diff options
| -rw-r--r-- | arch/powerpc/Makefile | 1 | ||||
| -rw-r--r-- | arch/powerpc/kernel/Makefile | 3 | ||||
| -rw-r--r-- | arch/powerpc/kernel/head_32.S | 95 | ||||
| -rw-r--r-- | arch/powerpc/kernel/head_64.S | 118 | ||||
| -rw-r--r-- | arch/powerpc/kernel/misc_64.S | 92 | ||||
| -rw-r--r-- | arch/powerpc/kernel/vector.S | 210 |
6 files changed, 213 insertions, 306 deletions
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 551fc58c05cf..bc35f4e2b81c 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -142,6 +142,7 @@ head-$(CONFIG_FSL_BOOKE) := arch/powerpc/kernel/head_fsl_booke.o head-$(CONFIG_PPC64) += arch/powerpc/kernel/entry_64.o head-$(CONFIG_PPC_FPU) += arch/powerpc/kernel/fpu.o +head-$(CONFIG_ALTIVEC) += arch/powerpc/kernel/vector.o core-y += arch/powerpc/kernel/ \ arch/powerpc/mm/ \ diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 71901fbda4a5..cbc359f69e00 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -36,7 +36,7 @@ obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \ firmware.o nvram_64.o obj64-$(CONFIG_RELOCATABLE) += reloc_64.o obj-$(CONFIG_PPC64) += vdso64/ -obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o +obj-$(CONFIG_ALTIVEC) += vecemu.o obj-$(CONFIG_PPC_970_NAP) += idle_power4.o obj-$(CONFIG_PPC_OF) += of_device.o of_platform.o prom_parse.o obj-$(CONFIG_PPC_CLOCK) += clock.o @@ -108,6 +108,7 @@ obj-y += ppc_save_regs.o endif extra-$(CONFIG_PPC_FPU) += fpu.o +extra-$(CONFIG_ALTIVEC) += vector.o extra-$(CONFIG_PPC64) += entry_64.o extra-y += systbl_chk.i diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index c01467f952d3..6437f905c566 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -743,101 +743,6 @@ PerformanceMonitor: addi r3,r1,STACK_FRAME_OVERHEAD EXC_XFER_STD(0xf00, performance_monitor_exception) -#ifdef CONFIG_ALTIVEC -/* Note that the AltiVec support is closely modeled after the FP - * support. Changes to one are likely to be applicable to the - * other! */ -load_up_altivec: -/* - * Disable AltiVec for the task which had AltiVec previously, - * and save its AltiVec registers in its thread_struct. - * Enables AltiVec for use in the kernel on return. - * On SMP we know the AltiVec units are free, since we give it up every - * switch. -- Kumar - */ - mfmsr r5 - oris r5,r5,MSR_VEC@h - MTMSRD(r5) /* enable use of AltiVec now */ - isync -/* - * For SMP, we don't do lazy AltiVec switching because it just gets too - * horrendously complex, especially when a task switches from one CPU - * to another. Instead we call giveup_altivec in switch_to. - */ -#ifndef CONFIG_SMP - tophys(r6,0) - addis r3,r6,last_task_used_altivec@ha - lwz r4,last_task_used_altivec@l(r3) - cmpwi 0,r4,0 - beq 1f - add r4,r4,r6 - addi r4,r4,THREAD /* want THREAD of last_task_used_altivec */ - SAVE_32VRS(0,r10,r4) - mfvscr vr0 - li r10,THREAD_VSCR - stvx vr0,r10,r4 - lwz r5,PT_REGS(r4) - add r5,r5,r6 - lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5) - lis r10,MSR_VEC@h - andc r4,r4,r10 /* disable altivec for previous task */ - stw r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#endif /* CONFIG_SMP */ - /* enable use of AltiVec after return */ - oris r9,r9,MSR_VEC@h - mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */ - li r4,1 - li r10,THREAD_VSCR - stw r4,THREAD_USED_VR(r5) - lvx vr0,r10,r5 - mtvscr vr0 - REST_32VRS(0,r10,r5) -#ifndef CONFIG_SMP - subi r4,r5,THREAD - sub r4,r4,r6 - stw r4,last_task_used_altivec@l(r3) -#endif /* CONFIG_SMP */ - /* restore registers and return */ - /* we haven't used ctr or xer or lr */ - b fast_exception_return - -/* - * giveup_altivec(tsk) - * Disable AltiVec for the task given as the argument, - * and save the AltiVec registers in its thread_struct. - * Enables AltiVec for use in the kernel on return. - */ - - .globl giveup_altivec -giveup_altivec: - mfmsr r5 - oris r5,r5,MSR_VEC@h - SYNC - MTMSRD(r5) /* enable use of AltiVec now */ - isync - cmpwi 0,r3,0 - beqlr- /* if no previous owner, done */ - addi r3,r3,THREAD /* want THREAD of task */ - lwz r5,PT_REGS(r3) - cmpwi 0,r5,0 - SAVE_32VRS(0, r4, r3) - mfvscr vr0 - li r4,THREAD_VSCR - stvx vr0,r4,r3 - beq 1f - lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5) - lis r3,MSR_VEC@h - andc r4,r4,r3 /* disable AltiVec for previous task */ - stw r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#ifndef CONFIG_SMP - li r5,0 - lis r4,last_task_used_altivec@ha - stw r5,last_task_used_altivec@l(r4) -#endif /* CONFIG_SMP */ - blr -#endif /* CONFIG_ALTIVEC */ /* * This code is jumped to from the startup code to copy diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 50ef505b8fb6..382495fa90b0 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -844,124 +844,6 @@ unrecov_fer: bl .unrecoverable_exception b 1b -#ifdef CONFIG_ALTIVEC -/* - * load_up_altivec(unused, unused, tsk) - * Disable VMX for the task which had it previously, - * and save its vector registers in its thread_struct. - * Enables the VMX for use in the kernel on return. - * On SMP we know the VMX is free, since we give it up every - * switch (ie, no lazy save of the vector registers). - * On entry: r13 == 'current' && last_task_used_altivec != 'current' - */ -_STATIC(load_up_altivec) - mfmsr r5 /* grab the current MSR */ - oris r5,r5,MSR_VEC@h - mtmsrd r5 /* enable use of VMX now */ - isync - -/* - * For SMP, we don't do lazy VMX switching because it just gets too - * horrendously complex, especially when a task switches from one CPU - * to another. Instead we call giveup_altvec in switch_to. - * VRSAVE isn't dealt with here, that is done in the normal context - * switch code. Note that we could rely on vrsave value to eventually - * avoid saving all of the VREGs here... - */ -#ifndef CONFIG_SMP - ld r3,last_task_used_altivec@got(r2) - ld r4,0(r3) - cmpdi 0,r4,0 - beq 1f - /* Save VMX state to last_task_used_altivec's THREAD struct */ - addi r4,r4,THREAD - SAVE_32VRS(0,r5,r4) - mfvscr vr0 - li r10,THREAD_VSCR - stvx vr0,r10,r4 - /* Disable VMX for last_task_used_altivec */ - ld r5,PT_REGS(r4) - ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) - lis r6,MSR_VEC@h - andc r4,r4,r6 - std r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#endif /* CONFIG_SMP */ - /* Hack: if we get an altivec unavailable trap with VRSAVE - * set to all zeros, we assume this is a broken application - * that fails to set it properly, and thus we switch it to - * all 1's - */ - mfspr r4,SPRN_VRSAVE - cmpdi 0,r4,0 - bne+ 1f - li r4,-1 - mtspr SPRN_VRSAVE,r4 -1: - /* enable use of VMX after return */ - ld r4,PACACURRENT(r13) - addi r5,r4,THREAD /* Get THREAD */ - oris r12,r12,MSR_VEC@h - std r12,_MSR(r1) - li r4,1 - li r10,THREAD_VSCR - stw r4,THREAD_USED_VR(r5) - lvx vr0,r10,r5 - mtvscr vr0 - REST_32VRS(0,r4,r5) -#ifndef CONFIG_SMP - /* Update last_task_used_math to 'current' */ - subi r4,r5,THREAD /* Back to 'current' */ - std r4,0(r3) -#endif /* CONFIG_SMP */ - /* restore registers and return */ - blr -#endif /* CONFIG_ALTIVEC */ - -#ifdef CONFIG_VSX -/* - * load_up_vsx(unused, unused, tsk) - * Disable VSX for the task which had it previously, - * and save its vector registers in its thread_struct. - * Reuse the fp and vsx saves, but first check to see if they have - * been saved already. - * On entry: r13 == 'current' && last_task_used_vsx != 'current' - */ -_STATIC(load_up_vsx) -/* Load FP and VSX registers if they haven't been done yet */ - andi. r5,r12,MSR_FP - beql+ load_up_fpu /* skip if already loaded */ - andis. r5,r12,MSR_VEC@h - beql+ load_up_altivec /* skip if already loaded */ - -#ifndef CONFIG_SMP - ld r3,last_task_used_vsx@got(r2) - ld r4,0(r3) - cmpdi 0,r4,0 - beq 1f - /* Disable VSX for last_task_used_vsx */ - addi r4,r4,THREAD - ld r5,PT_REGS(r4) - ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) - lis r6,MSR_VSX@h - andc r6,r4,r6 - std r6,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#endif /* CONFIG_SMP */ - ld r4,PACACURRENT(r13) - addi r4,r4,THREAD /* Get THREAD */ - li r6,1 - stw r6,THREAD_USED_VSR(r4) /* ... also set thread used vsr */ - /* enable use of VSX after return */ - oris r12,r12,MSR_VSX@h - std r12,_MSR(r1) -#ifndef CONFIG_SMP - /* Update last_task_used_math to 'current' */ - ld r4,PACACURRENT(r13) - std r4,0(r3) -#endif /* CONFIG_SMP */ - b fast_exception_return -#endif /* CONFIG_VSX */ /* * Hash table stuff diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index b9530b2395a2..a5cf9c1356a6 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -457,98 +457,6 @@ _GLOBAL(disable_kernel_fp) isync blr -#ifdef CONFIG_ALTIVEC - -#if 0 /* this has no callers for now */ -/* - * disable_kernel_altivec() - * Disable the VMX. - */ -_GLOBAL(disable_kernel_altivec) - mfmsr r3 - rldicl r0,r3,(63-MSR_VEC_LG),1 - rldicl r3,r0,(MSR_VEC_LG+1),0 - mtmsrd r3 /* disable use of VMX now */ - isync - blr -#endif /* 0 */ - -/* - * giveup_altivec(tsk) - * Disable VMX for the task given as the argument, - * and save the vector registers in its thread_struct. - * Enables the VMX for use in the kernel on return. - */ -_GLOBAL(giveup_altivec) - mfmsr r5 - oris r5,r5,MSR_VEC@h - mtmsrd r5 /* enable use of VMX now */ - isync - cmpdi 0,r3,0 - beqlr- /* if no previous owner, done */ - addi r3,r3,THREAD /* want THREAD of task */ - ld r5,PT_REGS(r3) - cmpdi 0,r5,0 - SAVE_32VRS(0,r4,r3) - mfvscr vr0 - li r4,THREAD_VSCR - stvx vr0,r4,r3 - beq 1f - ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) -#ifdef CONFIG_VSX -BEGIN_FTR_SECTION - lis r3,(MSR_VEC|MSR_VSX)@h -FTR_SECTION_ELSE - lis r3,MSR_VEC@h -ALT_FTR_SECTION_END_IFSET(CPU_FTR_VSX) -#else - lis r3,MSR_VEC@h -#endif - andc r4,r4,r3 /* disable FP for previous task */ - std r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#ifndef CONFIG_SMP - li r5,0 - ld r4,last_task_used_altivec@got(r2) - std r5,0(r4) -#endif /* CONFIG_SMP */ - blr - -#endif /* CONFIG_ALTIVEC */ - -#ifdef CONFIG_VSX -/* - * __giveup_vsx(tsk) - * Disable VSX for the task given as the argument. - * Does NOT save vsx registers. - * Enables the VSX for use in the kernel on return. - */ -_GLOBAL(__giveup_vsx) - mfmsr r5 - oris r5,r5,MSR_VSX@h - mtmsrd r5 /* enable use of VSX now */ - isync - - cmpdi 0,r3,0 - beqlr- /* if no previous owner, done */ - addi r3,r3,THREAD /* want THREAD of task */ - ld r5,PT_REGS(r3) - cmpdi 0,r5,0 - beq 1f - ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) - lis r3,MSR_VSX@h - andc r4,r4,r3 /* disable VSX for previous task */ - std r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#ifndef CONFIG_SMP - li r5,0 - ld r4,last_task_used_vsx@got(r2) - std r5,0(r4) -#endif /* CONFIG_SMP */ - blr - -#endif /* CONFIG_VSX */ - /* kexec_wait(phys_cpu) * * wait for the flag to change, indicating this kernel is going away but diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S index 49ac3d6e1399..ef36cbbc5882 100644 --- a/arch/powerpc/kernel/vector.S +++ b/arch/powerpc/kernel/vector.S @@ -1,5 +1,215 @@ +#include <asm/processor.h> #include <asm/ppc_asm.h> #include <asm/reg.h> +#include <asm/asm-offsets.h> +#include <asm/cputable.h> +#include <asm/thread_info.h> +#include <asm/page.h> + +/* + * load_up_altivec(unused, unused, tsk) + * Disable VMX for the task which had it previously, + * and save its vector registers in its thread_struct. + * Enables the VMX for use in the kernel on return. + * On SMP we know the VMX is free, since we give it up every + * switch (ie, no lazy save of the vector registers). + */ +_GLOBAL(load_up_altivec) + mfmsr r5 /* grab the current MSR */ + oris r5,r5,MSR_VEC@h + MTMSRD(r5) /* enable use of AltiVec now */ + isync + +/* + * For SMP, we don't do lazy VMX switching because it just gets too + * horrendously complex, especially when a task switches from one CPU + * to another. Instead we call giveup_altvec in switch_to. + * VRSAVE isn't dealt with here, that is done in the normal context + * switch code. Note that we could rely on vrsave value to eventually + * avoid saving all of the VREGs here... + */ +#ifndef CONFIG_SMP + LOAD_REG_ADDRBASE(r3, last_task_used_altivec) + toreal(r3) + PPC_LL r4,ADDROFF(last_task_used_altivec)(r3) + PPC_LCMPI 0,r4,0 + beq 1f + + /* Save VMX state to last_task_used_altivec's THREAD struct */ + toreal(r4) + addi r4,r4,THREAD + SAVE_32VRS(0,r5,r4) + mfvscr vr0 + li r10,THREAD_VSCR + stvx vr0,r10,r4 + /* Disable VMX for last_task_used_altivec */ + PPC_LL r5,PT_REGS(r4) + toreal(r5) + PPC_LL r4,_MSR-STACK_FRAME_OVERHEAD(r5) + lis r10,MSR_VEC@h + andc r4,r4,r10 + PPC_STL r4,_MSR-STACK_FRAME_OVERHEAD(r5) +1: +#endif /* CONFIG_SMP */ + + /* Hack: if we get an altivec unavailable trap with VRSAVE + * set to all zeros, we assume this is a broken application + * that fails to set it properly, and thus we switch it to + * all 1's + */ + mfspr r4,SPRN_VRSAVE + cmpdi 0,r4,0 + bne+ 1f + li r4,-1 + mtspr SPRN_VRSAVE,r4 +1: + /* enable use of VMX after return */ +#ifdef CONFIG_PPC32 + mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */ + oris r9,r9,MSR_VEC@h +#else + ld r4,PACACURRENT(r13) + addi r5,r4,THREAD /* Get THREAD */ + oris r12,r12,MSR_VEC@h + std r12,_MSR(r1) +#endif + li r4,1 + li r10,THREAD_VSCR + stw r4,THREAD_USED_VR(r5) + lvx vr0,r10,r5 + mtvscr vr0 + REST_32VRS(0,r4,r5) +#ifndef CONFIG_SMP + /* Update last_task_used_math to 'current' */ + subi r4,r5,THREAD /* Back to 'current' */ + fromreal(r4) + PPC_STL r4,ADDROFF(last_task_used_math)(r3) +#endif /* CONFIG_SMP */ + /* restore registers and return */ + blr + +/* + * giveup_altivec(tsk) + * Disable VMX for the task given as the argument, + * and save the vector registers in its thread_struct. + * Enables the VMX for use in the kernel on return. + */ +_GLOBAL(giveup_altivec) + mfmsr r5 + oris r5,r5,MSR_VEC@h + SYNC + MTMSRD(r5) /* enable use of VMX now */ + isync + PPC_LCMPI 0,r3,0 + beqlr- /* if no previous owner, done */ + addi r3,r3,THREAD /* want THREAD of task */ + PPC_LL r5,PT_REGS(r3) + PPC_LCMPI 0,r5,0 + SAVE_32VRS(0,r4,r3) + mfvscr vr0 + li r4,THREAD_VSCR + stvx vr0,r4,r3 + beq 1f + PPC_LL r4,_MSR-STACK_FRAME_OVERHEAD(r5) +#ifdef CONFIG_VSX +BEGIN_FTR_SECTION + lis r3,(MSR_VEC|MSR_VSX)@h +FTR_SECTION_ELSE + lis r3,MSR_VEC@h +ALT_FTR_SECTION_END_IFSET(CPU_FTR_VSX) +#else + lis r3,MSR_VEC@h +#endif + andc r4,r4,r3 /* disable FP for previous task */ + PPC_STL r4,_MSR-STACK_FRAME_OVERHEAD(r5) +1: +#ifndef CONFIG_SMP + li r5,0 + LOAD_REG_ADDRBASE(r4,last_task_used_altivec) + PPC_STL r5,ADDROFF(last_task_used_altivec)(r4) +#endif /* CONFIG_SMP */ + blr + +#ifdef CONFIG_VSX + +#ifdef CONFIG_PPC32 +#error This asm code isn't ready for 32-bit kernels +#endif + +/* + * load_up_vsx(unused, unused, tsk) + * Disable VSX for the task which had it previously, + * and save its vector registers in its thread_struct. + * Reuse the fp and vsx saves, but first check to see if they have + * been saved already. + */ +_GLOBAL(load_up_vsx) +/* Load FP and VSX registers if they haven't been done yet */ + andi. r5,r12,MSR_FP + beql+ load_up_fpu /* skip if already loaded */ + andis. r5,r12,MSR_VEC@h + beql+ load_up_altivec /* skip if already loaded */ + +#ifndef CONFIG_SMP + ld r3,last_task_used_vsx@got(r2) + ld r4,0(r3) + cmpdi 0,r4,0 + beq 1f + /* Disable VSX for last_task_used_vsx */ + addi r4,r4,THREAD + ld r5,PT_REGS(r4) + ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) + lis r6,MSR_VSX@h + andc r6,r4,r6 + std r6,_MSR-STACK_FRAME_OVERHEAD(r5) +1: +#endif /* CONFIG_SMP */ + ld r4,PACACURRENT(r13) + addi r4,r4,THREAD /* Get THREAD */ + li r6,1 + stw r6,THREAD_USED_VSR(r4) /* ... also set thread used vsr */ + /* enable use of VSX after return */ + oris r12,r12,MSR_VSX@h + std r12,_MSR(r1) +#ifndef CONFIG_SMP + /* Update last_task_used_math to 'current' */ + ld r4,PACACURRENT(r13) + std r4,0(r3) +#endif /* CONFIG_SMP */ + b fast_exception_return + +/* + * __giveup_vsx(tsk) + * Disable VSX for the task given as the argument. + * Does NOT save vsx registers. + * Enables the VSX for use in the kernel on return. + */ +_GLOBAL(__giveup_vsx) + mfmsr r5 + oris r5,r5,MSR_VSX@h + mtmsrd r5 /* enable use of VSX now */ + isync + + cmpdi 0,r3,0 + beqlr- /* if no previous owner, done */ + addi r3,r3,THREAD /* want THREAD of task */ + ld r5,PT_REGS(r3) + cmpdi 0,r5,0 + beq 1f + ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) + lis r3,MSR_VSX@h + andc r4,r4,r3 /* disable VSX for previous task */ + std r4,_MSR-STACK_FRAME_OVERHEAD(r5) +1: +#ifndef CONFIG_SMP + li r5,0 + ld r4,last_task_used_vsx@got(r2) + std r5,0(r4) +#endif /* CONFIG_SMP */ + blr + +#endif /* CONFIG_VSX */ + /* * The routines below are in assembler so we can closely control the |