diff options
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/tosa.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/tosa.c | 37 | ||||
| -rw-r--r-- | drivers/input/touchscreen/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/mfd/Kconfig | 16 | ||||
| -rw-r--r-- | drivers/mfd/Makefile | 2 | ||||
| -rw-r--r-- | drivers/mfd/da903x.c | 563 | ||||
| -rw-r--r-- | drivers/mfd/htc-egpio.c | 2 | ||||
| -rw-r--r-- | drivers/mfd/mfd-core.c | 15 | ||||
| -rw-r--r-- | drivers/mfd/sm501.c | 6 | ||||
| -rw-r--r-- | drivers/mfd/t7l66xb.c | 40 | ||||
| -rw-r--r-- | drivers/mfd/tc6387xb.c | 47 | ||||
| -rw-r--r-- | drivers/mfd/tc6393xb.c | 296 | ||||
| -rw-r--r-- | drivers/mfd/twl4030-core.c | 1193 | ||||
| -rw-r--r-- | drivers/mfd/wm8350-core.c | 2 | ||||
| -rw-r--r-- | include/linux/i2c/twl4030.h | 339 | ||||
| -rw-r--r-- | include/linux/mfd/da903x.h | 201 | ||||
| -rw-r--r-- | include/linux/mfd/t7l66xb.h | 2 | ||||
| -rw-r--r-- | include/linux/mfd/tc6387xb.h | 3 | ||||
| -rw-r--r-- | include/linux/mfd/tc6393xb.h | 17 |
19 files changed, 2687 insertions, 98 deletions
diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h index a72803f0461b..8bce6d8615b9 100644 --- a/arch/arm/mach-pxa/include/mach/tosa.h +++ b/arch/arm/mach-pxa/include/mach/tosa.h @@ -59,8 +59,6 @@ * TC6393XB GPIOs */ #define TOSA_TC6393XB_GPIO_BASE (NR_BUILTIN_GPIO + 2 * 12) -#define TOSA_TC6393XB_GPIO(i) (TOSA_TC6393XB_GPIO_BASE + (i)) -#define TOSA_TC6393XB_GPIO_BIT(gpio) (1 << (gpio - TOSA_TC6393XB_GPIO_BASE)) #define TOSA_GPIO_TG_ON (TOSA_TC6393XB_GPIO_BASE + 0) #define TOSA_GPIO_L_MUTE (TOSA_TC6393XB_GPIO_BASE + 1) diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 130e37e4ebdd..a6c4694359ca 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -706,16 +706,39 @@ static struct tmio_nand_data tosa_tc6393xb_nand_config = { .badblock_pattern = &tosa_tc6393xb_nand_bbt, }; -static struct tc6393xb_platform_data tosa_tc6393xb_setup = { +static int tosa_tc6393xb_setup(struct platform_device *dev) +{ + int rc; + + rc = gpio_request(TOSA_GPIO_CARD_VCC_ON, "CARD_VCC_ON"); + if (rc) + goto err_req; + + rc = gpio_direction_output(TOSA_GPIO_CARD_VCC_ON, 1); + if (rc) + goto err_dir; + + return rc; + +err_dir: + gpio_free(TOSA_GPIO_CARD_VCC_ON); +err_req: + return rc; +} + +static void tosa_tc6393xb_teardown(struct platform_device *dev) +{ + gpio_free(TOSA_GPIO_CARD_VCC_ON); +} + +static struct tc6393xb_platform_data tosa_tc6393xb_data = { .scr_pll2cr = 0x0cc1, .scr_gper = 0x3300, - .scr_gpo_dsr = - TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON), - .scr_gpo_doecr = - TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON), .irq_base = IRQ_BOARD_START, .gpio_base = TOSA_TC6393XB_GPIO_BASE, + .setup = tosa_tc6393xb_setup, + .teardown = tosa_tc6393xb_teardown, .enable = tosa_tc6393xb_enable, .disable = tosa_tc6393xb_disable, @@ -723,6 +746,8 @@ static struct tc6393xb_platform_data tosa_tc6393xb_setup = { .resume = tosa_tc6393xb_resume, .nand_data = &tosa_tc6393xb_nand_config, + + .resume_restore = 1, }; @@ -730,7 +755,7 @@ static struct platform_device tc6393xb_device = { .name = "tc6393xb", .id = -1, .dev = { - .platform_data = &tosa_tc6393xb_setup, + .platform_data = &tosa_tc6393xb_data, }, .num_resources = ARRAY_SIZE(tc6393xb_resources), .resource = tc6393xb_resources, diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 6e1e8c624f9e..8317fdef1691 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -219,7 +219,7 @@ config TOUCHSCREEN_ATMEL_TSADCC config TOUCHSCREEN_UCB1400 tristate "Philips UCB1400 touchscreen" - select AC97_BUS + depends on AC97_BUS depends on UCB1400_CORE help This enables support for the Philips UCB1400 touchscreen interface. diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 5eff8ad834d6..5a79d2d4cdae 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -52,6 +52,8 @@ config HTC_PASIC3 config UCB1400_CORE tristate "Philips UCB1400 Core driver" + depends on AC97_BUS + depends on GPIOLIB help This enables support for the Philips UCB1400 core functions. The UCB1400 is an AC97 audio codec. @@ -59,6 +61,20 @@ config UCB1400_CORE To compile this driver as a module, choose M here: the module will be called ucb1400_core. +config TWL4030_CORE + bool "Texas Instruments TWL4030/TPS659x0 Support" + depends on I2C=y && GENERIC_HARDIRQS && (ARCH_OMAP2 || ARCH_OMAP3) + help + Say yes here if you have TWL4030 family chip on your board. + This core driver provides register access and IRQ handling + facilities, and registers devices for the various functions + so that function-specific drivers can bind to them. + + These multi-function chips are found on many OMAP2 and OMAP3 + boards, providing power management, RTC, GPIO, keypad, a + high speed USB OTG transceiver, an audio codec (on most + versions) and many other features. + config MFD_TMIO bool default n diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 759b1fe1c891..68e237b830ad 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -17,6 +17,8 @@ wm8350-objs := wm8350-core.o wm8350-regmap.o wm8350-gpio.o obj-$(CONFIG_MFD_WM8350) += wm8350.o obj-$(CONFIG_MFD_WM8350_I2C) += wm8350-i2c.o +obj-$(CONFIG_TWL4030_CORE) += twl4030-core.o + obj-$(CONFIG_MFD_CORE) += mfd-core.o obj-$(CONFIG_MCP) += mcp-core.o diff --git a/drivers/mfd/da903x.c b/drivers/mfd/da903x.c new file mode 100644 index 000000000000..b57326ae464d --- /dev/null +++ b/drivers/mfd/da903x.c @@ -0,0 +1,563 @@ +/* + * Base driver for Dialog Semiconductor DA9030/DA9034 + * + * Copyright (C) 2008 Compulab, Ltd. + * Mike Rapoport <mike@compulab.co.il> + * + * Copyright (C) 2006-2008 Marvell International Ltd. + * Eric Miao <eric.miao@marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> +#include <linux/mfd/da903x.h> + +#define DA9030_CHIP_ID 0x00 +#define DA9030_EVENT_A 0x01 +#define DA9030_EVENT_B 0x02 +#define DA9030_EVENT_C 0x03 +#define DA9030_STATUS 0x04 +#define DA9030_IRQ_MASK_A 0x05 +#define DA9030_IRQ_MASK_B 0x06 +#define DA9030_IRQ_MASK_C 0x07 +#define DA9030_SYS_CTRL_A 0x08 +#define DA9030_SYS_CTRL_B 0x09 +#define DA9030_FAULT_LOG 0x0a + +#define DA9034_CHIP_ID 0x00 +#define DA9034_EVENT_A 0x01 +#define DA9034_EVENT_B 0x02 +#define DA9034_EVENT_C 0x03 +#define DA9034_EVENT_D 0x04 +#define DA9034_STATUS_A 0x05 +#define DA9034_STATUS_B 0x06 +#define DA9034_IRQ_MASK_A 0x07 +#define DA9034_IRQ_MASK_B 0x08 +#define DA9034_IRQ_MASK_C 0x09 +#define DA9034_IRQ_MASK_D 0x0a +#define DA9034_SYS_CTRL_A 0x0b +#define DA9034_SYS_CTRL_B 0x0c +#define DA9034_FAULT_LOG 0x0d + +struct da903x_chip; + +struct da903x_chip_ops { + int (*init_chip)(struct da903x_chip *); + int (*unmask_events)(struct da903x_chip *, unsigned int events); + int (*mask_events)(struct da903x_chip *, unsigned int events); + int (*read_events)(struct da903x_chip *, unsigned int *events); + int (*read_status)(struct da903x_chip *, unsigned int *status); +}; + +struct da903x_chip { + struct i2c_client *client; + struct device *dev; + struct da903x_chip_ops *ops; + + int type; + uint32_t events_mask; + + struct mutex lock; + struct work_struct irq_work; + + struct blocking_notifier_head notifier_list; +}; + +static inline int __da903x_read(struct i2c_client *client, + int reg, uint8_t *val) +{ + int ret; + + ret = i2c_smbus_read_byte_data(client, reg); + if (ret < 0) { + dev_err(&client->dev, "failed reading at 0x%02x\n", reg); + return ret; + } + + *val = (uint8_t)ret; + return 0; +} + +static inline int __da903x_reads(struct i2c_client *client, int reg, + int len, uint8_t *val) +{ + int ret; + + ret = i2c_smbus_read_i2c_block_data(client, reg, len, val); + if (ret < 0) { + dev_err(&client->dev, "failed reading from 0x%02x\n", reg); + return ret; + } + return 0; +} + +static inline int __da903x_write(struct i2c_client *client, + int reg, uint8_t val) +{ + int ret; + + ret = i2c_smbus_write_byte_data(client, reg, val); + if (ret < 0) { + dev_err(&client->dev, "failed writing 0x%02x to 0x%02x\n", + val, reg); + return ret; + } + return 0; +} + +static inline int __da903x_writes(struct i2c_client *client, int reg, + int len, uint8_t *val) +{ + int ret; + + ret = i2c_smbus_write_i2c_block_data(client, reg, len, val); + if (ret < 0) { + dev_err(&client->dev, "failed writings to 0x%02x\n", reg); + return ret; + } + return 0; +} + +int da903x_register_notifier(struct device *dev, struct notifier_block *nb, + unsigned int events) +{ + struct da903x_chip *chip = dev_get_drvdata(dev); + + chip->ops->unmask_events(chip, events); + return blocking_notifier_chain_register(&chip->notifier_list, nb); +} +EXPORT_SYMBOL_GPL(da903x_register_notifier); + +int da903x_unregister_notifier(struct device *dev, struct notifier_block *nb, + unsigned int events) +{ + struct da903x_chip *chip = dev_get_drvdata(dev); + + chip->ops->mask_events(chip, events); + return blocking_notifier_chain_unregister(&chip->notifier_list, nb); +} +EXPORT_SYMBOL_GPL(da903x_unregister_notifier); + +int da903x_write(struct device *dev, int reg, uint8_t val) +{ + return __da903x_write(to_i2c_client(dev), reg, val); +} +EXPORT_SYMBOL_GPL(da903x_write); + +int da903x_read(struct device *dev, int reg, uint8_t *val) +{ + return __da903x_read(to_i2c_client(dev), reg, val); +} +EXPORT_SYMBOL_GPL(da903x_read); + +int da903x_set_bits(struct device *dev, int reg, uint8_t bit_mask) +{ + struct da903x_chip *chip = dev_get_drvdata(dev); + uint8_t reg_val; + int ret = 0; + + mutex_lock(&chip->lock); + + ret = __da903x_read(chip->client, reg, ®_val); + if (ret) + goto out; + + if ((reg_val & bit_mask) == 0) { + reg_val |= bit_mask; + ret = __da903x_write(chip->client, reg, reg_val); + } +out: + mutex_unlock(&chip->lock); + return ret; +} +EXPORT_SYMBOL_GPL(da903x_set_bits); + +int da903x_clr_bits(struct device *dev, int reg, uint8_t bit_mask) +{ + struct da903x_chip *chip = dev_get_drvdata(dev); + uint8_t reg_val; + int ret = 0; + + mutex_lock(&chip->lock); + + ret = __da903x_read(chip->client, reg, ®_val); + if (ret) + goto out; + + if (reg_val & bit_mask) { + reg_val &= ~bit_mask; + ret = __da903x_write(chip->client, reg, reg_val); + } +out: + mutex_unlock(&chip->lock); + return ret; +} +EXPORT_SYMBOL_GPL(da903x_clr_bits); + +int da903x_update(struct device *dev, int reg, uint8_t val, uint8_t mask) +{ + struct da903x_chip *chip = dev_get_drvdata(dev); + uint8_t reg_val; + int ret = 0; + + mutex_lock(&chip->lock); + + ret = __da903x_read(chip->client, reg, ®_val); + if (ret) + goto out; + + if ((reg_val & mask) != val) { + reg_val = (reg_val & ~mask) | val; + ret = __da903x_write(chip->client, reg, reg_val); + } +out: + mutex_unlock(&chip->lock); + return ret; +} +EXPORT_SYMBOL_GPL(da903x_update); + +int da903x_query_status(struct device *dev, unsigned int sbits) +{ + struct da903x_chip *chip = dev_get_drvdata(dev); + unsigned int status = 0; + + chip->ops->read_status(chip, &status); + return ((status & sbits) == sbits); +} +EXPORT_SYMBOL(da903x_query_status); + +static int __devinit da9030_init_chip(struct da903x_chip *chip) +{ + uint8_t chip_id; + int err; + + err = __da903x_read(chip->client, DA9030_CHIP_ID, &chip_id); + if (err) + return err; + + err = __da903x_write(chip->client, DA9030_SYS_CTRL_A, 0xE8); + if (err) + return err; + + dev_info(chip->dev, "DA9030 (CHIP ID: 0x%02x) detected\n", chip_id); + return 0; +} + +static int da9030_unmask_events(struct da903x_chip *chip, unsigned int events) +{ + uint8_t v[3]; + + chip->events_mask &= ~events; + + v[0] = (chip->events_mask & 0xff); + v[1] = (chip->events_mask >> 8) & 0xff; + v[2] = (chip->events_mask >> 16) & 0xff; + + return __da903x_writes(chip->client, DA9030_IRQ_MASK_A, 3, v); +} + +static int da9030_mask_events(struct da903x_chip *chip, unsigned int events) +{ + uint8_t v[3]; + + chip->events_mask &= ~events; + + v[0] = (chip->events_mask & 0xff); + v[1] = (chip->events_mask >> 8) & 0xff; + v[2] = (chip->events_mask >> 16) & 0xff; + + return __da903x_writes(chip->client, DA9030_IRQ_MASK_A, 3, v); +} + +static int da9030_read_events(struct da903x_chip *chip, unsigned int *events) +{ + uint8_t v[3] = {0, 0, 0}; + int ret; + + ret = __da903x_reads(chip->client, DA9030_EVENT_A, 3, v); + if (ret < 0) + return ret; + + *events = (v[2] << 16) | (v[1] << 8) | v[0]; + return 0; +} + +static int da9030_read_status(struct da903x_chip *chip, unsigned int *status) +{ + return __da903x_read(chip->client, DA9030_STATUS, (uint8_t *)status); +} + +static int da9034_init_chip(struct da903x_chip *chip) +{ + uint8_t chip_id; + int err; + + err = __da903x_read(chip->client, DA9034_CHIP_ID, &chip_id); + if (err) + return err; + + err = __da903x_write(chip->client, DA9034_SYS_CTRL_A, 0xE8); + if (err) + return err; + + /* avoid SRAM power off during sleep*/ + __da903x_write(chip->client, 0x10, 0x07); + __da903x_write(chip->client, 0x11, 0xff); + __da903x_write(chip->client, 0x12, 0xff); + + /* Enable the ONKEY power down functionality */ + __da903x_write(chip->client, DA9034_SYS_CTRL_B, 0x20); + __da903x_write(chip->client, DA9034_SYS_CTRL_A, 0x60); + + /* workaround to make LEDs work */ + __da903x_write(chip->client, 0x90, 0x01); + __da903x_write(chip->client, 0xB0, 0x08); + + /* make ADTV1 and SDTV1 effective */ + __da903x_write(chip->client, 0x20, 0x00); + + dev_info(chip->dev, "DA9034 (CHIP ID: 0x%02x) detected\n", chip_id); + return 0; +} + +static int da9034_unmask_events(struct da903x_chip *chip, unsigned int events) +{ + uint8_t v[4]; + + chip->events_mask &= ~events; + + v[0] = (chip->events_mask & 0xff); + v[1] = (chip->events_mask >> 8) & 0xff; + v[2] = (chip->events_mask >> 16) & 0xff; + v[3] = (chip->events_mask >> 24) & 0xff; + + return __da903x_writes(chip->client, DA9034_IRQ_MASK_A, 4, v); +} + +static int da9034_mask_events(struct da903x_chip *chip, unsigned int events) +{ + uint8_t v[4]; + + chip->events_mask |= events; + + v[0] = (chip->events_mask & 0xff); + v[1] = (chip->events_mask >> 8) & 0xff; + v[2] = (chip->events_mask >> 16) & 0xff; + v[3] = (chip->events_mask >> 24) & 0xff; + + return __da903x_writes(chip->client, DA9034_IRQ_MASK_A, 4, v); +} + +static int da9034_read_events(struct da903x_chip *chip, unsigned int *events) +{ + uint8_t v[4] = {0, 0, 0, 0}; + int ret; + + ret = __da903x_reads(chip->client, DA9034_EVENT_A, 4, v); + if (ret < 0) + return ret; + + *events = (v[3] << 24) | (v[2] << 16) | (v[1] << 8) | v[0]; + return 0; +} + +static int da9034_read_status(struct da903x_chip *chip, unsigned int *status) +{ + uint8_t v[2] = {0, 0}; + int ret = 0; + + ret = __da903x_reads(chip->client, DA9034_STATUS_A, 2, v); + if (ret) + return ret; + + *status = (v[1] << 8) | v[0]; + return 0; +} + +static void da903x_irq_work(struct work_struct *work) +{ + struct da903x_chip *chip = + container_of(work, struct da903x_chip, irq_work); + unsigned int events = 0; + + while (1) { + if (chip->ops->read_events(chip, &events)) + break; + + events &= ~chip->events_mask; + if (events == 0) + break; + + blocking_notifier_call_chain( + &chip->notifier_list, events, NULL); + } + enable_irq(chip->client->irq); +} + +static int da903x_irq_handler(int irq, void *data) +{ + struct da903x_chip *chip = data; + + disable_irq_nosync(irq); + (void)schedule_work(&chip->irq_work); + + return IRQ_HANDLED; +} + +static struct da903x_chip_ops da903x_ops[] = { + [0] = { + .init_chip = da9030_init_chip, + .unmask_events = da9030_unmask_events, + .mask_events = da9030_mask_events, + .read_events = da9030_read_events, + .read_status = da9030_read_status, + }, + [1] = { + .init_chip = da9034_init_chip, + .unmask_events = da9034_unmask_events, + .mask_events = da9034_mask_events, + .read_events = da9034_read_events, + .read_status = da9034_read_status, + } +}; + +static const struct i2c_device_id da903x_id_table[] = { + { "da9030", 0 }, + { "da9034", 1 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, da903x_id_table); + +static int __devexit __remove_subdev(struct device *dev, void *unused) +{ + platform_device_unregister(to_platform_device(dev)); + return 0; +} + +static int __devexit da903x_remove_subdevs(struct da903x_chip *chip) +{ + return device_for_each_child(chip->dev, NULL, __remove_subdev); +} + +static int __devinit da903x_add_subdevs(struct da903x_chip *chip, + struct da903x_platform_data *pdata) +{ + struct da903x_subdev_info *subdev; + struct platform_device *pdev; + int i, ret = 0; + + for (i = 0; i < pdata->num_subdevs; i++) { + subdev = &pdata->subdevs[i]; + + pdev = platform_device_alloc(subdev->name, subdev->id); + + pdev->dev.parent = chip->dev; + pdev->dev.platform_data = subdev->platform_data; + + ret = platform_device_add(pdev); + if (ret) + goto failed; + } + return 0; + +failed: + da903x_remove_subdevs(chip); + return ret; +} + +static int __devinit da903x_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct da903x_platform_data *pdata = client->dev.platform_data; + struct da903x_chip *chip; + unsigned int tmp; + int ret; + + chip = kzalloc(sizeof(struct da903x_chip), GFP_KERNEL); + if (chip == NULL) + return -ENOMEM; + + chip->client = client; + chip->dev = &client->dev; + chip->ops = &da903x_ops[id->driver_data]; + + mutex_init(&chip->lock); + INIT_WORK(&chip->irq_work, da903x_irq_work); + BLOCKING_INIT_NOTIFIER_HEAD(&chip->notifier_list); + + i2c_set_clientdata(client, chip); + + ret = chip->ops->init_chip(chip); + if (ret) + goto out_free_chip; + + /* mask and clear all IRQs */ + chip->events_mask = 0xffffffff; + chip->ops->mask_events(chip, chip->events_mask); + chip->ops->read_events(chip, &tmp); + + ret = request_irq(client->irq, da903x_irq_handler, + IRQF_DISABLED | IRQF_TRIGGER_FALLING, + "da903x", chip); + if (ret) { + dev_err(&client->dev, "failed to request irq %d\n", + client->irq); + goto out_free_chip; + } + + ret = da903x_add_subdevs(chip, pdata); + if (ret) + goto out_free_irq; + + return 0; + +out_free_irq: + free_irq(client->irq, chip); +out_free_chip: + i2c_set_clientdata(client, NULL); + kfree(chip); + return ret; +} + +static int __devexit da903x_remove(struct i2c_client *client) +{ + struct da903x_chip *chip = i2c_get_clientdata(client); + + da903x_remove_subdevs(chip); + kfree(chip); + return 0; +} + +static struct i2c_driver da903x_driver = { + .driver = { + .name = "da903x", + .owner = THIS_MODULE, + }, + .probe = da903x_probe, + .remove = __devexit_p(da903x_remove), + .id_table = da903x_id_table, +}; + +static int __init da903x_init(void) +{ + return i2c_add_driver(&da903x_driver); +} +module_init(da903x_init); + +static void __exit da903x_exit(void) +{ + i2c_del_driver(&da903x_driver); +} +module_exit(da903x_exit); + +MODULE_DESCRIPTION("PMIC Driver for Dialog Semiconductor DA9034"); +MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>" + "Mike Rapoport <mike@compulab.co.il>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/htc-egpio.c b/drivers/mfd/htc-egpio.c index 6be43172dc65..50dff6e0088d 100644 --- a/drivers/mfd/htc-egpio.c +++ b/drivers/mfd/htc-egpio.c @@ -289,7 +289,7 @@ static int __init egpio_probe(struct platform_device *pdev) ei->base_addr = ioremap_nocache(res->start, res->end - res->start); if (!ei->base_addr) goto fail; - pr_debug("EGPIO phys=%08x virt=%p\n", res->start, ei->base_addr); + pr_debug("EGPIO phys=%08x virt=%p\n", (u32)res->start, ei->base_addr); if ((pdata->bus_width != 16) && (pdata->bus_width != 32)) goto fail; diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c index 9c9c126ed334..6c0d1bec4b76 100644 --- a/drivers/mfd/mfd-core.c +++ b/drivers/mfd/mfd-core.c @@ -20,7 +20,7 @@ static int mfd_add_device(struct device *parent, int id, struct resource *mem_base, int irq_base) { - struct resource res[cell->num_resources]; + struct resource *res; struct platform_device *pdev; int ret = -ENOMEM; int r; @@ -29,14 +29,17 @@ static int mfd_add_device(struct device *parent, int id, if (!pdev) goto fail_alloc; + res = kzalloc(sizeof(*res) * cell->num_resources, GFP_KERNEL); + if (!res) + goto fail_device; + pdev->dev.parent = parent; ret = platform_device_add_data(pdev, cell->platform_data, cell->data_size); if (ret) - goto fail_device; + goto fail_res; - memset(res, 0, sizeof(res)); for (r = 0; r < cell->num_resources; r++) { res[r].name = cell->resources[r].name; res[r].flags = cell->resources[r].flags; @@ -64,11 +67,15 @@ static int mfd_add_device(struct device *parent, int id, ret = platform_device_add(pdev); if (ret) - goto fail_device; + goto fail_res; + + kfree(res); return 0; /* platform_device_del(pdev); */ +fail_res: + kfree(res); fail_device: platform_device_put(pdev); fail_alloc: diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c index 7aebad4c06ff..220e4371266b 100644 --- a/drivers/mfd/sm501.c +++ b/drivers/mfd/sm501.c @@ -623,8 +623,8 @@ unsigned long sm501_set_clock(struct device *dev, sm501_sync_regs(sm); - dev_info(sm->dev, "gate %08lx, clock %08lx, mode %08lx\n", - gate, clock, mode); + dev_dbg(sm->dev, "gate %08lx, clock %08lx, mode %08lx\n", + gate, clock, mode); sm501_mdelay(sm, 16); mutex_unlock(&sm->clock_lock); @@ -742,7 +742,7 @@ static int sm501_register_device(struct sm501_devdata *sm, int ret; for (ptr = 0; ptr < pdev->num_resources; ptr++) { - printk("%s[%d] flags %08lx: %08llx..%08llx\n", + printk(KERN_DEBUG "%s[%d] flags %08lx: %08llx..%08llx\n", pdev->name, ptr, pdev->resource[ptr].flags, (unsigned long long)pdev->resource[ptr].start, diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c index 49a0fffc02af..9f7024c0f8ec 100644 --- a/drivers/mfd/t7l66xb.c +++ b/drivers/mfd/t7l66xb.c @@ -24,8 +24,10 @@ #include <linux/kernel.h> #include <linux/module.h> +#include <linux/err.h> #include <linux/io.h> #include <linux/irq.h> +#include <linux/clk.h> #include <linux/platform_device.h> #include <linux/mfd/core.h> #include <linux/mfd/tmio.h> @@ -56,6 +58,8 @@ struct t7l66xb { spinlock_t lock; struct resource rscr; + struct clk *clk48m; + struct clk *clk32k; int irq; int irq_base; }; @@ -65,13 +69,11 @@ struct t7l66xb { static int t7l66xb_mmc_enable(struct platform_device *mmc) { struct platform_device *dev = to_platform_device(mmc->dev.parent); - struct t7l66xb_platform_data *pdata = dev->dev.platform_data; struct t7l66xb *t7l66xb = platform_get_drvdata(dev); unsigned long flags; u8 dev_ctl; - if (pdata->enable_clk32k) - pdata->enable_clk32k(dev); + clk_enable(t7l66xb->clk32k); spin_lock_irqsave(&t7l66xb->lock, flags); @@ -87,7 +89,6 @@ static int t7l66xb_mmc_enable(struct platform_device *mmc) static int t7l66xb_mmc_disable(struct platform_device *mmc) { struct platform_device *dev = to_platform_device(mmc->dev.parent); - struct t7l66xb_platform_data *pdata = dev->dev.platform_data; struct t7l66xb *t7l66xb = platform_get_drvdata(dev); unsigned long flags; u8 dev_ctl; @@ -100,8 +101,7 @@ static int t7l66xb_mmc_disable(struct platform_device *mmc) spin_unlock_irqrestore(&t7l66xb->lock, flags); - if (pdata->disable_clk32k) - pdata->disable_clk32k(dev); + clk_disable(t7l66xb->clk32k); return 0; } @@ -258,18 +258,22 @@ static void t7l66xb_detach_irq(struct platform_device *dev) #ifdef CONFIG_PM static int t7l66xb_suspend(struct platform_device *dev, pm_message_t state) { + struct t7l66xb *t7l66xb = platform_get_drvdata(dev); struct t7l66xb_platform_data *pdata = dev->dev.platform_data; if (pdata && pdata->suspend) pdata->suspend(dev); + clk_disable(t7l66xb->clk48m); return 0; } static int t7l66xb_resume(struct platform_device *dev) { + struct t7l66xb *t7l66xb = platform_get_drvdata(dev); struct t7l66xb_platform_data *pdata = dev->dev.platform_data; + clk_enable(t7l66xb->clk48m); if (pdata && pdata->resume) pdata->resume(dev); @@ -309,6 +313,19 @@ static int t7l66xb_probe(struct platform_device *dev) t7l66xb->irq_base = pdata->irq_base; + t7l66xb->clk32k = clk_get(&dev->dev, "CLK_CK32K"); + if (IS_ERR(t7l66xb->clk32k)) { + ret = PTR_ERR(t7l66xb->clk32k); + goto err_clk32k_get; + } + + t7l66xb->clk48m = clk_get(&dev->dev, "CLK_CK48M"); + if (IS_ERR(t7l66xb->clk48m)) { + ret = PTR_ERR(t7l66xb->clk48m); + clk_put(t7l66xb->clk32k); + goto err_clk48m_get; + } + rscr = &t7l66xb->rscr; rscr->name = "t7l66xb-core"; rscr->start = iomem->start; @@ -325,6 +342,8 @@ static int t7l66xb_probe(struct platform_device *dev) goto err_ioremap; } + clk_enable(t7l66xb->clk48m); + if (pdata && pdata->enable) pdata->enable(dev); @@ -359,9 +378,13 @@ static int t7l66xb_probe(struct platform_device *dev) iounmap(t7l66xb->scr); err_ioremap: release_resource(&t7l66xb->rscr); -err_noirq: err_request_scr: kfree(t7l66xb); + clk_put(t7l66xb->clk48m); +err_clk48m_get: + clk_put(t7l66xb->clk32k); +err_clk32k_get: +err_noirq: return ret; } @@ -372,7 +395,8 @@ static int t7l66xb_remove(struct platform_device *dev) int ret; ret = pdata->disable(dev); - + clk_disable(t7l66xb->clk48m); + clk_put(t7l66xb->clk48m); t7l66xb_detach_irq(dev); iounmap(t7l66xb->scr); release_resource(&t7l66xb->rscr); diff --git a/drivers/mfd/tc6387xb.c b/drivers/mfd/tc6387xb.c index a22b21ac6cf8..43222c12fec1 100644 --- a/drivers/mfd/tc6387xb.c +++ b/drivers/mfd/tc6387xb.c @@ -12,6 +12,7 @@ #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/clk.h> #include <linux/err.h> #include <linux/mfd/core.h> #include <linux/mfd/tmio.h> @@ -24,18 +25,22 @@ enum { #ifdef CONFIG_PM static int tc6387xb_suspend(struct platform_device *dev, pm_message_t state) { - struct tc6387xb_platform_data *pdata = platform_get_drvdata(dev); + struct clk *clk32k = platform_get_drvdata(dev); + struct tc6387xb_platform_data *pdata = dev->dev.platform_data; if (pdata && pdata->suspend) pdata->suspend(dev); + clk_disable(clk32k); return 0; } static int tc6387xb_resume(struct platform_device *dev) { - struct tc6387xb_platform_data *pdata = platform_get_drvdata(dev); + struct clk *clk32k = platform_get_drvdata(dev); + struct tc6387xb_platform_data *pdata = dev->dev.platform_data; + clk_enable(clk32k); if (pdata && pdata->resume) pdata->resume(dev); @@ -51,10 +56,9 @@ static int tc6387xb_resume(struct platform_device *dev) static int tc6387xb_mmc_enable(struct platform_device *mmc) { struct platform_device *dev = to_platform_device(mmc->dev.parent); - struct tc6387xb_platform_data *tc6387xb = dev->dev.platform_data; + struct clk *clk32k = platform_get_drvdata(dev); - if (tc6387xb->enable_clk32k) - tc6387xb->enable_clk32k(dev); + clk_enable(clk32k); return 0; } @@ -62,10 +66,9 @@ static int tc6387xb_mmc_enable(struct platform_device *mmc) static int tc6387xb_mmc_disable(struct platform_device *mmc) { struct platform_device *dev = to_platform_device(mmc->dev.parent); - struct tc6387xb_platform_data *tc6387xb = dev->dev.platform_data; + struct clk *clk32k = platform_get_drvdata(dev); - if (tc6387xb->disable_clk32k) - tc6387xb->disable_clk32k(dev); + clk_disable(clk32k); return 0; } @@ -102,14 +105,14 @@ static struct mfd_cell tc6387xb_cells[] = { static int tc6387xb_probe(struct platform_device *dev) { - struct tc6387xb_platform_data *data = platform_get_drvdata(dev); + struct tc6387xb_platform_data *pdata = dev->dev.platform_data; struct resource *iomem; + struct clk *clk32k; int irq, ret; iomem = platform_get_resource(dev, IORESOURCE_MEM, 0); if (!iomem) { - ret = -EINVAL; - goto err_resource; + return -EINVAL; } ret = platform_get_irq(dev, 0); @@ -118,8 +121,15 @@ static int tc6387xb_probe(struct platform_device *dev) else goto err_resource; - if (data && data->enable) - data->enable(dev); + clk32k = clk_get(&dev->dev, "CLK_CK32K"); + if (IS_ERR(clk32k)) { + ret = PTR_ERR(clk32k); + goto err_resource; + } + platform_set_drvdata(dev, clk32k); + + if (pdata && pdata->enable) + pdata->enable(dev); printk(KERN_INFO "Toshiba tc6387xb initialised\n"); @@ -134,18 +144,19 @@ static int tc6387xb_probe(struct platform_device *dev) if (!ret) return 0; + clk_put(clk32k); err_resource: return ret; } static int tc6387xb_remove(struct platform_device *dev) { - struct tc6387xb_platform_data *data = platform_get_drvdata(dev); - - if (data && data->disable) - data->disable(dev); + struct clk *clk32k = platform_get_drvdata(dev); - /* FIXME - free the resources! */ + mfd_remove_devices(&dev->dev); + clk_disable(clk32k); + clk_put(clk32k); + platform_set_drvdata(dev, NULL); return 0; } diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c index e4c1c788b5f8..f856e9463a9f 100644 --- a/drivers/mfd/tc6393xb.c +++ b/drivers/mfd/tc6393xb.c @@ -113,6 +113,8 @@ struct tc6393xb { enum { TC6393XB_CELL_NAND, TC6393XB_CELL_MMC, + TC6393XB_CELL_OHCI, + TC6393XB_CELL_FB, }; /*--------------------------------------------------------------------------*/ @@ -170,6 +172,176 @@ static struct resource __devinitdata tc6393xb_mmc_resources[] = { }, }; +const static struct resource tc6393xb_ohci_resources[] = { + { + .start = 0x3000, + .end = 0x31ff, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x0300, + .end = 0x03ff, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x010000, + .end = 0x017fff, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x018000, + .end = 0x01ffff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_TC6393_OHCI, + .end = IRQ_TC6393_OHCI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource __devinitdata tc6393xb_fb_resources[] = { + { + .start = 0x5000, + .end = 0x51ff, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x0500, + .end = 0x05ff, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x100000, + .end = 0x1fffff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_TC6393_FB, + .end = IRQ_TC6393_FB, + .flags = IORESOURCE_IRQ, + }, +}; + +static int tc6393xb_ohci_enable(struct platform_device *dev) +{ + struct tc6393xb *tc6393xb = dev_get_drvdata(dev->dev.parent); + unsigned long flags; + u16 ccr; + u8 fer; + + spin_lock_irqsave(&tc6393xb->lock, flags); + + ccr = tmio_ioread16(tc6393xb->scr + SCR_CCR); + ccr |= SCR_CCR_USBCK; + tmio_iowrite16(ccr, tc6393xb->scr + SCR_CCR); + + fer = tmio_ioread8(tc6393xb->scr + SCR_FER); + fer |= SCR_FER_USBEN; + tmio_iowrite8(fer, tc6393xb->scr + SCR_FER); + + spin_unlock_irqrestore(&tc6393xb->lock, flags); + + return 0; +} + +static int tc6393xb_ohci_disable(struct platform_device *dev) +{ + struct tc6393xb *tc6393xb = dev_get_drvdata(dev->dev.parent); + unsigned long flags; + u16 ccr; + u8 fer; + + spin_lock_irqsave(&tc6393xb->lock, flags); + + fer = tmio_ioread8(tc6393xb->scr + SCR_FER); + fer &= ~SCR_FER_USBEN; + tmio_iowrite8(fer, tc6393xb->scr + SCR_FER); + + ccr = tmio_ioread16(tc6393xb->scr + SCR_CCR); + ccr &= ~SCR_CCR_USBCK; + tmio_iowrite16(ccr, tc6393xb->scr + SCR_CCR); + + spin_unlock_irqrestore(&tc6393xb->lock, flags); + + return 0; +} + +static int tc6393xb_fb_enable(struct platform_device *dev) +{ + struct tc6393xb *tc6393xb = dev_get_drvdata(dev->dev.parent); + unsigned long flags; + u16 ccr; + + spin_lock_irqsave(&tc6393xb->lock, flags); + + ccr = tmio_ioread16(tc6393xb->scr + SCR_CCR); + ccr &= ~SCR_CCR_MCLK_MASK; + ccr |= SCR_CCR_MCLK_48; + tmio_iowrite16(ccr, tc6393xb->scr + SCR_CCR); + + spin_unlock_irqrestore(&tc6393xb->lock, flags); + + return 0; +} + +static int tc6393xb_fb_disable(struct platform_device *dev) +{ + struct tc6393xb *tc6393xb = dev_get_drvdata(dev->dev.parent); + unsigned long flags; + u16 ccr; + + spin_lock_irqsave(&tc6393xb->lock, flags); + + ccr = tmio_ioread16(tc6393xb->scr + SCR_CCR); + ccr &= ~SCR_CCR_MCLK_MASK; + ccr |= SCR_CCR_MCLK_OFF; + tmio_iowrite16(ccr, tc6393xb->scr + SCR_CCR); + + spin_unlock_irqrestore(&tc6393xb->lock, flags); + + return 0; +} + +int tc6393xb_lcd_set_power(struct platform_device *fb, bool on) +{ + struct platform_device *dev = to_platform_device(fb->dev.parent); + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + u8 fer; + unsigned long flags; + + spin_lock_irqsave(&tc6393xb->lock, flags); + + fer = ioread8(tc6393xb->scr + SCR_FER); + if (on) + fer |= SCR_FER_SLCDEN; + else + fer &= ~SCR_FER_SLCDEN; + iowrite8(fer, tc6393xb->scr + SCR_FER); + + spin_unlock_irqrestore(&tc6393xb->lock, flags); + + return 0; +} +EXPORT_SYMBOL(tc6393xb_lcd_set_power); + +int tc6393xb_lcd_mode(struct platform_device *fb, + const struct fb_videomode *mode) { + struct platform_device *dev = to_platform_device(fb->dev.parent); + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + unsigned long flags; + + spin_lock_irqsave(&tc6393xb->lock, flags); + + iowrite16(mode->pixclock, tc6393xb->scr + SCR_PLL1CR + 0); + iowrite16(mode->pixclock >> 16, tc6393xb->scr + SCR_PLL1CR + 2); + + spin_unlock_irqrestore(&tc6393xb->lock, flags); + + return 0; +} +EXPORT_SYMBOL(tc6393xb_lcd_mode); + static struct mfd_cell __devinitdata tc6393xb_cells[] = { [TC6393XB_CELL_NAND] = { .name = "tmio-nand", @@ -182,6 +354,24 @@ static struct mfd_cell __devinitdata tc6393xb_cells[] = { .num_resources = ARRAY_SIZE(tc6393xb_mmc_resources), .resources = tc6393xb_mmc_resources, }, + [TC6393XB_CELL_OHCI] = { + .name = "tmio-ohci", + .num_resources = ARRAY_SIZE(tc6393xb_ohci_resources), + .resources = tc6393xb_ohci_resources, + .enable = tc6393xb_ohci_enable, + .suspend = tc6393xb_ohci_disable, + .resume = tc6393xb_ohci_enable, + .disable = tc6393xb_ohci_disable, + }, + [TC6393XB_CELL_FB] = { + .name = "tmio-fb", + .num_resources = ARRAY_SIZE(tc6393xb_fb_resources), + .resources = tc6393xb_fb_resources, + .enable = tc6393xb_fb_enable, + .suspend = tc6393xb_fb_disable, + .resume = tc6393xb_fb_enable, + .disable = tc6393xb_fb_disable, + }, }; /*--------------------------------------------------------------------------*/ @@ -369,41 +559,12 @@ static void tc6393xb_detach_irq(struct platform_device *dev) /*--------------------------------------------------------------------------*/ -static int tc6393xb_hw_init(struct platform_device *dev) -{ - struct tc6393xb_platform_data *tcpd = dev->dev.platform_data; - struct tc6393xb *tc6393xb = platform_get_drvdata(dev); - int i; - - iowrite8(tc6393xb->suspend_state.fer, tc6393xb->scr + SCR_FER); - iowrite16(tcpd->scr_pll2cr, tc6393xb->scr + SCR_PLL2CR); - iowrite16(tc6393xb->suspend_state.ccr, tc6393xb->scr + SCR_CCR); - iowrite16(SCR_MCR_RDY_OPENDRAIN | SCR_MCR_RDY_UNK | SCR_MCR_RDY_EN | - SCR_MCR_INT_OPENDRAIN | SCR_MCR_INT_UNK | SCR_MCR_INT_EN | - BIT(15), tc6393xb->scr + SCR_MCR); - iowrite16(tcpd->scr_gper, tc6393xb->scr + SCR_GPER); - iowrite8(0, tc6393xb->scr + SCR_IRR); - iowrite8(0xbf, tc6393xb->scr + SCR_IMR); - - for (i = 0; i < 3; i++) { - iowrite8(tc6393xb->suspend_state.gpo_dsr[i], - tc6393xb->scr + SCR_GPO_DSR(i)); - iowrite8(tc6393xb->suspend_state.gpo_doecr[i], - tc6393xb->scr + SCR_GPO_DOECR(i)); - iowrite8(tc6393xb->suspend_state.gpi_bcr[i], - tc6393xb->scr + SCR_GPI_BCR(i)); - } - - return 0; -} - static int __devinit tc6393xb_probe(struct platform_device *dev) { struct tc6393xb_platform_data *tcpd = dev->dev.platform_data; struct tc6393xb *tc6393xb; struct resource *iomem, *rscr; int ret, temp; - int i; iomem = platform_get_resource(dev, IORESOURCE_MEM, 0); if (!iomem) @@ -458,21 +619,16 @@ static int __devinit tc6393xb_probe(struct platform_device *dev) if (ret) goto err_enable; - tc6393xb->suspend_state.fer = 0; - - for (i = 0; i < 3; i++) { - tc6393xb->suspend_state.gpo_dsr[i] = - (tcpd->scr_gpo_dsr >> (8 * i)) & 0xff; - tc6393xb->suspend_state.gpo_doecr[i] = - (tcpd->scr_gpo_doecr >> (8 * i)) & 0xff; - } - - tc6393xb->suspend_state.ccr = SCR_CCR_UNK1 | - SCR_CCR_HCLK_48; - - ret = tc6393xb_hw_init(dev); - if (ret) - goto err_hw_init; + iowrite8(0, tc6393xb->scr + SCR_FER); + iowrite16(tcpd->scr_pll2cr, tc6393xb->scr + SCR_PLL2CR); + iowrite16(SCR_CCR_UNK1 | SCR_CCR_HCLK_48, + tc6393xb->scr + SCR_CCR); + iowrite16(SCR_MCR_RDY_OPENDRAIN | SCR_MCR_RDY_UNK | SCR_MCR_RDY_EN | + SCR_MCR_INT_OPENDRAIN | SCR_MCR_INT_UNK | SCR_MCR_INT_EN | + BIT(15), tc6393xb->scr + SCR_MCR); + iowrite16(tcpd->scr_gper, tc6393xb->scr + SCR_GPER); + iowrite8(0, tc6393xb->scr + SCR_IRR); + iowrite8(0xbf, tc6393xb->scr + SCR_IMR); printk(KERN_INFO "Toshiba tc6393xb revision %d at 0x%08lx, irq %d\n", tmio_ioread8(tc6393xb->scr + SCR_REVID), @@ -488,16 +644,33 @@ static int __devinit tc6393xb_probe(struct platform_device *dev) tc6393xb_attach_irq(dev); + if (tcpd->setup) { + ret = tcpd->setup(dev); + if (ret) + goto err_setup; + } + tc6393xb_cells[TC6393XB_CELL_NAND].driver_data = tcpd->nand_data; tc6393xb_cells[TC6393XB_CELL_NAND].platform_data = &tc6393xb_cells[TC6393XB_CELL_NAND]; tc6393xb_cells[TC6393XB_CELL_NAND].data_size = sizeof(tc6393xb_cells[TC6393XB_CELL_NAND]); + tc6393xb_cells[TC6393XB_CELL_MMC].platform_data = &tc6393xb_cells[TC6393XB_CELL_MMC]; tc6393xb_cells[TC6393XB_CELL_MMC].data_size = sizeof(tc6393xb_cells[TC6393XB_CELL_MMC]); + tc6393xb_cells[TC6393XB_CELL_OHCI].platform_data = + &tc6393xb_cells[TC6393XB_CELL_OHCI]; + tc6393xb_cells[TC6393XB_CELL_OHCI].data_size = + sizeof(tc6393xb_cells[TC6393XB_CELL_OHCI]); + + tc6393xb_cells[TC6393XB_CELL_FB].driver_data = tcpd->fb_data; + tc6393xb_cells[TC6393XB_CELL_FB].platform_data = + &tc6393xb_cells[TC6393XB_CELL_FB]; + tc6393xb_cells[TC6393XB_CELL_FB].data_size = + sizeof(tc6393xb_cells[TC6393XB_CELL_FB]); ret = mfd_add_devices(&dev->dev, dev->id, tc6393xb_cells, ARRAY_SIZE(tc6393xb_cells), @@ -506,12 +679,15 @@ static int __devinit tc6393xb_probe(struct platform_device *dev) if (!ret) return 0; + if (tcpd->teardown) + tcpd->teardown(dev); + +err_setup: tc6393xb_detach_irq(dev); err_gpio_add: if (tc6393xb->gpio.base != -1) temp = gpiochip_remove(&tc6393xb->gpio); -err_hw_init: tcpd->disable(dev); err_clk_enable: clk_disable(tc6393xb->clk); @@ -535,6 +711,10 @@ static int __devexit tc6393xb_remove(struct platform_device *dev) int ret; mfd_remove_devices(&dev->dev); + + if (tcpd->teardown) + tcpd->teardown(dev); + tc6393xb_detach_irq(dev); if (tc6393xb->gpio.base != -1) { @@ -585,15 +765,37 @@ static int tc6393xb_resume(struct platform_device *dev) struct tc6393xb_platform_data *tcpd = dev->dev.platform_data; struct tc6393xb *tc6393xb = platform_get_drvdata(dev); int ret; + int i; clk_enable(tc6393xb->clk); ret = tcpd->resume(dev); - if (ret) return ret; - return tc6393xb_hw_init(dev); + if (!tcpd->resume_restore) + return 0; + + iowrite8(tc6393xb->suspend_state.fer, tc6393xb->scr + SCR_FER); + iowrite16(tcpd->scr_pll2cr, tc6393xb->scr + SCR_PLL2CR); + iowrite16(tc6393xb->suspend_state.ccr, tc6393xb->scr + SCR_CCR); + iowrite16(SCR_MCR_RDY_OPENDRAIN | SCR_MCR_RDY_UNK | SCR_MCR_RDY_EN | + SCR_MCR_INT_OPENDRAIN | SCR_MCR_INT_UNK | SCR_MCR_INT_EN | + BIT(15), tc6393xb->scr + SCR_MCR); + iowrite16(tcpd->scr_gper, tc6393xb->scr + SCR_GPER); + iowrite8(0, tc6393xb->scr + SCR_IRR); + iowrite8(0xbf, tc6393xb->scr + SCR_IMR); + + for (i = 0; i < 3; i++) { + iowrite8(tc6393xb->suspend_state.gpo_dsr[i], + tc6393xb->scr + SCR_GPO_DSR(i)); + iowrite8(tc6393xb->suspend_state.gpo_doecr[i], + tc6393xb->scr + SCR_GPO_DOECR(i)); + iowrite8(tc6393xb->suspend_state.gpi_bcr[i], + tc6393xb->scr + SCR_GPI_BCR(i)); + } + + return 0; } #else #define tc6393xb_suspend NULL diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c new file mode 100644 index 000000000000..fd9a0160202c --- /dev/null +++ b/drivers/mfd/twl4030-core.c @@ -0,0 +1,1193 @@ +/* + * twl4030_core.c - driver for TWL4030/TPS659x0 PM and audio CODEC devices + * + * Copyright (C) 2005-2006 Texas Instruments, Inc. + * + * Modifications to defer interrupt handling to a kernel thread: + * Copyright (C) 2006 MontaVista Software, Inc. + * + * Based on tlv320aic23.c: + * Copyright (c) by Kai Svahn <kai.svahn@nokia.com> + * + * Code cleanup and modifications to IRQ handler. + * by syed khasim <x0khasim@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel_stat.h> +#include <linux/init.h> +#include <linux/mutex.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/random.h> +#include <linux/kthread.h> +#include <linux/platform_device.h> +#include <linux/clk.h> + +#include <linux/i2c.h> +#include <linux/i2c/twl4030.h> + + +/* + * The TWL4030 "Triton 2" is one of a family of a multi-function "Power + * Management and System Companion Device" chips originally designed for + * use in OMAP2 and OMAP 3 based systems. Its control interfaces use I2C, + * often at around 3 Mbit/sec, including for interrupt handling. + * + * This driver core provides genirq support for the interrupts emitted, + * by the various modules, and exports register access primitives. + * + * FIXME this driver currently requires use of the first interrupt line + * (and associated registers). + */ + +#define DRIVER_NAME "twl4030" + +#if defined(CONFIG_TWL4030_BCI_BATTERY) || \ + defined(CONFIG_TWL4030_BCI_BATTERY_MODULE) +#define twl_has_bci() true +#else +#define twl_has_bci() false +#endif + +#if defined(CONFIG_KEYBOARD_TWL4030) || defined(CONFIG_KEYBOARD_TWL4030_MODULE) +#define twl_has_keypad() true +#else +#define twl_has_keypad() false +#endif + +#if defined(CONFIG_GPIO_TWL4030) || defined(CONFIG_GPIO_TWL4030_MODULE) +#define twl_has_gpio() true +#else +#define twl_has_gpio() false +#endif + +#if defined(CONFIG_TWL4030_MADC) || defined(CONFIG_TWL4030_MADC_MODULE) +#define twl_has_madc() true +#else +#define twl_has_madc() false +#endif + +#if defined(CONFIG_RTC_DRV_TWL4030) || defined(CONFIG_RTC_DRV_TWL4030_MODULE) +#define twl_has_rtc() true +#else +#define twl_has_rtc() false +#endif + +#if defined(CONFIG_TWL4030_USB) || defined(CONFIG_TWL4030_USB_MODULE) +#define twl_has_usb() true +#else +#define twl_has_usb() false +#endif + +static inline void activate_irq(int irq) +{ +#ifdef CONFIG_ARM + /* ARM requires an extra step to clear IRQ_NOREQUEST, which it + * sets on behalf of every irq_chip. Also sets IRQ_NOPROBE. + */ + set_irq_flags(irq, IRQF_VALID); +#else + /* same effect on other architectures */ + set_irq_noprobe(irq); +#endif +} + +/* Primary Interrupt Handler on TWL4030 Registers */ + +/* Register Definitions */ + +#define REG_PIH_ISR_P1 (0x1) +#define REG_PIH_ISR_P2 (0x2) +#define REG_PIH_SIR (0x3) + +/* Triton Core internal information (BEGIN) */ + +/* Last - for index max*/ +#define TWL4030_MODULE_LAST TWL4030_MODULE_SECURED_REG + +#define TWL4030_NUM_SLAVES 4 + + +/* Base Address defns for twl4030_map[] */ + +/* subchip/slave 0 - USB ID */ +#define TWL4030_BASEADD_USB 0x0000 + +/* subchip/slave 1 - AUD ID */ +#define TWL4030_BASEADD_AUDIO_VOICE 0x0000 +#define TWL4030_BASEADD_GPIO 0x0098 +#define TWL4030_BASEADD_INTBR 0x0085 +#define TWL4030_BASEADD_PIH 0x0080 +#define TWL4030_BASEADD_TEST 0x004C + +/* subchip/slave 2 - AUX ID */ +#define TWL4030_BASEADD_INTERRUPTS 0x00B9 +#define TWL4030_BASEADD_LED 0x00EE +#define TWL4030_BASEADD_MADC 0x0000 +#define TWL4030_BASEADD_MAIN_CHARGE 0x0074 +#define TWL4030_BASEADD_PRECHARGE 0x00AA +#define TWL4030_BASEADD_PWM0 0x00F8 +#define TWL4030_BASEADD_PWM1 0x00FB +#define TWL4030_BASEADD_PWMA 0x00EF +#define TWL4030_BASEADD_PWMB 0x00F1 +#define TWL4030_BASEADD_KEYPAD 0x00D2 + +/* subchip/slave 3 - POWER ID */ +#define TWL4030_BASEADD_BACKUP 0x0014 +#define TWL4030_BASEADD_INT 0x002E +#define TWL4030_BASEADD_PM_MASTER 0x0036 +#define TWL4030_BASEADD_PM_RECEIVER 0x005B +#define TWL4030_BASEADD_RTC 0x001C +#define TWL4030_BASEADD_SECURED_REG 0x0000 + +/* Triton Core internal information (END) */ + + +/* Few power values */ +#define R_CFG_BOOT 0x05 +#define R_PROTECT_KEY 0x0E + +/* access control values for R_PROTECT_KEY */ +#define KEY_UNLOCK1 0xce +#define KEY_UNLOCK2 0xec +#define KEY_LOCK 0x00 + +/* some fields in R_CFG_BOOT */ +#define HFCLK_FREQ_19p2_MHZ (1 << 0) +#define HFCLK_FREQ_26_MHZ (2 << 0) +#define HFCLK_FREQ_38p4_MHZ (3 << 0) +#define HIGH_PERF_SQ (1 << 3) + + +/*----------------------------------------------------------------------*/ + +/** + * struct twl4030_mod_iregs - TWL module IMR/ISR regs to mask/clear at init + * @mod_no: TWL4030 module number (e.g., TWL4030_MODULE_GPIO) + * @sih_ctrl: address of module SIH_CTRL register + * @reg_cnt: number of IMR/ISR regs + * @imrs: pointer to array of TWL module interrupt mask register indices + * @isrs: pointer to array of TWL module interrupt status register indices + * + * Ties together TWL4030 modules and lists of IMR/ISR registers to mask/clear + * during twl_init_irq(). + */ +struct twl4030_mod_iregs { + const u8 mod_no; + const u8 sih_ctrl; + const u8 reg_cnt; + const u8 *imrs; + const u8 *isrs; +}; + +/* TWL4030 INT module interrupt mask registers */ +static const u8 __initconst twl4030_int_imr_regs[] = { + TWL4030_INT_PWR_IMR1, + TWL4030_INT_PWR_IMR2, +}; + +/* TWL4030 INT module interrupt status registers */ +static const u8 __initconst twl4030_int_isr_regs[] = { + TWL4030_INT_PWR_ISR1, + TWL4030_INT_PWR_ISR2, +}; + +/* TWL4030 INTERRUPTS module interrupt mask registers */ +static const u8 __initconst twl4030_interrupts_imr_regs[] = { + TWL4030_INTERRUPTS_BCIIMR1A, + TWL4030_INTERRUPTS_BCIIMR1B, + TWL4030_INTERRUPTS_BCIIMR2A, + TWL4030_INTERRUPTS_BCIIMR2B, +}; + +/* TWL4030 INTERRUPTS module interrupt status registers */ +static const u8 __initconst twl4030_interrupts_isr_regs[] = { + TWL4030_INTERRUPTS_BCIISR1A, + TWL4030_INTERRUPTS_BCIISR1B, + TWL4030_INTERRUPTS_BCIISR2A, + TWL4030_INTERRUPTS_BCIISR2B, +}; + +/* TWL4030 MADC module interrupt mask registers */ +static const u8 __initconst twl4030_madc_imr_regs[] = { + TWL4030_MADC_IMR1, + TWL4030_MADC_IMR2, +}; + +/* TWL4030 MADC module interrupt status registers */ +static const u8 __initconst twl4030_madc_isr_regs[] = { + TWL4030_MADC_ISR1, + TWL4030_MADC_ISR2, +}; + +/* TWL4030 keypad module interrupt mask registers */ +static const u8 __initconst twl4030_keypad_imr_regs[] = { + TWL4030_KEYPAD_KEYP_IMR1, + TWL4030_KEYPAD_KEYP_IMR2, +}; + +/* TWL4030 keypad module interrupt status registers */ +static const u8 __initconst twl4030_keypad_isr_regs[] = { + TWL4030_KEYPAD_KEYP_ISR1, + TWL4030_KEYPAD_KEYP_ISR2, +}; + +/* TWL4030 GPIO module interrupt mask registers */ +static const u8 __initconst twl4030_gpio_imr_regs[] = { + REG_GPIO_IMR1A, + REG_GPIO_IMR1B, + REG_GPIO_IMR2A, + REG_GPIO_IMR2B, + REG_GPIO_IMR3A, + REG_GPIO_IMR3B, +}; + +/* TWL4030 GPIO module interrupt status registers */ +static const u8 __initconst twl4030_gpio_isr_regs[] = { + REG_GPIO_ISR1A, + REG_GPIO_ISR1B, + REG_GPIO_ISR2A, + REG_GPIO_ISR2B, + REG_GPIO_ISR3A, + REG_GPIO_ISR3B, +}; + +/* TWL4030 modules that have IMR/ISR registers that must be masked/cleared */ +static const struct twl4030_mod_iregs __initconst twl4030_mod_regs[] = { + { + .mod_no = TWL4030_MODULE_INT, + .sih_ctrl = TWL4030_INT_PWR_SIH_CTRL, + .reg_cnt = ARRAY_SIZE(twl4030_int_imr_regs), + .imrs = twl4030_int_imr_regs, + .isrs = twl4030_int_isr_regs, + }, + { + .mod_no = TWL4030_MODULE_INTERRUPTS, + .sih_ctrl = TWL4030_INTERRUPTS_BCISIHCTRL, + .reg_cnt = ARRAY_SIZE(twl4030_interrupts_imr_regs), + .imrs = twl4030_interrupts_imr_regs, + .isrs = twl4030_interrupts_isr_regs, + }, + { + .mod_no = TWL4030_MODULE_MADC, + .sih_ctrl = TWL4030_MADC_SIH_CTRL, + .reg_cnt = ARRAY_SIZE(twl4030_madc_imr_regs), + .imrs = twl4030_madc_imr_regs, + .isrs = twl4030_madc_isr_regs, + }, + { + .mod_no = TWL4030_MODULE_KEYPAD, + .sih_ctrl = TWL4030_KEYPAD_KEYP_SIH_CTRL, + .reg_cnt = ARRAY_SIZE(twl4030_keypad_imr_regs), + .imrs = twl4030_keypad_imr_regs, + .isrs = twl4030_keypad_isr_regs, + }, + { + .mod_no = TWL4030_MODULE_GPIO, + .sih_ctrl = REG_GPIO_SIH_CTRL, + .reg_cnt = ARRAY_SIZE(twl4030_gpio_imr_regs), + .imrs = twl4030_gpio_imr_regs, + .isrs = twl4030_gpio_isr_regs, + }, +}; + +/*----------------------------------------------------------------*/ + +/* is driver active, bound to a chip? */ +static bool inuse; + +/* Structure for each TWL4030 Slave */ +struct twl4030_client { + struct i2c_client *client; + u8 address; + + /* max numb of i2c_msg required is for read =2 */ + struct i2c_msg xfer_msg[2]; + + /* To lock access to xfer_msg */ + struct mutex xfer_lock; +}; + +static struct twl4030_client twl4030_modules[TWL4030_NUM_SLAVES]; + + +/* mapping the module id to slave id and base address */ +struct twl4030mapping { + unsigned char sid; /* Slave ID */ + unsigned char base; /* base address */ +}; + +static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = { + /* + * NOTE: don't change this table without updating the + * <linux/i2c/twl4030.h> defines for TWL4030_MODULE_* + * so they continue to match the order in this table. + */ + + { 0, TWL4030_BASEADD_USB }, + + { 1, TWL4030_BASEADD_AUDIO_VOICE }, + { 1, TWL4030_BASEADD_GPIO }, + { 1, TWL4030_BASEADD_INTBR }, + { 1, TWL4030_BASEADD_PIH }, + { 1, TWL4030_BASEADD_TEST }, + + { 2, TWL4030_BASEADD_KEYPAD }, + { 2, TWL4030_BASEADD_MADC }, + { 2, TWL4030_BASEADD_INTERRUPTS }, + { 2, TWL4030_BASEADD_LED }, + { 2, TWL4030_BASEADD_MAIN_CHARGE }, + { 2, TWL4030_BASEADD_PRECHARGE }, + { 2, TWL4030_BASEADD_PWM0 }, + { 2, TWL4030_BASEADD_PWM1 }, + { 2, TWL4030_BASEADD_PWMA }, + { 2, TWL4030_BASEADD_PWMB }, + + { 3, TWL4030_BASEADD_BACKUP }, + { 3, TWL4030_BASEADD_INT }, + { 3, TWL4030_BASEADD_PM_MASTER }, + { 3, TWL4030_BASEADD_PM_RECEIVER }, + { 3, TWL4030_BASEADD_RTC }, + { 3, TWL4030_BASEADD_SECURED_REG }, +}; + +/*----------------------------------------------------------------------*/ + +/* + * TWL4030 doesn't have PIH mask, hence dummy function for mask + * and unmask of the (eight) interrupts reported at that level ... + * masking is only available from SIH (secondary) modules. + */ + +static void twl4030_i2c_ackirq(unsigned int irq) +{ +} + +static void twl4030_i2c_disableint(unsigned int irq) +{ +} + +static void twl4030_i2c_enableint(unsigned int irq) +{ +} + +static struct irq_chip twl4030_irq_chip = { + .name = "twl4030", + .ack = twl4030_i2c_ackirq, + .mask = twl4030_i2c_disableint, + .unmask = twl4030_i2c_enableint, +}; + +/*----------------------------------------------------------------------*/ + +/* Exported Functions */ + +/** + * twl4030_i2c_write - Writes a n bit register in TWL4030 + * @mod_no: module number + * @value: an array of num_bytes+1 containing data to write + * @reg: register address (just offset will do) + * @num_bytes: number of bytes to transfer + * + * IMPORTANT: for 'value' parameter: Allocate value num_bytes+1 and + * valid data starts at Offset 1. + * + * Returns the result of operation - 0 is success + */ +int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, u8 num_bytes) +{ + int ret; + int sid; + struct twl4030_client *twl; + struct i2c_msg *msg; + + if (unlikely(mod_no > TWL4030_MODULE_LAST)) { + pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no); + return -EPERM; + } + sid = twl4030_map[mod_no].sid; + twl = &twl4030_modules[sid]; + + if (unlikely(!inuse)) { + pr_err("%s: client %d is not initialized\n", DRIVER_NAME, sid); + return -EPERM; + } + mutex_lock(&twl->xfer_lock); + /* + * [MSG1]: fill the register address data + * fill the data Tx buffer + */ + msg = &twl->xfer_msg[0]; + msg->addr = twl->address; + msg->len = num_bytes + 1; + msg->flags = 0; + msg->buf = value; + /* over write the first byte of buffer with the register address */ + *value = twl4030_map[mod_no].base + reg; + ret = i2c_transfer(twl->client->adapter, twl->xfer_msg, 1); + mutex_unlock(&twl->xfer_lock); + + /* i2cTransfer returns num messages.translate it pls.. */ + if (ret >= 0) + ret = 0; + return ret; +} +EXPORT_SYMBOL(twl4030_i2c_write); + +/** + * twl4030_i2c_read - Reads a n bit register in TWL4030 + * @mod_no: module number + * @value: an array of num_bytes containing data to be read + * @reg: register address (just offset will do) + * @num_bytes: number of bytes to transfer + * + * Returns result of operation - num_bytes is success else failure. + */ +int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, u8 num_bytes) +{ + int ret; + u8 val; + int sid; + struct twl4030_client *twl; + struct i2c_msg *msg; + + if (unlikely(mod_no > TWL4030_MODULE_LAST)) { + pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no); + return -EPERM; + } + sid = twl4030_map[mod_no].sid; + twl = &twl4030_modules[sid]; + + if (unlikely(!inuse)) { + pr_err("%s: client %d is not initialized\n", DRIVER_NAME, sid); + return -EPERM; + } + mutex_lock(&twl->xfer_lock); + /* [MSG1] fill the register address data */ + msg = &twl->xfer_msg[0]; + msg->addr = twl->address; + msg->len = 1; + msg->flags = 0; /* Read the register value */ + val = twl4030_map[mod_no].base + reg; + msg->buf = &val; + /* [MSG2] fill the data rx buffer */ + msg = &twl->xfer_msg[1]; + msg->addr = twl->address; + msg->flags = I2C_M_RD; /* Read the register value */ + msg->len = num_bytes; /* only n bytes */ + msg->buf = value; + ret = i2c_transfer(twl->client->adapter, twl->xfer_msg, 2); + mutex_unlock(&twl->xfer_lock); + + /* i2cTransfer returns num messages.translate it pls.. */ + if (ret >= 0) + ret = 0; + return ret; +} +EXPORT_SYMBOL(twl4030_i2c_read); + +/** + * twl4030_i2c_write_u8 - Writes a 8 bit register in TWL4030 + * @mod_no: module number + * @value: the value to be written 8 bit + * @reg: register address (just offset will do) + * + * Returns result of operation - 0 is success + */ +int twl4030_i2c_write_u8(u8 mod_no, u8 value, u8 reg) +{ + + /* 2 bytes offset 1 contains the data offset 0 is used by i2c_write */ + u8 temp_buffer[2] = { 0 }; + /* offset 1 contains the data */ + temp_buffer[1] = value; + return twl4030_i2c_write(mod_no, temp_buffer, reg, 1); +} +EXPORT_SYMBOL(twl4030_i2c_write_u8); + +/** + * twl4030_i2c_read_u8 - Reads a 8 bit register from TWL4030 + * @mod_no: module number + * @value: the value read 8 bit + * @reg: register address (just offset will do) + * + * Returns result of operation - 0 is success + */ +int twl4030_i2c_read_u8(u8 mod_no, u8 *value, u8 reg) +{ + return twl4030_i2c_read(mod_no, value, reg, 1); +} +EXPORT_SYMBOL(twl4030_i2c_read_u8); + +/*----------------------------------------------------------------------*/ + +static unsigned twl4030_irq_base; + +static struct completion irq_event; + +/* + * This thread processes interrupts reported by the Primary Interrupt Handler. + */ +static int twl4030_irq_thread(void *data) +{ + long irq = (long)data; + irq_desc_t *desc = irq_desc + irq; + static unsigned i2c_errors; + const static unsigned max_i2c_errors = 100; + + current->flags |= PF_NOFREEZE; + + while (!kthread_should_stop()) { + int ret; + int module_irq; + u8 pih_isr; + + /* Wait for IRQ, then read PIH irq status (also blocking) */ + wait_for_completion_interruptible(&irq_event); + + ret = twl4030_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr, + REG_PIH_ISR_P1); + if (ret) { + pr_warning("%s: I2C error %d reading PIH ISR\n", + DRIVER_NAME, ret); + if (++i2c_errors >= max_i2c_errors) { + printk(KERN_ERR "Maximum I2C error count" + " exceeded. Terminating %s.\n", + __func__); + break; + } + complete(&irq_event); + continue; + } + + /* these handlers deal with the relevant SIH irq status */ + local_irq_disable(); + for (module_irq = twl4030_irq_base; + pih_isr; + pih_isr >>= 1, module_irq++) { + if (pih_isr & 0x1) { + irq_desc_t *d = irq_desc + module_irq; + + d->handle_irq(module_irq, d); + } + } + local_irq_enable(); + + desc->chip->unmask(irq); + } + + return 0; +} + +/* + * do_twl4030_irq() is the desc->handle method for the twl4030 interrupt. + * This is a chained interrupt, so there is no desc->action method for it. + * Now we need to query the interrupt controller in the twl4030 to determine + * which module is generating the interrupt request. However, we can't do i2c + * transactions in interrupt context, so we must defer that work to a kernel + * thread. All we do here is acknowledge and mask the interrupt and wakeup + * the kernel thread. + */ +static void do_twl4030_irq(unsigned int irq, irq_desc_t *desc) +{ + const unsigned int cpu = smp_processor_id(); + + /* + * Earlier this was desc->triggered = 1; + */ + desc->status |= IRQ_LEVEL; + + /* + * Acknowledge, clear _AND_ disable the interrupt. + */ + desc->chip->ack(irq); + + if (!desc->depth) { + kstat_cpu(cpu).irqs[irq]++; + + complete(&irq_event); + } +} + +static struct task_struct * __init start_twl4030_irq_thread(long irq) +{ + struct task_struct *thread; + + init_completion(&irq_event); + thread = kthread_run(twl4030_irq_thread, (void *)irq, "twl4030-irq"); + if (!thread) + pr_err("%s: could not create twl4030 irq %ld thread!\n", + DRIVER_NAME, irq); + + return thread; +} + +/*----------------------------------------------------------------------*/ + +static int add_children(struct twl4030_platform_data *pdata) +{ + struct platform_device *pdev = NULL; + struct twl4030_client *twl = NULL; + int status = 0; + + if (twl_has_bci() && pdata->bci) { + twl = &twl4030_modules[3]; + + pdev = platform_device_alloc("twl4030_bci", -1); + if (!pdev) { + pr_debug("%s: can't alloc bci dev\n", DRIVER_NAME); + status = -ENOMEM; + goto err; + } + + if (status == 0) { + pdev->dev.parent = &twl->client->dev; + status = platform_device_add_data(pdev, pdata->bci, + sizeof(*pdata->bci)); + if (status < 0) { + dev_dbg(&twl->client->dev, + "can't add bci data, %d\n", + status); + goto err; + } + } + + if (status == 0) { + struct resource r = { + .start = TWL4030_PWRIRQ_CHG_PRES, + .flags = IORESOURCE_IRQ, + }; + + status = platform_device_add_resources(pdev, &r, 1); + } + + if (status == 0) + status = platform_device_add(pdev); + + if (status < 0) { + platform_device_put(pdev); + dev_dbg(&twl->client->dev, + "can't create bci dev, %d\n", + status); + goto err; + } + } + + if (twl_has_gpio() && pdata->gpio) { + twl = &twl4030_modules[1]; + + pdev = platform_device_alloc("twl4030_gpio", -1); + if (!pdev) { + pr_debug("%s: can't alloc gpio dev\n", DRIVER_NAME); + status = -ENOMEM; + goto err; + } + + /* more driver model init */ + if (status == 0) { + pdev->dev.parent = &twl->client->dev; + /* device_init_wakeup(&pdev->dev, 1); */ + + status = platform_device_add_data(pdev, pdata->gpio, + sizeof(*pdata->gpio)); + if (status < 0) { + dev_dbg(&twl->client->dev, + "can't add gpio data, %d\n", + status); + goto err; + } + } + + /* GPIO module IRQ */ + if (status == 0) { + struct resource r = { + .start = pdata->irq_base + 0, + .flags = IORESOURCE_IRQ, + }; + + status = platform_device_add_resources(pdev, &r, 1); + } + + if (status == 0) + status = platform_device_add(pdev); + + if (status < 0) { + platform_device_put(pdev); + dev_dbg(&twl->client->dev, + "can't create gpio dev, %d\n", + status); + goto err; + } + } + + if (twl_has_keypad() && pdata->keypad) { + pdev = platform_device_alloc("twl4030_keypad", -1); + if (pdev) { + twl = &twl4030_modules[2]; + pdev->dev.parent = &twl->client->dev; + device_init_wakeup(&pdev->dev, 1); + status = platform_device_add_data(pdev, pdata->keypad, + sizeof(*pdata->keypad)); + if (status < 0) { + dev_dbg(&twl->client->dev, + "can't add keypad data, %d\n", + status); + platform_device_put(pdev); + goto err; + } + status = platform_device_add(pdev); + if (status < 0) { + platform_device_put(pdev); + dev_dbg(&twl->client->dev, + "can't create keypad dev, %d\n", + status); + goto err; + } + } else { + pr_debug("%s: can't alloc keypad dev\n", DRIVER_NAME); + status = -ENOMEM; + goto err; + } + } + + if (twl_has_madc() && pdata->madc) { + pdev = platform_device_alloc("twl4030_madc", -1); + if (pdev) { + twl = &twl4030_modules[2]; + pdev->dev.parent = &twl->client->dev; + device_init_wakeup(&pdev->dev, 1); + status = platform_device_add_data(pdev, pdata->madc, + sizeof(*pdata->madc)); + if (status < 0) { + platform_device_put(pdev); + dev_dbg(&twl->client->dev, + "can't add madc data, %d\n", + status); + goto err; + } + status = platform_device_add(pdev); + if (status < 0) { + platform_device_put(pdev); + dev_dbg(&twl->client->dev, + "can't create madc dev, %d\n", + status); + goto err; + } + } else { + pr_debug("%s: can't alloc madc dev\n", DRIVER_NAME); + status = -ENOMEM; + goto err; + } + } + + if (twl_has_rtc()) { + twl = &twl4030_modules[3]; + + pdev = platform_device_alloc("twl4030_rtc", -1); + if (!pdev) { + pr_debug("%s: can't alloc rtc dev\n", DRIVER_NAME); + status = -ENOMEM; + } else { + pdev->dev.parent = &twl->client->dev; + device_init_wakeup(&pdev->dev, 1); + } + + /* + * REVISIT platform_data here currently might use of + * "msecure" line ... but for now we just expect board + * setup to tell the chip "we are secure" at all times. + * Eventually, Linux might become more aware of such + * HW security concerns, and "least privilege". + */ + + /* RTC module IRQ */ + if (status == 0) { + struct resource r = { + /* REVISIT don't hard-wire this stuff */ + .start = TWL4030_PWRIRQ_RTC, + .flags = IORESOURCE_IRQ, + }; + + status = platform_device_add_resources(pdev, &r, 1); + } + + if (status == 0) + status = platform_device_add(pdev); + + if (status < 0) { + platform_device_put(pdev); + dev_dbg(&twl->client->dev, + "can't create rtc dev, %d\n", + status); + goto err; + } + } + + if (twl_has_usb() && pdata->usb) { + twl = &twl4030_modules[0]; + + pdev = platform_device_alloc("twl4030_usb", -1); + if (!pdev) { + pr_debug("%s: can't alloc usb dev\n", DRIVER_NAME); + status = -ENOMEM; + goto err; + } + + if (status == 0) { + pdev->dev.parent = &twl->client->dev; + device_init_wakeup(&pdev->dev, 1); + status = platform_device_add_data(pdev, pdata->usb, + sizeof(*pdata->usb)); + if (status < 0) { + platform_device_put(pdev); + dev_dbg(&twl->client->dev, + "can't add usb data, %d\n", + status); + goto err; + } + } + + if (status == 0) { + struct resource r = { + .start = TWL4030_PWRIRQ_USB_PRES, + .flags = IORESOURCE_IRQ, + }; + + status = platform_device_add_resources(pdev, &r, 1); + } + + if (status == 0) + status = platform_device_add(pdev); + + if (status < 0) { + platform_device_put(pdev); + dev_dbg(&twl->client->dev, + "can't create usb dev, %d\n", + status); + } + } + +err: + if (status) + pr_err("failed to add twl4030's children (status %d)\n", status); + return status; +} + +/*----------------------------------------------------------------------*/ + +/* + * These three functions initialize the on-chip clock framework, + * letting it generate the right frequencies for USB, MADC, and + * other purposes. + */ +static inline int __init protect_pm_master(void) +{ + int e = 0; + + e = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_LOCK, + R_PROTECT_KEY); + return e; +} + +static inline int __init unprotect_pm_master(void) +{ + int e = 0; + + e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_UNLOCK1, + R_PROTECT_KEY); + e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_UNLOCK2, + R_PROTECT_KEY); + return e; +} + +static void __init clocks_init(void) +{ + int e = 0; + struct clk *osc; + u32 rate; + u8 ctrl = HFCLK_FREQ_26_MHZ; + +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + if (cpu_is_omap2430()) + osc = clk_get(NULL, "osc_ck"); + else + osc = clk_get(NULL, "osc_sys_ck"); +#else + /* REVISIT for non-OMAP systems, pass the clock rate from + * board init code, using platform_data. + */ + osc = ERR_PTR(-EIO); +#endif + if (IS_ERR(osc)) { + printk(KERN_WARNING "Skipping twl4030 internal clock init and " + "using bootloader value (unknown osc rate)\n"); + return; + } + + rate = clk_get_rate(osc); + clk_put(osc); + + switch (rate) { + case 19200000: + ctrl = HFCLK_FREQ_19p2_MHZ; + break; + case 26000000: + ctrl = HFCLK_FREQ_26_MHZ; + break; + case 38400000: + ctrl = HFCLK_FREQ_38p4_MHZ; + break; + } + + ctrl |= HIGH_PERF_SQ; + e |= unprotect_pm_master(); + /* effect->MADC+USB ck en */ + e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, ctrl, R_CFG_BOOT); + e |= protect_pm_master(); + + if (e < 0) + pr_err("%s: clock init err [%d]\n", DRIVER_NAME, e); +} + +/*----------------------------------------------------------------------*/ + +/** + * twl4030_i2c_clear_isr - clear TWL4030 SIH ISR regs via read + write + * @mod_no: TWL4030 module number + * @reg: register index to clear + * @cor: value of the <module>_SIH_CTRL.COR bit (1 or 0) + * + * Either reads (cor == 1) or writes (cor == 0) to a TWL4030 interrupt + * status register to ensure that any prior interrupts are cleared. + * Returns the status from the I2C read operation. + */ +static int __init twl4030_i2c_clear_isr(u8 mod_no, u8 reg, u8 cor) +{ + u8 tmp; + + return (cor) ? twl4030_i2c_read_u8(mod_no, &tmp, reg) : + twl4030_i2c_write_u8(mod_no, 0xff, reg); +} + +/** + * twl4030_read_cor_bit - are TWL module ISRs cleared by reads or writes? + * @mod_no: TWL4030 module number + * @reg: register index to clear + * + * Returns 1 if the TWL4030 SIH interrupt status registers (ISRs) for + * the specified TWL module are cleared by reads, or 0 if cleared by + * writes. + */ +static int twl4030_read_cor_bit(u8 mod_no, u8 reg) +{ + u8 tmp = 0; + + WARN_ON(twl4030_i2c_read_u8(mod_no, &tmp, reg) < 0); + + tmp &= TWL4030_SIH_CTRL_COR_MASK; + tmp >>= __ffs(TWL4030_SIH_CTRL_COR_MASK); + + return tmp; +} + +/** + * twl4030_mask_clear_intrs - mask and clear all TWL4030 interrupts + * @t: pointer to twl4030_mod_iregs array + * @t_sz: ARRAY_SIZE(t) (starting at 1) + * + * Mask all TWL4030 interrupt mask registers (IMRs) and clear all + * interrupt status registers (ISRs). No return value, but will WARN if + * any I2C operations fail. + */ +static void __init twl4030_mask_clear_intrs(const struct twl4030_mod_iregs *t, + const u8 t_sz) +{ + int i, j; + + /* + * N.B. - further efficiency is possible here. Eight I2C + * operations on BCI and GPIO modules are avoidable if I2C + * burst read/write transactions were implemented. Would + * probably save about 1ms of boot time and a small amount of + * power. + */ + for (i = 0; i < t_sz; i++) { + const struct twl4030_mod_iregs tmr = t[i]; + int cor; + + /* Are ISRs cleared by reads or writes? */ + cor = twl4030_read_cor_bit(tmr.mod_no, tmr.sih_ctrl); + + for (j = 0; j < tmr.reg_cnt; j++) { + + /* Mask interrupts at the TWL4030 */ + WARN_ON(twl4030_i2c_write_u8(tmr.mod_no, 0xff, + tmr.imrs[j]) < 0); + + /* Clear TWL4030 ISRs */ + WARN_ON(twl4030_i2c_clear_isr(tmr.mod_no, + tmr.isrs[j], cor) < 0); + } + } +} + + +static void twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end) +{ + int i; + + /* + * Mask and clear all TWL4030 interrupts since initially we do + * not have any TWL4030 module interrupt handlers present + */ + twl4030_mask_clear_intrs(twl4030_mod_regs, + ARRAY_SIZE(twl4030_mod_regs)); + + twl4030_irq_base = irq_base; + + /* install an irq handler for each of the PIH modules */ + for (i = irq_base; i < irq_end; i++) { + set_irq_chip_and_handler(i, &twl4030_irq_chip, + handle_simple_irq); + activate_irq(i); + } + + /* install an irq handler to demultiplex the TWL4030 interrupt */ + set_irq_data(irq_num, start_twl4030_irq_thread(irq_num)); + set_irq_chained_handler(irq_num, do_twl4030_irq); +} + +/*----------------------------------------------------------------------*/ + +static int twl4030_remove(struct i2c_client *client) +{ + unsigned i; + + /* FIXME undo twl_init_irq() */ + if (twl4030_irq_base) { + dev_err(&client->dev, "can't yet clean up IRQs?\n"); + return -ENOSYS; + } + + for (i = 0; i < TWL4030_NUM_SLAVES; i++) { + struct twl4030_client *twl = &twl4030_modules[i]; + + if (twl->client && twl->client != client) + i2c_unregister_device(twl->client); + twl4030_modules[i].client = NULL; + } + inuse = false; + return 0; +} + +/* NOTE: this driver only handles a single twl4030/tps659x0 chip */ +static int +twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + int status; + unsigned i; + struct twl4030_platform_data *pdata = client->dev.platform_data; + + if (!pdata) { + dev_dbg(&client->dev, "no platform data?\n"); + return -EINVAL; + } + + if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) { + dev_dbg(&client->dev, "can't talk I2C?\n"); + return -EIO; + } + + if (inuse || twl4030_irq_base) { + dev_dbg(&client->dev, "driver is already in use\n"); + return -EBUSY; + } + + for (i = 0; i < TWL4030_NUM_SLAVES; i++) { + struct twl4030_client *twl = &twl4030_modules[i]; + + twl->address = client->addr + i; + if (i == 0) + twl->client = client; + else { + twl->client = i2c_new_dummy(client->adapter, + twl->address); + if (!twl->client) { + dev_err(&twl->client->dev, + "can't attach client %d\n", i); + status = -ENOMEM; + goto fail; + } + strlcpy(twl->client->name, id->name, + sizeof(twl->client->name)); + } + mutex_init(&twl->xfer_lock); + } + inuse = true; + + /* setup clock framework */ + clocks_init(); + + /* Maybe init the T2 Interrupt subsystem */ + if (client->irq + && pdata->irq_base + && pdata->irq_end > pdata->irq_base) { + twl_init_irq(client->irq, pdata->irq_base, pdata->irq_end); + dev_info(&client->dev, "IRQ %d chains IRQs %d..%d\n", + client->irq, pdata->irq_base, pdata->irq_end - 1); + } + + status = add_children(pdata); +fail: + if (status < 0) + twl4030_remove(client); + return status; +} + +static const struct i2c_device_id twl4030_ids[] = { + { "twl4030", 0 }, /* "Triton 2" */ + { "tps65950", 0 }, /* catalog version of twl4030 */ + { "tps65930", 0 }, /* fewer LDOs and DACs; no charger */ + { "tps65920", 0 }, /* fewer LDOs; no codec or charger */ + { "twl5030", 0 }, /* T2 updated */ + { /* end of list */ }, +}; +MODULE_DEVICE_TABLE(i2c, twl4030_ids); + +/* One Client Driver , 4 Clients */ +static struct i2c_driver twl4030_driver = { + .driver.name = DRIVER_NAME, + .id_table = twl4030_ids, + .probe = twl4030_probe, + .remove = twl4030_remove, +}; + +static int __init twl4030_init(void) +{ + return i2c_add_driver(&twl4030_driver); +} +subsys_initcall(twl4030_init); + +static void __exit twl4030_exit(void) +{ + i2c_del_driver(&twl4030_driver); +} +module_exit(twl4030_exit); + +MODULE_AUTHOR("Texas Instruments, Inc."); +MODULE_DESCRIPTION("I2C Core interface for TWL4030"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index 25a7a5d08bce..bf87f675e7fa 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -1217,7 +1217,7 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, mutex_init(&wm8350->irq_mutex); INIT_WORK(&wm8350->irq_work, wm8350_irq_worker); - if (irq != NO_IRQ) { + if (irq) { ret = request_irq(irq, wm8350_irq, 0, "wm8350", wm8350); if (ret != 0) { diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h new file mode 100644 index 000000000000..cdb453162a97 --- /dev/null +++ b/include/linux/i2c/twl4030.h @@ -0,0 +1,339 @@ +/* + * twl4030.h - header for TWL4030 PM and audio CODEC device + * + * Copyright (C) 2005-2006 Texas Instruments, Inc. + * + * Based on tlv320aic23.c: + * Copyright (c) by Kai Svahn <kai.svahn@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __TWL4030_H_ +#define __TWL4030_H_ + +/* + * Using the twl4030 core we address registers using a pair + * { module id, relative register offset } + * which that core then maps to the relevant + * { i2c slave, absolute register address } + * + * The module IDs are meaningful only to the twl4030 core code, + * which uses them as array indices to look up the first register + * address each module uses within a given i2c slave. + */ + +/* Slave 0 (i2c address 0x48) */ +#define TWL4030_MODULE_USB 0x00 + +/* Slave 1 (i2c address 0x49) */ +#define TWL4030_MODULE_AUDIO_VOICE 0x01 +#define TWL4030_MODULE_GPIO 0x02 +#define TWL4030_MODULE_INTBR 0x03 +#define TWL4030_MODULE_PIH 0x04 +#define TWL4030_MODULE_TEST 0x05 + +/* Slave 2 (i2c address 0x4a) */ +#define TWL4030_MODULE_KEYPAD 0x06 +#define TWL4030_MODULE_MADC 0x07 +#define TWL4030_MODULE_INTERRUPTS 0x08 +#define TWL4030_MODULE_LED 0x09 +#define TWL4030_MODULE_MAIN_CHARGE 0x0A +#define TWL4030_MODULE_PRECHARGE 0x0B +#define TWL4030_MODULE_PWM0 0x0C +#define TWL4030_MODULE_PWM1 0x0D +#define TWL4030_MODULE_PWMA 0x0E +#define TWL4030_MODULE_PWMB 0x0F + +/* Slave 3 (i2c address 0x4b) */ +#define TWL4030_MODULE_BACKUP 0x10 +#define TWL4030_MODULE_INT 0x11 +#define TWL4030_MODULE_PM_MASTER 0x12 +#define TWL4030_MODULE_PM_RECEIVER 0x13 +#define TWL4030_MODULE_RTC 0x14 +#define TWL4030_MODULE_SECURED_REG 0x15 + +/* + * Read and write single 8-bit registers + */ +int twl4030_i2c_write_u8(u8 mod_no, u8 val, u8 reg); +int twl4030_i2c_read_u8(u8 mod_no, u8 *val, u8 reg); + +/* + * Read and write several 8-bit registers at once. + * + * IMPORTANT: For twl4030_i2c_write(), allocate num_bytes + 1 + * for the value, and populate your data starting at offset 1. + */ +int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, u8 num_bytes); +int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, u8 num_bytes); + +/*----------------------------------------------------------------------*/ + +/* + * NOTE: at up to 1024 registers, this is a big chip. + * + * Avoid putting register declarations in this file, instead of into + * a driver-private file, unless some of the registers in a block + * need to be shared with other drivers. One example is blocks that + * have Secondary IRQ Handler (SIH) registers. + */ + +#define TWL4030_SIH_CTRL_EXCLEN_MASK BIT(0) +#define TWL4030_SIH_CTRL_PENDDIS_MASK BIT(1) +#define TWL4030_SIH_CTRL_COR_MASK BIT(2) + +/*----------------------------------------------------------------------*/ + +/* + * GPIO Block Register offsets (use TWL4030_MODULE_GPIO) + */ + +#define REG_GPIODATAIN1 0x0 +#define REG_GPIODATAIN2 0x1 +#define REG_GPIODATAIN3 0x2 +#define REG_GPIODATADIR1 0x3 +#define REG_GPIODATADIR2 0x4 +#define REG_GPIODATADIR3 0x5 +#define REG_GPIODATAOUT1 0x6 +#define REG_GPIODATAOUT2 0x7 +#define REG_GPIODATAOUT3 0x8 +#define REG_CLEARGPIODATAOUT1 0x9 +#define REG_CLEARGPIODATAOUT2 0xA +#define REG_CLEARGPIODATAOUT3 0xB +#define REG_SETGPIODATAOUT1 0xC +#define REG_SETGPIODATAOUT2 0xD +#define REG_SETGPIODATAOUT3 0xE +#define REG_GPIO_DEBEN1 0xF +#define REG_GPIO_DEBEN2 0x10 +#define REG_GPIO_DEBEN3 0x11 +#define REG_GPIO_CTRL 0x12 +#define REG_GPIOPUPDCTR1 0x13 +#define REG_GPIOPUPDCTR2 0x14 +#define REG_GPIOPUPDCTR3 0x15 +#define REG_GPIOPUPDCTR4 0x16 +#define REG_GPIOPUPDCTR5 0x17 +#define REG_GPIO_ISR1A 0x19 +#define REG_GPIO_ISR2A 0x1A +#define REG_GPIO_ISR3A 0x1B +#define REG_GPIO_IMR1A 0x1C +#define REG_GPIO_IMR2A 0x1D +#define REG_GPIO_IMR3A 0x1E +#define REG_GPIO_ISR1B 0x1F +#define REG_GPIO_ISR2B 0x20 +#define REG_GPIO_ISR3B 0x21 +#define REG_GPIO_IMR1B 0x22 +#define REG_GPIO_IMR2B 0x23 +#define REG_GPIO_IMR3B 0x24 +#define REG_GPIO_EDR1 0x28 +#define REG_GPIO_EDR2 0x29 +#define REG_GPIO_EDR3 0x2A +#define REG_GPIO_EDR4 0x2B +#define REG_GPIO_EDR5 0x2C +#define REG_GPIO_SIH_CTRL 0x2D + +/* Up to 18 signals are available as GPIOs, when their + * pins are not assigned to another use (such as ULPI/USB). + */ +#define TWL4030_GPIO_MAX 18 + +/*----------------------------------------------------------------------*/ + +/* + * Keypad register offsets (use TWL4030_MODULE_KEYPAD) + * ... SIH/interrupt only + */ + +#define TWL4030_KEYPAD_KEYP_ISR1 0x11 +#define TWL4030_KEYPAD_KEYP_IMR1 0x12 +#define TWL4030_KEYPAD_KEYP_ISR2 0x13 +#define TWL4030_KEYPAD_KEYP_IMR2 0x14 +#define TWL4030_KEYPAD_KEYP_SIR 0x15 /* test register */ +#define TWL4030_KEYPAD_KEYP_EDR 0x16 +#define TWL4030_KEYPAD_KEYP_SIH_CTRL 0x17 + +/*----------------------------------------------------------------------*/ + +/* + * Multichannel ADC register offsets (use TWL4030_MODULE_MADC) + * ... SIH/interrupt only + */ + +#define TWL4030_MADC_ISR1 0x61 +#define TWL4030_MADC_IMR1 0x62 +#define TWL4030_MADC_ISR2 0x63 +#define TWL4030_MADC_IMR2 0x64 +#define TWL4030_MADC_SIR 0x65 /* test register */ +#define TWL4030_MADC_EDR 0x66 +#define TWL4030_MADC_SIH_CTRL 0x67 + +/*----------------------------------------------------------------------*/ + +/* + * Battery charger register offsets (use TWL4030_MODULE_INTERRUPTS) + */ + +#define TWL4030_INTERRUPTS_BCIISR1A 0x0 +#define TWL4030_INTERRUPTS_BCIISR2A 0x1 +#define TWL4030_INTERRUPTS_BCIIMR1A 0x2 +#define TWL4030_INTERRUPTS_BCIIMR2A 0x3 +#define TWL4030_INTERRUPTS_BCIISR1B 0x4 +#define TWL4030_INTERRUPTS_BCIISR2B 0x5 +#define TWL4030_INTERRUPTS_BCIIMR1B 0x6 +#define TWL4030_INTERRUPTS_BCIIMR2B 0x7 +#define TWL4030_INTERRUPTS_BCISIR1 0x8 /* test register */ +#define TWL4030_INTERRUPTS_BCISIR2 0x9 /* test register */ +#define TWL4030_INTERRUPTS_BCIEDR1 0xa +#define TWL4030_INTERRUPTS_BCIEDR2 0xb +#define TWL4030_INTERRUPTS_BCIEDR3 0xc +#define TWL4030_INTERRUPTS_BCISIHCTRL 0xd + +/*----------------------------------------------------------------------*/ + +/* + * Power Interrupt block register offsets (use TWL4030_MODULE_INT) + */ + +#define TWL4030_INT_PWR_ISR1 0x0 +#define TWL4030_INT_PWR_IMR1 0x1 +#define TWL4030_INT_PWR_ISR2 0x2 +#define TWL4030_INT_PWR_IMR2 0x3 +#define TWL4030_INT_PWR_SIR 0x4 /* test register */ +#define TWL4030_INT_PWR_EDR1 0x5 +#define TWL4030_INT_PWR_EDR2 0x6 +#define TWL4030_INT_PWR_SIH_CTRL 0x7 + +/*----------------------------------------------------------------------*/ + +struct twl4030_bci_platform_data { + int *battery_tmp_tbl; + unsigned int tblsize; +}; + +/* TWL4030_GPIO_MAX (18) GPIOs, with interrupts */ +struct twl4030_gpio_platform_data { + int gpio_base; + unsigned irq_base, irq_end; + + /* For gpio-N, bit (1 << N) in "pullups" is set if that pullup + * should be enabled. Else, if that bit is set in "pulldowns", + * that pulldown is enabled. Don't waste power by letting any + * digital inputs float... + */ + u32 pullups; + u32 pulldowns; + + int (*setup)(struct device *dev, + unsigned gpio, unsigned ngpio); + int (*teardown)(struct device *dev, + unsigned gpio, unsigned ngpio); +}; + +struct twl4030_madc_platform_data { + int irq_line; +}; + +struct twl4030_keypad_data { + int rows; + int cols; + int *keymap; + int irq; + unsigned int keymapsize; + unsigned int rep:1; +}; + +enum twl4030_usb_mode { + T2_USB_MODE_ULPI = 1, + T2_USB_MODE_CEA2011_3PIN = 2, +}; + +struct twl4030_usb_data { + enum twl4030_usb_mode usb_mode; +}; + +struct twl4030_platform_data { + unsigned irq_base, irq_end; + struct twl4030_bci_platform_data *bci; + struct twl4030_gpio_platform_data *gpio; + struct twl4030_madc_platform_data *madc; + struct twl4030_keypad_data *keypad; + struct twl4030_usb_data *usb; + + /* REVISIT more to come ... _nothing_ should be hard-wired */ +}; + +/*----------------------------------------------------------------------*/ + +/* + * FIXME completely stop using TWL4030_IRQ_BASE ... instead, pass the + * IRQ data to subsidiary devices using platform device resources. + */ + +/* IRQ information-need base */ +#include <mach/irqs.h> +/* TWL4030 interrupts */ + +/* #define TWL4030_MODIRQ_GPIO (TWL4030_IRQ_BASE + 0) */ +#define TWL4030_MODIRQ_KEYPAD (TWL4030_IRQ_BASE + 1) +#define TWL4030_MODIRQ_BCI (TWL4030_IRQ_BASE + 2) +#define TWL4030_MODIRQ_MADC (TWL4030_IRQ_BASE + 3) +/* #define TWL4030_MODIRQ_USB (TWL4030_IRQ_BASE + 4) */ +#define TWL4030_MODIRQ_PWR (TWL4030_IRQ_BASE + 5) + +#define TWL4030_PWRIRQ_PWRBTN (TWL4030_PWR_IRQ_BASE + 0) +#define TWL4030_PWRIRQ_CHG_PRES (TWL4030_PWR_IRQ_BASE + 1) +#define TWL4030_PWRIRQ_USB_PRES (TWL4030_PWR_IRQ_BASE + 2) +#define TWL4030_PWRIRQ_RTC (TWL4030_PWR_IRQ_BASE + 3) +#define TWL4030_PWRIRQ_HOT_DIE (TWL4030_PWR_IRQ_BASE + 4) +#define TWL4030_PWRIRQ_PWROK_TIMEOUT (TWL4030_PWR_IRQ_BASE + 5) +#define TWL4030_PWRIRQ_MBCHG (TWL4030_PWR_IRQ_BASE + 6) +#define TWL4030_PWRIRQ_SC_DETECT (TWL4030_PWR_IRQ_BASE + 7) + +/* Rest are unsued currently*/ + +/* Offsets to Power Registers */ +#define TWL4030_VDAC_DEV_GRP 0x3B +#define TWL4030_VDAC_DEDICATED 0x3E +#define TWL4030_VAUX1_DEV_GRP 0x17 +#define TWL4030_VAUX1_DEDICATED 0x1A +#define TWL4030_VAUX2_DEV_GRP 0x1B +#define TWL4030_VAUX2_DEDICATED 0x1E +#define TWL4030_VAUX3_DEV_GRP 0x1F +#define TWL4030_VAUX3_DEDICATED 0x22 + +/* TWL4030 GPIO interrupt definitions */ + +#define TWL4030_GPIO_IRQ_NO(n) (TWL4030_GPIO_IRQ_BASE + (n)) +#define TWL4030_GPIO_IS_ENABLE 1 + +/* + * Exported TWL4030 GPIO APIs + * + * WARNING -- use standard GPIO and IRQ calls instead; these will vanish. + */ +int twl4030_get_gpio_datain(int gpio); +int twl4030_request_gpio(int gpio); +int twl4030_set_gpio_debounce(int gpio, int enable); +int twl4030_free_gpio(int gpio); + +#if defined(CONFIG_TWL4030_BCI_BATTERY) || \ + defined(CONFIG_TWL4030_BCI_BATTERY_MODULE) + extern int twl4030charger_usb_en(int enable); +#else + static inline int twl4030charger_usb_en(int enable) { return 0; } +#endif + +#endif /* End of __TWL4030_H */ diff --git a/include/linux/mfd/da903x.h b/include/linux/mfd/da903x.h new file mode 100644 index 000000000000..cad314c12439 --- /dev/null +++ b/include/linux/mfd/da903x.h @@ -0,0 +1,201 @@ +#ifndef __LINUX_PMIC_DA903X_H +#define __LINUX_PMIC_DA903X_H + +/* Unified sub device IDs for DA9030/DA9034 */ +enum { + DA9030_ID_LED_1, + DA9030_ID_LED_2, + DA9030_ID_LED_3, + DA9030_ID_LED_4, + DA9030_ID_LED_PC, + DA9030_ID_VIBRA, + DA9030_ID_WLED, + DA9030_ID_BUCK1, + DA9030_ID_BUCK2, + DA9030_ID_LDO1, + DA9030_ID_LDO2, + DA9030_ID_LDO3, + DA9030_ID_LDO4, + DA9030_ID_LDO5, + DA9030_ID_LDO6, + DA9030_ID_LDO7, + DA9030_ID_LDO8, + DA9030_ID_LDO9, + DA9030_ID_LDO10, + DA9030_ID_LDO11, + DA9030_ID_LDO12, + DA9030_ID_LDO13, + DA9030_ID_LDO14, + DA9030_ID_LDO15, + DA9030_ID_LDO16, + DA9030_ID_LDO17, + DA9030_ID_LDO18, + DA9030_ID_LDO19, + DA9030_ID_LDO_INT, /* LDO Internal */ + + DA9034_ID_LED_1, + DA9034_ID_LED_2, + DA9034_ID_VIBRA, + DA9034_ID_WLED, + DA9034_ID_TOUCH, + + DA9034_ID_BUCK1, + DA9034_ID_BUCK2, + DA9034_ID_LDO1, + DA9034_ID_LDO2, + DA9034_ID_LDO3, + DA9034_ID_LDO4, + DA9034_ID_LDO5, + DA9034_ID_LDO6, + DA9034_ID_LDO7, + DA9034_ID_LDO8, + DA9034_ID_LDO9, + DA9034_ID_LDO10, + DA9034_ID_LDO11, + DA9034_ID_LDO12, + DA9034_ID_LDO13, + DA9034_ID_LDO14, + DA9034_ID_LDO15, +}; + +/* + * DA9030/DA9034 LEDs sub-devices uses generic "struct led_info" + * as the platform_data + */ + +/* DA9030 flags for "struct led_info" + */ +#define DA9030_LED_RATE_ON (0 << 5) +#define DA9030_LED_RATE_052S (1 << 5) +#define DA9030_LED_DUTY_1_16 (0 << 3) +#define DA9030_LED_DUTY_1_8 (1 << 3) +#define DA9030_LED_DUTY_1_4 (2 << 3) +#define DA9030_LED_DUTY_1_2 (3 << 3) + +#define DA9030_VIBRA_MODE_1P3V (0 << 1) +#define DA9030_VIBRA_MODE_2P7V (1 << 1) +#define DA9030_VIBRA_FREQ_1HZ (0 << 2) +#define DA9030_VIBRA_FREQ_2HZ (1 << 2) +#define DA9030_VIBRA_FREQ_4HZ (2 << 2) +#define DA9030_VIBRA_FREQ_8HZ (3 << 2) +#define DA9030_VIBRA_DUTY_ON (0 << 4) +#define DA9030_VIBRA_DUTY_75P (1 << 4) +#define DA9030_VIBRA_DUTY_50P (2 << 4) +#define DA9030_VIBRA_DUTY_25P (3 << 4) + +/* DA9034 flags for "struct led_info" */ +#define DA9034_LED_RAMP (1 << 7) + +/* DA9034 touch screen platform data */ +struct da9034_touch_pdata { + int interval_ms; /* sampling interval while pen down */ + int x_inverted; + int y_inverted; +}; + +struct da903x_subdev_info { + int id; + const char *name; + void *platform_data; +}; + +struct da903x_platform_data { + int num_subdevs; + struct da903x_subdev_info *subdevs; +}; + +/* bit definitions for DA9030 events */ +#define DA9030_EVENT_ONKEY (1 << 0) +#define DA9030_EVENT_PWREN (1 << 1) +#define DA9030_EVENT_EXTON (1 << 2) +#define DA9030_EVENT_CHDET (1 << 3) +#define DA9030_EVENT_TBAT (1 << 4) +#define DA9030_EVENT_VBATMON (1 << 5) +#define DA9030_EVENT_VBATMON_TXON (1 << 6) +#define DA9030_EVENT_CHIOVER (1 << 7) +#define DA9030_EVENT_TCTO (1 << 8) +#define DA9030_EVENT_CCTO (1 << 9) +#define DA9030_EVENT_ADC_READY (1 << 10) +#define DA9030_EVENT_VBUS_4P4 (1 << 11) +#define DA9030_EVENT_VBUS_4P0 (1 << 12) +#define DA9030_EVENT_SESS_VALID (1 << 13) +#define DA9030_EVENT_SRP_DETECT (1 << 14) +#define DA9030_EVENT_WATCHDOG (1 << 15) +#define DA9030_EVENT_LDO15 (1 << 16) +#define DA9030_EVENT_LDO16 (1 << 17) +#define DA9030_EVENT_LDO17 (1 << 18) +#define DA9030_EVENT_LDO18 (1 << 19) +#define DA9030_EVENT_LDO19 (1 << 20) +#define DA9030_EVENT_BUCK2 (1 << 21) + +/* bit definitions for DA9034 events */ +#define DA9034_EVENT_ONKEY (1 << 0) +#define DA9034_EVENT_EXTON (1 << 2) +#define DA9034_EVENT_CHDET (1 << 3) +#define DA9034_EVENT_TBAT (1 << 4) +#define DA9034_EVENT_VBATMON (1 << 5) +#define DA9034_EVENT_REV_IOVER (1 << 6) +#define DA9034_EVENT_CH_IOVER (1 << 7) +#define DA9034_EVENT_CH_TCTO (1 << 8) +#define DA9034_EVENT_CH_CCTO (1 << 9) +#define DA9034_EVENT_USB_DEV (1 << 10) +#define DA9034_EVENT_OTGCP_IOVER (1 << 11) +#define DA9034_EVENT_VBUS_4P55 (1 << 12) +#define DA9034_EVENT_VBUS_3P8 (1 << 13) +#define DA9034_EVENT_SESS_1P8 (1 << 14) +#define DA9034_EVENT_SRP_READY (1 << 15) +#define DA9034_EVENT_ADC_MAN (1 << 16) +#define DA9034_EVENT_ADC_AUTO4 (1 << 17) +#define DA9034_EVENT_ADC_AUTO5 (1 << 18) +#define DA9034_EVENT_ADC_AUTO6 (1 << 19) +#define DA9034_EVENT_PEN_DOWN (1 << 20) +#define DA9034_EVENT_TSI_READY (1 << 21) +#define DA9034_EVENT_UART_TX (1 << 22) +#define DA9034_EVENT_UART_RX (1 << 23) +#define DA9034_EVENT_HEADSET (1 << 25) +#define DA9034_EVENT_HOOKSWITCH (1 << 26) +#define DA9034_EVENT_WATCHDOG (1 << 27) + +extern int da903x_register_notifier(struct device *dev, + struct notifier_block *nb, unsigned int events); +extern int da903x_unregister_notifier(struct device *dev, + struct notifier_block *nb, unsigned int events); + +/* Status Query Interface */ +#define DA9030_STATUS_ONKEY (1 << 0) +#define DA9030_STATUS_PWREN1 (1 << 1) +#define DA9030_STATUS_EXTON (1 << 2) +#define DA9030_STATUS_CHDET (1 << 3) +#define DA9030_STATUS_TBAT (1 << 4) +#define DA9030_STATUS_VBATMON (1 << 5) +#define DA9030_STATUS_VBATMON_TXON (1 << 6) +#define DA9030_STATUS_MCLKDET (1 << 7) + +#define DA9034_STATUS_ONKEY (1 << 0) +#define DA9034_STATUS_EXTON (1 << 2) +#define DA9034_STATUS_CHDET (1 << 3) +#define DA9034_STATUS_TBAT (1 << 4) +#define DA9034_STATUS_VBATMON (1 << 5) +#define DA9034_STATUS_PEN_DOWN (1 << 6) +#define DA9034_STATUS_MCLKDET (1 << 7) +#define DA9034_STATUS_USB_DEV (1 << 8) +#define DA9034_STATUS_HEADSET (1 << 9) +#define DA9034_STATUS_HOOKSWITCH (1 << 10) +#define DA9034_STATUS_REMCON (1 << 11) +#define DA9034_STATUS_VBUS_VALID_4P55 (1 << 12) +#define DA9034_STATUS_VBUS_VALID_3P8 (1 << 13) +#define DA9034_STATUS_SESS_VALID_1P8 (1 << 14) +#define DA9034_STATUS_SRP_READY (1 << 15) + +extern int da903x_query_status(struct device *dev, unsigned int status); + + +/* NOTE: the two functions below are not intended for use outside + * of the DA9034 sub-device drivers + */ +extern int da903x_write(struct device *dev, int reg, uint8_t val); +extern int da903x_read(struct device *dev, int reg, uint8_t *val); +extern int da903x_update(struct device *dev, int reg, uint8_t val, uint8_t mask); +extern int da903x_set_bits(struct device *dev, int reg, uint8_t bit_mask); +extern int da903x_clr_bits(struct device *dev, int reg, uint8_t bit_mask); +#endif /* __LINUX_PMIC_DA903X_H */ diff --git a/include/linux/mfd/t7l66xb.h b/include/linux/mfd/t7l66xb.h index e83c7f2036f9..b4629818aea5 100644 --- a/include/linux/mfd/t7l66xb.h +++ b/include/linux/mfd/t7l66xb.h @@ -15,8 +15,6 @@ #include <linux/mfd/tmio.h> struct t7l66xb_platform_data { - int (*enable_clk32k)(struct platform_device *dev); - void (*disable_clk32k)(struct platform_device *dev); int (*enable)(struct platform_device *dev); int (*disable)(struct platform_device *dev); int (*suspend)(struct platform_device *dev); diff --git a/include/linux/mfd/tc6387xb.h b/include/linux/mfd/tc6387xb.h index fa06e0610b8e..b4888209494a 100644 --- a/include/linux/mfd/tc6387xb.h +++ b/include/linux/mfd/tc6387xb.h @@ -11,9 +11,6 @@ #define MFD_TC6387XB_H struct tc6387xb_platform_data { - int (*enable_clk32k)(struct platform_device *dev); - void (*disable_clk32k)(struct platform_device *dev); - int (*enable)(struct platform_device *dev); int (*disable)(struct platform_device *dev); int (*suspend)(struct platform_device *dev); diff --git a/include/linux/mfd/tc6393xb.h b/include/linux/mfd/tc6393xb.h index fec7b3f7a81f..626e448205c5 100644 --- a/include/linux/mfd/tc6393xb.h +++ b/include/linux/mfd/tc6393xb.h @@ -17,12 +17,12 @@ #ifndef MFD_TC6393XB_H #define MFD_TC6393XB_H +#include <linux/fb.h> + /* Also one should provide the CK3P6MI clock */ struct tc6393xb_platform_data { u16 scr_pll2cr; /* PLL2 Control */ u16 scr_gper; /* GP Enable */ - u32 scr_gpo_doecr; /* GPO Data OE Control */ - u32 scr_gpo_dsr; /* GPO Data Set */ int (*enable)(struct platform_device *dev); int (*disable)(struct platform_device *dev); @@ -31,15 +31,28 @@ struct tc6393xb_platform_data { int irq_base; /* base for subdevice irqs */ int gpio_base; + int (*setup)(struct platform_device *dev); + void (*teardown)(struct platform_device *dev); struct tmio_nand_data *nand_data; + struct tmio_fb_data *fb_data; + + unsigned resume_restore : 1; /* make special actions + to preserve the state + on suspend/resume */ }; +extern int tc6393xb_lcd_mode(struct platform_device *fb, + const struct fb_videomode *mode); +extern int tc6393xb_lcd_set_power(struct platform_device *fb, bool on); + /* * Relative to irq_base */ #define IRQ_TC6393_NAND 0 #define IRQ_TC6393_MMC 1 +#define IRQ_TC6393_OHCI 2 +#define IRQ_TC6393_FB 4 #define TC6393XB_NR_IRQS 8 |