diff options
| -rw-r--r-- | arch/arm/mach-tegra/pm.c | 49 | ||||
| -rw-r--r-- | arch/arm/mach-tegra/reset-handler.S | 26 | ||||
| -rw-r--r-- | arch/arm/mach-tegra/sleep.S | 14 |
3 files changed, 84 insertions, 5 deletions
diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c index 1ad5719779b0..abf5f88778f4 100644 --- a/arch/arm/mach-tegra/pm.c +++ b/arch/arm/mach-tegra/pm.c @@ -33,11 +33,13 @@ #include <soc/tegra/pmc.h> #include <asm/cacheflush.h> +#include <asm/firmware.h> #include <asm/idmap.h> #include <asm/proc-fns.h> #include <asm/smp_plat.h> #include <asm/suspend.h> #include <asm/tlbflush.h> +#include <asm/trusted_foundations.h> #include "iomap.h" #include "pm.h" @@ -159,6 +161,28 @@ int tegra_cpu_do_idle(void) static int tegra_sleep_cpu(unsigned long v2p) { + /* + * L2 cache disabling using kernel API only allowed when all + * secondary CPU's are offline. Cache have to be disabled with + * MMU-on if cache maintenance is done via Trusted Foundations + * firmware. Note that CPUIDLE won't ever enter powergate on Tegra30 + * if any of secondary CPU's is online and this is the LP2-idle + * code-path only for Tegra20/30. + */ + if (trusted_foundations_registered()) + outer_disable(); + + /* + * Note that besides of setting up CPU reset vector this firmware + * call may also do the following, depending on the FW version: + * 1) Disable L2. But this doesn't matter since we already + * disabled the L2. + * 2) Disable D-cache. This need to be taken into account in + * particular by the tegra_disable_clean_inv_dcache() which + * shall avoid the re-disable. + */ + call_firmware_op(prepare_idle, TF_PM_MODE_LP2); + setup_mm_for_reboot(); tegra_sleep_cpu_finish(v2p); @@ -197,6 +221,14 @@ void tegra_idle_lp2_last(void) cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu); + /* + * Resume L2 cache if it wasn't re-enabled early during resume, + * which is the case for Tegra30 that has to re-enable the cache + * via firmware call. In other cases cache is already enabled and + * hence re-enabling is a no-op. This is always a no-op on Tegra114+. + */ + outer_resume(); + restore_cpu_complex(); cpu_cluster_pm_exit(); } @@ -215,6 +247,15 @@ enum tegra_suspend_mode tegra_pm_validate_suspend_mode( static int tegra_sleep_core(unsigned long v2p) { + /* + * Cache have to be disabled with MMU-on if cache maintenance is done + * via Trusted Foundations firmware. This is a no-op on Tegra114+. + */ + if (trusted_foundations_registered()) + outer_disable(); + + call_firmware_op(prepare_idle, TF_PM_MODE_LP1); + setup_mm_for_reboot(); tegra_sleep_core_finish(v2p); @@ -342,6 +383,14 @@ static int tegra_suspend_enter(suspend_state_t state) cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, tegra_sleep_func); + /* + * Resume L2 cache if it wasn't re-enabled early during resume, + * which is the case for Tegra30 that has to re-enable the cache + * via firmware call. In other cases cache is already enabled and + * hence re-enabling is a no-op. + */ + outer_resume(); + switch (mode) { case TEGRA_SUSPEND_LP1: tegra_suspend_exit_lp1(); diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S index 31fb53f9ce13..cd94d7c41fc0 100644 --- a/arch/arm/mach-tegra/reset-handler.S +++ b/arch/arm/mach-tegra/reset-handler.S @@ -20,6 +20,7 @@ #include <soc/tegra/flowctrl.h> #include <soc/tegra/fuse.h> +#include <asm/assembler.h> #include <asm/asm-offsets.h> #include <asm/cache.h> @@ -76,6 +77,7 @@ ENTRY(tegra_resume) orr r1, r1, #1 str r1, [r0] #endif + bl tegra_resume_trusted_foundations #ifdef CONFIG_CACHE_L2X0 /* L2 cache resume & re-enable */ @@ -88,6 +90,30 @@ end_ca9_scu_l2_resume: b cpu_resume ENDPROC(tegra_resume) + +/* + * tegra_resume_trusted_foundations + * + * Trusted Foundations firmware initialization. + * + * Doesn't return if firmware presents. + * Corrupted registers: r1, r2 + */ +ENTRY(tegra_resume_trusted_foundations) + /* Check whether Trusted Foundations firmware presents. */ + mov32 r2, TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + ldr r1, =__tegra_cpu_reset_handler_data_offset + \ + RESET_DATA(TF_PRESENT) + ldr r1, [r2, r1] + cmp r1, #0 + reteq lr + + .arch_extension sec + /* First call after suspend wakes firmware. No arguments required. */ + smc #0 + + b cpu_resume +ENDPROC(tegra_resume_trusted_foundations) #endif .align L1_CACHE_SHIFT diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S index 5e3496753df1..1735ded5a812 100644 --- a/arch/arm/mach-tegra/sleep.S +++ b/arch/arm/mach-tegra/sleep.S @@ -49,8 +49,9 @@ ENTRY(tegra_disable_clean_inv_dcache) /* Disable the D-cache */ mrc p15, 0, r2, c1, c0, 0 + tst r2, #CR_C @ see tegra_sleep_cpu() bic r2, r2, #CR_C - mcr p15, 0, r2, c1, c0, 0 + mcrne p15, 0, r2, c1, c0, 0 isb /* Flush the D-cache */ @@ -132,10 +133,13 @@ ENTRY(tegra_shut_off_mmu) #ifdef CONFIG_CACHE_L2X0 /* Disable L2 cache */ check_cpu_part_num 0xc09, r9, r10 - movweq r2, #:lower16:(TEGRA_ARM_PERIF_BASE + 0x3000) - movteq r2, #:upper16:(TEGRA_ARM_PERIF_BASE + 0x3000) - moveq r3, #0 - streq r3, [r2, #L2X0_CTRL] + retne r0 + + mov32 r2, TEGRA_ARM_PERIF_BASE + 0x3000 + ldr r3, [r2, #L2X0_CTRL] + tst r3, #L2X0_CTRL_EN @ see tegra_sleep_cpu() + mov r3, #0 + strne r3, [r2, #L2X0_CTRL] #endif ret r0 ENDPROC(tegra_shut_off_mmu) |