summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/md/raid5.c172
-rw-r--r--include/linux/raid/raid5.h46
2 files changed, 123 insertions, 95 deletions
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 6f3dd12dd3a4..544e1600f208 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -605,7 +605,11 @@ static void ops_complete_compute5(void *stripe_head_ref)
set_bit(R5_UPTODATE, &tgt->flags);
BUG_ON(!test_bit(R5_Wantcompute, &tgt->flags));
clear_bit(R5_Wantcompute, &tgt->flags);
- set_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete);
+ clear_bit(STRIPE_COMPUTE_RUN, &sh->state);
+ if (sh->check_state == check_state_compute_run)
+ sh->check_state = check_state_compute_result;
+ else
+ set_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete);
set_bit(STRIPE_HANDLE, &sh->state);
release_stripe(sh);
}
@@ -838,7 +842,7 @@ static void ops_complete_check(void *stripe_head_ref)
pr_debug("%s: stripe %llu\n", __func__,
(unsigned long long)sh->sector);
- set_bit(STRIPE_OP_CHECK, &sh->ops.complete);
+ sh->check_state = check_state_check_result;
set_bit(STRIPE_HANDLE, &sh->state);
release_stripe(sh);
}
@@ -870,7 +874,8 @@ static void ops_run_check(struct stripe_head *sh)
ops_complete_check, sh);
}
-static void raid5_run_ops(struct stripe_head *sh, unsigned long pending)
+static void raid5_run_ops(struct stripe_head *sh, unsigned long pending,
+ unsigned long ops_request)
{
int overlap_clear = 0, i, disks = sh->disks;
struct dma_async_tx_descriptor *tx = NULL;
@@ -880,7 +885,8 @@ static void raid5_run_ops(struct stripe_head *sh, unsigned long pending)
overlap_clear++;
}
- if (test_bit(STRIPE_OP_COMPUTE_BLK, &pending))
+ if (test_bit(STRIPE_OP_COMPUTE_BLK, &pending) ||
+ test_bit(STRIPE_OP_COMPUTE_BLK, &ops_request))
tx = ops_run_compute5(sh, pending);
if (test_bit(STRIPE_OP_PREXOR, &pending))
@@ -894,7 +900,7 @@ static void raid5_run_ops(struct stripe_head *sh, unsigned long pending)
if (test_bit(STRIPE_OP_POSTXOR, &pending))
ops_run_postxor(sh, tx, pending);
- if (test_bit(STRIPE_OP_CHECK, &pending))
+ if (test_bit(STRIPE_OP_CHECK, &ops_request))
ops_run_check(sh);
if (overlap_clear)
@@ -1961,8 +1967,7 @@ static int __handle_issuing_new_read_requests5(struct stripe_head *sh,
/* don't schedule compute operations or reads on the parity block while
* a check is in flight
*/
- if ((disk_idx == sh->pd_idx) &&
- test_bit(STRIPE_OP_CHECK, &sh->ops.pending))
+ if (disk_idx == sh->pd_idx && sh->check_state)
return ~0;
/* is the data in this block needed, and can we get it? */
@@ -1983,9 +1988,8 @@ static int __handle_issuing_new_read_requests5(struct stripe_head *sh,
* 3/ We hold off parity block re-reads until check operations
* have quiesced.
*/
- if ((s->uptodate == disks - 1) &&
- (s->failed && disk_idx == s->failed_num) &&
- !test_bit(STRIPE_OP_CHECK, &sh->ops.pending)) {
+ if ((s->uptodate == disks - 1) && !sh->check_state &&
+ (s->failed && disk_idx == s->failed_num)) {
set_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending);
set_bit(R5_Wantcompute, &dev->flags);
sh->ops.target = disk_idx;
@@ -2021,12 +2025,8 @@ static void handle_issuing_new_read_requests5(struct stripe_head *sh,
{
int i;
- /* Clear completed compute operations. Parity recovery
- * (STRIPE_OP_MOD_REPAIR_PD) implies a write-back which is handled
- * later on in this routine
- */
- if (test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete) &&
- !test_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending)) {
+ /* Clear completed compute operations */
+ if (test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete)) {
clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete);
clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.ack);
clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending);
@@ -2350,90 +2350,85 @@ static void handle_issuing_new_write_requests6(raid5_conf_t *conf,
static void handle_parity_checks5(raid5_conf_t *conf, struct stripe_head *sh,
struct stripe_head_state *s, int disks)
{
- int canceled_check = 0;
+ struct r5dev *dev = NULL;
set_bit(STRIPE_HANDLE, &sh->state);
- /* complete a check operation */
- if (test_and_clear_bit(STRIPE_OP_CHECK, &sh->ops.complete)) {
- clear_bit(STRIPE_OP_CHECK, &sh->ops.ack);
- clear_bit(STRIPE_OP_CHECK, &sh->ops.pending);
+ switch (sh->check_state) {
+ case check_state_idle:
+ /* start a new check operation if there are no failures */
if (s->failed == 0) {
- if (sh->ops.zero_sum_result == 0)
- /* parity is correct (on disc,
- * not in buffer any more)
- */
- set_bit(STRIPE_INSYNC, &sh->state);
- else {
- conf->mddev->resync_mismatches +=
- STRIPE_SECTORS;
- if (test_bit(
- MD_RECOVERY_CHECK, &conf->mddev->recovery))
- /* don't try to repair!! */
- set_bit(STRIPE_INSYNC, &sh->state);
- else {
- set_bit(STRIPE_OP_COMPUTE_BLK,
- &sh->ops.pending);
- set_bit(STRIPE_OP_MOD_REPAIR_PD,
- &sh->ops.pending);
- set_bit(R5_Wantcompute,
- &sh->dev[sh->pd_idx].flags);
- sh->ops.target = sh->pd_idx;
- sh->ops.count++;
- s->uptodate++;
- }
- }
- } else
- canceled_check = 1; /* STRIPE_INSYNC is not set */
- }
-
- /* start a new check operation if there are no failures, the stripe is
- * not insync, and a repair is not in flight
- */
- if (s->failed == 0 &&
- !test_bit(STRIPE_INSYNC, &sh->state) &&
- !test_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending)) {
- if (!test_and_set_bit(STRIPE_OP_CHECK, &sh->ops.pending)) {
BUG_ON(s->uptodate != disks);
+ sh->check_state = check_state_run;
+ set_bit(STRIPE_OP_CHECK, &s->ops_request);
clear_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags);
- sh->ops.count++;
s->uptodate--;
+ break;
}
- }
-
- /* check if we can clear a parity disk reconstruct */
- if (test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete) &&
- test_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending)) {
-
- clear_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending);
- clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete);
- clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.ack);
- clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending);
- }
-
+ dev = &sh->dev[s->failed_num];
+ /* fall through */
+ case check_state_compute_result:
+ sh->check_state = check_state_idle;
+ if (!dev)
+ dev = &sh->dev[sh->pd_idx];
+
+ /* check that a write has not made the stripe insync */
+ if (test_bit(STRIPE_INSYNC, &sh->state))
+ break;
- /* Wait for check parity and compute block operations to complete
- * before write-back. If a failure occurred while the check operation
- * was in flight we need to cycle this stripe through handle_stripe
- * since the parity block may not be uptodate
- */
- if (!canceled_check && !test_bit(STRIPE_INSYNC, &sh->state) &&
- !test_bit(STRIPE_OP_CHECK, &sh->ops.pending) &&
- !test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending)) {
- struct r5dev *dev;
/* either failed parity check, or recovery is happening */
- if (s->failed == 0)
- s->failed_num = sh->pd_idx;
- dev = &sh->dev[s->failed_num];
BUG_ON(!test_bit(R5_UPTODATE, &dev->flags));
BUG_ON(s->uptodate != disks);
set_bit(R5_LOCKED, &dev->flags);
+ s->locked++;
set_bit(R5_Wantwrite, &dev->flags);
clear_bit(STRIPE_DEGRADED, &sh->state);
- s->locked++;
set_bit(STRIPE_INSYNC, &sh->state);
+ break;
+ case check_state_run:
+ break; /* we will be called again upon completion */
+ case check_state_check_result:
+ sh->check_state = check_state_idle;
+
+ /* if a failure occurred during the check operation, leave
+ * STRIPE_INSYNC not set and let the stripe be handled again
+ */
+ if (s->failed)
+ break;
+
+ /* handle a successful check operation, if parity is correct
+ * we are done. Otherwise update the mismatch count and repair
+ * parity if !MD_RECOVERY_CHECK
+ */
+ if (sh->ops.zero_sum_result == 0)
+ /* parity is correct (on disc,
+ * not in buffer any more)
+ */
+ set_bit(STRIPE_INSYNC, &sh->state);
+ else {
+ conf->mddev->resync_mismatches += STRIPE_SECTORS;
+ if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery))
+ /* don't try to repair!! */
+ set_bit(STRIPE_INSYNC, &sh->state);
+ else {
+ sh->check_state = check_state_compute_run;
+ set_bit(STRIPE_OP_COMPUTE_BLK, &s->ops_request);
+ set_bit(R5_Wantcompute,
+ &sh->dev[sh->pd_idx].flags);
+ sh->ops.target = sh->pd_idx;
+ s->uptodate++;
+ }
+ }
+ break;
+ case check_state_compute_run:
+ break;
+ default:
+ printk(KERN_ERR "%s: unknown check_state: %d sector: %llu\n",
+ __func__, sh->check_state,
+ (unsigned long long) sh->sector);
+ BUG();
}
}
@@ -2807,7 +2802,7 @@ static void handle_stripe5(struct stripe_head *sh)
* block.
*/
if (s.to_write && !test_bit(STRIPE_OP_POSTXOR, &sh->ops.pending) &&
- !test_bit(STRIPE_OP_CHECK, &sh->ops.pending))
+ !sh->check_state)
handle_issuing_new_write_requests5(conf, sh, &s, disks);
/* maybe we need to check and possibly fix the parity for this stripe
@@ -2815,11 +2810,10 @@ static void handle_stripe5(struct stripe_head *sh)
* data is available. The parity check is held off while parity
* dependent operations are in flight.
*/
- if ((s.syncing && s.locked == 0 &&
+ if (sh->check_state ||
+ (s.syncing && s.locked == 0 &&
!test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending) &&
- !test_bit(STRIPE_INSYNC, &sh->state)) ||
- test_bit(STRIPE_OP_CHECK, &sh->ops.pending) ||
- test_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending))
+ !test_bit(STRIPE_INSYNC, &sh->state)))
handle_parity_checks5(conf, sh, &s, disks);
if (s.syncing && s.locked == 0 && test_bit(STRIPE_INSYNC, &sh->state)) {
@@ -2897,8 +2891,8 @@ static void handle_stripe5(struct stripe_head *sh)
if (unlikely(blocked_rdev))
md_wait_for_blocked_rdev(blocked_rdev, conf->mddev);
- if (pending)
- raid5_run_ops(sh, pending);
+ if (pending || s.ops_request)
+ raid5_run_ops(sh, pending, s.ops_request);
ops_run_io(sh, &s);
diff --git a/include/linux/raid/raid5.h b/include/linux/raid/raid5.h
index 1301195abf4b..2c96d5fd54bf 100644
--- a/include/linux/raid/raid5.h
+++ b/include/linux/raid/raid5.h
@@ -158,6 +158,41 @@
* the compute block completes.
*/
+/*
+ * Operations state - intermediate states that are visible outside of sh->lock
+ * In general _idle indicates nothing is running, _run indicates a data
+ * processing operation is active, and _result means the data processing result
+ * is stable and can be acted upon. For simple operations like biofill and
+ * compute that only have an _idle and _run state they are indicated with
+ * sh->state flags (STRIPE_BIOFILL_RUN and STRIPE_COMPUTE_RUN)
+ */
+/**
+ * enum check_states - handles syncing / repairing a stripe
+ * @check_state_idle - check operations are quiesced
+ * @check_state_run - check operation is running
+ * @check_state_result - set outside lock when check result is valid
+ * @check_state_compute_run - check failed and we are repairing
+ * @check_state_compute_result - set outside lock when compute result is valid
+ */
+enum check_states {
+ check_state_idle = 0,
+ check_state_run, /* parity check */
+ check_state_check_result,
+ check_state_compute_run, /* parity repair */
+ check_state_compute_result,
+};
+
+/**
+ * enum reconstruct_states - handles writing or expanding a stripe
+ */
+enum reconstruct_states {
+ reconstruct_state_idle = 0,
+ reconstruct_state_drain_run, /* write */
+ reconstruct_state_run, /* expand */
+ reconstruct_state_drain_result,
+ reconstruct_state_result,
+};
+
struct stripe_head {
struct hlist_node hash;
struct list_head lru; /* inactive_list or handle_list */
@@ -169,6 +204,7 @@ struct stripe_head {
spinlock_t lock;
int bm_seq; /* sequence number for bitmap flushes */
int disks; /* disks in stripe */
+ enum check_states check_state;
/* stripe_operations
* @pending - pending ops flags (set for request->issue->complete)
* @ack - submitted ops flags (set for issue->complete)
@@ -202,6 +238,7 @@ struct stripe_head_state {
int locked, uptodate, to_read, to_write, failed, written;
int to_fill, compute, req_compute, non_overwrite;
int failed_num;
+ unsigned long ops_request;
};
/* r6_state - extra state data only relevant to r6 */
@@ -254,8 +291,10 @@ struct r6_state {
#define STRIPE_EXPAND_READY 11
#define STRIPE_IO_STARTED 12 /* do not count towards 'bypass_count' */
#define STRIPE_FULL_WRITE 13 /* all blocks are set to be overwritten */
+#define STRIPE_BIOFILL_RUN 14
+#define STRIPE_COMPUTE_RUN 15
/*
- * Operations flags (in issue order)
+ * Operation request flags
*/
#define STRIPE_OP_BIOFILL 0
#define STRIPE_OP_COMPUTE_BLK 1
@@ -264,11 +303,6 @@ struct r6_state {
#define STRIPE_OP_POSTXOR 4
#define STRIPE_OP_CHECK 5
-/* modifiers to the base operations
- * STRIPE_OP_MOD_REPAIR_PD - compute the parity block and write it back
- */
-#define STRIPE_OP_MOD_REPAIR_PD 7
-
/*
* Plugging:
*
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-19 19:39:11 +0300