summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/opp/opp.txt132
-rw-r--r--arch/arm/boot/dts/exynos4412.dtsi28
-rw-r--r--drivers/base/power/opp/Makefile1
-rw-r--r--drivers/base/power/opp/core.c336
-rw-r--r--drivers/base/power/opp/cpu.c3
-rw-r--r--drivers/base/power/opp/debugfs.c219
-rw-r--r--drivers/base/power/opp/opp.h53
-rw-r--r--include/linux/pm_opp.h22
8 files changed, 722 insertions, 72 deletions
diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
index 0cb44dc21f97..601256fe8c0d 100644
--- a/Documentation/devicetree/bindings/opp/opp.txt
+++ b/Documentation/devicetree/bindings/opp/opp.txt
@@ -45,21 +45,10 @@ Devices supporting OPPs must set their "operating-points-v2" property with
phandle to a OPP table in their DT node. The OPP core will use this phandle to
find the operating points for the device.
-Devices may want to choose OPP tables at runtime and so can provide a list of
-phandles here. But only *one* of them should be chosen at runtime. This must be
-accompanied by a corresponding "operating-points-names" property, to uniquely
-identify the OPP tables.
-
If required, this can be extended for SoC vendor specfic bindings. Such bindings
should be documented as Documentation/devicetree/bindings/power/<vendor>-opp.txt
and should have a compatible description like: "operating-points-v2-<vendor>".
-Optional properties:
-- operating-points-names: Names of OPP tables (required if multiple OPP
- tables are present), to uniquely identify them. The same list must be present
- for all the CPUs which are sharing clock/voltage rails and hence the OPP
- tables.
-
* OPP Table Node
This describes the OPPs belonging to a device. This node can have following
@@ -100,6 +89,14 @@ Optional properties:
Entries for multiple regulators must be present in the same order as
regulators are specified in device's DT node.
+- opp-microvolt-<name>: Named opp-microvolt property. This is exactly similar to
+ the above opp-microvolt property, but allows multiple voltage ranges to be
+ provided for the same OPP. At runtime, the platform can pick a <name> and
+ matching opp-microvolt-<name> property will be enabled for all OPPs. If the
+ platform doesn't pick a specific <name> or the <name> doesn't match with any
+ opp-microvolt-<name> properties, then opp-microvolt property shall be used, if
+ present.
+
- opp-microamp: The maximum current drawn by the device in microamperes
considering system specific parameters (such as transients, process, aging,
maximum operating temperature range etc.) as necessary. This may be used to
@@ -112,6 +109,9 @@ Optional properties:
for few regulators, then this should be marked as zero for them. If it isn't
required for any regulator, then this property need not be present.
+- opp-microamp-<name>: Named opp-microamp property. Similar to
+ opp-microvolt-<name> property, but for microamp instead.
+
- clock-latency-ns: Specifies the maximum possible transition latency (in
nanoseconds) for switching to this OPP from any other OPP.
@@ -123,6 +123,26 @@ Optional properties:
- opp-suspend: Marks the OPP to be used during device suspend. Only one OPP in
the table should have this.
+- opp-supported-hw: This enables us to select only a subset of OPPs from the
+ larger OPP table, based on what version of the hardware we are running on. We
+ still can't have multiple nodes with the same opp-hz value in OPP table.
+
+ It's an user defined array containing a hierarchy of hardware version numbers,
+ supported by the OPP. For example: a platform with hierarchy of three levels
+ of versions (A, B and C), this field should be like <X Y Z>, where X
+ corresponds to Version hierarchy A, Y corresponds to version hierarchy B and Z
+ corresponds to version hierarchy C.
+
+ Each level of hierarchy is represented by a 32 bit value, and so there can be
+ only 32 different supported version per hierarchy. i.e. 1 bit per version. A
+ value of 0xFFFFFFFF will enable the OPP for all versions for that hierarchy
+ level. And a value of 0x00000000 will disable the OPP completely, and so we
+ never want that to happen.
+
+ If 32 values aren't sufficient for a version hierarchy, than that version
+ hierarchy can be contained in multiple 32 bit values. i.e. <X Y Z1 Z2> in the
+ above example, Z1 & Z2 refer to the version hierarchy Z.
+
- status: Marks the node enabled/disabled.
Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together.
@@ -157,20 +177,20 @@ Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together.
compatible = "operating-points-v2";
opp-shared;
- opp00 {
+ opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>;
opp-microamp = <70000>;
clock-latency-ns = <300000>;
opp-suspend;
};
- opp01 {
+ opp@1100000000 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <980000 1000000 1010000>;
opp-microamp = <80000>;
clock-latency-ns = <310000>;
};
- opp02 {
+ opp@1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1025000>;
clock-latency-ns = <290000>;
@@ -236,20 +256,20 @@ independently.
* independently.
*/
- opp00 {
+ opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>;
opp-microamp = <70000>;
clock-latency-ns = <300000>;
opp-suspend;
};
- opp01 {
+ opp@1100000000 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <980000 1000000 1010000>;
opp-microamp = <80000>;
clock-latency-ns = <310000>;
};
- opp02 {
+ opp@1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1025000>;
opp-microamp = <90000;
@@ -312,20 +332,20 @@ DVFS state together.
compatible = "operating-points-v2";
opp-shared;
- opp00 {
+ opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>;
opp-microamp = <70000>;
clock-latency-ns = <300000>;
opp-suspend;
};
- opp01 {
+ opp@1100000000 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <980000 1000000 1010000>;
opp-microamp = <80000>;
clock-latency-ns = <310000>;
};
- opp02 {
+ opp@1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1025000>;
opp-microamp = <90000>;
@@ -338,20 +358,20 @@ DVFS state together.
compatible = "operating-points-v2";
opp-shared;
- opp10 {
+ opp@1300000000 {
opp-hz = /bits/ 64 <1300000000>;
opp-microvolt = <1045000 1050000 1055000>;
opp-microamp = <95000>;
clock-latency-ns = <400000>;
opp-suspend;
};
- opp11 {
+ opp@1400000000 {
opp-hz = /bits/ 64 <1400000000>;
opp-microvolt = <1075000>;
opp-microamp = <100000>;
clock-latency-ns = <400000>;
};
- opp12 {
+ opp@1500000000 {
opp-hz = /bits/ 64 <1500000000>;
opp-microvolt = <1010000 1100000 1110000>;
opp-microamp = <95000>;
@@ -378,7 +398,7 @@ Example 4: Handling multiple regulators
compatible = "operating-points-v2";
opp-shared;
- opp00 {
+ opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000>, /* Supply 0 */
<960000>, /* Supply 1 */
@@ -391,7 +411,7 @@ Example 4: Handling multiple regulators
/* OR */
- opp00 {
+ opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>, /* Supply 0 */
<960000 965000 975000>, /* Supply 1 */
@@ -404,7 +424,7 @@ Example 4: Handling multiple regulators
/* OR */
- opp00 {
+ opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>, /* Supply 0 */
<960000 965000 975000>, /* Supply 1 */
@@ -417,7 +437,8 @@ Example 4: Handling multiple regulators
};
};
-Example 5: Multiple OPP tables
+Example 5: opp-supported-hw
+(example: three level hierarchy of versions: cuts, substrate and process)
/ {
cpus {
@@ -426,40 +447,73 @@ Example 5: Multiple OPP tables
...
cpu-supply = <&cpu_supply>
- operating-points-v2 = <&cpu0_opp_table_slow>, <&cpu0_opp_table_fast>;
- operating-points-names = "slow", "fast";
+ operating-points-v2 = <&cpu0_opp_table_slow>;
};
};
- cpu0_opp_table_slow: opp_table_slow {
+ opp_table {
compatible = "operating-points-v2";
status = "okay";
opp-shared;
- opp00 {
+ opp@600000000 {
+ /*
+ * Supports all substrate and process versions for 0xF
+ * cuts, i.e. only first four cuts.
+ */
+ opp-supported-hw = <0xF 0xFFFFFFFF 0xFFFFFFFF>
opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <900000 915000 925000>;
...
};
- opp01 {
+ opp@800000000 {
+ /*
+ * Supports:
+ * - cuts: only one, 6th cut (represented by 6th bit).
+ * - substrate: supports 16 different substrate versions
+ * - process: supports 9 different process versions
+ */
+ opp-supported-hw = <0x20 0xff0000ff 0x0000f4f0>
opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <900000 915000 925000>;
...
};
};
+};
+
+Example 6: opp-microvolt-<name>, opp-microamp-<name>:
+(example: device with two possible microvolt ranges: slow and fast)
- cpu0_opp_table_fast: opp_table_fast {
+/ {
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-a7";
+ ...
+
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+ };
+
+ cpu0_opp_table: opp_table0 {
compatible = "operating-points-v2";
- status = "okay";
opp-shared;
- opp10 {
+ opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
- ...
+ opp-microvolt-slow = <900000 915000 925000>;
+ opp-microvolt-fast = <970000 975000 985000>;
+ opp-microamp-slow = <70000>;
+ opp-microamp-fast = <71000>;
};
- opp11 {
- opp-hz = /bits/ 64 <1100000000>;
- ...
+ opp@1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt-slow = <900000 915000 925000>, /* Supply vcc0 */
+ <910000 925000 935000>; /* Supply vcc1 */
+ opp-microvolt-fast = <970000 975000 985000>, /* Supply vcc0 */
+ <960000 965000 975000>; /* Supply vcc1 */
+ opp-microamp = <70000>; /* Will be used for both slow/fast */
};
};
};
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index 294cfe40388d..40beede46e55 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -64,73 +64,73 @@
compatible = "operating-points-v2";
opp-shared;
- opp00 {
+ opp@200000000 {
opp-hz = /bits/ 64 <200000000>;
opp-microvolt = <900000>;
clock-latency-ns = <200000>;
};
- opp01 {
+ opp@300000000 {
opp-hz = /bits/ 64 <300000000>;
opp-microvolt = <900000>;
clock-latency-ns = <200000>;
};
- opp02 {
+ opp@400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <925000>;
clock-latency-ns = <200000>;
};
- opp03 {
+ opp@500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <950000>;
clock-latency-ns = <200000>;
};
- opp04 {
+ opp@600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <975000>;
clock-latency-ns = <200000>;
};
- opp05 {
+ opp@700000000 {
opp-hz = /bits/ 64 <700000000>;
opp-microvolt = <987500>;
clock-latency-ns = <200000>;
};
- opp06 {
+ opp@800000000 {
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = <1000000>;
clock-latency-ns = <200000>;
opp-suspend;
};
- opp07 {
+ opp@900000000 {
opp-hz = /bits/ 64 <900000000>;
opp-microvolt = <1037500>;
clock-latency-ns = <200000>;
};
- opp08 {
+ opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <1087500>;
clock-latency-ns = <200000>;
};
- opp09 {
+ opp@1100000000 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <1137500>;
clock-latency-ns = <200000>;
};
- opp10 {
+ opp@1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1187500>;
clock-latency-ns = <200000>;
};
- opp11 {
+ opp@1300000000 {
opp-hz = /bits/ 64 <1300000000>;
opp-microvolt = <1250000>;
clock-latency-ns = <200000>;
};
- opp12 {
+ opp@1400000000 {
opp-hz = /bits/ 64 <1400000000>;
opp-microvolt = <1287500>;
clock-latency-ns = <200000>;
};
- opp13 {
+ opp@1500000000 {
opp-hz = /bits/ 64 <1500000000>;
opp-microvolt = <1350000>;
clock-latency-ns = <200000>;
diff --git a/drivers/base/power/opp/Makefile b/drivers/base/power/opp/Makefile
index 33c1e18c41a4..19837ef04d8e 100644
--- a/drivers/base/power/opp/Makefile
+++ b/drivers/base/power/opp/Makefile
@@ -1,2 +1,3 @@
ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG
obj-y += core.o cpu.o
+obj-$(CONFIG_DEBUG_FS) += debugfs.o
diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index b8e76f75073b..cf351d3dab1c 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -463,6 +463,7 @@ static void _kfree_list_dev_rcu(struct rcu_head *head)
static void _remove_list_dev(struct device_list_opp *list_dev,
struct device_opp *dev_opp)
{
+ opp_debug_unregister(list_dev, dev_opp);
list_del(&list_dev->node);
call_srcu(&dev_opp->srcu_head.srcu, &list_dev->rcu_head,
_kfree_list_dev_rcu);
@@ -472,6 +473,7 @@ struct device_list_opp *_add_list_dev(const struct device *dev,
struct device_opp *dev_opp)
{
struct device_list_opp *list_dev;
+ int ret;
list_dev = kzalloc(sizeof(*list_dev), GFP_KERNEL);
if (!list_dev)
@@ -481,6 +483,12 @@ struct device_list_opp *_add_list_dev(const struct device *dev,
list_dev->dev = dev;
list_add_rcu(&list_dev->node, &dev_opp->dev_list);
+ /* Create debugfs entries for the dev_opp */
+ ret = opp_debug_register(list_dev, dev_opp);
+ if (ret)
+ dev_err(dev, "%s: Failed to register opp debugfs (%d)\n",
+ __func__, ret);
+
return list_dev;
}
@@ -551,6 +559,12 @@ static void _remove_device_opp(struct device_opp *dev_opp)
if (!list_empty(&dev_opp->opp_list))
return;
+ if (dev_opp->supported_hw)
+ return;
+
+ if (dev_opp->prop_name)
+ return;
+
list_dev = list_first_entry(&dev_opp->dev_list, struct device_list_opp,
node);
@@ -596,6 +610,7 @@ static void _opp_remove(struct device_opp *dev_opp,
*/
if (notify)
srcu_notifier_call_chain(&dev_opp->srcu_head, OPP_EVENT_REMOVE, opp);
+ opp_debug_remove_one(opp);
list_del_rcu(&opp->node);
call_srcu(&dev_opp->srcu_head.srcu, &opp->rcu_head, _kfree_opp_rcu);
@@ -673,6 +688,7 @@ static int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
{
struct dev_pm_opp *opp;
struct list_head *head = &dev_opp->opp_list;
+ int ret;
/*
* Insert new OPP in order of increasing frequency and discard if
@@ -703,6 +719,11 @@ static int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
new_opp->dev_opp = dev_opp;
list_add_rcu(&new_opp->node, head);
+ ret = opp_debug_create_one(new_opp, dev_opp);
+ if (ret)
+ dev_err(dev, "%s: Failed to register opp to debugfs (%d)\n",
+ __func__, ret);
+
return 0;
}
@@ -776,35 +797,49 @@ unlock:
}
/* TODO: Support multiple regulators */
-static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev)
+static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev,
+ struct device_opp *dev_opp)
{
u32 microvolt[3] = {0};
u32 val;
int count, ret;
+ struct property *prop = NULL;
+ char name[NAME_MAX];
+
+ /* Search for "opp-microvolt-<name>" */
+ if (dev_opp->prop_name) {
+ snprintf(name, sizeof(name), "opp-microvolt-%s",
+ dev_opp->prop_name);
+ prop = of_find_property(opp->np, name, NULL);
+ }
- /* Missing property isn't a problem, but an invalid entry is */
- if (!of_find_property(opp->np, "opp-microvolt", NULL))
- return 0;
+ if (!prop) {
+ /* Search for "opp-microvolt" */
+ sprintf(name, "opp-microvolt");
+ prop = of_find_property(opp->np, name, NULL);
- count = of_property_count_u32_elems(opp->np, "opp-microvolt");
+ /* Missing property isn't a problem, but an invalid entry is */
+ if (!prop)
+ return 0;
+ }
+
+ count = of_property_count_u32_elems(opp->np, name);
if (count < 0) {
- dev_err(dev, "%s: Invalid opp-microvolt property (%d)\n",
- __func__, count);
+ dev_err(dev, "%s: Invalid %s property (%d)\n",
+ __func__, name, count);
return count;
}
/* There can be one or three elements here */
if (count != 1 && count != 3) {
- dev_err(dev, "%s: Invalid number of elements in opp-microvolt property (%d)\n",
- __func__, count);
+ dev_err(dev, "%s: Invalid number of elements in %s property (%d)\n",
+ __func__, name, count);
return -EINVAL;
}
- ret = of_property_read_u32_array(opp->np, "opp-microvolt", microvolt,
- count);
+ ret = of_property_read_u32_array(opp->np, name, microvolt, count);
if (ret) {
- dev_err(dev, "%s: error parsing opp-microvolt: %d\n", __func__,
- ret);
+ dev_err(dev, "%s: error parsing %s: %d\n", __func__, name, ret);
return -EINVAL;
}
@@ -812,13 +847,272 @@ static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev)
opp->u_volt_min = microvolt[1];
opp->u_volt_max = microvolt[2];
- if (!of_property_read_u32(opp->np, "opp-microamp", &val))
+ /* Search for "opp-microamp-<name>" */
+ prop = NULL;
+ if (dev_opp->prop_name) {
+ snprintf(name, sizeof(name), "opp-microamp-%s",
+ dev_opp->prop_name);
+ prop = of_find_property(opp->np, name, NULL);
+ }
+
+ if (!prop) {
+ /* Search for "opp-microamp" */
+ sprintf(name, "opp-microamp");
+ prop = of_find_property(opp->np, name, NULL);
+ }
+
+ if (prop && !of_property_read_u32(opp->np, name, &val))
opp->u_amp = val;
return 0;
}
/**
+ * dev_pm_opp_set_supported_hw() - Set supported platforms
+ * @dev: Device for which supported-hw has to be set.
+ * @versions: Array of hierarchy of versions to match.
+ * @count: Number of elements in the array.
+ *
+ * This is required only for the V2 bindings, and it enables a platform to
+ * specify the hierarchy of versions it supports. OPP layer will then enable
+ * OPPs, which are available for those versions, based on its 'opp-supported-hw'
+ * property.
+ *
+ * Locking: The internal device_opp and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+int dev_pm_opp_set_supported_hw(struct device *dev, const u32 *versions,
+ unsigned int count)
+{
+ struct device_opp *dev_opp;
+ int ret = 0;
+
+ /* Hold our list modification lock here */
+ mutex_lock(&dev_opp_list_lock);
+
+ dev_opp = _add_device_opp(dev);
+ if (!dev_opp) {
+ ret = -ENOMEM;
+ goto unlock;
+ }
+
+ /* Make sure there are no concurrent readers while updating dev_opp */
+ WARN_ON(!list_empty(&dev_opp->opp_list));
+
+ /* Do we already have a version hierarchy associated with dev_opp? */
+ if (dev_opp->supported_hw) {
+ dev_err(dev, "%s: Already have supported hardware list\n",
+ __func__);
+ ret = -EBUSY;
+ goto err;
+ }
+
+ dev_opp->supported_hw = kmemdup(versions, count * sizeof(*versions),
+ GFP_KERNEL);
+ if (!dev_opp->supported_hw) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ dev_opp->supported_hw_count = count;
+ mutex_unlock(&dev_opp_list_lock);
+ return 0;
+
+err:
+ _remove_device_opp(dev_opp);
+unlock:
+ mutex_unlock(&dev_opp_list_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_set_supported_hw);
+
+/**
+ * dev_pm_opp_put_supported_hw() - Releases resources blocked for supported hw
+ * @dev: Device for which supported-hw has to be set.
+ *
+ * This is required only for the V2 bindings, and is called for a matching
+ * dev_pm_opp_set_supported_hw(). Until this is called, the device_opp structure
+ * will not be freed.
+ *
+ * Locking: The internal device_opp and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+void dev_pm_opp_put_supported_hw(struct device *dev)
+{
+ struct device_opp *dev_opp;
+
+ /* Hold our list modification lock here */
+ mutex_lock(&dev_opp_list_lock);
+
+ /* Check for existing list for 'dev' first */
+ dev_opp = _find_device_opp(dev);
+ if (IS_ERR(dev_opp)) {
+ dev_err(dev, "Failed to find dev_opp: %ld\n", PTR_ERR(dev_opp));
+ goto unlock;
+ }
+
+ /* Make sure there are no concurrent readers while updating dev_opp */
+ WARN_ON(!list_empty(&dev_opp->opp_list));
+
+ if (!dev_opp->supported_hw) {
+ dev_err(dev, "%s: Doesn't have supported hardware list\n",
+ __func__);
+ goto unlock;
+ }
+
+ kfree(dev_opp->supported_hw);
+ dev_opp->supported_hw = NULL;
+ dev_opp->supported_hw_count = 0;
+
+ /* Try freeing device_opp if this was the last blocking resource */
+ _remove_device_opp(dev_opp);
+
+unlock:
+ mutex_unlock(&dev_opp_list_lock);
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_put_supported_hw);
+
+/**
+ * dev_pm_opp_set_prop_name() - Set prop-extn name
+ * @dev: Device for which the regulator has to be set.
+ * @name: name to postfix to properties.
+ *
+ * This is required only for the V2 bindings, and it enables a platform to
+ * specify the extn to be used for certain property names. The properties to
+ * which the extension will apply are opp-microvolt and opp-microamp. OPP core
+ * should postfix the property name with -<name> while looking for them.
+ *
+ * Locking: The internal device_opp and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+int dev_pm_opp_set_prop_name(struct device *dev, const char *name)
+{
+ struct device_opp *dev_opp;
+ int ret = 0;
+
+ /* Hold our list modification lock here */
+ mutex_lock(&dev_opp_list_lock);
+
+ dev_opp = _add_device_opp(dev);
+ if (!dev_opp) {
+ ret = -ENOMEM;
+ goto unlock;
+ }
+
+ /* Make sure there are no concurrent readers while updating dev_opp */
+ WARN_ON(!list_empty(&dev_opp->opp_list));
+
+ /* Do we already have a prop-name associated with dev_opp? */
+ if (dev_opp->prop_name) {
+ dev_err(dev, "%s: Already have prop-name %s\n", __func__,
+ dev_opp->prop_name);
+ ret = -EBUSY;
+ goto err;
+ }
+
+ dev_opp->prop_name = kstrdup(name, GFP_KERNEL);
+ if (!dev_opp->prop_name) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ mutex_unlock(&dev_opp_list_lock);
+ return 0;
+
+err:
+ _remove_device_opp(dev_opp);
+unlock:
+ mutex_unlock(&dev_opp_list_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_set_prop_name);
+
+/**
+ * dev_pm_opp_put_prop_name() - Releases resources blocked for prop-name
+ * @dev: Device for which the regulator has to be set.
+ *
+ * This is required only for the V2 bindings, and is called for a matching
+ * dev_pm_opp_set_prop_name(). Until this is called, the device_opp structure
+ * will not be freed.
+ *
+ * Locking: The internal device_opp and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+void dev_pm_opp_put_prop_name(struct device *dev)
+{
+ struct device_opp *dev_opp;
+
+ /* Hold our list modification lock here */
+ mutex_lock(&dev_opp_list_lock);
+
+ /* Check for existing list for 'dev' first */
+ dev_opp = _find_device_opp(dev);
+ if (IS_ERR(dev_opp)) {
+ dev_err(dev, "Failed to find dev_opp: %ld\n", PTR_ERR(dev_opp));
+ goto unlock;
+ }
+
+ /* Make sure there are no concurrent readers while updating dev_opp */
+ WARN_ON(!list_empty(&dev_opp->opp_list));
+
+ if (!dev_opp->prop_name) {
+ dev_err(dev, "%s: Doesn't have a prop-name\n", __func__);
+ goto unlock;
+ }
+
+ kfree(dev_opp->prop_name);
+ dev_opp->prop_name = NULL;
+
+ /* Try freeing device_opp if this was the last blocking resource */
+ _remove_device_opp(dev_opp);
+
+unlock:
+ mutex_unlock(&dev_opp_list_lock);
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_put_prop_name);
+
+static bool _opp_is_supported(struct device *dev, struct device_opp *dev_opp,
+ struct device_node *np)
+{
+ unsigned int count = dev_opp->supported_hw_count;
+ u32 version;
+ int ret;
+
+ if (!dev_opp->supported_hw)
+ return true;
+
+ while (count--) {
+ ret = of_property_read_u32_index(np, "opp-supported-hw", count,
+ &version);
+ if (ret) {
+ dev_warn(dev, "%s: failed to read opp-supported-hw property at index %d: %d\n",
+ __func__, count, ret);
+ return false;
+ }
+
+ /* Both of these are bitwise masks of the versions */
+ if (!(version & dev_opp->supported_hw[count]))
+ return false;
+ }
+
+ return true;
+}
+
+/**
* _opp_add_static_v2() - Allocate static OPPs (As per 'v2' DT bindings)
* @dev: device for which we do this operation
* @np: device node
@@ -864,6 +1158,12 @@ static int _opp_add_static_v2(struct device *dev, struct device_node *np)
goto free_opp;
}
+ /* Check if the OPP supports hardware's hierarchy of versions or not */
+ if (!_opp_is_supported(dev, dev_opp, np)) {
+ dev_dbg(dev, "OPP not supported by hardware: %llu\n", rate);
+ goto free_opp;
+ }
+
/*
* Rate is defined as an unsigned long in clk API, and so casting
* explicitly to its type. Must be fixed once rate is 64 bit
@@ -879,7 +1179,7 @@ static int _opp_add_static_v2(struct device *dev, struct device_node *np)
if (!of_property_read_u32(np, "clock-latency-ns", &val))
new_opp->clock_latency_ns = val;
- ret = opp_parse_supplies(new_opp, dev);
+ ret = opp_parse_supplies(new_opp, dev, dev_opp);
if (ret)
goto free_opp;
@@ -889,12 +1189,14 @@ static int _opp_add_static_v2(struct device *dev, struct device_node *np)
/* OPP to select on device suspend */
if (of_property_read_bool(np, "opp-suspend")) {
- if (dev_opp->suspend_opp)
+ if (dev_opp->suspend_opp) {
dev_warn(dev, "%s: Multiple suspend OPPs found (%lu %lu)\n",
__func__, dev_opp->suspend_opp->rate,
new_opp->rate);
- else
+ } else {
+ new_opp->suspend = true;
dev_opp->suspend_opp = new_opp;
+ }
}
if (new_opp->clock_latency_ns > dev_opp->clock_latency_ns_max)
diff --git a/drivers/base/power/opp/cpu.c b/drivers/base/power/opp/cpu.c
index 7b445e88a0d5..9f0c15570f64 100644
--- a/drivers/base/power/opp/cpu.c
+++ b/drivers/base/power/opp/cpu.c
@@ -214,7 +214,6 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_add_table);
/*
* Works only for OPP v2 bindings.
*
- * cpumask should be already set to mask of cpu_dev->id.
* Returns -ENOENT if operating-points-v2 bindings aren't supported.
*/
int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
@@ -230,6 +229,8 @@ int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask
return -ENOENT;
}
+ cpumask_set_cpu(cpu_dev->id, cpumask);
+
/* OPPs are shared ? */
if (!of_property_read_bool(np, "opp-shared"))
goto put_cpu_node;
diff --git a/drivers/base/power/opp/debugfs.c b/drivers/base/power/opp/debugfs.c
new file mode 100644
index 000000000000..ddfe4773e922
--- /dev/null
+++ b/drivers/base/power/opp/debugfs.c
@@ -0,0 +1,219 @@
+/*
+ * Generic OPP debugfs interface
+ *
+ * Copyright (C) 2015-2016 Viresh Kumar <viresh.kumar@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/limits.h>
+
+#include "opp.h"
+
+static struct dentry *rootdir;
+
+static void opp_set_dev_name(const struct device *dev, char *name)
+{
+ if (dev->parent)
+ snprintf(name, NAME_MAX, "%s-%s", dev_name(dev->parent),
+ dev_name(dev));
+ else
+ snprintf(name, NAME_MAX, "%s", dev_name(dev));
+}
+
+void opp_debug_remove_one(struct dev_pm_opp *opp)
+{
+ debugfs_remove_recursive(opp->dentry);
+}
+
+int opp_debug_create_one(struct dev_pm_opp *opp, struct device_opp *dev_opp)
+{
+ struct dentry *pdentry = dev_opp->dentry;
+ struct dentry *d;
+ char name[25]; /* 20 chars for 64 bit value + 5 (opp:\0) */
+
+ /* Rate is unique to each OPP, use it to give opp-name */
+ snprintf(name, sizeof(name), "opp:%lu", opp->rate);
+
+ /* Create per-opp directory */
+ d = debugfs_create_dir(name, pdentry);
+ if (!d)
+ return -ENOMEM;
+
+ if (!debugfs_create_bool("available", S_IRUGO, d, &opp->available))
+ return -ENOMEM;
+
+ if (!debugfs_create_bool("dynamic", S_IRUGO, d, &opp->dynamic))
+ return -ENOMEM;
+
+ if (!debugfs_create_bool("turbo", S_IRUGO, d, &opp->turbo))
+ return -ENOMEM;
+
+ if (!debugfs_create_bool("suspend", S_IRUGO, d, &opp->suspend))
+ return -ENOMEM;
+
+ if (!debugfs_create_ulong("rate_hz", S_IRUGO, d, &opp->rate))
+ return -ENOMEM;
+
+ if (!debugfs_create_ulong("u_volt_target", S_IRUGO, d, &opp->u_volt))
+ return -ENOMEM;
+
+ if (!debugfs_create_ulong("u_volt_min", S_IRUGO, d, &opp->u_volt_min))
+ return -ENOMEM;
+
+ if (!debugfs_create_ulong("u_volt_max", S_IRUGO, d, &opp->u_volt_max))
+ return -ENOMEM;
+
+ if (!debugfs_create_ulong("u_amp", S_IRUGO, d, &opp->u_amp))
+ return -ENOMEM;
+
+ if (!debugfs_create_ulong("clock_latency_ns", S_IRUGO, d,
+ &opp->clock_latency_ns))
+ return -ENOMEM;
+
+ opp->dentry = d;
+ return 0;
+}
+
+static int device_opp_debug_create_dir(struct device_list_opp *list_dev,
+ struct device_opp *dev_opp)
+{
+ const struct device *dev = list_dev->dev;
+ struct dentry *d;
+
+ opp_set_dev_name(dev, dev_opp->dentry_name);
+
+ /* Create device specific directory */
+ d = debugfs_create_dir(dev_opp->dentry_name, rootdir);
+ if (!d) {
+ dev_err(dev, "%s: Failed to create debugfs dir\n", __func__);
+ return -ENOMEM;
+ }
+
+ list_dev->dentry = d;
+ dev_opp->dentry = d;
+
+ return 0;
+}
+
+static int device_opp_debug_create_link(struct device_list_opp *list_dev,
+ struct device_opp *dev_opp)
+{
+ const struct device *dev = list_dev->dev;
+ char name[NAME_MAX];
+ struct dentry *d;
+
+ opp_set_dev_name(list_dev->dev, name);
+
+ /* Create device specific directory link */
+ d = debugfs_create_symlink(name, rootdir, dev_opp->dentry_name);
+ if (!d) {
+ dev_err(dev, "%s: Failed to create link\n", __func__);
+ return -ENOMEM;
+ }
+
+ list_dev->dentry = d;
+
+ return 0;
+}
+
+/**
+ * opp_debug_register - add a device opp node to the debugfs 'opp' directory
+ * @list_dev: list-dev pointer for device
+ * @dev_opp: the device-opp being added
+ *
+ * Dynamically adds device specific directory in debugfs 'opp' directory. If the
+ * device-opp is shared with other devices, then links will be created for all
+ * devices except the first.
+ *
+ * Return: 0 on success, otherwise negative error.
+ */
+int opp_debug_register(struct device_list_opp *list_dev,
+ struct device_opp *dev_opp)
+{
+ if (!rootdir) {
+ pr_debug("%s: Uninitialized rootdir\n", __func__);
+ return -EINVAL;
+ }
+
+ if (dev_opp->dentry)
+ return device_opp_debug_create_link(list_dev, dev_opp);
+
+ return device_opp_debug_create_dir(list_dev, dev_opp);
+}
+
+static void opp_migrate_dentry(struct device_list_opp *list_dev,
+ struct device_opp *dev_opp)
+{
+ struct device_list_opp *new_dev;
+ const struct device *dev;
+ struct dentry *dentry;
+
+ /* Look for next list-dev */
+ list_for_each_entry(new_dev, &dev_opp->dev_list, node)
+ if (new_dev != list_dev)
+ break;
+
+ /* new_dev is guaranteed to be valid here */
+ dev = new_dev->dev;
+ debugfs_remove_recursive(new_dev->dentry);
+
+ opp_set_dev_name(dev, dev_opp->dentry_name);
+
+ dentry = debugfs_rename(rootdir, list_dev->dentry, rootdir,
+ dev_opp->dentry_name);
+ if (!dentry) {
+ dev_err(dev, "%s: Failed to rename link from: %s to %s\n",
+ __func__, dev_name(list_dev->dev), dev_name(dev));
+ return;
+ }
+
+ new_dev->dentry = dentry;
+ dev_opp->dentry = dentry;
+}
+
+/**
+ * opp_debug_unregister - remove a device opp node from debugfs opp directory
+ * @list_dev: list-dev pointer for device
+ * @dev_opp: the device-opp being removed
+ *
+ * Dynamically removes device specific directory from debugfs 'opp' directory.
+ */
+void opp_debug_unregister(struct device_list_opp *list_dev,
+ struct device_opp *dev_opp)
+{
+ if (list_dev->dentry == dev_opp->dentry) {
+ /* Move the real dentry object under another device */
+ if (!list_is_singular(&dev_opp->dev_list)) {
+ opp_migrate_dentry(list_dev, dev_opp);
+ goto out;
+ }
+ dev_opp->dentry = NULL;
+ }
+
+ debugfs_remove_recursive(list_dev->dentry);
+
+out:
+ list_dev->dentry = NULL;
+}
+
+static int __init opp_debug_init(void)
+{
+ /* Create /sys/kernel/debug/opp directory */
+ rootdir = debugfs_create_dir("opp", NULL);
+ if (!rootdir) {
+ pr_err("%s: Failed to create root directory\n", __func__);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+core_initcall(opp_debug_init);
diff --git a/drivers/base/power/opp/opp.h b/drivers/base/power/opp/opp.h
index 7366b2aa8997..690638ef36ee 100644
--- a/drivers/base/power/opp/opp.h
+++ b/drivers/base/power/opp/opp.h
@@ -17,6 +17,7 @@
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/list.h>
+#include <linux/limits.h>
#include <linux/pm_opp.h>
#include <linux/rculist.h>
#include <linux/rcupdate.h>
@@ -50,9 +51,10 @@ extern struct mutex dev_opp_list_lock;
* are protected by the dev_opp_list_lock for integrity.
* IMPORTANT: the opp nodes should be maintained in increasing
* order.
- * @dynamic: not-created from static DT entries.
* @available: true/false - marks if this OPP as available or not
+ * @dynamic: not-created from static DT entries.
* @turbo: true if turbo (boost) OPP
+ * @suspend: true if suspend OPP
* @rate: Frequency in hertz
* @u_volt: Target voltage in microvolts corresponding to this OPP
* @u_volt_min: Minimum voltage in microvolts corresponding to this OPP
@@ -63,6 +65,7 @@ extern struct mutex dev_opp_list_lock;
* @dev_opp: points back to the device_opp struct this opp belongs to
* @rcu_head: RCU callback head used for deferred freeing
* @np: OPP's device node.
+ * @dentry: debugfs dentry pointer (per opp)
*
* This structure stores the OPP information for a given device.
*/
@@ -72,6 +75,7 @@ struct dev_pm_opp {
bool available;
bool dynamic;
bool turbo;
+ bool suspend;
unsigned long rate;
unsigned long u_volt;
@@ -84,6 +88,10 @@ struct dev_pm_opp {
struct rcu_head rcu_head;
struct device_node *np;
+
+#ifdef CONFIG_DEBUG_FS
+ struct dentry *dentry;
+#endif
};
/**
@@ -91,6 +99,7 @@ struct dev_pm_opp {
* @node: list node
* @dev: device to which the struct object belongs
* @rcu_head: RCU callback head used for deferred freeing
+ * @dentry: debugfs dentry pointer (per device)
*
* This is an internal data structure maintaining the list of devices that are
* managed by 'struct device_opp'.
@@ -99,6 +108,10 @@ struct device_list_opp {
struct list_head node;
const struct device *dev;
struct rcu_head rcu_head;
+
+#ifdef CONFIG_DEBUG_FS
+ struct dentry *dentry;
+#endif
};
/**
@@ -113,7 +126,14 @@ struct device_list_opp {
* @dev_list: list of devices that share these OPPs
* @opp_list: list of opps
* @np: struct device_node pointer for opp's DT node.
+ * @clock_latency_ns_max: Max clock latency in nanoseconds.
* @shared_opp: OPP is shared between multiple devices.
+ * @suspend_opp: Pointer to OPP to be used during device suspend.
+ * @supported_hw: Array of version number to support.
+ * @supported_hw_count: Number of elements in supported_hw array.
+ * @prop_name: A name to postfix to many DT properties, while parsing them.
+ * @dentry: debugfs dentry pointer of the real device directory (not links).
+ * @dentry_name: Name of the real dentry.
*
* This is an internal data structure maintaining the link to opps attached to
* a device. This structure is not meant to be shared to users as it is
@@ -135,6 +155,15 @@ struct device_opp {
unsigned long clock_latency_ns_max;
bool shared_opp;
struct dev_pm_opp *suspend_opp;
+
+ unsigned int *supported_hw;
+ unsigned int supported_hw_count;
+ const char *prop_name;
+
+#ifdef CONFIG_DEBUG_FS
+ struct dentry *dentry;
+ char dentry_name[NAME_MAX];
+#endif
};
/* Routines internal to opp core */
@@ -143,4 +172,26 @@ struct device_list_opp *_add_list_dev(const struct device *dev,
struct device_opp *dev_opp);
struct device_node *_of_get_opp_desc_node(struct device *dev);
+#ifdef CONFIG_DEBUG_FS
+void opp_debug_remove_one(struct dev_pm_opp *opp);
+int opp_debug_create_one(struct dev_pm_opp *opp, struct device_opp *dev_opp);
+int opp_debug_register(struct device_list_opp *list_dev,
+ struct device_opp *dev_opp);
+void opp_debug_unregister(struct device_list_opp *list_dev,
+ struct device_opp *dev_opp);
+#else
+static inline void opp_debug_remove_one(struct dev_pm_opp *opp) {}
+
+static inline int opp_debug_create_one(struct dev_pm_opp *opp,
+ struct device_opp *dev_opp)
+{ return 0; }
+static inline int opp_debug_register(struct device_list_opp *list_dev,
+ struct device_opp *dev_opp)
+{ return 0; }
+
+static inline void opp_debug_unregister(struct device_list_opp *list_dev,
+ struct device_opp *dev_opp)
+{ }
+#endif /* DEBUG_FS */
+
#endif /* __DRIVER_OPP_H__ */
diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h
index 9a2e50337af9..95403d2ccaf5 100644
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -55,6 +55,11 @@ int dev_pm_opp_enable(struct device *dev, unsigned long freq);
int dev_pm_opp_disable(struct device *dev, unsigned long freq);
struct srcu_notifier_head *dev_pm_opp_get_notifier(struct device *dev);
+int dev_pm_opp_set_supported_hw(struct device *dev, const u32 *versions,
+ unsigned int count);
+void dev_pm_opp_put_supported_hw(struct device *dev);
+int dev_pm_opp_set_prop_name(struct device *dev, const char *name);
+void dev_pm_opp_put_prop_name(struct device *dev);
#else
static inline unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp)
{
@@ -129,6 +134,23 @@ static inline struct srcu_notifier_head *dev_pm_opp_get_notifier(
{
return ERR_PTR(-EINVAL);
}
+
+static inline int dev_pm_opp_set_supported_hw(struct device *dev,
+ const u32 *versions,
+ unsigned int count)
+{
+ return -EINVAL;
+}
+
+static inline void dev_pm_opp_put_supported_hw(struct device *dev) {}
+
+static inline int dev_pm_opp_set_prop_name(struct device *dev, const char *name)
+{
+ return -EINVAL;
+}
+
+static inline void dev_pm_opp_put_prop_name(struct device *dev) {}
+
#endif /* CONFIG_PM_OPP */
#if defined(CONFIG_PM_OPP) && defined(CONFIG_OF)
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-31 00:58:28 +0300