index = -1, + .info_mask_separate = BIT(IIO_CHAN_INFO_FREQUENCY), + .info_mask_separate_available = BIT(IIO_CHAN_INFO_FREQUENCY), + }, { + /* monitor signal */ + .type = IIO_ALTVOLTAGE, + .indexed = 1, + .channel = 0, + .scan_index = -1, + .event_spec = ad2s1210_monitor_signal_event_spec, + .num_event_specs = ARRAY_SIZE(ad2s1210_monitor_signal_event_spec), + }, { + /* sine input */ + .type = IIO_ALTVOLTAGE, + .indexed = 1, + .channel = 1, + .scan_index = -1, + .event_spec = ad2s1210_sin_cos_event_spec, + .num_event_specs = ARRAY_SIZE(ad2s1210_sin_cos_event_spec), + }, { + /* cosine input */ + .type = IIO_ALTVOLTAGE, + .indexed = 1, + .channel = 2, + .scan_index = -1, + .event_spec = ad2s1210_sin_cos_event_spec, + .num_event_specs = ARRAY_SIZE(ad2s1210_sin_cos_event_spec), + }, +}; + +static ssize_t event_attr_voltage_reg_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev)); + struct iio_dev_attr *iattr = to_iio_dev_attr(attr); + unsigned int value; + int ret; + + guard(mutex)(&st->lock); + ret = regmap_read(st->regmap, iattr->address, &value); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", value * THRESHOLD_MILLIVOLT_PER_LSB); +} + +static ssize_t event_attr_voltage_reg_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev)); + struct iio_dev_attr *iattr = to_iio_dev_attr(attr); + u16 data; + int ret; + + ret = kstrtou16(buf, 10, &data); + if (ret) + return -EINVAL; + + guard(mutex)(&st->lock); + ret = regmap_write(st->regmap, iattr->address, + data / THRESHOLD_MILLIVOLT_PER_LSB); + if (ret < 0) + return ret; + + return len; +} + +static ssize_t +in_angl1_thresh_rising_value_available_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev)); + int step = ad2s1210_lot_threshold_urad_per_lsb[st->resolution]; + + return sysfs_emit(buf, "[0 0.%06d 0.%06d]\n", step, step * 0x7F); +} + +static ssize_t +in_angl1_thresh_rising_hysteresis_available_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev)); + int step = ad2s1210_lot_threshold_urad_per_lsb[st->resolution]; + + return sysfs_emit(buf, "[0 0.%06d 0.%06d]\n", step, step * 0x7F); +} + +static IIO_CONST_ATTR(in_phase0_mag_rising_value_available, + __stringify(PHASE_44_DEG_TO_RAD_INT) "." + __stringify(PHASE_44_DEG_TO_RAD_MICRO) " " + __stringify(PHASE_360_DEG_TO_RAD_INT) "." + __stringify(PHASE_360_DEG_TO_RAD_MICRO)); +static IIO_CONST_ATTR(in_altvoltage0_thresh_falling_value_available, + THRESHOLD_RANGE_STR); +static IIO_CONST_ATTR(in_altvoltage0_thresh_rising_value_available, + THRESHOLD_RANGE_STR); +static IIO_CONST_ATTR(in_altvoltage0_mag_rising_value_available, + THRESHOLD_RANGE_STR); +static IIO_DEVICE_ATTR(in_altvoltage0_mag_rising_reset_max, 0644, + event_attr_voltage_reg_show, event_attr_voltage_reg_store, + AD2S1210_REG_DOS_RST_MAX_THRD); +static IIO_CONST_ATTR(in_altvoltage0_mag_rising_reset_max_available, THRESHOLD_RANGE_STR); +static IIO_DEVICE_ATTR(in_altvoltage0_mag_rising_reset_min, 0644, + event_attr_voltage_reg_show, event_attr_voltage_reg_store, + AD2S1210_REG_DOS_RST_MIN_THRD); +static IIO_CONST_ATTR(in_altvoltage0_mag_rising_reset_min_available, THRESHOLD_RANGE_STR); +static IIO_DEVICE_ATTR_RO(in_angl1_thresh_rising_value_available, 0); +static IIO_DEVICE_ATTR_RO(in_angl1_thresh_rising_hysteresis_available, 0); + +static struct attribute *ad2s1210_event_attributes[] = { + &iio_const_attr_in_phase0_mag_rising_value_available.dev_attr.attr, + &iio_const_attr_in_altvoltage0_thresh_falling_value_available.dev_attr.attr, + &iio_const_attr_in_altvoltage0_thresh_rising_value_available.dev_attr.attr, + &iio_const_attr_in_altvoltage0_mag_rising_value_available.dev_attr.attr, + &iio_dev_attr_in_altvoltage0_mag_rising_reset_max.dev_attr.attr, + &iio_const_attr_in_altvoltage0_mag_rising_reset_max_available.dev_attr.attr, + &iio_dev_attr_in_altvoltage0_mag_rising_reset_min.dev_attr.attr, + &iio_const_attr_in_altvoltage0_mag_rising_reset_min_available.dev_attr.attr, + &iio_dev_attr_in_angl1_thresh_rising_value_available.dev_attr.attr, + &iio_dev_attr_in_angl1_thresh_rising_hysteresis_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group ad2s1210_event_attribute_group = { + .attrs = ad2s1210_event_attributes, +}; + +static int ad2s1210_initial(struct ad2s1210_state *st) +{ + unsigned int data; + int ret; + + guard(mutex)(&st->lock); + + /* Use default config register value plus resolution from devicetree. */ + data = FIELD_PREP(AD2S1210_PHASE_LOCK_RANGE_44, 1); + data |= FIELD_PREP(AD2S1210_ENABLE_HYSTERESIS, 1); + data |= FIELD_PREP(AD2S1210_SET_ENRES, 0x3); + data |= FIELD_PREP(AD2S1210_SET_RES, st->resolution); + + ret = regmap_write(st->regmap, AD2S1210_REG_CONTROL, data); + if (ret < 0) + return ret; + + return ad2s1210_reinit_excitation_frequency(st, AD2S1210_DEF_EXCIT); +} + +static int ad2s1210_read_label(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + char *label) +{ + if (chan->type == IIO_ANGL) { + if (chan->channel == 0) + return sprintf(label, "position\n"); + if (chan->channel == 1) + return sprintf(label, "tracking error\n"); + } + if (chan->type == IIO_ANGL_VEL) + return sprintf(label, "velocity\n"); + if (chan->type == IIO_PHASE) + return sprintf(label, "synthetic reference\n"); + if (chan->type == IIO_ALTVOLTAGE) { + if (chan->output) + return sprintf(label, "excitation\n"); + if (chan->channel == 0) + return sprintf(label, "monitor signal\n"); + if (chan->channel == 1) + return sprintf(label, "cosine\n"); + if (chan->channel == 2) + return sprintf(label, "sine\n"); + } + + return -EINVAL; +} + +static int ad2s1210_read_event_value(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, + int *val, int *val2) +{ + struct ad2s1210_state *st = iio_priv(indio_dev); + + switch (chan->type) { + case IIO_ANGL: + switch (info) { + case IIO_EV_INFO_VALUE: + return ad2s1210_get_lot_high_threshold(st, val, val2); + case IIO_EV_INFO_HYSTERESIS: + return ad2s1210_get_lot_low_threshold(st, val, val2); + default: + return -EINVAL; + } + case IIO_ALTVOLTAGE: + if (chan->output) + return -EINVAL; + if (type == IIO_EV_TYPE_THRESH && dir == IIO_EV_DIR_FALLING) + return ad2s1210_get_voltage_threshold(st, + AD2S1210_REG_LOS_THRD, val); + if (type == IIO_EV_TYPE_THRESH && dir == IIO_EV_DIR_RISING) + return ad2s1210_get_voltage_threshold(st, + AD2S1210_REG_DOS_OVR_THRD, val); + if (type == IIO_EV_TYPE_MAG) + return ad2s1210_get_voltage_threshold(st, + AD2S1210_REG_DOS_MIS_THRD, val); + return -EINVAL; + case IIO_PHASE: + return ad2s1210_get_phase_lock_range(st, val, val2); + default: + return -EINVAL; + } +} + +static int ad2s1210_write_event_value(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, + int val, int val2) +{ + struct ad2s1210_state *st = iio_priv(indio_dev); + + switch (chan->type) { + case IIO_ANGL: + switch (info) { + case IIO_EV_INFO_VALUE: + return ad2s1210_set_lot_high_threshold(st, val, val2); + case IIO_EV_INFO_HYSTERESIS: + return ad2s1210_set_lot_low_threshold(st, val, val2); + default: + return -EINVAL; + } + case IIO_ALTVOLTAGE: + if (chan->output) + return -EINVAL; + if (type == IIO_EV_TYPE_THRESH && dir == IIO_EV_DIR_FALLING) + return ad2s1210_set_voltage_threshold(st, + AD2S1210_REG_LOS_THRD, val); + if (type == IIO_EV_TYPE_THRESH && dir == IIO_EV_DIR_RISING) + return ad2s1210_set_voltage_threshold(st, + AD2S1210_REG_DOS_OVR_THRD, val); + if (type == IIO_EV_TYPE_MAG) + return ad2s1210_set_voltage_threshold(st, + AD2S1210_REG_DOS_MIS_THRD, val); + return -EINVAL; + case IIO_PHASE: + return ad2s1210_set_phase_lock_range(st, val, val2); + default: + return -EINVAL; + } +} + +static int ad2s1210_read_event_label(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + enum iio_event_type type, + enum iio_event_direction dir, + char *label) +{ + if (chan->type == IIO_ANGL) + return sprintf(label, "LOT\n"); + if (chan->type == IIO_ANGL_VEL) + return sprintf(label, "max tracking rate\n"); + if (chan->type == IIO_PHASE) + return sprintf(label, "phase lock\n"); + if (chan->type == IIO_ALTVOLTAGE) { + if (chan->channel == 0) { + if (type == IIO_EV_TYPE_THRESH && + dir == IIO_EV_DIR_FALLING) + return sprintf(label, "LOS\n"); + if (type == IIO_EV_TYPE_THRESH && + dir == IIO_EV_DIR_RISING) + return sprintf(label, "DOS overrange\n"); + if (type == IIO_EV_TYPE_MAG) + return sprintf(label, "DOS mismatch\n"); + } + if (chan->channel == 1 || chan->channel == 2) + return sprintf(label, "clipped\n"); + } + + return -EINVAL; +} + +static int ad2s1210_debugfs_reg_access(struct iio_dev *indio_dev, + unsigned int reg, unsigned int writeval, + unsigned int *readval) +{ + struct ad2s1210_state *st = iio_priv(indio_dev); + + guard(mutex)(&st->lock); + + if (readval) + return regmap_read(st->regmap, reg, readval); + + return regmap_write(st->regmap, reg, writeval); +} + +static irqreturn_t ad2s1210_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct ad2s1210_state *st = iio_priv(indio_dev); + size_t chan = 0; + int ret; + + guard(mutex)(&st->lock); + + memset(&st->scan, 0, sizeof(st->scan)); + ad2s1210_toggle_sample_line(st); + + if (test_bit(0, indio_dev->active_scan_mask)) { + ret = ad2s1210_set_mode(st, MOD_POS); + if (ret < 0) + goto error_ret; + + ret = spi_read(st->sdev, &st->sample, 3); + if (ret < 0) + goto error_ret; + + memcpy(&st->scan.chan[chan++], &st->sample.raw, 2); + } + + if (test_bit(1, indio_dev->active_scan_mask)) { + ret = ad2s1210_set_mode(st, MOD_VEL); + if (ret < 0) + goto error_ret; + + ret = spi_read(st->sdev, &st->sample, 3); + if (ret < 0) + goto error_ret; + + memcpy(&st->scan.chan[chan++], &st->sample.raw, 2); + } + + ad2s1210_push_events(indio_dev, st->sample.fault, pf->timestamp); + iio_push_to_buffers_with_timestamp(indio_dev, &st->scan, pf->timestamp); + +error_ret: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static const struct iio_info ad2s1210_info = { + .event_attrs = &ad2s1210_event_attribute_group, + .read_raw = ad2s1210_read_raw, + .read_avail = ad2s1210_read_avail, + .write_raw = ad2s1210_write_raw, + .read_label = ad2s1210_read_label, + .read_event_value = ad2s1210_read_event_value, + .write_event_value = ad2s1210_write_event_value, + .read_event_label = ad2s1210_read_event_label, + .debugfs_reg_access = &ad2s1210_debugfs_reg_access, +}; + +static int ad2s1210_setup_properties(struct ad2s1210_state *st) +{ + struct device *dev = &st->sdev->dev; + u32 val; + int ret; + + ret = device_property_read_u32(dev, "assigned-resolution-bits", &val); + if (ret < 0) + return dev_err_probe(dev, ret, + "failed to read assigned-resolution-bits property\n"); + + if (val < 10 || val > 16) + return dev_err_probe(dev, -EINVAL, + "resolution out of range: %u\n", val); + + st->resolution = (val - 10) >> 1; + /* + * These are values that correlate to the hysteresis bit in the Control + * register. 0 = disabled, 1 = enabled. When enabled, the actual + * hysteresis is +/- 1 LSB of the raw position value. Which bit is the + * LSB depends on the specified resolution. + */ + st->hysteresis_available[0] = 0; + st->hysteresis_available[1] = 1 << (2 * (AD2S1210_RES_16 - + st->resolution)); + + return 0; +} + +static int ad2s1210_setup_clocks(struct ad2s1210_state *st) +{ + struct device *dev = &st->sdev->dev; + struct clk *clk; + + clk = devm_clk_get_enabled(dev, NULL); + if (IS_ERR(clk)) + return dev_err_probe(dev, PTR_ERR(clk), "failed to get clock\n"); + + st->clkin_hz = clk_get_rate(clk); + if (st->clkin_hz < AD2S1210_MIN_CLKIN || st->clkin_hz > AD2S1210_MAX_CLKIN) + return dev_err_probe(dev, -EINVAL, + "clock frequency out of range: %lu\n", + st->clkin_hz); + + return 0; +} + +static int ad2s1210_setup_gpios(struct ad2s1210_state *st) +{ + struct device *dev = &st->sdev->dev; + struct gpio_descs *resolution_gpios; + DECLARE_BITMAP(bitmap, 2); + int ret; + + /* should not be sampling on startup */ + st->sample_gpio = devm_gpiod_get(dev, "sample", GPIOD_OUT_LOW); + if (IS_ERR(st->sample_gpio)) + return dev_err_probe(dev, PTR_ERR(st->sample_gpio), + "failed to request sample GPIO\n"); + + /* both pins high means that we start in config mode */ + st->mode_gpios = devm_gpiod_get_array(dev, "mode", GPIOD_OUT_HIGH); + if (IS_ERR(st->mode_gpios)) + return dev_err_probe(dev, PTR_ERR(st->mode_gpios), + "failed to request mode GPIOs\n"); + + if (st->mode_gpios->ndescs != 2) + return dev_err_probe(dev, -EINVAL, + "requires exactly 2 mode-gpios\n"); + + /* + * If resolution gpios are provided, they get set to the required + * resolution, otherwise it is assumed the RES0 and RES1 pins are + * hard-wired to match the resolution indicated in the devicetree. + */ + resolution_gpios = devm_gpiod_get_array_optional(dev, "resolution", + GPIOD_ASIS); + if (IS_ERR(resolution_gpios)) + return dev_err_probe(dev, PTR_ERR(resolution_gpios), + "failed to request resolution GPIOs\n"); + + if (resolution_gpios) { + if (resolution_gpios->ndescs != 2) + return dev_err_probe(dev, -EINVAL, + "requires exactly 2 resolution-gpios\n"); + + bitmap[0] = st->resolution; + + ret = gpiod_set_array_value(resolution_gpios->ndescs, + resolution_gpios->desc, + resolution_gpios->info, + bitmap); + if (ret < 0) + return dev_err_probe(dev, ret, + "failed to set resolution gpios\n"); + } + + return 0; +} + +static const struct regmap_range ad2s1210_regmap_readable_ranges[] = { + regmap_reg_range(AD2S1210_REG_POSITION_MSB, AD2S1210_REG_VELOCITY_LSB), + regmap_reg_range(AD2S1210_REG_LOS_THRD, AD2S1210_REG_LOT_LOW_THRD), + regmap_reg_range(AD2S1210_REG_EXCIT_FREQ, AD2S1210_REG_CONTROL), + regmap_reg_range(AD2S1210_REG_FAULT, AD2S1210_REG_FAULT), +}; + +static const struct regmap_access_table ad2s1210_regmap_rd_table = { + .yes_ranges = ad2s1210_regmap_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(ad2s1210_regmap_readable_ranges), +}; + +static const struct regmap_range ad2s1210_regmap_writeable_ranges[] = { + regmap_reg_range(AD2S1210_REG_LOS_THRD, AD2S1210_REG_LOT_LOW_THRD), + regmap_reg_range(AD2S1210_REG_EXCIT_FREQ, AD2S1210_REG_CONTROL), + regmap_reg_range(AD2S1210_REG_SOFT_RESET, AD2S1210_REG_SOFT_RESET), + regmap_reg_range(AD2S1210_REG_FAULT, AD2S1210_REG_FAULT), +}; + +static const struct regmap_access_table ad2s1210_regmap_wr_table = { + .yes_ranges = ad2s1210_regmap_writeable_ranges, + .n_yes_ranges = ARRAY_SIZE(ad2s1210_regmap_writeable_ranges), +}; + +static int ad2s1210_setup_regmap(struct ad2s1210_state *st) +{ + struct device *dev = &st->sdev->dev; + const struct regmap_config config = { + .reg_bits = 8, + .val_bits = 8, + .disable_locking = true, + .reg_read = ad2s1210_regmap_reg_read, + .reg_write = ad2s1210_regmap_reg_write, + .rd_table = &ad2s1210_regmap_rd_table, + .wr_table = &ad2s1210_regmap_wr_table, + .can_sleep = true, + }; + + st->regmap = devm_regmap_init(dev, NULL, st, &config); + if (IS_ERR(st->regmap)) + return dev_err_probe(dev, PTR_ERR(st->regmap), + "failed to allocate register map\n"); + + return 0; +} + +static int ad2s1210_probe(struct spi_device *spi) +{ + struct iio_dev *indio_dev; + struct ad2s1210_state *st; + int ret; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + st = iio_priv(indio_dev); + + mutex_init(&st->lock); + st->sdev = spi; + + ret = ad2s1210_setup_properties(st); + if (ret < 0) + return ret; + + ret = ad2s1210_setup_clocks(st); + if (ret < 0) + return ret; + + ret = ad2s1210_setup_gpios(st); + if (ret < 0) + return ret; + + ret = ad2s1210_setup_regmap(st); + if (ret < 0) + return ret; + + ret = ad2s1210_initial(st); + if (ret < 0) + return ret; + + indio_dev->info = &ad2s1210_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = ad2s1210_channels; + indio_dev->num_channels = ARRAY_SIZE(ad2s1210_channels); + indio_dev->name = spi_get_device_id(spi)->name; + + ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev, + &iio_pollfunc_store_time, + &ad2s1210_trigger_handler, NULL); + if (ret < 0) + return dev_err_probe(&spi->dev, ret, + "iio triggered buffer setup failed\n"); + + return devm_iio_device_register(&spi->dev, indio_dev); +} + +static const struct of_device_id ad2s1210_of_match[] = { + { .compatible = "adi,ad2s1210", }, + { } +}; +MODULE_DEVICE_TABLE(of, ad2s1210_of_match); + +static const struct spi_device_id ad2s1210_id[] = { + { "ad2s1210" }, + {} +}; +MODULE_DEVICE_TABLE(spi, ad2s1210_id); + +static struct spi_driver ad2s1210_driver = { + .driver = { + .name = "ad2s1210", + .of_match_table = ad2s1210_of_match, + }, + .probe = ad2s1210_probe, + .id_table = ad2s1210_id, +}; +module_spi_driver(ad2s1210_driver); + +MODULE_AUTHOR("Graff Yang <graff.yang@gmail.com>"); +MODULE_DESCRIPTION("Analog Devices AD2S1210 Resolver to Digital SPI driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/temperature/hid-sensor-temperature.c b/drivers/iio/temperature/hid-sensor-temperature.c index d40f235af1d4..0143fd478933 100644 --- a/drivers/iio/temperature/hid-sensor-temperature.c +++ b/drivers/iio/temperature/hid-sensor-temperature.c @@ -257,7 +257,7 @@ error_remove_trigger: } /* Function to deinitialize the processing for usage id */ -static int hid_temperature_remove(struct platform_device *pdev) +static void hid_temperature_remove(struct platform_device *pdev) { struct hid_sensor_hub_device *hsdev = dev_get_platdata(&pdev->dev); struct iio_dev *indio_dev = platform_get_drvdata(pdev); @@ -265,8 +265,6 @@ static int hid_temperature_remove(struct platform_device *pdev) sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_TEMPERATURE); hid_sensor_remove_trigger(indio_dev, &temp_st->common_attributes); - - return 0; } static const struct platform_device_id hid_temperature_ids[] = { @@ -285,7 +283,7 @@ static struct platform_driver hid_temperature_platform_driver = { .pm = &hid_sensor_pm_ops, }, .probe = hid_temperature_probe, - .remove = hid_temperature_remove, + .remove_new = hid_temperature_remove, }; module_platform_driver(hid_temperature_platform_driver); diff --git a/drivers/iio/temperature/mlx90614.c b/drivers/iio/temperature/mlx90614.c index 07bb5df24ab3..740018d4b3df 100644 --- a/drivers/iio/temperature/mlx90614.c +++ b/drivers/iio/temperature/mlx90614.c @@ -600,7 +600,7 @@ static int mlx90614_probe(struct i2c_client *client) data->client = client; mutex_init(&data->lock); data->wakeup_gpio = mlx90614_probe_wakeup(client); - data->chip_info = device_get_match_data(&client->dev); + data->chip_info = i2c_get_match_data(client); mlx90614_wakeup(data); diff --git a/drivers/iio/temperature/tmp117.c b/drivers/iio/temperature/tmp117.c index fc02f491688b..059953015ae7 100644 --- a/drivers/iio/temperature/tmp117.c +++ b/drivers/iio/temperature/tmp117.c @@ -42,6 +42,12 @@ struct tmp117_data { s16 calibbias; }; +struct tmp11x_info { + const char *name; + struct iio_chan_spec const *channels; + int num_channels; +}; + static int tmp117_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *channel, int *val, int *val2, long mask) @@ -119,57 +125,54 @@ static const struct iio_chan_spec tmp116_channels[] = { }, }; +static const struct tmp11x_info tmp116_channels_info = { + .name = "tmp116", + .channels = tmp116_channels, + .num_channels = ARRAY_SIZE(tmp116_channels) +}; + +static const struct tmp11x_info tmp117_channels_info = { + .name = "tmp117", + .channels = tmp117_channels, + .num_channels = ARRAY_SIZE(tmp117_channels) +}; + static const struct iio_info tmp117_info = { .read_raw = tmp117_read_raw, .write_raw = tmp117_write_raw, }; -static int tmp117_identify(struct i2c_client *client) +static int tmp117_probe(struct i2c_client *client) { - const struct i2c_device_id *id; - unsigned long match_data; + const struct tmp11x_info *match_data; + struct tmp117_data *data; + struct iio_dev *indio_dev; int dev_id; + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) + return -EOPNOTSUPP; + dev_id = i2c_smbus_read_word_swapped(client, TMP117_REG_DEVICE_ID); if (dev_id < 0) return dev_id; switch (dev_id) { case TMP116_DEVICE_ID: + match_data = &tmp116_channels_info; + break; case TMP117_DEVICE_ID: - return dev_id; + match_data = &tmp117_channels_info; + break; + default: + dev_info(&client->dev, + "Unknown device id (0x%x), use fallback compatible\n", + dev_id); + match_data = i2c_get_match_data(client); } - dev_info(&client->dev, "Unknown device id (0x%x), use fallback compatible\n", - dev_id); - - match_data = (uintptr_t)device_get_match_data(&client->dev); - if (match_data) - return match_data; - - id = i2c_client_get_device_id(client); - if (id) - return id->driver_data; - - dev_err(&client->dev, "Failed to identify unsupported device\n"); - - return -ENODEV; -} - -static int tmp117_probe(struct i2c_client *client) -{ - struct tmp117_data *data; - struct iio_dev *indio_dev; - int ret, dev_id; - - if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) - return -EOPNOTSUPP; - - ret = tmp117_identify(client); - if (ret < 0) - return ret; - - dev_id = ret; + if (!match_data) + return dev_err_probe(&client->dev, -ENODEV, + "Failed to identify unsupported device\n"); indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); if (!indio_dev) @@ -181,33 +184,24 @@ static int tmp117_probe(struct i2c_client *client) indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &tmp117_info; + indio_dev->channels = match_data->channels; + indio_dev->num_channels = match_data->num_channels; + indio_dev->name = match_data->name; - switch (dev_id) { - case TMP116_DEVICE_ID: - indio_dev->channels = tmp116_channels; - indio_dev->num_channels = ARRAY_SIZE(tmp116_channels); - indio_dev->name = "tmp116"; - break; - case TMP117_DEVICE_ID: - indio_dev->channels = tmp117_channels; - indio_dev->num_channels = ARRAY_SIZE(tmp117_channels); - indio_dev->name = "tmp117"; - break; - } return devm_iio_device_register(&client->dev, indio_dev); } static const struct of_device_id tmp117_of_match[] = { - { .compatible = "ti,tmp116", .data = (void *)TMP116_DEVICE_ID }, - { .compatible = "ti,tmp117", .data = (void *)TMP117_DEVICE_ID }, + { .compatible = "ti,tmp116", .data = &tmp116_channels_info }, + { .compatible = "ti,tmp117", .data = &tmp117_channels_info }, { } }; MODULE_DEVICE_TABLE(of, tmp117_of_match); static const struct i2c_device_id tmp117_id[] = { - { "tmp116", TMP116_DEVICE_ID }, - { "tmp117", TMP117_DEVICE_ID }, + { "tmp116", (kernel_ulong_t)&tmp116_channels_info }, + { "tmp117", (kernel_ulong_t)&tmp117_channels_info }, { } }; MODULE_DEVICE_TABLE(i2c, tmp117_id); diff --git a/drivers/iio/trigger/iio-trig-interrupt.c b/drivers/iio/trigger/iio-trig-interrupt.c index 5f49cd105fae..dec256bfbd73 100644 --- a/drivers/iio/trigger/iio-trig-interrupt.c +++ b/drivers/iio/trigger/iio-trig-interrupt.c @@ -81,7 +81,7 @@ error_ret: return ret; } -static int iio_interrupt_trigger_remove(struct platform_device *pdev) +static void iio_interrupt_trigger_remove(struct platform_device *pdev) { struct iio_trigger *trig; struct iio_interrupt_trigger_info *trig_info; @@ -92,13 +92,11 @@ static int iio_interrupt_trigger_remove(struct platform_device *pdev) free_irq(trig_info->irq, trig); kfree(trig_info); iio_trigger_free(trig); - - return 0; } static struct platform_driver iio_interrupt_trigger_driver = { .probe = iio_interrupt_trigger_probe, - .remove = iio_interrupt_trigger_remove, + .remove_new = iio_interrupt_trigger_remove, .driver = { .name = "iio_interrupt_trigger", }, diff --git a/drivers/iio/trigger/stm32-timer-trigger.c b/drivers/iio/trigger/stm32-timer-trigger.c index 3643c4afae67..d76444030a28 100644 --- a/drivers/iio/trigger/stm32-timer-trigger.c +++ b/drivers/iio/trigger/stm32-timer-trigger.c @@ -809,7 +809,7 @@ static int stm32_timer_trigger_probe(struct platform_device *pdev) return 0; } -static int stm32_timer_trigger_remove(struct platform_device *pdev) +static void stm32_timer_trigger_remove(struct platform_device *pdev) { struct stm32_timer_trigger *priv = platform_get_drvdata(pdev); u32 val; @@ -824,8 +824,6 @@ static int stm32_timer_trigger_remove(struct platform_device *pdev) if (priv->enabled) clk_disable(priv->clk); - - return 0; } static int stm32_timer_trigger_suspend(struct device *dev) @@ -904,7 +902,7 @@ MODULE_DEVICE_TABLE(of, stm32_trig_of_match); static struct platform_driver stm32_timer_trigger_driver = { .probe = stm32_timer_trigger_probe, - .remove = stm32_timer_trigger_remove, + .remove_new = stm32_timer_trigger_remove, .driver = { .name = "stm32-timer-trigger", .of_match_table = stm32_trig_of_match, diff --git a/drivers/interconnect/imx/imx.h b/drivers/interconnect/imx/imx.h index 895907cdcb3b..d4d0e9888655 100644 --- a/drivers/interconnect/imx/imx.h +++ b/drivers/interconnect/imx/imx.h @@ -10,8 +10,13 @@ #ifndef __DRIVERS_INTERCONNECT_IMX_H #define __DRIVERS_INTERCONNECT_IMX_H +#include <linux/args.h> +#include <linux/bits.h> +#include <linux/types.h> + #include <linux/interconnect-provider.h> -#include <linux/kernel.h> + +struct platform_device; #define IMX_ICC_MAX_LINKS 4 @@ -89,7 +94,7 @@ struct imx_icc_noc_setting { .id = _id, \ .name = _name, \ .adj = _adj, \ - .num_links = ARRAY_SIZE(((int[]){ __VA_ARGS__ })), \ + .num_links = COUNT_ARGS(__VA_ARGS__), \ .links = { __VA_ARGS__ }, \ } diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig index 825b647d9169..62b516d38d03 100644 --- a/drivers/interconnect/qcom/Kconfig +++ b/drivers/interconnect/qcom/Kconfig @@ -182,6 +182,15 @@ config INTERCONNECT_QCOM_SDX65 This is a driver for the Qualcomm Network-on-Chip on sdx65-based platforms. +config INTERCONNECT_QCOM_SDX75 + tristate "Qualcomm SDX75 interconnect driver" + depends on INTERCONNECT_QCOM_RPMH_POSSIBLE + select INTERCONNECT_QCOM_RPMH + select INTERCONNECT_QCOM_BCM_VOTER + help + This is a driver for the Qualcomm Network-on-Chip on sdx75-based + platforms. + config INTERCONNECT_QCOM_SM6350 tristate "Qualcomm SM6350 interconnect driver" depends on INTERCONNECT_QCOM_RPMH_POSSIBLE diff --git a/drivers/interconnect/qcom/Makefile b/drivers/interconnect/qcom/Makefile index 80d9d2da95d1..c5320e293960 100644 --- a/drivers/interconnect/qcom/Makefile +++ b/drivers/interconnect/qcom/Makefile @@ -23,6 +23,7 @@ qnoc-sdm670-objs := sdm670.o qnoc-sdm845-objs := sdm845.o qnoc-sdx55-objs := sdx55.o qnoc-sdx65-objs := sdx65.o +qnoc-sdx75-objs := sdx75.o qnoc-sm6350-objs := sm6350.o qnoc-sm8150-objs := sm8150.o qnoc-sm8250-objs := sm8250.o @@ -51,6 +52,7 @@ obj-$(CONFIG_INTERCONNECT_QCOM_SDM670) += qnoc-sdm670.o obj-$(CONFIG_INTERCONNECT_QCOM_SDM845) += qnoc-sdm845.o obj-$(CONFIG_INTERCONNECT_QCOM_SDX55) += qnoc-sdx55.o obj-$(CONFIG_INTERCONNECT_QCOM_SDX65) += qnoc-sdx65.o +obj-$(CONFIG_INTERCONNECT_QCOM_SDX75) += qnoc-sdx75.o obj-$(CONFIG_INTERCONNECT_QCOM_SM6350) += qnoc-sm6350.o obj-$(CONFIG_INTERCONNECT_QCOM_SM8150) += qnoc-sm8150.o obj-$(CONFIG_INTERCONNECT_QCOM_SM8250) += qnoc-sm8250.o diff --git a/drivers/interconnect/qcom/icc-rpm-clocks.c b/drivers/interconnect/qcom/icc-rpm-clocks.c index 63c82a91bbc7..ac1677de7dfd 100644 --- a/drivers/interconnect/qcom/icc-rpm-clocks.c +++ b/drivers/interconnect/qcom/icc-rpm-clocks.c @@ -25,6 +25,12 @@ const struct rpm_clk_resource bimc_clk = { }; EXPORT_SYMBOL_GPL(bimc_clk); +const struct rpm_clk_resource mem_1_clk = { + .resource_type = QCOM_SMD_RPM_MEM_CLK, + .clock_id = 1, +}; +EXPORT_SYMBOL_GPL(mem_1_clk); + const struct rpm_clk_resource bus_0_clk = { .resource_type = QCOM_SMD_RPM_BUS_CLK, .clock_id = 0, diff --git a/drivers/interconnect/qcom/icc-rpm.c b/drivers/interconnect/qcom/icc-rpm.c index 2c16917ba1fd..628e651c555c 100644 --- a/drivers/interconnect/qcom/icc-rpm.c +++ b/drivers/interconnect/qcom/icc-rpm.c @@ -291,6 +291,32 @@ static int qcom_icc_bw_aggregate(struct icc_node *node, u32 tag, u32 avg_bw, return 0; } +static u64 qcom_icc_calc_rate(struct qcom_icc_provider *qp, struct qcom_icc_node *qn, int ctx) +{ + u64 agg_avg_rate, agg_peak_rate, agg_rate; + + if (qn->channels) + agg_avg_rate = div_u64(qn->sum_avg[ctx], qn->channels); + else + agg_avg_rate = qn->sum_avg[ctx]; + + if (qn->ab_coeff) { + agg_avg_rate = agg_avg_rate * qn->ab_coeff; + agg_avg_rate = div_u64(agg_avg_rate, 100); + } + + if (qn->ib_coeff) { + agg_peak_rate = qn->max_peak[ctx] * 100; + agg_peak_rate = div_u64(qn->max_peak[ctx], qn->ib_coeff); + } else { + agg_peak_rate = qn->max_peak[ctx]; + } + + agg_rate = max_t(u64, agg_avg_rate, agg_peak_rate); + + return div_u64(agg_rate, qn->buswidth); +} + /** * qcom_icc_bus_aggregate - calculate bus clock rates by traversing all nodes * @provider: generic interconnect provider @@ -298,10 +324,10 @@ static int qcom_icc_bw_aggregate(struct icc_node *node, u32 tag, u32 avg_bw, */ static void qcom_icc_bus_aggregate(struct icc_provider *provider, u64 *agg_clk_rate) { - u64 agg_avg_rate, agg_rate; + struct qcom_icc_provider *qp = to_qcom_provider(provider); struct qcom_icc_node *qn; struct icc_node *node; - int i; + int ctx; /* * Iterate nodes on the provider, aggregate bandwidth requests for @@ -309,16 +335,9 @@ static void qcom_icc_bus_aggregate(struct icc_provider *provider, u64 *agg_clk_r */ list_for_each_entry(node, &provider->nodes, node_list) { qn = node->data; - for (i = 0; i < QCOM_SMD_RPM_STATE_NUM; i++) { - if (qn->channels) - agg_avg_rate = div_u64(qn->sum_avg[i], qn->channels); - else - agg_avg_rate = qn->sum_avg[i]; - - agg_rate = max_t(u64, agg_avg_rate, qn->max_peak[i]); - do_div(agg_rate, qn->buswidth); - - agg_clk_rate[i] = max_t(u64, agg_clk_rate[i], agg_rate); + for (ctx = 0; ctx < QCOM_SMD_RPM_STATE_NUM; ctx++) { + agg_clk_rate[ctx] = max_t(u64, agg_clk_rate[ctx], + qcom_icc_calc_rate(qp, qn, ctx)); } } } @@ -395,6 +414,33 @@ static int qcom_icc_set(struct icc_node *src, struct icc_node *dst) qp->bus_clk_rate[QCOM_SMD_RPM_SLEEP_STATE] = sleep_rate; } + /* Handle the node-specific clock */ + if (!src_qn->bus_clk_desc) + return 0; + + active_rate = qcom_icc_calc_rate(qp, src_qn, QCOM_SMD_RPM_ACTIVE_STATE); + sleep_rate = qcom_icc_calc_rate(qp, src_qn, QCOM_SMD_RPM_SLEEP_STATE); + + if (active_rate != src_qn->bus_clk_rate[QCOM_SMD_RPM_ACTIVE_STATE]) { + ret = qcom_icc_rpm_set_bus_rate(src_qn->bus_clk_desc, QCOM_SMD_RPM_ACTIVE_STATE, + active_rate); + if (ret) + return ret; + + /* Cache the rate after we've successfully committed it to RPM */ + src_qn->bus_clk_rate[QCOM_SMD_RPM_ACTIVE_STATE] = active_rate; + } + + if (sleep_rate != src_qn->bus_clk_rate[QCOM_SMD_RPM_SLEEP_STATE]) { + ret = qcom_icc_rpm_set_bus_rate(src_qn->bus_clk_desc, QCOM_SMD_RPM_SLEEP_STATE, + sleep_rate); + if (ret) + return ret; + + /* Cache the rate after we've successfully committed it to RPM */ + src_qn->bus_clk_rate[QCOM_SMD_RPM_SLEEP_STATE] = sleep_rate; + } + return 0; } @@ -497,7 +543,7 @@ regmap_done: ret = devm_clk_bulk_get(dev, qp->num_intf_clks, qp->intf_clks); if (ret) - return ret; + goto err_disable_unprepare_clk; provider = &qp->provider; provider->dev = dev; @@ -512,13 +558,21 @@ regmap_done: /* If this fails, bus accesses will crash the platform! */ ret = clk_bulk_prepare_enable(qp->num_intf_clks, qp->intf_clks); if (ret) - return ret; + goto err_disable_unprepare_clk; for (i = 0; i < num_nodes; i++) { size_t j; + if (!qnodes[i]->ab_coeff) + qnodes[i]->ab_coeff = qp->ab_coeff; + + if (!qnodes[i]->ib_coeff) + qnodes[i]->ib_coeff = qp->ib_coeff; + node = icc_node_create(qnodes[i]->id); if (IS_ERR(node)) { + clk_bulk_disable_unprepare(qp->num_intf_clks, + qp->intf_clks); ret = PTR_ERR(node); goto err_remove_nodes; } @@ -534,8 +588,11 @@ regmap_done: if (qnodes[i]->qos.ap_owned && qnodes[i]->qos.qos_mode != NOC_QOS_MODE_INVALID) { ret = qcom_icc_qos_set(node); - if (ret) - return ret; + if (ret) { + clk_bulk_disable_unprepare(qp->num_intf_clks, + qp->intf_clks); + goto err_remove_nodes; + } } data->nodes[i] = node; @@ -563,6 +620,7 @@ err_deregister_provider: icc_provider_deregister(provider); err_remove_nodes: icc_nodes_remove(provider); +err_disable_unprepare_clk: clk_disable_unprepare(qp->bus_clk); return ret; diff --git a/drivers/interconnect/qcom/icc-rpm.h b/drivers/interconnect/qcom/icc-rpm.h index eed3451af3e6..a13768cfd231 100644 --- a/drivers/interconnect/qcom/icc-rpm.h +++ b/drivers/interconnect/qcom/icc-rpm.h @@ -44,6 +44,8 @@ struct rpm_clk_resource { * @type: the ICC provider type * @regmap: regmap for QoS registers read/write access * @qos_offset: offset to QoS registers + * @ab_coeff: a percentage-based coefficient for compensating the AB calculations + * @ib_coeff: an inverse-percentage-based coefficient for compensating the IB calculations * @bus_clk_rate: bus clock rate in Hz * @bus_clk_desc: a pointer to a rpm_clk_resource description of bus clocks * @bus_clk: a pointer to a HLOS-owned bus clock @@ -57,6 +59,8 @@ struct qcom_icc_provider { enum qcom_icc_type type; struct regmap *regmap; unsigned int qos_offset; + u16 ab_coeff; + u16 ib_coeff; u32 bus_clk_rate[QCOM_SMD_RPM_STATE_NUM]; const struct rpm_clk_resource *bus_clk_desc; struct clk *bus_clk; @@ -93,11 +97,15 @@ struct qcom_icc_qos { * @num_links: the total number of @links * @channels: number of channels at this node (e.g. DDR channels) * @buswidth: width of the interconnect between a node and the bus (bytes) + * @bus_clk_desc: a pointer to a rpm_clk_resource description of bus clocks * @sum_avg: current sum aggregate value of all avg bw requests * @max_peak: current max aggregate value of all peak bw requests * @mas_rpm_id: RPM id for devices that are bus masters * @slv_rpm_id: RPM id for devices that are bus slaves * @qos: NoC QoS setting parameters + * @ab_coeff: a percentage-based coefficient for compensating the AB calculations + * @ib_coeff: an inverse-percentage-based coefficient for compensating the IB calculations + * @bus_clk_rate: a pointer to an array containing bus clock rates in Hz */ struct qcom_icc_node { unsigned char *name; @@ -106,11 +114,15 @@ struct qcom_icc_node { u16 num_links; u16 channels; u16 buswidth; + const struct rpm_clk_resource *bus_clk_desc; u64 sum_avg[QCOM_SMD_RPM_STATE_NUM]; u64 max_peak[QCOM_SMD_RPM_STATE_NUM]; int mas_rpm_id; int slv_rpm_id; struct qcom_icc_qos qos; + u16 ab_coeff; + u16 ib_coeff; + u32 bus_clk_rate[QCOM_SMD_RPM_STATE_NUM]; }; struct qcom_icc_desc { @@ -123,6 +135,8 @@ struct qcom_icc_desc { enum qcom_icc_type type; const struct regmap_config *regmap_cfg; unsigned int qos_offset; + u16 ab_coeff; + u16 ib_coeff; }; /* Valid for all bus types */ @@ -138,6 +152,7 @@ extern const struct rpm_clk_resource bimc_clk; extern const struct rpm_clk_resource bus_0_clk; extern const struct rpm_clk_resource bus_1_clk; extern const struct rpm_clk_resource bus_2_clk; +extern const struct rpm_clk_resource mem_1_clk; extern const struct rpm_clk_resource mmaxi_0_clk; extern const struct rpm_clk_resource mmaxi_1_clk; extern const struct rpm_clk_resource qup_clk; diff --git a/drivers/interconnect/qcom/icc-rpmh.c b/drivers/interconnect/qcom/icc-rpmh.c index b9f27ce3b607..c1aa265c1f4e 100644 --- a/drivers/interconnect/qcom/icc-rpmh.c +++ b/drivers/interconnect/qcom/icc-rpmh.c @@ -253,14 +253,12 @@ err_remove_nodes: } EXPORT_SYMBOL_GPL(qcom_icc_rpmh_probe); -int qcom_icc_rpmh_remove(struct platform_device *pdev) +void qcom_icc_rpmh_remove(struct platform_device *pdev) { struct qcom_icc_provider *qp = platform_get_drvdata(pdev); icc_provider_deregister(&qp->provider); icc_nodes_remove(&qp->provider); - - return 0; } EXPORT_SYMBOL_GPL(qcom_icc_rpmh_remove); diff --git a/drivers/interconnect/qcom/icc-rpmh.h b/drivers/interconnect/qcom/icc-rpmh.h index 5f0af8b1fc43..2de29460e808 100644 --- a/drivers/interconnect/qcom/icc-rpmh.h +++ b/drivers/interconnect/qcom/icc-rpmh.h @@ -126,6 +126,6 @@ int qcom_icc_set(struct icc_node *src, struct icc_node *dst); int qcom_icc_bcm_init(struct qcom_icc_bcm *bcm, struct device *dev); void qcom_icc_pre_aggregate(struct icc_node *node); int qcom_icc_rpmh_probe(struct platform_device *pdev); -int qcom_icc_rpmh_remove(struct platform_device *pdev); +void qcom_icc_rpmh_remove(struct platform_device *pdev); #endif diff --git a/drivers/interconnect/qcom/msm8974.c b/drivers/interconnect/qcom/msm8974.c index 885ca9d6d4ed..21f6c852141e 100644 --- a/drivers/interconnect/qcom/msm8974.c +++ b/drivers/interconnect/qcom/msm8974.c @@ -28,6 +28,8 @@ */ #include <dt-bindings/interconnect/qcom,msm8974.h> + +#include <linux/args.h> #include <linux/clk.h> #include <linux/device.h> #include <linux/interconnect-provider.h> @@ -231,7 +233,7 @@ struct msm8974_icc_desc { .buswidth = _buswidth, \ .mas_rpm_id = _mas_rpm_id, \ .slv_rpm_id = _slv_rpm_id, \ - .num_links = ARRAY_SIZE(((int[]){ __VA_ARGS__ })), \ + .num_links = COUNT_ARGS(__VA_ARGS__), \ .links = { __VA_ARGS__ }, \ } diff --git a/drivers/interconnect/qcom/msm8996.c b/drivers/interconnect/qcom/msm8996.c index 88683dfa468f..b73566c9b21f 100644 --- a/drivers/interconnect/qcom/msm8996.c +++ b/drivers/interconnect/qcom/msm8996.c @@ -448,6 +448,7 @@ static struct qcom_icc_node mas_mdp_p0 = { .name = "mas_mdp_p0", .id = MSM8996_MASTER_MDP_PORT0, .buswidth = 32, + .ib_coeff = 25, .mas_rpm_id = 8, .slv_rpm_id = -1, .qos.ap_owned = true, @@ -463,6 +464,7 @@ static struct qcom_icc_node mas_mdp_p1 = { .name = "mas_mdp_p1", .id = MSM8996_MASTER_MDP_PORT1, .buswidth = 32, + .ib_coeff = 25, .mas_rpm_id = 61, .slv_rpm_id = -1, .qos.ap_owned = true, @@ -1889,7 +1891,8 @@ static const struct qcom_icc_desc msm8996_bimc = { .nodes = bimc_nodes, .num_nodes = ARRAY_SIZE(bimc_nodes), .bus_clk_desc = &bimc_clk, - .regmap_cfg = &msm8996_bimc_regmap_config + .regmap_cfg = &msm8996_bimc_regmap_config, + .ab_coeff = 154, }; static struct qcom_icc_node * const cnoc_nodes[] = { @@ -2004,7 +2007,8 @@ static const struct qcom_icc_desc msm8996_mnoc = { .bus_clk_desc = &mmaxi_0_clk, .intf_clocks = mm_intf_clocks, .num_intf_clocks = ARRAY_SIZE(mm_intf_clocks), - .regmap_cfg = &msm8996_mnoc_regmap_config + .regmap_cfg = &msm8996_mnoc_regmap_config, + .ab_coeff = 154, }; static struct qcom_icc_node * const pnoc_nodes[] = { diff --git a/drivers/interconnect/qcom/osm-l3.c b/drivers/interconnect/qcom/osm-l3.c index dc321bb86d0b..e97478bbc282 100644 --- a/drivers/interconnect/qcom/osm-l3.c +++ b/drivers/interconnect/qcom/osm-l3.c @@ -3,6 +3,7 @@ * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. */ +#include <linux/args.h> #include <linux/bitfield.h> #include <linux/clk.h> #include <linux/interconnect-provider.h> @@ -78,7 +79,7 @@ enum { .name = #_name, \ .id = _id, \ .buswidth = _buswidth, \ - .num_links = ARRAY_SIZE(((int[]){ __VA_ARGS__ })), \ + .num_links = COUNT_ARGS(__VA_ARGS__), \ .links = { __VA_ARGS__ }, \ } diff --git a/drivers/interconnect/qcom/qcm2290.c b/drivers/interconnect/qcom/qcm2290.c index 5bc4b7516608..b88cf9a022e0 100644 --- a/drivers/interconnect/qcom/qcm2290.c +++ b/drivers/interconnect/qcom/qcm2290.c @@ -112,6 +112,9 @@ static struct qcom_icc_node mas_appss_proc = { .qos.qos_mode = NOC_QOS_MODE_FIXED, .qos.prio_level = 0, .qos.areq_prio = 0, + .bus_clk_desc = &mem_1_clk, + .ab_coeff = 159, + .ib_coeff = 96, .mas_rpm_id = 0, .slv_rpm_id = -1, .num_links = ARRAY_SIZE(mas_appss_proc_links), @@ -675,7 +678,8 @@ static struct qcom_icc_node mas_gfx3d = { static struct qcom_icc_node slv_ebi1 = { .name = "slv_ebi1", .id = QCM2290_SLAVE_EBI1, - .buswidth = 8, + .buswidth = 4, + .channels = 2, .mas_rpm_id = -1, .slv_rpm_id = 0, }; @@ -1199,6 +1203,7 @@ static const struct qcom_icc_desc qcm2290_bimc = { .keep_alive = true, /* M_REG_BASE() in vendor msm_bus_bimc_adhoc driver */ .qos_offset = 0x8000, + .ab_coeff = 153, }; static struct qcom_icc_node * const qcm2290_cnoc_nodes[] = { @@ -1329,6 +1334,7 @@ static const struct qcom_icc_desc qcm2290_mmnrt_virt = { .regmap_cfg = &qcm2290_snoc_regmap_config, .keep_alive = true, .qos_offset = 0x15000, + .ab_coeff = 142, }; static struct qcom_icc_node * const qcm2290_mmrt_virt_nodes[] = { @@ -1345,6 +1351,7 @@ static const struct qcom_icc_desc qcm2290_mmrt_virt = { .regmap_cfg = &qcm2290_snoc_regmap_config, .keep_alive = true, .qos_offset = 0x15000, + .ab_coeff = 139, }; static const struct of_device_id qcm2290_noc_of_match[] = { diff --git a/drivers/interconnect/qcom/qdu1000.c b/drivers/interconnect/qcom/qdu1000.c index bf800dd7d4ba..9cb477d2bdfe 100644 --- a/drivers/interconnect/qcom/qdu1000.c +++ b/drivers/interconnect/qcom/qdu1000.c @@ -769,6 +769,7 @@ static struct qcom_icc_node xs_sys_tcu_cfg = { static struct qcom_icc_bcm bcm_acv = { .name = "ACV", + .enable_mask = BIT(3), .num_nodes = 1, .nodes = { &ebi }, }; @@ -1045,7 +1046,7 @@ MODULE_DEVICE_TABLE(of, qnoc_of_match); static struct platform_driver qnoc_driver = { .probe = qnoc_probe, - .remove = qcom_icc_rpmh_remove, + .remove_new = qcom_icc_rpmh_remove, .driver = { .name = "qnoc-qdu1000", .of_match_table = qnoc_of_match, diff --git a/drivers/interconnect/qcom/sa8775p.c b/drivers/interconnect/qcom/sa8775p.c index ef1b5e326089..dd6281db08ad 100644 --- a/drivers/interconnect/qcom/sa8775p.c +++ b/drivers/interconnect/qcom/sa8775p.c @@ -2519,7 +2519,7 @@ MODULE_DEVICE_TABLE(of, qnoc_of_match); static struct platform_driver qnoc_driver = { .probe = qcom_icc_rpmh_probe, - .remove = qcom_icc_rpmh_remove, + .remove_new = qcom_icc_rpmh_remove, .driver = { .name = "qnoc-sa8775p", .of_match_table = qnoc_of_match, diff --git a/drivers/interconnect/qcom/sc7180.c b/drivers/interconnect/qcom/sc7180.c index d94ab9b39f3d..34a1d163d6e1 100644 --- a/drivers/interconnect/qcom/sc7180.c +++ b/drivers/interconnect/qcom/sc7180.c @@ -1238,6 +1238,7 @@ static struct qcom_icc_node xs_sys_tcu_cfg = { static struct qcom_icc_bcm bcm_acv = { .name = "ACV", + .enable_mask = BIT(3), .keepalive = false, .num_nodes = 1, .nodes = { &ebi }, @@ -1806,7 +1807,7 @@ MODULE_DEVICE_TABLE(of, qnoc_of_match); static struct platform_driver qnoc_driver = { .probe = qcom_icc_rpmh_probe, - .remove = qcom_icc_rpmh_remove, + .remove_new = qcom_icc_rpmh_remove, .driver = { .name = "qnoc-sc7180", .of_match_table = qnoc_of_match, diff --git a/drivers/interconnect/qcom/sc7280.c b/drivers/interconnect/qcom/sc7280.c index 6592839b4d94..7d33694368e8 100644 --- a/drivers/interconnect/qcom/sc7280.c +++ b/drivers/interconnect/qcom/sc7280.c @@ -1285,6 +1285,7 @@ static struct qcom_icc_node srvc_snoc = { static struct qcom_icc_bcm bcm_acv = { .name = "ACV", + .enable_mask = BIT(3), .num_nodes = 1, .nodes = { &ebi }, }; @@ -1834,7 +1835,7 @@ MODULE_DEVICE_TABLE(of, qnoc_of_match); static struct platform_driver qnoc_driver = { .probe = qcom_icc_rpmh_probe, - .remove = qcom_icc_rpmh_remove, + .remove_new = qcom_icc_rpmh_remove, .driver = { .name = "qnoc-sc7280", .of_match_table = qnoc_of_match, diff --git a/drivers/interconnect/qcom/sc8180x.c b/drivers/interconnect/qcom/sc8180x.c index 0fb4898dabcf..20331e119beb 100644 --- a/drivers/interconnect/qcom/sc8180x.c +++ b/drivers/interconnect/qcom/sc8180x.c @@ -1345,6 +1345,7 @@ static struct qcom_icc_node slv_qup_core_2 = { static struct qcom_icc_bcm bcm_acv = { .name = "ACV", + .enable_mask = BIT(3), .num_nodes = 1, .nodes = { &slv_ebi } }; @@ -1887,7 +1888,7 @@ MODULE_DEVICE_TABLE(of, qnoc_of_match); static struct platform_driver qnoc_driver = { .probe = qcom_icc_rpmh_probe, - .remove = qcom_icc_rpmh_remove, + .remove_new = qcom_icc_rpmh_remove, .driver = { .name = "qnoc-sc8180x", .of_match_table = qnoc_of_match, diff --git a/drivers/interconnect/qcom/sc8280xp.c b/drivers/interconnect/qcom/sc8280xp.c index b82c5493cbb5..7acd152bf0dd 100644 --- a/drivers/interconnect/qcom/sc8280xp.c +++ b/drivers/interconnect/qcom/sc8280xp.c @@ -1712,6 +1712,7 @@ static struct qcom_icc_node srvc_snoc = { static struct qcom_icc_bcm bcm_acv = { .name = "ACV", + .enable_mask = BIT(3), .num_nodes = 1, .nodes = { &ebi }, }; @@ -2390,7 +2391,7 @@ MODULE_DEVICE_TABLE(of, qnoc_of_match); static struct platform_driver qnoc_driver = { .probe = qcom_icc_rpmh_probe, - .remove = qcom_icc_rpmh_remove, + .remove_new = qcom_icc_rpmh_remove, .driver = { .name = "qnoc-sc8280xp", .of_match_table = qnoc_of_match, diff --git a/drivers/interconnect/qcom/sdm660.c b/drivers/interconnect/qcom/sdm660.c index 36962f7bd7bb..7392bebba334 100644 --- a/drivers/interconnect/qcom/sdm660.c +++ b/drivers/interconnect/qcom/sdm660.c @@ -602,6 +602,7 @@ static struct qcom_icc_node mas_mdp_p0 = { .name = "mas_mdp_p0", .id = SDM660_MASTER_MDP_P0, .buswidth = 16, + .ib_coeff = 50, .mas_rpm_id = 8, .slv_rpm_id = -1, .qos.ap_owned = true, @@ -621,6 +622,7 @@ static struct qcom_icc_node mas_mdp_p1 = { .name = "mas_mdp_p1", .id = SDM660_MASTER_MDP_P1, .buswidth = 16, + .ib_coeff = 50, .mas_rpm_id = 61, .slv_rpm_id = -1, .qos.ap_owned = true, @@ -1540,6 +1542,7 @@ static const struct qcom_icc_desc sdm660_bimc = { .num_nodes = ARRAY_SIZE(sdm660_bimc_nodes), .bus_clk_desc = &bimc_clk, .regmap_cfg = &sdm660_bimc_regmap_config, + .ab_coeff = 153, }; static struct qcom_icc_node * const sdm660_cnoc_nodes[] = { @@ -1659,6 +1662,7 @@ static const struct qcom_icc_desc sdm660_mnoc = { .intf_clocks = mm_intf_clocks, .num_intf_clocks = ARRAY_SIZE(mm_intf_clocks), .regmap_cfg = &sdm660_mnoc_regmap_config, + .ab_coeff = 153, }; static struct qcom_icc_node * const sdm660_snoc_nodes[] = { diff --git a/drivers/interconnect/qcom/sdm670.c b/drivers/interconnect/qcom/sdm670.c index 540a2108b77c..e5ee7fbaa641 100644 --- a/drivers/interconnect/qcom/sdm670.c +++ b/drivers/interconnect/qcom/sdm670.c @@ -1047,6 +1047,7 @@ static struct qcom_icc_node xs_sys_tcu_cfg = { static struct qcom_icc_bcm bcm_acv = { .name = "ACV", + .enable_mask = BIT(3), .keepalive = false, .num_nodes = 1, .nodes = { &ebi }, @@ -1532,7 +1533,7 @@ MODULE_DEVICE_TABLE(of, qnoc_of_match); static struct platform_driver qnoc_driver = { .probe = qcom_icc_rpmh_probe, - .remove = qcom_icc_rpmh_remove, + .remove_new = qcom_icc_rpmh_remove, .driver = { .name = "qnoc-sdm670", .of_match_table = qnoc_of_match, diff --git a/drivers/interconnect/qcom/sdm845.c b/drivers/interconnect/qcom/sdm845.c index b9243c0aa626..584800ac871a 100644 --- a/drivers/interconnect/qcom/sdm845.c +++ b/drivers/interconnect/qcom/sdm845.c @@ -1265,6 +1265,7 @@ static struct qcom_icc_node xs_sys_tcu_cfg = { static struct qcom_icc_bcm bcm_acv = { .name = "ACV", + .enable_mask = BIT(3), .keepalive = false, .num_nodes = 1, .nodes = { &ebi }, @@ -1801,7 +1802,7 @@ MODULE_DEVICE_TABLE(of, qnoc_of_match); static struct platform_driver qnoc_driver = { .probe = qcom_icc_rpmh_probe, - .remove = qcom_icc_rpmh_remove, + .remove_new = qcom_icc_rpmh_remove, .driver = { .name = "qnoc-sdm845", .of_match_table = qnoc_of_match, diff --git a/drivers/interconnect/qcom/sdx55.c b/drivers/interconnect/qcom/sdx55.c index 4117db046fa0..e97f28b8d2b2 100644 --- a/drivers/interconnect/qcom/sdx55.c +++ b/drivers/interconnect/qcom/sdx55.c @@ -913,7 +913,7 @@ MODULE_DEVICE_TABLE(of, qnoc_of_match); static struct platform_driver qnoc_driver = { .probe = qcom_icc_rpmh_probe, - .remove = qcom_icc_rpmh_remove, + .remove_new = qcom_icc_rpmh_remove, .driver = { .name = "qnoc-sdx55", .of_match_table = qnoc_of_match, diff --git a/drivers/interconnect/qcom/sdx65.c b/drivers/interconnect/qcom/sdx65.c index d3a6c6c148e5..2f3f5479d8a5 100644 --- a/drivers/interconnect/qcom/sdx65.c +++ b/drivers/interconnect/qcom/sdx65.c @@ -897,7 +897,7 @@ MODULE_DEVICE_TABLE(of, qnoc_of_match); static struct platform_driver qnoc_driver = { .probe = qcom_icc_rpmh_probe, - .remove = qcom_icc_rpmh_remove, + .remove_new = qcom_icc_rpmh_remove, .driver = { .name = "qnoc-sdx65", .of_match_table = qnoc_of_match, diff --git a/drivers/interconnect/qcom/sdx75.c b/drivers/interconnect/qcom/sdx75.c new file mode 100644 index 000000000000..7f422c27488d --- /dev/null +++ b/drivers/interconnect/qcom/sdx75.c @@ -0,0 +1,1107 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. + * + */ + +#include <linux/device.h> +#include <linux/interconnect.h> +#include <linux/interconnect-provider.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <dt-bindings/interconnect/qcom,sdx75.h> + +#include "bcm-voter.h" +#include "icc-common.h" +#include "icc-rpmh.h" +#include "sdx75.h" + +static struct qcom_icc_node qpic_core_master = { + .name = "qpic_core_master", + .id = SDX75_MASTER_QPIC_CORE, + .channels = 1, + .buswidth = 4, + .num_links = 1, + .links = { SDX75_SLAVE_QPIC_CORE }, +}; + +static struct qcom_icc_node qup0_core_master = { + .name = "qup0_core_master", + .id = SDX75_MASTER_QUP_CORE_0, + .channels = 1, + .buswidth = 4, + .num_links = 1, + .links = { SDX75_SLAVE_QUP_CORE_0 }, +}; + +static struct qcom_icc_node qnm_cnoc = { + .name = "qnm_cnoc", + .id = SDX75_MASTER_CNOC_DC_NOC, + .channels = 1, + .buswidth = 4, + .num_links = 4, + .links = { SDX75_SLAVE_LAGG_CFG, SDX75_SLAVE_MCCC_MASTER, + SDX75_SLAVE_GEM_NOC_CFG, SDX75_SLAVE_SNOOP_BWMON }, +}; + +static struct qcom_icc_node alm_sys_tcu = { + .name = "alm_sys_tcu", + .id = SDX75_MASTER_SYS_TCU, + .channels = 1, + .buswidth = 8, + .num_links = 2, + .links = { SDX75_SLAVE_GEM_NOC_CNOC, SDX75_SLAVE_LLCC }, +}; + +static struct qcom_icc_node chm_apps = { + .name = "chm_apps", + .id = SDX75_MASTER_APPSS_PROC, + .channels = 1, + .buswidth = 16, + .num_links = 3, + .links = { SDX75_SLAVE_GEM_NOC_CNOC, SDX75_SLAVE_LLCC, + SDX75_SLAVE_MEM_NOC_PCIE_SNOC }, +}; + +static struct qcom_icc_node qnm_gemnoc_cfg = { + .name = "qnm_gemnoc_cfg", + .id = SDX75_MASTER_GEM_NOC_CFG, + .channels = 1, + .buswidth = 4, + .num_links = 1, + .links = { SDX75_SLAVE_SERVICE_GEM_NOC }, +}; + +static struct qcom_icc_node qnm_mdsp = { + .name = "qnm_mdsp", + .id = SDX75_MASTER_MSS_PROC, + .channels = 1, + .buswidth = 16, + .num_links = 3, + .links = { SDX75_SLAVE_GEM_NOC_CNOC, SDX75_SLAVE_LLCC, + SDX75_SLAVE_MEM_NOC_PCIE_SNOC }, +}; + +static struct qcom_icc_node qnm_pcie = { + .name = "qnm_pcie", + .id = SDX75_MASTER_ANOC_PCIE_GEM_NOC, + .channels = 1, + .buswidth = 16, + .num_links = 2, + .links = { SDX75_SLAVE_GEM_NOC_CNOC, SDX75_SLAVE_LLCC }, +}; + +static struct qcom_icc_node qnm_snoc_sf = { + .name = "qnm_snoc_sf", + .id = SDX75_MASTER_SNOC_SF_MEM_NOC, + .channels = 1, + .buswidth = 16, + .num_links = 3, + .links = { SDX75_SLAVE_GEM_NOC_CNOC, SDX75_SLAVE_LLCC, + SDX75_SLAVE_MEM_NOC_PCIE_SNOC }, +}; + +static struct qcom_icc_node xm_gic = { + .name = "xm_gic", + .id = SDX75_MASTER_GIC, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SDX75_SLAVE_LLCC }, +}; + +static struct qcom_icc_node xm_ipa2pcie = { + .name = "xm_ipa2pcie", + .id = SDX75_MASTER_IPA_PCIE, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SDX75_SLAVE_MEM_NOC_PCIE_SNOC }, +}; + +static struct qcom_icc_node llcc_mc = { + .name = "llcc_mc", + .id = SDX75_MASTER_LLCC, + .channels = 1, + .buswidth = 4, + .num_links = 1, + .links = { SDX75_SLAVE_EBI1 }, +}; + +static struct qcom_icc_node xm_pcie3_0 = { + .name = "xm_pcie3_0", + .id = SDX75_MASTER_PCIE_0, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SDX75_SLAVE_ANOC_PCIE_GEM_NOC }, +}; + +static struct qcom_icc_node xm_pcie3_1 = { + .name = "xm_pcie3_1", + .id = SDX75_MASTER_PCIE_1, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SDX75_SLAVE_ANOC_PCIE_GEM_NOC }, +}; + +static struct qcom_icc_node xm_pcie3_2 = { + .name = "xm_pcie3_2", + .id = SDX75_MASTER_PCIE_2, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SDX75_SLAVE_ANOC_PCIE_GEM_NOC }, +}; + +static struct qcom_icc_node qhm_audio = { + .name = "qhm_audio", + .id = SDX75_MASTER_AUDIO, + .channels = 1, + .buswidth = 4, + .num_links = 1, + .links = { SDX75_SLAVE_SNOC_GEM_NOC_SF }, +}; + +static struct qcom_icc_node qhm_gic = { + .name = "qhm_gic", + .id = SDX75_MASTER_GIC_AHB, + .channels = 1, + .buswidth = 4, + .num_links = 1, + .links = { SDX75_SLAVE_SNOC_GEM_NOC_SF }, +}; + +static struct qcom_icc_node qhm_pcie_rscc = { + .name = "qhm_pcie_rscc", + .id = SDX75_MASTER_PCIE_RSCC, + .channels = 1, + .buswidth = 4, + .num_links = 31, + .links = { SDX75_SLAVE_ETH0_CFG, SDX75_SLAVE_ETH1_CFG, + SDX75_SLAVE_AUDIO, SDX75_SLAVE_CLK_CTL, + SDX75_SLAVE_CRYPTO_0_CFG, SDX75_SLAVE_IMEM_CFG, + SDX75_SLAVE_IPA_CFG, SDX75_SLAVE_IPC_ROUTER_CFG, + SDX75_SLAVE_CNOC_MSS, SDX75_SLAVE_ICBDI_MVMSS_CFG, + SDX75_SLAVE_PCIE_0_CFG, SDX75_SLAVE_PCIE_1_CFG, + SDX75_SLAVE_PCIE_2_CFG, SDX75_SLAVE_PDM, + SDX75_SLAVE_PRNG, SDX75_SLAVE_QDSS_CFG, + SDX75_SLAVE_QPIC, SDX75_SLAVE_QUP_0, + SDX75_SLAVE_SDCC_1, SDX75_SLAVE_SDCC_4, + SDX75_SLAVE_SPMI_VGI_COEX, SDX75_SLAVE_TCSR, + SDX75_SLAVE_TLMM, SDX75_SLAVE_USB3, + SDX75_SLAVE_USB3_PHY_CFG, SDX75_SLAVE_DDRSS_CFG, + SDX75_SLAVE_SNOC_CFG, SDX75_SLAVE_PCIE_ANOC_CFG, + SDX75_SLAVE_IMEM, SDX75_SLAVE_QDSS_STM, + SDX75_SLAVE_TCU }, +}; + +static struct qcom_icc_node qhm_qdss_bam = { + .name = "qhm_qdss_bam", + .id = SDX75_MASTER_QDSS_BAM, + .channels = 1, + .buswidth = 4, + .num_links = 1, + .links = { SDX75_SLAVE_A1NOC_CFG }, +}; + +static struct qcom_icc_node qhm_qpic = { + .name = "qhm_qpic", + .id = SDX75_MASTER_QPIC, + .channels = 1, + .buswidth = 4, + .num_links = 1, + .links = { SDX75_SLAVE_A1NOC_CFG }, +}; + +static struct qcom_icc_node qhm_qup0 = { + .name = "qhm_qup0", + .id = SDX75_MASTER_QUP_0, + .channels = 1, + .buswidth = 4, + .num_links = 1, + .links = { SDX75_SLAVE_A1NOC_CFG }, +}; + +static struct qcom_icc_node qnm_aggre_noc = { + .name = "qnm_aggre_noc", + .id = SDX75_MASTER_ANOC_SNOC, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SDX75_SLAVE_SNOC_GEM_NOC_SF }, +}; + +static struct qcom_icc_node qnm_gemnoc_cnoc = { + .name = "qnm_gemnoc_cnoc", + .id = SDX75_MASTER_GEM_NOC_CNOC, + .channels = 1, + .buswidth = 8, + .num_links = 32, + .links = { SDX75_SLAVE_ETH0_CFG, SDX75_SLAVE_ETH1_CFG, + SDX75_SLAVE_AUDIO, SDX75_SLAVE_CLK_CTL, + SDX75_SLAVE_CRYPTO_0_CFG, SDX75_SLAVE_IMEM_CFG, + SDX75_SLAVE_IPA_CFG, SDX75_SLAVE_IPC_ROUTER_CFG, + SDX75_SLAVE_CNOC_MSS, SDX75_SLAVE_ICBDI_MVMSS_CFG, + SDX75_SLAVE_PCIE_0_CFG, SDX75_SLAVE_PCIE_1_CFG, + SDX75_SLAVE_PCIE_2_CFG, SDX75_SLAVE_PCIE_RSC_CFG, + SDX75_SLAVE_PDM, SDX75_SLAVE_PRNG, + SDX75_SLAVE_QDSS_CFG, SDX75_SLAVE_QPIC, + SDX75_SLAVE_QUP_0, SDX75_SLAVE_SDCC_1, + SDX75_SLAVE_SDCC_4, SDX75_SLAVE_SPMI_VGI_COEX, + SDX75_SLAVE_TCSR, SDX75_SLAVE_TLMM, + SDX75_SLAVE_USB3, SDX75_SLAVE_USB3_PHY_CFG, + SDX75_SLAVE_DDRSS_CFG, SDX75_SLAVE_SNOC_CFG, + SDX75_SLAVE_PCIE_ANOC_CFG, SDX75_SLAVE_IMEM, + SDX75_SLAVE_QDSS_STM, SDX75_SLAVE_TCU }, +}; + +static struct qcom_icc_node qnm_gemnoc_pcie = { + .name = "qnm_gemnoc_pcie", + .id = SDX75_MASTER_GEM_NOC_PCIE_SNOC, + .channels = 1, + .buswidth = 16, + .num_links = 3, + .links = { SDX75_SLAVE_PCIE_0, SDX75_SLAVE_PCIE_1, + SDX75_SLAVE_PCIE_2 }, +}; + +static struct qcom_icc_node qnm_system_noc_cfg = { + .name = "qnm_system_noc_cfg", + .id = SDX75_MASTER_SNOC_CFG, + .channels = 1, + .buswidth = 4, + .num_links = 1, + .links = { SDX75_SLAVE_SERVICE_SNOC }, +}; + +static struct qcom_icc_node qnm_system_noc_pcie_cfg = { + .name = "qnm_system_noc_pcie_cfg", + .id = SDX75_MASTER_PCIE_ANOC_CFG, + .channels = 1, + .buswidth = 4, + .num_links = 1, + .links = { SDX75_SLAVE_SERVICE_PCIE_ANOC }, +}; + +static struct qcom_icc_node qxm_crypto = { + .name = "qxm_crypto", + .id = SDX75_MASTER_CRYPTO, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SDX75_SLAVE_A1NOC_CFG }, +}; + +static struct qcom_icc_node qxm_ipa = { + .name = "qxm_ipa", + .id = SDX75_MASTER_IPA, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SDX75_SLAVE_SNOC_GEM_NOC_SF }, +}; + +static struct qcom_icc_node qxm_mvmss = { + .name = "qxm_mvmss", + .id = SDX75_MASTER_MVMSS, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SDX75_SLAVE_A1NOC_CFG }, +}; + +static struct qcom_icc_node xm_emac_0 = { + .name = "xm_emac_0", + .id = SDX75_MASTER_EMAC_0, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SDX75_SLAVE_A1NOC_CFG }, +}; + +static struct qcom_icc_node xm_emac_1 = { + .name = "xm_emac_1", + .id = SDX75_MASTER_EMAC_1, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SDX75_SLAVE_A1NOC_CFG }, +}; + +static struct qcom_icc_node xm_qdss_etr0 = { + .name = "xm_qdss_etr0", + .id = SDX75_MASTER_QDSS_ETR, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SDX75_SLAVE_A1NOC_CFG }, +}; + +static struct qcom_icc_node xm_qdss_etr1 = { + .name = "xm_qdss_etr1", + .id = SDX75_MASTER_QDSS_ETR_1, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SDX75_SLAVE_A1NOC_CFG }, +}; + +static struct qcom_icc_node xm_sdc1 = { + .name = "xm_sdc1", + .id = SDX75_MASTER_SDCC_1, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SDX75_SLAVE_A1NOC_CFG }, +}; + +static struct qcom_icc_node xm_sdc4 = { + .name = "xm_sdc4", + .id = SDX75_MASTER_SDCC_4, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SDX75_SLAVE_A1NOC_CFG }, +}; + +static struct qcom_icc_node xm_usb3 = { + .name = "xm_usb3", + .id = SDX75_MASTER_USB3_0, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SDX75_SLAVE_A1NOC_CFG }, +}; + +static struct qcom_icc_node qpic_core_slave = { + .name = "qpic_core_slave", + .id = SDX75_SLAVE_QPIC_CORE, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node qup0_core_slave = { + .name = "qup0_core_slave", + .id = SDX75_SLAVE_QUP_CORE_0, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node qhs_lagg = { + .name = "qhs_lagg", + .id = SDX75_SLAVE_LAGG_CFG, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node qhs_mccc_master = { + .name = "qhs_mccc_master", + .id = SDX75_SLAVE_MCCC_MASTER, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node qns_gemnoc = { + .name = "qns_gemnoc", + .id = SDX75_SLAVE_GEM_NOC_CFG, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node qss_snoop_bwmon = { + .name = "qss_snoop_bwmon", + .id = SDX75_SLAVE_SNOOP_BWMON, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node qns_gemnoc_cnoc = { + .name = "qns_gemnoc_cnoc", + .id = SDX75_SLAVE_GEM_NOC_CNOC, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SDX75_MASTER_GEM_NOC_CNOC }, +}; + +static struct qcom_icc_node qns_llcc = { + .name = "qns_llcc", + .id = SDX75_SLAVE_LLCC, + .channels = 1, + .buswidth = 16, + .num_links = 1, + .links = { SDX75_MASTER_LLCC }, +}; + +static struct qcom_icc_node qns_pcie = { + .name = "qns_pcie", + .id = SDX75_SLAVE_MEM_NOC_PCIE_SNOC, + .channels = 1, + .buswidth = 16, + .num_links = 1, + .links = { SDX75_MASTER_GEM_NOC_PCIE_SNOC }, +}; + +static struct qcom_icc_node srvc_gemnoc = { + .name = "srvc_gemnoc", + .id = SDX75_SLAVE_SERVICE_GEM_NOC, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node ebi = { + .name = "ebi", + .id = SDX75_SLAVE_EBI1, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node qns_pcie_gemnoc = { + .name = "qns_pcie_gemnoc", + .id = SDX75_SLAVE_ANOC_PCIE_GEM_NOC, + .channels = 1, + .buswidth = 16, + .num_links = 1, + .links = { SDX75_MASTER_ANOC_PCIE_GEM_NOC }, +}; + +static struct qcom_icc_node ps_eth0_cfg = { + .name = "ps_eth0_cfg", + .id = SDX75_SLAVE_ETH0_CFG, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node ps_eth1_cfg = { + .name = "ps_eth1_cfg", + .id = SDX75_SLAVE_ETH1_CFG, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node qhs_audio = { + .name = "qhs_audio", + .id = SDX75_SLAVE_AUDIO, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node qhs_clk_ctl = { + .name = "qhs_clk_ctl", + .id = SDX75_SLAVE_CLK_CTL, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node qhs_crypto_cfg = { + .name = "qhs_crypto_cfg", + .id = SDX75_SLAVE_CRYPTO_0_CFG, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node qhs_imem_cfg = { + .name = "qhs_imem_cfg", + .id = SDX75_SLAVE_IMEM_CFG, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node qhs_ipa = { + .name = "qhs_ipa", + .id = SDX75_SLAVE_IPA_CFG, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node qhs_ipc_router = { + .name = "qhs_ipc_router", + .id = SDX75_SLAVE_IPC_ROUTER_CFG, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node qhs_mss_cfg = { + .name = "qhs_mss_cfg", + .id = SDX75_SLAVE_CNOC_MSS, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node qhs_mvmss_cfg = { + .name = "qhs_mvmss_cfg", + .id = SDX75_SLAVE_ICBDI_MVMSS_CFG, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node qhs_pcie0_cfg = { + .name = "qhs_pcie0_cfg", + .id = SDX75_SLAVE_PCIE_0_CFG, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node qhs_pcie1_cfg = { + .name = "qhs_pcie1_cfg", + .id = SDX75_SLAVE_PCIE_1_CFG, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node qhs_pcie2_cfg = { + .name = "qhs_pcie2_cfg", + .id = SDX75_SLAVE_PCIE_2_CFG, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node qhs_pcie_rscc = { + .name = "qhs_pcie_rscc", + .id = SDX75_SLAVE_PCIE_RSC_CFG, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node qhs_pdm = { + .name = "qhs_pdm", + .id = SDX75_SLAVE_PDM, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node qhs_prng = { + .name = "qhs_prng", + .id = SDX75_SLAVE_PRNG, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node qhs_qdss_cfg = { + .name = "qhs_qdss_cfg", + .id = SDX75_SLAVE_QDSS_CFG, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node qhs_qpic = { + .name = "qhs_qpic", + .id = SDX75_SLAVE_QPIC, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node qhs_qup0 = { + .name = "qhs_qup0", + .id = SDX75_SLAVE_QUP_0, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node qhs_sdc1 = { + .name = "qhs_sdc1", + .id = SDX75_SLAVE_SDCC_1, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node qhs_sdc4 = { + .name = "qhs_sdc4", + .id = SDX75_SLAVE_SDCC_4, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node qhs_spmi_vgi_coex = { + .name = "qhs_spmi_vgi_coex", + .id = SDX75_SLAVE_SPMI_VGI_COEX, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node qhs_tcsr = { + .name = "qhs_tcsr", + .id = SDX75_SLAVE_TCSR, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node qhs_tlmm = { + .name = "qhs_tlmm", + .id = SDX75_SLAVE_TLMM, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node qhs_usb3 = { + .name = "qhs_usb3", + .id = SDX75_SLAVE_USB3, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node qhs_usb3_phy = { + .name = "qhs_usb3_phy", + .id = SDX75_SLAVE_USB3_PHY_CFG, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node qns_a1noc = { + .name = "qns_a1noc", + .id = SDX75_SLAVE_A1NOC_CFG, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SDX75_MASTER_ANOC_SNOC }, +}; + +static struct qcom_icc_node qns_ddrss_cfg = { + .name = "qns_ddrss_cfg", + .id = SDX75_SLAVE_DDRSS_CFG, + .channels = 1, + .buswidth = 4, + .num_links = 1, + .links = { SDX75_MASTER_CNOC_DC_NOC }, +}; + +static struct qcom_icc_node qns_gemnoc_sf = { + .name = "qns_gemnoc_sf", + .id = SDX75_SLAVE_SNOC_GEM_NOC_SF, + .channels = 1, + .buswidth = 16, + .num_links = 1, + .links = { SDX75_MASTER_SNOC_SF_MEM_NOC }, +}; + +static struct qcom_icc_node qns_system_noc_cfg = { + .name = "qns_system_noc_cfg", + .id = SDX75_SLAVE_SNOC_CFG, + .channels = 1, + .buswidth = 4, + .num_links = 1, + .links = { SDX75_MASTER_SNOC_CFG }, +}; + +static struct qcom_icc_node qns_system_noc_pcie_cfg = { + .name = "qns_system_noc_pcie_cfg", + .id = SDX75_SLAVE_PCIE_ANOC_CFG, + .channels = 1, + .buswidth = 4, + .num_links = 1, + .links = { SDX75_MASTER_PCIE_ANOC_CFG }, +}; + +static struct qcom_icc_node qxs_imem = { + .name = "qxs_imem", + .id = SDX75_SLAVE_IMEM, + .channels = 1, + .buswidth = 8, + .num_links = 0, +}; + +static struct qcom_icc_node srvc_pcie_system_noc = { + .name = "srvc_pcie_system_noc", + .id = SDX75_SLAVE_SERVICE_PCIE_ANOC, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node srvc_system_noc = { + .name = "srvc_system_noc", + .id = SDX75_SLAVE_SERVICE_SNOC, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node xs_pcie_0 = { + .name = "xs_pcie_0", + .id = SDX75_SLAVE_PCIE_0, + .channels = 1, + .buswidth = 8, + .num_links = 0, +}; + +static struct qcom_icc_node xs_pcie_1 = { + .name = "xs_pcie_1", + .id = SDX75_SLAVE_PCIE_1, + .channels = 1, + .buswidth = 8, + .num_links = 0, +}; + +static struct qcom_icc_node xs_pcie_2 = { + .name = "xs_pcie_2", + .id = SDX75_SLAVE_PCIE_2, + .channels = 1, + .buswidth = 8, + .num_links = 0, +}; + +static struct qcom_icc_node xs_qdss_stm = { + .name = "xs_qdss_stm", + .id = SDX75_SLAVE_QDSS_STM, + .channels = 1, + .buswidth = 4, + .num_links = 0, +}; + +static struct qcom_icc_node xs_sys_tcu_cfg = { + .name = "xs_sys_tcu_cfg", + .id = SDX75_SLAVE_TCU, + .channels = 1, + .buswidth = 8, + .num_links = 0, +}; + +static struct qcom_icc_bcm bcm_ce0 = { + .name = "CE0", + .num_nodes = 1, + .nodes = { &qxm_crypto }, +}; + +static struct qcom_icc_bcm bcm_cn0 = { + .name = "CN0", + .keepalive = true, + .num_nodes = 39, + .nodes = { &qhm_pcie_rscc, &qnm_gemnoc_cnoc, + &ps_eth0_cfg, &ps_eth1_cfg, + &qhs_audio, &qhs_clk_ctl, + &qhs_crypto_cfg, &qhs_imem_cfg, + &qhs_ipa, &qhs_ipc_router, + &qhs_mss_cfg, &qhs_mvmss_cfg, + &qhs_pcie0_cfg, &qhs_pcie1_cfg, + &qhs_pcie2_cfg, &qhs_pcie_rscc, + &qhs_pdm, &qhs_prng, + &qhs_qdss_cfg, &qhs_qpic, + &qhs_qup0, &qhs_sdc1, + &qhs_sdc4, &qhs_spmi_vgi_coex, + &qhs_tcsr, &qhs_tlmm, + &qhs_usb3, &qhs_usb3_phy, + &qns_ddrss_cfg, &qns_system_noc_cfg, + &qns_system_noc_pcie_cfg, &qxs_imem, + &srvc_pcie_system_noc, &srvc_system_noc, + &xs_pcie_0, &xs_pcie_1, + &xs_pcie_2, &xs_qdss_stm, + &xs_sys_tcu_cfg }, +}; + +static struct qcom_icc_bcm bcm_mc0 = { + .name = "MC0", + .keepalive = true, + .num_nodes = 1, + .nodes = { &ebi }, +}; + +static struct qcom_icc_bcm bcm_qp0 = { + .name = "QP0", + .num_nodes = 1, + .nodes = { &qpic_core_slave }, +}; + +static struct qcom_icc_bcm bcm_qup0 = { + .name = "QUP0", + .keepalive = true, + .vote_scale = 1, + .num_nodes = 1, + .nodes = { &qup0_core_slave }, +}; + +static struct qcom_icc_bcm bcm_sh0 = { + .name = "SH0", + .keepalive = true, + .num_nodes = 1, + .nodes = { &qns_llcc }, +}; + +static struct qcom_icc_bcm bcm_sh1 = { + .name = "SH1", + .num_nodes = 10, + .nodes = { &alm_sys_tcu, &chm_apps, + &qnm_gemnoc_cfg, &qnm_mdsp, + &qnm_snoc_sf, &xm_gic, + &xm_ipa2pcie, &qns_gemnoc_cnoc, + &qns_pcie, &srvc_gemnoc }, +}; + +static struct qcom_icc_bcm bcm_sn0 = { + .name = "SN0", + .keepalive = true, + .num_nodes = 1, + .nodes = { &qns_gemnoc_sf }, +}; + +static struct qcom_icc_bcm bcm_sn1 = { + .name = "SN1", + .num_nodes = 21, + .nodes = { &xm_pcie3_0, &xm_pcie3_1, + &xm_pcie3_2, &qhm_audio, + &qhm_gic, &qhm_qdss_bam, + &qhm_qpic, &qhm_qup0, + &qnm_gemnoc_pcie, &qnm_system_noc_cfg, + &qnm_system_noc_pcie_cfg, &qxm_crypto, + &qxm_ipa, &qxm_mvmss, + &xm_emac_0, &xm_emac_1, + &xm_qdss_etr0, &xm_qdss_etr1, + &xm_sdc1, &xm_sdc4, + &xm_usb3 }, +}; + +static struct qcom_icc_bcm bcm_sn2 = { + .name = "SN2", + .num_nodes = 2, + .nodes = { &qnm_aggre_noc, &qns_a1noc }, +}; + +static struct qcom_icc_bcm bcm_sn4 = { + .name = "SN4", + .num_nodes = 2, + .nodes = { &qnm_pcie, &qns_pcie_gemnoc }, +}; + +static struct qcom_icc_bcm * const clk_virt_bcms[] = { + &bcm_qp0, + &bcm_qup0, +}; + +static struct qcom_icc_node * const clk_virt_nodes[] = { + [MASTER_QPIC_CORE] = &qpic_core_master, + [MASTER_QUP_CORE_0] = &qup0_core_master, + [SLAVE_QPIC_CORE] = &qpic_core_slave, + [SLAVE_QUP_CORE_0] = &qup0_core_slave, +}; + +static const struct qcom_icc_desc sdx75_clk_virt = { + .nodes = clk_virt_nodes, + .num_nodes = ARRAY_SIZE(clk_virt_nodes), + .bcms = clk_virt_bcms, + .num_bcms = ARRAY_SIZE(clk_virt_bcms), +}; + +static struct qcom_icc_node * const dc_noc_nodes[] = { + [MASTER_CNOC_DC_NOC] = &qnm_cnoc, + [SLAVE_LAGG_CFG] = &qhs_lagg, + [SLAVE_MCCC_MASTER] = &qhs_mccc_master, + [SLAVE_GEM_NOC_CFG] = &qns_gemnoc, + [SLAVE_SNOOP_BWMON] = &qss_snoop_bwmon, +}; + +static const struct qcom_icc_desc sdx75_dc_noc = { + .nodes = dc_noc_nodes, + .num_nodes = ARRAY_SIZE(dc_noc_nodes), +}; + +static struct qcom_icc_bcm * const gem_noc_bcms[] = { + &bcm_sh0, + &bcm_sh1, + &bcm_sn4, +}; + +static struct qcom_icc_node * const gem_noc_nodes[] = { + [MASTER_SYS_TCU] = &alm_sys_tcu, + [MASTER_APPSS_PROC] = &chm_apps, + [MASTER_GEM_NOC_CFG] = &qnm_gemnoc_cfg, + [MASTER_MSS_PROC] = &qnm_mdsp, + [MASTER_ANOC_PCIE_GEM_NOC] = &qnm_pcie, + [MASTER_SNOC_SF_MEM_NOC] = &qnm_snoc_sf, + [MASTER_GIC] = &xm_gic, + [MASTER_IPA_PCIE] = &xm_ipa2pcie, + [SLAVE_GEM_NOC_CNOC] = &qns_gemnoc_cnoc, + [SLAVE_LLCC] = &qns_llcc, + [SLAVE_MEM_NOC_PCIE_SNOC] = &qns_pcie, + [SLAVE_SERVICE_GEM_NOC] = &srvc_gemnoc, +}; + +static const struct qcom_icc_desc sdx75_gem_noc = { + .nodes = gem_noc_nodes, + .num_nodes = ARRAY_SIZE(gem_noc_nodes), + .bcms = gem_noc_bcms, + .num_bcms = ARRAY_SIZE(gem_noc_bcms), +}; + +static struct qcom_icc_bcm * const mc_virt_bcms[] = { + &bcm_mc0, +}; + +static struct qcom_icc_node * const mc_virt_nodes[] = { + [MASTER_LLCC] = &llcc_mc, + [SLAVE_EBI1] = &ebi, +}; + +static const struct qcom_icc_desc sdx75_mc_virt = { + .nodes = mc_virt_nodes, + .num_nodes = ARRAY_SIZE(mc_virt_nodes), + .bcms = mc_virt_bcms, + .num_bcms = ARRAY_SIZE(mc_virt_bcms), +}; + +static struct qcom_icc_bcm * const pcie_anoc_bcms[] = { + &bcm_sn1, + &bcm_sn4, +}; + +static struct qcom_icc_node * const pcie_anoc_nodes[] = { + [MASTER_PCIE_0] = &xm_pcie3_0, + [MASTER_PCIE_1] = &xm_pcie3_1, + [MASTER_PCIE_2] = &xm_pcie3_2, + [SLAVE_ANOC_PCIE_GEM_NOC] = &qns_pcie_gemnoc, +}; + +static const struct qcom_icc_desc sdx75_pcie_anoc = { + .nodes = pcie_anoc_nodes, + .num_nodes = ARRAY_SIZE(pcie_anoc_nodes), + .bcms = pcie_anoc_bcms, + .num_bcms = ARRAY_SIZE(pcie_anoc_bcms), +}; + +static struct qcom_icc_bcm * const system_noc_bcms[] = { + &bcm_ce0, + &bcm_cn0, + &bcm_sn0, + &bcm_sn1, + &bcm_sn2, +}; + +static struct qcom_icc_node * const system_noc_nodes[] = { + [MASTER_AUDIO] = &qhm_audio, + [MASTER_GIC_AHB] = &qhm_gic, + [MASTER_PCIE_RSCC] = &qhm_pcie_rscc, + [MASTER_QDSS_BAM] = &qhm_qdss_bam, + [MASTER_QPIC] = &qhm_qpic, + [MASTER_QUP_0] = &qhm_qup0, + [MASTER_ANOC_SNOC] = &qnm_aggre_noc, + [MASTER_GEM_NOC_CNOC] = &qnm_gemnoc_cnoc, + [MASTER_GEM_NOC_PCIE_SNOC] = &qnm_gemnoc_pcie, + [MASTER_SNOC_CFG] = &qnm_system_noc_cfg, + [MASTER_PCIE_ANOC_CFG] = &qnm_system_noc_pcie_cfg, + [MASTER_CRYPTO] = &qxm_crypto, + [MASTER_IPA] = &qxm_ipa, + [MASTER_MVMSS] = &qxm_mvmss, + [MASTER_EMAC_0] = &xm_emac_0, + [MASTER_EMAC_1] = &xm_emac_1, + [MASTER_QDSS_ETR] = &xm_qdss_etr0, + [MASTER_QDSS_ETR_1] = &xm_qdss_etr1, + [MASTER_SDCC_1] = &xm_sdc1, + [MASTER_SDCC_4] = &xm_sdc4, + [MASTER_USB3_0] = &xm_usb3, + [SLAVE_ETH0_CFG] = &ps_eth0_cfg, + [SLAVE_ETH1_CFG] = &ps_eth1_cfg, + [SLAVE_AUDIO] = &qhs_audio, + [SLAVE_CLK_CTL] = &qhs_clk_ctl, + [SLAVE_CRYPTO_0_CFG] = &qhs_crypto_cfg, + [SLAVE_IMEM_CFG] = &qhs_imem_cfg, + [SLAVE_IPA_CFG] = &qhs_ipa, + [SLAVE_IPC_ROUTER_CFG] = &qhs_ipc_router, + [SLAVE_CNOC_MSS] = &qhs_mss_cfg, + [SLAVE_ICBDI_MVMSS_CFG] = &qhs_mvmss_cfg, + [SLAVE_PCIE_0_CFG] = &qhs_pcie0_cfg, + [SLAVE_PCIE_1_CFG] = &qhs_pcie1_cfg, + [SLAVE_PCIE_2_CFG] = &qhs_pcie2_cfg, + [SLAVE_PCIE_RSC_CFG] = &qhs_pcie_rscc, + [SLAVE_PDM] = &qhs_pdm, + [SLAVE_PRNG] = &qhs_prng, + [SLAVE_QDSS_CFG] = &qhs_qdss_cfg, + [SLAVE_QPIC] = &qhs_qpic, + [SLAVE_QUP_0] = &qhs_qup0, + [SLAVE_SDCC_1] = &qhs_sdc1, + [SLAVE_SDCC_4] = &qhs_sdc4, + [SLAVE_SPMI_VGI_COEX] = &qhs_spmi_vgi_coex, + [SLAVE_TCSR] = &qhs_tcsr, + [SLAVE_TLMM] = &qhs_tlmm, + [SLAVE_USB3] = &qhs_usb3, + [SLAVE_USB3_PHY_CFG] = &qhs_usb3_phy, + [SLAVE_A1NOC_CFG] = &qns_a1noc, + [SLAVE_DDRSS_CFG] = &qns_ddrss_cfg, + [SLAVE_SNOC_GEM_NOC_SF] = &qns_gemnoc_sf, + [SLAVE_SNOC_CFG] = &qns_system_noc_cfg, + [SLAVE_PCIE_ANOC_CFG] = &qns_system_noc_pcie_cfg, + [SLAVE_IMEM] = &qxs_imem, + [SLAVE_SERVICE_PCIE_ANOC] = &srvc_pcie_system_noc, + [SLAVE_SERVICE_SNOC] = &srvc_system_noc, + [SLAVE_PCIE_0] = &xs_pcie_0, + [SLAVE_PCIE_1] = &xs_pcie_1, + [SLAVE_PCIE_2] = &xs_pcie_2, + [SLAVE_QDSS_STM] = &xs_qdss_stm, + [SLAVE_TCU] = &xs_sys_tcu_cfg, +}; + +static const struct qcom_icc_desc sdx75_system_noc = { + .nodes = system_noc_nodes, + .num_nodes = ARRAY_SIZE(system_noc_nodes), + .bcms = system_noc_bcms, + .num_bcms = ARRAY_SIZE(system_noc_bcms), +}; + +static const struct of_device_id qnoc_of_match[] = { + { .compatible = "qcom,sdx75-clk-virt", .data = &sdx75_clk_virt }, + { .compatible = "qcom,sdx75-dc-noc", .data = &sdx75_dc_noc }, + { .compatible = "qcom,sdx75-gem-noc", .data = &sdx75_gem_noc }, + { .compatible = "qcom,sdx75-mc-virt", .data = &sdx75_mc_virt }, + { .compatible = "qcom,sdx75-pcie-anoc", .data = &sdx75_pcie_anoc }, + { .compatible = "qcom,sdx75-system-noc", .data = &sdx75_system_noc }, + { } +}; +MODULE_DEVICE_TABLE(of, qnoc_of_match); + +static struct platform_driver qnoc_driver = { + .probe = qcom_icc_rpmh_probe, + .remove_new = qcom_icc_rpmh_remove, + .driver = { + .name = "qnoc-sdx75", + .of_match_table = qnoc_of_match, + .sync_state = icc_sync_state, + }, +}; + +static int __init qnoc_driver_init(void) +{ + return platform_driver_register(&qnoc_driver); +} +core_initcall(qnoc_driver_init); + +static void __exit qnoc_driver_exit(void) +{ + platform_driver_unregister(&qnoc_driver); +} +module_exit(qnoc_driver_exit); + +MODULE_DESCRIPTION("SDX75 NoC driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/interconnect/qcom/sdx75.h b/drivers/interconnect/qcom/sdx75.h new file mode 100644 index 000000000000..24e887159920 --- /dev/null +++ b/drivers/interconnect/qcom/sdx75.h @@ -0,0 +1,97 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#ifndef __DRIVERS_INTERCONNECT_QCOM_SDX75_H +#define __DRIVERS_INTERCONNECT_QCOM_SDX75_H + +#define SDX75_MASTER_ANOC_PCIE_GEM_NOC 0 +#define SDX75_MASTER_ANOC_SNOC 1 +#define SDX75_MASTER_APPSS_PROC 2 +#define SDX75_MASTER_AUDIO 3 +#define SDX75_MASTER_CNOC_DC_NOC 4 +#define SDX75_MASTER_CRYPTO 5 +#define SDX75_MASTER_EMAC_0 6 +#define SDX75_MASTER_EMAC_1 7 +#define SDX75_MASTER_GEM_NOC_CFG 8 +#define SDX75_MASTER_GEM_NOC_CNOC 9 +#define SDX75_MASTER_GEM_NOC_PCIE_SNOC 10 +#define SDX75_MASTER_GIC 11 +#define SDX75_MASTER_GIC_AHB 12 +#define SDX75_MASTER_IPA 13 +#define SDX75_MASTER_IPA_PCIE 14 +#define SDX75_MASTER_LLCC 15 +#define SDX75_MASTER_MSS_PROC 16 +#define SDX75_MASTER_MVMSS 17 +#define SDX75_MASTER_PCIE_0 18 +#define SDX75_MASTER_PCIE_1 19 +#define SDX75_MASTER_PCIE_2 20 +#define SDX75_MASTER_PCIE_ANOC_CFG 21 +#define SDX75_MASTER_PCIE_RSCC 22 +#define SDX75_MASTER_QDSS_BAM 23 +#define SDX75_MASTER_QDSS_ETR 24 +#define SDX75_MASTER_QDSS_ETR_1 25 +#define SDX75_MASTER_QPIC 26 +#define SDX75_MASTER_QPIC_CORE 27 +#define SDX75_MASTER_QUP_0 28 +#define SDX75_MASTER_QUP_CORE_0 29 +#define SDX75_MASTER_SDCC_1 30 +#define SDX75_MASTER_SDCC_4 31 +#define SDX75_MASTER_SNOC_CFG 32 +#define SDX75_MASTER_SNOC_SF_MEM_NOC 33 +#define SDX75_MASTER_SYS_TCU 34 +#define SDX75_MASTER_USB3_0 35 +#define SDX75_SLAVE_A1NOC_CFG 36 +#define SDX75_SLAVE_ANOC_PCIE_GEM_NOC 37 +#define SDX75_SLAVE_AUDIO 38 +#define SDX75_SLAVE_CLK_CTL 39 +#define SDX75_SLAVE_CRYPTO_0_CFG 40 +#define SDX75_SLAVE_CNOC_MSS 41 +#define SDX75_SLAVE_DDRSS_CFG 42 +#define SDX75_SLAVE_EBI1 43 +#define SDX75_SLAVE_ETH0_CFG 44 +#define SDX75_SLAVE_ETH1_CFG 45 +#define SDX75_SLAVE_GEM_NOC_CFG 46 +#define SDX75_SLAVE_GEM_NOC_CNOC 47 +#define SDX75_SLAVE_ICBDI_MVMSS_CFG 48 +#define SDX75_SLAVE_IMEM 49 +#define SDX75_SLAVE_IMEM_CFG 50 +#define SDX75_SLAVE_IPA_CFG 51 +#define SDX75_SLAVE_IPC_ROUTER_CFG 52 +#define SDX75_SLAVE_LAGG_CFG 53 +#define SDX75_SLAVE_LLCC 54 +#define SDX75_SLAVE_MCCC_MASTER 55 +#define SDX75_SLAVE_MEM_NOC_PCIE_SNOC 56 +#define SDX75_SLAVE_PCIE_0 57 +#define SDX75_SLAVE_PCIE_1 58 +#define SDX75_SLAVE_PCIE_2 59 +#define SDX75_SLAVE_PCIE_0_CFG 60 +#define SDX75_SLAVE_PCIE_1_CFG 61 +#define SDX75_SLAVE_PCIE_2_CFG 62 +#define SDX75_SLAVE_PCIE_ANOC_CFG 63 +#define SDX75_SLAVE_PCIE_RSC_CFG 64 +#define SDX75_SLAVE_PDM 65 +#define SDX75_SLAVE_PRNG 66 +#define SDX75_SLAVE_QDSS_CFG 67 +#define SDX75_SLAVE_QDSS_STM 68 +#define SDX75_SLAVE_QPIC 69 +#define SDX75_SLAVE_QPIC_CORE 70 +#define SDX75_SLAVE_QUP_0 71 +#define SDX75_SLAVE_QUP_CORE_0 72 +#define SDX75_SLAVE_SDCC_1 73 +#define SDX75_SLAVE_SDCC_4 74 +#define SDX75_SLAVE_SERVICE_GEM_NOC 75 +#define SDX75_SLAVE_SERVICE_PCIE_ANOC 76 +#define SDX75_SLAVE_SERVICE_SNOC 77 +#define SDX75_SLAVE_SNOC_CFG 78 +#define SDX75_SLAVE_SNOC_GEM_NOC_SF 79 +#define SDX75_SLAVE_SNOOP_BWMON 80 +#define SDX75_SLAVE_SPMI_VGI_COEX 81 +#define SDX75_SLAVE_TCSR 82 +#define SDX75_SLAVE_TCU 83 +#define SDX75_SLAVE_TLMM 84 +#define SDX75_SLAVE_USB3 85 +#define SDX75_SLAVE_USB3_PHY_CFG 86 + +#endif diff --git a/drivers/interconnect/qcom/sm6350.c b/drivers/interconnect/qcom/sm6350.c index 49aed492e9b8..20923e8e6110 100644 --- a/drivers/interconnect/qcom/sm6350.c +++ b/drivers/interconnect/qcom/sm6350.c @@ -1164,6 +1164,7 @@ static struct qcom_icc_node xs_sys_tcu_cfg = { static struct qcom_icc_bcm bcm_acv = { .name = "ACV", + .enable_mask = BIT(3), .keepalive = false, .num_nodes = 1, .nodes = { &ebi }, @@ -1701,7 +1702,7 @@ MODULE_DEVICE_TABLE(of, qnoc_of_match); static struct platform_driver qnoc_driver = { .probe = qcom_icc_rpmh_probe, - .remove = qcom_icc_rpmh_remove, + .remove_new = qcom_icc_rpmh_remove, .driver = { .name = "qnoc-sm6350", .of_match_table = qnoc_of_match, diff --git a/drivers/interconnect/qcom/sm8150.c b/drivers/interconnect/qcom/sm8150.c index c7c9cf7f746b..f29b77556a79 100644 --- a/drivers/interconnect/qcom/sm8150.c +++ b/drivers/interconnect/qcom/sm8150.c @@ -1282,6 +1282,7 @@ static struct qcom_icc_node xs_sys_tcu_cfg = { static struct qcom_icc_bcm bcm_acv = { .name = "ACV", + .enable_mask = BIT(3), .keepalive = false, .num_nodes = 1, .nodes = { &ebi }, @@ -1863,7 +1864,7 @@ MODULE_DEVICE_TABLE(of, qnoc_of_match); static struct platform_driver qnoc_driver = { .probe = qcom_icc_rpmh_probe, - .remove = qcom_icc_rpmh_remove, + .remove_new = qcom_icc_rpmh_remove, .driver = { .name = "qnoc-sm8150", .of_match_table = qnoc_of_match, diff --git a/drivers/interconnect/qcom/sm8250.c b/drivers/interconnect/qcom/sm8250.c index d4a4ecef11f0..83aeb3eedc19 100644 --- a/drivers/interconnect/qcom/sm8250.c +++ b/drivers/interconnect/qcom/sm8250.c @@ -1397,6 +1397,7 @@ static struct qcom_icc_node qup2_core_slave = { static struct qcom_icc_bcm bcm_acv = { .name = "ACV", + .enable_mask = BIT(3), .keepalive = false, .num_nodes = 1, .nodes = { &ebi }, @@ -1990,7 +1991,7 @@ MODULE_DEVICE_TABLE(of, qnoc_of_match); static struct platform_driver qnoc_driver = { .probe = qcom_icc_rpmh_probe, - .remove = qcom_icc_rpmh_remove, + .remove_new = qcom_icc_rpmh_remove, .driver = { .name = "qnoc-sm8250", .of_match_table = qnoc_of_match, diff --git a/drivers/interconnect/qcom/sm8350.c b/drivers/interconnect/qcom/sm8350.c index bdf75839e6d1..b321c3009acb 100644 --- a/drivers/interconnect/qcom/sm8350.c +++ b/drivers/interconnect/qcom/sm8350.c @@ -1356,6 +1356,7 @@ static struct qcom_icc_node qns_mem_noc_sf_disp = { static struct qcom_icc_bcm bcm_acv = { .name = "ACV", + .enable_mask = BIT(3), .keepalive = false, .num_nodes = 1, .nodes = { &ebi }, @@ -1960,7 +1961,7 @@ MODULE_DEVICE_TABLE(of, qnoc_of_match); static struct platform_driver qnoc_driver = { .probe = qcom_icc_rpmh_probe, - .remove = qcom_icc_rpmh_remove, + .remove_new = qcom_icc_rpmh_remove, .driver = { .name = "qnoc-sm8350", .of_match_table = qnoc_of_match, diff --git a/drivers/interconnect/qcom/sm8450.c b/drivers/interconnect/qcom/sm8450.c index eb7e17df32ba..b3cd0087377c 100644 --- a/drivers/interconnect/qcom/sm8450.c +++ b/drivers/interconnect/qcom/sm8450.c @@ -1884,7 +1884,7 @@ MODULE_DEVICE_TABLE(of, qnoc_of_match); static struct platform_driver qnoc_driver = { .probe = qcom_icc_rpmh_probe, - .remove = qcom_icc_rpmh_remove, + .remove_new = qcom_icc_rpmh_remove, .driver = { .name = "qnoc-sm8450", .of_match_table = qnoc_of_match, diff --git a/drivers/interconnect/qcom/sm8550.c b/drivers/interconnect/qcom/sm8550.c index a10c8b6549ee..629faa4c9aae 100644 --- a/drivers/interconnect/qcom/sm8550.c +++ b/drivers/interconnect/qcom/sm8550.c @@ -2219,7 +2219,7 @@ MODULE_DEVICE_TABLE(of, qnoc_of_match); static struct platform_driver qnoc_driver = { .probe = qcom_icc_rpmh_probe, - .remove = qcom_icc_rpmh_remove, + .remove_new = qcom_icc_rpmh_remove, .driver = { .name = "qnoc-sm8550", .of_match_table = qnoc_of_match, diff --git a/drivers/mcb/mcb-core.c b/drivers/mcb/mcb-core.c index 0cac5bead84f..ba4530459de8 100644 --- a/drivers/mcb/mcb-core.c +++ b/drivers/mcb/mcb-core.c @@ -246,6 +246,7 @@ int mcb_device_register(struct mcb_bus *bus, struct mcb_device *dev) return 0; out: + put_device(&dev->dev); return ret; } @@ -288,7 +289,7 @@ struct mcb_bus *mcb_alloc_bus(struct device *carrier) bus->dev.parent = carrier; bus->dev.bus = &mcb_bus_type; bus->dev.type = &mcb_carrier_device_type; - bus->dev.release = &mcb_free_bus; + bus->dev.release = mcb_free_bus; dev_set_name(&bus->dev, "mcb:%d", bus_nr); rc = device_add(&bus->dev); @@ -311,7 +312,7 @@ static int __mcb_devices_unregister(struct device *dev, void *data) static void mcb_devices_unregister(struct mcb_bus *bus) { - bus_for_each_dev(&mcb_bus_type, NULL, NULL, __mcb_devices_unregister); + bus_for_each_dev(bus->dev.bus, NULL, NULL, __mcb_devices_unregister); } /** * mcb_release_bus() - Free a @mcb_bus @@ -406,7 +407,7 @@ static int __mcb_bus_add_devices(struct device *dev, void *data) */ void mcb_bus_add_devices(const struct mcb_bus *bus) { - bus_for_each_dev(&mcb_bus_type, NULL, NULL, __mcb_bus_add_devices); + bus_for_each_dev(bus->dev.bus, NULL, NULL, __mcb_bus_add_devices); } EXPORT_SYMBOL_NS_GPL(mcb_bus_add_devices, MCB); diff --git a/drivers/mcb/mcb-parse.c b/drivers/mcb/mcb-parse.c index 656b6b71c768..1ae37e693de0 100644 --- a/drivers/mcb/mcb-parse.c +++ b/drivers/mcb/mcb-parse.c @@ -106,7 +106,7 @@ static int chameleon_parse_gdd(struct mcb_bus *bus, return 0; err: - put_device(&mdev->dev); + mcb_free_dev(mdev); return ret; } diff --git a/drivers/misc/bcm-vk/bcm_vk_msg.c b/drivers/misc/bcm-vk/bcm_vk_msg.c index e17d81231ea6..1f42d1d5a630 100644 --- a/drivers/misc/bcm-vk/bcm_vk_msg.c +++ b/drivers/misc/bcm-vk/bcm_vk_msg.c @@ -703,12 +703,12 @@ int bcm_vk_send_shutdown_msg(struct bcm_vk *vk, u32 shut_type, entry = kzalloc(struct_size(entry, to_v_msg, 1), GFP_KERNEL); if (!entry) return -ENOMEM; + entry->to_v_blks = 1; /* always 1 block */ /* fill up necessary data */ entry->to_v_msg[0].function_id = VK_FID_SHUTDOWN; set_q_num(&entry->to_v_msg[0], q_num); set_msg_id(&entry->to_v_msg[0], VK_SIMPLEX_MSG_ID); - entry->to_v_blks = 1; /* always 1 block */ entry->to_v_msg[0].cmd = shut_type; entry->to_v_msg[0].arg = pid; diff --git a/drivers/misc/bcm-vk/bcm_vk_msg.h b/drivers/misc/bcm-vk/bcm_vk_msg.h index 56784c8896d8..157495e48f15 100644 --- a/drivers/misc/bcm-vk/bcm_vk_msg.h +++ b/drivers/misc/bcm-vk/bcm_vk_msg.h @@ -116,7 +116,7 @@ struct bcm_vk_wkent { u32 usr_msg_id; u32 to_v_blks; u32 seq_num; - struct vk_msg_blk to_v_msg[]; + struct vk_msg_blk to_v_msg[] __counted_by(to_v_blks); }; /* queue stats counters */ diff --git a/drivers/misc/c2port/core.c b/drivers/misc/c2port/core.c index f574c83b82cf..2bb1dd2511f9 100644 --- a/drivers/misc/c2port/core.c +++ b/drivers/misc/c2port/core.c @@ -923,7 +923,7 @@ struct c2port_device *c2port_device_register(char *name, } dev_set_drvdata(c2dev->dev, c2dev); - strncpy(c2dev->name, name, C2PORT_NAME_LEN - 1); + strscpy(c2dev->name, name, sizeof(c2dev->name)); c2dev->ops = ops; mutex_init(&c2dev->mutex); diff --git a/drivers/misc/cxl/file.c b/drivers/misc/cxl/file.c index 144d1f2d78ce..012e11b959bc 100644 --- a/drivers/misc/cxl/file.c +++ b/drivers/misc/cxl/file.c @@ -38,8 +38,6 @@ static dev_t cxl_dev; -static struct class *cxl_class; - static int __afu_open(struct inode *inode, struct file *file, bool master) { struct cxl *adapter; @@ -559,7 +557,10 @@ static char *cxl_devnode(const struct device *dev, umode_t *mode) return kasprintf(GFP_KERNEL, "cxl/%s", dev_name(dev)); } -extern struct class *cxl_class; +static const struct class cxl_class = { + .name = "cxl", + .devnode = cxl_devnode, +}; static int cxl_add_chardev(struct cxl_afu *afu, dev_t devt, struct cdev *cdev, struct device **chardev, char *postfix, char *desc, @@ -575,7 +576,7 @@ static int cxl_add_chardev(struct cxl_afu *afu, dev_t devt, struct cdev *cdev, return rc; } - dev = device_create(cxl_class, &afu->dev, devt, afu, + dev = device_create(&cxl_class, &afu->dev, devt, afu, "afu%i.%i%s", afu->adapter->adapter_num, afu->slice, postfix); if (IS_ERR(dev)) { rc = PTR_ERR(dev); @@ -633,14 +634,14 @@ void cxl_chardev_afu_remove(struct cxl_afu *afu) int cxl_register_afu(struct cxl_afu *afu) { - afu->dev.class = cxl_class; + afu->dev.class = &cxl_class; return device_register(&afu->dev); } int cxl_register_adapter(struct cxl *adapter) { - adapter->dev.class = cxl_class; + adapter->dev.class = &cxl_class; /* * Future: When we support dynamically reprogramming the PSL & AFU we @@ -678,13 +679,11 @@ int __init cxl_file_init(void) pr_devel("CXL device allocated, MAJOR %i\n", MAJOR(cxl_dev)); - cxl_class = class_create("cxl"); - if (IS_ERR(cxl_class)) { + rc = class_register(&cxl_class); + if (rc) { pr_err("Unable to create CXL class\n"); - rc = PTR_ERR(cxl_class); goto err; } - cxl_class->devnode = cxl_devnode; return 0; @@ -696,5 +695,5 @@ err: void cxl_file_exit(void) { unregister_chrdev_region(cxl_dev, CXL_NUM_MINORS); - class_destroy(cxl_class); + class_unregister(&cxl_class); } diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig index 2d240bfa819f..4e61ac18cc96 100644 --- a/drivers/misc/eeprom/Kconfig +++ b/drivers/misc/eeprom/Kconfig @@ -46,20 +46,6 @@ config EEPROM_AT25 This driver can also be built as a module. If so, the module will be called at25. -config EEPROM_LEGACY - tristate "Old I2C EEPROM reader (DEPRECATED)" - depends on I2C && SYSFS - help - If you say yes here you get read-only access to the EEPROM data - available on modern memory DIMMs and Sony Vaio laptops via I2C. Such - EEPROMs could theoretically be available on other devices as well. - - This driver is deprecated and will be removed soon, please use the - better at24 driver instead. - - This driver can also be built as a module. If so, the module - will be called eeprom. - config EEPROM_MAX6875 tristate "Maxim MAX6874/5 power supply supervisor" depends on I2C diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile index a9b4b6579b75..65794e526d5d 100644 --- a/drivers/misc/eeprom/Makefile +++ b/drivers/misc/eeprom/Makefile @@ -1,7 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_EEPROM_AT24) += at24.o obj-$(CONFIG_EEPROM_AT25) += at25.o -obj-$(CONFIG_EEPROM_LEGACY) += eeprom.o obj-$(CONFIG_EEPROM_MAX6875) += max6875.o obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o obj-$(CONFIG_EEPROM_93XX46) += eeprom_93xx46.o diff --git a/drivers/misc/eeprom/eeprom.c b/drivers/misc/eeprom/eeprom.c deleted file mode 100644 index ccb7c2f7ee2f..000000000000 --- a/drivers/misc/eeprom/eeprom.c +++ /dev/null @@ -1,214 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and - * Philip Edelbrock <phil@netroedge.com> - * Copyright (C) 2003 Greg Kroah-Hartman <greg@kroah.com> - * Copyright (C) 2003 IBM Corp. - * Copyright (C) 2004 Jean Delvare <jdelvare@suse.de> - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/device.h> -#include <linux/capability.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/mutex.h> - -/* Addresses to scan */ -static const unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54, - 0x55, 0x56, 0x57, I2C_CLIENT_END }; - - -/* Size of EEPROM in bytes */ -#define EEPROM_SIZE 256 - -/* possible types of eeprom devices */ -enum eeprom_nature { - UNKNOWN, - VAIO, -}; - -/* Each client has this additional data */ -struct eeprom_data { - struct mutex update_lock; - u8 valid; /* bitfield, bit!=0 if slice is valid */ - unsigned long last_updated[8]; /* In jiffies, 8 slices */ - u8 data[EEPROM_SIZE]; /* Register values */ - enum eeprom_nature nature; -}; - - -static void eeprom_update_client(struct i2c_client *client, u8 slice) -{ - struct eeprom_data *data = i2c_get_clientdata(client); - int i; - - mutex_lock(&data->update_lock); - - if (!(data->valid & (1 << slice)) || - time_after(jiffies, data->last_updated[slice] + 300 * HZ)) { - dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice); - - if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { - for (i = slice << 5; i < (slice + 1) << 5; i += 32) - if (i2c_smbus_read_i2c_block_data(client, i, - 32, data->data + i) - != 32) - goto exit; - } else { - for (i = slice << 5; i < (slice + 1) << 5; i += 2) { - int word = i2c_smbus_read_word_data(client, i); - if (word < 0) - goto exit; - data->data[i] = word & 0xff; - data->data[i + 1] = word >> 8; - } - } - data->last_updated[slice] = jiffies; - data->valid |= (1 << slice); - } -exit: - mutex_unlock(&data->update_lock); -} - -static ssize_t eeprom_read(struct file *filp, struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t off, size_t count) -{ - struct i2c_client *client = kobj_to_i2c_client(kobj); - struct eeprom_data *data = i2c_get_clientdata(client); - u8 slice; - - /* Only refresh slices which contain requested bytes */ - for (slice = off >> 5; slice <= (off + count - 1) >> 5; slice++) - eeprom_update_client(client, slice); - - /* Hide Vaio private settings to regular users: - - BIOS passwords: bytes 0x00 to 0x0f - - UUID: bytes 0x10 to 0x1f - - Serial number: 0xc0 to 0xdf */ - if (data->nature == VAIO && !capable(CAP_SYS_ADMIN)) { - int i; - - for (i = 0; i < count; i++) { - if ((off + i <= 0x1f) || - (off + i >= 0xc0 && off + i <= 0xdf)) - buf[i] = 0; - else - buf[i] = data->data[off + i]; - } - } else { - memcpy(buf, &data->data[off], count); - } - - return count; -} - -static const struct bin_attribute eeprom_attr = { - .attr = { - .name = "eeprom", - .mode = S_IRUGO, - }, - .size = EEPROM_SIZE, - .read = eeprom_read, -}; - -/* Return 0 if detection is successful, -ENODEV otherwise */ -static int eeprom_detect(struct i2c_client *client, struct i2c_board_info *info) -{ - struct i2c_adapter *adapter = client->adapter; - - /* EDID EEPROMs are often 24C00 EEPROMs, which answer to all - addresses 0x50-0x57, but we only care about 0x50. So decline - attaching to addresses >= 0x51 on DDC buses */ - if (!(adapter->class & I2C_CLASS_SPD) && client->addr >= 0x51) - return -ENODEV; - - /* There are four ways we can read the EEPROM data: - (1) I2C block reads (faster, but unsupported by most adapters) - (2) Word reads (128% overhead) - (3) Consecutive byte reads (88% overhead, unsafe) - (4) Regular byte data reads (265% overhead) - The third and fourth methods are not implemented by this driver - because all known adapters support one of the first two. */ - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_WORD_DATA) - && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) - return -ENODEV; - - strscpy(info->type, "eeprom", I2C_NAME_SIZE); - - return 0; -} - -static int eeprom_probe(struct i2c_client *client) -{ - struct i2c_adapter *adapter = client->adapter; - struct eeprom_data *data; - - data = devm_kzalloc(&client->dev, sizeof(struct eeprom_data), - GFP_KERNEL); - if (!data) - return -ENOMEM; - - memset(data->data, 0xff, EEPROM_SIZE); - i2c_set_clientdata(client, data); - mutex_init(&data->update_lock); - data->nature = UNKNOWN; - - /* Detect the Vaio nature of EEPROMs. - We use the "PCG-" or "VGN-" prefix as the signature. */ - if (client->addr == 0x57 - && i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA)) { - char name[4]; - - name[0] = i2c_smbus_read_byte_data(client, 0x80); - name[1] = i2c_smbus_read_byte_data(client, 0x81); - name[2] = i2c_smbus_read_byte_data(client, 0x82); - name[3] = i2c_smbus_read_byte_data(client, 0x83); - - if (!memcmp(name, "PCG-", 4) || !memcmp(name, "VGN-", 4)) { - dev_info(&client->dev, "Vaio EEPROM detected, " - "enabling privacy protection\n"); - data->nature = VAIO; - } - } - - /* Let the users know they are using deprecated driver */ - dev_notice(&client->dev, - "eeprom driver is deprecated, please use at24 instead\n"); - - /* create the sysfs eeprom file */ - return sysfs_create_bin_file(&client->dev.kobj, &eeprom_attr); -} - -static void eeprom_remove(struct i2c_client *client) -{ - sysfs_remove_bin_file(&client->dev.kobj, &eeprom_attr); -} - -static const struct i2c_device_id eeprom_id[] = { - { "eeprom", 0 }, - { } -}; - -static struct i2c_driver eeprom_driver = { - .driver = { - .name = "eeprom", - }, - .probe = eeprom_probe, - .remove = eeprom_remove, - .id_table = eeprom_id, - - .class = I2C_CLASS_DDC | I2C_CLASS_SPD, - .detect = eeprom_detect, - .address_list = normal_i2c, -}; - -module_i2c_driver(eeprom_driver); - -MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and " - "Philip Edelbrock <phil@netroedge.com> and " - "Greg Kroah-Hartman <greg@kroah.com>"); -MODULE_DESCRIPTION("I2C EEPROM driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/misc/eeprom/idt_89hpesx.c b/drivers/misc/eeprom/idt_89hpesx.c index 1d1f30b5c426..d807d08e2614 100644 --- a/drivers/misc/eeprom/idt_89hpesx.c +++ b/drivers/misc/eeprom/idt_89hpesx.c @@ -905,7 +905,7 @@ static ssize_t idt_dbgfs_csr_write(struct file *filep, const char __user *ubuf, { struct idt_89hpesx_dev *pdev = filep->private_data; char *colon_ch, *csraddr_str, *csrval_str; - int ret, csraddr_len; + int ret; u32 csraddr, csrval; char *buf; @@ -927,21 +927,16 @@ static ssize_t idt_dbgfs_csr_write(struct file *filep, const char __user *ubuf, * no new CSR value */ if (colon_ch != NULL) { - csraddr_len = colon_ch - buf; - csraddr_str = - kmalloc(csraddr_len + 1, GFP_KERNEL); + /* Copy the register address to the substring buffer */ + csraddr_str = kmemdup_nul(buf, colon_ch - buf, GFP_KERNEL); if (csraddr_str == NULL) { ret = -ENOMEM; goto free_buf; } - /* Copy the register address to the substring buffer */ - strncpy(csraddr_str, buf, csraddr_len); - csraddr_str[csraddr_len] = '\0'; /* Register value must follow the colon */ csrval_str = colon_ch + 1; } else /* if (str_colon == NULL) */ { csraddr_str = (char *)buf; /* Just to shut warning up */ - csraddr_len = strnlen(csraddr_str, count); csrval_str = NULL; } diff --git a/drivers/misc/ibmvmc.c b/drivers/misc/ibmvmc.c index 7739b783c2db..e5f935b5249d 100644 --- a/drivers/misc/ibmvmc.c +++ b/drivers/misc/ibmvmc.c @@ -1249,9 +1249,7 @@ static long ibmvmc_ioctl_sethmcid(struct ibmvmc_file_session *session, return -EIO; } - /* Make sure buffer is NULL terminated before trying to print it */ - memset(print_buffer, 0, HMC_ID_LEN + 1); - strncpy(print_buffer, hmc->hmc_id, HMC_ID_LEN); + strscpy(print_buffer, hmc->hmc_id, sizeof(print_buffer)); pr_info("ibmvmc: sethmcid: Set HMC ID: \"%s\"\n", print_buffer); memcpy(buffer->real_addr_local, hmc->hmc_id, HMC_ID_LEN); diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c index 2e65ce6bdec7..f9bcff197615 100644 --- a/drivers/misc/mei/bus.c +++ b/drivers/misc/mei/bus.c @@ -257,7 +257,7 @@ out: } /** - * mei_cldev_send_vtag - me device send with vtag (write) + * mei_cldev_send_vtag - me device send with vtag (write) * * @cldev: me client device * @buf: buffer to send @@ -279,6 +279,29 @@ ssize_t mei_cldev_send_vtag(struct mei_cl_device *cldev, const u8 *buf, EXPORT_SYMBOL_GPL(mei_cldev_send_vtag); /** + * mei_cldev_send_vtag_timeout - me device send with vtag and timeout (write) + * + * @cldev: me client device + * @buf: buffer to send + * @length: buffer length + * @vtag: virtual tag + * @timeout: send timeout in milliseconds, 0 for infinite timeout + * + * Return: + * * written size in bytes + * * < 0 on error + */ + +ssize_t mei_cldev_send_vtag_timeout(struct mei_cl_device *cldev, const u8 *buf, + size_t length, u8 vtag, unsigned long timeout) +{ + struct mei_cl *cl = cldev->cl; + + return __mei_cl_send_timeout(cl, buf, length, vtag, MEI_CL_IO_TX_BLOCKING, timeout); +} +EXPORT_SYMBOL_GPL(mei_cldev_send_vtag_timeout); + +/** * mei_cldev_recv_vtag - client receive with vtag (read) * * @cldev: me client device @@ -323,7 +346,49 @@ ssize_t mei_cldev_recv_nonblock_vtag(struct mei_cl_device *cldev, u8 *buf, EXPORT_SYMBOL_GPL(mei_cldev_recv_nonblock_vtag); /** - * mei_cldev_send - me device send (write) + * mei_cldev_recv_timeout - client receive with timeout (read) + * + * @cldev: me client device + * @buf: buffer to receive + * @length: buffer length + * @timeout: send timeout in milliseconds, 0 for infinite timeout + * + * Return: + * * read size in bytes + * * < 0 on error + */ +ssize_t mei_cldev_recv_timeout(struct mei_cl_device *cldev, u8 *buf, size_t length, + unsigned long timeout) +{ + return mei_cldev_recv_vtag_timeout(cldev, buf, length, NULL, timeout); +} +EXPORT_SYMBOL_GPL(mei_cldev_recv_timeout); + +/** + * mei_cldev_recv_vtag_timeout - client receive with vtag (read) + * + * @cldev: me client device + * @buf: buffer to receive + * @length: buffer length + * @vtag: virtual tag + * @timeout: recv timeout in milliseconds, 0 for infinite timeout + * + * Return: + * * read size in bytes + * * < 0 on error + */ + +ssize_t mei_cldev_recv_vtag_timeout(struct mei_cl_device *cldev, u8 *buf, size_t length, + u8 *vtag, unsigned long timeout) +{ + struct mei_cl *cl = cldev->cl; + + return __mei_cl_recv(cl, buf, length, vtag, 0, timeout); +} +EXPORT_SYMBOL_GPL(mei_cldev_recv_vtag_timeout); + +/** + * mei_cldev_send - me device send (write) * * @cldev: me client device * @buf: buffer to send @@ -340,6 +405,25 @@ ssize_t mei_cldev_send(struct mei_cl_device *cldev, const u8 *buf, size_t length EXPORT_SYMBOL_GPL(mei_cldev_send); /** + * mei_cldev_send_timeout - me device send with timeout (write) + * + * @cldev: me client device + * @buf: buffer to send + * @length: buffer length + * @timeout: send timeout in milliseconds, 0 for infinite timeout + * + * Return: + * * written size in bytes + * * < 0 on error + */ +ssize_t mei_cldev_send_timeout(struct mei_cl_device *cldev, const u8 *buf, size_t length, + unsigned long timeout) +{ + return mei_cldev_send_vtag_timeout(cldev, buf, length, 0, timeout); +} +EXPORT_SYMBOL_GPL(mei_cldev_send_timeout); + +/** * mei_cldev_recv - client receive (read) * * @cldev: me client device @@ -1301,7 +1385,7 @@ static inline void mei_cl_bus_set_name(struct mei_cl_device *cldev) * @bus: mei device * @me_cl: me client * - * Return: allocated device structur or NULL on allocation failure + * Return: allocated device structure or NULL on allocation failure */ static struct mei_cl_device *mei_cl_bus_dev_alloc(struct mei_device *bus, struct mei_me_client *me_cl) @@ -1361,7 +1445,7 @@ static bool mei_cl_bus_dev_setup(struct mei_device *bus, * * @cldev: me client device * - * Return: 0 on success; < 0 on failre + * Return: 0 on success; < 0 on failure */ static int mei_cl_bus_dev_add(struct mei_cl_device *cldev) { diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c index 5c19097266fe..9c8fc87938a7 100644 --- a/drivers/misc/mei/client.c +++ b/drivers/misc/mei/client.c @@ -48,9 +48,9 @@ struct mei_me_client *mei_me_cl_get(struct mei_me_client *me_cl) /** * mei_me_cl_release - free me client * - * Locking: called under "dev->device_lock" lock - * * @ref: me_client refcount + * + * Locking: called under "dev->device_lock" lock */ static void mei_me_cl_release(struct kref *ref) { @@ -63,9 +63,9 @@ static void mei_me_cl_release(struct kref *ref) /** * mei_me_cl_put - decrease me client refcount and free client if necessary * - * Locking: called under "dev->device_lock" lock - * * @me_cl: me client + * + * Locking: called under "dev->device_lock" lock */ void mei_me_cl_put(struct mei_me_client *me_cl) { @@ -329,10 +329,10 @@ void mei_io_cb_free(struct mei_cl_cb *cb) /** * mei_tx_cb_enqueue - queue tx callback * - * Locking: called under "dev->device_lock" lock - * * @cb: mei callback struct * @head: an instance of list to queue on + * + * Locking: called under "dev->device_lock" lock */ static inline void mei_tx_cb_enqueue(struct mei_cl_cb *cb, struct list_head *head) @@ -344,9 +344,9 @@ static inline void mei_tx_cb_enqueue(struct mei_cl_cb *cb, /** * mei_tx_cb_dequeue - dequeue tx callback * - * Locking: called under "dev->device_lock" lock - * * @cb: mei callback struct to dequeue and free + * + * Locking: called under "dev->device_lock" lock */ static inline void mei_tx_cb_dequeue(struct mei_cl_cb *cb) { @@ -359,10 +359,10 @@ static inline void mei_tx_cb_dequeue(struct mei_cl_cb *cb) /** * mei_cl_set_read_by_fp - set pending_read flag to vtag struct for given fp * - * Locking: called under "dev->device_lock" lock - * * @cl: mei client * @fp: pointer to file structure + * + * Locking: called under "dev->device_lock" lock */ static void mei_cl_set_read_by_fp(const struct mei_cl *cl, const struct file *fp) diff --git a/drivers/misc/mei/dma-ring.c b/drivers/misc/mei/dma-ring.c index ef56f849b251..651e77ef82bd 100644 --- a/drivers/misc/mei/dma-ring.c +++ b/drivers/misc/mei/dma-ring.c @@ -124,6 +124,8 @@ void mei_dma_ring_reset(struct mei_device *dev) * @buf: data buffer * @offset: offset in slots. * @n: number of slots to copy. + * + * Return: number of bytes copied */ static size_t mei_dma_copy_from(struct mei_device *dev, unsigned char *buf, u32 offset, u32 n) @@ -144,6 +146,8 @@ static size_t mei_dma_copy_from(struct mei_device *dev, unsigned char *buf, * @buf: data buffer * @offset: offset in slots. * @n: number of slots to copy. + * + * Return: number of bytes copied */ static size_t mei_dma_copy_to(struct mei_device *dev, unsigned char *buf, u32 offset, u32 n) @@ -161,7 +165,7 @@ static size_t mei_dma_copy_to(struct mei_device *dev, unsigned char *buf, /** * mei_dma_ring_read() - read data from the ring * @dev: mei device - * @buf: buffer to read into: may be NULL in case of droping the data. + * @buf: buffer to read into: may be NULL in case of dropping the data. * @len: length to read. */ void mei_dma_ring_read(struct mei_device *dev, unsigned char *buf, u32 len) diff --git a/drivers/misc/mei/hbm.c b/drivers/misc/mei/hbm.c index 12a62a911e42..026b1f686c16 100644 --- a/drivers/misc/mei/hbm.c +++ b/drivers/misc/mei/hbm.c @@ -91,6 +91,8 @@ static int mei_cl_conn_status_to_errno(enum mei_cl_connect_status status) * @dev: mei device * @hdr: mei header * @data: payload + * + * Return: >=0 on success, <0 on error */ static inline int mei_hbm_write_message(struct mei_device *dev, struct mei_msg_hdr *hdr, @@ -111,7 +113,7 @@ void mei_hbm_idle(struct mei_device *dev) } /** - * mei_hbm_reset - reset hbm counters and book keeping data structurs + * mei_hbm_reset - reset hbm counters and book keeping data structures * * @dev: the device structure */ @@ -907,7 +909,7 @@ int mei_hbm_cl_disconnect_req(struct mei_device *dev, struct mei_cl *cl) } /** - * mei_hbm_cl_disconnect_rsp - sends disconnect respose to the FW + * mei_hbm_cl_disconnect_rsp - sends disconnect response to the FW * * @dev: the device structure * @cl: a client to disconnect from diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h index bdc65d50b945..961e5d53a27a 100644 --- a/drivers/misc/mei/hw-me-regs.h +++ b/drivers/misc/mei/hw-me-regs.h @@ -123,6 +123,9 @@ # define PCI_CFG_HFS_1_OPMODE_MSK 0xf0000 /* OP MODE Mask: SPS <= 4.0 */ # define PCI_CFG_HFS_1_OPMODE_SPS 0xf0000 /* SPS SKU : SPS <= 4.0 */ #define PCI_CFG_HFS_2 0x48 +# define PCI_CFG_HFS_2_PM_CMOFF_TO_CMX_ERROR 0x1000000 /* CMoff->CMx wake after an error */ +# define PCI_CFG_HFS_2_PM_CM_RESET_ERROR 0x5000000 /* CME reset due to exception */ +# define PCI_CFG_HFS_2_PM_EVENT_MASK 0xf000000 #define PCI_CFG_HFS_3 0x60 # define PCI_CFG_HFS_3_FW_SKU_MSK 0x00000070 # define PCI_CFG_HFS_3_FW_SKU_IGN 0x00000000 diff --git a/drivers/misc/mei/hw-me.c b/drivers/misc/mei/hw-me.c index da4ef0b51954..d11a0740b47c 100644 --- a/drivers/misc/mei/hw-me.c +++ b/drivers/misc/mei/hw-me.c @@ -443,11 +443,22 @@ static void mei_gsc_pxp_check(struct mei_device *dev) struct mei_me_hw *hw = to_me_hw(dev); u32 fwsts5 = 0; - if (dev->pxp_mode == MEI_DEV_PXP_DEFAULT) + if (!kind_is_gsc(dev) && !kind_is_gscfi(dev)) return; hw->read_fws(dev, PCI_CFG_HFS_5, &fwsts5); trace_mei_pci_cfg_read(dev->dev, "PCI_CFG_HFS_5", PCI_CFG_HFS_5, fwsts5); + + if ((fwsts5 & GSC_CFG_HFS_5_BOOT_TYPE_MSK) == GSC_CFG_HFS_5_BOOT_TYPE_PXP) { + if (dev->gsc_reset_to_pxp == MEI_DEV_RESET_TO_PXP_DEFAULT) + dev->gsc_reset_to_pxp = MEI_DEV_RESET_TO_PXP_PERFORMED; + } else { + dev->gsc_reset_to_pxp = MEI_DEV_RESET_TO_PXP_DEFAULT; + } + + if (dev->pxp_mode == MEI_DEV_PXP_DEFAULT) + return; + if ((fwsts5 & GSC_CFG_HFS_5_BOOT_TYPE_MSK) == GSC_CFG_HFS_5_BOOT_TYPE_PXP) { dev_dbg(dev->dev, "pxp mode is ready 0x%08x\n", fwsts5); dev->pxp_mode = MEI_DEV_PXP_READY; @@ -483,6 +494,43 @@ static int mei_me_hw_ready_wait(struct mei_device *dev) } /** + * mei_me_check_fw_reset - check for the firmware reset error and exception conditions + * + * @dev: mei device + */ +static void mei_me_check_fw_reset(struct mei_device *dev) +{ + struct mei_fw_status fw_status; + char fw_sts_str[MEI_FW_STATUS_STR_SZ] = {0}; + int ret; + u32 fw_pm_event = 0; + + if (!dev->saved_fw_status_flag) + goto end; + + if (dev->gsc_reset_to_pxp == MEI_DEV_RESET_TO_PXP_PERFORMED) { + ret = mei_fw_status(dev, &fw_status); + if (!ret) { + fw_pm_event = fw_status.status[1] & PCI_CFG_HFS_2_PM_EVENT_MASK; + if (fw_pm_event != PCI_CFG_HFS_2_PM_CMOFF_TO_CMX_ERROR && + fw_pm_event != PCI_CFG_HFS_2_PM_CM_RESET_ERROR) + goto end; + } else { + dev_err(dev->dev, "failed to read firmware status: %d\n", ret); + } + } + + mei_fw_status2str(&dev->saved_fw_status, fw_sts_str, sizeof(fw_sts_str)); + dev_warn(dev->dev, "unexpected reset: fw_pm_event = 0x%x, dev_state = %u fw status = %s\n", + fw_pm_event, dev->saved_dev_state, fw_sts_str); + +end: + if (dev->gsc_reset_to_pxp == MEI_DEV_RESET_TO_PXP_PERFORMED) + dev->gsc_reset_to_pxp = MEI_DEV_RESET_TO_PXP_DONE; + dev->saved_fw_status_flag = false; +} + +/** * mei_me_hw_start - hw start routine * * @dev: mei device @@ -492,6 +540,8 @@ static int mei_me_hw_start(struct mei_device *dev) { int ret = mei_me_hw_ready_wait(dev); + if (kind_is_gsc(dev) || kind_is_gscfi(dev)) + mei_me_check_fw_reset(dev); if (ret) return ret; dev_dbg(dev->dev, "hw is ready\n"); @@ -1300,8 +1350,13 @@ irqreturn_t mei_me_irq_thread_handler(int irq, void *dev_id) /* check if ME wants a reset */ if (!mei_hw_is_ready(dev) && dev->dev_state != MEI_DEV_RESETTING) { - dev_warn(dev->dev, "FW not ready: resetting: dev_state = %d pxp = %d\n", - dev->dev_state, dev->pxp_mode); + if (kind_is_gsc(dev) || kind_is_gscfi(dev)) { + dev_dbg(dev->dev, "FW not ready: resetting: dev_state = %d\n", + dev->dev_state); + } else { + dev_warn(dev->dev, "FW not ready: resetting: dev_state = %d\n", + dev->dev_state); + } if (dev->dev_state == MEI_DEV_POWERING_DOWN || dev->dev_state == MEI_DEV_POWER_DOWN) mei_cl_all_disconnect(dev); @@ -1379,6 +1434,8 @@ EXPORT_SYMBOL_GPL(mei_me_irq_thread_handler); /** * mei_me_polling_thread - interrupt register polling thread * + * @_dev: mei device + * * The thread monitors the interrupt source register and calls * mei_me_irq_thread_handler() to handle the firmware * input. @@ -1388,8 +1445,6 @@ EXPORT_SYMBOL_GPL(mei_me_irq_thread_handler); * time increases yet again by MEI_POLLING_TIMEOUT_ACTIVE * up to MEI_POLLING_TIMEOUT_IDLE. * - * @_dev: mei device - * * Return: always 0 */ int mei_me_polling_thread(void *_dev) @@ -1468,12 +1523,12 @@ static const struct mei_hw_ops mei_me_hw_ops = { /** * mei_me_fw_type_nm() - check for nm sku * + * @pdev: pci device + * * Read ME FW Status register to check for the Node Manager (NM) Firmware. * The NM FW is only signaled in PCI function 0. * __Note__: Deprecated by PCH8 and newer. * - * @pdev: pci device - * * Return: true in case of NM firmware */ static bool mei_me_fw_type_nm(const struct pci_dev *pdev) @@ -1494,12 +1549,12 @@ static bool mei_me_fw_type_nm(const struct pci_dev *pdev) /** * mei_me_fw_type_sps_4() - check for sps 4.0 sku * + * @pdev: pci device + * * Read ME FW Status register to check for SPS Firmware. * The SPS FW is only signaled in the PCI function 0. * __Note__: Deprecated by SPS 5.0 and newer. * - * @pdev: pci device - * * Return: true in case of SPS firmware */ static bool mei_me_fw_type_sps_4(const struct pci_dev *pdev) @@ -1519,11 +1574,11 @@ static bool mei_me_fw_type_sps_4(const struct pci_dev *pdev) /** * mei_me_fw_type_sps_ign() - check for sps or ign sku * + * @pdev: pci device + * * Read ME FW Status register to check for SPS or IGN Firmware. * The SPS/IGN FW is only signaled in pci function 0 * - * @pdev: pci device - * * Return: true in case of SPS/IGN firmware */ static bool mei_me_fw_type_sps_ign(const struct pci_dev *pdev) diff --git a/drivers/misc/mei/hw-me.h b/drivers/misc/mei/hw-me.h index 95cf830b7c7b..204b92af6c47 100644 --- a/drivers/misc/mei/hw-me.h +++ b/drivers/misc/mei/hw-me.h @@ -102,10 +102,14 @@ static inline bool mei_me_hw_use_polling(const struct mei_me_hw *hw) * @MEI_ME_PCH12_SPS_CFG: Platform Controller Hub Gen12 5.0 and newer * servers platforms with quirk for * SPS firmware exclusion. + * @MEI_ME_PCH12_SPS_ITOUCH_CFG: Platform Controller Hub Gen12 + * client platforms (iTouch) * @MEI_ME_PCH15_CFG: Platform Controller Hub Gen15 and newer * @MEI_ME_PCH15_SPS_CFG: Platform Controller Hub Gen15 and newer * servers platforms with quirk for * SPS firmware exclusion. + * @MEI_ME_GSC_CFG: Graphics System Controller + * @MEI_ME_GSCFI_CFG: Graphics System Controller Firmware Interface * @MEI_ME_NUM_CFG: Upper Sentinel. */ enum mei_cfg_idx { diff --git a/drivers/misc/mei/hw.h b/drivers/misc/mei/hw.h index e910302fcd1f..eb800a07a84b 100644 --- a/drivers/misc/mei/hw.h +++ b/drivers/misc/mei/hw.h @@ -429,7 +429,7 @@ struct mei_bus_message { } __packed; /** - * struct hbm_cl_cmd - client specific host bus command + * struct mei_hbm_cl_cmd - client specific host bus command * CONNECT, DISCONNECT, and FlOW CONTROL * * @hbm_cmd: bus message command header @@ -733,7 +733,7 @@ struct hbm_dma_setup_response { } __packed; /** - * struct mei_dma_ring_ctrl - dma ring control block + * struct hbm_dma_ring_ctrl - dma ring control block * * @hbuf_wr_idx: host circular buffer write index in slots * @reserved1: reserved for alignment @@ -806,8 +806,8 @@ struct hbm_client_dma_map_request { } __packed; /** - * struct hbm_client_dma_unmap_request - * client dma unmap request from the host to the firmware + * struct hbm_client_dma_unmap_request - client dma unmap request + * from the host to the firmware * * @hbm_cmd: bus message command header * @status: unmap status @@ -822,8 +822,8 @@ struct hbm_client_dma_unmap_request { } __packed; /** - * struct hbm_client_dma_response - * client dma unmap response from the firmware to the host + * struct hbm_client_dma_response - client dma unmap response + * from the firmware to the host * * @hbm_cmd: bus message command header * @status: command status diff --git a/drivers/misc/mei/init.c b/drivers/misc/mei/init.c index c35e005b26be..8ef2b1df8ac7 100644 --- a/drivers/misc/mei/init.c +++ b/drivers/misc/mei/init.c @@ -89,6 +89,22 @@ void mei_cancel_work(struct mei_device *dev) } EXPORT_SYMBOL_GPL(mei_cancel_work); +static void mei_save_fw_status(struct mei_device *dev) +{ + struct mei_fw_status fw_status; + int ret; + + ret = mei_fw_status(dev, &fw_status); + if (ret) { + dev_err(dev->dev, "failed to read firmware status: %d\n", ret); + return; + } + + dev->saved_dev_state = dev->dev_state; + dev->saved_fw_status_flag = true; + memcpy(&dev->saved_fw_status, &fw_status, sizeof(fw_status)); +} + /** * mei_reset - resets host and fw. * @@ -109,8 +125,14 @@ int mei_reset(struct mei_device *dev) char fw_sts_str[MEI_FW_STATUS_STR_SZ]; mei_fw_status_str(dev, fw_sts_str, MEI_FW_STATUS_STR_SZ); - dev_warn(dev->dev, "unexpected reset: dev_state = %s fw status = %s\n", - mei_dev_state_str(state), fw_sts_str); + if (kind_is_gsc(dev) || kind_is_gscfi(dev)) { + dev_dbg(dev->dev, "unexpected reset: dev_state = %s fw status = %s\n", + mei_dev_state_str(state), fw_sts_str); + mei_save_fw_status(dev); + } else { + dev_warn(dev->dev, "unexpected reset: dev_state = %s fw status = %s\n", + mei_dev_state_str(state), fw_sts_str); + } } mei_clear_interrupts(dev); @@ -394,6 +416,7 @@ void mei_device_init(struct mei_device *dev, dev->open_handle_count = 0; dev->pxp_mode = MEI_DEV_PXP_DEFAULT; + dev->gsc_reset_to_pxp = MEI_DEV_RESET_TO_PXP_DEFAULT; /* * Reserving the first client ID diff --git a/drivers/misc/mei/interrupt.c b/drivers/misc/mei/interrupt.c index 0a0e984e5673..b09b79fedaba 100644 --- a/drivers/misc/mei/interrupt.c +++ b/drivers/misc/mei/interrupt.c @@ -72,7 +72,7 @@ static void mei_irq_discard_msg(struct mei_device *dev, struct mei_msg_hdr *hdr, discard_len = 0; } /* - * no need to check for size as it is guarantied + * no need to check for size as it is guaranteed * that length fits into rd_msg_buf */ mei_read_slots(dev, dev->rd_msg_buf, discard_len); @@ -626,9 +626,9 @@ static void mei_connect_timeout(struct mei_cl *cl) /** * mei_schedule_stall_timer - re-arm stall_timer work * - * Schedule stall timer - * * @dev: the device structure + * + * Schedule stall timer */ void mei_schedule_stall_timer(struct mei_device *dev) { diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c index bb4e9eabda97..79e6f3c1341f 100644 --- a/drivers/misc/mei/main.c +++ b/drivers/misc/mei/main.c @@ -460,11 +460,11 @@ end: /** * mei_vt_support_check - check if client support vtags * - * Locking: called under "dev->device_lock" lock - * * @dev: mei_device * @uuid: client UUID * + * Locking: called under "dev->device_lock" lock + * * Return: * 0 - supported * -ENOTTY - no such client @@ -587,8 +587,8 @@ static int mei_ioctl_connect_vtag(struct file *file, } /** - * mei_ioctl_client_notify_request - - * propagate event notification request to client + * mei_ioctl_client_notify_request - propagate event notification + * request to client * * @file: pointer to file structure * @request: 0 - disable, 1 - enable diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h index cdf8a2edf0b3..37d7fb15cad7 100644 --- a/drivers/misc/mei/mei_dev.h +++ b/drivers/misc/mei/mei_dev.h @@ -70,9 +70,9 @@ enum mei_dev_state { /** * enum mei_dev_pxp_mode - MEI PXP mode state * - * @MEI_DEV_PXP_DEFAULT: PCH based device, no initailization required + * @MEI_DEV_PXP_DEFAULT: PCH based device, no initialization required * @MEI_DEV_PXP_INIT: device requires initialization, send setup message to firmware - * @MEI_DEV_PXP_SETUP: device is in setup stage, waiting for firmware repsonse + * @MEI_DEV_PXP_SETUP: device is in setup stage, waiting for firmware response * @MEI_DEV_PXP_READY: device initialized */ enum mei_dev_pxp_mode { @@ -82,6 +82,19 @@ enum mei_dev_pxp_mode { MEI_DEV_PXP_READY = 3, }; +/** + * enum mei_dev_reset_to_pxp - reset to PXP mode performed + * + * @MEI_DEV_RESET_TO_PXP_DEFAULT: before reset + * @MEI_DEV_RESET_TO_PXP_PERFORMED: reset performed + * @MEI_DEV_RESET_TO_PXP_DONE: reset processed + */ +enum mei_dev_reset_to_pxp { + MEI_DEV_RESET_TO_PXP_DEFAULT = 0, + MEI_DEV_RESET_TO_PXP_PERFORMED = 1, + MEI_DEV_RESET_TO_PXP_DONE = 2, +}; + const char *mei_dev_state_str(int state); enum mei_file_transaction_states { @@ -534,6 +547,11 @@ struct mei_dev_timeouts { * * @dbgfs_dir : debugfs mei root directory * + * @saved_fw_status : saved firmware status + * @saved_dev_state : saved device state + * @saved_fw_status_flag : flag indicating that firmware status was saved + * @gsc_reset_to_pxp : state of reset to the PXP mode + * * @ops: : hw specific operations * @hw : hw specific data */ @@ -630,6 +648,11 @@ struct mei_device { struct dentry *dbgfs_dir; #endif /* CONFIG_DEBUG_FS */ + struct mei_fw_status saved_fw_status; + enum mei_dev_state saved_dev_state; + bool saved_fw_status_flag; + enum mei_dev_reset_to_pxp gsc_reset_to_pxp; + const struct mei_hw_ops *ops; char hw[] __aligned(sizeof(void *)); }; @@ -874,5 +897,29 @@ static inline ssize_t mei_fw_status_str(struct mei_device *dev, return ret; } +/** + * kind_is_gsc - checks whether the device is gsc + * + * @dev: the device structure + * + * Return: whether the device is gsc + */ +static inline bool kind_is_gsc(struct mei_device *dev) +{ + /* check kind for NULL because it may be not set, like at the fist call to hw_start */ + return dev->kind && (strcmp(dev->kind, "gsc") == 0); +} +/** + * kind_is_gscfi - checks whether the device is gscfi + * + * @dev: the device structure + * + * Return: whether the device is gscfi + */ +static inline bool kind_is_gscfi(struct mei_device *dev) +{ + /* check kind for NULL because it may be not set, like at the fist call to hw_start */ + return dev->kind && (strcmp(dev->kind, "gscfi") == 0); +} #endif diff --git a/drivers/misc/mei/pxp/mei_pxp.c b/drivers/misc/mei/pxp/mei_pxp.c index 2dcb9169e404..f77d78fa5054 100644 --- a/drivers/misc/mei/pxp/mei_pxp.c +++ b/drivers/misc/mei/pxp/mei_pxp.c @@ -11,6 +11,7 @@ * negotiation messages to ME FW command payloads and vice versa. */ +#include <linux/delay.h> #include <linux/module.h> #include <linux/slab.h> #include <linux/mei.h> @@ -22,31 +23,70 @@ #include "mei_pxp.h" +static inline int mei_pxp_reenable(const struct device *dev, struct mei_cl_device *cldev) +{ + int ret; + + dev_warn(dev, "Trying to reset the channel...\n"); + ret = mei_cldev_disable(cldev); + if (ret < 0) + dev_warn(dev, "mei_cldev_disable failed. %d\n", ret); + /* + * Explicitly ignoring disable failure, + * enable may fix the states and succeed + */ + ret = mei_cldev_enable(cldev); + if (ret < 0) + dev_err(dev, "mei_cldev_enable failed. %d\n", ret); + return ret; +} + /** * mei_pxp_send_message() - Sends a PXP message to ME FW. * @dev: device corresponding to the mei_cl_device * @message: a message buffer to send * @size: size of the message - * Return: 0 on Success, <0 on Failure + * @timeout_ms: timeout in milliseconds, zero means wait indefinitely. + * + * Returns: 0 on Success, <0 on Failure with the following defined failures. + * -ENODEV: Client was not connected. + * Caller may attempt to try again immediately. + * -ENOMEM: Internal memory allocation failure experienced. + * Caller may sleep to allow kernel reclaim before retrying. + * -EINTR : Calling thread received a signal. Caller may choose + * to abandon with the same thread id. + * -ETIME : Request is timed out. + * Caller may attempt to try again immediately. */ static int -mei_pxp_send_message(struct device *dev, const void *message, size_t size) +mei_pxp_send_message(struct device *dev, const void *message, size_t size, unsigned long timeout_ms) { struct mei_cl_device *cldev; ssize_t byte; + int ret; if (!dev || !message) return -EINVAL; cldev = to_mei_cl_device(dev); - byte = mei_cldev_send(cldev, message, size); + byte = mei_cldev_send_timeout(cldev, message, size, timeout_ms); if (byte < 0) { dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); - return byte; + switch (byte) { + case -ENOMEM: + fallthrough; + case -ENODEV: + fallthrough; + case -ETIME: + ret = mei_pxp_reenable(dev, cldev); + if (ret) + byte = ret; + break; + } } - return 0; + return byte; } /** @@ -54,23 +94,53 @@ mei_pxp_send_message(struct device *dev, const void *message, size_t size) * @dev: device corresponding to the mei_cl_device * @buffer: a message buffer to contain the received message * @size: size of the buffer - * Return: bytes sent on Success, <0 on Failure + * @timeout_ms: timeout in milliseconds, zero means wait indefinitely. + * + * Returns: number of bytes send on Success, <0 on Failure with the following defined failures. + * -ENODEV: Client was not connected. + * Caller may attempt to try again from send immediately. + * -ENOMEM: Internal memory allocation failure experienced. + * Caller may sleep to allow kernel reclaim before retrying. + * -EINTR : Calling thread received a signal. Caller will need to repeat calling + * (with a different owning thread) to retrieve existing unclaimed response + * (and may discard it). + * -ETIME : Request is timed out. + * Caller may attempt to try again from send immediately. */ static int -mei_pxp_receive_message(struct device *dev, void *buffer, size_t size) +mei_pxp_receive_message(struct device *dev, void *buffer, size_t size, unsigned long timeout_ms) { struct mei_cl_device *cldev; ssize_t byte; + bool retry = false; + int ret; if (!dev || !buffer) return -EINVAL; cldev = to_mei_cl_device(dev); - byte = mei_cldev_recv(cldev, buffer, size); +retry: + byte = mei_cldev_recv_timeout(cldev, buffer, size, timeout_ms); if (byte < 0) { dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); - return byte; + switch (byte) { + case -ENOMEM: + /* Retry the read when pages are reclaimed */ + msleep(20); + if (!retry) { + retry = true; + goto retry; + } + fallthrough; + case -ENODEV: + fallthrough; + case -ETIME: + ret = mei_pxp_reenable(dev, cldev); + if (ret) + byte = ret; + break; + } } return byte; diff --git a/drivers/misc/ocxl/file.c b/drivers/misc/ocxl/file.c index 6e63f060e4cc..ac69b7f361f5 100644 --- a/drivers/misc/ocxl/file.c +++ b/drivers/misc/ocxl/file.c @@ -14,7 +14,6 @@ #define OCXL_NUM_MINORS 256 /* Total to reserve */ static dev_t ocxl_dev; -static struct class *ocxl_class; static DEFINE_MUTEX(minors_idr_lock); static struct idr minors_idr; @@ -509,6 +508,16 @@ static void ocxl_file_make_invisible(struct ocxl_file_info *info) cdev_del(&info->cdev); } +static char *ocxl_devnode(const struct device *dev, umode_t *mode) +{ + return kasprintf(GFP_KERNEL, "ocxl/%s", dev_name(dev)); +} + +static const struct class ocxl_class = { + .name = "ocxl", + .devnode = ocxl_devnode, +}; + int ocxl_file_register_afu(struct ocxl_afu *afu) { int minor; @@ -529,7 +538,7 @@ int ocxl_file_register_afu(struct ocxl_afu *afu) info->dev.parent = &fn->dev; info->dev.devt = MKDEV(MAJOR(ocxl_dev), minor); - info->dev.class = ocxl_class; + info->dev.class = &ocxl_class; info->dev.release = info_release; info->afu = afu; @@ -584,11 +593,6 @@ void ocxl_file_unregister_afu(struct ocxl_afu *afu) device_unregister(&info->dev); } -static char *ocxl_devnode(const struct device *dev, umode_t *mode) -{ - return kasprintf(GFP_KERNEL, "ocxl/%s", dev_name(dev)); -} - int ocxl_file_init(void) { int rc; @@ -601,20 +605,19 @@ int ocxl_file_init(void) return rc; } - ocxl_class = class_create("ocxl"); - if (IS_ERR(ocxl_class)) { + rc = class_register(&ocxl_class); + if (rc) { pr_err("Unable to create ocxl class\n"); unregister_chrdev_region(ocxl_dev, OCXL_NUM_MINORS); - return PTR_ERR(ocxl_class); + return rc; } - ocxl_class->devnode = ocxl_devnode; return 0; } void ocxl_file_exit(void) { - class_destroy(ocxl_class); + class_unregister(&ocxl_class); unregister_chrdev_region(ocxl_dev, OCXL_NUM_MINORS); idr_destroy(&minors_idr); } diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c index 150083dab71a..af519088732d 100644 --- a/drivers/misc/pci_endpoint_test.c +++ b/drivers/misc/pci_endpoint_test.c @@ -71,6 +71,7 @@ #define PCI_DEVICE_ID_TI_AM654 0xb00c #define PCI_DEVICE_ID_TI_J7200 0xb00f #define PCI_DEVICE_ID_TI_AM64 0xb010 +#define PCI_DEVICE_ID_TI_J721S2 0xb013 #define PCI_DEVICE_ID_LS1088A 0x80c0 #define PCI_DEVICE_ID_IMX8 0x0808 @@ -1003,6 +1004,9 @@ static const struct pci_device_id pci_endpoint_test_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_AM64), .driver_data = (kernel_ulong_t)&j721e_data, }, + { PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_J721S2), + .driver_data = (kernel_ulong_t)&j721e_data, + }, { } }; MODULE_DEVICE_TABLE(pci, pci_endpoint_test_tbl); diff --git a/drivers/misc/phantom.c b/drivers/misc/phantom.c index 7966a6b8b5b3..30bd7c39c261 100644 --- a/drivers/misc/phantom.c +++ b/drivers/misc/phantom.c @@ -35,9 +35,12 @@ #define PHB_NOT_OH 2 static DEFINE_MUTEX(phantom_mutex); -static struct class *phantom_class; static int phantom_major; +static const struct class phantom_class = { + .name = "phantom", +}; + struct phantom_device { unsigned int opened; void __iomem *caddr; @@ -403,7 +406,7 @@ static int phantom_probe(struct pci_dev *pdev, goto err_irq; } - if (IS_ERR(device_create(phantom_class, &pdev->dev, + if (IS_ERR(device_create(&phantom_class, &pdev->dev, MKDEV(phantom_major, minor), NULL, "phantom%u", minor))) dev_err(&pdev->dev, "can't create device\n"); @@ -436,7 +439,7 @@ static void phantom_remove(struct pci_dev *pdev) struct phantom_device *pht = pci_get_drvdata(pdev); unsigned int minor = MINOR(pht->cdev.dev); - device_destroy(phantom_class, MKDEV(phantom_major, minor)); + device_destroy(&phantom_class, MKDEV(phantom_major, minor)); cdev_del(&pht->cdev); @@ -503,13 +506,12 @@ static int __init phantom_init(void) int retval; dev_t dev; - phantom_class = class_create("phantom"); - if (IS_ERR(phantom_class)) { - retval = PTR_ERR(phantom_class); + retval = class_register(&phantom_class); + if (retval) { printk(KERN_ERR "phantom: can't register phantom class\n"); goto err; } - retval = class_create_file(phantom_class, &class_attr_version.attr); + retval = class_create_file(&phantom_class, &class_attr_version.attr); if (retval) { printk(KERN_ERR "phantom: can't create sysfs version file\n"); goto err_class; @@ -535,9 +537,9 @@ static int __init phantom_init(void) err_unchr: unregister_chrdev_region(dev, PHANTOM_MAX_MINORS); err_attr: - class_remove_file(phantom_class, &class_attr_version.attr); + class_remove_file(&phantom_class, &class_attr_version.attr); err_class: - class_destroy(phantom_class); + class_unregister(&phantom_class); err: return retval; } @@ -548,8 +550,8 @@ static void __exit phantom_exit(void) unregister_chrdev_region(MKDEV(phantom_major, 0), PHANTOM_MAX_MINORS); - class_remove_file(phantom_class, &class_attr_version.attr); - class_destroy(phantom_class); + class_remove_file(&phantom_class, &class_attr_version.attr); + class_unregister(&phantom_class); pr_debug("phantom: module successfully removed\n"); } diff --git a/drivers/misc/pvpanic/pvpanic-mmio.c b/drivers/misc/pvpanic/pvpanic-mmio.c index eb97167c03fb..9715798acce3 100644 --- a/drivers/misc/pvpanic/pvpanic-mmio.c +++ b/drivers/misc/pvpanic/pvpanic-mmio.c @@ -24,52 +24,9 @@ MODULE_AUTHOR("Hu Tao <hutao@cn.fujitsu.com>"); MODULE_DESCRIPTION("pvpanic-mmio device driver"); MODULE_LICENSE("GPL"); -static ssize_t capability_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct pvpanic_instance *pi = dev_get_drvdata(dev); - - return sysfs_emit(buf, "%x\n", pi->capability); -} -static DEVICE_ATTR_RO(capability); - -static ssize_t events_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct pvpanic_instance *pi = dev_get_drvdata(dev); - - return sysfs_emit(buf, "%x\n", pi->events); -} - -static ssize_t events_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct pvpanic_instance *pi = dev_get_drvdata(dev); - unsigned int tmp; - int err; - - err = kstrtouint(buf, 16, &tmp); - if (err) - return err; - - if ((tmp & pi->capability) != tmp) - return -EINVAL; - - pi->events = tmp; - - return count; -} -static DEVICE_ATTR_RW(events); - -static struct attribute *pvpanic_mmio_dev_attrs[] = { - &dev_attr_capability.attr, - &dev_attr_events.attr, - NULL -}; -ATTRIBUTE_GROUPS(pvpanic_mmio_dev); - static int pvpanic_mmio_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct pvpanic_instance *pi; struct resource *res; void __iomem *base; @@ -92,18 +49,7 @@ static int pvpanic_mmio_probe(struct platform_device *pdev) return -EINVAL; } - pi = devm_kmalloc(dev, sizeof(*pi), GFP_KERNEL); - if (!pi) - return -ENOMEM; - - pi->base = base; - pi->capability = PVPANIC_PANICKED | PVPANIC_CRASH_LOADED; - - /* initialize capability by RDPT */ - pi->capability &= ioread8(base); - pi->events = pi->capability; - - return devm_pvpanic_probe(dev, pi); + return devm_pvpanic_probe(dev, base); } static const struct of_device_id pvpanic_mmio_match[] = { @@ -123,7 +69,7 @@ static struct platform_driver pvpanic_mmio_driver = { .name = "pvpanic-mmio", .of_match_table = pvpanic_mmio_match, .acpi_match_table = pvpanic_device_ids, - .dev_groups = pvpanic_mmio_dev_groups, + .dev_groups = pvpanic_dev_groups, }, .probe = pvpanic_mmio_probe, }; diff --git a/drivers/misc/pvpanic/pvpanic-pci.c b/drivers/misc/pvpanic/pvpanic-pci.c index 07eddb5ea30f..689af4c28c2a 100644 --- a/drivers/misc/pvpanic/pvpanic-pci.c +++ b/drivers/misc/pvpanic/pvpanic-pci.c @@ -22,51 +22,8 @@ MODULE_AUTHOR("Mihai Carabas <mihai.carabas@oracle.com>"); MODULE_DESCRIPTION("pvpanic device driver"); MODULE_LICENSE("GPL"); -static ssize_t capability_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct pvpanic_instance *pi = dev_get_drvdata(dev); - - return sysfs_emit(buf, "%x\n", pi->capability); -} -static DEVICE_ATTR_RO(capability); - -static ssize_t events_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct pvpanic_instance *pi = dev_get_drvdata(dev); - - return sysfs_emit(buf, "%x\n", pi->events); -} - -static ssize_t events_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct pvpanic_instance *pi = dev_get_drvdata(dev); - unsigned int tmp; - int err; - - err = kstrtouint(buf, 16, &tmp); - if (err) - return err; - - if ((tmp & pi->capability) != tmp) - return -EINVAL; - - pi->events = tmp; - - return count; -} -static DEVICE_ATTR_RW(events); - -static struct attribute *pvpanic_pci_dev_attrs[] = { - &dev_attr_capability.attr, - &dev_attr_events.attr, - NULL -}; -ATTRIBUTE_GROUPS(pvpanic_pci_dev); - static int pvpanic_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { - struct pvpanic_instance *pi; void __iomem *base; int ret; @@ -78,18 +35,7 @@ static int pvpanic_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e if (!base) return -ENOMEM; - pi = devm_kmalloc(&pdev->dev, sizeof(*pi), GFP_KERNEL); - if (!pi) - return -ENOMEM; - - pi->base = base; - pi->capability = PVPANIC_PANICKED | PVPANIC_CRASH_LOADED; - - /* initlize capability by RDPT */ - pi->capability &= ioread8(base); - pi->events = pi->capability; - - return devm_pvpanic_probe(&pdev->dev, pi); + return devm_pvpanic_probe(&pdev->dev, base); } static const struct pci_device_id pvpanic_pci_id_tbl[] = { @@ -103,7 +49,7 @@ static struct pci_driver pvpanic_pci_driver = { .id_table = pvpanic_pci_id_tbl, .probe = pvpanic_pci_probe, .driver = { - .dev_groups = pvpanic_pci_dev_groups, + .dev_groups = pvpanic_dev_groups, }, }; module_pci_driver(pvpanic_pci_driver); diff --git a/drivers/misc/pvpanic/pvpanic.c b/drivers/misc/pvpanic/pvpanic.c index 049a12006348..305b367e0ce3 100644 --- a/drivers/misc/pvpanic/pvpanic.c +++ b/drivers/misc/pvpanic/pvpanic.c @@ -7,6 +7,7 @@ * Copyright (C) 2021 Oracle. */ +#include <linux/device.h> #include <linux/io.h> #include <linux/kernel.h> #include <linux/kexec.h> @@ -26,6 +27,13 @@ MODULE_AUTHOR("Mihai Carabas <mihai.carabas@oracle.com>"); MODULE_DESCRIPTION("pvpanic device driver"); MODULE_LICENSE("GPL"); +struct pvpanic_instance { + void __iomem *base; + unsigned int capability; + unsigned int events; + struct list_head list; +}; + static struct list_head pvpanic_list; static spinlock_t pvpanic_lock; @@ -81,11 +89,75 @@ static void pvpanic_remove(void *param) spin_unlock(&pvpanic_lock); } -int devm_pvpanic_probe(struct device *dev, struct pvpanic_instance *pi) +static ssize_t capability_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct pvpanic_instance *pi = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%x\n", pi->capability); +} +static DEVICE_ATTR_RO(capability); + +static ssize_t events_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct pvpanic_instance *pi = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%x\n", pi->events); +} + +static ssize_t events_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct pvpanic_instance *pi = dev_get_drvdata(dev); + unsigned int tmp; + int err; + + err = kstrtouint(buf, 16, &tmp); + if (err) + return err; + + if ((tmp & pi->capability) != tmp) + return -EINVAL; + + pi->events = tmp; + + return count; +} +static DEVICE_ATTR_RW(events); + +static struct attribute *pvpanic_dev_attrs[] = { + &dev_attr_capability.attr, + &dev_attr_events.attr, + NULL +}; + +static const struct attribute_group pvpanic_dev_group = { + .attrs = pvpanic_dev_attrs, +}; + +const struct attribute_group *pvpanic_dev_groups[] = { + &pvpanic_dev_group, + NULL +}; +EXPORT_SYMBOL_GPL(pvpanic_dev_groups); + +int devm_pvpanic_probe(struct device *dev, void __iomem *base) { - if (!pi || !pi->base) + struct pvpanic_instance *pi; + + if (!base) return -EINVAL; + pi = devm_kmalloc(dev, sizeof(*pi), GFP_KERNEL); + if (!pi) + return -ENOMEM; + + pi->base = base; + pi->capability = PVPANIC_PANICKED | PVPANIC_CRASH_LOADED; + + /* initlize capability by RDPT */ + pi->capability &= ioread8(base); + pi->events = pi->capability; + spin_lock(&pvpanic_lock); list_add(&pi->list, &pvpanic_list); spin_unlock(&pvpanic_lock); diff --git a/drivers/misc/pvpanic/pvpanic.h b/drivers/misc/pvpanic/pvpanic.h index 493545951754..46ffb10438ad 100644 --- a/drivers/misc/pvpanic/pvpanic.h +++ b/drivers/misc/pvpanic/pvpanic.h @@ -8,13 +8,7 @@ #ifndef PVPANIC_H_ #define PVPANIC_H_ -struct pvpanic_instance { - void __iomem *base; - unsigned int capability; - unsigned int events; - struct list_head list; -}; - -int devm_pvpanic_probe(struct device *dev, struct pvpanic_instance *pi); +int devm_pvpanic_probe(struct device *dev, void __iomem *base); +extern const struct attribute_group *pvpanic_dev_groups[]; #endif /* PVPANIC_H_ */ diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c index c1a134bd8ba7..b878431553ab 100644 --- a/drivers/misc/ti-st/st_core.c +++ b/drivers/misc/ti-st/st_core.c @@ -15,6 +15,7 @@ #include <linux/skbuff.h> #include <linux/ti_wilink_st.h> +#include <linux/netdevice.h> /* * function pointer pointing to either, @@ -429,7 +430,7 @@ static void st_int_enqueue(struct st_data_s *st_gdata, struct sk_buff *skb) case ST_LL_AWAKE_TO_ASLEEP: pr_err("ST LL is illegal state(%ld)," "purging received skb.", st_ll_getstate(st_gdata)); - kfree_skb(skb); + dev_kfree_skb_irq(skb); break; case ST_LL_ASLEEP: skb_queue_tail(&st_gdata->tx_waitq, skb); @@ -438,7 +439,7 @@ static void st_int_enqueue(struct st_data_s *st_gdata, struct sk_buff *skb) default: pr_err("ST LL is illegal state(%ld)," "purging received skb.", st_ll_getstate(st_gdata)); - kfree_skb(skb); + dev_kfree_skb_irq(skb); break; } @@ -492,7 +493,7 @@ void st_tx_wakeup(struct st_data_s *st_data) spin_unlock_irqrestore(&st_data->lock, flags); break; } - kfree_skb(skb); + dev_kfree_skb_irq(skb); spin_unlock_irqrestore(&st_data->lock, flags); } /* if wake-up is set in another context- restart sending */ diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c index fe682e0553b2..4b1be0bb6ac0 100644 --- a/drivers/misc/ti-st/st_kim.c +++ b/drivers/misc/ti-st/st_kim.c @@ -590,7 +590,7 @@ static ssize_t store_dev_name(struct device *dev, { struct kim_data_s *kim_data = dev_get_drvdata(dev); pr_debug("storing dev name >%s<", buf); - strncpy(kim_data->dev_name, buf, count); + strscpy(kim_data->dev_name, buf, sizeof(kim_data->dev_name)); pr_debug("stored dev name >%s<", kim_data->dev_name); return count; } @@ -751,7 +751,8 @@ static int kim_probe(struct platform_device *pdev) } /* copying platform data */ - strncpy(kim_gdata->dev_name, pdata->dev_name, UART_DEV_NAME_LEN); + strscpy(kim_gdata->dev_name, pdata->dev_name, + sizeof(kim_gdata->dev_name)); kim_gdata->flow_cntrl = pdata->flow_cntrl; kim_gdata->baud_rate = pdata->baud_rate; pr_info("sysfs entries created\n"); diff --git a/drivers/misc/uacce/uacce.c b/drivers/misc/uacce/uacce.c index 930c252753a0..bdc2e6fda782 100644 --- a/drivers/misc/uacce/uacce.c +++ b/drivers/misc/uacce/uacce.c @@ -7,10 +7,13 @@ #include <linux/slab.h> #include <linux/uacce.h> -static struct class *uacce_class; static dev_t uacce_devt; static DEFINE_XARRAY_ALLOC(uacce_xa); +static const struct class uacce_class = { + .name = UACCE_NAME, +}; + /* * If the parent driver or the device disappears, the queue state is invalid and * ops are not usable anymore. @@ -530,7 +533,7 @@ struct uacce_device *uacce_alloc(struct device *parent, mutex_init(&uacce->mutex); device_initialize(&uacce->dev); uacce->dev.devt = MKDEV(MAJOR(uacce_devt), uacce->dev_id); - uacce->dev.class = uacce_class; + uacce->dev.class = &uacce_class; uacce->dev.groups = uacce_dev_groups; uacce->dev.parent = uacce->parent; uacce->dev.release = uacce_release; @@ -623,13 +626,13 @@ static int __init uacce_init(void) { int ret; - uacce_class = class_create(UACCE_NAME); - if (IS_ERR(uacce_class)) - return PTR_ERR(uacce_class); + ret = class_register(&uacce_class); + if (ret) + return ret; ret = alloc_chrdev_region(&uacce_devt, 0, MINORMASK, UACCE_NAME); if (ret) - class_destroy(uacce_class); + class_unregister(&uacce_class); return ret; } @@ -637,7 +640,7 @@ static int __init uacce_init(void) static __exit void uacce_exit(void) { unregister_chrdev_region(uacce_devt, MINORMASK); - class_destroy(uacce_class); + class_unregister(&uacce_class); } subsys_initcall(uacce_init); diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 9bd661be3ae9..74dd1b74008d 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -552,6 +552,7 @@ static int mtd_nvmem_add(struct mtd_info *mtd) config.dev = &mtd->dev; config.name = dev_name(&mtd->dev); config.owner = THIS_MODULE; + config.add_legacy_fixed_of_cells = of_device_is_compatible(node, "nvmem-cells"); config.reg_read = mtd_nvmem_reg_read; config.size = mtd->size; config.word_size = 1; @@ -559,7 +560,6 @@ static int mtd_nvmem_add(struct mtd_info *mtd) config.read_only = true; config.root_only = true; config.ignore_wp = true; - config.no_of_node = !of_device_is_compatible(node, "nvmem-cells"); config.priv = mtd; mtd->nvmem = nvmem_register(&config); @@ -898,6 +898,7 @@ static struct nvmem_device *mtd_otp_nvmem_register(struct mtd_info *mtd, config.name = compatible; config.id = NVMEM_DEVID_AUTO; config.owner = THIS_MODULE; + config.add_legacy_fixed_of_cells = true; config.type = NVMEM_TYPE_OTP; config.root_only = true; config.ignore_wp = true; diff --git a/drivers/nvmem/apple-efuses.c b/drivers/nvmem/apple-efuses.c index 9b7c87102104..d3d49d22338b 100644 --- a/drivers/nvmem/apple-efuses.c +++ b/drivers/nvmem/apple-efuses.c @@ -36,6 +36,7 @@ static int apple_efuses_probe(struct platform_device *pdev) struct resource *res; struct nvmem_config config = { .dev = &pdev->dev, + .add_legacy_fixed_of_cells = true, .read_only = true, .reg_read = apple_efuses_read, .stride = sizeof(u32), diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c index eaf6a3fe8ca6..bf42b7e826db 100644 --- a/drivers/nvmem/core.c +++ b/drivers/nvmem/core.c @@ -935,7 +935,7 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config) nvmem->nkeepout = config->nkeepout; if (config->of_node) nvmem->dev.of_node = config->of_node; - else if (!config->no_of_node) + else nvmem->dev.of_node = config->dev->of_node; switch (config->id) { @@ -997,9 +997,11 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config) if (rval) goto err_remove_cells; - rval = nvmem_add_cells_from_legacy_of(nvmem); - if (rval) - goto err_remove_cells; + if (config->add_legacy_fixed_of_cells) { + rval = nvmem_add_cells_from_legacy_of(nvmem); + if (rval) + goto err_remove_cells; + } rval = nvmem_add_cells_from_fixed_layout(nvmem); if (rval) diff --git a/drivers/nvmem/imx-ocotp-scu.c b/drivers/nvmem/imx-ocotp-scu.c index c38d9c1c3f48..517d83e11af2 100644 --- a/drivers/nvmem/imx-ocotp-scu.c +++ b/drivers/nvmem/imx-ocotp-scu.c @@ -220,6 +220,7 @@ static int imx_scu_ocotp_write(void *context, unsigned int offset, static struct nvmem_config imx_scu_ocotp_nvmem_config = { .name = "imx-scu-ocotp", + .add_legacy_fixed_of_cells = true, .read_only = false, .word_size = 4, .stride = 1, diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c index e8b6f194925d..f1e202efaa49 100644 --- a/drivers/nvmem/imx-ocotp.c +++ b/drivers/nvmem/imx-ocotp.c @@ -615,6 +615,7 @@ static int imx_ocotp_probe(struct platform_device *pdev) return PTR_ERR(priv->clk); priv->params = of_device_get_match_data(&pdev->dev); + imx_ocotp_nvmem_config.add_legacy_fixed_of_cells = true; imx_ocotp_nvmem_config.size = 4 * priv->params->nregs; imx_ocotp_nvmem_config.dev = dev; imx_ocotp_nvmem_config.priv = priv; diff --git a/drivers/nvmem/meson-efuse.c b/drivers/nvmem/meson-efuse.c index d6b533497ce1..b922df99f9bc 100644 --- a/drivers/nvmem/meson-efuse.c +++ b/drivers/nvmem/meson-efuse.c @@ -93,6 +93,7 @@ static int meson_efuse_probe(struct platform_device *pdev) econfig->dev = dev; econfig->name = dev_name(dev); + econfig->add_legacy_fixed_of_cells = true; econfig->stride = 1; econfig->word_size = 1; econfig->reg_read = meson_efuse_read; diff --git a/drivers/nvmem/meson-mx-efuse.c b/drivers/nvmem/meson-mx-efuse.c index d6d7aeda31f9..3ff04d5ca8f8 100644 --- a/drivers/nvmem/meson-mx-efuse.c +++ b/drivers/nvmem/meson-mx-efuse.c @@ -210,6 +210,7 @@ static int meson_mx_efuse_probe(struct platform_device *pdev) efuse->config.owner = THIS_MODULE; efuse->config.dev = &pdev->dev; efuse->config.priv = efuse; + efuse->config.add_legacy_fixed_of_cells = true; efuse->config.stride = drvdata->word_size; efuse->config.word_size = drvdata->word_size; efuse->config.size = SZ_512; diff --git a/drivers/nvmem/microchip-otpc.c b/drivers/nvmem/microchip-otpc.c index 436e0dc4f337..7cf81738a3e0 100644 --- a/drivers/nvmem/microchip-otpc.c +++ b/drivers/nvmem/microchip-otpc.c @@ -261,6 +261,7 @@ static int mchp_otpc_probe(struct platform_device *pdev) return ret; mchp_nvmem_config.dev = otpc->dev; + mchp_nvmem_config.add_legacy_fixed_of_cells = true; mchp_nvmem_config.size = size; mchp_nvmem_config.priv = otpc; nvmem = devm_nvmem_register(&pdev->dev, &mchp_nvmem_config); diff --git a/drivers/nvmem/mtk-efuse.c b/drivers/nvmem/mtk-efuse.c index b36cd0dcc8c7..87c94686cfd2 100644 --- a/drivers/nvmem/mtk-efuse.c +++ b/drivers/nvmem/mtk-efuse.c @@ -83,6 +83,7 @@ static int mtk_efuse_probe(struct platform_device *pdev) return PTR_ERR(priv->base); pdata = device_get_match_data(dev); + econfig.add_legacy_fixed_of_cells = true; econfig.stride = 1; econfig.word_size = 1; econfig.reg_read = mtk_reg_read; diff --git a/drivers/nvmem/mxs-ocotp.c b/drivers/nvmem/mxs-ocotp.c index 588ab56d75b7..7b78f18f9545 100644 --- a/drivers/nvmem/mxs-ocotp.c +++ b/drivers/nvmem/mxs-ocotp.c @@ -13,8 +13,9 @@ #include <linux/io.h> #include <linux/module.h> #include <linux/nvmem-provider.h> -#include <linux/of_device.h> +#include <linux/of.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/slab.h> #include <linux/stmp_device.h> @@ -140,11 +141,10 @@ static int mxs_ocotp_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; const struct mxs_data *data; struct mxs_ocotp *otp; - const struct of_device_id *match; int ret; - match = of_match_device(dev->driver->of_match_table, dev); - if (!match || !match->data) + data = device_get_match_data(dev); + if (!data) return -EINVAL; otp = devm_kzalloc(dev, sizeof(*otp), GFP_KERNEL); @@ -169,8 +169,6 @@ static int mxs_ocotp_probe(struct platform_device *pdev) if (ret) return ret; - data = match->data; - ocotp_config.size = data->size; ocotp_config.priv = otp; ocotp_config.dev = dev; diff --git a/drivers/nvmem/qcom-spmi-sdam.c b/drivers/nvmem/qcom-spmi-sdam.c index 70f2d4f2efbf..9aa8f42faa4c 100644 --- a/drivers/nvmem/qcom-spmi-sdam.c +++ b/drivers/nvmem/qcom-spmi-sdam.c @@ -142,6 +142,7 @@ static int sdam_probe(struct platform_device *pdev) sdam->sdam_config.name = "spmi_sdam"; sdam->sdam_config.id = NVMEM_DEVID_AUTO; sdam->sdam_config.owner = THIS_MODULE; + sdam->sdam_config.add_legacy_fixed_of_cells = true; sdam->sdam_config.stride = 1; sdam->sdam_config.word_size = 1; sdam->sdam_config.reg_read = sdam_read; diff --git a/drivers/nvmem/qfprom.c b/drivers/nvmem/qfprom.c index 14814cba2dd6..116a39e804c7 100644 --- a/drivers/nvmem/qfprom.c +++ b/drivers/nvmem/qfprom.c @@ -357,6 +357,7 @@ static int qfprom_probe(struct platform_device *pdev) { struct nvmem_config econfig = { .name = "qfprom", + .add_legacy_fixed_of_cells = true, .stride = 1, .word_size = 1, .id = NVMEM_DEVID_AUTO, @@ -423,12 +424,12 @@ static int qfprom_probe(struct platform_device *pdev) if (IS_ERR(priv->vcc)) return PTR_ERR(priv->vcc); - priv->secclk = devm_clk_get(dev, "core"); + priv->secclk = devm_clk_get_optional(dev, "core"); if (IS_ERR(priv->secclk)) return dev_err_probe(dev, PTR_ERR(priv->secclk), "Error getting clock\n"); - /* Only enable writing if we have SoC data. */ - if (priv->soc_data) + /* Only enable writing if we have SoC data and a valid clock */ + if (priv->soc_data && priv->secclk) econfig.reg_write = qfprom_reg_write; } diff --git a/drivers/nvmem/rave-sp-eeprom.c b/drivers/nvmem/rave-sp-eeprom.c index df6a1c594b78..9ecf3873cbb7 100644 --- a/drivers/nvmem/rave-sp-eeprom.c +++ b/drivers/nvmem/rave-sp-eeprom.c @@ -328,6 +328,7 @@ static int rave_sp_eeprom_probe(struct platform_device *pdev) of_property_read_string(np, "zii,eeprom-name", &config.name); config.priv = eeprom; config.dev = dev; + config.add_legacy_fixed_of_cells = true; config.size = size; config.reg_read = rave_sp_eeprom_reg_read; config.reg_write = rave_sp_eeprom_reg_write; diff --git a/drivers/nvmem/rockchip-efuse.c b/drivers/nvmem/rockchip-efuse.c index 4004c5bece42..2b40978ddb18 100644 --- a/drivers/nvmem/rockchip-efuse.c +++ b/drivers/nvmem/rockchip-efuse.c @@ -205,6 +205,7 @@ static int rockchip_rk3399_efuse_read(void *context, unsigned int offset, static struct nvmem_config econfig = { .name = "rockchip-efuse", + .add_legacy_fixed_of_cells = true, .stride = 1, .word_size = 1, .read_only = true, diff --git a/drivers/nvmem/sc27xx-efuse.c b/drivers/nvmem/sc27xx-efuse.c index 2210da40dfbd..bff27011f4ff 100644 --- a/drivers/nvmem/sc27xx-efuse.c +++ b/drivers/nvmem/sc27xx-efuse.c @@ -247,6 +247,7 @@ static int sc27xx_efuse_probe(struct platform_device *pdev) econfig.reg_read = sc27xx_efuse_read; econfig.priv = efuse; econfig.dev = &pdev->dev; + econfig.add_legacy_fixed_of_cells = true; nvmem = devm_nvmem_register(&pdev->dev, &econfig); if (IS_ERR(nvmem)) { dev_err(&pdev->dev, "failed to register nvmem config\n"); diff --git a/drivers/nvmem/sec-qfprom.c b/drivers/nvmem/sec-qfprom.c index e48c2dc0c44b..19799b3fe00a 100644 --- a/drivers/nvmem/sec-qfprom.c +++ b/drivers/nvmem/sec-qfprom.c @@ -47,6 +47,7 @@ static int sec_qfprom_probe(struct platform_device *pdev) { struct nvmem_config econfig = { .name = "sec-qfprom", + .add_legacy_fixed_of_cells = true, .stride = 1, .word_size = 1, .id = NVMEM_DEVID_AUTO, diff --git a/drivers/nvmem/sprd-efuse.c b/drivers/nvmem/sprd-efuse.c index 7e6e31db4baa..bb3105f3291f 100644 --- a/drivers/nvmem/sprd-efuse.c +++ b/drivers/nvmem/sprd-efuse.c @@ -408,6 +408,7 @@ static int sprd_efuse_probe(struct platform_device *pdev) econfig.read_only = false; econfig.name = "sprd-efuse"; econfig.size = efuse->data->blk_nums * SPRD_EFUSE_BLOCK_WIDTH; + econfig.add_legacy_fixed_of_cells = true; econfig.reg_read = sprd_efuse_read; econfig.reg_write = sprd_efuse_write; econfig.priv = efuse; diff --git a/drivers/nvmem/stm32-romem.c b/drivers/nvmem/stm32-romem.c index 0f84044bd1ad..8a553b1799a8 100644 --- a/drivers/nvmem/stm32-romem.c +++ b/drivers/nvmem/stm32-romem.c @@ -10,7 +10,9 @@ #include <linux/io.h> #include <linux/module.h> #include <linux/nvmem-provider.h> -#include <linux/of_device.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/property.h> #include <linux/tee_drv.h> #include "stm32-bsec-optee-ta.h" @@ -207,11 +209,11 @@ static int stm32_romem_probe(struct platform_device *pdev) priv->cfg.priv = priv; priv->cfg.owner = THIS_MODULE; priv->cfg.type = NVMEM_TYPE_OTP; + priv->cfg.add_legacy_fixed_of_cells = true; priv->lower = 0; - cfg = (const struct stm32_romem_cfg *) - of_match_device(dev->driver->of_match_table, dev)->data; + cfg = device_get_match_data(dev); if (!cfg) { priv->cfg.read_only = true; priv->cfg.size = resource_size(res); diff --git a/drivers/nvmem/sunplus-ocotp.c b/drivers/nvmem/sunplus-ocotp.c index f3a18aa0a6c7..38f5d9df39cd 100644 --- a/drivers/nvmem/sunplus-ocotp.c +++ b/drivers/nvmem/sunplus-ocotp.c @@ -145,6 +145,7 @@ disable_clk: static struct nvmem_config sp_ocotp_nvmem_config = { .name = "sp-ocotp", + .add_legacy_fixed_of_cells = true, .read_only = true, .word_size = 1, .size = QAC628_OTP_SIZE, diff --git a/drivers/nvmem/sunxi_sid.c b/drivers/nvmem/sunxi_sid.c index 5d364d85347f..ba14a76208ab 100644 --- a/drivers/nvmem/sunxi_sid.c +++ b/drivers/nvmem/sunxi_sid.c @@ -153,6 +153,7 @@ static int sunxi_sid_probe(struct platform_device *pdev) nvmem_cfg->dev = dev; nvmem_cfg->name = "sunxi-sid"; nvmem_cfg->type = NVMEM_TYPE_OTP; + nvmem_cfg->add_legacy_fixed_of_cells = true; nvmem_cfg->read_only = true; nvmem_cfg->size = cfg->size; nvmem_cfg->word_size = 1; diff --git a/drivers/nvmem/uniphier-efuse.c b/drivers/nvmem/uniphier-efuse.c index 0a1dbb80537e..6ad3295d3195 100644 --- a/drivers/nvmem/uniphier-efuse.c +++ b/drivers/nvmem/uniphier-efuse.c @@ -52,6 +52,7 @@ static int uniphier_efuse_probe(struct platform_device *pdev) econfig.size = resource_size(res); econfig.priv = priv; econfig.dev = dev; + econfig.add_legacy_fixed_of_cells = true; nvmem = devm_nvmem_register(dev, &econfig); return PTR_ERR_OR_ZERO(nvmem); diff --git a/drivers/nvmem/zynqmp_nvmem.c b/drivers/nvmem/zynqmp_nvmem.c index f49bb9a26d05..7f15aa89a9d0 100644 --- a/drivers/nvmem/zynqmp_nvmem.c +++ b/drivers/nvmem/zynqmp_nvmem.c @@ -58,6 +58,7 @@ static int zynqmp_nvmem_probe(struct platform_device *pdev) priv->dev = dev; econfig.dev = dev; + econfig.add_legacy_fixed_of_cells = true; econfig.reg_read = zynqmp_nvmem_read; econfig.priv = priv; diff --git a/drivers/parport/procfs.c b/drivers/parport/procfs.c index 532d5cbbd344..bd388560ed59 100644 --- a/drivers/parport/procfs.c +++ b/drivers/parport/procfs.c @@ -32,13 +32,6 @@ #define PARPORT_MAX_TIMESLICE_VALUE ((unsigned long) HZ) #define PARPORT_MIN_SPINTIME_VALUE 1 #define PARPORT_MAX_SPINTIME_VALUE 1000 -/* - * PARPORT_BASE_* is the size of the known parts of the sysctl path - * in dev/partport/%s/devices/%s. "dev/parport/"(12), "/devices/"(9 - * and null char(1). - */ -#define PARPORT_BASE_PATH_SIZE 13 -#define PARPORT_BASE_DEVICES_PATH_SIZE 22 static int do_active_device(struct ctl_table *table, int write, void *result, size_t *lenp, loff_t *ppos) @@ -423,8 +416,7 @@ int parport_proc_register(struct parport *port) { struct parport_sysctl_table *t; char *tmp_dir_path; - size_t tmp_path_len, port_name_len; - int bytes_written, i, err = 0; + int i, err = 0; t = kmemdup(&parport_sysctl_template, sizeof(*t), GFP_KERNEL); if (t == NULL) @@ -440,35 +432,23 @@ int parport_proc_register(struct parport *port) #endif /* IEEE 1284 support */ } - port_name_len = strnlen(port->name, PARPORT_NAME_MAX_LEN); - /* - * Allocate a buffer for two paths: dev/parport/PORT and dev/parport/PORT/devices. - * We calculate for the second as that will give us enough for the first. - */ - tmp_path_len = PARPORT_BASE_DEVICES_PATH_SIZE + port_name_len; - tmp_dir_path = kzalloc(tmp_path_len, GFP_KERNEL); + tmp_dir_path = kasprintf(GFP_KERNEL, "dev/parport/%s/devices", port->name); if (!tmp_dir_path) { err = -ENOMEM; goto exit_free_t; } - bytes_written = snprintf(tmp_dir_path, tmp_path_len, - "dev/parport/%s/devices", port->name); - if (tmp_path_len <= bytes_written) { - err = -ENOENT; - goto exit_free_tmp_dir_path; - } t->devices_header = register_sysctl(tmp_dir_path, t->device_dir); if (t->devices_header == NULL) { err = -ENOENT; goto exit_free_tmp_dir_path; } - tmp_path_len = PARPORT_BASE_PATH_SIZE + port_name_len; - bytes_written = snprintf(tmp_dir_path, tmp_path_len, - "dev/parport/%s", port->name); - if (tmp_path_len <= bytes_written) { - err = -ENOENT; + kfree(tmp_dir_path); + + tmp_dir_path = kasprintf(GFP_KERNEL, "dev/parport/%s", port->name); + if (!tmp_dir_path) { + err = -ENOMEM; goto unregister_devices_h; } @@ -508,34 +488,22 @@ int parport_proc_unregister(struct parport *port) int parport_device_proc_register(struct pardevice *device) { - int bytes_written, err = 0; struct parport_device_sysctl_table *t; struct parport * port = device->port; - size_t port_name_len, device_name_len, tmp_dir_path_len; char *tmp_dir_path; + int err = 0; t = kmemdup(&parport_device_sysctl_template, sizeof(*t), GFP_KERNEL); if (t == NULL) return -ENOMEM; - port_name_len = strnlen(port->name, PARPORT_NAME_MAX_LEN); - device_name_len = strnlen(device->name, PATH_MAX); - /* Allocate a buffer for two paths: dev/parport/PORT/devices/DEVICE. */ - tmp_dir_path_len = PARPORT_BASE_DEVICES_PATH_SIZE + port_name_len + device_name_len; - tmp_dir_path = kzalloc(tmp_dir_path_len, GFP_KERNEL); + tmp_dir_path = kasprintf(GFP_KERNEL, "dev/parport/%s/devices/%s", port->name, device->name); if (!tmp_dir_path) { err = -ENOMEM; goto exit_free_t; } - bytes_written = snprintf(tmp_dir_path, tmp_dir_path_len, "dev/parport/%s/devices/%s", - port->name, device->name); - if (tmp_dir_path_len <= bytes_written) { - err = -ENOENT; - goto exit_free_path; - } - t->vars[0].data = &device->timeslice; t->sysctl_header = register_sysctl(tmp_dir_path, t->vars); @@ -548,9 +516,6 @@ int parport_device_proc_register(struct pardevice *device) kfree(tmp_dir_path); return 0; -exit_free_path: - kfree(tmp_dir_path); - exit_free_t: kfree(t); diff --git a/drivers/parport/share.c b/drivers/parport/share.c index 2d46b1d4fd69..e21831d93305 100644 --- a/drivers/parport/share.c +++ b/drivers/parport/share.c @@ -361,7 +361,6 @@ static void free_port(struct device *dev) kfree(port->probe_info[d].description); } - kfree(port->name); kfree(port); } @@ -438,7 +437,6 @@ struct parport *parport_register_port(unsigned long base, int irq, int dma, struct parport *tmp; int num; int device; - char *name; int ret; tmp = kzalloc(sizeof(struct parport), GFP_KERNEL); @@ -450,13 +448,9 @@ struct parport *parport_register_port(unsigned long base, int irq, int dma, tmp->irq = irq; tmp->dma = dma; tmp->muxport = tmp->daisy = tmp->muxsel = -1; - tmp->modes = 0; INIT_LIST_HEAD(&tmp->list); - tmp->devices = tmp->cad = NULL; - tmp->flags = 0; tmp->ops = ops; tmp->physport = tmp; - memset(tmp->probe_info, 0, 5 * sizeof(struct parport_device_info)); rwlock_init(&tmp->cad_lock); spin_lock_init(&tmp->waitlist_lock); spin_lock_init(&tmp->pardevice_lock); @@ -465,19 +459,15 @@ struct parport *parport_register_port(unsigned long base, int irq, int dma, sema_init(&tmp->ieee1284.irq, 0); tmp->spintime = parport_default_spintime; atomic_set(&tmp->ref_count, 1); - INIT_LIST_HEAD(&tmp->full_list); - name = kmalloc(PARPORT_NAME_MAX_LEN, GFP_KERNEL); - if (!name) { - kfree(tmp); - return NULL; - } /* Search for the lowest free parport number. */ spin_lock(&full_list_lock); - for (l = all_ports.next, num = 0; l != &all_ports; l = l->next, num++) { + num = 0; + list_for_each(l, &all_ports) { struct parport *p = list_entry(l, struct parport, full_list); - if (p->number != num) + + if (p->number != num++) break; } tmp->portnum = tmp->number = num; @@ -487,19 +477,17 @@ struct parport *parport_register_port(unsigned long base, int irq, int dma, /* * Now that the portnum is known finish doing the Init. */ - sprintf(name, "parport%d", tmp->portnum = tmp->number); - tmp->name = name; + dev_set_name(&tmp->bus_dev, "parport%d", tmp->portnum); tmp->bus_dev.bus = &parport_bus_type; tmp->bus_dev.release = free_port; - dev_set_name(&tmp->bus_dev, name); tmp->bus_dev.type = &parport_device_type; + tmp->name = dev_name(&tmp->bus_dev); + for (device = 0; device < 5; device++) /* assume the worst */ tmp->probe_info[device].class = PARPORT_CLASS_LEGACY; - tmp->waithead = tmp->waittail = NULL; - ret = device_register(&tmp->bus_dev); if (ret) { put_device(&tmp->bus_dev); diff --git a/drivers/rapidio/devices/rio_mport_cdev.c b/drivers/rapidio/devices/rio_mport_cdev.c index a115730ebf14..27afbb9d544b 100644 --- a/drivers/rapidio/devices/rio_mport_cdev.c +++ b/drivers/rapidio/devices/rio_mport_cdev.c @@ -250,7 +250,9 @@ static DEFINE_MUTEX(mport_devs_lock); static DECLARE_WAIT_QUEUE_HEAD(mport_cdev_wait); #endif -static struct class *dev_class; +static const struct class dev_class = { + .name = DRV_NAME, +}; static dev_t dev_number; static void mport_release_mapping(struct kref *ref); @@ -2379,7 +2381,7 @@ static struct mport_dev *mport_cdev_add(struct rio_mport *mport) device_initialize(&md->dev); md->dev.devt = MKDEV(MAJOR(dev_number), mport->id); - md->dev.class = dev_class; + md->dev.class = &dev_class; md->dev.parent = &mport->dev; md->dev.release = mport_device_release; dev_set_name(&md->dev, DEV_NAME "%d", mport->id); @@ -2600,10 +2602,10 @@ static int __init mport_init(void) int ret; /* Create device class needed by udev */ - dev_class = class_create(DRV_NAME); - if (IS_ERR(dev_class)) { + ret = class_register(&dev_class); + if (ret) { rmcd_error("Unable to create " DRV_NAME " class"); - return PTR_ERR(dev_class); + return ret; } ret = alloc_chrdev_region(&dev_number, 0, RIO_MAX_MPORTS, DRV_NAME); @@ -2624,7 +2626,7 @@ static int __init mport_init(void) err_cli: unregister_chrdev_region(dev_number, RIO_MAX_MPORTS); err_chr: - class_destroy(dev_class); + class_unregister(&dev_class); return ret; } @@ -2634,7 +2636,7 @@ err_chr: static void __exit mport_exit(void) { class_interface_unregister(&rio_mport_interface); - class_destroy(dev_class); + class_unregister(&dev_class); unregister_chrdev_region(dev_number, RIO_MAX_MPORTS); } diff --git a/drivers/rapidio/rio_cm.c b/drivers/rapidio/rio_cm.c index 49f8d111e546..9135227301c8 100644 --- a/drivers/rapidio/rio_cm.c +++ b/drivers/rapidio/rio_cm.c @@ -233,7 +233,9 @@ static DEFINE_IDR(ch_idr); static LIST_HEAD(cm_dev_list); static DECLARE_RWSEM(rdev_sem); -static struct class *dev_class; +static const struct class dev_class = { + .name = DRV_NAME, +}; static unsigned int dev_major; static unsigned int dev_minor_base; static dev_t dev_number; @@ -2072,7 +2074,7 @@ static int riocm_cdev_add(dev_t devno) return ret; } - riocm_cdev.dev = device_create(dev_class, NULL, devno, NULL, DEV_NAME); + riocm_cdev.dev = device_create(&dev_class, NULL, devno, NULL, DEV_NAME); if (IS_ERR(riocm_cdev.dev)) { cdev_del(&riocm_cdev.cdev); return PTR_ERR(riocm_cdev.dev); @@ -2293,15 +2295,15 @@ static int __init riocm_init(void) int ret; /* Create device class needed by udev */ - dev_class = class_create(DRV_NAME); - if (IS_ERR(dev_class)) { + ret = class_register(&dev_class); + if (ret) { riocm_error("Cannot create " DRV_NAME " class"); - return PTR_ERR(dev_class); + return ret; } ret = alloc_chrdev_region(&dev_number, 0, 1, DRV_NAME); if (ret) { - class_destroy(dev_class); + class_unregister(&dev_class); return ret; } @@ -2349,7 +2351,7 @@ err_cl: class_interface_unregister(&rio_mport_interface); err_reg: unregister_chrdev_region(dev_number, 1); - class_destroy(dev_class); + class_unregister(&dev_class); return ret; } @@ -2364,7 +2366,7 @@ static void __exit riocm_exit(void) device_unregister(riocm_cdev.dev); cdev_del(&(riocm_cdev.cdev)); - class_destroy(dev_class); + class_unregister(&dev_class); unregister_chrdev_region(dev_number, 1); } diff --git a/drivers/rtc/nvmem.c b/drivers/rtc/nvmem.c index 07ede21cee34..37df7e80525b 100644 --- a/drivers/rtc/nvmem.c +++ b/drivers/rtc/nvmem.c @@ -21,6 +21,7 @@ int devm_rtc_nvmem_register(struct rtc_device *rtc, nvmem_config->dev = dev; nvmem_config->owner = rtc->owner; + nvmem_config->add_legacy_fixed_of_cells = true; nvmem = devm_nvmem_register(dev, nvmem_config); if (IS_ERR(nvmem)) dev_err(dev, "failed to register nvmem device for RTC\n"); diff --git a/drivers/staging/iio/Kconfig b/drivers/staging/iio/Kconfig index d3968fe2ebb8..a60631c1f449 100644 --- a/drivers/staging/iio/Kconfig +++ b/drivers/staging/iio/Kconfig @@ -10,6 +10,5 @@ source "drivers/staging/iio/adc/Kconfig" source "drivers/staging/iio/addac/Kconfig" source "drivers/staging/iio/frequency/Kconfig" source "drivers/staging/iio/impedance-analyzer/Kconfig" -source "drivers/staging/iio/resolver/Kconfig" endmenu diff --git a/drivers/staging/iio/Makefile b/drivers/staging/iio/Makefile index c50f1019f829..628583535393 100644 --- a/drivers/staging/iio/Makefile +++ b/drivers/staging/iio/Makefile @@ -8,4 +8,3 @@ obj-y += adc/ obj-y += addac/ obj-y += frequency/ obj-y += impedance-analyzer/ -obj-y += resolver/ diff --git a/drivers/staging/iio/frequency/ad9832.c b/drivers/staging/iio/frequency/ad9832.c index 6f9eebd6c7ee..6c390c4eb26d 100644 --- a/drivers/staging/iio/frequency/ad9832.c +++ b/drivers/staging/iio/frequency/ad9832.c @@ -299,11 +299,6 @@ static void ad9832_reg_disable(void *reg) regulator_disable(reg); } -static void ad9832_clk_disable(void *clk) -{ - clk_disable_unprepare(clk); -} - static int ad9832_probe(struct spi_device *spi) { struct ad9832_platform_data *pdata = dev_get_platdata(&spi->dev); @@ -350,18 +345,10 @@ static int ad9832_probe(struct spi_device *spi) if (ret) return ret; - st->mclk = devm_clk_get(&spi->dev, "mclk"); + st->mclk = devm_clk_get_enabled(&spi->dev, "mclk"); if (IS_ERR(st->mclk)) return PTR_ERR(st->mclk); - ret = clk_prepare_enable(st->mclk); - if (ret < 0) - return ret; - - ret = devm_add_action_or_reset(&spi->dev, ad9832_clk_disable, st->mclk); - if (ret) - return ret; - st->spi = spi; mutex_init(&st->lock); diff --git a/drivers/staging/iio/frequency/ad9834.c b/drivers/staging/iio/frequency/ad9834.c index 285df0e489a6..a7a5cdcc6590 100644 --- a/drivers/staging/iio/frequency/ad9834.c +++ b/drivers/staging/iio/frequency/ad9834.c @@ -394,13 +394,6 @@ static void ad9834_disable_reg(void *data) regulator_disable(reg); } -static void ad9834_disable_clk(void *data) -{ - struct clk *clk = data; - - clk_disable_unprepare(clk); -} - static int ad9834_probe(struct spi_device *spi) { struct ad9834_state *st; @@ -429,22 +422,12 @@ static int ad9834_probe(struct spi_device *spi) } st = iio_priv(indio_dev); mutex_init(&st->lock); - st->mclk = devm_clk_get(&spi->dev, NULL); + st->mclk = devm_clk_get_enabled(&spi->dev, NULL); if (IS_ERR(st->mclk)) { - ret = PTR_ERR(st->mclk); - return ret; - } - - ret = clk_prepare_enable(st->mclk); - if (ret) { dev_err(&spi->dev, "Failed to enable master clock\n"); - return ret; + return PTR_ERR(st->mclk); } - ret = devm_add_action_or_reset(&spi->dev, ad9834_disable_clk, st->mclk); - if (ret) - return ret; - st->spi = spi; st->devid = spi_get_device_id(spi)->driver_data; indio_dev->name = spi_get_device_id(spi)->name; diff --git a/drivers/staging/iio/impedance-analyzer/ad5933.c b/drivers/staging/iio/impedance-analyzer/ad5933.c index 46db6d91542a..e748a5d04e97 100644 --- a/drivers/staging/iio/impedance-analyzer/ad5933.c +++ b/drivers/staging/iio/impedance-analyzer/ad5933.c @@ -667,13 +667,6 @@ static void ad5933_reg_disable(void *data) regulator_disable(st->reg); } -static void ad5933_clk_disable(void *data) -{ - struct ad5933_state *st = data; - - clk_disable_unprepare(st->mclk); -} - static int ad5933_probe(struct i2c_client *client) { const struct i2c_device_id *id = i2c_client_get_device_id(client); @@ -712,23 +705,12 @@ static int ad5933_probe(struct i2c_client *client) st->vref_mv = ret / 1000; - st->mclk = devm_clk_get(&client->dev, "mclk"); + st->mclk = devm_clk_get_enabled(&client->dev, "mclk"); if (IS_ERR(st->mclk) && PTR_ERR(st->mclk) != -ENOENT) return PTR_ERR(st->mclk); - if (!IS_ERR(st->mclk)) { - ret = clk_prepare_enable(st->mclk); - if (ret < 0) - return ret; - - ret = devm_add_action_or_reset(&client->dev, - ad5933_clk_disable, - st); - if (ret) - return ret; - + if (!IS_ERR(st->mclk)) ext_clk_hz = clk_get_rate(st->mclk); - } if (ext_clk_hz) { st->mclk_hz = ext_clk_hz; diff --git a/drivers/staging/iio/resolver/Kconfig b/drivers/staging/iio/resolver/Kconfig deleted file mode 100644 index 6d1e2622e0b0..000000000000 --- a/drivers/staging/iio/resolver/Kconfig +++ /dev/null @@ -1,18 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Resolver/Synchro drivers -# -menu "Resolver to digital converters" - -config AD2S1210 - tristate "Analog Devices ad2s1210 driver" - depends on SPI - depends on GPIOLIB || COMPILE_TEST - help - Say yes here to build support for Analog Devices spi resolver - to digital converters, ad2s1210, provides direct access via sysfs. - - To compile this driver as a module, choose M here: the - module will be called ad2s1210. - -endmenu diff --git a/drivers/staging/iio/resolver/Makefile b/drivers/staging/iio/resolver/Makefile deleted file mode 100644 index 398631f7e79b..000000000000 --- a/drivers/staging/iio/resolver/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for Resolver/Synchro drivers -# - -obj-$(CONFIG_AD2S1210) += ad2s1210.o diff --git a/drivers/staging/iio/resolver/ad2s1210.c b/drivers/staging/iio/resolver/ad2s1210.c deleted file mode 100644 index 06de5823eb8e..000000000000 --- a/drivers/staging/iio/resolver/ad2s1210.c +++ /dev/null @@ -1,716 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * ad2s1210.c support for the ADI Resolver to Digital Converters: AD2S1210 - * - * Copyright (c) 2010-2010 Analog Devices Inc. - */ -#include <linux/types.h> -#include <linux/mutex.h> -#include <linux/device.h> -#include <linux/of.h> -#include <linux/spi/spi.h> -#include <linux/slab.h> -#include <linux/sysfs.h> -#include <linux/delay.h> -#include <linux/gpio/consumer.h> -#include <linux/module.h> - -#include <linux/iio/iio.h> -#include <linux/iio/sysfs.h> - -#define DRV_NAME "ad2s1210" - -#define AD2S1210_DEF_CONTROL 0x7E - -#define AD2S1210_MSB_IS_HIGH 0x80 -#define AD2S1210_MSB_IS_LOW 0x7F -#define AD2S1210_PHASE_LOCK_RANGE_44 0x20 -#define AD2S1210_ENABLE_HYSTERESIS 0x10 -#define AD2S1210_SET_ENRES1 0x08 -#define AD2S1210_SET_ENRES0 0x04 -#define AD2S1210_SET_RES1 0x02 -#define AD2S1210_SET_RES0 0x01 - -#define AD2S1210_SET_RESOLUTION (AD2S1210_SET_RES1 | AD2S1210_SET_RES0) - -#define AD2S1210_REG_POSITION 0x80 -#define AD2S1210_REG_VELOCITY 0x82 -#define AD2S1210_REG_LOS_THRD 0x88 -#define AD2S1210_REG_DOS_OVR_THRD 0x89 -#define AD2S1210_REG_DOS_MIS_THRD 0x8A -#define AD2S1210_REG_DOS_RST_MAX_THRD 0x8B -#define AD2S1210_REG_DOS_RST_MIN_THRD 0x8C -#define AD2S1210_REG_LOT_HIGH_THRD 0x8D -#define AD2S1210_REG_LOT_LOW_THRD 0x8E -#define AD2S1210_REG_EXCIT_FREQ 0x91 -#define AD2S1210_REG_CONTROL 0x92 -#define AD2S1210_REG_SOFT_RESET 0xF0 -#define AD2S1210_REG_FAULT 0xFF - -#define AD2S1210_MIN_CLKIN 6144000 -#define AD2S1210_MAX_CLKIN 10240000 -#define AD2S1210_MIN_EXCIT 2000 -#define AD2S1210_MAX_EXCIT 20000 -#define AD2S1210_MIN_FCW 0x4 -#define AD2S1210_MAX_FCW 0x50 - -#define AD2S1210_DEF_EXCIT 10000 - -enum ad2s1210_mode { - MOD_POS = 0, - MOD_VEL, - MOD_CONFIG, - MOD_RESERVED, -}; - -enum ad2s1210_gpios { - AD2S1210_SAMPLE, - AD2S1210_A0, - AD2S1210_A1, - AD2S1210_RES0, - AD2S1210_RES1, -}; - -struct ad2s1210_gpio { - const char *name; - unsigned long flags; -}; - -static const struct ad2s1210_gpio gpios[] = { - [AD2S1210_SAMPLE] = { .name = "adi,sample", .flags = GPIOD_OUT_LOW }, - [AD2S1210_A0] = { .name = "adi,a0", .flags = GPIOD_OUT_LOW }, - [AD2S1210_A1] = { .name = "adi,a1", .flags = GPIOD_OUT_LOW }, - [AD2S1210_RES0] = { .name = "adi,res0", .flags = GPIOD_OUT_LOW }, - [AD2S1210_RES1] = { .name = "adi,res1", .flags = GPIOD_OUT_LOW }, -}; - -static const unsigned int ad2s1210_resolution_value[] = { 10, 12, 14, 16 }; - -struct ad2s1210_state { - struct mutex lock; - struct spi_device *sdev; - struct gpio_desc *gpios[5]; - unsigned int fclkin; - unsigned int fexcit; - bool hysteresis; - u8 resolution; - enum ad2s1210_mode mode; - u8 rx[2] __aligned(IIO_DMA_MINALIGN); - u8 tx[2]; -}; - -static const int ad2s1210_mode_vals[4][2] = { - [MOD_POS] = { 0, 0 }, - [MOD_VEL] = { 0, 1 }, - [MOD_CONFIG] = { 1, 1 }, -}; - -static inline void ad2s1210_set_mode(enum ad2s1210_mode mode, - struct ad2s1210_state *st) -{ - gpiod_set_value(st->gpios[AD2S1210_A0], ad2s1210_mode_vals[mode][0]); - gpiod_set_value(st->gpios[AD2S1210_A1], ad2s1210_mode_vals[mode][1]); - st->mode = mode; -} - -/* write 1 bytes (address or data) to the chip */ -static int ad2s1210_config_write(struct ad2s1210_state *st, u8 data) -{ - int ret; - - ad2s1210_set_mode(MOD_CONFIG, st); - st->tx[0] = data; - ret = spi_write(st->sdev, st->tx, 1); - if (ret < 0) - return ret; - - return 0; -} - -/* read value from one of the registers */ -static int ad2s1210_config_read(struct ad2s1210_state *st, - unsigned char address) -{ - struct spi_transfer xfers[] = { - { - .len = 1, - .rx_buf = &st->rx[0], - .tx_buf = &st->tx[0], - .cs_change = 1, - }, { - .len = 1, - .rx_buf = &st->rx[1], - .tx_buf = &st->tx[1], - }, - }; - int ret = 0; - - ad2s1210_set_mode(MOD_CONFIG, st); - st->tx[0] = address | AD2S1210_MSB_IS_HIGH; - st->tx[1] = AD2S1210_REG_FAULT; - ret = spi_sync_transfer(st->sdev, xfers, 2); - if (ret < 0) - return ret; - - return st->rx[1]; -} - -static inline -int ad2s1210_update_frequency_control_word(struct ad2s1210_state *st) -{ - int ret; - unsigned char fcw; - - fcw = (unsigned char)(st->fexcit * (1 << 15) / st->fclkin); - if (fcw < AD2S1210_MIN_FCW || fcw > AD2S1210_MAX_FCW) { - dev_err(&st->sdev->dev, "ad2s1210: FCW out of range\n"); - return -ERANGE; - } - - ret = ad2s1210_config_write(st, AD2S1210_REG_EXCIT_FREQ); - if (ret < 0) - return ret; - - return ad2s1210_config_write(st, fcw); -} - -static const int ad2s1210_res_pins[4][2] = { - { 0, 0 }, {0, 1}, {1, 0}, {1, 1} -}; - -static inline void ad2s1210_set_resolution_pin(struct ad2s1210_state *st) -{ - gpiod_set_value(st->gpios[AD2S1210_RES0], - ad2s1210_res_pins[(st->resolution - 10) / 2][0]); - gpiod_set_value(st->gpios[AD2S1210_RES1], - ad2s1210_res_pins[(st->resolution - 10) / 2][1]); -} - -static inline int ad2s1210_soft_reset(struct ad2s1210_state *st) -{ - int ret; - - ret = ad2s1210_config_write(st, AD2S1210_REG_SOFT_RESET); - if (ret < 0) - return ret; - - return ad2s1210_config_write(st, 0x0); -} - -static ssize_t ad2s1210_show_fclkin(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev)); - - return sprintf(buf, "%u\n", st->fclkin); -} - -static ssize_t ad2s1210_store_fclkin(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t len) -{ - struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev)); - unsigned int fclkin; - int ret; - - ret = kstrtouint(buf, 10, &fclkin); - if (ret) - return ret; - if (fclkin < AD2S1210_MIN_CLKIN || fclkin > AD2S1210_MAX_CLKIN) { - dev_err(dev, "ad2s1210: fclkin out of range\n"); - return -EINVAL; - } - - mutex_lock(&st->lock); - st->fclkin = fclkin; - - ret = ad2s1210_update_frequency_control_word(st); - if (ret < 0) - goto error_ret; - ret = ad2s1210_soft_reset(st); -error_ret: - mutex_unlock(&st->lock); - - return ret < 0 ? ret : len; -} - -static ssize_t ad2s1210_show_fexcit(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev)); - - return sprintf(buf, "%u\n", st->fexcit); -} - -static ssize_t ad2s1210_store_fexcit(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t len) -{ - struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev)); - unsigned int fexcit; - int ret; - - ret = kstrtouint(buf, 10, &fexcit); - if (ret < 0) - return ret; - if (fexcit < AD2S1210_MIN_EXCIT || fexcit > AD2S1210_MAX_EXCIT) { - dev_err(dev, - "ad2s1210: excitation frequency out of range\n"); - return -EINVAL; - } - mutex_lock(&st->lock); - st->fexcit = fexcit; - ret = ad2s1210_update_frequency_control_word(st); - if (ret < 0) - goto error_ret; - ret = ad2s1210_soft_reset(st); -error_ret: - mutex_unlock(&st->lock); - - return ret < 0 ? ret : len; -} - -static ssize_t ad2s1210_show_control(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev)); - int ret; - - mutex_lock(&st->lock); - ret = ad2s1210_config_read(st, AD2S1210_REG_CONTROL); - mutex_unlock(&st->lock); - return ret < 0 ? ret : sprintf(buf, "0x%x\n", ret); -} - -static ssize_t ad2s1210_store_control(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t len) -{ - struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev)); - unsigned char udata; - unsigned char data; - int ret; - - ret = kstrtou8(buf, 16, &udata); - if (ret) - return -EINVAL; - - mutex_lock(&st->lock); - ret = ad2s1210_config_write(st, AD2S1210_REG_CONTROL); - if (ret < 0) - goto error_ret; - data = udata & AD2S1210_MSB_IS_LOW; - ret = ad2s1210_config_write(st, data); - if (ret < 0) - goto error_ret; - - ret = ad2s1210_config_read(st, AD2S1210_REG_CONTROL); - if (ret < 0) - goto error_ret; - if (ret & AD2S1210_MSB_IS_HIGH) { - ret = -EIO; - dev_err(dev, - "ad2s1210: write control register fail\n"); - goto error_ret; - } - st->resolution = - ad2s1210_resolution_value[data & AD2S1210_SET_RESOLUTION]; - ad2s1210_set_resolution_pin(st); - ret = len; - st->hysteresis = !!(data & AD2S1210_ENABLE_HYSTERESIS); - -error_ret: - mutex_unlock(&st->lock); - return ret; -} - -static ssize_t ad2s1210_show_resolution(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev)); - - return sprintf(buf, "%d\n", st->resolution); -} - -static ssize_t ad2s1210_store_resolution(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t len) -{ - struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev)); - unsigned char data; - unsigned char udata; - int ret; - - ret = kstrtou8(buf, 10, &udata); - if (ret || udata < 10 || udata > 16) { - dev_err(dev, "ad2s1210: resolution out of range\n"); - return -EINVAL; - } - mutex_lock(&st->lock); - ret = ad2s1210_config_read(st, AD2S1210_REG_CONTROL); - if (ret < 0) - goto error_ret; - data = ret; - data &= ~AD2S1210_SET_RESOLUTION; - data |= (udata - 10) >> 1; - ret = ad2s1210_config_write(st, AD2S1210_REG_CONTROL); - if (ret < 0) - goto error_ret; - ret = ad2s1210_config_write(st, data & AD2S1210_MSB_IS_LOW); - if (ret < 0) - goto error_ret; - ret = ad2s1210_config_read(st, AD2S1210_REG_CONTROL); - if (ret < 0) - goto error_ret; - data = ret; - if (data & AD2S1210_MSB_IS_HIGH) { - ret = -EIO; - dev_err(dev, "ad2s1210: setting resolution fail\n"); - goto error_ret; - } - st->resolution = - ad2s1210_resolution_value[data & AD2S1210_SET_RESOLUTION]; - ad2s1210_set_resolution_pin(st); - ret = len; -error_ret: - mutex_unlock(&st->lock); - return ret; -} - -/* read the fault register since last sample */ -static ssize_t ad2s1210_show_fault(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev)); - int ret; - - mutex_lock(&st->lock); - ret = ad2s1210_config_read(st, AD2S1210_REG_FAULT); - mutex_unlock(&st->lock); - - return ret ? ret : sprintf(buf, "0x%x\n", ret); -} - -static ssize_t ad2s1210_clear_fault(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t len) -{ - struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev)); - int ret; - - mutex_lock(&st->lock); - gpiod_set_value(st->gpios[AD2S1210_SAMPLE], 0); - /* delay (2 * tck + 20) nano seconds */ - udelay(1); - gpiod_set_value(st->gpios[AD2S1210_SAMPLE], 1); - ret = ad2s1210_config_read(st, AD2S1210_REG_FAULT); - if (ret < 0) - goto error_ret; - gpiod_set_value(st->gpios[AD2S1210_SAMPLE], 0); - gpiod_set_value(st->gpios[AD2S1210_SAMPLE], 1); -error_ret: - mutex_unlock(&st->lock); - - return ret < 0 ? ret : len; -} - -static ssize_t ad2s1210_show_reg(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev)); - struct iio_dev_attr *iattr = to_iio_dev_attr(attr); - int ret; - - mutex_lock(&st->lock); - ret = ad2s1210_config_read(st, iattr->address); - mutex_unlock(&st->lock); - - return ret < 0 ? ret : sprintf(buf, "%d\n", ret); -} - -static ssize_t ad2s1210_store_reg(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t len) -{ - struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev)); - unsigned char data; - int ret; - struct iio_dev_attr *iattr = to_iio_dev_attr(attr); - - ret = kstrtou8(buf, 10, &data); - if (ret) - return -EINVAL; - mutex_lock(&st->lock); - ret = ad2s1210_config_write(st, iattr->address); - if (ret < 0) - goto error_ret; - ret = ad2s1210_config_write(st, data & AD2S1210_MSB_IS_LOW); -error_ret: - mutex_unlock(&st->lock); - return ret < 0 ? ret : len; -} - -static int ad2s1210_read_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int *val, - int *val2, - long m) -{ - struct ad2s1210_state *st = iio_priv(indio_dev); - u16 negative; - int ret = 0; - u16 pos; - s16 vel; - - mutex_lock(&st->lock); - gpiod_set_value(st->gpios[AD2S1210_SAMPLE], 0); - /* delay (6 * tck + 20) nano seconds */ - udelay(1); - - switch (chan->type) { - case IIO_ANGL: - ad2s1210_set_mode(MOD_POS, st); - break; - case IIO_ANGL_VEL: - ad2s1210_set_mode(MOD_VEL, st); - break; - default: - ret = -EINVAL; - break; - } - if (ret < 0) - goto error_ret; - ret = spi_read(st->sdev, st->rx, 2); - if (ret < 0) - goto error_ret; - - switch (chan->type) { - case IIO_ANGL: - pos = be16_to_cpup((__be16 *)st->rx); - if (st->hysteresis) - pos >>= 16 - st->resolution; - *val = pos; - ret = IIO_VAL_INT; - break; - case IIO_ANGL_VEL: - vel = be16_to_cpup((__be16 *)st->rx); - vel >>= 16 - st->resolution; - if (vel & 0x8000) { - negative = (0xffff >> st->resolution) << st->resolution; - vel |= negative; - } - *val = vel; - ret = IIO_VAL_INT; - break; - default: - mutex_unlock(&st->lock); - return -EINVAL; - } - -error_ret: - gpiod_set_value(st->gpios[AD2S1210_SAMPLE], 1); - /* delay (2 * tck + 20) nano seconds */ - udelay(1); - mutex_unlock(&st->lock); - return ret; -} - -static IIO_DEVICE_ATTR(fclkin, 0644, - ad2s1210_show_fclkin, ad2s1210_store_fclkin, 0); -static IIO_DEVICE_ATTR(fexcit, 0644, - ad2s1210_show_fexcit, ad2s1210_store_fexcit, 0); -static IIO_DEVICE_ATTR(control, 0644, - ad2s1210_show_control, ad2s1210_store_control, 0); -static IIO_DEVICE_ATTR(bits, 0644, - ad2s1210_show_resolution, ad2s1210_store_resolution, 0); -static IIO_DEVICE_ATTR(fault, 0644, - ad2s1210_show_fault, ad2s1210_clear_fault, 0); - -static IIO_DEVICE_ATTR(los_thrd, 0644, - ad2s1210_show_reg, ad2s1210_store_reg, - AD2S1210_REG_LOS_THRD); -static IIO_DEVICE_ATTR(dos_ovr_thrd, 0644, - ad2s1210_show_reg, ad2s1210_store_reg, - AD2S1210_REG_DOS_OVR_THRD); -static IIO_DEVICE_ATTR(dos_mis_thrd, 0644, - ad2s1210_show_reg, ad2s1210_store_reg, - AD2S1210_REG_DOS_MIS_THRD); -static IIO_DEVICE_ATTR(dos_rst_max_thrd, 0644, - ad2s1210_show_reg, ad2s1210_store_reg, - AD2S1210_REG_DOS_RST_MAX_THRD); -static IIO_DEVICE_ATTR(dos_rst_min_thrd, 0644, - ad2s1210_show_reg, ad2s1210_store_reg, - AD2S1210_REG_DOS_RST_MIN_THRD); -static IIO_DEVICE_ATTR(lot_high_thrd, 0644, - ad2s1210_show_reg, ad2s1210_store_reg, - AD2S1210_REG_LOT_HIGH_THRD); -static IIO_DEVICE_ATTR(lot_low_thrd, 0644, - ad2s1210_show_reg, ad2s1210_store_reg, - AD2S1210_REG_LOT_LOW_THRD); - -static const struct iio_chan_spec ad2s1210_channels[] = { - { - .type = IIO_ANGL, - .indexed = 1, - .channel = 0, - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - }, { - .type = IIO_ANGL_VEL, - .indexed = 1, - .channel = 0, - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - } -}; - -static struct attribute *ad2s1210_attributes[] = { - &iio_dev_attr_fclkin.dev_attr.attr, - &iio_dev_attr_fexcit.dev_attr.attr, - &iio_dev_attr_control.dev_attr.attr, - &iio_dev_attr_bits.dev_attr.attr, - &iio_dev_attr_fault.dev_attr.attr, - &iio_dev_attr_los_thrd.dev_attr.attr, - &iio_dev_attr_dos_ovr_thrd.dev_attr.attr, - &iio_dev_attr_dos_mis_thrd.dev_attr.attr, - &iio_dev_attr_dos_rst_max_thrd.dev_attr.attr, - &iio_dev_attr_dos_rst_min_thrd.dev_attr.attr, - &iio_dev_attr_lot_high_thrd.dev_attr.attr, - &iio_dev_attr_lot_low_thrd.dev_attr.attr, - NULL, -}; - -static const struct attribute_group ad2s1210_attribute_group = { - .attrs = ad2s1210_attributes, -}; - -static int ad2s1210_initial(struct ad2s1210_state *st) -{ - unsigned char data; - int ret; - - mutex_lock(&st->lock); - ad2s1210_set_resolution_pin(st); - - ret = ad2s1210_config_write(st, AD2S1210_REG_CONTROL); - if (ret < 0) - goto error_ret; - data = AD2S1210_DEF_CONTROL & ~(AD2S1210_SET_RESOLUTION); - data |= (st->resolution - 10) >> 1; - ret = ad2s1210_config_write(st, data); - if (ret < 0) - goto error_ret; - ret = ad2s1210_config_read(st, AD2S1210_REG_CONTROL); - if (ret < 0) - goto error_ret; - - if (ret & AD2S1210_MSB_IS_HIGH) { - ret = -EIO; - goto error_ret; - } - - ret = ad2s1210_update_frequency_control_word(st); - if (ret < 0) - goto error_ret; - ret = ad2s1210_soft_reset(st); -error_ret: - mutex_unlock(&st->lock); - return ret; -} - -static const struct iio_info ad2s1210_info = { - .read_raw = ad2s1210_read_raw, - .attrs = &ad2s1210_attribute_group, -}; - -static int ad2s1210_setup_gpios(struct ad2s1210_state *st) -{ - struct spi_device *spi = st->sdev; - int i, ret; - - for (i = 0; i < ARRAY_SIZE(gpios); i++) { - st->gpios[i] = devm_gpiod_get(&spi->dev, gpios[i].name, - gpios[i].flags); - if (IS_ERR(st->gpios[i])) { - ret = PTR_ERR(st->gpios[i]); - dev_err(&spi->dev, - "ad2s1210: failed to request %s GPIO: %d\n", - gpios[i].name, ret); - return ret; - } - } - - return 0; -} - -static int ad2s1210_probe(struct spi_device *spi) -{ - struct iio_dev *indio_dev; - struct ad2s1210_state *st; - int ret; - - indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); - if (!indio_dev) - return -ENOMEM; - st = iio_priv(indio_dev); - ret = ad2s1210_setup_gpios(st); - if (ret < 0) - return ret; - - spi_set_drvdata(spi, indio_dev); - - mutex_init(&st->lock); - st->sdev = spi; - st->hysteresis = true; - st->mode = MOD_CONFIG; - st->resolution = 12; - st->fexcit = AD2S1210_DEF_EXCIT; - - indio_dev->info = &ad2s1210_info; - indio_dev->modes = INDIO_DIRECT_MODE; - indio_dev->channels = ad2s1210_channels; - indio_dev->num_channels = ARRAY_SIZE(ad2s1210_channels); - indio_dev->name = spi_get_device_id(spi)->name; - - ret = devm_iio_device_register(&spi->dev, indio_dev); - if (ret) - return ret; - - st->fclkin = spi->max_speed_hz; - spi->mode = SPI_MODE_3; - spi_setup(spi); - ad2s1210_initial(st); - - return 0; -} - -static const struct of_device_id ad2s1210_of_match[] = { - { .compatible = "adi,ad2s1210", }, - { } -}; -MODULE_DEVICE_TABLE(of, ad2s1210_of_match); - -static const struct spi_device_id ad2s1210_id[] = { - { "ad2s1210" }, - {} -}; -MODULE_DEVICE_TABLE(spi, ad2s1210_id); - -static struct spi_driver ad2s1210_driver = { - .driver = { - .name = DRV_NAME, - .of_match_table = of_match_ptr(ad2s1210_of_match), - }, - .probe = ad2s1210_probe, - .id_table = ad2s1210_id, -}; -module_spi_driver(ad2s1210_driver); - -MODULE_AUTHOR("Graff Yang <graff.yang@gmail.com>"); -MODULE_DESCRIPTION("Analog Devices AD2S1210 Resolver to Digital SPI driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/tee/tee_core.c b/drivers/tee/tee_core.c index 0eb342de0b00..5ddfd5d9ac7f 100644 --- a/drivers/tee/tee_core.c +++ b/drivers/tee/tee_core.c @@ -40,7 +40,10 @@ static const uuid_t tee_client_uuid_ns = UUID_INIT(0x58ac9ca0, 0x2086, 0x4683, static DECLARE_BITMAP(dev_mask, TEE_NUM_DEVICES); static DEFINE_SPINLOCK(driver_lock); -static struct class *tee_class; +static const struct class tee_class = { + .name = "tee", +}; + static dev_t tee_devt; struct tee_context *teedev_open(struct tee_device *teedev) @@ -919,7 +922,7 @@ struct tee_device *tee_device_alloc(const struct tee_desc *teedesc, teedesc->flags & TEE_DESC_PRIVILEGED ? "priv" : "", teedev->id - offs); - teedev->dev.class = tee_class; + teedev->dev.class = &tee_class; teedev->dev.release = tee_release_device; teedev->dev.parent = dev; @@ -1112,7 +1115,7 @@ tee_client_open_context(struct tee_context *start, dev = &start->teedev->dev; do { - dev = class_find_device(tee_class, dev, &match_data, match_dev); + dev = class_find_device(&tee_class, dev, &match_data, match_dev); if (!dev) { ctx = ERR_PTR(-ENOENT); break; @@ -1226,10 +1229,10 @@ static int __init tee_init(void) { int rc; - tee_class = class_create("tee"); - if (IS_ERR(tee_class)) { + rc = class_register(&tee_class); + if (rc) { pr_err("couldn't create class\n"); - return PTR_ERR(tee_class); + return rc; } rc = alloc_chrdev_region(&tee_devt, 0, TEE_NUM_DEVICES, "tee"); @@ -1249,8 +1252,7 @@ static int __init tee_init(void) out_unreg_chrdev: unregister_chrdev_region(tee_devt, TEE_NUM_DEVICES); out_unreg_class: - class_destroy(tee_class); - tee_class = NULL; + class_unregister(&tee_class); return rc; } @@ -1259,8 +1261,7 @@ static void __exit tee_exit(void) { bus_unregister(&tee_bus_type); unregister_chrdev_region(tee_devt, TEE_NUM_DEVICES); - class_destroy(tee_class); - tee_class = NULL; + class_unregister(&tee_class); } subsys_initcall(tee_init); diff --git a/drivers/vfio/cdx/main.c b/drivers/vfio/cdx/main.c index a63744302b5e..9cff8d75789e 100644 --- a/drivers/vfio/cdx/main.c +++ b/drivers/vfio/cdx/main.c @@ -286,3 +286,4 @@ module_driver(vfio_cdx_driver, cdx_driver_register, cdx_driver_unregister); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("VFIO for CDX devices - User Level meta-driver"); +MODULE_IMPORT_NS(CDX_BUS); diff --git a/drivers/w1/slaves/w1_ds250x.c b/drivers/w1/slaves/w1_ds250x.c index 7592c7050d1d..cb426f7dd23d 100644 --- a/drivers/w1/slaves/w1_ds250x.c +++ b/drivers/w1/slaves/w1_ds250x.c @@ -168,6 +168,7 @@ static int w1_eprom_add_slave(struct w1_slave *sl) struct nvmem_device *nvmem; struct nvmem_config nvmem_cfg = { .dev = &sl->dev, + .add_legacy_fixed_of_cells = true, .reg_read = w1_nvmem_read, .type = NVMEM_TYPE_OTP, .read_only = true, diff --git a/include/drm/i915_pxp_tee_interface.h b/include/drm/i915_pxp_tee_interface.h index a702b6ec17f7..7d96985f2d05 100644 --- a/include/drm/i915_pxp_tee_interface.h +++ b/include/drm/i915_pxp_tee_interface.h @@ -22,8 +22,10 @@ struct i915_pxp_component_ops { */ struct module *owner; - int (*send)(struct device *dev, const void *message, size_t size); - int (*recv)(struct device *dev, void *buffer, size_t size); + int (*send)(struct device *dev, const void *message, size_t size, + unsigned long timeout_ms); + int (*recv)(struct device *dev, void *buffer, size_t size, + unsigned long timeout_ms); ssize_t (*gsc_command)(struct device *dev, u8 client_id, u32 fence_id, struct scatterlist *sg_in, size_t total_in_len, struct scatterlist *sg_out); diff --git a/include/dt-bindings/interconnect/qcom,sdx75.h b/include/dt-bindings/interconnect/qcom,sdx75.h new file mode 100644 index 000000000000..e903f5f3dd8f --- /dev/null +++ b/include/dt-bindings/interconnect/qcom,sdx75.h @@ -0,0 +1,102 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) */ +/* + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_SDX75_H +#define __DT_BINDINGS_INTERCONNECT_QCOM_SDX75_H + +#define MASTER_QPIC_CORE 0 +#define MASTER_QUP_CORE_0 1 +#define SLAVE_QPIC_CORE 2 +#define SLAVE_QUP_CORE_0 3 + +#define MASTER_LLCC 0 +#define SLAVE_EBI1 1 + +#define MASTER_CNOC_DC_NOC 0 +#define SLAVE_LAGG_CFG 1 +#define SLAVE_MCCC_MASTER 2 +#define SLAVE_GEM_NOC_CFG 3 +#define SLAVE_SNOOP_BWMON 4 + +#define MASTER_SYS_TCU 0 +#define MASTER_APPSS_PROC 1 +#define MASTER_GEM_NOC_CFG 2 +#define MASTER_MSS_PROC 3 +#define MASTER_ANOC_PCIE_GEM_NOC 4 +#define MASTER_SNOC_SF_MEM_NOC 5 +#define MASTER_GIC 6 +#define MASTER_IPA_PCIE 7 +#define SLAVE_GEM_NOC_CNOC 8 +#define SLAVE_LLCC 9 +#define SLAVE_MEM_NOC_PCIE_SNOC 10 +#define SLAVE_SERVICE_GEM_NOC 11 + +#define MASTER_PCIE_0 0 +#define MASTER_PCIE_1 1 +#define MASTER_PCIE_2 2 +#define SLAVE_ANOC_PCIE_GEM_NOC 3 + +#define MASTER_AUDIO 0 +#define MASTER_GIC_AHB 1 +#define MASTER_PCIE_RSCC 2 +#define MASTER_QDSS_BAM 3 +#define MASTER_QPIC 4 +#define MASTER_QUP_0 5 +#define MASTER_ANOC_SNOC 6 +#define MASTER_GEM_NOC_CNOC 7 +#define MASTER_GEM_NOC_PCIE_SNOC 8 +#define MASTER_SNOC_CFG 9 +#define MASTER_PCIE_ANOC_CFG 10 +#define MASTER_CRYPTO 11 +#define MASTER_IPA 12 +#define MASTER_MVMSS 13 +#define MASTER_EMAC_0 14 +#define MASTER_EMAC_1 15 +#define MASTER_QDSS_ETR 16 +#define MASTER_QDSS_ETR_1 17 +#define MASTER_SDCC_1 18 +#define MASTER_SDCC_4 19 +#define MASTER_USB3_0 20 +#define SLAVE_ETH0_CFG 21 +#define SLAVE_ETH1_CFG 22 +#define SLAVE_AUDIO 23 +#define SLAVE_CLK_CTL 24 +#define SLAVE_CRYPTO_0_CFG 25 +#define SLAVE_IMEM_CFG 26 +#define SLAVE_IPA_CFG 27 +#define SLAVE_IPC_ROUTER_CFG 28 +#define SLAVE_CNOC_MSS 29 +#define SLAVE_ICBDI_MVMSS_CFG 30 +#define SLAVE_PCIE_0_CFG 31 +#define SLAVE_PCIE_1_CFG 32 +#define SLAVE_PCIE_2_CFG 33 +#define SLAVE_PCIE_RSC_CFG 34 +#define SLAVE_PDM 35 +#define SLAVE_PRNG 36 +#define SLAVE_QDSS_CFG 37 +#define SLAVE_QPIC 38 +#define SLAVE_QUP_0 39 +#define SLAVE_SDCC_1 40 +#define SLAVE_SDCC_4 41 +#define SLAVE_SPMI_VGI_COEX 42 +#define SLAVE_TCSR 43 +#define SLAVE_TLMM 44 +#define SLAVE_USB3 45 +#define SLAVE_USB3_PHY_CFG 46 +#define SLAVE_A1NOC_CFG 47 +#define SLAVE_DDRSS_CFG 48 +#define SLAVE_SNOC_GEM_NOC_SF 49 +#define SLAVE_SNOC_CFG 50 +#define SLAVE_PCIE_ANOC_CFG 51 +#define SLAVE_IMEM 52 +#define SLAVE_SERVICE_PCIE_ANOC 53 +#define SLAVE_SERVICE_SNOC 54 +#define SLAVE_PCIE_0 55 +#define SLAVE_PCIE_1 56 +#define SLAVE_PCIE_2 57 +#define SLAVE_QDSS_STM 58 +#define SLAVE_TCU 59 + +#endif diff --git a/include/linux/cdx/cdx_bus.h b/include/linux/cdx/cdx_bus.h index 8320ec3b9e37..94ad2c9017c9 100644 --- a/include/linux/cdx/cdx_bus.h +++ b/include/linux/cdx/cdx_bus.h @@ -30,6 +30,10 @@ struct cdx_device_config { bool bus_master_enable; }; +typedef int (*cdx_bus_enable_cb)(struct cdx_controller *cdx, u8 bus_num); + +typedef int (*cdx_bus_disable_cb)(struct cdx_controller *cdx, u8 bus_num); + typedef int (*cdx_scan_cb)(struct cdx_controller *cdx); typedef int (*cdx_dev_configure_cb)(struct cdx_controller *cdx, @@ -37,6 +41,19 @@ typedef int (*cdx_dev_configure_cb)(struct cdx_controller *cdx, struct cdx_device_config *dev_config); /** + * CDX_DEVICE - macro used to describe a specific CDX device + * @vend: the 16 bit CDX Vendor ID + * @dev: the 16 bit CDX Device ID + * + * This macro is used to create a struct cdx_device_id that matches a + * specific device. The subvendor and subdevice fields will be set to + * CDX_ANY_ID. + */ +#define CDX_DEVICE(vend, dev) \ + .vendor = (vend), .device = (dev), \ + .subvendor = CDX_ANY_ID, .subdevice = CDX_ANY_ID + +/** * CDX_DEVICE_DRIVER_OVERRIDE - macro used to describe a CDX device with * override_only flags. * @vend: the 16 bit CDX Vendor ID @@ -44,18 +61,24 @@ typedef int (*cdx_dev_configure_cb)(struct cdx_controller *cdx, * @driver_override: the 32 bit CDX Device override_only * * This macro is used to create a struct cdx_device_id that matches only a - * driver_override device. + * driver_override device. The subvendor and subdevice fields will be set to + * CDX_ANY_ID. */ #define CDX_DEVICE_DRIVER_OVERRIDE(vend, dev, driver_override) \ - .vendor = (vend), .device = (dev), .override_only = (driver_override) + .vendor = (vend), .device = (dev), .subvendor = CDX_ANY_ID,\ + .subdevice = CDX_ANY_ID, .override_only = (driver_override) /** * struct cdx_ops - Callbacks supported by CDX controller. + * @bus_enable: enable bus on the controller + * @bus_disable: disable bus on the controller * @scan: scan the devices on the controller * @dev_configure: configuration like reset, master_enable, * msi_config etc for a CDX device */ struct cdx_ops { + cdx_bus_enable_cb bus_enable; + cdx_bus_disable_cb bus_disable; cdx_scan_cb scan; cdx_dev_configure_cb dev_configure; }; @@ -65,12 +88,14 @@ struct cdx_ops { * @dev: Linux device associated with the CDX controller. * @priv: private data * @id: Controller ID + * @controller_registered: controller registered with bus * @ops: CDX controller ops */ struct cdx_controller { struct device *dev; void *priv; u32 id; + bool controller_registered; struct cdx_ops *ops; }; @@ -80,6 +105,10 @@ struct cdx_controller { * @cdx: CDX controller associated with the device * @vendor: Vendor ID for CDX device * @device: Device ID for CDX device + * @subsystem_vendor: Subsystem Vendor ID for CDX device + * @subsystem_device: Subsystem Device ID for CDX device + * @class: Class for the CDX device + * @revision: Revision of the CDX device * @bus_num: Bus number for this CDX device * @dev_num: Device number for this device * @res: array of MMIO region entries @@ -88,6 +117,8 @@ struct cdx_controller { * @dma_mask: Default DMA mask * @flags: CDX device flags * @req_id: Requestor ID associated with CDX device + * @is_bus: Is this bus device + * @enabled: is this bus enabled * @driver_override: driver name to force a match; do not set directly, * because core frees it; use driver_set_override() to * set or clear it. @@ -97,6 +128,10 @@ struct cdx_device { struct cdx_controller *cdx; u16 vendor; u16 device; + u16 subsystem_vendor; + u16 subsystem_device; + u32 class; + u8 revision; u8 bus_num; u8 dev_num; struct resource res[MAX_CDX_DEV_RESOURCES]; @@ -104,6 +139,8 @@ struct cdx_device { u64 dma_mask; u16 flags; u32 req_id; + bool is_bus; + bool enabled; const char *driver_override; }; diff --git a/include/linux/comedi/comedi_8254.h b/include/linux/comedi/comedi_8254.h index d8264417e53c..d527f04400df 100644 --- a/include/linux/comedi/comedi_8254.h +++ b/include/linux/comedi/comedi_8254.h @@ -12,6 +12,8 @@ #define _COMEDI_8254_H #include <linux/types.h> +#include <linux/errno.h> +#include <linux/err.h> struct comedi_device; struct comedi_insn; @@ -57,10 +59,24 @@ struct comedi_subdevice; /* counter maps zero to 0x10000 */ #define I8254_MAX_COUNT 0x10000 +struct comedi_8254; + +/** + * typedef comedi_8254_iocb_fn - call-back function type for 8254 register access + * @i8254: pointer to struct comedi_8254 + * @dir: direction (0 = read, 1 = write) + * @reg: register number + * @val: value to write + * + * Return: Register value when reading, 0 when writing. + */ +typedef unsigned int comedi_8254_iocb_fn(struct comedi_8254 *i8254, int dir, + unsigned int reg, unsigned int val); + /** * struct comedi_8254 - private data used by this module - * @iobase: PIO base address of the registers (in/out) - * @mmio: MMIO base address of the registers (read/write) + * @iocb: I/O call-back function for register access + * @context: context for register access (e.g. a base address) * @iosize: I/O size used to access the registers (b/w/l) * @regshift: register gap shift * @osc_base: cascaded oscillator speed in ns @@ -76,8 +92,8 @@ struct comedi_subdevice; * @insn_config: driver specific (*insn_config) callback */ struct comedi_8254 { - unsigned long iobase; - void __iomem *mmio; + comedi_8254_iocb_fn *iocb; + unsigned long context; unsigned int iosize; unsigned int regshift; unsigned int osc_base; @@ -122,13 +138,24 @@ void comedi_8254_set_busy(struct comedi_8254 *i8254, void comedi_8254_subdevice_init(struct comedi_subdevice *s, struct comedi_8254 *i8254); -struct comedi_8254 *comedi_8254_init(unsigned long iobase, - unsigned int osc_base, - unsigned int iosize, - unsigned int regshift); -struct comedi_8254 *comedi_8254_mm_init(void __iomem *mmio, - unsigned int osc_base, - unsigned int iosize, - unsigned int regshift); +#ifdef CONFIG_HAS_IOPORT +struct comedi_8254 *comedi_8254_io_alloc(unsigned long iobase, + unsigned int osc_base, + unsigned int iosize, + unsigned int regshift); +#else +static inline struct comedi_8254 *comedi_8254_io_alloc(unsigned long iobase, + unsigned int osc_base, + unsigned int iosize, + unsigned int regshift) +{ + return ERR_PTR(-ENXIO); +} +#endif + +struct comedi_8254 *comedi_8254_mm_alloc(void __iomem *mmio, + unsigned int osc_base, + unsigned int iosize, + unsigned int regshift); #endif /* _COMEDI_8254_H */ diff --git a/include/linux/comedi/comedi_8255.h b/include/linux/comedi/comedi_8255.h index b2a5bc6b3a49..d24a69da389b 100644 --- a/include/linux/comedi/comedi_8255.h +++ b/include/linux/comedi/comedi_8255.h @@ -10,6 +10,8 @@ #ifndef _COMEDI_8255_H #define _COMEDI_8255_H +#include <linux/errno.h> + #define I8255_SIZE 0x04 #define I8255_DATA_A_REG 0x00 @@ -27,16 +29,26 @@ struct comedi_device; struct comedi_subdevice; -int subdev_8255_init(struct comedi_device *dev, struct comedi_subdevice *s, - int (*io)(struct comedi_device *dev, int dir, int port, - int data, unsigned long regbase), - unsigned long regbase); +#ifdef CONFIG_HAS_IOPORT +int subdev_8255_io_init(struct comedi_device *dev, struct comedi_subdevice *s, + unsigned long regbase); +#else +static inline int subdev_8255_io_init(struct comedi_device *dev, + struct comedi_subdevice *s, + unsigned long regbase) +{ + return -ENXIO; +} +#endif int subdev_8255_mm_init(struct comedi_device *dev, struct comedi_subdevice *s, - int (*io)(struct comedi_device *dev, int dir, int port, - int data, unsigned long regbase), unsigned long regbase); +int subdev_8255_cb_init(struct comedi_device *dev, struct comedi_subdevice *s, + int (*io)(struct comedi_device *dev, int dir, int port, + int data, unsigned long context), + unsigned long context); + unsigned long subdev_8255_regbase(struct comedi_subdevice *s); #endif diff --git a/include/linux/comedi/comedidev.h b/include/linux/comedi/comedidev.h index 0a1150900ef3..c08416a7364b 100644 --- a/include/linux/comedi/comedidev.h +++ b/include/linux/comedi/comedidev.h @@ -633,7 +633,7 @@ extern const struct comedi_lrange range_unknown; */ struct comedi_lrange { int length; - struct comedi_krange range[]; + struct comedi_krange range[] __counted_by(length); }; /** diff --git a/include/linux/hid-sensor-ids.h b/include/linux/hid-sensor-ids.h index 13b1e65fbdcc..6730ee900ee1 100644 --- a/include/linux/hid-sensor-ids.h +++ b/include/linux/hid-sensor-ids.h @@ -21,6 +21,10 @@ #define HID_USAGE_SENSOR_ALS 0x200041 #define HID_USAGE_SENSOR_DATA_LIGHT 0x2004d0 #define HID_USAGE_SENSOR_LIGHT_ILLUM 0x2004d1 +#define HID_USAGE_SENSOR_LIGHT_COLOR_TEMPERATURE 0x2004d2 +#define HID_USAGE_SENSOR_LIGHT_CHROMATICITY 0x2004d3 +#define HID_USAGE_SENSOR_LIGHT_CHROMATICITY_X 0x2004d4 +#define HID_USAGE_SENSOR_LIGHT_CHROMATICITY_Y 0x2004d5 /* PROX (200011) */ #define HID_USAGE_SENSOR_PROX 0x200011 diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index 202e55b0a28b..d0ce3b71106a 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -427,6 +427,8 @@ struct iio_trigger; /* forward declaration */ * @write_event_config: set if the event is enabled. * @read_event_value: read a configuration value associated with the event. * @write_event_value: write a configuration value for the event. + * @read_event_label: function to request label name for a specified label, + * for better event identification. * @validate_trigger: function to validate the trigger when the * current trigger gets changed. * @update_scan_mode: function to configure device and scan buffer when @@ -511,6 +513,12 @@ struct iio_info { enum iio_event_direction dir, enum iio_event_info info, int val, int val2); + int (*read_event_label)(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + enum iio_event_type type, + enum iio_event_direction dir, + char *label); + int (*validate_trigger)(struct iio_dev *indio_dev, struct iio_trigger *trig); int (*update_scan_mode)(struct iio_dev *indio_dev, @@ -556,7 +564,9 @@ struct iio_buffer_setup_ops { * and owner * @buffer: [DRIVER] any buffer present * @scan_bytes: [INTERN] num bytes captured to be fed to buffer demux - * @available_scan_masks: [DRIVER] optional array of allowed bitmasks + * @available_scan_masks: [DRIVER] optional array of allowed bitmasks. Sort the + * array in order of preference, the most preferred + * masks first. * @masklength: [INTERN] the length of the mask established from * channels * @active_scan_mask: [INTERN] union of all scan masks requested by buffers diff --git a/include/linux/iio/sw_device.h b/include/linux/iio/sw_device.h index eff1e6b2595c..0f7fe7b522e3 100644 --- a/include/linux/iio/sw_device.h +++ b/include/linux/iio/sw_device.h @@ -51,9 +51,6 @@ void iio_unregister_sw_device_type(struct iio_sw_device_type *dt); struct iio_sw_device *iio_sw_device_create(const char *, const char *); void iio_sw_device_destroy(struct iio_sw_device *); -int iio_sw_device_type_configfs_register(struct iio_sw_device_type *dt); -void iio_sw_device_type_configfs_unregister(struct iio_sw_device_type *dt); - static inline void iio_swd_group_init_type_name(struct iio_sw_device *d, const char *name, diff --git a/include/linux/iio/sw_trigger.h b/include/linux/iio/sw_trigger.h index 47de2443e984..bc77f88df303 100644 --- a/include/linux/iio/sw_trigger.h +++ b/include/linux/iio/sw_trigger.h @@ -51,9 +51,6 @@ void iio_unregister_sw_trigger_type(struct iio_sw_trigger_type *tt); struct iio_sw_trigger *iio_sw_trigger_create(const char *, const char *); void iio_sw_trigger_destroy(struct iio_sw_trigger *); -int iio_sw_trigger_type_configfs_register(struct iio_sw_trigger_type *tt); -void iio_sw_trigger_type_configfs_unregister(struct iio_sw_trigger_type *tt); - static inline void iio_swt_group_init_type_name(struct iio_sw_trigger *t, const char *name, diff --git a/include/linux/mei_cl_bus.h b/include/linux/mei_cl_bus.h index fd6e0620658d..b38a56a13f39 100644 --- a/include/linux/mei_cl_bus.h +++ b/include/linux/mei_cl_bus.h @@ -31,11 +31,11 @@ typedef void (*mei_cldev_cb_t)(struct mei_cl_device *cldev); * @rx_work: async work to execute Rx event callback * @rx_cb: Drivers register this callback to get asynchronous ME * Rx buffer pending notifications. - * @notif_work: async work to execute FW notif event callback + * @notif_work: async work to execute FW notify event callback * @notif_cb: Drivers register this callback to get asynchronous ME * FW notification pending notifications. * - * @do_match: wheather device can be matched with a driver + * @do_match: whether the device can be matched with a driver * @is_added: device is already scanned * @priv_data: client private data */ @@ -94,15 +94,23 @@ void mei_cldev_driver_unregister(struct mei_cl_driver *cldrv); ssize_t mei_cldev_send(struct mei_cl_device *cldev, const u8 *buf, size_t length); +ssize_t mei_cldev_send_timeout(struct mei_cl_device *cldev, const u8 *buf, + size_t length, unsigned long timeout); ssize_t mei_cldev_recv(struct mei_cl_device *cldev, u8 *buf, size_t length); ssize_t mei_cldev_recv_nonblock(struct mei_cl_device *cldev, u8 *buf, size_t length); +ssize_t mei_cldev_recv_timeout(struct mei_cl_device *cldev, u8 *buf, size_t length, + unsigned long timeout); ssize_t mei_cldev_send_vtag(struct mei_cl_device *cldev, const u8 *buf, size_t length, u8 vtag); +ssize_t mei_cldev_send_vtag_timeout(struct mei_cl_device *cldev, const u8 *buf, + size_t length, u8 vtag, unsigned long timeout); ssize_t mei_cldev_recv_vtag(struct mei_cl_device *cldev, u8 *buf, size_t length, u8 *vtag); ssize_t mei_cldev_recv_nonblock_vtag(struct mei_cl_device *cldev, u8 *buf, size_t length, u8 *vtag); +ssize_t mei_cldev_recv_vtag_timeout(struct mei_cl_device *cldev, u8 *buf, size_t length, + u8 *vtag, unsigned long timeout); int mei_cldev_register_rx_cb(struct mei_cl_device *cldev, mei_cldev_cb_t rx_cb); int mei_cldev_register_notif_cb(struct mei_cl_device *cldev, diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index b0678b093cb2..aa3c28781248 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -935,6 +935,12 @@ enum { * struct cdx_device_id - CDX device identifier * @vendor: Vendor ID * @device: Device ID + * @subvendor: Subsystem vendor ID (or CDX_ANY_ID) + * @subdevice: Subsystem device ID (or CDX_ANY_ID) + * @class: Device class + * Most drivers do not need to specify class/class_mask + * as vendor/device is normally sufficient. + * @class_mask: Limit which sub-fields of the class field are compared. * @override_only: Match only when dev->driver_override is this driver. * * Type of entries in the "device Id" table for CDX devices supported by @@ -943,6 +949,10 @@ enum { struct cdx_device_id { __u16 vendor; __u16 device; + __u16 subvendor; + __u16 subdevice; + __u32 class; + __u32 class_mask; __u32 override_only; }; diff --git a/include/linux/nvmem-provider.h b/include/linux/nvmem-provider.h index dae26295e6be..e3930835235b 100644 --- a/include/linux/nvmem-provider.h +++ b/include/linux/nvmem-provider.h @@ -82,13 +82,13 @@ struct nvmem_cell_info { * @owner: Pointer to exporter module. Used for refcounting. * @cells: Optional array of pre-defined NVMEM cells. * @ncells: Number of elements in cells. + * @add_legacy_fixed_of_cells: Read fixed NVMEM cells from old OF syntax. * @keepout: Optional array of keepout ranges (sorted ascending by start). * @nkeepout: Number of elements in the keepout array. * @type: Type of the nvmem storage * @read_only: Device is read-only. * @root_only: Device is accessibly to root only. * @of_node: If given, this will be used instead of the parent's of_node. - * @no_of_node: Device should not use the parent's of_node even if it's !NULL. * @reg_read: Callback to read data. * @reg_write: Callback to write data. * @size: Device size. @@ -112,6 +112,7 @@ struct nvmem_config { struct module *owner; const struct nvmem_cell_info *cells; int ncells; + bool add_legacy_fixed_of_cells; const struct nvmem_keepout *keepout; unsigned int nkeepout; enum nvmem_type type; @@ -120,7 +121,6 @@ struct nvmem_config { bool ignore_wp; struct nvmem_layout *layout; struct device_node *of_node; - bool no_of_node; nvmem_reg_read_t reg_read; nvmem_reg_write_t reg_write; int size; diff --git a/include/linux/parport.h b/include/linux/parport.h index 999eddd619b7..fff39bc30629 100644 --- a/include/linux/parport.h +++ b/include/linux/parport.h @@ -180,8 +180,6 @@ struct ieee1284_info { struct semaphore irq; }; -#define PARPORT_NAME_MAX_LEN 15 - /* A parallel port */ struct parport { unsigned long base; /* base address */ diff --git a/include/uapi/linux/counter.h b/include/uapi/linux/counter.h index fc248ef00e86..008a691c254b 100644 --- a/include/uapi/linux/counter.h +++ b/include/uapi/linux/counter.h @@ -38,7 +38,7 @@ enum counter_scope { * * For example, if the Count 2 ceiling extension of Counter device 4 is desired, * set type equal to COUNTER_COMPONENT_EXTENSION, scope equal to - * COUNTER_COUNT_SCOPE, parent equal to 2, and id equal to the value provided by + * COUNTER_SCOPE_COUNT, parent equal to 2, and id equal to the value provided by * the respective /sys/bus/counter/devices/counter4/count2/ceiling_component_id * sysfs attribute. */ diff --git a/include/uapi/linux/iio/types.h b/include/uapi/linux/iio/types.h index c79f2f046a0b..9c2ffdcd6623 100644 --- a/include/uapi/linux/iio/types.h +++ b/include/uapi/linux/iio/types.h @@ -47,6 +47,10 @@ enum iio_chan_type { IIO_POSITIONRELATIVE, IIO_PHASE, IIO_MASSCONCENTRATION, + IIO_DELTA_ANGL, + IIO_DELTA_VELOCITY, + IIO_COLORTEMP, + IIO_CHROMATICITY, }; enum iio_modifier { diff --git a/include/uapi/linux/mei.h b/include/uapi/linux/mei.h index 6e57743628c0..171c5cce3641 100644 --- a/include/uapi/linux/mei.h +++ b/include/uapi/linux/mei.h @@ -14,8 +14,8 @@ * FW Client (given by UUID). This opens a communication channel * between a host client and a FW client. From this point every read and write * will communicate with the associated FW client. - * Only in close() (file_operation release()) the communication between - * the clients is disconnected + * Only in close() (file_operation release()) is the communication between + * the clients disconnected. * * The IOCTL argument is a struct with a union that contains * the input parameter and the output parameter for this IOCTL. @@ -51,7 +51,7 @@ struct mei_connect_client_data { * DOC: set and unset event notification for a connected client * * The IOCTL argument is 1 for enabling event notification and 0 for - * disabling the service + * disabling the service. * Return: -EOPNOTSUPP if the devices doesn't support the feature */ #define IOCTL_MEI_NOTIFY_SET _IOW('H', 0x02, __u32) @@ -59,8 +59,8 @@ struct mei_connect_client_data { /** * DOC: retrieve notification * - * The IOCTL output argument is 1 if an event was is pending and 0 otherwise - * the ioctl has to be called in order to acknowledge pending event + * The IOCTL output argument is 1 if an event was pending and 0 otherwise. + * The ioctl has to be called in order to acknowledge pending event. * * Return: -EOPNOTSUPP if the devices doesn't support the feature */ @@ -98,14 +98,14 @@ struct mei_connect_client_data_vtag { * FW Client (given by UUID), and virtual tag (vtag). * The IOCTL opens a communication channel between a host client and * a FW client on a tagged channel. From this point on, every read - * and write will communicate with the associated FW client with + * and write will communicate with the associated FW client * on the tagged channel. * Upone close() the communication is terminated. * * The IOCTL argument is a struct with a union that contains * the input parameter and the output parameter for this IOCTL. * - * The input parameter is UUID of the FW Client, a vtag [0,255] + * The input parameter is UUID of the FW Client, a vtag [0,255]. * The output parameter is the properties of the FW client * (FW protocool version and max message size). * diff --git a/scripts/mod/devicetable-offsets.c b/scripts/mod/devicetable-offsets.c index abe65f8968dd..7a659aa3114a 100644 --- a/scripts/mod/devicetable-offsets.c +++ b/scripts/mod/devicetable-offsets.c @@ -265,6 +265,10 @@ int main(void) DEVID(cdx_device_id); DEVID_FIELD(cdx_device_id, vendor); DEVID_FIELD(cdx_device_id, device); + DEVID_FIELD(cdx_device_id, subvendor); + DEVID_FIELD(cdx_device_id, subdevice); + DEVID_FIELD(cdx_device_id, class); + DEVID_FIELD(cdx_device_id, class_mask); DEVID_FIELD(cdx_device_id, override_only); return 0; diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c index 7056751c29b1..2b28faca9585 100644 --- a/scripts/mod/file2alias.c +++ b/scripts/mod/file2alias.c @@ -1458,6 +1458,10 @@ static int do_cdx_entry(const char *filename, void *symval, { DEF_FIELD(symval, cdx_device_id, vendor); DEF_FIELD(symval, cdx_device_id, device); + DEF_FIELD(symval, cdx_device_id, subvendor); + DEF_FIELD(symval, cdx_device_id, subdevice); + DEF_FIELD(symval, cdx_device_id, class); + DEF_FIELD(symval, cdx_device_id, class_mask); DEF_FIELD(symval, cdx_device_id, override_only); switch (override_only) { @@ -1475,6 +1479,10 @@ static int do_cdx_entry(const char *filename, void *symval, ADD(alias, "v", vendor != CDX_ANY_ID, vendor); ADD(alias, "d", device != CDX_ANY_ID, device); + ADD(alias, "sv", subvendor != CDX_ANY_ID, subvendor); + ADD(alias, "sd", subdevice != CDX_ANY_ID, subdevice); + ADD(alias, "c", class_mask == 0xFFFFFF, class); + return 1; } diff --git a/tools/iio/iio_event_monitor.c b/tools/iio/iio_event_monitor.c index 0a5c2bb60030..2eaaa7123b04 100644 --- a/tools/iio/iio_event_monitor.c +++ b/tools/iio/iio_event_monitor.c @@ -59,6 +59,10 @@ static const char * const iio_chan_type_name_spec[] = { [IIO_POSITIONRELATIVE] = "positionrelative", [IIO_PHASE] = "phase", [IIO_MASSCONCENTRATION] = "massconcentration", + [IIO_DELTA_ANGL] = "deltaangl", + [IIO_DELTA_VELOCITY] = "deltavelocity", + [IIO_COLORTEMP] = "colortemp", + [IIO_CHROMATICITY] = "chromaticity", }; static const char * const iio_ev_type_text[] = { @@ -173,6 +177,10 @@ static bool event_is_known(struct iio_event_data *event) case IIO_POSITIONRELATIVE: case IIO_PHASE: case IIO_MASSCONCENTRATION: + case IIO_DELTA_ANGL: + case IIO_DELTA_VELOCITY: + case IIO_COLORTEMP: + case IIO_CHROMATICITY: break; default: return false; diff --git a/tools/iio/iio_generic_buffer.c b/tools/iio/iio_generic_buffer.c index 44bbf80f0cfd..0d0a7a19d6f9 100644 --- a/tools/iio/iio_generic_buffer.c +++ b/tools/iio/iio_generic_buffer.c @@ -54,9 +54,12 @@ enum autochan { static unsigned int size_from_channelarray(struct iio_channel_info *channels, int num_channels) { unsigned int bytes = 0; - int i = 0; + int i = 0, max = 0; + unsigned int misalignment; while (i < num_channels) { + if (channels[i].bytes > max) + max = channels[i].bytes; if (bytes % channels[i].bytes == 0) channels[i].location = bytes; else @@ -66,6 +69,14 @@ static unsigned int size_from_channelarray(struct iio_channel_info *channels, in bytes = channels[i].location + channels[i].bytes; i++; } + /* + * We want the data in next sample to also be properly aligned so + * we'll add padding at the end if needed. Adding padding only + * works for channel data which size is 2^n bytes. + */ + misalignment = bytes % max; + if (misalignment) + bytes += max - misalignment; return bytes; } |