diff options
-rw-r--r-- | arch/arm/boot/dts/qcom-apq8074-dragonboard.dts | 61 | ||||
-rw-r--r-- | arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts | 14 | ||||
-rw-r--r-- | arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 117 | ||||
-rw-r--r-- | arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi | 63 | ||||
-rw-r--r-- | arch/arm/boot/dts/qcom-msm8974.dtsi | 245 | ||||
-rw-r--r-- | arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts | 77 | ||||
-rw-r--r-- | arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts | 141 |
7 files changed, 331 insertions, 387 deletions
diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts index f47020cf7a90..3051a861ff0c 100644 --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -26,9 +26,6 @@ status = "okay"; clock-frequency = <200000>; - pinctrl-0 = <&i2c11_pins>; - pinctrl-names = "default"; - eeprom: eeprom@52 { compatible = "atmel,24c128"; reg = <0x52>; @@ -256,48 +253,25 @@ vmmc-supply = <&pm8941_l20>; vqmmc-supply = <&pm8941_s3>; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; }; &sdhc_2 { status = "okay"; - cd-gpios = <&tlmm 62 0x1>; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; + cd-gpios = <&tlmm 62 0x1>; vmmc-supply = <&pm8941_l21>; vqmmc-supply = <&pm8941_l13>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; }; &tlmm { - i2c11_pins: i2c11 { - mux { - pins = "gpio83", "gpio84"; - function = "blsp_i2c11"; - }; - }; - - spi8_default: spi8_default { - mosi { - pins = "gpio45"; - function = "blsp_spi8"; - }; - miso { - pins = "gpio46"; - function = "blsp_spi8"; - }; - cs { - pins = "gpio47"; - function = "blsp_spi8"; - }; - clk { - pins = "gpio48"; - function = "blsp_spi8"; - }; - }; - - sdhc1_pin_a: sdhc1-pin-active { + sdc1_on: sdc1-on { clk { pins = "sdc1_clk"; drive-strength = <16>; @@ -311,15 +285,7 @@ }; }; - sdhc2_cd_pin_a: sdhc2-cd-pin-active { - pins = "gpio62"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - sdhc2_pin_a: sdhc2-pin-active { + sdc2_on: sdc2-on { clk { pins = "sdc2_clk"; drive-strength = <10>; @@ -331,5 +297,12 @@ drive-strength = <6>; bias-pull-up; }; + + cd { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts index 7056c6f7145d..7ae0b15e50f9 100644 --- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts +++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts @@ -321,8 +321,9 @@ vmmc-supply = <&pm8941_l20>; vqmmc-supply = <&pm8941_s3>; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; }; &sdhc_2 { @@ -331,12 +332,13 @@ vmmc-supply = <&pm8941_l21>; vqmmc-supply = <&pm8941_l13>; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; }; &tlmm { - sdhc1_pin_a: sdhc1-pin-active { + sdc1_on: sdc1-on { clk { pins = "sdc1_clk"; drive-strength = <16>; @@ -350,7 +352,7 @@ }; }; - sdhc2_pin_a: sdhc2-pin-active { + sdc2_on: sdc2-on { clk { pins = "sdc2_clk"; drive-strength = <10>; diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index 6537950c30ba..7e4e723f1dc3 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -59,9 +59,6 @@ status = "okay"; clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - charger: bq24192@6b { compatible = "ti,bq24192"; reg = <0x6b>; @@ -93,9 +90,6 @@ status = "okay"; clock-frequency = <355000>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - synaptics@70 { compatible = "syna,rmi4-i2c"; reg = <0x70>; @@ -126,9 +120,6 @@ status = "okay"; clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins>; - avago_apds993@39 { compatible = "avago,apds9930"; reg = <0x39>; @@ -144,9 +135,6 @@ status = "okay"; clock-frequency = <355000>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c11_pins>; - led-controller@38 { compatible = "ti,lm3630a"; status = "okay"; @@ -168,9 +156,6 @@ status = "okay"; clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c12_pins>; - mpu6515@68 { compatible = "invensense,mpu6515"; reg = <0x68>; @@ -212,9 +197,6 @@ &blsp2_uart4 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&blsp2_uart4_pin_a>; - bluetooth { compatible = "brcm,bcm43438-bt"; max-speed = <3000000>; @@ -533,8 +515,9 @@ vmmc-supply = <&pm8941_l20>; vqmmc-supply = <&pm8941_s3>; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; }; &sdhc_2 { @@ -545,11 +528,9 @@ vqmmc-supply = <&pm8941_s3>; non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>; - - #address-cells = <1>; - #size-cells = <0>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; bcrmf@1 { compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; @@ -563,7 +544,7 @@ }; &tlmm { - sdhc1_pin_a: sdhc1-pin-active { + sdc1_on: sdc1-on { clk { pins = "sdc1_clk"; drive-strength = <16>; @@ -577,7 +558,7 @@ }; }; - sdhc2_pin_a: sdhc2-pin-active { + sdc2_on: sdc2-on { clk { pins = "sdc2_clk"; drive-strength = <6>; @@ -591,54 +572,6 @@ }; }; - i2c1_pins: i2c1 { - mux { - pins = "gpio2", "gpio3"; - function = "blsp_i2c1"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c2_pins: i2c2 { - mux { - pins = "gpio6", "gpio7"; - function = "blsp_i2c2"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c3_pins: i2c3 { - mux { - pins = "gpio10", "gpio11"; - function = "blsp_i2c3"; - drive-strength = <2>; - bias-disable; - }; - }; - - i2c11_pins: i2c11 { - mux { - pins = "gpio83", "gpio84"; - function = "blsp_i2c11"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c12_pins: i2c12 { - mux { - pins = "gpio87", "gpio88"; - function = "blsp_i2c12"; - drive-strength = <2>; - bias-disable; - }; - }; - mpu6515_pin: mpu6515 { irq { pins = "gpio73"; @@ -693,38 +626,4 @@ function = "gpio"; }; }; - - blsp2_uart4_pin_a: blsp2-uart4-pin-active { - tx { - pins = "gpio53"; - function = "blsp_uart10"; - - drive-strength = <2>; - bias-disable; - }; - - rx { - pins = "gpio54"; - function = "blsp_uart10"; - - drive-strength = <2>; - bias-pull-up; - }; - - cts { - pins = "gpio55"; - function = "blsp_uart10"; - - drive-strength = <2>; - bias-pull-up; - }; - - rts { - pins = "gpio56"; - function = "blsp_uart10"; - - drive-strength = <2>; - bias-disable; - }; - }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi index 870e0aeb4d05..c2e423d2a21e 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi @@ -55,9 +55,6 @@ status = "okay"; clock-frequency = <355000>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - synaptics@2c { compatible = "syna,rmi4-i2c"; reg = <0x2c>; @@ -90,9 +87,6 @@ &blsp1_uart2 { status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&blsp1_uart2_pin_a>; }; &blsp2_dma { @@ -350,8 +344,9 @@ vmmc-supply = <&pm8941_l20>; vqmmc-supply = <&pm8941_s3>; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; }; &sdhc_2 { @@ -362,8 +357,9 @@ cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; }; &smbb { @@ -389,35 +385,7 @@ }; }; - blsp1_uart2_pin_a: blsp1-uart2-pin-active { - rx { - pins = "gpio5"; - function = "blsp_uart2"; - - drive-strength = <2>; - bias-pull-up; - }; - - tx { - pins = "gpio4"; - function = "blsp_uart2"; - - drive-strength = <4>; - bias-disable; - }; - }; - - i2c2_pins: i2c2 { - mux { - pins = "gpio6", "gpio7"; - function = "blsp_i2c2"; - - drive-strength = <2>; - bias-disable; - }; - }; - - sdhc1_pin_a: sdhc1-pin-active { + sdc1_on: sdc1-on { clk { pins = "sdc1_clk"; drive-strength = <16>; @@ -431,15 +399,7 @@ }; }; - sdhc2_cd_pin_a: sdhc2-cd-pin-active { - pins = "gpio62"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - sdhc2_pin_a: sdhc2-pin-active { + sdc2_on: sdc-on { clk { pins = "sdc2_clk"; drive-strength = <10>; @@ -451,5 +411,12 @@ drive-strength = <6>; bias-pull-up; }; + + cd { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index c7dffb36be57..814ad0b46232 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -466,6 +466,9 @@ clock-names = "core", "iface", "xo"; bus-width = <4>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; @@ -482,6 +485,9 @@ clock-names = "core", "iface", "xo"; bus-width = <4>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; @@ -510,6 +516,9 @@ interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c1_default>; + pinctrl-1 = <&blsp1_i2c1_sleep>; #address-cells = <1>; #size-cells = <0>; }; @@ -521,6 +530,9 @@ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c2_default>; + pinctrl-1 = <&blsp1_i2c2_sleep>; #address-cells = <1>; #size-cells = <0>; }; @@ -532,6 +544,9 @@ interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c3_default>; + pinctrl-1 = <&blsp1_i2c3_sleep>; #address-cells = <1>; #size-cells = <0>; }; @@ -543,6 +558,9 @@ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c6_default>; + pinctrl-1 = <&blsp1_i2c6_sleep>; #address-cells = <1>; #size-cells = <0>; }; @@ -591,6 +609,9 @@ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c2_default>; + pinctrl-1 = <&blsp2_i2c2_sleep>; #address-cells = <1>; #size-cells = <0>; }; @@ -602,10 +623,13 @@ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c5_default>; + pinctrl-1 = <&blsp2_i2c5_sleep>; + #address-cells = <1>; + #size-cells = <0>; }; blsp2_i2c6: i2c@f9968000 { @@ -1185,6 +1209,223 @@ interrupt-controller; #interrupt-cells = <2>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + sdc1_off: sdc1-off { + clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_off: sdc2-off { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + cd { + pins = "gpio54"; + bias-disable; + drive-strength = <2>; + }; + }; + + blsp1_uart2_active: blsp1-uart2-active { + rx { + pins = "gpio5"; + function = "blsp_uart2"; + drive-strength = <2>; + bias-pull-up; + }; + + tx { + pins = "gpio4"; + function = "blsp_uart2"; + drive-strength = <4>; + bias-disable; + }; + }; + + blsp2_uart1_active: blsp2-uart1-active { + tx-rts { + pins = "gpio41", "gpio44"; + function = "blsp_uart7"; + drive-strength = <2>; + bias-disable; + }; + + rx-cts { + pins = "gpio42", "gpio43"; + function = "blsp_uart7"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + blsp2_uart1_sleep: blsp2-uart1-sleep { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp2_uart4_active: blsp2-uart4-active { + tx-rts { + pins = "gpio53", "gpio56"; + function = "blsp_uart10"; + drive-strength = <2>; + bias-disable; + }; + + rx-cts { + pins = "gpio54", "gpio55"; + function = "blsp_uart10"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + blsp1_i2c1_default: blsp1-i2c1-default { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c1_sleep: blsp1-i2c1-sleep { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c2_default: blsp1-i2c2-default { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c2_sleep: blsp1-i2c2-sleep { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c3_default: blsp1-i2c3-default { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c3_sleep: blsp1-i2c3-sleep { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-pull-up; + }; + + /* BLSP1_I2C4 info is missing */ + + /* BLSP1_I2C5 info is missing */ + + blsp1_i2c6_default: blsp1-i2c6-default { + pins = "gpio29", "gpio30"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c6_sleep: blsp1-i2c6-sleep { + pins = "gpio29", "gpio30"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-pull-up; + }; + /* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */ + + /* BLSP2_I2C1 info is missing */ + + blsp2_i2c2_default: blsp2-i2c2-default { + pins = "gpio47", "gpio48"; + function = "blsp_i2c8"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c2_sleep: blsp2-i2c2-sleep { + pins = "gpio47", "gpio48"; + function = "blsp_i2c8"; + drive-strength = <2>; + bias-pull-up; + }; + + /* BLSP2_I2C3 info is missing */ + + /* BLSP2_I2C4 info is missing */ + + blsp2_i2c5_default: blsp2-i2c5-default { + pins = "gpio83", "gpio84"; + function = "blsp_i2c11"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c5_sleep: blsp2-i2c5-sleep { + pins = "gpio83", "gpio84"; + function = "blsp_i2c11"; + drive-strength = <2>; + bias-pull-up; + }; + + /* BLSP2_I2C6 info is missing - nobody uses it though? */ + + spi8_default: spi8_default { + mosi { + pins = "gpio45"; + function = "blsp_spi8"; + }; + miso { + pins = "gpio46"; + function = "blsp_spi8"; + }; + cs { + pins = "gpio47"; + function = "blsp_spi8"; + }; + clk { + pins = "gpio48"; + function = "blsp_spi8"; + }; + }; }; mmcc: clock-controller@fd8c0000 { diff --git a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts index 3b1ea8c24f57..c8151a665ea7 100644 --- a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts +++ b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts @@ -161,9 +161,6 @@ &blsp1_i2c2 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - touchscreen@20 { compatible = "syna,rmi4-i2c"; reg = <0x20>; @@ -197,9 +194,6 @@ &blsp1_i2c6 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c6_pins>; - pmic@60 { reg = <0x60>; compatible = "maxim,max77826"; @@ -300,9 +294,6 @@ &blsp2_i2c6 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c12_pins>; - fuelgauge@36 { compatible = "maxim,max17048"; reg = <0x36>; @@ -667,24 +658,21 @@ vmmc-supply = <&pma8084_l20>; vqmmc-supply = <&pma8084_s4>; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; }; &sdhc_2 { status = "okay"; max-frequency = <100000000>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc3_pin_a>; - vmmc-supply = <&vreg_wlan>; vqmmc-supply = <&pma8084_s4>; - non-removable; - #address-cells = <1>; - #size-cells = <0>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; wifi@1 { reg = <1>; @@ -702,7 +690,6 @@ &sdhc_3 { status = "okay"; max-frequency = <100000000>; - vmmc-supply = <&pma8084_l21>; vqmmc-supply = <&pma8084_l13>; @@ -712,11 +699,12 @@ * cd-gpios the driver resorts to polling, so hotplug works. */ pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a /* &sdhc2_cd_pin */>; + pinctrl-0 = <&sdc3_on /* &sdhc3_cd_pin */>; /* cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; */ }; &tlmm { + /* This seems suspicious, but somebody with this device should look into it. */ blsp2_uart2_pins_active: blsp2-uart2-pins-active { pins = "gpio45", "gpio46", "gpio47", "gpio48"; function = "blsp_uart8"; @@ -746,7 +734,7 @@ }; }; - sdhc1_pin_a: sdhc1-pin-active { + sdc1_on: sdhc1-on { clk { pins = "sdc1_clk"; drive-strength = <4>; @@ -760,17 +748,14 @@ }; }; - sdhc2_pin_a: sdhc2-pin-active { - clk-cmd-data { - pins = "gpio35", "gpio36", "gpio37", "gpio38", - "gpio39", "gpio40"; - function = "sdc3"; - drive-strength = <8>; - bias-disable; - }; + sdc3_on: sdc3-on { + pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; + function = "sdc3"; + drive-strength = <8>; + bias-disable; }; - sdhc2_cd_pin: sdhc2-cd { + sdhc3_cd_pin: sdc3-cd-on { pins = "gpio62"; function = "gpio"; @@ -778,7 +763,7 @@ bias-disable; }; - sdhc3_pin_a: sdhc3-pin-active { + sdc2_on: sdhc2-on { clk { pins = "sdc2_clk"; drive-strength = <6>; @@ -792,36 +777,6 @@ }; }; - i2c2_pins: i2c2 { - mux { - pins = "gpio6", "gpio7"; - function = "blsp_i2c2"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c6_pins: i2c6 { - mux { - pins = "gpio29", "gpio30"; - function = "blsp_i2c6"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c12_pins: i2c12 { - mux { - pins = "gpio87", "gpio88"; - function = "blsp_i2c12"; - - drive-strength = <2>; - bias-disable; - }; - }; - i2c_touchkey_pins: i2c-touchkey { mux { pins = "gpio95", "gpio96"; diff --git a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts index b8b6447b3217..465d01da9d69 100644 --- a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts +++ b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts @@ -99,18 +99,12 @@ &blsp1_uart2 { status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&blsp1_uart2_pin_a>; }; &blsp2_i2c2 { status = "okay"; clock-frequency = <355000>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c8_pins>; - synaptics@2c { compatible = "syna,rmi4-i2c"; reg = <0x2c>; @@ -146,9 +140,6 @@ status = "okay"; clock-frequency = <355000>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c11_pins>; - lp8566_wled: backlight@2c { compatible = "ti,lp8556"; reg = <0x2c>; @@ -207,17 +198,12 @@ &blsp2_uart1 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&blsp2_uart7_pin_a>; - bluetooth { compatible = "brcm,bcm43438-bt"; max-speed = <3000000>; pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_pin>, - <&bt_dev_wake_pin>, - <&bt_reg_on_pin>; + pinctrl-0 = <&bt_host_wake_pin>, <&bt_dev_wake_pin>, <&bt_reg_on_pin>; host-wakeup-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; device-wakeup-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; @@ -478,8 +464,9 @@ vmmc-supply = <&pm8941_l20>; vqmmc-supply = <&pm8941_s3>; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; }; &sdhc_2 { @@ -490,8 +477,9 @@ cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; }; &sdhc_3 { @@ -502,7 +490,7 @@ non-removable; pinctrl-names = "default"; - pinctrl-0 = <&sdhc3_pin_a>; + pinctrl-0 = <&sdc3_on>; #address-cells = <1>; #size-cells = <0>; @@ -530,78 +518,6 @@ }; &tlmm { - blsp1_uart2_pin_a: blsp1-uart2-pin-active { - rx { - pins = "gpio5"; - function = "blsp_uart2"; - - drive-strength = <2>; - bias-pull-up; - }; - - tx { - pins = "gpio4"; - function = "blsp_uart2"; - - drive-strength = <4>; - bias-disable; - }; - }; - - blsp2_uart7_pin_a: blsp2-uart7-pin-active { - tx { - pins = "gpio41"; - function = "blsp_uart7"; - - drive-strength = <2>; - bias-disable; - }; - - rx { - pins = "gpio42"; - function = "blsp_uart7"; - - drive-strength = <2>; - bias-pull-up; - }; - - cts { - pins = "gpio43"; - function = "blsp_uart7"; - - drive-strength = <2>; - bias-pull-up; - }; - - rts { - pins = "gpio44"; - function = "blsp_uart7"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c8_pins: i2c8 { - mux { - pins = "gpio47", "gpio48"; - function = "blsp_i2c8"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c11_pins: i2c11 { - mux { - pins = "gpio83", "gpio84"; - function = "blsp_i2c11"; - - drive-strength = <2>; - bias-disable; - }; - }; - lcd_backlight_en_pin_a: lcd-backlight-vddio { pins = "gpio69"; drive-strength = <10>; @@ -609,7 +525,7 @@ bias-disable; }; - sdhc1_pin_a: sdhc1-pin-active { + sdc1_on: sdc1-on { clk { pins = "sdc1_clk"; drive-strength = <16>; @@ -623,15 +539,7 @@ }; }; - sdhc2_cd_pin_a: sdhc2-cd-pin-active { - pins = "gpio62"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - sdhc2_pin_a: sdhc2-pin-active { + sdc2_on: sdc2-on { clk { pins = "sdc2_clk"; drive-strength = <6>; @@ -643,13 +551,19 @@ drive-strength = <6>; bias-pull-up; }; + + cd { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; }; - sdhc3_pin_a: sdhc3-pin-active { + sdc3_on: sdc3-on { clk { pins = "gpio40"; function = "sdc3"; - drive-strength = <10>; bias-disable; }; @@ -657,7 +571,6 @@ cmd { pins = "gpio39"; function = "sdc3"; - drive-strength = <10>; bias-pull-up; }; @@ -665,27 +578,22 @@ data { pins = "gpio35", "gpio36", "gpio37", "gpio38"; function = "sdc3"; - drive-strength = <10>; bias-pull-up; }; }; - ts_int_pin: synaptics { - pin { - pins = "gpio86"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - input-enable; - }; + ts_int_pin: ts-int-pin { + pins = "gpio86"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; }; bt_host_wake_pin: bt-host-wake { pins = "gpio95"; function = "gpio"; - drive-strength = <2>; bias-disable; output-low; @@ -694,7 +602,6 @@ bt_dev_wake_pin: bt-dev-wake { pins = "gpio96"; function = "gpio"; - drive-strength = <2>; bias-disable; }; |