diff options
28 files changed, 1361 insertions, 678 deletions
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt index 51336e5fc761..35c3c3460d17 100644 --- a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt +++ b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt @@ -14,3 +14,22 @@ following property before the previous one: Example: compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3710"; + + +Power management +---------------- + +For power management (particularly DVFS and AVS), the North Bridge +Power Management component is needed: + +Required properties: +- compatible : should contain "marvell,armada-3700-nb-pm", "syscon"; +- reg : the register start and length for the North Bridge + Power Management + +Example: + +nb_pm: syscon@14000 { + compatible = "marvell,armada-3700-nb-pm", "syscon"; + reg = <0x14000 0x60>; +} diff --git a/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt b/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt new file mode 100644 index 000000000000..832346e489a3 --- /dev/null +++ b/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt @@ -0,0 +1,63 @@ +Texas Instruments OMAP compatible OPP supply description + +OMAP5, DRA7, and AM57 family of SoCs have Class0 AVS eFuse registers which +contain data that can be used to adjust voltages programmed for some of their +supplies for more efficient operation. This binding provides the information +needed to read these values and use them to program the main regulator during +an OPP transitions. + +Also, some supplies may have an associated vbb-supply which is an Adaptive Body +Bias regulator which much be transitioned in a specific sequence with regards +to the vdd-supply and clk when making an OPP transition. By supplying two +regulators to the device that will undergo OPP transitions we can make use +of the multi regulator binding that is part of the OPP core described here [1] +to describe both regulators needed by the platform. + +[1] Documentation/devicetree/bindings/opp/opp.txt + +Required Properties for Device Node: +- vdd-supply: phandle to regulator controlling VDD supply +- vbb-supply: phandle to regulator controlling Body Bias supply + (Usually Adaptive Body Bias regulator) + +Required Properties for opp-supply node: +- compatible: Should be one of: + "ti,omap-opp-supply" - basic OPP supply controlling VDD and VBB + "ti,omap5-opp-supply" - OMAP5+ optimized voltages in efuse(class0)VDD + along with VBB + "ti,omap5-core-opp-supply" - OMAP5+ optimized voltages in efuse(class0) VDD + but no VBB. +- reg: Address and length of the efuse register set for the device (mandatory + only for "ti,omap5-opp-supply") +- ti,efuse-settings: An array of u32 tuple items providing information about + optimized efuse configuration. Each item consists of the following: + volt: voltage in uV - reference voltage (OPP voltage) + efuse_offseet: efuse offset from reg where the optimized voltage is stored. +- ti,absolute-max-voltage-uv: absolute maximum voltage for the OPP supply. + +Example: + +/* Device Node (CPU) */ +cpus { + cpu0: cpu@0 { + device_type = "cpu"; + + ... + + vdd-supply = <&vcc>; + vbb-supply = <&abb_mpu>; + }; +}; + +/* OMAP OPP Supply with Class0 registers */ +opp_supply_mpu: opp_supply@4a003b20 { + compatible = "ti,omap5-opp-supply"; + reg = <0x4a003b20 0x8>; + ti,efuse-settings = < + /* uV offset */ + 1060000 0x0 + 1160000 0x4 + 1210000 0x8 + >; + ti,absolute-max-voltage-uv = <1500000>; +}; diff --git a/Documentation/thermal/cpu-cooling-api.txt b/Documentation/thermal/cpu-cooling-api.txt index 71653584cd03..7df567eaea1a 100644 --- a/Documentation/thermal/cpu-cooling-api.txt +++ b/Documentation/thermal/cpu-cooling-api.txt @@ -26,39 +26,16 @@ the user. The registration APIs returns the cooling device pointer. clip_cpus: cpumask of cpus where the frequency constraints will happen. 1.1.2 struct thermal_cooling_device *of_cpufreq_cooling_register( - struct device_node *np, const struct cpumask *clip_cpus) + struct cpufreq_policy *policy) This interface function registers the cpufreq cooling device with the name "thermal-cpufreq-%x" linking it with a device tree node, in order to bind it via the thermal DT code. This api can support multiple instances of cpufreq cooling devices. - np: pointer to the cooling device device tree node - clip_cpus: cpumask of cpus where the frequency constraints will happen. + policy: CPUFreq policy. -1.1.3 struct thermal_cooling_device *cpufreq_power_cooling_register( - const struct cpumask *clip_cpus, u32 capacitance, - get_static_t plat_static_func) - -Similar to cpufreq_cooling_register, this function registers a cpufreq -cooling device. Using this function, the cooling device will -implement the power extensions by using a simple cpu power model. The -cpus must have registered their OPPs using the OPP library. - -The additional parameters are needed for the power model (See 2. Power -models). "capacitance" is the dynamic power coefficient (See 2.1 -Dynamic power). "plat_static_func" is a function to calculate the -static power consumed by these cpus (See 2.2 Static power). - -1.1.4 struct thermal_cooling_device *of_cpufreq_power_cooling_register( - struct device_node *np, const struct cpumask *clip_cpus, u32 capacitance, - get_static_t plat_static_func) - -Similar to cpufreq_power_cooling_register, this function register a -cpufreq cooling device with power extensions using the device tree -information supplied by the np parameter. - -1.1.5 void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) +1.1.3 void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) This interface function unregisters the "thermal-cpufreq-%x" cooling device. @@ -67,20 +44,14 @@ information supplied by the np parameter. 2. Power models The power API registration functions provide a simple power model for -CPUs. The current power is calculated as dynamic + (optionally) -static power. This power model requires that the operating-points of +CPUs. The current power is calculated as dynamic power (static power isn't +supported currently). This power model requires that the operating-points of the CPUs are registered using the kernel's opp library and the `cpufreq_frequency_table` is assigned to the `struct device` of the cpu. If you are using CONFIG_CPUFREQ_DT then the `cpufreq_frequency_table` should already be assigned to the cpu device. -The `plat_static_func` parameter of `cpufreq_power_cooling_register()` -and `of_cpufreq_power_cooling_register()` is optional. If you don't -provide it, only dynamic power will be considered. - -2.1 Dynamic power - The dynamic power consumption of a processor depends on many factors. For a given processor implementation the primary factors are: @@ -119,79 +90,3 @@ mW/MHz/uVolt^2. Typical values for mobile CPUs might lie in range from 100 to 500. For reference, the approximate values for the SoC in ARM's Juno Development Platform are 530 for the Cortex-A57 cluster and 140 for the Cortex-A53 cluster. - - -2.2 Static power - -Static leakage power consumption depends on a number of factors. For a -given circuit implementation the primary factors are: - -- Time the circuit spends in each 'power state' -- Temperature -- Operating voltage -- Process grade - -The time the circuit spends in each 'power state' for a given -evaluation period at first order means OFF or ON. However, -'retention' states can also be supported that reduce power during -inactive periods without loss of context. - -Note: The visibility of state entries to the OS can vary, according to -platform specifics, and this can then impact the accuracy of a model -based on OS state information alone. It might be possible in some -cases to extract more accurate information from system resources. - -The temperature, operating voltage and process 'grade' (slow to fast) -of the circuit are all significant factors in static leakage power -consumption. All of these have complex relationships to static power. - -Circuit implementation specific factors include the chosen silicon -process as well as the type, number and size of transistors in both -the logic gates and any RAM elements included. - -The static power consumption modelling must take into account the -power managed regions that are implemented. Taking the example of an -ARM processor cluster, the modelling would take into account whether -each CPU can be powered OFF separately or if only a single power -region is implemented for the complete cluster. - -In one view, there are others, a static power consumption model can -then start from a set of reference values for each power managed -region (e.g. CPU, Cluster/L2) in each state (e.g. ON, OFF) at an -arbitrary process grade, voltage and temperature point. These values -are then scaled for all of the following: the time in each state, the -process grade, the current temperature and the operating voltage. -However, since both implementation specific and complex relationships -dominate the estimate, the appropriate interface to the model from the -cpu cooling device is to provide a function callback that calculates -the static power in this platform. When registering the cpu cooling -device pass a function pointer that follows the `get_static_t` -prototype: - - int plat_get_static(cpumask_t *cpumask, int interval, - unsigned long voltage, u32 &power); - -`cpumask` is the cpumask of the cpus involved in the calculation. -`voltage` is the voltage at which they are operating. The function -should calculate the average static power for the last `interval` -milliseconds. It returns 0 on success, -E* on error. If it -succeeds, it should store the static power in `power`. Reading the -temperature of the cpus described by `cpumask` is left for -plat_get_static() to do as the platform knows best which thermal -sensor is closest to the cpu. - -If `plat_static_func` is NULL, static power is considered to be -negligible for this platform and only dynamic power is considered. - -The platform specific callback can then use any combination of tables -and/or equations to permute the estimated value. Process grade -information is not passed to the model since access to such data, from -on-chip measurement capability or manufacture time data, is platform -specific. - -Note: the significance of static power for CPUs in comparison to -dynamic power is highly dependent on implementation. Given the -potential complexity in implementation, the importance and accuracy of -its inclusion when using cpu cooling devices should be assessed on a -case by case basis. - diff --git a/MAINTAINERS b/MAINTAINERS index 18994806e441..c7756748ecb3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1583,6 +1583,7 @@ F: arch/arm/boot/dts/kirkwood* F: arch/arm/configs/mvebu_*_defconfig F: arch/arm/mach-mvebu/ F: arch/arm64/boot/dts/marvell/armada* +F: drivers/cpufreq/armada-37xx-cpufreq.c F: drivers/cpufreq/mvebu-cpufreq.c F: drivers/irqchip/irq-armada-370-xp.c F: drivers/irqchip/irq-mvebu-* diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index d5181f85ca9c..963e1698fe1d 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -68,12 +68,14 @@ clock-latency = <61036>; /* two CLK32 periods */ operating-points = < /* kHz uV */ + 696000 1275000 528000 1175000 396000 1025000 198000 950000 >; fsl,soc-operating-points = < /* KHz uV */ + 696000 1275000 528000 1175000 396000 1175000 198000 1175000 diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index bdce4488ded1..3a88e33b0cfe 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -2,6 +2,29 @@ # ARM CPU Frequency scaling drivers # +config ACPI_CPPC_CPUFREQ + tristate "CPUFreq driver based on the ACPI CPPC spec" + depends on ACPI_PROCESSOR + select ACPI_CPPC_LIB + help + This adds a CPUFreq driver which uses CPPC methods + as described in the ACPIv5.1 spec. CPPC stands for + Collaborative Processor Performance Controls. It + is based on an abstract continuous scale of CPU + performance values which allows the remote power + processor to flexibly optimize for power and + performance. CPPC relies on power management firmware + support for its operation. + + If in doubt, say N. + +config ARM_ARMADA_37XX_CPUFREQ + tristate "Armada 37xx CPUFreq support" + depends on ARCH_MVEBU + help + This adds the CPUFreq driver support for Marvell Armada 37xx SoCs. + The Armada 37xx PMU supports 4 frequency and VDD levels. + # big LITTLE core layer and glue drivers config ARM_BIG_LITTLE_CPUFREQ tristate "Generic ARM big LITTLE CPUfreq driver" @@ -12,6 +35,30 @@ config ARM_BIG_LITTLE_CPUFREQ help This enables the Generic CPUfreq driver for ARM big.LITTLE platforms. +config ARM_DT_BL_CPUFREQ + tristate "Generic probing via DT for ARM big LITTLE CPUfreq driver" + depends on ARM_BIG_LITTLE_CPUFREQ && OF + help + This enables probing via DT for Generic CPUfreq driver for ARM + big.LITTLE platform. This gets frequency tables from DT. + +config ARM_SCPI_CPUFREQ + tristate "SCPI based CPUfreq driver" + depends on ARM_BIG_LITTLE_CPUFREQ && ARM_SCPI_PROTOCOL && COMMON_CLK_SCPI + help + This adds the CPUfreq driver support for ARM big.LITTLE platforms + using SCPI protocol for CPU power management. + + This driver uses SCPI Message Protocol driver to interact with the + firmware providing the CPU DVFS functionality. + +config ARM_VEXPRESS_SPC_CPUFREQ + tristate "Versatile Express SPC based CPUfreq driver" + depends on ARM_BIG_LITTLE_CPUFREQ && ARCH_VEXPRESS_SPC + help + This add the CPUfreq driver support for Versatile Express + big.LITTLE platforms using SPC for power management. + config ARM_BRCMSTB_AVS_CPUFREQ tristate "Broadcom STB AVS CPUfreq driver" depends on ARCH_BRCMSTB || COMPILE_TEST @@ -33,20 +80,6 @@ config ARM_BRCMSTB_AVS_CPUFREQ_DEBUG If in doubt, say N. -config ARM_DT_BL_CPUFREQ - tristate "Generic probing via DT for ARM big LITTLE CPUfreq driver" - depends on ARM_BIG_LITTLE_CPUFREQ && OF - help - This enables probing via DT for Generic CPUfreq driver for ARM - big.LITTLE platform. This gets frequency tables from DT. - -config ARM_VEXPRESS_SPC_CPUFREQ - tristate "Versatile Express SPC based CPUfreq driver" - depends on ARM_BIG_LITTLE_CPUFREQ && ARCH_VEXPRESS_SPC - help - This add the CPUfreq driver support for Versatile Express - big.LITTLE platforms using SPC for power management. - config ARM_EXYNOS5440_CPUFREQ tristate "SAMSUNG EXYNOS5440" depends on SOC_EXYNOS5440 @@ -205,16 +238,6 @@ config ARM_SA1100_CPUFREQ config ARM_SA1110_CPUFREQ bool -config ARM_SCPI_CPUFREQ - tristate "SCPI based CPUfreq driver" - depends on ARM_BIG_LITTLE_CPUFREQ && ARM_SCPI_PROTOCOL && COMMON_CLK_SCPI - help - This adds the CPUfreq driver support for ARM big.LITTLE platforms - using SCPI protocol for CPU power management. - - This driver uses SCPI Message Protocol driver to interact with the - firmware providing the CPU DVFS functionality. - config ARM_SPEAR_CPUFREQ bool "SPEAr CPUFreq support" depends on PLAT_SPEAR @@ -275,20 +298,3 @@ config ARM_PXA2xx_CPUFREQ This add the CPUFreq driver support for Intel PXA2xx SOCs. If in doubt, say N. - -config ACPI_CPPC_CPUFREQ - tristate "CPUFreq driver based on the ACPI CPPC spec" - depends on ACPI_PROCESSOR - select ACPI_CPPC_LIB - default n - help - This adds a CPUFreq driver which uses CPPC methods - as described in the ACPIv5.1 spec. CPPC stands for - Collaborative Processor Performance Controls. It - is based on an abstract continuous scale of CPU - performance values which allows the remote power - processor to flexibly optimize for power and - performance. CPPC relies on power management firmware - support for its operation. - - If in doubt, say N. diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 812f9e0d01a3..e07715ce8844 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -52,23 +52,26 @@ obj-$(CONFIG_ARM_BIG_LITTLE_CPUFREQ) += arm_big_little.o # LITTLE drivers, so that it is probed last. obj-$(CONFIG_ARM_DT_BL_CPUFREQ) += arm_big_little_dt.o +obj-$(CONFIG_ARM_ARMADA_37XX_CPUFREQ) += armada-37xx-cpufreq.o obj-$(CONFIG_ARM_BRCMSTB_AVS_CPUFREQ) += brcmstb-avs-cpufreq.o +obj-$(CONFIG_ACPI_CPPC_CPUFREQ) += cppc_cpufreq.o obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ) += kirkwood-cpufreq.o obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ) += mediatek-cpufreq.o +obj-$(CONFIG_MACH_MVEBU_V7) += mvebu-cpufreq.o obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o -obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o -obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o obj-$(CONFIG_ARM_S3C2440_CPUFREQ) += s3c2440-cpufreq.o obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o +obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o +obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o obj-$(CONFIG_ARM_SA1100_CPUFREQ) += sa1100-cpufreq.o obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa1110-cpufreq.o @@ -81,8 +84,6 @@ obj-$(CONFIG_ARM_TEGRA124_CPUFREQ) += tegra124-cpufreq.o obj-$(CONFIG_ARM_TEGRA186_CPUFREQ) += tegra186-cpufreq.o obj-$(CONFIG_ARM_TI_CPUFREQ) += ti-cpufreq.o obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ) += vexpress-spc-cpufreq.o -obj-$(CONFIG_ACPI_CPPC_CPUFREQ) += cppc_cpufreq.o -obj-$(CONFIG_MACH_MVEBU_V7) += mvebu-cpufreq.o ################################################################################## diff --git a/drivers/cpufreq/arm_big_little.c b/drivers/cpufreq/arm_big_little.c index 65ec5f01aa8d..c56b57dcfda5 100644 --- a/drivers/cpufreq/arm_big_little.c +++ b/drivers/cpufreq/arm_big_little.c @@ -526,34 +526,13 @@ static int bL_cpufreq_exit(struct cpufreq_policy *policy) static void bL_cpufreq_ready(struct cpufreq_policy *policy) { - struct device *cpu_dev = get_cpu_device(policy->cpu); int cur_cluster = cpu_to_cluster(policy->cpu); - struct device_node *np; /* Do not register a cpu_cooling device if we are in IKS mode */ if (cur_cluster >= MAX_CLUSTERS) return; - np = of_node_get(cpu_dev->of_node); - if (WARN_ON(!np)) - return; - - if (of_find_property(np, "#cooling-cells", NULL)) { - u32 power_coefficient = 0; - - of_property_read_u32(np, "dynamic-power-coefficient", - &power_coefficient); - - cdev[cur_cluster] = of_cpufreq_power_cooling_register(np, - policy, power_coefficient, NULL); - if (IS_ERR(cdev[cur_cluster])) { - dev_err(cpu_dev, - "running cpufreq without cooling device: %ld\n", - PTR_ERR(cdev[cur_cluster])); - cdev[cur_cluster] = NULL; - } - } - of_node_put(np); + cdev[cur_cluster] = of_cpufreq_cooling_register(policy); } static struct cpufreq_driver bL_cpufreq_driver = { diff --git a/drivers/cpufreq/armada-37xx-cpufreq.c b/drivers/cpufreq/armada-37xx-cpufreq.c new file mode 100644 index 000000000000..c6ebc88a7d8d --- /dev/null +++ b/drivers/cpufreq/armada-37xx-cpufreq.c @@ -0,0 +1,241 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * CPU frequency scaling support for Armada 37xx platform. + * + * Copyright (C) 2017 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + */ + +#include <linux/clk.h> +#include <linux/cpu.h> +#include <linux/cpufreq.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> +#include <linux/pm_opp.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +/* Power management in North Bridge register set */ +#define ARMADA_37XX_NB_L0L1 0x18 +#define ARMADA_37XX_NB_L2L3 0x1C +#define ARMADA_37XX_NB_TBG_DIV_OFF 13 +#define ARMADA_37XX_NB_TBG_DIV_MASK 0x7 +#define ARMADA_37XX_NB_CLK_SEL_OFF 11 +#define ARMADA_37XX_NB_CLK_SEL_MASK 0x1 +#define ARMADA_37XX_NB_CLK_SEL_TBG 0x1 +#define ARMADA_37XX_NB_TBG_SEL_OFF 9 +#define ARMADA_37XX_NB_TBG_SEL_MASK 0x3 +#define ARMADA_37XX_NB_VDD_SEL_OFF 6 +#define ARMADA_37XX_NB_VDD_SEL_MASK 0x3 +#define ARMADA_37XX_NB_CONFIG_SHIFT 16 +#define ARMADA_37XX_NB_DYN_MOD 0x24 +#define ARMADA_37XX_NB_CLK_SEL_EN BIT(26) +#define ARMADA_37XX_NB_TBG_EN BIT(28) +#define ARMADA_37XX_NB_DIV_EN BIT(29) +#define ARMADA_37XX_NB_VDD_EN BIT(30) +#define ARMADA_37XX_NB_DFS_EN BIT(31) +#define ARMADA_37XX_NB_CPU_LOAD 0x30 +#define ARMADA_37XX_NB_CPU_LOAD_MASK 0x3 +#define ARMADA_37XX_DVFS_LOAD_0 0 +#define ARMADA_37XX_DVFS_LOAD_1 1 +#define ARMADA_37XX_DVFS_LOAD_2 2 +#define ARMADA_37XX_DVFS_LOAD_3 3 + +/* + * On Armada 37xx the Power management manages 4 level of CPU load, + * each level can be associated with a CPU clock source, a CPU + * divider, a VDD level, etc... + */ +#define LOAD_LEVEL_NR 4 + +struct armada_37xx_dvfs { + u32 cpu_freq_max; + u8 divider[LOAD_LEVEL_NR]; +}; + +static struct armada_37xx_dvfs armada_37xx_dvfs[] = { + {.cpu_freq_max = 1200*1000*1000, .divider = {1, 2, 4, 6} }, + {.cpu_freq_max = 1000*1000*1000, .divider = {1, 2, 4, 5} }, + {.cpu_freq_max = 800*1000*1000, .divider = {1, 2, 3, 4} }, + {.cpu_freq_max = 600*1000*1000, .divider = {2, 4, 5, 6} }, +}; + +static struct armada_37xx_dvfs *armada_37xx_cpu_freq_info_get(u32 freq) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(armada_37xx_dvfs); i++) { + if (freq == armada_37xx_dvfs[i].cpu_freq_max) + return &armada_37xx_dvfs[i]; + } + + pr_err("Unsupported CPU frequency %d MHz\n", freq/1000000); + return NULL; +} + +/* + * Setup the four level managed by the hardware. Once the four level + * will be configured then the DVFS will be enabled. + */ +static void __init armada37xx_cpufreq_dvfs_setup(struct regmap *base, + struct clk *clk, u8 *divider) +{ + int load_lvl; + struct clk *parent; + + for (load_lvl = 0; load_lvl < LOAD_LEVEL_NR; load_lvl++) { + unsigned int reg, mask, val, offset = 0; + + if (load_lvl <= ARMADA_37XX_DVFS_LOAD_1) + reg = ARMADA_37XX_NB_L0L1; + else + reg = ARMADA_37XX_NB_L2L3; + + if (load_lvl == ARMADA_37XX_DVFS_LOAD_0 || + load_lvl == ARMADA_37XX_DVFS_LOAD_2) + offset += ARMADA_37XX_NB_CONFIG_SHIFT; + + /* Set cpu clock source, for all the level we use TBG */ + val = ARMADA_37XX_NB_CLK_SEL_TBG << ARMADA_37XX_NB_CLK_SEL_OFF; + mask = (ARMADA_37XX_NB_CLK_SEL_MASK + << ARMADA_37XX_NB_CLK_SEL_OFF); + + /* + * Set cpu divider based on the pre-computed array in + * order to have balanced step. + */ + val |= divider[load_lvl] << ARMADA_37XX_NB_TBG_DIV_OFF; + mask |= (ARMADA_37XX_NB_TBG_DIV_MASK + << ARMADA_37XX_NB_TBG_DIV_OFF); + + /* Set VDD divider which is actually the load level. */ + val |= load_lvl << ARMADA_37XX_NB_VDD_SEL_OFF; + mask |= (ARMADA_37XX_NB_VDD_SEL_MASK + << ARMADA_37XX_NB_VDD_SEL_OFF); + + val <<= offset; + mask <<= offset; + + regmap_update_bits(base, reg, mask, val); + } + + /* + * Set cpu clock source, for all the level we keep the same + * clock source that the one already configured. For this one + * we need to use the clock framework + */ + parent = clk_get_parent(clk); + clk_set_parent(clk, parent); +} + +static void __init armada37xx_cpufreq_disable_dvfs(struct regmap *base) +{ + unsigned int reg = ARMADA_37XX_NB_DYN_MOD, + mask = ARMADA_37XX_NB_DFS_EN; + + regmap_update_bits(base, reg, mask, 0); +} + +static void __init armada37xx_cpufreq_enable_dvfs(struct regmap *base) +{ + unsigned int val, reg = ARMADA_37XX_NB_CPU_LOAD, + mask = ARMADA_37XX_NB_CPU_LOAD_MASK; + + /* Start with the highest load (0) */ + val = ARMADA_37XX_DVFS_LOAD_0; + regmap_update_bits(base, reg, mask, val); + + /* Now enable DVFS for the CPUs */ + reg = ARMADA_37XX_NB_DYN_MOD; + mask = ARMADA_37XX_NB_CLK_SEL_EN | ARMADA_37XX_NB_TBG_EN | + ARMADA_37XX_NB_DIV_EN | ARMADA_37XX_NB_VDD_EN | + ARMADA_37XX_NB_DFS_EN; + + regmap_update_bits(base, reg, mask, mask); +} + +static int __init armada37xx_cpufreq_driver_init(void) +{ + struct armada_37xx_dvfs *dvfs; + struct platform_device *pdev; + unsigned int cur_frequency; + struct regmap *nb_pm_base; + struct device *cpu_dev; + int load_lvl, ret; + struct clk *clk; + + nb_pm_base = + syscon_regmap_lookup_by_compatible("marvell,armada-3700-nb-pm"); + + if (IS_ERR(nb_pm_base)) + return -ENODEV; + + /* Before doing any configuration on the DVFS first, disable it */ + armada37xx_cpufreq_disable_dvfs(nb_pm_base); + + /* + * On CPU 0 register the operating points supported (which are + * the nominal CPU frequency and full integer divisions of + * it). + */ + cpu_dev = get_cpu_device(0); + if (!cpu_dev) { + dev_err(cpu_dev, "Cannot get CPU\n"); + return -ENODEV; + } + + clk = clk_get(cpu_dev, 0); + if (IS_ERR(clk)) { + dev_err(cpu_dev, "Cannot get clock for CPU0\n"); + return PTR_ERR(clk); + } + + /* Get nominal (current) CPU frequency */ + cur_frequency = clk_get_rate(clk); + if (!cur_frequency) { + dev_err(cpu_dev, "Failed to get clock rate for CPU\n"); + return -EINVAL; + } + + dvfs = armada_37xx_cpu_freq_info_get(cur_frequency); + if (!dvfs) + return -EINVAL; + + armada37xx_cpufreq_dvfs_setup(nb_pm_base, clk, dvfs->divider); + + for (load_lvl = ARMADA_37XX_DVFS_LOAD_0; load_lvl < LOAD_LEVEL_NR; + load_lvl++) { + unsigned long freq = cur_frequency / dvfs->divider[load_lvl]; + + ret = dev_pm_opp_add(cpu_dev, freq, 0); + if (ret) { + /* clean-up the already added opp before leaving */ + while (load_lvl-- > ARMADA_37XX_DVFS_LOAD_0) { + freq = cur_frequency / dvfs->divider[load_lvl]; + dev_pm_opp_remove(cpu_dev, freq); + } + return ret; + } + } + + /* Now that everything is setup, enable the DVFS at hardware level */ + armada37xx_cpufreq_enable_dvfs(nb_pm_base); + + pdev = platform_device_register_simple("cpufreq-dt", -1, NULL, 0); + + return PTR_ERR_OR_ZERO(pdev); +} +/* late_initcall, to guarantee the driver is loaded after A37xx clock driver */ +late_initcall(armada37xx_cpufreq_driver_init); + +MODULE_AUTHOR("Gregory CLEMENT <gregory.clement@free-electrons.com>"); +MODULE_DESCRIPTION("Armada 37xx cpufreq driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c index ecc56e26f8f6..3b585e4bfac5 100644 --- a/drivers/cpufreq/cpufreq-dt-platdev.c +++ b/drivers/cpufreq/cpufreq-dt-platdev.c @@ -108,6 +108,14 @@ static const struct of_device_id blacklist[] __initconst = { { .compatible = "marvell,armadaxp", }, + { .compatible = "mediatek,mt2701", }, + { .compatible = "mediatek,mt2712", }, + { .compatible = "mediatek,mt7622", }, + { .compatible = "mediatek,mt7623", }, + { .compatible = "mediatek,mt817x", }, + { .compatible = "mediatek,mt8173", }, + { .compatible = "mediatek,mt8176", }, + { .compatible = "nvidia,tegra124", }, { .compatible = "st,stih407", }, diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c index 545946ad0752..de3d104c25d7 100644 --- a/drivers/cpufreq/cpufreq-dt.c +++ b/drivers/cpufreq/cpufreq-dt.c @@ -319,33 +319,8 @@ static int cpufreq_exit(struct cpufreq_policy *policy) static void cpufreq_ready(struct cpufreq_policy *policy) { struct private_data *priv = policy->driver_data; - struct device_node *np = of_node_get(priv->cpu_dev->of_node); - if (WARN_ON(!np)) - return; - - /* - * For now, just loading the cooling device; - * thermal DT code takes care of matching them. - */ - if (of_find_property(np, "#cooling-cells", NULL)) { - u32 power_coefficient = 0; - - of_property_read_u32(np, "dynamic-power-coefficient", - &power_coefficient); - - priv->cdev = of_cpufreq_power_cooling_register(np, - policy, power_coefficient, NULL); - if (IS_ERR(priv->cdev)) { - dev_err(priv->cpu_dev, - "running cpufreq without cooling device: %ld\n", - PTR_ERR(priv->cdev)); - - priv->cdev = NULL; - } - } - - of_node_put(np); + priv->cdev = of_cpufreq_cooling_register(policy); } static struct cpufreq_driver dt_cpufreq_driver = { diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 41d148af7748..421f318c0e66 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -601,19 +601,18 @@ static struct cpufreq_governor *find_governor(const char *str_governor) /** * cpufreq_parse_governor - parse a governor string */ -static int cpufreq_parse_governor(char *str_governor, unsigned int *policy, - struct cpufreq_governor **governor) +static int cpufreq_parse_governor(char *str_governor, + struct cpufreq_policy *policy) { - int err = -EINVAL; - if (cpufreq_driver->setpolicy) { if (!strncasecmp(str_governor, "performance", CPUFREQ_NAME_LEN)) { - *policy = CPUFREQ_POLICY_PERFORMANCE; - err = 0; - } else if (!strncasecmp(str_governor, "powersave", - CPUFREQ_NAME_LEN)) { - *policy = CPUFREQ_POLICY_POWERSAVE; - err = 0; + policy->policy = CPUFREQ_POLICY_PERFORMANCE; + return 0; + } + + if (!strncasecmp(str_governor, "powersave", CPUFREQ_NAME_LEN)) { + policy->policy = CPUFREQ_POLICY_POWERSAVE; + return 0; } } else { struct cpufreq_governor *t; @@ -621,26 +620,31 @@ static int cpufreq_parse_governor(char *str_governor, unsigned int *policy, mutex_lock(&cpufreq_governor_mutex); t = find_governor(str_governor); - - if (t == NULL) { + if (!t) { int ret; mutex_unlock(&cpufreq_governor_mutex); + ret = request_module("cpufreq_%s", str_governor); - mutex_lock(&cpufreq_governor_mutex); + if (ret) + return -EINVAL; - if (ret == 0) - t = find_governor(str_governor); - } + mutex_lock(&cpufreq_governor_mutex); - if (t != NULL) { - *governor = t; - err = 0; + t = find_governor(str_governor); } + if (t && !try_module_get(t->owner)) + t = NULL; mutex_unlock(&cpufreq_governor_mutex); + + if (t) { + policy->governor = t; + return 0; + } } - return err; + + return -EINVAL; } /** @@ -760,11 +764,14 @@ static ssize_t store_scaling_governor(struct cpufreq_policy *policy, if (ret != 1) return -EINVAL; - if (cpufreq_parse_governor(str_governor, &new_policy.policy, - &new_policy.governor)) + if (cpufreq_parse_governor(str_governor, &new_policy)) return -EINVAL; ret = cpufreq_set_policy(policy, &new_policy); + + if (new_policy.governor) + module_put(new_policy.governor->owner); + return ret ? ret : count; } @@ -1044,8 +1051,7 @@ static int cpufreq_init_policy(struct cpufreq_policy *policy) if (policy->last_policy) new_policy.policy = policy->last_policy; else - cpufreq_parse_governor(gov->name, &new_policy.policy, - NULL); + cpufreq_parse_governor(gov->name, &new_policy); } /* set default policy */ return cpufreq_set_policy(policy, &new_policy); @@ -2160,7 +2166,6 @@ void cpufreq_unregister_governor(struct cpufreq_governor *governor) mutex_lock(&cpufreq_governor_mutex); list_del(&governor->governor_list); mutex_unlock(&cpufreq_governor_mutex); - return; } EXPORT_SYMBOL_GPL(cpufreq_unregister_governor); diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c index 1e55b5790853..1572129844a5 100644 --- a/drivers/cpufreq/cpufreq_stats.c +++ b/drivers/cpufreq/cpufreq_stats.c @@ -27,7 +27,7 @@ struct cpufreq_stats { unsigned int *trans_table; }; -static int cpufreq_stats_update(struct cpufreq_stats *stats) +static void cpufreq_stats_update(struct cpufreq_stats *stats) { unsigned long long cur_time = get_jiffies_64(); @@ -35,7 +35,6 @@ static int cpufreq_stats_update(struct cpufreq_stats *stats) stats->time_in_state[stats->last_index] += cur_time - stats->last_time; stats->last_time = cur_time; spin_unlock(&cpufreq_stats_lock); - return 0; } static void cpufreq_stats_clear_table(struct cpufreq_stats *stats) diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c index d9b2c2de49c4..741f22e5cee3 100644 --- a/drivers/cpufreq/imx6q-cpufreq.c +++ b/drivers/cpufreq/imx6q-cpufreq.c @@ -25,15 +25,29 @@ static struct regulator *arm_reg; static struct regulator *pu_reg; static struct regulator *soc_reg; -static struct clk *arm_clk; -static struct clk *pll1_sys_clk; -static struct clk *pll1_sw_clk; -static struct clk *step_clk; -static struct clk *pll2_pfd2_396m_clk; - -/* clk used by i.MX6UL */ -static struct clk *pll2_bus_clk; -static struct clk *secondary_sel_clk; +enum IMX6_CPUFREQ_CLKS { + ARM, + PLL1_SYS, + STEP, + PLL1_SW, + PLL2_PFD2_396M, + /* MX6UL requires two more clks */ + PLL2_BUS, + SECONDARY_SEL, +}; +#define IMX6Q_CPUFREQ_CLK_NUM 5 +#define IMX6UL_CPUFREQ_CLK_NUM 7 + +static int num_clks; +static struct clk_bulk_data clks[] = { + { .id = "arm" }, + { .id = "pll1_sys" }, + { .id = "step" }, + { .id = "pll1_sw" }, + { .id = "pll2_pfd2_396m" }, + { .id = "pll2_bus" }, + { .id = "secondary_sel" }, +}; static struct device *cpu_dev; static bool free_opp; @@ -53,7 +67,7 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index) new_freq = freq_table[index].frequency; freq_hz = new_freq * 1000; - old_freq = clk_get_rate(arm_clk) / 1000; + old_freq = clk_get_rate(clks[ARM].clk) / 1000; opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_hz); if (IS_ERR(opp)) { @@ -112,29 +126,35 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index) * voltage of 528MHz, so lower the CPU frequency to one * half before changing CPU frequency. */ - clk_set_rate(arm_clk, (old_freq >> 1) * 1000); - clk_set_parent(pll1_sw_clk, pll1_sys_clk); - if (freq_hz > clk_get_rate(pll2_pfd2_396m_clk)) - clk_set_parent(secondary_sel_clk, pll2_bus_clk); + clk_set_rate(clks[ARM].clk, (old_freq >> 1) * 1000); + clk_set_parent(clks[PLL1_SW].clk, clks[PLL1_SYS].clk); + if (freq_hz > clk_get_rate(clks[PLL2_PFD2_396M].clk)) + clk_set_parent(clks[SECONDARY_SEL].clk, + clks[PLL2_BUS].clk); else - clk_set_parent(secondary_sel_clk, pll2_pfd2_396m_clk); - clk_set_parent(step_clk, secondary_sel_clk); - clk_set_parent(pll1_sw_clk, step_clk); + clk_set_parent(clks[SECONDARY_SEL].clk, + clks[PLL2_PFD2_396M].clk); + clk_set_parent(clks[STEP].clk, clks[SECONDARY_SEL].clk); + clk_set_parent(clks[PLL1_SW].clk, clks[STEP].clk); + if (freq_hz > clk_get_rate(clks[PLL2_BUS].clk)) { + clk_set_rate(clks[PLL1_SYS].clk, new_freq * 1000); + clk_set_parent(clks[PLL1_SW].clk, clks[PLL1_SYS].clk); + } } else { - clk_set_parent(step_clk, pll2_pfd2_396m_clk); - clk_set_parent(pll1_sw_clk, step_clk); - if (freq_hz > clk_get_rate(pll2_pfd2_396m_clk)) { - clk_set_rate(pll1_sys_clk, new_freq * 1000); - clk_set_parent(pll1_sw_clk, pll1_sys_clk); + clk_set_parent(clks[STEP].clk, clks[PLL2_PFD2_396M].clk); + clk_set_parent(clks[PLL1_SW].clk, clks[STEP].clk); + if (freq_hz > clk_get_rate(clks[PLL2_PFD2_396M].clk)) { + clk_set_rate(clks[PLL1_SYS].clk, new_freq * 1000); + clk_set_parent(clks[PLL1_SW].clk, clks[PLL1_SYS].clk); } else { /* pll1_sys needs to be enabled for divider rate change to work. */ pll1_sys_temp_enabled = true; - clk_prepare_enable(pll1_sys_clk); + clk_prepare_enable(clks[PLL1_SYS].clk); } } /* Ensure the arm clock divider is what we expect */ - ret = clk_set_rate(arm_clk, new_freq * 1000); + ret = clk_set_rate(clks[ARM].clk, new_freq * 1000); if (ret) { dev_err(cpu_dev, "failed to set clock rate: %d\n", ret); regulator_set_voltage_tol(arm_reg, volt_old, 0); @@ -143,7 +163,7 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index) /* PLL1 is only needed until after ARM-PODF is set. */ if (pll1_sys_temp_enabled) - clk_disable_unprepare(pll1_sys_clk); + clk_disable_unprepare(clks[PLL1_SYS].clk); /* scaling down? scale voltage after frequency */ if (new_freq < old_freq) { @@ -174,7 +194,7 @@ static int imx6q_cpufreq_init(struct cpufreq_policy *policy) { int ret; - policy->clk = arm_clk; + policy->clk = clks[ARM].clk; ret = cpufreq_generic_init(policy, freq_table, transition_latency); policy->suspend_freq = policy->max; @@ -244,6 +264,43 @@ put_node: of_node_put(np); } +#define OCOTP_CFG3_6UL_SPEED_696MHZ 0x2 + +static void imx6ul_opp_check_speed_grading(struct device *dev) +{ + struct device_node *np; + void __iomem *base; + u32 val; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx6ul-ocotp"); + if (!np) + return; + + base = of_iomap(np, 0); + if (!base) { + dev_err(dev, "failed to map ocotp\n"); + goto put_node; + } + + /* + * Speed GRADING[1:0] defines the max speed of ARM: + * 2b'00: Reserved; + * 2b'01: 528000000Hz; + * 2b'10: 696000000Hz; + * 2b'11: Reserved; + * We need to set the max speed of ARM according to fuse map. + */ + val = readl_relaxed(base + OCOTP_CFG3); + val >>= OCOTP_CFG3_SPEED_SHIFT; + val &= 0x3; + if (val != OCOTP_CFG3_6UL_SPEED_696MHZ) + if (dev_pm_opp_disable(dev, 696000000)) + dev_warn(dev, "failed to disable 696MHz OPP\n"); + iounmap(base); +put_node: + of_node_put(np); +} + static int imx6q_cpufreq_probe(struct platform_device *pdev) { struct device_node *np; @@ -266,28 +323,15 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev) return -ENOENT; } - arm_clk = clk_get(cpu_dev, "arm"); - pll1_sys_clk = clk_get(cpu_dev, "pll1_sys"); - pll1_sw_clk = clk_get(cpu_dev, "pll1_sw"); - step_clk = clk_get(cpu_dev, "step"); - pll2_pfd2_396m_clk = clk_get(cpu_dev, "pll2_pfd2_396m"); - if (IS_ERR(arm_clk) || IS_ERR(pll1_sys_clk) || IS_ERR(pll1_sw_clk) || - IS_ERR(step_clk) || IS_ERR(pll2_pfd2_396m_clk)) { - dev_err(cpu_dev, "failed to get clocks\n"); - ret = -ENOENT; - goto put_clk; - } - if (of_machine_is_compatible("fsl,imx6ul") || - of_machine_is_compatible("fsl,imx6ull")) { - pll2_bus_clk = clk_get(cpu_dev, "pll2_bus"); - secondary_sel_clk = clk_get(cpu_dev, "secondary_sel"); - if (IS_ERR(pll2_bus_clk) || IS_ERR(secondary_sel_clk)) { - dev_err(cpu_dev, "failed to get clocks specific to imx6ul\n"); - ret = -ENOENT; - goto put_clk; - } - } + of_machine_is_compatible("fsl,imx6ull")) + num_clks = IMX6UL_CPUFREQ_CLK_NUM; + else + num_clks = IMX6Q_CPUFREQ_CLK_NUM; + + ret = clk_bulk_get(cpu_dev, num_clks, clks); + if (ret) + goto put_node; arm_reg = regulator_get(cpu_dev, "arm"); pu_reg = regulator_get_optional(cpu_dev, "pu"); @@ -311,7 +355,10 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev) goto put_reg; } - imx6q_opp_check_speed_grading(cpu_dev); + if (of_machine_is_compatible("fsl,imx6ul")) + imx6ul_opp_check_speed_grading(cpu_dev); + else + imx6q_opp_check_speed_grading(cpu_dev); /* Because we have added the OPPs here, we must free them */ free_opp = true; @@ -424,22 +471,11 @@ put_reg: regulator_put(pu_reg); if (!IS_ERR(soc_reg)) regulator_put(soc_reg); -put_clk: - if (!IS_ERR(arm_clk)) - clk_put(arm_clk); - if (!IS_ERR(pll1_sys_clk)) - clk_put(pll1_sys_clk); - if (!IS_ERR(pll1_sw_clk)) - clk_put(pll1_sw_clk); - if (!IS_ERR(step_clk)) - clk_put(step_clk); - if (!IS_ERR(pll2_pfd2_396m_clk)) - clk_put(pll2_pfd2_396m_clk); - if (!IS_ERR(pll2_bus_clk)) - clk_put(pll2_bus_clk); - if (!IS_ERR(secondary_sel_clk)) - clk_put(secondary_sel_clk); + + clk_bulk_put(num_clks, clks); +put_node: of_node_put(np); + return ret; } @@ -453,13 +489,8 @@ static int imx6q_cpufreq_remove(struct platform_device *pdev) if (!IS_ERR(pu_reg)) regulator_put(pu_reg); regulator_put(soc_reg); - clk_put(arm_clk); - clk_put(pll1_sys_clk); - clk_put(pll1_sw_clk); - clk_put(step_clk); - clk_put(pll2_pfd2_396m_clk); - clk_put(pll2_bus_clk); - clk_put(secondary_sel_clk); + + clk_bulk_put(num_clks, clks); return 0; } diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 93a0e88bef76..7edf7a0e5a96 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -1595,15 +1595,6 @@ static const struct pstate_funcs knl_funcs = { .get_val = core_get_val, }; -static const struct pstate_funcs bxt_funcs = { - .get_max = core_get_max_pstate, - .get_max_physical = core_get_max_pstate_physical, - .get_min = core_get_min_pstate, - .get_turbo = core_get_turbo_pstate, - .get_scaling = core_get_scaling, - .get_val = core_get_val, -}; - #define ICPU(model, policy) \ { X86_VENDOR_INTEL, 6, model, X86_FEATURE_APERFMPERF,\ (unsigned long)&policy } @@ -1627,8 +1618,9 @@ static const struct x86_cpu_id intel_pstate_cpu_ids[] = { ICPU(INTEL_FAM6_BROADWELL_XEON_D, core_funcs), ICPU(INTEL_FAM6_XEON_PHI_KNL, knl_funcs), ICPU(INTEL_FAM6_XEON_PHI_KNM, knl_funcs), - ICPU(INTEL_FAM6_ATOM_GOLDMONT, bxt_funcs), - ICPU(INTEL_FAM6_ATOM_GEMINI_LAKE, bxt_funcs), + ICPU(INTEL_FAM6_ATOM_GOLDMONT, core_funcs), + ICPU(INTEL_FAM6_ATOM_GEMINI_LAKE, core_funcs), + ICPU(INTEL_FAM6_SKYLAKE_X, core_funcs), {} }; MODULE_DEVICE_TABLE(x86cpu, intel_pstate_cpu_ids); diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c index c46a12df40dd..5faa37c5b091 100644 --- a/drivers/cpufreq/longhaul.c +++ b/drivers/cpufreq/longhaul.c @@ -894,7 +894,7 @@ static int longhaul_cpu_init(struct cpufreq_policy *policy) if ((longhaul_version != TYPE_LONGHAUL_V1) && (scale_voltage != 0)) longhaul_setup_voltagescaling(); - policy->cpuinfo.transition_latency = 200000; /* nsec */ + policy->transition_delay_us = 200000; /* usec */ return cpufreq_table_validate_and_show(policy, longhaul_table); } diff --git a/drivers/cpufreq/mediatek-cpufreq.c b/drivers/cpufreq/mediatek-cpufreq.c index e0d5090b303d..8c04dddd3c28 100644 --- a/drivers/cpufreq/mediatek-cpufreq.c +++ b/drivers/cpufreq/mediatek-cpufreq.c @@ -310,28 +310,8 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy, static void mtk_cpufreq_ready(struct cpufreq_policy *policy) { struct mtk_cpu_dvfs_info *info = policy->driver_data; - struct device_node *np = of_node_get(info->cpu_dev->of_node); - u32 capacitance = 0; - if (WARN_ON(!np)) - return; - - if (of_find_property(np, "#cooling-cells", NULL)) { - of_property_read_u32(np, DYNAMIC_POWER, &capacitance); - - info->cdev = of_cpufreq_power_cooling_register(np, - policy, capacitance, NULL); - - if (IS_ERR(info->cdev)) { - dev_err(info->cpu_dev, - "running cpufreq without cooling device: %ld\n", - PTR_ERR(info->cdev)); - - info->cdev = NULL; - } - } - - of_node_put(np); + info->cdev = of_cpufreq_cooling_register(policy); } static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu) @@ -574,6 +554,7 @@ static struct platform_driver mtk_cpufreq_platdrv = { /* List of machines supported by this driver */ static const struct of_device_id mtk_cpufreq_machines[] __initconst = { { .compatible = "mediatek,mt2701", }, + { .compatible = "mediatek,mt2712", }, { .compatible = "mediatek,mt7622", }, { .compatible = "mediatek,mt7623", }, { .compatible = "mediatek,mt817x", }, diff --git a/drivers/cpufreq/mvebu-cpufreq.c b/drivers/cpufreq/mvebu-cpufreq.c index ed915ee85dd9..31513bd42705 100644 --- a/drivers/cpufreq/mvebu-cpufreq.c +++ b/drivers/cpufreq/mvebu-cpufreq.c @@ -76,12 +76,6 @@ static int __init armada_xp_pmsu_cpufreq_init(void) return PTR_ERR(clk); } - /* - * In case of a failure of dev_pm_opp_add(), we don't - * bother with cleaning up the registered OPP (there's - * no function to do so), and simply cancel the - * registration of the cpufreq device. - */ ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk), 0); if (ret) { clk_put(clk); @@ -91,7 +85,8 @@ static int __init armada_xp_pmsu_cpufreq_init(void) ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk) / 2, 0); if (ret) { clk_put(clk); - return ret; + dev_err(cpu_dev, "Failed to register OPPs\n"); + goto opp_register_failed; } ret = dev_pm_opp_set_sharing_cpus(cpu_dev, @@ -99,9 +94,16 @@ static int __init armada_xp_pmsu_cpufreq_init(void) if (ret) dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n", __func__, ret); + clk_put(clk); } platform_device_register_simple("cpufreq-dt", -1, NULL, 0); return 0; + +opp_register_failed: + /* As registering has failed remove all the opp for all cpus */ + dev_pm_opp_cpumask_remove_table(cpu_possible_mask); + + return ret; } device_initcall(armada_xp_pmsu_cpufreq_init); diff --git a/drivers/cpufreq/powernv-cpufreq.c b/drivers/cpufreq/powernv-cpufreq.c index b6d7c4c98d0a..29cdec198657 100644 --- a/drivers/cpufreq/powernv-cpufreq.c +++ b/drivers/cpufreq/powernv-cpufreq.c @@ -29,6 +29,7 @@ #include <linux/reboot.h> #include <linux/slab.h> #include <linux/cpu.h> +#include <linux/hashtable.h> #include <trace/events/power.h> #include <asm/cputhreads.h> @@ -38,14 +39,13 @@ #include <asm/opal.h> #include <linux/timer.h> -#define POWERNV_MAX_PSTATES 256 +#define POWERNV_MAX_PSTATES_ORDER 8 +#define POWERNV_MAX_PSTATES (1UL << (POWERNV_MAX_PSTATES_ORDER)) #define PMSR_PSAFE_ENABLE (1UL << 30) #define PMSR_SPR_EM_DISABLE (1UL << 31) -#define PMSR_MAX(x) ((x >> 32) & 0xFF) +#define MAX_PSTATE_SHIFT 32 #define LPSTATE_SHIFT 48 #define GPSTATE_SHIFT 56 -#define GET_LPSTATE(x) (((x) >> LPSTATE_SHIFT) & 0xFF) -#define GET_GPSTATE(x) (((x) >> GPSTATE_SHIFT) & 0xFF) #define MAX_RAMP_DOWN_TIME 5120 /* @@ -94,6 +94,27 @@ struct global_pstate_info { }; static struct cpufreq_frequency_table powernv_freqs[POWERNV_MAX_PSTATES+1]; + +DEFINE_HASHTABLE(pstate_revmap, POWERNV_MAX_PSTATES_ORDER); +/** + * struct pstate_idx_revmap_data: Entry in the hashmap pstate_revmap + * indexed by a function of pstate id. + * + * @pstate_id: pstate id for this entry. + * + * @cpufreq_table_idx: Index into the powernv_freqs + * cpufreq_frequency_table for frequency + * corresponding to pstate_id. + * + * @hentry: hlist_node that hooks this entry into the pstate_revmap + * hashtable + */ +struct pstate_idx_revmap_data { + u8 pstate_id; + unsigned int cpufreq_table_idx; + struct hlist_node hentry; +}; + static bool rebooting, throttled, occ_reset; static const char * const throttle_reason[] = { @@ -148,39 +169,56 @@ static struct powernv_pstate_info { bool wof_enabled; } powernv_pstate_info; -/* Use following macros for conversions between pstate_id and index */ -static inline int idx_to_pstate(unsigned int i) +static inline u8 extract_pstate(u64 pmsr_val, unsigned int shift) +{ + return ((pmsr_val >> shift) & 0xFF); +} + +#define extract_local_pstate(x) extract_pstate(x, LPSTATE_SHIFT) +#define extract_global_pstate(x) extract_pstate(x, GPSTATE_SHIFT) +#define extract_max_pstate(x) extract_pstate(x, MAX_PSTATE_SHIFT) + +/* Use following functions for conversions between pstate_id and index */ + +/** + * idx_to_pstate : Returns the pstate id corresponding to the + * frequency in the cpufreq frequency table + * powernv_freqs indexed by @i. + * + * If @i is out of bound, this will return the pstate + * corresponding to the nominal frequency. + */ +static inline u8 idx_to_pstate(unsigned int i) { if (unlikely(i >= powernv_pstate_info.nr_pstates)) { - pr_warn_once("index %u is out of bound\n", i); + pr_warn_once("idx_to_pstate: index %u is out of bound\n", i); return powernv_freqs[powernv_pstate_info.nominal].driver_data; } return powernv_freqs[i].driver_data; } -static inline unsigned int pstate_to_idx(int pstate) +/** + * pstate_to_idx : Returns the index in the cpufreq frequencytable + * powernv_freqs for the frequency whose corresponding + * pstate id is @pstate. + * + * If no frequency corresponding to @pstate is found, + * this will return the index of the nominal + * frequency. + */ +static unsigned int pstate_to_idx(u8 pstate) { - int min = powernv_freqs[powernv_pstate_info.min].driver_data; - int max = powernv_freqs[powernv_pstate_info.max].driver_data; + unsigned int key = pstate % POWERNV_MAX_PSTATES; + struct pstate_idx_revmap_data *revmap_data; - if (min > 0) { - if (unlikely((pstate < max) || (pstate > min))) { - pr_warn_once("pstate %d is out of bound\n", pstate); - return powernv_pstate_info.nominal; - } - } else { - if (unlikely((pstate > max) || (pstate < min))) { - pr_warn_once("pstate %d is out of bound\n", pstate); - return powernv_pstate_info.nominal; - } + hash_for_each_possible(pstate_revmap, revmap_data, hentry, key) { + if (revmap_data->pstate_id == pstate) + return revmap_data->cpufreq_table_idx; } - /* - * abs() is deliberately used so that is works with - * both monotonically increasing and decreasing - * pstate values - */ - return abs(pstate - idx_to_pstate(powernv_pstate_info.max)); + + pr_warn_once("pstate_to_idx: pstate 0x%x not found\n", pstate); + return powernv_pstate_info.nominal; } static inline void reset_gpstates(struct cpufreq_policy *policy) @@ -247,7 +285,7 @@ static int init_powernv_pstates(void) powernv_pstate_info.wof_enabled = true; next: - pr_info("cpufreq pstate min %d nominal %d max %d\n", pstate_min, + pr_info("cpufreq pstate min 0x%x nominal 0x%x max 0x%x\n", pstate_min, pstate_nominal, pstate_max); pr_info("Workload Optimized Frequency is %s in the platform\n", (powernv_pstate_info.wof_enabled) ? "enabled" : "disabled"); @@ -278,19 +316,30 @@ next: powernv_pstate_info.nr_pstates = nr_pstates; pr_debug("NR PStates %d\n", nr_pstates); + for (i = 0; i < nr_pstates; i++) { u32 id = be32_to_cpu(pstate_ids[i]); u32 freq = be32_to_cpu(pstate_freqs[i]); + struct pstate_idx_revmap_data *revmap_data; + unsigned int key; pr_debug("PState id %d freq %d MHz\n", id, freq); powernv_freqs[i].frequency = freq * 1000; /* kHz */ - powernv_freqs[i].driver_data = id; + powernv_freqs[i].driver_data = id & 0xFF; + + revmap_data = (struct pstate_idx_revmap_data *) + kmalloc(sizeof(*revmap_data), GFP_KERNEL); + + revmap_data->pstate_id = id & 0xFF; + revmap_data->cpufreq_table_idx = i; + key = (revmap_data->pstate_id) % POWERNV_MAX_PSTATES; + hash_add(pstate_revmap, &revmap_data->hentry, key); if (id == pstate_max) powernv_pstate_info.max = i; - else if (id == pstate_nominal) + if (id == pstate_nominal) powernv_pstate_info.nominal = i; - else if (id == pstate_min) + if (id == pstate_min) powernv_pstate_info.min = i; if (powernv_pstate_info.wof_enabled && id == pstate_turbo) { @@ -307,14 +356,13 @@ next: } /* Returns the CPU frequency corresponding to the pstate_id. */ -static unsigned int pstate_id_to_freq(int pstate_id) +static unsigned int pstate_id_to_freq(u8 pstate_id) { int i; i = pstate_to_idx(pstate_id); if (i >= powernv_pstate_info.nr_pstates || i < 0) { - pr_warn("PState id %d outside of PState table, " - "reporting nominal id %d instead\n", + pr_warn("PState id 0x%x outside of PState table, reporting nominal id 0x%x instead\n", pstate_id, idx_to_pstate(powernv_pstate_info.nominal)); i = powernv_pstate_info.nominal; } @@ -420,8 +468,8 @@ static inline void set_pmspr(unsigned long sprn, unsigned long val) */ struct powernv_smp_call_data { unsigned int freq; - int pstate_id; - int gpstate_id; + u8 pstate_id; + u8 gpstate_id; }; /* @@ -438,22 +486,15 @@ struct powernv_smp_call_data { static void powernv_read_cpu_freq(void *arg) { unsigned long pmspr_val; - s8 local_pstate_id; struct powernv_smp_call_data *freq_data = arg; pmspr_val = get_pmspr(SPRN_PMSR); - - /* - * The local pstate id corresponds bits 48..55 in the PMSR. - * Note: Watch out for the sign! - */ - local_pstate_id = (pmspr_val >> 48) & 0xFF; - freq_data->pstate_id = local_pstate_id; + freq_data->pstate_id = extract_local_pstate(pmspr_val); freq_data->freq = pstate_id_to_freq(freq_data->pstate_id); - pr_debug("cpu %d pmsr %016lX pstate_id %d frequency %d kHz\n", - raw_smp_processor_id(), pmspr_val, freq_data->pstate_id, - freq_data->freq); + pr_debug("cpu %d pmsr %016lX pstate_id 0x%x frequency %d kHz\n", + raw_smp_processor_id(), pmspr_val, freq_data->pstate_id, + freq_data->freq); } /* @@ -515,21 +556,21 @@ static void powernv_cpufreq_throttle_check(void *data) struct chip *chip; unsigned int cpu = smp_processor_id(); unsigned long pmsr; - int pmsr_pmax; + u8 pmsr_pmax; unsigned int pmsr_pmax_idx; pmsr = get_pmspr(SPRN_PMSR); chip = this_cpu_read(chip_info); /* Check for Pmax Capping */ - pmsr_pmax = (s8)PMSR_MAX(pmsr); + pmsr_pmax = extract_max_pstate(pmsr); pmsr_pmax_idx = pstate_to_idx(pmsr_pmax); if (pmsr_pmax_idx != powernv_pstate_info.max) { if (chip->throttled) goto next; chip->throttled = true; if (pmsr_pmax_idx > powernv_pstate_info.nominal) { - pr_warn_once("CPU %d on Chip %u has Pmax(%d) reduced below nominal frequency(%d)\n", + pr_warn_once("CPU %d on Chip %u has Pmax(0x%x) reduced below that of nominal frequency(0x%x)\n", cpu, chip->id, pmsr_pmax, idx_to_pstate(powernv_pstate_info.nominal)); chip->throttle_sub_turbo++; @@ -645,8 +686,8 @@ void gpstate_timer_handler(struct timer_list *t) * value. Hence, read from PMCR to get correct data. */ val = get_pmspr(SPRN_PMCR); - freq_data.gpstate_id = (s8)GET_GPSTATE(val); - freq_data.pstate_id = (s8)GET_LPSTATE(val); + freq_data.gpstate_id = extract_global_pstate(val); + freq_data.pstate_id = extract_local_pstate(val); if (freq_data.gpstate_id == freq_data.pstate_id) { reset_gpstates(policy); spin_unlock(&gpstates->gpstate_lock); diff --git a/drivers/cpufreq/qoriq-cpufreq.c b/drivers/cpufreq/qoriq-cpufreq.c index 4ada55b8856e..0562761a3dec 100644 --- a/drivers/cpufreq/qoriq-cpufreq.c +++ b/drivers/cpufreq/qoriq-cpufreq.c @@ -275,20 +275,8 @@ static int qoriq_cpufreq_target(struct cpufreq_policy *policy, static void qoriq_cpufreq_ready(struct cpufreq_policy *policy) { struct cpu_data *cpud = policy->driver_data; - struct device_node *np = of_get_cpu_node(policy->cpu, NULL); - if (of_find_property(np, "#cooling-cells", NULL)) { - cpud->cdev = of_cpufreq_cooling_register(np, policy); - - if (IS_ERR(cpud->cdev) && PTR_ERR(cpud->cdev) != -ENOSYS) { - pr_err("cpu%d is not running as cooling device: %ld\n", - policy->cpu, PTR_ERR(cpud->cdev)); - - cpud->cdev = NULL; - } - } - - of_node_put(np); + cpud->cdev = of_cpufreq_cooling_register(policy); } static struct cpufreq_driver qoriq_cpufreq_driver = { diff --git a/drivers/cpufreq/scpi-cpufreq.c b/drivers/cpufreq/scpi-cpufreq.c index 05d299052c5c..247fcbfa4cb5 100644 --- a/drivers/cpufreq/scpi-cpufreq.c +++ b/drivers/cpufreq/scpi-cpufreq.c @@ -18,27 +18,89 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include <linux/clk.h> #include <linux/cpu.h> #include <linux/cpufreq.h> +#include <linux/cpumask.h> +#include <linux/cpu_cooling.h> +#include <linux/export.h> #include <linux/module.h> -#include <linux/platform_device.h> +#include <linux/of_platform.h> #include <linux/pm_opp.h> #include <linux/scpi_protocol.h> +#include <linux/slab.h> #include <linux/types.h> -#include "arm_big_little.h" +struct scpi_data { + struct clk *clk; + struct device *cpu_dev; + struct thermal_cooling_device *cdev; +}; static struct scpi_ops *scpi_ops; -static int scpi_get_transition_latency(struct device *cpu_dev) +static unsigned int scpi_cpufreq_get_rate(unsigned int cpu) +{ + struct cpufreq_policy *policy = cpufreq_cpu_get_raw(cpu); + struct scpi_data *priv = policy->driver_data; + unsigned long rate = clk_get_rate(priv->clk); + + return rate / 1000; +} + +static int +scpi_cpufreq_set_target(struct cpufreq_policy *policy, unsigned int index) +{ + struct scpi_data *priv = policy->driver_data; + u64 rate = policy->freq_table[index].frequency * 1000; + int ret; + + ret = clk_set_rate(priv->clk, rate); + if (!ret && (clk_get_rate(priv->clk) != rate)) + ret = -EIO; + + return ret; +} + +static int +scpi_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask) { - return scpi_ops->get_transition_latency(cpu_dev); + int cpu, domain, tdomain; + struct device *tcpu_dev; + + domain = scpi_ops->device_domain_id(cpu_dev); + if (domain < 0) + return domain; + + for_each_possible_cpu(cpu) { + if (cpu == cpu_dev->id) + continue; + + tcpu_dev = get_cpu_device(cpu); + if (!tcpu_dev) + continue; + + tdomain = scpi_ops->device_domain_id(tcpu_dev); + if (tdomain == domain) + cpumask_set_cpu(cpu, cpumask); + } + + return 0; } -static int scpi_init_opp_table(const struct cpumask *cpumask) +static int scpi_cpufreq_init(struct cpufreq_policy *policy) { int ret; - struct device *cpu_dev = get_cpu_device(cpumask_first(cpumask)); + unsigned int latency; + struct device *cpu_dev; + struct scpi_data *priv; + struct cpufreq_frequency_table *freq_table; + + cpu_dev = get_cpu_device(policy->cpu); + if (!cpu_dev) { + pr_err("failed to get cpu%d device\n", policy->cpu); + return -ENODEV; + } ret = scpi_ops->add_opps_to_device(cpu_dev); if (ret) { @@ -46,32 +108,133 @@ static int scpi_init_opp_table(const struct cpumask *cpumask) return ret; } - ret = dev_pm_opp_set_sharing_cpus(cpu_dev, cpumask); - if (ret) + ret = scpi_get_sharing_cpus(cpu_dev, policy->cpus); + if (ret) { + dev_warn(cpu_dev, "failed to get sharing cpumask\n"); + return ret; + } + + ret = dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus); + if (ret) { dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n", __func__, ret); + return ret; + } + + ret = dev_pm_opp_get_opp_count(cpu_dev); + if (ret <= 0) { + dev_dbg(cpu_dev, "OPP table is not ready, deferring probe\n"); + ret = -EPROBE_DEFER; + goto out_free_opp; + } + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) { + ret = -ENOMEM; + goto out_free_opp; + } + + ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table); + if (ret) { + dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); + goto out_free_priv; + } + + priv->cpu_dev = cpu_dev; + priv->clk = clk_get(cpu_dev, NULL); + if (IS_ERR(priv->clk)) { + dev_err(cpu_dev, "%s: Failed to get clk for cpu: %d\n", + __func__, cpu_dev->id); + goto out_free_cpufreq_table; + } + + policy->driver_data = priv; + + ret = cpufreq_table_validate_and_show(policy, freq_table); + if (ret) { + dev_err(cpu_dev, "%s: invalid frequency table: %d\n", __func__, + ret); + goto out_put_clk; + } + + /* scpi allows DVFS request for any domain from any CPU */ + policy->dvfs_possible_from_any_cpu = true; + + latency = scpi_ops->get_transition_latency(cpu_dev); + if (!latency) + latency = CPUFREQ_ETERNAL; + + policy->cpuinfo.transition_latency = latency; + + policy->fast_switch_possible = false; + return 0; + +out_put_clk: + clk_put(priv->clk); +out_free_cpufreq_table: + dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table); +out_free_priv: + kfree(priv); +out_free_opp: + dev_pm_opp_cpumask_remove_table(policy->cpus); + return ret; } -static const struct cpufreq_arm_bL_ops scpi_cpufreq_ops = { - .name = "scpi", - .get_transition_latency = scpi_get_transition_latency, - .init_opp_table = scpi_init_opp_table, - .free_opp_table = dev_pm_opp_cpumask_remove_table, +static int scpi_cpufreq_exit(struct cpufreq_policy *policy) +{ + struct scpi_data *priv = policy->driver_data; + + cpufreq_cooling_unregister(priv->cdev); + clk_put(priv->clk); + dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table); + kfree(priv); + dev_pm_opp_cpumask_remove_table(policy->related_cpus); + + return 0; +} + +static void scpi_cpufreq_ready(struct cpufreq_policy *policy) +{ + struct scpi_data *priv = policy->driver_data; + struct thermal_cooling_device *cdev; + + cdev = of_cpufreq_cooling_register(policy); + if (!IS_ERR(cdev)) + priv->cdev = cdev; +} + +static struct cpufreq_driver scpi_cpufreq_driver = { + .name = "scpi-cpufreq", + .flags = CPUFREQ_STICKY | CPUFREQ_HAVE_GOVERNOR_PER_POLICY | + CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .attr = cpufreq_generic_attr, + .get = scpi_cpufreq_get_rate, + .init = scpi_cpufreq_init, + .exit = scpi_cpufreq_exit, + .ready = scpi_cpufreq_ready, + .target_index = scpi_cpufreq_set_target, }; static int scpi_cpufreq_probe(struct platform_device *pdev) { + int ret; + scpi_ops = get_scpi_ops(); if (!scpi_ops) return -EIO; - return bL_cpufreq_register(&scpi_cpufreq_ops); + ret = cpufreq_register_driver(&scpi_cpufreq_driver); + if (ret) + dev_err(&pdev->dev, "%s: registering cpufreq failed, err: %d\n", + __func__, ret); + return ret; } static int scpi_cpufreq_remove(struct platform_device *pdev) { - bL_cpufreq_unregister(&scpi_cpufreq_ops); + cpufreq_unregister_driver(&scpi_cpufreq_driver); scpi_ops = NULL; return 0; } diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c index 923317f03b4b..a099b7bf74cd 100644 --- a/drivers/cpufreq/ti-cpufreq.c +++ b/drivers/cpufreq/ti-cpufreq.c @@ -17,6 +17,7 @@ #include <linux/cpu.h> #include <linux/io.h> #include <linux/mfd/syscon.h> +#include <linux/module.h> #include <linux/init.h> #include <linux/of.h> #include <linux/of_platform.h> @@ -50,6 +51,7 @@ struct ti_cpufreq_soc_data { unsigned long efuse_mask; unsigned long efuse_shift; unsigned long rev_offset; + bool multi_regulator; }; struct ti_cpufreq_data { @@ -57,6 +59,7 @@ struct ti_cpufreq_data { struct device_node *opp_node; struct regmap *syscon; const struct ti_cpufreq_soc_data *soc_data; + struct opp_table *opp_table; }; static unsigned long amx3_efuse_xlate(struct ti_cpufreq_data *opp_data, @@ -95,6 +98,7 @@ static struct ti_cpufreq_soc_data am3x_soc_data = { .efuse_offset = 0x07fc, .efuse_mask = 0x1fff, .rev_offset = 0x600, + .multi_regulator = false, }; static struct ti_cpufreq_soc_data am4x_soc_data = { @@ -103,6 +107,7 @@ static struct ti_cpufreq_soc_data am4x_soc_data = { .efuse_offset = 0x0610, .efuse_mask = 0x3f, .rev_offset = 0x600, + .multi_regulator = false, }; static struct ti_cpufreq_soc_data dra7_soc_data = { @@ -111,6 +116,7 @@ static struct ti_cpufreq_soc_data dra7_soc_data = { .efuse_mask = 0xf80000, .efuse_shift = 19, .rev_offset = 0x204, + .multi_regulator = true, }; /** @@ -195,12 +201,14 @@ static const struct of_device_id ti_cpufreq_of_match[] = { {}, }; -static int ti_cpufreq_init(void) +static int ti_cpufreq_probe(struct platform_device *pdev) { u32 version[VERSION_COUNT]; struct device_node *np; const struct of_device_id *match; + struct opp_table *ti_opp_table; struct ti_cpufreq_data *opp_data; + const char * const reg_names[] = {"vdd", "vbb"}; int ret; np = of_find_node_by_path("/"); @@ -247,16 +255,29 @@ static int ti_cpufreq_init(void) if (ret) goto fail_put_node; - ret = PTR_ERR_OR_ZERO(dev_pm_opp_set_supported_hw(opp_data->cpu_dev, - version, VERSION_COUNT)); - if (ret) { + ti_opp_table = dev_pm_opp_set_supported_hw(opp_data->cpu_dev, + version, VERSION_COUNT); + if (IS_ERR(ti_opp_table)) { dev_err(opp_data->cpu_dev, "Failed to set supported hardware\n"); + ret = PTR_ERR(ti_opp_table); goto fail_put_node; } - of_node_put(opp_data->opp_node); + opp_data->opp_table = ti_opp_table; + + if (opp_data->soc_data->multi_regulator) { + ti_opp_table = dev_pm_opp_set_regulators(opp_data->cpu_dev, + reg_names, + ARRAY_SIZE(reg_names)); + if (IS_ERR(ti_opp_table)) { + dev_pm_opp_put_supported_hw(opp_data->opp_table); + ret = PTR_ERR(ti_opp_table); + goto fail_put_node; + } + } + of_node_put(opp_data->opp_node); register_cpufreq_dt: platform_device_register_simple("cpufreq-dt", -1, NULL, 0); @@ -269,4 +290,22 @@ free_opp_data: return ret; } -device_initcall(ti_cpufreq_init); + +static int ti_cpufreq_init(void) +{ + platform_device_register_simple("ti-cpufreq", -1, NULL, 0); + return 0; +} +module_init(ti_cpufreq_init); + +static struct platform_driver ti_cpufreq_driver = { + .probe = ti_cpufreq_probe, + .driver = { + .name = "ti-cpufreq", + }, +}; +module_platform_driver(ti_cpufreq_driver); + +MODULE_DESCRIPTION("TI CPUFreq/OPP hw-supported driver"); +MODULE_AUTHOR("Dave Gerlach <d-gerlach@ti.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/firmware/psci_checker.c b/drivers/firmware/psci_checker.c index f3f4f810e5df..bb1c068bff19 100644 --- a/drivers/firmware/psci_checker.c +++ b/drivers/firmware/psci_checker.c @@ -77,8 +77,8 @@ static int psci_ops_check(void) return 0; } -static int find_clusters(const struct cpumask *cpus, - const struct cpumask **clusters) +static int find_cpu_groups(const struct cpumask *cpus, + const struct cpumask **cpu_groups) { unsigned int nb = 0; cpumask_var_t tmp; @@ -88,11 +88,11 @@ static int find_clusters(const struct cpumask *cpus, cpumask_copy(tmp, cpus); while (!cpumask_empty(tmp)) { - const struct cpumask *cluster = + const struct cpumask *cpu_group = topology_core_cpumask(cpumask_any(tmp)); - clusters[nb++] = cluster; - cpumask_andnot(tmp, tmp, cluster); + cpu_groups[nb++] = cpu_group; + cpumask_andnot(tmp, tmp, cpu_group); } free_cpumask_var(tmp); @@ -170,24 +170,24 @@ static int hotplug_tests(void) { int err; cpumask_var_t offlined_cpus; - int i, nb_cluster; - const struct cpumask **clusters; + int i, nb_cpu_group; + const struct cpumask **cpu_groups; char *page_buf; err = -ENOMEM; if (!alloc_cpumask_var(&offlined_cpus, GFP_KERNEL)) return err; - /* We may have up to nb_available_cpus clusters. */ - clusters = kmalloc_array(nb_available_cpus, sizeof(*clusters), - GFP_KERNEL); - if (!clusters) + /* We may have up to nb_available_cpus cpu_groups. */ + cpu_groups = kmalloc_array(nb_available_cpus, sizeof(*cpu_groups), + GFP_KERNEL); + if (!cpu_groups) goto out_free_cpus; page_buf = (char *)__get_free_page(GFP_KERNEL); if (!page_buf) - goto out_free_clusters; + goto out_free_cpu_groups; err = 0; - nb_cluster = find_clusters(cpu_online_mask, clusters); + nb_cpu_group = find_cpu_groups(cpu_online_mask, cpu_groups); /* * Of course the last CPU cannot be powered down and cpu_down() should @@ -197,24 +197,22 @@ static int hotplug_tests(void) err += down_and_up_cpus(cpu_online_mask, offlined_cpus); /* - * Take down CPUs by cluster this time. When the last CPU is turned - * off, the cluster itself should shut down. + * Take down CPUs by cpu group this time. When the last CPU is turned + * off, the cpu group itself should shut down. */ - for (i = 0; i < nb_cluster; ++i) { - int cluster_id = - topology_physical_package_id(cpumask_any(clusters[i])); + for (i = 0; i < nb_cpu_group; ++i) { ssize_t len = cpumap_print_to_pagebuf(true, page_buf, - clusters[i]); + cpu_groups[i]); /* Remove trailing newline. */ page_buf[len - 1] = '\0'; - pr_info("Trying to turn off and on again cluster %d " - "(CPUs %s)\n", cluster_id, page_buf); - err += down_and_up_cpus(clusters[i], offlined_cpus); + pr_info("Trying to turn off and on again group %d (CPUs %s)\n", + i, page_buf); + err += down_and_up_cpus(cpu_groups[i], offlined_cpus); } free_page((unsigned long)page_buf); -out_free_clusters: - kfree(clusters); +out_free_cpu_groups: + kfree(cpu_groups); out_free_cpus: free_cpumask_var(offlined_cpus); return err; diff --git a/drivers/opp/Makefile b/drivers/opp/Makefile index e70ceb406fe9..6ce6aefacc81 100644 --- a/drivers/opp/Makefile +++ b/drivers/opp/Makefile @@ -2,3 +2,4 @@ ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG obj-y += core.o cpu.o obj-$(CONFIG_OF) += of.o obj-$(CONFIG_DEBUG_FS) += debugfs.o +obj-$(CONFIG_ARM_TI_CPUFREQ) += ti-opp-supply.o diff --git a/drivers/opp/ti-opp-supply.c b/drivers/opp/ti-opp-supply.c new file mode 100644 index 000000000000..370eff3acd8a --- /dev/null +++ b/drivers/opp/ti-opp-supply.c @@ -0,0 +1,425 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016-2017 Texas Instruments Incorporated - http://www.ti.com/ + * Nishanth Menon <nm@ti.com> + * Dave Gerlach <d-gerlach@ti.com> + * + * TI OPP supply driver that provides override into the regulator control + * for generic opp core to handle devices with ABB regulator and/or + * SmartReflex Class0. + */ +#include <linux/clk.h> +#include <linux/cpufreq.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/notifier.h> +#include <linux/of_device.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pm_opp.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> + +/** + * struct ti_opp_supply_optimum_voltage_table - optimized voltage table + * @reference_uv: reference voltage (usually Nominal voltage) + * @optimized_uv: Optimized voltage from efuse + */ +struct ti_opp_supply_optimum_voltage_table { + unsigned int reference_uv; + unsigned int optimized_uv; +}; + +/** + * struct ti_opp_supply_data - OMAP specific opp supply data + * @vdd_table: Optimized voltage mapping table + * @num_vdd_table: number of entries in vdd_table + * @vdd_absolute_max_voltage_uv: absolute maximum voltage in UV for the supply + */ +struct ti_opp_supply_data { + struct ti_opp_supply_optimum_voltage_table *vdd_table; + u32 num_vdd_table; + u32 vdd_absolute_max_voltage_uv; +}; + +static struct ti_opp_supply_data opp_data; + +/** + * struct ti_opp_supply_of_data - device tree match data + * @flags: specific type of opp supply + * @efuse_voltage_mask: mask required for efuse register representing voltage + * @efuse_voltage_uv: Are the efuse entries in micro-volts? if not, assume + * milli-volts. + */ +struct ti_opp_supply_of_data { +#define OPPDM_EFUSE_CLASS0_OPTIMIZED_VOLTAGE BIT(1) +#define OPPDM_HAS_NO_ABB BIT(2) + const u8 flags; + const u32 efuse_voltage_mask; + const bool efuse_voltage_uv; +}; + +/** + * _store_optimized_voltages() - store optimized voltages + * @dev: ti opp supply device for which we need to store info + * @data: data specific to the device + * + * Picks up efuse based optimized voltages for VDD unique per device and + * stores it in internal data structure for use during transition requests. + * + * Return: If successful, 0, else appropriate error value. + */ +static int _store_optimized_voltages(struct device *dev, + struct ti_opp_supply_data *data) +{ + void __iomem *base; + struct property *prop; + struct resource *res; + const __be32 *val; + int proplen, i; + int ret = 0; + struct ti_opp_supply_optimum_voltage_table *table; + const struct ti_opp_supply_of_data *of_data = dev_get_drvdata(dev); + + /* pick up Efuse based voltages */ + res = platform_get_resource(to_platform_device(dev), IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "Unable to get IO resource\n"); + ret = -ENODEV; + goto out_map; + } + + base = ioremap_nocache(res->start, resource_size(res)); + if (!base) { + dev_err(dev, "Unable to map Efuse registers\n"); + ret = -ENOMEM; + goto out_map; + } + + /* Fetch efuse-settings. */ + prop = of_find_property(dev->of_node, "ti,efuse-settings", NULL); + if (!prop) { + dev_err(dev, "No 'ti,efuse-settings' property found\n"); + ret = -EINVAL; + goto out; + } + + proplen = prop->length / sizeof(int); + data->num_vdd_table = proplen / 2; + /* Verify for corrupted OPP entries in dt */ + if (data->num_vdd_table * 2 * sizeof(int) != prop->length) { + dev_err(dev, "Invalid 'ti,efuse-settings'\n"); + ret = -EINVAL; + goto out; + } + + ret = of_property_read_u32(dev->of_node, "ti,absolute-max-voltage-uv", + &data->vdd_absolute_max_voltage_uv); + if (ret) { + dev_err(dev, "ti,absolute-max-voltage-uv is missing\n"); + ret = -EINVAL; + goto out; + } + + table = kzalloc(sizeof(*data->vdd_table) * + data->num_vdd_table, GFP_KERNEL); + if (!table) { + ret = -ENOMEM; + goto out; + } + data->vdd_table = table; + + val = prop->value; + for (i = 0; i < data->num_vdd_table; i++, table++) { + u32 efuse_offset; + u32 tmp; + + table->reference_uv = be32_to_cpup(val++); + efuse_offset = be32_to_cpup(val++); + + tmp = readl(base + efuse_offset); + tmp &= of_data->efuse_voltage_mask; + tmp >>= __ffs(of_data->efuse_voltage_mask); + + table->optimized_uv = of_data->efuse_voltage_uv ? tmp : + tmp * 1000; + + dev_dbg(dev, "[%d] efuse=0x%08x volt_table=%d vset=%d\n", + i, efuse_offset, table->reference_uv, + table->optimized_uv); + + /* + * Some older samples might not have optimized efuse + * Use reference voltage for those - just add debug message + * for them. + */ + if (!table->optimized_uv) { + dev_dbg(dev, "[%d] efuse=0x%08x volt_table=%d:vset0\n", + i, efuse_offset, table->reference_uv); + table->optimized_uv = table->reference_uv; + } + } +out: + iounmap(base); +out_map: + return ret; +} + +/** + * _free_optimized_voltages() - free resources for optvoltages + * @dev: device for which we need to free info + * @data: data specific to the device + */ +static void _free_optimized_voltages(struct device *dev, + struct ti_opp_supply_data *data) +{ + kfree(data->vdd_table); + data->vdd_table = NULL; + data->num_vdd_table = 0; +} + +/** + * _get_optimal_vdd_voltage() - Finds optimal voltage for the supply + * @dev: device for which we need to find info + * @data: data specific to the device + * @reference_uv: reference voltage (OPP voltage) for which we need value + * + * Return: if a match is found, return optimized voltage, else return + * reference_uv, also return reference_uv if no optimization is needed. + */ +static int _get_optimal_vdd_voltage(struct device *dev, + struct ti_opp_supply_data *data, + int reference_uv) +{ + int i; + struct ti_opp_supply_optimum_voltage_table *table; + + if (!data->num_vdd_table) + return reference_uv; + + table = data->vdd_table; + if (!table) + return -EINVAL; + + /* Find a exact match - this list is usually very small */ + for (i = 0; i < data->num_vdd_table; i++, table++) + if (table->reference_uv == reference_uv) + return table->optimized_uv; + + /* IF things are screwed up, we'd make a mess on console.. ratelimit */ + dev_err_ratelimited(dev, "%s: Failed optimized voltage match for %d\n", + __func__, reference_uv); + return reference_uv; +} + +static int _opp_set_voltage(struct device *dev, + struct dev_pm_opp_supply *supply, + int new_target_uv, struct regulator *reg, + char *reg_name) +{ + int ret; + unsigned long vdd_uv, uv_max; + + if (new_target_uv) + vdd_uv = new_target_uv; + else + vdd_uv = supply->u_volt; + + /* + * If we do have an absolute max voltage specified, then we should + * use that voltage instead to allow for cases where the voltage rails + * are ganged (example if we set the max for an opp as 1.12v, and + * the absolute max is 1.5v, for another rail to get 1.25v, it cannot + * be achieved if the regulator is constrainted to max of 1.12v, even + * if it can function at 1.25v + */ + if (opp_data.vdd_absolute_max_voltage_uv) + uv_max = opp_data.vdd_absolute_max_voltage_uv; + else + uv_max = supply->u_volt_max; + + if (vdd_uv > uv_max || + vdd_uv < supply->u_volt_min || + supply->u_volt_min > uv_max) { + dev_warn(dev, + "Invalid range voltages [Min:%lu target:%lu Max:%lu]\n", + supply->u_volt_min, vdd_uv, uv_max); + return -EINVAL; + } + + dev_dbg(dev, "%s scaling to %luuV[min %luuV max %luuV]\n", reg_name, + vdd_uv, supply->u_volt_min, + uv_max); + + ret = regulator_set_voltage_triplet(reg, + supply->u_volt_min, + vdd_uv, + uv_max); + if (ret) { + dev_err(dev, "%s failed for %luuV[min %luuV max %luuV]\n", + reg_name, vdd_uv, supply->u_volt_min, + uv_max); + return ret; + } + + return 0; +} + +/** + * ti_opp_supply_set_opp() - do the opp supply transition + * @data: information on regulators and new and old opps provided by + * opp core to use in transition + * + * Return: If successful, 0, else appropriate error value. + */ +static int ti_opp_supply_set_opp(struct dev_pm_set_opp_data *data) +{ + struct dev_pm_opp_supply *old_supply_vdd = &data->old_opp.supplies[0]; + struct dev_pm_opp_supply *old_supply_vbb = &data->old_opp.supplies[1]; + struct dev_pm_opp_supply *new_supply_vdd = &data->new_opp.supplies[0]; + struct dev_pm_opp_supply *new_supply_vbb = &data->new_opp.supplies[1]; + struct device *dev = data->dev; + unsigned long old_freq = data->old_opp.rate, freq = data->new_opp.rate; + struct clk *clk = data->clk; + struct regulator *vdd_reg = data->regulators[0]; + struct regulator *vbb_reg = data->regulators[1]; + int vdd_uv; + int ret; + + vdd_uv = _get_optimal_vdd_voltage(dev, &opp_data, + new_supply_vbb->u_volt); + + /* Scaling up? Scale voltage before frequency */ + if (freq > old_freq) { + ret = _opp_set_voltage(dev, new_supply_vdd, vdd_uv, vdd_reg, + "vdd"); + if (ret) + goto restore_voltage; + + ret = _opp_set_voltage(dev, new_supply_vbb, 0, vbb_reg, "vbb"); + if (ret) + goto restore_voltage; + } + + /* Change frequency */ + dev_dbg(dev, "%s: switching OPP: %lu Hz --> %lu Hz\n", + __func__, old_freq, freq); + + ret = clk_set_rate(clk, freq); + if (ret) { + dev_err(dev, "%s: failed to set clock rate: %d\n", __func__, + ret); + goto restore_voltage; + } + + /* Scaling down? Scale voltage after frequency */ + if (freq < old_freq) { + ret = _opp_set_voltage(dev, new_supply_vbb, 0, vbb_reg, "vbb"); + if (ret) + goto restore_freq; + + ret = _opp_set_voltage(dev, new_supply_vdd, vdd_uv, vdd_reg, + "vdd"); + if (ret) + goto restore_freq; + } + + return 0; + +restore_freq: + ret = clk_set_rate(clk, old_freq); + if (ret) + dev_err(dev, "%s: failed to restore old-freq (%lu Hz)\n", + __func__, old_freq); +restore_voltage: + /* This shouldn't harm even if the voltages weren't updated earlier */ + if (old_supply_vdd->u_volt) { + ret = _opp_set_voltage(dev, old_supply_vbb, 0, vbb_reg, "vbb"); + if (ret) + return ret; + + ret = _opp_set_voltage(dev, old_supply_vdd, 0, vdd_reg, + "vdd"); + if (ret) + return ret; + } + + return ret; +} + +static const struct ti_opp_supply_of_data omap_generic_of_data = { +}; + +static const struct ti_opp_supply_of_data omap_omap5_of_data = { + .flags = OPPDM_EFUSE_CLASS0_OPTIMIZED_VOLTAGE, + .efuse_voltage_mask = 0xFFF, + .efuse_voltage_uv = false, +}; + +static const struct ti_opp_supply_of_data omap_omap5core_of_data = { + .flags = OPPDM_EFUSE_CLASS0_OPTIMIZED_VOLTAGE | OPPDM_HAS_NO_ABB, + .efuse_voltage_mask = 0xFFF, + .efuse_voltage_uv = false, +}; + +static const struct of_device_id ti_opp_supply_of_match[] = { + {.compatible = "ti,omap-opp-supply", .data = &omap_generic_of_data}, + {.compatible = "ti,omap5-opp-supply", .data = &omap_omap5_of_data}, + {.compatible = "ti,omap5-core-opp-supply", + .data = &omap_omap5core_of_data}, + {}, +}; +MODULE_DEVICE_TABLE(of, ti_opp_supply_of_match); + +static int ti_opp_supply_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device *cpu_dev = get_cpu_device(0); + const struct of_device_id *match; + const struct ti_opp_supply_of_data *of_data; + int ret = 0; + + match = of_match_device(ti_opp_supply_of_match, dev); + if (!match) { + /* We do not expect this to happen */ + dev_err(dev, "%s: Unable to match device\n", __func__); + return -ENODEV; + } + if (!match->data) { + /* Again, unlikely.. but mistakes do happen */ + dev_err(dev, "%s: Bad data in match\n", __func__); + return -EINVAL; + } + of_data = match->data; + + dev_set_drvdata(dev, (void *)of_data); + + /* If we need optimized voltage */ + if (of_data->flags & OPPDM_EFUSE_CLASS0_OPTIMIZED_VOLTAGE) { + ret = _store_optimized_voltages(dev, &opp_data); + if (ret) + return ret; + } + + ret = PTR_ERR_OR_ZERO(dev_pm_opp_register_set_opp_helper(cpu_dev, + ti_opp_supply_set_opp)); + if (ret) + _free_optimized_voltages(dev, &opp_data); + + return ret; +} + +static struct platform_driver ti_opp_supply_driver = { + .probe = ti_opp_supply_probe, + .driver = { + .name = "ti_opp_supply", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(ti_opp_supply_of_match), + }, +}; +module_platform_driver(ti_opp_supply_driver); + +MODULE_DESCRIPTION("Texas Instruments OMAP OPP Supply driver"); +MODULE_AUTHOR("Texas Instruments Inc."); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index dc63aba092e4..dfd23245f778 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -88,7 +88,6 @@ struct time_in_idle { * @policy: cpufreq policy. * @node: list_head to link all cpufreq_cooling_device together. * @idle_time: idle time stats - * @plat_get_static_power: callback to calculate the static power * * This structure is required for keeping information of each registered * cpufreq_cooling_device. @@ -104,7 +103,6 @@ struct cpufreq_cooling_device { struct cpufreq_policy *policy; struct list_head node; struct time_in_idle *idle_time; - get_static_t plat_get_static_power; }; static DEFINE_IDA(cpufreq_ida); @@ -319,60 +317,6 @@ static u32 get_load(struct cpufreq_cooling_device *cpufreq_cdev, int cpu, } /** - * get_static_power() - calculate the static power consumed by the cpus - * @cpufreq_cdev: struct &cpufreq_cooling_device for this cpu cdev - * @tz: thermal zone device in which we're operating - * @freq: frequency in KHz - * @power: pointer in which to store the calculated static power - * - * Calculate the static power consumed by the cpus described by - * @cpu_actor running at frequency @freq. This function relies on a - * platform specific function that should have been provided when the - * actor was registered. If it wasn't, the static power is assumed to - * be negligible. The calculated static power is stored in @power. - * - * Return: 0 on success, -E* on failure. - */ -static int get_static_power(struct cpufreq_cooling_device *cpufreq_cdev, - struct thermal_zone_device *tz, unsigned long freq, - u32 *power) -{ - struct dev_pm_opp *opp; - unsigned long voltage; - struct cpufreq_policy *policy = cpufreq_cdev->policy; - struct cpumask *cpumask = policy->related_cpus; - unsigned long freq_hz = freq * 1000; - struct device *dev; - - if (!cpufreq_cdev->plat_get_static_power) { - *power = 0; - return 0; - } - - dev = get_cpu_device(policy->cpu); - WARN_ON(!dev); - - opp = dev_pm_opp_find_freq_exact(dev, freq_hz, true); - if (IS_ERR(opp)) { - dev_warn_ratelimited(dev, "Failed to find OPP for frequency %lu: %ld\n", - freq_hz, PTR_ERR(opp)); - return -EINVAL; - } - - voltage = dev_pm_opp_get_voltage(opp); - dev_pm_opp_put(opp); - - if (voltage == 0) { - dev_err_ratelimited(dev, "Failed to get voltage for frequency %lu\n", - freq_hz); - return -EINVAL; - } - - return cpufreq_cdev->plat_get_static_power(cpumask, tz->passive_delay, - voltage, power); -} - -/** * get_dynamic_power() - calculate the dynamic power * @cpufreq_cdev: &cpufreq_cooling_device for this cdev * @freq: current frequency @@ -491,8 +435,8 @@ static int cpufreq_get_requested_power(struct thermal_cooling_device *cdev, u32 *power) { unsigned long freq; - int i = 0, cpu, ret; - u32 static_power, dynamic_power, total_load = 0; + int i = 0, cpu; + u32 total_load = 0; struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata; struct cpufreq_policy *policy = cpufreq_cdev->policy; u32 *load_cpu = NULL; @@ -522,22 +466,15 @@ static int cpufreq_get_requested_power(struct thermal_cooling_device *cdev, cpufreq_cdev->last_load = total_load; - dynamic_power = get_dynamic_power(cpufreq_cdev, freq); - ret = get_static_power(cpufreq_cdev, tz, freq, &static_power); - if (ret) { - kfree(load_cpu); - return ret; - } + *power = get_dynamic_power(cpufreq_cdev, freq); if (load_cpu) { trace_thermal_power_cpu_get_power(policy->related_cpus, freq, - load_cpu, i, dynamic_power, - static_power); + load_cpu, i, *power); kfree(load_cpu); } - *power = static_power + dynamic_power; return 0; } @@ -561,8 +498,6 @@ static int cpufreq_state2power(struct thermal_cooling_device *cdev, unsigned long state, u32 *power) { unsigned int freq, num_cpus; - u32 static_power, dynamic_power; - int ret; struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata; /* Request state should be less than max_level */ @@ -572,13 +507,9 @@ static int cpufreq_state2power(struct thermal_cooling_device *cdev, num_cpus = cpumask_weight(cpufreq_cdev->policy->cpus); freq = cpufreq_cdev->freq_table[state].frequency; - dynamic_power = cpu_freq_to_power(cpufreq_cdev, freq) * num_cpus; - ret = get_static_power(cpufreq_cdev, tz, freq, &static_power); - if (ret) - return ret; + *power = cpu_freq_to_power(cpufreq_cdev, freq) * num_cpus; - *power = static_power + dynamic_power; - return ret; + return 0; } /** @@ -606,21 +537,14 @@ static int cpufreq_power2state(struct thermal_cooling_device *cdev, unsigned long *state) { unsigned int cur_freq, target_freq; - int ret; - s32 dyn_power; - u32 last_load, normalised_power, static_power; + u32 last_load, normalised_power; struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata; struct cpufreq_policy *policy = cpufreq_cdev->policy; cur_freq = cpufreq_quick_get(policy->cpu); - ret = get_static_power(cpufreq_cdev, tz, cur_freq, &static_power); - if (ret) - return ret; - - dyn_power = power - static_power; - dyn_power = dyn_power > 0 ? dyn_power : 0; + power = power > 0 ? power : 0; last_load = cpufreq_cdev->last_load ?: 1; - normalised_power = (dyn_power * 100) / last_load; + normalised_power = (power * 100) / last_load; target_freq = cpu_power_to_freq(cpufreq_cdev, normalised_power); *state = get_level(cpufreq_cdev, target_freq); @@ -671,8 +595,6 @@ static unsigned int find_next_max(struct cpufreq_frequency_table *table, * @policy: cpufreq policy * Normally this should be same as cpufreq policy->related_cpus. * @capacitance: dynamic power coefficient for these cpus - * @plat_static_func: function to calculate the static power consumed by these - * cpus (optional) * * This interface function registers the cpufreq cooling device with the name * "thermal-cpufreq-%x". This api can support multiple instances of cpufreq @@ -684,8 +606,7 @@ static unsigned int find_next_max(struct cpufreq_frequency_table *table, */ static struct thermal_cooling_device * __cpufreq_cooling_register(struct device_node *np, - struct cpufreq_policy *policy, u32 capacitance, - get_static_t plat_static_func) + struct cpufreq_policy *policy, u32 capacitance) { struct thermal_cooling_device *cdev; struct cpufreq_cooling_device *cpufreq_cdev; @@ -755,8 +676,6 @@ __cpufreq_cooling_register(struct device_node *np, } if (capacitance) { - cpufreq_cdev->plat_get_static_power = plat_static_func; - ret = update_freq_table(cpufreq_cdev, capacitance); if (ret) { cdev = ERR_PTR(ret); @@ -813,13 +732,12 @@ free_cdev: struct thermal_cooling_device * cpufreq_cooling_register(struct cpufreq_policy *policy) { - return __cpufreq_cooling_register(NULL, policy, 0, NULL); + return __cpufreq_cooling_register(NULL, policy, 0); } EXPORT_SYMBOL_GPL(cpufreq_cooling_register); /** * of_cpufreq_cooling_register - function to create cpufreq cooling device. - * @np: a valid struct device_node to the cooling device device tree node * @policy: cpufreq policy * * This interface function registers the cpufreq cooling device with the name @@ -827,86 +745,45 @@ EXPORT_SYMBOL_GPL(cpufreq_cooling_register); * cooling devices. Using this API, the cpufreq cooling device will be * linked to the device tree node provided. * - * Return: a valid struct thermal_cooling_device pointer on success, - * on failure, it returns a corresponding ERR_PTR(). - */ -struct thermal_cooling_device * -of_cpufreq_cooling_register(struct device_node *np, - struct cpufreq_policy *policy) -{ - if (!np) - return ERR_PTR(-EINVAL); - - return __cpufreq_cooling_register(np, policy, 0, NULL); -} -EXPORT_SYMBOL_GPL(of_cpufreq_cooling_register); - -/** - * cpufreq_power_cooling_register() - create cpufreq cooling device with power extensions - * @policy: cpufreq policy - * @capacitance: dynamic power coefficient for these cpus - * @plat_static_func: function to calculate the static power consumed by these - * cpus (optional) - * - * This interface function registers the cpufreq cooling device with - * the name "thermal-cpufreq-%x". This api can support multiple - * instances of cpufreq cooling devices. Using this function, the - * cooling device will implement the power extensions by using a - * simple cpu power model. The cpus must have registered their OPPs - * using the OPP library. - * - * An optional @plat_static_func may be provided to calculate the - * static power consumed by these cpus. If the platform's static - * power consumption is unknown or negligible, make it NULL. - * - * Return: a valid struct thermal_cooling_device pointer on success, - * on failure, it returns a corresponding ERR_PTR(). - */ -struct thermal_cooling_device * -cpufreq_power_cooling_register(struct cpufreq_policy *policy, u32 capacitance, - get_static_t plat_static_func) -{ - return __cpufreq_cooling_register(NULL, policy, capacitance, - plat_static_func); -} -EXPORT_SYMBOL(cpufreq_power_cooling_register); - -/** - * of_cpufreq_power_cooling_register() - create cpufreq cooling device with power extensions - * @np: a valid struct device_node to the cooling device device tree node - * @policy: cpufreq policy - * @capacitance: dynamic power coefficient for these cpus - * @plat_static_func: function to calculate the static power consumed by these - * cpus (optional) - * - * This interface function registers the cpufreq cooling device with - * the name "thermal-cpufreq-%x". This api can support multiple - * instances of cpufreq cooling devices. Using this API, the cpufreq - * cooling device will be linked to the device tree node provided. * Using this function, the cooling device will implement the power * extensions by using a simple cpu power model. The cpus must have * registered their OPPs using the OPP library. * - * An optional @plat_static_func may be provided to calculate the - * static power consumed by these cpus. If the platform's static - * power consumption is unknown or negligible, make it NULL. + * It also takes into account, if property present in policy CPU node, the + * static power consumed by the cpu. * * Return: a valid struct thermal_cooling_device pointer on success, - * on failure, it returns a corresponding ERR_PTR(). + * and NULL on failure. */ struct thermal_cooling_device * -of_cpufreq_power_cooling_register(struct device_node *np, - struct cpufreq_policy *policy, - u32 capacitance, - get_static_t plat_static_func) +of_cpufreq_cooling_register(struct cpufreq_policy *policy) { - if (!np) - return ERR_PTR(-EINVAL); + struct device_node *np = of_get_cpu_node(policy->cpu, NULL); + struct thermal_cooling_device *cdev = NULL; + u32 capacitance = 0; + + if (!np) { + pr_err("cpu_cooling: OF node not available for cpu%d\n", + policy->cpu); + return NULL; + } + + if (of_find_property(np, "#cooling-cells", NULL)) { + of_property_read_u32(np, "dynamic-power-coefficient", + &capacitance); - return __cpufreq_cooling_register(np, policy, capacitance, - plat_static_func); + cdev = __cpufreq_cooling_register(np, policy, capacitance); + if (IS_ERR(cdev)) { + pr_err("cpu_cooling: cpu%d is not running as cooling device: %ld\n", + policy->cpu, PTR_ERR(cdev)); + cdev = NULL; + } + } + + of_node_put(np); + return cdev; } -EXPORT_SYMBOL(of_cpufreq_power_cooling_register); +EXPORT_SYMBOL_GPL(of_cpufreq_cooling_register); /** * cpufreq_cooling_unregister - function to remove cpufreq cooling device. diff --git a/include/linux/cpu_cooling.h b/include/linux/cpu_cooling.h index d4292ebc5c8b..de0dafb9399d 100644 --- a/include/linux/cpu_cooling.h +++ b/include/linux/cpu_cooling.h @@ -30,9 +30,6 @@ struct cpufreq_policy; -typedef int (*get_static_t)(cpumask_t *cpumask, int interval, - unsigned long voltage, u32 *power); - #ifdef CONFIG_CPU_THERMAL /** * cpufreq_cooling_register - function to create cpufreq cooling device. @@ -41,43 +38,6 @@ typedef int (*get_static_t)(cpumask_t *cpumask, int interval, struct thermal_cooling_device * cpufreq_cooling_register(struct cpufreq_policy *policy); -struct thermal_cooling_device * -cpufreq_power_cooling_register(struct cpufreq_policy *policy, - u32 capacitance, get_static_t plat_static_func); - -/** - * of_cpufreq_cooling_register - create cpufreq cooling device based on DT. - * @np: a valid struct device_node to the cooling device device tree node. - * @policy: cpufreq policy. - */ -#ifdef CONFIG_THERMAL_OF -struct thermal_cooling_device * -of_cpufreq_cooling_register(struct device_node *np, - struct cpufreq_policy *policy); - -struct thermal_cooling_device * -of_cpufreq_power_cooling_register(struct device_node *np, - struct cpufreq_policy *policy, - u32 capacitance, - get_static_t plat_static_func); -#else -static inline struct thermal_cooling_device * -of_cpufreq_cooling_register(struct device_node *np, - struct cpufreq_policy *policy) -{ - return ERR_PTR(-ENOSYS); -} - -static inline struct thermal_cooling_device * -of_cpufreq_power_cooling_register(struct device_node *np, - struct cpufreq_policy *policy, - u32 capacitance, - get_static_t plat_static_func) -{ - return NULL; -} -#endif - /** * cpufreq_cooling_unregister - function to remove cpufreq cooling device. * @cdev: thermal cooling device pointer. @@ -90,34 +50,27 @@ cpufreq_cooling_register(struct cpufreq_policy *policy) { return ERR_PTR(-ENOSYS); } -static inline struct thermal_cooling_device * -cpufreq_power_cooling_register(struct cpufreq_policy *policy, - u32 capacitance, get_static_t plat_static_func) -{ - return NULL; -} -static inline struct thermal_cooling_device * -of_cpufreq_cooling_register(struct device_node *np, - struct cpufreq_policy *policy) +static inline +void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) { - return ERR_PTR(-ENOSYS); + return; } +#endif /* CONFIG_CPU_THERMAL */ +#if defined(CONFIG_THERMAL_OF) && defined(CONFIG_CPU_THERMAL) +/** + * of_cpufreq_cooling_register - create cpufreq cooling device based on DT. + * @policy: cpufreq policy. + */ +struct thermal_cooling_device * +of_cpufreq_cooling_register(struct cpufreq_policy *policy); +#else static inline struct thermal_cooling_device * -of_cpufreq_power_cooling_register(struct device_node *np, - struct cpufreq_policy *policy, - u32 capacitance, - get_static_t plat_static_func) +of_cpufreq_cooling_register(struct cpufreq_policy *policy) { return NULL; } - -static inline -void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) -{ - return; -} -#endif /* CONFIG_CPU_THERMAL */ +#endif /* defined(CONFIG_THERMAL_OF) && defined(CONFIG_CPU_THERMAL) */ #endif /* __CPU_COOLING_H__ */ diff --git a/include/trace/events/thermal.h b/include/trace/events/thermal.h index 78946640fe03..135e5421f003 100644 --- a/include/trace/events/thermal.h +++ b/include/trace/events/thermal.h @@ -94,9 +94,9 @@ TRACE_EVENT(thermal_zone_trip, #ifdef CONFIG_CPU_THERMAL TRACE_EVENT(thermal_power_cpu_get_power, TP_PROTO(const struct cpumask *cpus, unsigned long freq, u32 *load, - size_t load_len, u32 dynamic_power, u32 static_power), + size_t load_len, u32 dynamic_power), - TP_ARGS(cpus, freq, load, load_len, dynamic_power, static_power), + TP_ARGS(cpus, freq, load, load_len, dynamic_power), TP_STRUCT__entry( __bitmask(cpumask, num_possible_cpus()) @@ -104,7 +104,6 @@ TRACE_EVENT(thermal_power_cpu_get_power, __dynamic_array(u32, load, load_len) __field(size_t, load_len ) __field(u32, dynamic_power ) - __field(u32, static_power ) ), TP_fast_assign( @@ -115,13 +114,12 @@ TRACE_EVENT(thermal_power_cpu_get_power, load_len * sizeof(*load)); __entry->load_len = load_len; __entry->dynamic_power = dynamic_power; - __entry->static_power = static_power; ), - TP_printk("cpus=%s freq=%lu load={%s} dynamic_power=%d static_power=%d", + TP_printk("cpus=%s freq=%lu load={%s} dynamic_power=%d", __get_bitmask(cpumask), __entry->freq, __print_array(__get_dynamic_array(load), __entry->load_len, 4), - __entry->dynamic_power, __entry->static_power) + __entry->dynamic_power) ); TRACE_EVENT(thermal_power_cpu_limit, |