diff options
| -rw-r--r-- | Documentation/devicetree/bindings/sound/wm8994.txt | 58 | ||||
| -rw-r--r-- | drivers/mfd/wm8994-core.c | 73 |
2 files changed, 128 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/sound/wm8994.txt b/Documentation/devicetree/bindings/sound/wm8994.txt index 7a7eb1e7bda6..f2f3e80934d2 100644 --- a/Documentation/devicetree/bindings/sound/wm8994.txt +++ b/Documentation/devicetree/bindings/sound/wm8994.txt @@ -5,14 +5,70 @@ on the board). Required properties: - - compatible : "wlf,wm1811", "wlf,wm8994", "wlf,wm8958" + - compatible : One of "wlf,wm1811", "wlf,wm8994" or "wlf,wm8958". - reg : the I2C address of the device for I2C, the chip select number for SPI. + - gpio-controller : Indicates this device is a GPIO controller. + - #gpio-cells : Must be 2. The first cell is the pin number and the + second cell is used to specify optional parameters (currently unused). + + - AVDD2-supply, DBVDD1-supply, DBVDD2-supply, DBVDD3-supply, CPVDD-supply, + SPKVDD1-supply, SPKVDD2-supply : power supplies for the device, as covered + in Documentation/devicetree/bindings/regulator/regulator.txt + +Optional properties: + + - interrupts : The interrupt line the IRQ signal for the device is + connected to. This is optional, if it is not connected then none + of the interrupt related properties should be specified. + - interrupt-controller : These devices contain interrupt controllers + and may provide interrupt services to other devices if they have an + interrupt line connected. + - interrupt-parent : The parent interrupt controller. + - #interrupt-cells: the number of cells to describe an IRQ, this should be 2. + The first cell is the IRQ number. + The second cell is the flags, encoded as the trigger masks from + Documentation/devicetree/bindings/interrupts.txt + + - wlf,gpio-cfg : A list of GPIO configuration register values. If absent, + no configuration of these registers is performed. If any value is + over 0xffff then the register will be left as default. If present 11 + values must be supplied. + + - wlf,micbias-cfg : Two MICBIAS register values for WM1811 or + WM8958. If absent the register defaults will be used. + + - wlf,ldo1ena : GPIO specifier for control of LDO1ENA input to device. + - wlf,ldo2ena : GPIO specifier for control of LDO2ENA input to device. + + - wlf,lineout1-se : If present LINEOUT1 is in single ended mode. + - wlf,lineout2-se : If present LINEOUT2 is in single ended mode. + + - wlf,lineout1-feedback : If present LINEOUT1 has common mode feedback + connected. + - wlf,lineout2-feedback : If present LINEOUT2 has common mode feedback + connected. + + - wlf,ldoena-always-driven : If present LDOENA is always driven. + Example: codec: wm8994@1a { compatible = "wlf,wm8994"; reg = <0x1a>; + + gpio-controller; + #gpio-cells = <2>; + + lineout1-se; + + AVDD2-supply = <®ulator>; + CPVDD-supply = <®ulator>; + DBVDD1-supply = <®ulator>; + DBVDD2-supply = <®ulator>; + DBVDD3-supply = <®ulator>; + SPKVDD1-supply = <®ulator>; + SPKVDD2-supply = <®ulator>; }; diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c index 3f8d591e9fe2..00e4fe2f3c75 100644 --- a/drivers/mfd/wm8994-core.c +++ b/drivers/mfd/wm8994-core.c @@ -19,6 +19,9 @@ #include <linux/err.h> #include <linux/delay.h> #include <linux/mfd/core.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> #include <linux/pm_runtime.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> @@ -396,6 +399,60 @@ static const struct reg_default wm1811_reva_patch[] = { { 0x102, 0x0 }, }; +#ifdef CONFIG_OF +static int wm8994_set_pdata_from_of(struct wm8994 *wm8994) +{ + struct device_node *np = wm8994->dev->of_node; + struct wm8994_pdata *pdata = &wm8994->pdata; + int i; + + if (!np) + return 0; + + if (of_property_read_u32_array(np, "wlf,gpio-cfg", pdata->gpio_defaults, + ARRAY_SIZE(pdata->gpio_defaults)) >= 0) { + for (i = 0; i < ARRAY_SIZE(pdata->gpio_defaults); i++) { + if (wm8994->pdata.gpio_defaults[i] == 0) + pdata->gpio_defaults[i] + = WM8994_CONFIGURE_GPIO; + } + } + + of_property_read_u32_array(np, "wlf,micbias-cfg", pdata->micbias, + ARRAY_SIZE(pdata->micbias)); + + pdata->lineout1_diff = true; + pdata->lineout2_diff = true; + if (of_find_property(np, "wlf,lineout1-se", NULL)) + pdata->lineout1_diff = false; + if (of_find_property(np, "wlf,lineout2-se", NULL)) + pdata->lineout2_diff = false; + + if (of_find_property(np, "wlf,lineout1-feedback", NULL)) + pdata->lineout1fb = true; + if (of_find_property(np, "wlf,lineout2-feedback", NULL)) + pdata->lineout2fb = true; + + if (of_find_property(np, "wlf,ldoena-always-driven", NULL)) + pdata->lineout2fb = true; + + pdata->ldo[0].enable = of_get_named_gpio(np, "wlf,ldo1ena", 0); + if (pdata->ldo[0].enable < 0) + pdata->ldo[0].enable = 0; + + pdata->ldo[1].enable = of_get_named_gpio(np, "wlf,ldo2ena", 0); + if (pdata->ldo[1].enable < 0) + pdata->ldo[1].enable = 0; + + return 0; +} +#else +static int wm8994_set_pdata_from_of(struct wm8994 *wm8994) +{ + return 0; +} +#endif + /* * Instantiate the generic non-control parts of the device. */ @@ -414,6 +471,10 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq) } pdata = &wm8994->pdata; + ret = wm8994_set_pdata_from_of(wm8994); + if (ret != 0) + return ret; + dev_set_drvdata(wm8994->dev, wm8994); /* Add the on-chip regulators first for bootstrapping */ @@ -683,6 +744,7 @@ MODULE_DEVICE_TABLE(of, wm8994_of_match); static int wm8994_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { + const struct of_device_id *of_id; struct wm8994 *wm8994; int ret; @@ -693,7 +755,14 @@ static int wm8994_i2c_probe(struct i2c_client *i2c, i2c_set_clientdata(i2c, wm8994); wm8994->dev = &i2c->dev; wm8994->irq = i2c->irq; - wm8994->type = id->driver_data; + + if (i2c->dev.of_node) { + of_id = of_match_device(wm8994_of_match, &i2c->dev); + if (of_id) + wm8994->type = (int)of_id->data; + } else { + wm8994->type = id->driver_data; + } wm8994->regmap = devm_regmap_init_i2c(i2c, &wm8994_base_regmap_config); if (IS_ERR(wm8994->regmap)) { @@ -733,7 +802,7 @@ static struct i2c_driver wm8994_i2c_driver = { .name = "wm8994", .owner = THIS_MODULE, .pm = &wm8994_pm_ops, - .of_match_table = wm8994_of_match, + .of_match_table = of_match_ptr(wm8994_of_match), }, .probe = wm8994_i2c_probe, .remove = wm8994_i2c_remove, |