diff options
| -rw-r--r-- | drivers/tty/serial/8250/8250_omap.c | 82 |
1 files changed, 61 insertions, 21 deletions
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index b4c246d5fadf..fb709e08fc66 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -105,6 +105,8 @@ struct omap8250_priv { u8 delayed_restore; u16 quot; + u8 tx_trigger; + u8 rx_trigger; bool is_suspending; int wakeirq; int wakeups_enabled; @@ -118,6 +120,17 @@ struct omap8250_priv { bool throttled; }; +struct omap8250_dma_params { + u32 rx_size; + u8 rx_trigger; + u8 tx_trigger; +}; + +struct omap8250_platdata { + struct omap8250_dma_params *dma_params; + u8 habit; +}; + #ifdef CONFIG_SERIAL_8250_DMA static void omap_8250_rx_dma_flush(struct uart_8250_port *p); #else @@ -295,8 +308,8 @@ static void omap8250_restore_regs(struct uart_8250_port *up) serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_RESTORE(16) | OMAP_UART_TCR_HALT(52)); serial_out(up, UART_TI752_TLR, - TRIGGER_TLR_MASK(TX_TRIGGER) << UART_TI752_TLR_TX | - TRIGGER_TLR_MASK(RX_TRIGGER) << UART_TI752_TLR_RX); + TRIGGER_TLR_MASK(priv->tx_trigger) << UART_TI752_TLR_TX | + TRIGGER_TLR_MASK(priv->rx_trigger) << UART_TI752_TLR_RX); serial_out(up, UART_LCR, 0); @@ -435,8 +448,8 @@ static void omap_8250_set_termios(struct uart_port *port, * This is because threshold and trigger values are the same. */ up->fcr = UART_FCR_ENABLE_FIFO; - up->fcr |= TRIGGER_FCR_MASK(TX_TRIGGER) << OMAP_UART_FCR_TX_TRIG; - up->fcr |= TRIGGER_FCR_MASK(RX_TRIGGER) << OMAP_UART_FCR_RX_TRIG; + up->fcr |= TRIGGER_FCR_MASK(priv->tx_trigger) << OMAP_UART_FCR_TX_TRIG; + up->fcr |= TRIGGER_FCR_MASK(priv->rx_trigger) << OMAP_UART_FCR_RX_TRIG; priv->scr = OMAP_UART_SCR_RX_TRIG_GRANU1_MASK | OMAP_UART_SCR_TX_EMPTY | OMAP_UART_SCR_TX_TRIG_GRANU1_MASK; @@ -1092,18 +1105,30 @@ static int omap8250_no_handle_irq(struct uart_port *port) return 0; } -static const u8 omap4_habit = UART_ERRATA_CLOCK_DISABLE; -static const u8 am3352_habit = OMAP_DMA_TX_KICK | UART_ERRATA_CLOCK_DISABLE; -static const u8 dra742_habit = UART_ERRATA_CLOCK_DISABLE; +static struct omap8250_dma_params am33xx_dma = { + .rx_size = RX_TRIGGER, + .rx_trigger = RX_TRIGGER, + .tx_trigger = TX_TRIGGER, +}; + +static struct omap8250_platdata am33xx_platdata = { + .dma_params = &am33xx_dma, + .habit = OMAP_DMA_TX_KICK | UART_ERRATA_CLOCK_DISABLE, +}; + +static struct omap8250_platdata omap4_platdata = { + .dma_params = &am33xx_dma, + .habit = UART_ERRATA_CLOCK_DISABLE, +}; static const struct of_device_id omap8250_dt_ids[] = { { .compatible = "ti,am654-uart" }, { .compatible = "ti,omap2-uart" }, { .compatible = "ti,omap3-uart" }, - { .compatible = "ti,omap4-uart", .data = &omap4_habit, }, - { .compatible = "ti,am3352-uart", .data = &am3352_habit, }, - { .compatible = "ti,am4372-uart", .data = &am3352_habit, }, - { .compatible = "ti,dra742-uart", .data = &dra742_habit, }, + { .compatible = "ti,omap4-uart", .data = &omap4_platdata, }, + { .compatible = "ti,am3352-uart", .data = &am33xx_platdata, }, + { .compatible = "ti,am4372-uart", .data = &am33xx_platdata, }, + { .compatible = "ti,dra742-uart", .data = &omap4_platdata, }, {}, }; MODULE_DEVICE_TABLE(of, omap8250_dt_ids); @@ -1114,10 +1139,10 @@ static int omap8250_probe(struct platform_device *pdev) struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); struct device_node *np = pdev->dev.of_node; struct omap8250_priv *priv; + const struct omap8250_platdata *pdata; struct uart_8250_port up; int ret; void __iomem *membase; - const struct of_device_id *id; if (!regs || !irq) { dev_err(&pdev->dev, "missing registers or irq\n"); @@ -1198,9 +1223,9 @@ static int omap8250_probe(struct platform_device *pdev) priv->wakeirq = irq_of_parse_and_map(np, 1); - id = of_match_device(of_match_ptr(omap8250_dt_ids), &pdev->dev); - if (id && id->data) - priv->habit |= *(u8 *)id->data; + pdata = of_device_get_match_data(&pdev->dev); + if (pdata) + priv->habit |= pdata->habit; if (!up.port.uartclk) { up.port.uartclk = DEFAULT_CLK_SPEED; @@ -1237,6 +1262,8 @@ static int omap8250_probe(struct platform_device *pdev) omap_serial_fill_features_erratas(&up, priv); up.port.handle_irq = omap8250_no_handle_irq; + priv->rx_trigger = RX_TRIGGER; + priv->tx_trigger = TX_TRIGGER; #ifdef CONFIG_SERIAL_8250_DMA /* * Oh DMA support. If there are no DMA properties in the DT then @@ -1248,13 +1275,26 @@ static int omap8250_probe(struct platform_device *pdev) */ ret = of_property_count_strings(np, "dma-names"); if (ret == 2) { + struct omap8250_dma_params *dma_params = NULL; + up.dma = &priv->omap8250_dma; - priv->omap8250_dma.fn = the_no_dma_filter_fn; - priv->omap8250_dma.tx_dma = omap_8250_tx_dma; - priv->omap8250_dma.rx_dma = omap_8250_rx_dma; - priv->omap8250_dma.rx_size = RX_TRIGGER; - priv->omap8250_dma.rxconf.src_maxburst = RX_TRIGGER; - priv->omap8250_dma.txconf.dst_maxburst = TX_TRIGGER; + up.dma->fn = the_no_dma_filter_fn; + up.dma->tx_dma = omap_8250_tx_dma; + up.dma->rx_dma = omap_8250_rx_dma; + if (pdata) + dma_params = pdata->dma_params; + + if (dma_params) { + up.dma->rx_size = dma_params->rx_size; + up.dma->rxconf.src_maxburst = dma_params->rx_trigger; + up.dma->txconf.dst_maxburst = dma_params->tx_trigger; + priv->rx_trigger = dma_params->rx_trigger; + priv->tx_trigger = dma_params->tx_trigger; + } else { + up.dma->rx_size = RX_TRIGGER; + up.dma->rxconf.src_maxburst = RX_TRIGGER; + up.dma->txconf.dst_maxburst = TX_TRIGGER; + } } #endif ret = serial8250_register_8250_port(&up); |